Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * scsi_scan.c | |
3 | * | |
4 | * Copyright (C) 2000 Eric Youngdale, | |
5 | * Copyright (C) 2002 Patrick Mansfield | |
6 | * | |
7 | * The general scanning/probing algorithm is as follows, exceptions are | |
8 | * made to it depending on device specific flags, compilation options, and | |
9 | * global variable (boot or module load time) settings. | |
10 | * | |
11 | * A specific LUN is scanned via an INQUIRY command; if the LUN has a | |
f64a181d | 12 | * device attached, a scsi_device is allocated and setup for it. |
1da177e4 LT |
13 | * |
14 | * For every id of every channel on the given host: | |
15 | * | |
16 | * Scan LUN 0; if the target responds to LUN 0 (even if there is no | |
17 | * device or storage attached to LUN 0): | |
18 | * | |
19 | * If LUN 0 has a device attached, allocate and setup a | |
f64a181d | 20 | * scsi_device for it. |
1da177e4 LT |
21 | * |
22 | * If target is SCSI-3 or up, issue a REPORT LUN, and scan | |
23 | * all of the LUNs returned by the REPORT LUN; else, | |
24 | * sequentially scan LUNs up until some maximum is reached, | |
25 | * or a LUN is seen that cannot have a device attached to it. | |
26 | */ | |
27 | ||
28 | #include <linux/config.h> | |
29 | #include <linux/module.h> | |
30 | #include <linux/moduleparam.h> | |
31 | #include <linux/init.h> | |
32 | #include <linux/blkdev.h> | |
33 | #include <asm/semaphore.h> | |
34 | ||
35 | #include <scsi/scsi.h> | |
36 | #include <scsi/scsi_device.h> | |
37 | #include <scsi/scsi_driver.h> | |
38 | #include <scsi/scsi_devinfo.h> | |
39 | #include <scsi/scsi_host.h> | |
40 | #include <scsi/scsi_request.h> | |
41 | #include <scsi/scsi_transport.h> | |
42 | #include <scsi/scsi_eh.h> | |
43 | ||
44 | #include "scsi_priv.h" | |
45 | #include "scsi_logging.h" | |
46 | ||
47 | #define ALLOC_FAILURE_MSG KERN_ERR "%s: Allocation failure during" \ | |
48 | " SCSI scanning, some SCSI devices might not be configured\n" | |
49 | ||
50 | /* | |
51 | * Default timeout | |
52 | */ | |
53 | #define SCSI_TIMEOUT (2*HZ) | |
54 | ||
55 | /* | |
56 | * Prefix values for the SCSI id's (stored in driverfs name field) | |
57 | */ | |
58 | #define SCSI_UID_SER_NUM 'S' | |
59 | #define SCSI_UID_UNKNOWN 'Z' | |
60 | ||
61 | /* | |
62 | * Return values of some of the scanning functions. | |
63 | * | |
64 | * SCSI_SCAN_NO_RESPONSE: no valid response received from the target, this | |
65 | * includes allocation or general failures preventing IO from being sent. | |
66 | * | |
67 | * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is available | |
68 | * on the given LUN. | |
69 | * | |
70 | * SCSI_SCAN_LUN_PRESENT: target responded, and a device is available on a | |
71 | * given LUN. | |
72 | */ | |
73 | #define SCSI_SCAN_NO_RESPONSE 0 | |
74 | #define SCSI_SCAN_TARGET_PRESENT 1 | |
75 | #define SCSI_SCAN_LUN_PRESENT 2 | |
76 | ||
0ad78200 | 77 | static const char *scsi_null_device_strs = "nullnullnullnull"; |
1da177e4 LT |
78 | |
79 | #define MAX_SCSI_LUNS 512 | |
80 | ||
81 | #ifdef CONFIG_SCSI_MULTI_LUN | |
82 | static unsigned int max_scsi_luns = MAX_SCSI_LUNS; | |
83 | #else | |
84 | static unsigned int max_scsi_luns = 1; | |
85 | #endif | |
86 | ||
87 | module_param_named(max_luns, max_scsi_luns, int, S_IRUGO|S_IWUSR); | |
88 | MODULE_PARM_DESC(max_luns, | |
89 | "last scsi LUN (should be between 1 and 2^32-1)"); | |
90 | ||
91 | /* | |
92 | * max_scsi_report_luns: the maximum number of LUNS that will be | |
93 | * returned from the REPORT LUNS command. 8 times this value must | |
94 | * be allocated. In theory this could be up to an 8 byte value, but | |
95 | * in practice, the maximum number of LUNs suppored by any device | |
96 | * is about 16k. | |
97 | */ | |
98 | static unsigned int max_scsi_report_luns = 511; | |
99 | ||
100 | module_param_named(max_report_luns, max_scsi_report_luns, int, S_IRUGO|S_IWUSR); | |
101 | MODULE_PARM_DESC(max_report_luns, | |
102 | "REPORT LUNS maximum number of LUNS received (should be" | |
103 | " between 1 and 16384)"); | |
104 | ||
105 | static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ+3; | |
106 | ||
107 | module_param_named(inq_timeout, scsi_inq_timeout, int, S_IRUGO|S_IWUSR); | |
108 | MODULE_PARM_DESC(inq_timeout, | |
109 | "Timeout (in seconds) waiting for devices to answer INQUIRY." | |
110 | " Default is 5. Some non-compliant devices need more."); | |
111 | ||
112 | /** | |
113 | * scsi_unlock_floptical - unlock device via a special MODE SENSE command | |
39216033 | 114 | * @sdev: scsi device to send command to |
1da177e4 LT |
115 | * @result: area to store the result of the MODE SENSE |
116 | * | |
117 | * Description: | |
39216033 | 118 | * Send a vendor specific MODE SENSE (not a MODE SELECT) command. |
1da177e4 LT |
119 | * Called for BLIST_KEY devices. |
120 | **/ | |
39216033 | 121 | static void scsi_unlock_floptical(struct scsi_device *sdev, |
1da177e4 LT |
122 | unsigned char *result) |
123 | { | |
124 | unsigned char scsi_cmd[MAX_COMMAND_SIZE]; | |
125 | ||
126 | printk(KERN_NOTICE "scsi: unlocking floptical drive\n"); | |
127 | scsi_cmd[0] = MODE_SENSE; | |
128 | scsi_cmd[1] = 0; | |
129 | scsi_cmd[2] = 0x2e; | |
130 | scsi_cmd[3] = 0; | |
39216033 | 131 | scsi_cmd[4] = 0x2a; /* size */ |
1da177e4 | 132 | scsi_cmd[5] = 0; |
39216033 JB |
133 | scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL, |
134 | SCSI_TIMEOUT, 3); | |
1da177e4 LT |
135 | } |
136 | ||
137 | /** | |
138 | * print_inquiry - printk the inquiry information | |
139 | * @inq_result: printk this SCSI INQUIRY | |
140 | * | |
141 | * Description: | |
142 | * printk the vendor, model, and other information found in the | |
143 | * INQUIRY data in @inq_result. | |
144 | * | |
145 | * Notes: | |
146 | * Remove this, and replace with a hotplug event that logs any | |
147 | * relevant information. | |
148 | **/ | |
149 | static void print_inquiry(unsigned char *inq_result) | |
150 | { | |
151 | int i; | |
152 | ||
153 | printk(KERN_NOTICE " Vendor: "); | |
154 | for (i = 8; i < 16; i++) | |
155 | if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) | |
156 | printk("%c", inq_result[i]); | |
157 | else | |
158 | printk(" "); | |
159 | ||
160 | printk(" Model: "); | |
161 | for (i = 16; i < 32; i++) | |
162 | if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) | |
163 | printk("%c", inq_result[i]); | |
164 | else | |
165 | printk(" "); | |
166 | ||
167 | printk(" Rev: "); | |
168 | for (i = 32; i < 36; i++) | |
169 | if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) | |
170 | printk("%c", inq_result[i]); | |
171 | else | |
172 | printk(" "); | |
173 | ||
174 | printk("\n"); | |
175 | ||
176 | i = inq_result[0] & 0x1f; | |
177 | ||
178 | printk(KERN_NOTICE " Type: %s ", | |
179 | i < | |
180 | MAX_SCSI_DEVICE_CODE ? scsi_device_types[i] : | |
181 | "Unknown "); | |
182 | printk(" ANSI SCSI revision: %02x", | |
183 | inq_result[2] & 0x07); | |
184 | if ((inq_result[2] & 0x07) == 1 && (inq_result[3] & 0x0f) == 1) | |
185 | printk(" CCS\n"); | |
186 | else | |
187 | printk("\n"); | |
188 | } | |
189 | ||
190 | /** | |
191 | * scsi_alloc_sdev - allocate and setup a scsi_Device | |
192 | * | |
193 | * Description: | |
194 | * Allocate, initialize for io, and return a pointer to a scsi_Device. | |
195 | * Stores the @shost, @channel, @id, and @lun in the scsi_Device, and | |
196 | * adds scsi_Device to the appropriate list. | |
197 | * | |
198 | * Return value: | |
199 | * scsi_Device pointer, or NULL on failure. | |
200 | **/ | |
201 | static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, | |
202 | unsigned int lun, void *hostdata) | |
203 | { | |
204 | struct scsi_device *sdev; | |
205 | int display_failure_msg = 1, ret; | |
206 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | |
207 | ||
24669f75 | 208 | sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size, |
1da177e4 LT |
209 | GFP_ATOMIC); |
210 | if (!sdev) | |
211 | goto out; | |
212 | ||
1da177e4 LT |
213 | sdev->vendor = scsi_null_device_strs; |
214 | sdev->model = scsi_null_device_strs; | |
215 | sdev->rev = scsi_null_device_strs; | |
216 | sdev->host = shost; | |
217 | sdev->id = starget->id; | |
218 | sdev->lun = lun; | |
219 | sdev->channel = starget->channel; | |
220 | sdev->sdev_state = SDEV_CREATED; | |
221 | INIT_LIST_HEAD(&sdev->siblings); | |
222 | INIT_LIST_HEAD(&sdev->same_target_siblings); | |
223 | INIT_LIST_HEAD(&sdev->cmd_list); | |
224 | INIT_LIST_HEAD(&sdev->starved_entry); | |
225 | spin_lock_init(&sdev->list_lock); | |
226 | ||
227 | sdev->sdev_gendev.parent = get_device(&starget->dev); | |
228 | sdev->sdev_target = starget; | |
229 | ||
230 | /* usually NULL and set by ->slave_alloc instead */ | |
231 | sdev->hostdata = hostdata; | |
232 | ||
233 | /* if the device needs this changing, it may do so in the | |
234 | * slave_configure function */ | |
235 | sdev->max_device_blocked = SCSI_DEFAULT_DEVICE_BLOCKED; | |
236 | ||
237 | /* | |
238 | * Some low level driver could use device->type | |
239 | */ | |
240 | sdev->type = -1; | |
241 | ||
242 | /* | |
243 | * Assume that the device will have handshaking problems, | |
244 | * and then fix this field later if it turns out it | |
245 | * doesn't | |
246 | */ | |
247 | sdev->borken = 1; | |
248 | ||
1da177e4 LT |
249 | sdev->request_queue = scsi_alloc_queue(sdev); |
250 | if (!sdev->request_queue) { | |
251 | /* release fn is set up in scsi_sysfs_device_initialise, so | |
252 | * have to free and put manually here */ | |
253 | put_device(&starget->dev); | |
93f56089 | 254 | kfree(sdev); |
1da177e4 LT |
255 | goto out; |
256 | } | |
257 | ||
258 | sdev->request_queue->queuedata = sdev; | |
259 | scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); | |
260 | ||
261 | scsi_sysfs_device_initialize(sdev); | |
262 | ||
263 | if (shost->hostt->slave_alloc) { | |
264 | ret = shost->hostt->slave_alloc(sdev); | |
265 | if (ret) { | |
266 | /* | |
267 | * if LLDD reports slave not present, don't clutter | |
268 | * console with alloc failure messages | |
1da177e4 LT |
269 | */ |
270 | if (ret == -ENXIO) | |
271 | display_failure_msg = 0; | |
272 | goto out_device_destroy; | |
273 | } | |
274 | } | |
275 | ||
276 | return sdev; | |
277 | ||
278 | out_device_destroy: | |
279 | transport_destroy_device(&sdev->sdev_gendev); | |
1da177e4 LT |
280 | put_device(&sdev->sdev_gendev); |
281 | out: | |
282 | if (display_failure_msg) | |
283 | printk(ALLOC_FAILURE_MSG, __FUNCTION__); | |
284 | return NULL; | |
285 | } | |
286 | ||
287 | static void scsi_target_dev_release(struct device *dev) | |
288 | { | |
289 | struct device *parent = dev->parent; | |
290 | struct scsi_target *starget = to_scsi_target(dev); | |
a283bd37 | 291 | |
1da177e4 LT |
292 | kfree(starget); |
293 | put_device(parent); | |
294 | } | |
295 | ||
296 | int scsi_is_target_device(const struct device *dev) | |
297 | { | |
298 | return dev->release == scsi_target_dev_release; | |
299 | } | |
300 | EXPORT_SYMBOL(scsi_is_target_device); | |
301 | ||
302 | static struct scsi_target *__scsi_find_target(struct device *parent, | |
303 | int channel, uint id) | |
304 | { | |
305 | struct scsi_target *starget, *found_starget = NULL; | |
306 | struct Scsi_Host *shost = dev_to_shost(parent); | |
307 | /* | |
308 | * Search for an existing target for this sdev. | |
309 | */ | |
310 | list_for_each_entry(starget, &shost->__targets, siblings) { | |
311 | if (starget->id == id && | |
312 | starget->channel == channel) { | |
313 | found_starget = starget; | |
314 | break; | |
315 | } | |
316 | } | |
317 | if (found_starget) | |
318 | get_device(&found_starget->dev); | |
319 | ||
320 | return found_starget; | |
321 | } | |
322 | ||
323 | static struct scsi_target *scsi_alloc_target(struct device *parent, | |
324 | int channel, uint id) | |
325 | { | |
326 | struct Scsi_Host *shost = dev_to_shost(parent); | |
327 | struct device *dev = NULL; | |
328 | unsigned long flags; | |
329 | const int size = sizeof(struct scsi_target) | |
330 | + shost->transportt->target_size; | |
5c44cd2a | 331 | struct scsi_target *starget; |
1da177e4 | 332 | struct scsi_target *found_target; |
32f95792 | 333 | int error; |
1da177e4 | 334 | |
24669f75 | 335 | starget = kzalloc(size, GFP_KERNEL); |
1da177e4 LT |
336 | if (!starget) { |
337 | printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__); | |
338 | return NULL; | |
339 | } | |
1da177e4 LT |
340 | dev = &starget->dev; |
341 | device_initialize(dev); | |
342 | starget->reap_ref = 1; | |
343 | dev->parent = get_device(parent); | |
344 | dev->release = scsi_target_dev_release; | |
345 | sprintf(dev->bus_id, "target%d:%d:%d", | |
346 | shost->host_no, channel, id); | |
347 | starget->id = id; | |
348 | starget->channel = channel; | |
349 | INIT_LIST_HEAD(&starget->siblings); | |
350 | INIT_LIST_HEAD(&starget->devices); | |
ffedb452 JB |
351 | starget->state = STARGET_RUNNING; |
352 | retry: | |
1da177e4 LT |
353 | spin_lock_irqsave(shost->host_lock, flags); |
354 | ||
355 | found_target = __scsi_find_target(parent, channel, id); | |
356 | if (found_target) | |
357 | goto found; | |
358 | ||
359 | list_add_tail(&starget->siblings, &shost->__targets); | |
360 | spin_unlock_irqrestore(shost->host_lock, flags); | |
361 | /* allocate and add */ | |
a283bd37 | 362 | transport_setup_device(dev); |
32f95792 BK |
363 | error = device_add(dev); |
364 | if (error) { | |
365 | dev_err(dev, "target device_add failed, error %d\n", error); | |
366 | spin_lock_irqsave(shost->host_lock, flags); | |
367 | list_del_init(&starget->siblings); | |
368 | spin_unlock_irqrestore(shost->host_lock, flags); | |
369 | transport_destroy_device(dev); | |
370 | put_device(parent); | |
371 | kfree(starget); | |
372 | return NULL; | |
373 | } | |
a283bd37 JB |
374 | transport_add_device(dev); |
375 | if (shost->hostt->target_alloc) { | |
32f95792 | 376 | error = shost->hostt->target_alloc(starget); |
a283bd37 JB |
377 | |
378 | if(error) { | |
379 | dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error); | |
380 | /* don't want scsi_target_reap to do the final | |
381 | * put because it will be under the host lock */ | |
382 | get_device(dev); | |
383 | scsi_target_reap(starget); | |
384 | put_device(dev); | |
385 | return NULL; | |
386 | } | |
387 | } | |
388 | ||
1da177e4 LT |
389 | return starget; |
390 | ||
391 | found: | |
392 | found_target->reap_ref++; | |
393 | spin_unlock_irqrestore(shost->host_lock, flags); | |
394 | put_device(parent); | |
ffedb452 JB |
395 | if (found_target->state != STARGET_DEL) { |
396 | kfree(starget); | |
397 | return found_target; | |
398 | } | |
399 | /* Unfortunately, we found a dying target; need to | |
400 | * wait until it's dead before we can get a new one */ | |
401 | put_device(&found_target->dev); | |
402 | flush_scheduled_work(); | |
403 | goto retry; | |
1da177e4 LT |
404 | } |
405 | ||
65110b21 JB |
406 | static void scsi_target_reap_usercontext(void *data) |
407 | { | |
408 | struct scsi_target *starget = data; | |
863a930a JB |
409 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
410 | unsigned long flags; | |
411 | ||
ffedb452 JB |
412 | transport_remove_device(&starget->dev); |
413 | device_del(&starget->dev); | |
414 | transport_destroy_device(&starget->dev); | |
863a930a | 415 | spin_lock_irqsave(shost->host_lock, flags); |
a50a5e37 MA |
416 | if (shost->hostt->target_destroy) |
417 | shost->hostt->target_destroy(starget); | |
ffedb452 | 418 | list_del_init(&starget->siblings); |
863a930a | 419 | spin_unlock_irqrestore(shost->host_lock, flags); |
ffedb452 | 420 | put_device(&starget->dev); |
863a930a JB |
421 | } |
422 | ||
1da177e4 LT |
423 | /** |
424 | * scsi_target_reap - check to see if target is in use and destroy if not | |
425 | * | |
426 | * @starget: target to be checked | |
427 | * | |
428 | * This is used after removing a LUN or doing a last put of the target | |
429 | * it checks atomically that nothing is using the target and removes | |
430 | * it if so. | |
431 | */ | |
432 | void scsi_target_reap(struct scsi_target *starget) | |
433 | { | |
ffedb452 JB |
434 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
435 | unsigned long flags; | |
436 | ||
437 | spin_lock_irqsave(shost->host_lock, flags); | |
438 | ||
439 | if (--starget->reap_ref == 0 && list_empty(&starget->devices)) { | |
440 | BUG_ON(starget->state == STARGET_DEL); | |
441 | starget->state = STARGET_DEL; | |
442 | spin_unlock_irqrestore(shost->host_lock, flags); | |
443 | execute_in_process_context(scsi_target_reap_usercontext, | |
444 | starget, &starget->ew); | |
445 | return; | |
446 | ||
447 | } | |
448 | spin_unlock_irqrestore(shost->host_lock, flags); | |
449 | ||
450 | return; | |
1da177e4 LT |
451 | } |
452 | ||
453 | /** | |
454 | * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY | |
39216033 | 455 | * @sdev: scsi_device to probe |
1da177e4 | 456 | * @inq_result: area to store the INQUIRY result |
39216033 | 457 | * @result_len: len of inq_result |
1da177e4 LT |
458 | * @bflags: store any bflags found here |
459 | * | |
460 | * Description: | |
39216033 | 461 | * Probe the lun associated with @req using a standard SCSI INQUIRY; |
1da177e4 | 462 | * |
39216033 | 463 | * If the INQUIRY is successful, zero is returned and the |
1da177e4 | 464 | * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length |
f64a181d | 465 | * are copied to the scsi_device any flags value is stored in *@bflags. |
1da177e4 | 466 | **/ |
39216033 JB |
467 | static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result, |
468 | int result_len, int *bflags) | |
1da177e4 | 469 | { |
1da177e4 LT |
470 | unsigned char scsi_cmd[MAX_COMMAND_SIZE]; |
471 | int first_inquiry_len, try_inquiry_len, next_inquiry_len; | |
472 | int response_len = 0; | |
39216033 | 473 | int pass, count, result; |
1da177e4 LT |
474 | struct scsi_sense_hdr sshdr; |
475 | ||
476 | *bflags = 0; | |
477 | ||
478 | /* Perform up to 3 passes. The first pass uses a conservative | |
479 | * transfer length of 36 unless sdev->inquiry_len specifies a | |
480 | * different value. */ | |
481 | first_inquiry_len = sdev->inquiry_len ? sdev->inquiry_len : 36; | |
482 | try_inquiry_len = first_inquiry_len; | |
483 | pass = 1; | |
484 | ||
485 | next_pass: | |
9ccfc756 JB |
486 | SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev, |
487 | "scsi scan: INQUIRY pass %d length %d\n", | |
488 | pass, try_inquiry_len)); | |
1da177e4 LT |
489 | |
490 | /* Each pass gets up to three chances to ignore Unit Attention */ | |
491 | for (count = 0; count < 3; ++count) { | |
492 | memset(scsi_cmd, 0, 6); | |
493 | scsi_cmd[0] = INQUIRY; | |
494 | scsi_cmd[4] = (unsigned char) try_inquiry_len; | |
1da177e4 LT |
495 | |
496 | memset(inq_result, 0, try_inquiry_len); | |
39216033 JB |
497 | |
498 | result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, | |
ea73a9f2 | 499 | inq_result, try_inquiry_len, &sshdr, |
39216033 | 500 | HZ / 2 + HZ * scsi_inq_timeout, 3); |
1da177e4 LT |
501 | |
502 | SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s " | |
503 | "with code 0x%x\n", | |
39216033 | 504 | result ? "failed" : "successful", result)); |
1da177e4 | 505 | |
39216033 | 506 | if (result) { |
1da177e4 LT |
507 | /* |
508 | * not-ready to ready transition [asc/ascq=0x28/0x0] | |
509 | * or power-on, reset [asc/ascq=0x29/0x0], continue. | |
510 | * INQUIRY should not yield UNIT_ATTENTION | |
511 | * but many buggy devices do so anyway. | |
512 | */ | |
39216033 | 513 | if ((driver_byte(result) & DRIVER_SENSE) && |
ea73a9f2 | 514 | scsi_sense_valid(&sshdr)) { |
1da177e4 LT |
515 | if ((sshdr.sense_key == UNIT_ATTENTION) && |
516 | ((sshdr.asc == 0x28) || | |
517 | (sshdr.asc == 0x29)) && | |
518 | (sshdr.ascq == 0)) | |
519 | continue; | |
520 | } | |
521 | } | |
522 | break; | |
523 | } | |
524 | ||
39216033 | 525 | if (result == 0) { |
1da177e4 LT |
526 | response_len = (unsigned char) inq_result[4] + 5; |
527 | if (response_len > 255) | |
528 | response_len = first_inquiry_len; /* sanity */ | |
529 | ||
530 | /* | |
531 | * Get any flags for this device. | |
532 | * | |
f64a181d CH |
533 | * XXX add a bflags to scsi_device, and replace the |
534 | * corresponding bit fields in scsi_device, so bflags | |
1da177e4 LT |
535 | * need not be passed as an argument. |
536 | */ | |
537 | *bflags = scsi_get_device_flags(sdev, &inq_result[8], | |
538 | &inq_result[16]); | |
539 | ||
540 | /* When the first pass succeeds we gain information about | |
541 | * what larger transfer lengths might work. */ | |
542 | if (pass == 1) { | |
543 | if (BLIST_INQUIRY_36 & *bflags) | |
544 | next_inquiry_len = 36; | |
545 | else if (BLIST_INQUIRY_58 & *bflags) | |
546 | next_inquiry_len = 58; | |
547 | else if (sdev->inquiry_len) | |
548 | next_inquiry_len = sdev->inquiry_len; | |
549 | else | |
550 | next_inquiry_len = response_len; | |
551 | ||
552 | /* If more data is available perform the second pass */ | |
553 | if (next_inquiry_len > try_inquiry_len) { | |
554 | try_inquiry_len = next_inquiry_len; | |
555 | pass = 2; | |
556 | goto next_pass; | |
557 | } | |
558 | } | |
559 | ||
560 | } else if (pass == 2) { | |
561 | printk(KERN_INFO "scsi scan: %d byte inquiry failed. " | |
562 | "Consider BLIST_INQUIRY_36 for this device\n", | |
563 | try_inquiry_len); | |
564 | ||
565 | /* If this pass failed, the third pass goes back and transfers | |
566 | * the same amount as we successfully got in the first pass. */ | |
567 | try_inquiry_len = first_inquiry_len; | |
568 | pass = 3; | |
569 | goto next_pass; | |
570 | } | |
571 | ||
572 | /* If the last transfer attempt got an error, assume the | |
573 | * peripheral doesn't exist or is dead. */ | |
39216033 JB |
574 | if (result) |
575 | return -EIO; | |
1da177e4 LT |
576 | |
577 | /* Don't report any more data than the device says is valid */ | |
578 | sdev->inquiry_len = min(try_inquiry_len, response_len); | |
579 | ||
580 | /* | |
581 | * XXX Abort if the response length is less than 36? If less than | |
582 | * 32, the lookup of the device flags (above) could be invalid, | |
583 | * and it would be possible to take an incorrect action - we do | |
584 | * not want to hang because of a short INQUIRY. On the flip side, | |
585 | * if the device is spun down or becoming ready (and so it gives a | |
586 | * short INQUIRY), an abort here prevents any further use of the | |
587 | * device, including spin up. | |
588 | * | |
589 | * Related to the above issue: | |
590 | * | |
591 | * XXX Devices (disk or all?) should be sent a TEST UNIT READY, | |
592 | * and if not ready, sent a START_STOP to start (maybe spin up) and | |
593 | * then send the INQUIRY again, since the INQUIRY can change after | |
594 | * a device is initialized. | |
595 | * | |
596 | * Ideally, start a device if explicitly asked to do so. This | |
597 | * assumes that a device is spun up on power on, spun down on | |
598 | * request, and then spun up on request. | |
599 | */ | |
600 | ||
601 | /* | |
602 | * The scanning code needs to know the scsi_level, even if no | |
603 | * device is attached at LUN 0 (SCSI_SCAN_TARGET_PRESENT) so | |
604 | * non-zero LUNs can be scanned. | |
605 | */ | |
606 | sdev->scsi_level = inq_result[2] & 0x07; | |
607 | if (sdev->scsi_level >= 2 || | |
608 | (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1)) | |
609 | sdev->scsi_level++; | |
6f3a2024 | 610 | sdev->sdev_target->scsi_level = sdev->scsi_level; |
1da177e4 | 611 | |
39216033 | 612 | return 0; |
1da177e4 LT |
613 | } |
614 | ||
615 | /** | |
f64a181d CH |
616 | * scsi_add_lun - allocate and fully initialze a scsi_device |
617 | * @sdevscan: holds information to be stored in the new scsi_device | |
618 | * @sdevnew: store the address of the newly allocated scsi_device | |
1da177e4 LT |
619 | * @inq_result: holds the result of a previous INQUIRY to the LUN |
620 | * @bflags: black/white list flag | |
621 | * | |
622 | * Description: | |
f64a181d | 623 | * Allocate and initialize a scsi_device matching sdevscan. Optionally |
1da177e4 | 624 | * set fields based on values in *@bflags. If @sdevnew is not |
f64a181d | 625 | * NULL, store the address of the new scsi_device in *@sdevnew (needed |
1da177e4 LT |
626 | * when scanning a particular LUN). |
627 | * | |
628 | * Return: | |
f64a181d CH |
629 | * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device |
630 | * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized | |
1da177e4 LT |
631 | **/ |
632 | static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) | |
633 | { | |
634 | /* | |
635 | * XXX do not save the inquiry, since it can change underneath us, | |
636 | * save just vendor/model/rev. | |
637 | * | |
638 | * Rather than save it and have an ioctl that retrieves the saved | |
639 | * value, have an ioctl that executes the same INQUIRY code used | |
640 | * in scsi_probe_lun, let user level programs doing INQUIRY | |
641 | * scanning run at their own risk, or supply a user level program | |
642 | * that can correctly scan. | |
643 | */ | |
644 | sdev->inquiry = kmalloc(sdev->inquiry_len, GFP_ATOMIC); | |
645 | if (sdev->inquiry == NULL) { | |
646 | return SCSI_SCAN_NO_RESPONSE; | |
647 | } | |
648 | ||
649 | memcpy(sdev->inquiry, inq_result, sdev->inquiry_len); | |
650 | sdev->vendor = (char *) (sdev->inquiry + 8); | |
651 | sdev->model = (char *) (sdev->inquiry + 16); | |
652 | sdev->rev = (char *) (sdev->inquiry + 32); | |
653 | ||
654 | if (*bflags & BLIST_ISROM) { | |
655 | /* | |
656 | * It would be better to modify sdev->type, and set | |
657 | * sdev->removable, but then the print_inquiry() output | |
658 | * would not show TYPE_ROM; if print_inquiry() is removed | |
659 | * the issue goes away. | |
660 | */ | |
661 | inq_result[0] = TYPE_ROM; | |
662 | inq_result[1] |= 0x80; /* removable */ | |
663 | } else if (*bflags & BLIST_NO_ULD_ATTACH) | |
664 | sdev->no_uld_attach = 1; | |
665 | ||
666 | switch (sdev->type = (inq_result[0] & 0x1f)) { | |
667 | case TYPE_TAPE: | |
668 | case TYPE_DISK: | |
669 | case TYPE_PRINTER: | |
670 | case TYPE_MOD: | |
671 | case TYPE_PROCESSOR: | |
672 | case TYPE_SCANNER: | |
673 | case TYPE_MEDIUM_CHANGER: | |
674 | case TYPE_ENCLOSURE: | |
675 | case TYPE_COMM: | |
4d7db04a | 676 | case TYPE_RAID: |
631e8a13 | 677 | case TYPE_RBC: |
1da177e4 LT |
678 | sdev->writeable = 1; |
679 | break; | |
680 | case TYPE_WORM: | |
681 | case TYPE_ROM: | |
682 | sdev->writeable = 0; | |
683 | break; | |
684 | default: | |
685 | printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type); | |
686 | } | |
687 | ||
688 | print_inquiry(inq_result); | |
689 | ||
690 | /* | |
691 | * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI | |
692 | * spec says: The device server is capable of supporting the | |
693 | * specified peripheral device type on this logical unit. However, | |
694 | * the physical device is not currently connected to this logical | |
695 | * unit. | |
696 | * | |
697 | * The above is vague, as it implies that we could treat 001 and | |
698 | * 011 the same. Stay compatible with previous code, and create a | |
f64a181d | 699 | * scsi_device for a PQ of 1 |
1da177e4 LT |
700 | * |
701 | * Don't set the device offline here; rather let the upper | |
702 | * level drivers eval the PQ to decide whether they should | |
703 | * attach. So remove ((inq_result[0] >> 5) & 7) == 1 check. | |
704 | */ | |
705 | ||
706 | sdev->inq_periph_qual = (inq_result[0] >> 5) & 7; | |
707 | sdev->removable = (0x80 & inq_result[1]) >> 7; | |
708 | sdev->lockable = sdev->removable; | |
709 | sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2); | |
710 | ||
711 | if (sdev->scsi_level >= SCSI_3 || (sdev->inquiry_len > 56 && | |
712 | inq_result[56] & 0x04)) | |
713 | sdev->ppr = 1; | |
714 | if (inq_result[7] & 0x60) | |
715 | sdev->wdtr = 1; | |
716 | if (inq_result[7] & 0x10) | |
717 | sdev->sdtr = 1; | |
718 | ||
1da177e4 | 719 | /* |
5e3c34c1 | 720 | * End sysfs code. |
1da177e4 LT |
721 | */ |
722 | ||
723 | if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) && | |
724 | !(*bflags & BLIST_NOTQ)) | |
725 | sdev->tagged_supported = 1; | |
726 | /* | |
727 | * Some devices (Texel CD ROM drives) have handshaking problems | |
728 | * when used with the Seagate controllers. borken is initialized | |
729 | * to 1, and then set it to 0 here. | |
730 | */ | |
731 | if ((*bflags & BLIST_BORKEN) == 0) | |
732 | sdev->borken = 0; | |
733 | ||
734 | /* | |
735 | * Apparently some really broken devices (contrary to the SCSI | |
736 | * standards) need to be selected without asserting ATN | |
737 | */ | |
738 | if (*bflags & BLIST_SELECT_NO_ATN) | |
739 | sdev->select_no_atn = 1; | |
740 | ||
4d7db04a JB |
741 | /* |
742 | * Maximum 512 sector transfer length | |
743 | * broken RA4x00 Compaq Disk Array | |
744 | */ | |
745 | if (*bflags & BLIST_MAX_512) | |
746 | blk_queue_max_sectors(sdev->request_queue, 512); | |
747 | ||
1da177e4 LT |
748 | /* |
749 | * Some devices may not want to have a start command automatically | |
750 | * issued when a device is added. | |
751 | */ | |
752 | if (*bflags & BLIST_NOSTARTONADD) | |
753 | sdev->no_start_on_add = 1; | |
754 | ||
755 | if (*bflags & BLIST_SINGLELUN) | |
756 | sdev->single_lun = 1; | |
757 | ||
758 | ||
759 | sdev->use_10_for_rw = 1; | |
760 | ||
761 | if (*bflags & BLIST_MS_SKIP_PAGE_08) | |
762 | sdev->skip_ms_page_8 = 1; | |
763 | ||
764 | if (*bflags & BLIST_MS_SKIP_PAGE_3F) | |
765 | sdev->skip_ms_page_3f = 1; | |
766 | ||
767 | if (*bflags & BLIST_USE_10_BYTE_MS) | |
768 | sdev->use_10_for_ms = 1; | |
769 | ||
770 | /* set the device running here so that slave configure | |
771 | * may do I/O */ | |
772 | scsi_device_set_state(sdev, SDEV_RUNNING); | |
773 | ||
774 | if (*bflags & BLIST_MS_192_BYTES_FOR_3F) | |
775 | sdev->use_192_bytes_for_3f = 1; | |
776 | ||
777 | if (*bflags & BLIST_NOT_LOCKABLE) | |
778 | sdev->lockable = 0; | |
779 | ||
780 | if (*bflags & BLIST_RETRY_HWERROR) | |
781 | sdev->retry_hwerror = 1; | |
782 | ||
783 | transport_configure_device(&sdev->sdev_gendev); | |
784 | ||
93805091 CH |
785 | if (sdev->host->hostt->slave_configure) { |
786 | int ret = sdev->host->hostt->slave_configure(sdev); | |
787 | if (ret) { | |
788 | /* | |
789 | * if LLDD reports slave not present, don't clutter | |
790 | * console with alloc failure messages | |
791 | */ | |
792 | if (ret != -ENXIO) { | |
793 | sdev_printk(KERN_ERR, sdev, | |
794 | "failed to configure device\n"); | |
795 | } | |
796 | return SCSI_SCAN_NO_RESPONSE; | |
797 | } | |
798 | } | |
1da177e4 LT |
799 | |
800 | /* | |
801 | * Ok, the device is now all set up, we can | |
802 | * register it and tell the rest of the kernel | |
803 | * about it. | |
804 | */ | |
b24b1033 AS |
805 | if (scsi_sysfs_add_sdev(sdev) != 0) |
806 | return SCSI_SCAN_NO_RESPONSE; | |
1da177e4 LT |
807 | |
808 | return SCSI_SCAN_LUN_PRESENT; | |
809 | } | |
810 | ||
6f3a2024 JB |
811 | static inline void scsi_destroy_sdev(struct scsi_device *sdev) |
812 | { | |
813 | if (sdev->host->hostt->slave_destroy) | |
814 | sdev->host->hostt->slave_destroy(sdev); | |
815 | transport_destroy_device(&sdev->sdev_gendev); | |
816 | put_device(&sdev->sdev_gendev); | |
817 | } | |
818 | ||
c5f2e640 | 819 | #ifdef CONFIG_SCSI_LOGGING |
6c7154c9 KG |
820 | /** |
821 | * scsi_inq_str - print INQUIRY data from min to max index, | |
822 | * strip trailing whitespace | |
823 | * @buf: Output buffer with at least end-first+1 bytes of space | |
824 | * @inq: Inquiry buffer (input) | |
825 | * @first: Offset of string into inq | |
826 | * @end: Index after last character in inq | |
827 | */ | |
c5f2e640 | 828 | static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq, |
6c7154c9 KG |
829 | unsigned first, unsigned end) |
830 | { | |
831 | unsigned term = 0, idx; | |
c5f2e640 | 832 | |
833 | for (idx = 0; idx + first < end && idx + first < inq[4] + 5; idx++) { | |
834 | if (inq[idx+first] > ' ') { | |
6c7154c9 KG |
835 | buf[idx] = inq[idx+first]; |
836 | term = idx+1; | |
837 | } else { | |
838 | buf[idx] = ' '; | |
839 | } | |
840 | } | |
841 | buf[term] = 0; | |
842 | return buf; | |
843 | } | |
c5f2e640 | 844 | #endif |
6f3a2024 | 845 | |
1da177e4 LT |
846 | /** |
847 | * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it | |
848 | * @starget: pointer to target device structure | |
849 | * @lun: LUN of target device | |
f64a181d CH |
850 | * @sdevscan: probe the LUN corresponding to this scsi_device |
851 | * @sdevnew: store the value of any new scsi_device allocated | |
1da177e4 LT |
852 | * @bflagsp: store bflags here if not NULL |
853 | * | |
854 | * Description: | |
855 | * Call scsi_probe_lun, if a LUN with an attached device is found, | |
856 | * allocate and set it up by calling scsi_add_lun. | |
857 | * | |
858 | * Return: | |
f64a181d | 859 | * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device |
1da177e4 LT |
860 | * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is |
861 | * attached at the LUN | |
f64a181d | 862 | * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized |
1da177e4 LT |
863 | **/ |
864 | static int scsi_probe_and_add_lun(struct scsi_target *starget, | |
865 | uint lun, int *bflagsp, | |
866 | struct scsi_device **sdevp, int rescan, | |
867 | void *hostdata) | |
868 | { | |
869 | struct scsi_device *sdev; | |
1da177e4 | 870 | unsigned char *result; |
39216033 | 871 | int bflags, res = SCSI_SCAN_NO_RESPONSE, result_len = 256; |
1da177e4 LT |
872 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
873 | ||
874 | /* | |
875 | * The rescan flag is used as an optimization, the first scan of a | |
876 | * host adapter calls into here with rescan == 0. | |
877 | */ | |
6f3a2024 JB |
878 | sdev = scsi_device_lookup_by_target(starget, lun); |
879 | if (sdev) { | |
880 | if (rescan || sdev->sdev_state != SDEV_CREATED) { | |
1da177e4 LT |
881 | SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO |
882 | "scsi scan: device exists on %s\n", | |
883 | sdev->sdev_gendev.bus_id)); | |
884 | if (sdevp) | |
885 | *sdevp = sdev; | |
886 | else | |
887 | scsi_device_put(sdev); | |
888 | ||
889 | if (bflagsp) | |
890 | *bflagsp = scsi_get_device_flags(sdev, | |
891 | sdev->vendor, | |
892 | sdev->model); | |
893 | return SCSI_SCAN_LUN_PRESENT; | |
894 | } | |
6f3a2024 JB |
895 | scsi_device_put(sdev); |
896 | } else | |
897 | sdev = scsi_alloc_sdev(starget, lun, hostdata); | |
1da177e4 LT |
898 | if (!sdev) |
899 | goto out; | |
39216033 JB |
900 | |
901 | result = kmalloc(result_len, GFP_ATOMIC | | |
bc86120a | 902 | ((shost->unchecked_isa_dma) ? __GFP_DMA : 0)); |
1da177e4 | 903 | if (!result) |
39216033 | 904 | goto out_free_sdev; |
1da177e4 | 905 | |
39216033 | 906 | if (scsi_probe_lun(sdev, result, result_len, &bflags)) |
1da177e4 LT |
907 | goto out_free_result; |
908 | ||
4186ab19 KG |
909 | if (bflagsp) |
910 | *bflagsp = bflags; | |
1da177e4 LT |
911 | /* |
912 | * result contains valid SCSI INQUIRY data. | |
913 | */ | |
13f7e5ac | 914 | if (((result[0] >> 5) == 3) && !(bflags & BLIST_ATTACH_PQ3)) { |
1da177e4 LT |
915 | /* |
916 | * For a Peripheral qualifier 3 (011b), the SCSI | |
917 | * spec says: The device server is not capable of | |
918 | * supporting a physical device on this logical | |
919 | * unit. | |
920 | * | |
921 | * For disks, this implies that there is no | |
922 | * logical disk configured at sdev->lun, but there | |
923 | * is a target id responding. | |
924 | */ | |
6c7154c9 KG |
925 | SCSI_LOG_SCAN_BUS(2, sdev_printk(KERN_INFO, sdev, "scsi scan:" |
926 | " peripheral qualifier of 3, device not" | |
927 | " added\n")) | |
928 | if (lun == 0) { | |
c5f2e640 | 929 | SCSI_LOG_SCAN_BUS(1, { |
930 | unsigned char vend[9]; | |
931 | unsigned char mod[17]; | |
932 | ||
933 | sdev_printk(KERN_INFO, sdev, | |
6c7154c9 KG |
934 | "scsi scan: consider passing scsi_mod." |
935 | "dev_flags=%s:%s:0x240 or 0x800240\n", | |
936 | scsi_inq_str(vend, result, 8, 16), | |
c5f2e640 | 937 | scsi_inq_str(mod, result, 16, 32)); |
938 | }); | |
6c7154c9 KG |
939 | } |
940 | ||
1da177e4 LT |
941 | res = SCSI_SCAN_TARGET_PRESENT; |
942 | goto out_free_result; | |
943 | } | |
944 | ||
1bfc5d9d AS |
945 | /* |
946 | * Non-standard SCSI targets may set the PDT to 0x1f (unknown or | |
947 | * no device type) instead of using the Peripheral Qualifier to | |
948 | * indicate that no LUN is present. For example, USB UFI does this. | |
949 | */ | |
950 | if (starget->pdt_1f_for_no_lun && (result[0] & 0x1f) == 0x1f) { | |
951 | SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO | |
952 | "scsi scan: peripheral device type" | |
953 | " of 31, no device added\n")); | |
954 | res = SCSI_SCAN_TARGET_PRESENT; | |
955 | goto out_free_result; | |
956 | } | |
957 | ||
1da177e4 LT |
958 | res = scsi_add_lun(sdev, result, &bflags); |
959 | if (res == SCSI_SCAN_LUN_PRESENT) { | |
960 | if (bflags & BLIST_KEY) { | |
961 | sdev->lockable = 0; | |
39216033 | 962 | scsi_unlock_floptical(sdev, result); |
1da177e4 | 963 | } |
1da177e4 LT |
964 | } |
965 | ||
966 | out_free_result: | |
967 | kfree(result); | |
1da177e4 LT |
968 | out_free_sdev: |
969 | if (res == SCSI_SCAN_LUN_PRESENT) { | |
970 | if (sdevp) { | |
b70d37bf AS |
971 | if (scsi_device_get(sdev) == 0) { |
972 | *sdevp = sdev; | |
973 | } else { | |
974 | __scsi_remove_device(sdev); | |
975 | res = SCSI_SCAN_NO_RESPONSE; | |
976 | } | |
1da177e4 | 977 | } |
6f3a2024 JB |
978 | } else |
979 | scsi_destroy_sdev(sdev); | |
1da177e4 LT |
980 | out: |
981 | return res; | |
982 | } | |
983 | ||
984 | /** | |
985 | * scsi_sequential_lun_scan - sequentially scan a SCSI target | |
986 | * @starget: pointer to target structure to scan | |
987 | * @bflags: black/white list flag for LUN 0 | |
1da177e4 LT |
988 | * |
989 | * Description: | |
990 | * Generally, scan from LUN 1 (LUN 0 is assumed to already have been | |
991 | * scanned) to some maximum lun until a LUN is found with no device | |
992 | * attached. Use the bflags to figure out any oddities. | |
993 | * | |
994 | * Modifies sdevscan->lun. | |
995 | **/ | |
996 | static void scsi_sequential_lun_scan(struct scsi_target *starget, | |
4186ab19 | 997 | int bflags, int scsi_level, int rescan) |
1da177e4 LT |
998 | { |
999 | unsigned int sparse_lun, lun, max_dev_lun; | |
1000 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | |
1001 | ||
1002 | SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: Sequential scan of" | |
1003 | "%s\n", starget->dev.bus_id)); | |
1004 | ||
1005 | max_dev_lun = min(max_scsi_luns, shost->max_lun); | |
1006 | /* | |
1007 | * If this device is known to support sparse multiple units, | |
1008 | * override the other settings, and scan all of them. Normally, | |
1009 | * SCSI-3 devices should be scanned via the REPORT LUNS. | |
1010 | */ | |
1011 | if (bflags & BLIST_SPARSELUN) { | |
1012 | max_dev_lun = shost->max_lun; | |
1013 | sparse_lun = 1; | |
1014 | } else | |
1015 | sparse_lun = 0; | |
1016 | ||
1da177e4 LT |
1017 | /* |
1018 | * If less than SCSI_1_CSS, and no special lun scaning, stop | |
1019 | * scanning; this matches 2.4 behaviour, but could just be a bug | |
1020 | * (to continue scanning a SCSI_1_CSS device). | |
1021 | * | |
1022 | * This test is broken. We might not have any device on lun0 for | |
1023 | * a sparselun device, and if that's the case then how would we | |
1024 | * know the real scsi_level, eh? It might make sense to just not | |
1025 | * scan any SCSI_1 device for non-0 luns, but that check would best | |
1026 | * go into scsi_alloc_sdev() and just have it return null when asked | |
1027 | * to alloc an sdev for lun > 0 on an already found SCSI_1 device. | |
1028 | * | |
1029 | if ((sdevscan->scsi_level < SCSI_1_CCS) && | |
1030 | ((bflags & (BLIST_FORCELUN | BLIST_SPARSELUN | BLIST_MAX5LUN)) | |
1031 | == 0)) | |
1032 | return; | |
1033 | */ | |
1034 | /* | |
1035 | * If this device is known to support multiple units, override | |
1036 | * the other settings, and scan all of them. | |
1037 | */ | |
1038 | if (bflags & BLIST_FORCELUN) | |
1039 | max_dev_lun = shost->max_lun; | |
1040 | /* | |
1041 | * REGAL CDC-4X: avoid hang after LUN 4 | |
1042 | */ | |
1043 | if (bflags & BLIST_MAX5LUN) | |
1044 | max_dev_lun = min(5U, max_dev_lun); | |
1045 | /* | |
1046 | * Do not scan SCSI-2 or lower device past LUN 7, unless | |
1047 | * BLIST_LARGELUN. | |
1048 | */ | |
1049 | if (scsi_level < SCSI_3 && !(bflags & BLIST_LARGELUN)) | |
1050 | max_dev_lun = min(8U, max_dev_lun); | |
1051 | ||
1052 | /* | |
1053 | * We have already scanned LUN 0, so start at LUN 1. Keep scanning | |
1054 | * until we reach the max, or no LUN is found and we are not | |
1055 | * sparse_lun. | |
1056 | */ | |
1057 | for (lun = 1; lun < max_dev_lun; ++lun) | |
1058 | if ((scsi_probe_and_add_lun(starget, lun, NULL, NULL, rescan, | |
1059 | NULL) != SCSI_SCAN_LUN_PRESENT) && | |
1060 | !sparse_lun) | |
1061 | return; | |
1062 | } | |
1063 | ||
1064 | /** | |
1065 | * scsilun_to_int: convert a scsi_lun to an int | |
1066 | * @scsilun: struct scsi_lun to be converted. | |
1067 | * | |
1068 | * Description: | |
1069 | * Convert @scsilun from a struct scsi_lun to a four byte host byte-ordered | |
1070 | * integer, and return the result. The caller must check for | |
1071 | * truncation before using this function. | |
1072 | * | |
1073 | * Notes: | |
1074 | * The struct scsi_lun is assumed to be four levels, with each level | |
1075 | * effectively containing a SCSI byte-ordered (big endian) short; the | |
1076 | * addressing bits of each level are ignored (the highest two bits). | |
1077 | * For a description of the LUN format, post SCSI-3 see the SCSI | |
1078 | * Architecture Model, for SCSI-3 see the SCSI Controller Commands. | |
1079 | * | |
1080 | * Given a struct scsi_lun of: 0a 04 0b 03 00 00 00 00, this function returns | |
1081 | * the integer: 0x0b030a04 | |
1082 | **/ | |
1083 | static int scsilun_to_int(struct scsi_lun *scsilun) | |
1084 | { | |
1085 | int i; | |
1086 | unsigned int lun; | |
1087 | ||
1088 | lun = 0; | |
1089 | for (i = 0; i < sizeof(lun); i += 2) | |
1090 | lun = lun | (((scsilun->scsi_lun[i] << 8) | | |
1091 | scsilun->scsi_lun[i + 1]) << (i * 8)); | |
1092 | return lun; | |
1093 | } | |
1094 | ||
2f4701d8 JSEC |
1095 | /** |
1096 | * int_to_scsilun: reverts an int into a scsi_lun | |
1097 | * @int: integer to be reverted | |
1098 | * @scsilun: struct scsi_lun to be set. | |
1099 | * | |
1100 | * Description: | |
1101 | * Reverts the functionality of the scsilun_to_int, which packed | |
1102 | * an 8-byte lun value into an int. This routine unpacks the int | |
1103 | * back into the lun value. | |
1104 | * Note: the scsilun_to_int() routine does not truly handle all | |
1105 | * 8bytes of the lun value. This functions restores only as much | |
1106 | * as was set by the routine. | |
1107 | * | |
1108 | * Notes: | |
1109 | * Given an integer : 0x0b030a04, this function returns a | |
1110 | * scsi_lun of : struct scsi_lun of: 0a 04 0b 03 00 00 00 00 | |
1111 | * | |
1112 | **/ | |
1113 | void int_to_scsilun(unsigned int lun, struct scsi_lun *scsilun) | |
1114 | { | |
1115 | int i; | |
1116 | ||
1117 | memset(scsilun->scsi_lun, 0, sizeof(scsilun->scsi_lun)); | |
1118 | ||
1119 | for (i = 0; i < sizeof(lun); i += 2) { | |
1120 | scsilun->scsi_lun[i] = (lun >> 8) & 0xFF; | |
1121 | scsilun->scsi_lun[i+1] = lun & 0xFF; | |
1122 | lun = lun >> 16; | |
1123 | } | |
1124 | } | |
1125 | EXPORT_SYMBOL(int_to_scsilun); | |
1126 | ||
1da177e4 LT |
1127 | /** |
1128 | * scsi_report_lun_scan - Scan using SCSI REPORT LUN results | |
f64a181d | 1129 | * @sdevscan: scan the host, channel, and id of this scsi_device |
1da177e4 LT |
1130 | * |
1131 | * Description: | |
1132 | * If @sdevscan is for a SCSI-3 or up device, send a REPORT LUN | |
1133 | * command, and scan the resulting list of LUNs by calling | |
1134 | * scsi_probe_and_add_lun. | |
1135 | * | |
1136 | * Modifies sdevscan->lun. | |
1137 | * | |
1138 | * Return: | |
1139 | * 0: scan completed (or no memory, so further scanning is futile) | |
1140 | * 1: no report lun scan, or not configured | |
1141 | **/ | |
6f3a2024 | 1142 | static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, |
1da177e4 LT |
1143 | int rescan) |
1144 | { | |
1145 | char devname[64]; | |
1146 | unsigned char scsi_cmd[MAX_COMMAND_SIZE]; | |
1147 | unsigned int length; | |
1148 | unsigned int lun; | |
1149 | unsigned int num_luns; | |
1150 | unsigned int retries; | |
39216033 | 1151 | int result; |
1da177e4 | 1152 | struct scsi_lun *lunp, *lun_data; |
1da177e4 LT |
1153 | u8 *data; |
1154 | struct scsi_sense_hdr sshdr; | |
6f3a2024 JB |
1155 | struct scsi_device *sdev; |
1156 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
2ef89198 | 1157 | int ret = 0; |
1da177e4 LT |
1158 | |
1159 | /* | |
1160 | * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set. | |
1161 | * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does | |
1162 | * support more than 8 LUNs. | |
1163 | */ | |
4d7db04a JB |
1164 | if (bflags & BLIST_NOREPORTLUN) |
1165 | return 1; | |
1166 | if (starget->scsi_level < SCSI_2 && | |
1167 | starget->scsi_level != SCSI_UNKNOWN) | |
1168 | return 1; | |
1169 | if (starget->scsi_level < SCSI_3 && | |
1170 | (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) | |
1da177e4 LT |
1171 | return 1; |
1172 | if (bflags & BLIST_NOLUN) | |
1173 | return 0; | |
1174 | ||
6f3a2024 JB |
1175 | if (!(sdev = scsi_device_lookup_by_target(starget, 0))) { |
1176 | sdev = scsi_alloc_sdev(starget, 0, NULL); | |
1177 | if (!sdev) | |
1178 | return 0; | |
1179 | if (scsi_device_get(sdev)) | |
1180 | return 0; | |
1181 | } | |
1182 | ||
1da177e4 | 1183 | sprintf(devname, "host %d channel %d id %d", |
6f3a2024 | 1184 | shost->host_no, sdev->channel, sdev->id); |
1da177e4 LT |
1185 | |
1186 | /* | |
1187 | * Allocate enough to hold the header (the same size as one scsi_lun) | |
1188 | * plus the max number of luns we are requesting. | |
1189 | * | |
1190 | * Reallocating and trying again (with the exact amount we need) | |
1191 | * would be nice, but then we need to somehow limit the size | |
1192 | * allocated based on the available memory and the limits of | |
1193 | * kmalloc - we don't want a kmalloc() failure of a huge value to | |
1194 | * prevent us from finding any LUNs on this target. | |
1195 | */ | |
1196 | length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun); | |
1197 | lun_data = kmalloc(length, GFP_ATOMIC | | |
1198 | (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0)); | |
6f3a2024 JB |
1199 | if (!lun_data) { |
1200 | printk(ALLOC_FAILURE_MSG, __FUNCTION__); | |
39216033 | 1201 | goto out; |
6f3a2024 | 1202 | } |
1da177e4 LT |
1203 | |
1204 | scsi_cmd[0] = REPORT_LUNS; | |
1205 | ||
1206 | /* | |
1207 | * bytes 1 - 5: reserved, set to zero. | |
1208 | */ | |
1209 | memset(&scsi_cmd[1], 0, 5); | |
1210 | ||
1211 | /* | |
1212 | * bytes 6 - 9: length of the command. | |
1213 | */ | |
1214 | scsi_cmd[6] = (unsigned char) (length >> 24) & 0xff; | |
1215 | scsi_cmd[7] = (unsigned char) (length >> 16) & 0xff; | |
1216 | scsi_cmd[8] = (unsigned char) (length >> 8) & 0xff; | |
1217 | scsi_cmd[9] = (unsigned char) length & 0xff; | |
1218 | ||
1219 | scsi_cmd[10] = 0; /* reserved */ | |
1220 | scsi_cmd[11] = 0; /* control */ | |
1da177e4 LT |
1221 | |
1222 | /* | |
1223 | * We can get a UNIT ATTENTION, for example a power on/reset, so | |
1224 | * retry a few times (like sd.c does for TEST UNIT READY). | |
1225 | * Experience shows some combinations of adapter/devices get at | |
1226 | * least two power on/resets. | |
1227 | * | |
1228 | * Illegal requests (for devices that do not support REPORT LUNS) | |
1229 | * should come through as a check condition, and will not generate | |
1230 | * a retry. | |
1231 | */ | |
1232 | for (retries = 0; retries < 3; retries++) { | |
1233 | SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: Sending" | |
1234 | " REPORT LUNS to %s (try %d)\n", devname, | |
1235 | retries)); | |
39216033 | 1236 | |
39216033 | 1237 | result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, |
ea73a9f2 | 1238 | lun_data, length, &sshdr, |
39216033 JB |
1239 | SCSI_TIMEOUT + 4 * HZ, 3); |
1240 | ||
1da177e4 | 1241 | SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS" |
39216033 JB |
1242 | " %s (try %d) result 0x%x\n", result |
1243 | ? "failed" : "successful", retries, result)); | |
1244 | if (result == 0) | |
1da177e4 | 1245 | break; |
ea73a9f2 | 1246 | else if (scsi_sense_valid(&sshdr)) { |
1da177e4 LT |
1247 | if (sshdr.sense_key != UNIT_ATTENTION) |
1248 | break; | |
1249 | } | |
1250 | } | |
1251 | ||
39216033 | 1252 | if (result) { |
1da177e4 LT |
1253 | /* |
1254 | * The device probably does not support a REPORT LUN command | |
1255 | */ | |
2ef89198 AS |
1256 | ret = 1; |
1257 | goto out_err; | |
1da177e4 | 1258 | } |
1da177e4 LT |
1259 | |
1260 | /* | |
1261 | * Get the length from the first four bytes of lun_data. | |
1262 | */ | |
1263 | data = (u8 *) lun_data->scsi_lun; | |
1264 | length = ((data[0] << 24) | (data[1] << 16) | | |
1265 | (data[2] << 8) | (data[3] << 0)); | |
1266 | ||
1267 | num_luns = (length / sizeof(struct scsi_lun)); | |
1268 | if (num_luns > max_scsi_report_luns) { | |
1269 | printk(KERN_WARNING "scsi: On %s only %d (max_scsi_report_luns)" | |
1270 | " of %d luns reported, try increasing" | |
1271 | " max_scsi_report_luns.\n", devname, | |
1272 | max_scsi_report_luns, num_luns); | |
1273 | num_luns = max_scsi_report_luns; | |
1274 | } | |
1275 | ||
3bf743e7 JG |
1276 | SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev, |
1277 | "scsi scan: REPORT LUN scan\n")); | |
1da177e4 LT |
1278 | |
1279 | /* | |
1280 | * Scan the luns in lun_data. The entry at offset 0 is really | |
1281 | * the header, so start at 1 and go up to and including num_luns. | |
1282 | */ | |
1283 | for (lunp = &lun_data[1]; lunp <= &lun_data[num_luns]; lunp++) { | |
1284 | lun = scsilun_to_int(lunp); | |
1285 | ||
1286 | /* | |
1287 | * Check if the unused part of lunp is non-zero, and so | |
1288 | * does not fit in lun. | |
1289 | */ | |
1290 | if (memcmp(&lunp->scsi_lun[sizeof(lun)], "\0\0\0\0", 4)) { | |
1291 | int i; | |
1292 | ||
1293 | /* | |
1294 | * Output an error displaying the LUN in byte order, | |
1295 | * this differs from what linux would print for the | |
1296 | * integer LUN value. | |
1297 | */ | |
1298 | printk(KERN_WARNING "scsi: %s lun 0x", devname); | |
1299 | data = (char *)lunp->scsi_lun; | |
1300 | for (i = 0; i < sizeof(struct scsi_lun); i++) | |
1301 | printk("%02x", data[i]); | |
1302 | printk(" has a LUN larger than currently supported.\n"); | |
1da177e4 LT |
1303 | } else if (lun > sdev->host->max_lun) { |
1304 | printk(KERN_WARNING "scsi: %s lun%d has a LUN larger" | |
1305 | " than allowed by the host adapter\n", | |
1306 | devname, lun); | |
1307 | } else { | |
1308 | int res; | |
1309 | ||
1310 | res = scsi_probe_and_add_lun(starget, | |
1311 | lun, NULL, NULL, rescan, NULL); | |
1312 | if (res == SCSI_SCAN_NO_RESPONSE) { | |
1313 | /* | |
1314 | * Got some results, but now none, abort. | |
1315 | */ | |
3bf743e7 JG |
1316 | sdev_printk(KERN_ERR, sdev, |
1317 | "Unexpected response" | |
1318 | " from lun %d while scanning, scan" | |
1319 | " aborted\n", lun); | |
1da177e4 LT |
1320 | break; |
1321 | } | |
1322 | } | |
1323 | } | |
1324 | ||
2ef89198 | 1325 | out_err: |
1da177e4 | 1326 | kfree(lun_data); |
1da177e4 | 1327 | out: |
6f3a2024 JB |
1328 | scsi_device_put(sdev); |
1329 | if (sdev->sdev_state == SDEV_CREATED) | |
1330 | /* | |
1331 | * the sdev we used didn't appear in the report luns scan | |
1332 | */ | |
1333 | scsi_destroy_sdev(sdev); | |
2ef89198 | 1334 | return ret; |
1da177e4 LT |
1335 | } |
1336 | ||
1337 | struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, | |
1338 | uint id, uint lun, void *hostdata) | |
1339 | { | |
a97a83a0 | 1340 | struct scsi_device *sdev = ERR_PTR(-ENODEV); |
1da177e4 | 1341 | struct device *parent = &shost->shost_gendev; |
e02f3f59 | 1342 | struct scsi_target *starget; |
1da177e4 | 1343 | |
e02f3f59 | 1344 | starget = scsi_alloc_target(parent, channel, id); |
1da177e4 LT |
1345 | if (!starget) |
1346 | return ERR_PTR(-ENOMEM); | |
1347 | ||
c92715b3 | 1348 | get_device(&starget->dev); |
0b950672 | 1349 | mutex_lock(&shost->scan_mutex); |
a97a83a0 MW |
1350 | if (scsi_host_scan_allowed(shost)) |
1351 | scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); | |
0b950672 | 1352 | mutex_unlock(&shost->scan_mutex); |
1da177e4 LT |
1353 | scsi_target_reap(starget); |
1354 | put_device(&starget->dev); | |
1355 | ||
1356 | return sdev; | |
1357 | } | |
1358 | EXPORT_SYMBOL(__scsi_add_device); | |
1359 | ||
146f7262 JB |
1360 | int scsi_add_device(struct Scsi_Host *host, uint channel, |
1361 | uint target, uint lun) | |
1362 | { | |
1363 | struct scsi_device *sdev = | |
1364 | __scsi_add_device(host, channel, target, lun, NULL); | |
1365 | if (IS_ERR(sdev)) | |
1366 | return PTR_ERR(sdev); | |
1367 | ||
1368 | scsi_device_put(sdev); | |
1369 | return 0; | |
1370 | } | |
1371 | EXPORT_SYMBOL(scsi_add_device); | |
1372 | ||
1da177e4 LT |
1373 | void scsi_rescan_device(struct device *dev) |
1374 | { | |
1375 | struct scsi_driver *drv; | |
1376 | ||
1377 | if (!dev->driver) | |
1378 | return; | |
1379 | ||
1380 | drv = to_scsi_driver(dev->driver); | |
1381 | if (try_module_get(drv->owner)) { | |
1382 | if (drv->rescan) | |
1383 | drv->rescan(dev); | |
1384 | module_put(drv->owner); | |
1385 | } | |
1386 | } | |
1387 | EXPORT_SYMBOL(scsi_rescan_device); | |
1388 | ||
e517d313 AS |
1389 | static void __scsi_scan_target(struct device *parent, unsigned int channel, |
1390 | unsigned int id, unsigned int lun, int rescan) | |
1da177e4 LT |
1391 | { |
1392 | struct Scsi_Host *shost = dev_to_shost(parent); | |
1393 | int bflags = 0; | |
1394 | int res; | |
1da177e4 LT |
1395 | struct scsi_target *starget; |
1396 | ||
1397 | if (shost->this_id == id) | |
1398 | /* | |
1399 | * Don't scan the host adapter | |
1400 | */ | |
1401 | return; | |
1402 | ||
1da177e4 | 1403 | starget = scsi_alloc_target(parent, channel, id); |
1da177e4 LT |
1404 | if (!starget) |
1405 | return; | |
1406 | ||
1407 | get_device(&starget->dev); | |
1408 | if (lun != SCAN_WILD_CARD) { | |
1409 | /* | |
1410 | * Scan for a specific host/chan/id/lun. | |
1411 | */ | |
1412 | scsi_probe_and_add_lun(starget, lun, NULL, NULL, rescan, NULL); | |
1413 | goto out_reap; | |
1414 | } | |
1415 | ||
1416 | /* | |
1417 | * Scan LUN 0, if there is some response, scan further. Ideally, we | |
1418 | * would not configure LUN 0 until all LUNs are scanned. | |
1419 | */ | |
6f3a2024 JB |
1420 | res = scsi_probe_and_add_lun(starget, 0, &bflags, NULL, rescan, NULL); |
1421 | if (res == SCSI_SCAN_LUN_PRESENT || res == SCSI_SCAN_TARGET_PRESENT) { | |
1422 | if (scsi_report_lun_scan(starget, bflags, rescan) != 0) | |
1da177e4 LT |
1423 | /* |
1424 | * The REPORT LUN did not scan the target, | |
1425 | * do a sequential scan. | |
1426 | */ | |
1427 | scsi_sequential_lun_scan(starget, bflags, | |
4186ab19 | 1428 | starget->scsi_level, rescan); |
1da177e4 | 1429 | } |
1da177e4 LT |
1430 | |
1431 | out_reap: | |
1432 | /* now determine if the target has any children at all | |
1433 | * and if not, nuke it */ | |
1434 | scsi_target_reap(starget); | |
1435 | ||
1436 | put_device(&starget->dev); | |
1437 | } | |
e517d313 AS |
1438 | |
1439 | /** | |
1440 | * scsi_scan_target - scan a target id, possibly including all LUNs on the | |
1441 | * target. | |
1442 | * @parent: host to scan | |
1443 | * @channel: channel to scan | |
1444 | * @id: target id to scan | |
1445 | * @lun: Specific LUN to scan or SCAN_WILD_CARD | |
1446 | * @rescan: passed to LUN scanning routines | |
1447 | * | |
1448 | * Description: | |
1449 | * Scan the target id on @parent, @channel, and @id. Scan at least LUN 0, | |
1450 | * and possibly all LUNs on the target id. | |
1451 | * | |
1452 | * First try a REPORT LUN scan, if that does not scan the target, do a | |
1453 | * sequential scan of LUNs on the target id. | |
1454 | **/ | |
1455 | void scsi_scan_target(struct device *parent, unsigned int channel, | |
1456 | unsigned int id, unsigned int lun, int rescan) | |
1457 | { | |
1458 | struct Scsi_Host *shost = dev_to_shost(parent); | |
1459 | ||
0b950672 | 1460 | mutex_lock(&shost->scan_mutex); |
e517d313 AS |
1461 | if (scsi_host_scan_allowed(shost)) |
1462 | __scsi_scan_target(parent, channel, id, lun, rescan); | |
0b950672 | 1463 | mutex_unlock(&shost->scan_mutex); |
e517d313 | 1464 | } |
1da177e4 LT |
1465 | EXPORT_SYMBOL(scsi_scan_target); |
1466 | ||
1467 | static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel, | |
1468 | unsigned int id, unsigned int lun, int rescan) | |
1469 | { | |
1470 | uint order_id; | |
1471 | ||
1472 | if (id == SCAN_WILD_CARD) | |
1473 | for (id = 0; id < shost->max_id; ++id) { | |
1474 | /* | |
1475 | * XXX adapter drivers when possible (FCP, iSCSI) | |
1476 | * could modify max_id to match the current max, | |
1477 | * not the absolute max. | |
1478 | * | |
1479 | * XXX add a shost id iterator, so for example, | |
1480 | * the FC ID can be the same as a target id | |
1481 | * without a huge overhead of sparse id's. | |
1482 | */ | |
1483 | if (shost->reverse_ordering) | |
1484 | /* | |
1485 | * Scan from high to low id. | |
1486 | */ | |
1487 | order_id = shost->max_id - id - 1; | |
1488 | else | |
1489 | order_id = id; | |
e517d313 AS |
1490 | __scsi_scan_target(&shost->shost_gendev, channel, |
1491 | order_id, lun, rescan); | |
1da177e4 LT |
1492 | } |
1493 | else | |
e517d313 AS |
1494 | __scsi_scan_target(&shost->shost_gendev, channel, |
1495 | id, lun, rescan); | |
1da177e4 LT |
1496 | } |
1497 | ||
1498 | int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel, | |
1499 | unsigned int id, unsigned int lun, int rescan) | |
1500 | { | |
3bf743e7 JG |
1501 | SCSI_LOG_SCAN_BUS(3, shost_printk (KERN_INFO, shost, |
1502 | "%s: <%u:%u:%u>\n", | |
1503 | __FUNCTION__, channel, id, lun)); | |
1da177e4 LT |
1504 | |
1505 | if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) || | |
091686d3 | 1506 | ((id != SCAN_WILD_CARD) && (id >= shost->max_id)) || |
1da177e4 LT |
1507 | ((lun != SCAN_WILD_CARD) && (lun > shost->max_lun))) |
1508 | return -EINVAL; | |
1509 | ||
0b950672 | 1510 | mutex_lock(&shost->scan_mutex); |
82f29467 MA |
1511 | if (scsi_host_scan_allowed(shost)) { |
1512 | if (channel == SCAN_WILD_CARD) | |
1513 | for (channel = 0; channel <= shost->max_channel; | |
1514 | channel++) | |
1515 | scsi_scan_channel(shost, channel, id, lun, | |
1516 | rescan); | |
1517 | else | |
1da177e4 | 1518 | scsi_scan_channel(shost, channel, id, lun, rescan); |
82f29467 | 1519 | } |
0b950672 | 1520 | mutex_unlock(&shost->scan_mutex); |
1da177e4 LT |
1521 | |
1522 | return 0; | |
1523 | } | |
1524 | ||
1525 | /** | |
1526 | * scsi_scan_host - scan the given adapter | |
1527 | * @shost: adapter to scan | |
1528 | **/ | |
1529 | void scsi_scan_host(struct Scsi_Host *shost) | |
1530 | { | |
1531 | scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD, | |
1532 | SCAN_WILD_CARD, 0); | |
1533 | } | |
1534 | EXPORT_SYMBOL(scsi_scan_host); | |
1535 | ||
1da177e4 LT |
1536 | void scsi_forget_host(struct Scsi_Host *shost) |
1537 | { | |
a64358db | 1538 | struct scsi_device *sdev; |
1da177e4 LT |
1539 | unsigned long flags; |
1540 | ||
a64358db | 1541 | restart: |
1da177e4 | 1542 | spin_lock_irqsave(shost->host_lock, flags); |
a64358db AS |
1543 | list_for_each_entry(sdev, &shost->__devices, siblings) { |
1544 | if (sdev->sdev_state == SDEV_DEL) | |
1545 | continue; | |
1da177e4 | 1546 | spin_unlock_irqrestore(shost->host_lock, flags); |
a64358db AS |
1547 | __scsi_remove_device(sdev); |
1548 | goto restart; | |
1da177e4 LT |
1549 | } |
1550 | spin_unlock_irqrestore(shost->host_lock, flags); | |
1551 | } | |
1552 | ||
1553 | /* | |
1554 | * Function: scsi_get_host_dev() | |
1555 | * | |
f64a181d | 1556 | * Purpose: Create a scsi_device that points to the host adapter itself. |
1da177e4 | 1557 | * |
f64a181d | 1558 | * Arguments: SHpnt - Host that needs a scsi_device |
1da177e4 LT |
1559 | * |
1560 | * Lock status: None assumed. | |
1561 | * | |
f64a181d | 1562 | * Returns: The scsi_device or NULL |
1da177e4 LT |
1563 | * |
1564 | * Notes: | |
f64a181d | 1565 | * Attach a single scsi_device to the Scsi_Host - this should |
1da177e4 LT |
1566 | * be made to look like a "pseudo-device" that points to the |
1567 | * HA itself. | |
1568 | * | |
1569 | * Note - this device is not accessible from any high-level | |
1570 | * drivers (including generics), which is probably not | |
1571 | * optimal. We can add hooks later to attach | |
1572 | */ | |
1573 | struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost) | |
1574 | { | |
e517d313 | 1575 | struct scsi_device *sdev = NULL; |
1da177e4 LT |
1576 | struct scsi_target *starget; |
1577 | ||
0b950672 | 1578 | mutex_lock(&shost->scan_mutex); |
e517d313 AS |
1579 | if (!scsi_host_scan_allowed(shost)) |
1580 | goto out; | |
1da177e4 LT |
1581 | starget = scsi_alloc_target(&shost->shost_gendev, 0, shost->this_id); |
1582 | if (!starget) | |
e517d313 | 1583 | goto out; |
1da177e4 LT |
1584 | |
1585 | sdev = scsi_alloc_sdev(starget, 0, NULL); | |
1586 | if (sdev) { | |
1587 | sdev->sdev_gendev.parent = get_device(&starget->dev); | |
1588 | sdev->borken = 0; | |
1589 | } | |
1590 | put_device(&starget->dev); | |
e517d313 | 1591 | out: |
0b950672 | 1592 | mutex_unlock(&shost->scan_mutex); |
1da177e4 LT |
1593 | return sdev; |
1594 | } | |
1595 | EXPORT_SYMBOL(scsi_get_host_dev); | |
1596 | ||
1597 | /* | |
1598 | * Function: scsi_free_host_dev() | |
1599 | * | |
1600 | * Purpose: Free a scsi_device that points to the host adapter itself. | |
1601 | * | |
f64a181d | 1602 | * Arguments: SHpnt - Host that needs a scsi_device |
1da177e4 LT |
1603 | * |
1604 | * Lock status: None assumed. | |
1605 | * | |
1606 | * Returns: Nothing | |
1607 | * | |
1608 | * Notes: | |
1609 | */ | |
1610 | void scsi_free_host_dev(struct scsi_device *sdev) | |
1611 | { | |
1612 | BUG_ON(sdev->id != sdev->host->this_id); | |
1613 | ||
6f3a2024 | 1614 | scsi_destroy_sdev(sdev); |
1da177e4 LT |
1615 | } |
1616 | EXPORT_SYMBOL(scsi_free_host_dev); | |
1617 |