projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
[linux-2.6-block.git] / drivers / serial / serial_cs.c
CommitLineData
1da177e4
LT		 1/*======================================================================
2
3 A driver for PCMCIA serial devices
4
5 serial_cs.c 1.134 2002/05/04 05:48:53
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32======================================================================*/
33
34#include <linux/module.h>
35#include <linux/moduleparam.h>
36#include <linux/kernel.h>
37#include <linux/init.h>
1da177e4
LT		 38#include <linux/ptrace.h>
39#include <linux/slab.h>
40#include <linux/string.h>
41#include <linux/timer.h>
42#include <linux/serial_core.h>
30bac7aa 43#include <linux/delay.h>
1da177e4
LT		 44#include <linux/major.h>
45#include <asm/io.h>
46#include <asm/system.h>
47
1da177e4
LT		 48#include <pcmcia/cs_types.h>
49#include <pcmcia/cs.h>
50#include <pcmcia/cistpl.h>
51#include <pcmcia/ciscode.h>
52#include <pcmcia/ds.h>
53#include <pcmcia/cisreg.h>
54
55#include "8250.h"
56
1da177e4
LT		 57
58/*====================================================================*/
59
60/* Parameters that can be set with 'insmod' */
61
62/* Enable the speaker? */
63static int do_sound = 1;
64/* Skip strict UART tests? */
65static int buggy_uart;
66
67module_param(do_sound, int, 0444);
68module_param(buggy_uart, int, 0444);
69
70/*====================================================================*/
71
72/* Table of multi-port card ID's */
73
1fbbac4b 74struct serial_quirk {
a8244b56
RK		 75 unsigned int manfid;
76 unsigned int prodid;
1da177e4 77 int multi; /* 1 = multifunction, > 1 = # ports */
efd92dfa 78 void (*config)(struct pcmcia_device *);
f3d10688 79 void (*setup)(struct pcmcia_device *, struct uart_port *);
7ef057fa 80 void (*wakeup)(struct pcmcia_device *);
eee3a883 81 int (*post)(struct pcmcia_device *);
1da177e4
LT		 82};
83
eee3a883
RK		 84struct serial_info {
85 struct pcmcia_device *p_dev;
86 int ndev;
87 int multi;
88 int slave;
89 int manfid;
90 int prodid;
91 int c950ctrl;
92 dev_node_t node[4];
93 int line[4];
94 const struct serial_quirk *quirk;
95};
96
97struct serial_cfg_mem {
98 tuple_t tuple;
99 cisparse_t parse;
100 u_char buf[256];
101};
102
f3d10688
RK		 103/*
104 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
105 * manfid 0x0160, 0x0104
106 * This card appears to have a 14.7456MHz clock.
107 */
108static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
109{
110 port->uartclk = 14745600;
111}
112
eee3a883
RK		 113static int quirk_post_ibm(struct pcmcia_device *link)
114{
115 conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
9ec0bf41
DB		 116 int ret;
117
118 ret = pcmcia_access_configuration_register(link, &reg);
119 if (ret)
120 goto failed;
eee3a883 121
eee3a883
RK		 122 reg.Action = CS_WRITE;
123 reg.Value = reg.Value | 1;
9ec0bf41
DB		 124 ret = pcmcia_access_configuration_register(link, &reg);
125 if (ret)
126 goto failed;
eee3a883
RK		 127 return 0;
128
9ec0bf41 129 failed:
eee3a883
RK		 130 return -ENODEV;
131}
132
20f13049
RK		 133/*
134 * Nokia cards are not really multiport cards. Shouldn't this
135 * be handled by setting the quirk entry .multi = 0 | 1 ?
136 */
137static void quirk_config_nokia(struct pcmcia_device *link)
138{
139 struct serial_info *info = link->priv;
140
141 if (info->multi > 1)
142 info->multi = 1;
143}
144
7ef057fa
RK		 145static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
146{
147 struct serial_info *info = link->priv;
148
18c576f9
PM		 149 if (info->c950ctrl)
150 outb(12, info->c950ctrl + 1);
7ef057fa
RK		 151}
152
153/* request_region? oxsemi branch does no request_region too... */
154/*
155 * This sequence is needed to properly initialize MC45 attached to OXCF950.
156 * I tried decreasing these msleep()s, but it worked properly (survived
157 * 1000 stop/start operations) with these timeouts (or bigger).
158 */
159static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
160{
161 struct serial_info *info = link->priv;
162 unsigned int ctrl = info->c950ctrl;
163
164 outb(0xA, ctrl + 1);
165 msleep(100);
166 outb(0xE, ctrl + 1);
167 msleep(300);
168 outb(0xC, ctrl + 1);
169 msleep(100);
170 outb(0xE, ctrl + 1);
171 msleep(200);
172 outb(0xF, ctrl + 1);
173 msleep(100);
174 outb(0xE, ctrl + 1);
175 msleep(100);
176 outb(0xC, ctrl + 1);
177}
178
efd92dfa
RK		 179/*
180 * Socket Dual IO: this enables irq's for second port
181 */
182static void quirk_config_socket(struct pcmcia_device *link)
183{
184 struct serial_info *info = link->priv;
185
186 if (info->multi) {
187 link->conf.Present |= PRESENT_EXT_STATUS;
188 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
189 }
190}
191
1fbbac4b
RK		 192static const struct serial_quirk quirks[] = {
193 {
f3d10688
RK		 194 .manfid = 0x0160,
195 .prodid = 0x0104,
196 .multi = -1,
197 .setup = quirk_setup_brainboxes_0104,
198 }, {
eee3a883
RK		 199 .manfid = MANFID_IBM,
200 .prodid = ~0,
201 .multi = -1,
202 .post = quirk_post_ibm,
7ef057fa
RK		 203 }, {
204 .manfid = MANFID_INTEL,
205 .prodid = PRODID_INTEL_DUAL_RS232,
206 .multi = 2,
207 }, {
208 .manfid = MANFID_NATINST,
209 .prodid = PRODID_NATINST_QUAD_RS232,
210 .multi = 4,
20f13049
RK		 211 }, {
212 .manfid = MANFID_NOKIA,
213 .prodid = ~0,
214 .multi = -1,
215 .config = quirk_config_nokia,
eee3a883 216 }, {
1fbbac4b
RK		 217 .manfid = MANFID_OMEGA,
218 .prodid = PRODID_OMEGA_QSP_100,
219 .multi = 4,
7ef057fa
RK		 220 }, {
221 .manfid = MANFID_OXSEMI,
222 .prodid = ~0,
223 .multi = -1,
224 .wakeup = quirk_wakeup_oxsemi,
225 }, {
226 .manfid = MANFID_POSSIO,
227 .prodid = PRODID_POSSIO_GCC,
228 .multi = -1,
229 .wakeup = quirk_wakeup_possio_gcc,
1fbbac4b
RK		 230 }, {
231 .manfid = MANFID_QUATECH,
232 .prodid = PRODID_QUATECH_DUAL_RS232,
233 .multi = 2,
234 }, {
235 .manfid = MANFID_QUATECH,
236 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
237 .multi = 2,
bb289bc4
SO		 238 }, {
239 .manfid = MANFID_QUATECH,
240 .prodid = PRODID_QUATECH_DUAL_RS232_G,
241 .multi = 2,
1fbbac4b
RK		 242 }, {
243 .manfid = MANFID_QUATECH,
244 .prodid = PRODID_QUATECH_QUAD_RS232,
245 .multi = 4,
246 }, {
247 .manfid = MANFID_SOCKET,
248 .prodid = PRODID_SOCKET_DUAL_RS232,
249 .multi = 2,
efd92dfa
RK		 250 .config = quirk_config_socket,
251 }, {
252 .manfid = MANFID_SOCKET,
253 .prodid = ~0,
254 .multi = -1,
255 .config = quirk_config_socket,
1fbbac4b 256 }
1da177e4 257};
1da177e4 258
16f31113 259
15b99ac1 260static int serial_config(struct pcmcia_device * link);
1da177e4 261
1da177e4 262
1da177e4
LT		 263/*======================================================================
264
265 After a card is removed, serial_remove() will unregister
266 the serial device(s), and release the PCMCIA configuration.
267
268======================================================================*/
269
fba395ee 270static void serial_remove(struct pcmcia_device *link)
1da177e4
LT		 271{
272 struct serial_info *info = link->priv;
273 int i;
274
9ec0bf41 275 dev_dbg(&link->dev, "serial_release\n");
1da177e4
LT		 276
277 /*
278 * Recheck to see if the device is still configured.
279 */
e2d40963
DB		 280 for (i = 0; i < info->ndev; i++)
281 serial8250_unregister_port(info->line[i]);
1da177e4 282
e2d40963 283 info->p_dev->dev_node = NULL;
1da177e4 284
e2d40963
DB		 285 if (!info->slave)
286 pcmcia_disable_device(link);
1da177e4
LT		 287}
288
fba395ee 289static int serial_suspend(struct pcmcia_device *link)
1da177e4 290{
e2d40963
DB		 291 struct serial_info *info = link->priv;
292 int i;
1da177e4 293
e2d40963
DB		 294 for (i = 0; i < info->ndev; i++)
295 serial8250_suspend_port(info->line[i]);
98e4c28b
DB		 296
297 return 0;
1da177e4
LT		 298}
299
fba395ee 300static int serial_resume(struct pcmcia_device *link)
1da177e4 301{
fe59d537
RK		 302 struct serial_info *info = link->priv;
303 int i;
1da177e4 304
fe59d537
RK		 305 for (i = 0; i < info->ndev; i++)
306 serial8250_resume_port(info->line[i]);
7ef057fa 307
fe59d537
RK		 308 if (info->quirk && info->quirk->wakeup)
309 info->quirk->wakeup(link);
98e4c28b
DB		 310
311 return 0;
1da177e4
LT		 312}
313
314/*======================================================================
315
316 serial_attach() creates an "instance" of the driver, allocating
317 local data structures for one device. The device is registered
318 with Card Services.
319
320======================================================================*/
321
fba395ee 322static int serial_probe(struct pcmcia_device *link)
1da177e4
LT		 323{
324 struct serial_info *info;
1da177e4 325
9ec0bf41 326 dev_dbg(&link->dev, "serial_attach()\n");
1da177e4
LT		 327
328 /* Create new serial device */
8f31bb39 329 info = kzalloc(sizeof (*info), GFP_KERNEL);
1da177e4 330 if (!info)
f8cfa618 331 return -ENOMEM;
fba395ee 332 info->p_dev = link;
1da177e4
LT		 333 link->priv = info;
334
335 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
336 link->io.NumPorts1 = 8;
5e7bf8cc 337 link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
1da177e4
LT		 338 link->conf.Attributes = CONF_ENABLE_IRQ;
339 if (do_sound) {
340 link->conf.Attributes |= CONF_ENABLE_SPKR;
341 link->conf.Status = CCSR_AUDIO_ENA;
342 }
343 link->conf.IntType = INT_MEMORY_AND_IO;
344
15b99ac1 345 return serial_config(link);
1da177e4
LT		 346}
347
348/*======================================================================
349
350 This deletes a driver "instance". The device is de-registered
351 with Card Services. If it has been released, all local data
352 structures are freed. Otherwise, the structures will be freed
353 when the device is released.
354
355======================================================================*/
356
fba395ee 357static void serial_detach(struct pcmcia_device *link)
1da177e4
LT		 358{
359 struct serial_info *info = link->priv;
1da177e4 360
9ec0bf41 361 dev_dbg(&link->dev, "serial_detach\n");
1da177e4 362
1da177e4
LT		 363 /*
364 * Ensure any outstanding scheduled tasks are completed.
365 */
366 flush_scheduled_work();
367
368 /*
369 * Ensure that the ports have been released.
370 */
371 serial_remove(link);
372
b4635811 373 /* free bits */
1da177e4
LT		 374 kfree(info);
375}
376
377/*====================================================================*/
378
fba395ee 379static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
906da809 380 unsigned int iobase, int irq)
1da177e4
LT		 381{
382 struct uart_port port;
383 int line;
384
385 memset(&port, 0, sizeof (struct uart_port));
386 port.iobase = iobase;
387 port.irq = irq;
388 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
389 port.uartclk = 1843200;
dd2e5a15 390 port.dev = &handle->dev;
1da177e4
LT		 391 if (buggy_uart)
392 port.flags |= UPF_BUGGY_UART;
f3d10688
RK		 393
394 if (info->quirk && info->quirk->setup)
395 info->quirk->setup(handle, &port);
396
1da177e4
LT		 397 line = serial8250_register_port(&port);
398 if (line < 0) {
399 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
400 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
401 return -EINVAL;
402 }
403
404 info->line[info->ndev] = line;
405 sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
406 info->node[info->ndev].major = TTY_MAJOR;
407 info->node[info->ndev].minor = 0x40 + line;
408 if (info->ndev > 0)
409 info->node[info->ndev - 1].next = &info->node[info->ndev];
410 info->ndev++;
411
412 return 0;
413}
414
415/*====================================================================*/
416
84e2d340
DB		 417static int simple_config_check(struct pcmcia_device *p_dev,
418 cistpl_cftable_entry_t *cf,
8e2fc39d 419 cistpl_cftable_entry_t *dflt,
ad913c11 420 unsigned int vcc,
84e2d340 421 void *priv_data)
1da177e4 422{
84e2d340
DB		 423 static const int size_table[2] = { 8, 16 };
424 int *try = priv_data;
425
426 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
427 p_dev->conf.Vpp =
428 cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
429
430 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
431 && (cf->io.win[0].base != 0)) {
84e2d340
DB		 432 p_dev->io.BasePort1 = cf->io.win[0].base;
433 p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
434 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
435 if (!pcmcia_request_io(p_dev, &p_dev->io))
436 return 0;
437 }
438 return -EINVAL;
1da177e4
LT		 439}
440
84e2d340
DB		 441static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
442 cistpl_cftable_entry_t *cf,
8e2fc39d 443 cistpl_cftable_entry_t *dflt,
ad913c11 444 unsigned int vcc,
84e2d340
DB		 445 void *priv_data)
446{
447 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
448 int j;
449
450 if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
84e2d340
DB		 451 for (j = 0; j < 5; j++) {
452 p_dev->io.BasePort1 = base[j];
453 p_dev->io.IOAddrLines = base[j] ? 16 : 3;
454 if (!pcmcia_request_io(p_dev, &p_dev->io))
455 return 0;
456 }
457 }
458 return -ENODEV;
459}
1da177e4 460
fba395ee 461static int simple_config(struct pcmcia_device *link)
1da177e4 462{
1da177e4 463 struct serial_info *info = link->priv;
ef313e36 464 int i = -ENODEV, try;
16f31113 465
1da177e4 466 /* If the card is already configured, look up the port and irq */
ef313e36 467 if (link->function_config) {
906da809 468 unsigned int port = 0;
ef313e36
DB		 469 if ((link->io.BasePort2 != 0) &&
470 (link->io.NumPorts2 == 8)) {
471 port = link->io.BasePort2;
1da177e4
LT		 472 info->slave = 1;
473 } else if ((info->manfid == MANFID_OSITECH) &&
ef313e36
DB		 474 (link->io.NumPorts1 == 0x40)) {
475 port = link->io.BasePort1 + 0x28;
1da177e4
LT		 476 info->slave = 1;
477 }
16f31113 478 if (info->slave) {
ef313e36
DB		 479 return setup_serial(link, info, port,
480 link->irq.AssignedIRQ);
16f31113 481 }
1da177e4 482 }
1da177e4 483
84e2d340
DB		 484 /* First pass: look for a config entry that looks normal.
485 * Two tries: without IO aliases, then with aliases */
486 for (try = 0; try < 4; try++)
487 if (!pcmcia_loop_config(link, simple_config_check, &try))
488 goto found_port;
489
1da177e4
LT		 490 /* Second pass: try to find an entry that isn't picky about
491 its base address, then try to grab any standard serial port
492 address, and finally try to get any free port. */
84e2d340
DB		 493 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
494 goto found_port;
1da177e4 495
84e2d340
DB		 496 printk(KERN_NOTICE
497 "serial_cs: no usable port range found, giving up\n");
84e2d340 498 return -1;
1da177e4 499
84e2d340 500found_port:
fba395ee 501 i = pcmcia_request_irq(link, &link->irq);
9ec0bf41 502 if (i != 0)
1da177e4 503 link->irq.AssignedIRQ = 0;
9ec0bf41 504
1da177e4
LT		 505 if (info->multi && (info->manfid == MANFID_3COM))
506 link->conf.ConfigIndex &= ~(0x08);
efd92dfa
RK		 507
508 /*
509 * Apply any configuration quirks.
510 */
511 if (info->quirk && info->quirk->config)
512 info->quirk->config(link);
513
fba395ee 514 i = pcmcia_request_configuration(link, &link->conf);
9ec0bf41 515 if (i != 0)
1da177e4 516 return -1;
fba395ee 517 return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
1da177e4
LT		 518}
519
84e2d340
DB		 520static int multi_config_check(struct pcmcia_device *p_dev,
521 cistpl_cftable_entry_t *cf,
8e2fc39d 522 cistpl_cftable_entry_t *dflt,
ad913c11 523 unsigned int vcc,
84e2d340 524 void *priv_data)
1da177e4 525{
84e2d340
DB		 526 int *base2 = priv_data;
527
528 /* The quad port cards have bad CIS's, so just look for a
529 window larger than 8 ports and assume it will be right */
530 if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
84e2d340
DB		 531 p_dev->io.BasePort1 = cf->io.win[0].base;
532 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
533 if (!pcmcia_request_io(p_dev, &p_dev->io)) {
534 *base2 = p_dev->io.BasePort1 + 8;
535 return 0;
536 }
537 }
538 return -ENODEV;
539}
16f31113 540
84e2d340
DB		 541static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
542 cistpl_cftable_entry_t *cf,
8e2fc39d 543 cistpl_cftable_entry_t *dflt,
ad913c11 544 unsigned int vcc,
84e2d340
DB		 545 void *priv_data)
546{
547 int *base2 = priv_data;
548
549 if (cf->io.nwin == 2) {
84e2d340
DB		 550 p_dev->io.BasePort1 = cf->io.win[0].base;
551 p_dev->io.BasePort2 = cf->io.win[1].base;
552 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
553 if (!pcmcia_request_io(p_dev, &p_dev->io)) {
554 *base2 = p_dev->io.BasePort2;
555 return 0;
556 }
557 }
558 return -ENODEV;
559}
1da177e4 560
84e2d340
DB		 561static int multi_config(struct pcmcia_device *link)
562{
563 struct serial_info *info = link->priv;
564 int i, base2 = 0;
1da177e4
LT		 565
566 /* First, look for a generic full-sized window */
567 link->io.NumPorts1 = info->multi * 8;
84e2d340
DB		 568 if (pcmcia_loop_config(link, multi_config_check, &base2)) {
569 /* If that didn't work, look for two windows */
1da177e4
LT		 570 link->io.NumPorts1 = link->io.NumPorts2 = 8;
571 info->multi = 2;
84e2d340
DB		 572 if (pcmcia_loop_config(link, multi_config_check_notpicky,
573 &base2)) {
574 printk(KERN_NOTICE "serial_cs: no usable port range"
575 "found, giving up\n");
576 return -ENODEV;
1da177e4
LT		 577 }
578 }
579
fba395ee 580 i = pcmcia_request_irq(link, &link->irq);
4c89e88b 581 if (i != 0) {
84e2d340 582 /* FIXME: comment does not fit, error handling does not fit */
1da177e4
LT		 583 printk(KERN_NOTICE
584 "serial_cs: no usable port range found, giving up\n");
1da177e4
LT		 585 link->irq.AssignedIRQ = 0;
586 }
efd92dfa
RK		 587
588 /*
589 * Apply any configuration quirks.
590 */
591 if (info->quirk && info->quirk->config)
592 info->quirk->config(link);
593
fba395ee 594 i = pcmcia_request_configuration(link, &link->conf);
9ec0bf41 595 if (i != 0)
84e2d340 596 return -ENODEV;
1da177e4
LT		 597
598 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
30bac7aa
PV		 599 * 8 registers are for the UART, the others are extra registers.
600 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
601 */
602 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
603 info->prodid == PRODID_POSSIO_GCC)) {
604 int err;
605
84e2d340
DB		 606 if (link->conf.ConfigIndex == 1 ||
607 link->conf.ConfigIndex == 3) {
30bac7aa
PV		 608 err = setup_serial(link, info, base2,
609 link->irq.AssignedIRQ);
610 base2 = link->io.BasePort1;
1da177e4 611 } else {
30bac7aa
PV		 612 err = setup_serial(link, info, link->io.BasePort1,
613 link->irq.AssignedIRQ);
1da177e4 614 }
30bac7aa 615 info->c950ctrl = base2;
7ef057fa
RK		 616
617 /*
618 * FIXME: We really should wake up the port prior to
619 * handing it over to the serial layer.
620 */
621 if (info->quirk && info->quirk->wakeup)
622 info->quirk->wakeup(link);
623
84e2d340 624 return 0;
1da177e4
LT		 625 }
626
fba395ee 627 setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
1da177e4 628 for (i = 0; i < info->multi - 1; i++)
fba395ee 629 setup_serial(link, info, base2 + (8 * i),
16f31113 630 link->irq.AssignedIRQ);
84e2d340 631 return 0;
1da177e4
LT		 632}
633
6ae3b84d
DB		 634static int serial_check_for_multi(struct pcmcia_device *p_dev,
635 cistpl_cftable_entry_t *cf,
636 cistpl_cftable_entry_t *dflt,
637 unsigned int vcc,
638 void *priv_data)
639{
640 struct serial_info *info = p_dev->priv;
641
642 if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
643 info->multi = cf->io.win[0].len >> 3;
644
645 if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
646 (cf->io.win[1].len == 8))
647 info->multi = 2;
648
649 return 0; /* break */
650}
651
652
1da177e4
LT		 653/*======================================================================
654
655 serial_config() is scheduled to run after a CARD_INSERTION event
656 is received, to configure the PCMCIA socket, and to make the
657 serial device available to the system.
658
659======================================================================*/
660
15b99ac1 661static int serial_config(struct pcmcia_device * link)
1da177e4 662{
1da177e4 663 struct serial_info *info = link->priv;
6ae3b84d 664 int i;
16f31113 665
9ec0bf41 666 dev_dbg(&link->dev, "serial_config\n");
f0a3a153 667
1da177e4 668 /* Is this a compliant multifunction card? */
6ae3b84d 669 info->multi = (link->socket->functions > 1);
1da177e4
LT		 670
671 /* Is this a multiport card? */
efd50585
DB		 672 info->manfid = link->manf_id;
673 info->prodid = link->card_id;
674
675 for (i = 0; i < ARRAY_SIZE(quirks); i++)
676 if ((quirks[i].manfid == ~0 ||
677 quirks[i].manfid == info->manfid) &&
678 (quirks[i].prodid == ~0 ||
679 quirks[i].prodid == info->prodid)) {
680 info->quirk = &quirks[i];
681 break;
682 }
1da177e4
LT		 683
684 /* Another check for dual-serial cards: look for either serial or
685 multifunction cards that ask for appropriate IO port ranges */
1da177e4 686 if ((info->multi == 0) &&
efd50585
DB		 687 (link->has_func_id) &&
688 ((link->func_id == CISTPL_FUNCID_MULTI) ||
6ae3b84d
DB		 689 (link->func_id == CISTPL_FUNCID_SERIAL)))
690 pcmcia_loop_config(link, serial_check_for_multi, info);
1da177e4 691
1fbbac4b
RK		 692 /*
693 * Apply any multi-port quirk.
694 */
695 if (info->quirk && info->quirk->multi != -1)
696 info->multi = info->quirk->multi;
697
1da177e4
LT		 698 if (info->multi > 1)
699 multi_config(link);
700 else
701 simple_config(link);
702
703 if (info->ndev == 0)
704 goto failed;
705
eee3a883
RK		 706 /*
707 * Apply any post-init quirk. FIXME: This should really happen
708 * before we register the port, since it might already be in use.
709 */
710 if (info->quirk && info->quirk->post)
711 if (info->quirk->post(link))
712 goto failed;
1da177e4 713
fd238232 714 link->dev_node = &info->node[0];
15b99ac1 715 return 0;
1da177e4 716
f0a3a153 717failed:
1da177e4 718 serial_remove(link);
15b99ac1 719 return -ENODEV;
1da177e4
LT		 720}
721
325aa29f
DB		 722static struct pcmcia_device_id serial_ids[] = {
723 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
724 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
725 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
726 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
727 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
728 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
729 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
730 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
731 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
732 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
733 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
734 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
f4d7510d
JK		 735 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
736 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
325aa29f
DB		 737 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
738 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
739 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
740 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
741 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
742 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
743 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
744 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
745 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
d277ad0e 746 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
325aa29f
DB		 747 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
748 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
749 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
750 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
751 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
752 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
40738f3f
K		 753 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
754 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
d277ad0e
K		 755 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
756 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
325aa29f
DB		 757 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
758 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
759 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
d277ad0e 760 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
33d7959a 761 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
40738f3f
K		 762 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
763 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
325aa29f
DB		 764 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
765 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
766 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
767 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
768 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
769 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
770 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
771 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
772 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
773 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
774 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
1de9cedf 775 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
325aa29f
DB		 776 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
777 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
778 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
779 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
780 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
781 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
782 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
783 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
784 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
785 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
786 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
787 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
788 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
789 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
790 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
791 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
792 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
793 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
1de9cedf 794 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
325aa29f
DB		 795 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
796 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
797 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
798 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
799 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
800 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
801 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
802 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
d277ad0e 803 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
325aa29f
DB		 804 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
805 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
806 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
807 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
808 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
809 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
810 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
bb289bc4 811 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
531afd64
KK		 812 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
813 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
814 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
815 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
816 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
bf6fda63
KK		 817 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
818 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
f0a3a153 819 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
bf6fda63 820 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
f0a3a153
KK		 821 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
822 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
63ca2d74 823 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
abe88069 824 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
63ca2d74
KK		 825 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
826 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
827 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
531afd64 828 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
bf6fda63
KK		 829 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
830 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
831 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
531afd64 832 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
abe88069 833 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
44e5e33e
TO		 834 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
835 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
836 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
837 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
838 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
839 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
840 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
841 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
842 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
843 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
844 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
845 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
846 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
847 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
848 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
849 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
850 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
851 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
852 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
853 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
854 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
855 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
856 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
857 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
9d9b7ad7 858 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
325aa29f
DB		 859 /* too generic */
860 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
861 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
862 PCMCIA_DEVICE_FUNC_ID(2),
863 PCMCIA_DEVICE_NULL,
864};
865MODULE_DEVICE_TABLE(pcmcia, serial_ids);
866
abe88069
KK		 867MODULE_FIRMWARE("cis/PCMLM28.cis");
868MODULE_FIRMWARE("cis/DP83903.cis");
869MODULE_FIRMWARE("cis/3CCFEM556.cis");
870MODULE_FIRMWARE("cis/3CXEM556.cis");
871MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
872MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
873MODULE_FIRMWARE("cis/SW_555_SER.cis");
874MODULE_FIRMWARE("cis/MT5634ZLX.cis");
875MODULE_FIRMWARE("cis/COMpad2.cis");
876MODULE_FIRMWARE("cis/COMpad4.cis");
877MODULE_FIRMWARE("cis/RS-COM-2P.cis");
878
1da177e4
LT		 879static struct pcmcia_driver serial_cs_driver = {
880 .owner = THIS_MODULE,
881 .drv = {
882 .name = "serial_cs",
883 },
f8cfa618 884 .probe = serial_probe,
cc3b4866 885 .remove = serial_detach,
325aa29f 886 .id_table = serial_ids,
98e4c28b
DB		 887 .suspend = serial_suspend,
888 .resume = serial_resume,
1da177e4
LT		 889};
890
891static int __init init_serial_cs(void)
892{
893 return pcmcia_register_driver(&serial_cs_driver);
894}
895
896static void __exit exit_serial_cs(void)
897{
898 pcmcia_unregister_driver(&serial_cs_driver);
1da177e4
LT		 899}
900
901module_init(init_serial_cs);
902module_exit(exit_serial_cs);
903
904MODULE_LICENSE("GPL");
Linux 6.x block layer and io_uring tree(s)