[linux-2.6-block.git] / drivers / scsi / scsi_ioctl.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Changes:
 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 08/23/2000
 * - get rid of some verify_areas and use __copy*user and __get/put_user
 *   for the ones that remain
 */
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/uaccess.h>

#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/sg.h>
#include <scsi/scsi_dbg.h>

#include "scsi_logging.h"

#define NORMAL_RETRIES			5
#define IOCTL_NORMAL_TIMEOUT			(10 * HZ)

#define MAX_BUF PAGE_SIZE

/**
 * ioctl_probe  --  return host identification
 * @host:	host to identify
 * @buffer:	userspace buffer for identification
 *
 * Return an identifying string at @buffer, if @buffer is non-NULL, filling
 * to the length stored at * (int *) @buffer.
 */
static int ioctl_probe(struct Scsi_Host *host, void __user *buffer)
{
	unsigned int len, slen;
	const char *string;

	if (buffer) {
		if (get_user(len, (unsigned int __user *) buffer))
			return -EFAULT;

		if (host->hostt->info)
			string = host->hostt->info(host);
		else
			string = host->hostt->name;
		if (string) {
			slen = strlen(string);
			if (len > slen)
				len = slen + 1;
			if (copy_to_user(buffer, string, len))
				return -EFAULT;
		}
	}
	return 1;
}

/*

 * The SCSI_IOCTL_SEND_COMMAND ioctl sends a command out to the SCSI host.
 * The IOCTL_NORMAL_TIMEOUT and NORMAL_RETRIES  variables are used.  
 * 
 * dev is the SCSI device struct ptr, *(int *) arg is the length of the
 * input data, if any, not including the command string & counts, 
 * *((int *)arg + 1) is the output buffer size in bytes.
 * 
 * *(char *) ((int *) arg)[2] the actual command byte.   
 * 
 * Note that if more than MAX_BUF bytes are requested to be transferred,
 * the ioctl will fail with error EINVAL.
 * 
 * This size *does not* include the initial lengths that were passed.
 * 
 * The SCSI command is read from the memory location immediately after the
 * length words, and the input data is right after the command.  The SCSI
 * routines know the command size based on the opcode decode.  
 * 
 * The output area is then filled in starting from the command byte. 
 */

static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
				  int timeout, int retries)
{
	int result;
	struct scsi_sense_hdr sshdr;

	SCSI_LOG_IOCTL(1, sdev_printk(KERN_INFO, sdev,
				      "Trying ioctl with scsi command %d\n", *cmd));

	result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
				  &sshdr, timeout, retries, NULL);

	SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
				      "Ioctl returned  0x%x\n", result));

	if (driver_byte(result) == DRIVER_SENSE &&
	    scsi_sense_valid(&sshdr)) {
		switch (sshdr.sense_key) {
		case ILLEGAL_REQUEST:
			if (cmd[0] == ALLOW_MEDIUM_REMOVAL)
				sdev->lockable = 0;
			else
				sdev_printk(KERN_INFO, sdev,
					    "ioctl_internal_command: "
					    "ILLEGAL REQUEST "
					    "asc=0x%x ascq=0x%x\n",
					    sshdr.asc, sshdr.ascq);
			break;
		case NOT_READY:	/* This happens if there is no disc in drive */
			if (sdev->removable)
				break;
			fallthrough;
		case UNIT_ATTENTION:
			if (sdev->removable) {
				sdev->changed = 1;
				result = 0;	/* This is no longer considered an error */
				break;
			}
			fallthrough;	/* for non-removable media */
		default:
			sdev_printk(KERN_INFO, sdev,
				    "ioctl_internal_command return code = %x\n",
				    result);
			scsi_print_sense_hdr(sdev, NULL, &sshdr);
			break;
		}
	}

	SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
				      "IOCTL Releasing command\n"));
	return result;
}

int scsi_set_medium_removal(struct scsi_device *sdev, char state)
{
	char scsi_cmd[MAX_COMMAND_SIZE];
	int ret;

	if (!sdev->removable || !sdev->lockable)
	       return 0;

	scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
	scsi_cmd[1] = 0;
	scsi_cmd[2] = 0;
	scsi_cmd[3] = 0;
	scsi_cmd[4] = state;
	scsi_cmd[5] = 0;

	ret = ioctl_internal_command(sdev, scsi_cmd,
			IOCTL_NORMAL_TIMEOUT, NORMAL_RETRIES);
	if (ret == 0)
		sdev->locked = (state == SCSI_REMOVAL_PREVENT);
	return ret;
}
EXPORT_SYMBOL(scsi_set_medium_removal);

/*
 * The scsi_ioctl_get_pci() function places into arg the value
 * pci_dev::slot_name (8 characters) for the PCI device (if any).
 * Returns: 0 on success
 *          -ENXIO if there isn't a PCI device pointer
 *                 (could be because the SCSI driver hasn't been
 *                  updated yet, or because it isn't a SCSI
 *                  device)
 *          any copy_to_user() error on failure there
 */
static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg)
{
	struct device *dev = scsi_get_device(sdev->host);
	const char *name;

        if (!dev)
		return -ENXIO;

	name = dev_name(dev);

	/* compatibility with old ioctl which only returned
	 * 20 characters */
        return copy_to_user(arg, name, min(strlen(name), (size_t)20))
		? -EFAULT: 0;
}


static int scsi_ioctl_common(struct scsi_device *sdev, int cmd, void __user *arg)
{
	char scsi_cmd[MAX_COMMAND_SIZE];
	struct scsi_sense_hdr sense_hdr;

	/* Check for deprecated ioctls ... all the ioctls which don't
	 * follow the new unique numbering scheme are deprecated */
	switch (cmd) {
	case SCSI_IOCTL_SEND_COMMAND:
	case SCSI_IOCTL_TEST_UNIT_READY:
	case SCSI_IOCTL_BENCHMARK_COMMAND:
	case SCSI_IOCTL_SYNC:
	case SCSI_IOCTL_START_UNIT:
	case SCSI_IOCTL_STOP_UNIT:
		printk(KERN_WARNING "program %s is using a deprecated SCSI "
		       "ioctl, please convert it to SG_IO\n", current->comm);
		break;
	default:
		break;
	}

	switch (cmd) {
	case SCSI_IOCTL_GET_IDLUN: {
		struct scsi_idlun v = {
			.dev_id = (sdev->id & 0xff)
				 + ((sdev->lun & 0xff) << 8)
				 + ((sdev->channel & 0xff) << 16)
				 + ((sdev->host->host_no & 0xff) << 24),
			.host_unique_id = sdev->host->unique_id
		};
		if (copy_to_user(arg, &v, sizeof(struct scsi_idlun)))
			return -EFAULT;
		return 0;
	}
	case SCSI_IOCTL_GET_BUS_NUMBER:
		return put_user(sdev->host->host_no, (int __user *)arg);
	case SCSI_IOCTL_PROBE_HOST:
		return ioctl_probe(sdev->host, arg);
	case SCSI_IOCTL_SEND_COMMAND:
		if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
			return -EACCES;
		return sg_scsi_ioctl(sdev->request_queue, NULL, 0, arg);
	case SCSI_IOCTL_DOORLOCK:
		return scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
	case SCSI_IOCTL_DOORUNLOCK:
		return scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
	case SCSI_IOCTL_TEST_UNIT_READY:
		return scsi_test_unit_ready(sdev, IOCTL_NORMAL_TIMEOUT,
					    NORMAL_RETRIES, &sense_hdr);
	case SCSI_IOCTL_START_UNIT:
		scsi_cmd[0] = START_STOP;
		scsi_cmd[1] = 0;
		scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
		scsi_cmd[4] = 1;
		return ioctl_internal_command(sdev, scsi_cmd,
				     START_STOP_TIMEOUT, NORMAL_RETRIES);
	case SCSI_IOCTL_STOP_UNIT:
		scsi_cmd[0] = START_STOP;
		scsi_cmd[1] = 0;
		scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
		scsi_cmd[4] = 0;
		return ioctl_internal_command(sdev, scsi_cmd,
				     START_STOP_TIMEOUT, NORMAL_RETRIES);
        case SCSI_IOCTL_GET_PCI:
                return scsi_ioctl_get_pci(sdev, arg);
	case SG_SCSI_RESET:
		return scsi_ioctl_reset(sdev, arg);
	}
	return -ENOIOCTLCMD;
}

/**
 * scsi_ioctl - Dispatch ioctl to scsi device
 * @sdev: scsi device receiving ioctl
 * @cmd: which ioctl is it
 * @arg: data associated with ioctl
 *
 * Description: The scsi_ioctl() function differs from most ioctls in that it
 * does not take a major/minor number as the dev field.  Rather, it takes
 * a pointer to a &struct scsi_device.
 */
int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
	int ret = scsi_ioctl_common(sdev, cmd, arg);

	if (ret != -ENOIOCTLCMD)
		return ret;

	if (sdev->host->hostt->ioctl)
		return sdev->host->hostt->ioctl(sdev, cmd, arg);

	return -EINVAL;
}
EXPORT_SYMBOL(scsi_ioctl);

#ifdef CONFIG_COMPAT
int scsi_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
	int ret = scsi_ioctl_common(sdev, cmd, arg);

	if (ret != -ENOIOCTLCMD)
		return ret;

	if (sdev->host->hostt->compat_ioctl)
		return sdev->host->hostt->compat_ioctl(sdev, cmd, arg);

	return ret;
}
EXPORT_SYMBOL(scsi_compat_ioctl);
#endif

/*
 * We can process a reset even when a device isn't fully operable.
 */
int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev, int cmd,
		bool ndelay)
{
	if (cmd == SG_SCSI_RESET && ndelay) {
		if (scsi_host_in_recovery(sdev->host))
			return -EAGAIN;
	} else {
		if (!scsi_block_when_processing_errors(sdev))
			return -ENODEV;
	}

	return 0;
}
EXPORT_SYMBOL_GPL(scsi_ioctl_block_when_processing_errors);
Commit	Line	Data
457c8996	1	// SPDX-License-Identifier: GPL-2.0-only
1da177e4 LT	2	/*
	3	* Changes:
	4	* Arnaldo Carvalho de Melo <acme@conectiva.com.br> 08/23/2000
	5	* - get rid of some verify_areas and use __copy*user and __get/put_user
	6	* for the ones that remain
	7	*/
	8	#include <linux/module.h>
	9	#include <linux/blkdev.h>
	10	#include <linux/interrupt.h>
	11	#include <linux/errno.h>
	12	#include <linux/kernel.h>
	13	#include <linux/sched.h>
	14	#include <linux/mm.h>
	15	#include <linux/string.h>
7c0f6ba6	16	#include <linux/uaccess.h>
1da177e4 LT	17
1da177e4 LT	18	#include <scsi/scsi.h>
beb40487	19	#include <scsi/scsi_cmnd.h>
1da177e4 LT	20	#include <scsi/scsi_device.h>
	21	#include <scsi/scsi_eh.h>
	22	#include <scsi/scsi_host.h>
	23	#include <scsi/scsi_ioctl.h>
1da177e4 LT	24	#include <scsi/sg.h>
	25	#include <scsi/scsi_dbg.h>
	26
	27	#include "scsi_logging.h"
	28
	29	#define NORMAL_RETRIES 5
	30	#define IOCTL_NORMAL_TIMEOUT (10 * HZ)
1da177e4 LT	31
	32	#define MAX_BUF PAGE_SIZE
	33
32993523 CH	34	/**
	35	* ioctl_probe -- return host identification
	36	* @host: host to identify
	37	* @buffer: userspace buffer for identification
	38	*
	39	* Return an identifying string at @buffer, if @buffer is non-NULL, filling
	40	* to the length stored at * (int *) @buffer.
1da177e4	41	*/
1da177e4 LT	42	static int ioctl_probe(struct Scsi_Host host, void __user buffer)
	43	{
	44	unsigned int len, slen;
	45	const char *string;
1da177e4	46
32993523	47	if (buffer) {
1da177e4 LT	48	if (get_user(len, (unsigned int __user *) buffer))
	49	return -EFAULT;
	50
	51	if (host->hostt->info)
	52	string = host->hostt->info(host);
	53	else
	54	string = host->hostt->name;
	55	if (string) {
	56	slen = strlen(string);
	57	if (len > slen)
	58	len = slen + 1;
	59	if (copy_to_user(buffer, string, len))
	60	return -EFAULT;
	61	}
	62	}
32993523	63	return 1;
1da177e4 LT	64	}
	65
	66	/*
	67
	68	* The SCSI_IOCTL_SEND_COMMAND ioctl sends a command out to the SCSI host.
	69	* The IOCTL_NORMAL_TIMEOUT and NORMAL_RETRIES variables are used.
	70	*
	71	* dev is the SCSI device struct ptr, (int ) arg is the length of the
	72	* input data, if any, not including the command string & counts,
	73	* ((int )arg + 1) is the output buffer size in bytes.
	74	*
	75	* (char ) ((int *) arg)[2] the actual command byte.
	76	*
	77	* Note that if more than MAX_BUF bytes are requested to be transferred,
	78	* the ioctl will fail with error EINVAL.
	79	*
	80	* This size does not include the initial lengths that were passed.
	81	*
	82	* The SCSI command is read from the memory location immediately after the
	83	* length words, and the input data is right after the command. The SCSI
	84	* routines know the command size based on the opcode decode.
	85	*
	86	* The output area is then filled in starting from the command byte.
	87	*/
	88
	89	static int ioctl_internal_command(struct scsi_device sdev, char cmd,
	90	int timeout, int retries)
	91	{
1da177e4 LT	92	int result;
	93	struct scsi_sense_hdr sshdr;
	94
e5f73ce3 HR	95	SCSI_LOG_IOCTL(1, sdev_printk(KERN_INFO, sdev,
e5f73ce3 HR	96	"Trying ioctl with scsi command %d\n", *cmd));
1da177e4	97
1cf72699	98	result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
f4f4e47e	99	&sshdr, timeout, retries, NULL);
1da177e4	100
e5f73ce3 HR	101	SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
e5f73ce3 HR	102	"Ioctl returned 0x%x\n", result));
1da177e4	103
c65be1a6 JT	104	if (driver_byte(result) == DRIVER_SENSE &&
c65be1a6 JT	105	scsi_sense_valid(&sshdr)) {
1da177e4 LT	106	switch (sshdr.sense_key) {
	107	case ILLEGAL_REQUEST:
	108	if (cmd[0] == ALLOW_MEDIUM_REMOVAL)
	109	sdev->lockable = 0;
	110	else
e5f73ce3 HR	111	sdev_printk(KERN_INFO, sdev,
	112	"ioctl_internal_command: "
	113	"ILLEGAL REQUEST "
	114	"asc=0x%x ascq=0x%x\n",
	115	sshdr.asc, sshdr.ascq);
1da177e4 LT	116	break;
1da177e4 LT	117	case NOT_READY: /* This happens if there is no disc in drive */
a75ad3c2	118	if (sdev->removable)
1da177e4	119	break;
df561f66	120	fallthrough;
1da177e4 LT	121	case UNIT_ATTENTION:
	122	if (sdev->removable) {
	123	sdev->changed = 1;
1cf72699	124	result = 0; /* This is no longer considered an error */
1da177e4 LT	125	break;
1da177e4 LT	126	}
df561f66	127	fallthrough; /* for non-removable media */
3bf2ff67	128	default:
9ccfc756 JB	129	sdev_printk(KERN_INFO, sdev,
	130	"ioctl_internal_command return code = %x\n",
	131	result);
d811b848	132	scsi_print_sense_hdr(sdev, NULL, &sshdr);
1da177e4 LT	133	break;
	134	}
	135	}
	136
e5f73ce3 HR	137	SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
e5f73ce3 HR	138	"IOCTL Releasing command\n"));
1da177e4 LT	139	return result;
	140	}
	141
	142	int scsi_set_medium_removal(struct scsi_device *sdev, char state)
	143	{
	144	char scsi_cmd[MAX_COMMAND_SIZE];
	145	int ret;
	146
	147	if (!sdev->removable \|\| !sdev->lockable)
	148	return 0;
	149
	150	scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
	151	scsi_cmd[1] = 0;
	152	scsi_cmd[2] = 0;
	153	scsi_cmd[3] = 0;
	154	scsi_cmd[4] = state;
	155	scsi_cmd[5] = 0;
	156
	157	ret = ioctl_internal_command(sdev, scsi_cmd,
	158	IOCTL_NORMAL_TIMEOUT, NORMAL_RETRIES);
	159	if (ret == 0)
	160	sdev->locked = (state == SCSI_REMOVAL_PREVENT);
	161	return ret;
	162	}
	163	EXPORT_SYMBOL(scsi_set_medium_removal);
	164
1da177e4 LT	165	/*
	166	* The scsi_ioctl_get_pci() function places into arg the value
	167	* pci_dev::slot_name (8 characters) for the PCI device (if any).
	168	* Returns: 0 on success
	169	* -ENXIO if there isn't a PCI device pointer
	170	* (could be because the SCSI driver hasn't been
	171	* updated yet, or because it isn't a SCSI
	172	* device)
	173	* any copy_to_user() error on failure there
	174	*/
	175	static int scsi_ioctl_get_pci(struct scsi_device sdev, void __user arg)
	176	{
	177	struct device *dev = scsi_get_device(sdev->host);
71610f55	178	const char *name;
1da177e4 LT	179
	180	if (!dev)
	181	return -ENXIO;
71610f55 KS	182
	183	name = dev_name(dev);
	184
	185	/* compatibility with old ioctl which only returned
	186	* 20 characters */
	187	return copy_to_user(arg, name, min(strlen(name), (size_t)20))
	188	? -EFAULT: 0;
1da177e4 LT	189	}
	190
	191
7eafd137	192	static int scsi_ioctl_common(struct scsi_device sdev, int cmd, void __user arg)
1da177e4 LT	193	{
1da177e4 LT	194	char scsi_cmd[MAX_COMMAND_SIZE];
74a78ebd	195	struct scsi_sense_hdr sense_hdr;
1da177e4	196
1da177e4 LT	197	/* Check for deprecated ioctls ... all the ioctls which don't
	198	* follow the new unique numbering scheme are deprecated */
	199	switch (cmd) {
	200	case SCSI_IOCTL_SEND_COMMAND:
	201	case SCSI_IOCTL_TEST_UNIT_READY:
	202	case SCSI_IOCTL_BENCHMARK_COMMAND:
	203	case SCSI_IOCTL_SYNC:
	204	case SCSI_IOCTL_START_UNIT:
	205	case SCSI_IOCTL_STOP_UNIT:
	206	printk(KERN_WARNING "program %s is using a deprecated SCSI "
	207	"ioctl, please convert it to SG_IO\n", current->comm);
	208	break;
	209	default:
	210	break;
	211	}
	212
	213	switch (cmd) {
a656d47a AV	214	case SCSI_IOCTL_GET_IDLUN: {
	215	struct scsi_idlun v = {
	216	.dev_id = (sdev->id & 0xff)
	217	+ ((sdev->lun & 0xff) << 8)
	218	+ ((sdev->channel & 0xff) << 16)
	219	+ ((sdev->host->host_no & 0xff) << 24),
	220	.host_unique_id = sdev->host->unique_id
	221	};
	222	if (copy_to_user(arg, &v, sizeof(struct scsi_idlun)))
1da177e4	223	return -EFAULT;
1da177e4	224	return 0;
a656d47a	225	}
1da177e4 LT	226	case SCSI_IOCTL_GET_BUS_NUMBER:
	227	return put_user(sdev->host->host_no, (int __user *)arg);
	228	case SCSI_IOCTL_PROBE_HOST:
	229	return ioctl_probe(sdev->host, arg);
	230	case SCSI_IOCTL_SEND_COMMAND:
	231	if (!capable(CAP_SYS_ADMIN) \|\| !capable(CAP_SYS_RAWIO))
	232	return -EACCES;
e915e872	233	return sg_scsi_ioctl(sdev->request_queue, NULL, 0, arg);
1da177e4 LT	234	case SCSI_IOCTL_DOORLOCK:
	235	return scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
	236	case SCSI_IOCTL_DOORUNLOCK:
	237	return scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
	238	case SCSI_IOCTL_TEST_UNIT_READY:
	239	return scsi_test_unit_ready(sdev, IOCTL_NORMAL_TIMEOUT,
74a78ebd	240	NORMAL_RETRIES, &sense_hdr);
1da177e4 LT	241	case SCSI_IOCTL_START_UNIT:
	242	scsi_cmd[0] = START_STOP;
	243	scsi_cmd[1] = 0;
	244	scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
	245	scsi_cmd[4] = 1;
	246	return ioctl_internal_command(sdev, scsi_cmd,
	247	START_STOP_TIMEOUT, NORMAL_RETRIES);
	248	case SCSI_IOCTL_STOP_UNIT:
	249	scsi_cmd[0] = START_STOP;
	250	scsi_cmd[1] = 0;
	251	scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
	252	scsi_cmd[4] = 0;
	253	return ioctl_internal_command(sdev, scsi_cmd,
	254	START_STOP_TIMEOUT, NORMAL_RETRIES);
	255	case SCSI_IOCTL_GET_PCI:
	256	return scsi_ioctl_get_pci(sdev, arg);
906d15fb CH	257	case SG_SCSI_RESET:
906d15fb CH	258	return scsi_ioctl_reset(sdev, arg);
1da177e4	259	}
7eafd137 AB	260	return -ENOIOCTLCMD;
	261	}
	262
	263	/**
	264	* scsi_ioctl - Dispatch ioctl to scsi device
	265	* @sdev: scsi device receiving ioctl
	266	* @cmd: which ioctl is it
	267	* @arg: data associated with ioctl
	268	*
	269	* Description: The scsi_ioctl() function differs from most ioctls in that it
	270	* does not take a major/minor number as the dev field. Rather, it takes
	271	* a pointer to a &struct scsi_device.
	272	*/
	273	int scsi_ioctl(struct scsi_device sdev, int cmd, void __user arg)
	274	{
	275	int ret = scsi_ioctl_common(sdev, cmd, arg);
	276
	277	if (ret != -ENOIOCTLCMD)
	278	return ret;
	279
	280	if (sdev->host->hostt->ioctl)
	281	return sdev->host->hostt->ioctl(sdev, cmd, arg);
	282
1da177e4 LT	283	return -EINVAL;
	284	}
	285	EXPORT_SYMBOL(scsi_ioctl);
	286
7eafd137 AB	287	#ifdef CONFIG_COMPAT
	288	int scsi_compat_ioctl(struct scsi_device sdev, int cmd, void __user arg)
	289	{
	290	int ret = scsi_ioctl_common(sdev, cmd, arg);
	291
	292	if (ret != -ENOIOCTLCMD)
	293	return ret;
	294
	295	if (sdev->host->hostt->compat_ioctl)
	296	return sdev->host->hostt->compat_ioctl(sdev, cmd, arg);
	297
	298	return ret;
	299	}
	300	EXPORT_SYMBOL(scsi_compat_ioctl);
	301	#endif
	302
906d15fb CH	303	/*
906d15fb CH	304	* We can process a reset even when a device isn't fully operable.
1da177e4	305	*/
906d15fb CH	306	int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev, int cmd,
906d15fb CH	307	bool ndelay)
1da177e4	308	{
906d15fb	309	if (cmd == SG_SCSI_RESET && ndelay) {
939647ee	310	if (scsi_host_in_recovery(sdev->host))
e9afccc5	311	return -EAGAIN;
906d15fb CH	312	} else {
	313	if (!scsi_block_when_processing_errors(sdev))
	314	return -ENODEV;
1da177e4	315	}
906d15fb CH	316
906d15fb CH	317	return 0;
1da177e4	318	}
906d15fb	319	EXPORT_SYMBOL_GPL(scsi_ioctl_block_when_processing_errors);