[linux-2.6-block.git] / drivers / scsi / t128.h

/*
 * Trantor T128/T128F/T228 defines
 *	Note : architecturally, the T100 and T128 are different and won't work
 *
 * Copyright 1993, Drew Eckhardt
 *	Visionary Computing
 *	(Unix and Linux consulting and custom programming)
 *	drew@colorado.edu
 *      +1 (303) 440-4894
 *
 * For more information, please consult
 *
 * Trantor Systems, Ltd.
 * T128/T128F/T228 SCSI Host Adapter
 * Hardware Specifications
 *
 * Trantor Systems, Ltd.
 * 5415 Randall Place
 * Fremont, CA 94538
 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910
 */

#ifndef T128_H
#define T128_H

/*
 * The trantor boards are memory mapped. They use an NCR5380 or
 * equivalent (my sample board had part second sourced from ZILOG).
 * NCR's recommended "Pseudo-DMA" architecture is used, where
 * a PAL drives the DMA signals on the 5380 allowing fast, blind
 * transfers with proper handshaking.
 */

/*
 * Note : a boot switch is provided for the purpose of informing the
 * firmware to boot or not boot from attached SCSI devices.  So, I imagine
 * there are fewer people who've yanked the ROM like they do on the Seagate
 * to make bootup faster, and I'll probably use this for autodetection.
 */
#define T_ROM_OFFSET		0

/*
 * Note : my sample board *WAS NOT* populated with the SRAM, so this
 * can't be used for autodetection without a ROM present.
 */
#define T_RAM_OFFSET		0x1800

/*
 * All of the registers are allocated 32 bytes of address space, except
 * for the data register (read/write to/from the 5380 in pseudo-DMA mode)
 */ 
#define T_CONTROL_REG_OFFSET	0x1c00	/* rw */
#define T_CR_INT		0x10	/* Enable interrupts */
#define T_CR_CT			0x02	/* Reset watchdog timer */

#define T_STATUS_REG_OFFSET	0x1c20	/* ro */
#define T_ST_BOOT		0x80	/* Boot switch */
#define T_ST_S3			0x40	/* User settable switches, */
#define T_ST_S2			0x20	/* read 0 when switch is on, 1 off */
#define T_ST_S1			0x10
#define T_ST_PS2		0x08	/* Set for Microchannel 228 */
#define T_ST_RDY		0x04	/* 5380 DRQ */
#define T_ST_TIM		0x02	/* indicates 40us watchdog timer fired */
#define T_ST_ZERO		0x01	/* Always zero */

#define T_5380_OFFSET		0x1d00	/* 8 registers here, see NCR5380.h */

#define T_DATA_REG_OFFSET	0x1e00	/* rw 512 bytes long */

#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif

#ifndef CAN_QUEUE
#define CAN_QUEUE 32
#endif

#define NCR5380_implementation_fields \
    void __iomem *base

#define NCR5380_local_declare() \
    void __iomem *base

#define NCR5380_setup(instance) \
    base = ((struct NCR5380_hostdata *)(instance->hostdata))->base

#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))

#define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))

#define NCR5380_intr t128_intr
#define NCR5380_queue_command t128_queue_command
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
#define NCR5380_info t128_info
#define NCR5380_show_info t128_show_info
#define NCR5380_write_info t128_write_info

/* 15 14 12 10 7 5 3
   1101 0100 1010 1000 */

#define T128_IRQS 0xc4a8

#endif /* T128_H */
Commit	Line	Data
1da177e4 LT	1	/*
	2	* Trantor T128/T128F/T228 defines
	3	* Note : architecturally, the T100 and T128 are different and won't work
	4	*
	5	* Copyright 1993, Drew Eckhardt
	6	* Visionary Computing
	7	* (Unix and Linux consulting and custom programming)
	8	* drew@colorado.edu
	9	* +1 (303) 440-4894
	10	*
667c667f	11	* For more information, please consult
1da177e4 LT	12	*
	13	* Trantor Systems, Ltd.
	14	* T128/T128F/T228 SCSI Host Adapter
	15	* Hardware Specifications
667c667f H	16	*
667c667f H	17	* Trantor Systems, Ltd.
1da177e4 LT	18	* 5415 Randall Place
	19	* Fremont, CA 94538
	20	* 1+ (415) 770-1400, FAX 1+ (415) 770-9910
1da177e4 LT	21	*/
1da177e4 LT	22
1da177e4 LT	23	#ifndef T128_H
	24	#define T128_H
	25
1da177e4	26	/*
667c667f	27	* The trantor boards are memory mapped. They use an NCR5380 or
1da177e4	28	* equivalent (my sample board had part second sourced from ZILOG).
667c667f	29	* NCR's recommended "Pseudo-DMA" architecture is used, where
1da177e4	30	* a PAL drives the DMA signals on the 5380 allowing fast, blind
667c667f	31	* transfers with proper handshaking.
1da177e4 LT	32	*/
	33
	34	/*
667c667f	35	* Note : a boot switch is provided for the purpose of informing the
1da177e4 LT	36	* firmware to boot or not boot from attached SCSI devices. So, I imagine
	37	* there are fewer people who've yanked the ROM like they do on the Seagate
	38	* to make bootup faster, and I'll probably use this for autodetection.
	39	*/
	40	#define T_ROM_OFFSET 0
	41
	42	/*
	43	* Note : my sample board WAS NOT populated with the SRAM, so this
	44	* can't be used for autodetection without a ROM present.
	45	*/
	46	#define T_RAM_OFFSET 0x1800
	47
	48	/*
	49	* All of the registers are allocated 32 bytes of address space, except
	50	* for the data register (read/write to/from the 5380 in pseudo-DMA mode)
	51	*/
	52	#define T_CONTROL_REG_OFFSET 0x1c00 /* rw */
	53	#define T_CR_INT 0x10 /* Enable interrupts */
	54	#define T_CR_CT 0x02 /* Reset watchdog timer */
	55
	56	#define T_STATUS_REG_OFFSET 0x1c20 /* ro */
	57	#define T_ST_BOOT 0x80 /* Boot switch */
	58	#define T_ST_S3 0x40 /* User settable switches, */
	59	#define T_ST_S2 0x20 /* read 0 when switch is on, 1 off */
	60	#define T_ST_S1 0x10
	61	#define T_ST_PS2 0x08 /* Set for Microchannel 228 */
	62	#define T_ST_RDY 0x04 /* 5380 DRQ */
	63	#define T_ST_TIM 0x02 /* indicates 40us watchdog timer fired */
	64	#define T_ST_ZERO 0x01 /* Always zero */
	65
	66	#define T_5380_OFFSET 0x1d00 /* 8 registers here, see NCR5380.h */
	67
	68	#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
	69
1da177e4 LT	70	#ifndef CMD_PER_LUN
	71	#define CMD_PER_LUN 2
	72	#endif
	73
	74	#ifndef CAN_QUEUE
667c667f	75	#define CAN_QUEUE 32
1da177e4 LT	76	#endif
1da177e4 LT	77
1da177e4 LT	78	#define NCR5380_implementation_fields \
	79	void __iomem *base
	80
	81	#define NCR5380_local_declare() \
	82	void __iomem *base
	83
	84	#define NCR5380_setup(instance) \
	85	base = ((struct NCR5380_hostdata *)(instance->hostdata))->base
	86
	87	#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
	88
1da177e4 LT	89	#define NCR5380_read(reg) readb(T128_address(reg))
1da177e4 LT	90	#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
1da177e4 LT	91
1da177e4 LT	92	#define NCR5380_intr t128_intr
1da177e4 LT	93	#define NCR5380_queue_command t128_queue_command
1da177e4 LT	94	#define NCR5380_abort t128_abort
1da177e4	95	#define NCR5380_bus_reset t128_bus_reset
8c32513b	96	#define NCR5380_info t128_info
dd7ab71b AV	97	#define NCR5380_show_info t128_show_info
dd7ab71b AV	98	#define NCR5380_write_info t128_write_info
1da177e4	99
667c667f	100	/* 15 14 12 10 7 5 3
1da177e4	101	1101 0100 1010 1000 */
667c667f H	102
667c667f H	103	#define T128_IRQS 0xc4a8
1da177e4	104
1da177e4	105	#endif /* T128_H */