Commit | Line | Data |
---|---|---|
ec8f24b7 | 1 | # SPDX-License-Identifier: GPL-2.0-only |
1da177e4 LT |
2 | menu "SCSI device support" |
3 | ||
fac829fd JB |
4 | config SCSI_MOD |
5 | tristate | |
6 | default y if SCSI=n || SCSI=y | |
7 | default m if SCSI=m | |
8 | ||
61a7afa2 JB |
9 | config RAID_ATTRS |
10 | tristate "RAID Transport Class" | |
11 | default n | |
9361401e | 12 | depends on BLOCK |
fac829fd | 13 | depends on SCSI_MOD |
a7f7f624 | 14 | help |
61a7afa2 JB |
15 | Provides RAID |
16 | ||
33ff4ce4 CH |
17 | config SCSI_COMMON |
18 | tristate | |
19 | ||
1da177e4 LT |
20 | config SCSI |
21 | tristate "SCSI device support" | |
9361401e | 22 | depends on BLOCK |
7689e82e | 23 | select SCSI_DMA if HAS_DMA |
9b1d6c89 | 24 | select SG_POOL |
33ff4ce4 | 25 | select SCSI_COMMON |
78011042 | 26 | select BLK_DEV_BSG_COMMON if BLK_DEV_BSG |
a7f7f624 | 27 | help |
1da177e4 LT |
28 | If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or |
29 | any other SCSI device under Linux, say Y and make sure that you know | |
30 | the name of your SCSI host adapter (the card inside your computer | |
31 | that "speaks" the SCSI protocol, also called SCSI controller), | |
32 | because you will be asked for it. | |
33 | ||
34 | You also need to say Y here if you have a device which speaks | |
35 | the SCSI protocol. Examples of this include the parallel port | |
36 | version of the IOMEGA ZIP drive, USB storage devices, Fibre | |
93c164af | 37 | Channel, and FireWire storage. |
1da177e4 LT |
38 | |
39 | To compile this driver as a module, choose M here and read | |
b7223d9b | 40 | <file:Documentation/scsi/scsi.rst>. |
1da177e4 LT |
41 | The module will be called scsi_mod. |
42 | ||
43 | However, do not compile this as a module if your root file system | |
44 | (the one containing the directory /) is located on a SCSI device. | |
45 | ||
7689e82e CH |
46 | config SCSI_DMA |
47 | bool | |
48 | default n | |
49 | ||
53dce332 FT |
50 | config SCSI_ESP_PIO |
51 | bool | |
52 | ||
84314fd4 | 53 | config SCSI_NETLINK |
2b7cbe20 | 54 | bool |
84314fd4 | 55 | default n |
5d6be6a5 | 56 | depends on NET |
84314fd4 | 57 | |
1da177e4 LT |
58 | config SCSI_PROC_FS |
59 | bool "legacy /proc/scsi/ support" | |
60 | depends on SCSI && PROC_FS | |
61 | default y | |
a7f7f624 | 62 | help |
1da177e4 | 63 | This option enables support for the various files in |
09509603 | 64 | /proc/scsi. In Linux 2.6 this has been superseded by |
1da177e4 LT |
65 | files in sysfs but many legacy applications rely on this. |
66 | ||
09509603 | 67 | If unsure say Y. |
1da177e4 LT |
68 | |
69 | comment "SCSI support type (disk, tape, CD-ROM)" | |
70 | depends on SCSI | |
71 | ||
72 | config BLK_DEV_SD | |
73 | tristate "SCSI disk support" | |
74 | depends on SCSI | |
a754bd5f | 75 | select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY |
a7f7f624 | 76 | help |
1da177e4 | 77 | If you want to use SCSI hard disks, Fibre Channel disks, |
abcdceb9 | 78 | Serial ATA (SATA) or Parallel ATA (PATA) hard disks, |
1da177e4 LT |
79 | USB storage or the SCSI or parallel port version of |
80 | the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, | |
81 | the Disk-HOWTO and the Multi-Disk-HOWTO, available from | |
82 | <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI | |
83 | CD-ROMs. | |
84 | ||
85 | To compile this driver as a module, choose M here and read | |
b7223d9b | 86 | <file:Documentation/scsi/scsi.rst>. |
1da177e4 LT |
87 | The module will be called sd_mod. |
88 | ||
89 | Do not compile this driver as a module if your root file system | |
90 | (the one containing the directory /) is located on a SCSI disk. | |
91 | In this case, do not compile the driver for your SCSI host adapter | |
92 | (below) as a module either. | |
93 | ||
94 | config CHR_DEV_ST | |
95 | tristate "SCSI tape support" | |
96 | depends on SCSI | |
a7f7f624 | 97 | help |
1da177e4 LT |
98 | If you want to use a SCSI tape drive under Linux, say Y and read the |
99 | SCSI-HOWTO, available from | |
100 | <http://www.tldp.org/docs.html#howto>, and | |
bf65c846 | 101 | <file:Documentation/scsi/st.rst> in the kernel source. This is NOT |
1da177e4 LT |
102 | for SCSI CD-ROMs. |
103 | ||
104 | To compile this driver as a module, choose M here and read | |
b7223d9b | 105 | <file:Documentation/scsi/scsi.rst>. The module will be called st. |
1da177e4 | 106 | |
1da177e4 LT |
107 | config BLK_DEV_SR |
108 | tristate "SCSI CDROM support" | |
c091fbe9 | 109 | depends on SCSI && BLK_DEV |
2a750166 | 110 | select CDROM |
a7f7f624 | 111 | help |
e7fb6d2e AC |
112 | If you want to use a CD or DVD drive attached to your computer |
113 | by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO | |
114 | and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>. | |
115 | ||
116 | Make sure to say Y or M to "ISO 9660 CD-ROM file system support". | |
1da177e4 LT |
117 | |
118 | To compile this driver as a module, choose M here and read | |
b7223d9b | 119 | <file:Documentation/scsi/scsi.rst>. |
1da177e4 LT |
120 | The module will be called sr_mod. |
121 | ||
1da177e4 LT |
122 | config CHR_DEV_SG |
123 | tristate "SCSI generic support" | |
124 | depends on SCSI | |
a7f7f624 | 125 | help |
1da177e4 LT |
126 | If you want to use SCSI scanners, synthesizers or CD-writers or just |
127 | about anything having "SCSI" in its name other than hard disks, | |
128 | CD-ROMs or tapes, say Y here. These won't be supported by the kernel | |
129 | directly, so you need some additional software which knows how to | |
130 | talk to these devices using the SCSI protocol: | |
131 | ||
631dd1a8 | 132 | For scanners, look at SANE (<http://www.sane-project.org/>). For CD |
1da177e4 | 133 | writer software look at Cdrtools |
fa17a6dc | 134 | (<http://cdrtools.sourceforge.net/>) |
1da177e4 LT |
135 | and for burning a "disk at once": CDRDAO |
136 | (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high | |
137 | quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). | |
138 | For other devices, it's possible that you'll have to write the | |
139 | driver software yourself. Please read the file | |
d4d79340 | 140 | <file:Documentation/scsi/scsi-generic.rst> for more information. |
1da177e4 LT |
141 | |
142 | To compile this driver as a module, choose M here and read | |
b7223d9b | 143 | <file:Documentation/scsi/scsi.rst>. The module will be called sg. |
1da177e4 LT |
144 | |
145 | If unsure, say N. | |
146 | ||
78011042 CH |
147 | config BLK_DEV_BSG |
148 | bool "/dev/bsg support (SG v4)" | |
149 | depends on SCSI | |
150 | default y | |
151 | help | |
152 | Saying Y here will enable generic SG (SCSI generic) v4 support | |
153 | for any SCSI device. | |
154 | ||
155 | This option is required by UDEV to access device serial numbers, etc. | |
156 | ||
157 | If unsure, say Y. | |
158 | ||
daa6eda6 GK |
159 | config CHR_DEV_SCH |
160 | tristate "SCSI media changer support" | |
161 | depends on SCSI | |
a7f7f624 | 162 | help |
daa6eda6 GK |
163 | This is a driver for SCSI media changers. Most common devices are |
164 | tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you | |
165 | don't need this for those tiny 6-slot cdrom changers. Media | |
166 | changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. | |
167 | If you have such hardware and want to use it with linux, say Y | |
731fc16c | 168 | here. Check <file:Documentation/scsi/scsi-changer.rst> for details. |
daa6eda6 GK |
169 | |
170 | If you want to compile this as a module ( = code which can be | |
171 | inserted in and removed from the running kernel whenever you want), | |
cd238eff | 172 | say M here and read <file:Documentation/kbuild/modules.rst> and |
b7223d9b | 173 | <file:Documentation/scsi/scsi.rst>. The module will be called ch.o. |
daa6eda6 | 174 | If unsure, say N. |
9927c688 JB |
175 | |
176 | config SCSI_ENCLOSURE | |
177 | tristate "SCSI Enclosure Support" | |
178 | depends on SCSI && ENCLOSURE_SERVICES | |
3f8d6f2a | 179 | depends on m || SCSI_SAS_ATTRS != m |
9927c688 JB |
180 | help |
181 | Enclosures are devices sitting on or in SCSI backplanes that | |
182 | manage devices. If you have a disk cage, the chances are that | |
183 | it has an enclosure device. Selecting this option will just allow | |
184 | certain enclosure conditions to be reported and is not required. | |
daa6eda6 | 185 | |
1da177e4 | 186 | config SCSI_CONSTANTS |
e1f0bce3 | 187 | bool "Verbose SCSI error reporting (kernel size += 36K)" |
1da177e4 LT |
188 | depends on SCSI |
189 | help | |
190 | The error messages regarding your SCSI hardware will be easier to | |
191 | understand if you say Y here; it will enlarge your kernel by about | |
e1f0bce3 | 192 | 36 KB. If in doubt, say Y. |
1da177e4 LT |
193 | |
194 | config SCSI_LOGGING | |
195 | bool "SCSI logging facility" | |
196 | depends on SCSI | |
a7f7f624 | 197 | help |
1da177e4 LT |
198 | This turns on a logging facility that can be used to debug a number |
199 | of SCSI related problems. | |
200 | ||
201 | If you say Y here, no logging output will appear by default, but you | |
202 | can enable logging by saying Y to "/proc file system support" and | |
203 | "Sysctl support" below and executing the command | |
204 | ||
5ef07416 | 205 | echo <bitmask> > /proc/sys/dev/scsi/logging_level |
1da177e4 | 206 | |
5ef07416 RL |
207 | where <bitmask> is a four byte value representing the logging type |
208 | and logging level for each type of logging selected. | |
1da177e4 | 209 | |
5ef07416 RL |
210 | There are a number of logging types and you can find them in the |
211 | source at <file:drivers/scsi/scsi_logging.h>. The logging levels | |
212 | are also described in that file and they determine the verbosity of | |
213 | the logging for each logging type. | |
1da177e4 LT |
214 | |
215 | If you say N here, it may be harder to track down some types of SCSI | |
216 | problems. If you say Y here your kernel will be somewhat larger, but | |
217 | there should be no noticeable performance impact as long as you have | |
218 | logging turned off. | |
219 | ||
21db1882 MW |
220 | config SCSI_SCAN_ASYNC |
221 | bool "Asynchronous SCSI scanning" | |
222 | depends on SCSI | |
223 | help | |
224 | The SCSI subsystem can probe for devices while the rest of the | |
225 | system continues booting, and even probe devices on different | |
226 | busses in parallel, leading to a significant speed-up. | |
082f6f9d | 227 | |
082f6f9d MW |
228 | You can override this choice by specifying "scsi_mod.scan=sync" |
229 | or async on the kernel's command line. | |
21db1882 | 230 | |
3c31b52f DW |
231 | Note that this setting also affects whether resuming from |
232 | system suspend will be performed asynchronously. | |
233 | ||
2908d778 | 234 | menu "SCSI Transports" |
1da177e4 LT |
235 | depends on SCSI |
236 | ||
237 | config SCSI_SPI_ATTRS | |
238 | tristate "Parallel SCSI (SPI) Transport Attributes" | |
239 | depends on SCSI | |
240 | help | |
241 | If you wish to export transport-specific information about | |
242 | each attached SCSI device to sysfs, say Y. Otherwise, say N. | |
243 | ||
244 | config SCSI_FC_ATTRS | |
245 | tristate "FiberChannel Transport Attributes" | |
95cd6f48 | 246 | depends on SCSI && NET |
c00da4c9 | 247 | select BLK_DEV_BSGLIB |
84314fd4 | 248 | select SCSI_NETLINK |
1da177e4 LT |
249 | help |
250 | If you wish to export transport-specific information about | |
251 | each attached FiberChannel device to sysfs, say Y. | |
252 | Otherwise, say N. | |
253 | ||
254 | config SCSI_ISCSI_ATTRS | |
255 | tristate "iSCSI Transport Attributes" | |
c899e4ef | 256 | depends on SCSI && NET |
90eeb01a | 257 | select BLK_DEV_BSGLIB |
1da177e4 LT |
258 | help |
259 | If you wish to export transport-specific information about | |
260 | each attached iSCSI device to sysfs, say Y. | |
261 | Otherwise, say N. | |
262 | ||
c7ebbbce CH |
263 | config SCSI_SAS_ATTRS |
264 | tristate "SAS Transport Attributes" | |
47259658 | 265 | depends on SCSI |
580b71e9 | 266 | select BLK_DEV_BSGLIB |
c7ebbbce CH |
267 | help |
268 | If you wish to export transport-specific information about | |
269 | each attached SAS device to sysfs, say Y. | |
270 | ||
2908d778 JB |
271 | source "drivers/scsi/libsas/Kconfig" |
272 | ||
09345f65 FT |
273 | config SCSI_SRP_ATTRS |
274 | tristate "SRP Transport Attributes" | |
0012fdf9 | 275 | depends on SCSI |
09345f65 FT |
276 | help |
277 | If you wish to export transport-specific information about | |
278 | each attached SRP device to sysfs, say Y. | |
279 | ||
1da177e4 LT |
280 | endmenu |
281 | ||
fc6e740d JE |
282 | menuconfig SCSI_LOWLEVEL |
283 | bool "SCSI low-level drivers" | |
1da177e4 | 284 | depends on SCSI!=n |
fc6e740d JE |
285 | default y |
286 | ||
67951f63 | 287 | if SCSI_LOWLEVEL && SCSI |
1da177e4 | 288 | |
c899e4ef AA |
289 | config ISCSI_TCP |
290 | tristate "iSCSI Initiator over TCP/IP" | |
96bad874 | 291 | depends on SCSI && INET |
c899e4ef AA |
292 | select CRYPTO |
293 | select CRYPTO_MD5 | |
294 | select CRYPTO_CRC32C | |
96bad874 | 295 | select SCSI_ISCSI_ATTRS |
c899e4ef AA |
296 | help |
297 | The iSCSI Driver provides a host with the ability to access storage | |
298 | through an IP network. The driver uses the iSCSI protocol to transport | |
299 | SCSI requests and responses over a TCP/IP network between the host | |
300 | (the "initiator") and "targets". Architecturally, the iSCSI driver | |
301 | combines with the host's TCP/IP stack, network drivers, and Network | |
302 | Interface Card (NIC) to provide the same functions as a SCSI or a | |
303 | Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). | |
304 | ||
305 | To compile this driver as a module, choose M here: the | |
306 | module will be called iscsi_tcp. | |
307 | ||
308 | The userspace component needed to initialize the driver, documentation, | |
309 | and sample configuration files can be found here: | |
310 | ||
bca1088a | 311 | http://open-iscsi.org |
c899e4ef | 312 | |
aab7a8fd MC |
313 | config ISCSI_BOOT_SYSFS |
314 | tristate "iSCSI Boot Sysfs Interface" | |
315 | default n | |
316 | help | |
317 | This option enables support for exposing iSCSI boot information | |
318 | via sysfs to userspace. If you wish to export this information, | |
319 | say Y. Otherwise, say N. | |
320 | ||
7b36b6e0 | 321 | source "drivers/scsi/cxgbi/Kconfig" |
cf4e6363 | 322 | source "drivers/scsi/bnx2i/Kconfig" |
853e2bd2 | 323 | source "drivers/scsi/bnx2fc/Kconfig" |
6733b39a | 324 | source "drivers/scsi/be2iscsi/Kconfig" |
c21e0bbf | 325 | source "drivers/scsi/cxlflash/Kconfig" |
c3673464 | 326 | |
1da177e4 LT |
327 | config SGIWD93_SCSI |
328 | tristate "SGI WD93C93 SCSI Driver" | |
2adbfa33 | 329 | depends on SGI_HAS_WD93 && SCSI |
98f92dff | 330 | help |
1da177e4 LT |
331 | If you have a Western Digital WD93 SCSI controller on |
332 | an SGI MIPS system, say Y. Otherwise, say N. | |
333 | ||
1da177e4 LT |
334 | config BLK_DEV_3W_XXXX_RAID |
335 | tristate "3ware 5/6/7/8xxx ATA-RAID support" | |
336 | depends on PCI && SCSI | |
337 | help | |
338 | 3ware is the only hardware ATA-Raid product in Linux to date. | |
339 | This card is 2,4, or 8 channel master mode support only. | |
340 | SCSI support required!!! | |
341 | ||
342 | <http://www.3ware.com/> | |
343 | ||
344 | Please read the comments at the top of | |
345 | <file:drivers/scsi/3w-xxxx.c>. | |
346 | ||
edd16368 SC |
347 | config SCSI_HPSA |
348 | tristate "HP Smart Array SCSI driver" | |
349 | depends on PCI && SCSI | |
0fc9fd40 | 350 | select CHECK_SIGNATURE |
653cfb85 | 351 | select SCSI_SAS_ATTRS |
edd16368 SC |
352 | help |
353 | This driver supports HP Smart Array Controllers (circa 2009). | |
354 | It is a SCSI alternative to the cciss driver, which is a block | |
355 | driver. Anyone wishing to use HP Smart Array controllers who | |
356 | would prefer the devices be presented to linux as SCSI devices, | |
357 | rather than as generic block devices should say Y here. | |
358 | ||
1da177e4 LT |
359 | config SCSI_3W_9XXX |
360 | tristate "3ware 9xxx SATA-RAID support" | |
361 | depends on PCI && SCSI | |
362 | help | |
363 | This driver supports the 9000 series 3ware SATA-RAID cards. | |
364 | ||
365 | <http://www.amcc.com> | |
366 | ||
367 | Please read the comments at the top of | |
368 | <file:drivers/scsi/3w-9xxx.c>. | |
369 | ||
f619106b | 370 | config SCSI_3W_SAS |
371 | tristate "3ware 97xx SAS/SATA-RAID support" | |
372 | depends on PCI && SCSI | |
373 | help | |
374 | This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards. | |
375 | ||
376 | <http://www.lsi.com> | |
377 | ||
378 | Please read the comments at the top of | |
379 | <file:drivers/scsi/3w-sas.c>. | |
380 | ||
1da177e4 LT |
381 | config SCSI_ACARD |
382 | tristate "ACARD SCSI support" | |
383 | depends on PCI && SCSI | |
384 | help | |
385 | This driver supports the ACARD SCSI host adapter. | |
386 | Support Chip <ATP870 ATP876 ATP880 ATP885> | |
387 | To compile this driver as a module, choose M here: the | |
388 | module will be called atp870u. | |
389 | ||
390 | config SCSI_AHA152X | |
391 | tristate "Adaptec AHA152X/2825 support" | |
fa7250d6 | 392 | depends on ISA && SCSI |
410ca5c7 | 393 | select SCSI_SPI_ATTRS |
928923c7 | 394 | select CHECK_SIGNATURE |
a7f7f624 | 395 | help |
1da177e4 LT |
396 | This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 |
397 | SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. | |
398 | must be manually specified in this case. | |
399 | ||
400 | It is explained in section 3.3 of the SCSI-HOWTO, available from | |
401 | <http://www.tldp.org/docs.html#howto>. You might also want to | |
94b5530f | 402 | read the file <file:Documentation/scsi/aha152x.rst>. |
1da177e4 LT |
403 | |
404 | To compile this driver as a module, choose M here: the | |
405 | module will be called aha152x. | |
406 | ||
407 | config SCSI_AHA1542 | |
408 | tristate "Adaptec AHA1542 support" | |
a5532606 | 409 | depends on ISA && SCSI && ISA_DMA_API |
a7f7f624 | 410 | help |
1da177e4 LT |
411 | This is support for a SCSI host adapter. It is explained in section |
412 | 3.4 of the SCSI-HOWTO, available from | |
413 | <http://www.tldp.org/docs.html#howto>. Note that Trantor was | |
414 | purchased by Adaptec, and some former Trantor products are being | |
415 | sold under the Adaptec name. If it doesn't work out of the box, you | |
416 | may have to change some settings in <file:drivers/scsi/aha1542.h>. | |
417 | ||
418 | To compile this driver as a module, choose M here: the | |
419 | module will be called aha1542. | |
420 | ||
421 | config SCSI_AHA1740 | |
422 | tristate "Adaptec AHA1740 support" | |
423 | depends on EISA && SCSI | |
a7f7f624 | 424 | help |
1da177e4 LT |
425 | This is support for a SCSI host adapter. It is explained in section |
426 | 3.5 of the SCSI-HOWTO, available from | |
427 | <http://www.tldp.org/docs.html#howto>. If it doesn't work out | |
428 | of the box, you may have to change some settings in | |
429 | <file:drivers/scsi/aha1740.h>. | |
430 | ||
431 | To compile this driver as a module, choose M here: the | |
432 | module will be called aha1740. | |
433 | ||
434 | config SCSI_AACRAID | |
435 | tristate "Adaptec AACRAID support" | |
436 | depends on SCSI && PCI | |
8075f21f AB |
437 | help |
438 | This driver supports a variety of Dell, HP, Adaptec, IBM and | |
439 | ICP storage products. For a list of supported products, refer | |
dd9cc144 | 440 | to <file:Documentation/scsi/aacraid.rst>. |
8075f21f AB |
441 | |
442 | To compile this driver as a module, choose M here: the module | |
443 | will be called aacraid. | |
444 | ||
1da177e4 LT |
445 | |
446 | source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" | |
1da177e4 | 447 | source "drivers/scsi/aic7xxx/Kconfig.aic79xx" |
2908d778 | 448 | source "drivers/scsi/aic94xx/Kconfig" |
e8899fad | 449 | source "drivers/scsi/hisi_sas/Kconfig" |
2ad52f47 | 450 | source "drivers/scsi/mvsas/Kconfig" |
1da177e4 | 451 | |
f0c568a4 JL |
452 | config SCSI_MVUMI |
453 | tristate "Marvell UMI driver" | |
454 | depends on SCSI && PCI | |
455 | help | |
456 | Module for Marvell Universal Message Interface(UMI) driver | |
457 | ||
458 | To compile this driver as a module, choose M here: the | |
459 | module will be called mvumi. | |
460 | ||
1da177e4 LT |
461 | config SCSI_DPT_I2O |
462 | tristate "Adaptec I2O RAID support " | |
62ac5aed | 463 | depends on SCSI && PCI && VIRT_TO_BUS |
1da177e4 LT |
464 | help |
465 | This driver supports all of Adaptec's I2O based RAID controllers as | |
466 | well as the DPT SmartRaid V cards. This is an Adaptec maintained | |
f2297840 | 467 | driver by Deanna Bonds. See <file:Documentation/scsi/dpti.rst>. |
1da177e4 LT |
468 | |
469 | To compile this driver as a module, choose M here: the | |
470 | module will be called dpt_i2o. | |
471 | ||
472 | config SCSI_ADVANSYS | |
473 | tristate "AdvanSys SCSI support" | |
6571fb3f | 474 | depends on SCSI |
4661e3ea | 475 | depends on ISA || EISA || PCI |
2b8bbdb9 | 476 | depends on ISA_DMA_API || !ISA |
1da177e4 LT |
477 | help |
478 | This is a driver for all SCSI host adapters manufactured by | |
479 | AdvanSys. It is documented in the kernel source in | |
480 | <file:drivers/scsi/advansys.c>. | |
481 | ||
482 | To compile this driver as a module, choose M here: the | |
483 | module will be called advansys. | |
484 | ||
1c57e86d | 485 | config SCSI_ARCMSR |
1a4f550a | 486 | tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter" |
1c57e86d EC |
487 | depends on PCI && SCSI |
488 | help | |
1a4f550a | 489 | This driver supports all of ARECA's SATA/SAS RAID controller cards. |
1c57e86d | 490 | This is an ARECA-maintained driver by Erich Chen. |
1a4f550a | 491 | If you have any problems, please mail to: <erich@areca.com.tw>. |
1c57e86d | 492 | Areca supports Linux RAID config tools. |
1a4f550a | 493 | Please link <http://www.areca.com.tw> |
1c57e86d EC |
494 | |
495 | To compile this driver as a module, choose M here: the | |
496 | module will be called arcmsr (modprobe arcmsr). | |
497 | ||
26780d9e | 498 | source "drivers/scsi/esas2r/Kconfig" |
1da177e4 | 499 | source "drivers/scsi/megaraid/Kconfig.megaraid" |
f92363d1 | 500 | source "drivers/scsi/mpt3sas/Kconfig" |
c4f7ac64 | 501 | source "drivers/scsi/mpi3mr/Kconfig" |
6c223761 | 502 | source "drivers/scsi/smartpqi/Kconfig" |
7a3e97b0 | 503 | source "drivers/scsi/ufs/Kconfig" |
1da177e4 | 504 | |
ede1e6f8 | 505 | config SCSI_HPTIOP |
00f59701 | 506 | tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" |
ede1e6f8 HLT |
507 | depends on SCSI && PCI |
508 | help | |
00f59701 | 509 | This option enables support for HighPoint RocketRAID 3xxx/4xxx |
ede1e6f8 HLT |
510 | controllers. |
511 | ||
512 | To compile this driver as a module, choose M here; the module | |
513 | will be called hptiop. If unsure, say N. | |
1da177e4 | 514 | |
1da177e4 LT |
515 | config SCSI_BUSLOGIC |
516 | tristate "BusLogic SCSI support" | |
8cad3b66 | 517 | depends on PCI && SCSI && VIRT_TO_BUS |
a7f7f624 | 518 | help |
1da177e4 LT |
519 | This is support for BusLogic MultiMaster and FlashPoint SCSI Host |
520 | Adapters. Consult the SCSI-HOWTO, available from | |
521 | <http://www.tldp.org/docs.html#howto>, and the files | |
977b899c | 522 | <file:Documentation/scsi/BusLogic.rst> and |
cc0d9d3a | 523 | <file:Documentation/scsi/FlashPoint.rst> for more information. |
78b4b05d MW |
524 | Note that support for FlashPoint is only available for 32-bit |
525 | x86 configurations. | |
1da177e4 LT |
526 | |
527 | To compile this driver as a module, choose M here: the | |
528 | module will be called BusLogic. | |
529 | ||
78b4b05d MW |
530 | config SCSI_FLASHPOINT |
531 | bool "FlashPoint support" | |
391e2f25 | 532 | depends on SCSI_BUSLOGIC && PCI |
1da177e4 | 533 | help |
78b4b05d | 534 | This option allows you to add FlashPoint support to the |
1da177e4 | 535 | BusLogic SCSI driver. The FlashPoint SCCB Manager code is |
78b4b05d MW |
536 | substantial, so users of MultiMaster Host Adapters may not |
537 | wish to include it. | |
1da177e4 | 538 | |
081ff398 HR |
539 | config SCSI_MYRB |
540 | tristate "Mylex DAC960/DAC1100 PCI RAID Controller (Block Interface)" | |
541 | depends on PCI | |
542 | select RAID_ATTRS | |
543 | help | |
544 | This driver adds support for the Mylex DAC960, AcceleRAID, and | |
545 | eXtremeRAID PCI RAID controllers. This driver supports the | |
546 | older, block based interface. | |
547 | This driver is a reimplementation of the original DAC960 | |
548 | driver. If you have used the DAC960 driver you should enable | |
549 | this module. | |
550 | ||
551 | To compile this driver as a module, choose M here: the | |
552 | module will be called myrb. | |
553 | ||
77266186 HR |
554 | config SCSI_MYRS |
555 | tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)" | |
556 | depends on PCI | |
a3ecf482 | 557 | depends on !CPU_BIG_ENDIAN || COMPILE_TEST |
77266186 HR |
558 | select RAID_ATTRS |
559 | help | |
560 | This driver adds support for the Mylex DAC960, AcceleRAID, and | |
561 | eXtremeRAID PCI RAID controllers. This driver supports the | |
562 | newer, SCSI-based interface only. | |
563 | This driver is a reimplementation of the original DAC960 | |
564 | driver. If you have used the DAC960 driver you should enable | |
565 | this module. | |
566 | ||
567 | To compile this driver as a module, choose M here: the | |
568 | module will be called myrs. | |
569 | ||
851b1642 AK |
570 | config VMWARE_PVSCSI |
571 | tristate "VMware PVSCSI driver support" | |
572 | depends on PCI && SCSI && X86 | |
573 | help | |
574 | This driver supports VMware's para virtualized SCSI HBA. | |
575 | To compile this driver as a module, choose M here: the | |
576 | module will be called vmw_pvscsi. | |
577 | ||
8beb8d4c JG |
578 | config XEN_SCSI_FRONTEND |
579 | tristate "XEN SCSI frontend driver" | |
580 | depends on SCSI && XEN | |
8ab85eba | 581 | select XEN_XENBUS_FRONTEND |
8beb8d4c JG |
582 | help |
583 | The XEN SCSI frontend driver allows the kernel to access SCSI Devices | |
584 | within another guest OS (usually Dom0). | |
585 | Only needed if the kernel is running in a XEN guest and generic | |
586 | SCSI access to a device is needed. | |
587 | ||
89ae7d70 S |
588 | config HYPERV_STORAGE |
589 | tristate "Microsoft Hyper-V virtual storage driver" | |
590 | depends on SCSI && HYPERV | |
8063d56e | 591 | depends on m || SCSI_FC_ATTRS != m |
89ae7d70 S |
592 | default HYPERV |
593 | help | |
594 | Select this option to enable the Hyper-V virtual storage driver. | |
595 | ||
42e9a92f RL |
596 | config LIBFC |
597 | tristate "LibFC module" | |
6a38792c | 598 | depends on SCSI_FC_ATTRS |
d943aeeb | 599 | select CRC32 |
a7f7f624 | 600 | help |
42e9a92f RL |
601 | Fibre Channel library module |
602 | ||
9b34ecff VD |
603 | config LIBFCOE |
604 | tristate "LibFCoE module" | |
df568d8e | 605 | depends on LIBFC |
a7f7f624 | 606 | help |
9b34ecff VD |
607 | Library for Fibre Channel over Ethernet module |
608 | ||
85b4aa49 RL |
609 | config FCOE |
610 | tristate "FCoE module" | |
fb5edd02 | 611 | depends on PCI |
df568d8e | 612 | depends on LIBFCOE |
a7f7f624 | 613 | help |
85b4aa49 RL |
614 | Fibre Channel over Ethernet module |
615 | ||
5df6d737 AJ |
616 | config FCOE_FNIC |
617 | tristate "Cisco FNIC Driver" | |
618 | depends on PCI && X86 | |
df568d8e | 619 | depends on LIBFCOE |
5df6d737 AJ |
620 | help |
621 | This is support for the Cisco PCI-Express FCoE HBA. | |
622 | ||
623 | To compile this driver as a module, choose M here and read | |
b7223d9b | 624 | <file:Documentation/scsi/scsi.rst>. |
5df6d737 AJ |
625 | The module will be called fnic. |
626 | ||
c8806b6c NM |
627 | config SCSI_SNIC |
628 | tristate "Cisco SNIC Driver" | |
629 | depends on PCI && SCSI | |
630 | help | |
631 | This is support for the Cisco PCI-Express SCSI HBA. | |
632 | ||
633 | To compile this driver as a module, choose M here and read | |
b7223d9b | 634 | <file:Documentation/scsi/scsi.rst>. |
c8806b6c NM |
635 | The module will be called snic. |
636 | ||
637 | config SCSI_SNIC_DEBUG_FS | |
638 | bool "Cisco SNIC Driver Debugfs Support" | |
639 | depends on SCSI_SNIC && DEBUG_FS | |
640 | help | |
641 | This enables to list debugging information from SNIC Driver | |
642 | available via debugfs file system | |
643 | ||
1da177e4 LT |
644 | config SCSI_DMX3191D |
645 | tristate "DMX3191D SCSI support" | |
646 | depends on PCI && SCSI | |
410ca5c7 | 647 | select SCSI_SPI_ATTRS |
1da177e4 LT |
648 | help |
649 | This is support for Domex DMX3191D SCSI Host Adapters. | |
650 | ||
651 | To compile this driver as a module, choose M here: the | |
652 | module will be called dmx3191d. | |
653 | ||
ebeb4665 OZ |
654 | config SCSI_FDOMAIN |
655 | tristate | |
656 | depends on SCSI | |
657 | ||
68046d50 OZ |
658 | config SCSI_FDOMAIN_PCI |
659 | tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support" | |
660 | depends on PCI && SCSI | |
661 | select SCSI_FDOMAIN | |
662 | help | |
663 | This is support for Future Domain's PCI SCSI host adapters (TMC-3260) | |
664 | and other adapters with PCI bus based on the Future Domain chipsets | |
665 | (Adaptec AHA-2920A). | |
666 | ||
667 | NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip | |
668 | and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI | |
669 | controller support"). This Future Domain driver works with the older | |
670 | Adaptec AHA-2920A boards with a Future Domain chip on them. | |
671 | ||
672 | To compile this driver as a module, choose M here: the | |
673 | module will be called fdomain_pci. | |
674 | ||
e5207cf0 OZ |
675 | config SCSI_FDOMAIN_ISA |
676 | tristate "Future Domain 16xx ISA SCSI support" | |
677 | depends on ISA && SCSI | |
678 | select CHECK_SIGNATURE | |
679 | select SCSI_FDOMAIN | |
680 | help | |
681 | This is support for Future Domain's 16-bit SCSI host adapters | |
682 | (TMC-1660/1680, TMC-1650/1670, TMC-1610M/MER/MEX) and other adapters | |
683 | with ISA bus based on the Future Domain chipsets (Quantum ISA-200S, | |
684 | ISA-250MG; and at least one IBM board). | |
685 | ||
686 | To compile this driver as a module, choose M here: the | |
687 | module will be called fdomain_isa. | |
688 | ||
6f231dda DW |
689 | config SCSI_ISCI |
690 | tristate "Intel(R) C600 Series Chipset SAS Controller" | |
691 | depends on PCI && SCSI | |
6f231dda | 692 | depends on X86 |
6f231dda | 693 | select SCSI_SAS_LIBSAS |
a7f7f624 | 694 | help |
6f231dda DW |
695 | This driver supports the 6Gb/s SAS capabilities of the storage |
696 | control unit found in the Intel(R) C600 series chipset. | |
697 | ||
1da177e4 | 698 | config SCSI_GENERIC_NCR5380 |
b61bacbc | 699 | tristate "Generic NCR5380/53c400 SCSI ISA card support" |
c1f7cf0a | 700 | depends on ISA && SCSI && HAS_IOPORT_MAP |
410ca5c7 | 701 | select SCSI_SPI_ATTRS |
a7f7f624 | 702 | help |
b61bacbc OZ |
703 | This is a driver for old ISA card SCSI controllers based on a |
704 | NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device. | |
705 | Most boards such as the Trantor T130 fit this category, as do | |
706 | various 8-bit and 16-bit ISA cards bundled with SCSI scanners. | |
1da177e4 LT |
707 | |
708 | To compile this driver as a module, choose M here: the | |
709 | module will be called g_NCR5380. | |
710 | ||
1da177e4 LT |
711 | config SCSI_IPS |
712 | tristate "IBM ServeRAID support" | |
713 | depends on PCI && SCSI | |
a7f7f624 | 714 | help |
1da177e4 LT |
715 | This is support for the IBM ServeRAID hardware RAID controllers. |
716 | See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> | |
631dd1a8 | 717 | and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> |
1da177e4 LT |
718 | for more information. If this driver does not work correctly |
719 | without modification please contact the author by email at | |
720 | <ipslinux@adaptec.com>. | |
721 | ||
722 | To compile this driver as a module, choose M here: the | |
723 | module will be called ips. | |
724 | ||
725 | config SCSI_IBMVSCSI | |
726 | tristate "IBM Virtual SCSI support" | |
7834799a | 727 | depends on PPC_PSERIES |
4d680419 | 728 | select SCSI_SRP_ATTRS |
1da177e4 LT |
729 | help |
730 | This is the IBM POWER Virtual SCSI Client | |
731 | ||
732 | To compile this driver as a module, choose M here: the | |
46beb54d | 733 | module will be called ibmvscsi. |
1da177e4 | 734 | |
88a678bb BL |
735 | config SCSI_IBMVSCSIS |
736 | tristate "IBM Virtual SCSI Server support" | |
737 | depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI | |
738 | help | |
739 | This is the IBM POWER Virtual SCSI Target Server | |
83fc61a5 | 740 | This driver uses the SRP protocol for communication between servers |
88a678bb BL |
741 | guest and/or the host that run on the same server. |
742 | More information on VSCSI protocol can be found at www.power.org | |
743 | ||
744 | The userspace configuration needed to initialize the driver can be | |
745 | be found here: | |
746 | ||
747 | https://github.com/powervm/ibmvscsis/wiki/Configuration | |
748 | ||
749 | To compile this driver as a module, choose M here: the | |
750 | module will be called ibmvscsis. | |
751 | ||
072b91f9 BK |
752 | config SCSI_IBMVFC |
753 | tristate "IBM Virtual FC support" | |
754 | depends on PPC_PSERIES && SCSI | |
6a38792c | 755 | depends on SCSI_FC_ATTRS |
072b91f9 BK |
756 | help |
757 | This is the IBM POWER Virtual FC Client | |
758 | ||
759 | To compile this driver as a module, choose M here: the | |
760 | module will be called ibmvfc. | |
761 | ||
762 | config SCSI_IBMVFC_TRACE | |
763 | bool "enable driver internal trace" | |
764 | depends on SCSI_IBMVFC | |
765 | default y | |
766 | help | |
767 | If you say Y here, the driver will trace all commands issued | |
768 | to the adapter. Performance impact is minimal. Trace can be | |
769 | dumped using /sys/class/scsi_host/hostXX/trace. | |
770 | ||
1da177e4 LT |
771 | config SCSI_INITIO |
772 | tristate "Initio 9100U(W) support" | |
773 | depends on PCI && SCSI | |
774 | help | |
775 | This is support for the Initio 91XXU(W) SCSI host adapter. Please | |
776 | read the SCSI-HOWTO, available from | |
777 | <http://www.tldp.org/docs.html#howto>. | |
778 | ||
779 | To compile this driver as a module, choose M here: the | |
780 | module will be called initio. | |
781 | ||
782 | config SCSI_INIA100 | |
783 | tristate "Initio INI-A100U2W support" | |
784 | depends on PCI && SCSI | |
785 | help | |
786 | This is support for the Initio INI-A100U2W SCSI host adapter. | |
787 | Please read the SCSI-HOWTO, available from | |
788 | <http://www.tldp.org/docs.html#howto>. | |
789 | ||
790 | To compile this driver as a module, choose M here: the | |
791 | module will be called a100u2w. | |
792 | ||
793 | config SCSI_PPA | |
794 | tristate "IOMEGA parallel port (ppa - older drives)" | |
6a19b41b | 795 | depends on SCSI && PARPORT_PC |
a7f7f624 | 796 | help |
1da177e4 LT |
797 | This driver supports older versions of IOMEGA's parallel port ZIP |
798 | drive (a 100 MB removable media device). | |
799 | ||
800 | Note that you can say N here if you have the SCSI version of the ZIP | |
801 | drive: it will be supported automatically if you said Y to the | |
802 | generic "SCSI disk support", above. | |
803 | ||
804 | If you have the ZIP Plus drive or a more recent parallel port ZIP | |
805 | drive (if the supplied cable with the drive is labeled "AutoDetect") | |
806 | then you should say N here and Y to "IOMEGA parallel port (imm - | |
807 | newer drives)", below. | |
808 | ||
809 | For more information about this driver and how to use it you should | |
304a8b62 | 810 | read the file <file:Documentation/scsi/ppa.rst>. You should also read |
1da177e4 LT |
811 | the SCSI-HOWTO, which is available from |
812 | <http://www.tldp.org/docs.html#howto>. If you use this driver, | |
813 | you will still be able to use the parallel port for other tasks, | |
814 | such as a printer; it is safe to compile both drivers into the | |
815 | kernel. | |
816 | ||
817 | To compile this driver as a module, choose M here: the | |
818 | module will be called ppa. | |
819 | ||
820 | config SCSI_IMM | |
821 | tristate "IOMEGA parallel port (imm - newer drives)" | |
6a19b41b | 822 | depends on SCSI && PARPORT_PC |
a7f7f624 | 823 | help |
1da177e4 LT |
824 | This driver supports newer versions of IOMEGA's parallel port ZIP |
825 | drive (a 100 MB removable media device). | |
826 | ||
827 | Note that you can say N here if you have the SCSI version of the ZIP | |
828 | drive: it will be supported automatically if you said Y to the | |
829 | generic "SCSI disk support", above. | |
830 | ||
831 | If you have the ZIP Plus drive or a more recent parallel port ZIP | |
832 | drive (if the supplied cable with the drive is labeled "AutoDetect") | |
833 | then you should say Y here; if you have an older ZIP drive, say N | |
834 | here and Y to "IOMEGA Parallel Port (ppa - older drives)", above. | |
835 | ||
836 | For more information about this driver and how to use it you should | |
304a8b62 | 837 | read the file <file:Documentation/scsi/ppa.rst>. You should also read |
1da177e4 LT |
838 | the SCSI-HOWTO, which is available from |
839 | <http://www.tldp.org/docs.html#howto>. If you use this driver, | |
840 | you will still be able to use the parallel port for other tasks, | |
841 | such as a printer; it is safe to compile both drivers into the | |
842 | kernel. | |
843 | ||
844 | To compile this driver as a module, choose M here: the | |
845 | module will be called imm. | |
846 | ||
847 | config SCSI_IZIP_EPP16 | |
848 | bool "ppa/imm option - Use slow (but safe) EPP-16" | |
6a19b41b | 849 | depends on SCSI_PPA || SCSI_IMM |
a7f7f624 | 850 | help |
1da177e4 LT |
851 | EPP (Enhanced Parallel Port) is a standard for parallel ports which |
852 | allows them to act as expansion buses that can handle up to 64 | |
853 | peripheral devices. | |
854 | ||
855 | Some parallel port chipsets are slower than their motherboard, and | |
856 | so we have to control the state of the chipset's FIFO queue every | |
857 | now and then to avoid data loss. This will be done if you say Y | |
858 | here. | |
859 | ||
860 | Generally, saying Y is the safe option and slows things down a bit. | |
861 | ||
862 | config SCSI_IZIP_SLOW_CTR | |
863 | bool "ppa/imm option - Assume slow parport control register" | |
6a19b41b | 864 | depends on SCSI_PPA || SCSI_IMM |
1da177e4 LT |
865 | help |
866 | Some parallel ports are known to have excessive delays between | |
867 | changing the parallel port control register and good data being | |
868 | available on the parallel port data/status register. This option | |
869 | forces a small delay (1.0 usec to be exact) after changing the | |
870 | control register to let things settle out. Enabling this option may | |
871 | result in a big drop in performance but some very old parallel ports | |
872 | (found in 386 vintage machines) will not work properly. | |
873 | ||
874 | Generally, saying N is fine. | |
875 | ||
1da177e4 LT |
876 | config SCSI_LASI700 |
877 | tristate "HP Lasi SCSI support for 53c700/710" | |
878 | depends on GSC && SCSI | |
879 | select SCSI_SPI_ATTRS | |
880 | help | |
881 | This is a driver for the SCSI controller in the Lasi chip found in | |
882 | many PA-RISC workstations & servers. If you do not know whether you | |
883 | have a Lasi chip, it is safe to say "Y" here. | |
884 | ||
c27d85f3 TB |
885 | config SCSI_SNI_53C710 |
886 | tristate "SNI RM SCSI support for 53c710" | |
887 | depends on SNI_RM && SCSI | |
888 | select SCSI_SPI_ATTRS | |
889 | select 53C700_LE_ON_BE | |
890 | help | |
891 | This is a driver for the onboard SCSI controller found in older | |
892 | SNI RM workstations & servers. | |
893 | ||
1da177e4 LT |
894 | config 53C700_LE_ON_BE |
895 | bool | |
8cbf0c17 | 896 | depends on SCSI_LASI700 || SCSI_SNI_53C710 |
1da177e4 LT |
897 | default y |
898 | ||
5a25ba16 JG |
899 | config SCSI_STEX |
900 | tristate "Promise SuperTrak EX Series support" | |
901 | depends on PCI && SCSI | |
a7f7f624 | 902 | help |
ee926b27 EL |
903 | This driver supports Promise SuperTrak EX series storage controllers. |
904 | ||
905 | Promise provides Linux RAID configuration utility for these | |
906 | controllers. Please visit <http://www.promise.com> to download. | |
907 | ||
908 | To compile this driver as a module, choose M here: the | |
909 | module will be called stex. | |
5a25ba16 | 910 | |
63273134 KJ |
911 | config 53C700_BE_BUS |
912 | bool | |
45804fbb | 913 | depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI |
63273134 KJ |
914 | default y |
915 | ||
1da177e4 LT |
916 | config SCSI_SYM53C8XX_2 |
917 | tristate "SYM53C8XX Version 2 SCSI support" | |
918 | depends on PCI && SCSI | |
919 | select SCSI_SPI_ATTRS | |
a7f7f624 | 920 | help |
1da177e4 LT |
921 | This driver supports the whole NCR53C8XX/SYM53C8XX family of |
922 | PCI-SCSI controllers. It also supports the subset of LSI53C10XX | |
923 | Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS | |
924 | language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI | |
925 | controllers; you need to use the Fusion MPT driver for that. | |
926 | ||
f02e84d2 | 927 | Please read <file:Documentation/scsi/sym53c8xx_2.rst> for more |
1da177e4 LT |
928 | information. |
929 | ||
930 | config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE | |
931 | int "DMA addressing mode" | |
932 | depends on SCSI_SYM53C8XX_2 | |
933 | default "1" | |
a7f7f624 | 934 | help |
1da177e4 LT |
935 | This option only applies to PCI-SCSI chips that are PCI DAC |
936 | capable (875A, 895A, 896, 1010-33, 1010-66, 1000). | |
937 | ||
938 | When set to 0, the driver will program the chip to only perform | |
939 | 32-bit DMA. When set to 1, the chip will be able to perform DMA | |
940 | to addresses up to 1TB. When set to 2, the driver supports the | |
941 | full 64-bit DMA address range, but can only address 16 segments | |
942 | of 4 GB each. This limits the total addressable range to 64 GB. | |
943 | ||
944 | Most machines with less than 4GB of memory should use a setting | |
945 | of 0 for best performance. If your machine has 4GB of memory | |
946 | or more, you should set this option to 1 (the default). | |
947 | ||
948 | The still experimental value 2 (64 bit DMA addressing with 16 | |
949 | x 4GB segments limitation) can be used on systems that require | |
950 | PCI address bits past bit 39 to be set for the addressing of | |
951 | memory using PCI DAC cycles. | |
952 | ||
953 | config SCSI_SYM53C8XX_DEFAULT_TAGS | |
1f61d824 | 954 | int "Default tagged command queue depth" |
1da177e4 LT |
955 | depends on SCSI_SYM53C8XX_2 |
956 | default "16" | |
957 | help | |
958 | This is the default value of the command queue depth the | |
959 | driver will announce to the generic SCSI layer for devices | |
960 | that support tagged command queueing. This value can be changed | |
961 | from the boot command line. This is a soft limit that cannot | |
962 | exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS. | |
963 | ||
964 | config SCSI_SYM53C8XX_MAX_TAGS | |
1f61d824 | 965 | int "Maximum number of queued commands" |
1da177e4 LT |
966 | depends on SCSI_SYM53C8XX_2 |
967 | default "64" | |
968 | help | |
969 | This option allows you to specify the maximum number of commands | |
970 | that can be queued to any device, when tagged command queuing is | |
971 | possible. The driver supports up to 256 queued commands per device. | |
972 | This value is used as a compiled-in hard limit. | |
973 | ||
1f61d824 MW |
974 | config SCSI_SYM53C8XX_MMIO |
975 | bool "Use memory mapped IO" | |
1da177e4 | 976 | depends on SCSI_SYM53C8XX_2 |
1f61d824 | 977 | default y |
1da177e4 | 978 | help |
1f61d824 MW |
979 | Memory mapped IO is faster than Port IO. Most people should |
980 | answer Y here, but some machines may have problems. If you have | |
981 | to answer N here, please report the problem to the maintainer. | |
1da177e4 LT |
982 | |
983 | config SCSI_IPR | |
984 | tristate "IBM Power Linux RAID adapter support" | |
35a39691 | 985 | depends on PCI && SCSI && ATA |
bd322af1 | 986 | select SATA_HOST |
1da177e4 | 987 | select FW_LOADER |
511cbce2 | 988 | select IRQ_POLL |
f95dc1bb | 989 | select SGL_ALLOC |
a7f7f624 | 990 | help |
1da177e4 LT |
991 | This driver supports the IBM Power Linux family RAID adapters. |
992 | This includes IBM pSeries 5712, 5703, 5709, and 570A, as well | |
993 | as IBM iSeries 5702, 5703, 5709, and 570A. | |
994 | ||
995 | config SCSI_IPR_TRACE | |
996 | bool "enable driver internal trace" | |
997 | depends on SCSI_IPR | |
efbbdd84 | 998 | default y |
1da177e4 LT |
999 | help |
1000 | If you say Y here, the driver will trace all commands issued | |
1001 | to the adapter. Performance impact is minimal. Trace can be | |
1002 | dumped using /sys/bus/class/scsi_host/hostXX/trace. | |
1003 | ||
1004 | config SCSI_IPR_DUMP | |
1005 | bool "enable adapter dump support" | |
1006 | depends on SCSI_IPR | |
efbbdd84 | 1007 | default y |
1da177e4 LT |
1008 | help |
1009 | If you say Y here, the driver will support adapter crash dump. | |
1010 | If you enable this support, the iprdump daemon can be used | |
1011 | to capture adapter failure analysis information. | |
1012 | ||
1013 | config SCSI_ZALON | |
1014 | tristate "Zalon SCSI support" | |
1015 | depends on GSC && SCSI | |
1016 | select SCSI_SPI_ATTRS | |
1017 | help | |
1018 | The Zalon is a GSC/HSC bus interface chip that sits between the | |
1019 | PA-RISC processor and the NCR 53c720 SCSI controller on C100, | |
1020 | C110, J200, J210 and some D, K & R-class machines. It's also | |
1021 | used on the add-in Bluefish, Barracuda & Shrike SCSI cards. | |
1022 | Say Y here if you have one of these machines or cards. | |
1023 | ||
1da177e4 | 1024 | config SCSI_NCR53C8XX_DEFAULT_TAGS |
e55a3e8a | 1025 | int "default tagged command queue depth" |
af8a6722 | 1026 | depends on SCSI_ZALON |
1da177e4 | 1027 | default "8" |
a7f7f624 | 1028 | help |
1da177e4 LT |
1029 | "Tagged command queuing" is a feature of SCSI-2 which improves |
1030 | performance: the host adapter can send several SCSI commands to a | |
1031 | device's queue even if previous commands haven't finished yet. | |
1032 | Because the device is intelligent, it can optimize its operations | |
1033 | (like head positioning) based on its own request queue. Some SCSI | |
1034 | devices don't implement this properly; if you want to disable this | |
1035 | feature, enter 0 or 1 here (it doesn't matter which). | |
1036 | ||
1037 | The default value is 8 and should be supported by most hard disks. | |
1038 | This value can be overridden from the boot command line using the | |
1039 | 'tags' option as follows (example): | |
1040 | 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to | |
1041 | 4, set queue depth to 16 for target 2 and target 3 on controller 0 | |
1042 | and set queue depth to 10 for target 0 / lun 2 on controller 1. | |
1043 | ||
1044 | The normal answer therefore is to go with the default 8 and to use | |
1045 | a boot command line option for devices that need to use a different | |
1046 | command queue depth. | |
1047 | ||
1048 | There is no safe option other than using good SCSI devices. | |
1049 | ||
1050 | config SCSI_NCR53C8XX_MAX_TAGS | |
e55a3e8a | 1051 | int "maximum number of queued commands" |
af8a6722 | 1052 | depends on SCSI_ZALON |
1da177e4 | 1053 | default "32" |
a7f7f624 | 1054 | help |
1da177e4 LT |
1055 | This option allows you to specify the maximum number of commands |
1056 | that can be queued to any device, when tagged command queuing is | |
1057 | possible. The default value is 32. Minimum is 2, maximum is 64. | |
1058 | Modern hard disks are able to support 64 tags and even more, but | |
1059 | do not seem to be faster when more than 32 tags are being used. | |
1060 | ||
1061 | So, the normal answer here is to go with the default value 32 unless | |
1062 | you are using very large hard disks with large cache (>= 1 MB) that | |
1063 | are able to take advantage of more than 32 tagged commands. | |
1064 | ||
1065 | There is no safe option and the default answer is recommended. | |
1066 | ||
1067 | config SCSI_NCR53C8XX_SYNC | |
e55a3e8a | 1068 | int "synchronous transfers frequency in MHz" |
af8a6722 | 1069 | depends on SCSI_ZALON |
1da177e4 | 1070 | default "20" |
a7f7f624 | 1071 | help |
1da177e4 LT |
1072 | The SCSI Parallel Interface-2 Standard defines 5 classes of transfer |
1073 | rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers | |
1074 | are respectively the maximum data transfer rates in mega-transfers | |
1075 | per second for each class. For example, a FAST-20 Wide 16 device is | |
1076 | able to transfer data at 20 million 16 bit packets per second for a | |
1077 | total rate of 40 MB/s. | |
1078 | ||
1079 | You may specify 0 if you want to only use asynchronous data | |
1080 | transfers. This is the safest and slowest option. Otherwise, specify | |
1081 | a value between 5 and 80, depending on the capability of your SCSI | |
1082 | controller. The higher the number, the faster the data transfer. | |
1083 | Note that 80 should normally be ok since the driver decreases the | |
1084 | value automatically according to the controller's capabilities. | |
1085 | ||
1086 | Your answer to this question is ignored for controllers with NVRAM, | |
1087 | since the driver will get this information from the user set-up. It | |
1088 | also can be overridden using a boot setup option, as follows | |
1089 | (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate | |
1090 | for FAST-20 synchronous data transfer (20 mega-transfers per | |
1091 | second). | |
1092 | ||
1093 | The normal answer therefore is not to go with the default but to | |
1094 | select the maximum value 80 allowing the driver to use the maximum | |
1095 | value supported by each controller. If this causes problems with | |
1096 | your SCSI devices, you should come back and decrease the value. | |
1097 | ||
1098 | There is no safe option other than using good cabling, right | |
1099 | terminations and SCSI conformant devices. | |
1100 | ||
1da177e4 | 1101 | config SCSI_NCR53C8XX_NO_DISCONNECT |
e55a3e8a | 1102 | bool "not allow targets to disconnect" |
af8a6722 | 1103 | depends on SCSI_ZALON && SCSI_NCR53C8XX_DEFAULT_TAGS=0 |
1da177e4 LT |
1104 | help |
1105 | This option is only provided for safety if you suspect some SCSI | |
1106 | device of yours to not support properly the target-disconnect | |
1107 | feature. In that case, you would say Y here. In general however, to | |
1108 | not allow targets to disconnect is not reasonable if there is more | |
1109 | than 1 device on a SCSI bus. The normal answer therefore is N. | |
1110 | ||
1da177e4 LT |
1111 | config SCSI_QLOGIC_FAS |
1112 | tristate "Qlogic FAS SCSI support" | |
1113 | depends on ISA && SCSI | |
a7f7f624 | 1114 | help |
1da177e4 LT |
1115 | This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic |
1116 | FastSCSI! cards as well as any other card based on the FASXX chip | |
1117 | (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards). | |
1118 | ||
1119 | This driver does NOT support the PCI versions of these cards. The | |
1120 | PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP | |
1121 | SCSI support"), below. | |
1122 | ||
1123 | Information about this driver is contained in | |
058595d5 | 1124 | <file:Documentation/scsi/qlogicfas.rst>. You should also read the |
1da177e4 LT |
1125 | SCSI-HOWTO, available from |
1126 | <http://www.tldp.org/docs.html#howto>. | |
1127 | ||
1128 | To compile this driver as a module, choose M here: the | |
1129 | module will be called qlogicfas. | |
1130 | ||
1da177e4 LT |
1131 | config SCSI_QLOGIC_1280 |
1132 | tristate "Qlogic QLA 1240/1x80/1x160 SCSI support" | |
1133 | depends on PCI && SCSI | |
1134 | help | |
1135 | Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter. | |
1136 | ||
1137 | To compile this driver as a module, choose M here: the | |
1138 | module will be called qla1280. | |
1139 | ||
1da177e4 LT |
1140 | config SCSI_QLOGICPTI |
1141 | tristate "PTI Qlogic, ISP Driver" | |
1142 | depends on SBUS && SCSI | |
1143 | help | |
1144 | This driver supports SBUS SCSI controllers from PTI or QLogic. These | |
1145 | controllers are known under Solaris as qpti and in the openprom as | |
1146 | PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are | |
1147 | driven by a different driver. | |
1148 | ||
1149 | To compile this driver as a module, choose M here: the | |
1150 | module will be called qlogicpti. | |
1151 | ||
1152 | source "drivers/scsi/qla2xxx/Kconfig" | |
afaf5a2d | 1153 | source "drivers/scsi/qla4xxx/Kconfig" |
ace7f46b | 1154 | source "drivers/scsi/qedi/Kconfig" |
61d8658b | 1155 | source "drivers/scsi/qedf/Kconfig" |
1da177e4 | 1156 | |
dea3101e | 1157 | config SCSI_LPFC |
1158 | tristate "Emulex LightPulse Fibre Channel Support" | |
1159 | depends on PCI && SCSI | |
e3d2bf65 | 1160 | depends on CPU_FREQ |
6a38792c | 1161 | depends on SCSI_FC_ATTRS |
cd069bb9 AB |
1162 | depends on NVME_TARGET_FC || NVME_TARGET_FC=n |
1163 | depends on NVME_FC || NVME_FC=n | |
6a7252fd | 1164 | select CRC_T10DIF |
fad0a161 | 1165 | select IRQ_POLL |
a7f7f624 | 1166 | help |
dea3101e | 1167 | This lpfc driver supports the Emulex LightPulse |
1168 | Family of Fibre Channel PCI host adapters. | |
1169 | ||
923e4b6a JS |
1170 | config SCSI_LPFC_DEBUG_FS |
1171 | bool "Emulex LightPulse Fibre Channel debugfs Support" | |
1172 | depends on SCSI_LPFC && DEBUG_FS | |
a7f7f624 | 1173 | help |
692105b8 | 1174 | This makes debugging information from the lpfc driver |
923e4b6a JS |
1175 | available via the debugfs filesystem. |
1176 | ||
ebc076b3 JS |
1177 | source "drivers/scsi/elx/Kconfig" |
1178 | ||
1da177e4 LT |
1179 | config SCSI_SIM710 |
1180 | tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" | |
c8bf9212 | 1181 | depends on EISA && SCSI |
1da177e4 | 1182 | select SCSI_SPI_ATTRS |
a7f7f624 | 1183 | help |
692105b8 | 1184 | This driver is for NCR53c710 based SCSI host adapters. |
1da177e4 | 1185 | |
c8bf9212 | 1186 | It currently supports Compaq EISA cards. |
1da177e4 | 1187 | |
1da177e4 | 1188 | config SCSI_DC395x |
92f6ed4a KC |
1189 | tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" |
1190 | depends on PCI && SCSI | |
9c2d2670 | 1191 | select SCSI_SPI_ATTRS |
a7f7f624 | 1192 | help |
1da177e4 LT |
1193 | This driver supports PCI SCSI host adapters based on the ASIC |
1194 | TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants. | |
1195 | ||
1196 | This driver works, but is still in experimental status. So better | |
1197 | have a bootable disk and a backup in case of emergency. | |
1198 | ||
62e3bfa4 | 1199 | Documentation can be found in <file:Documentation/scsi/dc395x.rst>. |
1da177e4 LT |
1200 | |
1201 | To compile this driver as a module, choose M here: the | |
1202 | module will be called dc395x. | |
1203 | ||
3a7e7be2 HR |
1204 | config SCSI_AM53C974 |
1205 | tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)" | |
1206 | depends on PCI && SCSI | |
1207 | select SCSI_SPI_ATTRS | |
a7f7f624 | 1208 | help |
3a7e7be2 HR |
1209 | This driver supports PCI SCSI host adapters based on the Am53C974A |
1210 | chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard | |
1211 | PCscsi/PCnet (Am53/79C974) solutions. | |
1212 | This is a new implementation base on the generic esp_scsi driver. | |
1213 | ||
3a7e7be2 HR |
1214 | Note that this driver does NOT support Tekram DC390W/U/F, which are |
1215 | based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those. | |
1216 | ||
1217 | To compile this driver as a module, choose M here: the | |
1218 | module will be called am53c974. | |
1219 | ||
1da177e4 LT |
1220 | config SCSI_NSP32 |
1221 | tristate "Workbit NinjaSCSI-32Bi/UDE support" | |
1222 | depends on PCI && SCSI && !64BIT | |
1223 | help | |
1224 | This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus | |
1225 | SCSI host adapter. Please read the SCSI-HOWTO, available from | |
1226 | <http://www.tldp.org/docs.html#howto>. | |
1227 | ||
1228 | To compile this driver as a module, choose M here: the | |
1229 | module will be called nsp32. | |
1230 | ||
48a31030 OZ |
1231 | config SCSI_WD719X |
1232 | tristate "Western Digital WD7193/7197/7296 support" | |
1233 | depends on PCI && SCSI | |
1234 | select EEPROM_93CX6 | |
a7f7f624 | 1235 | help |
48a31030 OZ |
1236 | This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI |
1237 | SCSI controllers (based on WD33C296A chip). | |
1238 | ||
1da177e4 | 1239 | config SCSI_DEBUG |
6d6f3807 | 1240 | tristate "SCSI debugging host and device simulator" |
1da177e4 | 1241 | depends on SCSI |
d0ace3c5 | 1242 | select CRC_T10DIF |
1da177e4 | 1243 | help |
6d6f3807 DG |
1244 | This pseudo driver simulates one or more hosts (SCSI initiators), |
1245 | each with one or more targets, each with one or more logical units. | |
1246 | Defaults to one of each, creating a small RAM disk device. Many | |
1247 | parameters found in the /sys/bus/pseudo/drivers/scsi_debug | |
1248 | directory can be tweaked at run time. | |
1249 | See <http://sg.danny.cz/sg/sdebug26.html> for more information. | |
1250 | Mainly used for testing and best as a module. If unsure, say N. | |
1da177e4 LT |
1251 | |
1252 | config SCSI_MESH | |
1253 | tristate "MESH (Power Mac internal SCSI) support" | |
1254 | depends on PPC32 && PPC_PMAC && SCSI | |
1255 | help | |
1256 | Many Power Macintoshes and clones have a MESH (Macintosh Enhanced | |
1257 | SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the | |
1258 | other Power Macintoshes do). Say Y to include support for this SCSI | |
1259 | adaptor. | |
1260 | ||
1261 | To compile this driver as a module, choose M here: the | |
1262 | module will be called mesh. | |
1263 | ||
1264 | config SCSI_MESH_SYNC_RATE | |
1265 | int "maximum synchronous transfer rate (MB/s) (0 = async)" | |
1266 | depends on SCSI_MESH | |
1267 | default "5" | |
1268 | help | |
1269 | On Power Macintoshes (and clones) where the MESH SCSI bus adaptor | |
1270 | drives a bus which is entirely internal to the machine (such as the | |
1271 | 7500, 7600, 8500, etc.), the MESH is capable of synchronous | |
1272 | operation at up to 10 MB/s. On machines where the SCSI bus | |
1273 | controlled by the MESH can have external devices connected, it is | |
1274 | usually rated at 5 MB/s. 5 is a safe value here unless you know the | |
1275 | MESH SCSI bus is internal only; in that case you can say 10. Say 0 | |
1276 | to disable synchronous operation. | |
1277 | ||
1278 | config SCSI_MESH_RESET_DELAY_MS | |
1279 | int "initial bus reset delay (ms) (0 = no reset)" | |
1280 | depends on SCSI_MESH | |
1281 | default "4000" | |
1282 | ||
1283 | config SCSI_MAC53C94 | |
1284 | tristate "53C94 (Power Mac external SCSI) support" | |
1285 | depends on PPC32 && PPC_PMAC && SCSI | |
1286 | help | |
1287 | On Power Macintoshes (and clones) with two SCSI buses, the external | |
1288 | SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older | |
1289 | machines which only have one SCSI bus, such as the 7200, also use | |
1290 | the 53C94. Say Y to include support for the 53C94. | |
1291 | ||
1292 | To compile this driver as a module, choose M here: the | |
1293 | module will be called mac53c94. | |
1294 | ||
1295 | source "drivers/scsi/arm/Kconfig" | |
1296 | ||
1297 | config JAZZ_ESP | |
1298 | bool "MIPS JAZZ FAS216 SCSI support" | |
1299 | depends on MACH_JAZZ && SCSI | |
3a243070 | 1300 | select SCSI_SPI_ATTRS |
1da177e4 LT |
1301 | help |
1302 | This is the driver for the onboard SCSI host adapter of MIPS Magnum | |
1303 | 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM | |
1304 | systems. | |
1305 | ||
1306 | config A3000_SCSI | |
1307 | tristate "A3000 WD33C93A support" | |
1308 | depends on AMIGA && SCSI | |
1309 | help | |
1310 | If you have an Amiga 3000 and have SCSI devices connected to the | |
1311 | built-in SCSI controller, say Y. Otherwise, say N. | |
1312 | ||
1313 | To compile this driver as a module, choose M here: the | |
90638f99 | 1314 | module will be called a3000. |
1da177e4 LT |
1315 | |
1316 | config A2091_SCSI | |
1317 | tristate "A2091/A590 WD33C93A support" | |
1318 | depends on ZORRO && SCSI | |
1319 | help | |
1320 | If you have a Commodore A2091 SCSI controller, say Y. Otherwise, | |
1321 | say N. | |
1322 | ||
1323 | To compile this driver as a module, choose M here: the | |
90638f99 | 1324 | module will be called a2091. |
1da177e4 LT |
1325 | |
1326 | config GVP11_SCSI | |
1327 | tristate "GVP Series II WD33C93A support" | |
1328 | depends on ZORRO && SCSI | |
a7f7f624 | 1329 | help |
1da177e4 LT |
1330 | If you have a Great Valley Products Series II SCSI controller, |
1331 | answer Y. Also say Y if you have a later model of GVP SCSI | |
1332 | controller (such as the GVP A4008 or a Combo board). Otherwise, | |
1333 | answer N. This driver does NOT work for the T-Rex series of | |
1334 | accelerators from TekMagic and GVP-M. | |
1335 | ||
1336 | To compile this driver as a module, choose M here: the | |
1337 | module will be called gvp11. | |
1338 | ||
a16efc1c | 1339 | config SCSI_A4000T |
92f6ed4a KC |
1340 | tristate "A4000T NCR53c710 SCSI support" |
1341 | depends on AMIGA && SCSI | |
a16efc1c | 1342 | select SCSI_SPI_ATTRS |
1da177e4 | 1343 | help |
a16efc1c KJ |
1344 | If you have an Amiga 4000T and have SCSI devices connected to the |
1345 | built-in SCSI controller, say Y. Otherwise, say N. | |
1346 | ||
1347 | To compile this driver as a module, choose M here: the | |
1348 | module will be called a4000t. | |
1349 | ||
45804fbb | 1350 | config SCSI_ZORRO7XX |
92f6ed4a KC |
1351 | tristate "Zorro NCR53c710 SCSI support" |
1352 | depends on ZORRO && SCSI | |
45804fbb | 1353 | select SCSI_SPI_ATTRS |
1da177e4 | 1354 | help |
45804fbb KJ |
1355 | Support for various NCR53c710-based SCSI controllers on Zorro |
1356 | expansion boards for the Amiga. | |
1da177e4 | 1357 | This includes: |
1da177e4 LT |
1358 | - the Amiga 4091 Zorro III SCSI-2 controller, |
1359 | - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller | |
1360 | (info at | |
1361 | <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>), | |
1362 | - the SCSI controller on the Phase5 Blizzard PowerUP 603e+ | |
1363 | accelerator card for the Amiga 1200, | |
1364 | - the SCSI controller on the GVP Turbo 040/060 accelerator. | |
1da177e4 | 1365 | |
3109e5ae MS |
1366 | config SCSI_ZORRO_ESP |
1367 | tristate "Zorro ESP SCSI support" | |
1368 | depends on ZORRO && SCSI | |
1369 | select SCSI_SPI_ATTRS | |
53dce332 | 1370 | select SCSI_ESP_PIO |
3109e5ae MS |
1371 | help |
1372 | Support for various NCR53C9x (ESP) based SCSI controllers on Zorro | |
1373 | expansion boards for the Amiga. | |
1374 | This includes: | |
1375 | - the Phase5 Blizzard 1230 II and IV SCSI controllers, | |
1376 | - the Phase5 Blizzard 2060 SCSI controller, | |
1377 | - the Phase5 Blizzard Cyberstorm and Cyberstorm II SCSI | |
1378 | controllers, | |
1379 | - the Fastlane Zorro III SCSI controller. | |
1380 | ||
1da177e4 LT |
1381 | config ATARI_SCSI |
1382 | tristate "Atari native SCSI support" | |
fb810d12 | 1383 | depends on ATARI && SCSI |
410ca5c7 | 1384 | select SCSI_SPI_ATTRS |
a7f7f624 | 1385 | help |
1da177e4 LT |
1386 | If you have an Atari with built-in NCR5380 SCSI controller (TT, |
1387 | Falcon, ...) say Y to get it supported. Of course also, if you have | |
1388 | a compatible SCSI controller (e.g. for Medusa). | |
1389 | ||
83d2aed4 FT |
1390 | To compile this driver as a module, choose M here: the module will |
1391 | be called atari_scsi. If you also enable NVRAM support, the SCSI | |
1392 | host's ID is taken from the setting in TT RTC NVRAM. | |
1da177e4 LT |
1393 | |
1394 | This driver supports both styles of NCR integration into the | |
1395 | system: the TT style (separate DMA), and the Falcon style (via | |
1396 | ST-DMA, replacing ACSI). It does NOT support other schemes, like | |
1397 | in the Hades (without DMA). | |
1398 | ||
1da177e4 | 1399 | config MAC_SCSI |
6e9ae6d5 | 1400 | tristate "Macintosh NCR5380 SCSI" |
2559a1ef | 1401 | depends on MAC && SCSI |
410ca5c7 | 1402 | select SCSI_SPI_ATTRS |
1da177e4 LT |
1403 | help |
1404 | This is the NCR 5380 SCSI controller included on most of the 68030 | |
1405 | based Macintoshes. If you have one of these say Y and read the | |
1406 | SCSI-HOWTO, available from | |
1407 | <http://www.tldp.org/docs.html#howto>. | |
1408 | ||
6fe07aaf FT |
1409 | config SCSI_MAC_ESP |
1410 | tristate "Macintosh NCR53c9[46] SCSI" | |
1411 | depends on MAC && SCSI | |
48fc8de9 | 1412 | select SCSI_SPI_ATTRS |
53dce332 | 1413 | select SCSI_ESP_PIO |
6fe07aaf FT |
1414 | help |
1415 | This is the NCR 53c9x SCSI controller found on most of the 68040 | |
1416 | based Macintoshes. | |
1417 | ||
1418 | To compile this driver as a module, choose M here: the module | |
1419 | will be called mac_esp. | |
1420 | ||
1da177e4 LT |
1421 | config MVME147_SCSI |
1422 | bool "WD33C93 SCSI driver for MVME147" | |
fa53bb65 | 1423 | depends on MVME147 && SCSI=y |
410ca5c7 | 1424 | select SCSI_SPI_ATTRS |
1da177e4 LT |
1425 | help |
1426 | Support for the on-board SCSI controller on the Motorola MVME147 | |
1427 | single-board computer. | |
1428 | ||
1429 | config MVME16x_SCSI | |
506c7bbc KJ |
1430 | tristate "NCR53C710 SCSI driver for MVME16x" |
1431 | depends on MVME16x && SCSI | |
410ca5c7 | 1432 | select SCSI_SPI_ATTRS |
1da177e4 LT |
1433 | help |
1434 | The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 | |
1435 | SCSI controller chip. Almost everyone using one of these boards | |
1436 | will want to say Y to this question. | |
1437 | ||
1438 | config BVME6000_SCSI | |
8276b58a KJ |
1439 | tristate "NCR53C710 SCSI driver for BVME6000" |
1440 | depends on BVME6000 && SCSI | |
410ca5c7 | 1441 | select SCSI_SPI_ATTRS |
1da177e4 LT |
1442 | help |
1443 | The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 | |
1444 | SCSI controller chip. Almost everyone using one of these boards | |
1445 | will want to say Y to this question. | |
1446 | ||
1da177e4 LT |
1447 | config SUN3_SCSI |
1448 | tristate "Sun3 NCR5380 SCSI" | |
c39e7eee | 1449 | depends on SUN3 && SCSI |
410ca5c7 | 1450 | select SCSI_SPI_ATTRS |
1da177e4 LT |
1451 | help |
1452 | This option will enable support for the OBIO (onboard io) NCR5380 | |
1453 | SCSI controller found in the Sun 3/50 and 3/60, as well as for | |
1454 | "Sun3" type VME scsi controllers also based on the NCR5380. | |
1455 | General Linux information on the Sun 3 series (now discontinued) | |
1456 | is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. | |
1457 | ||
1458 | config SUN3X_ESP | |
1459 | bool "Sun3x ESP SCSI" | |
fa53bb65 | 1460 | depends on SUN3X && SCSI=y |
0bb67f18 | 1461 | select SCSI_SPI_ATTRS |
1da177e4 LT |
1462 | help |
1463 | The ESP was an on-board SCSI controller used on Sun 3/80 | |
1464 | machines. Say Y here to compile in support for it. | |
1465 | ||
1466 | config SCSI_SUNESP | |
1467 | tristate "Sparc ESP Scsi Driver" | |
1468 | depends on SBUS && SCSI | |
3a243070 | 1469 | select SCSI_SPI_ATTRS |
1da177e4 LT |
1470 | help |
1471 | This is the driver for the Sun ESP SCSI host adapter. The ESP | |
dbfe54a9 FP |
1472 | chipset is present in most SPARC SBUS-based computers and |
1473 | supports the Emulex family of ESP SCSI chips (esp100, esp100A, | |
1474 | esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip. | |
1da177e4 LT |
1475 | |
1476 | To compile this driver as a module, choose M here: the | |
dbfe54a9 | 1477 | module will be called sun_esp. |
1da177e4 | 1478 | |
1da177e4 | 1479 | config ZFCP |
c06de6e2 | 1480 | tristate "FCP host bus adapter driver for IBM mainframes" |
347a8dc3 | 1481 | depends on S390 && QDIO && SCSI |
6a38792c | 1482 | depends on SCSI_FC_ATTRS |
1da177e4 | 1483 | help |
c06de6e2 BB |
1484 | If you want to access SCSI devices attached to your IBM mainframe by |
1485 | means of Fibre Channel Protocol host bus adapters say Y. | |
1486 | ||
1487 | Supported HBAs include different models of the FICON Express and FCP | |
1488 | Express I/O cards. | |
1489 | ||
1490 | For a more complete list, and for more details about setup and | |
1491 | operation refer to the IBM publication "Device Drivers, Features, and | |
1492 | Commands", SC33-8411. | |
1da177e4 LT |
1493 | |
1494 | This driver is also available as a module. This module will be | |
1495 | called zfcp. If you want to compile it as a module, say M here | |
cd238eff | 1496 | and read <file:Documentation/kbuild/modules.rst>. |
1da177e4 | 1497 | |
89a36810 AR |
1498 | config SCSI_PMCRAID |
1499 | tristate "PMC SIERRA Linux MaxRAID adapter support" | |
b2045240 | 1500 | depends on PCI && SCSI && NET |
ed4414ce | 1501 | select SGL_ALLOC |
a7f7f624 | 1502 | help |
89a36810 AR |
1503 | This driver supports the PMC SIERRA MaxRAID adapters. |
1504 | ||
dbf9bfe6 | 1505 | config SCSI_PM8001 |
1506 | tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver" | |
1507 | depends on PCI && SCSI | |
1508 | select SCSI_SAS_LIBSAS | |
1509 | help | |
1510 | This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip | |
1511 | based host adapters. | |
1512 | ||
7725ccfd JH |
1513 | config SCSI_BFA_FC |
1514 | tristate "Brocade BFA Fibre Channel Support" | |
1515 | depends on PCI && SCSI | |
6a38792c | 1516 | depends on SCSI_FC_ATTRS |
7725ccfd JH |
1517 | help |
1518 | This bfa driver supports all Brocade PCIe FC/FCOE host adapters. | |
1519 | ||
1520 | To compile this driver as a module, choose M here. The module will | |
1521 | be called bfa. | |
1522 | ||
4fe74b1c | 1523 | config SCSI_VIRTIO |
92f6ed4a KC |
1524 | tristate "virtio-scsi support" |
1525 | depends on VIRTIO | |
4fe74b1c PB |
1526 | help |
1527 | This is the virtual HBA driver for virtio. If the kernel will | |
1528 | be used in a virtual machine, say Y or M. | |
1529 | ||
a3667aae | 1530 | source "drivers/scsi/csiostor/Kconfig" |
4fe74b1c | 1531 | |
1da177e4 LT |
1532 | source "drivers/scsi/pcmcia/Kconfig" |
1533 | ||
e70bdd81 AB |
1534 | endif # SCSI_LOWLEVEL |
1535 | ||
a6a8d9f8 CS |
1536 | source "drivers/scsi/device_handler/Kconfig" |
1537 | ||
1da177e4 | 1538 | endmenu |