Commit | Line | Data |
---|---|---|
fdb3c18d DB |
1 | /* |
2 | * omap_uwire.c -- MicroWire interface driver for OMAP | |
3 | * | |
4 | * Copyright 2003 MontaVista Software Inc. <source@mvista.com> | |
5 | * | |
6 | * Ported to 2.6 OMAP uwire interface. | |
7 | * Copyright (C) 2004 Texas Instruments. | |
8 | * | |
9 | * Generalization patches by Juha Yrjola <juha.yrjola@nokia.com> | |
10 | * | |
11 | * Copyright (C) 2005 David Brownell (ported to 2.6 SPI interface) | |
12 | * Copyright (C) 2006 Nokia | |
13 | * | |
14 | * Many updates by Imre Deak <imre.deak@nokia.com> | |
15 | * | |
16 | * This program is free software; you can redistribute it and/or modify it | |
17 | * under the terms of the GNU General Public License as published by the | |
18 | * Free Software Foundation; either version 2 of the License, or (at your | |
19 | * option) any later version. | |
20 | * | |
21 | * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED | |
22 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
23 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | |
24 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | |
25 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | |
26 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | |
27 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
28 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
29 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
30 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
31 | * | |
32 | * You should have received a copy of the GNU General Public License along | |
33 | * with this program; if not, write to the Free Software Foundation, Inc., | |
34 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
35 | */ | |
36 | #include <linux/kernel.h> | |
37 | #include <linux/init.h> | |
38 | #include <linux/delay.h> | |
39 | #include <linux/platform_device.h> | |
40 | #include <linux/workqueue.h> | |
41 | #include <linux/interrupt.h> | |
42 | #include <linux/err.h> | |
43 | #include <linux/clk.h> | |
44 | ||
45 | #include <linux/spi/spi.h> | |
46 | #include <linux/spi/spi_bitbang.h> | |
47 | ||
48 | #include <asm/system.h> | |
49 | #include <asm/irq.h> | |
a09e64fb | 50 | #include <mach/hardware.h> |
fdb3c18d DB |
51 | #include <asm/io.h> |
52 | #include <asm/mach-types.h> | |
53 | ||
a09e64fb RK |
54 | #include <mach/mux.h> |
55 | #include <mach/omap730.h> /* OMAP730_IO_CONF registers */ | |
fdb3c18d DB |
56 | |
57 | ||
58 | /* FIXME address is now a platform device resource, | |
59 | * and irqs should show there too... | |
60 | */ | |
61 | #define UWIRE_BASE_PHYS 0xFFFB3000 | |
fdb3c18d DB |
62 | |
63 | /* uWire Registers: */ | |
64 | #define UWIRE_IO_SIZE 0x20 | |
65 | #define UWIRE_TDR 0x00 | |
66 | #define UWIRE_RDR 0x00 | |
67 | #define UWIRE_CSR 0x01 | |
68 | #define UWIRE_SR1 0x02 | |
69 | #define UWIRE_SR2 0x03 | |
70 | #define UWIRE_SR3 0x04 | |
71 | #define UWIRE_SR4 0x05 | |
72 | #define UWIRE_SR5 0x06 | |
73 | ||
74 | /* CSR bits */ | |
75 | #define RDRB (1 << 15) | |
76 | #define CSRB (1 << 14) | |
77 | #define START (1 << 13) | |
78 | #define CS_CMD (1 << 12) | |
79 | ||
80 | /* SR1 or SR2 bits */ | |
81 | #define UWIRE_READ_FALLING_EDGE 0x0001 | |
82 | #define UWIRE_READ_RISING_EDGE 0x0000 | |
83 | #define UWIRE_WRITE_FALLING_EDGE 0x0000 | |
84 | #define UWIRE_WRITE_RISING_EDGE 0x0002 | |
85 | #define UWIRE_CS_ACTIVE_LOW 0x0000 | |
86 | #define UWIRE_CS_ACTIVE_HIGH 0x0004 | |
87 | #define UWIRE_FREQ_DIV_2 0x0000 | |
88 | #define UWIRE_FREQ_DIV_4 0x0008 | |
89 | #define UWIRE_FREQ_DIV_8 0x0010 | |
90 | #define UWIRE_CHK_READY 0x0020 | |
91 | #define UWIRE_CLK_INVERTED 0x0040 | |
92 | ||
93 | ||
94 | struct uwire_spi { | |
95 | struct spi_bitbang bitbang; | |
96 | struct clk *ck; | |
97 | }; | |
98 | ||
99 | struct uwire_state { | |
100 | unsigned bits_per_word; | |
101 | unsigned div1_idx; | |
102 | }; | |
103 | ||
104 | /* REVISIT compile time constant for idx_shift? */ | |
55c381e4 RK |
105 | /* |
106 | * Or, put it in a structure which is used throughout the driver; | |
107 | * that avoids having to issue two loads for each bit of static data. | |
108 | */ | |
fdb3c18d | 109 | static unsigned int uwire_idx_shift; |
55c381e4 | 110 | static void __iomem *uwire_base; |
fdb3c18d DB |
111 | |
112 | static inline void uwire_write_reg(int idx, u16 val) | |
113 | { | |
55c381e4 | 114 | __raw_writew(val, uwire_base + (idx << uwire_idx_shift)); |
fdb3c18d DB |
115 | } |
116 | ||
117 | static inline u16 uwire_read_reg(int idx) | |
118 | { | |
55c381e4 | 119 | return __raw_readw(uwire_base + (idx << uwire_idx_shift)); |
fdb3c18d DB |
120 | } |
121 | ||
122 | static inline void omap_uwire_configure_mode(u8 cs, unsigned long flags) | |
123 | { | |
124 | u16 w, val = 0; | |
125 | int shift, reg; | |
126 | ||
127 | if (flags & UWIRE_CLK_INVERTED) | |
128 | val ^= 0x03; | |
129 | val = flags & 0x3f; | |
130 | if (cs & 1) | |
131 | shift = 6; | |
132 | else | |
133 | shift = 0; | |
134 | if (cs <= 1) | |
135 | reg = UWIRE_SR1; | |
136 | else | |
137 | reg = UWIRE_SR2; | |
138 | ||
139 | w = uwire_read_reg(reg); | |
140 | w &= ~(0x3f << shift); | |
141 | w |= val << shift; | |
142 | uwire_write_reg(reg, w); | |
143 | } | |
144 | ||
145 | static int wait_uwire_csr_flag(u16 mask, u16 val, int might_not_catch) | |
146 | { | |
147 | u16 w; | |
148 | int c = 0; | |
149 | unsigned long max_jiffies = jiffies + HZ; | |
150 | ||
151 | for (;;) { | |
152 | w = uwire_read_reg(UWIRE_CSR); | |
153 | if ((w & mask) == val) | |
154 | break; | |
155 | if (time_after(jiffies, max_jiffies)) { | |
156 | printk(KERN_ERR "%s: timeout. reg=%#06x " | |
157 | "mask=%#06x val=%#06x\n", | |
b687d2a8 | 158 | __func__, w, mask, val); |
fdb3c18d DB |
159 | return -1; |
160 | } | |
161 | c++; | |
162 | if (might_not_catch && c > 64) | |
163 | break; | |
164 | } | |
165 | return 0; | |
166 | } | |
167 | ||
168 | static void uwire_set_clk1_div(int div1_idx) | |
169 | { | |
170 | u16 w; | |
171 | ||
172 | w = uwire_read_reg(UWIRE_SR3); | |
173 | w &= ~(0x03 << 1); | |
174 | w |= div1_idx << 1; | |
175 | uwire_write_reg(UWIRE_SR3, w); | |
176 | } | |
177 | ||
178 | static void uwire_chipselect(struct spi_device *spi, int value) | |
179 | { | |
180 | struct uwire_state *ust = spi->controller_state; | |
181 | u16 w; | |
182 | int old_cs; | |
183 | ||
184 | ||
185 | BUG_ON(wait_uwire_csr_flag(CSRB, 0, 0)); | |
186 | ||
187 | w = uwire_read_reg(UWIRE_CSR); | |
188 | old_cs = (w >> 10) & 0x03; | |
189 | if (value == BITBANG_CS_INACTIVE || old_cs != spi->chip_select) { | |
190 | /* Deselect this CS, or the previous CS */ | |
191 | w &= ~CS_CMD; | |
192 | uwire_write_reg(UWIRE_CSR, w); | |
193 | } | |
194 | /* activate specfied chipselect */ | |
195 | if (value == BITBANG_CS_ACTIVE) { | |
196 | uwire_set_clk1_div(ust->div1_idx); | |
197 | /* invert clock? */ | |
198 | if (spi->mode & SPI_CPOL) | |
199 | uwire_write_reg(UWIRE_SR4, 1); | |
200 | else | |
201 | uwire_write_reg(UWIRE_SR4, 0); | |
202 | ||
203 | w = spi->chip_select << 10; | |
204 | w |= CS_CMD; | |
205 | uwire_write_reg(UWIRE_CSR, w); | |
206 | } | |
207 | } | |
208 | ||
209 | static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t) | |
210 | { | |
211 | struct uwire_state *ust = spi->controller_state; | |
212 | unsigned len = t->len; | |
213 | unsigned bits = ust->bits_per_word; | |
214 | unsigned bytes; | |
215 | u16 val, w; | |
216 | int status = 0;; | |
217 | ||
218 | if (!t->tx_buf && !t->rx_buf) | |
219 | return 0; | |
220 | ||
221 | /* Microwire doesn't read and write concurrently */ | |
222 | if (t->tx_buf && t->rx_buf) | |
223 | return -EPERM; | |
224 | ||
225 | w = spi->chip_select << 10; | |
226 | w |= CS_CMD; | |
227 | ||
228 | if (t->tx_buf) { | |
229 | const u8 *buf = t->tx_buf; | |
230 | ||
231 | /* NOTE: DMA could be used for TX transfers */ | |
232 | ||
233 | /* write one or two bytes at a time */ | |
234 | while (len >= 1) { | |
235 | /* tx bit 15 is first sent; we byteswap multibyte words | |
236 | * (msb-first) on the way out from memory. | |
237 | */ | |
238 | val = *buf++; | |
239 | if (bits > 8) { | |
240 | bytes = 2; | |
241 | val |= *buf++ << 8; | |
242 | } else | |
243 | bytes = 1; | |
244 | val <<= 16 - bits; | |
245 | ||
246 | #ifdef VERBOSE | |
247 | pr_debug("%s: write-%d =%04x\n", | |
6c7377ab | 248 | dev_name(&spi->dev), bits, val); |
fdb3c18d DB |
249 | #endif |
250 | if (wait_uwire_csr_flag(CSRB, 0, 0)) | |
251 | goto eio; | |
252 | ||
253 | uwire_write_reg(UWIRE_TDR, val); | |
254 | ||
255 | /* start write */ | |
256 | val = START | w | (bits << 5); | |
257 | ||
258 | uwire_write_reg(UWIRE_CSR, val); | |
259 | len -= bytes; | |
260 | ||
261 | /* Wait till write actually starts. | |
262 | * This is needed with MPU clock 60+ MHz. | |
263 | * REVISIT: we may not have time to catch it... | |
264 | */ | |
265 | if (wait_uwire_csr_flag(CSRB, CSRB, 1)) | |
266 | goto eio; | |
267 | ||
268 | status += bytes; | |
269 | } | |
270 | ||
271 | /* REVISIT: save this for later to get more i/o overlap */ | |
272 | if (wait_uwire_csr_flag(CSRB, 0, 0)) | |
273 | goto eio; | |
274 | ||
275 | } else if (t->rx_buf) { | |
276 | u8 *buf = t->rx_buf; | |
277 | ||
278 | /* read one or two bytes at a time */ | |
279 | while (len) { | |
280 | if (bits > 8) { | |
281 | bytes = 2; | |
282 | } else | |
283 | bytes = 1; | |
284 | ||
285 | /* start read */ | |
286 | val = START | w | (bits << 0); | |
287 | uwire_write_reg(UWIRE_CSR, val); | |
288 | len -= bytes; | |
289 | ||
290 | /* Wait till read actually starts */ | |
291 | (void) wait_uwire_csr_flag(CSRB, CSRB, 1); | |
292 | ||
293 | if (wait_uwire_csr_flag(RDRB | CSRB, | |
294 | RDRB, 0)) | |
295 | goto eio; | |
296 | ||
297 | /* rx bit 0 is last received; multibyte words will | |
298 | * be properly byteswapped on the way to memory. | |
299 | */ | |
300 | val = uwire_read_reg(UWIRE_RDR); | |
301 | val &= (1 << bits) - 1; | |
302 | *buf++ = (u8) val; | |
303 | if (bytes == 2) | |
304 | *buf++ = val >> 8; | |
305 | status += bytes; | |
306 | #ifdef VERBOSE | |
307 | pr_debug("%s: read-%d =%04x\n", | |
6c7377ab | 308 | dev_name(&spi->dev), bits, val); |
fdb3c18d DB |
309 | #endif |
310 | ||
311 | } | |
312 | } | |
313 | return status; | |
314 | eio: | |
315 | return -EIO; | |
316 | } | |
317 | ||
318 | static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) | |
319 | { | |
320 | struct uwire_state *ust = spi->controller_state; | |
321 | struct uwire_spi *uwire; | |
322 | unsigned flags = 0; | |
323 | unsigned bits; | |
324 | unsigned hz; | |
325 | unsigned long rate; | |
326 | int div1_idx; | |
327 | int div1; | |
328 | int div2; | |
329 | int status; | |
330 | ||
331 | uwire = spi_master_get_devdata(spi->master); | |
332 | ||
333 | if (spi->chip_select > 3) { | |
6c7377ab | 334 | pr_debug("%s: cs%d?\n", dev_name(&spi->dev), spi->chip_select); |
fdb3c18d DB |
335 | status = -ENODEV; |
336 | goto done; | |
337 | } | |
338 | ||
339 | bits = spi->bits_per_word; | |
340 | if (t != NULL && t->bits_per_word) | |
341 | bits = t->bits_per_word; | |
342 | if (!bits) | |
343 | bits = 8; | |
344 | ||
345 | if (bits > 16) { | |
6c7377ab | 346 | pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits); |
fdb3c18d DB |
347 | status = -ENODEV; |
348 | goto done; | |
349 | } | |
350 | ust->bits_per_word = bits; | |
351 | ||
352 | /* mode 0..3, clock inverted separately; | |
353 | * standard nCS signaling; | |
354 | * don't treat DI=high as "not ready" | |
355 | */ | |
356 | if (spi->mode & SPI_CS_HIGH) | |
357 | flags |= UWIRE_CS_ACTIVE_HIGH; | |
358 | ||
359 | if (spi->mode & SPI_CPOL) | |
360 | flags |= UWIRE_CLK_INVERTED; | |
361 | ||
362 | switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { | |
363 | case SPI_MODE_0: | |
364 | case SPI_MODE_3: | |
e5f1b194 | 365 | flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE; |
fdb3c18d DB |
366 | break; |
367 | case SPI_MODE_1: | |
368 | case SPI_MODE_2: | |
e5f1b194 | 369 | flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE; |
fdb3c18d DB |
370 | break; |
371 | } | |
372 | ||
373 | /* assume it's already enabled */ | |
374 | rate = clk_get_rate(uwire->ck); | |
375 | ||
376 | hz = spi->max_speed_hz; | |
377 | if (t != NULL && t->speed_hz) | |
378 | hz = t->speed_hz; | |
379 | ||
380 | if (!hz) { | |
6c7377ab | 381 | pr_debug("%s: zero speed?\n", dev_name(&spi->dev)); |
fdb3c18d DB |
382 | status = -EINVAL; |
383 | goto done; | |
384 | } | |
385 | ||
386 | /* F_INT = mpu_xor_clk / DIV1 */ | |
387 | for (div1_idx = 0; div1_idx < 4; div1_idx++) { | |
388 | switch (div1_idx) { | |
389 | case 0: | |
390 | div1 = 2; | |
391 | break; | |
392 | case 1: | |
393 | div1 = 4; | |
394 | break; | |
395 | case 2: | |
396 | div1 = 7; | |
397 | break; | |
398 | default: | |
399 | case 3: | |
400 | div1 = 10; | |
401 | break; | |
402 | } | |
403 | div2 = (rate / div1 + hz - 1) / hz; | |
404 | if (div2 <= 8) | |
405 | break; | |
406 | } | |
407 | if (div1_idx == 4) { | |
408 | pr_debug("%s: lowest clock %ld, need %d\n", | |
6c7377ab | 409 | dev_name(&spi->dev), rate / 10 / 8, hz); |
fdb3c18d DB |
410 | status = -EDOM; |
411 | goto done; | |
412 | } | |
413 | ||
414 | /* we have to cache this and reset in uwire_chipselect as this is a | |
415 | * global parameter and another uwire device can change it under | |
416 | * us */ | |
417 | ust->div1_idx = div1_idx; | |
418 | uwire_set_clk1_div(div1_idx); | |
419 | ||
420 | rate /= div1; | |
421 | ||
422 | switch (div2) { | |
423 | case 0: | |
424 | case 1: | |
425 | case 2: | |
426 | flags |= UWIRE_FREQ_DIV_2; | |
427 | rate /= 2; | |
428 | break; | |
429 | case 3: | |
430 | case 4: | |
431 | flags |= UWIRE_FREQ_DIV_4; | |
432 | rate /= 4; | |
433 | break; | |
434 | case 5: | |
435 | case 6: | |
436 | case 7: | |
437 | case 8: | |
438 | flags |= UWIRE_FREQ_DIV_8; | |
439 | rate /= 8; | |
440 | break; | |
441 | } | |
442 | omap_uwire_configure_mode(spi->chip_select, flags); | |
443 | pr_debug("%s: uwire flags %02x, armxor %lu KHz, SCK %lu KHz\n", | |
b687d2a8 | 444 | __func__, flags, |
fdb3c18d DB |
445 | clk_get_rate(uwire->ck) / 1000, |
446 | rate / 1000); | |
447 | status = 0; | |
448 | done: | |
449 | return status; | |
450 | } | |
451 | ||
dccd573b DB |
452 | /* the spi->mode bits understood by this driver: */ |
453 | #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) | |
454 | ||
fdb3c18d DB |
455 | static int uwire_setup(struct spi_device *spi) |
456 | { | |
457 | struct uwire_state *ust = spi->controller_state; | |
458 | ||
dccd573b DB |
459 | if (spi->mode & ~MODEBITS) { |
460 | dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n", | |
461 | spi->mode & ~MODEBITS); | |
462 | return -EINVAL; | |
463 | } | |
464 | ||
fdb3c18d DB |
465 | if (ust == NULL) { |
466 | ust = kzalloc(sizeof(*ust), GFP_KERNEL); | |
467 | if (ust == NULL) | |
468 | return -ENOMEM; | |
469 | spi->controller_state = ust; | |
470 | } | |
471 | ||
472 | return uwire_setup_transfer(spi, NULL); | |
473 | } | |
474 | ||
bb2d1c36 | 475 | static void uwire_cleanup(struct spi_device *spi) |
fdb3c18d DB |
476 | { |
477 | kfree(spi->controller_state); | |
478 | } | |
479 | ||
480 | static void uwire_off(struct uwire_spi *uwire) | |
481 | { | |
482 | uwire_write_reg(UWIRE_SR3, 0); | |
483 | clk_disable(uwire->ck); | |
484 | clk_put(uwire->ck); | |
485 | spi_master_put(uwire->bitbang.master); | |
486 | } | |
487 | ||
d1e44d9c | 488 | static int __init uwire_probe(struct platform_device *pdev) |
fdb3c18d DB |
489 | { |
490 | struct spi_master *master; | |
491 | struct uwire_spi *uwire; | |
492 | int status; | |
493 | ||
494 | master = spi_alloc_master(&pdev->dev, sizeof *uwire); | |
495 | if (!master) | |
496 | return -ENODEV; | |
497 | ||
498 | uwire = spi_master_get_devdata(master); | |
55c381e4 RK |
499 | |
500 | uwire_base = ioremap(UWIRE_BASE_PHYS, UWIRE_IO_SIZE); | |
501 | if (!uwire_base) { | |
502 | dev_dbg(&pdev->dev, "can't ioremap UWIRE\n"); | |
503 | spi_master_put(master); | |
504 | return -ENOMEM; | |
505 | } | |
506 | ||
fdb3c18d DB |
507 | dev_set_drvdata(&pdev->dev, uwire); |
508 | ||
509 | uwire->ck = clk_get(&pdev->dev, "armxor_ck"); | |
510 | if (!uwire->ck || IS_ERR(uwire->ck)) { | |
511 | dev_dbg(&pdev->dev, "no mpu_xor_clk ?\n"); | |
512 | spi_master_put(master); | |
513 | return -ENODEV; | |
514 | } | |
515 | clk_enable(uwire->ck); | |
516 | ||
517 | if (cpu_is_omap730()) | |
518 | uwire_idx_shift = 1; | |
519 | else | |
520 | uwire_idx_shift = 2; | |
521 | ||
522 | uwire_write_reg(UWIRE_SR3, 1); | |
523 | ||
524 | master->bus_num = 2; /* "official" */ | |
525 | master->num_chipselect = 4; | |
526 | master->setup = uwire_setup; | |
527 | master->cleanup = uwire_cleanup; | |
528 | ||
529 | uwire->bitbang.master = master; | |
530 | uwire->bitbang.chipselect = uwire_chipselect; | |
531 | uwire->bitbang.setup_transfer = uwire_setup_transfer; | |
532 | uwire->bitbang.txrx_bufs = uwire_txrx; | |
533 | ||
534 | status = spi_bitbang_start(&uwire->bitbang); | |
55c381e4 | 535 | if (status < 0) { |
fdb3c18d | 536 | uwire_off(uwire); |
55c381e4 RK |
537 | iounmap(uwire_base); |
538 | } | |
fdb3c18d DB |
539 | return status; |
540 | } | |
541 | ||
d1e44d9c | 542 | static int __exit uwire_remove(struct platform_device *pdev) |
fdb3c18d DB |
543 | { |
544 | struct uwire_spi *uwire = dev_get_drvdata(&pdev->dev); | |
545 | int status; | |
546 | ||
547 | // FIXME remove all child devices, somewhere ... | |
548 | ||
549 | status = spi_bitbang_stop(&uwire->bitbang); | |
550 | uwire_off(uwire); | |
55c381e4 | 551 | iounmap(uwire_base); |
fdb3c18d DB |
552 | return status; |
553 | } | |
554 | ||
7e38c3c4 KS |
555 | /* work with hotplug and coldplug */ |
556 | MODULE_ALIAS("platform:omap_uwire"); | |
557 | ||
fdb3c18d DB |
558 | static struct platform_driver uwire_driver = { |
559 | .driver = { | |
560 | .name = "omap_uwire", | |
fdb3c18d DB |
561 | .owner = THIS_MODULE, |
562 | }, | |
d1e44d9c | 563 | .remove = __exit_p(uwire_remove), |
fdb3c18d DB |
564 | // suspend ... unuse ck |
565 | // resume ... use ck | |
566 | }; | |
567 | ||
568 | static int __init omap_uwire_init(void) | |
569 | { | |
570 | /* FIXME move these into the relevant board init code. also, include | |
571 | * H3 support; it uses tsc2101 like H2 (on a different chipselect). | |
572 | */ | |
573 | ||
574 | if (machine_is_omap_h2()) { | |
575 | /* defaults: W21 SDO, U18 SDI, V19 SCL */ | |
576 | omap_cfg_reg(N14_1610_UWIRE_CS0); | |
577 | omap_cfg_reg(N15_1610_UWIRE_CS1); | |
578 | } | |
579 | if (machine_is_omap_perseus2()) { | |
580 | /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ | |
581 | int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000; | |
582 | omap_writel(val | 0x00AAA000, OMAP730_IO_CONF_9); | |
583 | } | |
584 | ||
d1e44d9c | 585 | return platform_driver_probe(&uwire_driver, uwire_probe); |
fdb3c18d DB |
586 | } |
587 | ||
588 | static void __exit omap_uwire_exit(void) | |
589 | { | |
590 | platform_driver_unregister(&uwire_driver); | |
591 | } | |
592 | ||
593 | subsys_initcall(omap_uwire_init); | |
594 | module_exit(omap_uwire_exit); | |
595 | ||
596 | MODULE_LICENSE("GPL"); | |
597 |