[linux-2.6-block.git] / drivers / spi / spi-at91-usart.c

// SPDX-License-Identifier: GPL-2.0
//
// Driver for AT91 USART Controllers as SPI
//
// Copyright (C) 2018 Microchip Technology Inc.
//
// Author: Radu Pirea <radu.pirea@microchip.com>

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/gpio/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>

#include <linux/spi/spi.h>

#define US_CR			0x00
#define US_MR			0x04
#define US_IER			0x08
#define US_IDR			0x0C
#define US_CSR			0x14
#define US_RHR			0x18
#define US_THR			0x1C
#define US_BRGR			0x20
#define US_VERSION		0xFC

#define US_CR_RSTRX		BIT(2)
#define US_CR_RSTTX		BIT(3)
#define US_CR_RXEN		BIT(4)
#define US_CR_RXDIS		BIT(5)
#define US_CR_TXEN		BIT(6)
#define US_CR_TXDIS		BIT(7)

#define US_MR_SPI_HOST		0x0E
#define US_MR_CHRL		GENMASK(7, 6)
#define US_MR_CPHA		BIT(8)
#define US_MR_CPOL		BIT(16)
#define US_MR_CLKO		BIT(18)
#define US_MR_WRDBT		BIT(20)
#define US_MR_LOOP		BIT(15)

#define US_IR_RXRDY		BIT(0)
#define US_IR_TXRDY		BIT(1)
#define US_IR_OVRE		BIT(5)

#define US_BRGR_SIZE		BIT(16)

#define US_MIN_CLK_DIV		0x06
#define US_MAX_CLK_DIV		BIT(16)

#define US_RESET		(US_CR_RSTRX | US_CR_RSTTX)
#define US_DISABLE		(US_CR_RXDIS | US_CR_TXDIS)
#define US_ENABLE		(US_CR_RXEN | US_CR_TXEN)
#define US_OVRE_RXRDY_IRQS	(US_IR_OVRE | US_IR_RXRDY)

#define US_INIT \
	(US_MR_SPI_HOST | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
#define US_DMA_MIN_BYTES       16
#define US_DMA_TIMEOUT         (msecs_to_jiffies(1000))

/* Register access macros */
#define at91_usart_spi_readl(port, reg) \
	readl_relaxed((port)->regs + US_##reg)
#define at91_usart_spi_writel(port, reg, value) \
	writel_relaxed((value), (port)->regs + US_##reg)

#define at91_usart_spi_readb(port, reg) \
	readb_relaxed((port)->regs + US_##reg)
#define at91_usart_spi_writeb(port, reg, value) \
	writeb_relaxed((value), (port)->regs + US_##reg)

struct at91_usart_spi {
	struct platform_device  *mpdev;
	struct spi_transfer	*current_transfer;
	void __iomem		*regs;
	struct device		*dev;
	struct clk		*clk;

	struct completion	xfer_completion;

	/*used in interrupt to protect data reading*/
	spinlock_t		lock;

	phys_addr_t		phybase;

	int			irq;
	unsigned int		current_tx_remaining_bytes;
	unsigned int		current_rx_remaining_bytes;

	u32			spi_clk;
	u32			status;

	bool			xfer_failed;
	bool			use_dma;
};

static void dma_callback(void *data)
{
	struct spi_controller   *ctlr = data;
	struct at91_usart_spi   *aus = spi_controller_get_devdata(ctlr);

	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
	aus->current_rx_remaining_bytes = 0;
	complete(&aus->xfer_completion);
}

static bool at91_usart_spi_can_dma(struct spi_controller *ctrl,
				   struct spi_device *spi,
				   struct spi_transfer *xfer)
{
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);

	return aus->use_dma && xfer->len >= US_DMA_MIN_BYTES;
}

static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
					struct at91_usart_spi *aus)
{
	struct dma_slave_config slave_config;
	struct device *dev = &aus->mpdev->dev;
	phys_addr_t phybase = aus->phybase;
	dma_cap_mask_t mask;
	int err = 0;

	dma_cap_zero(mask);
	dma_cap_set(DMA_SLAVE, mask);

	ctlr->dma_tx = dma_request_chan(dev, "tx");
	if (IS_ERR_OR_NULL(ctlr->dma_tx)) {
		if (IS_ERR(ctlr->dma_tx)) {
			err = PTR_ERR(ctlr->dma_tx);
			goto at91_usart_spi_error_clear;
		}

		dev_dbg(dev,
			"DMA TX channel not available, SPI unable to use DMA\n");
		err = -EBUSY;
		goto at91_usart_spi_error_clear;
	}

	ctlr->dma_rx = dma_request_chan(dev, "rx");
	if (IS_ERR_OR_NULL(ctlr->dma_rx)) {
		if (IS_ERR(ctlr->dma_rx)) {
			err = PTR_ERR(ctlr->dma_rx);
			goto at91_usart_spi_error;
		}

		dev_dbg(dev,
			"DMA RX channel not available, SPI unable to use DMA\n");
		err = -EBUSY;
		goto at91_usart_spi_error;
	}

	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
	slave_config.dst_addr = (dma_addr_t)phybase + US_THR;
	slave_config.src_addr = (dma_addr_t)phybase + US_RHR;
	slave_config.src_maxburst = 1;
	slave_config.dst_maxburst = 1;
	slave_config.device_fc = false;

	slave_config.direction = DMA_DEV_TO_MEM;
	if (dmaengine_slave_config(ctlr->dma_rx, &slave_config)) {
		dev_err(&ctlr->dev,
			"failed to configure rx dma channel\n");
		err = -EINVAL;
		goto at91_usart_spi_error;
	}

	slave_config.direction = DMA_MEM_TO_DEV;
	if (dmaengine_slave_config(ctlr->dma_tx, &slave_config)) {
		dev_err(&ctlr->dev,
			"failed to configure tx dma channel\n");
		err = -EINVAL;
		goto at91_usart_spi_error;
	}

	aus->use_dma = true;
	return 0;

at91_usart_spi_error:
	if (!IS_ERR_OR_NULL(ctlr->dma_tx))
		dma_release_channel(ctlr->dma_tx);
	if (!IS_ERR_OR_NULL(ctlr->dma_rx))
		dma_release_channel(ctlr->dma_rx);
	ctlr->dma_tx = NULL;
	ctlr->dma_rx = NULL;

at91_usart_spi_error_clear:
	return err;
}

static void at91_usart_spi_release_dma(struct spi_controller *ctlr)
{
	if (ctlr->dma_rx)
		dma_release_channel(ctlr->dma_rx);
	if (ctlr->dma_tx)
		dma_release_channel(ctlr->dma_tx);
}

static void at91_usart_spi_stop_dma(struct spi_controller *ctlr)
{
	if (ctlr->dma_rx)
		dmaengine_terminate_all(ctlr->dma_rx);
	if (ctlr->dma_tx)
		dmaengine_terminate_all(ctlr->dma_tx);
}

static int at91_usart_spi_dma_transfer(struct spi_controller *ctlr,
				       struct spi_transfer *xfer)
{
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
	struct dma_chan	 *rxchan = ctlr->dma_rx;
	struct dma_chan *txchan = ctlr->dma_tx;
	struct dma_async_tx_descriptor *rxdesc;
	struct dma_async_tx_descriptor *txdesc;
	dma_cookie_t cookie;

	/* Disable RX interrupt */
	at91_usart_spi_writel(aus, IDR, US_IR_RXRDY);

	rxdesc = dmaengine_prep_slave_sg(rxchan,
					 xfer->rx_sg.sgl,
					 xfer->rx_sg.nents,
					 DMA_DEV_TO_MEM,
					 DMA_PREP_INTERRUPT |
					 DMA_CTRL_ACK);
	if (!rxdesc)
		goto at91_usart_spi_err_dma;

	txdesc = dmaengine_prep_slave_sg(txchan,
					 xfer->tx_sg.sgl,
					 xfer->tx_sg.nents,
					 DMA_MEM_TO_DEV,
					 DMA_PREP_INTERRUPT |
					 DMA_CTRL_ACK);
	if (!txdesc)
		goto at91_usart_spi_err_dma;

	rxdesc->callback = dma_callback;
	rxdesc->callback_param = ctlr;

	cookie = rxdesc->tx_submit(rxdesc);
	if (dma_submit_error(cookie))
		goto at91_usart_spi_err_dma;

	cookie = txdesc->tx_submit(txdesc);
	if (dma_submit_error(cookie))
		goto at91_usart_spi_err_dma;

	rxchan->device->device_issue_pending(rxchan);
	txchan->device->device_issue_pending(txchan);

	return 0;

at91_usart_spi_err_dma:
	/* Enable RX interrupt if something fails and fallback to PIO */
	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
	at91_usart_spi_stop_dma(ctlr);

	return -ENOMEM;
}

static unsigned long at91_usart_spi_dma_timeout(struct at91_usart_spi *aus)
{
	return wait_for_completion_timeout(&aus->xfer_completion,
					   US_DMA_TIMEOUT);
}

static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
{
	return aus->status & US_IR_TXRDY;
}

static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
{
	return aus->status & US_IR_RXRDY;
}

static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
{
	return aus->status & US_IR_OVRE;
}

static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
{
	aus->status = at91_usart_spi_readl(aus, CSR);
	return aus->status;
}

static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
{
	unsigned int len = aus->current_transfer->len;
	unsigned int remaining = aus->current_tx_remaining_bytes;
	const u8  *tx_buf = aus->current_transfer->tx_buf;

	if (!remaining)
		return;

	if (at91_usart_spi_tx_ready(aus)) {
		at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
		aus->current_tx_remaining_bytes--;
	}
}

static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
{
	int len = aus->current_transfer->len;
	int remaining = aus->current_rx_remaining_bytes;
	u8  *rx_buf = aus->current_transfer->rx_buf;

	if (!remaining)
		return;

	rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
	aus->current_rx_remaining_bytes--;
}

static inline void
at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
			      struct spi_transfer *xfer)
{
	at91_usart_spi_writel(aus, BRGR,
			      DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
}

static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
{
	struct spi_controller *controller = dev_id;
	struct at91_usart_spi *aus = spi_controller_get_devdata(controller);

	spin_lock(&aus->lock);
	at91_usart_spi_read_status(aus);

	if (at91_usart_spi_check_overrun(aus)) {
		aus->xfer_failed = true;
		at91_usart_spi_writel(aus, IDR, US_IR_OVRE | US_IR_RXRDY);
		spin_unlock(&aus->lock);
		return IRQ_HANDLED;
	}

	if (at91_usart_spi_rx_ready(aus)) {
		at91_usart_spi_rx(aus);
		spin_unlock(&aus->lock);
		return IRQ_HANDLED;
	}

	spin_unlock(&aus->lock);

	return IRQ_NONE;
}

static int at91_usart_spi_setup(struct spi_device *spi)
{
	struct at91_usart_spi *aus = spi_controller_get_devdata(spi->controller);
	u32 *ausd = spi->controller_state;
	unsigned int mr = at91_usart_spi_readl(aus, MR);

	if (spi->mode & SPI_CPOL)
		mr |= US_MR_CPOL;
	else
		mr &= ~US_MR_CPOL;

	if (spi->mode & SPI_CPHA)
		mr |= US_MR_CPHA;
	else
		mr &= ~US_MR_CPHA;

	if (spi->mode & SPI_LOOP)
		mr |= US_MR_LOOP;
	else
		mr &= ~US_MR_LOOP;

	if (!ausd) {
		ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
		if (!ausd)
			return -ENOMEM;

		spi->controller_state = ausd;
	}

	*ausd = mr;

	dev_dbg(&spi->dev,
		"setup: bpw %u mode 0x%x -> mr %d %08x\n",
		spi->bits_per_word, spi->mode, spi_get_chipselect(spi, 0), mr);

	return 0;
}

static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
				       struct spi_device *spi,
				       struct spi_transfer *xfer)
{
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
	unsigned long dma_timeout = 0;
	int ret = 0;

	at91_usart_spi_set_xfer_speed(aus, xfer);
	aus->xfer_failed = false;
	aus->current_transfer = xfer;
	aus->current_tx_remaining_bytes = xfer->len;
	aus->current_rx_remaining_bytes = xfer->len;

	while ((aus->current_tx_remaining_bytes ||
		aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
		reinit_completion(&aus->xfer_completion);
		if (at91_usart_spi_can_dma(ctlr, spi, xfer) &&
		    !ret) {
			ret = at91_usart_spi_dma_transfer(ctlr, xfer);
			if (ret)
				continue;

			dma_timeout = at91_usart_spi_dma_timeout(aus);

			if (WARN_ON(dma_timeout == 0)) {
				dev_err(&spi->dev, "DMA transfer timeout\n");
				return -EIO;
			}
			aus->current_tx_remaining_bytes = 0;
		} else {
			at91_usart_spi_read_status(aus);
			at91_usart_spi_tx(aus);
		}

		cpu_relax();
	}

	if (aus->xfer_failed) {
		dev_err(aus->dev, "Overrun!\n");
		return -EIO;
	}

	return 0;
}

static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
					  struct spi_message *message)
{
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
	struct spi_device *spi = message->spi;
	u32 *ausd = spi->controller_state;

	at91_usart_spi_writel(aus, CR, US_ENABLE);
	at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
	at91_usart_spi_writel(aus, MR, *ausd);

	return 0;
}

static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
					    struct spi_message *message)
{
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);

	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
	at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);

	return 0;
}

static void at91_usart_spi_cleanup(struct spi_device *spi)
{
	struct at91_usart_spi_device *ausd = spi->controller_state;

	spi->controller_state = NULL;
	kfree(ausd);
}

static void at91_usart_spi_init(struct at91_usart_spi *aus)
{
	at91_usart_spi_writel(aus, MR, US_INIT);
	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
}

static int at91_usart_gpio_setup(struct platform_device *pdev)
{
	struct gpio_descs *cs_gpios;

	cs_gpios = devm_gpiod_get_array_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);

	if (IS_ERR(cs_gpios))
		return PTR_ERR(cs_gpios);

	return 0;
}

static int at91_usart_spi_probe(struct platform_device *pdev)
{
	struct resource *regs;
	struct spi_controller *controller;
	struct at91_usart_spi *aus;
	struct clk *clk;
	int irq;
	int ret;

	regs = platform_get_resource(to_platform_device(pdev->dev.parent),
				     IORESOURCE_MEM, 0);
	if (!regs)
		return -EINVAL;

	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
	if (irq < 0)
		return irq;

	clk = devm_clk_get(pdev->dev.parent, "usart");
	if (IS_ERR(clk))
		return PTR_ERR(clk);

	ret = -ENOMEM;
	controller = spi_alloc_host(&pdev->dev, sizeof(*aus));
	if (!controller)
		goto at91_usart_spi_probe_fail;

	ret = at91_usart_gpio_setup(pdev);
	if (ret)
		goto at91_usart_spi_probe_fail;

	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
	controller->dev.of_node = pdev->dev.parent->of_node;
	controller->bits_per_word_mask = SPI_BPW_MASK(8);
	controller->setup = at91_usart_spi_setup;
	controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
	controller->transfer_one = at91_usart_spi_transfer_one;
	controller->prepare_message = at91_usart_spi_prepare_message;
	controller->unprepare_message = at91_usart_spi_unprepare_message;
	controller->can_dma = at91_usart_spi_can_dma;
	controller->cleanup = at91_usart_spi_cleanup;
	controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
						US_MIN_CLK_DIV);
	controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
						US_MAX_CLK_DIV);
	platform_set_drvdata(pdev, controller);

	aus = spi_controller_get_devdata(controller);

	aus->dev = &pdev->dev;
	aus->regs = devm_ioremap_resource(&pdev->dev, regs);
	if (IS_ERR(aus->regs)) {
		ret = PTR_ERR(aus->regs);
		goto at91_usart_spi_probe_fail;
	}

	aus->irq = irq;
	aus->clk = clk;

	ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
			       dev_name(&pdev->dev), controller);
	if (ret)
		goto at91_usart_spi_probe_fail;

	ret = clk_prepare_enable(clk);
	if (ret)
		goto at91_usart_spi_probe_fail;

	aus->spi_clk = clk_get_rate(clk);
	at91_usart_spi_init(aus);

	aus->phybase = regs->start;

	aus->mpdev = to_platform_device(pdev->dev.parent);

	ret = at91_usart_spi_configure_dma(controller, aus);
	if (ret)
		goto at91_usart_fail_dma;

	spin_lock_init(&aus->lock);
	init_completion(&aus->xfer_completion);

	ret = devm_spi_register_controller(&pdev->dev, controller);
	if (ret)
		goto at91_usart_fail_register_controller;

	dev_info(&pdev->dev,
		 "AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
		 at91_usart_spi_readl(aus, VERSION),
		 &regs->start, irq);

	return 0;

at91_usart_fail_register_controller:
	at91_usart_spi_release_dma(controller);
at91_usart_fail_dma:
	clk_disable_unprepare(clk);
at91_usart_spi_probe_fail:
	spi_controller_put(controller);
	return ret;
}

__maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
{
	struct spi_controller *ctlr = dev_get_drvdata(dev);
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);

	clk_disable_unprepare(aus->clk);
	pinctrl_pm_select_sleep_state(dev);

	return 0;
}

__maybe_unused static int at91_usart_spi_runtime_resume(struct device *dev)
{
	struct spi_controller *ctrl = dev_get_drvdata(dev);
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);

	pinctrl_pm_select_default_state(dev);

	return clk_prepare_enable(aus->clk);
}

__maybe_unused static int at91_usart_spi_suspend(struct device *dev)
{
	struct spi_controller *ctrl = dev_get_drvdata(dev);
	int ret;

	ret = spi_controller_suspend(ctrl);
	if (ret)
		return ret;

	if (!pm_runtime_suspended(dev))
		at91_usart_spi_runtime_suspend(dev);

	return 0;
}

__maybe_unused static int at91_usart_spi_resume(struct device *dev)
{
	struct spi_controller *ctrl = dev_get_drvdata(dev);
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
	int ret;

	if (!pm_runtime_suspended(dev)) {
		ret = at91_usart_spi_runtime_resume(dev);
		if (ret)
			return ret;
	}

	at91_usart_spi_init(aus);

	return spi_controller_resume(ctrl);
}

static void at91_usart_spi_remove(struct platform_device *pdev)
{
	struct spi_controller *ctlr = platform_get_drvdata(pdev);
	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);

	at91_usart_spi_release_dma(ctlr);
	clk_disable_unprepare(aus->clk);
}

static const struct dev_pm_ops at91_usart_spi_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(at91_usart_spi_suspend, at91_usart_spi_resume)
	SET_RUNTIME_PM_OPS(at91_usart_spi_runtime_suspend,
			   at91_usart_spi_runtime_resume, NULL)
};

static struct platform_driver at91_usart_spi_driver = {
	.driver = {
		.name = "at91_usart_spi",
		.pm = &at91_usart_spi_pm_ops,
	},
	.probe = at91_usart_spi_probe,
	.remove_new = at91_usart_spi_remove,
};

module_platform_driver(at91_usart_spi_driver);

MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:at91_usart_spi");
Commit	Line	Data
e1892546 RP	1	// SPDX-License-Identifier: GPL-2.0
	2	//
	3	// Driver for AT91 USART Controllers as SPI
	4	//
	5	// Copyright (C) 2018 Microchip Technology Inc.
	6	//
	7	// Author: Radu Pirea <radu.pirea@microchip.com>
	8
	9	#include <linux/clk.h>
	10	#include <linux/delay.h>
c3fdefc2 RP	11	#include <linux/dmaengine.h>
c3fdefc2 RP	12	#include <linux/dma-direction.h>
e1892546 RP	13	#include <linux/interrupt.h>
	14	#include <linux/kernel.h>
	15	#include <linux/module.h>
c3fdefc2	16	#include <linux/of_platform.h>
3340ec49	17	#include <linux/gpio/consumer.h>
c2b142cc	18	#include <linux/pinctrl/consumer.h>
e1892546	19	#include <linux/platform_device.h>
96ed3ecd	20	#include <linux/pm_runtime.h>
e1892546 RP	21
	22	#include <linux/spi/spi.h>
	23
	24	#define US_CR 0x00
	25	#define US_MR 0x04
	26	#define US_IER 0x08
	27	#define US_IDR 0x0C
	28	#define US_CSR 0x14
	29	#define US_RHR 0x18
	30	#define US_THR 0x1C
	31	#define US_BRGR 0x20
	32	#define US_VERSION 0xFC
	33
	34	#define US_CR_RSTRX BIT(2)
	35	#define US_CR_RSTTX BIT(3)
	36	#define US_CR_RXEN BIT(4)
	37	#define US_CR_RXDIS BIT(5)
	38	#define US_CR_TXEN BIT(6)
	39	#define US_CR_TXDIS BIT(7)
	40
747d4e2c	41	#define US_MR_SPI_HOST 0x0E
e1892546 RP	42	#define US_MR_CHRL GENMASK(7, 6)
	43	#define US_MR_CPHA BIT(8)
	44	#define US_MR_CPOL BIT(16)
	45	#define US_MR_CLKO BIT(18)
	46	#define US_MR_WRDBT BIT(20)
	47	#define US_MR_LOOP BIT(15)
	48
	49	#define US_IR_RXRDY BIT(0)
	50	#define US_IR_TXRDY BIT(1)
	51	#define US_IR_OVRE BIT(5)
	52
	53	#define US_BRGR_SIZE BIT(16)
	54
	55	#define US_MIN_CLK_DIV 0x06
	56	#define US_MAX_CLK_DIV BIT(16)
	57
	58	#define US_RESET (US_CR_RSTRX \| US_CR_RSTTX)
	59	#define US_DISABLE (US_CR_RXDIS \| US_CR_TXDIS)
	60	#define US_ENABLE (US_CR_RXEN \| US_CR_TXEN)
	61	#define US_OVRE_RXRDY_IRQS (US_IR_OVRE \| US_IR_RXRDY)
	62
	63	#define US_INIT \
747d4e2c	64	(US_MR_SPI_HOST \| US_MR_CHRL \| US_MR_CLKO \| US_MR_WRDBT)
c3fdefc2 RP	65	#define US_DMA_MIN_BYTES 16
c3fdefc2 RP	66	#define US_DMA_TIMEOUT (msecs_to_jiffies(1000))
e1892546 RP	67
	68	/* Register access macros */
	69	#define at91_usart_spi_readl(port, reg) \
	70	readl_relaxed((port)->regs + US_##reg)
	71	#define at91_usart_spi_writel(port, reg, value) \
	72	writel_relaxed((value), (port)->regs + US_##reg)
	73
	74	#define at91_usart_spi_readb(port, reg) \
	75	readb_relaxed((port)->regs + US_##reg)
	76	#define at91_usart_spi_writeb(port, reg, value) \
	77	writeb_relaxed((value), (port)->regs + US_##reg)
	78
	79	struct at91_usart_spi {
c3fdefc2	80	struct platform_device *mpdev;
e1892546 RP	81	struct spi_transfer *current_transfer;
	82	void __iomem *regs;
	83	struct device *dev;
	84	struct clk *clk;
	85
c3fdefc2 RP	86	struct completion xfer_completion;
c3fdefc2 RP	87
e1892546 RP	88	/used in interrupt to protect data reading/
	89	spinlock_t lock;
	90
c3fdefc2 RP	91	phys_addr_t phybase;
c3fdefc2 RP	92
e1892546 RP	93	int irq;
	94	unsigned int current_tx_remaining_bytes;
	95	unsigned int current_rx_remaining_bytes;
	96
	97	u32 spi_clk;
	98	u32 status;
	99
	100	bool xfer_failed;
c3fdefc2	101	bool use_dma;
e1892546 RP	102	};
e1892546 RP	103
c3fdefc2 RP	104	static void dma_callback(void *data)
	105	{
	106	struct spi_controller *ctlr = data;
747d4e2c	107	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
c3fdefc2 RP	108
	109	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
	110	aus->current_rx_remaining_bytes = 0;
	111	complete(&aus->xfer_completion);
	112	}
	113
	114	static bool at91_usart_spi_can_dma(struct spi_controller *ctrl,
	115	struct spi_device *spi,
	116	struct spi_transfer *xfer)
	117	{
747d4e2c	118	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
c3fdefc2 RP	119
	120	return aus->use_dma && xfer->len >= US_DMA_MIN_BYTES;
	121	}
	122
	123	static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
	124	struct at91_usart_spi *aus)
	125	{
	126	struct dma_slave_config slave_config;
	127	struct device *dev = &aus->mpdev->dev;
	128	phys_addr_t phybase = aus->phybase;
	129	dma_cap_mask_t mask;
	130	int err = 0;
	131
	132	dma_cap_zero(mask);
	133	dma_cap_set(DMA_SLAVE, mask);
	134
cef76e5a	135	ctlr->dma_tx = dma_request_chan(dev, "tx");
c3fdefc2 RP	136	if (IS_ERR_OR_NULL(ctlr->dma_tx)) {
	137	if (IS_ERR(ctlr->dma_tx)) {
	138	err = PTR_ERR(ctlr->dma_tx);
	139	goto at91_usart_spi_error_clear;
	140	}
	141
	142	dev_dbg(dev,
	143	"DMA TX channel not available, SPI unable to use DMA\n");
	144	err = -EBUSY;
	145	goto at91_usart_spi_error_clear;
	146	}
	147
cef76e5a	148	ctlr->dma_rx = dma_request_chan(dev, "rx");
c3fdefc2 RP	149	if (IS_ERR_OR_NULL(ctlr->dma_rx)) {
	150	if (IS_ERR(ctlr->dma_rx)) {
	151	err = PTR_ERR(ctlr->dma_rx);
	152	goto at91_usart_spi_error;
	153	}
	154
	155	dev_dbg(dev,
	156	"DMA RX channel not available, SPI unable to use DMA\n");
	157	err = -EBUSY;
	158	goto at91_usart_spi_error;
	159	}
	160
	161	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
	162	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
	163	slave_config.dst_addr = (dma_addr_t)phybase + US_THR;
	164	slave_config.src_addr = (dma_addr_t)phybase + US_RHR;
	165	slave_config.src_maxburst = 1;
	166	slave_config.dst_maxburst = 1;
	167	slave_config.device_fc = false;
	168
	169	slave_config.direction = DMA_DEV_TO_MEM;
	170	if (dmaengine_slave_config(ctlr->dma_rx, &slave_config)) {
	171	dev_err(&ctlr->dev,
	172	"failed to configure rx dma channel\n");
	173	err = -EINVAL;
	174	goto at91_usart_spi_error;
	175	}
	176
	177	slave_config.direction = DMA_MEM_TO_DEV;
	178	if (dmaengine_slave_config(ctlr->dma_tx, &slave_config)) {
	179	dev_err(&ctlr->dev,
	180	"failed to configure tx dma channel\n");
	181	err = -EINVAL;
	182	goto at91_usart_spi_error;
	183	}
	184
	185	aus->use_dma = true;
	186	return 0;
	187
	188	at91_usart_spi_error:
	189	if (!IS_ERR_OR_NULL(ctlr->dma_tx))
	190	dma_release_channel(ctlr->dma_tx);
	191	if (!IS_ERR_OR_NULL(ctlr->dma_rx))
	192	dma_release_channel(ctlr->dma_rx);
	193	ctlr->dma_tx = NULL;
	194	ctlr->dma_rx = NULL;
	195
	196	at91_usart_spi_error_clear:
	197	return err;
	198	}
	199
	200	static void at91_usart_spi_release_dma(struct spi_controller *ctlr)
	201	{
	202	if (ctlr->dma_rx)
	203	dma_release_channel(ctlr->dma_rx);
	204	if (ctlr->dma_tx)
	205	dma_release_channel(ctlr->dma_tx);
	206	}
	207
	208	static void at91_usart_spi_stop_dma(struct spi_controller *ctlr)
	209	{
	210	if (ctlr->dma_rx)
	211	dmaengine_terminate_all(ctlr->dma_rx);
	212	if (ctlr->dma_tx)
213	dmaengine_terminate_all(ctlr->dma_tx);
214	}
215
216	static int at91_usart_spi_dma_transfer(struct spi_controller *ctlr,
217	struct spi_transfer *xfer)
218	{
747d4e2c	219	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
c3fdefc2 RP	220	struct dma_chan *rxchan = ctlr->dma_rx;
	221	struct dma_chan *txchan = ctlr->dma_tx;
	222	struct dma_async_tx_descriptor *rxdesc;
	223	struct dma_async_tx_descriptor *txdesc;
	224	dma_cookie_t cookie;
	225
	226	/* Disable RX interrupt */
	227	at91_usart_spi_writel(aus, IDR, US_IR_RXRDY);
	228
	229	rxdesc = dmaengine_prep_slave_sg(rxchan,
	230	xfer->rx_sg.sgl,
	231	xfer->rx_sg.nents,
	232	DMA_DEV_TO_MEM,
	233	DMA_PREP_INTERRUPT \|
	234	DMA_CTRL_ACK);
	235	if (!rxdesc)
	236	goto at91_usart_spi_err_dma;
	237
	238	txdesc = dmaengine_prep_slave_sg(txchan,
	239	xfer->tx_sg.sgl,
	240	xfer->tx_sg.nents,
	241	DMA_MEM_TO_DEV,
	242	DMA_PREP_INTERRUPT \|
	243	DMA_CTRL_ACK);
	244	if (!txdesc)
	245	goto at91_usart_spi_err_dma;
	246
	247	rxdesc->callback = dma_callback;
	248	rxdesc->callback_param = ctlr;
	249
	250	cookie = rxdesc->tx_submit(rxdesc);
	251	if (dma_submit_error(cookie))
	252	goto at91_usart_spi_err_dma;
	253
	254	cookie = txdesc->tx_submit(txdesc);
	255	if (dma_submit_error(cookie))
	256	goto at91_usart_spi_err_dma;
	257
	258	rxchan->device->device_issue_pending(rxchan);
	259	txchan->device->device_issue_pending(txchan);
	260
	261	return 0;
	262
	263	at91_usart_spi_err_dma:
	264	/* Enable RX interrupt if something fails and fallback to PIO */
	265	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
	266	at91_usart_spi_stop_dma(ctlr);
	267
	268	return -ENOMEM;
	269	}
	270
	271	static unsigned long at91_usart_spi_dma_timeout(struct at91_usart_spi *aus)
	272	{
	273	return wait_for_completion_timeout(&aus->xfer_completion,
	274	US_DMA_TIMEOUT);
	275	}
	276
e1892546 RP	277	static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
	278	{
	279	return aus->status & US_IR_TXRDY;
	280	}
	281
	282	static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
	283	{
	284	return aus->status & US_IR_RXRDY;
	285	}
	286
	287	static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
	288	{
	289	return aus->status & US_IR_OVRE;
	290	}
	291
	292	static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
	293	{
	294	aus->status = at91_usart_spi_readl(aus, CSR);
	295	return aus->status;
	296	}
	297
	298	static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
	299	{
	300	unsigned int len = aus->current_transfer->len;
	301	unsigned int remaining = aus->current_tx_remaining_bytes;
	302	const u8 *tx_buf = aus->current_transfer->tx_buf;
	303
	304	if (!remaining)
	305	return;
	306
	307	if (at91_usart_spi_tx_ready(aus)) {
	308	at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
	309	aus->current_tx_remaining_bytes--;
	310	}
	311	}
	312
	313	static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
	314	{
	315	int len = aus->current_transfer->len;
	316	int remaining = aus->current_rx_remaining_bytes;
	317	u8 *rx_buf = aus->current_transfer->rx_buf;
	318
	319	if (!remaining)
	320	return;
	321
	322	rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
	323	aus->current_rx_remaining_bytes--;
	324	}
	325
	326	static inline void
	327	at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
	328	struct spi_transfer *xfer)
	329	{
	330	at91_usart_spi_writel(aus, BRGR,
	331	DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
	332	}
	333
	334	static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
	335	{
	336	struct spi_controller *controller = dev_id;
747d4e2c	337	struct at91_usart_spi *aus = spi_controller_get_devdata(controller);
e1892546 RP	338
	339	spin_lock(&aus->lock);
	340	at91_usart_spi_read_status(aus);
	341
	342	if (at91_usart_spi_check_overrun(aus)) {
	343	aus->xfer_failed = true;
	344	at91_usart_spi_writel(aus, IDR, US_IR_OVRE \| US_IR_RXRDY);
	345	spin_unlock(&aus->lock);
	346	return IRQ_HANDLED;
	347	}
	348
	349	if (at91_usart_spi_rx_ready(aus)) {
	350	at91_usart_spi_rx(aus);
	351	spin_unlock(&aus->lock);
	352	return IRQ_HANDLED;
	353	}
	354
	355	spin_unlock(&aus->lock);
	356
	357	return IRQ_NONE;
	358	}
	359
	360	static int at91_usart_spi_setup(struct spi_device *spi)
	361	{
747d4e2c	362	struct at91_usart_spi *aus = spi_controller_get_devdata(spi->controller);
e1892546 RP	363	u32 *ausd = spi->controller_state;
e1892546 RP	364	unsigned int mr = at91_usart_spi_readl(aus, MR);
e1892546 RP	365
	366	if (spi->mode & SPI_CPOL)
	367	mr \|= US_MR_CPOL;
	368	else
	369	mr &= ~US_MR_CPOL;
	370
	371	if (spi->mode & SPI_CPHA)
	372	mr \|= US_MR_CPHA;
	373	else
	374	mr &= ~US_MR_CPHA;
	375
	376	if (spi->mode & SPI_LOOP)
	377	mr \|= US_MR_LOOP;
	378	else
	379	mr &= ~US_MR_LOOP;
	380
	381	if (!ausd) {
	382	ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
	383	if (!ausd)
	384	return -ENOMEM;
	385
	386	spi->controller_state = ausd;
	387	}
	388
	389	*ausd = mr;
	390
	391	dev_dbg(&spi->dev,
	392	"setup: bpw %u mode 0x%x -> mr %d %08x\n",
9e264f3f	393	spi->bits_per_word, spi->mode, spi_get_chipselect(spi, 0), mr);
e1892546 RP	394
	395	return 0;
	396	}
	397
259e0a00 LJ	398	static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
	399	struct spi_device *spi,
	400	struct spi_transfer *xfer)
e1892546	401	{
747d4e2c	402	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
c3fdefc2 RP	403	unsigned long dma_timeout = 0;
c3fdefc2 RP	404	int ret = 0;
e1892546 RP	405
	406	at91_usart_spi_set_xfer_speed(aus, xfer);
	407	aus->xfer_failed = false;
	408	aus->current_transfer = xfer;
	409	aus->current_tx_remaining_bytes = xfer->len;
	410	aus->current_rx_remaining_bytes = xfer->len;
	411
	412	while ((aus->current_tx_remaining_bytes \|\|
	413	aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
c3fdefc2 RP	414	reinit_completion(&aus->xfer_completion);
	415	if (at91_usart_spi_can_dma(ctlr, spi, xfer) &&
	416	!ret) {
	417	ret = at91_usart_spi_dma_transfer(ctlr, xfer);
	418	if (ret)
	419	continue;
	420
	421	dma_timeout = at91_usart_spi_dma_timeout(aus);
	422
	423	if (WARN_ON(dma_timeout == 0)) {
	424	dev_err(&spi->dev, "DMA transfer timeout\n");
	425	return -EIO;
	426	}
	427	aus->current_tx_remaining_bytes = 0;
	428	} else {
	429	at91_usart_spi_read_status(aus);
	430	at91_usart_spi_tx(aus);
	431	}
	432
e1892546 RP	433	cpu_relax();
	434	}
	435
	436	if (aus->xfer_failed) {
	437	dev_err(aus->dev, "Overrun!\n");
	438	return -EIO;
	439	}
	440
	441	return 0;
	442	}
	443
259e0a00 LJ	444	static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
259e0a00 LJ	445	struct spi_message *message)
e1892546	446	{
747d4e2c	447	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
e1892546 RP	448	struct spi_device *spi = message->spi;
	449	u32 *ausd = spi->controller_state;
	450
	451	at91_usart_spi_writel(aus, CR, US_ENABLE);
	452	at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
	453	at91_usart_spi_writel(aus, MR, *ausd);
	454
	455	return 0;
	456	}
	457
259e0a00 LJ	458	static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
259e0a00 LJ	459	struct spi_message *message)
e1892546	460	{
747d4e2c	461	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
e1892546 RP	462
	463	at91_usart_spi_writel(aus, CR, US_RESET \| US_DISABLE);
	464	at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
	465
	466	return 0;
	467	}
	468
	469	static void at91_usart_spi_cleanup(struct spi_device *spi)
	470	{
	471	struct at91_usart_spi_device *ausd = spi->controller_state;
	472
	473	spi->controller_state = NULL;
	474	kfree(ausd);
	475	}
	476
	477	static void at91_usart_spi_init(struct at91_usart_spi *aus)
	478	{
	479	at91_usart_spi_writel(aus, MR, US_INIT);
	480	at91_usart_spi_writel(aus, CR, US_RESET \| US_DISABLE);
	481	}
	482
	483	static int at91_usart_gpio_setup(struct platform_device *pdev)
	484	{
3340ec49	485	struct gpio_descs *cs_gpios;
e1892546	486
3340ec49	487	cs_gpios = devm_gpiod_get_array_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
e1892546	488
3340ec49 MC	489	if (IS_ERR(cs_gpios))
3340ec49 MC	490	return PTR_ERR(cs_gpios);
e1892546 RP	491
	492	return 0;
	493	}
	494
	495	static int at91_usart_spi_probe(struct platform_device *pdev)
	496	{
	497	struct resource *regs;
	498	struct spi_controller *controller;
	499	struct at91_usart_spi *aus;
	500	struct clk *clk;
	501	int irq;
	502	int ret;
	503
	504	regs = platform_get_resource(to_platform_device(pdev->dev.parent),
	505	IORESOURCE_MEM, 0);
	506	if (!regs)
	507	return -EINVAL;
	508
	509	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
	510	if (irq < 0)
	511	return irq;
	512
	513	clk = devm_clk_get(pdev->dev.parent, "usart");
	514	if (IS_ERR(clk))
	515	return PTR_ERR(clk);
	516
	517	ret = -ENOMEM;
747d4e2c	518	controller = spi_alloc_host(&pdev->dev, sizeof(*aus));
e1892546 RP	519	if (!controller)
	520	goto at91_usart_spi_probe_fail;
	521
	522	ret = at91_usart_gpio_setup(pdev);
	523	if (ret)
	524	goto at91_usart_spi_probe_fail;
	525
	526	controller->mode_bits = SPI_CPOL \| SPI_CPHA \| SPI_LOOP \| SPI_CS_HIGH;
	527	controller->dev.of_node = pdev->dev.parent->of_node;
	528	controller->bits_per_word_mask = SPI_BPW_MASK(8);
	529	controller->setup = at91_usart_spi_setup;
	530	controller->flags = SPI_MASTER_MUST_RX \| SPI_MASTER_MUST_TX;
	531	controller->transfer_one = at91_usart_spi_transfer_one;
	532	controller->prepare_message = at91_usart_spi_prepare_message;
	533	controller->unprepare_message = at91_usart_spi_unprepare_message;
c3fdefc2	534	controller->can_dma = at91_usart_spi_can_dma;
e1892546 RP	535	controller->cleanup = at91_usart_spi_cleanup;
	536	controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
	537	US_MIN_CLK_DIV);
	538	controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
	539	US_MAX_CLK_DIV);
	540	platform_set_drvdata(pdev, controller);
	541
747d4e2c	542	aus = spi_controller_get_devdata(controller);
e1892546 RP	543
	544	aus->dev = &pdev->dev;
	545	aus->regs = devm_ioremap_resource(&pdev->dev, regs);
	546	if (IS_ERR(aus->regs)) {
	547	ret = PTR_ERR(aus->regs);
	548	goto at91_usart_spi_probe_fail;
	549	}
	550
	551	aus->irq = irq;
	552	aus->clk = clk;
	553
	554	ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
	555	dev_name(&pdev->dev), controller);
	556	if (ret)
	557	goto at91_usart_spi_probe_fail;
	558
	559	ret = clk_prepare_enable(clk);
	560	if (ret)
	561	goto at91_usart_spi_probe_fail;
	562
	563	aus->spi_clk = clk_get_rate(clk);
	564	at91_usart_spi_init(aus);
	565
c3fdefc2 RP	566	aus->phybase = regs->start;
	567
	568	aus->mpdev = to_platform_device(pdev->dev.parent);
	569
	570	ret = at91_usart_spi_configure_dma(controller, aus);
	571	if (ret)
	572	goto at91_usart_fail_dma;
	573
e1892546	574	spin_lock_init(&aus->lock);
c3fdefc2 RP	575	init_completion(&aus->xfer_completion);
c3fdefc2 RP	576
747d4e2c	577	ret = devm_spi_register_controller(&pdev->dev, controller);
e1892546	578	if (ret)
747d4e2c	579	goto at91_usart_fail_register_controller;
e1892546 RP	580
	581	dev_info(&pdev->dev,
	582	"AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
	583	at91_usart_spi_readl(aus, VERSION),
	584	&regs->start, irq);
	585
	586	return 0;
	587
747d4e2c	588	at91_usart_fail_register_controller:
c3fdefc2 RP	589	at91_usart_spi_release_dma(controller);
c3fdefc2 RP	590	at91_usart_fail_dma:
e1892546 RP	591	clk_disable_unprepare(clk);
e1892546 RP	592	at91_usart_spi_probe_fail:
747d4e2c	593	spi_controller_put(controller);
e1892546 RP	594	return ret;
	595	}
	596
96ed3ecd RP	597	__maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
	598	{
	599	struct spi_controller *ctlr = dev_get_drvdata(dev);
747d4e2c	600	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
96ed3ecd RP	601
	602	clk_disable_unprepare(aus->clk);
	603	pinctrl_pm_select_sleep_state(dev);
	604
	605	return 0;
	606	}
	607
	608	__maybe_unused static int at91_usart_spi_runtime_resume(struct device *dev)
	609	{
	610	struct spi_controller *ctrl = dev_get_drvdata(dev);
747d4e2c	611	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
96ed3ecd RP	612
	613	pinctrl_pm_select_default_state(dev);
	614
	615	return clk_prepare_enable(aus->clk);
	616	}
	617
	618	__maybe_unused static int at91_usart_spi_suspend(struct device *dev)
	619	{
	620	struct spi_controller *ctrl = dev_get_drvdata(dev);
	621	int ret;
	622
	623	ret = spi_controller_suspend(ctrl);
	624	if (ret)
	625	return ret;
	626
	627	if (!pm_runtime_suspended(dev))
	628	at91_usart_spi_runtime_suspend(dev);
	629
	630	return 0;
	631	}
	632
	633	__maybe_unused static int at91_usart_spi_resume(struct device *dev)
	634	{
	635	struct spi_controller *ctrl = dev_get_drvdata(dev);
747d4e2c	636	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
96ed3ecd RP	637	int ret;
	638
	639	if (!pm_runtime_suspended(dev)) {
	640	ret = at91_usart_spi_runtime_resume(dev);
	641	if (ret)
	642	return ret;
	643	}
	644
	645	at91_usart_spi_init(aus);
	646
	647	return spi_controller_resume(ctrl);
	648	}
	649
b9c55448	650	static void at91_usart_spi_remove(struct platform_device *pdev)
e1892546 RP	651	{
e1892546 RP	652	struct spi_controller *ctlr = platform_get_drvdata(pdev);
747d4e2c	653	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
e1892546	654
c3fdefc2	655	at91_usart_spi_release_dma(ctlr);
e1892546	656	clk_disable_unprepare(aus->clk);
e1892546 RP	657	}
e1892546 RP	658
96ed3ecd RP	659	static const struct dev_pm_ops at91_usart_spi_pm_ops = {
	660	SET_SYSTEM_SLEEP_PM_OPS(at91_usart_spi_suspend, at91_usart_spi_resume)
	661	SET_RUNTIME_PM_OPS(at91_usart_spi_runtime_suspend,
	662	at91_usart_spi_runtime_resume, NULL)
	663	};
	664
e1892546 RP	665	static struct platform_driver at91_usart_spi_driver = {
	666	.driver = {
	667	.name = "at91_usart_spi",
96ed3ecd	668	.pm = &at91_usart_spi_pm_ops,
e1892546 RP	669	},
e1892546 RP	670	.probe = at91_usart_spi_probe,
b9c55448	671	.remove_new = at91_usart_spi_remove,
e1892546 RP	672	};
	673
	674	module_platform_driver(at91_usart_spi_driver);
	675
	676	MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
	677	MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
	678	MODULE_LICENSE("GPL v2");
	679	MODULE_ALIAS("platform:at91_usart_spi");