projects / linux-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Fix common misspellings
[linux-block.git] / drivers / staging / rtl8192e / ieee80211 / rtl819x_HTProc.c
CommitLineData
ecdfa446
GKH		 1
2//As this function is mainly ported from Windows driver, so leave the name little changed. If any confusion caused, tell me. Created by WB. 2008.05.08
3#include "ieee80211.h"
4#include "rtl819x_HT.h"
5u8 MCS_FILTER_ALL[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
6
7u8 MCS_FILTER_1SS[16] = {0xff, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
8
9u16 MCS_DATA_RATE[2][2][77] =
10 { { {13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78 ,104, 156, 208, 234, 260,
11 39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520,
12 0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195,
13 195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260,
14 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, // Long GI, 20MHz
15 {14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289,
16 43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578,
17 0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217,
18 217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289,
19 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, // Short GI, 20MHz
20 { {27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540,
21 81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
22 12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
23 405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
24 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz
25 {30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
26 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
27 13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
28 450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600,
29 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } // Short GI, 40MHz
30 };
31
7602032a
MM		 32static const u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
33static const u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
34static const u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};
65a43784 35//static u8 NETGEAR834Bv2_BROADCOM[3] = {0x00, 0x1b, 0x2f};
7602032a
MM		 36static const u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f};
37static const u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};
38static const u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};
39static const u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
40static const u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
41static const u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};
42static const u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
43static const u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};
ecdfa446 44
39cfb97b 45// 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
ecdfa446
GKH		 46// code in other place??
47//static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
48/********************************************************************************************************************
49 *function: This function update default settings in pHTInfo structure
50 * input: PRT_HIGH_THROUGHPUT pHTInfo
51 * output: none
52 * return: none
53 * notice: These value need be modified if any changes.
54 * *****************************************************************************************************************/
55void HTUpdateDefaultSetting(struct ieee80211_device* ieee)
56{
57 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
ecdfa446 58
ecdfa446
GKH		 59 // ShortGI support
60 pHTInfo->bRegShortGI20MHz= 1;
61 pHTInfo->bRegShortGI40MHz= 1;
62
63 // 40MHz channel support
64 pHTInfo->bRegBW40MHz = 1;
65
66 // CCK rate support in 40MHz channel
67 if(pHTInfo->bRegBW40MHz)
68 pHTInfo->bRegSuppCCK = 1;
69 else
70 pHTInfo->bRegSuppCCK = true;
71
72 // AMSDU related
73 pHTInfo->nAMSDU_MaxSize = 7935UL;
74 pHTInfo->bAMSDU_Support = 0;
75
76 // AMPDU related
77 pHTInfo->bAMPDUEnable = 1;
78 pHTInfo->AMPDU_Factor = 2; //// 0: 2n13(8K), 1:2n14(16K), 2:2n15(32K), 3:2n16(64k)
79 pHTInfo->MPDU_Density = 0;// 0: No restriction, 1: 1/8usec, 2: 1/4usec, 3: 1/2usec, 4: 1usec, 5: 2usec, 6: 4usec, 7:8usec
80
81 // MIMO Power Save
82 pHTInfo->SelfMimoPs = 3;// 0: Static Mimo Ps, 1: Dynamic Mimo Ps, 3: No Limitation, 2: Reserved(Set to 3 automatically.)
83 if(pHTInfo->SelfMimoPs == 2)
84 pHTInfo->SelfMimoPs = 3;
85 // 8190 only. Assign rate operation mode to firmware
86 ieee->bTxDisableRateFallBack = 0;
87 ieee->bTxUseDriverAssingedRate = 0;
88
89#ifdef TO_DO_LIST
90 // 8190 only. Assign duration operation mode to firmware
91 pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
92#endif
93 // 8190 only, Realtek proprietary aggregation mode
94 // Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
95 pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
96
97 // For Rx Reorder Control
98 pHTInfo->bRegRxReorderEnable = 1;
99 pHTInfo->RxReorderWinSize = 64;
100 pHTInfo->RxReorderPendingTime = 30;
101
102#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
103 pHTInfo->UsbTxAggrNum = 4;
104#endif
105#ifdef USB_RX_AGGREGATION_SUPPORT
106 pHTInfo->UsbRxFwAggrEn = 1;
107 pHTInfo->UsbRxFwAggrPageNum = 24;
108 pHTInfo->UsbRxFwAggrPacketNum = 8;
109 pHTInfo->UsbRxFwAggrTimeout = 16; ////usb rx FW aggregation timeout threshold.It's in units of 64us
110#endif
111
112
113}
114/********************************************************************************************************************
115 *function: This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
116 * input: u8* CapIE //Capability IE to be printed out
117 * u8* TitleString //mainly print out caller function
118 * output: none
119 * return: none
120 * notice: Driver should not print out this message by default.
121 * *****************************************************************************************************************/
122void HTDebugHTCapability(u8* CapIE, u8* TitleString )
123{
124
125 static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
126 PHT_CAPABILITY_ELE pCapELE;
127
128 if(!memcmp(CapIE, EWC11NHTCap, sizeof(EWC11NHTCap)))
129 {
130 //EWC IE
131 IEEE80211_DEBUG(IEEE80211_DL_HT, "EWC IE in %s()\n", __FUNCTION__);
132 pCapELE = (PHT_CAPABILITY_ELE)(&CapIE[4]);
133 }else
134 pCapELE = (PHT_CAPABILITY_ELE)(&CapIE[0]);
135
136 IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString );
137
138 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz": "20/40MHz");
139 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz)?"YES": "NO");
140 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz)?"YES": "NO");
141 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC)?"YES": "NO");
142 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize)?"3839": "7935");
143 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk)?"YES": "NO");
144 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMPDU Factor = %d\n", pCapELE->MaxRxAMPDUFactor);
145 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMPDU Density = %d\n", pCapELE->MPDUDensity);
146 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
147 pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
ecdfa446
GKH		 148}
149/********************************************************************************************************************
150 *function: This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
151 * input: u8* InfoIE //Capability IE to be printed out
152 * u8* TitleString //mainly print out caller function
153 * output: none
154 * return: none
155 * notice: Driver should not print out this message by default.
156 * *****************************************************************************************************************/
157void HTDebugHTInfo(u8* InfoIE, u8* TitleString)
158{
159
160 static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
161 PHT_INFORMATION_ELE pHTInfoEle;
162
163 if(!memcmp(InfoIE, EWC11NHTInfo, sizeof(EWC11NHTInfo)))
164 {
165 // Not EWC IE
166 IEEE80211_DEBUG(IEEE80211_DL_HT, "EWC IE in %s()\n", __FUNCTION__);
167 pHTInfoEle = (PHT_INFORMATION_ELE)(&InfoIE[4]);
168 }else
169 pHTInfoEle = (PHT_INFORMATION_ELE)(&InfoIE[0]);
170
171
172 IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Information Element>. Called by %s\n", TitleString);
173
174 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tPrimary channel = %d\n", pHTInfoEle->ControlChl);
175 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSenondary channel =");
176 switch(pHTInfoEle->ExtChlOffset)
177 {
178 case 0:
179 IEEE80211_DEBUG(IEEE80211_DL_HT, "Not Present\n");
180 break;
181 case 1:
182 IEEE80211_DEBUG(IEEE80211_DL_HT, "Upper channel\n");
183 break;
184 case 2:
185 IEEE80211_DEBUG(IEEE80211_DL_HT, "Reserved. Eooro!!!\n");
186 break;
187 case 3:
188 IEEE80211_DEBUG(IEEE80211_DL_HT, "Lower Channel\n");
189 break;
190 }
191 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
192
193 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
194 switch(pHTInfoEle->OptMode)
195 {
196 case 0:
197 IEEE80211_DEBUG(IEEE80211_DL_HT, "No Protection\n");
198 break;
199 case 1:
200 IEEE80211_DEBUG(IEEE80211_DL_HT, "HT non-member protection mode\n");
201 break;
202 case 2:
203 IEEE80211_DEBUG(IEEE80211_DL_HT, "Suggest to open protection\n");
204 break;
205 case 3:
206 IEEE80211_DEBUG(IEEE80211_DL_HT, "HT mixed mode\n");
207 break;
208 }
209
210 IEEE80211_DEBUG(IEEE80211_DL_HT, "\tBasic MCS Rate Set = [%x][%x][%x][%x][%x]\n", pHTInfoEle->BasicMSC[0],\
211 pHTInfoEle->BasicMSC[1], pHTInfoEle->BasicMSC[2], pHTInfoEle->BasicMSC[3], pHTInfoEle->BasicMSC[4]);
ecdfa446
GKH		 212}
213
214/*
215* Return: true if station in half n mode and AP supports 40 bw
216*/
217bool IsHTHalfNmode40Bandwidth(struct ieee80211_device* ieee)
218{
219 bool retValue = false;
220 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
221
222 if(pHTInfo->bCurrentHTSupport == false ) // wireless is n mode
223 retValue = false;
224 else if(pHTInfo->bRegBW40MHz == false) // station supports 40 bw
225 retValue = false;
1e04ca7a 226 else if (!ieee->GetHalfNmodeSupportByAPsHandler(ieee)) // station in half n mode
ecdfa446
GKH		 227 retValue = false;
228 else if(((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ChlWidth) // ap support 40 bw
229 retValue = true;
230 else
231 retValue = false;
232
233 return retValue;
234}
235
236bool IsHTHalfNmodeSGI(struct ieee80211_device* ieee, bool is40MHz)
237{
238 bool retValue = false;
239 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
240
241 if(pHTInfo->bCurrentHTSupport == false ) // wireless is n mode
242 retValue = false;
1e04ca7a 243 else if (!ieee->GetHalfNmodeSupportByAPsHandler(ieee)) // station in half n mode
ecdfa446
GKH		 244 retValue = false;
245 else if(is40MHz) // ap support 40 bw
246 {
247 if(((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ShortGI40Mhz) // ap support 40 bw short GI
248 retValue = true;
249 else
250 retValue = false;
251 }
252 else
253 {
254 if(((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ShortGI20Mhz) // ap support 40 bw short GI
255 retValue = true;
256 else
257 retValue = false;
258 }
259
260 return retValue;
261}
262
263u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee, u8 nMcsRate)
264{
265
266 u8 is40MHz;
267 u8 isShortGI;
268
269 is40MHz = (IsHTHalfNmode40Bandwidth(ieee))?1:0;
270 isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz))? 1:0;
271
272 return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
273}
274
275
276u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate)
277{
278 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
279
280 u8 is40MHz = (pHTInfo->bCurBW40MHz)?1:0;
281 u8 isShortGI = (pHTInfo->bCurBW40MHz)?
282 ((pHTInfo->bCurShortGI40MHz)?1:0):
283 ((pHTInfo->bCurShortGI20MHz)?1:0);
284 return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
285}
286
287/********************************************************************************************************************
288 *function: This function returns current datarate.
289 * input: struct ieee80211_device* ieee
290 * u8 nDataRate
291 * output: none
292 * return: tx rate
293 * notice: quite unsure about how to use this function //wb
294 * *****************************************************************************************************************/
295u16 TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate)
296{
297 //PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
298 u16 CCKOFDMRate[12] = {0x02 , 0x04 , 0x0b , 0x16 , 0x0c , 0x12 , 0x18 , 0x24 , 0x30 , 0x48 , 0x60 , 0x6c};
299 u8 is40MHz = 0;
300 u8 isShortGI = 0;
301
302 if(nDataRate < 12)
303 {
304 return CCKOFDMRate[nDataRate];
305 }
306 else
307 {
308 if (nDataRate >= 0x10 && nDataRate <= 0x1f)//if(nDataRate > 11 && nDataRate < 28 )
309 {
310 is40MHz = 0;
311 isShortGI = 0;
312
313 // nDataRate = nDataRate - 12;
314 }
315 else if(nDataRate >=0x20 && nDataRate <= 0x2f ) //(27, 44)
316 {
317 is40MHz = 1;
318 isShortGI = 0;
319
320 //nDataRate = nDataRate - 28;
321 }
322 else if(nDataRate >= 0x30 && nDataRate <= 0x3f ) //(43, 60)
323 {
324 is40MHz = 0;
325 isShortGI = 1;
326
327 //nDataRate = nDataRate - 44;
328 }
329 else if(nDataRate >= 0x40 && nDataRate <= 0x4f ) //(59, 76)
330 {
331 is40MHz = 1;
332 isShortGI = 1;
333
334 //nDataRate = nDataRate - 60;
335 }
336 return MCS_DATA_RATE[is40MHz][isShortGI][nDataRate&0xf];
337 }
338}
339
340
341
342bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee)
343{
344 bool retValue = false;
345 struct ieee80211_network* net = &ieee->current_network;
346#if 0
65a43784 347 if(ieee->bHalfNMode == false)
ecdfa446
GKH		 348 retValue = false;
349 else
350#endif
351 if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
65a43784 352 (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
ecdfa446
GKH		 353 (memcmp(net->bssid, PCI_RALINK, 3)==0) ||
354 (memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
355 (memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
356 (net->ralink_cap_exist))
357 retValue = true;
358 else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
359 (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
360 (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
65a43784 361 //(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ||
ecdfa446
GKH		 362 (net->broadcom_cap_exist))
363 retValue = true;
364 else if(net->bssht.bdRT2RTAggregation)
365 retValue = true;
366 else
367 retValue = false;
368
369 return retValue;
370}
371
372/********************************************************************************************************************
373 *function: This function returns peer IOT.
374 * input: struct ieee80211_device* ieee
375 * output: none
376 * return:
377 * notice:
378 * *****************************************************************************************************************/
379void HTIOTPeerDetermine(struct ieee80211_device* ieee)
380{
381 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
382 struct ieee80211_network* net = &ieee->current_network;
383 if(net->bssht.bdRT2RTAggregation)
384 pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK;
65a43784 385 else if(net->broadcom_cap_exist){
ecdfa446 386 pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
65a43784 387 }
ecdfa446
GKH		 388 else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
389 (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
65a43784 390 (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)){//||
391 //(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ){
ecdfa446 392 pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
65a43784 393 }
ecdfa446
GKH		 394 else if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
395 (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
396 (memcmp(net->bssid, PCI_RALINK, 3)==0) ||
397 (memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
398 (memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
399 net->ralink_cap_exist)
400 pHTInfo->IOTPeer = HT_IOT_PEER_RALINK;
401 else if((net->atheros_cap_exist )|| (memcmp(net->bssid, DLINK_ATHEROS, 3) == 0))
402 pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
403 else if(memcmp(net->bssid, CISCO_BROADCOM, 3)==0)
404 pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
65a43784 405 else if ((memcmp(net->bssid, LINKSYS_MARVELL_4400N, 3) == 0) ||
406 net->marvell_cap_exist){
407 pHTInfo->IOTPeer = HT_IOT_PEER_MARVELL;
408 }
ecdfa446
GKH		 409 else
410 pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
411
412 IEEE80211_DEBUG(IEEE80211_DL_IOT, "Joseph debug!! IOTPEER: %x\n", pHTInfo->IOTPeer);
413}
414/********************************************************************************************************************
415 *function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good
416 * at receiving MCS14~15 frame from some AP.
417 * input: struct ieee80211_device* ieee
418 * u8 * PeerMacAddr
419 * output: none
420 * return: return 1 if driver should declare MCS13 only(otherwise return 0)
421 * *****************************************************************************************************************/
422u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr)
423{
424 u8 ret = 0;
425#if 0
426 // Apply for 819u only
427#if (HAL_CODE_BASE==RTL8192 && DEV_BUS_TYPE==USB_INTERFACE)
428 if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
429 (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)
430 )
431 {
432 ret = 1;
433 }
434
435
436 if(pHTInfo->bCurrentRT2RTAggregation)
437 {
438 // The parameter of pHTInfo->bCurrentRT2RTAggregation must be decided previously
439 ret = 1;
440 }
441#endif
442#endif
443 return ret;
444 }
445
65a43784 446u8 HTIOTActIsForcedCTS2Self(struct ieee80211_device *ieee, struct ieee80211_network *network)
447{
448 u8 retValue = 0;
449 //if(network->marvell_cap_exist)
450 if(ieee->pHTInfo->IOTPeer == HT_IOT_PEER_MARVELL)
451 {
452 retValue = 1;
453 }
454
455 return retValue;
456}
457
ecdfa446
GKH		 458
459/**
460* Function: HTIOTActIsDisableMCS15
461*
25985edc 462* Overview: Check whether driver should declare capability of receiving MCS15
ecdfa446
GKH		 463*
464* Input:
465* PADAPTER Adapter,
466*
467* Output: None
468* Return: true if driver should disable MCS15
469* 2008.04.15 Emily
470*/
471bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
472{
473 bool retValue = false;
474
475#ifdef TODO
476 // Apply for 819u only
477#if (HAL_CODE_BASE==RTL8192)
478
479#if (DEV_BUS_TYPE == USB_INTERFACE)
480 // Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15
481 retValue = true;
482#elif (DEV_BUS_TYPE == PCI_INTERFACE)
483 // Enable MCS15 if the peer is Cisco AP. by Emily, 2008.05.12
484// if(pBssDesc->bCiscoCapExist)
485// retValue = false;
486// else
487 retValue = false;
488#endif
489#endif
490#endif
491 // Jerry Chang suggest that 8190 1x2 does not need to disable MCS15
492
493 return retValue;
494}
495
496/**
497* Function: HTIOTActIsDisableMCSTwoSpatialStream
498*
25985edc 499* Overview: Check whether driver should declare capability of receiving All 2 ss packets
ecdfa446
GKH		 500*
501* Input:
502* PADAPTER Adapter,
503*
504* Output: None
505* Return: true if driver should disable all two spatial stream packet
506* 2008.04.21 Emily
507*/
508bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device* ieee, u8 *PeerMacAddr)
509{
510 bool retValue = false;
511
512#ifdef TODO
513 // Apply for 819u only
514//#if (HAL_CODE_BASE==RTL8192)
515
516 //This rule only apply to Belkin(Ralink) AP
517 if(IS_UNDER_11N_AES_MODE(Adapter))
518 {
519 if((PlatformCompareMemory(PeerMacAddr, BELKINF5D8233V1_RALINK, 3)==0) ||
520 (PlatformCompareMemory(PeerMacAddr, PCI_RALINK, 3)==0) ||
521 (PlatformCompareMemory(PeerMacAddr, EDIMAX_RALINK, 3)==0))
522 {
523 //Set True to disable this function. Disable by default, Emily, 2008.04.23
524 retValue = false;
525 }
526 }
527
528//#endif
529#endif
530 return retValue;
531}
532
533/********************************************************************************************************************
534 *function: Check whether driver should disable EDCA turbo mode
535 * input: struct ieee80211_device* ieee
536 * u8* PeerMacAddr
537 * output: none
538 * return: return 1 if driver should disable EDCA turbo mode(otherwise return 0)
539 * *****************************************************************************************************************/
540u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device* ieee, u8* PeerMacAddr)
541{
542 u8 retValue = false; // default enable EDCA Turbo mode.
543 // Set specific EDCA parameter for different AP in DM handler.
544
545 return retValue;
546#if 0
547 if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0)||
548 (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
549 (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
550 (memcmp(PeerMacAddr, NETGEAR834Bv2_BROADCOM, 3)==0))
551
552 {
553 retValue = 1; //Linksys disable EDCA turbo mode
554 }
555
556 return retValue;
557#endif
558}
559
560/********************************************************************************************************************
561 *function: Check whether we need to use OFDM to sned MGNT frame for broadcom AP
562 * input: struct ieee80211_network *network //current network we live
563 * output: none
564 * return: return 1 if true
565 * *****************************************************************************************************************/
566u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
567{
568 u8 retValue = 0;
569
570 // 2008/01/25 MH Judeg if we need to use OFDM to sned MGNT frame for broadcom AP.
571 // 2008/01/28 MH We must prevent that we select null bssid to link.
572
573 if(network->broadcom_cap_exist)
574 {
575 retValue = 1;
576 }
577
578 return retValue;
579}
580
581u8 HTIOTActIsCCDFsync(u8* PeerMacAddr)
582{
583 u8 retValue = 0;
584 if( (memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
585 (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0) ||
586 (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ==0))
587 {
588 retValue = 1;
589 }
590
591 return retValue;
592}
593
65a43784 594//
595// Send null data for to tell AP that we are awake.
596//
597bool
598HTIOTActIsNullDataPowerSaving(struct ieee80211_device* ieee,struct ieee80211_network *network)
599{
600 bool retValue = false;
601
602 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
603 {
604 if(pHTInfo->IOTPeer == HT_IOT_PEER_BROADCOM) // ||(pBssDesc->Vender == HT_IOT_PEER_ATHEROS && pBssDesc->SubTypeOfVender == HT_IOT_PEER_ATHEROS_DIR635))
605 return true;
606
607 }
608 return retValue;
609}
610
ecdfa446
GKH		 611void HTResetIOTSetting(
612 PRT_HIGH_THROUGHPUT pHTInfo
613)
614{
615 pHTInfo->IOTAction = 0;
616 pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
617}
618
619
620/********************************************************************************************************************
621 *function: Construct Capablility Element in Beacon... if HTEnable is turned on
622 * input: struct ieee80211_device* ieee
623 * u8* posHTCap //pointer to store Capability Ele
624 * u8* len //store length of CE
625 * u8 IsEncrypt //whether encrypt, needed further
626 * output: none
627 * return: none
628 * notice: posHTCap can't be null and should be initialized before.
629 * *****************************************************************************************************************/
630void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 IsEncrypt)
631{
632 PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
633 PHT_CAPABILITY_ELE pCapELE = NULL;
634 //u8 bIsDeclareMCS13;
635
636 if ((posHTCap == NULL) || (pHT == NULL))
637 {
638 IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTCap or pHTInfo can't be null in HTConstructCapabilityElement()\n");
639 return;
640 }
641 memset(posHTCap, 0, *len);
642 if(pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC)
643 {
644 u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
645 memcpy(posHTCap, EWC11NHTCap, sizeof(EWC11NHTCap));
646 pCapELE = (PHT_CAPABILITY_ELE)&(posHTCap[4]);
647 }else
648 {
649 pCapELE = (PHT_CAPABILITY_ELE)posHTCap;
650 }
651
652
653 //HT capability info
654 pCapELE->AdvCoding = 0; // This feature is not supported now!!
1e04ca7a 655 if (ieee->GetHalfNmodeSupportByAPsHandler(ieee))
ecdfa446
GKH		 656 {
657 pCapELE->ChlWidth = 0;
658 }
659 else
660 {
661 pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
662 }
663
664// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
665 pCapELE->MimoPwrSave = pHT->SelfMimoPs;
666 pCapELE->GreenField = 0; // This feature is not supported now!!
667 pCapELE->ShortGI20Mhz = 1; // We can receive Short GI!!
668 pCapELE->ShortGI40Mhz = 1; // We can receive Short GI!!
669 //DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r",
670 //pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
671 pCapELE->TxSTBC = 1;
672 pCapELE->RxSTBC = 0;
673 pCapELE->DelayBA = 0; // Do not support now!!
674 pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE>=7935)?1:0;
675 pCapELE->DssCCk = ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0);
676 pCapELE->PSMP = 0; // Do not support now!!
677 pCapELE->LSigTxopProtect = 0; // Do not support now!!
678
679
680 //MAC HT parameters info
681 // TODO: Nedd to take care of this part
682 IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
683
684 if( IsEncrypt)
685 {
686 pCapELE->MPDUDensity = 7; // 8us
687 pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K
688 }
689 else
690 {
691 pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K
692 pCapELE->MPDUDensity = 0; // no density
693 }
694
695 //Supported MCS set
696 memcpy(pCapELE->MCS, ieee->Regdot11HTOperationalRateSet, 16);
697 if(pHT->IOTAction & HT_IOT_ACT_DISABLE_MCS15)
698 pCapELE->MCS[1] &= 0x7f;
699
700 if(pHT->IOTAction & HT_IOT_ACT_DISABLE_MCS14)
701 pCapELE->MCS[1] &= 0xbf;
702
703 if(pHT->IOTAction & HT_IOT_ACT_DISABLE_ALL_2SS)
704 pCapELE->MCS[1] &= 0x00;
705
706 // 2008.06.12
707 // For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
1e04ca7a 708 if (ieee->GetHalfNmodeSupportByAPsHandler(ieee))
ecdfa446
GKH		 709 {
710 int i;
711 for(i = 1; i< 16; i++)
712 pCapELE->MCS[i] = 0;
713 }
714
715 //Extended HT Capability Info
716 memset(&pCapELE->ExtHTCapInfo, 0, 2);
717
718
719 //TXBF Capabilities
720 memset(pCapELE->TxBFCap, 0, 4);
721
722 //Antenna Selection Capabilities
723 pCapELE->ASCap = 0;
724//add 2 to give space for element ID and len when construct frames
725 if(pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC)
726 *len = 30 + 2;
727 else
728 *len = 26 + 2;
ecdfa446
GKH		 729}
730/********************************************************************************************************************
731 *function: Construct Information Element in Beacon... if HTEnable is turned on
732 * input: struct ieee80211_device* ieee
733 * u8* posHTCap //pointer to store Information Ele
734 * u8* len //store len of
735 * u8 IsEncrypt //whether encrypt, needed further
736 * output: none
737 * return: none
738 * notice: posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
739 * *****************************************************************************************************************/
740void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* len, u8 IsEncrypt)
741{
742 PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
743 PHT_INFORMATION_ELE pHTInfoEle = (PHT_INFORMATION_ELE)posHTInfo;
744 if ((posHTInfo == NULL) || (pHTInfoEle == NULL))
745 {
746 IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTInfo or pHTInfoEle can't be null in HTConstructInfoElement()\n");
747 return;
748 }
749
750 memset(posHTInfo, 0, *len);
751 if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) //ap mode is not currently supported
752 {
753 pHTInfoEle->ControlChl = ieee->current_network.channel;
754 pHTInfoEle->ExtChlOffset = ((pHT->bRegBW40MHz == false)?HT_EXTCHNL_OFFSET_NO_EXT:
755 (ieee->current_network.channel<=6)?
756 HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
757 pHTInfoEle->RecommemdedTxWidth = pHT->bRegBW40MHz;
758 pHTInfoEle->RIFS = 0;
759 pHTInfoEle->PSMPAccessOnly = 0;
760 pHTInfoEle->SrvIntGranularity = 0;
761 pHTInfoEle->OptMode = pHT->CurrentOpMode;
762 pHTInfoEle->NonGFDevPresent = 0;
763 pHTInfoEle->DualBeacon = 0;
764 pHTInfoEle->SecondaryBeacon = 0;
765 pHTInfoEle->LSigTxopProtectFull = 0;
766 pHTInfoEle->PcoActive = 0;
767 pHTInfoEle->PcoPhase = 0;
768
769 memset(pHTInfoEle->BasicMSC, 0, 16);
770
771
772 *len = 22 + 2; //same above
773
774 }
775 else
776 {
777 //STA should not generate High Throughput Information Element
778 *len = 0;
779 }
ecdfa446
GKH		 780}
781
782/*
783 * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
784 * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
785 * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
786 * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
787 * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
788 * at the same time.
789 *
790 * Frame Format
791 * Element ID Length OUI Type1 Reserved
792 * 1 byte 1 byte 3 bytes 1 byte 1 byte
793 *
794 * OUI = 0x00, 0xe0, 0x4c,
795 * Type = 0x02
796 * Reserved = 0x00
797 *
798 * 2007.8.21 by Emily
799*/
800/********************************************************************************************************************
801 *function: Construct Information Element in Beacon... in RT2RT condition
802 * input: struct ieee80211_device* ieee
803 * u8* posRT2RTAgg //pointer to store Information Ele
804 * u8* len //store len
805 * output: none
806 * return: none
807 * notice:
808 * *****************************************************************************************************************/
809void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, u8* len)
810{
811 if (posRT2RTAgg == NULL) {
812 IEEE80211_DEBUG(IEEE80211_DL_ERR, "posRT2RTAgg can't be null in HTConstructRT2RTAggElement()\n");
813 return;
814 }
815 memset(posRT2RTAgg, 0, *len);
816 *posRT2RTAgg++ = 0x00;
817 *posRT2RTAgg++ = 0xe0;
818 *posRT2RTAgg++ = 0x4c;
819 *posRT2RTAgg++ = 0x02;
820 *posRT2RTAgg++ = 0x01;
821 *posRT2RTAgg = 0x10;//*posRT2RTAgg = 0x02;
822
823 if(ieee->bSupportRemoteWakeUp) {
824 *posRT2RTAgg |= 0x08;//RT_HT_CAP_USE_WOW;
825 }
826
827 *len = 6 + 2;
828 return;
829#ifdef TODO
830#if(HAL_CODE_BASE == RTL8192 && DEV_BUS_TYPE == USB_INTERFACE)
831 /*
832 //Emily. If it is required to Ask Realtek AP to send AMPDU during AES mode, enable this
833 section of code.
834 if(IS_UNDER_11N_AES_MODE(Adapter))
835 {
836 posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
837 }else
838 {
839 posRT2RTAgg->Octet[5] &= 0xfb;
840 }
841 */
842
843#else
844 // Do Nothing
845#endif
846
847 posRT2RTAgg->Length = 6;
848#endif
849
850
851
852
853}
854
855
856/********************************************************************************************************************
857 *function: Pick the right Rate Adaptive table to use
858 * input: struct ieee80211_device* ieee
859 * u8* pOperateMCS //A pointer to MCS rate bitmap
860 * return: always we return true
861 * notice:
862 * *****************************************************************************************************************/
863u8 HT_PickMCSRate(struct ieee80211_device* ieee, u8* pOperateMCS)
864{
865 u8 i;
866 if (pOperateMCS == NULL)
867 {
868 IEEE80211_DEBUG(IEEE80211_DL_ERR, "pOperateMCS can't be null in HT_PickMCSRate()\n");
869 return false;
870 }
871
872 switch(ieee->mode)
873 {
874 case IEEE_A:
875 case IEEE_B:
876 case IEEE_G:
877 //legacy rate routine handled at selectedrate
878
879 //no MCS rate
880 for(i=0;i<=15;i++){
881 pOperateMCS[i] = 0;
882 }
883 break;
884
885 case IEEE_N_24G: //assume CCK rate ok
886 case IEEE_N_5G:
887 // Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
888 // Legacy part shall be handled at SelectRateSet().
889
890 //HT part
891 // TODO: may be different if we have different number of antenna
892 pOperateMCS[0] &=RATE_ADPT_1SS_MASK; //support MCS 0~7
893 pOperateMCS[1] &=RATE_ADPT_2SS_MASK;
894 pOperateMCS[3] &=RATE_ADPT_MCS32_MASK;
895 break;
896
897 //should never reach here
898 default:
899
900 break;
901
902 }
903
904 return true;
905}
906
907/*
908* Description:
909* This function will get the highest speed rate in input MCS set.
910*
911* /param Adapter Pionter to Adapter entity
912* pMCSRateSet Pointer to MCS rate bitmap
913* pMCSFilter Pointer to MCS rate filter
914*
915* /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
916*
917*/
918/********************************************************************************************************************
919 *function: This function will get the highest speed rate in input MCS set.
920 * input: struct ieee80211_device* ieee
921 * u8* pMCSRateSet //Pointer to MCS rate bitmap
922 * u8* pMCSFilter //Pointer to MCS rate filter
923 * return: Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter
924 * notice:
925 * *****************************************************************************************************************/
926u8 HTGetHighestMCSRate(struct ieee80211_device* ieee, u8* pMCSRateSet, u8* pMCSFilter)
927{
928 u8 i, j;
929 u8 bitMap;
930 u8 mcsRate = 0;
931 u8 availableMcsRate[16];
932 if (pMCSRateSet == NULL || pMCSFilter == NULL)
933 {
934 IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
935 return false;
936 }
937 for(i=0; i<16; i++)
938 availableMcsRate[i] = pMCSRateSet[i] & pMCSFilter[i];
939
940 for(i = 0; i < 16; i++)
941 {
942 if(availableMcsRate[i] != 0)
943 break;
944 }
945 if(i == 16)
946 return false;
947
948 for(i = 0; i < 16; i++)
949 {
950 if(availableMcsRate[i] != 0)
951 {
952 bitMap = availableMcsRate[i];
953 for(j = 0; j < 8; j++)
954 {
955 if((bitMap%2) != 0)
956 {
957 if(HTMcsToDataRate(ieee, (8*i+j)) > HTMcsToDataRate(ieee, mcsRate))
958 mcsRate = (8*i+j);
959 }
960 bitMap = bitMap>>1;
961 }
962 }
963 }
964 return (mcsRate|0x80);
965}
966
967
968
969/*
970**
971**1.Filter our operation rate set with AP's rate set
972**2.shall reference channel bandwidth, STBC, Antenna number
973**3.generate rate adative table for firmware
974**David 20060906
975**
976** \pHTSupportedCap: the connected STA's supported rate Capability element
977*/
978u8 HTFilterMCSRate( struct ieee80211_device* ieee, u8* pSupportMCS, u8* pOperateMCS)
979{
980
981 u8 i=0;
982
983 // filter out operational rate set not supported by AP, the lenth of it is 16
984 for(i=0;i<=15;i++){
985 pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
986 }
987
988
989 // TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
990
991 // TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
992 // we also shall suggested the first start rate set according to our singal strength
993 HT_PickMCSRate(ieee, pOperateMCS);
994
995 // For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
1e04ca7a 996 if (ieee->GetHalfNmodeSupportByAPsHandler(ieee))
ecdfa446
GKH		 997 pOperateMCS[1] = 0;
998
999 //
1000 // For RTL819X, we support only MCS0~15.
1001 // And also, we do not know how to use MCS32 now.
1002 //
1003 for(i=2; i<=15; i++)
1004 pOperateMCS[i] = 0;
1005
1006 return true;
1007}
1008void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
ecdfa446
GKH		 1009void HTOnAssocRsp(struct ieee80211_device *ieee)
1010{
1011 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
1012 PHT_CAPABILITY_ELE pPeerHTCap = NULL;
1013 PHT_INFORMATION_ELE pPeerHTInfo = NULL;
1014 u16 nMaxAMSDUSize = 0;
1015 u8* pMcsFilter = NULL;
1016
1017 static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
1018 static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
1019
1020 if( pHTInfo->bCurrentHTSupport == false )
1021 {
1022 IEEE80211_DEBUG(IEEE80211_DL_ERR, "<=== HTOnAssocRsp(): HT_DISABLE\n");
1023 return;
1024 }
1025 IEEE80211_DEBUG(IEEE80211_DL_HT, "===> HTOnAssocRsp_wq(): HT_ENABLE\n");
1026// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, pHTInfo->PeerHTCapBuf, sizeof(HT_CAPABILITY_ELE));
1027// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, pHTInfo->PeerHTInfoBuf, sizeof(HT_INFORMATION_ELE));
1028
1029// HTDebugHTCapability(pHTInfo->PeerHTCapBuf,"HTOnAssocRsp_wq");
1030// HTDebugHTInfo(pHTInfo->PeerHTInfoBuf,"HTOnAssocRsp_wq");
1031 //
1032 if(!memcmp(pHTInfo->PeerHTCapBuf,EWC11NHTCap, sizeof(EWC11NHTCap)))
1033 pPeerHTCap = (PHT_CAPABILITY_ELE)(&pHTInfo->PeerHTCapBuf[4]);
1034 else
1035 pPeerHTCap = (PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf);
1036
1037 if(!memcmp(pHTInfo->PeerHTInfoBuf, EWC11NHTInfo, sizeof(EWC11NHTInfo)))
1038 pPeerHTInfo = (PHT_INFORMATION_ELE)(&pHTInfo->PeerHTInfoBuf[4]);
1039 else
1040 pPeerHTInfo = (PHT_INFORMATION_ELE)(pHTInfo->PeerHTInfoBuf);
1041
1042
1043 ////////////////////////////////////////////////////////
1044 // Configurations:
1045 ////////////////////////////////////////////////////////
1046 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTCap, sizeof(HT_CAPABILITY_ELE));
1047// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE));
1048 // Config Supported Channel Width setting
1049 //
1050 HTSetConnectBwMode(ieee, (HT_CHANNEL_WIDTH)(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET)(pPeerHTInfo->ExtChlOffset));
1051
1052// if(pHTInfo->bCurBW40MHz == true)
1053 pHTInfo->bCurTxBW40MHz = ((pPeerHTInfo->RecommemdedTxWidth == 1)?true:false);
1054
1055 //
1056 // Update short GI/ long GI setting
1057 //
1058 // TODO:
1059 pHTInfo->bCurShortGI20MHz=
1060 ((pHTInfo->bRegShortGI20MHz)?((pPeerHTCap->ShortGI20Mhz==1)?true:false):false);
1061 pHTInfo->bCurShortGI40MHz=
1062 ((pHTInfo->bRegShortGI40MHz)?((pPeerHTCap->ShortGI40Mhz==1)?true:false):false);
1063
1064 //
1065 // Config TX STBC setting
1066 //
1067 // TODO:
1068
1069 //
1070 // Config DSSS/CCK mode in 40MHz mode
1071 //
1072 // TODO:
1073 pHTInfo->bCurSuppCCK =
1074 ((pHTInfo->bRegSuppCCK)?((pPeerHTCap->DssCCk==1)?true:false):false);
1075
1076
1077 //
1078 // Config and configure A-MSDU setting
1079 //
1080 pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
65a43784 1081 if (ieee->rtllib_ap_sec_type &&
1082 (ieee->rtllib_ap_sec_type(ieee)&(SEC_ALG_WEP|SEC_ALG_TKIP))){
1083 if( (pHTInfo->IOTPeer== HT_IOT_PEER_ATHEROS) ||
1084 (pHTInfo->IOTPeer == HT_IOT_PEER_UNKNOWN) )
1085 pHTInfo->bCurrentAMPDUEnable = false;
1086 }
1087
ecdfa446
GKH		 1088
1089 nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize==0)?3839:7935;
1090
1091 if(pHTInfo->nAMSDU_MaxSize > nMaxAMSDUSize )
1092 pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
1093 else
1094 pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
1095
1096
1097 //
1098 // Config A-MPDU setting
1099 //
1100 pHTInfo->bCurrentAMPDUEnable = pHTInfo->bAMPDUEnable;
1101
1102 // <1> Decide AMPDU Factor
1103
1104 // By Emily
1105 if(!pHTInfo->bRegRT2RTAggregation)
1106 {
1107 // Decide AMPDU Factor according to protocol handshake
1108 if(pHTInfo->AMPDU_Factor > pPeerHTCap->MaxRxAMPDUFactor)
1109 pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
1110 else
1111 pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
1112
1113 }else
1114 {
1115 // Set MPDU density to 2 to Realtek AP, and set it to 0 for others
1116 // Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
1117#if 0
1118 osTmp= PacketGetElement( asocpdu, EID_Vendor, OUI_SUB_REALTEK_AGG, OUI_SUBTYPE_DONT_CARE);
1119 if(osTmp.Length >= 5) //00:e0:4c:02:00
1120#endif
1121 if (ieee->current_network.bssht.bdRT2RTAggregation)
1122 {
1123 if( ieee->pairwise_key_type != KEY_TYPE_NA)
1124 // Realtek may set 32k in security mode and 64k for others
1125 pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
1126 else
1127 pHTInfo->CurrentAMPDUFactor = HT_AGG_SIZE_64K;
1128 }else
1129 {
1130 if(pPeerHTCap->MaxRxAMPDUFactor < HT_AGG_SIZE_32K)
1131 pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
1132 else
1133 pHTInfo->CurrentAMPDUFactor = HT_AGG_SIZE_32K;
1134 }
1135 }
1136
1137 // <2> Set AMPDU Minimum MPDU Start Spacing
1138 // 802.11n 3.0 section 9.7d.3
1139#if 1
1140 if(pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
1141 pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
1142 else
1143 pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
1144 if(ieee->pairwise_key_type != KEY_TYPE_NA )
1145 pHTInfo->CurrentMPDUDensity = 7; // 8us
1146#else
1147 if(pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
1148 pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
1149 else
1150 pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
1151#endif
1152 // Force TX AMSDU
1153
1154 // Lanhsin: mark for tmp to avoid deauth by ap from s3
1155 //if(memcmp(pMgntInfo->Bssid, NETGEAR834Bv2_BROADCOM, 3)==0)
1156 if(0)
1157 {
1158
1159 pHTInfo->bCurrentAMPDUEnable = false;
1160 pHTInfo->ForcedAMSDUMode = HT_AGG_FORCE_ENABLE;
1161 pHTInfo->ForcedAMSDUMaxSize = 7935;
1162
1163 pHTInfo->IOTAction |= HT_IOT_ACT_TX_USE_AMSDU_8K;
1164 }
1165
1166 // Rx Reorder Setting
1167 pHTInfo->bCurRxReorderEnable = pHTInfo->bRegRxReorderEnable;
1168
1169 //
1170 // Filter out unsupported HT rate for this AP
1171 // Update RATR table
1172 // This is only for 8190 ,8192 or later product which using firmware to handle rate adaptive mechanism.
1173 //
1174
1175 // Handle Ralink AP bad MCS rate set condition. Joseph.
1176 // This fix the bug of Ralink AP. This may be removed in the future.
1177 if(pPeerHTCap->MCS[0] == 0)
1178 pPeerHTCap->MCS[0] = 0xff;
1179
1180 HTFilterMCSRate(ieee, pPeerHTCap->MCS, ieee->dot11HTOperationalRateSet);
1181
1182 //
1183 // Config MIMO Power Save setting
1184 //
1185 pHTInfo->PeerMimoPs = pPeerHTCap->MimoPwrSave;
1186 if(pHTInfo->PeerMimoPs == MIMO_PS_STATIC)
1187 pMcsFilter = MCS_FILTER_1SS;
1188 else
1189 pMcsFilter = MCS_FILTER_ALL;
1190 //WB add for MCS8 bug
1191// pMcsFilter = MCS_FILTER_1SS;
1192 ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee, ieee->dot11HTOperationalRateSet, pMcsFilter);
1193 ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
1194
1195 //
1196 // Config current operation mode.
1197 //
1198 pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
1199
1200
1201
1202}
1203
1204void HTSetConnectBwModeCallback(struct ieee80211_device* ieee);
1205/********************************************************************************************************************
1206 *function: initialize HT info(struct PRT_HIGH_THROUGHPUT)
1207 * input: struct ieee80211_device* ieee
1208 * output: none
1209 * return: none
1210 * notice: This function is called when * (1) MPInitialization Phase * (2) Receiving of Deauthentication from AP
1211********************************************************************************************************************/
1212// TODO: Should this funciton be called when receiving of Disassociation?
1213void HTInitializeHTInfo(struct ieee80211_device* ieee)
1214{
1215 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
1216
1217 //
1218 // These parameters will be reset when receiving deauthentication packet
1219 //
1220 IEEE80211_DEBUG(IEEE80211_DL_HT, "===========>%s()\n", __FUNCTION__);
1221 pHTInfo->bCurrentHTSupport = false;
1222
1223 // 40MHz channel support
1224 pHTInfo->bCurBW40MHz = false;
1225 pHTInfo->bCurTxBW40MHz = false;
1226
1227 // Short GI support
1228 pHTInfo->bCurShortGI20MHz = false;
1229 pHTInfo->bCurShortGI40MHz = false;
1230 pHTInfo->bForcedShortGI = false;
1231
1232 // CCK rate support
1233 // This flag is set to true to support CCK rate by default.
1234 // It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities only when associate to
1235 // 11N BSS.
1236 pHTInfo->bCurSuppCCK = true;
1237
1238 // AMSDU related
1239 pHTInfo->bCurrent_AMSDU_Support = false;
1240 pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
1241
1242 // AMPUD related
1243 pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
1244 pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
1245
1246
1247
1248 // Initialize all of the parameters related to 11n
1249 memset((void*)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
1250 memset((void*)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
1251 memset((void*)(&(pHTInfo->PeerHTCapBuf)), 0, sizeof(pHTInfo->PeerHTCapBuf));
1252 memset((void*)(&(pHTInfo->PeerHTInfoBuf)), 0, sizeof(pHTInfo->PeerHTInfoBuf));
1253
1254 pHTInfo->bSwBwInProgress = false;
1255 pHTInfo->ChnlOp = CHNLOP_NONE;
1256
1257 // Set default IEEE spec for Draft N
1258 pHTInfo->ePeerHTSpecVer = HT_SPEC_VER_IEEE;
1259
1260 // Realtek proprietary aggregation mode
1261 pHTInfo->bCurrentRT2RTAggregation = false;
1262 pHTInfo->bCurrentRT2RTLongSlotTime = false;
1263 pHTInfo->IOTPeer = 0;
1264 pHTInfo->IOTAction = 0;
1265
1266 //MCS rate initialized here
1267 {
1268 u8* RegHTSuppRateSets = &(ieee->RegHTSuppRateSet[0]);
1269 RegHTSuppRateSets[0] = 0xFF; //support MCS 0~7
1270 RegHTSuppRateSets[1] = 0xFF; //support MCS 8~15
1271 RegHTSuppRateSets[4] = 0x01; //support MCS 32
1272 }
1273}
1274/********************************************************************************************************************
1275 *function: initialize Bss HT structure(struct PBSS_HT)
1276 * input: PBSS_HT pBssHT //to be initialized
1277 * output: none
1278 * return: none
1279 * notice: This function is called when initialize network structure
1280********************************************************************************************************************/
1281void HTInitializeBssDesc(PBSS_HT pBssHT)
1282{
1283
1284 pBssHT->bdSupportHT = false;
1285 memset(pBssHT->bdHTCapBuf, 0, sizeof(pBssHT->bdHTCapBuf));
1286 pBssHT->bdHTCapLen = 0;
1287 memset(pBssHT->bdHTInfoBuf, 0, sizeof(pBssHT->bdHTInfoBuf));
1288 pBssHT->bdHTInfoLen = 0;
1289
1290 pBssHT->bdHTSpecVer= HT_SPEC_VER_IEEE;
1291
1292 pBssHT->bdRT2RTAggregation = false;
1293 pBssHT->bdRT2RTLongSlotTime = false;
1294}
1295#if 0
1296//below function has merged into ieee80211_network_init() in ieee80211_rx.c
1297void
1298HTParsingHTCapElement(
1299 IN PADAPTER Adapter,
1300 IN OCTET_STRING HTCapIE,
1301 OUT PRT_WLAN_BSS pBssDesc
1302)
1303{
1304 PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
1305
1306 if( HTCapIE.Length > sizeof(pBssDesc->BssHT.bdHTCapBuf) )
1307 {
1308 RT_TRACE( COMP_HT, DBG_LOUD, ("HTParsingHTCapElement(): HT Capability Element length is too long!\n") );
1309 return;
1310 }
1311
1312 // TODO: Check the correctness of HT Cap
1313 //Print each field in detail. Driver should not print out this message by default
1314 if(!pMgntInfo->mActingAsAp && !pMgntInfo->mAssoc)
1315 HTDebugHTCapability(DBG_TRACE, Adapter, &HTCapIE, (pu8)"HTParsingHTCapElement()");
1316
1317 HTCapIE.Length = HTCapIE.Length > sizeof(pBssDesc->BssHT.bdHTCapBuf)?\
1318 sizeof(pBssDesc->BssHT.bdHTCapBuf):HTCapIE.Length; //prevent from overflow
1319
1320 CopyMem(pBssDesc->BssHT.bdHTCapBuf, HTCapIE.Octet, HTCapIE.Length);
1321 pBssDesc->BssHT.bdHTCapLen = HTCapIE.Length;
1322
1323}
1324
1325
1326void
1327HTParsingHTInfoElement(
1328 PADAPTER Adapter,
1329 OCTET_STRING HTInfoIE,
1330 PRT_WLAN_BSS pBssDesc
1331)
1332{
1333 PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
1334
1335 if( HTInfoIE.Length > sizeof(pBssDesc->BssHT.bdHTInfoBuf))
1336 {
1337 RT_TRACE( COMP_HT, DBG_LOUD, ("HTParsingHTInfoElement(): HT Information Element length is too long!\n") );
1338 return;
1339 }
1340
1341 // TODO: Check the correctness of HT Info
1342 //Print each field in detail. Driver should not print out this message by default
1343 if(!pMgntInfo->mActingAsAp && !pMgntInfo->mAssoc)
1344 HTDebugHTInfo(DBG_TRACE, Adapter, &HTInfoIE, (pu8)"HTParsingHTInfoElement()");
1345
1346 HTInfoIE.Length = HTInfoIE.Length > sizeof(pBssDesc->BssHT.bdHTInfoBuf)?\
1347 sizeof(pBssDesc->BssHT.bdHTInfoBuf):HTInfoIE.Length; //prevent from overflow
1348
1349 CopyMem( pBssDesc->BssHT.bdHTInfoBuf, HTInfoIE.Octet, HTInfoIE.Length);
1350 pBssDesc->BssHT.bdHTInfoLen = HTInfoIE.Length;
1351}
1352
1353/*
1354 * Get HT related information from beacon and save it in BssDesc
1355 *
1356 * (1) Parse HTCap, and HTInfo, and record whether it is 11n AP
1357 * (2) If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
1358 * (3) Check whether peer is Realtek AP (for Realtek proprietary aggregation mode).
1359 * Input:
1360 * PADAPTER Adapter
1361 *
1362 * Output:
1363 * PRT_TCB BssDesc
1364 *
1365*/
1366void HTGetValueFromBeaconOrProbeRsp(
1367 PADAPTER Adapter,
1368 POCTET_STRING pSRCmmpdu,
1369 PRT_WLAN_BSS bssDesc
1370)
1371{
1372 PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
1373 PRT_HIGH_THROUGHPUT pHTInfo = GET_HT_INFO(pMgntInfo);
1374 OCTET_STRING HTCapIE, HTInfoIE, HTRealtekAgg, mmpdu;
1375 OCTET_STRING BroadcomElement, CiscoElement;
1376
1377 mmpdu.Octet = pSRCmmpdu->Octet;
1378 mmpdu.Length = pSRCmmpdu->Length;
1379
1380 //2Note:
1381 // Mark for IOT testing using Linksys WRT350N, This AP does not contain WMM IE when
1382 // it is configured at pure-N mode.
1383 // if(bssDesc->BssQos.bdQoSMode & QOS_WMM)
1384 //
1385
1386 HTInitializeBssDesc (&bssDesc->BssHT);
1387
1388 //2<1> Parse HTCap, and HTInfo
1389 // Get HT Capability IE: (1) Get IEEE Draft N IE or (2) Get EWC IE
1390 HTCapIE = PacketGetElement(mmpdu, EID_HTCapability, OUI_SUB_DONT_CARE, OUI_SUBTYPE_DONT_CARE);
1391 if(HTCapIE.Length == 0)
1392 {
1393 HTCapIE = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_11N_EWC_HT_CAP, OUI_SUBTYPE_DONT_CARE);
1394 if(HTCapIE.Length != 0)
1395 bssDesc->BssHT.bdHTSpecVer= HT_SPEC_VER_EWC;
1396 }
1397 if(HTCapIE.Length != 0)
1398 HTParsingHTCapElement(Adapter, HTCapIE, bssDesc);
1399
1400 // Get HT Information IE: (1) Get IEEE Draft N IE or (2) Get EWC IE
1401 HTInfoIE = PacketGetElement(mmpdu, EID_HTInfo, OUI_SUB_DONT_CARE, OUI_SUBTYPE_DONT_CARE);
1402 if(HTInfoIE.Length == 0)
1403 {
1404 HTInfoIE = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_11N_EWC_HT_INFO, OUI_SUBTYPE_DONT_CARE);
1405 if(HTInfoIE.Length != 0)
1406 bssDesc->BssHT.bdHTSpecVer = HT_SPEC_VER_EWC;
1407 }
1408 if(HTInfoIE.Length != 0)
1409 HTParsingHTInfoElement(Adapter, HTInfoIE, bssDesc);
1410
1411 //2<2>If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
1412 if(HTCapIE.Length != 0)
1413 {
1414 bssDesc->BssHT.bdSupportHT = true;
1415 if(bssDesc->BssQos.bdQoSMode == QOS_DISABLE)
1416 QosSetLegacyWMMParamWithHT(Adapter, bssDesc);
1417 }
1418 else
1419 {
1420 bssDesc->BssHT.bdSupportHT = false;
1421 }
1422
1423 //2<3>Check whether the peer is Realtek AP/STA
1424 if(pHTInfo->bRegRT2RTAggregation)
1425 {
1426 if(bssDesc->BssHT.bdSupportHT)
1427 {
1428 HTRealtekAgg = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_REALTEK_AGG, OUI_SUBTYPE_DONT_CARE);
1429 if(HTRealtekAgg.Length >=5 )
1430 {
1431 bssDesc->BssHT.bdRT2RTAggregation = true;
1432
1433 if((HTRealtekAgg.Octet[4]==1) && (HTRealtekAgg.Octet[5] & 0x02))
1434 bssDesc->BssHT.bdRT2RTLongSlotTime = true;
1435 }
1436 }
1437 }
1438
1439 //
1440 // 2008/01/25 MH Get Broadcom AP IE for manamgent frame CCK rate problem.
1441 // AP can not receive CCK managemtn from from 92E.
1442 //
1443
1444 // Initialize every new bss broadcom cap exist as false..
1445 bssDesc->bBroadcomCapExist= false;
1446
1447 if(HTCapIE.Length != 0 || HTInfoIE.Length != 0)
1448 {
1449 u4Byte Length = 0;
1450
1451 FillOctetString(BroadcomElement, NULL, 0);
1452
1453 BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_1, OUI_SUBTYPE_DONT_CARE);
1454 Length += BroadcomElement.Length;
1455 BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_2, OUI_SUBTYPE_DONT_CARE);
1456 Length += BroadcomElement.Length;
1457 BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_3, OUI_SUBTYPE_DONT_CARE);
1458 Length += BroadcomElement.Length;
1459
1460 if(Length > 0)
1461 bssDesc->bBroadcomCapExist = true;
1462 }
1463
1464
1465 // For Cisco IOT issue
1466 CiscoElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_CISCO_IE, OUI_SUBTYPE_DONT_CARE);
1467 if(CiscoElement.Length != 0){ // 3: 0x00, 0x40, 0x96 ....
1468 bssDesc->bCiscoCapExist = true;
1469 }else{
1470 bssDesc->bCiscoCapExist = false;
1471 }
1472}
1473
1474
1475#endif
1476/********************************************************************************************************************
1477 *function: initialize Bss HT structure(struct PBSS_HT)
1478 * input: struct ieee80211_device *ieee
1479 * struct ieee80211_network *pNetwork //usually current network we are live in
1480 * output: none
1481 * return: none
1482 * notice: This function should ONLY be called before association
1483********************************************************************************************************************/
1484void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork)
1485{
1486 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
1487// u16 nMaxAMSDUSize;
1488// PHT_CAPABILITY_ELE pPeerHTCap = (PHT_CAPABILITY_ELE)pNetwork->bssht.bdHTCapBuf;
1489// PHT_INFORMATION_ELE pPeerHTInfo = (PHT_INFORMATION_ELE)pNetwork->bssht.bdHTInfoBuf;
1490// u8* pMcsFilter;
1491 u8 bIOTAction = 0;
1492
1493 //
1494 // Save Peer Setting before Association
1495 //
1496 IEEE80211_DEBUG(IEEE80211_DL_HT, "==============>%s()\n", __FUNCTION__);
1497 /*unmark bEnableHT flag here is the same reason why unmarked in function ieee80211_softmac_new_net. WB 2008.09.10*/
1498// if( pHTInfo->bEnableHT && pNetwork->bssht.bdSupportHT)
1499 if (pNetwork->bssht.bdSupportHT)
1500 {
1501 pHTInfo->bCurrentHTSupport = true;
1502 pHTInfo->ePeerHTSpecVer = pNetwork->bssht.bdHTSpecVer;
1503
1504 // Save HTCap and HTInfo information Element
1505 if(pNetwork->bssht.bdHTCapLen > 0 && pNetwork->bssht.bdHTCapLen <= sizeof(pHTInfo->PeerHTCapBuf))
1506 memcpy(pHTInfo->PeerHTCapBuf, pNetwork->bssht.bdHTCapBuf, pNetwork->bssht.bdHTCapLen);
1507
1508 if(pNetwork->bssht.bdHTInfoLen > 0 && pNetwork->bssht.bdHTInfoLen <= sizeof(pHTInfo->PeerHTInfoBuf))
1509 memcpy(pHTInfo->PeerHTInfoBuf, pNetwork->bssht.bdHTInfoBuf, pNetwork->bssht.bdHTInfoLen);
1510
1511 // Check whether RT to RT aggregation mode is enabled
1512 if(pHTInfo->bRegRT2RTAggregation)
1513 {
1514 pHTInfo->bCurrentRT2RTAggregation = pNetwork->bssht.bdRT2RTAggregation;
1515 pHTInfo->bCurrentRT2RTLongSlotTime = pNetwork->bssht.bdRT2RTLongSlotTime;
1516 }
1517 else
1518 {
1519 pHTInfo->bCurrentRT2RTAggregation = false;
1520 pHTInfo->bCurrentRT2RTLongSlotTime = false;
1521 }
1522
1523 // Determine the IOT Peer Vendor.
1524 HTIOTPeerDetermine(ieee);
1525
1526 // Decide IOT Action
1527 // Must be called after the parameter of pHTInfo->bCurrentRT2RTAggregation is decided
1528 pHTInfo->IOTAction = 0;
1529 bIOTAction = HTIOTActIsDisableMCS14(ieee, pNetwork->bssid);
1530 if(bIOTAction)
1531 pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_MCS14;
65a43784 1532 bIOTAction = HTIOTActIsForcedCTS2Self(ieee, pNetwork);
1533 if(bIOTAction)
1534 pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
ecdfa446
GKH		 1535
1536 bIOTAction = HTIOTActIsDisableMCS15(ieee);
1537 if(bIOTAction)
1538 pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_MCS15;
1539
1540 bIOTAction = HTIOTActIsDisableMCSTwoSpatialStream(ieee, pNetwork->bssid);
1541 if(bIOTAction)
1542 pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_ALL_2SS;
1543
1544
1545 bIOTAction = HTIOTActIsDisableEDCATurbo(ieee, pNetwork->bssid);
1546 if(bIOTAction)
1547 pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_EDCA_TURBO;
1548
1549 bIOTAction = HTIOTActIsMgntUseCCK6M(pNetwork);
1550 if(bIOTAction)
1551 pHTInfo->IOTAction |= HT_IOT_ACT_MGNT_USE_CCK_6M;
1552
1553 bIOTAction = HTIOTActIsCCDFsync(pNetwork->bssid);
1554 if(bIOTAction)
1555 pHTInfo->IOTAction |= HT_IOT_ACT_CDD_FSYNC;
1556
65a43784 1557 bIOTAction = HTIOTActIsNullDataPowerSaving(ieee, pNetwork);
1558 if(bIOTAction)
1559 pHTInfo->IOTAction |= HT_IOT_ACT_NULL_DATA_POWER_SAVING;
ecdfa446
GKH		 1560
1561 }
1562 else
1563 {
1564 pHTInfo->bCurrentHTSupport = false;
1565 pHTInfo->bCurrentRT2RTAggregation = false;
1566 pHTInfo->bCurrentRT2RTLongSlotTime = false;
1567
1568 pHTInfo->IOTAction = 0;
1569 }
1570
1571}
1572
1573void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork)
1574{
1575 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
1576// PHT_CAPABILITY_ELE pPeerHTCap = (PHT_CAPABILITY_ELE)pNetwork->bssht.bdHTCapBuf;
1577 PHT_INFORMATION_ELE pPeerHTInfo = (PHT_INFORMATION_ELE)pNetwork->bssht.bdHTInfoBuf;
1578
1579 if(pHTInfo->bCurrentHTSupport)
1580 {
1581 //
1582 // Config current operation mode.
1583 //
1584 if(pNetwork->bssht.bdHTInfoLen != 0)
1585 pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
1586
1587 //
1588 // <TODO: Config according to OBSS non-HT STA present!!>
1589 //
1590 }
1591}
1592
1593void HTUseDefaultSetting(struct ieee80211_device* ieee)
1594{
1595 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
1596// u8 regBwOpMode;
1597
1598 if(pHTInfo->bEnableHT)
1599 {
1600 pHTInfo->bCurrentHTSupport = true;
1601
1602 pHTInfo->bCurSuppCCK = pHTInfo->bRegSuppCCK;
1603
1604 pHTInfo->bCurBW40MHz = pHTInfo->bRegBW40MHz;
1605
1606 pHTInfo->bCurShortGI20MHz= pHTInfo->bRegShortGI20MHz;
1607
1608 pHTInfo->bCurShortGI40MHz= pHTInfo->bRegShortGI40MHz;
1609
1610 pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
1611
1612 pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
1613
1614 pHTInfo->bCurrentAMPDUEnable = pHTInfo->bAMPDUEnable;
1615
1616 pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
1617
1618 pHTInfo->CurrentMPDUDensity = pHTInfo->CurrentMPDUDensity;
1619
1620 // Set BWOpMode register
1621
1622 //update RATR index0
1623 HTFilterMCSRate(ieee, ieee->Regdot11HTOperationalRateSet, ieee->dot11HTOperationalRateSet);
1624 //function below is not implemented at all. WB
1625#ifdef TODO
1626 Adapter->HalFunc.InitHalRATRTableHandler( Adapter, &pMgntInfo->dot11OperationalRateSet, pMgntInfo->dot11HTOperationalRateSet);
1627#endif
1628 ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee, ieee->dot11HTOperationalRateSet, MCS_FILTER_ALL);
1629 ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
1630
1631 }
1632 else
1633 {
1634 pHTInfo->bCurrentHTSupport = false;
1635 }
ecdfa446
GKH		 1636}
1637/********************************************************************************************************************
1638 *function: check whether HT control field exists
1639 * input: struct ieee80211_device *ieee
1640 * u8* pFrame //coming skb->data
1641 * output: none
1642 * return: return true if HT control field exists(false otherwise)
1643 * notice:
1644********************************************************************************************************************/
1645u8 HTCCheck(struct ieee80211_device* ieee, u8* pFrame)
1646{
1647 if(ieee->pHTInfo->bCurrentHTSupport)
1648 {
1649 if( (IsQoSDataFrame(pFrame) && Frame_Order(pFrame)) == 1)
1650 {
1651 IEEE80211_DEBUG(IEEE80211_DL_HT, "HT CONTROL FILED EXIST!!\n");
1652 return true;
1653 }
1654 }
1655 return false;
1656}
1657
1658//
1659// This function set bandwidth mode in protocol layer.
1660//
1661void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset)
1662{
1663 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
1664// u32 flags = 0;
1665
1666 if(pHTInfo->bRegBW40MHz == false)
1667 return;
1668
1669
1670
1671 // To reduce dummy operation
1672// if((pHTInfo->bCurBW40MHz==false && Bandwidth==HT_CHANNEL_WIDTH_20) ||
1673// (pHTInfo->bCurBW40MHz==true && Bandwidth==HT_CHANNEL_WIDTH_20_40 && Offset==pHTInfo->CurSTAExtChnlOffset))
1674// return;
1675
1676// spin_lock_irqsave(&(ieee->bw_spinlock), flags);
1677 if(pHTInfo->bSwBwInProgress) {
1678// spin_unlock_irqrestore(&(ieee->bw_spinlock), flags);
1679 return;
1680 }
1681 //if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
1e04ca7a 1682 if (Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee)))
ecdfa446 1683 {
25985edc 1684 // Handle Illegal extension channel offset!!
ecdfa446
GKH		 1685 if(ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
1686 Offset = HT_EXTCHNL_OFFSET_NO_EXT;
1687 if(Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
1688 pHTInfo->bCurBW40MHz = true;
1689 pHTInfo->CurSTAExtChnlOffset = Offset;
1690 } else {
1691 pHTInfo->bCurBW40MHz = false;
1692 pHTInfo->CurSTAExtChnlOffset = HT_EXTCHNL_OFFSET_NO_EXT;
1693 }
1694 } else {
1695 pHTInfo->bCurBW40MHz = false;
1696 pHTInfo->CurSTAExtChnlOffset = HT_EXTCHNL_OFFSET_NO_EXT;
1697 }
1698
1699 pHTInfo->bSwBwInProgress = true;
1700
25985edc 1701 // TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that switching
ecdfa446
GKH		 1702 // bandwidth is executed after scan is finished. It is a temporal solution
1703 // because software should ganrantee the last operation of switching bandwidth
1704 // is executed properlly.
1705 HTSetConnectBwModeCallback(ieee);
1706
1707// spin_unlock_irqrestore(&(ieee->bw_spinlock), flags);
1708}
1709
1710void HTSetConnectBwModeCallback(struct ieee80211_device* ieee)
1711{
1712 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
1713
1714 IEEE80211_DEBUG(IEEE80211_DL_HT, "======>%s()\n", __FUNCTION__);
1715
1716 if(pHTInfo->bCurBW40MHz)
1717 {
1718 if(pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_UPPER)
09145962 1719 ieee->set_chan(ieee, ieee->current_network.channel+2);
ecdfa446 1720 else if(pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_LOWER)
09145962 1721 ieee->set_chan(ieee, ieee->current_network.channel-2);
ecdfa446 1722 else
09145962 1723 ieee->set_chan(ieee, ieee->current_network.channel);
ecdfa446 1724
1e04ca7a 1725 ieee->SetBWModeHandler(ieee, HT_CHANNEL_WIDTH_20_40, pHTInfo->CurSTAExtChnlOffset);
ecdfa446 1726 } else {
09145962 1727 ieee->set_chan(ieee, ieee->current_network.channel);
1e04ca7a 1728 ieee->SetBWModeHandler(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
ecdfa446
GKH		 1729 }
1730
1731 pHTInfo->bSwBwInProgress = false;
1732}
Linux 6.x block layer and io_uring tree(s)