[linux-2.6-block.git] / drivers / spi / spi-cavium-thunderx.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Cavium ThunderX SPI driver.
 *
 * Copyright (C) 2016 Cavium Inc.
 * Authors: Jan Glauber <jglauber@cavium.com>
 */

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spi/spi.h>

#include "spi-cavium.h"

#define DRV_NAME "spi-thunderx"

#define SYS_FREQ_DEFAULT 700000000 /* 700 Mhz */

static int thunderx_spi_probe(struct pci_dev *pdev,
			      const struct pci_device_id *ent)
{
	struct device *dev = &pdev->dev;
	struct spi_master *master;
	struct octeon_spi *p;
	int ret;

	master = spi_alloc_master(dev, sizeof(struct octeon_spi));
	if (!master)
		return -ENOMEM;

	p = spi_master_get_devdata(master);

	ret = pcim_enable_device(pdev);
	if (ret)
		goto error;

	ret = pci_request_regions(pdev, DRV_NAME);
	if (ret)
		goto error;

	p->register_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
	if (!p->register_base) {
		ret = -EINVAL;
		goto error;
	}

	p->regs.config = 0x1000;
	p->regs.status = 0x1008;
	p->regs.tx = 0x1010;
	p->regs.data = 0x1080;

	p->clk = devm_clk_get(dev, NULL);
	if (IS_ERR(p->clk)) {
		ret = PTR_ERR(p->clk);
		goto error;
	}

	ret = clk_prepare_enable(p->clk);
	if (ret)
		goto error;

	p->sys_freq = clk_get_rate(p->clk);
	if (!p->sys_freq)
		p->sys_freq = SYS_FREQ_DEFAULT;
	dev_info(dev, "Set system clock to %u\n", p->sys_freq);

	master->num_chipselect = 4;
	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH |
			    SPI_LSB_FIRST | SPI_3WIRE;
	master->transfer_one_message = octeon_spi_transfer_one_message;
	master->bits_per_word_mask = SPI_BPW_MASK(8);
	master->max_speed_hz = OCTEON_SPI_MAX_CLOCK_HZ;
	master->dev.of_node = pdev->dev.of_node;

	pci_set_drvdata(pdev, master);

	ret = devm_spi_register_master(dev, master);
	if (ret)
		goto error;

	return 0;

error:
	clk_disable_unprepare(p->clk);
	spi_master_put(master);
	return ret;
}

static void thunderx_spi_remove(struct pci_dev *pdev)
{
	struct spi_master *master = pci_get_drvdata(pdev);
	struct octeon_spi *p;

	p = spi_master_get_devdata(master);
	if (!p)
		return;

	clk_disable_unprepare(p->clk);
	/* Put everything in a known state. */
	writeq(0, p->register_base + OCTEON_SPI_CFG(p));
}

static const struct pci_device_id thunderx_spi_pci_id_table[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa00b) },
	{ 0, }
};

MODULE_DEVICE_TABLE(pci, thunderx_spi_pci_id_table);

static struct pci_driver thunderx_spi_driver = {
	.name		= DRV_NAME,
	.id_table	= thunderx_spi_pci_id_table,
	.probe		= thunderx_spi_probe,
	.remove		= thunderx_spi_remove,
};

module_pci_driver(thunderx_spi_driver);

MODULE_DESCRIPTION("Cavium, Inc. ThunderX SPI bus driver");
MODULE_AUTHOR("Jan Glauber");
MODULE_LICENSE("GPL");
Commit	Line	Data
09c434b8	1	// SPDX-License-Identifier: GPL-2.0-only
7347a6c7 JG	2	/*
	3	* Cavium ThunderX SPI driver.
	4	*
	5	* Copyright (C) 2016 Cavium Inc.
	6	* Authors: Jan Glauber <jglauber@cavium.com>
	7	*/
	8
	9	#include <linux/module.h>
	10	#include <linux/pci.h>
	11	#include <linux/spi/spi.h>
	12
	13	#include "spi-cavium.h"
	14
	15	#define DRV_NAME "spi-thunderx"
	16
	17	#define SYS_FREQ_DEFAULT 700000000 /* 700 Mhz */
	18
	19	static int thunderx_spi_probe(struct pci_dev *pdev,
	20	const struct pci_device_id *ent)
	21	{
	22	struct device *dev = &pdev->dev;
	23	struct spi_master *master;
	24	struct octeon_spi *p;
	25	int ret;
	26
	27	master = spi_alloc_master(dev, sizeof(struct octeon_spi));
	28	if (!master)
	29	return -ENOMEM;
	30
	31	p = spi_master_get_devdata(master);
	32
	33	ret = pcim_enable_device(pdev);
	34	if (ret)
	35	goto error;
	36
	37	ret = pci_request_regions(pdev, DRV_NAME);
	38	if (ret)
	39	goto error;
	40
	41	p->register_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
	42	if (!p->register_base) {
	43	ret = -EINVAL;
	44	goto error;
	45	}
	46
	47	p->regs.config = 0x1000;
	48	p->regs.status = 0x1008;
	49	p->regs.tx = 0x1010;
	50	p->regs.data = 0x1080;
	51
	52	p->clk = devm_clk_get(dev, NULL);
	53	if (IS_ERR(p->clk)) {
	54	ret = PTR_ERR(p->clk);
	55	goto error;
	56	}
	57
	58	ret = clk_prepare_enable(p->clk);
	59	if (ret)
	60	goto error;
	61
	62	p->sys_freq = clk_get_rate(p->clk);
	63	if (!p->sys_freq)
	64	p->sys_freq = SYS_FREQ_DEFAULT;
	65	dev_info(dev, "Set system clock to %u\n", p->sys_freq);
66
67	master->num_chipselect = 4;
68	master->mode_bits = SPI_CPHA \| SPI_CPOL \| SPI_CS_HIGH \|
69	SPI_LSB_FIRST \| SPI_3WIRE;
70	master->transfer_one_message = octeon_spi_transfer_one_message;
71	master->bits_per_word_mask = SPI_BPW_MASK(8);
72	master->max_speed_hz = OCTEON_SPI_MAX_CLOCK_HZ;
73	master->dev.of_node = pdev->dev.of_node;
74
75	pci_set_drvdata(pdev, master);
76
77	ret = devm_spi_register_master(dev, master);
78	if (ret)
79	goto error;
80
81	return 0;
82
83	error:
568852b7	84	clk_disable_unprepare(p->clk);
7347a6c7 JG	85	spi_master_put(master);
	86	return ret;
	87	}
	88
	89	static void thunderx_spi_remove(struct pci_dev *pdev)
	90	{
	91	struct spi_master *master = pci_get_drvdata(pdev);
	92	struct octeon_spi *p;
	93
	94	p = spi_master_get_devdata(master);
	95	if (!p)
	96	return;
	97
568852b7	98	clk_disable_unprepare(p->clk);
7347a6c7 JG	99	/* Put everything in a known state. */
	100	writeq(0, p->register_base + OCTEON_SPI_CFG(p));
	101	}
	102
	103	static const struct pci_device_id thunderx_spi_pci_id_table[] = {
	104	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa00b) },
	105	{ 0, }
	106	};
	107
	108	MODULE_DEVICE_TABLE(pci, thunderx_spi_pci_id_table);
	109
	110	static struct pci_driver thunderx_spi_driver = {
	111	.name = DRV_NAME,
	112	.id_table = thunderx_spi_pci_id_table,
	113	.probe = thunderx_spi_probe,
	114	.remove = thunderx_spi_remove,
	115	};
	116
	117	module_pci_driver(thunderx_spi_driver);
	118
	119	MODULE_DESCRIPTION("Cavium, Inc. ThunderX SPI bus driver");
	120	MODULE_AUTHOR("Jan Glauber");
	121	MODULE_LICENSE("GPL");