Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * NCR 5380 defines | |
3 | * | |
4 | * Copyright 1993, Drew Eckhardt | |
5 | * Visionary Computing | |
6 | * (Unix consulting and custom programming) | |
7 | * drew@colorado.edu | |
8 | * +1 (303) 666-5836 | |
9 | * | |
1da177e4 LT |
10 | * For more information, please consult |
11 | * | |
12 | * NCR 5380 Family | |
13 | * SCSI Protocol Controller | |
14 | * Databook | |
15 | * NCR Microelectronics | |
16 | * 1635 Aeroplaza Drive | |
17 | * Colorado Springs, CO 80916 | |
18 | * 1+ (719) 578-3400 | |
19 | * 1+ (800) 334-5454 | |
20 | */ | |
21 | ||
1da177e4 LT |
22 | #ifndef NCR5380_H |
23 | #define NCR5380_H | |
24 | ||
161c0059 | 25 | #include <linux/delay.h> |
1da177e4 | 26 | #include <linux/interrupt.h> |
32b26a10 | 27 | #include <linux/list.h> |
161c0059 FT |
28 | #include <linux/workqueue.h> |
29 | #include <scsi/scsi_dbg.h> | |
28424d3a | 30 | #include <scsi/scsi_eh.h> |
161c0059 | 31 | #include <scsi/scsi_transport_spi.h> |
28424d3a | 32 | |
1da177e4 LT |
33 | #define NDEBUG_ARBITRATION 0x1 |
34 | #define NDEBUG_AUTOSENSE 0x2 | |
35 | #define NDEBUG_DMA 0x4 | |
36 | #define NDEBUG_HANDSHAKE 0x8 | |
37 | #define NDEBUG_INFORMATION 0x10 | |
38 | #define NDEBUG_INIT 0x20 | |
39 | #define NDEBUG_INTR 0x40 | |
40 | #define NDEBUG_LINKED 0x80 | |
41 | #define NDEBUG_MAIN 0x100 | |
42 | #define NDEBUG_NO_DATAOUT 0x200 | |
43 | #define NDEBUG_NO_WRITE 0x400 | |
44 | #define NDEBUG_PIO 0x800 | |
45 | #define NDEBUG_PSEUDO_DMA 0x1000 | |
46 | #define NDEBUG_QUEUES 0x2000 | |
47 | #define NDEBUG_RESELECTION 0x4000 | |
48 | #define NDEBUG_SELECTION 0x8000 | |
49 | #define NDEBUG_USLEEP 0x10000 | |
50 | #define NDEBUG_LAST_BYTE_SENT 0x20000 | |
51 | #define NDEBUG_RESTART_SELECT 0x40000 | |
52 | #define NDEBUG_EXTENDED 0x80000 | |
53 | #define NDEBUG_C400_PREAD 0x100000 | |
54 | #define NDEBUG_C400_PWRITE 0x200000 | |
55 | #define NDEBUG_LISTS 0x400000 | |
9829e528 FT |
56 | #define NDEBUG_ABORT 0x800000 |
57 | #define NDEBUG_TAGS 0x1000000 | |
58 | #define NDEBUG_MERGING 0x2000000 | |
1da177e4 LT |
59 | |
60 | #define NDEBUG_ANY 0xFFFFFFFFUL | |
61 | ||
62 | /* | |
63 | * The contents of the OUTPUT DATA register are asserted on the bus when | |
64 | * either arbitration is occurring or the phase-indicating signals ( | |
65 | * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA | |
66 | * bit in the INITIATOR COMMAND register is set. | |
67 | */ | |
68 | ||
69 | #define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */ | |
70 | #define CURRENT_SCSI_DATA_REG 0 /* ro same */ | |
71 | ||
72 | #define INITIATOR_COMMAND_REG 1 /* rw */ | |
73 | #define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */ | |
74 | #define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */ | |
75 | #define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */ | |
76 | #define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */ | |
77 | #define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */ | |
78 | #define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */ | |
79 | #define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */ | |
80 | #define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */ | |
81 | #define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */ | |
82 | #define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */ | |
83 | ||
84 | #ifdef DIFFERENTIAL | |
85 | #define ICR_BASE ICR_DIFF_ENABLE | |
86 | #else | |
87 | #define ICR_BASE 0 | |
88 | #endif | |
89 | ||
90 | #define MODE_REG 2 | |
91 | /* | |
92 | * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the | |
93 | * transfer, causing the chip to hog the bus. You probably don't want | |
94 | * this. | |
95 | */ | |
96 | #define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */ | |
97 | #define MR_TARGET 0x40 /* rw target mode */ | |
98 | #define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */ | |
99 | #define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */ | |
100 | #define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */ | |
101 | #define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */ | |
102 | #define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */ | |
103 | #define MR_ARBITRATE 0x01 /* rw start arbitration */ | |
104 | ||
105 | #ifdef PARITY | |
106 | #define MR_BASE MR_ENABLE_PAR_CHECK | |
107 | #else | |
108 | #define MR_BASE 0 | |
109 | #endif | |
110 | ||
111 | #define TARGET_COMMAND_REG 3 | |
112 | #define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */ | |
113 | #define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */ | |
114 | #define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */ | |
115 | #define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */ | |
116 | #define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */ | |
117 | ||
118 | #define STATUS_REG 4 /* ro */ | |
119 | /* | |
120 | * Note : a set bit indicates an active signal, driven by us or another | |
121 | * device. | |
122 | */ | |
123 | #define SR_RST 0x80 | |
124 | #define SR_BSY 0x40 | |
125 | #define SR_REQ 0x20 | |
126 | #define SR_MSG 0x10 | |
127 | #define SR_CD 0x08 | |
128 | #define SR_IO 0x04 | |
129 | #define SR_SEL 0x02 | |
130 | #define SR_DBP 0x01 | |
131 | ||
132 | /* | |
133 | * Setting a bit in this register will cause an interrupt to be generated when | |
134 | * BSY is false and SEL true and this bit is asserted on the bus. | |
135 | */ | |
136 | #define SELECT_ENABLE_REG 4 /* wo */ | |
137 | ||
138 | #define BUS_AND_STATUS_REG 5 /* ro */ | |
139 | #define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */ | |
140 | #define BASR_DRQ 0x40 /* ro mirror of DRQ pin */ | |
141 | #define BASR_PARITY_ERROR 0x20 /* ro parity error detected */ | |
142 | #define BASR_IRQ 0x10 /* ro mirror of IRQ pin */ | |
143 | #define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */ | |
144 | #define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */ | |
145 | #define BASR_ATN 0x02 /* ro BUS status */ | |
146 | #define BASR_ACK 0x01 /* ro BUS status */ | |
147 | ||
148 | /* Write any value to this register to start a DMA send */ | |
149 | #define START_DMA_SEND_REG 5 /* wo */ | |
150 | ||
151 | /* | |
152 | * Used in DMA transfer mode, data is latched from the SCSI bus on | |
153 | * the falling edge of REQ (ini) or ACK (tgt) | |
154 | */ | |
155 | #define INPUT_DATA_REG 6 /* ro */ | |
156 | ||
157 | /* Write any value to this register to start a DMA receive */ | |
158 | #define START_DMA_TARGET_RECEIVE_REG 6 /* wo */ | |
159 | ||
160 | /* Read this register to clear interrupt conditions */ | |
161 | #define RESET_PARITY_INTERRUPT_REG 7 /* ro */ | |
162 | ||
163 | /* Write any value to this register to start an ini mode DMA receive */ | |
164 | #define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */ | |
165 | ||
12150797 | 166 | /* NCR 53C400(A) Control Status Register bits: */ |
1da177e4 LT |
167 | #define CSR_RESET 0x80 /* wo Resets 53c400 */ |
168 | #define CSR_53C80_REG 0x80 /* ro 5380 registers busy */ | |
169 | #define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */ | |
170 | #define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */ | |
171 | #define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */ | |
172 | #define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */ | |
173 | #define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */ | |
174 | #define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */ | |
175 | #define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */ | |
176 | ||
177 | #if 0 | |
178 | #define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR | |
179 | #else | |
180 | #define CSR_BASE CSR_53C80_INTR | |
181 | #endif | |
182 | ||
1da177e4 LT |
183 | /* Note : PHASE_* macros are based on the values of the STATUS register */ |
184 | #define PHASE_MASK (SR_MSG | SR_CD | SR_IO) | |
185 | ||
186 | #define PHASE_DATAOUT 0 | |
187 | #define PHASE_DATAIN SR_IO | |
188 | #define PHASE_CMDOUT SR_CD | |
189 | #define PHASE_STATIN (SR_CD | SR_IO) | |
190 | #define PHASE_MSGOUT (SR_MSG | SR_CD) | |
191 | #define PHASE_MSGIN (SR_MSG | SR_CD | SR_IO) | |
192 | #define PHASE_UNKNOWN 0xff | |
193 | ||
194 | /* | |
195 | * Convert status register phase to something we can use to set phase in | |
196 | * the target register so we can get phase mismatch interrupts on DMA | |
197 | * transfers. | |
198 | */ | |
199 | ||
200 | #define PHASE_SR_TO_TCR(phase) ((phase) >> 2) | |
201 | ||
22f5f10d FT |
202 | #ifndef NO_IRQ |
203 | #define NO_IRQ 0 | |
204 | #endif | |
205 | ||
1bb46002 | 206 | #define FLAG_DMA_FIXUP 1 /* Use DMA errata workarounds */ |
1da177e4 | 207 | #define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */ |
ef1081cb | 208 | #define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */ |
9c3f0e2b | 209 | #define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */ |
1da177e4 | 210 | |
1da177e4 | 211 | struct NCR5380_hostdata { |
25894d1f | 212 | NCR5380_implementation_fields; /* Board-specific data */ |
820682b1 FT |
213 | u8 __iomem *io; /* Remapped 5380 address */ |
214 | u8 __iomem *pdma_io; /* Remapped PDMA address */ | |
25894d1f FT |
215 | unsigned long poll_loops; /* Register polling limit */ |
216 | spinlock_t lock; /* Protects this struct */ | |
217 | struct scsi_cmnd *connected; /* Currently connected cmnd */ | |
218 | struct list_head disconnected; /* Waiting for reconnect */ | |
219 | struct Scsi_Host *host; /* SCSI host backpointer */ | |
220 | struct workqueue_struct *work_q; /* SCSI host work queue */ | |
221 | struct work_struct main_task; /* Work item for main loop */ | |
222 | int flags; /* Board-specific quirks */ | |
223 | int dma_len; /* Requested length of DMA */ | |
224 | int read_overruns; /* Transfer size reduction for DMA erratum */ | |
820682b1 FT |
225 | unsigned long io_port; /* Device IO port */ |
226 | unsigned long base; /* Device base address */ | |
25894d1f FT |
227 | struct list_head unissued; /* Waiting to be issued */ |
228 | struct scsi_cmnd *selecting; /* Cmnd to be connected */ | |
229 | struct list_head autosense; /* Priority cmnd queue */ | |
230 | struct scsi_cmnd *sensing; /* Cmnd needing autosense */ | |
231 | struct scsi_eh_save ses; /* Cmnd state saved for EH */ | |
232 | unsigned char busy[8]; /* Index = target, bit = lun */ | |
233 | unsigned char id_mask; /* 1 << Host ID */ | |
234 | unsigned char id_higher_mask; /* All bits above id_mask */ | |
235 | unsigned char last_message; /* Last Message Out */ | |
820682b1 | 236 | unsigned long region_size; /* Size of address/port range */ |
8c32513b | 237 | char info[256]; |
1da177e4 LT |
238 | }; |
239 | ||
240 | #ifdef __KERNEL__ | |
241 | ||
32b26a10 FT |
242 | struct NCR5380_cmd { |
243 | struct list_head list; | |
244 | }; | |
245 | ||
246 | #define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd)) | |
247 | ||
08348b1c FT |
248 | #define NCR5380_PIO_CHUNK_SIZE 256 |
249 | ||
d4408dd7 | 250 | /* Time limit (ms) to poll registers when IRQs are disabled, e.g. during PDMA */ |
4822827a | 251 | #define NCR5380_REG_POLL_TIME 15 |
d4408dd7 | 252 | |
32b26a10 FT |
253 | static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr) |
254 | { | |
255 | return ((struct scsi_cmnd *)ncmd_ptr) - 1; | |
256 | } | |
257 | ||
9829e528 FT |
258 | #ifndef NDEBUG |
259 | #define NDEBUG (0) | |
260 | #endif | |
261 | ||
16b9d870 | 262 | #define dprintk(flg, fmt, ...) \ |
d61c5427 FT |
263 | do { if ((NDEBUG) & (flg)) \ |
264 | printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0) | |
16b9d870 | 265 | |
dbb6b350 FT |
266 | #define dsprintk(flg, host, fmt, ...) \ |
267 | do { if ((NDEBUG) & (flg)) \ | |
268 | shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \ | |
269 | } while (0) | |
270 | ||
9829e528 | 271 | #if NDEBUG |
9829e528 FT |
272 | #define NCR5380_dprint(flg, arg) \ |
273 | do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0) | |
274 | #define NCR5380_dprint_phase(flg, arg) \ | |
275 | do { if ((NDEBUG) & (flg)) NCR5380_print_phase(arg); } while (0) | |
276 | static void NCR5380_print_phase(struct Scsi_Host *instance); | |
277 | static void NCR5380_print(struct Scsi_Host *instance); | |
278 | #else | |
52a6a1cb FT |
279 | #define NCR5380_dprint(flg, arg) do {} while (0) |
280 | #define NCR5380_dprint_phase(flg, arg) do {} while (0) | |
9829e528 | 281 | #endif |
1da177e4 | 282 | |
1da177e4 | 283 | static int NCR5380_init(struct Scsi_Host *instance, int flags); |
b6488f97 | 284 | static int NCR5380_maybe_reset_bus(struct Scsi_Host *); |
1da177e4 LT |
285 | static void NCR5380_exit(struct Scsi_Host *instance); |
286 | static void NCR5380_information_transfer(struct Scsi_Host *instance); | |
7d12e780 | 287 | static irqreturn_t NCR5380_intr(int irq, void *dev_id); |
c4028958 | 288 | static void NCR5380_main(struct work_struct *work); |
8c32513b | 289 | static const char *NCR5380_info(struct Scsi_Host *instance); |
1da177e4 | 290 | static void NCR5380_reselect(struct Scsi_Host *instance); |
707d62b3 | 291 | static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *); |
1da177e4 | 292 | static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); |
1da177e4 | 293 | static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); |
d5d37a0a | 294 | static int NCR5380_poll_politely2(struct NCR5380_hostdata *, |
61e1ce58 FT |
295 | unsigned int, u8, u8, |
296 | unsigned int, u8, u8, unsigned long); | |
1da177e4 | 297 | |
d5d37a0a | 298 | static inline int NCR5380_poll_politely(struct NCR5380_hostdata *hostdata, |
61e1ce58 FT |
299 | unsigned int reg, u8 bit, u8 val, |
300 | unsigned long wait) | |
01f17641 | 301 | { |
7c606631 FT |
302 | if ((NCR5380_read(reg) & bit) == val) |
303 | return 0; | |
304 | ||
d5d37a0a | 305 | return NCR5380_poll_politely2(hostdata, reg, bit, val, |
01f17641 FT |
306 | reg, bit, val, wait); |
307 | } | |
308 | ||
4a98f896 FT |
309 | static int NCR5380_dma_xfer_len(struct NCR5380_hostdata *, |
310 | struct scsi_cmnd *); | |
311 | static int NCR5380_dma_send_setup(struct NCR5380_hostdata *, | |
312 | unsigned char *, int); | |
313 | static int NCR5380_dma_recv_setup(struct NCR5380_hostdata *, | |
314 | unsigned char *, int); | |
315 | static int NCR5380_dma_residual(struct NCR5380_hostdata *); | |
316 | ||
317 | static inline int NCR5380_dma_xfer_none(struct NCR5380_hostdata *hostdata, | |
318 | struct scsi_cmnd *cmd) | |
319 | { | |
320 | return 0; | |
321 | } | |
322 | ||
323 | static inline int NCR5380_dma_setup_none(struct NCR5380_hostdata *hostdata, | |
324 | unsigned char *data, int count) | |
325 | { | |
326 | return 0; | |
327 | } | |
328 | ||
329 | static inline int NCR5380_dma_residual_none(struct NCR5380_hostdata *hostdata) | |
330 | { | |
331 | return 0; | |
332 | } | |
333 | ||
1da177e4 | 334 | #endif /* __KERNEL__ */ |
1da177e4 | 335 | #endif /* NCR5380_H */ |