Commit | Line | Data |
---|---|---|
f8043872 CB |
1 | /* |
2 | * Driver for Broadcom BCM2835 SPI Controllers | |
3 | * | |
4 | * Copyright (C) 2012 Chris Boot | |
5 | * Copyright (C) 2013 Stephen Warren | |
6 | * | |
7 | * This driver is inspired by: | |
8 | * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> | |
9 | * spi-atmel.c, Copyright (C) 2006 Atmel Corporation | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License as published by | |
13 | * the Free Software Foundation; either version 2 of the License, or | |
14 | * (at your option) any later version. | |
15 | * | |
16 | * This program is distributed in the hope that it will be useful, | |
17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 | * GNU General Public License for more details. | |
f8043872 CB |
20 | */ |
21 | ||
22 | #include <linux/clk.h> | |
23 | #include <linux/completion.h> | |
24 | #include <linux/delay.h> | |
25 | #include <linux/err.h> | |
26 | #include <linux/interrupt.h> | |
27 | #include <linux/io.h> | |
28 | #include <linux/kernel.h> | |
29 | #include <linux/module.h> | |
30 | #include <linux/of.h> | |
31 | #include <linux/of_irq.h> | |
32 | #include <linux/of_device.h> | |
33 | #include <linux/spi/spi.h> | |
34 | ||
35 | /* SPI register offsets */ | |
36 | #define BCM2835_SPI_CS 0x00 | |
37 | #define BCM2835_SPI_FIFO 0x04 | |
38 | #define BCM2835_SPI_CLK 0x08 | |
39 | #define BCM2835_SPI_DLEN 0x0c | |
40 | #define BCM2835_SPI_LTOH 0x10 | |
41 | #define BCM2835_SPI_DC 0x14 | |
42 | ||
43 | /* Bitfields in CS */ | |
44 | #define BCM2835_SPI_CS_LEN_LONG 0x02000000 | |
45 | #define BCM2835_SPI_CS_DMA_LEN 0x01000000 | |
46 | #define BCM2835_SPI_CS_CSPOL2 0x00800000 | |
47 | #define BCM2835_SPI_CS_CSPOL1 0x00400000 | |
48 | #define BCM2835_SPI_CS_CSPOL0 0x00200000 | |
49 | #define BCM2835_SPI_CS_RXF 0x00100000 | |
50 | #define BCM2835_SPI_CS_RXR 0x00080000 | |
51 | #define BCM2835_SPI_CS_TXD 0x00040000 | |
52 | #define BCM2835_SPI_CS_RXD 0x00020000 | |
53 | #define BCM2835_SPI_CS_DONE 0x00010000 | |
54 | #define BCM2835_SPI_CS_LEN 0x00002000 | |
55 | #define BCM2835_SPI_CS_REN 0x00001000 | |
56 | #define BCM2835_SPI_CS_ADCS 0x00000800 | |
57 | #define BCM2835_SPI_CS_INTR 0x00000400 | |
58 | #define BCM2835_SPI_CS_INTD 0x00000200 | |
59 | #define BCM2835_SPI_CS_DMAEN 0x00000100 | |
60 | #define BCM2835_SPI_CS_TA 0x00000080 | |
61 | #define BCM2835_SPI_CS_CSPOL 0x00000040 | |
62 | #define BCM2835_SPI_CS_CLEAR_RX 0x00000020 | |
63 | #define BCM2835_SPI_CS_CLEAR_TX 0x00000010 | |
64 | #define BCM2835_SPI_CS_CPOL 0x00000008 | |
65 | #define BCM2835_SPI_CS_CPHA 0x00000004 | |
66 | #define BCM2835_SPI_CS_CS_10 0x00000002 | |
67 | #define BCM2835_SPI_CS_CS_01 0x00000001 | |
68 | ||
69 | #define BCM2835_SPI_TIMEOUT_MS 30000 | |
70 | #define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS) | |
71 | ||
72 | #define DRV_NAME "spi-bcm2835" | |
73 | ||
74 | struct bcm2835_spi { | |
75 | void __iomem *regs; | |
76 | struct clk *clk; | |
77 | int irq; | |
78 | struct completion done; | |
79 | const u8 *tx_buf; | |
80 | u8 *rx_buf; | |
81 | int len; | |
82 | }; | |
83 | ||
84 | static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg) | |
85 | { | |
86 | return readl(bs->regs + reg); | |
87 | } | |
88 | ||
89 | static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val) | |
90 | { | |
91 | writel(val, bs->regs + reg); | |
92 | } | |
93 | ||
4adf3129 | 94 | static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs) |
f8043872 CB |
95 | { |
96 | u8 byte; | |
97 | ||
4adf3129 | 98 | while (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_RXD) { |
f8043872 CB |
99 | byte = bcm2835_rd(bs, BCM2835_SPI_FIFO); |
100 | if (bs->rx_buf) | |
101 | *bs->rx_buf++ = byte; | |
102 | } | |
103 | } | |
104 | ||
4adf3129 | 105 | static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs) |
f8043872 CB |
106 | { |
107 | u8 byte; | |
108 | ||
4adf3129 MS |
109 | while ((bs->len) && |
110 | (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_TXD)) { | |
f8043872 CB |
111 | byte = bs->tx_buf ? *bs->tx_buf++ : 0; |
112 | bcm2835_wr(bs, BCM2835_SPI_FIFO, byte); | |
113 | bs->len--; | |
114 | } | |
115 | } | |
116 | ||
117 | static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id) | |
118 | { | |
119 | struct spi_master *master = dev_id; | |
120 | struct bcm2835_spi *bs = spi_master_get_devdata(master); | |
121 | u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); | |
122 | ||
4adf3129 MS |
123 | /* Read as many bytes as possible from FIFO */ |
124 | bcm2835_rd_fifo(bs); | |
f8043872 | 125 | |
4adf3129 MS |
126 | if (bs->len) { /* there is more data to transmit */ |
127 | bcm2835_wr_fifo(bs); | |
128 | } else { /* Transfer complete */ | |
129 | /* Disable SPI interrupts */ | |
130 | cs &= ~(BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD); | |
131 | bcm2835_wr(bs, BCM2835_SPI_CS, cs); | |
f8043872 CB |
132 | |
133 | /* | |
4adf3129 MS |
134 | * Wake up bcm2835_spi_transfer_one(), which will call |
135 | * bcm2835_spi_finish_transfer(), to drain the RX FIFO. | |
f8043872 | 136 | */ |
4adf3129 | 137 | complete(&bs->done); |
f8043872 CB |
138 | } |
139 | ||
4adf3129 | 140 | return IRQ_HANDLED; |
f8043872 CB |
141 | } |
142 | ||
f8043872 | 143 | static int bcm2835_spi_start_transfer(struct spi_device *spi, |
342f948a | 144 | struct spi_transfer *tfr) |
f8043872 CB |
145 | { |
146 | struct bcm2835_spi *bs = spi_master_get_devdata(spi->master); | |
147 | unsigned long spi_hz, clk_hz, cdiv; | |
148 | u32 cs = BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_TA; | |
149 | ||
150 | spi_hz = tfr->speed_hz; | |
151 | clk_hz = clk_get_rate(bs->clk); | |
152 | ||
153 | if (spi_hz >= clk_hz / 2) { | |
154 | cdiv = 2; /* clk_hz/2 is the fastest we can go */ | |
155 | } else if (spi_hz) { | |
210b4923 MS |
156 | /* CDIV must be a multiple of two */ |
157 | cdiv = DIV_ROUND_UP(clk_hz, spi_hz); | |
158 | cdiv += (cdiv % 2); | |
f8043872 CB |
159 | |
160 | if (cdiv >= 65536) | |
161 | cdiv = 0; /* 0 is the slowest we can go */ | |
342f948a | 162 | } else { |
f8043872 | 163 | cdiv = 0; /* 0 is the slowest we can go */ |
342f948a | 164 | } |
f8043872 CB |
165 | |
166 | if (spi->mode & SPI_CPOL) | |
167 | cs |= BCM2835_SPI_CS_CPOL; | |
168 | if (spi->mode & SPI_CPHA) | |
169 | cs |= BCM2835_SPI_CS_CPHA; | |
170 | ||
171 | if (!(spi->mode & SPI_NO_CS)) { | |
172 | if (spi->mode & SPI_CS_HIGH) { | |
173 | cs |= BCM2835_SPI_CS_CSPOL; | |
174 | cs |= BCM2835_SPI_CS_CSPOL0 << spi->chip_select; | |
175 | } | |
176 | ||
177 | cs |= spi->chip_select; | |
178 | } | |
179 | ||
16735d02 | 180 | reinit_completion(&bs->done); |
f8043872 CB |
181 | bs->tx_buf = tfr->tx_buf; |
182 | bs->rx_buf = tfr->rx_buf; | |
183 | bs->len = tfr->len; | |
184 | ||
185 | bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv); | |
186 | /* | |
187 | * Enable the HW block. This will immediately trigger a DONE (TX | |
188 | * empty) interrupt, upon which we will fill the TX FIFO with the | |
189 | * first TX bytes. Pre-filling the TX FIFO here to avoid the | |
190 | * interrupt doesn't work:-( | |
191 | */ | |
192 | bcm2835_wr(bs, BCM2835_SPI_CS, cs); | |
193 | ||
194 | return 0; | |
195 | } | |
196 | ||
197 | static int bcm2835_spi_finish_transfer(struct spi_device *spi, | |
342f948a MS |
198 | struct spi_transfer *tfr, |
199 | bool cs_change) | |
f8043872 CB |
200 | { |
201 | struct bcm2835_spi *bs = spi_master_get_devdata(spi->master); | |
202 | u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); | |
203 | ||
f8043872 CB |
204 | if (tfr->delay_usecs) |
205 | udelay(tfr->delay_usecs); | |
206 | ||
207 | if (cs_change) | |
208 | /* Clear TA flag */ | |
209 | bcm2835_wr(bs, BCM2835_SPI_CS, cs & ~BCM2835_SPI_CS_TA); | |
210 | ||
211 | return 0; | |
212 | } | |
213 | ||
f8043872 | 214 | static int bcm2835_spi_transfer_one(struct spi_master *master, |
342f948a | 215 | struct spi_message *mesg) |
f8043872 CB |
216 | { |
217 | struct bcm2835_spi *bs = spi_master_get_devdata(master); | |
218 | struct spi_transfer *tfr; | |
219 | struct spi_device *spi = mesg->spi; | |
220 | int err = 0; | |
221 | unsigned int timeout; | |
222 | bool cs_change; | |
223 | ||
224 | list_for_each_entry(tfr, &mesg->transfers, transfer_list) { | |
f8043872 CB |
225 | err = bcm2835_spi_start_transfer(spi, tfr); |
226 | if (err) | |
227 | goto out; | |
228 | ||
342f948a MS |
229 | timeout = wait_for_completion_timeout( |
230 | &bs->done, | |
231 | msecs_to_jiffies(BCM2835_SPI_TIMEOUT_MS) | |
232 | ); | |
f8043872 CB |
233 | if (!timeout) { |
234 | err = -ETIMEDOUT; | |
235 | goto out; | |
236 | } | |
237 | ||
238 | cs_change = tfr->cs_change || | |
239 | list_is_last(&tfr->transfer_list, &mesg->transfers); | |
240 | ||
241 | err = bcm2835_spi_finish_transfer(spi, tfr, cs_change); | |
242 | if (err) | |
243 | goto out; | |
244 | ||
245 | mesg->actual_length += (tfr->len - bs->len); | |
246 | } | |
247 | ||
248 | out: | |
249 | /* Clear FIFOs, and disable the HW block */ | |
250 | bcm2835_wr(bs, BCM2835_SPI_CS, | |
251 | BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); | |
252 | mesg->status = err; | |
253 | spi_finalize_current_message(master); | |
254 | ||
255 | return 0; | |
256 | } | |
257 | ||
258 | static int bcm2835_spi_probe(struct platform_device *pdev) | |
259 | { | |
260 | struct spi_master *master; | |
261 | struct bcm2835_spi *bs; | |
262 | struct resource *res; | |
263 | int err; | |
264 | ||
265 | master = spi_alloc_master(&pdev->dev, sizeof(*bs)); | |
266 | if (!master) { | |
267 | dev_err(&pdev->dev, "spi_alloc_master() failed\n"); | |
268 | return -ENOMEM; | |
269 | } | |
270 | ||
271 | platform_set_drvdata(pdev, master); | |
272 | ||
273 | master->mode_bits = BCM2835_SPI_MODE_BITS; | |
c2b6a3a8 | 274 | master->bits_per_word_mask = SPI_BPW_MASK(8); |
f8043872 | 275 | master->num_chipselect = 3; |
f8043872 CB |
276 | master->transfer_one_message = bcm2835_spi_transfer_one; |
277 | master->dev.of_node = pdev->dev.of_node; | |
278 | ||
279 | bs = spi_master_get_devdata(master); | |
280 | ||
281 | init_completion(&bs->done); | |
282 | ||
283 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
2d6e75e8 LN |
284 | bs->regs = devm_ioremap_resource(&pdev->dev, res); |
285 | if (IS_ERR(bs->regs)) { | |
286 | err = PTR_ERR(bs->regs); | |
f8043872 CB |
287 | goto out_master_put; |
288 | } | |
289 | ||
290 | bs->clk = devm_clk_get(&pdev->dev, NULL); | |
291 | if (IS_ERR(bs->clk)) { | |
292 | err = PTR_ERR(bs->clk); | |
293 | dev_err(&pdev->dev, "could not get clk: %d\n", err); | |
294 | goto out_master_put; | |
295 | } | |
296 | ||
297 | bs->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); | |
298 | if (bs->irq <= 0) { | |
299 | dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq); | |
300 | err = bs->irq ? bs->irq : -ENODEV; | |
301 | goto out_master_put; | |
302 | } | |
303 | ||
304 | clk_prepare_enable(bs->clk); | |
305 | ||
08bc0544 | 306 | err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0, |
342f948a | 307 | dev_name(&pdev->dev), master); |
f8043872 CB |
308 | if (err) { |
309 | dev_err(&pdev->dev, "could not request IRQ: %d\n", err); | |
310 | goto out_clk_disable; | |
311 | } | |
312 | ||
313 | /* initialise the hardware */ | |
314 | bcm2835_wr(bs, BCM2835_SPI_CS, | |
315 | BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); | |
316 | ||
247263db | 317 | err = devm_spi_register_master(&pdev->dev, master); |
f8043872 CB |
318 | if (err) { |
319 | dev_err(&pdev->dev, "could not register SPI master: %d\n", err); | |
08bc0544 | 320 | goto out_clk_disable; |
f8043872 CB |
321 | } |
322 | ||
323 | return 0; | |
324 | ||
f8043872 CB |
325 | out_clk_disable: |
326 | clk_disable_unprepare(bs->clk); | |
327 | out_master_put: | |
328 | spi_master_put(master); | |
329 | return err; | |
330 | } | |
331 | ||
332 | static int bcm2835_spi_remove(struct platform_device *pdev) | |
333 | { | |
e0b35b89 | 334 | struct spi_master *master = platform_get_drvdata(pdev); |
f8043872 CB |
335 | struct bcm2835_spi *bs = spi_master_get_devdata(master); |
336 | ||
f8043872 CB |
337 | /* Clear FIFOs, and disable the HW block */ |
338 | bcm2835_wr(bs, BCM2835_SPI_CS, | |
339 | BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); | |
340 | ||
341 | clk_disable_unprepare(bs->clk); | |
f8043872 CB |
342 | |
343 | return 0; | |
344 | } | |
345 | ||
346 | static const struct of_device_id bcm2835_spi_match[] = { | |
347 | { .compatible = "brcm,bcm2835-spi", }, | |
348 | {} | |
349 | }; | |
350 | MODULE_DEVICE_TABLE(of, bcm2835_spi_match); | |
351 | ||
352 | static struct platform_driver bcm2835_spi_driver = { | |
353 | .driver = { | |
354 | .name = DRV_NAME, | |
f8043872 CB |
355 | .of_match_table = bcm2835_spi_match, |
356 | }, | |
357 | .probe = bcm2835_spi_probe, | |
358 | .remove = bcm2835_spi_remove, | |
359 | }; | |
360 | module_platform_driver(bcm2835_spi_driver); | |
361 | ||
362 | MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2835"); | |
363 | MODULE_AUTHOR("Chris Boot <bootc@bootc.net>"); | |
364 | MODULE_LICENSE("GPL v2"); |