Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /************************************************************************** |
2 | * Initio 9100 device driver for Linux. | |
3 | * | |
4 | * Copyright (c) 1994-1998 Initio Corporation | |
5 | * All rights reserved. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2, or (at your option) | |
10 | * any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; see the file COPYING. If not, write to | |
19 | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
20 | * | |
21 | * -------------------------------------------------------------------------- | |
22 | * | |
23 | * Redistribution and use in source and binary forms, with or without | |
24 | * modification, are permitted provided that the following conditions | |
25 | * are met: | |
26 | * 1. Redistributions of source code must retain the above copyright | |
27 | * notice, this list of conditions, and the following disclaimer, | |
28 | * without modification, immediately at the beginning of the file. | |
29 | * 2. Redistributions in binary form must reproduce the above copyright | |
30 | * notice, this list of conditions and the following disclaimer in the | |
31 | * documentation and/or other materials provided with the distribution. | |
32 | * 3. The name of the author may not be used to endorse or promote products | |
33 | * derived from this software without specific prior written permission. | |
34 | * | |
35 | * Where this Software is combined with software released under the terms of | |
36 | * the GNU General Public License ("GPL") and the terms of the GPL would require the | |
37 | * combined work to also be released under the terms of the GPL, the terms | |
38 | * and conditions of this License will apply in addition to those of the | |
39 | * GPL with the exception of any terms or conditions of this License that | |
40 | * conflict with, or are expressly prohibited by, the GPL. | |
41 | * | |
42 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND | |
43 | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
44 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
45 | * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR | |
46 | * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
47 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
48 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
49 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
50 | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
51 | * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
52 | * SUCH DAMAGE. | |
53 | * | |
54 | **************************************************************************/ | |
55 | ||
56 | ||
1da177e4 LT |
57 | #include <linux/types.h> |
58 | ||
59 | #define ULONG unsigned long | |
60 | #define USHORT unsigned short | |
61 | #define UCHAR unsigned char | |
62 | #define BYTE unsigned char | |
63 | #define WORD unsigned short | |
64 | #define DWORD unsigned long | |
65 | #define UBYTE unsigned char | |
66 | #define UWORD unsigned short | |
67 | #define UDWORD unsigned long | |
68 | #define U32 u32 | |
69 | ||
70 | #define TOTAL_SG_ENTRY 32 | |
71 | #define MAX_SUPPORTED_ADAPTERS 8 | |
72 | #define MAX_OFFSET 15 | |
73 | #define MAX_TARGETS 16 | |
74 | ||
75 | typedef struct { | |
76 | unsigned short base; | |
77 | unsigned short vec; | |
78 | } i91u_config; | |
79 | ||
80 | /***************************************/ | |
81 | /* Tulip Configuration Register Set */ | |
82 | /***************************************/ | |
83 | #define TUL_PVID 0x00 /* Vendor ID */ | |
84 | #define TUL_PDID 0x02 /* Device ID */ | |
85 | #define TUL_PCMD 0x04 /* Command */ | |
86 | #define TUL_PSTUS 0x06 /* Status */ | |
87 | #define TUL_PRID 0x08 /* Revision number */ | |
88 | #define TUL_PPI 0x09 /* Programming interface */ | |
89 | #define TUL_PSC 0x0A /* Sub Class */ | |
90 | #define TUL_PBC 0x0B /* Base Class */ | |
91 | #define TUL_PCLS 0x0C /* Cache line size */ | |
92 | #define TUL_PLTR 0x0D /* Latency timer */ | |
93 | #define TUL_PHDT 0x0E /* Header type */ | |
94 | #define TUL_PBIST 0x0F /* BIST */ | |
95 | #define TUL_PBAD 0x10 /* Base address */ | |
96 | #define TUL_PBAD1 0x14 /* Base address */ | |
97 | #define TUL_PBAD2 0x18 /* Base address */ | |
98 | #define TUL_PBAD3 0x1C /* Base address */ | |
99 | #define TUL_PBAD4 0x20 /* Base address */ | |
100 | #define TUL_PBAD5 0x24 /* Base address */ | |
101 | #define TUL_PRSVD 0x28 /* Reserved */ | |
102 | #define TUL_PRSVD1 0x2C /* Reserved */ | |
103 | #define TUL_PRAD 0x30 /* Expansion ROM base address */ | |
104 | #define TUL_PRSVD2 0x34 /* Reserved */ | |
105 | #define TUL_PRSVD3 0x38 /* Reserved */ | |
106 | #define TUL_PINTL 0x3C /* Interrupt line */ | |
107 | #define TUL_PINTP 0x3D /* Interrupt pin */ | |
108 | #define TUL_PIGNT 0x3E /* MIN_GNT */ | |
109 | #define TUL_PMGNT 0x3F /* MAX_GNT */ | |
110 | ||
111 | /************************/ | |
112 | /* Jasmin Register Set */ | |
113 | /************************/ | |
114 | #define TUL_HACFG0 0x40 /* H/A Configuration Register 0 */ | |
115 | #define TUL_HACFG1 0x41 /* H/A Configuration Register 1 */ | |
116 | #define TUL_HACFG2 0x42 /* H/A Configuration Register 2 */ | |
117 | ||
118 | #define TUL_SDCFG0 0x44 /* SCSI Device Configuration 0 */ | |
119 | #define TUL_SDCFG1 0x45 /* SCSI Device Configuration 1 */ | |
120 | #define TUL_SDCFG2 0x46 /* SCSI Device Configuration 2 */ | |
121 | #define TUL_SDCFG3 0x47 /* SCSI Device Configuration 3 */ | |
122 | ||
123 | #define TUL_GINTS 0x50 /* Global Interrupt Status Register */ | |
124 | #define TUL_GIMSK 0x52 /* Global Interrupt MASK Register */ | |
125 | #define TUL_GCTRL 0x54 /* Global Control Register */ | |
126 | #define TUL_GCTRL_EEPROM_BIT 0x04 | |
127 | #define TUL_GCTRL1 0x55 /* Global Control Register */ | |
128 | #define TUL_DMACFG 0x5B /* DMA configuration */ | |
129 | #define TUL_NVRAM 0x5D /* Non-volatile RAM port */ | |
130 | ||
131 | #define TUL_SCnt0 0x80 /* 00 R/W Transfer Counter Low */ | |
132 | #define TUL_SCnt1 0x81 /* 01 R/W Transfer Counter Mid */ | |
133 | #define TUL_SCnt2 0x82 /* 02 R/W Transfer Count High */ | |
134 | #define TUL_SFifoCnt 0x83 /* 03 R FIFO counter */ | |
135 | #define TUL_SIntEnable 0x84 /* 03 W Interrupt enble */ | |
136 | #define TUL_SInt 0x84 /* 04 R Interrupt Register */ | |
137 | #define TUL_SCtrl0 0x85 /* 05 W Control 0 */ | |
138 | #define TUL_SStatus0 0x85 /* 05 R Status 0 */ | |
139 | #define TUL_SCtrl1 0x86 /* 06 W Control 1 */ | |
140 | #define TUL_SStatus1 0x86 /* 06 R Status 1 */ | |
141 | #define TUL_SConfig 0x87 /* 07 W Configuration */ | |
142 | #define TUL_SStatus2 0x87 /* 07 R Status 2 */ | |
143 | #define TUL_SPeriod 0x88 /* 08 W Sync. Transfer Period & Offset */ | |
144 | #define TUL_SOffset 0x88 /* 08 R Offset */ | |
145 | #define TUL_SScsiId 0x89 /* 09 W SCSI ID */ | |
146 | #define TUL_SBusId 0x89 /* 09 R SCSI BUS ID */ | |
147 | #define TUL_STimeOut 0x8A /* 0A W Sel/Resel Time Out Register */ | |
148 | #define TUL_SIdent 0x8A /* 0A R Identify Message Register */ | |
149 | #define TUL_SAvail 0x8A /* 0A R Availiable Counter Register */ | |
150 | #define TUL_SData 0x8B /* 0B R/W SCSI data in/out */ | |
151 | #define TUL_SFifo 0x8C /* 0C R/W FIFO */ | |
152 | #define TUL_SSignal 0x90 /* 10 R/W SCSI signal in/out */ | |
153 | #define TUL_SCmd 0x91 /* 11 R/W Command */ | |
154 | #define TUL_STest0 0x92 /* 12 R/W Test0 */ | |
155 | #define TUL_STest1 0x93 /* 13 R/W Test1 */ | |
156 | #define TUL_SCFG1 0x94 /* 14 R/W Configuration */ | |
157 | ||
158 | #define TUL_XAddH 0xC0 /*DMA Transfer Physical Address */ | |
159 | #define TUL_XAddW 0xC8 /*DMA Current Transfer Physical Address */ | |
160 | #define TUL_XCntH 0xD0 /*DMA Transfer Counter */ | |
161 | #define TUL_XCntW 0xD4 /*DMA Current Transfer Counter */ | |
162 | #define TUL_XCmd 0xD8 /*DMA Command Register */ | |
163 | #define TUL_Int 0xDC /*Interrupt Register */ | |
164 | #define TUL_XStatus 0xDD /*DMA status Register */ | |
165 | #define TUL_Mask 0xE0 /*Interrupt Mask Register */ | |
166 | #define TUL_XCtrl 0xE4 /*DMA Control Register */ | |
167 | #define TUL_XCtrl1 0xE5 /*DMA Control Register 1 */ | |
168 | #define TUL_XFifo 0xE8 /*DMA FIFO */ | |
169 | ||
170 | #define TUL_WCtrl 0xF7 /*Bus master wait state control */ | |
171 | #define TUL_DCtrl 0xFB /*DMA delay control */ | |
172 | ||
173 | /*----------------------------------------------------------------------*/ | |
174 | /* bit definition for Command register of Configuration Space Header */ | |
175 | /*----------------------------------------------------------------------*/ | |
176 | #define BUSMS 0x04 /* BUS MASTER Enable */ | |
177 | #define IOSPA 0x01 /* IO Space Enable */ | |
178 | ||
179 | /*----------------------------------------------------------------------*/ | |
180 | /* Command Codes of Tulip SCSI Command register */ | |
181 | /*----------------------------------------------------------------------*/ | |
182 | #define TSC_EN_RESEL 0x80 /* Enable Reselection */ | |
183 | #define TSC_CMD_COMP 0x84 /* Command Complete Sequence */ | |
184 | #define TSC_SEL 0x01 /* Select Without ATN Sequence */ | |
185 | #define TSC_SEL_ATN 0x11 /* Select With ATN Sequence */ | |
186 | #define TSC_SEL_ATN_DMA 0x51 /* Select With ATN Sequence with DMA */ | |
187 | #define TSC_SEL_ATN3 0x31 /* Select With ATN3 Sequence */ | |
188 | #define TSC_SEL_ATNSTOP 0x12 /* Select With ATN and Stop Sequence */ | |
189 | #define TSC_SELATNSTOP 0x1E /* Select With ATN and Stop Sequence */ | |
190 | ||
191 | #define TSC_SEL_ATN_DIRECT_IN 0x95 /* Select With ATN Sequence */ | |
192 | #define TSC_SEL_ATN_DIRECT_OUT 0x15 /* Select With ATN Sequence */ | |
193 | #define TSC_SEL_ATN3_DIRECT_IN 0xB5 /* Select With ATN3 Sequence */ | |
194 | #define TSC_SEL_ATN3_DIRECT_OUT 0x35 /* Select With ATN3 Sequence */ | |
47bdd718 AB |
195 | #define TSC_XF_DMA_OUT_DIRECT 0x06 /* DMA Xfer Information out */ |
196 | #define TSC_XF_DMA_IN_DIRECT 0x86 /* DMA Xfer Information in */ | |
1da177e4 | 197 | |
47bdd718 AB |
198 | #define TSC_XF_DMA_OUT 0x43 /* DMA Xfer Information out */ |
199 | #define TSC_XF_DMA_IN 0xC3 /* DMA Xfer Information in */ | |
200 | #define TSC_XF_FIFO_OUT 0x03 /* FIFO Xfer Information out */ | |
201 | #define TSC_XF_FIFO_IN 0x83 /* FIFO Xfer Information in */ | |
1da177e4 LT |
202 | |
203 | #define TSC_MSG_ACCEPT 0x0F /* Message Accept */ | |
204 | ||
205 | /*----------------------------------------------------------------------*/ | |
206 | /* bit definition for Tulip SCSI Control 0 Register */ | |
207 | /*----------------------------------------------------------------------*/ | |
208 | #define TSC_RST_SEQ 0x20 /* Reset sequence counter */ | |
209 | #define TSC_FLUSH_FIFO 0x10 /* Flush FIFO */ | |
210 | #define TSC_ABT_CMD 0x04 /* Abort command (sequence) */ | |
211 | #define TSC_RST_CHIP 0x02 /* Reset SCSI Chip */ | |
212 | #define TSC_RST_BUS 0x01 /* Reset SCSI Bus */ | |
213 | ||
214 | /*----------------------------------------------------------------------*/ | |
215 | /* bit definition for Tulip SCSI Control 1 Register */ | |
216 | /*----------------------------------------------------------------------*/ | |
217 | #define TSC_EN_SCAM 0x80 /* Enable SCAM */ | |
218 | #define TSC_TIMER 0x40 /* Select timeout unit */ | |
219 | #define TSC_EN_SCSI2 0x20 /* SCSI-2 mode */ | |
220 | #define TSC_PWDN 0x10 /* Power down mode */ | |
221 | #define TSC_WIDE_CPU 0x08 /* Wide CPU */ | |
222 | #define TSC_HW_RESELECT 0x04 /* Enable HW reselect */ | |
223 | #define TSC_EN_BUS_OUT 0x02 /* Enable SCSI data bus out latch */ | |
224 | #define TSC_EN_BUS_IN 0x01 /* Enable SCSI data bus in latch */ | |
225 | ||
226 | /*----------------------------------------------------------------------*/ | |
227 | /* bit definition for Tulip SCSI Configuration Register */ | |
228 | /*----------------------------------------------------------------------*/ | |
229 | #define TSC_EN_LATCH 0x80 /* Enable phase latch */ | |
230 | #define TSC_INITIATOR 0x40 /* Initiator mode */ | |
231 | #define TSC_EN_SCSI_PAR 0x20 /* Enable SCSI parity */ | |
232 | #define TSC_DMA_8BIT 0x10 /* Alternate dma 8-bits mode */ | |
233 | #define TSC_DMA_16BIT 0x08 /* Alternate dma 16-bits mode */ | |
234 | #define TSC_EN_WDACK 0x04 /* Enable DACK while wide SCSI xfer */ | |
235 | #define TSC_ALT_PERIOD 0x02 /* Alternate sync period mode */ | |
236 | #define TSC_DIS_SCSIRST 0x01 /* Disable SCSI bus reset us */ | |
237 | ||
238 | #define TSC_INITDEFAULT (TSC_INITIATOR | TSC_EN_LATCH | TSC_ALT_PERIOD | TSC_DIS_SCSIRST) | |
239 | ||
240 | #define TSC_WIDE_SCSI 0x80 /* Enable Wide SCSI */ | |
241 | ||
242 | /*----------------------------------------------------------------------*/ | |
243 | /* bit definition for Tulip SCSI signal Register */ | |
244 | /*----------------------------------------------------------------------*/ | |
245 | #define TSC_RST_ACK 0x00 /* Release ACK signal */ | |
246 | #define TSC_RST_ATN 0x00 /* Release ATN signal */ | |
247 | #define TSC_RST_BSY 0x00 /* Release BSY signal */ | |
248 | ||
249 | #define TSC_SET_ACK 0x40 /* ACK signal */ | |
250 | #define TSC_SET_ATN 0x08 /* ATN signal */ | |
251 | ||
252 | #define TSC_REQI 0x80 /* REQ signal */ | |
253 | #define TSC_ACKI 0x40 /* ACK signal */ | |
254 | #define TSC_BSYI 0x20 /* BSY signal */ | |
255 | #define TSC_SELI 0x10 /* SEL signal */ | |
256 | #define TSC_ATNI 0x08 /* ATN signal */ | |
257 | #define TSC_MSGI 0x04 /* MSG signal */ | |
258 | #define TSC_CDI 0x02 /* C/D signal */ | |
259 | #define TSC_IOI 0x01 /* I/O signal */ | |
260 | ||
261 | ||
262 | /*----------------------------------------------------------------------*/ | |
263 | /* bit definition for Tulip SCSI Status 0 Register */ | |
264 | /*----------------------------------------------------------------------*/ | |
265 | #define TSS_INT_PENDING 0x80 /* Interrupt pending */ | |
266 | #define TSS_SEQ_ACTIVE 0x40 /* Sequencer active */ | |
267 | #define TSS_XFER_CNT 0x20 /* Transfer counter zero */ | |
268 | #define TSS_FIFO_EMPTY 0x10 /* FIFO empty */ | |
269 | #define TSS_PAR_ERROR 0x08 /* SCSI parity error */ | |
270 | #define TSS_PH_MASK 0x07 /* SCSI phase mask */ | |
271 | ||
272 | /*----------------------------------------------------------------------*/ | |
273 | /* bit definition for Tulip SCSI Status 1 Register */ | |
274 | /*----------------------------------------------------------------------*/ | |
275 | #define TSS_STATUS_RCV 0x08 /* Status received */ | |
276 | #define TSS_MSG_SEND 0x40 /* Message sent */ | |
277 | #define TSS_CMD_PH_CMP 0x20 /* command phase done */ | |
278 | #define TSS_DATA_PH_CMP 0x10 /* Data phase done */ | |
279 | #define TSS_STATUS_SEND 0x08 /* Status sent */ | |
280 | #define TSS_XFER_CMP 0x04 /* Transfer completed */ | |
281 | #define TSS_SEL_CMP 0x02 /* Selection completed */ | |
282 | #define TSS_ARB_CMP 0x01 /* Arbitration completed */ | |
283 | ||
284 | /*----------------------------------------------------------------------*/ | |
285 | /* bit definition for Tulip SCSI Status 2 Register */ | |
286 | /*----------------------------------------------------------------------*/ | |
287 | #define TSS_CMD_ABTED 0x80 /* Command aborted */ | |
288 | #define TSS_OFFSET_0 0x40 /* Offset counter zero */ | |
289 | #define TSS_FIFO_FULL 0x20 /* FIFO full */ | |
290 | #define TSS_TIMEOUT_0 0x10 /* Timeout counter zero */ | |
291 | #define TSS_BUSY_RLS 0x08 /* Busy release */ | |
292 | #define TSS_PH_MISMATCH 0x04 /* Phase mismatch */ | |
293 | #define TSS_SCSI_BUS_EN 0x02 /* SCSI data bus enable */ | |
294 | #define TSS_SCSIRST 0x01 /* SCSI bus reset in progress */ | |
295 | ||
296 | /*----------------------------------------------------------------------*/ | |
297 | /* bit definition for Tulip SCSI Interrupt Register */ | |
298 | /*----------------------------------------------------------------------*/ | |
299 | #define TSS_RESEL_INT 0x80 /* Reselected interrupt */ | |
300 | #define TSS_SEL_TIMEOUT 0x40 /* Selected/reselected timeout */ | |
301 | #define TSS_BUS_SERV 0x20 | |
302 | #define TSS_SCSIRST_INT 0x10 /* SCSI bus reset detected */ | |
303 | #define TSS_DISC_INT 0x08 /* Disconnected interrupt */ | |
304 | #define TSS_SEL_INT 0x04 /* Select interrupt */ | |
305 | #define TSS_SCAM_SEL 0x02 /* SCAM selected */ | |
306 | #define TSS_FUNC_COMP 0x01 | |
307 | ||
308 | /*----------------------------------------------------------------------*/ | |
309 | /* SCSI Phase Codes. */ | |
310 | /*----------------------------------------------------------------------*/ | |
311 | #define DATA_OUT 0 | |
312 | #define DATA_IN 1 /* 4 */ | |
313 | #define CMD_OUT 2 | |
314 | #define STATUS_IN 3 /* 6 */ | |
315 | #define MSG_OUT 6 /* 3 */ | |
316 | #define MSG_IN 7 | |
317 | ||
318 | ||
319 | ||
320 | /*----------------------------------------------------------------------*/ | |
321 | /* Command Codes of Tulip xfer Command register */ | |
322 | /*----------------------------------------------------------------------*/ | |
323 | #define TAX_X_FORC 0x02 | |
324 | #define TAX_X_ABT 0x04 | |
325 | #define TAX_X_CLR_FIFO 0x08 | |
326 | ||
327 | #define TAX_X_IN 0x21 | |
328 | #define TAX_X_OUT 0x01 | |
329 | #define TAX_SG_IN 0xA1 | |
330 | #define TAX_SG_OUT 0x81 | |
331 | ||
332 | /*----------------------------------------------------------------------*/ | |
333 | /* Tulip Interrupt Register */ | |
334 | /*----------------------------------------------------------------------*/ | |
335 | #define XCMP 0x01 | |
336 | #define FCMP 0x02 | |
337 | #define XABT 0x04 | |
338 | #define XERR 0x08 | |
339 | #define SCMP 0x10 | |
340 | #define IPEND 0x80 | |
341 | ||
342 | /*----------------------------------------------------------------------*/ | |
343 | /* Tulip DMA Status Register */ | |
344 | /*----------------------------------------------------------------------*/ | |
345 | #define XPEND 0x01 /* Transfer pending */ | |
346 | #define FEMPTY 0x02 /* FIFO empty */ | |
347 | ||
348 | ||
349 | ||
350 | /*----------------------------------------------------------------------*/ | |
351 | /* bit definition for TUL_GCTRL */ | |
352 | /*----------------------------------------------------------------------*/ | |
353 | #define EXTSG 0x80 | |
354 | #define EXTAD 0x60 | |
355 | #define SEG4K 0x08 | |
356 | #define EEPRG 0x04 | |
357 | #define MRMUL 0x02 | |
358 | ||
359 | /*----------------------------------------------------------------------*/ | |
360 | /* bit definition for TUL_NVRAM */ | |
361 | /*----------------------------------------------------------------------*/ | |
362 | #define SE2CS 0x08 | |
363 | #define SE2CLK 0x04 | |
364 | #define SE2DO 0x02 | |
365 | #define SE2DI 0x01 | |
366 | ||
367 | ||
368 | /************************************************************************/ | |
369 | /* Scatter-Gather Element Structure */ | |
370 | /************************************************************************/ | |
371 | typedef struct SG_Struc { | |
372 | U32 SG_Ptr; /* Data Pointer */ | |
373 | U32 SG_Len; /* Data Length */ | |
374 | } SG; | |
375 | ||
376 | /*********************************************************************** | |
377 | SCSI Control Block | |
378 | ************************************************************************/ | |
379 | typedef struct Scsi_Ctrl_Blk { | |
380 | struct Scsi_Ctrl_Blk *SCB_NxtScb; | |
381 | UBYTE SCB_Status; /*4 */ | |
382 | UBYTE SCB_NxtStat; /*5 */ | |
383 | UBYTE SCB_Mode; /*6 */ | |
384 | UBYTE SCB_Msgin; /*7 SCB_Res0 */ | |
385 | UWORD SCB_SGIdx; /*8 */ | |
386 | UWORD SCB_SGMax; /*A */ | |
387 | #ifdef ALPHA | |
388 | U32 SCB_Reserved[2]; /*C */ | |
389 | #else | |
390 | U32 SCB_Reserved[3]; /*C */ | |
391 | #endif | |
392 | ||
393 | U32 SCB_XferLen; /*18 Current xfer len */ | |
394 | U32 SCB_TotXLen; /*1C Total xfer len */ | |
395 | U32 SCB_PAddr; /*20 SCB phy. Addr. */ | |
396 | ||
397 | UBYTE SCB_Opcode; /*24 SCB command code */ | |
398 | UBYTE SCB_Flags; /*25 SCB Flags */ | |
399 | UBYTE SCB_Target; /*26 Target Id */ | |
400 | UBYTE SCB_Lun; /*27 Lun */ | |
401 | U32 SCB_BufPtr; /*28 Data Buffer Pointer */ | |
402 | U32 SCB_BufLen; /*2C Data Allocation Length */ | |
403 | UBYTE SCB_SGLen; /*30 SG list # */ | |
404 | UBYTE SCB_SenseLen; /*31 Sense Allocation Length */ | |
405 | UBYTE SCB_HaStat; /*32 */ | |
406 | UBYTE SCB_TaStat; /*33 */ | |
407 | UBYTE SCB_CDBLen; /*34 CDB Length */ | |
408 | UBYTE SCB_Ident; /*35 Identify */ | |
409 | UBYTE SCB_TagMsg; /*36 Tag Message */ | |
410 | UBYTE SCB_TagId; /*37 Queue Tag */ | |
411 | UBYTE SCB_CDB[12]; /*38 */ | |
412 | U32 SCB_SGPAddr; /*44 SG List/Sense Buf phy. Addr. */ | |
413 | U32 SCB_SensePtr; /*48 Sense data pointer */ | |
414 | void (*SCB_Post) (BYTE *, BYTE *); /*4C POST routine */ | |
415 | struct scsi_cmnd *SCB_Srb; /*50 SRB Pointer */ | |
416 | SG SCB_SGList[TOTAL_SG_ENTRY]; /*54 Start of SG list */ | |
417 | } SCB; | |
418 | ||
419 | /* Bit Definition for SCB_Status */ | |
420 | #define SCB_RENT 0x01 | |
421 | #define SCB_PEND 0x02 | |
422 | #define SCB_CONTIG 0x04 /* Contigent Allegiance */ | |
423 | #define SCB_SELECT 0x08 | |
424 | #define SCB_BUSY 0x10 | |
425 | #define SCB_DONE 0x20 | |
426 | ||
427 | ||
428 | /* Opcodes of SCB_Opcode */ | |
429 | #define ExecSCSI 0x1 | |
430 | #define BusDevRst 0x2 | |
431 | #define AbortCmd 0x3 | |
432 | ||
433 | ||
434 | /* Bit Definition for SCB_Mode */ | |
435 | #define SCM_RSENS 0x01 /* request sense mode */ | |
436 | ||
437 | ||
438 | /* Bit Definition for SCB_Flags */ | |
439 | #define SCF_DONE 0x01 | |
440 | #define SCF_POST 0x02 | |
441 | #define SCF_SENSE 0x04 | |
442 | #define SCF_DIR 0x18 | |
443 | #define SCF_NO_DCHK 0x00 | |
444 | #define SCF_DIN 0x08 | |
445 | #define SCF_DOUT 0x10 | |
446 | #define SCF_NO_XF 0x18 | |
447 | #define SCF_WR_VF 0x20 /* Write verify turn on */ | |
448 | #define SCF_POLL 0x40 | |
449 | #define SCF_SG 0x80 | |
450 | ||
451 | /* Error Codes for SCB_HaStat */ | |
452 | #define HOST_SEL_TOUT 0x11 | |
453 | #define HOST_DO_DU 0x12 | |
454 | #define HOST_BUS_FREE 0x13 | |
455 | #define HOST_BAD_PHAS 0x14 | |
456 | #define HOST_INV_CMD 0x16 | |
457 | #define HOST_ABORTED 0x1A /* 07/21/98 */ | |
458 | #define HOST_SCSI_RST 0x1B | |
459 | #define HOST_DEV_RST 0x1C | |
460 | ||
461 | /* Error Codes for SCB_TaStat */ | |
462 | #define TARGET_CHKCOND 0x02 | |
463 | #define TARGET_BUSY 0x08 | |
464 | #define INI_QUEUE_FULL 0x28 | |
465 | ||
466 | /* SCSI MESSAGE */ | |
467 | #define MSG_COMP 0x00 | |
468 | #define MSG_EXTEND 0x01 | |
469 | #define MSG_SDP 0x02 | |
470 | #define MSG_RESTORE 0x03 | |
471 | #define MSG_DISC 0x04 | |
472 | #define MSG_IDE 0x05 | |
473 | #define MSG_ABORT 0x06 | |
474 | #define MSG_REJ 0x07 | |
475 | #define MSG_NOP 0x08 | |
476 | #define MSG_PARITY 0x09 | |
477 | #define MSG_LINK_COMP 0x0A | |
478 | #define MSG_LINK_FLAG 0x0B | |
479 | #define MSG_DEVRST 0x0C | |
480 | #define MSG_ABORT_TAG 0x0D | |
481 | ||
482 | /* Queue tag msg: Simple_quque_tag, Head_of_queue_tag, Ordered_queue_tag */ | |
483 | #define MSG_STAG 0x20 | |
484 | #define MSG_HTAG 0x21 | |
485 | #define MSG_OTAG 0x22 | |
486 | ||
487 | #define MSG_IGNOREWIDE 0x23 | |
488 | ||
489 | #define MSG_IDENT 0x80 | |
490 | ||
491 | /*********************************************************************** | |
492 | Target Device Control Structure | |
493 | **********************************************************************/ | |
494 | ||
495 | typedef struct Tar_Ctrl_Struc { | |
496 | UWORD TCS_Flags; /* 0 */ | |
497 | UBYTE TCS_JS_Period; /* 2 */ | |
498 | UBYTE TCS_SConfig0; /* 3 */ | |
499 | ||
500 | UWORD TCS_DrvFlags; /* 4 */ | |
501 | UBYTE TCS_DrvHead; /* 6 */ | |
502 | UBYTE TCS_DrvSector; /* 7 */ | |
503 | } TCS; | |
504 | ||
505 | /*********************************************************************** | |
506 | Target Device Control Structure | |
507 | **********************************************************************/ | |
508 | ||
509 | /* Bit Definition for TCF_Flags */ | |
510 | #define TCF_SCSI_RATE 0x0007 | |
511 | #define TCF_EN_DISC 0x0008 | |
512 | #define TCF_NO_SYNC_NEGO 0x0010 | |
513 | #define TCF_NO_WDTR 0x0020 | |
514 | #define TCF_EN_255 0x0040 | |
515 | #define TCF_EN_START 0x0080 | |
516 | #define TCF_WDTR_DONE 0x0100 | |
517 | #define TCF_SYNC_DONE 0x0200 | |
518 | #define TCF_BUSY 0x0400 | |
519 | ||
520 | ||
521 | /* Bit Definition for TCF_DrvFlags */ | |
522 | #define TCF_DRV_BUSY 0x01 /* Indicate target busy(driver) */ | |
523 | #define TCF_DRV_EN_TAG 0x0800 | |
524 | #define TCF_DRV_255_63 0x0400 | |
525 | ||
526 | typedef struct I91u_Adpt_Struc { | |
527 | UWORD ADPT_BIOS; /* 0 */ | |
528 | UWORD ADPT_BASE; /* 1 */ | |
529 | UBYTE ADPT_Bus; /* 2 */ | |
530 | UBYTE ADPT_Device; /* 3 */ | |
531 | UBYTE ADPT_INTR; /* 4 */ | |
532 | } INI_ADPT_STRUCT; | |
533 | ||
534 | ||
535 | /*********************************************************************** | |
536 | Host Adapter Control Structure | |
537 | ************************************************************************/ | |
538 | typedef struct Ha_Ctrl_Struc { | |
539 | UWORD HCS_Base; /* 00 */ | |
540 | UWORD HCS_BIOS; /* 02 */ | |
541 | UBYTE HCS_Intr; /* 04 */ | |
542 | UBYTE HCS_SCSI_ID; /* 05 */ | |
543 | UBYTE HCS_MaxTar; /* 06 */ | |
544 | UBYTE HCS_NumScbs; /* 07 */ | |
545 | ||
546 | UBYTE HCS_Flags; /* 08 */ | |
547 | UBYTE HCS_Index; /* 09 */ | |
548 | UBYTE HCS_HaId; /* 0A */ | |
549 | UBYTE HCS_Config; /* 0B */ | |
550 | UWORD HCS_IdMask; /* 0C */ | |
551 | UBYTE HCS_Semaph; /* 0E */ | |
552 | UBYTE HCS_Phase; /* 0F */ | |
553 | UBYTE HCS_JSStatus0; /* 10 */ | |
554 | UBYTE HCS_JSInt; /* 11 */ | |
555 | UBYTE HCS_JSStatus1; /* 12 */ | |
556 | UBYTE HCS_SConf1; /* 13 */ | |
557 | ||
558 | UBYTE HCS_Msg[8]; /* 14 */ | |
559 | SCB *HCS_NxtAvail; /* 1C */ | |
560 | SCB *HCS_Scb; /* 20 */ | |
561 | SCB *HCS_ScbEnd; /* 24 */ | |
562 | SCB *HCS_NxtPend; /* 28 */ | |
563 | SCB *HCS_NxtContig; /* 2C */ | |
564 | SCB *HCS_ActScb; /* 30 */ | |
565 | TCS *HCS_ActTcs; /* 34 */ | |
566 | ||
567 | SCB *HCS_FirstAvail; /* 38 */ | |
568 | SCB *HCS_LastAvail; /* 3C */ | |
569 | SCB *HCS_FirstPend; /* 40 */ | |
570 | SCB *HCS_LastPend; /* 44 */ | |
571 | SCB *HCS_FirstBusy; /* 48 */ | |
572 | SCB *HCS_LastBusy; /* 4C */ | |
573 | SCB *HCS_FirstDone; /* 50 */ | |
574 | SCB *HCS_LastDone; /* 54 */ | |
575 | UBYTE HCS_MaxTags[16]; /* 58 */ | |
576 | UBYTE HCS_ActTags[16]; /* 68 */ | |
577 | TCS HCS_Tcs[MAX_TARGETS]; /* 78 */ | |
578 | spinlock_t HCS_AvailLock; | |
579 | spinlock_t HCS_SemaphLock; | |
580 | struct pci_dev *pci_dev; | |
581 | } HCS; | |
582 | ||
583 | /* Bit Definition for HCB_Config */ | |
584 | #define HCC_SCSI_RESET 0x01 | |
585 | #define HCC_EN_PAR 0x02 | |
586 | #define HCC_ACT_TERM1 0x04 | |
587 | #define HCC_ACT_TERM2 0x08 | |
588 | #define HCC_AUTO_TERM 0x10 | |
589 | #define HCC_EN_PWR 0x80 | |
590 | ||
591 | /* Bit Definition for HCB_Flags */ | |
592 | #define HCF_EXPECT_DISC 0x01 | |
593 | #define HCF_EXPECT_SELECT 0x02 | |
594 | #define HCF_EXPECT_RESET 0x10 | |
595 | #define HCF_EXPECT_DONE_DISC 0x20 | |
596 | ||
597 | /****************************************************************** | |
598 | Serial EEProm | |
599 | *******************************************************************/ | |
600 | ||
601 | typedef struct _NVRAM_SCSI { /* SCSI channel configuration */ | |
602 | UCHAR NVM_ChSCSIID; /* 0Ch -> Channel SCSI ID */ | |
603 | UCHAR NVM_ChConfig1; /* 0Dh -> Channel config 1 */ | |
604 | UCHAR NVM_ChConfig2; /* 0Eh -> Channel config 2 */ | |
605 | UCHAR NVM_NumOfTarg; /* 0Fh -> Number of SCSI target */ | |
606 | /* SCSI target configuration */ | |
607 | UCHAR NVM_Targ0Config; /* 10h -> Target 0 configuration */ | |
608 | UCHAR NVM_Targ1Config; /* 11h -> Target 1 configuration */ | |
609 | UCHAR NVM_Targ2Config; /* 12h -> Target 2 configuration */ | |
610 | UCHAR NVM_Targ3Config; /* 13h -> Target 3 configuration */ | |
611 | UCHAR NVM_Targ4Config; /* 14h -> Target 4 configuration */ | |
612 | UCHAR NVM_Targ5Config; /* 15h -> Target 5 configuration */ | |
613 | UCHAR NVM_Targ6Config; /* 16h -> Target 6 configuration */ | |
614 | UCHAR NVM_Targ7Config; /* 17h -> Target 7 configuration */ | |
615 | UCHAR NVM_Targ8Config; /* 18h -> Target 8 configuration */ | |
616 | UCHAR NVM_Targ9Config; /* 19h -> Target 9 configuration */ | |
617 | UCHAR NVM_TargAConfig; /* 1Ah -> Target A configuration */ | |
618 | UCHAR NVM_TargBConfig; /* 1Bh -> Target B configuration */ | |
619 | UCHAR NVM_TargCConfig; /* 1Ch -> Target C configuration */ | |
620 | UCHAR NVM_TargDConfig; /* 1Dh -> Target D configuration */ | |
621 | UCHAR NVM_TargEConfig; /* 1Eh -> Target E configuration */ | |
622 | UCHAR NVM_TargFConfig; /* 1Fh -> Target F configuration */ | |
623 | } NVRAM_SCSI; | |
624 | ||
625 | typedef struct _NVRAM { | |
626 | /*----------header ---------------*/ | |
627 | USHORT NVM_Signature; /* 0,1: Signature */ | |
628 | UCHAR NVM_Size; /* 2: Size of data structure */ | |
629 | UCHAR NVM_Revision; /* 3: Revision of data structure */ | |
630 | /* ----Host Adapter Structure ---- */ | |
631 | UCHAR NVM_ModelByte0; /* 4: Model number (byte 0) */ | |
632 | UCHAR NVM_ModelByte1; /* 5: Model number (byte 1) */ | |
633 | UCHAR NVM_ModelInfo; /* 6: Model information */ | |
634 | UCHAR NVM_NumOfCh; /* 7: Number of SCSI channel */ | |
635 | UCHAR NVM_BIOSConfig1; /* 8: BIOS configuration 1 */ | |
636 | UCHAR NVM_BIOSConfig2; /* 9: BIOS configuration 2 */ | |
637 | UCHAR NVM_HAConfig1; /* A: Hoat adapter configuration 1 */ | |
638 | UCHAR NVM_HAConfig2; /* B: Hoat adapter configuration 2 */ | |
639 | NVRAM_SCSI NVM_SCSIInfo[2]; | |
640 | UCHAR NVM_reserved[10]; | |
641 | /* ---------- CheckSum ---------- */ | |
642 | USHORT NVM_CheckSum; /* 0x3E, 0x3F: Checksum of NVRam */ | |
643 | } NVRAM, *PNVRAM; | |
644 | ||
645 | /* Bios Configuration for nvram->BIOSConfig1 */ | |
646 | #define NBC1_ENABLE 0x01 /* BIOS enable */ | |
647 | #define NBC1_8DRIVE 0x02 /* Support more than 2 drives */ | |
648 | #define NBC1_REMOVABLE 0x04 /* Support removable drive */ | |
649 | #define NBC1_INT19 0x08 /* Intercept int 19h */ | |
650 | #define NBC1_BIOSSCAN 0x10 /* Dynamic BIOS scan */ | |
651 | #define NBC1_LUNSUPPORT 0x40 /* Support LUN */ | |
652 | ||
653 | /* HA Configuration Byte 1 */ | |
654 | #define NHC1_BOOTIDMASK 0x0F /* Boot ID number */ | |
655 | #define NHC1_LUNMASK 0x70 /* Boot LUN number */ | |
656 | #define NHC1_CHANMASK 0x80 /* Boot Channel number */ | |
657 | ||
658 | /* Bit definition for nvram->SCSIconfig1 */ | |
659 | #define NCC1_BUSRESET 0x01 /* Reset SCSI bus at power up */ | |
660 | #define NCC1_PARITYCHK 0x02 /* SCSI parity enable */ | |
661 | #define NCC1_ACTTERM1 0x04 /* Enable active terminator 1 */ | |
662 | #define NCC1_ACTTERM2 0x08 /* Enable active terminator 2 */ | |
663 | #define NCC1_AUTOTERM 0x10 /* Enable auto terminator */ | |
664 | #define NCC1_PWRMGR 0x80 /* Enable power management */ | |
665 | ||
666 | /* Bit definition for SCSI Target configuration byte */ | |
667 | #define NTC_DISCONNECT 0x08 /* Enable SCSI disconnect */ | |
668 | #define NTC_SYNC 0x10 /* SYNC_NEGO */ | |
669 | #define NTC_NO_WDTR 0x20 /* SYNC_NEGO */ | |
670 | #define NTC_1GIGA 0x40 /* 255 head / 63 sectors (64/32) */ | |
671 | #define NTC_SPINUP 0x80 /* Start disk drive */ | |
672 | ||
673 | /* Default NVRam values */ | |
674 | #define INI_SIGNATURE 0xC925 | |
675 | #define NBC1_DEFAULT (NBC1_ENABLE) | |
676 | #define NCC1_DEFAULT (NCC1_BUSRESET | NCC1_AUTOTERM | NCC1_PARITYCHK) | |
677 | #define NTC_DEFAULT (NTC_NO_WDTR | NTC_1GIGA | NTC_DISCONNECT) | |
678 | ||
679 | /* SCSI related definition */ | |
680 | #define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */ | |
681 | #define DISC_ALLOW 0xC0 /* Disconnect is allowed */ | |
682 | #define SCSICMD_RequestSense 0x03 | |
683 | ||
684 | typedef struct _HCSinfo { | |
685 | ULONG base; | |
686 | UCHAR vec; | |
687 | UCHAR bios; /* High byte of BIOS address */ | |
688 | USHORT BaseAndBios; /* high byte: pHcsInfo->bios,low byte:pHcsInfo->base */ | |
689 | } HCSINFO; | |
690 | ||
691 | #define TUL_RD(x,y) (UCHAR)(inb( (int)((ULONG)(x+y)) )) | |
692 | #define TUL_RDLONG(x,y) (ULONG)(inl((int)((ULONG)(x+y)) )) | |
693 | #define TUL_WR( adr,data) outb( (UCHAR)(data), (int)(adr)) | |
694 | #define TUL_WRSHORT(adr,data) outw( (UWORD)(data), (int)(adr)) | |
695 | #define TUL_WRLONG( adr,data) outl( (ULONG)(data), (int)(adr)) | |
696 | ||
697 | #define SCSI_ABORT_SNOOZE 0 | |
698 | #define SCSI_ABORT_SUCCESS 1 | |
699 | #define SCSI_ABORT_PENDING 2 | |
700 | #define SCSI_ABORT_BUSY 3 | |
701 | #define SCSI_ABORT_NOT_RUNNING 4 | |
702 | #define SCSI_ABORT_ERROR 5 | |
703 | ||
704 | #define SCSI_RESET_SNOOZE 0 | |
705 | #define SCSI_RESET_PUNT 1 | |
706 | #define SCSI_RESET_SUCCESS 2 | |
707 | #define SCSI_RESET_PENDING 3 | |
708 | #define SCSI_RESET_WAKEUP 4 | |
709 | #define SCSI_RESET_NOT_RUNNING 5 | |
710 | #define SCSI_RESET_ERROR 6 | |
711 | ||
712 | #define SCSI_RESET_SYNCHRONOUS 0x01 | |
713 | #define SCSI_RESET_ASYNCHRONOUS 0x02 | |
714 | #define SCSI_RESET_SUGGEST_BUS_RESET 0x04 | |
715 | #define SCSI_RESET_SUGGEST_HOST_RESET 0x08 | |
716 | ||
717 | #define SCSI_RESET_BUS_RESET 0x100 | |
718 | #define SCSI_RESET_HOST_RESET 0x200 | |
719 | #define SCSI_RESET_ACTION 0xff | |
720 |