Commit | Line | Data |
---|---|---|
1a59d1b8 | 1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
1da177e4 LT |
2 | /* |
3 | * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family | |
4 | * of PCI-SCSI IO processors. | |
5 | * | |
6 | * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> | |
7 | * | |
8 | * This driver is derived from the Linux sym53c8xx driver. | |
9 | * Copyright (C) 1998-2000 Gerard Roudier | |
10 | * | |
11 | * The sym53c8xx driver is derived from the ncr53c8xx driver that had been | |
12 | * a port of the FreeBSD ncr driver to Linux-1.2.13. | |
13 | * | |
14 | * The original ncr driver has been written for 386bsd and FreeBSD by | |
15 | * Wolfgang Stanglmeier <wolf@cologne.de> | |
16 | * Stefan Esser <se@mi.Uni-Koeln.de> | |
17 | * Copyright (C) 1994 Wolfgang Stanglmeier | |
18 | * | |
19 | * Other major contributions: | |
20 | * | |
21 | * NVRAM detection and reading. | |
22 | * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> | |
23 | * | |
24 | *----------------------------------------------------------------------------- | |
1da177e4 LT |
25 | */ |
26 | ||
27 | /* | |
28 | * Scripts for SYMBIOS-Processor | |
29 | * | |
30 | * We have to know the offsets of all labels before we reach | |
31 | * them (for forward jumps). Therefore we declare a struct | |
32 | * here. If you make changes inside the script, | |
33 | * | |
34 | * DONT FORGET TO CHANGE THE LENGTHS HERE! | |
35 | */ | |
36 | ||
37 | /* | |
38 | * Script fragments which are loaded into the on-chip RAM | |
39 | * of 825A, 875, 876, 895, 895A, 896 and 1010 chips. | |
40 | * Must not exceed 4K bytes. | |
41 | */ | |
42 | struct SYM_FWA_SCR { | |
43 | u32 start [ 14]; | |
44 | u32 getjob_begin [ 4]; | |
45 | u32 getjob_end [ 4]; | |
46 | #ifdef SYM_CONF_TARGET_ROLE_SUPPORT | |
47 | u32 select [ 6]; | |
48 | #else | |
49 | u32 select [ 4]; | |
50 | #endif | |
51 | #if SYM_CONF_DMA_ADDRESSING_MODE == 2 | |
52 | u32 is_dmap_dirty [ 4]; | |
53 | #endif | |
54 | u32 wf_sel_done [ 2]; | |
55 | u32 sel_done [ 2]; | |
56 | u32 send_ident [ 2]; | |
57 | #ifdef SYM_CONF_IARB_SUPPORT | |
58 | u32 select2 [ 8]; | |
59 | #else | |
60 | u32 select2 [ 2]; | |
61 | #endif | |
62 | u32 command [ 2]; | |
63 | u32 dispatch [ 28]; | |
64 | u32 sel_no_cmd [ 10]; | |
65 | u32 init [ 6]; | |
66 | u32 clrack [ 4]; | |
67 | u32 datai_done [ 10]; | |
68 | u32 datai_done_wsr [ 20]; | |
69 | u32 datao_done [ 10]; | |
70 | u32 datao_done_wss [ 6]; | |
71 | u32 datai_phase [ 4]; | |
72 | u32 datao_phase [ 6]; | |
73 | u32 msg_in [ 2]; | |
74 | u32 msg_in2 [ 10]; | |
75 | #ifdef SYM_CONF_IARB_SUPPORT | |
76 | u32 status [ 14]; | |
77 | #else | |
78 | u32 status [ 10]; | |
79 | #endif | |
80 | u32 complete [ 6]; | |
81 | u32 complete2 [ 12]; | |
82 | u32 done [ 14]; | |
83 | u32 done_end [ 2]; | |
84 | u32 complete_error [ 4]; | |
85 | u32 save_dp [ 12]; | |
86 | u32 restore_dp [ 8]; | |
87 | u32 disconnect [ 12]; | |
88 | #ifdef SYM_CONF_IARB_SUPPORT | |
89 | u32 idle [ 4]; | |
90 | #else | |
91 | u32 idle [ 2]; | |
92 | #endif | |
93 | #ifdef SYM_CONF_IARB_SUPPORT | |
94 | u32 ungetjob [ 6]; | |
95 | #else | |
96 | u32 ungetjob [ 4]; | |
97 | #endif | |
98 | #ifdef SYM_CONF_TARGET_ROLE_SUPPORT | |
99 | u32 reselect [ 4]; | |
100 | #else | |
101 | u32 reselect [ 2]; | |
102 | #endif | |
103 | u32 reselected [ 22]; | |
104 | u32 resel_scntl4 [ 20]; | |
105 | u32 resel_lun0 [ 6]; | |
106 | #if SYM_CONF_MAX_TASK*4 > 512 | |
107 | u32 resel_tag [ 26]; | |
108 | #elif SYM_CONF_MAX_TASK*4 > 256 | |
109 | u32 resel_tag [ 20]; | |
110 | #else | |
111 | u32 resel_tag [ 16]; | |
112 | #endif | |
113 | u32 resel_dsa [ 2]; | |
114 | u32 resel_dsa1 [ 4]; | |
115 | u32 resel_no_tag [ 6]; | |
116 | u32 data_in [SYM_CONF_MAX_SG * 2]; | |
117 | u32 data_in2 [ 4]; | |
118 | u32 data_out [SYM_CONF_MAX_SG * 2]; | |
119 | u32 data_out2 [ 4]; | |
120 | u32 pm0_data [ 12]; | |
121 | u32 pm0_data_out [ 6]; | |
122 | u32 pm0_data_end [ 6]; | |
123 | u32 pm1_data [ 12]; | |
124 | u32 pm1_data_out [ 6]; | |
125 | u32 pm1_data_end [ 6]; | |
126 | }; | |
127 | ||
128 | /* | |
129 | * Script fragments which stay in main memory for all chips | |
130 | * except for chips that support 8K on-chip RAM. | |
131 | */ | |
132 | struct SYM_FWB_SCR { | |
133 | u32 start64 [ 2]; | |
134 | u32 no_data [ 2]; | |
135 | #ifdef SYM_CONF_TARGET_ROLE_SUPPORT | |
136 | u32 sel_for_abort [ 18]; | |
137 | #else | |
138 | u32 sel_for_abort [ 16]; | |
139 | #endif | |
140 | u32 sel_for_abort_1 [ 2]; | |
141 | u32 msg_in_etc [ 12]; | |
142 | u32 msg_received [ 4]; | |
143 | u32 msg_weird_seen [ 4]; | |
144 | u32 msg_extended [ 20]; | |
145 | u32 msg_bad [ 6]; | |
146 | u32 msg_weird [ 4]; | |
147 | u32 msg_weird1 [ 8]; | |
148 | ||
149 | u32 wdtr_resp [ 6]; | |
150 | u32 send_wdtr [ 4]; | |
151 | u32 sdtr_resp [ 6]; | |
152 | u32 send_sdtr [ 4]; | |
153 | u32 ppr_resp [ 6]; | |
154 | u32 send_ppr [ 4]; | |
155 | u32 nego_bad_phase [ 4]; | |
156 | u32 msg_out [ 4]; | |
157 | u32 msg_out_done [ 4]; | |
158 | u32 data_ovrun [ 2]; | |
159 | u32 data_ovrun1 [ 22]; | |
160 | u32 data_ovrun2 [ 8]; | |
161 | u32 abort_resel [ 16]; | |
162 | u32 resend_ident [ 4]; | |
163 | u32 ident_break [ 4]; | |
164 | u32 ident_break_atn [ 4]; | |
165 | u32 sdata_in [ 6]; | |
166 | u32 resel_bad_lun [ 4]; | |
167 | u32 bad_i_t_l [ 4]; | |
168 | u32 bad_i_t_l_q [ 4]; | |
169 | u32 bad_status [ 6]; | |
170 | u32 pm_handle [ 20]; | |
171 | u32 pm_handle1 [ 4]; | |
172 | u32 pm_save [ 4]; | |
173 | u32 pm0_save [ 12]; | |
174 | u32 pm_save_end [ 4]; | |
175 | u32 pm1_save [ 14]; | |
176 | ||
177 | /* WSR handling */ | |
178 | u32 pm_wsr_handle [ 38]; | |
179 | u32 wsr_ma_helper [ 4]; | |
180 | ||
1da177e4 LT |
181 | /* Data area */ |
182 | u32 zero [ 1]; | |
183 | u32 scratch [ 1]; | |
184 | u32 pm0_data_addr [ 1]; | |
185 | u32 pm1_data_addr [ 1]; | |
186 | u32 done_pos [ 1]; | |
187 | u32 startpos [ 1]; | |
188 | u32 targtbl [ 1]; | |
189 | }; | |
190 | ||
191 | /* | |
192 | * Script fragments used at initialisations. | |
193 | * Only runs out of main memory. | |
194 | */ | |
195 | struct SYM_FWZ_SCR { | |
196 | u32 snooptest [ 6]; | |
197 | u32 snoopend [ 2]; | |
198 | }; | |
199 | ||
200 | static struct SYM_FWA_SCR SYM_FWA_SCR = { | |
201 | /*--------------------------< START >----------------------------*/ { | |
202 | /* | |
203 | * Switch the LED on. | |
204 | * Will be patched with a NO_OP if LED | |
205 | * not needed or not desired. | |
206 | */ | |
207 | SCR_REG_REG (gpreg, SCR_AND, 0xfe), | |
208 | 0, | |
209 | /* | |
210 | * Clear SIGP. | |
211 | */ | |
212 | SCR_FROM_REG (ctest2), | |
213 | 0, | |
214 | /* | |
215 | * Stop here if the C code wants to perform | |
216 | * some error recovery procedure manually. | |
217 | * (Indicate this by setting SEM in ISTAT) | |
218 | */ | |
219 | SCR_FROM_REG (istat), | |
220 | 0, | |
221 | /* | |
222 | * Report to the C code the next position in | |
223 | * the start queue the SCRIPTS will schedule. | |
224 | * The C code must not change SCRATCHA. | |
225 | */ | |
226 | SCR_LOAD_ABS (scratcha, 4), | |
227 | PADDR_B (startpos), | |
228 | SCR_INT ^ IFTRUE (MASK (SEM, SEM)), | |
229 | SIR_SCRIPT_STOPPED, | |
230 | /* | |
231 | * Start the next job. | |
232 | * | |
233 | * @DSA = start point for this job. | |
234 | * SCRATCHA = address of this job in the start queue. | |
235 | * | |
236 | * We will restore startpos with SCRATCHA if we fails the | |
237 | * arbitration or if it is the idle job. | |
238 | * | |
239 | * The below GETJOB_BEGIN to GETJOB_END section of SCRIPTS | |
240 | * is a critical path. If it is partially executed, it then | |
241 | * may happen that the job address is not yet in the DSA | |
242 | * and the next queue position points to the next JOB. | |
243 | */ | |
244 | SCR_LOAD_ABS (dsa, 4), | |
245 | PADDR_B (startpos), | |
246 | SCR_LOAD_REL (temp, 4), | |
247 | 4, | |
248 | }/*-------------------------< GETJOB_BEGIN >---------------------*/,{ | |
249 | SCR_STORE_ABS (temp, 4), | |
250 | PADDR_B (startpos), | |
251 | SCR_LOAD_REL (dsa, 4), | |
252 | 0, | |
253 | }/*-------------------------< GETJOB_END >-----------------------*/,{ | |
254 | SCR_LOAD_REL (temp, 4), | |
255 | 0, | |
256 | SCR_RETURN, | |
257 | 0, | |
258 | }/*-------------------------< SELECT >---------------------------*/,{ | |
259 | /* | |
260 | * DSA contains the address of a scheduled | |
261 | * data structure. | |
262 | * | |
263 | * SCRATCHA contains the address of the start queue | |
264 | * entry which points to the next job. | |
265 | * | |
266 | * Set Initiator mode. | |
267 | * | |
268 | * (Target mode is left as an exercise for the reader) | |
269 | */ | |
270 | #ifdef SYM_CONF_TARGET_ROLE_SUPPORT | |
271 | SCR_CLR (SCR_TRG), | |
272 | 0, | |
273 | #endif | |
274 | /* | |
275 | * And try to select this target. | |
276 | */ | |
277 | SCR_SEL_TBL_ATN ^ offsetof (struct sym_dsb, select), | |
278 | PADDR_A (ungetjob), | |
279 | /* | |
280 | * Now there are 4 possibilities: | |
281 | * | |
282 | * (1) The chip loses arbitration. | |
283 | * This is ok, because it will try again, | |
284 | * when the bus becomes idle. | |
285 | * (But beware of the timeout function!) | |
286 | * | |
287 | * (2) The chip is reselected. | |
288 | * Then the script processor takes the jump | |
289 | * to the RESELECT label. | |
290 | * | |
291 | * (3) The chip wins arbitration. | |
292 | * Then it will execute SCRIPTS instruction until | |
293 | * the next instruction that checks SCSI phase. | |
294 | * Then will stop and wait for selection to be | |
295 | * complete or selection time-out to occur. | |
296 | * | |
297 | * After having won arbitration, the SCRIPTS | |
298 | * processor is able to execute instructions while | |
299 | * the SCSI core is performing SCSI selection. | |
300 | */ | |
301 | /* | |
302 | * Initialize the status registers | |
303 | */ | |
304 | SCR_LOAD_REL (scr0, 4), | |
305 | offsetof (struct sym_ccb, phys.head.status), | |
306 | /* | |
307 | * We may need help from CPU if the DMA segment | |
308 | * registers aren't up-to-date for this IO. | |
309 | * Patched with NOOP for chips that donnot | |
310 | * support DAC addressing. | |
311 | */ | |
312 | #if SYM_CONF_DMA_ADDRESSING_MODE == 2 | |
313 | }/*-------------------------< IS_DMAP_DIRTY >--------------------*/,{ | |
314 | SCR_FROM_REG (HX_REG), | |
315 | 0, | |
316 | SCR_INT ^ IFTRUE (MASK (HX_DMAP_DIRTY, HX_DMAP_DIRTY)), | |
317 | SIR_DMAP_DIRTY, | |
318 | #endif | |
319 | }/*-------------------------< WF_SEL_DONE >----------------------*/,{ | |
320 | SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)), | |
321 | SIR_SEL_ATN_NO_MSG_OUT, | |
322 | }/*-------------------------< SEL_DONE >-------------------------*/,{ | |
323 | /* | |
324 | * C1010-33 errata work-around. | |
325 | * Due to a race, the SCSI core may not have | |
326 | * loaded SCNTL3 on SEL_TBL instruction. | |
327 | * We reload it once phase is stable. | |
328 | * Patched with a NOOP for other chips. | |
329 | */ | |
330 | SCR_LOAD_REL (scntl3, 1), | |
331 | offsetof(struct sym_dsb, select.sel_scntl3), | |
332 | }/*-------------------------< SEND_IDENT >-----------------------*/,{ | |
333 | /* | |
334 | * Selection complete. | |
335 | * Send the IDENTIFY and possibly the TAG message | |
336 | * and negotiation message if present. | |
337 | */ | |
338 | SCR_MOVE_TBL ^ SCR_MSG_OUT, | |
339 | offsetof (struct sym_dsb, smsg), | |
340 | }/*-------------------------< SELECT2 >--------------------------*/,{ | |
341 | #ifdef SYM_CONF_IARB_SUPPORT | |
342 | /* | |
343 | * Set IMMEDIATE ARBITRATION if we have been given | |
344 | * a hint to do so. (Some job to do after this one). | |
345 | */ | |
346 | SCR_FROM_REG (HF_REG), | |
347 | 0, | |
348 | SCR_JUMPR ^ IFFALSE (MASK (HF_HINT_IARB, HF_HINT_IARB)), | |
349 | 8, | |
350 | SCR_REG_REG (scntl1, SCR_OR, IARB), | |
351 | 0, | |
352 | #endif | |
353 | /* | |
354 | * Anticipate the COMMAND phase. | |
355 | * This is the PHASE we expect at this point. | |
356 | */ | |
357 | SCR_JUMP ^ IFFALSE (WHEN (SCR_COMMAND)), | |
358 | PADDR_A (sel_no_cmd), | |
359 | }/*-------------------------< COMMAND >--------------------------*/,{ | |
360 | /* | |
361 | * ... and send the command | |
362 | */ | |
363 | SCR_MOVE_TBL ^ SCR_COMMAND, | |
364 | offsetof (struct sym_dsb, cmd), | |
365 | }/*-------------------------< DISPATCH >-------------------------*/,{ | |
366 | /* | |
367 | * MSG_IN is the only phase that shall be | |
368 | * entered at least once for each (re)selection. | |
369 | * So we test it first. | |
370 | */ | |
371 | SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), | |
372 | PADDR_A (msg_in), | |
373 | SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT)), | |
374 | PADDR_A (datao_phase), | |
375 | SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN)), | |
376 | PADDR_A (datai_phase), | |
377 | SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)), | |
378 | PADDR_A (status), | |
379 | SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)), | |
380 | PADDR_A (command), | |
381 | SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)), | |
382 | PADDR_B (msg_out), | |
383 | /* | |
384 | * Discard as many illegal phases as | |
385 | * required and tell the C code about. | |
386 | */ | |
387 | SCR_JUMPR ^ IFFALSE (WHEN (SCR_ILG_OUT)), | |
388 | 16, | |
389 | SCR_MOVE_ABS (1) ^ SCR_ILG_OUT, | |
390 | HADDR_1 (scratch), | |
391 | SCR_JUMPR ^ IFTRUE (WHEN (SCR_ILG_OUT)), | |
392 | -16, | |
393 | SCR_JUMPR ^ IFFALSE (WHEN (SCR_ILG_IN)), | |
394 | 16, | |
395 | SCR_MOVE_ABS (1) ^ SCR_ILG_IN, | |
396 | HADDR_1 (scratch), | |
397 | SCR_JUMPR ^ IFTRUE (WHEN (SCR_ILG_IN)), | |
398 | -16, | |
399 | SCR_INT, | |
400 | SIR_BAD_PHASE, | |
401 | SCR_JUMP, | |
402 | PADDR_A (dispatch), | |
403 | }/*-------------------------< SEL_NO_CMD >-----------------------*/,{ | |
404 | /* | |
405 | * The target does not switch to command | |
406 | * phase after IDENTIFY has been sent. | |
407 | * | |
408 | * If it stays in MSG OUT phase send it | |
409 | * the IDENTIFY again. | |
410 | */ | |
411 | SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), | |
412 | PADDR_B (resend_ident), | |
413 | /* | |
414 | * If target does not switch to MSG IN phase | |
415 | * and we sent a negotiation, assert the | |
416 | * failure immediately. | |
417 | */ | |
418 | SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), | |
419 | PADDR_A (dispatch), | |
420 | SCR_FROM_REG (HS_REG), | |
421 | 0, | |
422 | SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), | |
423 | SIR_NEGO_FAILED, | |
424 | /* | |
425 | * Jump to dispatcher. | |
426 | */ | |
427 | SCR_JUMP, | |
428 | PADDR_A (dispatch), | |
429 | }/*-------------------------< INIT >-----------------------------*/,{ | |
430 | /* | |
431 | * Wait for the SCSI RESET signal to be | |
432 | * inactive before restarting operations, | |
433 | * since the chip may hang on SEL_ATN | |
434 | * if SCSI RESET is active. | |
435 | */ | |
436 | SCR_FROM_REG (sstat0), | |
437 | 0, | |
438 | SCR_JUMPR ^ IFTRUE (MASK (IRST, IRST)), | |
439 | -16, | |
440 | SCR_JUMP, | |
441 | PADDR_A (start), | |
442 | }/*-------------------------< CLRACK >---------------------------*/,{ | |
443 | /* | |
444 | * Terminate possible pending message phase. | |
445 | */ | |
446 | SCR_CLR (SCR_ACK), | |
447 | 0, | |
448 | SCR_JUMP, | |
449 | PADDR_A (dispatch), | |
450 | }/*-------------------------< DATAI_DONE >-----------------------*/,{ | |
451 | /* | |
452 | * Save current pointer to LASTP. | |
453 | */ | |
454 | SCR_STORE_REL (temp, 4), | |
455 | offsetof (struct sym_ccb, phys.head.lastp), | |
456 | /* | |
457 | * If the SWIDE is not full, jump to dispatcher. | |
458 | * We anticipate a STATUS phase. | |
459 | */ | |
460 | SCR_FROM_REG (scntl2), | |
461 | 0, | |
462 | SCR_JUMP ^ IFTRUE (MASK (WSR, WSR)), | |
463 | PADDR_A (datai_done_wsr), | |
464 | SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)), | |
465 | PADDR_A (status), | |
466 | SCR_JUMP, | |
467 | PADDR_A (dispatch), | |
468 | }/*-------------------------< DATAI_DONE_WSR >-------------------*/,{ | |
469 | /* | |
470 | * The SWIDE is full. | |
471 | * Clear this condition. | |
472 | */ | |
473 | SCR_REG_REG (scntl2, SCR_OR, WSR), | |
474 | 0, | |
475 | /* | |
476 | * We are expecting an IGNORE RESIDUE message | |
477 | * from the device, otherwise we are in data | |
478 | * overrun condition. Check against MSG_IN phase. | |
479 | */ | |
480 | SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), | |
481 | SIR_SWIDE_OVERRUN, | |
482 | SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), | |
483 | PADDR_A (dispatch), | |
484 | /* | |
485 | * We are in MSG_IN phase, | |
486 | * Read the first byte of the message. | |
487 | * If it is not an IGNORE RESIDUE message, | |
488 | * signal overrun and jump to message | |
489 | * processing. | |
490 | */ | |
491 | SCR_MOVE_ABS (1) ^ SCR_MSG_IN, | |
492 | HADDR_1 (msgin[0]), | |
493 | SCR_INT ^ IFFALSE (DATA (M_IGN_RESIDUE)), | |
494 | SIR_SWIDE_OVERRUN, | |
495 | SCR_JUMP ^ IFFALSE (DATA (M_IGN_RESIDUE)), | |
496 | PADDR_A (msg_in2), | |
497 | /* | |
498 | * We got the message we expected. | |
499 | * Read the 2nd byte, and jump to dispatcher. | |
500 | */ | |
501 | SCR_CLR (SCR_ACK), | |
502 | 0, | |
503 | SCR_MOVE_ABS (1) ^ SCR_MSG_IN, | |
504 | HADDR_1 (msgin[1]), | |
505 | SCR_CLR (SCR_ACK), | |
506 | 0, | |
507 | SCR_JUMP, | |
508 | PADDR_A (dispatch), | |
509 | }/*-------------------------< DATAO_DONE >-----------------------*/,{ | |
510 | /* | |
511 | * Save current pointer to LASTP. | |
512 | */ | |
513 | SCR_STORE_REL (temp, 4), | |
514 | offsetof (struct sym_ccb, phys.head.lastp), | |
515 | /* | |
516 | * If the SODL is not full jump to dispatcher. | |
517 | * We anticipate a STATUS phase. | |
518 | */ | |
519 | SCR_FROM_REG (scntl2), | |
520 | 0, | |
521 | SCR_JUMP ^ IFTRUE (MASK (WSS, WSS)), | |
522 | PADDR_A (datao_done_wss), | |
523 | SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)), | |
524 | PADDR_A (status), | |
525 | SCR_JUMP, | |
526 | PADDR_A (dispatch), | |
527 | }/*-------------------------< DATAO_DONE_WSS >-------------------*/,{ | |
528 | /* | |
529 | * The SODL is full, clear this condition. | |
530 | */ | |
531 | SCR_REG_REG (scntl2, SCR_OR, WSS), | |
532 | 0, | |
533 | /* | |
534 | * And signal a DATA UNDERRUN condition | |
535 | * to the C code. | |
536 | */ | |
537 | SCR_INT, | |
538 | SIR_SODL_UNDERRUN, | |
539 | SCR_JUMP, | |
540 | PADDR_A (dispatch), | |
541 | }/*-------------------------< DATAI_PHASE >----------------------*/,{ | |
542 | /* | |
543 | * Jump to current pointer. | |
544 | */ | |
545 | SCR_LOAD_REL (temp, 4), | |
546 | offsetof (struct sym_ccb, phys.head.lastp), | |
547 | SCR_RETURN, | |
548 | 0, | |
549 | }/*-------------------------< DATAO_PHASE >----------------------*/,{ | |
550 | /* | |
551 | * C1010-66 errata work-around. | |
552 | * Extra clocks of data hold must be inserted | |
553 | * in DATA OUT phase on 33 MHz PCI BUS. | |
554 | * Patched with a NOOP for other chips. | |
555 | */ | |
556 | SCR_REG_REG (scntl4, SCR_OR, (XCLKH_DT|XCLKH_ST)), | |
557 | 0, | |
558 | /* | |
559 | * Jump to current pointer. | |
560 | */ | |
561 | SCR_LOAD_REL (temp, 4), | |
562 | offsetof (struct sym_ccb, phys.head.lastp), | |
563 | SCR_RETURN, | |
564 | 0, | |
565 | }/*-------------------------< MSG_IN >---------------------------*/,{ | |
566 | /* | |
567 | * Get the first byte of the message. | |
568 | * | |
569 | * The script processor doesn't negate the | |
570 | * ACK signal after this transfer. | |
571 | */ | |
572 | SCR_MOVE_ABS (1) ^ SCR_MSG_IN, | |
573 | HADDR_1 (msgin[0]), | |
574 | }/*-------------------------< MSG_IN2 >--------------------------*/,{ | |
575 | /* | |
576 | * Check first against 1 byte messages | |
577 | * that we handle from SCRIPTS. | |
578 | */ | |
579 | SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)), | |
580 | PADDR_A (complete), | |
581 | SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)), | |
582 | PADDR_A (disconnect), | |
583 | SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)), | |
584 | PADDR_A (save_dp), | |
585 | SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)), | |
586 | PADDR_A (restore_dp), | |
587 | /* | |
588 | * We handle all other messages from the | |
589 | * C code, so no need to waste on-chip RAM | |
590 | * for those ones. | |
591 | */ | |
592 | SCR_JUMP, | |
593 | PADDR_B (msg_in_etc), | |
594 | }/*-------------------------< STATUS >---------------------------*/,{ | |
595 | /* | |
596 | * get the status | |
597 | */ | |
598 | SCR_MOVE_ABS (1) ^ SCR_STATUS, | |
599 | HADDR_1 (scratch), | |
600 | #ifdef SYM_CONF_IARB_SUPPORT | |
601 | /* | |
602 | * If STATUS is not GOOD, clear IMMEDIATE ARBITRATION, | |
603 | * since we may have to tamper the start queue from | |
604 | * the C code. | |
605 | */ | |
606 | SCR_JUMPR ^ IFTRUE (DATA (S_GOOD)), | |
607 | 8, | |
608 | SCR_REG_REG (scntl1, SCR_AND, ~IARB), | |
609 | 0, | |
610 | #endif | |
611 | /* | |
612 | * save status to scsi_status. | |
613 | * mark as complete. | |
614 | */ | |
615 | SCR_TO_REG (SS_REG), | |
616 | 0, | |
617 | SCR_LOAD_REG (HS_REG, HS_COMPLETE), | |
618 | 0, | |
619 | /* | |
620 | * Anticipate the MESSAGE PHASE for | |
621 | * the TASK COMPLETE message. | |
622 | */ | |
623 | SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), | |
624 | PADDR_A (msg_in), | |
625 | SCR_JUMP, | |
626 | PADDR_A (dispatch), | |
627 | }/*-------------------------< COMPLETE >-------------------------*/,{ | |
628 | /* | |
629 | * Complete message. | |
630 | * | |
631 | * When we terminate the cycle by clearing ACK, | |
632 | * the target may disconnect immediately. | |
633 | * | |
634 | * We don't want to be told of an "unexpected disconnect", | |
635 | * so we disable this feature. | |
636 | */ | |
637 | SCR_REG_REG (scntl2, SCR_AND, 0x7f), | |
638 | 0, | |
639 | /* | |
640 | * Terminate cycle ... | |
641 | */ | |
642 | SCR_CLR (SCR_ACK|SCR_ATN), | |
643 | 0, | |
644 | /* | |
645 | * ... and wait for the disconnect. | |
646 | */ | |
647 | SCR_WAIT_DISC, | |
648 | 0, | |
649 | }/*-------------------------< COMPLETE2 >------------------------*/,{ | |
650 | /* | |
651 | * Save host status. | |
652 | */ | |
653 | SCR_STORE_REL (scr0, 4), | |
654 | offsetof (struct sym_ccb, phys.head.status), | |
655 | /* | |
656 | * Some bridges may reorder DMA writes to memory. | |
657 | * We donnot want the CPU to deal with completions | |
658 | * without all the posted write having been flushed | |
659 | * to memory. This DUMMY READ should flush posted | |
660 | * buffers prior to the CPU having to deal with | |
661 | * completions. | |
662 | */ | |
663 | SCR_LOAD_REL (scr0, 4), /* DUMMY READ */ | |
664 | offsetof (struct sym_ccb, phys.head.status), | |
665 | ||
666 | /* | |
667 | * If command resulted in not GOOD status, | |
668 | * call the C code if needed. | |
669 | */ | |
670 | SCR_FROM_REG (SS_REG), | |
671 | 0, | |
672 | SCR_CALL ^ IFFALSE (DATA (S_GOOD)), | |
673 | PADDR_B (bad_status), | |
674 | /* | |
675 | * If we performed an auto-sense, call | |
676 | * the C code to synchronyze task aborts | |
677 | * with UNIT ATTENTION conditions. | |
678 | */ | |
679 | SCR_FROM_REG (HF_REG), | |
680 | 0, | |
681 | SCR_JUMP ^ IFFALSE (MASK (0 ,(HF_SENSE|HF_EXT_ERR))), | |
682 | PADDR_A (complete_error), | |
683 | }/*-------------------------< DONE >-----------------------------*/,{ | |
684 | /* | |
685 | * Copy the DSA to the DONE QUEUE and | |
686 | * signal completion to the host. | |
687 | * If we are interrupted between DONE | |
688 | * and DONE_END, we must reset, otherwise | |
689 | * the completed CCB may be lost. | |
690 | */ | |
691 | SCR_STORE_ABS (dsa, 4), | |
692 | PADDR_B (scratch), | |
693 | SCR_LOAD_ABS (dsa, 4), | |
694 | PADDR_B (done_pos), | |
695 | SCR_LOAD_ABS (scratcha, 4), | |
696 | PADDR_B (scratch), | |
697 | SCR_STORE_REL (scratcha, 4), | |
698 | 0, | |
699 | /* | |
700 | * The instruction below reads the DONE QUEUE next | |
701 | * free position from memory. | |
702 | * In addition it ensures that all PCI posted writes | |
703 | * are flushed and so the DSA value of the done | |
704 | * CCB is visible by the CPU before INTFLY is raised. | |
705 | */ | |
706 | SCR_LOAD_REL (scratcha, 4), | |
707 | 4, | |
708 | SCR_INT_FLY, | |
709 | 0, | |
710 | SCR_STORE_ABS (scratcha, 4), | |
711 | PADDR_B (done_pos), | |
712 | }/*-------------------------< DONE_END >-------------------------*/,{ | |
713 | SCR_JUMP, | |
714 | PADDR_A (start), | |
715 | }/*-------------------------< COMPLETE_ERROR >-------------------*/,{ | |
716 | SCR_LOAD_ABS (scratcha, 4), | |
717 | PADDR_B (startpos), | |
718 | SCR_INT, | |
719 | SIR_COMPLETE_ERROR, | |
720 | }/*-------------------------< SAVE_DP >--------------------------*/,{ | |
721 | /* | |
722 | * Clear ACK immediately. | |
723 | * No need to delay it. | |
724 | */ | |
725 | SCR_CLR (SCR_ACK), | |
726 | 0, | |
727 | /* | |
728 | * Keep track we received a SAVE DP, so | |
729 | * we will switch to the other PM context | |
730 | * on the next PM since the DP may point | |
731 | * to the current PM context. | |
732 | */ | |
733 | SCR_REG_REG (HF_REG, SCR_OR, HF_DP_SAVED), | |
734 | 0, | |
735 | /* | |
736 | * SAVE_DP message: | |
737 | * Copy LASTP to SAVEP. | |
738 | */ | |
739 | SCR_LOAD_REL (scratcha, 4), | |
740 | offsetof (struct sym_ccb, phys.head.lastp), | |
741 | SCR_STORE_REL (scratcha, 4), | |
742 | offsetof (struct sym_ccb, phys.head.savep), | |
743 | /* | |
744 | * Anticipate the MESSAGE PHASE for | |
745 | * the DISCONNECT message. | |
746 | */ | |
747 | SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), | |
748 | PADDR_A (msg_in), | |
749 | SCR_JUMP, | |
750 | PADDR_A (dispatch), | |
751 | }/*-------------------------< RESTORE_DP >-----------------------*/,{ | |
752 | /* | |
753 | * Clear ACK immediately. | |
754 | * No need to delay it. | |
755 | */ | |
756 | SCR_CLR (SCR_ACK), | |
757 | 0, | |
758 | /* | |
759 | * Copy SAVEP to LASTP. | |
760 | */ | |
761 | SCR_LOAD_REL (scratcha, 4), | |
762 | offsetof (struct sym_ccb, phys.head.savep), | |
763 | SCR_STORE_REL (scratcha, 4), | |
764 | offsetof (struct sym_ccb, phys.head.lastp), | |
765 | SCR_JUMP, | |
766 | PADDR_A (dispatch), | |
767 | }/*-------------------------< DISCONNECT >-----------------------*/,{ | |
768 | /* | |
769 | * DISCONNECTing ... | |
770 | * | |
771 | * disable the "unexpected disconnect" feature, | |
772 | * and remove the ACK signal. | |
773 | */ | |
774 | SCR_REG_REG (scntl2, SCR_AND, 0x7f), | |
775 | 0, | |
776 | SCR_CLR (SCR_ACK|SCR_ATN), | |
777 | 0, | |
778 | /* | |
779 | * Wait for the disconnect. | |
780 | */ | |
781 | SCR_WAIT_DISC, | |
782 | 0, | |
783 | /* | |
784 | * Status is: DISCONNECTED. | |
785 | */ | |
786 | SCR_LOAD_REG (HS_REG, HS_DISCONNECT), | |
787 | 0, | |
788 | /* | |
789 | * Save host status. | |
790 | */ | |
791 | SCR_STORE_REL (scr0, 4), | |
792 | offsetof (struct sym_ccb, phys.head.status), | |
793 | SCR_JUMP, | |
794 | PADDR_A (start), | |
795 | }/*-------------------------< IDLE >-----------------------------*/,{ | |
796 | /* | |
797 | * Nothing to do? | |
798 | * Switch the LED off and wait for reselect. | |
799 | * Will be patched with a NO_OP if LED | |
800 | * not needed or not desired. | |
801 | */ | |
802 | SCR_REG_REG (gpreg, SCR_OR, 0x01), | |
803 | 0, | |
804 | #ifdef SYM_CONF_IARB_SUPPORT | |
805 | SCR_JUMPR, | |
806 | 8, | |
807 | #endif | |
808 | }/*-------------------------< UNGETJOB >-------------------------*/,{ | |
809 | #ifdef SYM_CONF_IARB_SUPPORT | |
810 | /* | |
811 | * Set IMMEDIATE ARBITRATION, for the next time. | |
812 | * This will give us better chance to win arbitration | |
813 | * for the job we just wanted to do. | |
814 | */ | |
815 | SCR_REG_REG (scntl1, SCR_OR, IARB), | |
816 | 0, | |
817 | #endif | |
818 | /* | |
819 | * We are not able to restart the SCRIPTS if we are | |
820 | * interrupted and these instruction haven't been | |
821 | * all executed. BTW, this is very unlikely to | |
822 | * happen, but we check that from the C code. | |
823 | */ | |
824 | SCR_LOAD_REG (dsa, 0xff), | |
825 | 0, | |
826 | SCR_STORE_ABS (scratcha, 4), | |
827 | PADDR_B (startpos), | |
828 | }/*-------------------------< RESELECT >-------------------------*/,{ | |
829 | #ifdef SYM_CONF_TARGET_ROLE_SUPPORT | |
830 | /* | |
831 | * Make sure we are in initiator mode. | |
832 | */ | |
833 | SCR_CLR (SCR_TRG), | |
834 | 0, | |
835 | #endif | |
836 | /* | |
837 | * Sleep waiting for a reselection. | |
838 | */ | |
839 | SCR_WAIT_RESEL, | |
840 | PADDR_A(start), | |
841 | }/*-------------------------< RESELECTED >-----------------------*/,{ | |
842 | /* | |
843 | * Switch the LED on. | |
844 | * Will be patched with a NO_OP if LED | |
845 | * not needed or not desired. | |
846 | */ | |
847 | SCR_REG_REG (gpreg, SCR_AND, 0xfe), | |
848 | 0, | |
849 | /* | |
850 | * load the target id into the sdid | |
851 | */ | |
852 | SCR_REG_SFBR (ssid, SCR_AND, 0x8F), | |
853 | 0, | |
854 | SCR_TO_REG (sdid), | |
855 | 0, | |
856 | /* | |
857 | * Load the target control block address | |
858 | */ | |
859 | SCR_LOAD_ABS (dsa, 4), | |
860 | PADDR_B (targtbl), | |
861 | SCR_SFBR_REG (dsa, SCR_SHL, 0), | |
862 | 0, | |
863 | SCR_REG_REG (dsa, SCR_SHL, 0), | |
864 | 0, | |
865 | SCR_REG_REG (dsa, SCR_AND, 0x3c), | |
866 | 0, | |
867 | SCR_LOAD_REL (dsa, 4), | |
868 | 0, | |
869 | /* | |
870 | * We expect MESSAGE IN phase. | |
871 | * If not, get help from the C code. | |
872 | */ | |
873 | SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), | |
874 | SIR_RESEL_NO_MSG_IN, | |
875 | /* | |
876 | * Load the legacy synchronous transfer registers. | |
877 | */ | |
878 | SCR_LOAD_REL (scntl3, 1), | |
879 | offsetof(struct sym_tcb, head.wval), | |
880 | SCR_LOAD_REL (sxfer, 1), | |
881 | offsetof(struct sym_tcb, head.sval), | |
882 | }/*-------------------------< RESEL_SCNTL4 >---------------------*/,{ | |
883 | /* | |
884 | * The C1010 uses a new synchronous timing scheme. | |
885 | * Will be patched with a NO_OP if not a C1010. | |
886 | */ | |
887 | SCR_LOAD_REL (scntl4, 1), | |
888 | offsetof(struct sym_tcb, head.uval), | |
889 | /* | |
890 | * Get the IDENTIFY message. | |
891 | */ | |
892 | SCR_MOVE_ABS (1) ^ SCR_MSG_IN, | |
893 | HADDR_1 (msgin), | |
894 | /* | |
895 | * If IDENTIFY LUN #0, use a faster path | |
896 | * to find the LCB structure. | |
897 | */ | |
898 | SCR_JUMP ^ IFTRUE (MASK (0x80, 0xbf)), | |
899 | PADDR_A (resel_lun0), | |
900 | /* | |
901 | * If message isn't an IDENTIFY, | |
902 | * tell the C code about. | |
903 | */ | |
904 | SCR_INT ^ IFFALSE (MASK (0x80, 0x80)), | |
905 | SIR_RESEL_NO_IDENTIFY, | |
906 | /* | |
907 | * It is an IDENTIFY message, | |
908 | * Load the LUN control block address. | |
909 | */ | |
910 | SCR_LOAD_REL (dsa, 4), | |
911 | offsetof(struct sym_tcb, head.luntbl_sa), | |
912 | SCR_SFBR_REG (dsa, SCR_SHL, 0), | |
913 | 0, | |
914 | SCR_REG_REG (dsa, SCR_SHL, 0), | |
915 | 0, | |
916 | SCR_REG_REG (dsa, SCR_AND, 0xfc), | |
917 | 0, | |
918 | SCR_LOAD_REL (dsa, 4), | |
919 | 0, | |
920 | SCR_JUMPR, | |
921 | 8, | |
922 | }/*-------------------------< RESEL_LUN0 >-----------------------*/,{ | |
923 | /* | |
924 | * LUN 0 special case (but usual one :)) | |
925 | */ | |
926 | SCR_LOAD_REL (dsa, 4), | |
927 | offsetof(struct sym_tcb, head.lun0_sa), | |
928 | /* | |
929 | * Jump indirectly to the reselect action for this LUN. | |
930 | */ | |
931 | SCR_LOAD_REL (temp, 4), | |
932 | offsetof(struct sym_lcb, head.resel_sa), | |
933 | SCR_RETURN, | |
934 | 0, | |
935 | /* In normal situations, we jump to RESEL_TAG or RESEL_NO_TAG */ | |
936 | }/*-------------------------< RESEL_TAG >------------------------*/,{ | |
937 | /* | |
938 | * ACK the IDENTIFY previously received. | |
939 | */ | |
940 | SCR_CLR (SCR_ACK), | |
941 | 0, | |
942 | /* | |
943 | * It shall be a tagged command. | |
944 | * Read SIMPLE+TAG. | |
945 | * The C code will deal with errors. | |
bbf2f9fb | 946 | * Aggressive optimization, isn't it? :) |
1da177e4 LT |
947 | */ |
948 | SCR_MOVE_ABS (2) ^ SCR_MSG_IN, | |
949 | HADDR_1 (msgin), | |
950 | /* | |
951 | * Load the pointer to the tagged task | |
952 | * table for this LUN. | |
953 | */ | |
954 | SCR_LOAD_REL (dsa, 4), | |
955 | offsetof(struct sym_lcb, head.itlq_tbl_sa), | |
956 | /* | |
957 | * The SIDL still contains the TAG value. | |
bbf2f9fb | 958 | * Aggressive optimization, isn't it? :):) |
1da177e4 LT |
959 | */ |
960 | SCR_REG_SFBR (sidl, SCR_SHL, 0), | |
961 | 0, | |
962 | #if SYM_CONF_MAX_TASK*4 > 512 | |
963 | SCR_JUMPR ^ IFFALSE (CARRYSET), | |
964 | 8, | |
965 | SCR_REG_REG (dsa1, SCR_OR, 2), | |
966 | 0, | |
967 | SCR_REG_REG (sfbr, SCR_SHL, 0), | |
968 | 0, | |
969 | SCR_JUMPR ^ IFFALSE (CARRYSET), | |
970 | 8, | |
971 | SCR_REG_REG (dsa1, SCR_OR, 1), | |
972 | 0, | |
973 | #elif SYM_CONF_MAX_TASK*4 > 256 | |
974 | SCR_JUMPR ^ IFFALSE (CARRYSET), | |
975 | 8, | |
976 | SCR_REG_REG (dsa1, SCR_OR, 1), | |
977 | 0, | |
978 | #endif | |
979 | /* | |
980 | * Retrieve the DSA of this task. | |
981 | * JUMP indirectly to the restart point of the CCB. | |
982 | */ | |
983 | SCR_SFBR_REG (dsa, SCR_AND, 0xfc), | |
984 | 0, | |
985 | SCR_LOAD_REL (dsa, 4), | |
986 | 0, | |
987 | SCR_LOAD_REL (temp, 4), | |
988 | offsetof(struct sym_ccb, phys.head.go.restart), | |
989 | SCR_RETURN, | |
990 | 0, | |
991 | /* In normal situations we branch to RESEL_DSA */ | |
992 | }/*-------------------------< RESEL_DSA >------------------------*/,{ | |
993 | /* | |
994 | * ACK the IDENTIFY or TAG previously received. | |
995 | */ | |
996 | SCR_CLR (SCR_ACK), | |
997 | 0, | |
998 | }/*-------------------------< RESEL_DSA1 >-----------------------*/,{ | |
999 | /* | |
1000 | * Initialize the status registers | |
1001 | */ | |
1002 | SCR_LOAD_REL (scr0, 4), | |
1003 | offsetof (struct sym_ccb, phys.head.status), | |
1004 | /* | |
1005 | * Jump to dispatcher. | |
1006 | */ | |
1007 | SCR_JUMP, | |
1008 | PADDR_A (dispatch), | |
1009 | }/*-------------------------< RESEL_NO_TAG >---------------------*/,{ | |
1010 | /* | |
1011 | * Load the DSA with the unique ITL task. | |
1012 | */ | |
1013 | SCR_LOAD_REL (dsa, 4), | |
1014 | offsetof(struct sym_lcb, head.itl_task_sa), | |
1015 | /* | |
1016 | * JUMP indirectly to the restart point of the CCB. | |
1017 | */ | |
1018 | SCR_LOAD_REL (temp, 4), | |
1019 | offsetof(struct sym_ccb, phys.head.go.restart), | |
1020 | SCR_RETURN, | |
1021 | 0, | |
1022 | /* In normal situations we branch to RESEL_DSA */ | |
1023 | }/*-------------------------< DATA_IN >--------------------------*/,{ | |
1024 | /* | |
1025 | * Because the size depends on the | |
1026 | * #define SYM_CONF_MAX_SG parameter, | |
1027 | * it is filled in at runtime. | |
1028 | * | |
1029 | * ##===========< i=0; i<SYM_CONF_MAX_SG >========= | |
1030 | * || SCR_CHMOV_TBL ^ SCR_DATA_IN, | |
1031 | * || offsetof (struct sym_dsb, data[ i]), | |
1032 | * ##========================================== | |
1033 | */ | |
1034 | 0 | |
1035 | }/*-------------------------< DATA_IN2 >-------------------------*/,{ | |
1036 | SCR_CALL, | |
1037 | PADDR_A (datai_done), | |
1038 | SCR_JUMP, | |
1039 | PADDR_B (data_ovrun), | |
1040 | }/*-------------------------< DATA_OUT >-------------------------*/,{ | |
1041 | /* | |
1042 | * Because the size depends on the | |
1043 | * #define SYM_CONF_MAX_SG parameter, | |
1044 | * it is filled in at runtime. | |
1045 | * | |
1046 | * ##===========< i=0; i<SYM_CONF_MAX_SG >========= | |
1047 | * || SCR_CHMOV_TBL ^ SCR_DATA_OUT, | |
1048 | * || offsetof (struct sym_dsb, data[ i]), | |
1049 | * ##========================================== | |
1050 | */ | |
1051 | 0 | |
1052 | }/*-------------------------< DATA_OUT2 >------------------------*/,{ | |
1053 | SCR_CALL, | |
1054 | PADDR_A (datao_done), | |
1055 | SCR_JUMP, | |
1056 | PADDR_B (data_ovrun), | |
1057 | }/*-------------------------< PM0_DATA >-------------------------*/,{ | |
1058 | /* | |
1059 | * Read our host flags to SFBR, so we will be able | |
1060 | * to check against the data direction we expect. | |
1061 | */ | |
1062 | SCR_FROM_REG (HF_REG), | |
1063 | 0, | |
1064 | /* | |
1065 | * Check against actual DATA PHASE. | |
1066 | */ | |
1067 | SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), | |
1068 | PADDR_A (pm0_data_out), | |
1069 | /* | |
1070 | * Actual phase is DATA IN. | |
1071 | * Check against expected direction. | |
1072 | */ | |
1073 | SCR_JUMP ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN)), | |
1074 | PADDR_B (data_ovrun), | |
1075 | /* | |
1076 | * Keep track we are moving data from the | |
1077 | * PM0 DATA mini-script. | |
1078 | */ | |
1079 | SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0), | |
1080 | 0, | |
1081 | /* | |
1082 | * Move the data to memory. | |
1083 | */ | |
1084 | SCR_CHMOV_TBL ^ SCR_DATA_IN, | |
1085 | offsetof (struct sym_ccb, phys.pm0.sg), | |
1086 | SCR_JUMP, | |
1087 | PADDR_A (pm0_data_end), | |
1088 | }/*-------------------------< PM0_DATA_OUT >---------------------*/,{ | |
1089 | /* | |
1090 | * Actual phase is DATA OUT. | |
1091 | * Check against expected direction. | |
1092 | */ | |
1093 | SCR_JUMP ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN)), | |
1094 | PADDR_B (data_ovrun), | |
1095 | /* | |
1096 | * Keep track we are moving data from the | |
1097 | * PM0 DATA mini-script. | |
1098 | */ | |
1099 | SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0), | |
1100 | 0, | |
1101 | /* | |
1102 | * Move the data from memory. | |
1103 | */ | |
1104 | SCR_CHMOV_TBL ^ SCR_DATA_OUT, | |
1105 | offsetof (struct sym_ccb, phys.pm0.sg), | |
1106 | }/*-------------------------< PM0_DATA_END >---------------------*/,{ | |
1107 | /* | |
1108 | * Clear the flag that told we were moving | |
1109 | * data from the PM0 DATA mini-script. | |
1110 | */ | |
1111 | SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM0)), | |
1112 | 0, | |
1113 | /* | |
1114 | * Return to the previous DATA script which | |
1115 | * is guaranteed by design (if no bug) to be | |
1116 | * the main DATA script for this transfer. | |
1117 | */ | |
1118 | SCR_LOAD_REL (temp, 4), | |
1119 | offsetof (struct sym_ccb, phys.pm0.ret), | |
1120 | SCR_RETURN, | |
1121 | 0, | |
1122 | }/*-------------------------< PM1_DATA >-------------------------*/,{ | |
1123 | /* | |
1124 | * Read our host flags to SFBR, so we will be able | |
1125 | * to check against the data direction we expect. | |
1126 | */ | |
1127 | SCR_FROM_REG (HF_REG), | |
1128 | 0, | |
1129 | /* | |
1130 | * Check against actual DATA PHASE. | |
1131 | */ | |
1132 | SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), | |
1133 | PADDR_A (pm1_data_out), | |
1134 | /* | |
1135 | * Actual phase is DATA IN. | |
1136 | * Check against expected direction. | |
1137 | */ | |
1138 | SCR_JUMP ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN)), | |
1139 | PADDR_B (data_ovrun), | |
1140 | /* | |
1141 | * Keep track we are moving data from the | |
1142 | * PM1 DATA mini-script. | |
1143 | */ | |
1144 | SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1), | |
1145 | 0, | |
1146 | /* | |
1147 | * Move the data to memory. | |
1148 | */ | |
1149 | SCR_CHMOV_TBL ^ SCR_DATA_IN, | |
1150 | offsetof (struct sym_ccb, phys.pm1.sg), | |
1151 | SCR_JUMP, | |
1152 | PADDR_A (pm1_data_end), | |
1153 | }/*-------------------------< PM1_DATA_OUT >---------------------*/,{ | |
1154 | /* | |
1155 | * Actual phase is DATA OUT. | |
1156 | * Check against expected direction. | |
1157 | */ | |
1158 | SCR_JUMP ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN)), | |
1159 | PADDR_B (data_ovrun), | |
1160 | /* | |
1161 | * Keep track we are moving data from the | |
1162 | * PM1 DATA mini-script. | |
1163 | */ | |
1164 | SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1), | |
1165 | 0, | |
1166 | /* | |
1167 | * Move the data from memory. | |
1168 | */ | |
1169 | SCR_CHMOV_TBL ^ SCR_DATA_OUT, | |
1170 | offsetof (struct sym_ccb, phys.pm1.sg), | |
1171 | }/*-------------------------< PM1_DATA_END >---------------------*/,{ | |
1172 | /* | |
1173 | * Clear the flag that told we were moving | |
1174 | * data from the PM1 DATA mini-script. | |
1175 | */ | |
1176 | SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM1)), | |
1177 | 0, | |
1178 | /* | |
1179 | * Return to the previous DATA script which | |
1180 | * is guaranteed by design (if no bug) to be | |
1181 | * the main DATA script for this transfer. | |
1182 | */ | |
1183 | SCR_LOAD_REL (temp, 4), | |
1184 | offsetof (struct sym_ccb, phys.pm1.ret), | |
1185 | SCR_RETURN, | |
1186 | 0, | |
1187 | }/*-------------------------<>-----------------------------------*/ | |
1188 | }; | |
1189 | ||
1190 | static struct SYM_FWB_SCR SYM_FWB_SCR = { | |
1191 | /*--------------------------< START64 >--------------------------*/ { | |
1192 | /* | |
1193 | * SCRIPT entry point for the 895A, 896 and 1010. | |
1194 | * For now, there is no specific stuff for those | |
1195 | * chips at this point, but this may come. | |
1196 | */ | |
1197 | SCR_JUMP, | |
1198 | PADDR_A (init), | |
1199 | }/*-------------------------< NO_DATA >--------------------------*/,{ | |
1200 | SCR_JUMP, | |
1201 | PADDR_B (data_ovrun), | |
1202 | }/*-------------------------< SEL_FOR_ABORT >--------------------*/,{ | |
1203 | /* | |
1204 | * We are jumped here by the C code, if we have | |
1205 | * some target to reset or some disconnected | |
1206 | * job to abort. Since error recovery is a serious | |
1207 | * busyness, we will really reset the SCSI BUS, if | |
1208 | * case of a SCSI interrupt occurring in this path. | |
1209 | */ | |
1210 | #ifdef SYM_CONF_TARGET_ROLE_SUPPORT | |
1211 | /* | |
1212 | * Set initiator mode. | |
1213 | */ | |
1214 | SCR_CLR (SCR_TRG), | |
1215 | 0, | |
1216 | #endif | |
1217 | /* | |
1218 | * And try to select this target. | |
1219 | */ | |
1220 | SCR_SEL_TBL_ATN ^ offsetof (struct sym_hcb, abrt_sel), | |
1221 | PADDR_A (reselect), | |
1222 | /* | |
1223 | * Wait for the selection to complete or | |
1224 | * the selection to time out. | |
1225 | */ | |
1226 | SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_OUT)), | |
1227 | -8, | |
1228 | /* | |
1229 | * Call the C code. | |
1230 | */ | |
1231 | SCR_INT, | |
1232 | SIR_TARGET_SELECTED, | |
1233 | /* | |
1234 | * The C code should let us continue here. | |
1235 | * Send the 'kiss of death' message. | |
1236 | * We expect an immediate disconnect once | |
1237 | * the target has eaten the message. | |
1238 | */ | |
1239 | SCR_REG_REG (scntl2, SCR_AND, 0x7f), | |
1240 | 0, | |
1241 | SCR_MOVE_TBL ^ SCR_MSG_OUT, | |
1242 | offsetof (struct sym_hcb, abrt_tbl), | |
1243 | SCR_CLR (SCR_ACK|SCR_ATN), | |
1244 | 0, | |
1245 | SCR_WAIT_DISC, | |
1246 | 0, | |
1247 | /* | |
1248 | * Tell the C code that we are done. | |
1249 | */ | |
1250 | SCR_INT, | |
1251 | SIR_ABORT_SENT, | |
1252 | }/*-------------------------< SEL_FOR_ABORT_1 >------------------*/,{ | |
1253 | /* | |
1254 | * Jump at scheduler. | |
1255 | */ | |
1256 | SCR_JUMP, | |
1257 | PADDR_A (start), | |
1258 | }/*-------------------------< MSG_IN_ETC >-----------------------*/,{ | |
1259 | /* | |
1260 | * If it is an EXTENDED (variable size message) | |
1261 | * Handle it. | |
1262 | */ | |
1263 | SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)), | |
1264 | PADDR_B (msg_extended), | |
1265 | /* | |
1266 | * Let the C code handle any other | |
1267 | * 1 byte message. | |
1268 | */ | |
1269 | SCR_JUMP ^ IFTRUE (MASK (0x00, 0xf0)), | |
1270 | PADDR_B (msg_received), | |
1271 | SCR_JUMP ^ IFTRUE (MASK (0x10, 0xf0)), | |
1272 | PADDR_B (msg_received), | |
1273 | /* | |
1274 | * We donnot handle 2 bytes messages from SCRIPTS. | |
1275 | * So, let the C code deal with these ones too. | |
1276 | */ | |
1277 | SCR_JUMP ^ IFFALSE (MASK (0x20, 0xf0)), | |
1278 | PADDR_B (msg_weird_seen), | |
1279 | SCR_CLR (SCR_ACK), | |
1280 | 0, | |
1281 | SCR_MOVE_ABS (1) ^ SCR_MSG_IN, | |
1282 | HADDR_1 (msgin[1]), | |
1283 | }/*-------------------------< MSG_RECEIVED >---------------------*/,{ | |
1284 | SCR_LOAD_REL (scratcha, 4), /* DUMMY READ */ | |
1285 | 0, | |
1286 | SCR_INT, | |
1287 | SIR_MSG_RECEIVED, | |
1288 | }/*-------------------------< MSG_WEIRD_SEEN >-------------------*/,{ | |
1289 | SCR_LOAD_REL (scratcha, 4), /* DUMMY READ */ | |
1290 | 0, | |
1291 | SCR_INT, | |
1292 | SIR_MSG_WEIRD, | |
1293 | }/*-------------------------< MSG_EXTENDED >---------------------*/,{ | |
1294 | /* | |
1295 | * Clear ACK and get the next byte | |
1296 | * assumed to be the message length. | |
1297 | */ | |
1298 | SCR_CLR (SCR_ACK), | |
1299 | 0, | |
1300 | SCR_MOVE_ABS (1) ^ SCR_MSG_IN, | |
1301 | HADDR_1 (msgin[1]), | |
1302 | /* | |
1303 | * Try to catch some unlikely situations as 0 length | |
1304 | * or too large the length. | |
1305 | */ | |
1306 | SCR_JUMP ^ IFTRUE (DATA (0)), | |
1307 | PADDR_B (msg_weird_seen), | |
1308 | SCR_TO_REG (scratcha), | |
1309 | 0, | |
1310 | SCR_REG_REG (sfbr, SCR_ADD, (256-8)), | |
1311 | 0, | |
1312 | SCR_JUMP ^ IFTRUE (CARRYSET), | |
1313 | PADDR_B (msg_weird_seen), | |
1314 | /* | |
1315 | * We donnot handle extended messages from SCRIPTS. | |
25985edc | 1316 | * Read the amount of data corresponding to the |
1da177e4 LT |
1317 | * message length and call the C code. |
1318 | */ | |
1319 | SCR_STORE_REL (scratcha, 1), | |
1320 | offsetof (struct sym_dsb, smsg_ext.size), | |
1321 | SCR_CLR (SCR_ACK), | |
1322 | 0, | |
1323 | SCR_MOVE_TBL ^ SCR_MSG_IN, | |
1324 | offsetof (struct sym_dsb, smsg_ext), | |
1325 | SCR_JUMP, | |
1326 | PADDR_B (msg_received), | |
1327 | }/*-------------------------< MSG_BAD >--------------------------*/,{ | |
1328 | /* | |
1329 | * unimplemented message - reject it. | |
1330 | */ | |
1331 | SCR_INT, | |
1332 | SIR_REJECT_TO_SEND, | |
1333 | SCR_SET (SCR_ATN), | |
1334 | 0, | |
1335 | SCR_JUMP, | |
1336 | PADDR_A (clrack), | |
1337 | }/*-------------------------< MSG_WEIRD >------------------------*/,{ | |
1338 | /* | |
1339 | * weird message received | |
1340 | * ignore all MSG IN phases and reject it. | |
1341 | */ | |
1342 | SCR_INT, | |
1343 | SIR_REJECT_TO_SEND, | |
1344 | SCR_SET (SCR_ATN), | |
1345 | 0, | |
1346 | }/*-------------------------< MSG_WEIRD1 >-----------------------*/,{ | |
1347 | SCR_CLR (SCR_ACK), | |
1348 | 0, | |
1349 | SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), | |
1350 | PADDR_A (dispatch), | |
1351 | SCR_MOVE_ABS (1) ^ SCR_MSG_IN, | |
1352 | HADDR_1 (scratch), | |
1353 | SCR_JUMP, | |
1354 | PADDR_B (msg_weird1), | |
1355 | }/*-------------------------< WDTR_RESP >------------------------*/,{ | |
1356 | /* | |
1357 | * let the target fetch our answer. | |
1358 | */ | |
1359 | SCR_SET (SCR_ATN), | |
1360 | 0, | |
1361 | SCR_CLR (SCR_ACK), | |
1362 | 0, | |
1363 | SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), | |
1364 | PADDR_B (nego_bad_phase), | |
1365 | }/*-------------------------< SEND_WDTR >------------------------*/,{ | |
1366 | /* | |
1367 | * Send the M_X_WIDE_REQ | |
1368 | */ | |
1369 | SCR_MOVE_ABS (4) ^ SCR_MSG_OUT, | |
1370 | HADDR_1 (msgout), | |
1371 | SCR_JUMP, | |
1372 | PADDR_B (msg_out_done), | |
1373 | }/*-------------------------< SDTR_RESP >------------------------*/,{ | |
1374 | /* | |
1375 | * let the target fetch our answer. | |
1376 | */ | |
1377 | SCR_SET (SCR_ATN), | |
1378 | 0, | |
1379 | SCR_CLR (SCR_ACK), | |
1380 | 0, | |
1381 | SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), | |
1382 | PADDR_B (nego_bad_phase), | |
1383 | }/*-------------------------< SEND_SDTR >------------------------*/,{ | |
1384 | /* | |
1385 | * Send the M_X_SYNC_REQ | |
1386 | */ | |
1387 | SCR_MOVE_ABS (5) ^ SCR_MSG_OUT, | |
1388 | HADDR_1 (msgout), | |
1389 | SCR_JUMP, | |
1390 | PADDR_B (msg_out_done), | |
1391 | }/*-------------------------< PPR_RESP >-------------------------*/,{ | |
1392 | /* | |
1393 | * let the target fetch our answer. | |
1394 | */ | |
1395 | SCR_SET (SCR_ATN), | |
1396 | 0, | |
1397 | SCR_CLR (SCR_ACK), | |
1398 | 0, | |
1399 | SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), | |
1400 | PADDR_B (nego_bad_phase), | |
1401 | }/*-------------------------< SEND_PPR >-------------------------*/,{ | |
1402 | /* | |
1403 | * Send the M_X_PPR_REQ | |
1404 | */ | |
1405 | SCR_MOVE_ABS (8) ^ SCR_MSG_OUT, | |
1406 | HADDR_1 (msgout), | |
1407 | SCR_JUMP, | |
1408 | PADDR_B (msg_out_done), | |
1409 | }/*-------------------------< NEGO_BAD_PHASE >-------------------*/,{ | |
1410 | SCR_INT, | |
1411 | SIR_NEGO_PROTO, | |
1412 | SCR_JUMP, | |
1413 | PADDR_A (dispatch), | |
1414 | }/*-------------------------< MSG_OUT >--------------------------*/,{ | |
1415 | /* | |
1416 | * The target requests a message. | |
1417 | * We donnot send messages that may | |
1418 | * require the device to go to bus free. | |
1419 | */ | |
1420 | SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, | |
1421 | HADDR_1 (msgout), | |
1422 | /* | |
1423 | * ... wait for the next phase | |
1424 | * if it's a message out, send it again, ... | |
1425 | */ | |
1426 | SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), | |
1427 | PADDR_B (msg_out), | |
1428 | }/*-------------------------< MSG_OUT_DONE >---------------------*/,{ | |
1429 | /* | |
1430 | * Let the C code be aware of the | |
1431 | * sent message and clear the message. | |
1432 | */ | |
1433 | SCR_INT, | |
1434 | SIR_MSG_OUT_DONE, | |
1435 | /* | |
1436 | * ... and process the next phase | |
1437 | */ | |
1438 | SCR_JUMP, | |
1439 | PADDR_A (dispatch), | |
1440 | }/*-------------------------< DATA_OVRUN >-----------------------*/,{ | |
1441 | /* | |
1442 | * Use scratcha to count the extra bytes. | |
1443 | */ | |
1444 | SCR_LOAD_ABS (scratcha, 4), | |
1445 | PADDR_B (zero), | |
1446 | }/*-------------------------< DATA_OVRUN1 >----------------------*/,{ | |
1447 | /* | |
1448 | * The target may want to transfer too much data. | |
1449 | * | |
1450 | * If phase is DATA OUT write 1 byte and count it. | |
1451 | */ | |
1452 | SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)), | |
1453 | 16, | |
1454 | SCR_CHMOV_ABS (1) ^ SCR_DATA_OUT, | |
1455 | HADDR_1 (scratch), | |
1456 | SCR_JUMP, | |
1457 | PADDR_B (data_ovrun2), | |
1458 | /* | |
1459 | * If WSR is set, clear this condition, and | |
1460 | * count this byte. | |
1461 | */ | |
1462 | SCR_FROM_REG (scntl2), | |
1463 | 0, | |
1464 | SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)), | |
1465 | 16, | |
1466 | SCR_REG_REG (scntl2, SCR_OR, WSR), | |
1467 | 0, | |
1468 | SCR_JUMP, | |
1469 | PADDR_B (data_ovrun2), | |
1470 | /* | |
1471 | * Finally check against DATA IN phase. | |
1472 | * Signal data overrun to the C code | |
1473 | * and jump to dispatcher if not so. | |
1474 | * Read 1 byte otherwise and count it. | |
1475 | */ | |
1476 | SCR_JUMPR ^ IFTRUE (WHEN (SCR_DATA_IN)), | |
1477 | 16, | |
1478 | SCR_INT, | |
1479 | SIR_DATA_OVERRUN, | |
1480 | SCR_JUMP, | |
1481 | PADDR_A (dispatch), | |
1482 | SCR_CHMOV_ABS (1) ^ SCR_DATA_IN, | |
1483 | HADDR_1 (scratch), | |
1484 | }/*-------------------------< DATA_OVRUN2 >----------------------*/,{ | |
1485 | /* | |
1486 | * Count this byte. | |
1487 | * This will allow to return a negative | |
1488 | * residual to user. | |
1489 | */ | |
1490 | SCR_REG_REG (scratcha, SCR_ADD, 0x01), | |
1491 | 0, | |
1492 | SCR_REG_REG (scratcha1, SCR_ADDC, 0), | |
1493 | 0, | |
1494 | SCR_REG_REG (scratcha2, SCR_ADDC, 0), | |
1495 | 0, | |
1496 | /* | |
1497 | * .. and repeat as required. | |
1498 | */ | |
1499 | SCR_JUMP, | |
1500 | PADDR_B (data_ovrun1), | |
1501 | }/*-------------------------< ABORT_RESEL >----------------------*/,{ | |
1502 | SCR_SET (SCR_ATN), | |
1503 | 0, | |
1504 | SCR_CLR (SCR_ACK), | |
1505 | 0, | |
1506 | /* | |
1507 | * send the abort/abortag/reset message | |
1508 | * we expect an immediate disconnect | |
1509 | */ | |
1510 | SCR_REG_REG (scntl2, SCR_AND, 0x7f), | |
1511 | 0, | |
1512 | SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, | |
1513 | HADDR_1 (msgout), | |
1514 | SCR_CLR (SCR_ACK|SCR_ATN), | |
1515 | 0, | |
1516 | SCR_WAIT_DISC, | |
1517 | 0, | |
1518 | SCR_INT, | |
1519 | SIR_RESEL_ABORTED, | |
1520 | SCR_JUMP, | |
1521 | PADDR_A (start), | |
1522 | }/*-------------------------< RESEND_IDENT >---------------------*/,{ | |
1523 | /* | |
1524 | * The target stays in MSG OUT phase after having acked | |
1525 | * Identify [+ Tag [+ Extended message ]]. Targets shall | |
1526 | * behave this way on parity error. | |
1527 | * We must send it again all the messages. | |
1528 | */ | |
1529 | SCR_SET (SCR_ATN), /* Shall be asserted 2 deskew delays before the */ | |
1530 | 0, /* 1rst ACK = 90 ns. Hope the chip isn't too fast */ | |
1531 | SCR_JUMP, | |
1532 | PADDR_A (send_ident), | |
1533 | }/*-------------------------< IDENT_BREAK >----------------------*/,{ | |
1534 | SCR_CLR (SCR_ATN), | |
1535 | 0, | |
1536 | SCR_JUMP, | |
1537 | PADDR_A (select2), | |
1538 | }/*-------------------------< IDENT_BREAK_ATN >------------------*/,{ | |
1539 | SCR_SET (SCR_ATN), | |
1540 | 0, | |
1541 | SCR_JUMP, | |
1542 | PADDR_A (select2), | |
1543 | }/*-------------------------< SDATA_IN >-------------------------*/,{ | |
1544 | SCR_CHMOV_TBL ^ SCR_DATA_IN, | |
1545 | offsetof (struct sym_dsb, sense), | |
1546 | SCR_CALL, | |
1547 | PADDR_A (datai_done), | |
1548 | SCR_JUMP, | |
1549 | PADDR_B (data_ovrun), | |
1550 | }/*-------------------------< RESEL_BAD_LUN >--------------------*/,{ | |
1551 | /* | |
1552 | * Message is an IDENTIFY, but lun is unknown. | |
1553 | * Signal problem to C code for logging the event. | |
1554 | * Send a M_ABORT to clear all pending tasks. | |
1555 | */ | |
1556 | SCR_INT, | |
1557 | SIR_RESEL_BAD_LUN, | |
1558 | SCR_JUMP, | |
1559 | PADDR_B (abort_resel), | |
1560 | }/*-------------------------< BAD_I_T_L >------------------------*/,{ | |
1561 | /* | |
1562 | * We donnot have a task for that I_T_L. | |
1563 | * Signal problem to C code for logging the event. | |
1564 | * Send a M_ABORT message. | |
1565 | */ | |
1566 | SCR_INT, | |
1567 | SIR_RESEL_BAD_I_T_L, | |
1568 | SCR_JUMP, | |
1569 | PADDR_B (abort_resel), | |
1570 | }/*-------------------------< BAD_I_T_L_Q >----------------------*/,{ | |
1571 | /* | |
1572 | * We donnot have a task that matches the tag. | |
1573 | * Signal problem to C code for logging the event. | |
1574 | * Send a M_ABORTTAG message. | |
1575 | */ | |
1576 | SCR_INT, | |
1577 | SIR_RESEL_BAD_I_T_L_Q, | |
1578 | SCR_JUMP, | |
1579 | PADDR_B (abort_resel), | |
1580 | }/*-------------------------< BAD_STATUS >-----------------------*/,{ | |
1581 | /* | |
1582 | * Anything different from INTERMEDIATE | |
1583 | * CONDITION MET should be a bad SCSI status, | |
1584 | * given that GOOD status has already been tested. | |
1585 | * Call the C code. | |
1586 | */ | |
1587 | SCR_LOAD_ABS (scratcha, 4), | |
1588 | PADDR_B (startpos), | |
1589 | SCR_INT ^ IFFALSE (DATA (S_COND_MET)), | |
1590 | SIR_BAD_SCSI_STATUS, | |
1591 | SCR_RETURN, | |
1592 | 0, | |
1593 | }/*-------------------------< PM_HANDLE >------------------------*/,{ | |
1594 | /* | |
1595 | * Phase mismatch handling. | |
1596 | * | |
1597 | * Since we have to deal with 2 SCSI data pointers | |
1598 | * (current and saved), we need at least 2 contexts. | |
1599 | * Each context (pm0 and pm1) has a saved area, a | |
1600 | * SAVE mini-script and a DATA phase mini-script. | |
1601 | */ | |
1602 | /* | |
1603 | * Get the PM handling flags. | |
1604 | */ | |
1605 | SCR_FROM_REG (HF_REG), | |
1606 | 0, | |
1607 | /* | |
1608 | * If no flags (1rst PM for example), avoid | |
1609 | * all the below heavy flags testing. | |
1610 | * This makes the normal case a bit faster. | |
1611 | */ | |
1612 | SCR_JUMP ^ IFTRUE (MASK (0, (HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED))), | |
1613 | PADDR_B (pm_handle1), | |
1614 | /* | |
1615 | * If we received a SAVE DP, switch to the | |
1616 | * other PM context since the savep may point | |
1617 | * to the current PM context. | |
1618 | */ | |
1619 | SCR_JUMPR ^ IFFALSE (MASK (HF_DP_SAVED, HF_DP_SAVED)), | |
1620 | 8, | |
1621 | SCR_REG_REG (sfbr, SCR_XOR, HF_ACT_PM), | |
1622 | 0, | |
1623 | /* | |
1624 | * If we have been interrupt in a PM DATA mini-script, | |
1625 | * we take the return address from the corresponding | |
1626 | * saved area. | |
1627 | * This ensure the return address always points to the | |
1628 | * main DATA script for this transfer. | |
1629 | */ | |
1630 | SCR_JUMP ^ IFTRUE (MASK (0, (HF_IN_PM0 | HF_IN_PM1))), | |
1631 | PADDR_B (pm_handle1), | |
1632 | SCR_JUMPR ^ IFFALSE (MASK (HF_IN_PM0, HF_IN_PM0)), | |
1633 | 16, | |
1634 | SCR_LOAD_REL (ia, 4), | |
1635 | offsetof(struct sym_ccb, phys.pm0.ret), | |
1636 | SCR_JUMP, | |
1637 | PADDR_B (pm_save), | |
1638 | SCR_LOAD_REL (ia, 4), | |
1639 | offsetof(struct sym_ccb, phys.pm1.ret), | |
1640 | SCR_JUMP, | |
1641 | PADDR_B (pm_save), | |
1642 | }/*-------------------------< PM_HANDLE1 >-----------------------*/,{ | |
1643 | /* | |
1644 | * Normal case. | |
1645 | * Update the return address so that it | |
1646 | * will point after the interrupted MOVE. | |
1647 | */ | |
1648 | SCR_REG_REG (ia, SCR_ADD, 8), | |
1649 | 0, | |
1650 | SCR_REG_REG (ia1, SCR_ADDC, 0), | |
1651 | 0, | |
1652 | }/*-------------------------< PM_SAVE >--------------------------*/,{ | |
1653 | /* | |
1654 | * Clear all the flags that told us if we were | |
1655 | * interrupted in a PM DATA mini-script and/or | |
1656 | * we received a SAVE DP. | |
1657 | */ | |
1658 | SCR_SFBR_REG (HF_REG, SCR_AND, (~(HF_IN_PM0|HF_IN_PM1|HF_DP_SAVED))), | |
1659 | 0, | |
1660 | /* | |
1661 | * Choose the current PM context. | |
1662 | */ | |
1663 | SCR_JUMP ^ IFTRUE (MASK (HF_ACT_PM, HF_ACT_PM)), | |
1664 | PADDR_B (pm1_save), | |
1665 | }/*-------------------------< PM0_SAVE >-------------------------*/,{ | |
1666 | SCR_STORE_REL (ia, 4), | |
1667 | offsetof(struct sym_ccb, phys.pm0.ret), | |
1668 | /* | |
1669 | * If WSR bit is set, either UA and RBC may | |
1670 | * have to be changed whether the device wants | |
1671 | * to ignore this residue or not. | |
1672 | */ | |
1673 | SCR_FROM_REG (scntl2), | |
1674 | 0, | |
1675 | SCR_CALL ^ IFTRUE (MASK (WSR, WSR)), | |
1676 | PADDR_B (pm_wsr_handle), | |
1677 | /* | |
1678 | * Save the remaining byte count, the updated | |
1679 | * address and the return address. | |
1680 | */ | |
1681 | SCR_STORE_REL (rbc, 4), | |
1682 | offsetof(struct sym_ccb, phys.pm0.sg.size), | |
1683 | SCR_STORE_REL (ua, 4), | |
1684 | offsetof(struct sym_ccb, phys.pm0.sg.addr), | |
1685 | /* | |
1686 | * Set the current pointer at the PM0 DATA mini-script. | |
1687 | */ | |
1688 | SCR_LOAD_ABS (ia, 4), | |
1689 | PADDR_B (pm0_data_addr), | |
1690 | }/*-------------------------< PM_SAVE_END >----------------------*/,{ | |
1691 | SCR_STORE_REL (ia, 4), | |
1692 | offsetof(struct sym_ccb, phys.head.lastp), | |
1693 | SCR_JUMP, | |
1694 | PADDR_A (dispatch), | |
1695 | }/*-------------------------< PM1_SAVE >-------------------------*/,{ | |
1696 | SCR_STORE_REL (ia, 4), | |
1697 | offsetof(struct sym_ccb, phys.pm1.ret), | |
1698 | /* | |
1699 | * If WSR bit is set, either UA and RBC may | |
1700 | * have to be changed whether the device wants | |
1701 | * to ignore this residue or not. | |
1702 | */ | |
1703 | SCR_FROM_REG (scntl2), | |
1704 | 0, | |
1705 | SCR_CALL ^ IFTRUE (MASK (WSR, WSR)), | |
1706 | PADDR_B (pm_wsr_handle), | |
1707 | /* | |
1708 | * Save the remaining byte count, the updated | |
1709 | * address and the return address. | |
1710 | */ | |
1711 | SCR_STORE_REL (rbc, 4), | |
1712 | offsetof(struct sym_ccb, phys.pm1.sg.size), | |
1713 | SCR_STORE_REL (ua, 4), | |
1714 | offsetof(struct sym_ccb, phys.pm1.sg.addr), | |
1715 | /* | |
1716 | * Set the current pointer at the PM1 DATA mini-script. | |
1717 | */ | |
1718 | SCR_LOAD_ABS (ia, 4), | |
1719 | PADDR_B (pm1_data_addr), | |
1720 | SCR_JUMP, | |
1721 | PADDR_B (pm_save_end), | |
1722 | }/*-------------------------< PM_WSR_HANDLE >--------------------*/,{ | |
1723 | /* | |
1724 | * Phase mismatch handling from SCRIPT with WSR set. | |
1725 | * Such a condition can occur if the chip wants to | |
1726 | * execute a CHMOV(size > 1) when the WSR bit is | |
1727 | * set and the target changes PHASE. | |
1728 | * | |
1729 | * We must move the residual byte to memory. | |
1730 | * | |
1731 | * UA contains bit 0..31 of the address to | |
1732 | * move the residual byte. | |
1733 | * Move it to the table indirect. | |
1734 | */ | |
1735 | SCR_STORE_REL (ua, 4), | |
1736 | offsetof (struct sym_ccb, phys.wresid.addr), | |
1737 | /* | |
1738 | * Increment UA (move address to next position). | |
1739 | */ | |
1740 | SCR_REG_REG (ua, SCR_ADD, 1), | |
1741 | 0, | |
1742 | SCR_REG_REG (ua1, SCR_ADDC, 0), | |
1743 | 0, | |
1744 | SCR_REG_REG (ua2, SCR_ADDC, 0), | |
1745 | 0, | |
1746 | SCR_REG_REG (ua3, SCR_ADDC, 0), | |
1747 | 0, | |
1748 | /* | |
1749 | * Compute SCRATCHA as: | |
1750 | * - size to transfer = 1 byte. | |
1751 | * - bit 24..31 = high address bit [32...39]. | |
1752 | */ | |
1753 | SCR_LOAD_ABS (scratcha, 4), | |
1754 | PADDR_B (zero), | |
1755 | SCR_REG_REG (scratcha, SCR_OR, 1), | |
1756 | 0, | |
1757 | SCR_FROM_REG (rbc3), | |
1758 | 0, | |
1759 | SCR_TO_REG (scratcha3), | |
1760 | 0, | |
1761 | /* | |
1762 | * Move this value to the table indirect. | |
1763 | */ | |
1764 | SCR_STORE_REL (scratcha, 4), | |
1765 | offsetof (struct sym_ccb, phys.wresid.size), | |
1766 | /* | |
1767 | * Wait for a valid phase. | |
1768 | * While testing with bogus QUANTUM drives, the C1010 | |
1769 | * sometimes raised a spurious phase mismatch with | |
1770 | * WSR and the CHMOV(1) triggered another PM. | |
c03983ac | 1771 | * Waiting explicitly for the PHASE seemed to avoid |
1da177e4 LT |
1772 | * the nested phase mismatch. Btw, this didn't happen |
1773 | * using my IBM drives. | |
1774 | */ | |
1775 | SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_IN)), | |
1776 | 0, | |
1777 | /* | |
1778 | * Perform the move of the residual byte. | |
1779 | */ | |
1780 | SCR_CHMOV_TBL ^ SCR_DATA_IN, | |
1781 | offsetof (struct sym_ccb, phys.wresid), | |
1782 | /* | |
1783 | * We can now handle the phase mismatch with UA fixed. | |
1784 | * RBC[0..23]=0 is a special case that does not require | |
1785 | * a PM context. The C code also checks against this. | |
1786 | */ | |
1787 | SCR_FROM_REG (rbc), | |
1788 | 0, | |
1789 | SCR_RETURN ^ IFFALSE (DATA (0)), | |
1790 | 0, | |
1791 | SCR_FROM_REG (rbc1), | |
1792 | 0, | |
1793 | SCR_RETURN ^ IFFALSE (DATA (0)), | |
1794 | 0, | |
1795 | SCR_FROM_REG (rbc2), | |
1796 | 0, | |
1797 | SCR_RETURN ^ IFFALSE (DATA (0)), | |
1798 | 0, | |
1799 | /* | |
1800 | * RBC[0..23]=0. | |
1801 | * Not only we donnot need a PM context, but this would | |
1802 | * lead to a bogus CHMOV(0). This condition means that | |
1803 | * the residual was the last byte to move from this CHMOV. | |
1804 | * So, we just have to move the current data script pointer | |
1805 | * (i.e. TEMP) to the SCRIPTS address following the | |
1806 | * interrupted CHMOV and jump to dispatcher. | |
1807 | * IA contains the data pointer to save. | |
1808 | */ | |
1809 | SCR_JUMP, | |
1810 | PADDR_B (pm_save_end), | |
1811 | }/*-------------------------< WSR_MA_HELPER >--------------------*/,{ | |
1812 | /* | |
1813 | * Helper for the C code when WSR bit is set. | |
1814 | * Perform the move of the residual byte. | |
1815 | */ | |
1816 | SCR_CHMOV_TBL ^ SCR_DATA_IN, | |
1817 | offsetof (struct sym_ccb, phys.wresid), | |
1818 | SCR_JUMP, | |
1819 | PADDR_A (dispatch), | |
1820 | ||
1da177e4 LT |
1821 | }/*-------------------------< ZERO >-----------------------------*/,{ |
1822 | SCR_DATA_ZERO, | |
1823 | }/*-------------------------< SCRATCH >--------------------------*/,{ | |
1824 | SCR_DATA_ZERO, | |
1825 | }/*-------------------------< PM0_DATA_ADDR >--------------------*/,{ | |
1826 | SCR_DATA_ZERO, | |
1827 | }/*-------------------------< PM1_DATA_ADDR >--------------------*/,{ | |
1828 | SCR_DATA_ZERO, | |
1829 | }/*-------------------------< DONE_POS >-------------------------*/,{ | |
1830 | SCR_DATA_ZERO, | |
1831 | }/*-------------------------< STARTPOS >-------------------------*/,{ | |
1832 | SCR_DATA_ZERO, | |
1833 | }/*-------------------------< TARGTBL >--------------------------*/,{ | |
1834 | SCR_DATA_ZERO, | |
1835 | }/*-------------------------<>-----------------------------------*/ | |
1836 | }; | |
1837 | ||
1838 | static struct SYM_FWZ_SCR SYM_FWZ_SCR = { | |
1839 | /*-------------------------< SNOOPTEST >------------------------*/{ | |
1840 | /* | |
1841 | * Read the variable from memory. | |
1842 | */ | |
1843 | SCR_LOAD_REL (scratcha, 4), | |
1844 | offsetof(struct sym_hcb, scratch), | |
1845 | /* | |
1846 | * Write the variable to memory. | |
1847 | */ | |
1848 | SCR_STORE_REL (temp, 4), | |
1849 | offsetof(struct sym_hcb, scratch), | |
1850 | /* | |
1851 | * Read back the variable from memory. | |
1852 | */ | |
1853 | SCR_LOAD_REL (temp, 4), | |
1854 | offsetof(struct sym_hcb, scratch), | |
1855 | }/*-------------------------< SNOOPEND >-------------------------*/,{ | |
1856 | /* | |
1857 | * And stop. | |
1858 | */ | |
1859 | SCR_INT, | |
1860 | 99, | |
1861 | }/*-------------------------<>-----------------------------------*/ | |
1862 | }; |