Commit | Line | Data |
---|---|---|
194de561 | 1 | /* |
1ba7a3ee | 2 | * Blackfin On-Chip Serial Driver |
194de561 | 3 | * |
d273e201 | 4 | * Copyright 2006-2008 Analog Devices Inc. |
194de561 | 5 | * |
1ba7a3ee | 6 | * Enter bugs at http://blackfin.uclinux.org/ |
194de561 | 7 | * |
1ba7a3ee | 8 | * Licensed under the GPL-2 or later. |
194de561 BW |
9 | */ |
10 | ||
11 | #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
12 | #define SUPPORT_SYSRQ | |
13 | #endif | |
14 | ||
15 | #include <linux/module.h> | |
16 | #include <linux/ioport.h> | |
17 | #include <linux/init.h> | |
18 | #include <linux/console.h> | |
19 | #include <linux/sysrq.h> | |
20 | #include <linux/platform_device.h> | |
21 | #include <linux/tty.h> | |
22 | #include <linux/tty_flip.h> | |
23 | #include <linux/serial_core.h> | |
24 | ||
474f1a66 SZ |
25 | #ifdef CONFIG_KGDB_UART |
26 | #include <linux/kgdb.h> | |
27 | #include <asm/irq_regs.h> | |
28 | #endif | |
29 | ||
194de561 | 30 | #include <asm/gpio.h> |
639f6571 | 31 | #include <mach/bfin_serial_5xx.h> |
194de561 BW |
32 | |
33 | #ifdef CONFIG_SERIAL_BFIN_DMA | |
34 | #include <linux/dma-mapping.h> | |
35 | #include <asm/io.h> | |
36 | #include <asm/irq.h> | |
37 | #include <asm/cacheflush.h> | |
38 | #endif | |
39 | ||
40 | /* UART name and device definitions */ | |
41 | #define BFIN_SERIAL_NAME "ttyBF" | |
42 | #define BFIN_SERIAL_MAJOR 204 | |
43 | #define BFIN_SERIAL_MINOR 64 | |
44 | ||
c9607ecc MF |
45 | static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; |
46 | static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource); | |
47 | ||
194de561 BW |
48 | /* |
49 | * Setup for console. Argument comes from the menuconfig | |
50 | */ | |
51 | #define DMA_RX_XCOUNT 512 | |
52 | #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) | |
53 | ||
0aef4564 | 54 | #define DMA_RX_FLUSH_JIFFIES (HZ / 50) |
f30ac0ce | 55 | #define CTS_CHECK_JIFFIES (HZ / 50) |
194de561 BW |
56 | |
57 | #ifdef CONFIG_SERIAL_BFIN_DMA | |
58 | static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); | |
59 | #else | |
194de561 | 60 | static void bfin_serial_tx_chars(struct bfin_serial_port *uart); |
194de561 BW |
61 | #endif |
62 | ||
63 | static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); | |
64 | ||
65 | /* | |
66 | * interrupts are disabled on entry | |
67 | */ | |
68 | static void bfin_serial_stop_tx(struct uart_port *port) | |
69 | { | |
70 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
0711d857 | 71 | struct circ_buf *xmit = &uart->port.info->xmit; |
194de561 | 72 | |
f4d640c9 | 73 | while (!(UART_GET_LSR(uart) & TEMT)) |
0711d857 | 74 | cpu_relax(); |
f4d640c9 | 75 | |
194de561 BW |
76 | #ifdef CONFIG_SERIAL_BFIN_DMA |
77 | disable_dma(uart->tx_dma_channel); | |
0711d857 SZ |
78 | xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); |
79 | uart->port.icount.tx += uart->tx_count; | |
80 | uart->tx_count = 0; | |
81 | uart->tx_done = 1; | |
f4d640c9 RH |
82 | #else |
83 | #ifdef CONFIG_BF54x | |
f4d640c9 RH |
84 | /* Clear TFI bit */ |
85 | UART_PUT_LSR(uart, TFI); | |
194de561 | 86 | #endif |
89bf6dc5 | 87 | UART_CLEAR_IER(uart, ETBEI); |
f4d640c9 | 88 | #endif |
194de561 BW |
89 | } |
90 | ||
91 | /* | |
92 | * port is locked and interrupts are disabled | |
93 | */ | |
94 | static void bfin_serial_start_tx(struct uart_port *port) | |
95 | { | |
96 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
97 | ||
98 | #ifdef CONFIG_SERIAL_BFIN_DMA | |
0711d857 SZ |
99 | if (uart->tx_done) |
100 | bfin_serial_dma_tx_chars(uart); | |
f4d640c9 | 101 | #else |
f4d640c9 | 102 | UART_SET_IER(uart, ETBEI); |
a359cca7 | 103 | bfin_serial_tx_chars(uart); |
f4d640c9 | 104 | #endif |
194de561 BW |
105 | } |
106 | ||
107 | /* | |
108 | * Interrupts are enabled | |
109 | */ | |
110 | static void bfin_serial_stop_rx(struct uart_port *port) | |
111 | { | |
112 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
89bf6dc5 MF |
113 | #ifdef CONFIG_KGDB_UART |
114 | if (uart->port.line != CONFIG_KGDB_UART_PORT) | |
a359cca7 | 115 | #endif |
f4d640c9 | 116 | UART_CLEAR_IER(uart, ERBFI); |
194de561 BW |
117 | } |
118 | ||
119 | /* | |
120 | * Set the modem control timer to fire immediately. | |
121 | */ | |
122 | static void bfin_serial_enable_ms(struct uart_port *port) | |
123 | { | |
124 | } | |
125 | ||
474f1a66 SZ |
126 | #ifdef CONFIG_KGDB_UART |
127 | static int kgdb_entry_state; | |
128 | ||
129 | void kgdb_put_debug_char(int chr) | |
130 | { | |
131 | struct bfin_serial_port *uart; | |
d273e201 | 132 | |
2ade9729 GY |
133 | if (CONFIG_KGDB_UART_PORT < 0 |
134 | || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) | |
474f1a66 SZ |
135 | uart = &bfin_serial_ports[0]; |
136 | else | |
137 | uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; | |
d273e201 | 138 | |
474f1a66 | 139 | while (!(UART_GET_LSR(uart) & THRE)) { |
d5148ffa | 140 | SSYNC(); |
474f1a66 | 141 | } |
a359cca7 | 142 | |
45828b81 | 143 | UART_CLEAR_DLAB(uart); |
474f1a66 | 144 | UART_PUT_CHAR(uart, (unsigned char)chr); |
d5148ffa | 145 | SSYNC(); |
474f1a66 SZ |
146 | } |
147 | ||
148 | int kgdb_get_debug_char(void) | |
149 | { | |
150 | struct bfin_serial_port *uart; | |
151 | unsigned char chr; | |
152 | ||
2ade9729 GY |
153 | if (CONFIG_KGDB_UART_PORT < 0 |
154 | || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) | |
474f1a66 SZ |
155 | uart = &bfin_serial_ports[0]; |
156 | else | |
157 | uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; | |
d273e201 | 158 | |
474f1a66 | 159 | while(!(UART_GET_LSR(uart) & DR)) { |
d5148ffa | 160 | SSYNC(); |
474f1a66 | 161 | } |
45828b81 | 162 | UART_CLEAR_DLAB(uart); |
474f1a66 | 163 | chr = UART_GET_CHAR(uart); |
d5148ffa | 164 | SSYNC(); |
474f1a66 SZ |
165 | |
166 | return chr; | |
167 | } | |
168 | #endif | |
169 | ||
50e2e15a | 170 | #if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) |
8851c71e MF |
171 | # define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) |
172 | # define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) | |
173 | #else | |
174 | # define UART_GET_ANOMALY_THRESHOLD(uart) 0 | |
175 | # define UART_SET_ANOMALY_THRESHOLD(uart, v) | |
176 | #endif | |
177 | ||
194de561 | 178 | #ifdef CONFIG_SERIAL_BFIN_PIO |
194de561 BW |
179 | static void bfin_serial_rx_chars(struct bfin_serial_port *uart) |
180 | { | |
a88487c7 | 181 | struct tty_struct *tty = uart->port.info->port.tty; |
194de561 | 182 | unsigned int status, ch, flg; |
8851c71e | 183 | static struct timeval anomaly_start = { .tv_sec = 0 }; |
194de561 | 184 | |
759eb040 | 185 | status = UART_GET_LSR(uart); |
0bcfd70e MF |
186 | UART_CLEAR_LSR(uart); |
187 | ||
188 | ch = UART_GET_CHAR(uart); | |
194de561 BW |
189 | uart->port.icount.rx++; |
190 | ||
474f1a66 SZ |
191 | #ifdef CONFIG_KGDB_UART |
192 | if (uart->port.line == CONFIG_KGDB_UART_PORT) { | |
89bf6dc5 | 193 | struct pt_regs *regs = get_irq_regs(); |
474f1a66 SZ |
194 | if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */ |
195 | kgdb_breakkey_pressed(regs); | |
196 | return; | |
197 | } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */ | |
198 | kgdb_entry_state = 1; | |
199 | } else if (kgdb_entry_state == 1 && ch == 'q') { | |
200 | kgdb_entry_state = 0; | |
201 | kgdb_breakkey_pressed(regs); | |
202 | return; | |
203 | } else if (ch == 0x3) {/* Ctrl + C */ | |
204 | kgdb_entry_state = 0; | |
205 | kgdb_breakkey_pressed(regs); | |
206 | return; | |
207 | } else { | |
208 | kgdb_entry_state = 0; | |
209 | } | |
210 | } | |
211 | #endif | |
bbf275f0 | 212 | |
50e2e15a | 213 | if (ANOMALY_05000363) { |
8851c71e MF |
214 | /* The BF533 (and BF561) family of processors have a nice anomaly |
215 | * where they continuously generate characters for a "single" break. | |
bbf275f0 | 216 | * We have to basically ignore this flood until the "next" valid |
8851c71e MF |
217 | * character comes across. Due to the nature of the flood, it is |
218 | * not possible to reliably catch bytes that are sent too quickly | |
219 | * after this break. So application code talking to the Blackfin | |
220 | * which sends a break signal must allow at least 1.5 character | |
221 | * times after the end of the break for things to stabilize. This | |
222 | * timeout was picked as it must absolutely be larger than 1 | |
223 | * character time +/- some percent. So 1.5 sounds good. All other | |
224 | * Blackfin families operate properly. Woo. | |
bbf275f0 | 225 | */ |
8851c71e MF |
226 | if (anomaly_start.tv_sec) { |
227 | struct timeval curr; | |
228 | suseconds_t usecs; | |
229 | ||
230 | if ((~ch & (~ch + 1)) & 0xff) | |
231 | goto known_good_char; | |
232 | ||
233 | do_gettimeofday(&curr); | |
234 | if (curr.tv_sec - anomaly_start.tv_sec > 1) | |
235 | goto known_good_char; | |
236 | ||
237 | usecs = 0; | |
238 | if (curr.tv_sec != anomaly_start.tv_sec) | |
239 | usecs += USEC_PER_SEC; | |
240 | usecs += curr.tv_usec - anomaly_start.tv_usec; | |
241 | ||
242 | if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) | |
243 | goto known_good_char; | |
244 | ||
245 | if (ch) | |
246 | anomaly_start.tv_sec = 0; | |
247 | else | |
248 | anomaly_start = curr; | |
249 | ||
250 | return; | |
251 | ||
252 | known_good_char: | |
253 | anomaly_start.tv_sec = 0; | |
bbf275f0 | 254 | } |
194de561 | 255 | } |
194de561 BW |
256 | |
257 | if (status & BI) { | |
50e2e15a | 258 | if (ANOMALY_05000363) |
8851c71e MF |
259 | if (bfin_revid() < 5) |
260 | do_gettimeofday(&anomaly_start); | |
194de561 BW |
261 | uart->port.icount.brk++; |
262 | if (uart_handle_break(&uart->port)) | |
263 | goto ignore_char; | |
9808901b | 264 | status &= ~(PE | FE); |
2ac5ee47 MF |
265 | } |
266 | if (status & PE) | |
194de561 | 267 | uart->port.icount.parity++; |
2ac5ee47 | 268 | if (status & OE) |
194de561 | 269 | uart->port.icount.overrun++; |
2ac5ee47 | 270 | if (status & FE) |
194de561 | 271 | uart->port.icount.frame++; |
2ac5ee47 MF |
272 | |
273 | status &= uart->port.read_status_mask; | |
274 | ||
275 | if (status & BI) | |
276 | flg = TTY_BREAK; | |
277 | else if (status & PE) | |
278 | flg = TTY_PARITY; | |
279 | else if (status & FE) | |
280 | flg = TTY_FRAME; | |
281 | else | |
194de561 BW |
282 | flg = TTY_NORMAL; |
283 | ||
284 | if (uart_handle_sysrq_char(&uart->port, ch)) | |
285 | goto ignore_char; | |
194de561 | 286 | |
2ac5ee47 MF |
287 | uart_insert_char(&uart->port, status, OE, ch, flg); |
288 | ||
289 | ignore_char: | |
290 | tty_flip_buffer_push(tty); | |
194de561 BW |
291 | } |
292 | ||
293 | static void bfin_serial_tx_chars(struct bfin_serial_port *uart) | |
294 | { | |
295 | struct circ_buf *xmit = &uart->port.info->xmit; | |
296 | ||
194de561 BW |
297 | /* |
298 | * Check the modem control lines before | |
299 | * transmitting anything. | |
300 | */ | |
301 | bfin_serial_mctrl_check(uart); | |
302 | ||
303 | if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { | |
5ffdeea2 SZ |
304 | #ifdef CONFIG_BF54x |
305 | /* Clear TFI bit */ | |
306 | UART_PUT_LSR(uart, TFI); | |
307 | #endif | |
308 | UART_CLEAR_IER(uart, ETBEI); | |
194de561 BW |
309 | return; |
310 | } | |
311 | ||
f30ac0ce SZ |
312 | if (uart->port.x_char) { |
313 | UART_PUT_CHAR(uart, uart->port.x_char); | |
314 | uart->port.icount.tx++; | |
315 | uart->port.x_char = 0; | |
316 | } | |
317 | ||
759eb040 SZ |
318 | while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { |
319 | UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); | |
320 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
321 | uart->port.icount.tx++; | |
322 | SSYNC(); | |
323 | } | |
194de561 BW |
324 | |
325 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
326 | uart_write_wakeup(&uart->port); | |
194de561 BW |
327 | } |
328 | ||
5c4e472b AL |
329 | static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) |
330 | { | |
331 | struct bfin_serial_port *uart = dev_id; | |
332 | ||
f4d640c9 | 333 | spin_lock(&uart->port.lock); |
0bcfd70e | 334 | while (UART_GET_LSR(uart) & DR) |
f4d640c9 | 335 | bfin_serial_rx_chars(uart); |
f4d640c9 | 336 | spin_unlock(&uart->port.lock); |
759eb040 | 337 | |
5c4e472b AL |
338 | return IRQ_HANDLED; |
339 | } | |
340 | ||
341 | static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) | |
194de561 BW |
342 | { |
343 | struct bfin_serial_port *uart = dev_id; | |
194de561 | 344 | |
f4d640c9 | 345 | spin_lock(&uart->port.lock); |
0bcfd70e | 346 | if (UART_GET_LSR(uart) & THRE) |
f4d640c9 | 347 | bfin_serial_tx_chars(uart); |
f4d640c9 | 348 | spin_unlock(&uart->port.lock); |
759eb040 | 349 | |
194de561 BW |
350 | return IRQ_HANDLED; |
351 | } | |
4cb4f22b | 352 | #endif |
194de561 | 353 | |
194de561 BW |
354 | #ifdef CONFIG_SERIAL_BFIN_DMA |
355 | static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) | |
356 | { | |
357 | struct circ_buf *xmit = &uart->port.info->xmit; | |
194de561 | 358 | |
194de561 BW |
359 | uart->tx_done = 0; |
360 | ||
f30ac0ce SZ |
361 | /* |
362 | * Check the modem control lines before | |
363 | * transmitting anything. | |
364 | */ | |
365 | bfin_serial_mctrl_check(uart); | |
366 | ||
1b73351c | 367 | if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { |
0711d857 | 368 | uart->tx_count = 0; |
1b73351c SZ |
369 | uart->tx_done = 1; |
370 | return; | |
371 | } | |
372 | ||
194de561 BW |
373 | if (uart->port.x_char) { |
374 | UART_PUT_CHAR(uart, uart->port.x_char); | |
375 | uart->port.icount.tx++; | |
376 | uart->port.x_char = 0; | |
194de561 | 377 | } |
1b73351c | 378 | |
194de561 BW |
379 | uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); |
380 | if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) | |
381 | uart->tx_count = UART_XMIT_SIZE - xmit->tail; | |
382 | blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), | |
383 | (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); | |
384 | set_dma_config(uart->tx_dma_channel, | |
385 | set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, | |
386 | INTR_ON_BUF, | |
387 | DIMENSION_LINEAR, | |
2047e40d MH |
388 | DATA_SIZE_8, |
389 | DMA_SYNC_RESTART)); | |
194de561 BW |
390 | set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); |
391 | set_dma_x_count(uart->tx_dma_channel, uart->tx_count); | |
392 | set_dma_x_modify(uart->tx_dma_channel, 1); | |
393 | enable_dma(uart->tx_dma_channel); | |
99ee7b5f | 394 | |
f4d640c9 | 395 | UART_SET_IER(uart, ETBEI); |
194de561 BW |
396 | } |
397 | ||
2ac5ee47 | 398 | static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) |
194de561 | 399 | { |
a88487c7 | 400 | struct tty_struct *tty = uart->port.info->port.tty; |
194de561 BW |
401 | int i, flg, status; |
402 | ||
403 | status = UART_GET_LSR(uart); | |
0bcfd70e MF |
404 | UART_CLEAR_LSR(uart); |
405 | ||
56f5de8f SZ |
406 | uart->port.icount.rx += |
407 | CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, | |
408 | UART_XMIT_SIZE); | |
194de561 BW |
409 | |
410 | if (status & BI) { | |
411 | uart->port.icount.brk++; | |
412 | if (uart_handle_break(&uart->port)) | |
413 | goto dma_ignore_char; | |
9808901b | 414 | status &= ~(PE | FE); |
2ac5ee47 MF |
415 | } |
416 | if (status & PE) | |
194de561 | 417 | uart->port.icount.parity++; |
2ac5ee47 | 418 | if (status & OE) |
194de561 | 419 | uart->port.icount.overrun++; |
2ac5ee47 | 420 | if (status & FE) |
194de561 | 421 | uart->port.icount.frame++; |
2ac5ee47 MF |
422 | |
423 | status &= uart->port.read_status_mask; | |
424 | ||
425 | if (status & BI) | |
426 | flg = TTY_BREAK; | |
427 | else if (status & PE) | |
428 | flg = TTY_PARITY; | |
429 | else if (status & FE) | |
430 | flg = TTY_FRAME; | |
431 | else | |
194de561 BW |
432 | flg = TTY_NORMAL; |
433 | ||
56f5de8f SZ |
434 | for (i = uart->rx_dma_buf.tail; i != uart->rx_dma_buf.head; i++) { |
435 | if (i >= UART_XMIT_SIZE) | |
436 | i = 0; | |
437 | if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) | |
438 | uart_insert_char(&uart->port, status, OE, | |
439 | uart->rx_dma_buf.buf[i], flg); | |
194de561 | 440 | } |
2ac5ee47 MF |
441 | |
442 | dma_ignore_char: | |
194de561 BW |
443 | tty_flip_buffer_push(tty); |
444 | } | |
445 | ||
446 | void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) | |
447 | { | |
448 | int x_pos, pos; | |
194de561 | 449 | |
56f5de8f SZ |
450 | uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); |
451 | x_pos = get_dma_curr_xcount(uart->rx_dma_channel); | |
452 | uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; | |
453 | if (uart->rx_dma_nrows == DMA_RX_YCOUNT) | |
454 | uart->rx_dma_nrows = 0; | |
455 | x_pos = DMA_RX_XCOUNT - x_pos; | |
194de561 BW |
456 | if (x_pos == DMA_RX_XCOUNT) |
457 | x_pos = 0; | |
458 | ||
459 | pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; | |
56f5de8f SZ |
460 | if (pos != uart->rx_dma_buf.tail) { |
461 | uart->rx_dma_buf.head = pos; | |
194de561 | 462 | bfin_serial_dma_rx_chars(uart); |
56f5de8f | 463 | uart->rx_dma_buf.tail = uart->rx_dma_buf.head; |
194de561 | 464 | } |
0aef4564 | 465 | |
0a278423 | 466 | mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); |
194de561 BW |
467 | } |
468 | ||
469 | static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) | |
470 | { | |
471 | struct bfin_serial_port *uart = dev_id; | |
472 | struct circ_buf *xmit = &uart->port.info->xmit; | |
194de561 BW |
473 | |
474 | spin_lock(&uart->port.lock); | |
475 | if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { | |
194de561 | 476 | disable_dma(uart->tx_dma_channel); |
0711d857 | 477 | clear_dma_irqstat(uart->tx_dma_channel); |
f4d640c9 | 478 | UART_CLEAR_IER(uart, ETBEI); |
0711d857 SZ |
479 | xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); |
480 | uart->port.icount.tx += uart->tx_count; | |
1b73351c | 481 | |
56f5de8f SZ |
482 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
483 | uart_write_wakeup(&uart->port); | |
484 | ||
1b73351c | 485 | bfin_serial_dma_tx_chars(uart); |
194de561 BW |
486 | } |
487 | ||
488 | spin_unlock(&uart->port.lock); | |
489 | return IRQ_HANDLED; | |
490 | } | |
491 | ||
492 | static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) | |
493 | { | |
494 | struct bfin_serial_port *uart = dev_id; | |
495 | unsigned short irqstat; | |
0711d857 | 496 | |
194de561 BW |
497 | spin_lock(&uart->port.lock); |
498 | irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); | |
499 | clear_dma_irqstat(uart->rx_dma_channel); | |
194de561 | 500 | spin_unlock(&uart->port.lock); |
0aef4564 | 501 | |
0a278423 | 502 | mod_timer(&(uart->rx_dma_timer), jiffies); |
0aef4564 | 503 | |
194de561 BW |
504 | return IRQ_HANDLED; |
505 | } | |
506 | #endif | |
507 | ||
508 | /* | |
509 | * Return TIOCSER_TEMT when transmitter is not busy. | |
510 | */ | |
511 | static unsigned int bfin_serial_tx_empty(struct uart_port *port) | |
512 | { | |
513 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
514 | unsigned short lsr; | |
515 | ||
516 | lsr = UART_GET_LSR(uart); | |
517 | if (lsr & TEMT) | |
518 | return TIOCSER_TEMT; | |
519 | else | |
520 | return 0; | |
521 | } | |
522 | ||
523 | static unsigned int bfin_serial_get_mctrl(struct uart_port *port) | |
524 | { | |
525 | #ifdef CONFIG_SERIAL_BFIN_CTSRTS | |
526 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
527 | if (uart->cts_pin < 0) | |
528 | return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; | |
529 | ||
1feaa51d | 530 | if (UART_GET_CTS(uart)) |
194de561 BW |
531 | return TIOCM_DSR | TIOCM_CAR; |
532 | else | |
533 | #endif | |
534 | return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; | |
535 | } | |
536 | ||
537 | static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
538 | { | |
539 | #ifdef CONFIG_SERIAL_BFIN_CTSRTS | |
540 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
541 | if (uart->rts_pin < 0) | |
542 | return; | |
543 | ||
544 | if (mctrl & TIOCM_RTS) | |
1feaa51d | 545 | UART_CLEAR_RTS(uart); |
194de561 | 546 | else |
1feaa51d | 547 | UART_SET_RTS(uart); |
194de561 BW |
548 | #endif |
549 | } | |
550 | ||
551 | /* | |
552 | * Handle any change of modem status signal since we were last called. | |
553 | */ | |
554 | static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) | |
555 | { | |
556 | #ifdef CONFIG_SERIAL_BFIN_CTSRTS | |
557 | unsigned int status; | |
194de561 | 558 | struct uart_info *info = uart->port.info; |
a88487c7 | 559 | struct tty_struct *tty = info->port.tty; |
194de561 BW |
560 | |
561 | status = bfin_serial_get_mctrl(&uart->port); | |
4cb4f22b | 562 | uart_handle_cts_change(&uart->port, status & TIOCM_CTS); |
194de561 BW |
563 | if (!(status & TIOCM_CTS)) { |
564 | tty->hw_stopped = 1; | |
f30ac0ce SZ |
565 | uart->cts_timer.data = (unsigned long)(uart); |
566 | uart->cts_timer.function = (void *)bfin_serial_mctrl_check; | |
567 | uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES; | |
568 | add_timer(&(uart->cts_timer)); | |
194de561 BW |
569 | } else { |
570 | tty->hw_stopped = 0; | |
571 | } | |
194de561 BW |
572 | #endif |
573 | } | |
574 | ||
575 | /* | |
576 | * Interrupts are always disabled. | |
577 | */ | |
578 | static void bfin_serial_break_ctl(struct uart_port *port, int break_state) | |
579 | { | |
cf686762 MF |
580 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; |
581 | u16 lcr = UART_GET_LCR(uart); | |
582 | if (break_state) | |
583 | lcr |= SB; | |
584 | else | |
585 | lcr &= ~SB; | |
586 | UART_PUT_LCR(uart, lcr); | |
587 | SSYNC(); | |
194de561 BW |
588 | } |
589 | ||
590 | static int bfin_serial_startup(struct uart_port *port) | |
591 | { | |
592 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
593 | ||
594 | #ifdef CONFIG_SERIAL_BFIN_DMA | |
595 | dma_addr_t dma_handle; | |
596 | ||
597 | if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { | |
598 | printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); | |
599 | return -EBUSY; | |
600 | } | |
601 | ||
602 | if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { | |
603 | printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); | |
604 | free_dma(uart->rx_dma_channel); | |
605 | return -EBUSY; | |
606 | } | |
607 | ||
608 | set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); | |
609 | set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); | |
610 | ||
611 | uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); | |
612 | uart->rx_dma_buf.head = 0; | |
613 | uart->rx_dma_buf.tail = 0; | |
614 | uart->rx_dma_nrows = 0; | |
615 | ||
616 | set_dma_config(uart->rx_dma_channel, | |
617 | set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, | |
618 | INTR_ON_ROW, DIMENSION_2D, | |
2047e40d MH |
619 | DATA_SIZE_8, |
620 | DMA_SYNC_RESTART)); | |
194de561 BW |
621 | set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); |
622 | set_dma_x_modify(uart->rx_dma_channel, 1); | |
623 | set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); | |
624 | set_dma_y_modify(uart->rx_dma_channel, 1); | |
625 | set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); | |
626 | enable_dma(uart->rx_dma_channel); | |
627 | ||
628 | uart->rx_dma_timer.data = (unsigned long)(uart); | |
629 | uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout; | |
630 | uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; | |
631 | add_timer(&(uart->rx_dma_timer)); | |
632 | #else | |
a359cca7 SZ |
633 | if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, |
634 | "BFIN_UART_RX", uart)) { | |
474f1a66 | 635 | # ifdef CONFIG_KGDB_UART |
a359cca7 | 636 | if (uart->port.line != CONFIG_KGDB_UART_PORT) { |
474f1a66 | 637 | # endif |
194de561 BW |
638 | printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); |
639 | return -EBUSY; | |
a359cca7 SZ |
640 | # ifdef CONFIG_KGDB_UART |
641 | } | |
642 | # endif | |
194de561 BW |
643 | } |
644 | ||
645 | if (request_irq | |
5c4e472b | 646 | (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, |
194de561 BW |
647 | "BFIN_UART_TX", uart)) { |
648 | printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); | |
649 | free_irq(uart->port.irq, uart); | |
650 | return -EBUSY; | |
651 | } | |
652 | #endif | |
f4d640c9 | 653 | UART_SET_IER(uart, ERBFI); |
194de561 BW |
654 | return 0; |
655 | } | |
656 | ||
657 | static void bfin_serial_shutdown(struct uart_port *port) | |
658 | { | |
659 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
660 | ||
661 | #ifdef CONFIG_SERIAL_BFIN_DMA | |
662 | disable_dma(uart->tx_dma_channel); | |
663 | free_dma(uart->tx_dma_channel); | |
664 | disable_dma(uart->rx_dma_channel); | |
665 | free_dma(uart->rx_dma_channel); | |
666 | del_timer(&(uart->rx_dma_timer)); | |
75b780bd | 667 | dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); |
194de561 | 668 | #else |
474f1a66 SZ |
669 | #ifdef CONFIG_KGDB_UART |
670 | if (uart->port.line != CONFIG_KGDB_UART_PORT) | |
671 | #endif | |
194de561 BW |
672 | free_irq(uart->port.irq, uart); |
673 | free_irq(uart->port.irq+1, uart); | |
674 | #endif | |
675 | } | |
676 | ||
677 | static void | |
678 | bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, | |
679 | struct ktermios *old) | |
680 | { | |
681 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
682 | unsigned long flags; | |
683 | unsigned int baud, quot; | |
0c44a86d | 684 | unsigned short val, ier, lcr = 0; |
194de561 BW |
685 | |
686 | switch (termios->c_cflag & CSIZE) { | |
687 | case CS8: | |
688 | lcr = WLS(8); | |
689 | break; | |
690 | case CS7: | |
691 | lcr = WLS(7); | |
692 | break; | |
693 | case CS6: | |
694 | lcr = WLS(6); | |
695 | break; | |
696 | case CS5: | |
697 | lcr = WLS(5); | |
698 | break; | |
699 | default: | |
700 | printk(KERN_ERR "%s: word lengh not supported\n", | |
71cc2c21 | 701 | __func__); |
194de561 BW |
702 | } |
703 | ||
704 | if (termios->c_cflag & CSTOPB) | |
705 | lcr |= STB; | |
19aa6382 | 706 | if (termios->c_cflag & PARENB) |
194de561 | 707 | lcr |= PEN; |
19aa6382 MF |
708 | if (!(termios->c_cflag & PARODD)) |
709 | lcr |= EPS; | |
710 | if (termios->c_cflag & CMSPAR) | |
711 | lcr |= STP; | |
194de561 | 712 | |
2ac5ee47 MF |
713 | port->read_status_mask = OE; |
714 | if (termios->c_iflag & INPCK) | |
715 | port->read_status_mask |= (FE | PE); | |
716 | if (termios->c_iflag & (BRKINT | PARMRK)) | |
717 | port->read_status_mask |= BI; | |
194de561 | 718 | |
2ac5ee47 MF |
719 | /* |
720 | * Characters to ignore | |
721 | */ | |
722 | port->ignore_status_mask = 0; | |
723 | if (termios->c_iflag & IGNPAR) | |
724 | port->ignore_status_mask |= FE | PE; | |
725 | if (termios->c_iflag & IGNBRK) { | |
726 | port->ignore_status_mask |= BI; | |
727 | /* | |
728 | * If we're ignoring parity and break indicators, | |
729 | * ignore overruns too (for real raw support). | |
730 | */ | |
731 | if (termios->c_iflag & IGNPAR) | |
732 | port->ignore_status_mask |= OE; | |
733 | } | |
194de561 BW |
734 | |
735 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); | |
736 | quot = uart_get_divisor(port, baud); | |
737 | spin_lock_irqsave(&uart->port.lock, flags); | |
738 | ||
8851c71e MF |
739 | UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); |
740 | ||
194de561 BW |
741 | /* Disable UART */ |
742 | ier = UART_GET_IER(uart); | |
1feaa51d | 743 | UART_DISABLE_INTS(uart); |
194de561 BW |
744 | |
745 | /* Set DLAB in LCR to Access DLL and DLH */ | |
45828b81 | 746 | UART_SET_DLAB(uart); |
194de561 BW |
747 | |
748 | UART_PUT_DLL(uart, quot & 0xFF); | |
194de561 BW |
749 | UART_PUT_DLH(uart, (quot >> 8) & 0xFF); |
750 | SSYNC(); | |
751 | ||
752 | /* Clear DLAB in LCR to Access THR RBR IER */ | |
45828b81 | 753 | UART_CLEAR_DLAB(uart); |
194de561 BW |
754 | |
755 | UART_PUT_LCR(uart, lcr); | |
756 | ||
757 | /* Enable UART */ | |
1feaa51d | 758 | UART_ENABLE_INTS(uart, ier); |
194de561 BW |
759 | |
760 | val = UART_GET_GCTL(uart); | |
761 | val |= UCEN; | |
762 | UART_PUT_GCTL(uart, val); | |
763 | ||
764 | spin_unlock_irqrestore(&uart->port.lock, flags); | |
765 | } | |
766 | ||
767 | static const char *bfin_serial_type(struct uart_port *port) | |
768 | { | |
769 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
770 | ||
771 | return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; | |
772 | } | |
773 | ||
774 | /* | |
775 | * Release the memory region(s) being used by 'port'. | |
776 | */ | |
777 | static void bfin_serial_release_port(struct uart_port *port) | |
778 | { | |
779 | } | |
780 | ||
781 | /* | |
782 | * Request the memory region(s) being used by 'port'. | |
783 | */ | |
784 | static int bfin_serial_request_port(struct uart_port *port) | |
785 | { | |
786 | return 0; | |
787 | } | |
788 | ||
789 | /* | |
790 | * Configure/autoconfigure the port. | |
791 | */ | |
792 | static void bfin_serial_config_port(struct uart_port *port, int flags) | |
793 | { | |
794 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
795 | ||
796 | if (flags & UART_CONFIG_TYPE && | |
797 | bfin_serial_request_port(&uart->port) == 0) | |
798 | uart->port.type = PORT_BFIN; | |
799 | } | |
800 | ||
801 | /* | |
802 | * Verify the new serial_struct (for TIOCSSERIAL). | |
803 | * The only change we allow are to the flags and type, and | |
804 | * even then only between PORT_BFIN and PORT_UNKNOWN | |
805 | */ | |
806 | static int | |
807 | bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) | |
808 | { | |
809 | return 0; | |
810 | } | |
811 | ||
7d01b475 GY |
812 | /* |
813 | * Enable the IrDA function if tty->ldisc.num is N_IRDA. | |
814 | * In other cases, disable IrDA function. | |
815 | */ | |
3b8458a9 | 816 | static void bfin_serial_set_ldisc(struct uart_port *port) |
7d01b475 | 817 | { |
3b8458a9 | 818 | int line = port->line; |
7d01b475 GY |
819 | unsigned short val; |
820 | ||
a88487c7 | 821 | if (line >= port->info->port.tty->driver->num) |
7d01b475 GY |
822 | return; |
823 | ||
b1cbefe5 | 824 | switch (port->info->port.tty->termios->c_line) { |
7d01b475 GY |
825 | case N_IRDA: |
826 | val = UART_GET_GCTL(&bfin_serial_ports[line]); | |
827 | val |= (IREN | RPOLC); | |
828 | UART_PUT_GCTL(&bfin_serial_ports[line], val); | |
829 | break; | |
830 | default: | |
831 | val = UART_GET_GCTL(&bfin_serial_ports[line]); | |
832 | val &= ~(IREN | RPOLC); | |
833 | UART_PUT_GCTL(&bfin_serial_ports[line], val); | |
834 | } | |
835 | } | |
836 | ||
194de561 BW |
837 | static struct uart_ops bfin_serial_pops = { |
838 | .tx_empty = bfin_serial_tx_empty, | |
839 | .set_mctrl = bfin_serial_set_mctrl, | |
840 | .get_mctrl = bfin_serial_get_mctrl, | |
841 | .stop_tx = bfin_serial_stop_tx, | |
842 | .start_tx = bfin_serial_start_tx, | |
843 | .stop_rx = bfin_serial_stop_rx, | |
844 | .enable_ms = bfin_serial_enable_ms, | |
845 | .break_ctl = bfin_serial_break_ctl, | |
846 | .startup = bfin_serial_startup, | |
847 | .shutdown = bfin_serial_shutdown, | |
848 | .set_termios = bfin_serial_set_termios, | |
3b8458a9 | 849 | .set_ldisc = bfin_serial_set_ldisc, |
194de561 BW |
850 | .type = bfin_serial_type, |
851 | .release_port = bfin_serial_release_port, | |
852 | .request_port = bfin_serial_request_port, | |
853 | .config_port = bfin_serial_config_port, | |
854 | .verify_port = bfin_serial_verify_port, | |
855 | }; | |
856 | ||
857 | static void __init bfin_serial_init_ports(void) | |
858 | { | |
859 | static int first = 1; | |
860 | int i; | |
861 | ||
862 | if (!first) | |
863 | return; | |
864 | first = 0; | |
865 | ||
c9607ecc | 866 | for (i = 0; i < nr_active_ports; i++) { |
194de561 BW |
867 | bfin_serial_ports[i].port.uartclk = get_sclk(); |
868 | bfin_serial_ports[i].port.ops = &bfin_serial_pops; | |
869 | bfin_serial_ports[i].port.line = i; | |
870 | bfin_serial_ports[i].port.iotype = UPIO_MEM; | |
871 | bfin_serial_ports[i].port.membase = | |
872 | (void __iomem *)bfin_serial_resource[i].uart_base_addr; | |
873 | bfin_serial_ports[i].port.mapbase = | |
874 | bfin_serial_resource[i].uart_base_addr; | |
875 | bfin_serial_ports[i].port.irq = | |
876 | bfin_serial_resource[i].uart_irq; | |
877 | bfin_serial_ports[i].port.flags = UPF_BOOT_AUTOCONF; | |
878 | #ifdef CONFIG_SERIAL_BFIN_DMA | |
879 | bfin_serial_ports[i].tx_done = 1; | |
880 | bfin_serial_ports[i].tx_count = 0; | |
881 | bfin_serial_ports[i].tx_dma_channel = | |
882 | bfin_serial_resource[i].uart_tx_dma_channel; | |
883 | bfin_serial_ports[i].rx_dma_channel = | |
884 | bfin_serial_resource[i].uart_rx_dma_channel; | |
885 | init_timer(&(bfin_serial_ports[i].rx_dma_timer)); | |
194de561 BW |
886 | #endif |
887 | #ifdef CONFIG_SERIAL_BFIN_CTSRTS | |
f30ac0ce | 888 | init_timer(&(bfin_serial_ports[i].cts_timer)); |
194de561 BW |
889 | bfin_serial_ports[i].cts_pin = |
890 | bfin_serial_resource[i].uart_cts_pin; | |
891 | bfin_serial_ports[i].rts_pin = | |
892 | bfin_serial_resource[i].uart_rts_pin; | |
893 | #endif | |
894 | bfin_serial_hw_init(&bfin_serial_ports[i]); | |
194de561 | 895 | } |
f4d640c9 | 896 | |
194de561 BW |
897 | } |
898 | ||
899 | #ifdef CONFIG_SERIAL_BFIN_CONSOLE | |
194de561 BW |
900 | /* |
901 | * If the port was already initialised (eg, by a boot loader), | |
902 | * try to determine the current setup. | |
903 | */ | |
904 | static void __init | |
905 | bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, | |
906 | int *parity, int *bits) | |
907 | { | |
908 | unsigned short status; | |
909 | ||
910 | status = UART_GET_IER(uart) & (ERBFI | ETBEI); | |
911 | if (status == (ERBFI | ETBEI)) { | |
912 | /* ok, the port was enabled */ | |
45828b81 | 913 | u16 lcr, dlh, dll; |
194de561 BW |
914 | |
915 | lcr = UART_GET_LCR(uart); | |
916 | ||
917 | *parity = 'n'; | |
918 | if (lcr & PEN) { | |
919 | if (lcr & EPS) | |
920 | *parity = 'e'; | |
921 | else | |
922 | *parity = 'o'; | |
923 | } | |
924 | switch (lcr & 0x03) { | |
925 | case 0: *bits = 5; break; | |
926 | case 1: *bits = 6; break; | |
927 | case 2: *bits = 7; break; | |
928 | case 3: *bits = 8; break; | |
929 | } | |
930 | /* Set DLAB in LCR to Access DLL and DLH */ | |
45828b81 | 931 | UART_SET_DLAB(uart); |
194de561 BW |
932 | |
933 | dll = UART_GET_DLL(uart); | |
934 | dlh = UART_GET_DLH(uart); | |
935 | ||
936 | /* Clear DLAB in LCR to Access THR RBR IER */ | |
45828b81 | 937 | UART_CLEAR_DLAB(uart); |
194de561 BW |
938 | |
939 | *baud = get_sclk() / (16*(dll | dlh << 8)); | |
940 | } | |
71cc2c21 | 941 | pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); |
194de561 | 942 | } |
0ae53640 RG |
943 | #endif |
944 | ||
945 | #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) | |
946 | static struct uart_driver bfin_serial_reg; | |
194de561 BW |
947 | |
948 | static int __init | |
949 | bfin_serial_console_setup(struct console *co, char *options) | |
950 | { | |
951 | struct bfin_serial_port *uart; | |
0ae53640 | 952 | # ifdef CONFIG_SERIAL_BFIN_CONSOLE |
194de561 BW |
953 | int baud = 57600; |
954 | int bits = 8; | |
955 | int parity = 'n'; | |
0ae53640 | 956 | # ifdef CONFIG_SERIAL_BFIN_CTSRTS |
194de561 | 957 | int flow = 'r'; |
0ae53640 | 958 | # else |
194de561 | 959 | int flow = 'n'; |
0ae53640 RG |
960 | # endif |
961 | # endif | |
194de561 BW |
962 | |
963 | /* | |
964 | * Check whether an invalid uart number has been specified, and | |
965 | * if so, search for the first available port that does have | |
966 | * console support. | |
967 | */ | |
c9607ecc | 968 | if (co->index == -1 || co->index >= nr_active_ports) |
194de561 BW |
969 | co->index = 0; |
970 | uart = &bfin_serial_ports[co->index]; | |
971 | ||
0ae53640 | 972 | # ifdef CONFIG_SERIAL_BFIN_CONSOLE |
194de561 BW |
973 | if (options) |
974 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
975 | else | |
976 | bfin_serial_console_get_options(uart, &baud, &parity, &bits); | |
977 | ||
978 | return uart_set_options(&uart->port, co, baud, parity, bits, flow); | |
0ae53640 RG |
979 | # else |
980 | return 0; | |
981 | # endif | |
982 | } | |
983 | #endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || | |
984 | defined (CONFIG_EARLY_PRINTK) */ | |
985 | ||
986 | #ifdef CONFIG_SERIAL_BFIN_CONSOLE | |
987 | static void bfin_serial_console_putchar(struct uart_port *port, int ch) | |
988 | { | |
989 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
990 | while (!(UART_GET_LSR(uart) & THRE)) | |
991 | barrier(); | |
992 | UART_PUT_CHAR(uart, ch); | |
993 | SSYNC(); | |
994 | } | |
995 | ||
996 | /* | |
997 | * Interrupts are disabled on entering | |
998 | */ | |
999 | static void | |
1000 | bfin_serial_console_write(struct console *co, const char *s, unsigned int count) | |
1001 | { | |
1002 | struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; | |
1003 | int flags = 0; | |
1004 | ||
1005 | spin_lock_irqsave(&uart->port.lock, flags); | |
1006 | uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); | |
1007 | spin_unlock_irqrestore(&uart->port.lock, flags); | |
1008 | ||
194de561 BW |
1009 | } |
1010 | ||
194de561 BW |
1011 | static struct console bfin_serial_console = { |
1012 | .name = BFIN_SERIAL_NAME, | |
1013 | .write = bfin_serial_console_write, | |
1014 | .device = uart_console_device, | |
1015 | .setup = bfin_serial_console_setup, | |
1016 | .flags = CON_PRINTBUFFER, | |
1017 | .index = -1, | |
1018 | .data = &bfin_serial_reg, | |
1019 | }; | |
1020 | ||
1021 | static int __init bfin_serial_rs_console_init(void) | |
1022 | { | |
1023 | bfin_serial_init_ports(); | |
1024 | register_console(&bfin_serial_console); | |
474f1a66 SZ |
1025 | #ifdef CONFIG_KGDB_UART |
1026 | kgdb_entry_state = 0; | |
1027 | init_kgdb_uart(); | |
1028 | #endif | |
194de561 BW |
1029 | return 0; |
1030 | } | |
1031 | console_initcall(bfin_serial_rs_console_init); | |
1032 | ||
1033 | #define BFIN_SERIAL_CONSOLE &bfin_serial_console | |
1034 | #else | |
1035 | #define BFIN_SERIAL_CONSOLE NULL | |
0ae53640 RG |
1036 | #endif /* CONFIG_SERIAL_BFIN_CONSOLE */ |
1037 | ||
1038 | ||
1039 | #ifdef CONFIG_EARLY_PRINTK | |
1040 | static __init void early_serial_putc(struct uart_port *port, int ch) | |
1041 | { | |
1042 | unsigned timeout = 0xffff; | |
1043 | struct bfin_serial_port *uart = (struct bfin_serial_port *)port; | |
1044 | ||
1045 | while ((!(UART_GET_LSR(uart) & THRE)) && --timeout) | |
1046 | cpu_relax(); | |
1047 | UART_PUT_CHAR(uart, ch); | |
1048 | } | |
1049 | ||
1050 | static __init void early_serial_write(struct console *con, const char *s, | |
1051 | unsigned int n) | |
1052 | { | |
1053 | struct bfin_serial_port *uart = &bfin_serial_ports[con->index]; | |
1054 | unsigned int i; | |
1055 | ||
1056 | for (i = 0; i < n; i++, s++) { | |
1057 | if (*s == '\n') | |
1058 | early_serial_putc(&uart->port, '\r'); | |
1059 | early_serial_putc(&uart->port, *s); | |
1060 | } | |
1061 | } | |
1062 | ||
c1113400 | 1063 | static struct __initdata console bfin_early_serial_console = { |
0ae53640 RG |
1064 | .name = "early_BFuart", |
1065 | .write = early_serial_write, | |
1066 | .device = uart_console_device, | |
1067 | .flags = CON_PRINTBUFFER, | |
1068 | .setup = bfin_serial_console_setup, | |
1069 | .index = -1, | |
1070 | .data = &bfin_serial_reg, | |
1071 | }; | |
1072 | ||
1073 | struct console __init *bfin_earlyserial_init(unsigned int port, | |
1074 | unsigned int cflag) | |
1075 | { | |
1076 | struct bfin_serial_port *uart; | |
1077 | struct ktermios t; | |
1078 | ||
c9607ecc | 1079 | if (port == -1 || port >= nr_active_ports) |
0ae53640 RG |
1080 | port = 0; |
1081 | bfin_serial_init_ports(); | |
1082 | bfin_early_serial_console.index = port; | |
0ae53640 RG |
1083 | uart = &bfin_serial_ports[port]; |
1084 | t.c_cflag = cflag; | |
1085 | t.c_iflag = 0; | |
1086 | t.c_oflag = 0; | |
1087 | t.c_lflag = ICANON; | |
1088 | t.c_line = port; | |
1089 | bfin_serial_set_termios(&uart->port, &t, &t); | |
1090 | return &bfin_early_serial_console; | |
1091 | } | |
1092 | ||
1093 | #endif /* CONFIG_SERIAL_BFIN_CONSOLE */ | |
194de561 BW |
1094 | |
1095 | static struct uart_driver bfin_serial_reg = { | |
1096 | .owner = THIS_MODULE, | |
1097 | .driver_name = "bfin-uart", | |
1098 | .dev_name = BFIN_SERIAL_NAME, | |
1099 | .major = BFIN_SERIAL_MAJOR, | |
1100 | .minor = BFIN_SERIAL_MINOR, | |
2ade9729 | 1101 | .nr = BFIN_UART_NR_PORTS, |
194de561 BW |
1102 | .cons = BFIN_SERIAL_CONSOLE, |
1103 | }; | |
1104 | ||
1105 | static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state) | |
1106 | { | |
ccfbc3e1 | 1107 | int i; |
194de561 | 1108 | |
c9607ecc | 1109 | for (i = 0; i < nr_active_ports; i++) { |
ccfbc3e1 SZ |
1110 | if (bfin_serial_ports[i].port.dev != &dev->dev) |
1111 | continue; | |
1112 | uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port); | |
1113 | } | |
194de561 BW |
1114 | |
1115 | return 0; | |
1116 | } | |
1117 | ||
1118 | static int bfin_serial_resume(struct platform_device *dev) | |
1119 | { | |
ccfbc3e1 | 1120 | int i; |
194de561 | 1121 | |
c9607ecc | 1122 | for (i = 0; i < nr_active_ports; i++) { |
ccfbc3e1 SZ |
1123 | if (bfin_serial_ports[i].port.dev != &dev->dev) |
1124 | continue; | |
1125 | uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port); | |
1126 | } | |
194de561 BW |
1127 | |
1128 | return 0; | |
1129 | } | |
1130 | ||
1131 | static int bfin_serial_probe(struct platform_device *dev) | |
1132 | { | |
1133 | struct resource *res = dev->resource; | |
1134 | int i; | |
1135 | ||
1136 | for (i = 0; i < dev->num_resources; i++, res++) | |
1137 | if (res->flags & IORESOURCE_MEM) | |
1138 | break; | |
1139 | ||
1140 | if (i < dev->num_resources) { | |
c9607ecc | 1141 | for (i = 0; i < nr_active_ports; i++, res++) { |
194de561 BW |
1142 | if (bfin_serial_ports[i].port.mapbase != res->start) |
1143 | continue; | |
1144 | bfin_serial_ports[i].port.dev = &dev->dev; | |
1145 | uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port); | |
194de561 BW |
1146 | } |
1147 | } | |
1148 | ||
1149 | return 0; | |
1150 | } | |
1151 | ||
ccfbc3e1 | 1152 | static int bfin_serial_remove(struct platform_device *dev) |
194de561 | 1153 | { |
ccfbc3e1 | 1154 | int i; |
194de561 | 1155 | |
c9607ecc | 1156 | for (i = 0; i < nr_active_ports; i++) { |
ccfbc3e1 SZ |
1157 | if (bfin_serial_ports[i].port.dev != &dev->dev) |
1158 | continue; | |
1159 | uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port); | |
1160 | bfin_serial_ports[i].port.dev = NULL; | |
194de561 | 1161 | #ifdef CONFIG_SERIAL_BFIN_CTSRTS |
ccfbc3e1 SZ |
1162 | gpio_free(bfin_serial_ports[i].cts_pin); |
1163 | gpio_free(bfin_serial_ports[i].rts_pin); | |
194de561 | 1164 | #endif |
ccfbc3e1 | 1165 | } |
194de561 BW |
1166 | |
1167 | return 0; | |
1168 | } | |
1169 | ||
1170 | static struct platform_driver bfin_serial_driver = { | |
1171 | .probe = bfin_serial_probe, | |
1172 | .remove = bfin_serial_remove, | |
1173 | .suspend = bfin_serial_suspend, | |
1174 | .resume = bfin_serial_resume, | |
1175 | .driver = { | |
1176 | .name = "bfin-uart", | |
e169c139 | 1177 | .owner = THIS_MODULE, |
194de561 BW |
1178 | }, |
1179 | }; | |
1180 | ||
1181 | static int __init bfin_serial_init(void) | |
1182 | { | |
1183 | int ret; | |
474f1a66 SZ |
1184 | #ifdef CONFIG_KGDB_UART |
1185 | struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; | |
a359cca7 | 1186 | struct ktermios t; |
474f1a66 | 1187 | #endif |
194de561 BW |
1188 | |
1189 | pr_info("Serial: Blackfin serial driver\n"); | |
1190 | ||
1191 | bfin_serial_init_ports(); | |
1192 | ||
1193 | ret = uart_register_driver(&bfin_serial_reg); | |
1194 | if (ret == 0) { | |
1195 | ret = platform_driver_register(&bfin_serial_driver); | |
1196 | if (ret) { | |
1197 | pr_debug("uart register failed\n"); | |
1198 | uart_unregister_driver(&bfin_serial_reg); | |
1199 | } | |
1200 | } | |
474f1a66 SZ |
1201 | #ifdef CONFIG_KGDB_UART |
1202 | if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) { | |
a359cca7 | 1203 | request_irq(uart->port.irq, bfin_serial_rx_int, |
474f1a66 SZ |
1204 | IRQF_DISABLED, "BFIN_UART_RX", uart); |
1205 | pr_info("Request irq for kgdb uart port\n"); | |
a359cca7 | 1206 | UART_SET_IER(uart, ERBFI); |
d5148ffa | 1207 | SSYNC(); |
474f1a66 SZ |
1208 | t.c_cflag = CS8|B57600; |
1209 | t.c_iflag = 0; | |
1210 | t.c_oflag = 0; | |
1211 | t.c_lflag = ICANON; | |
1212 | t.c_line = CONFIG_KGDB_UART_PORT; | |
1213 | bfin_serial_set_termios(&uart->port, &t, &t); | |
1214 | } | |
1215 | #endif | |
194de561 BW |
1216 | return ret; |
1217 | } | |
1218 | ||
1219 | static void __exit bfin_serial_exit(void) | |
1220 | { | |
1221 | platform_driver_unregister(&bfin_serial_driver); | |
1222 | uart_unregister_driver(&bfin_serial_reg); | |
1223 | } | |
1224 | ||
1225 | module_init(bfin_serial_init); | |
1226 | module_exit(bfin_serial_exit); | |
1227 | ||
1228 | MODULE_AUTHOR("Aubrey.Li <aubrey.li@analog.com>"); | |
1229 | MODULE_DESCRIPTION("Blackfin generic serial port driver"); | |
1230 | MODULE_LICENSE("GPL"); | |
1231 | MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); | |
e169c139 | 1232 | MODULE_ALIAS("platform:bfin-uart"); |