[linux-2.6-block.git] / drivers / spi / spi-dw.h

#ifndef DW_SPI_HEADER_H
#define DW_SPI_HEADER_H

#include <linux/io.h>
#include <linux/scatterlist.h>

/* Register offsets */
#define DW_SPI_CTRL0			0x00
#define DW_SPI_CTRL1			0x04
#define DW_SPI_SSIENR			0x08
#define DW_SPI_MWCR			0x0c
#define DW_SPI_SER			0x10
#define DW_SPI_BAUDR			0x14
#define DW_SPI_TXFLTR			0x18
#define DW_SPI_RXFLTR			0x1c
#define DW_SPI_TXFLR			0x20
#define DW_SPI_RXFLR			0x24
#define DW_SPI_SR			0x28
#define DW_SPI_IMR			0x2c
#define DW_SPI_ISR			0x30
#define DW_SPI_RISR			0x34
#define DW_SPI_TXOICR			0x38
#define DW_SPI_RXOICR			0x3c
#define DW_SPI_RXUICR			0x40
#define DW_SPI_MSTICR			0x44
#define DW_SPI_ICR			0x48
#define DW_SPI_DMACR			0x4c
#define DW_SPI_DMATDLR			0x50
#define DW_SPI_DMARDLR			0x54
#define DW_SPI_IDR			0x58
#define DW_SPI_VERSION			0x5c
#define DW_SPI_DR			0x60

/* Bit fields in CTRLR0 */
#define SPI_DFS_OFFSET			0

#define SPI_FRF_OFFSET			4
#define SPI_FRF_SPI			0x0
#define SPI_FRF_SSP			0x1
#define SPI_FRF_MICROWIRE		0x2
#define SPI_FRF_RESV			0x3

#define SPI_MODE_OFFSET			6
#define SPI_SCPH_OFFSET			6
#define SPI_SCOL_OFFSET			7

#define SPI_TMOD_OFFSET			8
#define SPI_TMOD_MASK			(0x3 << SPI_TMOD_OFFSET)
#define	SPI_TMOD_TR			0x0		/* xmit & recv */
#define SPI_TMOD_TO			0x1		/* xmit only */
#define SPI_TMOD_RO			0x2		/* recv only */
#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */

#define SPI_SLVOE_OFFSET		10
#define SPI_SRL_OFFSET			11
#define SPI_CFS_OFFSET			12

/* Bit fields in SR, 7 bits */
#define SR_MASK				0x7f		/* cover 7 bits */
#define SR_BUSY				(1 << 0)
#define SR_TF_NOT_FULL			(1 << 1)
#define SR_TF_EMPT			(1 << 2)
#define SR_RF_NOT_EMPT			(1 << 3)
#define SR_RF_FULL			(1 << 4)
#define SR_TX_ERR			(1 << 5)
#define SR_DCOL				(1 << 6)

/* Bit fields in ISR, IMR, RISR, 7 bits */
#define SPI_INT_TXEI			(1 << 0)
#define SPI_INT_TXOI			(1 << 1)
#define SPI_INT_RXUI			(1 << 2)
#define SPI_INT_RXOI			(1 << 3)
#define SPI_INT_RXFI			(1 << 4)
#define SPI_INT_MSTI			(1 << 5)

/* TX RX interrupt level threshold, max can be 256 */
#define SPI_INT_THRESHOLD		32

enum dw_ssi_type {
	SSI_MOTO_SPI = 0,
	SSI_TI_SSP,
	SSI_NS_MICROWIRE,
};

struct dw_spi;
struct dw_spi_dma_ops {
	int (*dma_init)(struct dw_spi *dws);
	void (*dma_exit)(struct dw_spi *dws);
	int (*dma_transfer)(struct dw_spi *dws, int cs_change);
};

struct dw_spi {
	struct spi_master	*master;
	struct spi_device	*cur_dev;
	struct device		*parent_dev;
	enum dw_ssi_type	type;
	char			name[16];

	void __iomem		*regs;
	unsigned long		paddr;
	u32			iolen;
	int			irq;
	u32			fifo_len;	/* depth of the FIFO buffer */
	u32			max_freq;	/* max bus freq supported */

	u16			bus_num;
	u16			num_cs;		/* supported slave numbers */

	/* Driver message queue */
	struct workqueue_struct	*workqueue;
	struct work_struct	pump_messages;
	spinlock_t		lock;
	struct list_head	queue;
	int			busy;
	int			run;

	/* Message Transfer pump */
	struct tasklet_struct	pump_transfers;

	/* Current message transfer state info */
	struct spi_message	*cur_msg;
	struct spi_transfer	*cur_transfer;
	struct chip_data	*cur_chip;
	struct chip_data	*prev_chip;
	size_t			len;
	void			*tx;
	void			*tx_end;
	void			*rx;
	void			*rx_end;
	int			dma_mapped;
	dma_addr_t		rx_dma;
	dma_addr_t		tx_dma;
	size_t			rx_map_len;
	size_t			tx_map_len;
	u8			n_bytes;	/* current is a 1/2 bytes op */
	u8			max_bits_per_word;	/* maxim is 16b */
	u32			dma_width;
	int			cs_change;
	irqreturn_t		(*transfer_handler)(struct dw_spi *dws);
	void			(*cs_control)(u32 command);

	/* Dma info */
	int			dma_inited;
	struct dma_chan		*txchan;
	struct scatterlist	tx_sgl;
	struct dma_chan		*rxchan;
	struct scatterlist	rx_sgl;
	int			dma_chan_done;
	struct device		*dma_dev;
	dma_addr_t		dma_addr; /* phy address of the Data register */
	struct dw_spi_dma_ops	*dma_ops;
	void			*dma_priv; /* platform relate info */
	struct pci_dev		*dmac;

	/* Bus interface info */
	void			*priv;
#ifdef CONFIG_DEBUG_FS
	struct dentry *debugfs;
#endif
};

static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
{
	return __raw_readl(dws->regs + offset);
}

static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
{
	__raw_writel(val, dws->regs + offset);
}

static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
{
	return __raw_readw(dws->regs + offset);
}

static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
{
	__raw_writew(val, dws->regs + offset);
}

static inline void spi_enable_chip(struct dw_spi *dws, int enable)
{
	dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
}

static inline void spi_set_clk(struct dw_spi *dws, u16 div)
{
	dw_writel(dws, DW_SPI_BAUDR, div);
}

static inline void spi_chip_sel(struct dw_spi *dws, u16 cs)
{
	if (cs > dws->num_cs)
		return;

	if (dws->cs_control)
		dws->cs_control(1);

	dw_writel(dws, DW_SPI_SER, 1 << cs);
}

/* Disable IRQ bits */
static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
{
	u32 new_mask;

	new_mask = dw_readl(dws, DW_SPI_IMR) & ~mask;
	dw_writel(dws, DW_SPI_IMR, new_mask);
}

/* Enable IRQ bits */
static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
{
	u32 new_mask;

	new_mask = dw_readl(dws, DW_SPI_IMR) | mask;
	dw_writel(dws, DW_SPI_IMR, new_mask);
}

/*
 * Each SPI slave device to work with dw_api controller should
 * has such a structure claiming its working mode (PIO/DMA etc),
 * which can be save in the "controller_data" member of the
 * struct spi_device
 */
struct dw_spi_chip {
	u8 poll_mode;	/* 0 for contoller polling mode */
	u8 type;	/* SPI/SSP/Micrwire */
	u8 enable_dma;
	void (*cs_control)(u32 command);
};

extern int dw_spi_add_host(struct dw_spi *dws);
extern void dw_spi_remove_host(struct dw_spi *dws);
extern int dw_spi_suspend_host(struct dw_spi *dws);
extern int dw_spi_resume_host(struct dw_spi *dws);
extern void dw_spi_xfer_done(struct dw_spi *dws);

/* platform related setup */
extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
#endif /* DW_SPI_HEADER_H */
Commit	Line	Data
e24c7452 FT	1	#ifndef DW_SPI_HEADER_H
e24c7452 FT	2	#define DW_SPI_HEADER_H
7063c0d9	3
e24c7452	4	#include <linux/io.h>
46165a3d	5	#include <linux/scatterlist.h>
e24c7452	6
7eb187b3 HS	7	/* Register offsets */
	8	#define DW_SPI_CTRL0 0x00
	9	#define DW_SPI_CTRL1 0x04
	10	#define DW_SPI_SSIENR 0x08
	11	#define DW_SPI_MWCR 0x0c
	12	#define DW_SPI_SER 0x10
	13	#define DW_SPI_BAUDR 0x14
	14	#define DW_SPI_TXFLTR 0x18
	15	#define DW_SPI_RXFLTR 0x1c
	16	#define DW_SPI_TXFLR 0x20
	17	#define DW_SPI_RXFLR 0x24
	18	#define DW_SPI_SR 0x28
	19	#define DW_SPI_IMR 0x2c
	20	#define DW_SPI_ISR 0x30
	21	#define DW_SPI_RISR 0x34
	22	#define DW_SPI_TXOICR 0x38
	23	#define DW_SPI_RXOICR 0x3c
	24	#define DW_SPI_RXUICR 0x40
	25	#define DW_SPI_MSTICR 0x44
	26	#define DW_SPI_ICR 0x48
	27	#define DW_SPI_DMACR 0x4c
	28	#define DW_SPI_DMATDLR 0x50
	29	#define DW_SPI_DMARDLR 0x54
	30	#define DW_SPI_IDR 0x58
	31	#define DW_SPI_VERSION 0x5c
	32	#define DW_SPI_DR 0x60
	33
e24c7452 FT	34	/* Bit fields in CTRLR0 */
	35	#define SPI_DFS_OFFSET 0
	36
	37	#define SPI_FRF_OFFSET 4
	38	#define SPI_FRF_SPI 0x0
	39	#define SPI_FRF_SSP 0x1
	40	#define SPI_FRF_MICROWIRE 0x2
	41	#define SPI_FRF_RESV 0x3
	42
	43	#define SPI_MODE_OFFSET 6
	44	#define SPI_SCPH_OFFSET 6
	45	#define SPI_SCOL_OFFSET 7
e3e55ff5	46
e24c7452	47	#define SPI_TMOD_OFFSET 8
e3e55ff5	48	#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET)
e24c7452 FT	49	#define SPI_TMOD_TR 0x0 /* xmit & recv */
	50	#define SPI_TMOD_TO 0x1 /* xmit only */
	51	#define SPI_TMOD_RO 0x2 /* recv only */
	52	#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
	53
	54	#define SPI_SLVOE_OFFSET 10
	55	#define SPI_SRL_OFFSET 11
	56	#define SPI_CFS_OFFSET 12
	57
	58	/* Bit fields in SR, 7 bits */
	59	#define SR_MASK 0x7f /* cover 7 bits */
	60	#define SR_BUSY (1 << 0)
	61	#define SR_TF_NOT_FULL (1 << 1)
	62	#define SR_TF_EMPT (1 << 2)
	63	#define SR_RF_NOT_EMPT (1 << 3)
	64	#define SR_RF_FULL (1 << 4)
	65	#define SR_TX_ERR (1 << 5)
	66	#define SR_DCOL (1 << 6)
	67
	68	/* Bit fields in ISR, IMR, RISR, 7 bits */
	69	#define SPI_INT_TXEI (1 << 0)
	70	#define SPI_INT_TXOI (1 << 1)
	71	#define SPI_INT_RXUI (1 << 2)
	72	#define SPI_INT_RXOI (1 << 3)
	73	#define SPI_INT_RXFI (1 << 4)
	74	#define SPI_INT_MSTI (1 << 5)
	75
25985edc	76	/* TX RX interrupt level threshold, max can be 256 */
e24c7452 FT	77	#define SPI_INT_THRESHOLD 32
	78
	79	enum dw_ssi_type {
	80	SSI_MOTO_SPI = 0,
	81	SSI_TI_SSP,
	82	SSI_NS_MICROWIRE,
	83	};
	84
7063c0d9 FT	85	struct dw_spi;
	86	struct dw_spi_dma_ops {
	87	int (dma_init)(struct dw_spi dws);
	88	void (dma_exit)(struct dw_spi dws);
	89	int (dma_transfer)(struct dw_spi dws, int cs_change);
	90	};
	91
e24c7452 FT	92	struct dw_spi {
	93	struct spi_master *master;
	94	struct spi_device *cur_dev;
	95	struct device *parent_dev;
	96	enum dw_ssi_type type;
40bfff85	97	char name[16];
e24c7452 FT	98
	99	void __iomem *regs;
	100	unsigned long paddr;
	101	u32 iolen;
	102	int irq;
552e4509	103	u32 fifo_len; /* depth of the FIFO buffer */
e24c7452 FT	104	u32 max_freq; /* max bus freq supported */
	105
	106	u16 bus_num;
	107	u16 num_cs; /* supported slave numbers */
	108
	109	/* Driver message queue */
	110	struct workqueue_struct *workqueue;
	111	struct work_struct pump_messages;
	112	spinlock_t lock;
	113	struct list_head queue;
	114	int busy;
	115	int run;
	116
	117	/* Message Transfer pump */
	118	struct tasklet_struct pump_transfers;
	119
	120	/* Current message transfer state info */
	121	struct spi_message *cur_msg;
	122	struct spi_transfer *cur_transfer;
	123	struct chip_data *cur_chip;
	124	struct chip_data *prev_chip;
	125	size_t len;
	126	void *tx;
	127	void *tx_end;
	128	void *rx;
	129	void *rx_end;
	130	int dma_mapped;
	131	dma_addr_t rx_dma;
	132	dma_addr_t tx_dma;
	133	size_t rx_map_len;
	134	size_t tx_map_len;
	135	u8 n_bytes; /* current is a 1/2 bytes op */
	136	u8 max_bits_per_word; /* maxim is 16b */
	137	u32 dma_width;
	138	int cs_change;
e24c7452 FT	139	irqreturn_t (transfer_handler)(struct dw_spi dws);
	140	void (*cs_control)(u32 command);
	141
	142	/* Dma info */
	143	int dma_inited;
	144	struct dma_chan *txchan;
7063c0d9	145	struct scatterlist tx_sgl;
e24c7452	146	struct dma_chan *rxchan;
7063c0d9 FT	147	struct scatterlist rx_sgl;
7063c0d9 FT	148	int dma_chan_done;
e24c7452	149	struct device *dma_dev;
7063c0d9 FT	150	dma_addr_t dma_addr; /* phy address of the Data register */
	151	struct dw_spi_dma_ops *dma_ops;
	152	void dma_priv; / platform relate info */
	153	struct pci_dev *dmac;
e24c7452 FT	154
	155	/* Bus interface info */
	156	void *priv;
	157	#ifdef CONFIG_DEBUG_FS
	158	struct dentry *debugfs;
	159	#endif
	160	};
	161
7eb187b3 HS	162	static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
	163	{
	164	return __raw_readl(dws->regs + offset);
	165	}
	166
	167	static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
	168	{
	169	__raw_writel(val, dws->regs + offset);
	170	}
	171
	172	static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
	173	{
	174	return __raw_readw(dws->regs + offset);
	175	}
	176
	177	static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
	178	{
	179	__raw_writew(val, dws->regs + offset);
	180	}
e24c7452 FT	181
	182	static inline void spi_enable_chip(struct dw_spi *dws, int enable)
	183	{
7eb187b3	184	dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
e24c7452 FT	185	}
	186
	187	static inline void spi_set_clk(struct dw_spi *dws, u16 div)
	188	{
7eb187b3	189	dw_writel(dws, DW_SPI_BAUDR, div);
e24c7452 FT	190	}
	191
	192	static inline void spi_chip_sel(struct dw_spi *dws, u16 cs)
	193	{
	194	if (cs > dws->num_cs)
	195	return;
83fe518a GS	196
	197	if (dws->cs_control)
	198	dws->cs_control(1);
	199
7eb187b3	200	dw_writel(dws, DW_SPI_SER, 1 << cs);
e24c7452 FT	201	}
	202
	203	/* Disable IRQ bits */
	204	static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
	205	{
	206	u32 new_mask;
	207
7eb187b3 HS	208	new_mask = dw_readl(dws, DW_SPI_IMR) & ~mask;
7eb187b3 HS	209	dw_writel(dws, DW_SPI_IMR, new_mask);
e24c7452 FT	210	}
	211
	212	/* Enable IRQ bits */
	213	static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
	214	{
	215	u32 new_mask;
	216
7eb187b3 HS	217	new_mask = dw_readl(dws, DW_SPI_IMR) \| mask;
7eb187b3 HS	218	dw_writel(dws, DW_SPI_IMR, new_mask);
e24c7452 FT	219	}
	220
	221	/*
	222	* Each SPI slave device to work with dw_api controller should
	223	* has such a structure claiming its working mode (PIO/DMA etc),
	224	* which can be save in the "controller_data" member of the
	225	* struct spi_device
	226	*/
	227	struct dw_spi_chip {
	228	u8 poll_mode; /* 0 for contoller polling mode */
	229	u8 type; /* SPI/SSP/Micrwire */
	230	u8 enable_dma;
	231	void (*cs_control)(u32 command);
	232	};
	233
	234	extern int dw_spi_add_host(struct dw_spi *dws);
	235	extern void dw_spi_remove_host(struct dw_spi *dws);
	236	extern int dw_spi_suspend_host(struct dw_spi *dws);
	237	extern int dw_spi_resume_host(struct dw_spi *dws);
7063c0d9 FT	238	extern void dw_spi_xfer_done(struct dw_spi *dws);
	239
	240	/* platform related setup */
	241	extern int dw_spi_mid_init(struct dw_spi dws); / Intel MID platforms */
e24c7452	242	#endif /* DW_SPI_HEADER_H */