staging:iio:adc:ad7476 unwind use of IIO_CHAN macro.

[linux-2.6-block.git] / drivers / staging / iio / adc / ad7476_core.c

/*
 * AD7466/7/8 AD7476/5/7/8 (A) SPI ADC driver
 *
 * Copyright 2010 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/module.h>

#include "../iio.h"
#include "../sysfs.h"
#include "../buffer.h"

#include "ad7476.h"

static int ad7476_scan_direct(struct ad7476_state *st)
{
	int ret;

	ret = spi_sync(st->spi, &st->msg);
	if (ret)
		return ret;

	return (st->data[0] << 8) | st->data[1];
}

static int ad7476_read_raw(struct iio_dev *indio_dev,
			   struct iio_chan_spec const *chan,
			   int *val,
			   int *val2,
			   long m)
{
	int ret;
	struct ad7476_state *st = iio_priv(indio_dev);
	unsigned int scale_uv;

	switch (m) {
	case 0:
		mutex_lock(&indio_dev->mlock);
		if (iio_buffer_enabled(indio_dev))
			ret = -EBUSY;
		else
			ret = ad7476_scan_direct(st);
		mutex_unlock(&indio_dev->mlock);

		if (ret < 0)
			return ret;
		*val = (ret >> st->chip_info->channel[0].scan_type.shift) &
			RES_MASK(st->chip_info->channel[0].scan_type.realbits);
		return IIO_VAL_INT;
	case IIO_CHAN_INFO_SCALE:
		scale_uv = (st->int_vref_mv * 1000)
			>> st->chip_info->channel[0].scan_type.realbits;
		*val =  scale_uv/1000;
		*val2 = (scale_uv%1000)*1000;
		return IIO_VAL_INT_PLUS_MICRO;
	}
	return -EINVAL;
}

#define AD7476_CHAN(bits)					\
	{							\
	.type = IIO_VOLTAGE,					\
	.indexed = 1,						\
	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
	.scan_type = {						\
		.sign = 'u',					\
		.realbits = bits,				\
		.storagebits = 16,				\
		.shift = 12 - bits,				\
	},							\
}

static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
	[ID_AD7466] = {
		.channel[0] = AD7476_CHAN(12),
		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
	},
	[ID_AD7467] = {
		.channel[0] = AD7476_CHAN(10),
		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
	},
	[ID_AD7468] = {
		.channel[0] = AD7476_CHAN(8),
		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
	},
	[ID_AD7475] = {
		.channel[0] = AD7476_CHAN(12),
		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
	},
	[ID_AD7476] = {
		.channel[0] = AD7476_CHAN(12),
		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
	},
	[ID_AD7477] = {
		.channel[0] = AD7476_CHAN(10),
		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
	},
	[ID_AD7478] = {
		.channel[0] = AD7476_CHAN(8),
		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
	},
	[ID_AD7495] = {
		.channel[0] = AD7476_CHAN(12),
		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
		.int_vref_mv = 2500,
	},
};

static const struct iio_info ad7476_info = {
	.driver_module = THIS_MODULE,
	.read_raw = &ad7476_read_raw,
};

static int __devinit ad7476_probe(struct spi_device *spi)
{
	struct ad7476_platform_data *pdata = spi->dev.platform_data;
	struct ad7476_state *st;
	struct iio_dev *indio_dev;
	int ret, voltage_uv = 0;

	indio_dev = iio_allocate_device(sizeof(*st));
	if (indio_dev == NULL) {
		ret = -ENOMEM;
		goto error_ret;
	}
	st = iio_priv(indio_dev);
	st->reg = regulator_get(&spi->dev, "vcc");
	if (!IS_ERR(st->reg)) {
		ret = regulator_enable(st->reg);
		if (ret)
			goto error_put_reg;

		voltage_uv = regulator_get_voltage(st->reg);
	}
	st->chip_info =
		&ad7476_chip_info_tbl[spi_get_device_id(spi)->driver_data];

	if (st->chip_info->int_vref_mv)
		st->int_vref_mv = st->chip_info->int_vref_mv;
	else if (pdata && pdata->vref_mv)
		st->int_vref_mv = pdata->vref_mv;
	else if (voltage_uv)
		st->int_vref_mv = voltage_uv / 1000;
	else
		dev_warn(&spi->dev, "reference voltage unspecified\n");

	spi_set_drvdata(spi, indio_dev);

	st->spi = spi;

	/* Establish that the iio_dev is a child of the spi device */
	indio_dev->dev.parent = &spi->dev;
	indio_dev->name = spi_get_device_id(spi)->name;
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->channels = st->chip_info->channel;
	indio_dev->num_channels = 2;
	indio_dev->info = &ad7476_info;
	/* Setup default message */

	st->xfer.rx_buf = &st->data;
	st->xfer.len = st->chip_info->channel[0].scan_type.storagebits / 8;

	spi_message_init(&st->msg);
	spi_message_add_tail(&st->xfer, &st->msg);

	ret = ad7476_register_ring_funcs_and_init(indio_dev);
	if (ret)
		goto error_disable_reg;

	ret = iio_buffer_register(indio_dev,
				  st->chip_info->channel,
				  ARRAY_SIZE(st->chip_info->channel));
	if (ret)
		goto error_cleanup_ring;

	ret = iio_device_register(indio_dev);
	if (ret)
		goto error_ring_unregister;
	return 0;

error_ring_unregister:
	iio_buffer_unregister(indio_dev);
error_cleanup_ring:
	ad7476_ring_cleanup(indio_dev);
error_disable_reg:
	if (!IS_ERR(st->reg))
		regulator_disable(st->reg);
error_put_reg:
	if (!IS_ERR(st->reg))
		regulator_put(st->reg);
	iio_free_device(indio_dev);

error_ret:
	return ret;
}

static int ad7476_remove(struct spi_device *spi)
{
	struct iio_dev *indio_dev = spi_get_drvdata(spi);
	struct ad7476_state *st = iio_priv(indio_dev);

	iio_device_unregister(indio_dev);
	iio_buffer_unregister(indio_dev);
	ad7476_ring_cleanup(indio_dev);
	if (!IS_ERR(st->reg)) {
		regulator_disable(st->reg);
		regulator_put(st->reg);
	}
	iio_free_device(indio_dev);

	return 0;
}

static const struct spi_device_id ad7476_id[] = {
	{"ad7466", ID_AD7466},
	{"ad7467", ID_AD7467},
	{"ad7468", ID_AD7468},
	{"ad7475", ID_AD7475},
	{"ad7476", ID_AD7476},
	{"ad7476a", ID_AD7476},
	{"ad7477", ID_AD7477},
	{"ad7477a", ID_AD7477},
	{"ad7478", ID_AD7478},
	{"ad7478a", ID_AD7478},
	{"ad7495", ID_AD7495},
	{}
};
MODULE_DEVICE_TABLE(spi, ad7476_id);

static struct spi_driver ad7476_driver = {
	.driver = {
		.name	= "ad7476",
		.owner	= THIS_MODULE,
	},
	.probe		= ad7476_probe,
	.remove		= __devexit_p(ad7476_remove),
	.id_table	= ad7476_id,
};
module_spi_driver(ad7476_driver);

MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("Analog Devices AD7475/6/7/8(A) AD7466/7/8 ADC");
MODULE_LICENSE("GPL v2");