Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/char/8250.c | |
3 | * | |
4 | * Driver for 8250/16550-type serial ports | |
5 | * | |
6 | * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. | |
7 | * | |
8 | * Copyright (C) 2001 Russell King. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
1da177e4 LT |
15 | * A note about mapbase / membase |
16 | * | |
17 | * mapbase is the physical address of the IO port. | |
18 | * membase is an 'ioremapped' cookie. | |
19 | */ | |
1da177e4 LT |
20 | |
21 | #if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
22 | #define SUPPORT_SYSRQ | |
23 | #endif | |
24 | ||
25 | #include <linux/module.h> | |
26 | #include <linux/moduleparam.h> | |
27 | #include <linux/ioport.h> | |
28 | #include <linux/init.h> | |
29 | #include <linux/console.h> | |
30 | #include <linux/sysrq.h> | |
1da177e4 | 31 | #include <linux/delay.h> |
d052d1be | 32 | #include <linux/platform_device.h> |
1da177e4 | 33 | #include <linux/tty.h> |
cd3ecad1 | 34 | #include <linux/ratelimit.h> |
1da177e4 LT |
35 | #include <linux/tty_flip.h> |
36 | #include <linux/serial_reg.h> | |
37 | #include <linux/serial_core.h> | |
38 | #include <linux/serial.h> | |
39 | #include <linux/serial_8250.h> | |
78512ece | 40 | #include <linux/nmi.h> |
f392ecfa | 41 | #include <linux/mutex.h> |
5a0e3ad6 | 42 | #include <linux/slab.h> |
1da177e4 LT |
43 | |
44 | #include <asm/io.h> | |
45 | #include <asm/irq.h> | |
46 | ||
47 | #include "8250.h" | |
48 | ||
b70ac771 DM |
49 | #ifdef CONFIG_SPARC |
50 | #include "suncore.h" | |
51 | #endif | |
52 | ||
1da177e4 LT |
53 | /* |
54 | * Configuration: | |
40663cc7 | 55 | * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option |
1da177e4 LT |
56 | * is unsafe when used on edge-triggered interrupts. |
57 | */ | |
408b664a | 58 | static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; |
1da177e4 | 59 | |
a61c2d78 DJ |
60 | static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; |
61 | ||
8440838b DM |
62 | static struct uart_driver serial8250_reg; |
63 | ||
64 | static int serial_index(struct uart_port *port) | |
65 | { | |
66 | return (serial8250_reg.minor - 64) + port->line; | |
67 | } | |
68 | ||
d41a4b51 CE |
69 | static unsigned int skip_txen_test; /* force skip of txen test at init time */ |
70 | ||
1da177e4 LT |
71 | /* |
72 | * Debugging. | |
73 | */ | |
74 | #if 0 | |
75 | #define DEBUG_AUTOCONF(fmt...) printk(fmt) | |
76 | #else | |
77 | #define DEBUG_AUTOCONF(fmt...) do { } while (0) | |
78 | #endif | |
79 | ||
80 | #if 0 | |
81 | #define DEBUG_INTR(fmt...) printk(fmt) | |
82 | #else | |
83 | #define DEBUG_INTR(fmt...) do { } while (0) | |
84 | #endif | |
85 | ||
86 | #define PASS_LIMIT 256 | |
87 | ||
bca47613 DH |
88 | #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) |
89 | ||
90 | ||
1da177e4 LT |
91 | /* |
92 | * We default to IRQ0 for the "no irq" hack. Some | |
93 | * machine types want others as well - they're free | |
94 | * to redefine this in their header file. | |
95 | */ | |
96 | #define is_real_interrupt(irq) ((irq) != 0) | |
97 | ||
1da177e4 LT |
98 | #ifdef CONFIG_SERIAL_8250_DETECT_IRQ |
99 | #define CONFIG_SERIAL_DETECT_IRQ 1 | |
100 | #endif | |
1da177e4 LT |
101 | #ifdef CONFIG_SERIAL_8250_MANY_PORTS |
102 | #define CONFIG_SERIAL_MANY_PORTS 1 | |
103 | #endif | |
104 | ||
105 | /* | |
106 | * HUB6 is always on. This will be removed once the header | |
107 | * files have been cleaned. | |
108 | */ | |
109 | #define CONFIG_HUB6 1 | |
110 | ||
a4ed1e41 | 111 | #include <asm/serial.h> |
1da177e4 LT |
112 | /* |
113 | * SERIAL_PORT_DFNS tells us about built-in ports that have no | |
114 | * standard enumeration mechanism. Platforms that can find all | |
115 | * serial ports via mechanisms like ACPI or PCI need not supply it. | |
116 | */ | |
117 | #ifndef SERIAL_PORT_DFNS | |
118 | #define SERIAL_PORT_DFNS | |
119 | #endif | |
120 | ||
cb3592be | 121 | static const struct old_serial_port old_serial_port[] = { |
1da177e4 LT |
122 | SERIAL_PORT_DFNS /* defined in asm/serial.h */ |
123 | }; | |
124 | ||
026d02a2 | 125 | #define UART_NR CONFIG_SERIAL_8250_NR_UARTS |
1da177e4 LT |
126 | |
127 | #ifdef CONFIG_SERIAL_8250_RSA | |
128 | ||
129 | #define PORT_RSA_MAX 4 | |
130 | static unsigned long probe_rsa[PORT_RSA_MAX]; | |
131 | static unsigned int probe_rsa_count; | |
132 | #endif /* CONFIG_SERIAL_8250_RSA */ | |
133 | ||
134 | struct uart_8250_port { | |
135 | struct uart_port port; | |
136 | struct timer_list timer; /* "no irq" timer */ | |
137 | struct list_head list; /* ports on this IRQ */ | |
4ba5e35d RK |
138 | unsigned short capabilities; /* port capabilities */ |
139 | unsigned short bugs; /* port bugs */ | |
1da177e4 | 140 | unsigned int tx_loadsz; /* transmit fifo load size */ |
1da177e4 LT |
141 | unsigned char acr; |
142 | unsigned char ier; | |
143 | unsigned char lcr; | |
144 | unsigned char mcr; | |
145 | unsigned char mcr_mask; /* mask of user bits */ | |
146 | unsigned char mcr_force; /* mask of forced bits */ | |
b8e7e40a | 147 | unsigned char cur_iotype; /* Running I/O type */ |
ad4c2aa6 CM |
148 | |
149 | /* | |
150 | * Some bits in registers are cleared on a read, so they must | |
151 | * be saved whenever the register is read but the bits will not | |
152 | * be immediately processed. | |
153 | */ | |
154 | #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS | |
155 | unsigned char lsr_saved_flags; | |
156 | #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA | |
157 | unsigned char msr_saved_flags; | |
1da177e4 LT |
158 | }; |
159 | ||
160 | struct irq_info { | |
25db8ad5 AC |
161 | struct hlist_node node; |
162 | int irq; | |
163 | spinlock_t lock; /* Protects list not the hash */ | |
1da177e4 LT |
164 | struct list_head *head; |
165 | }; | |
166 | ||
25db8ad5 AC |
167 | #define NR_IRQ_HASH 32 /* Can be adjusted later */ |
168 | static struct hlist_head irq_lists[NR_IRQ_HASH]; | |
169 | static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ | |
1da177e4 LT |
170 | |
171 | /* | |
172 | * Here we define the default xmit fifo size used for each type of UART. | |
173 | */ | |
174 | static const struct serial8250_config uart_config[] = { | |
175 | [PORT_UNKNOWN] = { | |
176 | .name = "unknown", | |
177 | .fifo_size = 1, | |
178 | .tx_loadsz = 1, | |
179 | }, | |
180 | [PORT_8250] = { | |
181 | .name = "8250", | |
182 | .fifo_size = 1, | |
183 | .tx_loadsz = 1, | |
184 | }, | |
185 | [PORT_16450] = { | |
186 | .name = "16450", | |
187 | .fifo_size = 1, | |
188 | .tx_loadsz = 1, | |
189 | }, | |
190 | [PORT_16550] = { | |
191 | .name = "16550", | |
192 | .fifo_size = 1, | |
193 | .tx_loadsz = 1, | |
194 | }, | |
195 | [PORT_16550A] = { | |
196 | .name = "16550A", | |
197 | .fifo_size = 16, | |
198 | .tx_loadsz = 16, | |
199 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
200 | .flags = UART_CAP_FIFO, | |
201 | }, | |
202 | [PORT_CIRRUS] = { | |
203 | .name = "Cirrus", | |
204 | .fifo_size = 1, | |
205 | .tx_loadsz = 1, | |
206 | }, | |
207 | [PORT_16650] = { | |
208 | .name = "ST16650", | |
209 | .fifo_size = 1, | |
210 | .tx_loadsz = 1, | |
211 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, | |
212 | }, | |
213 | [PORT_16650V2] = { | |
214 | .name = "ST16650V2", | |
215 | .fifo_size = 32, | |
216 | .tx_loadsz = 16, | |
217 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | | |
218 | UART_FCR_T_TRIG_00, | |
219 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, | |
220 | }, | |
221 | [PORT_16750] = { | |
222 | .name = "TI16750", | |
223 | .fifo_size = 64, | |
224 | .tx_loadsz = 64, | |
225 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | | |
226 | UART_FCR7_64BYTE, | |
227 | .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, | |
228 | }, | |
229 | [PORT_STARTECH] = { | |
230 | .name = "Startech", | |
231 | .fifo_size = 1, | |
232 | .tx_loadsz = 1, | |
233 | }, | |
234 | [PORT_16C950] = { | |
235 | .name = "16C950/954", | |
236 | .fifo_size = 128, | |
237 | .tx_loadsz = 128, | |
238 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
7a56aa45 | 239 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, |
1da177e4 LT |
240 | }, |
241 | [PORT_16654] = { | |
242 | .name = "ST16654", | |
243 | .fifo_size = 64, | |
244 | .tx_loadsz = 32, | |
245 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | | |
246 | UART_FCR_T_TRIG_10, | |
247 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, | |
248 | }, | |
249 | [PORT_16850] = { | |
250 | .name = "XR16850", | |
251 | .fifo_size = 128, | |
252 | .tx_loadsz = 128, | |
253 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
254 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, | |
255 | }, | |
256 | [PORT_RSA] = { | |
257 | .name = "RSA", | |
258 | .fifo_size = 2048, | |
259 | .tx_loadsz = 2048, | |
260 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, | |
261 | .flags = UART_CAP_FIFO, | |
262 | }, | |
263 | [PORT_NS16550A] = { | |
264 | .name = "NS16550A", | |
265 | .fifo_size = 16, | |
266 | .tx_loadsz = 16, | |
267 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
268 | .flags = UART_CAP_FIFO | UART_NATSEMI, | |
269 | }, | |
270 | [PORT_XSCALE] = { | |
271 | .name = "XScale", | |
272 | .fifo_size = 32, | |
273 | .tx_loadsz = 32, | |
274 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
275 | .flags = UART_CAP_FIFO | UART_CAP_UUE, | |
276 | }, | |
bd71c182 TK |
277 | [PORT_RM9000] = { |
278 | .name = "RM9000", | |
279 | .fifo_size = 16, | |
280 | .tx_loadsz = 16, | |
281 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
6b06f191 DD |
282 | .flags = UART_CAP_FIFO, |
283 | }, | |
284 | [PORT_OCTEON] = { | |
285 | .name = "OCTEON", | |
286 | .fifo_size = 64, | |
287 | .tx_loadsz = 64, | |
288 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
bd71c182 TK |
289 | .flags = UART_CAP_FIFO, |
290 | }, | |
08e0992f FF |
291 | [PORT_AR7] = { |
292 | .name = "AR7", | |
293 | .fifo_size = 16, | |
294 | .tx_loadsz = 16, | |
295 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, | |
296 | .flags = UART_CAP_FIFO | UART_CAP_AFE, | |
297 | }, | |
235dae5d PL |
298 | [PORT_U6_16550A] = { |
299 | .name = "U6_16550A", | |
300 | .fifo_size = 64, | |
301 | .tx_loadsz = 64, | |
302 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
303 | .flags = UART_CAP_FIFO | UART_CAP_AFE, | |
304 | }, | |
1da177e4 LT |
305 | }; |
306 | ||
12bf3f24 | 307 | #if defined(CONFIG_MIPS_ALCHEMY) |
21c614a7 PA |
308 | |
309 | /* Au1x00 UART hardware has a weird register layout */ | |
310 | static const u8 au_io_in_map[] = { | |
311 | [UART_RX] = 0, | |
312 | [UART_IER] = 2, | |
313 | [UART_IIR] = 3, | |
314 | [UART_LCR] = 5, | |
315 | [UART_MCR] = 6, | |
316 | [UART_LSR] = 7, | |
317 | [UART_MSR] = 8, | |
318 | }; | |
319 | ||
320 | static const u8 au_io_out_map[] = { | |
321 | [UART_TX] = 1, | |
322 | [UART_IER] = 2, | |
323 | [UART_FCR] = 4, | |
324 | [UART_LCR] = 5, | |
325 | [UART_MCR] = 6, | |
326 | }; | |
327 | ||
328 | /* sane hardware needs no mapping */ | |
7d6a07d1 | 329 | static inline int map_8250_in_reg(struct uart_port *p, int offset) |
21c614a7 | 330 | { |
7d6a07d1 | 331 | if (p->iotype != UPIO_AU) |
21c614a7 PA |
332 | return offset; |
333 | return au_io_in_map[offset]; | |
334 | } | |
335 | ||
7d6a07d1 | 336 | static inline int map_8250_out_reg(struct uart_port *p, int offset) |
21c614a7 | 337 | { |
7d6a07d1 | 338 | if (p->iotype != UPIO_AU) |
21c614a7 PA |
339 | return offset; |
340 | return au_io_out_map[offset]; | |
341 | } | |
342 | ||
6f803cd0 | 343 | #elif defined(CONFIG_SERIAL_8250_RM9K) |
bd71c182 TK |
344 | |
345 | static const u8 | |
346 | regmap_in[8] = { | |
347 | [UART_RX] = 0x00, | |
348 | [UART_IER] = 0x0c, | |
349 | [UART_IIR] = 0x14, | |
350 | [UART_LCR] = 0x1c, | |
351 | [UART_MCR] = 0x20, | |
352 | [UART_LSR] = 0x24, | |
353 | [UART_MSR] = 0x28, | |
354 | [UART_SCR] = 0x2c | |
355 | }, | |
356 | regmap_out[8] = { | |
357 | [UART_TX] = 0x04, | |
358 | [UART_IER] = 0x0c, | |
359 | [UART_FCR] = 0x18, | |
360 | [UART_LCR] = 0x1c, | |
361 | [UART_MCR] = 0x20, | |
362 | [UART_LSR] = 0x24, | |
363 | [UART_MSR] = 0x28, | |
364 | [UART_SCR] = 0x2c | |
365 | }; | |
366 | ||
7d6a07d1 | 367 | static inline int map_8250_in_reg(struct uart_port *p, int offset) |
bd71c182 | 368 | { |
7d6a07d1 | 369 | if (p->iotype != UPIO_RM9000) |
bd71c182 TK |
370 | return offset; |
371 | return regmap_in[offset]; | |
372 | } | |
373 | ||
7d6a07d1 | 374 | static inline int map_8250_out_reg(struct uart_port *p, int offset) |
bd71c182 | 375 | { |
7d6a07d1 | 376 | if (p->iotype != UPIO_RM9000) |
bd71c182 TK |
377 | return offset; |
378 | return regmap_out[offset]; | |
379 | } | |
380 | ||
21c614a7 PA |
381 | #else |
382 | ||
383 | /* sane hardware needs no mapping */ | |
384 | #define map_8250_in_reg(up, offset) (offset) | |
385 | #define map_8250_out_reg(up, offset) (offset) | |
386 | ||
387 | #endif | |
388 | ||
7d6a07d1 | 389 | static unsigned int hub6_serial_in(struct uart_port *p, int offset) |
1da177e4 | 390 | { |
7d6a07d1 DD |
391 | offset = map_8250_in_reg(p, offset) << p->regshift; |
392 | outb(p->hub6 - 1 + offset, p->iobase); | |
393 | return inb(p->iobase + 1); | |
394 | } | |
1da177e4 | 395 | |
7d6a07d1 DD |
396 | static void hub6_serial_out(struct uart_port *p, int offset, int value) |
397 | { | |
398 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
399 | outb(p->hub6 - 1 + offset, p->iobase); | |
400 | outb(value, p->iobase + 1); | |
401 | } | |
1da177e4 | 402 | |
7d6a07d1 DD |
403 | static unsigned int mem_serial_in(struct uart_port *p, int offset) |
404 | { | |
405 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
406 | return readb(p->membase + offset); | |
407 | } | |
1da177e4 | 408 | |
7d6a07d1 DD |
409 | static void mem_serial_out(struct uart_port *p, int offset, int value) |
410 | { | |
411 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
412 | writeb(value, p->membase + offset); | |
413 | } | |
414 | ||
415 | static void mem32_serial_out(struct uart_port *p, int offset, int value) | |
416 | { | |
417 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
418 | writel(value, p->membase + offset); | |
419 | } | |
420 | ||
421 | static unsigned int mem32_serial_in(struct uart_port *p, int offset) | |
422 | { | |
423 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
424 | return readl(p->membase + offset); | |
425 | } | |
1da177e4 | 426 | |
7d6a07d1 DD |
427 | static unsigned int au_serial_in(struct uart_port *p, int offset) |
428 | { | |
429 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
430 | return __raw_readl(p->membase + offset); | |
431 | } | |
432 | ||
433 | static void au_serial_out(struct uart_port *p, int offset, int value) | |
434 | { | |
435 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
436 | __raw_writel(value, p->membase + offset); | |
437 | } | |
21c614a7 | 438 | |
7d6a07d1 DD |
439 | static unsigned int tsi_serial_in(struct uart_port *p, int offset) |
440 | { | |
441 | unsigned int tmp; | |
442 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
443 | if (offset == UART_IIR) { | |
444 | tmp = readl(p->membase + (UART_IIR & ~3)); | |
445 | return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ | |
446 | } else | |
447 | return readb(p->membase + offset); | |
448 | } | |
3be91ec7 | 449 | |
7d6a07d1 DD |
450 | static void tsi_serial_out(struct uart_port *p, int offset, int value) |
451 | { | |
452 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
453 | if (!((offset == UART_IER) && (value & UART_IER_UUE))) | |
454 | writeb(value, p->membase + offset); | |
1da177e4 LT |
455 | } |
456 | ||
7d6a07d1 | 457 | static void dwapb_serial_out(struct uart_port *p, int offset, int value) |
1da177e4 | 458 | { |
beab697a | 459 | int save_offset = offset; |
7d6a07d1 DD |
460 | offset = map_8250_out_reg(p, offset) << p->regshift; |
461 | /* Save the LCR value so it can be re-written when a | |
462 | * Busy Detect interrupt occurs. */ | |
463 | if (save_offset == UART_LCR) { | |
464 | struct uart_8250_port *up = (struct uart_8250_port *)p; | |
465 | up->lcr = value; | |
466 | } | |
467 | writeb(value, p->membase + offset); | |
468 | /* Read the IER to ensure any interrupt is cleared before | |
469 | * returning from ISR. */ | |
470 | if (save_offset == UART_TX || save_offset == UART_IER) | |
471 | value = p->serial_in(p, UART_IER); | |
472 | } | |
1da177e4 | 473 | |
7d6a07d1 DD |
474 | static unsigned int io_serial_in(struct uart_port *p, int offset) |
475 | { | |
476 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
477 | return inb(p->iobase + offset); | |
478 | } | |
479 | ||
480 | static void io_serial_out(struct uart_port *p, int offset, int value) | |
481 | { | |
482 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
483 | outb(value, p->iobase + offset); | |
484 | } | |
485 | ||
486 | static void set_io_from_upio(struct uart_port *p) | |
487 | { | |
b8e7e40a | 488 | struct uart_8250_port *up = (struct uart_8250_port *)p; |
7d6a07d1 | 489 | switch (p->iotype) { |
1da177e4 | 490 | case UPIO_HUB6: |
7d6a07d1 DD |
491 | p->serial_in = hub6_serial_in; |
492 | p->serial_out = hub6_serial_out; | |
1da177e4 LT |
493 | break; |
494 | ||
495 | case UPIO_MEM: | |
7d6a07d1 DD |
496 | p->serial_in = mem_serial_in; |
497 | p->serial_out = mem_serial_out; | |
1da177e4 LT |
498 | break; |
499 | ||
bd71c182 | 500 | case UPIO_RM9000: |
1da177e4 | 501 | case UPIO_MEM32: |
7d6a07d1 DD |
502 | p->serial_in = mem32_serial_in; |
503 | p->serial_out = mem32_serial_out; | |
1da177e4 LT |
504 | break; |
505 | ||
21c614a7 | 506 | case UPIO_AU: |
7d6a07d1 DD |
507 | p->serial_in = au_serial_in; |
508 | p->serial_out = au_serial_out; | |
21c614a7 | 509 | break; |
12bf3f24 | 510 | |
3be91ec7 | 511 | case UPIO_TSI: |
7d6a07d1 DD |
512 | p->serial_in = tsi_serial_in; |
513 | p->serial_out = tsi_serial_out; | |
3be91ec7 | 514 | break; |
21c614a7 | 515 | |
beab697a | 516 | case UPIO_DWAPB: |
7d6a07d1 DD |
517 | p->serial_in = mem_serial_in; |
518 | p->serial_out = dwapb_serial_out; | |
beab697a MSJ |
519 | break; |
520 | ||
1da177e4 | 521 | default: |
7d6a07d1 DD |
522 | p->serial_in = io_serial_in; |
523 | p->serial_out = io_serial_out; | |
524 | break; | |
1da177e4 | 525 | } |
b8e7e40a AC |
526 | /* Remember loaded iotype */ |
527 | up->cur_iotype = p->iotype; | |
1da177e4 LT |
528 | } |
529 | ||
40b36daa AW |
530 | static void |
531 | serial_out_sync(struct uart_8250_port *up, int offset, int value) | |
532 | { | |
7d6a07d1 DD |
533 | struct uart_port *p = &up->port; |
534 | switch (p->iotype) { | |
40b36daa AW |
535 | case UPIO_MEM: |
536 | case UPIO_MEM32: | |
40b36daa | 537 | case UPIO_AU: |
beab697a | 538 | case UPIO_DWAPB: |
7d6a07d1 DD |
539 | p->serial_out(p, offset, value); |
540 | p->serial_in(p, UART_LCR); /* safe, no side-effects */ | |
40b36daa AW |
541 | break; |
542 | default: | |
7d6a07d1 | 543 | p->serial_out(p, offset, value); |
40b36daa AW |
544 | } |
545 | } | |
546 | ||
7d6a07d1 DD |
547 | #define serial_in(up, offset) \ |
548 | (up->port.serial_in(&(up)->port, (offset))) | |
549 | #define serial_out(up, offset, value) \ | |
550 | (up->port.serial_out(&(up)->port, (offset), (value))) | |
1da177e4 LT |
551 | /* |
552 | * We used to support using pause I/O for certain machines. We | |
553 | * haven't supported this for a while, but just in case it's badly | |
554 | * needed for certain old 386 machines, I've left these #define's | |
555 | * in.... | |
556 | */ | |
557 | #define serial_inp(up, offset) serial_in(up, offset) | |
558 | #define serial_outp(up, offset, value) serial_out(up, offset, value) | |
559 | ||
b32b19b8 JAH |
560 | /* Uart divisor latch read */ |
561 | static inline int _serial_dl_read(struct uart_8250_port *up) | |
562 | { | |
563 | return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; | |
564 | } | |
565 | ||
566 | /* Uart divisor latch write */ | |
567 | static inline void _serial_dl_write(struct uart_8250_port *up, int value) | |
568 | { | |
569 | serial_outp(up, UART_DLL, value & 0xff); | |
570 | serial_outp(up, UART_DLM, value >> 8 & 0xff); | |
571 | } | |
572 | ||
12bf3f24 | 573 | #if defined(CONFIG_MIPS_ALCHEMY) |
b32b19b8 JAH |
574 | /* Au1x00 haven't got a standard divisor latch */ |
575 | static int serial_dl_read(struct uart_8250_port *up) | |
576 | { | |
577 | if (up->port.iotype == UPIO_AU) | |
578 | return __raw_readl(up->port.membase + 0x28); | |
579 | else | |
580 | return _serial_dl_read(up); | |
581 | } | |
582 | ||
583 | static void serial_dl_write(struct uart_8250_port *up, int value) | |
584 | { | |
585 | if (up->port.iotype == UPIO_AU) | |
586 | __raw_writel(value, up->port.membase + 0x28); | |
587 | else | |
588 | _serial_dl_write(up, value); | |
589 | } | |
6f803cd0 | 590 | #elif defined(CONFIG_SERIAL_8250_RM9K) |
bd71c182 TK |
591 | static int serial_dl_read(struct uart_8250_port *up) |
592 | { | |
593 | return (up->port.iotype == UPIO_RM9000) ? | |
594 | (((__raw_readl(up->port.membase + 0x10) << 8) | | |
595 | (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) : | |
596 | _serial_dl_read(up); | |
597 | } | |
598 | ||
599 | static void serial_dl_write(struct uart_8250_port *up, int value) | |
600 | { | |
601 | if (up->port.iotype == UPIO_RM9000) { | |
602 | __raw_writel(value, up->port.membase + 0x08); | |
603 | __raw_writel(value >> 8, up->port.membase + 0x10); | |
604 | } else { | |
605 | _serial_dl_write(up, value); | |
606 | } | |
607 | } | |
b32b19b8 JAH |
608 | #else |
609 | #define serial_dl_read(up) _serial_dl_read(up) | |
610 | #define serial_dl_write(up, value) _serial_dl_write(up, value) | |
611 | #endif | |
1da177e4 LT |
612 | |
613 | /* | |
614 | * For the 16C950 | |
615 | */ | |
616 | static void serial_icr_write(struct uart_8250_port *up, int offset, int value) | |
617 | { | |
618 | serial_out(up, UART_SCR, offset); | |
619 | serial_out(up, UART_ICR, value); | |
620 | } | |
621 | ||
622 | static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) | |
623 | { | |
624 | unsigned int value; | |
625 | ||
626 | serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); | |
627 | serial_out(up, UART_SCR, offset); | |
628 | value = serial_in(up, UART_ICR); | |
629 | serial_icr_write(up, UART_ACR, up->acr); | |
630 | ||
631 | return value; | |
632 | } | |
633 | ||
634 | /* | |
635 | * FIFO support. | |
636 | */ | |
b5d674ab | 637 | static void serial8250_clear_fifos(struct uart_8250_port *p) |
1da177e4 LT |
638 | { |
639 | if (p->capabilities & UART_CAP_FIFO) { | |
640 | serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); | |
641 | serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | | |
642 | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); | |
643 | serial_outp(p, UART_FCR, 0); | |
644 | } | |
645 | } | |
646 | ||
647 | /* | |
648 | * IER sleep support. UARTs which have EFRs need the "extended | |
649 | * capability" bit enabled. Note that on XR16C850s, we need to | |
650 | * reset LCR to write to IER. | |
651 | */ | |
b5d674ab | 652 | static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) |
1da177e4 LT |
653 | { |
654 | if (p->capabilities & UART_CAP_SLEEP) { | |
655 | if (p->capabilities & UART_CAP_EFR) { | |
656 | serial_outp(p, UART_LCR, 0xBF); | |
657 | serial_outp(p, UART_EFR, UART_EFR_ECB); | |
658 | serial_outp(p, UART_LCR, 0); | |
659 | } | |
660 | serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); | |
661 | if (p->capabilities & UART_CAP_EFR) { | |
662 | serial_outp(p, UART_LCR, 0xBF); | |
663 | serial_outp(p, UART_EFR, 0); | |
664 | serial_outp(p, UART_LCR, 0); | |
665 | } | |
666 | } | |
667 | } | |
668 | ||
669 | #ifdef CONFIG_SERIAL_8250_RSA | |
670 | /* | |
671 | * Attempts to turn on the RSA FIFO. Returns zero on failure. | |
672 | * We set the port uart clock rate if we succeed. | |
673 | */ | |
674 | static int __enable_rsa(struct uart_8250_port *up) | |
675 | { | |
676 | unsigned char mode; | |
677 | int result; | |
678 | ||
679 | mode = serial_inp(up, UART_RSA_MSR); | |
680 | result = mode & UART_RSA_MSR_FIFO; | |
681 | ||
682 | if (!result) { | |
683 | serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); | |
684 | mode = serial_inp(up, UART_RSA_MSR); | |
685 | result = mode & UART_RSA_MSR_FIFO; | |
686 | } | |
687 | ||
688 | if (result) | |
689 | up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; | |
690 | ||
691 | return result; | |
692 | } | |
693 | ||
694 | static void enable_rsa(struct uart_8250_port *up) | |
695 | { | |
696 | if (up->port.type == PORT_RSA) { | |
697 | if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { | |
698 | spin_lock_irq(&up->port.lock); | |
699 | __enable_rsa(up); | |
700 | spin_unlock_irq(&up->port.lock); | |
701 | } | |
702 | if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) | |
703 | serial_outp(up, UART_RSA_FRR, 0); | |
704 | } | |
705 | } | |
706 | ||
707 | /* | |
708 | * Attempts to turn off the RSA FIFO. Returns zero on failure. | |
709 | * It is unknown why interrupts were disabled in here. However, | |
710 | * the caller is expected to preserve this behaviour by grabbing | |
711 | * the spinlock before calling this function. | |
712 | */ | |
713 | static void disable_rsa(struct uart_8250_port *up) | |
714 | { | |
715 | unsigned char mode; | |
716 | int result; | |
717 | ||
718 | if (up->port.type == PORT_RSA && | |
719 | up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { | |
720 | spin_lock_irq(&up->port.lock); | |
721 | ||
722 | mode = serial_inp(up, UART_RSA_MSR); | |
723 | result = !(mode & UART_RSA_MSR_FIFO); | |
724 | ||
725 | if (!result) { | |
726 | serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); | |
727 | mode = serial_inp(up, UART_RSA_MSR); | |
728 | result = !(mode & UART_RSA_MSR_FIFO); | |
729 | } | |
730 | ||
731 | if (result) | |
732 | up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; | |
733 | spin_unlock_irq(&up->port.lock); | |
734 | } | |
735 | } | |
736 | #endif /* CONFIG_SERIAL_8250_RSA */ | |
737 | ||
738 | /* | |
739 | * This is a quickie test to see how big the FIFO is. | |
740 | * It doesn't work at all the time, more's the pity. | |
741 | */ | |
742 | static int size_fifo(struct uart_8250_port *up) | |
743 | { | |
b32b19b8 JAH |
744 | unsigned char old_fcr, old_mcr, old_lcr; |
745 | unsigned short old_dl; | |
1da177e4 LT |
746 | int count; |
747 | ||
748 | old_lcr = serial_inp(up, UART_LCR); | |
749 | serial_outp(up, UART_LCR, 0); | |
750 | old_fcr = serial_inp(up, UART_FCR); | |
751 | old_mcr = serial_inp(up, UART_MCR); | |
752 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | | |
753 | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); | |
754 | serial_outp(up, UART_MCR, UART_MCR_LOOP); | |
755 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
b32b19b8 JAH |
756 | old_dl = serial_dl_read(up); |
757 | serial_dl_write(up, 0x0001); | |
1da177e4 LT |
758 | serial_outp(up, UART_LCR, 0x03); |
759 | for (count = 0; count < 256; count++) | |
760 | serial_outp(up, UART_TX, count); | |
761 | mdelay(20);/* FIXME - schedule_timeout */ | |
762 | for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && | |
763 | (count < 256); count++) | |
764 | serial_inp(up, UART_RX); | |
765 | serial_outp(up, UART_FCR, old_fcr); | |
766 | serial_outp(up, UART_MCR, old_mcr); | |
767 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
b32b19b8 | 768 | serial_dl_write(up, old_dl); |
1da177e4 LT |
769 | serial_outp(up, UART_LCR, old_lcr); |
770 | ||
771 | return count; | |
772 | } | |
773 | ||
774 | /* | |
775 | * Read UART ID using the divisor method - set DLL and DLM to zero | |
776 | * and the revision will be in DLL and device type in DLM. We | |
777 | * preserve the device state across this. | |
778 | */ | |
779 | static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) | |
780 | { | |
781 | unsigned char old_dll, old_dlm, old_lcr; | |
782 | unsigned int id; | |
783 | ||
784 | old_lcr = serial_inp(p, UART_LCR); | |
785 | serial_outp(p, UART_LCR, UART_LCR_DLAB); | |
786 | ||
787 | old_dll = serial_inp(p, UART_DLL); | |
788 | old_dlm = serial_inp(p, UART_DLM); | |
789 | ||
790 | serial_outp(p, UART_DLL, 0); | |
791 | serial_outp(p, UART_DLM, 0); | |
792 | ||
793 | id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; | |
794 | ||
795 | serial_outp(p, UART_DLL, old_dll); | |
796 | serial_outp(p, UART_DLM, old_dlm); | |
797 | serial_outp(p, UART_LCR, old_lcr); | |
798 | ||
799 | return id; | |
800 | } | |
801 | ||
802 | /* | |
803 | * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. | |
804 | * When this function is called we know it is at least a StarTech | |
805 | * 16650 V2, but it might be one of several StarTech UARTs, or one of | |
806 | * its clones. (We treat the broken original StarTech 16650 V1 as a | |
807 | * 16550, and why not? Startech doesn't seem to even acknowledge its | |
808 | * existence.) | |
bd71c182 | 809 | * |
1da177e4 LT |
810 | * What evil have men's minds wrought... |
811 | */ | |
812 | static void autoconfig_has_efr(struct uart_8250_port *up) | |
813 | { | |
814 | unsigned int id1, id2, id3, rev; | |
815 | ||
816 | /* | |
817 | * Everything with an EFR has SLEEP | |
818 | */ | |
819 | up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; | |
820 | ||
821 | /* | |
822 | * First we check to see if it's an Oxford Semiconductor UART. | |
823 | * | |
824 | * If we have to do this here because some non-National | |
825 | * Semiconductor clone chips lock up if you try writing to the | |
826 | * LSR register (which serial_icr_read does) | |
827 | */ | |
828 | ||
829 | /* | |
830 | * Check for Oxford Semiconductor 16C950. | |
831 | * | |
832 | * EFR [4] must be set else this test fails. | |
833 | * | |
834 | * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) | |
835 | * claims that it's needed for 952 dual UART's (which are not | |
836 | * recommended for new designs). | |
837 | */ | |
838 | up->acr = 0; | |
839 | serial_out(up, UART_LCR, 0xBF); | |
840 | serial_out(up, UART_EFR, UART_EFR_ECB); | |
841 | serial_out(up, UART_LCR, 0x00); | |
842 | id1 = serial_icr_read(up, UART_ID1); | |
843 | id2 = serial_icr_read(up, UART_ID2); | |
844 | id3 = serial_icr_read(up, UART_ID3); | |
845 | rev = serial_icr_read(up, UART_REV); | |
846 | ||
847 | DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); | |
848 | ||
849 | if (id1 == 0x16 && id2 == 0xC9 && | |
850 | (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { | |
851 | up->port.type = PORT_16C950; | |
4ba5e35d RK |
852 | |
853 | /* | |
854 | * Enable work around for the Oxford Semiconductor 952 rev B | |
855 | * chip which causes it to seriously miscalculate baud rates | |
856 | * when DLL is 0. | |
857 | */ | |
858 | if (id3 == 0x52 && rev == 0x01) | |
859 | up->bugs |= UART_BUG_QUOT; | |
1da177e4 LT |
860 | return; |
861 | } | |
bd71c182 | 862 | |
1da177e4 LT |
863 | /* |
864 | * We check for a XR16C850 by setting DLL and DLM to 0, and then | |
865 | * reading back DLL and DLM. The chip type depends on the DLM | |
866 | * value read back: | |
867 | * 0x10 - XR16C850 and the DLL contains the chip revision. | |
868 | * 0x12 - XR16C2850. | |
869 | * 0x14 - XR16C854. | |
870 | */ | |
871 | id1 = autoconfig_read_divisor_id(up); | |
872 | DEBUG_AUTOCONF("850id=%04x ", id1); | |
873 | ||
874 | id2 = id1 >> 8; | |
875 | if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { | |
1da177e4 LT |
876 | up->port.type = PORT_16850; |
877 | return; | |
878 | } | |
879 | ||
880 | /* | |
881 | * It wasn't an XR16C850. | |
882 | * | |
883 | * We distinguish between the '654 and the '650 by counting | |
884 | * how many bytes are in the FIFO. I'm using this for now, | |
885 | * since that's the technique that was sent to me in the | |
886 | * serial driver update, but I'm not convinced this works. | |
887 | * I've had problems doing this in the past. -TYT | |
888 | */ | |
889 | if (size_fifo(up) == 64) | |
890 | up->port.type = PORT_16654; | |
891 | else | |
892 | up->port.type = PORT_16650V2; | |
893 | } | |
894 | ||
895 | /* | |
896 | * We detected a chip without a FIFO. Only two fall into | |
897 | * this category - the original 8250 and the 16450. The | |
898 | * 16450 has a scratch register (accessible with LCR=0) | |
899 | */ | |
900 | static void autoconfig_8250(struct uart_8250_port *up) | |
901 | { | |
902 | unsigned char scratch, status1, status2; | |
903 | ||
904 | up->port.type = PORT_8250; | |
905 | ||
906 | scratch = serial_in(up, UART_SCR); | |
907 | serial_outp(up, UART_SCR, 0xa5); | |
908 | status1 = serial_in(up, UART_SCR); | |
909 | serial_outp(up, UART_SCR, 0x5a); | |
910 | status2 = serial_in(up, UART_SCR); | |
911 | serial_outp(up, UART_SCR, scratch); | |
912 | ||
913 | if (status1 == 0xa5 && status2 == 0x5a) | |
914 | up->port.type = PORT_16450; | |
915 | } | |
916 | ||
917 | static int broken_efr(struct uart_8250_port *up) | |
918 | { | |
919 | /* | |
920 | * Exar ST16C2550 "A2" devices incorrectly detect as | |
921 | * having an EFR, and report an ID of 0x0201. See | |
631dd1a8 | 922 | * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html |
1da177e4 LT |
923 | */ |
924 | if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) | |
925 | return 1; | |
926 | ||
927 | return 0; | |
928 | } | |
929 | ||
930 | /* | |
931 | * We know that the chip has FIFOs. Does it have an EFR? The | |
932 | * EFR is located in the same register position as the IIR and | |
933 | * we know the top two bits of the IIR are currently set. The | |
934 | * EFR should contain zero. Try to read the EFR. | |
935 | */ | |
936 | static void autoconfig_16550a(struct uart_8250_port *up) | |
937 | { | |
938 | unsigned char status1, status2; | |
939 | unsigned int iersave; | |
940 | ||
941 | up->port.type = PORT_16550A; | |
942 | up->capabilities |= UART_CAP_FIFO; | |
943 | ||
944 | /* | |
945 | * Check for presence of the EFR when DLAB is set. | |
946 | * Only ST16C650V1 UARTs pass this test. | |
947 | */ | |
948 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
949 | if (serial_in(up, UART_EFR) == 0) { | |
950 | serial_outp(up, UART_EFR, 0xA8); | |
951 | if (serial_in(up, UART_EFR) != 0) { | |
952 | DEBUG_AUTOCONF("EFRv1 "); | |
953 | up->port.type = PORT_16650; | |
954 | up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; | |
955 | } else { | |
956 | DEBUG_AUTOCONF("Motorola 8xxx DUART "); | |
957 | } | |
958 | serial_outp(up, UART_EFR, 0); | |
959 | return; | |
960 | } | |
961 | ||
962 | /* | |
963 | * Maybe it requires 0xbf to be written to the LCR. | |
964 | * (other ST16C650V2 UARTs, TI16C752A, etc) | |
965 | */ | |
966 | serial_outp(up, UART_LCR, 0xBF); | |
967 | if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { | |
968 | DEBUG_AUTOCONF("EFRv2 "); | |
969 | autoconfig_has_efr(up); | |
970 | return; | |
971 | } | |
972 | ||
973 | /* | |
974 | * Check for a National Semiconductor SuperIO chip. | |
975 | * Attempt to switch to bank 2, read the value of the LOOP bit | |
976 | * from EXCR1. Switch back to bank 0, change it in MCR. Then | |
977 | * switch back to bank 2, read it from EXCR1 again and check | |
978 | * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 | |
1da177e4 LT |
979 | */ |
980 | serial_outp(up, UART_LCR, 0); | |
981 | status1 = serial_in(up, UART_MCR); | |
982 | serial_outp(up, UART_LCR, 0xE0); | |
983 | status2 = serial_in(up, 0x02); /* EXCR1 */ | |
984 | ||
985 | if (!((status2 ^ status1) & UART_MCR_LOOP)) { | |
986 | serial_outp(up, UART_LCR, 0); | |
987 | serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); | |
988 | serial_outp(up, UART_LCR, 0xE0); | |
989 | status2 = serial_in(up, 0x02); /* EXCR1 */ | |
990 | serial_outp(up, UART_LCR, 0); | |
991 | serial_outp(up, UART_MCR, status1); | |
992 | ||
993 | if ((status2 ^ status1) & UART_MCR_LOOP) { | |
857dde2e DW |
994 | unsigned short quot; |
995 | ||
1da177e4 | 996 | serial_outp(up, UART_LCR, 0xE0); |
857dde2e | 997 | |
b32b19b8 | 998 | quot = serial_dl_read(up); |
857dde2e DW |
999 | quot <<= 3; |
1000 | ||
b5b82df6 | 1001 | status1 = serial_in(up, 0x04); /* EXCR2 */ |
1da177e4 LT |
1002 | status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ |
1003 | status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ | |
1004 | serial_outp(up, 0x04, status1); | |
bd71c182 | 1005 | |
b32b19b8 | 1006 | serial_dl_write(up, quot); |
857dde2e | 1007 | |
1da177e4 | 1008 | serial_outp(up, UART_LCR, 0); |
1da177e4 | 1009 | |
857dde2e | 1010 | up->port.uartclk = 921600*16; |
1da177e4 LT |
1011 | up->port.type = PORT_NS16550A; |
1012 | up->capabilities |= UART_NATSEMI; | |
1013 | return; | |
1014 | } | |
1015 | } | |
1016 | ||
1017 | /* | |
1018 | * No EFR. Try to detect a TI16750, which only sets bit 5 of | |
1019 | * the IIR when 64 byte FIFO mode is enabled when DLAB is set. | |
1020 | * Try setting it with and without DLAB set. Cheap clones | |
1021 | * set bit 5 without DLAB set. | |
1022 | */ | |
1023 | serial_outp(up, UART_LCR, 0); | |
1024 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); | |
1025 | status1 = serial_in(up, UART_IIR) >> 5; | |
1026 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1027 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
1028 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); | |
1029 | status2 = serial_in(up, UART_IIR) >> 5; | |
1030 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1031 | serial_outp(up, UART_LCR, 0); | |
1032 | ||
1033 | DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); | |
1034 | ||
1035 | if (status1 == 6 && status2 == 7) { | |
1036 | up->port.type = PORT_16750; | |
1037 | up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; | |
1038 | return; | |
1039 | } | |
1040 | ||
1041 | /* | |
1042 | * Try writing and reading the UART_IER_UUE bit (b6). | |
1043 | * If it works, this is probably one of the Xscale platform's | |
1044 | * internal UARTs. | |
1045 | * We're going to explicitly set the UUE bit to 0 before | |
1046 | * trying to write and read a 1 just to make sure it's not | |
1047 | * already a 1 and maybe locked there before we even start start. | |
1048 | */ | |
1049 | iersave = serial_in(up, UART_IER); | |
1050 | serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); | |
1051 | if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { | |
1052 | /* | |
1053 | * OK it's in a known zero state, try writing and reading | |
1054 | * without disturbing the current state of the other bits. | |
1055 | */ | |
1056 | serial_outp(up, UART_IER, iersave | UART_IER_UUE); | |
1057 | if (serial_in(up, UART_IER) & UART_IER_UUE) { | |
1058 | /* | |
1059 | * It's an Xscale. | |
1060 | * We'll leave the UART_IER_UUE bit set to 1 (enabled). | |
1061 | */ | |
1062 | DEBUG_AUTOCONF("Xscale "); | |
1063 | up->port.type = PORT_XSCALE; | |
1064 | up->capabilities |= UART_CAP_UUE; | |
1065 | return; | |
1066 | } | |
1067 | } else { | |
1068 | /* | |
1069 | * If we got here we couldn't force the IER_UUE bit to 0. | |
1070 | * Log it and continue. | |
1071 | */ | |
1072 | DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); | |
1073 | } | |
1074 | serial_outp(up, UART_IER, iersave); | |
235dae5d PL |
1075 | |
1076 | /* | |
1077 | * We distinguish between 16550A and U6 16550A by counting | |
1078 | * how many bytes are in the FIFO. | |
1079 | */ | |
1080 | if (up->port.type == PORT_16550A && size_fifo(up) == 64) { | |
1081 | up->port.type = PORT_U6_16550A; | |
1082 | up->capabilities |= UART_CAP_AFE; | |
1083 | } | |
1da177e4 LT |
1084 | } |
1085 | ||
1086 | /* | |
1087 | * This routine is called by rs_init() to initialize a specific serial | |
1088 | * port. It determines what type of UART chip this serial port is | |
1089 | * using: 8250, 16450, 16550, 16550A. The important question is | |
1090 | * whether or not this UART is a 16550A or not, since this will | |
1091 | * determine whether or not we can use its FIFO features or not. | |
1092 | */ | |
1093 | static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) | |
1094 | { | |
1095 | unsigned char status1, scratch, scratch2, scratch3; | |
1096 | unsigned char save_lcr, save_mcr; | |
1097 | unsigned long flags; | |
1098 | ||
1099 | if (!up->port.iobase && !up->port.mapbase && !up->port.membase) | |
1100 | return; | |
1101 | ||
80647b95 | 1102 | DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", |
8440838b | 1103 | serial_index(&up->port), up->port.iobase, up->port.membase); |
1da177e4 LT |
1104 | |
1105 | /* | |
1106 | * We really do need global IRQs disabled here - we're going to | |
1107 | * be frobbing the chips IRQ enable register to see if it exists. | |
1108 | */ | |
1109 | spin_lock_irqsave(&up->port.lock, flags); | |
1da177e4 LT |
1110 | |
1111 | up->capabilities = 0; | |
4ba5e35d | 1112 | up->bugs = 0; |
1da177e4 LT |
1113 | |
1114 | if (!(up->port.flags & UPF_BUGGY_UART)) { | |
1115 | /* | |
1116 | * Do a simple existence test first; if we fail this, | |
1117 | * there's no point trying anything else. | |
bd71c182 | 1118 | * |
1da177e4 LT |
1119 | * 0x80 is used as a nonsense port to prevent against |
1120 | * false positives due to ISA bus float. The | |
1121 | * assumption is that 0x80 is a non-existent port; | |
1122 | * which should be safe since include/asm/io.h also | |
1123 | * makes this assumption. | |
1124 | * | |
1125 | * Note: this is safe as long as MCR bit 4 is clear | |
1126 | * and the device is in "PC" mode. | |
1127 | */ | |
1128 | scratch = serial_inp(up, UART_IER); | |
1129 | serial_outp(up, UART_IER, 0); | |
1130 | #ifdef __i386__ | |
1131 | outb(0xff, 0x080); | |
1132 | #endif | |
48212008 TH |
1133 | /* |
1134 | * Mask out IER[7:4] bits for test as some UARTs (e.g. TL | |
1135 | * 16C754B) allow only to modify them if an EFR bit is set. | |
1136 | */ | |
1137 | scratch2 = serial_inp(up, UART_IER) & 0x0f; | |
1da177e4 LT |
1138 | serial_outp(up, UART_IER, 0x0F); |
1139 | #ifdef __i386__ | |
1140 | outb(0, 0x080); | |
1141 | #endif | |
48212008 | 1142 | scratch3 = serial_inp(up, UART_IER) & 0x0f; |
1da177e4 LT |
1143 | serial_outp(up, UART_IER, scratch); |
1144 | if (scratch2 != 0 || scratch3 != 0x0F) { | |
1145 | /* | |
1146 | * We failed; there's nothing here | |
1147 | */ | |
1148 | DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", | |
1149 | scratch2, scratch3); | |
1150 | goto out; | |
1151 | } | |
1152 | } | |
1153 | ||
1154 | save_mcr = serial_in(up, UART_MCR); | |
1155 | save_lcr = serial_in(up, UART_LCR); | |
1156 | ||
bd71c182 | 1157 | /* |
1da177e4 LT |
1158 | * Check to see if a UART is really there. Certain broken |
1159 | * internal modems based on the Rockwell chipset fail this | |
1160 | * test, because they apparently don't implement the loopback | |
1161 | * test mode. So this test is skipped on the COM 1 through | |
1162 | * COM 4 ports. This *should* be safe, since no board | |
1163 | * manufacturer would be stupid enough to design a board | |
1164 | * that conflicts with COM 1-4 --- we hope! | |
1165 | */ | |
1166 | if (!(up->port.flags & UPF_SKIP_TEST)) { | |
1167 | serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); | |
1168 | status1 = serial_inp(up, UART_MSR) & 0xF0; | |
1169 | serial_outp(up, UART_MCR, save_mcr); | |
1170 | if (status1 != 0x90) { | |
1171 | DEBUG_AUTOCONF("LOOP test failed (%02x) ", | |
1172 | status1); | |
1173 | goto out; | |
1174 | } | |
1175 | } | |
1176 | ||
1177 | /* | |
1178 | * We're pretty sure there's a port here. Lets find out what | |
1179 | * type of port it is. The IIR top two bits allows us to find | |
6f0d618f | 1180 | * out if it's 8250 or 16450, 16550, 16550A or later. This |
1da177e4 LT |
1181 | * determines what we test for next. |
1182 | * | |
1183 | * We also initialise the EFR (if any) to zero for later. The | |
1184 | * EFR occupies the same register location as the FCR and IIR. | |
1185 | */ | |
1186 | serial_outp(up, UART_LCR, 0xBF); | |
1187 | serial_outp(up, UART_EFR, 0); | |
1188 | serial_outp(up, UART_LCR, 0); | |
1189 | ||
1190 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1191 | scratch = serial_in(up, UART_IIR) >> 6; | |
1192 | ||
1193 | DEBUG_AUTOCONF("iir=%d ", scratch); | |
1194 | ||
1195 | switch (scratch) { | |
1196 | case 0: | |
1197 | autoconfig_8250(up); | |
1198 | break; | |
1199 | case 1: | |
1200 | up->port.type = PORT_UNKNOWN; | |
1201 | break; | |
1202 | case 2: | |
1203 | up->port.type = PORT_16550; | |
1204 | break; | |
1205 | case 3: | |
1206 | autoconfig_16550a(up); | |
1207 | break; | |
1208 | } | |
1209 | ||
1210 | #ifdef CONFIG_SERIAL_8250_RSA | |
1211 | /* | |
1212 | * Only probe for RSA ports if we got the region. | |
1213 | */ | |
1214 | if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { | |
1215 | int i; | |
1216 | ||
1217 | for (i = 0 ; i < probe_rsa_count; ++i) { | |
1218 | if (probe_rsa[i] == up->port.iobase && | |
1219 | __enable_rsa(up)) { | |
1220 | up->port.type = PORT_RSA; | |
1221 | break; | |
1222 | } | |
1223 | } | |
1224 | } | |
1225 | #endif | |
21c614a7 | 1226 | |
1da177e4 LT |
1227 | serial_outp(up, UART_LCR, save_lcr); |
1228 | ||
1229 | if (up->capabilities != uart_config[up->port.type].flags) { | |
1230 | printk(KERN_WARNING | |
1231 | "ttyS%d: detected caps %08x should be %08x\n", | |
8440838b DM |
1232 | serial_index(&up->port), up->capabilities, |
1233 | uart_config[up->port.type].flags); | |
1da177e4 LT |
1234 | } |
1235 | ||
1236 | up->port.fifosize = uart_config[up->port.type].fifo_size; | |
1237 | up->capabilities = uart_config[up->port.type].flags; | |
1238 | up->tx_loadsz = uart_config[up->port.type].tx_loadsz; | |
1239 | ||
1240 | if (up->port.type == PORT_UNKNOWN) | |
1241 | goto out; | |
1242 | ||
1243 | /* | |
1244 | * Reset the UART. | |
1245 | */ | |
1246 | #ifdef CONFIG_SERIAL_8250_RSA | |
1247 | if (up->port.type == PORT_RSA) | |
1248 | serial_outp(up, UART_RSA_FRR, 0); | |
1249 | #endif | |
1250 | serial_outp(up, UART_MCR, save_mcr); | |
1251 | serial8250_clear_fifos(up); | |
40b36daa | 1252 | serial_in(up, UART_RX); |
5c8c755c LB |
1253 | if (up->capabilities & UART_CAP_UUE) |
1254 | serial_outp(up, UART_IER, UART_IER_UUE); | |
1255 | else | |
1256 | serial_outp(up, UART_IER, 0); | |
1da177e4 | 1257 | |
bd71c182 | 1258 | out: |
1da177e4 | 1259 | spin_unlock_irqrestore(&up->port.lock, flags); |
1da177e4 LT |
1260 | DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); |
1261 | } | |
1262 | ||
1263 | static void autoconfig_irq(struct uart_8250_port *up) | |
1264 | { | |
1265 | unsigned char save_mcr, save_ier; | |
1266 | unsigned char save_ICP = 0; | |
1267 | unsigned int ICP = 0; | |
1268 | unsigned long irqs; | |
1269 | int irq; | |
1270 | ||
1271 | if (up->port.flags & UPF_FOURPORT) { | |
1272 | ICP = (up->port.iobase & 0xfe0) | 0x1f; | |
1273 | save_ICP = inb_p(ICP); | |
1274 | outb_p(0x80, ICP); | |
1275 | (void) inb_p(ICP); | |
1276 | } | |
1277 | ||
1278 | /* forget possible initially masked and pending IRQ */ | |
1279 | probe_irq_off(probe_irq_on()); | |
1280 | save_mcr = serial_inp(up, UART_MCR); | |
1281 | save_ier = serial_inp(up, UART_IER); | |
1282 | serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); | |
bd71c182 | 1283 | |
1da177e4 LT |
1284 | irqs = probe_irq_on(); |
1285 | serial_outp(up, UART_MCR, 0); | |
6f803cd0 AC |
1286 | udelay(10); |
1287 | if (up->port.flags & UPF_FOURPORT) { | |
1da177e4 LT |
1288 | serial_outp(up, UART_MCR, |
1289 | UART_MCR_DTR | UART_MCR_RTS); | |
1290 | } else { | |
1291 | serial_outp(up, UART_MCR, | |
1292 | UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); | |
1293 | } | |
1294 | serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ | |
1295 | (void)serial_inp(up, UART_LSR); | |
1296 | (void)serial_inp(up, UART_RX); | |
1297 | (void)serial_inp(up, UART_IIR); | |
1298 | (void)serial_inp(up, UART_MSR); | |
1299 | serial_outp(up, UART_TX, 0xFF); | |
6f803cd0 | 1300 | udelay(20); |
1da177e4 LT |
1301 | irq = probe_irq_off(irqs); |
1302 | ||
1303 | serial_outp(up, UART_MCR, save_mcr); | |
1304 | serial_outp(up, UART_IER, save_ier); | |
1305 | ||
1306 | if (up->port.flags & UPF_FOURPORT) | |
1307 | outb_p(save_ICP, ICP); | |
1308 | ||
1309 | up->port.irq = (irq > 0) ? irq : 0; | |
1310 | } | |
1311 | ||
e763b90c RK |
1312 | static inline void __stop_tx(struct uart_8250_port *p) |
1313 | { | |
1314 | if (p->ier & UART_IER_THRI) { | |
1315 | p->ier &= ~UART_IER_THRI; | |
1316 | serial_out(p, UART_IER, p->ier); | |
1317 | } | |
1318 | } | |
1319 | ||
b129a8cc | 1320 | static void serial8250_stop_tx(struct uart_port *port) |
1da177e4 LT |
1321 | { |
1322 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1323 | ||
e763b90c | 1324 | __stop_tx(up); |
1da177e4 LT |
1325 | |
1326 | /* | |
e763b90c | 1327 | * We really want to stop the transmitter from sending. |
1da177e4 | 1328 | */ |
e763b90c | 1329 | if (up->port.type == PORT_16C950) { |
1da177e4 LT |
1330 | up->acr |= UART_ACR_TXDIS; |
1331 | serial_icr_write(up, UART_ACR, up->acr); | |
1332 | } | |
1333 | } | |
1334 | ||
55d3b282 RK |
1335 | static void transmit_chars(struct uart_8250_port *up); |
1336 | ||
b129a8cc | 1337 | static void serial8250_start_tx(struct uart_port *port) |
1da177e4 LT |
1338 | { |
1339 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1340 | ||
1341 | if (!(up->ier & UART_IER_THRI)) { | |
1342 | up->ier |= UART_IER_THRI; | |
1343 | serial_out(up, UART_IER, up->ier); | |
55d3b282 | 1344 | |
67f7654e | 1345 | if (up->bugs & UART_BUG_TXEN) { |
68cb4f8e | 1346 | unsigned char lsr; |
55d3b282 | 1347 | lsr = serial_in(up, UART_LSR); |
ad4c2aa6 | 1348 | up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; |
bd71c182 | 1349 | if ((up->port.type == PORT_RM9000) ? |
68cb4f8e IJ |
1350 | (lsr & UART_LSR_THRE) : |
1351 | (lsr & UART_LSR_TEMT)) | |
55d3b282 RK |
1352 | transmit_chars(up); |
1353 | } | |
1da177e4 | 1354 | } |
e763b90c | 1355 | |
1da177e4 | 1356 | /* |
e763b90c | 1357 | * Re-enable the transmitter if we disabled it. |
1da177e4 | 1358 | */ |
e763b90c | 1359 | if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { |
1da177e4 LT |
1360 | up->acr &= ~UART_ACR_TXDIS; |
1361 | serial_icr_write(up, UART_ACR, up->acr); | |
1362 | } | |
1363 | } | |
1364 | ||
1365 | static void serial8250_stop_rx(struct uart_port *port) | |
1366 | { | |
1367 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1368 | ||
1369 | up->ier &= ~UART_IER_RLSI; | |
1370 | up->port.read_status_mask &= ~UART_LSR_DR; | |
1371 | serial_out(up, UART_IER, up->ier); | |
1372 | } | |
1373 | ||
1374 | static void serial8250_enable_ms(struct uart_port *port) | |
1375 | { | |
1376 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1377 | ||
21c614a7 PA |
1378 | /* no MSR capabilities */ |
1379 | if (up->bugs & UART_BUG_NOMSR) | |
1380 | return; | |
1381 | ||
1da177e4 LT |
1382 | up->ier |= UART_IER_MSI; |
1383 | serial_out(up, UART_IER, up->ier); | |
1384 | } | |
1385 | ||
ea8874dc | 1386 | static void |
cc79aa9d | 1387 | receive_chars(struct uart_8250_port *up, unsigned int *status) |
1da177e4 | 1388 | { |
ebd2c8f6 | 1389 | struct tty_struct *tty = up->port.state->port.tty; |
1da177e4 LT |
1390 | unsigned char ch, lsr = *status; |
1391 | int max_count = 256; | |
1392 | char flag; | |
1393 | ||
1394 | do { | |
7500b1f6 AR |
1395 | if (likely(lsr & UART_LSR_DR)) |
1396 | ch = serial_inp(up, UART_RX); | |
1397 | else | |
1398 | /* | |
1399 | * Intel 82571 has a Serial Over Lan device that will | |
1400 | * set UART_LSR_BI without setting UART_LSR_DR when | |
1401 | * it receives a break. To avoid reading from the | |
1402 | * receive buffer without UART_LSR_DR bit set, we | |
1403 | * just force the read character to be 0 | |
1404 | */ | |
1405 | ch = 0; | |
1406 | ||
1da177e4 LT |
1407 | flag = TTY_NORMAL; |
1408 | up->port.icount.rx++; | |
1409 | ||
ad4c2aa6 CM |
1410 | lsr |= up->lsr_saved_flags; |
1411 | up->lsr_saved_flags = 0; | |
1da177e4 | 1412 | |
ad4c2aa6 | 1413 | if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { |
1da177e4 LT |
1414 | /* |
1415 | * For statistics only | |
1416 | */ | |
1417 | if (lsr & UART_LSR_BI) { | |
1418 | lsr &= ~(UART_LSR_FE | UART_LSR_PE); | |
1419 | up->port.icount.brk++; | |
1420 | /* | |
1421 | * We do the SysRQ and SAK checking | |
1422 | * here because otherwise the break | |
1423 | * may get masked by ignore_status_mask | |
1424 | * or read_status_mask. | |
1425 | */ | |
1426 | if (uart_handle_break(&up->port)) | |
1427 | goto ignore_char; | |
1428 | } else if (lsr & UART_LSR_PE) | |
1429 | up->port.icount.parity++; | |
1430 | else if (lsr & UART_LSR_FE) | |
1431 | up->port.icount.frame++; | |
1432 | if (lsr & UART_LSR_OE) | |
1433 | up->port.icount.overrun++; | |
1434 | ||
1435 | /* | |
23907eb8 | 1436 | * Mask off conditions which should be ignored. |
1da177e4 LT |
1437 | */ |
1438 | lsr &= up->port.read_status_mask; | |
1439 | ||
1440 | if (lsr & UART_LSR_BI) { | |
1441 | DEBUG_INTR("handling break...."); | |
1442 | flag = TTY_BREAK; | |
1443 | } else if (lsr & UART_LSR_PE) | |
1444 | flag = TTY_PARITY; | |
1445 | else if (lsr & UART_LSR_FE) | |
1446 | flag = TTY_FRAME; | |
1447 | } | |
7d12e780 | 1448 | if (uart_handle_sysrq_char(&up->port, ch)) |
1da177e4 | 1449 | goto ignore_char; |
05ab3014 RK |
1450 | |
1451 | uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); | |
1452 | ||
6f803cd0 | 1453 | ignore_char: |
1da177e4 | 1454 | lsr = serial_inp(up, UART_LSR); |
7500b1f6 | 1455 | } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); |
1da177e4 LT |
1456 | spin_unlock(&up->port.lock); |
1457 | tty_flip_buffer_push(tty); | |
1458 | spin_lock(&up->port.lock); | |
1459 | *status = lsr; | |
1460 | } | |
1461 | ||
ea8874dc | 1462 | static void transmit_chars(struct uart_8250_port *up) |
1da177e4 | 1463 | { |
ebd2c8f6 | 1464 | struct circ_buf *xmit = &up->port.state->xmit; |
1da177e4 LT |
1465 | int count; |
1466 | ||
1467 | if (up->port.x_char) { | |
1468 | serial_outp(up, UART_TX, up->port.x_char); | |
1469 | up->port.icount.tx++; | |
1470 | up->port.x_char = 0; | |
1471 | return; | |
1472 | } | |
b129a8cc RK |
1473 | if (uart_tx_stopped(&up->port)) { |
1474 | serial8250_stop_tx(&up->port); | |
1475 | return; | |
1476 | } | |
1477 | if (uart_circ_empty(xmit)) { | |
e763b90c | 1478 | __stop_tx(up); |
1da177e4 LT |
1479 | return; |
1480 | } | |
1481 | ||
1482 | count = up->tx_loadsz; | |
1483 | do { | |
1484 | serial_out(up, UART_TX, xmit->buf[xmit->tail]); | |
1485 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
1486 | up->port.icount.tx++; | |
1487 | if (uart_circ_empty(xmit)) | |
1488 | break; | |
1489 | } while (--count > 0); | |
1490 | ||
1491 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
1492 | uart_write_wakeup(&up->port); | |
1493 | ||
1494 | DEBUG_INTR("THRE..."); | |
1495 | ||
1496 | if (uart_circ_empty(xmit)) | |
e763b90c | 1497 | __stop_tx(up); |
1da177e4 LT |
1498 | } |
1499 | ||
2af7cd68 | 1500 | static unsigned int check_modem_status(struct uart_8250_port *up) |
1da177e4 | 1501 | { |
2af7cd68 RK |
1502 | unsigned int status = serial_in(up, UART_MSR); |
1503 | ||
ad4c2aa6 CM |
1504 | status |= up->msr_saved_flags; |
1505 | up->msr_saved_flags = 0; | |
fdc30b3d | 1506 | if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && |
ebd2c8f6 | 1507 | up->port.state != NULL) { |
2af7cd68 RK |
1508 | if (status & UART_MSR_TERI) |
1509 | up->port.icount.rng++; | |
1510 | if (status & UART_MSR_DDSR) | |
1511 | up->port.icount.dsr++; | |
1512 | if (status & UART_MSR_DDCD) | |
1513 | uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); | |
1514 | if (status & UART_MSR_DCTS) | |
1515 | uart_handle_cts_change(&up->port, status & UART_MSR_CTS); | |
1516 | ||
bdc04e31 | 1517 | wake_up_interruptible(&up->port.state->port.delta_msr_wait); |
2af7cd68 | 1518 | } |
1da177e4 | 1519 | |
2af7cd68 | 1520 | return status; |
1da177e4 LT |
1521 | } |
1522 | ||
1523 | /* | |
1524 | * This handles the interrupt from one port. | |
1525 | */ | |
b5d674ab | 1526 | static void serial8250_handle_port(struct uart_8250_port *up) |
1da177e4 | 1527 | { |
45e24601 | 1528 | unsigned int status; |
4bf3631c | 1529 | unsigned long flags; |
45e24601 | 1530 | |
4bf3631c | 1531 | spin_lock_irqsave(&up->port.lock, flags); |
45e24601 RK |
1532 | |
1533 | status = serial_inp(up, UART_LSR); | |
1da177e4 LT |
1534 | |
1535 | DEBUG_INTR("status = %x...", status); | |
1536 | ||
7500b1f6 | 1537 | if (status & (UART_LSR_DR | UART_LSR_BI)) |
7d12e780 | 1538 | receive_chars(up, &status); |
1da177e4 LT |
1539 | check_modem_status(up); |
1540 | if (status & UART_LSR_THRE) | |
1541 | transmit_chars(up); | |
45e24601 | 1542 | |
4bf3631c | 1543 | spin_unlock_irqrestore(&up->port.lock, flags); |
1da177e4 LT |
1544 | } |
1545 | ||
1546 | /* | |
1547 | * This is the serial driver's interrupt routine. | |
1548 | * | |
1549 | * Arjan thinks the old way was overly complex, so it got simplified. | |
1550 | * Alan disagrees, saying that need the complexity to handle the weird | |
1551 | * nature of ISA shared interrupts. (This is a special exception.) | |
1552 | * | |
1553 | * In order to handle ISA shared interrupts properly, we need to check | |
1554 | * that all ports have been serviced, and therefore the ISA interrupt | |
1555 | * line has been de-asserted. | |
1556 | * | |
1557 | * This means we need to loop through all ports. checking that they | |
1558 | * don't have an interrupt pending. | |
1559 | */ | |
7d12e780 | 1560 | static irqreturn_t serial8250_interrupt(int irq, void *dev_id) |
1da177e4 LT |
1561 | { |
1562 | struct irq_info *i = dev_id; | |
1563 | struct list_head *l, *end = NULL; | |
1564 | int pass_counter = 0, handled = 0; | |
1565 | ||
1566 | DEBUG_INTR("serial8250_interrupt(%d)...", irq); | |
1567 | ||
1568 | spin_lock(&i->lock); | |
1569 | ||
1570 | l = i->head; | |
1571 | do { | |
1572 | struct uart_8250_port *up; | |
1573 | unsigned int iir; | |
1574 | ||
1575 | up = list_entry(l, struct uart_8250_port, list); | |
1576 | ||
1577 | iir = serial_in(up, UART_IIR); | |
1578 | if (!(iir & UART_IIR_NO_INT)) { | |
7d12e780 | 1579 | serial8250_handle_port(up); |
1da177e4 LT |
1580 | |
1581 | handled = 1; | |
1582 | ||
beab697a MSJ |
1583 | end = NULL; |
1584 | } else if (up->port.iotype == UPIO_DWAPB && | |
1585 | (iir & UART_IIR_BUSY) == UART_IIR_BUSY) { | |
1586 | /* The DesignWare APB UART has an Busy Detect (0x07) | |
1587 | * interrupt meaning an LCR write attempt occured while the | |
1588 | * UART was busy. The interrupt must be cleared by reading | |
1589 | * the UART status register (USR) and the LCR re-written. */ | |
1590 | unsigned int status; | |
1591 | status = *(volatile u32 *)up->port.private_data; | |
1592 | serial_out(up, UART_LCR, up->lcr); | |
1593 | ||
1594 | handled = 1; | |
1595 | ||
1da177e4 LT |
1596 | end = NULL; |
1597 | } else if (end == NULL) | |
1598 | end = l; | |
1599 | ||
1600 | l = l->next; | |
1601 | ||
1602 | if (l == i->head && pass_counter++ > PASS_LIMIT) { | |
1603 | /* If we hit this, we're dead. */ | |
cd3ecad1 DD |
1604 | printk_ratelimited(KERN_ERR |
1605 | "serial8250: too much work for irq%d\n", irq); | |
1da177e4 LT |
1606 | break; |
1607 | } | |
1608 | } while (l != end); | |
1609 | ||
1610 | spin_unlock(&i->lock); | |
1611 | ||
1612 | DEBUG_INTR("end.\n"); | |
1613 | ||
1614 | return IRQ_RETVAL(handled); | |
1615 | } | |
1616 | ||
1617 | /* | |
1618 | * To support ISA shared interrupts, we need to have one interrupt | |
1619 | * handler that ensures that the IRQ line has been deasserted | |
1620 | * before returning. Failing to do this will result in the IRQ | |
1621 | * line being stuck active, and, since ISA irqs are edge triggered, | |
1622 | * no more IRQs will be seen. | |
1623 | */ | |
1624 | static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) | |
1625 | { | |
1626 | spin_lock_irq(&i->lock); | |
1627 | ||
1628 | if (!list_empty(i->head)) { | |
1629 | if (i->head == &up->list) | |
1630 | i->head = i->head->next; | |
1631 | list_del(&up->list); | |
1632 | } else { | |
1633 | BUG_ON(i->head != &up->list); | |
1634 | i->head = NULL; | |
1635 | } | |
1da177e4 | 1636 | spin_unlock_irq(&i->lock); |
25db8ad5 AC |
1637 | /* List empty so throw away the hash node */ |
1638 | if (i->head == NULL) { | |
1639 | hlist_del(&i->node); | |
1640 | kfree(i); | |
1641 | } | |
1da177e4 LT |
1642 | } |
1643 | ||
1644 | static int serial_link_irq_chain(struct uart_8250_port *up) | |
1645 | { | |
25db8ad5 AC |
1646 | struct hlist_head *h; |
1647 | struct hlist_node *n; | |
1648 | struct irq_info *i; | |
40663cc7 | 1649 | int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; |
1da177e4 | 1650 | |
25db8ad5 AC |
1651 | mutex_lock(&hash_mutex); |
1652 | ||
1653 | h = &irq_lists[up->port.irq % NR_IRQ_HASH]; | |
1654 | ||
1655 | hlist_for_each(n, h) { | |
1656 | i = hlist_entry(n, struct irq_info, node); | |
1657 | if (i->irq == up->port.irq) | |
1658 | break; | |
1659 | } | |
1660 | ||
1661 | if (n == NULL) { | |
1662 | i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); | |
1663 | if (i == NULL) { | |
1664 | mutex_unlock(&hash_mutex); | |
1665 | return -ENOMEM; | |
1666 | } | |
1667 | spin_lock_init(&i->lock); | |
1668 | i->irq = up->port.irq; | |
1669 | hlist_add_head(&i->node, h); | |
1670 | } | |
1671 | mutex_unlock(&hash_mutex); | |
1672 | ||
1da177e4 LT |
1673 | spin_lock_irq(&i->lock); |
1674 | ||
1675 | if (i->head) { | |
1676 | list_add(&up->list, i->head); | |
1677 | spin_unlock_irq(&i->lock); | |
1678 | ||
1679 | ret = 0; | |
1680 | } else { | |
1681 | INIT_LIST_HEAD(&up->list); | |
1682 | i->head = &up->list; | |
1683 | spin_unlock_irq(&i->lock); | |
1c2f0493 | 1684 | irq_flags |= up->port.irqflags; |
1da177e4 LT |
1685 | ret = request_irq(up->port.irq, serial8250_interrupt, |
1686 | irq_flags, "serial", i); | |
1687 | if (ret < 0) | |
1688 | serial_do_unlink(i, up); | |
1689 | } | |
1690 | ||
1691 | return ret; | |
1692 | } | |
1693 | ||
1694 | static void serial_unlink_irq_chain(struct uart_8250_port *up) | |
1695 | { | |
25db8ad5 AC |
1696 | struct irq_info *i; |
1697 | struct hlist_node *n; | |
1698 | struct hlist_head *h; | |
1da177e4 | 1699 | |
25db8ad5 AC |
1700 | mutex_lock(&hash_mutex); |
1701 | ||
1702 | h = &irq_lists[up->port.irq % NR_IRQ_HASH]; | |
1703 | ||
1704 | hlist_for_each(n, h) { | |
1705 | i = hlist_entry(n, struct irq_info, node); | |
1706 | if (i->irq == up->port.irq) | |
1707 | break; | |
1708 | } | |
1709 | ||
1710 | BUG_ON(n == NULL); | |
1da177e4 LT |
1711 | BUG_ON(i->head == NULL); |
1712 | ||
1713 | if (list_empty(i->head)) | |
1714 | free_irq(up->port.irq, i); | |
1715 | ||
1716 | serial_do_unlink(i, up); | |
25db8ad5 | 1717 | mutex_unlock(&hash_mutex); |
1da177e4 LT |
1718 | } |
1719 | ||
1720 | /* | |
1721 | * This function is used to handle ports that do not have an | |
1722 | * interrupt. This doesn't work very well for 16450's, but gives | |
1723 | * barely passable results for a 16550A. (Although at the expense | |
1724 | * of much CPU overhead). | |
1725 | */ | |
1726 | static void serial8250_timeout(unsigned long data) | |
1727 | { | |
1728 | struct uart_8250_port *up = (struct uart_8250_port *)data; | |
1da177e4 LT |
1729 | unsigned int iir; |
1730 | ||
1731 | iir = serial_in(up, UART_IIR); | |
45e24601 | 1732 | if (!(iir & UART_IIR_NO_INT)) |
7d12e780 | 1733 | serial8250_handle_port(up); |
54381067 | 1734 | mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); |
40b36daa AW |
1735 | } |
1736 | ||
1737 | static void serial8250_backup_timeout(unsigned long data) | |
1738 | { | |
1739 | struct uart_8250_port *up = (struct uart_8250_port *)data; | |
ad4c2aa6 CM |
1740 | unsigned int iir, ier = 0, lsr; |
1741 | unsigned long flags; | |
40b36daa AW |
1742 | |
1743 | /* | |
1744 | * Must disable interrupts or else we risk racing with the interrupt | |
1745 | * based handler. | |
1746 | */ | |
1747 | if (is_real_interrupt(up->port.irq)) { | |
1748 | ier = serial_in(up, UART_IER); | |
1749 | serial_out(up, UART_IER, 0); | |
1750 | } | |
1da177e4 | 1751 | |
40b36daa AW |
1752 | iir = serial_in(up, UART_IIR); |
1753 | ||
1754 | /* | |
1755 | * This should be a safe test for anyone who doesn't trust the | |
1756 | * IIR bits on their UART, but it's specifically designed for | |
1757 | * the "Diva" UART used on the management processor on many HP | |
1758 | * ia64 and parisc boxes. | |
1759 | */ | |
ad4c2aa6 CM |
1760 | spin_lock_irqsave(&up->port.lock, flags); |
1761 | lsr = serial_in(up, UART_LSR); | |
1762 | up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; | |
1763 | spin_unlock_irqrestore(&up->port.lock, flags); | |
40b36daa | 1764 | if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && |
ebd2c8f6 | 1765 | (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && |
ad4c2aa6 | 1766 | (lsr & UART_LSR_THRE)) { |
40b36daa AW |
1767 | iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); |
1768 | iir |= UART_IIR_THRI; | |
1769 | } | |
1770 | ||
1771 | if (!(iir & UART_IIR_NO_INT)) | |
1772 | serial8250_handle_port(up); | |
1773 | ||
1774 | if (is_real_interrupt(up->port.irq)) | |
1775 | serial_out(up, UART_IER, ier); | |
1776 | ||
1777 | /* Standard timer interval plus 0.2s to keep the port running */ | |
6f803cd0 | 1778 | mod_timer(&up->timer, |
54381067 | 1779 | jiffies + uart_poll_timeout(&up->port) + HZ / 5); |
1da177e4 LT |
1780 | } |
1781 | ||
1782 | static unsigned int serial8250_tx_empty(struct uart_port *port) | |
1783 | { | |
1784 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1785 | unsigned long flags; | |
ad4c2aa6 | 1786 | unsigned int lsr; |
1da177e4 LT |
1787 | |
1788 | spin_lock_irqsave(&up->port.lock, flags); | |
ad4c2aa6 CM |
1789 | lsr = serial_in(up, UART_LSR); |
1790 | up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; | |
1da177e4 LT |
1791 | spin_unlock_irqrestore(&up->port.lock, flags); |
1792 | ||
bca47613 | 1793 | return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; |
1da177e4 LT |
1794 | } |
1795 | ||
1796 | static unsigned int serial8250_get_mctrl(struct uart_port *port) | |
1797 | { | |
1798 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2af7cd68 | 1799 | unsigned int status; |
1da177e4 LT |
1800 | unsigned int ret; |
1801 | ||
2af7cd68 | 1802 | status = check_modem_status(up); |
1da177e4 LT |
1803 | |
1804 | ret = 0; | |
1805 | if (status & UART_MSR_DCD) | |
1806 | ret |= TIOCM_CAR; | |
1807 | if (status & UART_MSR_RI) | |
1808 | ret |= TIOCM_RNG; | |
1809 | if (status & UART_MSR_DSR) | |
1810 | ret |= TIOCM_DSR; | |
1811 | if (status & UART_MSR_CTS) | |
1812 | ret |= TIOCM_CTS; | |
1813 | return ret; | |
1814 | } | |
1815 | ||
1816 | static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
1817 | { | |
1818 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1819 | unsigned char mcr = 0; | |
1820 | ||
1821 | if (mctrl & TIOCM_RTS) | |
1822 | mcr |= UART_MCR_RTS; | |
1823 | if (mctrl & TIOCM_DTR) | |
1824 | mcr |= UART_MCR_DTR; | |
1825 | if (mctrl & TIOCM_OUT1) | |
1826 | mcr |= UART_MCR_OUT1; | |
1827 | if (mctrl & TIOCM_OUT2) | |
1828 | mcr |= UART_MCR_OUT2; | |
1829 | if (mctrl & TIOCM_LOOP) | |
1830 | mcr |= UART_MCR_LOOP; | |
1831 | ||
1832 | mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; | |
1833 | ||
1834 | serial_out(up, UART_MCR, mcr); | |
1835 | } | |
1836 | ||
1837 | static void serial8250_break_ctl(struct uart_port *port, int break_state) | |
1838 | { | |
1839 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1840 | unsigned long flags; | |
1841 | ||
1842 | spin_lock_irqsave(&up->port.lock, flags); | |
1843 | if (break_state == -1) | |
1844 | up->lcr |= UART_LCR_SBC; | |
1845 | else | |
1846 | up->lcr &= ~UART_LCR_SBC; | |
1847 | serial_out(up, UART_LCR, up->lcr); | |
1848 | spin_unlock_irqrestore(&up->port.lock, flags); | |
1849 | } | |
1850 | ||
40b36daa AW |
1851 | /* |
1852 | * Wait for transmitter & holding register to empty | |
1853 | */ | |
b5d674ab | 1854 | static void wait_for_xmitr(struct uart_8250_port *up, int bits) |
40b36daa AW |
1855 | { |
1856 | unsigned int status, tmout = 10000; | |
1857 | ||
1858 | /* Wait up to 10ms for the character(s) to be sent. */ | |
97d303b7 | 1859 | for (;;) { |
40b36daa AW |
1860 | status = serial_in(up, UART_LSR); |
1861 | ||
ad4c2aa6 | 1862 | up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; |
40b36daa | 1863 | |
97d303b7 DD |
1864 | if ((status & bits) == bits) |
1865 | break; | |
40b36daa AW |
1866 | if (--tmout == 0) |
1867 | break; | |
1868 | udelay(1); | |
97d303b7 | 1869 | } |
40b36daa AW |
1870 | |
1871 | /* Wait up to 1s for flow control if necessary */ | |
1872 | if (up->port.flags & UPF_CONS_FLOW) { | |
ad4c2aa6 CM |
1873 | unsigned int tmout; |
1874 | for (tmout = 1000000; tmout; tmout--) { | |
1875 | unsigned int msr = serial_in(up, UART_MSR); | |
1876 | up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; | |
1877 | if (msr & UART_MSR_CTS) | |
1878 | break; | |
40b36daa AW |
1879 | udelay(1); |
1880 | touch_nmi_watchdog(); | |
1881 | } | |
1882 | } | |
1883 | } | |
1884 | ||
f2d937f3 JW |
1885 | #ifdef CONFIG_CONSOLE_POLL |
1886 | /* | |
1887 | * Console polling routines for writing and reading from the uart while | |
1888 | * in an interrupt or debug context. | |
1889 | */ | |
1890 | ||
1891 | static int serial8250_get_poll_char(struct uart_port *port) | |
1892 | { | |
1893 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1894 | unsigned char lsr = serial_inp(up, UART_LSR); | |
1895 | ||
f5316b4a JW |
1896 | if (!(lsr & UART_LSR_DR)) |
1897 | return NO_POLL_CHAR; | |
f2d937f3 JW |
1898 | |
1899 | return serial_inp(up, UART_RX); | |
1900 | } | |
1901 | ||
1902 | ||
1903 | static void serial8250_put_poll_char(struct uart_port *port, | |
1904 | unsigned char c) | |
1905 | { | |
1906 | unsigned int ier; | |
1907 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1908 | ||
1909 | /* | |
1910 | * First save the IER then disable the interrupts | |
1911 | */ | |
1912 | ier = serial_in(up, UART_IER); | |
1913 | if (up->capabilities & UART_CAP_UUE) | |
1914 | serial_out(up, UART_IER, UART_IER_UUE); | |
1915 | else | |
1916 | serial_out(up, UART_IER, 0); | |
1917 | ||
1918 | wait_for_xmitr(up, BOTH_EMPTY); | |
1919 | /* | |
1920 | * Send the character out. | |
1921 | * If a LF, also do CR... | |
1922 | */ | |
1923 | serial_out(up, UART_TX, c); | |
1924 | if (c == 10) { | |
1925 | wait_for_xmitr(up, BOTH_EMPTY); | |
1926 | serial_out(up, UART_TX, 13); | |
1927 | } | |
1928 | ||
1929 | /* | |
1930 | * Finally, wait for transmitter to become empty | |
1931 | * and restore the IER | |
1932 | */ | |
1933 | wait_for_xmitr(up, BOTH_EMPTY); | |
1934 | serial_out(up, UART_IER, ier); | |
1935 | } | |
1936 | ||
1937 | #endif /* CONFIG_CONSOLE_POLL */ | |
1938 | ||
1da177e4 LT |
1939 | static int serial8250_startup(struct uart_port *port) |
1940 | { | |
1941 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1942 | unsigned long flags; | |
55d3b282 | 1943 | unsigned char lsr, iir; |
1da177e4 LT |
1944 | int retval; |
1945 | ||
1946 | up->capabilities = uart_config[up->port.type].flags; | |
1947 | up->mcr = 0; | |
1948 | ||
b8e7e40a AC |
1949 | if (up->port.iotype != up->cur_iotype) |
1950 | set_io_from_upio(port); | |
1951 | ||
1da177e4 LT |
1952 | if (up->port.type == PORT_16C950) { |
1953 | /* Wake up and initialize UART */ | |
1954 | up->acr = 0; | |
1955 | serial_outp(up, UART_LCR, 0xBF); | |
1956 | serial_outp(up, UART_EFR, UART_EFR_ECB); | |
1957 | serial_outp(up, UART_IER, 0); | |
1958 | serial_outp(up, UART_LCR, 0); | |
1959 | serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ | |
1960 | serial_outp(up, UART_LCR, 0xBF); | |
1961 | serial_outp(up, UART_EFR, UART_EFR_ECB); | |
1962 | serial_outp(up, UART_LCR, 0); | |
1963 | } | |
1964 | ||
1965 | #ifdef CONFIG_SERIAL_8250_RSA | |
1966 | /* | |
1967 | * If this is an RSA port, see if we can kick it up to the | |
1968 | * higher speed clock. | |
1969 | */ | |
1970 | enable_rsa(up); | |
1971 | #endif | |
1972 | ||
1973 | /* | |
1974 | * Clear the FIFO buffers and disable them. | |
7f927fcc | 1975 | * (they will be reenabled in set_termios()) |
1da177e4 LT |
1976 | */ |
1977 | serial8250_clear_fifos(up); | |
1978 | ||
1979 | /* | |
1980 | * Clear the interrupt registers. | |
1981 | */ | |
1982 | (void) serial_inp(up, UART_LSR); | |
1983 | (void) serial_inp(up, UART_RX); | |
1984 | (void) serial_inp(up, UART_IIR); | |
1985 | (void) serial_inp(up, UART_MSR); | |
1986 | ||
1987 | /* | |
1988 | * At this point, there's no way the LSR could still be 0xff; | |
1989 | * if it is, then bail out, because there's likely no UART | |
1990 | * here. | |
1991 | */ | |
1992 | if (!(up->port.flags & UPF_BUGGY_UART) && | |
1993 | (serial_inp(up, UART_LSR) == 0xff)) { | |
8440838b DM |
1994 | printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n", |
1995 | serial_index(&up->port)); | |
1da177e4 LT |
1996 | return -ENODEV; |
1997 | } | |
1998 | ||
1999 | /* | |
2000 | * For a XR16C850, we need to set the trigger levels | |
2001 | */ | |
2002 | if (up->port.type == PORT_16850) { | |
2003 | unsigned char fctr; | |
2004 | ||
2005 | serial_outp(up, UART_LCR, 0xbf); | |
2006 | ||
2007 | fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); | |
2008 | serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); | |
2009 | serial_outp(up, UART_TRG, UART_TRG_96); | |
2010 | serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); | |
2011 | serial_outp(up, UART_TRG, UART_TRG_96); | |
2012 | ||
2013 | serial_outp(up, UART_LCR, 0); | |
2014 | } | |
2015 | ||
40b36daa | 2016 | if (is_real_interrupt(up->port.irq)) { |
01c194d9 | 2017 | unsigned char iir1; |
40b36daa AW |
2018 | /* |
2019 | * Test for UARTs that do not reassert THRE when the | |
2020 | * transmitter is idle and the interrupt has already | |
2021 | * been cleared. Real 16550s should always reassert | |
2022 | * this interrupt whenever the transmitter is idle and | |
2023 | * the interrupt is enabled. Delays are necessary to | |
2024 | * allow register changes to become visible. | |
2025 | */ | |
c389d27b | 2026 | spin_lock_irqsave(&up->port.lock, flags); |
1c2f0493 | 2027 | if (up->port.irqflags & IRQF_SHARED) |
768aec0b | 2028 | disable_irq_nosync(up->port.irq); |
40b36daa AW |
2029 | |
2030 | wait_for_xmitr(up, UART_LSR_THRE); | |
2031 | serial_out_sync(up, UART_IER, UART_IER_THRI); | |
2032 | udelay(1); /* allow THRE to set */ | |
01c194d9 | 2033 | iir1 = serial_in(up, UART_IIR); |
40b36daa AW |
2034 | serial_out(up, UART_IER, 0); |
2035 | serial_out_sync(up, UART_IER, UART_IER_THRI); | |
2036 | udelay(1); /* allow a working UART time to re-assert THRE */ | |
2037 | iir = serial_in(up, UART_IIR); | |
2038 | serial_out(up, UART_IER, 0); | |
2039 | ||
1c2f0493 | 2040 | if (up->port.irqflags & IRQF_SHARED) |
768aec0b | 2041 | enable_irq(up->port.irq); |
c389d27b | 2042 | spin_unlock_irqrestore(&up->port.lock, flags); |
40b36daa AW |
2043 | |
2044 | /* | |
2045 | * If the interrupt is not reasserted, setup a timer to | |
2046 | * kick the UART on a regular basis. | |
2047 | */ | |
01c194d9 | 2048 | if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { |
363f66fe | 2049 | up->bugs |= UART_BUG_THRE; |
8440838b DM |
2050 | pr_debug("ttyS%d - using backup timer\n", |
2051 | serial_index(port)); | |
40b36daa AW |
2052 | } |
2053 | } | |
2054 | ||
363f66fe WN |
2055 | /* |
2056 | * The above check will only give an accurate result the first time | |
2057 | * the port is opened so this value needs to be preserved. | |
2058 | */ | |
2059 | if (up->bugs & UART_BUG_THRE) { | |
2060 | up->timer.function = serial8250_backup_timeout; | |
2061 | up->timer.data = (unsigned long)up; | |
2062 | mod_timer(&up->timer, jiffies + | |
54381067 | 2063 | uart_poll_timeout(port) + HZ / 5); |
363f66fe WN |
2064 | } |
2065 | ||
1da177e4 LT |
2066 | /* |
2067 | * If the "interrupt" for this port doesn't correspond with any | |
2068 | * hardware interrupt, we use a timer-based system. The original | |
2069 | * driver used to do this with IRQ0. | |
2070 | */ | |
2071 | if (!is_real_interrupt(up->port.irq)) { | |
1da177e4 | 2072 | up->timer.data = (unsigned long)up; |
54381067 | 2073 | mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); |
1da177e4 LT |
2074 | } else { |
2075 | retval = serial_link_irq_chain(up); | |
2076 | if (retval) | |
2077 | return retval; | |
2078 | } | |
2079 | ||
2080 | /* | |
2081 | * Now, initialize the UART | |
2082 | */ | |
2083 | serial_outp(up, UART_LCR, UART_LCR_WLEN8); | |
2084 | ||
2085 | spin_lock_irqsave(&up->port.lock, flags); | |
2086 | if (up->port.flags & UPF_FOURPORT) { | |
2087 | if (!is_real_interrupt(up->port.irq)) | |
2088 | up->port.mctrl |= TIOCM_OUT1; | |
2089 | } else | |
2090 | /* | |
2091 | * Most PC uarts need OUT2 raised to enable interrupts. | |
2092 | */ | |
2093 | if (is_real_interrupt(up->port.irq)) | |
2094 | up->port.mctrl |= TIOCM_OUT2; | |
2095 | ||
2096 | serial8250_set_mctrl(&up->port, up->port.mctrl); | |
55d3b282 | 2097 | |
b6adea33 MCC |
2098 | /* Serial over Lan (SoL) hack: |
2099 | Intel 8257x Gigabit ethernet chips have a | |
2100 | 16550 emulation, to be used for Serial Over Lan. | |
2101 | Those chips take a longer time than a normal | |
2102 | serial device to signalize that a transmission | |
2103 | data was queued. Due to that, the above test generally | |
2104 | fails. One solution would be to delay the reading of | |
2105 | iir. However, this is not reliable, since the timeout | |
2106 | is variable. So, let's just don't test if we receive | |
2107 | TX irq. This way, we'll never enable UART_BUG_TXEN. | |
2108 | */ | |
d41a4b51 | 2109 | if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST) |
b6adea33 MCC |
2110 | goto dont_test_tx_en; |
2111 | ||
55d3b282 RK |
2112 | /* |
2113 | * Do a quick test to see if we receive an | |
2114 | * interrupt when we enable the TX irq. | |
2115 | */ | |
2116 | serial_outp(up, UART_IER, UART_IER_THRI); | |
2117 | lsr = serial_in(up, UART_LSR); | |
2118 | iir = serial_in(up, UART_IIR); | |
2119 | serial_outp(up, UART_IER, 0); | |
2120 | ||
2121 | if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { | |
67f7654e RK |
2122 | if (!(up->bugs & UART_BUG_TXEN)) { |
2123 | up->bugs |= UART_BUG_TXEN; | |
55d3b282 | 2124 | pr_debug("ttyS%d - enabling bad tx status workarounds\n", |
8440838b | 2125 | serial_index(port)); |
55d3b282 RK |
2126 | } |
2127 | } else { | |
67f7654e | 2128 | up->bugs &= ~UART_BUG_TXEN; |
55d3b282 RK |
2129 | } |
2130 | ||
b6adea33 | 2131 | dont_test_tx_en: |
1da177e4 LT |
2132 | spin_unlock_irqrestore(&up->port.lock, flags); |
2133 | ||
ad4c2aa6 CM |
2134 | /* |
2135 | * Clear the interrupt registers again for luck, and clear the | |
2136 | * saved flags to avoid getting false values from polling | |
2137 | * routines or the previous session. | |
2138 | */ | |
2139 | serial_inp(up, UART_LSR); | |
2140 | serial_inp(up, UART_RX); | |
2141 | serial_inp(up, UART_IIR); | |
2142 | serial_inp(up, UART_MSR); | |
2143 | up->lsr_saved_flags = 0; | |
2144 | up->msr_saved_flags = 0; | |
2145 | ||
1da177e4 LT |
2146 | /* |
2147 | * Finally, enable interrupts. Note: Modem status interrupts | |
2148 | * are set via set_termios(), which will be occurring imminently | |
2149 | * anyway, so we don't enable them here. | |
2150 | */ | |
2151 | up->ier = UART_IER_RLSI | UART_IER_RDI; | |
2152 | serial_outp(up, UART_IER, up->ier); | |
2153 | ||
2154 | if (up->port.flags & UPF_FOURPORT) { | |
2155 | unsigned int icp; | |
2156 | /* | |
2157 | * Enable interrupts on the AST Fourport board | |
2158 | */ | |
2159 | icp = (up->port.iobase & 0xfe0) | 0x01f; | |
2160 | outb_p(0x80, icp); | |
2161 | (void) inb_p(icp); | |
2162 | } | |
2163 | ||
1da177e4 LT |
2164 | return 0; |
2165 | } | |
2166 | ||
2167 | static void serial8250_shutdown(struct uart_port *port) | |
2168 | { | |
2169 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2170 | unsigned long flags; | |
2171 | ||
2172 | /* | |
2173 | * Disable interrupts from this port | |
2174 | */ | |
2175 | up->ier = 0; | |
2176 | serial_outp(up, UART_IER, 0); | |
2177 | ||
2178 | spin_lock_irqsave(&up->port.lock, flags); | |
2179 | if (up->port.flags & UPF_FOURPORT) { | |
2180 | /* reset interrupts on the AST Fourport board */ | |
2181 | inb((up->port.iobase & 0xfe0) | 0x1f); | |
2182 | up->port.mctrl |= TIOCM_OUT1; | |
2183 | } else | |
2184 | up->port.mctrl &= ~TIOCM_OUT2; | |
2185 | ||
2186 | serial8250_set_mctrl(&up->port, up->port.mctrl); | |
2187 | spin_unlock_irqrestore(&up->port.lock, flags); | |
2188 | ||
2189 | /* | |
2190 | * Disable break condition and FIFOs | |
2191 | */ | |
2192 | serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); | |
2193 | serial8250_clear_fifos(up); | |
2194 | ||
2195 | #ifdef CONFIG_SERIAL_8250_RSA | |
2196 | /* | |
2197 | * Reset the RSA board back to 115kbps compat mode. | |
2198 | */ | |
2199 | disable_rsa(up); | |
2200 | #endif | |
2201 | ||
2202 | /* | |
2203 | * Read data port to reset things, and then unlink from | |
2204 | * the IRQ chain. | |
2205 | */ | |
2206 | (void) serial_in(up, UART_RX); | |
2207 | ||
40b36daa AW |
2208 | del_timer_sync(&up->timer); |
2209 | up->timer.function = serial8250_timeout; | |
2210 | if (is_real_interrupt(up->port.irq)) | |
1da177e4 LT |
2211 | serial_unlink_irq_chain(up); |
2212 | } | |
2213 | ||
2214 | static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) | |
2215 | { | |
2216 | unsigned int quot; | |
2217 | ||
2218 | /* | |
2219 | * Handle magic divisors for baud rates above baud_base on | |
2220 | * SMSC SuperIO chips. | |
2221 | */ | |
2222 | if ((port->flags & UPF_MAGIC_MULTIPLIER) && | |
2223 | baud == (port->uartclk/4)) | |
2224 | quot = 0x8001; | |
2225 | else if ((port->flags & UPF_MAGIC_MULTIPLIER) && | |
2226 | baud == (port->uartclk/8)) | |
2227 | quot = 0x8002; | |
2228 | else | |
2229 | quot = uart_get_divisor(port, baud); | |
2230 | ||
2231 | return quot; | |
2232 | } | |
2233 | ||
235dae5d PL |
2234 | void |
2235 | serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, | |
2236 | struct ktermios *old) | |
1da177e4 LT |
2237 | { |
2238 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2239 | unsigned char cval, fcr = 0; | |
2240 | unsigned long flags; | |
2241 | unsigned int baud, quot; | |
2242 | ||
2243 | switch (termios->c_cflag & CSIZE) { | |
2244 | case CS5: | |
0a8b80c5 | 2245 | cval = UART_LCR_WLEN5; |
1da177e4 LT |
2246 | break; |
2247 | case CS6: | |
0a8b80c5 | 2248 | cval = UART_LCR_WLEN6; |
1da177e4 LT |
2249 | break; |
2250 | case CS7: | |
0a8b80c5 | 2251 | cval = UART_LCR_WLEN7; |
1da177e4 LT |
2252 | break; |
2253 | default: | |
2254 | case CS8: | |
0a8b80c5 | 2255 | cval = UART_LCR_WLEN8; |
1da177e4 LT |
2256 | break; |
2257 | } | |
2258 | ||
2259 | if (termios->c_cflag & CSTOPB) | |
0a8b80c5 | 2260 | cval |= UART_LCR_STOP; |
1da177e4 LT |
2261 | if (termios->c_cflag & PARENB) |
2262 | cval |= UART_LCR_PARITY; | |
2263 | if (!(termios->c_cflag & PARODD)) | |
2264 | cval |= UART_LCR_EPAR; | |
2265 | #ifdef CMSPAR | |
2266 | if (termios->c_cflag & CMSPAR) | |
2267 | cval |= UART_LCR_SPAR; | |
2268 | #endif | |
2269 | ||
2270 | /* | |
2271 | * Ask the core to calculate the divisor for us. | |
2272 | */ | |
24d481ec AV |
2273 | baud = uart_get_baud_rate(port, termios, old, |
2274 | port->uartclk / 16 / 0xffff, | |
2275 | port->uartclk / 16); | |
1da177e4 LT |
2276 | quot = serial8250_get_divisor(port, baud); |
2277 | ||
2278 | /* | |
4ba5e35d | 2279 | * Oxford Semi 952 rev B workaround |
1da177e4 | 2280 | */ |
4ba5e35d | 2281 | if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) |
3e8d4e20 | 2282 | quot++; |
1da177e4 LT |
2283 | |
2284 | if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { | |
2285 | if (baud < 2400) | |
2286 | fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; | |
2287 | else | |
2288 | fcr = uart_config[up->port.type].fcr; | |
2289 | } | |
2290 | ||
2291 | /* | |
2292 | * MCR-based auto flow control. When AFE is enabled, RTS will be | |
2293 | * deasserted when the receive FIFO contains more characters than | |
2294 | * the trigger, or the MCR RTS bit is cleared. In the case where | |
2295 | * the remote UART is not using CTS auto flow control, we must | |
2296 | * have sufficient FIFO entries for the latency of the remote | |
2297 | * UART to respond. IOW, at least 32 bytes of FIFO. | |
2298 | */ | |
2299 | if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { | |
2300 | up->mcr &= ~UART_MCR_AFE; | |
2301 | if (termios->c_cflag & CRTSCTS) | |
2302 | up->mcr |= UART_MCR_AFE; | |
2303 | } | |
2304 | ||
2305 | /* | |
2306 | * Ok, we're now changing the port state. Do it with | |
2307 | * interrupts disabled. | |
2308 | */ | |
2309 | spin_lock_irqsave(&up->port.lock, flags); | |
2310 | ||
2311 | /* | |
2312 | * Update the per-port timeout. | |
2313 | */ | |
2314 | uart_update_timeout(port, termios->c_cflag, baud); | |
2315 | ||
2316 | up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; | |
2317 | if (termios->c_iflag & INPCK) | |
2318 | up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; | |
2319 | if (termios->c_iflag & (BRKINT | PARMRK)) | |
2320 | up->port.read_status_mask |= UART_LSR_BI; | |
2321 | ||
2322 | /* | |
2323 | * Characteres to ignore | |
2324 | */ | |
2325 | up->port.ignore_status_mask = 0; | |
2326 | if (termios->c_iflag & IGNPAR) | |
2327 | up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; | |
2328 | if (termios->c_iflag & IGNBRK) { | |
2329 | up->port.ignore_status_mask |= UART_LSR_BI; | |
2330 | /* | |
2331 | * If we're ignoring parity and break indicators, | |
2332 | * ignore overruns too (for real raw support). | |
2333 | */ | |
2334 | if (termios->c_iflag & IGNPAR) | |
2335 | up->port.ignore_status_mask |= UART_LSR_OE; | |
2336 | } | |
2337 | ||
2338 | /* | |
2339 | * ignore all characters if CREAD is not set | |
2340 | */ | |
2341 | if ((termios->c_cflag & CREAD) == 0) | |
2342 | up->port.ignore_status_mask |= UART_LSR_DR; | |
2343 | ||
2344 | /* | |
2345 | * CTS flow control flag and modem status interrupts | |
2346 | */ | |
2347 | up->ier &= ~UART_IER_MSI; | |
21c614a7 PA |
2348 | if (!(up->bugs & UART_BUG_NOMSR) && |
2349 | UART_ENABLE_MS(&up->port, termios->c_cflag)) | |
1da177e4 LT |
2350 | up->ier |= UART_IER_MSI; |
2351 | if (up->capabilities & UART_CAP_UUE) | |
2352 | up->ier |= UART_IER_UUE | UART_IER_RTOIE; | |
2353 | ||
2354 | serial_out(up, UART_IER, up->ier); | |
2355 | ||
2356 | if (up->capabilities & UART_CAP_EFR) { | |
2357 | unsigned char efr = 0; | |
2358 | /* | |
2359 | * TI16C752/Startech hardware flow control. FIXME: | |
2360 | * - TI16C752 requires control thresholds to be set. | |
2361 | * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. | |
2362 | */ | |
2363 | if (termios->c_cflag & CRTSCTS) | |
2364 | efr |= UART_EFR_CTS; | |
2365 | ||
2366 | serial_outp(up, UART_LCR, 0xBF); | |
2367 | serial_outp(up, UART_EFR, efr); | |
2368 | } | |
2369 | ||
f2eda27d | 2370 | #ifdef CONFIG_ARCH_OMAP |
255341c6 | 2371 | /* Workaround to enable 115200 baud on OMAP1510 internal ports */ |
5668545a | 2372 | if (cpu_is_omap1510() && is_omap_port(up)) { |
255341c6 JM |
2373 | if (baud == 115200) { |
2374 | quot = 1; | |
2375 | serial_out(up, UART_OMAP_OSC_12M_SEL, 1); | |
2376 | } else | |
2377 | serial_out(up, UART_OMAP_OSC_12M_SEL, 0); | |
2378 | } | |
2379 | #endif | |
2380 | ||
1da177e4 LT |
2381 | if (up->capabilities & UART_NATSEMI) { |
2382 | /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ | |
2383 | serial_outp(up, UART_LCR, 0xe0); | |
2384 | } else { | |
2385 | serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ | |
2386 | } | |
2387 | ||
b32b19b8 | 2388 | serial_dl_write(up, quot); |
1da177e4 LT |
2389 | |
2390 | /* | |
2391 | * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR | |
2392 | * is written without DLAB set, this mode will be disabled. | |
2393 | */ | |
2394 | if (up->port.type == PORT_16750) | |
2395 | serial_outp(up, UART_FCR, fcr); | |
2396 | ||
2397 | serial_outp(up, UART_LCR, cval); /* reset DLAB */ | |
2398 | up->lcr = cval; /* Save LCR */ | |
2399 | if (up->port.type != PORT_16750) { | |
2400 | if (fcr & UART_FCR_ENABLE_FIFO) { | |
2401 | /* emulated UARTs (Lucent Venus 167x) need two steps */ | |
2402 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
2403 | } | |
2404 | serial_outp(up, UART_FCR, fcr); /* set fcr */ | |
2405 | } | |
2406 | serial8250_set_mctrl(&up->port, up->port.mctrl); | |
2407 | spin_unlock_irqrestore(&up->port.lock, flags); | |
e991a2bd AC |
2408 | /* Don't rewrite B0 */ |
2409 | if (tty_termios_baud_rate(termios)) | |
2410 | tty_termios_encode_baud_rate(termios, baud, baud); | |
1da177e4 | 2411 | } |
235dae5d PL |
2412 | EXPORT_SYMBOL(serial8250_do_set_termios); |
2413 | ||
2414 | static void | |
2415 | serial8250_set_termios(struct uart_port *port, struct ktermios *termios, | |
2416 | struct ktermios *old) | |
2417 | { | |
2418 | if (port->set_termios) | |
2419 | port->set_termios(port, termios, old); | |
2420 | else | |
2421 | serial8250_do_set_termios(port, termios, old); | |
2422 | } | |
1da177e4 | 2423 | |
dc77f161 | 2424 | static void |
a0821df6 | 2425 | serial8250_set_ldisc(struct uart_port *port, int new) |
dc77f161 | 2426 | { |
a0821df6 | 2427 | if (new == N_PPS) { |
dc77f161 RG |
2428 | port->flags |= UPF_HARDPPS_CD; |
2429 | serial8250_enable_ms(port); | |
2430 | } else | |
2431 | port->flags &= ~UPF_HARDPPS_CD; | |
2432 | } | |
2433 | ||
c161afe9 ML |
2434 | |
2435 | void serial8250_do_pm(struct uart_port *port, unsigned int state, | |
2436 | unsigned int oldstate) | |
1da177e4 LT |
2437 | { |
2438 | struct uart_8250_port *p = (struct uart_8250_port *)port; | |
2439 | ||
2440 | serial8250_set_sleep(p, state != 0); | |
c161afe9 ML |
2441 | } |
2442 | EXPORT_SYMBOL(serial8250_do_pm); | |
1da177e4 | 2443 | |
c161afe9 ML |
2444 | static void |
2445 | serial8250_pm(struct uart_port *port, unsigned int state, | |
2446 | unsigned int oldstate) | |
2447 | { | |
2448 | if (port->pm) | |
2449 | port->pm(port, state, oldstate); | |
2450 | else | |
2451 | serial8250_do_pm(port, state, oldstate); | |
1da177e4 LT |
2452 | } |
2453 | ||
f2eda27d RK |
2454 | static unsigned int serial8250_port_size(struct uart_8250_port *pt) |
2455 | { | |
2456 | if (pt->port.iotype == UPIO_AU) | |
b2b13cdf | 2457 | return 0x1000; |
f2eda27d RK |
2458 | #ifdef CONFIG_ARCH_OMAP |
2459 | if (is_omap_port(pt)) | |
2460 | return 0x16 << pt->port.regshift; | |
2461 | #endif | |
2462 | return 8 << pt->port.regshift; | |
2463 | } | |
2464 | ||
1da177e4 LT |
2465 | /* |
2466 | * Resource handling. | |
2467 | */ | |
2468 | static int serial8250_request_std_resource(struct uart_8250_port *up) | |
2469 | { | |
f2eda27d | 2470 | unsigned int size = serial8250_port_size(up); |
1da177e4 LT |
2471 | int ret = 0; |
2472 | ||
2473 | switch (up->port.iotype) { | |
85835f44 | 2474 | case UPIO_AU: |
0b30d668 SS |
2475 | case UPIO_TSI: |
2476 | case UPIO_MEM32: | |
1da177e4 | 2477 | case UPIO_MEM: |
beab697a | 2478 | case UPIO_DWAPB: |
1da177e4 LT |
2479 | if (!up->port.mapbase) |
2480 | break; | |
2481 | ||
2482 | if (!request_mem_region(up->port.mapbase, size, "serial")) { | |
2483 | ret = -EBUSY; | |
2484 | break; | |
2485 | } | |
2486 | ||
2487 | if (up->port.flags & UPF_IOREMAP) { | |
6f441fe9 AC |
2488 | up->port.membase = ioremap_nocache(up->port.mapbase, |
2489 | size); | |
1da177e4 LT |
2490 | if (!up->port.membase) { |
2491 | release_mem_region(up->port.mapbase, size); | |
2492 | ret = -ENOMEM; | |
2493 | } | |
2494 | } | |
2495 | break; | |
2496 | ||
2497 | case UPIO_HUB6: | |
2498 | case UPIO_PORT: | |
2499 | if (!request_region(up->port.iobase, size, "serial")) | |
2500 | ret = -EBUSY; | |
2501 | break; | |
2502 | } | |
2503 | return ret; | |
2504 | } | |
2505 | ||
2506 | static void serial8250_release_std_resource(struct uart_8250_port *up) | |
2507 | { | |
f2eda27d | 2508 | unsigned int size = serial8250_port_size(up); |
1da177e4 LT |
2509 | |
2510 | switch (up->port.iotype) { | |
85835f44 | 2511 | case UPIO_AU: |
0b30d668 SS |
2512 | case UPIO_TSI: |
2513 | case UPIO_MEM32: | |
1da177e4 | 2514 | case UPIO_MEM: |
beab697a | 2515 | case UPIO_DWAPB: |
1da177e4 LT |
2516 | if (!up->port.mapbase) |
2517 | break; | |
2518 | ||
2519 | if (up->port.flags & UPF_IOREMAP) { | |
2520 | iounmap(up->port.membase); | |
2521 | up->port.membase = NULL; | |
2522 | } | |
2523 | ||
2524 | release_mem_region(up->port.mapbase, size); | |
2525 | break; | |
2526 | ||
2527 | case UPIO_HUB6: | |
2528 | case UPIO_PORT: | |
2529 | release_region(up->port.iobase, size); | |
2530 | break; | |
2531 | } | |
2532 | } | |
2533 | ||
2534 | static int serial8250_request_rsa_resource(struct uart_8250_port *up) | |
2535 | { | |
2536 | unsigned long start = UART_RSA_BASE << up->port.regshift; | |
2537 | unsigned int size = 8 << up->port.regshift; | |
0b30d668 | 2538 | int ret = -EINVAL; |
1da177e4 LT |
2539 | |
2540 | switch (up->port.iotype) { | |
1da177e4 LT |
2541 | case UPIO_HUB6: |
2542 | case UPIO_PORT: | |
2543 | start += up->port.iobase; | |
0b30d668 SS |
2544 | if (request_region(start, size, "serial-rsa")) |
2545 | ret = 0; | |
2546 | else | |
1da177e4 LT |
2547 | ret = -EBUSY; |
2548 | break; | |
2549 | } | |
2550 | ||
2551 | return ret; | |
2552 | } | |
2553 | ||
2554 | static void serial8250_release_rsa_resource(struct uart_8250_port *up) | |
2555 | { | |
2556 | unsigned long offset = UART_RSA_BASE << up->port.regshift; | |
2557 | unsigned int size = 8 << up->port.regshift; | |
2558 | ||
2559 | switch (up->port.iotype) { | |
1da177e4 LT |
2560 | case UPIO_HUB6: |
2561 | case UPIO_PORT: | |
2562 | release_region(up->port.iobase + offset, size); | |
2563 | break; | |
2564 | } | |
2565 | } | |
2566 | ||
2567 | static void serial8250_release_port(struct uart_port *port) | |
2568 | { | |
2569 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2570 | ||
2571 | serial8250_release_std_resource(up); | |
2572 | if (up->port.type == PORT_RSA) | |
2573 | serial8250_release_rsa_resource(up); | |
2574 | } | |
2575 | ||
2576 | static int serial8250_request_port(struct uart_port *port) | |
2577 | { | |
2578 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2579 | int ret = 0; | |
2580 | ||
2581 | ret = serial8250_request_std_resource(up); | |
2582 | if (ret == 0 && up->port.type == PORT_RSA) { | |
2583 | ret = serial8250_request_rsa_resource(up); | |
2584 | if (ret < 0) | |
2585 | serial8250_release_std_resource(up); | |
2586 | } | |
2587 | ||
2588 | return ret; | |
2589 | } | |
2590 | ||
2591 | static void serial8250_config_port(struct uart_port *port, int flags) | |
2592 | { | |
2593 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2594 | int probeflags = PROBE_ANY; | |
2595 | int ret; | |
2596 | ||
1da177e4 LT |
2597 | /* |
2598 | * Find the region that we can probe for. This in turn | |
2599 | * tells us whether we can probe for the type of port. | |
2600 | */ | |
2601 | ret = serial8250_request_std_resource(up); | |
2602 | if (ret < 0) | |
2603 | return; | |
2604 | ||
2605 | ret = serial8250_request_rsa_resource(up); | |
2606 | if (ret < 0) | |
2607 | probeflags &= ~PROBE_RSA; | |
2608 | ||
b8e7e40a AC |
2609 | if (up->port.iotype != up->cur_iotype) |
2610 | set_io_from_upio(port); | |
2611 | ||
1da177e4 LT |
2612 | if (flags & UART_CONFIG_TYPE) |
2613 | autoconfig(up, probeflags); | |
b2b13cdf | 2614 | |
b2b13cdf ML |
2615 | /* if access method is AU, it is a 16550 with a quirk */ |
2616 | if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) | |
2617 | up->bugs |= UART_BUG_NOMSR; | |
b2b13cdf | 2618 | |
1da177e4 LT |
2619 | if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) |
2620 | autoconfig_irq(up); | |
2621 | ||
2622 | if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) | |
2623 | serial8250_release_rsa_resource(up); | |
2624 | if (up->port.type == PORT_UNKNOWN) | |
2625 | serial8250_release_std_resource(up); | |
2626 | } | |
2627 | ||
2628 | static int | |
2629 | serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) | |
2630 | { | |
a62c4133 | 2631 | if (ser->irq >= nr_irqs || ser->irq < 0 || |
1da177e4 LT |
2632 | ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || |
2633 | ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || | |
2634 | ser->type == PORT_STARTECH) | |
2635 | return -EINVAL; | |
2636 | return 0; | |
2637 | } | |
2638 | ||
2639 | static const char * | |
2640 | serial8250_type(struct uart_port *port) | |
2641 | { | |
2642 | int type = port->type; | |
2643 | ||
2644 | if (type >= ARRAY_SIZE(uart_config)) | |
2645 | type = 0; | |
2646 | return uart_config[type].name; | |
2647 | } | |
2648 | ||
2649 | static struct uart_ops serial8250_pops = { | |
2650 | .tx_empty = serial8250_tx_empty, | |
2651 | .set_mctrl = serial8250_set_mctrl, | |
2652 | .get_mctrl = serial8250_get_mctrl, | |
2653 | .stop_tx = serial8250_stop_tx, | |
2654 | .start_tx = serial8250_start_tx, | |
2655 | .stop_rx = serial8250_stop_rx, | |
2656 | .enable_ms = serial8250_enable_ms, | |
2657 | .break_ctl = serial8250_break_ctl, | |
2658 | .startup = serial8250_startup, | |
2659 | .shutdown = serial8250_shutdown, | |
2660 | .set_termios = serial8250_set_termios, | |
dc77f161 | 2661 | .set_ldisc = serial8250_set_ldisc, |
1da177e4 LT |
2662 | .pm = serial8250_pm, |
2663 | .type = serial8250_type, | |
2664 | .release_port = serial8250_release_port, | |
2665 | .request_port = serial8250_request_port, | |
2666 | .config_port = serial8250_config_port, | |
2667 | .verify_port = serial8250_verify_port, | |
f2d937f3 JW |
2668 | #ifdef CONFIG_CONSOLE_POLL |
2669 | .poll_get_char = serial8250_get_poll_char, | |
2670 | .poll_put_char = serial8250_put_poll_char, | |
2671 | #endif | |
1da177e4 LT |
2672 | }; |
2673 | ||
2674 | static struct uart_8250_port serial8250_ports[UART_NR]; | |
2675 | ||
af7f3743 AC |
2676 | static void (*serial8250_isa_config)(int port, struct uart_port *up, |
2677 | unsigned short *capabilities); | |
2678 | ||
2679 | void serial8250_set_isa_configurator( | |
2680 | void (*v)(int port, struct uart_port *up, unsigned short *capabilities)) | |
2681 | { | |
2682 | serial8250_isa_config = v; | |
2683 | } | |
2684 | EXPORT_SYMBOL(serial8250_set_isa_configurator); | |
2685 | ||
1da177e4 LT |
2686 | static void __init serial8250_isa_init_ports(void) |
2687 | { | |
2688 | struct uart_8250_port *up; | |
2689 | static int first = 1; | |
4c0ebb80 | 2690 | int i, irqflag = 0; |
1da177e4 LT |
2691 | |
2692 | if (!first) | |
2693 | return; | |
2694 | first = 0; | |
2695 | ||
a61c2d78 | 2696 | for (i = 0; i < nr_uarts; i++) { |
1da177e4 LT |
2697 | struct uart_8250_port *up = &serial8250_ports[i]; |
2698 | ||
2699 | up->port.line = i; | |
2700 | spin_lock_init(&up->port.lock); | |
2701 | ||
2702 | init_timer(&up->timer); | |
2703 | up->timer.function = serial8250_timeout; | |
2704 | ||
2705 | /* | |
2706 | * ALPHA_KLUDGE_MCR needs to be killed. | |
2707 | */ | |
2708 | up->mcr_mask = ~ALPHA_KLUDGE_MCR; | |
2709 | up->mcr_force = ALPHA_KLUDGE_MCR; | |
2710 | ||
2711 | up->port.ops = &serial8250_pops; | |
2712 | } | |
2713 | ||
4c0ebb80 AGR |
2714 | if (share_irqs) |
2715 | irqflag = IRQF_SHARED; | |
2716 | ||
44454bcd | 2717 | for (i = 0, up = serial8250_ports; |
a61c2d78 | 2718 | i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; |
1da177e4 LT |
2719 | i++, up++) { |
2720 | up->port.iobase = old_serial_port[i].port; | |
2721 | up->port.irq = irq_canonicalize(old_serial_port[i].irq); | |
1c2f0493 | 2722 | up->port.irqflags = old_serial_port[i].irqflags; |
1da177e4 LT |
2723 | up->port.uartclk = old_serial_port[i].baud_base * 16; |
2724 | up->port.flags = old_serial_port[i].flags; | |
2725 | up->port.hub6 = old_serial_port[i].hub6; | |
2726 | up->port.membase = old_serial_port[i].iomem_base; | |
2727 | up->port.iotype = old_serial_port[i].io_type; | |
2728 | up->port.regshift = old_serial_port[i].iomem_reg_shift; | |
7d6a07d1 | 2729 | set_io_from_upio(&up->port); |
4c0ebb80 | 2730 | up->port.irqflags |= irqflag; |
af7f3743 AC |
2731 | if (serial8250_isa_config != NULL) |
2732 | serial8250_isa_config(i, &up->port, &up->capabilities); | |
2733 | ||
1da177e4 LT |
2734 | } |
2735 | } | |
2736 | ||
b5d228cc SL |
2737 | static void |
2738 | serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) | |
2739 | { | |
2740 | up->port.type = type; | |
2741 | up->port.fifosize = uart_config[type].fifo_size; | |
2742 | up->capabilities = uart_config[type].flags; | |
2743 | up->tx_loadsz = uart_config[type].tx_loadsz; | |
2744 | } | |
2745 | ||
1da177e4 LT |
2746 | static void __init |
2747 | serial8250_register_ports(struct uart_driver *drv, struct device *dev) | |
2748 | { | |
2749 | int i; | |
2750 | ||
b8e7e40a AC |
2751 | for (i = 0; i < nr_uarts; i++) { |
2752 | struct uart_8250_port *up = &serial8250_ports[i]; | |
2753 | up->cur_iotype = 0xFF; | |
2754 | } | |
2755 | ||
1da177e4 LT |
2756 | serial8250_isa_init_ports(); |
2757 | ||
a61c2d78 | 2758 | for (i = 0; i < nr_uarts; i++) { |
1da177e4 LT |
2759 | struct uart_8250_port *up = &serial8250_ports[i]; |
2760 | ||
2761 | up->port.dev = dev; | |
b5d228cc SL |
2762 | |
2763 | if (up->port.flags & UPF_FIXED_TYPE) | |
2764 | serial8250_init_fixed_type_port(up, up->port.type); | |
2765 | ||
1da177e4 LT |
2766 | uart_add_one_port(drv, &up->port); |
2767 | } | |
2768 | } | |
2769 | ||
2770 | #ifdef CONFIG_SERIAL_8250_CONSOLE | |
2771 | ||
d358788f RK |
2772 | static void serial8250_console_putchar(struct uart_port *port, int ch) |
2773 | { | |
2774 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2775 | ||
2776 | wait_for_xmitr(up, UART_LSR_THRE); | |
2777 | serial_out(up, UART_TX, ch); | |
2778 | } | |
2779 | ||
1da177e4 LT |
2780 | /* |
2781 | * Print a string to the serial port trying not to disturb | |
2782 | * any possible real use of the port... | |
2783 | * | |
2784 | * The console_lock must be held when we get here. | |
2785 | */ | |
2786 | static void | |
2787 | serial8250_console_write(struct console *co, const char *s, unsigned int count) | |
2788 | { | |
2789 | struct uart_8250_port *up = &serial8250_ports[co->index]; | |
d8a5a8d7 | 2790 | unsigned long flags; |
1da177e4 | 2791 | unsigned int ier; |
d8a5a8d7 | 2792 | int locked = 1; |
1da177e4 | 2793 | |
78512ece AM |
2794 | touch_nmi_watchdog(); |
2795 | ||
68aa2c0d AM |
2796 | local_irq_save(flags); |
2797 | if (up->port.sysrq) { | |
2798 | /* serial8250_handle_port() already took the lock */ | |
2799 | locked = 0; | |
2800 | } else if (oops_in_progress) { | |
2801 | locked = spin_trylock(&up->port.lock); | |
d8a5a8d7 | 2802 | } else |
68aa2c0d | 2803 | spin_lock(&up->port.lock); |
d8a5a8d7 | 2804 | |
1da177e4 | 2805 | /* |
dc7bf130 | 2806 | * First save the IER then disable the interrupts |
1da177e4 LT |
2807 | */ |
2808 | ier = serial_in(up, UART_IER); | |
2809 | ||
2810 | if (up->capabilities & UART_CAP_UUE) | |
2811 | serial_out(up, UART_IER, UART_IER_UUE); | |
2812 | else | |
2813 | serial_out(up, UART_IER, 0); | |
2814 | ||
d358788f | 2815 | uart_console_write(&up->port, s, count, serial8250_console_putchar); |
1da177e4 LT |
2816 | |
2817 | /* | |
2818 | * Finally, wait for transmitter to become empty | |
2819 | * and restore the IER | |
2820 | */ | |
f91a3715 | 2821 | wait_for_xmitr(up, BOTH_EMPTY); |
a88d75b2 | 2822 | serial_out(up, UART_IER, ier); |
d8a5a8d7 | 2823 | |
ad4c2aa6 CM |
2824 | /* |
2825 | * The receive handling will happen properly because the | |
2826 | * receive ready bit will still be set; it is not cleared | |
2827 | * on read. However, modem control will not, we must | |
2828 | * call it if we have saved something in the saved flags | |
2829 | * while processing with interrupts off. | |
2830 | */ | |
2831 | if (up->msr_saved_flags) | |
2832 | check_modem_status(up); | |
2833 | ||
d8a5a8d7 | 2834 | if (locked) |
68aa2c0d AM |
2835 | spin_unlock(&up->port.lock); |
2836 | local_irq_restore(flags); | |
1da177e4 LT |
2837 | } |
2838 | ||
118c0ace | 2839 | static int __init serial8250_console_setup(struct console *co, char *options) |
1da177e4 LT |
2840 | { |
2841 | struct uart_port *port; | |
2842 | int baud = 9600; | |
2843 | int bits = 8; | |
2844 | int parity = 'n'; | |
2845 | int flow = 'n'; | |
2846 | ||
2847 | /* | |
2848 | * Check whether an invalid uart number has been specified, and | |
2849 | * if so, search for the first available port that does have | |
2850 | * console support. | |
2851 | */ | |
a61c2d78 | 2852 | if (co->index >= nr_uarts) |
1da177e4 LT |
2853 | co->index = 0; |
2854 | port = &serial8250_ports[co->index].port; | |
2855 | if (!port->iobase && !port->membase) | |
2856 | return -ENODEV; | |
2857 | ||
2858 | if (options) | |
2859 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
2860 | ||
2861 | return uart_set_options(port, co, baud, parity, bits, flow); | |
2862 | } | |
2863 | ||
b6b1d877 | 2864 | static int serial8250_console_early_setup(void) |
18a8bd94 YL |
2865 | { |
2866 | return serial8250_find_port_for_earlycon(); | |
2867 | } | |
2868 | ||
1da177e4 LT |
2869 | static struct console serial8250_console = { |
2870 | .name = "ttyS", | |
2871 | .write = serial8250_console_write, | |
2872 | .device = uart_console_device, | |
2873 | .setup = serial8250_console_setup, | |
18a8bd94 | 2874 | .early_setup = serial8250_console_early_setup, |
1da177e4 LT |
2875 | .flags = CON_PRINTBUFFER, |
2876 | .index = -1, | |
2877 | .data = &serial8250_reg, | |
2878 | }; | |
2879 | ||
2880 | static int __init serial8250_console_init(void) | |
2881 | { | |
05d81d22 EB |
2882 | if (nr_uarts > UART_NR) |
2883 | nr_uarts = UART_NR; | |
2884 | ||
1da177e4 LT |
2885 | serial8250_isa_init_ports(); |
2886 | register_console(&serial8250_console); | |
2887 | return 0; | |
2888 | } | |
2889 | console_initcall(serial8250_console_init); | |
2890 | ||
18a8bd94 | 2891 | int serial8250_find_port(struct uart_port *p) |
1da177e4 LT |
2892 | { |
2893 | int line; | |
2894 | struct uart_port *port; | |
2895 | ||
a61c2d78 | 2896 | for (line = 0; line < nr_uarts; line++) { |
1da177e4 | 2897 | port = &serial8250_ports[line].port; |
50aec3b5 | 2898 | if (uart_match_port(p, port)) |
1da177e4 LT |
2899 | return line; |
2900 | } | |
2901 | return -ENODEV; | |
2902 | } | |
2903 | ||
1da177e4 LT |
2904 | #define SERIAL8250_CONSOLE &serial8250_console |
2905 | #else | |
2906 | #define SERIAL8250_CONSOLE NULL | |
2907 | #endif | |
2908 | ||
2909 | static struct uart_driver serial8250_reg = { | |
2910 | .owner = THIS_MODULE, | |
2911 | .driver_name = "serial", | |
1da177e4 LT |
2912 | .dev_name = "ttyS", |
2913 | .major = TTY_MAJOR, | |
2914 | .minor = 64, | |
1da177e4 LT |
2915 | .cons = SERIAL8250_CONSOLE, |
2916 | }; | |
2917 | ||
d856c666 RK |
2918 | /* |
2919 | * early_serial_setup - early registration for 8250 ports | |
2920 | * | |
2921 | * Setup an 8250 port structure prior to console initialisation. Use | |
2922 | * after console initialisation will cause undefined behaviour. | |
2923 | */ | |
1da177e4 LT |
2924 | int __init early_serial_setup(struct uart_port *port) |
2925 | { | |
b430428a DD |
2926 | struct uart_port *p; |
2927 | ||
1da177e4 LT |
2928 | if (port->line >= ARRAY_SIZE(serial8250_ports)) |
2929 | return -ENODEV; | |
2930 | ||
2931 | serial8250_isa_init_ports(); | |
b430428a DD |
2932 | p = &serial8250_ports[port->line].port; |
2933 | p->iobase = port->iobase; | |
2934 | p->membase = port->membase; | |
2935 | p->irq = port->irq; | |
1c2f0493 | 2936 | p->irqflags = port->irqflags; |
b430428a DD |
2937 | p->uartclk = port->uartclk; |
2938 | p->fifosize = port->fifosize; | |
2939 | p->regshift = port->regshift; | |
2940 | p->iotype = port->iotype; | |
2941 | p->flags = port->flags; | |
2942 | p->mapbase = port->mapbase; | |
2943 | p->private_data = port->private_data; | |
125c97d8 HD |
2944 | p->type = port->type; |
2945 | p->line = port->line; | |
7d6a07d1 DD |
2946 | |
2947 | set_io_from_upio(p); | |
2948 | if (port->serial_in) | |
2949 | p->serial_in = port->serial_in; | |
2950 | if (port->serial_out) | |
2951 | p->serial_out = port->serial_out; | |
2952 | ||
1da177e4 LT |
2953 | return 0; |
2954 | } | |
2955 | ||
2956 | /** | |
2957 | * serial8250_suspend_port - suspend one serial port | |
2958 | * @line: serial line number | |
1da177e4 LT |
2959 | * |
2960 | * Suspend one serial port. | |
2961 | */ | |
2962 | void serial8250_suspend_port(int line) | |
2963 | { | |
2964 | uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); | |
2965 | } | |
2966 | ||
2967 | /** | |
2968 | * serial8250_resume_port - resume one serial port | |
2969 | * @line: serial line number | |
1da177e4 LT |
2970 | * |
2971 | * Resume one serial port. | |
2972 | */ | |
2973 | void serial8250_resume_port(int line) | |
2974 | { | |
b5b82df6 DW |
2975 | struct uart_8250_port *up = &serial8250_ports[line]; |
2976 | ||
2977 | if (up->capabilities & UART_NATSEMI) { | |
2978 | unsigned char tmp; | |
2979 | ||
2980 | /* Ensure it's still in high speed mode */ | |
2981 | serial_outp(up, UART_LCR, 0xE0); | |
2982 | ||
2983 | tmp = serial_in(up, 0x04); /* EXCR2 */ | |
2984 | tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ | |
2985 | tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ | |
2986 | serial_outp(up, 0x04, tmp); | |
2987 | ||
2988 | serial_outp(up, UART_LCR, 0); | |
2989 | } | |
2990 | uart_resume_port(&serial8250_reg, &up->port); | |
1da177e4 LT |
2991 | } |
2992 | ||
2993 | /* | |
2994 | * Register a set of serial devices attached to a platform device. The | |
2995 | * list is terminated with a zero flags entry, which means we expect | |
2996 | * all entries to have at least UPF_BOOT_AUTOCONF set. | |
2997 | */ | |
3ae5eaec | 2998 | static int __devinit serial8250_probe(struct platform_device *dev) |
1da177e4 | 2999 | { |
3ae5eaec | 3000 | struct plat_serial8250_port *p = dev->dev.platform_data; |
1da177e4 | 3001 | struct uart_port port; |
4c0ebb80 | 3002 | int ret, i, irqflag = 0; |
1da177e4 LT |
3003 | |
3004 | memset(&port, 0, sizeof(struct uart_port)); | |
3005 | ||
4c0ebb80 AGR |
3006 | if (share_irqs) |
3007 | irqflag = IRQF_SHARED; | |
3008 | ||
ec9f47cd | 3009 | for (i = 0; p && p->flags != 0; p++, i++) { |
74a19741 WN |
3010 | port.iobase = p->iobase; |
3011 | port.membase = p->membase; | |
3012 | port.irq = p->irq; | |
1c2f0493 | 3013 | port.irqflags = p->irqflags; |
74a19741 WN |
3014 | port.uartclk = p->uartclk; |
3015 | port.regshift = p->regshift; | |
3016 | port.iotype = p->iotype; | |
3017 | port.flags = p->flags; | |
3018 | port.mapbase = p->mapbase; | |
3019 | port.hub6 = p->hub6; | |
3020 | port.private_data = p->private_data; | |
8e23fcc8 | 3021 | port.type = p->type; |
7d6a07d1 DD |
3022 | port.serial_in = p->serial_in; |
3023 | port.serial_out = p->serial_out; | |
235dae5d | 3024 | port.set_termios = p->set_termios; |
c161afe9 | 3025 | port.pm = p->pm; |
74a19741 | 3026 | port.dev = &dev->dev; |
4c0ebb80 | 3027 | port.irqflags |= irqflag; |
ec9f47cd RK |
3028 | ret = serial8250_register_port(&port); |
3029 | if (ret < 0) { | |
3ae5eaec | 3030 | dev_err(&dev->dev, "unable to register port at index %d " |
4f640efb JB |
3031 | "(IO%lx MEM%llx IRQ%d): %d\n", i, |
3032 | p->iobase, (unsigned long long)p->mapbase, | |
3033 | p->irq, ret); | |
ec9f47cd | 3034 | } |
1da177e4 LT |
3035 | } |
3036 | return 0; | |
3037 | } | |
3038 | ||
3039 | /* | |
3040 | * Remove serial ports registered against a platform device. | |
3041 | */ | |
3ae5eaec | 3042 | static int __devexit serial8250_remove(struct platform_device *dev) |
1da177e4 LT |
3043 | { |
3044 | int i; | |
3045 | ||
a61c2d78 | 3046 | for (i = 0; i < nr_uarts; i++) { |
1da177e4 LT |
3047 | struct uart_8250_port *up = &serial8250_ports[i]; |
3048 | ||
3ae5eaec | 3049 | if (up->port.dev == &dev->dev) |
1da177e4 LT |
3050 | serial8250_unregister_port(i); |
3051 | } | |
3052 | return 0; | |
3053 | } | |
3054 | ||
3ae5eaec | 3055 | static int serial8250_suspend(struct platform_device *dev, pm_message_t state) |
1da177e4 LT |
3056 | { |
3057 | int i; | |
3058 | ||
1da177e4 LT |
3059 | for (i = 0; i < UART_NR; i++) { |
3060 | struct uart_8250_port *up = &serial8250_ports[i]; | |
3061 | ||
3ae5eaec | 3062 | if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) |
1da177e4 LT |
3063 | uart_suspend_port(&serial8250_reg, &up->port); |
3064 | } | |
3065 | ||
3066 | return 0; | |
3067 | } | |
3068 | ||
3ae5eaec | 3069 | static int serial8250_resume(struct platform_device *dev) |
1da177e4 LT |
3070 | { |
3071 | int i; | |
3072 | ||
1da177e4 LT |
3073 | for (i = 0; i < UART_NR; i++) { |
3074 | struct uart_8250_port *up = &serial8250_ports[i]; | |
3075 | ||
3ae5eaec | 3076 | if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) |
b5b82df6 | 3077 | serial8250_resume_port(i); |
1da177e4 LT |
3078 | } |
3079 | ||
3080 | return 0; | |
3081 | } | |
3082 | ||
3ae5eaec | 3083 | static struct platform_driver serial8250_isa_driver = { |
1da177e4 LT |
3084 | .probe = serial8250_probe, |
3085 | .remove = __devexit_p(serial8250_remove), | |
3086 | .suspend = serial8250_suspend, | |
3087 | .resume = serial8250_resume, | |
3ae5eaec RK |
3088 | .driver = { |
3089 | .name = "serial8250", | |
7493a314 | 3090 | .owner = THIS_MODULE, |
3ae5eaec | 3091 | }, |
1da177e4 LT |
3092 | }; |
3093 | ||
3094 | /* | |
3095 | * This "device" covers _all_ ISA 8250-compatible serial devices listed | |
3096 | * in the table in include/asm/serial.h | |
3097 | */ | |
3098 | static struct platform_device *serial8250_isa_devs; | |
3099 | ||
3100 | /* | |
3101 | * serial8250_register_port and serial8250_unregister_port allows for | |
3102 | * 16x50 serial ports to be configured at run-time, to support PCMCIA | |
3103 | * modems and PCI multiport cards. | |
3104 | */ | |
f392ecfa | 3105 | static DEFINE_MUTEX(serial_mutex); |
1da177e4 LT |
3106 | |
3107 | static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) | |
3108 | { | |
3109 | int i; | |
3110 | ||
3111 | /* | |
3112 | * First, find a port entry which matches. | |
3113 | */ | |
a61c2d78 | 3114 | for (i = 0; i < nr_uarts; i++) |
1da177e4 LT |
3115 | if (uart_match_port(&serial8250_ports[i].port, port)) |
3116 | return &serial8250_ports[i]; | |
3117 | ||
3118 | /* | |
3119 | * We didn't find a matching entry, so look for the first | |
3120 | * free entry. We look for one which hasn't been previously | |
3121 | * used (indicated by zero iobase). | |
3122 | */ | |
a61c2d78 | 3123 | for (i = 0; i < nr_uarts; i++) |
1da177e4 LT |
3124 | if (serial8250_ports[i].port.type == PORT_UNKNOWN && |
3125 | serial8250_ports[i].port.iobase == 0) | |
3126 | return &serial8250_ports[i]; | |
3127 | ||
3128 | /* | |
3129 | * That also failed. Last resort is to find any entry which | |
3130 | * doesn't have a real port associated with it. | |
3131 | */ | |
a61c2d78 | 3132 | for (i = 0; i < nr_uarts; i++) |
1da177e4 LT |
3133 | if (serial8250_ports[i].port.type == PORT_UNKNOWN) |
3134 | return &serial8250_ports[i]; | |
3135 | ||
3136 | return NULL; | |
3137 | } | |
3138 | ||
3139 | /** | |
3140 | * serial8250_register_port - register a serial port | |
3141 | * @port: serial port template | |
3142 | * | |
3143 | * Configure the serial port specified by the request. If the | |
3144 | * port exists and is in use, it is hung up and unregistered | |
3145 | * first. | |
3146 | * | |
3147 | * The port is then probed and if necessary the IRQ is autodetected | |
3148 | * If this fails an error is returned. | |
3149 | * | |
3150 | * On success the port is ready to use and the line number is returned. | |
3151 | */ | |
3152 | int serial8250_register_port(struct uart_port *port) | |
3153 | { | |
3154 | struct uart_8250_port *uart; | |
3155 | int ret = -ENOSPC; | |
3156 | ||
3157 | if (port->uartclk == 0) | |
3158 | return -EINVAL; | |
3159 | ||
f392ecfa | 3160 | mutex_lock(&serial_mutex); |
1da177e4 LT |
3161 | |
3162 | uart = serial8250_find_match_or_unused(port); | |
3163 | if (uart) { | |
3164 | uart_remove_one_port(&serial8250_reg, &uart->port); | |
3165 | ||
74a19741 WN |
3166 | uart->port.iobase = port->iobase; |
3167 | uart->port.membase = port->membase; | |
3168 | uart->port.irq = port->irq; | |
1c2f0493 | 3169 | uart->port.irqflags = port->irqflags; |
74a19741 WN |
3170 | uart->port.uartclk = port->uartclk; |
3171 | uart->port.fifosize = port->fifosize; | |
3172 | uart->port.regshift = port->regshift; | |
3173 | uart->port.iotype = port->iotype; | |
3174 | uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; | |
3175 | uart->port.mapbase = port->mapbase; | |
3176 | uart->port.private_data = port->private_data; | |
1da177e4 LT |
3177 | if (port->dev) |
3178 | uart->port.dev = port->dev; | |
8e23fcc8 | 3179 | |
b5d228cc SL |
3180 | if (port->flags & UPF_FIXED_TYPE) |
3181 | serial8250_init_fixed_type_port(uart, port->type); | |
8e23fcc8 | 3182 | |
7d6a07d1 DD |
3183 | set_io_from_upio(&uart->port); |
3184 | /* Possibly override default I/O functions. */ | |
3185 | if (port->serial_in) | |
3186 | uart->port.serial_in = port->serial_in; | |
3187 | if (port->serial_out) | |
3188 | uart->port.serial_out = port->serial_out; | |
235dae5d PL |
3189 | /* Possibly override set_termios call */ |
3190 | if (port->set_termios) | |
3191 | uart->port.set_termios = port->set_termios; | |
c161afe9 ML |
3192 | if (port->pm) |
3193 | uart->port.pm = port->pm; | |
1da177e4 | 3194 | |
af7f3743 AC |
3195 | if (serial8250_isa_config != NULL) |
3196 | serial8250_isa_config(0, &uart->port, | |
3197 | &uart->capabilities); | |
3198 | ||
1da177e4 LT |
3199 | ret = uart_add_one_port(&serial8250_reg, &uart->port); |
3200 | if (ret == 0) | |
3201 | ret = uart->port.line; | |
3202 | } | |
f392ecfa | 3203 | mutex_unlock(&serial_mutex); |
1da177e4 LT |
3204 | |
3205 | return ret; | |
3206 | } | |
3207 | EXPORT_SYMBOL(serial8250_register_port); | |
3208 | ||
3209 | /** | |
3210 | * serial8250_unregister_port - remove a 16x50 serial port at runtime | |
3211 | * @line: serial line number | |
3212 | * | |
3213 | * Remove one serial port. This may not be called from interrupt | |
3214 | * context. We hand the port back to the our control. | |
3215 | */ | |
3216 | void serial8250_unregister_port(int line) | |
3217 | { | |
3218 | struct uart_8250_port *uart = &serial8250_ports[line]; | |
3219 | ||
f392ecfa | 3220 | mutex_lock(&serial_mutex); |
1da177e4 LT |
3221 | uart_remove_one_port(&serial8250_reg, &uart->port); |
3222 | if (serial8250_isa_devs) { | |
3223 | uart->port.flags &= ~UPF_BOOT_AUTOCONF; | |
3224 | uart->port.type = PORT_UNKNOWN; | |
3225 | uart->port.dev = &serial8250_isa_devs->dev; | |
3226 | uart_add_one_port(&serial8250_reg, &uart->port); | |
3227 | } else { | |
3228 | uart->port.dev = NULL; | |
3229 | } | |
f392ecfa | 3230 | mutex_unlock(&serial_mutex); |
1da177e4 LT |
3231 | } |
3232 | EXPORT_SYMBOL(serial8250_unregister_port); | |
3233 | ||
3234 | static int __init serial8250_init(void) | |
3235 | { | |
25db8ad5 | 3236 | int ret; |
1da177e4 | 3237 | |
a61c2d78 DJ |
3238 | if (nr_uarts > UART_NR) |
3239 | nr_uarts = UART_NR; | |
3240 | ||
f1fb9bb8 | 3241 | printk(KERN_INFO "Serial: 8250/16550 driver, " |
a61c2d78 | 3242 | "%d ports, IRQ sharing %sabled\n", nr_uarts, |
1da177e4 LT |
3243 | share_irqs ? "en" : "dis"); |
3244 | ||
b70ac771 DM |
3245 | #ifdef CONFIG_SPARC |
3246 | ret = sunserial_register_minors(&serial8250_reg, UART_NR); | |
3247 | #else | |
3248 | serial8250_reg.nr = UART_NR; | |
1da177e4 | 3249 | ret = uart_register_driver(&serial8250_reg); |
b70ac771 | 3250 | #endif |
1da177e4 LT |
3251 | if (ret) |
3252 | goto out; | |
3253 | ||
7493a314 DT |
3254 | serial8250_isa_devs = platform_device_alloc("serial8250", |
3255 | PLAT8250_DEV_LEGACY); | |
3256 | if (!serial8250_isa_devs) { | |
3257 | ret = -ENOMEM; | |
bc965a7f | 3258 | goto unreg_uart_drv; |
1da177e4 LT |
3259 | } |
3260 | ||
7493a314 DT |
3261 | ret = platform_device_add(serial8250_isa_devs); |
3262 | if (ret) | |
3263 | goto put_dev; | |
3264 | ||
1da177e4 LT |
3265 | serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); |
3266 | ||
bc965a7f RK |
3267 | ret = platform_driver_register(&serial8250_isa_driver); |
3268 | if (ret == 0) | |
3269 | goto out; | |
1da177e4 | 3270 | |
bc965a7f | 3271 | platform_device_del(serial8250_isa_devs); |
25db8ad5 | 3272 | put_dev: |
7493a314 | 3273 | platform_device_put(serial8250_isa_devs); |
25db8ad5 | 3274 | unreg_uart_drv: |
b70ac771 DM |
3275 | #ifdef CONFIG_SPARC |
3276 | sunserial_unregister_minors(&serial8250_reg, UART_NR); | |
3277 | #else | |
1da177e4 | 3278 | uart_unregister_driver(&serial8250_reg); |
b70ac771 | 3279 | #endif |
25db8ad5 | 3280 | out: |
1da177e4 LT |
3281 | return ret; |
3282 | } | |
3283 | ||
3284 | static void __exit serial8250_exit(void) | |
3285 | { | |
3286 | struct platform_device *isa_dev = serial8250_isa_devs; | |
3287 | ||
3288 | /* | |
3289 | * This tells serial8250_unregister_port() not to re-register | |
3290 | * the ports (thereby making serial8250_isa_driver permanently | |
3291 | * in use.) | |
3292 | */ | |
3293 | serial8250_isa_devs = NULL; | |
3294 | ||
3ae5eaec | 3295 | platform_driver_unregister(&serial8250_isa_driver); |
1da177e4 LT |
3296 | platform_device_unregister(isa_dev); |
3297 | ||
b70ac771 DM |
3298 | #ifdef CONFIG_SPARC |
3299 | sunserial_unregister_minors(&serial8250_reg, UART_NR); | |
3300 | #else | |
1da177e4 | 3301 | uart_unregister_driver(&serial8250_reg); |
b70ac771 | 3302 | #endif |
1da177e4 LT |
3303 | } |
3304 | ||
3305 | module_init(serial8250_init); | |
3306 | module_exit(serial8250_exit); | |
3307 | ||
3308 | EXPORT_SYMBOL(serial8250_suspend_port); | |
3309 | EXPORT_SYMBOL(serial8250_resume_port); | |
3310 | ||
3311 | MODULE_LICENSE("GPL"); | |
d87a6d95 | 3312 | MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); |
1da177e4 LT |
3313 | |
3314 | module_param(share_irqs, uint, 0644); | |
3315 | MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" | |
3316 | " (unsafe)"); | |
3317 | ||
a61c2d78 DJ |
3318 | module_param(nr_uarts, uint, 0644); |
3319 | MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); | |
3320 | ||
d41a4b51 CE |
3321 | module_param(skip_txen_test, uint, 0644); |
3322 | MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); | |
3323 | ||
1da177e4 LT |
3324 | #ifdef CONFIG_SERIAL_8250_RSA |
3325 | module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); | |
3326 | MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); | |
3327 | #endif | |
3328 | MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); |