Commit | Line | Data |
---|---|---|
56f5b1cf PZ |
1 | /* |
2 | * core.h - DesignWare HS OTG Controller common declarations | |
3 | * | |
4 | * Copyright (C) 2004-2013 Synopsys, Inc. | |
5 | * | |
6 | * Redistribution and use in source and binary forms, with or without | |
7 | * modification, are permitted provided that the following conditions | |
8 | * are met: | |
9 | * 1. Redistributions of source code must retain the above copyright | |
10 | * notice, this list of conditions, and the following disclaimer, | |
11 | * without modification. | |
12 | * 2. Redistributions in binary form must reproduce the above copyright | |
13 | * notice, this list of conditions and the following disclaimer in the | |
14 | * documentation and/or other materials provided with the distribution. | |
15 | * 3. The names of the above-listed copyright holders may not be used | |
16 | * to endorse or promote products derived from this software without | |
17 | * specific prior written permission. | |
18 | * | |
19 | * ALTERNATIVELY, this software may be distributed under the terms of the | |
20 | * GNU General Public License ("GPL") as published by the Free Software | |
21 | * Foundation; either version 2 of the License, or (at your option) any | |
22 | * later version. | |
23 | * | |
24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS | |
25 | * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, | |
26 | * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
27 | * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR | |
28 | * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
29 | * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
30 | * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR | |
31 | * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
32 | * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
33 | * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
34 | * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
35 | */ | |
36 | ||
37 | #ifndef __DWC2_CORE_H__ | |
38 | #define __DWC2_CORE_H__ | |
39 | ||
f7c0b143 DN |
40 | #include <linux/phy/phy.h> |
41 | #include <linux/regulator/consumer.h> | |
42 | #include <linux/usb/gadget.h> | |
43 | #include <linux/usb/otg.h> | |
56f5b1cf PZ |
44 | #include <linux/usb/phy.h> |
45 | #include "hw.h" | |
46 | ||
47 | #ifdef DWC2_LOG_WRITES | |
48 | static inline void do_write(u32 value, void *addr) | |
49 | { | |
50 | writel(value, addr); | |
51 | pr_info("INFO:: wrote %08x to %p\n", value, addr); | |
52 | } | |
53 | ||
54 | #undef writel | |
55 | #define writel(v, a) do_write(v, a) | |
56 | #endif | |
57 | ||
58 | /* Maximum number of Endpoints/HostChannels */ | |
59 | #define MAX_EPS_CHANNELS 16 | |
60 | ||
f7c0b143 DN |
61 | /* s3c-hsotg declarations */ |
62 | static const char * const s3c_hsotg_supply_names[] = { | |
63 | "vusb_d", /* digital USB supply, 1.2V */ | |
64 | "vusb_a", /* analog USB supply, 1.1V */ | |
65 | }; | |
66 | ||
67 | /* | |
68 | * EP0_MPS_LIMIT | |
69 | * | |
70 | * Unfortunately there seems to be a limit of the amount of data that can | |
71 | * be transferred by IN transactions on EP0. This is either 127 bytes or 3 | |
72 | * packets (which practically means 1 packet and 63 bytes of data) when the | |
73 | * MPS is set to 64. | |
74 | * | |
75 | * This means if we are wanting to move >127 bytes of data, we need to | |
76 | * split the transactions up, but just doing one packet at a time does | |
77 | * not work (this may be an implicit DATA0 PID on first packet of the | |
78 | * transaction) and doing 2 packets is outside the controller's limits. | |
79 | * | |
80 | * If we try to lower the MPS size for EP0, then no transfers work properly | |
81 | * for EP0, and the system will fail basic enumeration. As no cause for this | |
82 | * has currently been found, we cannot support any large IN transfers for | |
83 | * EP0. | |
84 | */ | |
85 | #define EP0_MPS_LIMIT 64 | |
86 | ||
941fcce4 | 87 | struct dwc2_hsotg; |
f7c0b143 DN |
88 | struct s3c_hsotg_req; |
89 | ||
90 | /** | |
91 | * struct s3c_hsotg_ep - driver endpoint definition. | |
92 | * @ep: The gadget layer representation of the endpoint. | |
93 | * @name: The driver generated name for the endpoint. | |
94 | * @queue: Queue of requests for this endpoint. | |
95 | * @parent: Reference back to the parent device structure. | |
96 | * @req: The current request that the endpoint is processing. This is | |
97 | * used to indicate an request has been loaded onto the endpoint | |
98 | * and has yet to be completed (maybe due to data move, or simply | |
99 | * awaiting an ack from the core all the data has been completed). | |
100 | * @debugfs: File entry for debugfs file for this endpoint. | |
101 | * @lock: State lock to protect contents of endpoint. | |
102 | * @dir_in: Set to true if this endpoint is of the IN direction, which | |
103 | * means that it is sending data to the Host. | |
104 | * @index: The index for the endpoint registers. | |
105 | * @mc: Multi Count - number of transactions per microframe | |
106 | * @interval - Interval for periodic endpoints | |
107 | * @name: The name array passed to the USB core. | |
108 | * @halted: Set if the endpoint has been halted. | |
109 | * @periodic: Set if this is a periodic ep, such as Interrupt | |
110 | * @isochronous: Set if this is a isochronous ep | |
111 | * @sent_zlp: Set if we've sent a zero-length packet. | |
112 | * @total_data: The total number of data bytes done. | |
113 | * @fifo_size: The size of the FIFO (for periodic IN endpoints) | |
114 | * @fifo_load: The amount of data loaded into the FIFO (periodic IN) | |
115 | * @last_load: The offset of data for the last start of request. | |
116 | * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN | |
117 | * | |
118 | * This is the driver's state for each registered enpoint, allowing it | |
119 | * to keep track of transactions that need doing. Each endpoint has a | |
120 | * lock to protect the state, to try and avoid using an overall lock | |
121 | * for the host controller as much as possible. | |
122 | * | |
123 | * For periodic IN endpoints, we have fifo_size and fifo_load to try | |
124 | * and keep track of the amount of data in the periodic FIFO for each | |
125 | * of these as we don't have a status register that tells us how much | |
126 | * is in each of them. (note, this may actually be useless information | |
127 | * as in shared-fifo mode periodic in acts like a single-frame packet | |
128 | * buffer than a fifo) | |
129 | */ | |
130 | struct s3c_hsotg_ep { | |
131 | struct usb_ep ep; | |
132 | struct list_head queue; | |
941fcce4 | 133 | struct dwc2_hsotg *parent; |
f7c0b143 DN |
134 | struct s3c_hsotg_req *req; |
135 | struct dentry *debugfs; | |
136 | ||
137 | unsigned long total_data; | |
138 | unsigned int size_loaded; | |
139 | unsigned int last_load; | |
140 | unsigned int fifo_load; | |
141 | unsigned short fifo_size; | |
b203d0a2 | 142 | unsigned short fifo_index; |
f7c0b143 DN |
143 | |
144 | unsigned char dir_in; | |
145 | unsigned char index; | |
146 | unsigned char mc; | |
147 | unsigned char interval; | |
148 | ||
149 | unsigned int halted:1; | |
150 | unsigned int periodic:1; | |
151 | unsigned int isochronous:1; | |
152 | unsigned int sent_zlp:1; | |
153 | ||
154 | char name[10]; | |
155 | }; | |
156 | ||
f7c0b143 DN |
157 | /** |
158 | * struct s3c_hsotg_req - data transfer request | |
159 | * @req: The USB gadget request | |
160 | * @queue: The list of requests for the endpoint this is queued for. | |
161 | * @in_progress: Has already had size/packets written to core | |
162 | * @mapped: DMA buffer for this request has been mapped via dma_map_single(). | |
163 | */ | |
164 | struct s3c_hsotg_req { | |
165 | struct usb_request req; | |
166 | struct list_head queue; | |
167 | unsigned char in_progress; | |
168 | unsigned char mapped; | |
169 | }; | |
170 | ||
941fcce4 | 171 | #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) |
f7c0b143 DN |
172 | #define call_gadget(_hs, _entry) \ |
173 | do { \ | |
174 | if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ | |
175 | (_hs)->driver && (_hs)->driver->_entry) { \ | |
176 | spin_unlock(&_hs->lock); \ | |
177 | (_hs)->driver->_entry(&(_hs)->gadget); \ | |
178 | spin_lock(&_hs->lock); \ | |
179 | } \ | |
180 | } while (0) | |
941fcce4 DN |
181 | #else |
182 | #define call_gadget(_hs, _entry) do {} while (0) | |
183 | #endif | |
f7c0b143 | 184 | |
56f5b1cf PZ |
185 | struct dwc2_hsotg; |
186 | struct dwc2_host_chan; | |
187 | ||
188 | /* Device States */ | |
189 | enum dwc2_lx_state { | |
190 | DWC2_L0, /* On state */ | |
191 | DWC2_L1, /* LPM sleep state */ | |
192 | DWC2_L2, /* USB suspend state */ | |
193 | DWC2_L3, /* Off state */ | |
194 | }; | |
195 | ||
196 | /** | |
197 | * struct dwc2_core_params - Parameters for configuring the core | |
198 | * | |
91121c10 MK |
199 | * @otg_cap: Specifies the OTG capabilities. |
200 | * 0 - HNP and SRP capable | |
56f5b1cf | 201 | * 1 - SRP Only capable |
91121c10 MK |
202 | * 2 - No HNP/SRP capable (always available) |
203 | * Defaults to best available option (0, 1, then 2) | |
725acc86 | 204 | * @otg_ver: OTG version supported |
91121c10 | 205 | * 0 - 1.3 (default) |
725acc86 | 206 | * 1 - 2.0 |
56f5b1cf PZ |
207 | * @dma_enable: Specifies whether to use slave or DMA mode for accessing |
208 | * the data FIFOs. The driver will automatically detect the | |
209 | * value for this parameter if none is specified. | |
91121c10 | 210 | * 0 - Slave (always available) |
56f5b1cf PZ |
211 | * 1 - DMA (default, if available) |
212 | * @dma_desc_enable: When DMA mode is enabled, specifies whether to use | |
213 | * address DMA mode or descriptor DMA mode for accessing | |
214 | * the data FIFOs. The driver will automatically detect the | |
215 | * value for this if none is specified. | |
216 | * 0 - Address DMA | |
217 | * 1 - Descriptor DMA (default, if available) | |
218 | * @speed: Specifies the maximum speed of operation in host and | |
219 | * device mode. The actual speed depends on the speed of | |
220 | * the attached device and the value of phy_type. | |
91121c10 MK |
221 | * 0 - High Speed |
222 | * (default when phy_type is UTMI+ or ULPI) | |
56f5b1cf | 223 | * 1 - Full Speed |
91121c10 | 224 | * (default when phy_type is Full Speed) |
56f5b1cf | 225 | * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters |
91121c10 | 226 | * 1 - Allow dynamic FIFO sizing (default, if available) |
725acc86 PZ |
227 | * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs |
228 | * are enabled | |
56f5b1cf PZ |
229 | * @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when |
230 | * dynamic FIFO sizing is enabled | |
91121c10 MK |
231 | * 16 to 32768 |
232 | * Actual maximum value is autodetected and also | |
233 | * the default. | |
56f5b1cf PZ |
234 | * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO |
235 | * in host mode when dynamic FIFO sizing is enabled | |
91121c10 MK |
236 | * 16 to 32768 |
237 | * Actual maximum value is autodetected and also | |
238 | * the default. | |
56f5b1cf PZ |
239 | * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in |
240 | * host mode when dynamic FIFO sizing is enabled | |
91121c10 MK |
241 | * 16 to 32768 |
242 | * Actual maximum value is autodetected and also | |
243 | * the default. | |
56f5b1cf | 244 | * @max_transfer_size: The maximum transfer size supported, in bytes |
91121c10 MK |
245 | * 2047 to 65,535 |
246 | * Actual maximum value is autodetected and also | |
247 | * the default. | |
56f5b1cf | 248 | * @max_packet_count: The maximum number of packets in a transfer |
91121c10 MK |
249 | * 15 to 511 |
250 | * Actual maximum value is autodetected and also | |
251 | * the default. | |
56f5b1cf | 252 | * @host_channels: The number of host channel registers to use |
91121c10 MK |
253 | * 1 to 16 |
254 | * Actual maximum value is autodetected and also | |
255 | * the default. | |
56f5b1cf PZ |
256 | * @phy_type: Specifies the type of PHY interface to use. By default, |
257 | * the driver will automatically detect the phy_type. | |
91121c10 MK |
258 | * 0 - Full Speed Phy |
259 | * 1 - UTMI+ Phy | |
260 | * 2 - ULPI Phy | |
261 | * Defaults to best available option (2, 1, then 0) | |
56f5b1cf PZ |
262 | * @phy_utmi_width: Specifies the UTMI+ Data Width (in bits). This parameter |
263 | * is applicable for a phy_type of UTMI+ or ULPI. (For a | |
264 | * ULPI phy_type, this parameter indicates the data width | |
265 | * between the MAC and the ULPI Wrapper.) Also, this | |
266 | * parameter is applicable only if the OTG_HSPHY_WIDTH cC | |
267 | * parameter was set to "8 and 16 bits", meaning that the | |
268 | * core has been configured to work at either data path | |
269 | * width. | |
91121c10 | 270 | * 8 or 16 (default 16 if available) |
56f5b1cf PZ |
271 | * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single |
272 | * data rate. This parameter is only applicable if phy_type | |
273 | * is ULPI. | |
274 | * 0 - single data rate ULPI interface with 8 bit wide | |
275 | * data bus (default) | |
276 | * 1 - double data rate ULPI interface with 4 bit wide | |
277 | * data bus | |
278 | * @phy_ulpi_ext_vbus: For a ULPI phy, specifies whether to use the internal or | |
279 | * external supply to drive the VBus | |
91121c10 MK |
280 | * 0 - Internal supply (default) |
281 | * 1 - External supply | |
56f5b1cf PZ |
282 | * @i2c_enable: Specifies whether to use the I2Cinterface for a full |
283 | * speed PHY. This parameter is only applicable if phy_type | |
284 | * is FS. | |
285 | * 0 - No (default) | |
286 | * 1 - Yes | |
91121c10 MK |
287 | * @ulpi_fs_ls: Make ULPI phy operate in FS/LS mode only |
288 | * 0 - No (default) | |
289 | * 1 - Yes | |
725acc86 PZ |
290 | * @host_support_fs_ls_low_power: Specifies whether low power mode is supported |
291 | * when attached to a Full Speed or Low Speed device in | |
292 | * host mode. | |
293 | * 0 - Don't support low power mode (default) | |
294 | * 1 - Support low power mode | |
295 | * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode | |
91121c10 MK |
296 | * when connected to a Low Speed device in host |
297 | * mode. This parameter is applicable only if | |
298 | * host_support_fs_ls_low_power is enabled. | |
725acc86 | 299 | * 0 - 48 MHz |
91121c10 | 300 | * (default when phy_type is UTMI+ or ULPI) |
725acc86 | 301 | * 1 - 6 MHz |
91121c10 MK |
302 | * (default when phy_type is Full Speed) |
303 | * @ts_dline: Enable Term Select Dline pulsing | |
304 | * 0 - No (default) | |
305 | * 1 - Yes | |
306 | * @reload_ctl: Allow dynamic reloading of HFIR register during runtime | |
307 | * 0 - No (default for core < 2.92a) | |
308 | * 1 - Yes (default for core >= 2.92a) | |
4d3190e1 PZ |
309 | * @ahbcfg: This field allows the default value of the GAHBCFG |
310 | * register to be overridden | |
91121c10 MK |
311 | * -1 - GAHBCFG value will be set to 0x06 |
312 | * (INCR4, default) | |
4d3190e1 PZ |
313 | * all others - GAHBCFG value will be overridden with |
314 | * this value | |
91121c10 MK |
315 | * Not all bits can be controlled like this, the |
316 | * bits defined by GAHBCFG_CTRL_MASK are controlled | |
317 | * by the driver and are ignored in this | |
318 | * configuration value. | |
20f2eb9c | 319 | * @uframe_sched: True to enable the microframe scheduler |
56f5b1cf PZ |
320 | * |
321 | * The following parameters may be specified when starting the module. These | |
91121c10 MK |
322 | * parameters define how the DWC_otg controller should be configured. A |
323 | * value of -1 (or any other out of range value) for any parameter means | |
324 | * to read the value from hardware (if possible) or use the builtin | |
325 | * default described above. | |
56f5b1cf PZ |
326 | */ |
327 | struct dwc2_core_params { | |
8284f93b MK |
328 | /* |
329 | * Don't add any non-int members here, this will break | |
330 | * dwc2_set_all_params! | |
331 | */ | |
56f5b1cf PZ |
332 | int otg_cap; |
333 | int otg_ver; | |
334 | int dma_enable; | |
335 | int dma_desc_enable; | |
336 | int speed; | |
337 | int enable_dynamic_fifo; | |
338 | int en_multiple_tx_fifo; | |
339 | int host_rx_fifo_size; | |
340 | int host_nperio_tx_fifo_size; | |
341 | int host_perio_tx_fifo_size; | |
342 | int max_transfer_size; | |
343 | int max_packet_count; | |
344 | int host_channels; | |
345 | int phy_type; | |
346 | int phy_utmi_width; | |
347 | int phy_ulpi_ddr; | |
348 | int phy_ulpi_ext_vbus; | |
349 | int i2c_enable; | |
350 | int ulpi_fs_ls; | |
351 | int host_support_fs_ls_low_power; | |
352 | int host_ls_low_power_phy_clk; | |
353 | int ts_dline; | |
354 | int reload_ctl; | |
4d3190e1 | 355 | int ahbcfg; |
20f2eb9c | 356 | int uframe_sched; |
56f5b1cf PZ |
357 | }; |
358 | ||
9badec2f MK |
359 | /** |
360 | * struct dwc2_hw_params - Autodetected parameters. | |
361 | * | |
362 | * These parameters are the various parameters read from hardware | |
363 | * registers during initialization. They typically contain the best | |
364 | * supported or maximum value that can be configured in the | |
365 | * corresponding dwc2_core_params value. | |
366 | * | |
367 | * The values that are not in dwc2_core_params are documented below. | |
368 | * | |
369 | * @op_mode Mode of Operation | |
370 | * 0 - HNP- and SRP-Capable OTG (Host & Device) | |
371 | * 1 - SRP-Capable OTG (Host & Device) | |
372 | * 2 - Non-HNP and Non-SRP Capable OTG (Host & Device) | |
373 | * 3 - SRP-Capable Device | |
374 | * 4 - Non-OTG Device | |
375 | * 5 - SRP-Capable Host | |
376 | * 6 - Non-OTG Host | |
377 | * @arch Architecture | |
378 | * 0 - Slave only | |
379 | * 1 - External DMA | |
380 | * 2 - Internal DMA | |
381 | * @power_optimized Are power optimizations enabled? | |
382 | * @num_dev_ep Number of device endpoints available | |
383 | * @num_dev_perio_in_ep Number of device periodic IN endpoints | |
384 | * avaialable | |
385 | * @dev_token_q_depth Device Mode IN Token Sequence Learning Queue | |
386 | * Depth | |
387 | * 0 to 30 | |
388 | * @host_perio_tx_q_depth | |
389 | * Host Mode Periodic Request Queue Depth | |
390 | * 2, 4 or 8 | |
391 | * @nperio_tx_q_depth | |
392 | * Non-Periodic Request Queue Depth | |
393 | * 2, 4 or 8 | |
394 | * @hs_phy_type High-speed PHY interface type | |
395 | * 0 - High-speed interface not supported | |
396 | * 1 - UTMI+ | |
397 | * 2 - ULPI | |
398 | * 3 - UTMI+ and ULPI | |
399 | * @fs_phy_type Full-speed PHY interface type | |
400 | * 0 - Full speed interface not supported | |
401 | * 1 - Dedicated full speed interface | |
402 | * 2 - FS pins shared with UTMI+ pins | |
403 | * 3 - FS pins shared with ULPI pins | |
404 | * @total_fifo_size: Total internal RAM for FIFOs (bytes) | |
de4a1931 MK |
405 | * @utmi_phy_data_width UTMI+ PHY data width |
406 | * 0 - 8 bits | |
407 | * 1 - 16 bits | |
408 | * 2 - 8 or 16 bits | |
9badec2f MK |
409 | * @snpsid: Value from SNPSID register |
410 | */ | |
411 | struct dwc2_hw_params { | |
412 | unsigned op_mode:3; | |
413 | unsigned arch:2; | |
414 | unsigned dma_desc_enable:1; | |
415 | unsigned enable_dynamic_fifo:1; | |
416 | unsigned en_multiple_tx_fifo:1; | |
417 | unsigned host_rx_fifo_size:16; | |
418 | unsigned host_nperio_tx_fifo_size:16; | |
419 | unsigned host_perio_tx_fifo_size:16; | |
420 | unsigned nperio_tx_q_depth:3; | |
421 | unsigned host_perio_tx_q_depth:3; | |
422 | unsigned dev_token_q_depth:5; | |
423 | unsigned max_transfer_size:26; | |
424 | unsigned max_packet_count:11; | |
2d115547 | 425 | unsigned host_channels:5; |
9badec2f MK |
426 | unsigned hs_phy_type:2; |
427 | unsigned fs_phy_type:2; | |
428 | unsigned i2c_enable:1; | |
429 | unsigned num_dev_ep:4; | |
430 | unsigned num_dev_perio_in_ep:4; | |
431 | unsigned total_fifo_size:16; | |
432 | unsigned power_optimized:1; | |
de4a1931 | 433 | unsigned utmi_phy_data_width:2; |
9badec2f MK |
434 | u32 snpsid; |
435 | }; | |
436 | ||
56f5b1cf PZ |
437 | /** |
438 | * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic | |
439 | * and periodic schedules | |
440 | * | |
941fcce4 DN |
441 | * These are common for both host and peripheral modes: |
442 | * | |
56f5b1cf PZ |
443 | * @dev: The struct device pointer |
444 | * @regs: Pointer to controller regs | |
9badec2f MK |
445 | * @hw_params: Parameters that were autodetected from the |
446 | * hardware registers | |
941fcce4 | 447 | * @core_params: Parameters that define how the core should be configured |
56f5b1cf PZ |
448 | * @op_state: The operational State, during transitions (a_host=> |
449 | * a_peripheral and b_device=>b_host) this may not match | |
450 | * the core, but allows the software to determine | |
451 | * transitions | |
c0155b9d KY |
452 | * @dr_mode: Requested mode of operation, one of following: |
453 | * - USB_DR_MODE_PERIPHERAL | |
454 | * - USB_DR_MODE_HOST | |
455 | * - USB_DR_MODE_OTG | |
941fcce4 DN |
456 | * @lock: Spinlock that protects all the driver data structures |
457 | * @priv: Stores a pointer to the struct usb_hcd | |
56f5b1cf PZ |
458 | * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth |
459 | * transfer are in process of being queued | |
460 | * @srp_success: Stores status of SRP request in the case of a FS PHY | |
461 | * with an I2C interface | |
462 | * @wq_otg: Workqueue object used for handling of some interrupts | |
463 | * @wf_otg: Work object for handling Connector ID Status Change | |
464 | * interrupt | |
465 | * @wkp_timer: Timer object for handling Wakeup Detected interrupt | |
466 | * @lx_state: Lx state of connected device | |
941fcce4 DN |
467 | * |
468 | * These are for host mode: | |
469 | * | |
56f5b1cf PZ |
470 | * @flags: Flags for handling root port state changes |
471 | * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule. | |
472 | * Transfers associated with these QHs are not currently | |
473 | * assigned to a host channel. | |
474 | * @non_periodic_sched_active: Active QHs in the non-periodic schedule. | |
475 | * Transfers associated with these QHs are currently | |
476 | * assigned to a host channel. | |
477 | * @non_periodic_qh_ptr: Pointer to next QH to process in the active | |
478 | * non-periodic schedule | |
479 | * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a | |
480 | * list of QHs for periodic transfers that are _not_ | |
481 | * scheduled for the next frame. Each QH in the list has an | |
482 | * interval counter that determines when it needs to be | |
483 | * scheduled for execution. This scheduling mechanism | |
484 | * allows only a simple calculation for periodic bandwidth | |
485 | * used (i.e. must assume that all periodic transfers may | |
486 | * need to execute in the same frame). However, it greatly | |
487 | * simplifies scheduling and should be sufficient for the | |
488 | * vast majority of OTG hosts, which need to connect to a | |
489 | * small number of peripherals at one time. Items move from | |
490 | * this list to periodic_sched_ready when the QH interval | |
491 | * counter is 0 at SOF. | |
492 | * @periodic_sched_ready: List of periodic QHs that are ready for execution in | |
493 | * the next frame, but have not yet been assigned to host | |
494 | * channels. Items move from this list to | |
495 | * periodic_sched_assigned as host channels become | |
496 | * available during the current frame. | |
497 | * @periodic_sched_assigned: List of periodic QHs to be executed in the next | |
498 | * frame that are assigned to host channels. Items move | |
499 | * from this list to periodic_sched_queued as the | |
500 | * transactions for the QH are queued to the DWC_otg | |
501 | * controller. | |
502 | * @periodic_sched_queued: List of periodic QHs that have been queued for | |
503 | * execution. Items move from this list to either | |
504 | * periodic_sched_inactive or periodic_sched_ready when the | |
505 | * channel associated with the transfer is released. If the | |
506 | * interval for the QH is 1, the item moves to | |
507 | * periodic_sched_ready because it must be rescheduled for | |
508 | * the next frame. Otherwise, the item moves to | |
509 | * periodic_sched_inactive. | |
510 | * @periodic_usecs: Total bandwidth claimed so far for periodic transfers. | |
511 | * This value is in microseconds per (micro)frame. The | |
512 | * assumption is that all periodic transfers may occur in | |
513 | * the same (micro)frame. | |
20f2eb9c | 514 | * @frame_usecs: Internal variable used by the microframe scheduler |
56f5b1cf PZ |
515 | * @frame_number: Frame number read from the core at SOF. The value ranges |
516 | * from 0 to HFNUM_MAX_FRNUM. | |
517 | * @periodic_qh_count: Count of periodic QHs, if using several eps. Used for | |
518 | * SOF enable/disable. | |
519 | * @free_hc_list: Free host channels in the controller. This is a list of | |
520 | * struct dwc2_host_chan items. | |
521 | * @periodic_channels: Number of host channels assigned to periodic transfers. | |
522 | * Currently assuming that there is a dedicated host | |
523 | * channel for each periodic transaction and at least one | |
524 | * host channel is available for non-periodic transactions. | |
525 | * @non_periodic_channels: Number of host channels assigned to non-periodic | |
526 | * transfers | |
20f2eb9c DC |
527 | * @available_host_channels Number of host channels available for the microframe |
528 | * scheduler to use | |
56f5b1cf PZ |
529 | * @hc_ptr_array: Array of pointers to the host channel descriptors. |
530 | * Allows accessing a host channel descriptor given the | |
531 | * host channel number. This is useful in interrupt | |
532 | * handlers. | |
533 | * @status_buf: Buffer used for data received during the status phase of | |
534 | * a control transfer. | |
535 | * @status_buf_dma: DMA address for status_buf | |
536 | * @start_work: Delayed work for handling host A-cable connection | |
537 | * @reset_work: Delayed work for handling a port reset | |
56f5b1cf PZ |
538 | * @otg_port: OTG port number |
539 | * @frame_list: Frame list | |
540 | * @frame_list_dma: Frame list DMA address | |
941fcce4 DN |
541 | * |
542 | * These are for peripheral mode: | |
543 | * | |
544 | * @driver: USB gadget driver | |
545 | * @phy: The otg phy transceiver structure for phy control. | |
546 | * @uphy: The otg phy transceiver structure for old USB phy control. | |
547 | * @plat: The platform specific configuration data. This can be removed once | |
548 | * all SoCs support usb transceiver. | |
549 | * @supplies: Definition of USB power supplies | |
550 | * @phyif: PHY interface width | |
551 | * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. | |
552 | * @num_of_eps: Number of available EPs (excluding EP0) | |
553 | * @debug_root: Root directrory for debugfs. | |
554 | * @debug_file: Main status file for debugfs. | |
555 | * @debug_fifo: FIFO status file for debugfs. | |
556 | * @ep0_reply: Request used for ep0 reply. | |
557 | * @ep0_buff: Buffer for EP0 reply data, if needed. | |
558 | * @ctrl_buff: Buffer for EP0 control requests. | |
559 | * @ctrl_req: Request for EP0 control packets. | |
560 | * @setup: NAK management for EP0 SETUP | |
561 | * @last_rst: Time of last reset | |
562 | * @eps: The endpoints being supplied to the gadget framework | |
56f5b1cf PZ |
563 | */ |
564 | struct dwc2_hsotg { | |
565 | struct device *dev; | |
566 | void __iomem *regs; | |
9badec2f MK |
567 | /** Params detected from hardware */ |
568 | struct dwc2_hw_params hw_params; | |
569 | /** Params to actually use */ | |
56f5b1cf | 570 | struct dwc2_core_params *core_params; |
56f5b1cf | 571 | enum usb_otg_state op_state; |
c0155b9d | 572 | enum usb_dr_mode dr_mode; |
56f5b1cf | 573 | |
941fcce4 DN |
574 | struct phy *phy; |
575 | struct usb_phy *uphy; | |
576 | struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; | |
577 | ||
578 | spinlock_t lock; | |
7ad8096e | 579 | struct mutex init_mutex; |
941fcce4 DN |
580 | void *priv; |
581 | int irq; | |
582 | struct clk *clk; | |
583 | ||
56f5b1cf PZ |
584 | unsigned int queuing_high_bandwidth:1; |
585 | unsigned int srp_success:1; | |
586 | ||
587 | struct workqueue_struct *wq_otg; | |
588 | struct work_struct wf_otg; | |
589 | struct timer_list wkp_timer; | |
590 | enum dwc2_lx_state lx_state; | |
591 | ||
941fcce4 DN |
592 | struct dentry *debug_root; |
593 | struct dentry *debug_file; | |
594 | struct dentry *debug_fifo; | |
595 | ||
596 | /* DWC OTG HW Release versions */ | |
597 | #define DWC2_CORE_REV_2_71a 0x4f54271a | |
598 | #define DWC2_CORE_REV_2_90a 0x4f54290a | |
599 | #define DWC2_CORE_REV_2_92a 0x4f54292a | |
600 | #define DWC2_CORE_REV_2_94a 0x4f54294a | |
601 | #define DWC2_CORE_REV_3_00a 0x4f54300a | |
602 | ||
603 | #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) | |
56f5b1cf PZ |
604 | union dwc2_hcd_internal_flags { |
605 | u32 d32; | |
606 | struct { | |
607 | unsigned port_connect_status_change:1; | |
608 | unsigned port_connect_status:1; | |
609 | unsigned port_reset_change:1; | |
610 | unsigned port_enable_change:1; | |
611 | unsigned port_suspend_change:1; | |
612 | unsigned port_over_current_change:1; | |
613 | unsigned port_l1_change:1; | |
fd4850cf | 614 | unsigned reserved:25; |
56f5b1cf PZ |
615 | } b; |
616 | } flags; | |
617 | ||
618 | struct list_head non_periodic_sched_inactive; | |
619 | struct list_head non_periodic_sched_active; | |
620 | struct list_head *non_periodic_qh_ptr; | |
621 | struct list_head periodic_sched_inactive; | |
622 | struct list_head periodic_sched_ready; | |
623 | struct list_head periodic_sched_assigned; | |
624 | struct list_head periodic_sched_queued; | |
625 | u16 periodic_usecs; | |
20f2eb9c | 626 | u16 frame_usecs[8]; |
56f5b1cf PZ |
627 | u16 frame_number; |
628 | u16 periodic_qh_count; | |
629 | ||
630 | #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS | |
631 | #define FRAME_NUM_ARRAY_SIZE 1000 | |
632 | u16 last_frame_num; | |
633 | u16 *frame_num_array; | |
634 | u16 *last_frame_num_array; | |
635 | int frame_num_idx; | |
636 | int dumped_frame_num_array; | |
637 | #endif | |
638 | ||
639 | struct list_head free_hc_list; | |
640 | int periodic_channels; | |
641 | int non_periodic_channels; | |
20f2eb9c | 642 | int available_host_channels; |
56f5b1cf PZ |
643 | struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS]; |
644 | u8 *status_buf; | |
645 | dma_addr_t status_buf_dma; | |
646 | #define DWC2_HCD_STATUS_BUF_SIZE 64 | |
647 | ||
648 | struct delayed_work start_work; | |
649 | struct delayed_work reset_work; | |
56f5b1cf PZ |
650 | u8 otg_port; |
651 | u32 *frame_list; | |
652 | dma_addr_t frame_list_dma; | |
653 | ||
56f5b1cf PZ |
654 | #ifdef DEBUG |
655 | u32 frrem_samples; | |
656 | u64 frrem_accum; | |
657 | ||
658 | u32 hfnum_7_samples_a; | |
659 | u64 hfnum_7_frrem_accum_a; | |
660 | u32 hfnum_0_samples_a; | |
661 | u64 hfnum_0_frrem_accum_a; | |
662 | u32 hfnum_other_samples_a; | |
663 | u64 hfnum_other_frrem_accum_a; | |
664 | ||
665 | u32 hfnum_7_samples_b; | |
666 | u64 hfnum_7_frrem_accum_b; | |
667 | u32 hfnum_0_samples_b; | |
668 | u64 hfnum_0_frrem_accum_b; | |
669 | u32 hfnum_other_samples_b; | |
670 | u64 hfnum_other_frrem_accum_b; | |
671 | #endif | |
941fcce4 DN |
672 | #endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */ |
673 | ||
674 | #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) | |
675 | /* Gadget structures */ | |
676 | struct usb_gadget_driver *driver; | |
677 | struct s3c_hsotg_plat *plat; | |
678 | ||
679 | u32 phyif; | |
680 | int fifo_mem; | |
681 | unsigned int dedicated_fifos:1; | |
682 | unsigned char num_of_eps; | |
683 | u32 fifo_map; | |
684 | ||
685 | struct usb_request *ep0_reply; | |
686 | struct usb_request *ctrl_req; | |
687 | u8 ep0_buff[8]; | |
688 | u8 ctrl_buff[8]; | |
689 | ||
690 | struct usb_gadget gadget; | |
dc6e69e6 | 691 | unsigned int enabled:1; |
4ace06e8 | 692 | unsigned int connected:1; |
dc6e69e6 | 693 | unsigned int setup:1; |
941fcce4 DN |
694 | unsigned long last_rst; |
695 | struct s3c_hsotg_ep *eps; | |
696 | #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ | |
56f5b1cf PZ |
697 | }; |
698 | ||
699 | /* Reasons for halting a host channel */ | |
700 | enum dwc2_halt_status { | |
701 | DWC2_HC_XFER_NO_HALT_STATUS, | |
702 | DWC2_HC_XFER_COMPLETE, | |
703 | DWC2_HC_XFER_URB_COMPLETE, | |
704 | DWC2_HC_XFER_ACK, | |
705 | DWC2_HC_XFER_NAK, | |
706 | DWC2_HC_XFER_NYET, | |
707 | DWC2_HC_XFER_STALL, | |
708 | DWC2_HC_XFER_XACT_ERR, | |
709 | DWC2_HC_XFER_FRAME_OVERRUN, | |
710 | DWC2_HC_XFER_BABBLE_ERR, | |
711 | DWC2_HC_XFER_DATA_TOGGLE_ERR, | |
712 | DWC2_HC_XFER_AHB_ERR, | |
713 | DWC2_HC_XFER_PERIODIC_INCOMPLETE, | |
714 | DWC2_HC_XFER_URB_DEQUEUE, | |
715 | }; | |
716 | ||
717 | /* | |
718 | * The following functions support initialization of the core driver component | |
719 | * and the DWC_otg controller | |
720 | */ | |
721 | extern void dwc2_core_host_init(struct dwc2_hsotg *hsotg); | |
722 | ||
723 | /* | |
724 | * Host core Functions. | |
725 | * The following functions support managing the DWC_otg controller in host | |
726 | * mode. | |
727 | */ | |
728 | extern void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan); | |
729 | extern void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, | |
730 | enum dwc2_halt_status halt_status); | |
731 | extern void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, | |
732 | struct dwc2_host_chan *chan); | |
733 | extern void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, | |
734 | struct dwc2_host_chan *chan); | |
735 | extern void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, | |
736 | struct dwc2_host_chan *chan); | |
737 | extern int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, | |
738 | struct dwc2_host_chan *chan); | |
739 | extern void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, | |
740 | struct dwc2_host_chan *chan); | |
741 | extern void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg); | |
742 | extern void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg); | |
743 | ||
744 | extern u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg); | |
057715f2 | 745 | extern bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg); |
56f5b1cf PZ |
746 | |
747 | /* | |
748 | * Common core Functions. | |
749 | * The following functions support managing the DWC_otg controller in either | |
750 | * device or host mode. | |
751 | */ | |
752 | extern void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes); | |
753 | extern void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num); | |
754 | extern void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg); | |
755 | ||
6706c721 | 756 | extern int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq); |
56f5b1cf PZ |
757 | extern void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd); |
758 | extern void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd); | |
759 | ||
760 | /* This function should be called on every hardware interrupt. */ | |
761 | extern irqreturn_t dwc2_handle_common_intr(int irq, void *dev); | |
762 | ||
763 | /* OTG Core Parameters */ | |
764 | ||
765 | /* | |
766 | * Specifies the OTG capabilities. The driver will automatically | |
767 | * detect the value for this parameter if none is specified. | |
768 | * 0 - HNP and SRP capable (default) | |
769 | * 1 - SRP Only capable | |
770 | * 2 - No HNP/SRP capable | |
771 | */ | |
7218dae7 | 772 | extern void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
773 | #define DWC2_CAP_PARAM_HNP_SRP_CAPABLE 0 |
774 | #define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1 | |
775 | #define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 | |
776 | ||
777 | /* | |
778 | * Specifies whether to use slave or DMA mode for accessing the data | |
779 | * FIFOs. The driver will automatically detect the value for this | |
780 | * parameter if none is specified. | |
781 | * 0 - Slave | |
782 | * 1 - DMA (default, if available) | |
783 | */ | |
7218dae7 | 784 | extern void dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
785 | |
786 | /* | |
787 | * When DMA mode is enabled specifies whether to use | |
788 | * address DMA or DMA Descritor mode for accessing the data | |
789 | * FIFOs in device mode. The driver will automatically detect | |
790 | * the value for this parameter if none is specified. | |
791 | * 0 - address DMA | |
792 | * 1 - DMA Descriptor(default, if available) | |
793 | */ | |
7218dae7 | 794 | extern void dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
795 | |
796 | /* | |
797 | * Specifies the maximum speed of operation in host and device mode. | |
798 | * The actual speed depends on the speed of the attached device and | |
799 | * the value of phy_type. The actual speed depends on the speed of the | |
800 | * attached device. | |
801 | * 0 - High Speed (default) | |
802 | * 1 - Full Speed | |
803 | */ | |
7218dae7 | 804 | extern void dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
805 | #define DWC2_SPEED_PARAM_HIGH 0 |
806 | #define DWC2_SPEED_PARAM_FULL 1 | |
807 | ||
808 | /* | |
809 | * Specifies whether low power mode is supported when attached | |
810 | * to a Full Speed or Low Speed device in host mode. | |
811 | * | |
812 | * 0 - Don't support low power mode (default) | |
813 | * 1 - Support low power mode | |
814 | */ | |
7218dae7 PZ |
815 | extern void dwc2_set_param_host_support_fs_ls_low_power( |
816 | struct dwc2_hsotg *hsotg, int val); | |
56f5b1cf PZ |
817 | |
818 | /* | |
819 | * Specifies the PHY clock rate in low power mode when connected to a | |
820 | * Low Speed device in host mode. This parameter is applicable only if | |
821 | * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS | |
822 | * then defaults to 6 MHZ otherwise 48 MHZ. | |
823 | * | |
824 | * 0 - 48 MHz | |
825 | * 1 - 6 MHz | |
826 | */ | |
7218dae7 PZ |
827 | extern void dwc2_set_param_host_ls_low_power_phy_clk(struct dwc2_hsotg *hsotg, |
828 | int val); | |
56f5b1cf PZ |
829 | #define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 |
830 | #define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 | |
831 | ||
832 | /* | |
833 | * 0 - Use cC FIFO size parameters | |
834 | * 1 - Allow dynamic FIFO sizing (default) | |
835 | */ | |
7218dae7 PZ |
836 | extern void dwc2_set_param_enable_dynamic_fifo(struct dwc2_hsotg *hsotg, |
837 | int val); | |
56f5b1cf PZ |
838 | |
839 | /* | |
840 | * Number of 4-byte words in the Rx FIFO in host mode when dynamic | |
841 | * FIFO sizing is enabled. | |
842 | * 16 to 32768 (default 1024) | |
843 | */ | |
7218dae7 | 844 | extern void dwc2_set_param_host_rx_fifo_size(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
845 | |
846 | /* | |
847 | * Number of 4-byte words in the non-periodic Tx FIFO in host mode | |
848 | * when Dynamic FIFO sizing is enabled in the core. | |
849 | * 16 to 32768 (default 256) | |
850 | */ | |
7218dae7 PZ |
851 | extern void dwc2_set_param_host_nperio_tx_fifo_size(struct dwc2_hsotg *hsotg, |
852 | int val); | |
56f5b1cf PZ |
853 | |
854 | /* | |
855 | * Number of 4-byte words in the host periodic Tx FIFO when dynamic | |
856 | * FIFO sizing is enabled. | |
857 | * 16 to 32768 (default 256) | |
858 | */ | |
7218dae7 PZ |
859 | extern void dwc2_set_param_host_perio_tx_fifo_size(struct dwc2_hsotg *hsotg, |
860 | int val); | |
56f5b1cf PZ |
861 | |
862 | /* | |
863 | * The maximum transfer size supported in bytes. | |
864 | * 2047 to 65,535 (default 65,535) | |
865 | */ | |
7218dae7 | 866 | extern void dwc2_set_param_max_transfer_size(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
867 | |
868 | /* | |
869 | * The maximum number of packets in a transfer. | |
870 | * 15 to 511 (default 511) | |
871 | */ | |
7218dae7 | 872 | extern void dwc2_set_param_max_packet_count(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
873 | |
874 | /* | |
875 | * The number of host channel registers to use. | |
876 | * 1 to 16 (default 11) | |
877 | * Note: The FPGA configuration supports a maximum of 11 host channels. | |
878 | */ | |
7218dae7 | 879 | extern void dwc2_set_param_host_channels(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
880 | |
881 | /* | |
882 | * Specifies the type of PHY interface to use. By default, the driver | |
883 | * will automatically detect the phy_type. | |
884 | * | |
885 | * 0 - Full Speed PHY | |
886 | * 1 - UTMI+ (default) | |
887 | * 2 - ULPI | |
888 | */ | |
7218dae7 | 889 | extern void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
890 | #define DWC2_PHY_TYPE_PARAM_FS 0 |
891 | #define DWC2_PHY_TYPE_PARAM_UTMI 1 | |
892 | #define DWC2_PHY_TYPE_PARAM_ULPI 2 | |
893 | ||
894 | /* | |
895 | * Specifies the UTMI+ Data Width. This parameter is | |
896 | * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI | |
897 | * PHY_TYPE, this parameter indicates the data width between | |
898 | * the MAC and the ULPI Wrapper.) Also, this parameter is | |
899 | * applicable only if the OTG_HSPHY_WIDTH cC parameter was set | |
900 | * to "8 and 16 bits", meaning that the core has been | |
901 | * configured to work at either data path width. | |
902 | * | |
903 | * 8 or 16 bits (default 16) | |
904 | */ | |
7218dae7 | 905 | extern void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
906 | |
907 | /* | |
908 | * Specifies whether the ULPI operates at double or single | |
909 | * data rate. This parameter is only applicable if PHY_TYPE is | |
910 | * ULPI. | |
911 | * | |
912 | * 0 - single data rate ULPI interface with 8 bit wide data | |
913 | * bus (default) | |
914 | * 1 - double data rate ULPI interface with 4 bit wide data | |
915 | * bus | |
916 | */ | |
7218dae7 | 917 | extern void dwc2_set_param_phy_ulpi_ddr(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
918 | |
919 | /* | |
920 | * Specifies whether to use the internal or external supply to | |
921 | * drive the vbus with a ULPI phy. | |
922 | */ | |
7218dae7 | 923 | extern void dwc2_set_param_phy_ulpi_ext_vbus(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
924 | #define DWC2_PHY_ULPI_INTERNAL_VBUS 0 |
925 | #define DWC2_PHY_ULPI_EXTERNAL_VBUS 1 | |
926 | ||
927 | /* | |
928 | * Specifies whether to use the I2Cinterface for full speed PHY. This | |
929 | * parameter is only applicable if PHY_TYPE is FS. | |
930 | * 0 - No (default) | |
931 | * 1 - Yes | |
932 | */ | |
7218dae7 | 933 | extern void dwc2_set_param_i2c_enable(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf | 934 | |
7218dae7 | 935 | extern void dwc2_set_param_ulpi_fs_ls(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf | 936 | |
7218dae7 | 937 | extern void dwc2_set_param_ts_dline(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
938 | |
939 | /* | |
940 | * Specifies whether dedicated transmit FIFOs are | |
941 | * enabled for non periodic IN endpoints in device mode | |
942 | * 0 - No | |
943 | * 1 - Yes | |
944 | */ | |
7218dae7 PZ |
945 | extern void dwc2_set_param_en_multiple_tx_fifo(struct dwc2_hsotg *hsotg, |
946 | int val); | |
56f5b1cf | 947 | |
7218dae7 | 948 | extern void dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf | 949 | |
7218dae7 | 950 | extern void dwc2_set_param_ahbcfg(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf | 951 | |
7218dae7 | 952 | extern void dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val); |
56f5b1cf PZ |
953 | |
954 | /* | |
955 | * Dump core registers and SPRAM | |
956 | */ | |
957 | extern void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg); | |
958 | extern void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg); | |
959 | extern void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg); | |
960 | ||
961 | /* | |
962 | * Return OTG version - either 1.3 or 2.0 | |
963 | */ | |
964 | extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg); | |
965 | ||
117777b2 DN |
966 | /* Gadget defines */ |
967 | #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) | |
968 | extern int s3c_hsotg_remove(struct dwc2_hsotg *hsotg); | |
969 | extern int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2); | |
970 | extern int s3c_hsotg_resume(struct dwc2_hsotg *dwc2); | |
971 | extern int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq); | |
510ffaa4 DN |
972 | extern void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2); |
973 | extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg); | |
4ace06e8 | 974 | extern void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2); |
117777b2 DN |
975 | #else |
976 | static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2) | |
977 | { return 0; } | |
978 | static inline int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2) | |
979 | { return 0; } | |
980 | static inline int s3c_hsotg_resume(struct dwc2_hsotg *dwc2) | |
981 | { return 0; } | |
982 | static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) | |
983 | { return 0; } | |
510ffaa4 DN |
984 | static inline void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2) {} |
985 | static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {} | |
4ace06e8 | 986 | static inline void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2) {} |
117777b2 DN |
987 | #endif |
988 | ||
989 | #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) | |
990 | extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg); | |
991 | extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg); | |
992 | extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg); | |
993 | #else | |
994 | static inline void dwc2_set_all_params(struct dwc2_core_params *params, int value) {} | |
995 | static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) | |
996 | { return 0; } | |
997 | static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {} | |
998 | static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {} | |
999 | static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {} | |
1000 | static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, | |
1001 | const struct dwc2_core_params *params) | |
1002 | { return 0; } | |
1003 | #endif | |
1004 | ||
56f5b1cf | 1005 | #endif /* __DWC2_CORE_H__ */ |