Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * sata_uli.c - ULi Electronics SATA | |
3 | * | |
af36d7f0 JG |
4 | * |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License as published by | |
7 | * the Free Software Foundation; either version 2, or (at your option) | |
8 | * any later version. | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | * GNU General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; see the file COPYING. If not, write to | |
17 | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
18 | * | |
19 | * | |
20 | * libata documentation is available via 'make {ps|pdf}docs', | |
21 | * as Documentation/DocBook/libata.* | |
22 | * | |
23 | * Hardware documentation available under NDA. | |
1da177e4 LT |
24 | * |
25 | */ | |
26 | ||
27 | #include <linux/config.h> | |
28 | #include <linux/kernel.h> | |
29 | #include <linux/module.h> | |
30 | #include <linux/pci.h> | |
31 | #include <linux/init.h> | |
32 | #include <linux/blkdev.h> | |
33 | #include <linux/delay.h> | |
34 | #include <linux/interrupt.h> | |
a9524a76 | 35 | #include <linux/device.h> |
1da177e4 LT |
36 | #include <scsi/scsi_host.h> |
37 | #include <linux/libata.h> | |
38 | ||
39 | #define DRV_NAME "sata_uli" | |
40 | #define DRV_VERSION "0.5" | |
41 | ||
42 | enum { | |
43 | uli_5289 = 0, | |
44 | uli_5287 = 1, | |
45 | uli_5281 = 2, | |
46 | ||
50106c5a JG |
47 | uli_max_ports = 4, |
48 | ||
1da177e4 LT |
49 | /* PCI configuration registers */ |
50 | ULI5287_BASE = 0x90, /* sata0 phy SCR registers */ | |
51 | ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */ | |
52 | ULI5281_BASE = 0x60, /* sata0 phy SCR registers */ | |
53 | ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */ | |
54 | }; | |
55 | ||
50106c5a JG |
56 | struct uli_priv { |
57 | unsigned int scr_cfg_addr[uli_max_ports]; | |
58 | }; | |
59 | ||
1da177e4 LT |
60 | static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); |
61 | static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg); | |
62 | static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); | |
63 | ||
3b7d697d | 64 | static const struct pci_device_id uli_pci_tbl[] = { |
1da177e4 LT |
65 | { PCI_VENDOR_ID_AL, 0x5289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5289 }, |
66 | { PCI_VENDOR_ID_AL, 0x5287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5287 }, | |
67 | { PCI_VENDOR_ID_AL, 0x5281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5281 }, | |
68 | { } /* terminate list */ | |
69 | }; | |
70 | ||
71 | ||
72 | static struct pci_driver uli_pci_driver = { | |
73 | .name = DRV_NAME, | |
74 | .id_table = uli_pci_tbl, | |
75 | .probe = uli_init_one, | |
76 | .remove = ata_pci_remove_one, | |
77 | }; | |
78 | ||
193515d5 | 79 | static struct scsi_host_template uli_sht = { |
1da177e4 LT |
80 | .module = THIS_MODULE, |
81 | .name = DRV_NAME, | |
82 | .ioctl = ata_scsi_ioctl, | |
83 | .queuecommand = ata_scsi_queuecmd, | |
1da177e4 LT |
84 | .can_queue = ATA_DEF_QUEUE, |
85 | .this_id = ATA_SHT_THIS_ID, | |
86 | .sg_tablesize = LIBATA_MAX_PRD, | |
1da177e4 LT |
87 | .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
88 | .emulated = ATA_SHT_EMULATED, | |
89 | .use_clustering = ATA_SHT_USE_CLUSTERING, | |
90 | .proc_name = DRV_NAME, | |
91 | .dma_boundary = ATA_DMA_BOUNDARY, | |
92 | .slave_configure = ata_scsi_slave_config, | |
93 | .bios_param = ata_std_bios_param, | |
1da177e4 LT |
94 | }; |
95 | ||
057ace5e | 96 | static const struct ata_port_operations uli_ops = { |
1da177e4 LT |
97 | .port_disable = ata_port_disable, |
98 | ||
99 | .tf_load = ata_tf_load, | |
100 | .tf_read = ata_tf_read, | |
101 | .check_status = ata_check_status, | |
102 | .exec_command = ata_exec_command, | |
103 | .dev_select = ata_std_dev_select, | |
104 | ||
105 | .phy_reset = sata_phy_reset, | |
106 | ||
107 | .bmdma_setup = ata_bmdma_setup, | |
108 | .bmdma_start = ata_bmdma_start, | |
109 | .bmdma_stop = ata_bmdma_stop, | |
110 | .bmdma_status = ata_bmdma_status, | |
111 | .qc_prep = ata_qc_prep, | |
112 | .qc_issue = ata_qc_issue_prot, | |
113 | ||
114 | .eng_timeout = ata_eng_timeout, | |
115 | ||
116 | .irq_handler = ata_interrupt, | |
117 | .irq_clear = ata_bmdma_irq_clear, | |
118 | ||
119 | .scr_read = uli_scr_read, | |
120 | .scr_write = uli_scr_write, | |
121 | ||
122 | .port_start = ata_port_start, | |
123 | .port_stop = ata_port_stop, | |
aa8f0dc6 | 124 | .host_stop = ata_host_stop, |
1da177e4 LT |
125 | }; |
126 | ||
127 | static struct ata_port_info uli_port_info = { | |
128 | .sht = &uli_sht, | |
129 | .host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | | |
130 | ATA_FLAG_NO_LEGACY, | |
7da79312 BR |
131 | .pio_mask = 0x1f, /* pio0-4 */ |
132 | .udma_mask = 0x7f, /* udma0-6 */ | |
1da177e4 LT |
133 | .port_ops = &uli_ops, |
134 | }; | |
135 | ||
136 | ||
137 | MODULE_AUTHOR("Peer Chen"); | |
138 | MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller"); | |
139 | MODULE_LICENSE("GPL"); | |
140 | MODULE_DEVICE_TABLE(pci, uli_pci_tbl); | |
141 | MODULE_VERSION(DRV_VERSION); | |
142 | ||
143 | static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) | |
144 | { | |
50106c5a JG |
145 | struct uli_priv *hpriv = ap->host_set->private_data; |
146 | return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); | |
1da177e4 LT |
147 | } |
148 | ||
149 | static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) | |
150 | { | |
151 | struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); | |
152 | unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg); | |
153 | u32 val; | |
154 | ||
155 | pci_read_config_dword(pdev, cfg_addr, &val); | |
156 | return val; | |
157 | } | |
158 | ||
159 | static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) | |
160 | { | |
161 | struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); | |
162 | unsigned int cfg_addr = get_scr_cfg_addr(ap, scr); | |
163 | ||
164 | pci_write_config_dword(pdev, cfg_addr, val); | |
165 | } | |
166 | ||
167 | static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg) | |
168 | { | |
169 | if (sc_reg > SCR_CONTROL) | |
170 | return 0xffffffffU; | |
171 | ||
172 | return uli_scr_cfg_read(ap, sc_reg); | |
173 | } | |
174 | ||
175 | static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) | |
176 | { | |
177 | if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0 | |
178 | return; | |
179 | ||
180 | uli_scr_cfg_write(ap, sc_reg, val); | |
181 | } | |
182 | ||
1da177e4 LT |
183 | static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) |
184 | { | |
a9524a76 | 185 | static int printed_version; |
1da177e4 LT |
186 | struct ata_probe_ent *probe_ent; |
187 | struct ata_port_info *ppi; | |
188 | int rc; | |
189 | unsigned int board_idx = (unsigned int) ent->driver_data; | |
190 | int pci_dev_busy = 0; | |
50106c5a | 191 | struct uli_priv *hpriv; |
1da177e4 | 192 | |
a9524a76 JG |
193 | if (!printed_version++) |
194 | dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); | |
195 | ||
1da177e4 LT |
196 | rc = pci_enable_device(pdev); |
197 | if (rc) | |
198 | return rc; | |
199 | ||
200 | rc = pci_request_regions(pdev, DRV_NAME); | |
201 | if (rc) { | |
202 | pci_dev_busy = 1; | |
203 | goto err_out; | |
204 | } | |
205 | ||
206 | rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); | |
207 | if (rc) | |
208 | goto err_out_regions; | |
209 | rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); | |
210 | if (rc) | |
211 | goto err_out_regions; | |
212 | ||
213 | ppi = &uli_port_info; | |
47a86593 | 214 | probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); |
1da177e4 LT |
215 | if (!probe_ent) { |
216 | rc = -ENOMEM; | |
217 | goto err_out_regions; | |
218 | } | |
8a60a071 | 219 | |
50106c5a JG |
220 | hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); |
221 | if (!hpriv) { | |
222 | rc = -ENOMEM; | |
223 | goto err_out_probe_ent; | |
224 | } | |
225 | ||
226 | probe_ent->private_data = hpriv; | |
227 | ||
1da177e4 LT |
228 | switch (board_idx) { |
229 | case uli_5287: | |
50106c5a JG |
230 | hpriv->scr_cfg_addr[0] = ULI5287_BASE; |
231 | hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; | |
1da177e4 LT |
232 | probe_ent->n_ports = 4; |
233 | ||
234 | probe_ent->port[2].cmd_addr = pci_resource_start(pdev, 0) + 8; | |
235 | probe_ent->port[2].altstatus_addr = | |
236 | probe_ent->port[2].ctl_addr = | |
237 | (pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4; | |
238 | probe_ent->port[2].bmdma_addr = pci_resource_start(pdev, 4) + 16; | |
50106c5a | 239 | hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; |
1da177e4 LT |
240 | |
241 | probe_ent->port[3].cmd_addr = pci_resource_start(pdev, 2) + 8; | |
242 | probe_ent->port[3].altstatus_addr = | |
243 | probe_ent->port[3].ctl_addr = | |
244 | (pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4; | |
245 | probe_ent->port[3].bmdma_addr = pci_resource_start(pdev, 4) + 24; | |
50106c5a | 246 | hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; |
1da177e4 LT |
247 | |
248 | ata_std_ports(&probe_ent->port[2]); | |
249 | ata_std_ports(&probe_ent->port[3]); | |
250 | break; | |
251 | ||
252 | case uli_5289: | |
50106c5a JG |
253 | hpriv->scr_cfg_addr[0] = ULI5287_BASE; |
254 | hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; | |
1da177e4 LT |
255 | break; |
256 | ||
257 | case uli_5281: | |
50106c5a JG |
258 | hpriv->scr_cfg_addr[0] = ULI5281_BASE; |
259 | hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS; | |
1da177e4 LT |
260 | break; |
261 | ||
262 | default: | |
263 | BUG(); | |
264 | break; | |
265 | } | |
266 | ||
267 | pci_set_master(pdev); | |
a04ce0ff | 268 | pci_intx(pdev, 1); |
1da177e4 LT |
269 | |
270 | /* FIXME: check ata_device_add return value */ | |
271 | ata_device_add(probe_ent); | |
272 | kfree(probe_ent); | |
273 | ||
274 | return 0; | |
275 | ||
50106c5a JG |
276 | err_out_probe_ent: |
277 | kfree(probe_ent); | |
1da177e4 LT |
278 | err_out_regions: |
279 | pci_release_regions(pdev); | |
1da177e4 LT |
280 | err_out: |
281 | if (!pci_dev_busy) | |
282 | pci_disable_device(pdev); | |
283 | return rc; | |
284 | ||
285 | } | |
286 | ||
287 | static int __init uli_init(void) | |
288 | { | |
289 | return pci_module_init(&uli_pci_driver); | |
290 | } | |
291 | ||
292 | static void __exit uli_exit(void) | |
293 | { | |
294 | pci_unregister_driver(&uli_pci_driver); | |
295 | } | |
296 | ||
297 | ||
298 | module_init(uli_init); | |
299 | module_exit(uli_exit); |