[linux-2.6-block.git] / drivers / staging / rtl8712 / usb_intf.c

/******************************************************************************
 * usb_intf.c
 *
 * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
 * Linux device driver for RTL8192SU
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 * Modifications for inclusion into the Linux staging tree are
 * Copyright(c) 2010 Larry Finger. All rights reserved.
 *
 * Contact information:
 * WLAN FAE <wlanfae@realtek.com>
 * Larry Finger <Larry.Finger@lwfinger.net>
 *
 ******************************************************************************/

#define _HCI_INTF_C_

#include <linux/usb.h>
#include <linux/module.h>
#include <linux/firmware.h>

#include "osdep_service.h"
#include "drv_types.h"
#include "recv_osdep.h"
#include "xmit_osdep.h"
#include "rtl8712_efuse.h"
#include "usb_ops.h"
#include "usb_osintf.h"

static struct usb_interface *pintf;

static int r871xu_drv_init(struct usb_interface *pusb_intf,
			   const struct usb_device_id *pdid);

static void r871xu_dev_remove(struct usb_interface *pusb_intf);

static struct usb_device_id rtl871x_usb_id_tbl[] = {

/* RTL8188SU */
	/* Realtek */
	{USB_DEVICE(0x0BDA, 0x8171)},
	{USB_DEVICE(0x0bda, 0x8173)},
	{USB_DEVICE(0x0bda, 0x8712)},
	{USB_DEVICE(0x0bda, 0x8713)},
	{USB_DEVICE(0x0bda, 0xC512)},
	/* Abocom */
	{USB_DEVICE(0x07B8, 0x8188)},
	/* ASUS */
	{USB_DEVICE(0x0B05, 0x1786)},
	{USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */
	/* Belkin */
	{USB_DEVICE(0x050D, 0x945A)},
	/* Corega */
	{USB_DEVICE(0x07AA, 0x0047)},
	/* D-Link */
	{USB_DEVICE(0x2001, 0x3306)},
	{USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */
	/* Edimax */
	{USB_DEVICE(0x7392, 0x7611)},
	/* EnGenius */
	{USB_DEVICE(0x1740, 0x9603)},
	/* Hawking */
	{USB_DEVICE(0x0E66, 0x0016)},
	/* Hercules */
	{USB_DEVICE(0x06F8, 0xE034)},
	{USB_DEVICE(0x06F8, 0xE032)},
	/* Logitec */
	{USB_DEVICE(0x0789, 0x0167)},
	/* PCI */
	{USB_DEVICE(0x2019, 0xAB28)},
	{USB_DEVICE(0x2019, 0xED16)},
	/* Sitecom */
	{USB_DEVICE(0x0DF6, 0x0057)},
	{USB_DEVICE(0x0DF6, 0x0045)},
	{USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */
	{USB_DEVICE(0x0DF6, 0x004B)},
	{USB_DEVICE(0x0DF6, 0x005B)},
	{USB_DEVICE(0x0DF6, 0x005D)},
	{USB_DEVICE(0x0DF6, 0x0063)},
	/* Sweex */
	{USB_DEVICE(0x177F, 0x0154)},
	/* Thinkware */
	{USB_DEVICE(0x0BDA, 0x5077)},
	/* Toshiba */
	{USB_DEVICE(0x1690, 0x0752)},
	/* - */
	{USB_DEVICE(0x20F4, 0x646B)},
	{USB_DEVICE(0x083A, 0xC512)},
	{USB_DEVICE(0x25D4, 0x4CA1)},
	{USB_DEVICE(0x25D4, 0x4CAB)},

/* RTL8191SU */
	/* Realtek */
	{USB_DEVICE(0x0BDA, 0x8172)},
	{USB_DEVICE(0x0BDA, 0x8192)},
	/* Amigo */
	{USB_DEVICE(0x0EB0, 0x9061)},
	/* ASUS/EKB */
	{USB_DEVICE(0x13D3, 0x3323)},
	{USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */
	{USB_DEVICE(0x13D3, 0x3342)},
	/* ASUS/EKBLenovo */
	{USB_DEVICE(0x13D3, 0x3333)},
	{USB_DEVICE(0x13D3, 0x3334)},
	{USB_DEVICE(0x13D3, 0x3335)}, /* 11n mode disable */
	{USB_DEVICE(0x13D3, 0x3336)}, /* 11n mode disable */
	/* ASUS/Media BOX */
	{USB_DEVICE(0x13D3, 0x3309)},
	/* Belkin */
	{USB_DEVICE(0x050D, 0x815F)},
	/* D-Link */
	{USB_DEVICE(0x07D1, 0x3302)},
	{USB_DEVICE(0x07D1, 0x3300)},
	{USB_DEVICE(0x07D1, 0x3303)},
	/* Edimax */
	{USB_DEVICE(0x7392, 0x7612)},
	/* EnGenius */
	{USB_DEVICE(0x1740, 0x9605)},
	/* Guillemot */
	{USB_DEVICE(0x06F8, 0xE031)},
	/* Hawking */
	{USB_DEVICE(0x0E66, 0x0015)},
	/* Mediao */
	{USB_DEVICE(0x13D3, 0x3306)},
	/* PCI */
	{USB_DEVICE(0x2019, 0xED18)},
	{USB_DEVICE(0x2019, 0x4901)},
	/* Sitecom */
	{USB_DEVICE(0x0DF6, 0x0058)},
	{USB_DEVICE(0x0DF6, 0x0049)},
	{USB_DEVICE(0x0DF6, 0x004C)},
	{USB_DEVICE(0x0DF6, 0x0064)},
	/* Skyworth */
	{USB_DEVICE(0x14b2, 0x3300)},
	{USB_DEVICE(0x14b2, 0x3301)},
	{USB_DEVICE(0x14B2, 0x3302)},
	/* - */
	{USB_DEVICE(0x04F2, 0xAFF2)},
	{USB_DEVICE(0x04F2, 0xAFF5)},
	{USB_DEVICE(0x04F2, 0xAFF6)},
	{USB_DEVICE(0x13D3, 0x3339)},
	{USB_DEVICE(0x13D3, 0x3340)}, /* 11n mode disable */
	{USB_DEVICE(0x13D3, 0x3341)}, /* 11n mode disable */
	{USB_DEVICE(0x13D3, 0x3310)},
	{USB_DEVICE(0x13D3, 0x3325)},

/* RTL8192SU */
	/* Realtek */
	{USB_DEVICE(0x0BDA, 0x8174)},
	/* Belkin */
	{USB_DEVICE(0x050D, 0x845A)},
	/* Corega */
	{USB_DEVICE(0x07AA, 0x0051)},
	/* Edimax */
	{USB_DEVICE(0x7392, 0x7622)},
	/* NEC */
	{USB_DEVICE(0x0409, 0x02B6)},
	{}
};

MODULE_DEVICE_TABLE(usb, rtl871x_usb_id_tbl);

static struct specific_device_id specific_device_id_tbl[] = {
	{.idVendor = 0x0b05, .idProduct = 0x1791,
		 .flags = SPEC_DEV_ID_DISABLE_HT},
	{.idVendor = 0x0df6, .idProduct = 0x0059,
		 .flags = SPEC_DEV_ID_DISABLE_HT},
	{.idVendor = 0x13d3, .idProduct = 0x3306,
		 .flags = SPEC_DEV_ID_DISABLE_HT},
	{.idVendor = 0x13D3, .idProduct = 0x3311,
		 .flags = SPEC_DEV_ID_DISABLE_HT},
	{.idVendor = 0x13d3, .idProduct = 0x3335,
		 .flags = SPEC_DEV_ID_DISABLE_HT},
	{.idVendor = 0x13d3, .idProduct = 0x3336,
		 .flags = SPEC_DEV_ID_DISABLE_HT},
	{.idVendor = 0x13d3, .idProduct = 0x3340,
		 .flags = SPEC_DEV_ID_DISABLE_HT},
	{.idVendor = 0x13d3, .idProduct = 0x3341,
		 .flags = SPEC_DEV_ID_DISABLE_HT},
	{}
};

struct drv_priv {
	struct usb_driver r871xu_drv;
	int drv_registered;
};

#ifdef CONFIG_PM
static int r871x_suspend(struct usb_interface *pusb_intf, pm_message_t state)
{
	struct net_device *pnetdev = usb_get_intfdata(pusb_intf);

	printk(KERN_INFO "r8712: suspending...\n");
	if (!pnetdev || !netif_running(pnetdev)) {
		printk(KERN_INFO "r8712: unable to suspend\n");
		return 0;
	}
	if (pnetdev->netdev_ops->ndo_stop)
		pnetdev->netdev_ops->ndo_stop(pnetdev);
	mdelay(10);
	netif_device_detach(pnetdev);
	return 0;
}

static int r871x_resume(struct usb_interface *pusb_intf)
{
	struct net_device *pnetdev = usb_get_intfdata(pusb_intf);

	printk(KERN_INFO "r8712: resuming...\n");
	if (!pnetdev || !netif_running(pnetdev)) {
		printk(KERN_INFO "r8712: unable to resume\n");
		return 0;
	}
	netif_device_attach(pnetdev);
	if (pnetdev->netdev_ops->ndo_open)
		pnetdev->netdev_ops->ndo_open(pnetdev);
	return 0;
}

static int r871x_reset_resume(struct usb_interface *pusb_intf)
{
	/* dummy routine */
	return 0;
}

#endif

static struct drv_priv drvpriv = {
	.r871xu_drv.name = "r8712u",
	.r871xu_drv.id_table = rtl871x_usb_id_tbl,
	.r871xu_drv.probe = r871xu_drv_init,
	.r871xu_drv.disconnect = r871xu_dev_remove,
#ifdef CONFIG_PM
	.r871xu_drv.suspend = r871x_suspend,
	.r871xu_drv.resume = r871x_resume,
	.r871xu_drv.reset_resume = r871x_reset_resume,
#endif
};

static uint r8712_usb_dvobj_init(struct _adapter *padapter)
{
	uint	status = _SUCCESS;
	struct	usb_device_descriptor		*pdev_desc;
	struct	usb_host_config			*phost_conf;
	struct	usb_config_descriptor		*pconf_desc;
	struct	usb_host_interface		*phost_iface;
	struct	usb_interface_descriptor	*piface_desc;
	struct dvobj_priv *pdvobjpriv = &padapter->dvobjpriv;
	struct usb_device *pusbd = pdvobjpriv->pusbdev;

	pdvobjpriv->padapter = padapter;
	padapter->EepromAddressSize = 6;
	pdev_desc = &pusbd->descriptor;
	phost_conf = pusbd->actconfig;
	pconf_desc = &phost_conf->desc;
	phost_iface = &pintf->altsetting[0];
	piface_desc = &phost_iface->desc;
	pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints;
	if (pusbd->speed == USB_SPEED_HIGH) {
		pdvobjpriv->ishighspeed = true;
		printk(KERN_INFO "r8712u: USB_SPEED_HIGH with %d endpoints\n",
		       pdvobjpriv->nr_endpoint);
	} else {
		pdvobjpriv->ishighspeed = false;
		printk(KERN_INFO "r8712u: USB_SPEED_LOW with %d endpoints\n",
		       pdvobjpriv->nr_endpoint);
	}
	if ((r8712_alloc_io_queue(padapter)) == _FAIL)
		status = _FAIL;
	return status;
}

static void r8712_usb_dvobj_deinit(struct _adapter *padapter)
{
}

void rtl871x_intf_stop(struct _adapter *padapter)
{
	/*disable_hw_interrupt*/
	if (padapter->bSurpriseRemoved == false) {
		/*device still exists, so driver can do i/o operation
		 * TODO: */
	}

	/* cancel in irp */
	if (padapter->dvobjpriv.inirp_deinit != NULL)
		padapter->dvobjpriv.inirp_deinit(padapter);
	/* cancel out irp */
	r8712_usb_write_port_cancel(padapter);
	/* TODO:cancel other irps */
}

void r871x_dev_unload(struct _adapter *padapter)
{
	if (padapter->bup == true) {
		/*s1.*/
		padapter->bDriverStopped = true;

		/*s3.*/
		rtl871x_intf_stop(padapter);

		/*s4.*/
		r8712_stop_drv_threads(padapter);

		/*s5.*/
		if (padapter->bSurpriseRemoved == false) {
			padapter->hw_init_completed = false;
			rtl8712_hal_deinit(padapter);
		}

		/*s6.*/
		if (padapter->dvobj_deinit)
			padapter->dvobj_deinit(padapter);
		padapter->bup = false;
	}
}

static void disable_ht_for_spec_devid(const struct usb_device_id *pdid,
				      struct _adapter *padapter)
{
	u16 vid, pid;
	u32 flags;
	int i;
	int num = sizeof(specific_device_id_tbl) /
		  sizeof(struct specific_device_id);

	for (i = 0; i < num; i++) {
		vid = specific_device_id_tbl[i].idVendor;
		pid = specific_device_id_tbl[i].idProduct;
		flags = specific_device_id_tbl[i].flags;

		if ((pdid->idVendor == vid) && (pdid->idProduct == pid) &&
		    (flags&SPEC_DEV_ID_DISABLE_HT)) {
			padapter->registrypriv.ht_enable = 0;
			padapter->registrypriv.cbw40_enable = 0;
			padapter->registrypriv.ampdu_enable = 0;
		}
	}
}

static u8 key_2char2num(u8 hch, u8 lch)
{
	return (hex_to_bin(hch) << 4) | hex_to_bin(lch);
}

/*
 * drv_init() - a device potentially for us
 *
 * notes: drv_init() is called when the bus driver has located a card for us
 * to support. We accept the new device by returning 0.
*/
static int r871xu_drv_init(struct usb_interface *pusb_intf,
			   const struct usb_device_id *pdid)
{
	uint status;
	struct _adapter *padapter = NULL;
	struct dvobj_priv *pdvobjpriv;
	struct net_device *pnetdev;
	struct usb_device *udev;

	printk(KERN_INFO "r8712u: Staging version\n");
	/* In this probe function, O.S. will provide the usb interface pointer
	 * to driver. We have to increase the reference count of the usb device
	 * structure by using the usb_get_dev function.
	 */
	udev = interface_to_usbdev(pusb_intf);
	usb_get_dev(udev);
	pintf = pusb_intf;
	/* step 1. */
	pnetdev = r8712_init_netdev();
	if (!pnetdev)
		goto error;
	padapter = netdev_priv(pnetdev);
	disable_ht_for_spec_devid(pdid, padapter);
	pdvobjpriv = &padapter->dvobjpriv;
	pdvobjpriv->padapter = padapter;
	padapter->dvobjpriv.pusbdev = udev;
	padapter->pusb_intf = pusb_intf;
	usb_set_intfdata(pusb_intf, pnetdev);
	SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
	/* step 2. */
	padapter->dvobj_init = &r8712_usb_dvobj_init;
	padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
	padapter->halpriv.hal_bus_init = &r8712_usb_hal_bus_init;
	padapter->dvobjpriv.inirp_init = &r8712_usb_inirp_init;
	padapter->dvobjpriv.inirp_deinit = &r8712_usb_inirp_deinit;
	/* step 3.
	 * initialize the dvobj_priv
	 */
	if (padapter->dvobj_init == NULL)
			goto error;
	else {
		status = padapter->dvobj_init(padapter);
		if (status != _SUCCESS)
			goto error;
	}
	/* step 4. */
	status = r8712_init_drv_sw(padapter);
	if (status == _FAIL)
		goto error;
	/* step 5. read efuse/eeprom data and get mac_addr */
	{
		int i, offset;
		u8 mac[6];
		u8 tmpU1b, AutoloadFail, eeprom_CustomerID;
		u8 *pdata = padapter->eeprompriv.efuse_eeprom_data;

		tmpU1b = r8712_read8(padapter, EE_9346CR);/*CR9346*/

		/* To check system boot selection.*/
		printk(KERN_INFO "r8712u: Boot from %s: Autoload %s\n",
		       (tmpU1b & _9356SEL) ? "EEPROM" : "EFUSE",
		       (tmpU1b & _EEPROM_EN) ? "OK" : "Failed");

		/* To check autoload success or not.*/
		if (tmpU1b & _EEPROM_EN) {
			AutoloadFail = true;
			/* The following operations prevent Efuse leakage by
			 * turning on 2.5V.
			 */
			tmpU1b = r8712_read8(padapter, EFUSE_TEST+3);
			r8712_write8(padapter, EFUSE_TEST + 3, tmpU1b | 0x80);
			msleep(20);
			r8712_write8(padapter, EFUSE_TEST + 3,
				     (tmpU1b & (~BIT(7))));

			/* Retrieve Chip version.
			 * Recognize IC version by Reg0x4 BIT15.
			 */
			tmpU1b = (u8)((r8712_read32(padapter, PMC_FSM) >> 15) &
						    0x1F);
			if (tmpU1b == 0x3)
				padapter->registrypriv.chip_version =
				     RTL8712_3rdCUT;
			else
				padapter->registrypriv.chip_version =
				     (tmpU1b >> 1) + 1;
			switch (padapter->registrypriv.chip_version) {
			case RTL8712_1stCUT:
			case RTL8712_2ndCUT:
			case RTL8712_3rdCUT:
				break;
			default:
				padapter->registrypriv.chip_version =
				     RTL8712_2ndCUT;
				break;
			}

			for (i = 0, offset = 0; i < 128; i += 8, offset++)
				r8712_efuse_pg_packet_read(padapter, offset,
						     &pdata[i]);

			if (r8712_initmac) {
				/* Users specify the mac address */
				int jj, kk;

				for (jj = 0, kk = 0; jj < ETH_ALEN;
				     jj++, kk += 3)
					mac[jj] =
					   key_2char2num(r8712_initmac[kk],
					   r8712_initmac[kk + 1]);
			} else {
				/* Use the mac address stored in the Efuse
				 * offset = 0x12 for usb in efuse
				 */
				memcpy(mac, &pdata[0x12], ETH_ALEN);
			}
			eeprom_CustomerID = pdata[0x52];
			switch (eeprom_CustomerID) {
			case EEPROM_CID_ALPHA:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_ALPHA;
				break;
			case EEPROM_CID_CAMEO:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_CAMEO;
				break;
			case EEPROM_CID_SITECOM:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_Sitecom;
				break;
			case EEPROM_CID_COREGA:
				padapter->eeprompriv.CustomerID =
						 RT_CID_COREGA;
				break;
			case EEPROM_CID_Senao:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_Senao;
				break;
			case EEPROM_CID_EDIMAX_BELKIN:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_Edimax_Belkin;
				break;
			case EEPROM_CID_SERCOMM_BELKIN:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_Sercomm_Belkin;
				break;
			case EEPROM_CID_WNC_COREGA:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_WNC_COREGA;
				break;
			case EEPROM_CID_WHQL:
				break;
			case EEPROM_CID_NetCore:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_Netcore;
				break;
			case EEPROM_CID_CAMEO1:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_CAMEO1;
				break;
			case EEPROM_CID_CLEVO:
				padapter->eeprompriv.CustomerID =
						 RT_CID_819x_CLEVO;
				break;
			default:
				padapter->eeprompriv.CustomerID =
						 RT_CID_DEFAULT;
				break;
			}
			printk(KERN_INFO "r8712u: CustomerID = 0x%.4x\n",
			     padapter->eeprompriv.CustomerID);
			/* Led mode */
			switch (padapter->eeprompriv.CustomerID) {
			case RT_CID_DEFAULT:
			case RT_CID_819x_ALPHA:
			case RT_CID_819x_CAMEO:
				padapter->ledpriv.LedStrategy = SW_LED_MODE1;
				padapter->ledpriv.bRegUseLed = true;
				break;
			case RT_CID_819x_Sitecom:
				padapter->ledpriv.LedStrategy = SW_LED_MODE2;
				padapter->ledpriv.bRegUseLed = true;
				break;
			case RT_CID_COREGA:
			case RT_CID_819x_Senao:
				padapter->ledpriv.LedStrategy = SW_LED_MODE3;
				padapter->ledpriv.bRegUseLed = true;
				break;
			case RT_CID_819x_Edimax_Belkin:
				padapter->ledpriv.LedStrategy = SW_LED_MODE4;
				padapter->ledpriv.bRegUseLed = true;
				break;
			case RT_CID_819x_Sercomm_Belkin:
				padapter->ledpriv.LedStrategy = SW_LED_MODE5;
				padapter->ledpriv.bRegUseLed = true;
				break;
			case RT_CID_819x_WNC_COREGA:
				padapter->ledpriv.LedStrategy = SW_LED_MODE6;
				padapter->ledpriv.bRegUseLed = true;
				break;
			default:
				padapter->ledpriv.LedStrategy = SW_LED_MODE0;
				padapter->ledpriv.bRegUseLed = false;
				break;
			}
		} else
			AutoloadFail = false;
		if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
		     (mac[2] == 0xff) && (mac[3] == 0xff) &&
		     (mac[4] == 0xff) && (mac[5] == 0xff)) ||
		    ((mac[0] == 0x00) && (mac[1] == 0x00) &&
		     (mac[2] == 0x00) && (mac[3] == 0x00) &&
		     (mac[4] == 0x00) && (mac[5] == 0x00)) ||
		     (AutoloadFail == false)) {
			mac[0] = 0x00;
			mac[1] = 0xe0;
			mac[2] = 0x4c;
			mac[3] = 0x87;
			mac[4] = 0x00;
			mac[5] = 0x00;
		}
		if (r8712_initmac) {
			/* Make sure the user did not select a multicast
			 * address by setting bit 1 of first octet.
			 */
			mac[0] &= 0xFE;
			printk(KERN_INFO "r8712u: MAC Address from user = "
			       "%pM\n", mac);
		} else
			printk(KERN_INFO "r8712u: MAC Address from efuse = "
			       "%pM\n", mac);
		memcpy(pnetdev->dev_addr, mac, ETH_ALEN);
	}
	/* step 6. Load the firmware asynchronously */
	if (rtl871x_load_fw(padapter))
		goto error;
	spin_lock_init(&padapter->lockRxFF0Filter);
	mutex_init(&padapter->mutex_start);
	return 0;
error:
	usb_put_dev(udev);
	usb_set_intfdata(pusb_intf, NULL);
	if (padapter->dvobj_deinit != NULL)
		padapter->dvobj_deinit(padapter);
	if (pnetdev)
		free_netdev(pnetdev);
	return -ENODEV;
}

/* rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove()
 * => how to recognize both */
static void r871xu_dev_remove(struct usb_interface *pusb_intf)
{
	struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
	struct _adapter *padapter = netdev_priv(pnetdev);
	struct usb_device *udev = interface_to_usbdev(pusb_intf);

	usb_set_intfdata(pusb_intf, NULL);
	if (padapter->fw_found)
		release_firmware(padapter->fw);
	/* never exit with a firmware callback pending */
	wait_for_completion(&padapter->rtl8712_fw_ready);
	if (drvpriv.drv_registered == true)
		padapter->bSurpriseRemoved = true;
	if (pnetdev != NULL) {
		/* will call netdev_close() */
		unregister_netdev(pnetdev);
	}
	flush_scheduled_work();
	udelay(1);
	/*Stop driver mlme relation timer */
	if (padapter->fw_found)
		r8712_stop_drv_timers(padapter);
	r871x_dev_unload(padapter);
	r8712_free_drv_sw(padapter);
	usb_set_intfdata(pusb_intf, NULL);
	/* decrease the reference count of the usb device structure
	 * when disconnect */
	usb_put_dev(udev);
	/* If we didn't unplug usb dongle and remove/insert module, driver
	 * fails on sitesurvey for the first time when device is up.
	 * Reset usb port for sitesurvey fail issue. */
	if (udev->state != USB_STATE_NOTATTACHED)
		usb_reset_device(udev);
	return;
}

static int __init r8712u_drv_entry(void)
{
	drvpriv.drv_registered = true;
	return usb_register(&drvpriv.r871xu_drv);
}

static void __exit r8712u_drv_halt(void)
{
	drvpriv.drv_registered = false;
	usb_deregister(&drvpriv.r871xu_drv);
	printk(KERN_INFO "r8712u: Driver unloaded\n");
}

module_init(r8712u_drv_entry);
module_exit(r8712u_drv_halt);
Commit	Line	Data
2865d42c LF	1	/******************************************************************************
	2	* usb_intf.c
	3	*
	4	* Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
	5	* Linux device driver for RTL8192SU
	6	*
	7	* This program is free software; you can redistribute it and/or modify it
	8	* under the terms of version 2 of the GNU General Public License as
	9	* published by the Free Software Foundation.
	10	*
	11	* This program is distributed in the hope that it will be useful, but WITHOUT
	12	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	13	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	14	* more details.
	15	*
	16	* You should have received a copy of the GNU General Public License along with
	17	* this program; if not, write to the Free Software Foundation, Inc.,
	18	* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
	19	*
	20	* Modifications for inclusion into the Linux staging tree are
	21	* Copyright(c) 2010 Larry Finger. All rights reserved.
	22	*
	23	* Contact information:
	24	* WLAN FAE <wlanfae@realtek.com>
	25	* Larry Finger <Larry.Finger@lwfinger.net>
	26	*
	27	******************************************************************************/
	28
	29	#define _HCI_INTF_C_
	30
359140aa	31	#include <linux/usb.h>
81e07c06	32	#include <linux/module.h>
2080913e	33	#include <linux/firmware.h>
359140aa	34
2865d42c LF	35	#include "osdep_service.h"
	36	#include "drv_types.h"
	37	#include "recv_osdep.h"
	38	#include "xmit_osdep.h"
	39	#include "rtl8712_efuse.h"
2865d42c LF	40	#include "usb_ops.h"
	41	#include "usb_osintf.h"
	42
2865d42c LF	43	static struct usb_interface *pintf;
	44
	45	static int r871xu_drv_init(struct usb_interface *pusb_intf,
	46	const struct usb_device_id *pdid);
	47
	48	static void r871xu_dev_remove(struct usb_interface *pusb_intf);
	49
	50	static struct usb_device_id rtl871x_usb_id_tbl[] = {
6b284053 AK	51
	52	/* RTL8188SU */
	53	/* Realtek */
	54	{USB_DEVICE(0x0BDA, 0x8171)},
2865d42c	55	{USB_DEVICE(0x0bda, 0x8173)},
2865d42c LF	56	{USB_DEVICE(0x0bda, 0x8712)},
	57	{USB_DEVICE(0x0bda, 0x8713)},
	58	{USB_DEVICE(0x0bda, 0xC512)},
6b284053	59	/* Abocom */
2865d42c	60	{USB_DEVICE(0x07B8, 0x8188)},
6b284053 AK	61	/* ASUS */
	62	{USB_DEVICE(0x0B05, 0x1786)},
	63	{USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */
	64	/* Belkin */
	65	{USB_DEVICE(0x050D, 0x945A)},
2865d42c	66	/* Corega */
6b284053 AK	67	{USB_DEVICE(0x07AA, 0x0047)},
	68	/* D-Link */
	69	{USB_DEVICE(0x2001, 0x3306)},
	70	{USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */
	71	/* Edimax */
	72	{USB_DEVICE(0x7392, 0x7611)},
2865d42c LF	73	/* EnGenius */
2865d42c LF	74	{USB_DEVICE(0x1740, 0x9603)},
6b284053 AK	75	/* Hawking */
	76	{USB_DEVICE(0x0E66, 0x0016)},
	77	/* Hercules */
	78	{USB_DEVICE(0x06F8, 0xE034)},
	79	{USB_DEVICE(0x06F8, 0xE032)},
	80	/* Logitec */
	81	{USB_DEVICE(0x0789, 0x0167)},
	82	/* PCI */
	83	{USB_DEVICE(0x2019, 0xAB28)},
	84	{USB_DEVICE(0x2019, 0xED16)},
	85	/* Sitecom */
	86	{USB_DEVICE(0x0DF6, 0x0057)},
	87	{USB_DEVICE(0x0DF6, 0x0045)},
	88	{USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */
	89	{USB_DEVICE(0x0DF6, 0x004B)},
1793bf1d	90	{USB_DEVICE(0x0DF6, 0x005B)},
c7caf4d4	91	{USB_DEVICE(0x0DF6, 0x005D)},
6b284053 AK	92	{USB_DEVICE(0x0DF6, 0x0063)},
	93	/* Sweex */
	94	{USB_DEVICE(0x177F, 0x0154)},
	95	/* Thinkware */
	96	{USB_DEVICE(0x0BDA, 0x5077)},
	97	/* Toshiba */
	98	{USB_DEVICE(0x1690, 0x0752)},
	99	/* - */
	100	{USB_DEVICE(0x20F4, 0x646B)},
	101	{USB_DEVICE(0x083A, 0xC512)},
3026b0e9 LS	102	{USB_DEVICE(0x25D4, 0x4CA1)},
3026b0e9 LS	103	{USB_DEVICE(0x25D4, 0x4CAB)},
6b284053 AK	104
	105	/* RTL8191SU */
	106	/* Realtek */
	107	{USB_DEVICE(0x0BDA, 0x8172)},
07b99cf5	108	{USB_DEVICE(0x0BDA, 0x8192)},
6b284053 AK	109	/* Amigo */
	110	{USB_DEVICE(0x0EB0, 0x9061)},
	111	/* ASUS/EKB */
6b284053 AK	112	{USB_DEVICE(0x13D3, 0x3323)},
	113	{USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */
	114	{USB_DEVICE(0x13D3, 0x3342)},
	115	/* ASUS/EKBLenovo */
	116	{USB_DEVICE(0x13D3, 0x3333)},
	117	{USB_DEVICE(0x13D3, 0x3334)},
	118	{USB_DEVICE(0x13D3, 0x3335)}, /* 11n mode disable */
	119	{USB_DEVICE(0x13D3, 0x3336)}, /* 11n mode disable */
	120	/* ASUS/Media BOX */
	121	{USB_DEVICE(0x13D3, 0x3309)},
2865d42c	122	/* Belkin */
6b284053 AK	123	{USB_DEVICE(0x050D, 0x815F)},
	124	/* D-Link */
	125	{USB_DEVICE(0x07D1, 0x3302)},
	126	{USB_DEVICE(0x07D1, 0x3300)},
	127	{USB_DEVICE(0x07D1, 0x3303)},
2865d42c	128	/* Edimax */
2865d42c	129	{USB_DEVICE(0x7392, 0x7612)},
6b284053 AK	130	/* EnGenius */
	131	{USB_DEVICE(0x1740, 0x9605)},
	132	/* Guillemot */
	133	{USB_DEVICE(0x06F8, 0xE031)},
2865d42c LF	134	/* Hawking */
2865d42c LF	135	{USB_DEVICE(0x0E66, 0x0015)},
6b284053	136	/* Mediao */
2865d42c	137	{USB_DEVICE(0x13D3, 0x3306)},
6b284053 AK	138	/* PCI */
	139	{USB_DEVICE(0x2019, 0xED18)},
	140	{USB_DEVICE(0x2019, 0x4901)},
	141	/* Sitecom */
	142	{USB_DEVICE(0x0DF6, 0x0058)},
	143	{USB_DEVICE(0x0DF6, 0x0049)},
	144	{USB_DEVICE(0x0DF6, 0x004C)},
	145	{USB_DEVICE(0x0DF6, 0x0064)},
	146	/* Skyworth */
	147	{USB_DEVICE(0x14b2, 0x3300)},
	148	{USB_DEVICE(0x14b2, 0x3301)},
	149	{USB_DEVICE(0x14B2, 0x3302)},
	150	/* - */
	151	{USB_DEVICE(0x04F2, 0xAFF2)},
	152	{USB_DEVICE(0x04F2, 0xAFF5)},
	153	{USB_DEVICE(0x04F2, 0xAFF6)},
	154	{USB_DEVICE(0x13D3, 0x3339)},
	155	{USB_DEVICE(0x13D3, 0x3340)}, /* 11n mode disable */
	156	{USB_DEVICE(0x13D3, 0x3341)}, /* 11n mode disable */
2865d42c	157	{USB_DEVICE(0x13D3, 0x3310)},
2865d42c	158	{USB_DEVICE(0x13D3, 0x3325)},
6b284053 AK	159
	160	/* RTL8192SU */
	161	/* Realtek */
	162	{USB_DEVICE(0x0BDA, 0x8174)},
6b284053 AK	163	/* Belkin */
	164	{USB_DEVICE(0x050D, 0x845A)},
	165	/* Corega */
	166	{USB_DEVICE(0x07AA, 0x0051)},
	167	/* Edimax */
	168	{USB_DEVICE(0x7392, 0x7622)},
	169	/* NEC */
	170	{USB_DEVICE(0x0409, 0x02B6)},
2865d42c LF	171	{}
	172	};
	173
	174	MODULE_DEVICE_TABLE(usb, rtl871x_usb_id_tbl);
	175
	176	static struct specific_device_id specific_device_id_tbl[] = {
	177	{.idVendor = 0x0b05, .idProduct = 0x1791,
	178	.flags = SPEC_DEV_ID_DISABLE_HT},
6b284053 AK	179	{.idVendor = 0x0df6, .idProduct = 0x0059,
	180	.flags = SPEC_DEV_ID_DISABLE_HT},
	181	{.idVendor = 0x13d3, .idProduct = 0x3306,
	182	.flags = SPEC_DEV_ID_DISABLE_HT},
2865d42c LF	183	{.idVendor = 0x13D3, .idProduct = 0x3311,
2865d42c LF	184	.flags = SPEC_DEV_ID_DISABLE_HT},
6b284053 AK	185	{.idVendor = 0x13d3, .idProduct = 0x3335,
	186	.flags = SPEC_DEV_ID_DISABLE_HT},
	187	{.idVendor = 0x13d3, .idProduct = 0x3336,
	188	.flags = SPEC_DEV_ID_DISABLE_HT},
	189	{.idVendor = 0x13d3, .idProduct = 0x3340,
	190	.flags = SPEC_DEV_ID_DISABLE_HT},
	191	{.idVendor = 0x13d3, .idProduct = 0x3341,
	192	.flags = SPEC_DEV_ID_DISABLE_HT},
2865d42c LF	193	{}
	194	};
	195
	196	struct drv_priv {
	197	struct usb_driver r871xu_drv;
	198	int drv_registered;
	199	};
	200
	201	#ifdef CONFIG_PM
	202	static int r871x_suspend(struct usb_interface *pusb_intf, pm_message_t state)
	203	{
	204	struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
	205
	206	printk(KERN_INFO "r8712: suspending...\n");
	207	if (!pnetdev \|\| !netif_running(pnetdev)) {
	208	printk(KERN_INFO "r8712: unable to suspend\n");
	209	return 0;
	210	}
	211	if (pnetdev->netdev_ops->ndo_stop)
	212	pnetdev->netdev_ops->ndo_stop(pnetdev);
	213	mdelay(10);
	214	netif_device_detach(pnetdev);
	215	return 0;
	216	}
	217
	218	static int r871x_resume(struct usb_interface *pusb_intf)
	219	{
	220	struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
	221
	222	printk(KERN_INFO "r8712: resuming...\n");
	223	if (!pnetdev \|\| !netif_running(pnetdev)) {
	224	printk(KERN_INFO "r8712: unable to resume\n");
	225	return 0;
	226	}
	227	netif_device_attach(pnetdev);
	228	if (pnetdev->netdev_ops->ndo_open)
	229	pnetdev->netdev_ops->ndo_open(pnetdev);
	230	return 0;
	231	}
	232
	233	static int r871x_reset_resume(struct usb_interface *pusb_intf)
	234	{
	235	/* dummy routine */
	236	return 0;
	237	}
	238
	239	#endif
	240
	241	static struct drv_priv drvpriv = {
	242	.r871xu_drv.name = "r8712u",
	243	.r871xu_drv.id_table = rtl871x_usb_id_tbl,
	244	.r871xu_drv.probe = r871xu_drv_init,
	245	.r871xu_drv.disconnect = r871xu_dev_remove,
	246	#ifdef CONFIG_PM
	247	.r871xu_drv.suspend = r871x_suspend,
	248	.r871xu_drv.resume = r871x_resume,
	249	.r871xu_drv.reset_resume = r871x_reset_resume,
	250	#endif
	251	};
	252
	253	static uint r8712_usb_dvobj_init(struct _adapter *padapter)
	254	{
	255	uint status = _SUCCESS;
	256	struct usb_device_descriptor *pdev_desc;
257	struct usb_host_config *phost_conf;
258	struct usb_config_descriptor *pconf_desc;
259	struct usb_host_interface *phost_iface;
260	struct usb_interface_descriptor *piface_desc;
261	struct dvobj_priv *pdvobjpriv = &padapter->dvobjpriv;
262	struct usb_device *pusbd = pdvobjpriv->pusbdev;
263
264	pdvobjpriv->padapter = padapter;
265	padapter->EepromAddressSize = 6;
266	pdev_desc = &pusbd->descriptor;
267	phost_conf = pusbd->actconfig;
268	pconf_desc = &phost_conf->desc;
269	phost_iface = &pintf->altsetting[0];
270	piface_desc = &phost_iface->desc;
271	pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints;
272	if (pusbd->speed == USB_SPEED_HIGH) {
273	pdvobjpriv->ishighspeed = true;
274	printk(KERN_INFO "r8712u: USB_SPEED_HIGH with %d endpoints\n",
275	pdvobjpriv->nr_endpoint);
276	} else {
277	pdvobjpriv->ishighspeed = false;
278	printk(KERN_INFO "r8712u: USB_SPEED_LOW with %d endpoints\n",
279	pdvobjpriv->nr_endpoint);
280	}
281	if ((r8712_alloc_io_queue(padapter)) == _FAIL)
282	status = _FAIL;
2865d42c LF	283	return status;
	284	}
	285
	286	static void r8712_usb_dvobj_deinit(struct _adapter *padapter)
	287	{
	288	}
	289
	290	void rtl871x_intf_stop(struct _adapter *padapter)
	291	{
	292	/disable_hw_interrupt/
	293	if (padapter->bSurpriseRemoved == false) {
	294	/*device still exists, so driver can do i/o operation
	295	* TODO: */
	296	}
	297
	298	/* cancel in irp */
	299	if (padapter->dvobjpriv.inirp_deinit != NULL)
	300	padapter->dvobjpriv.inirp_deinit(padapter);
	301	/* cancel out irp */
	302	r8712_usb_write_port_cancel(padapter);
	303	/* TODO:cancel other irps */
	304	}
	305
	306	void r871x_dev_unload(struct _adapter *padapter)
	307	{
	308	if (padapter->bup == true) {
	309	/s1./
	310	padapter->bDriverStopped = true;
	311
	312	/s3./
	313	rtl871x_intf_stop(padapter);
	314
	315	/s4./
	316	r8712_stop_drv_threads(padapter);
	317
	318	/s5./
	319	if (padapter->bSurpriseRemoved == false) {
	320	padapter->hw_init_completed = false;
	321	rtl8712_hal_deinit(padapter);
	322	}
	323
	324	/s6./
	325	if (padapter->dvobj_deinit)
	326	padapter->dvobj_deinit(padapter);
	327	padapter->bup = false;
	328	}
	329	}
	330
	331	static void disable_ht_for_spec_devid(const struct usb_device_id *pdid,
	332	struct _adapter *padapter)
	333	{
	334	u16 vid, pid;
	335	u32 flags;
	336	int i;
	337	int num = sizeof(specific_device_id_tbl) /
	338	sizeof(struct specific_device_id);
	339
	340	for (i = 0; i < num; i++) {
	341	vid = specific_device_id_tbl[i].idVendor;
	342	pid = specific_device_id_tbl[i].idProduct;
	343	flags = specific_device_id_tbl[i].flags;
	344
	345	if ((pdid->idVendor == vid) && (pdid->idProduct == pid) &&
	346	(flags&SPEC_DEV_ID_DISABLE_HT)) {
347	padapter->registrypriv.ht_enable = 0;
348	padapter->registrypriv.cbw40_enable = 0;
349	padapter->registrypriv.ampdu_enable = 0;
350	}
351	}
352	}
353
354	static u8 key_2char2num(u8 hch, u8 lch)
355	{
356	return (hex_to_bin(hch) << 4) \| hex_to_bin(lch);
357	}
358
359	/*
360	* drv_init() - a device potentially for us
361	*
362	* notes: drv_init() is called when the bus driver has located a card for us
363	* to support. We accept the new device by returning 0.
364	*/
365	static int r871xu_drv_init(struct usb_interface *pusb_intf,
366	const struct usb_device_id *pdid)
367	{
368	uint status;
369	struct _adapter *padapter = NULL;
370	struct dvobj_priv *pdvobjpriv;
371	struct net_device *pnetdev;
ee5b1aad	372	struct usb_device *udev;
2865d42c	373
1c1b8621	374	printk(KERN_INFO "r8712u: Staging version\n");
2865d42c LF	375	/* In this probe function, O.S. will provide the usb interface pointer
	376	* to driver. We have to increase the reference count of the usb device
	377	* structure by using the usb_get_dev function.
	378	*/
ee5b1aad AB	379	udev = interface_to_usbdev(pusb_intf);
ee5b1aad AB	380	usb_get_dev(udev);
2865d42c LF	381	pintf = pusb_intf;
	382	/* step 1. */
	383	pnetdev = r8712_init_netdev();
	384	if (!pnetdev)
	385	goto error;
ee5b1aad	386	padapter = netdev_priv(pnetdev);
2865d42c LF	387	disable_ht_for_spec_devid(pdid, padapter);
	388	pdvobjpriv = &padapter->dvobjpriv;
	389	pdvobjpriv->padapter = padapter;
ee5b1aad	390	padapter->dvobjpriv.pusbdev = udev;
8c213fa5	391	padapter->pusb_intf = pusb_intf;
2865d42c LF	392	usb_set_intfdata(pusb_intf, pnetdev);
	393	SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
	394	/* step 2. */
	395	padapter->dvobj_init = &r8712_usb_dvobj_init;
	396	padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
	397	padapter->halpriv.hal_bus_init = &r8712_usb_hal_bus_init;
	398	padapter->dvobjpriv.inirp_init = &r8712_usb_inirp_init;
	399	padapter->dvobjpriv.inirp_deinit = &r8712_usb_inirp_deinit;
	400	/* step 3.
	401	* initialize the dvobj_priv
	402	*/
	403	if (padapter->dvobj_init == NULL)
	404	goto error;
	405	else {
	406	status = padapter->dvobj_init(padapter);
	407	if (status != _SUCCESS)
	408	goto error;
	409	}
	410	/* step 4. */
	411	status = r8712_init_drv_sw(padapter);
	412	if (status == _FAIL)
	413	goto error;
	414	/* step 5. read efuse/eeprom data and get mac_addr */
	415	{
	416	int i, offset;
	417	u8 mac[6];
	418	u8 tmpU1b, AutoloadFail, eeprom_CustomerID;
	419	u8 *pdata = padapter->eeprompriv.efuse_eeprom_data;
	420
	421	tmpU1b = r8712_read8(padapter, EE_9346CR);/CR9346/
	422
	423	/* To check system boot selection.*/
	424	printk(KERN_INFO "r8712u: Boot from %s: Autoload %s\n",
	425	(tmpU1b & _9356SEL) ? "EEPROM" : "EFUSE",
	426	(tmpU1b & _EEPROM_EN) ? "OK" : "Failed");
	427
	428	/* To check autoload success or not.*/
	429	if (tmpU1b & _EEPROM_EN) {
	430	AutoloadFail = true;
	431	/* The following operations prevent Efuse leakage by
	432	* turning on 2.5V.
	433	*/
	434	tmpU1b = r8712_read8(padapter, EFUSE_TEST+3);
	435	r8712_write8(padapter, EFUSE_TEST + 3, tmpU1b \| 0x80);
	436	msleep(20);
	437	r8712_write8(padapter, EFUSE_TEST + 3,
	438	(tmpU1b & (~BIT(7))));
	439
	440	/* Retrieve Chip version.
	441	* Recognize IC version by Reg0x4 BIT15.
	442	*/
	443	tmpU1b = (u8)((r8712_read32(padapter, PMC_FSM) >> 15) &
	444	0x1F);
	445	if (tmpU1b == 0x3)
	446	padapter->registrypriv.chip_version =
	447	RTL8712_3rdCUT;
	448	else
	449	padapter->registrypriv.chip_version =
	450	(tmpU1b >> 1) + 1;
	451	switch (padapter->registrypriv.chip_version) {
	452	case RTL8712_1stCUT:
	453	case RTL8712_2ndCUT:
	454	case RTL8712_3rdCUT:
	455	break;
456	default:
457	padapter->registrypriv.chip_version =
458	RTL8712_2ndCUT;
459	break;
460	}
461
462	for (i = 0, offset = 0; i < 128; i += 8, offset++)
463	r8712_efuse_pg_packet_read(padapter, offset,
464	&pdata[i]);
465
466	if (r8712_initmac) {
467	/* Users specify the mac address */
468	int jj, kk;
469
470	for (jj = 0, kk = 0; jj < ETH_ALEN;
471	jj++, kk += 3)
472	mac[jj] =
473	key_2char2num(r8712_initmac[kk],
474	r8712_initmac[kk + 1]);
475	} else {
476	/* Use the mac address stored in the Efuse
477	* offset = 0x12 for usb in efuse
478	*/
479	memcpy(mac, &pdata[0x12], ETH_ALEN);
480	}
481	eeprom_CustomerID = pdata[0x52];
482	switch (eeprom_CustomerID) {
483	case EEPROM_CID_ALPHA:
484	padapter->eeprompriv.CustomerID =
485	RT_CID_819x_ALPHA;
486	break;
487	case EEPROM_CID_CAMEO:
488	padapter->eeprompriv.CustomerID =
489	RT_CID_819x_CAMEO;
490	break;
491	case EEPROM_CID_SITECOM:
492	padapter->eeprompriv.CustomerID =
493	RT_CID_819x_Sitecom;
494	break;
495	case EEPROM_CID_COREGA:
496	padapter->eeprompriv.CustomerID =
497	RT_CID_COREGA;
498	break;
499	case EEPROM_CID_Senao:
500	padapter->eeprompriv.CustomerID =
501	RT_CID_819x_Senao;
502	break;
503	case EEPROM_CID_EDIMAX_BELKIN:
504	padapter->eeprompriv.CustomerID =
505	RT_CID_819x_Edimax_Belkin;
506	break;
507	case EEPROM_CID_SERCOMM_BELKIN:
508	padapter->eeprompriv.CustomerID =
509	RT_CID_819x_Sercomm_Belkin;
510	break;
511	case EEPROM_CID_WNC_COREGA:
512	padapter->eeprompriv.CustomerID =
513	RT_CID_819x_WNC_COREGA;
514	break;
515	case EEPROM_CID_WHQL:
516	break;
517	case EEPROM_CID_NetCore:
518	padapter->eeprompriv.CustomerID =
519	RT_CID_819x_Netcore;
520	break;
521	case EEPROM_CID_CAMEO1:
522	padapter->eeprompriv.CustomerID =
523	RT_CID_819x_CAMEO1;
524	break;
525	case EEPROM_CID_CLEVO:
526	padapter->eeprompriv.CustomerID =
527	RT_CID_819x_CLEVO;
528	break;
529	default:
530	padapter->eeprompriv.CustomerID =
531	RT_CID_DEFAULT;
532	break;
533	}
534	printk(KERN_INFO "r8712u: CustomerID = 0x%.4x\n",
535	padapter->eeprompriv.CustomerID);
536	/* Led mode */
537	switch (padapter->eeprompriv.CustomerID) {
538	case RT_CID_DEFAULT:
539	case RT_CID_819x_ALPHA:
540	case RT_CID_819x_CAMEO:
541	padapter->ledpriv.LedStrategy = SW_LED_MODE1;
542	padapter->ledpriv.bRegUseLed = true;
543	break;
544	case RT_CID_819x_Sitecom:
545	padapter->ledpriv.LedStrategy = SW_LED_MODE2;
546	padapter->ledpriv.bRegUseLed = true;
547	break;
548	case RT_CID_COREGA:
549	case RT_CID_819x_Senao:
550	padapter->ledpriv.LedStrategy = SW_LED_MODE3;
551	padapter->ledpriv.bRegUseLed = true;
552	break;
553	case RT_CID_819x_Edimax_Belkin:
554	padapter->ledpriv.LedStrategy = SW_LED_MODE4;
555	padapter->ledpriv.bRegUseLed = true;
556	break;
557	case RT_CID_819x_Sercomm_Belkin:
558	padapter->ledpriv.LedStrategy = SW_LED_MODE5;
559	padapter->ledpriv.bRegUseLed = true;
560	break;
561	case RT_CID_819x_WNC_COREGA:
562	padapter->ledpriv.LedStrategy = SW_LED_MODE6;
563	padapter->ledpriv.bRegUseLed = true;
564	break;
565	default:
566	padapter->ledpriv.LedStrategy = SW_LED_MODE0;
567	padapter->ledpriv.bRegUseLed = false;
568	break;
569	}
570	} else
571	AutoloadFail = false;
572	if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
573	(mac[2] == 0xff) && (mac[3] == 0xff) &&
574	(mac[4] == 0xff) && (mac[5] == 0xff)) \|\|
575	((mac[0] == 0x00) && (mac[1] == 0x00) &&
576	(mac[2] == 0x00) && (mac[3] == 0x00) &&
577	(mac[4] == 0x00) && (mac[5] == 0x00)) \|\|
578	(AutoloadFail == false)) {
579	mac[0] = 0x00;
580	mac[1] = 0xe0;
581	mac[2] = 0x4c;
582	mac[3] = 0x87;
583	mac[4] = 0x00;
584	mac[5] = 0x00;
585	}
586	if (r8712_initmac) {
587	/* Make sure the user did not select a multicast
588	* address by setting bit 1 of first octet.
589	*/
590	mac[0] &= 0xFE;
591	printk(KERN_INFO "r8712u: MAC Address from user = "
592	"%pM\n", mac);
593	} else
594	printk(KERN_INFO "r8712u: MAC Address from efuse = "
595	"%pM\n", mac);
596	memcpy(pnetdev->dev_addr, mac, ETH_ALEN);
597	}
8c213fa5 LF	598	/* step 6. Load the firmware asynchronously */
8c213fa5 LF	599	if (rtl871x_load_fw(padapter))
2865d42c	600	goto error;
ee5b1aad	601	spin_lock_init(&padapter->lockRxFF0Filter);
8c213fa5	602	mutex_init(&padapter->mutex_start);
2865d42c LF	603	return 0;
2865d42c LF	604	error:
ee5b1aad	605	usb_put_dev(udev);
2865d42c LF	606	usb_set_intfdata(pusb_intf, NULL);
	607	if (padapter->dvobj_deinit != NULL)
	608	padapter->dvobj_deinit(padapter);
	609	if (pnetdev)
7bcd9ce6	610	free_netdev(pnetdev);
2865d42c LF	611	return -ENODEV;
	612	}
	613
	614	/* rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove()
	615	* => how to recognize both */
	616	static void r871xu_dev_remove(struct usb_interface *pusb_intf)
	617	{
	618	struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
e33196e1	619	struct _adapter *padapter = netdev_priv(pnetdev);
2865d42c LF	620	struct usb_device *udev = interface_to_usbdev(pusb_intf);
2865d42c LF	621
ee5b1aad	622	usb_set_intfdata(pusb_intf, NULL);
1d73fad8 LF	623	if (padapter->fw_found)
	624	release_firmware(padapter->fw);
	625	/* never exit with a firmware callback pending */
	626	wait_for_completion(&padapter->rtl8712_fw_ready);
	627	if (drvpriv.drv_registered == true)
	628	padapter->bSurpriseRemoved = true;
	629	if (pnetdev != NULL) {
	630	/* will call netdev_close() */
	631	unregister_netdev(pnetdev);
2865d42c	632	}
1d73fad8 LF	633	flush_scheduled_work();
	634	udelay(1);
	635	/Stop driver mlme relation timer /
	636	if (padapter->fw_found)
	637	r8712_stop_drv_timers(padapter);
	638	r871x_dev_unload(padapter);
	639	r8712_free_drv_sw(padapter);
2865d42c LF	640	usb_set_intfdata(pusb_intf, NULL);
	641	/* decrease the reference count of the usb device structure
	642	* when disconnect */
	643	usb_put_dev(udev);
be10ac2b	644	/* If we didn't unplug usb dongle and remove/insert module, driver
2865d42c LF	645	* fails on sitesurvey for the first time when device is up.
	646	* Reset usb port for sitesurvey fail issue. */
	647	if (udev->state != USB_STATE_NOTATTACHED)
	648	usb_reset_device(udev);
	649	return;
	650	}
	651
	652	static int __init r8712u_drv_entry(void)
	653	{
	654	drvpriv.drv_registered = true;
	655	return usb_register(&drvpriv.r871xu_drv);
	656	}
	657
	658	static void __exit r8712u_drv_halt(void)
	659	{
	660	drvpriv.drv_registered = false;
	661	usb_deregister(&drvpriv.r871xu_drv);
	662	printk(KERN_INFO "r8712u: Driver unloaded\n");
	663	}
	664
	665	module_init(r8712u_drv_entry);
	666	module_exit(r8712u_drv_halt);