Commit | Line | Data |
---|---|---|
7be2c7c9 | 1 | # |
c58411e9 AZ |
2 | # RTC class/drivers configuration |
3 | # | |
4 | ||
5 | config RTC_LIB | |
b4d246b1 | 6 | bool |
0c86edc0 | 7 | |
bb35fb20 | 8 | menuconfig RTC_CLASS |
b4d246b1 | 9 | bool "Real Time Clock" |
0c86edc0 | 10 | default n |
3369465e | 11 | depends on !S390 && !UML |
0c86edc0 AZ |
12 | select RTC_LIB |
13 | help | |
14 | Generic RTC class support. If you say yes here, you will | |
98ab2c93 | 15 | be allowed to plug one or more RTCs to your system. You will |
27ae4104 | 16 | probably want to enable one or more of the interfaces below. |
0c86edc0 | 17 | |
bb35fb20 JE |
18 | if RTC_CLASS |
19 | ||
0c86edc0 | 20 | config RTC_HCTOSYS |
7ca1d488 | 21 | bool "Set system time from RTC on startup and resume" |
0c86edc0 AZ |
22 | default y |
23 | help | |
7ca1d488 DB |
24 | If you say yes here, the system time (wall clock) will be set using |
25 | the value read from a specified RTC device. This is useful to avoid | |
26 | unnecessary fsck runs at boot time, and to network better. | |
0c86edc0 AZ |
27 | |
28 | config RTC_HCTOSYS_DEVICE | |
7ca1d488 | 29 | string "RTC used to set the system time" |
9c5150b3 | 30 | depends on RTC_HCTOSYS |
0c86edc0 AZ |
31 | default "rtc0" |
32 | help | |
7ca1d488 | 33 | The RTC device that will be used to (re)initialize the system |
ae64d169 AZ |
34 | clock, usually rtc0. Initialization is done when the system |
35 | starts up, and when it resumes from a low power state. This | |
779d2089 DB |
36 | device should record time in UTC, since the kernel won't do |
37 | timezone correction. | |
7ca1d488 | 38 | |
55ff1aba DB |
39 | The driver for this RTC device must be loaded before late_initcall |
40 | functions run, so it must usually be statically linked. | |
41 | ||
7ca1d488 | 42 | This clock should be battery-backed, so that it reads the correct |
ae64d169 | 43 | time when the system boots from a power-off state. Otherwise, your |
7ca1d488 DB |
44 | system will need an external clock source (like an NTP server). |
45 | ||
46 | If the clock you specify here is not battery backed, it may still | |
47 | be useful to reinitialize system time when resuming from system | |
09b6bdb3 | 48 | sleep states. Do not specify an RTC here unless it stays powered |
7ca1d488 | 49 | during all this system's supported sleep states. |
0c86edc0 | 50 | |
9c5150b3 XP |
51 | config RTC_SYSTOHC |
52 | bool "Set the RTC time based on NTP synchronization" | |
53 | default y | |
54 | help | |
55 | If you say yes here, the system time (wall clock) will be stored | |
56 | in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11 | |
57 | minutes if userspace reports synchronized NTP status. | |
58 | ||
59 | config RTC_SYSTOHC_DEVICE | |
60 | string "RTC used to synchronize NTP adjustment" | |
61 | depends on RTC_SYSTOHC | |
62 | default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS | |
63 | default "rtc0" | |
64 | help | |
65 | The RTC device used for NTP synchronization. The main difference | |
66 | between RTC_HCTOSYS_DEVICE and RTC_SYSTOHC_DEVICE is that this | |
67 | one can sleep when setting time, because it runs in the workqueue | |
68 | context. | |
69 | ||
9e86ecb6 DB |
70 | config RTC_DEBUG |
71 | bool "RTC debug support" | |
9e86ecb6 DB |
72 | help |
73 | Say yes here to enable debugging support in the RTC framework | |
74 | and individual RTC drivers. | |
75 | ||
0c86edc0 | 76 | comment "RTC interfaces" |
0c86edc0 | 77 | |
c5c3e192 | 78 | config RTC_INTF_SYSFS |
6341e62b | 79 | bool "/sys/class/rtc/rtcN (sysfs)" |
bb35fb20 | 80 | depends on SYSFS |
8dc08395 | 81 | default RTC_CLASS |
c5c3e192 | 82 | help |
9e86ecb6 DB |
83 | Say yes here if you want to use your RTCs using sysfs interfaces, |
84 | /sys/class/rtc/rtc0 through /sys/.../rtcN. | |
c5c3e192 | 85 | |
ae64d169 | 86 | If unsure, say Y. |
c5c3e192 | 87 | |
728a2947 | 88 | config RTC_INTF_PROC |
6341e62b | 89 | bool "/proc/driver/rtc (procfs for rtcN)" |
bb35fb20 | 90 | depends on PROC_FS |
8dc08395 | 91 | default RTC_CLASS |
728a2947 | 92 | help |
92589c98 KM |
93 | Say yes here if you want to use your system clock RTC through |
94 | the proc interface, /proc/driver/rtc. | |
95 | Other RTCs will not be available through that API. | |
96 | If there is no RTC for the system clock, then the first RTC(rtc0) | |
97 | is used by default. | |
728a2947 | 98 | |
ae64d169 | 99 | If unsure, say Y. |
728a2947 | 100 | |
e824290e | 101 | config RTC_INTF_DEV |
6341e62b | 102 | bool "/dev/rtcN (character devices)" |
8dc08395 | 103 | default RTC_CLASS |
e824290e | 104 | help |
9e86ecb6 DB |
105 | Say yes here if you want to use your RTCs using the /dev |
106 | interfaces, which "udev" sets up as /dev/rtc0 through | |
ae64d169 | 107 | /dev/rtcN. |
e824290e | 108 | |
ae64d169 AZ |
109 | You may want to set up a symbolic link so one of these |
110 | can be accessed as /dev/rtc, which is a name | |
111 | expected by "hwclock" and some other programs. Recent | |
112 | versions of "udev" are known to set up the symlink for you. | |
113 | ||
114 | If unsure, say Y. | |
e824290e | 115 | |
6e57b1d6 JS |
116 | config RTC_INTF_DEV_UIE_EMUL |
117 | bool "RTC UIE emulation on dev interface" | |
118 | depends on RTC_INTF_DEV | |
119 | help | |
120 | Provides an emulation for RTC_UIE if the underlying rtc chip | |
121 | driver does not expose RTC_UIE ioctls. Those requests generate | |
122 | once-per-second update interrupts, used for synchronization. | |
123 | ||
124 | The emulation code will read the time from the hardware | |
125 | clock several times per second, please enable this option | |
126 | only if you know that you really need it. | |
127 | ||
09a21e56 AZ |
128 | config RTC_DRV_TEST |
129 | tristate "Test driver/device" | |
1fec7c66 AZ |
130 | help |
131 | If you say yes here you get support for the | |
09a21e56 AZ |
132 | RTC test driver. It's a software RTC which can be |
133 | used to test the RTC subsystem APIs. It gets | |
134 | the time from the system clock. | |
135 | You want this driver only if you are doing development | |
136 | on the RTC subsystem. Please read the source code | |
137 | for further details. | |
1fec7c66 AZ |
138 | |
139 | This driver can also be built as a module. If so, the module | |
09a21e56 AZ |
140 | will be called rtc-test. |
141 | ||
142 | comment "I2C RTC drivers" | |
bb35fb20 JE |
143 | depends on I2C |
144 | ||
145 | if I2C | |
1fec7c66 | 146 | |
008b3040 HZ |
147 | config RTC_DRV_88PM860X |
148 | tristate "Marvell 88PM860x" | |
3783055e | 149 | depends on MFD_88PM860X |
008b3040 HZ |
150 | help |
151 | If you say yes here you get support for RTC function in Marvell | |
152 | 88PM860x chips. | |
153 | ||
154 | This driver can also be built as a module. If so, the module | |
155 | will be called rtc-88pm860x. | |
156 | ||
2985c29c QZ |
157 | config RTC_DRV_88PM80X |
158 | tristate "Marvell 88PM80x" | |
3783055e | 159 | depends on MFD_88PM800 |
2985c29c QZ |
160 | help |
161 | If you say yes here you get support for RTC function in Marvell | |
162 | 88PM80x chips. | |
163 | ||
164 | This driver can also be built as a module. If so, the module | |
165 | will be called rtc-88pm80x. | |
166 | ||
0b2f6228 | 167 | config RTC_DRV_ABB5ZES3 |
98ab2c93 AB |
168 | select REGMAP_I2C |
169 | tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3" | |
170 | help | |
0b2f6228 AE |
171 | If you say yes here you get support for the Abracon |
172 | AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip. | |
173 | ||
174 | This driver can also be built as a module. If so, the module | |
175 | will be called rtc-ab-b5ze-s3. | |
176 | ||
4d61ff6b PDM |
177 | config RTC_DRV_ABX80X |
178 | tristate "Abracon ABx80x" | |
179 | help | |
180 | If you say yes here you get support for Abracon AB080X and AB180X | |
181 | families of ultra-low-power battery- and capacitor-backed real-time | |
182 | clock chips. | |
183 | ||
184 | This driver can also be built as a module. If so, the module | |
185 | will be called rtc-abx80x. | |
186 | ||
b4506261 LD |
187 | config RTC_DRV_AS3722 |
188 | tristate "ams AS3722 RTC driver" | |
189 | depends on MFD_AS3722 | |
190 | help | |
191 | If you say yes here you get support for the RTC of ams AS3722 PMIC | |
192 | chips. | |
193 | ||
194 | This driver can also be built as a module. If so, the module | |
195 | will be called rtc-as3722. | |
196 | ||
1abb0dc9 | 197 | config RTC_DRV_DS1307 |
a2166858 | 198 | tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00, EPSON RX-8025" |
1abb0dc9 DB |
199 | help |
200 | If you say yes here you get support for various compatible RTC | |
ae64d169 | 201 | chips (often with battery backup) connected with I2C. This driver |
1abb0dc9 | 202 | should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00, |
a2166858 MF |
203 | EPSON RX-8025 and probably other chips. In some cases the RTC |
204 | must already have been initialized (by manufacturing or a | |
205 | bootloader). | |
1abb0dc9 DB |
206 | |
207 | The first seven registers on these chips hold an RTC, and other | |
208 | registers may add features such as NVRAM, a trickle charger for | |
ae64d169 | 209 | the RTC/NVRAM backup power, and alarms. NVRAM is visible in |
682d73f6 | 210 | sysfs, but other chip features may not be available. |
1abb0dc9 DB |
211 | |
212 | This driver can also be built as a module. If so, the module | |
213 | will be called rtc-ds1307. | |
214 | ||
445c0207 AM |
215 | config RTC_DRV_DS1307_HWMON |
216 | bool "HWMON support for rtc-ds1307" | |
217 | depends on RTC_DRV_DS1307 && HWMON | |
218 | depends on !(RTC_DRV_DS1307=y && HWMON=m) | |
219 | default y | |
220 | help | |
221 | Say Y here if you want to expose temperature sensor data on | |
222 | rtc-ds1307 (only DS3231) | |
223 | ||
bf4994d7 | 224 | config RTC_DRV_DS1374 |
09b6bdb3 | 225 | tristate "Dallas/Maxim DS1374" |
bf4994d7 SW |
226 | help |
227 | If you say yes here you get support for Dallas Semiconductor | |
ae64d169 | 228 | DS1374 real-time clock chips. If an interrupt is associated |
bf4994d7 SW |
229 | with the device, the alarm functionality is supported. |
230 | ||
ae64d169 | 231 | This driver can also be built as a module. If so, the module |
bf4994d7 SW |
232 | will be called rtc-ds1374. |
233 | ||
920f91e5 SA |
234 | config RTC_DRV_DS1374_WDT |
235 | bool "Dallas/Maxim DS1374 watchdog timer" | |
236 | depends on RTC_DRV_DS1374 | |
237 | help | |
238 | If you say Y here you will get support for the | |
239 | watchdog timer in the Dallas Semiconductor DS1374 | |
240 | real-time clock chips. | |
241 | ||
09a21e56 AZ |
242 | config RTC_DRV_DS1672 |
243 | tristate "Dallas/Maxim DS1672" | |
9bf5b4f5 AN |
244 | help |
245 | If you say yes here you get support for the | |
09a21e56 | 246 | Dallas/Maxim DS1672 timekeeping chip. |
9bf5b4f5 AN |
247 | |
248 | This driver can also be built as a module. If so, the module | |
09a21e56 | 249 | will be called rtc-ds1672. |
9bf5b4f5 | 250 | |
c03675f0 RZ |
251 | config RTC_DRV_DS3232 |
252 | tristate "Dallas/Maxim DS3232" | |
c03675f0 RZ |
253 | help |
254 | If you say yes here you get support for Dallas Semiconductor | |
f46418c5 LCB |
255 | DS3232 real-time clock chips. If an interrupt is associated |
256 | with the device, the alarm functionality is supported. | |
c03675f0 RZ |
257 | |
258 | This driver can also be built as a module. If so, the module | |
259 | will be called rtc-ds3232. | |
260 | ||
dcaf0384 HS |
261 | config RTC_DRV_HYM8563 |
262 | tristate "Haoyu Microelectronics HYM8563" | |
3783055e | 263 | depends on OF |
dcaf0384 HS |
264 | help |
265 | Say Y to enable support for the HYM8563 I2C RTC chip. Apart | |
266 | from the usual rtc functions it provides a clock output of | |
267 | up to 32kHz. | |
268 | ||
269 | This driver can also be built as a module. If so, the module | |
270 | will be called rtc-hym8563. | |
271 | ||
38ae176e KM |
272 | config RTC_DRV_LP8788 |
273 | tristate "TI LP8788 RTC driver" | |
274 | depends on MFD_LP8788 | |
275 | help | |
276 | Say Y to enable support for the LP8788 RTC/ALARM driver. | |
277 | ||
09a21e56 | 278 | config RTC_DRV_MAX6900 |
09b6bdb3 | 279 | tristate "Maxim MAX6900" |
7e56a7dc | 280 | help |
09a21e56 AZ |
281 | If you say yes here you will get support for the |
282 | Maxim MAX6900 I2C RTC chip. | |
7e56a7dc HVR |
283 | |
284 | This driver can also be built as a module. If so, the module | |
09a21e56 | 285 | will be called rtc-max6900. |
7e56a7dc | 286 | |
94c01ab6 SW |
287 | config RTC_DRV_MAX8907 |
288 | tristate "Maxim MAX8907" | |
289 | depends on MFD_MAX8907 | |
290 | help | |
291 | If you say yes here you will get support for the | |
292 | RTC of Maxim MAX8907 PMIC. | |
293 | ||
294 | This driver can also be built as a module. If so, the module | |
295 | will be called rtc-max8907. | |
296 | ||
a39069f6 HZ |
297 | config RTC_DRV_MAX8925 |
298 | tristate "Maxim MAX8925" | |
299 | depends on MFD_MAX8925 | |
300 | help | |
301 | If you say yes here you will get support for the | |
302 | RTC of Maxim MAX8925 PMIC. | |
303 | ||
304 | This driver can also be built as a module. If so, the module | |
305 | will be called rtc-max8925. | |
306 | ||
9b16c0a4 JS |
307 | config RTC_DRV_MAX8998 |
308 | tristate "Maxim MAX8998" | |
309 | depends on MFD_MAX8998 | |
310 | help | |
311 | If you say yes here you will get support for the | |
312 | RTC of Maxim MAX8998 PMIC. | |
313 | ||
314 | This driver can also be built as a module. If so, the module | |
315 | will be called rtc-max8998. | |
316 | ||
5e0b2704 JL |
317 | config RTC_DRV_MAX8997 |
318 | tristate "Maxim MAX8997" | |
319 | depends on MFD_MAX8997 | |
320 | help | |
321 | If you say yes here you will get support for the | |
322 | RTC of Maxim MAX8997 PMIC. | |
323 | ||
324 | This driver can also be built as a module. If so, the module | |
325 | will be called rtc-max8997. | |
326 | ||
fca1dd03 JL |
327 | config RTC_DRV_MAX77686 |
328 | tristate "Maxim MAX77686" | |
329 | depends on MFD_MAX77686 | |
330 | help | |
331 | If you say yes here you will get support for the | |
332 | RTC of Maxim MAX77686 PMIC. | |
333 | ||
334 | This driver can also be built as a module. If so, the module | |
335 | will be called rtc-max77686. | |
336 | ||
3ca1e326 CZ |
337 | config RTC_DRV_RK808 |
338 | tristate "Rockchip RK808 RTC" | |
339 | depends on MFD_RK808 | |
340 | help | |
341 | If you say yes here you will get support for the | |
342 | RTC of RK808 PMIC. | |
343 | ||
344 | This driver can also be built as a module. If so, the module | |
345 | will be called rk808-rtc. | |
346 | ||
09a21e56 | 347 | config RTC_DRV_RS5C372 |
5d4529be | 348 | tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A" |
edf1aaa3 AZ |
349 | help |
350 | If you say yes here you get support for the | |
5d4529be | 351 | Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips. |
edf1aaa3 AZ |
352 | |
353 | This driver can also be built as a module. If so, the module | |
09a21e56 | 354 | will be called rtc-rs5c372. |
edf1aaa3 | 355 | |
09a21e56 | 356 | config RTC_DRV_ISL1208 |
09b6bdb3 | 357 | tristate "Intersil ISL1208" |
5ec3e4b7 AN |
358 | help |
359 | If you say yes here you get support for the | |
09b6bdb3 | 360 | Intersil ISL1208 RTC chip. |
5ec3e4b7 AN |
361 | |
362 | This driver can also be built as a module. If so, the module | |
09a21e56 | 363 | will be called rtc-isl1208. |
5ec3e4b7 | 364 | |
d6c7428f RF |
365 | config RTC_DRV_ISL12022 |
366 | tristate "Intersil ISL12022" | |
367 | help | |
368 | If you say yes here you get support for the | |
369 | Intersil ISL12022 RTC chip. | |
370 | ||
371 | This driver can also be built as a module. If so, the module | |
372 | will be called rtc-isl12022. | |
373 | ||
70e12337 | 374 | config RTC_DRV_ISL12057 |
98ab2c93 AB |
375 | select REGMAP_I2C |
376 | tristate "Intersil ISL12057" | |
377 | help | |
70e12337 AE |
378 | If you say yes here you get support for the Intersil ISL12057 |
379 | I2C RTC chip. | |
380 | ||
381 | This driver can also be built as a module. If so, the module | |
382 | will be called rtc-isl12057. | |
383 | ||
09a21e56 AZ |
384 | config RTC_DRV_X1205 |
385 | tristate "Xicor/Intersil X1205" | |
db68b189 | 386 | help |
09a21e56 AZ |
387 | If you say yes here you get support for the |
388 | Xicor/Intersil X1205 RTC chip. | |
389 | ||
390 | This driver can also be built as a module. If so, the module | |
391 | will be called rtc-x1205. | |
db68b189 | 392 | |
18cb6368 RC |
393 | config RTC_DRV_PCF2127 |
394 | tristate "NXP PCF2127" | |
395 | help | |
396 | If you say yes here you get support for the NXP PCF2127/29 RTC | |
397 | chips. | |
398 | ||
399 | This driver can also be built as a module. If so, the module | |
400 | will be called rtc-pcf2127. | |
401 | ||
f803f0d0 TR |
402 | config RTC_DRV_PCF8523 |
403 | tristate "NXP PCF8523" | |
404 | help | |
405 | If you say yes here you get support for the NXP PCF8523 RTC | |
406 | chips. | |
407 | ||
408 | This driver can also be built as a module. If so, the module | |
409 | will be called rtc-pcf8523. | |
410 | ||
d084885e SB |
411 | config RTC_DRV_PCF85063 |
412 | tristate "NXP PCF85063" | |
413 | help | |
414 | If you say yes here you get support for the PCF85063 RTC chip | |
415 | ||
416 | This driver can also be built as a module. If so, the module | |
417 | will be called rtc-pcf85063. | |
418 | ||
b5a82d62 AZ |
419 | config RTC_DRV_PCF8563 |
420 | tristate "Philips PCF8563/Epson RTC8564" | |
b5a82d62 AZ |
421 | help |
422 | If you say yes here you get support for the | |
423 | Philips PCF8563 RTC chip. The Epson RTC8564 | |
424 | should work as well. | |
425 | ||
426 | This driver can also be built as a module. If so, the module | |
427 | will be called rtc-pcf8563. | |
428 | ||
9c0c5705 L |
429 | config RTC_DRV_PCF8583 |
430 | tristate "Philips PCF8583" | |
9c0c5705 | 431 | help |
bb71f99f | 432 | If you say yes here you get support for the Philips PCF8583 |
09a21e56 | 433 | RTC chip found on Acorn RiscPCs. This driver supports the |
bb71f99f | 434 | platform specific method of retrieving the current year from |
09a21e56 AZ |
435 | the RTC's SRAM. It will work on other platforms with the same |
436 | chip, but the year will probably have to be tweaked. | |
9c0c5705 L |
437 | |
438 | This driver can also be built as a module. If so, the module | |
439 | will be called rtc-pcf8583. | |
440 | ||
caaff562 | 441 | config RTC_DRV_M41T80 |
6b1a5235 | 442 | tristate "ST M41T62/65/M41T80/81/82/83/84/85/87 and compatible" |
caaff562 | 443 | help |
d3a126fc SF |
444 | If you say Y here you will get support for the ST M41T60 |
445 | and M41T80 RTC chips series. Currently, the following chips are | |
f30281f4 | 446 | supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84, |
6b1a5235 | 447 | M41ST85, M41ST87, and MicroCrystal RV4162. |
caaff562 AN |
448 | |
449 | This driver can also be built as a module. If so, the module | |
450 | will be called rtc-m41t80. | |
451 | ||
617780d2 | 452 | config RTC_DRV_M41T80_WDT |
d3a126fc | 453 | bool "ST M41T65/M41T80 series RTC watchdog timer" |
617780d2 AN |
454 | depends on RTC_DRV_M41T80 |
455 | help | |
456 | If you say Y here you will get support for the | |
d3a126fc | 457 | watchdog timer in the ST M41T60 and M41T80 RTC chips series. |
617780d2 | 458 | |
1ce7c83f PZ |
459 | config RTC_DRV_BQ32K |
460 | tristate "TI BQ32000" | |
461 | help | |
462 | If you say Y here you will get support for the TI | |
463 | BQ32000 I2C RTC chip. | |
464 | ||
465 | This driver can also be built as a module. If so, the module | |
466 | will be called rtc-bq32k. | |
467 | ||
afd8d0f9 DB |
468 | config RTC_DRV_DM355EVM |
469 | tristate "TI DaVinci DM355 EVM RTC" | |
470 | depends on MFD_DM355EVM_MSP | |
471 | help | |
472 | Supports the RTC firmware in the MSP430 on the DM355 EVM. | |
473 | ||
0c4a59fe | 474 | config RTC_DRV_TWL92330 |
6341e62b | 475 | bool "TI TWL92330/Menelaus" |
bb35fb20 | 476 | depends on MENELAUS |
0c4a59fe TL |
477 | help |
478 | If you say yes here you get support for the RTC on the | |
01dd2fbf | 479 | TWL92330 "Menelaus" power management chip, used with OMAP2 |
ae64d169 | 480 | platforms. The support is integrated with the rest of |
0c4a59fe TL |
481 | the Menelaus driver; it's not separate module. |
482 | ||
f96411ab | 483 | config RTC_DRV_TWL4030 |
a6b49ffd | 484 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0" |
6b8029fa | 485 | depends on TWL4030_CORE |
f96411ab DB |
486 | help |
487 | If you say yes here you get support for the RTC on the | |
a6b49ffd | 488 | TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms. |
f96411ab DB |
489 | |
490 | This driver can also be built as a module. If so, the module | |
a6b49ffd | 491 | will be called rtc-twl. |
f96411ab | 492 | |
d084885e SB |
493 | config RTC_DRV_PALMAS |
494 | tristate "TI Palmas RTC driver" | |
495 | depends on MFD_PALMAS | |
496 | help | |
497 | If you say yes here you get support for the RTC of TI PALMA series PMIC | |
498 | chips. | |
499 | ||
500 | This driver can also be built as a module. If so, the module | |
501 | will be called rtc-palma. | |
502 | ||
dc59ed38 LD |
503 | config RTC_DRV_TPS6586X |
504 | tristate "TI TPS6586X RTC driver" | |
505 | depends on MFD_TPS6586X | |
506 | help | |
a895d57d | 507 | TI Power Management IC TPS6586X supports RTC functionality |
dc59ed38 LD |
508 | along with alarm. This driver supports the RTC driver for |
509 | the TPS6586X RTC module. | |
510 | ||
0e783980 VB |
511 | config RTC_DRV_TPS65910 |
512 | tristate "TI TPS65910 RTC driver" | |
513 | depends on RTC_CLASS && MFD_TPS65910 | |
514 | help | |
515 | If you say yes here you get support for the RTC on the | |
516 | TPS65910 chips. | |
517 | ||
518 | This driver can also be built as a module. If so, the module | |
519 | will be called rtc-tps65910. | |
520 | ||
36d61824 LD |
521 | config RTC_DRV_TPS80031 |
522 | tristate "TI TPS80031/TPS80032 RTC driver" | |
523 | depends on MFD_TPS80031 | |
524 | help | |
a895d57d | 525 | TI Power Management IC TPS80031 supports RTC functionality |
36d61824 LD |
526 | along with alarm. This driver supports the RTC driver for |
527 | the TPS80031 RTC module. | |
528 | ||
90829c08 VB |
529 | config RTC_DRV_RC5T583 |
530 | tristate "RICOH 5T583 RTC driver" | |
531 | depends on MFD_RC5T583 | |
532 | help | |
533 | If you say yes here you get support for the RTC on the | |
534 | RICOH 5T583 chips. | |
535 | ||
536 | This driver can also be built as a module. If so, the module | |
537 | will be called rtc-rc5t583. | |
538 | ||
c46288b0 BB |
539 | config RTC_DRV_S35390A |
540 | tristate "Seiko Instruments S-35390A" | |
d479540d | 541 | select BITREVERSE |
c46288b0 BB |
542 | help |
543 | If you say yes here you will get support for the Seiko | |
544 | Instruments S-35390A. | |
545 | ||
546 | This driver can also be built as a module. If so the module | |
547 | will be called rtc-s35390a. | |
548 | ||
c6d8f400 SL |
549 | config RTC_DRV_FM3130 |
550 | tristate "Ramtron FM3130" | |
551 | help | |
552 | If you say Y here you will get support for the | |
553 | Ramtron FM3130 RTC chips. | |
554 | Ramtron FM3130 is a chip with two separate devices inside, | |
555 | RTC clock and FRAM. This driver provides only RTC functionality. | |
556 | ||
557 | This driver can also be built as a module. If so the module | |
558 | will be called rtc-fm3130. | |
559 | ||
ed13d89b AB |
560 | config RTC_DRV_RX8010 |
561 | tristate "Epson RX8010SJ" | |
562 | depends on I2C | |
563 | help | |
564 | If you say yes here you get support for the Epson RX8010SJ RTC | |
565 | chip. | |
566 | ||
567 | This driver can also be built as a module. If so, the module | |
568 | will be called rtc-rx8010. | |
569 | ||
a7fa9851 MW |
570 | config RTC_DRV_RX8581 |
571 | tristate "Epson RX-8581" | |
572 | help | |
573 | If you say yes here you will get support for the Epson RX-8581. | |
574 | ||
575 | This driver can also be built as a module. If so the module | |
576 | will be called rtc-rx8581. | |
577 | ||
3c2b9075 WG |
578 | config RTC_DRV_RX8025 |
579 | tristate "Epson RX-8025SA/NB" | |
580 | help | |
581 | If you say yes here you get support for the Epson | |
582 | RX-8025SA/NB RTC chips. | |
583 | ||
584 | This driver can also be built as a module. If so, the module | |
585 | will be called rtc-rx8025. | |
586 | ||
ae3551f9 MR |
587 | config RTC_DRV_EM3027 |
588 | tristate "EM Microelectronic EM3027" | |
589 | help | |
590 | If you say yes here you get support for the EM | |
591 | Microelectronic EM3027 RTC chips. | |
592 | ||
593 | This driver can also be built as a module. If so, the module | |
594 | will be called rtc-em3027. | |
595 | ||
52365230 | 596 | config RTC_DRV_RV3029C2 |
d2c6b874 | 597 | tristate "Micro Crystal RV3029" |
52365230 HS |
598 | help |
599 | If you say yes here you get support for the Micro Crystal | |
d2c6b874 | 600 | RV3029 RTC chips. |
52365230 HS |
601 | |
602 | This driver can also be built as a module. If so, the module | |
603 | will be called rtc-rv3029c2. | |
604 | ||
1e3929ef AB |
605 | config RTC_DRV_RV8803 |
606 | tristate "Micro Crystal RV8803" | |
607 | help | |
608 | If you say yes here you get support for the Micro Crystal | |
609 | RV8803 RTC chips. | |
610 | ||
611 | This driver can also be built as a module. If so, the module | |
612 | will be called rtc-rv8803. | |
613 | ||
5bccae6e | 614 | config RTC_DRV_S5M |
0c5deb1e | 615 | tristate "Samsung S2M/S5M series" |
5bccae6e SK |
616 | depends on MFD_SEC_CORE |
617 | help | |
618 | If you say yes here you will get support for the | |
0c5deb1e | 619 | RTC of Samsung S2MPS14 and S5M PMIC series. |
5bccae6e SK |
620 | |
621 | This driver can also be built as a module. If so, the module | |
622 | will be called rtc-s5m. | |
623 | ||
bb35fb20 JE |
624 | endif # I2C |
625 | ||
09a21e56 | 626 | comment "SPI RTC drivers" |
bb35fb20 JE |
627 | |
628 | if SPI_MASTER | |
09a21e56 | 629 | |
74d34d4b | 630 | config RTC_DRV_M41T93 |
98ab2c93 AB |
631 | tristate "ST M41T93" |
632 | help | |
633 | If you say yes here you will get support for the | |
634 | ST M41T93 SPI RTC chip. | |
74d34d4b | 635 | |
98ab2c93 AB |
636 | This driver can also be built as a module. If so, the module |
637 | will be called rtc-m41t93. | |
74d34d4b | 638 | |
8fc2c767 KH |
639 | config RTC_DRV_M41T94 |
640 | tristate "ST M41T94" | |
641 | help | |
642 | If you say yes here you will get support for the | |
643 | ST M41T94 SPI RTC chip. | |
644 | ||
645 | This driver can also be built as a module. If so, the module | |
646 | will be called rtc-m41t94. | |
647 | ||
53e84b67 DB |
648 | config RTC_DRV_DS1305 |
649 | tristate "Dallas/Maxim DS1305/DS1306" | |
650 | help | |
651 | Select this driver to get support for the Dallas/Maxim DS1305 | |
ae64d169 | 652 | and DS1306 real time clock chips. These support a trickle |
53e84b67 DB |
653 | charger, alarms, and NVRAM in addition to the clock. |
654 | ||
655 | This driver can also be built as a module. If so, the module | |
656 | will be called rtc-ds1305. | |
657 | ||
1d6316f5 | 658 | config RTC_DRV_DS1343 |
0dd449b1 | 659 | select REGMAP_SPI |
1d6316f5 RG |
660 | tristate "Dallas/Maxim DS1343/DS1344" |
661 | help | |
662 | If you say yes here you get support for the | |
663 | Dallas/Maxim DS1343 and DS1344 real time clock chips. | |
664 | Support for trickle charger, alarm is provided. | |
665 | ||
666 | This driver can also be built as a module. If so, the module | |
667 | will be called rtc-ds1343. | |
668 | ||
617b26a0 RG |
669 | config RTC_DRV_DS1347 |
670 | tristate "Dallas/Maxim DS1347" | |
671 | help | |
672 | If you say yes here you get support for the | |
673 | Dallas/Maxim DS1347 chips. | |
674 | ||
675 | This driver only supports the RTC feature, and not other chip | |
676 | features such as alarms. | |
677 | ||
678 | This driver can also be built as a module. If so, the module | |
679 | will be called rtc-ds1347. | |
680 | ||
06de1808 MJ |
681 | config RTC_DRV_DS1390 |
682 | tristate "Dallas/Maxim DS1390/93/94" | |
683 | help | |
7b9b2ef1 AZ |
684 | If you say yes here you get support for the |
685 | Dallas/Maxim DS1390/93/94 chips. | |
06de1808 | 686 | |
fa395fb8 IG |
687 | This driver supports the RTC feature and trickle charging but not |
688 | other chip features such as alarms. | |
06de1808 MJ |
689 | |
690 | This driver can also be built as a module. If so, the module | |
691 | will be called rtc-ds1390. | |
692 | ||
2805b969 MD |
693 | config RTC_DRV_R9701 |
694 | tristate "Epson RTC-9701JE" | |
695 | help | |
696 | If you say yes here you will get support for the | |
697 | Epson RTC-9701JE SPI RTC chip. | |
698 | ||
699 | This driver can also be built as a module. If so, the module | |
700 | will be called rtc-r9701. | |
701 | ||
d084885e SB |
702 | config RTC_DRV_RX4581 |
703 | tristate "Epson RX-4581" | |
704 | help | |
705 | If you say yes here you will get support for the Epson RX-4581. | |
706 | ||
707 | This driver can also be built as a module. If so the module | |
708 | will be called rtc-rx4581. | |
709 | ||
710 | config RTC_DRV_RX6110 | |
711 | tristate "Epson RX-6110" | |
712 | select REGMAP_SPI | |
713 | help | |
714 | If you say yes here you will get support for the Epson RX-6610. | |
715 | ||
716 | This driver can also be built as a module. If so the module | |
717 | will be called rtc-rx6110. | |
718 | ||
e0ac4761 AN |
719 | config RTC_DRV_RS5C348 |
720 | tristate "Ricoh RS5C348A/B" | |
e0ac4761 AN |
721 | help |
722 | If you say yes here you get support for the | |
723 | Ricoh RS5C348A and RS5C348B RTC chips. | |
724 | ||
725 | This driver can also be built as a module. If so, the module | |
726 | will be called rtc-rs5c348. | |
727 | ||
d084885e SB |
728 | config RTC_DRV_MAX6902 |
729 | tristate "Maxim MAX6902" | |
730 | help | |
731 | If you say yes here you will get support for the | |
732 | Maxim MAX6902 SPI RTC chip. | |
733 | ||
734 | This driver can also be built as a module. If so, the module | |
735 | will be called rtc-max6902. | |
736 | ||
2f9b75e0 DA |
737 | config RTC_DRV_DS3234 |
738 | tristate "Maxim/Dallas DS3234" | |
739 | help | |
740 | If you say yes here you get support for the | |
741 | Maxim/Dallas DS3234 SPI RTC chip. | |
742 | ||
743 | This driver can also be built as a module. If so, the module | |
744 | will be called rtc-ds3234. | |
745 | ||
7f3923a1 CV |
746 | config RTC_DRV_PCF2123 |
747 | tristate "NXP PCF2123" | |
748 | help | |
749 | If you say yes here you get support for the NXP PCF2123 | |
750 | RTC chip. | |
751 | ||
752 | This driver can also be built as a module. If so, the module | |
753 | will be called rtc-pcf2123. | |
754 | ||
1fcbe42c JG |
755 | config RTC_DRV_MCP795 |
756 | tristate "Microchip MCP795" | |
757 | help | |
758 | If you say yes here you will get support for the Microchip MCP795. | |
759 | ||
760 | This driver can also be built as a module. If so the module | |
761 | will be called rtc-mcp795. | |
762 | ||
bb35fb20 JE |
763 | endif # SPI_MASTER |
764 | ||
09a21e56 | 765 | comment "Platform RTC drivers" |
09a21e56 AZ |
766 | |
767 | # this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h> | |
768 | # requires <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a | |
769 | # global rtc_lock ... it's not yet just another platform_device. | |
770 | ||
771 | config RTC_DRV_CMOS | |
772 | tristate "PC-style 'CMOS'" | |
41c9dbf4 | 773 | depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 |
c7500900 | 774 | default y if X86 |
09a21e56 AZ |
775 | help |
776 | Say "yes" here to get direct support for the real time clock | |
777 | found in every PC or ACPI-based system, and some other boards. | |
778 | Specifically the original MC146818, compatibles like those in | |
779 | PC south bridges, the DS12887 or M48T86, some multifunction | |
780 | or LPC bus chips, and so on. | |
781 | ||
782 | Your system will need to define the platform device used by | |
ae64d169 | 783 | this driver, otherwise it won't be accessible. This means |
09a21e56 AZ |
784 | you can safely enable this driver if you don't know whether |
785 | or not your board has this kind of hardware. | |
786 | ||
787 | This driver can also be built as a module. If so, the module | |
788 | will be called rtc-cmos. | |
789 | ||
85d0b3a5 RH |
790 | config RTC_DRV_ALPHA |
791 | bool "Alpha PC-style CMOS" | |
792 | depends on ALPHA | |
793 | default y | |
794 | help | |
795 | Direct support for the real-time clock found on every Alpha | |
796 | system, specifically MC146818 compatibles. If in doubt, say Y. | |
797 | ||
0146f261 | 798 | config RTC_DRV_VRTC |
933b9463 AC |
799 | tristate "Virtual RTC for Intel MID platforms" |
800 | depends on X86_INTEL_MID | |
801 | default y if X86_INTEL_MID | |
0146f261 FT |
802 | |
803 | help | |
804 | Say "yes" here to get direct support for the real time clock | |
805 | found on Moorestown platforms. The VRTC is a emulated RTC that | |
806 | derives its clock source from a real RTC in the PMIC. The MC146818 | |
807 | style programming interface is mostly conserved, but any | |
808 | updates are done via IPC calls to the system controller FW. | |
809 | ||
537739de TB |
810 | config RTC_DRV_DS1216 |
811 | tristate "Dallas DS1216" | |
bb35fb20 | 812 | depends on SNI_RM |
537739de TB |
813 | help |
814 | If you say yes here you get support for the Dallas DS1216 RTC chips. | |
815 | ||
5f119f29 TB |
816 | config RTC_DRV_DS1286 |
817 | tristate "Dallas DS1286" | |
706b632d | 818 | depends on HAS_IOMEM |
5f119f29 TB |
819 | help |
820 | If you say yes here you get support for the Dallas DS1286 RTC chips. | |
821 | ||
739d340d PM |
822 | config RTC_DRV_DS1302 |
823 | tristate "Dallas DS1302" | |
824 | depends on SH_SECUREEDGE5410 | |
825 | help | |
826 | If you say yes here you get support for the Dallas DS1302 RTC chips. | |
827 | ||
8f26795a AS |
828 | config RTC_DRV_DS1511 |
829 | tristate "Dallas DS1511" | |
706b632d | 830 | depends on HAS_IOMEM |
8f26795a AS |
831 | help |
832 | If you say yes here you get support for the | |
833 | Dallas DS1511 timekeeping/watchdog chip. | |
834 | ||
835 | This driver can also be built as a module. If so, the module | |
836 | will be called rtc-ds1511. | |
837 | ||
09a21e56 | 838 | config RTC_DRV_DS1553 |
09b6bdb3 | 839 | tristate "Maxim/Dallas DS1553" |
706b632d | 840 | depends on HAS_IOMEM |
7520b94d AZ |
841 | help |
842 | If you say yes here you get support for the | |
09b6bdb3 | 843 | Maxim/Dallas DS1553 timekeeping chip. |
7520b94d AZ |
844 | |
845 | This driver can also be built as a module. If so, the module | |
09a21e56 AZ |
846 | will be called rtc-ds1553. |
847 | ||
aaaf5fbf JK |
848 | config RTC_DRV_DS1685_FAMILY |
849 | tristate "Dallas/Maxim DS1685 Family" | |
850 | help | |
851 | If you say yes here you get support for the Dallas/Maxim DS1685 | |
852 | family of real time chips. This family includes the DS1685/DS1687, | |
853 | DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and | |
854 | DS17885/DS17887 chips. | |
855 | ||
856 | This driver can also be built as a module. If so, the module | |
857 | will be called rtc-ds1685. | |
858 | ||
859 | choice | |
860 | prompt "Subtype" | |
861 | depends on RTC_DRV_DS1685_FAMILY | |
862 | default RTC_DRV_DS1685 | |
863 | ||
864 | config RTC_DRV_DS1685 | |
865 | bool "DS1685/DS1687" | |
866 | help | |
867 | This enables support for the Dallas/Maxim DS1685/DS1687 real time | |
868 | clock chip. | |
869 | ||
870 | This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30) | |
871 | systems, as well as EPPC-405-UC modules by electronic system design | |
872 | GmbH. | |
873 | ||
874 | config RTC_DRV_DS1689 | |
875 | bool "DS1689/DS1693" | |
876 | help | |
877 | This enables support for the Dallas/Maxim DS1689/DS1693 real time | |
878 | clock chip. | |
879 | ||
880 | This is an older RTC chip, supplanted by the DS1685/DS1687 above, | |
881 | which supports a few minor features such as Vcc, Vbat, and Power | |
882 | Cycle counters, plus a customer-specific, 8-byte ROM/Serial number. | |
883 | ||
884 | It also works for the even older DS1688/DS1691 RTC chips, which are | |
885 | virtually the same and carry the same model number. Both chips | |
886 | have 114 bytes of user NVRAM. | |
887 | ||
888 | config RTC_DRV_DS17285 | |
889 | bool "DS17285/DS17287" | |
890 | help | |
891 | This enables support for the Dallas/Maxim DS17285/DS17287 real time | |
892 | clock chip. | |
893 | ||
894 | This chip features 2kb of extended NV-SRAM. It may possibly be | |
895 | found in some SGI O2 systems (rare). | |
896 | ||
897 | config RTC_DRV_DS17485 | |
898 | bool "DS17485/DS17487" | |
899 | help | |
900 | This enables support for the Dallas/Maxim DS17485/DS17487 real time | |
901 | clock chip. | |
902 | ||
903 | This chip features 4kb of extended NV-SRAM. | |
904 | ||
905 | config RTC_DRV_DS17885 | |
906 | bool "DS17885/DS17887" | |
907 | help | |
908 | This enables support for the Dallas/Maxim DS17885/DS17887 real time | |
909 | clock chip. | |
910 | ||
911 | This chip features 8kb of extended NV-SRAM. | |
912 | ||
913 | endchoice | |
914 | ||
915 | config RTC_DS1685_PROC_REGS | |
916 | bool "Display register values in /proc" | |
917 | depends on RTC_DRV_DS1685_FAMILY && PROC_FS | |
918 | help | |
919 | Enable this to display a readout of all of the RTC registers in | |
920 | /proc/drivers/rtc. Keep in mind that this can potentially lead | |
921 | to lost interrupts, as reading Control Register C will clear | |
922 | all pending IRQ flags. | |
923 | ||
924 | Unless you are debugging this driver, choose N. | |
925 | ||
926 | config RTC_DS1685_SYSFS_REGS | |
927 | bool "SysFS access to RTC register bits" | |
928 | depends on RTC_DRV_DS1685_FAMILY && SYSFS | |
929 | help | |
930 | Enable this to provide access to the RTC control register bits | |
931 | in /sys. Some of the bits are read-write, others are read-only. | |
932 | ||
933 | Keep in mind that reading Control C's bits automatically clears | |
934 | all pending IRQ flags - this can cause lost interrupts. | |
935 | ||
936 | If you know that you need access to these bits, choose Y, Else N. | |
937 | ||
09b6bdb3 AZ |
938 | config RTC_DRV_DS1742 |
939 | tristate "Maxim/Dallas DS1742/1743" | |
706b632d | 940 | depends on HAS_IOMEM |
02964115 TH |
941 | help |
942 | If you say yes here you get support for the | |
09b6bdb3 | 943 | Maxim/Dallas DS1742/1743 timekeeping chip. |
02964115 TH |
944 | |
945 | This driver can also be built as a module. If so, the module | |
09b6bdb3 | 946 | will be called rtc-ds1742. |
02964115 | 947 | |
ad0200f7 JD |
948 | config RTC_DRV_DS2404 |
949 | tristate "Maxim/Dallas DS2404" | |
950 | help | |
951 | If you say yes here you get support for the | |
952 | Dallas DS2404 RTC chip. | |
953 | ||
954 | This driver can also be built as a module. If so, the module | |
955 | will be called rtc-ds2404. | |
956 | ||
fef931ff AJ |
957 | config RTC_DRV_DA9052 |
958 | tristate "Dialog DA9052/DA9053 RTC" | |
959 | depends on PMIC_DA9052 | |
960 | help | |
961 | Say y here to support the RTC driver for Dialog Semiconductor | |
962 | DA9052-BC and DA9053-AA/Bx PMICs. | |
963 | ||
6920d996 AJ |
964 | config RTC_DRV_DA9055 |
965 | tristate "Dialog Semiconductor DA9055 RTC" | |
966 | depends on MFD_DA9055 | |
967 | help | |
968 | If you say yes here you will get support for the | |
969 | RTC of the Dialog DA9055 PMIC. | |
970 | ||
971 | This driver can also be built as a module. If so, the module | |
972 | will be called rtc-da9055 | |
973 | ||
c2a57550 | 974 | config RTC_DRV_DA9063 |
80ca3277 T |
975 | tristate "Dialog Semiconductor DA9063/DA9062 RTC" |
976 | depends on MFD_DA9063 || MFD_DA9062 | |
c2a57550 OST |
977 | help |
978 | If you say yes here you will get support for the RTC subsystem | |
80ca3277 | 979 | for the Dialog Semiconductor PMIC chips DA9063 and DA9062. |
c2a57550 OST |
980 | |
981 | This driver can also be built as a module. If so, the module | |
982 | will be called "rtc-da9063". | |
983 | ||
5e3fd9e5 | 984 | config RTC_DRV_EFI |
985 | tristate "EFI RTC" | |
7efe6659 | 986 | depends on EFI && !X86 |
5e3fd9e5 | 987 | help |
988 | If you say yes here you will get support for the EFI | |
989 | Real Time Clock. | |
990 | ||
991 | This driver can also be built as a module. If so, the module | |
992 | will be called rtc-efi. | |
993 | ||
09b6bdb3 AZ |
994 | config RTC_DRV_STK17TA8 |
995 | tristate "Simtek STK17TA8" | |
706b632d | 996 | depends on HAS_IOMEM |
09a21e56 AZ |
997 | help |
998 | If you say yes here you get support for the | |
09b6bdb3 | 999 | Simtek STK17TA8 timekeeping chip. |
09a21e56 AZ |
1000 | |
1001 | This driver can also be built as a module. If so, the module | |
09b6bdb3 | 1002 | will be called rtc-stk17ta8. |
09a21e56 AZ |
1003 | |
1004 | config RTC_DRV_M48T86 | |
1005 | tristate "ST M48T86/Dallas DS12887" | |
09a21e56 AZ |
1006 | help |
1007 | If you say Y here you will get support for the | |
1008 | ST M48T86 and Dallas DS12887 RTC chips. | |
1009 | ||
1010 | This driver can also be built as a module. If so, the module | |
1011 | will be called rtc-m48t86. | |
1012 | ||
d1dbd82e TB |
1013 | config RTC_DRV_M48T35 |
1014 | tristate "ST M48T35" | |
706b632d | 1015 | depends on HAS_IOMEM |
d1dbd82e TB |
1016 | help |
1017 | If you say Y here you will get support for the | |
1018 | ST M48T35 RTC chip. | |
1019 | ||
1020 | This driver can also be built as a module, if so, the module | |
1021 | will be called "rtc-m48t35". | |
1022 | ||
2e774c7c | 1023 | config RTC_DRV_M48T59 |
94fe7424 | 1024 | tristate "ST M48T59/M48T08/M48T02" |
706b632d | 1025 | depends on HAS_IOMEM |
2e774c7c MZ |
1026 | help |
1027 | If you say Y here you will get support for the | |
94fe7424 KH |
1028 | ST M48T59 RTC chip and compatible ST M48T08 and M48T02. |
1029 | ||
1030 | These chips are usually found in Sun SPARC and UltraSPARC | |
1031 | workstations. | |
2e774c7c MZ |
1032 | |
1033 | This driver can also be built as a module, if so, the module | |
1034 | will be called "rtc-m48t59". | |
1035 | ||
4f9b9bba GU |
1036 | config RTC_DRV_MSM6242 |
1037 | tristate "Oki MSM6242" | |
706b632d | 1038 | depends on HAS_IOMEM |
4f9b9bba GU |
1039 | help |
1040 | If you say yes here you get support for the Oki MSM6242 | |
1041 | timekeeping chip. It is used in some Amiga models (e.g. A2000). | |
1042 | ||
1043 | This driver can also be built as a module. If so, the module | |
1044 | will be called rtc-msm6242. | |
1045 | ||
cca4c231 DM |
1046 | config RTC_DRV_BQ4802 |
1047 | tristate "TI BQ4802" | |
706b632d | 1048 | depends on HAS_IOMEM |
cca4c231 DM |
1049 | help |
1050 | If you say Y here you will get support for the TI | |
1051 | BQ4802 RTC chip. | |
1052 | ||
1053 | This driver can also be built as a module. If so, the module | |
1054 | will be called rtc-bq4802. | |
1055 | ||
4f672ce2 GU |
1056 | config RTC_DRV_RP5C01 |
1057 | tristate "Ricoh RP5C01" | |
706b632d | 1058 | depends on HAS_IOMEM |
4f672ce2 GU |
1059 | help |
1060 | If you say yes here you get support for the Ricoh RP5C01 | |
1061 | timekeeping chip. It is used in some Amiga models (e.g. A3000 | |
1062 | and A4000). | |
1063 | ||
1064 | This driver can also be built as a module. If so, the module | |
1065 | will be called rtc-rp5c01. | |
1066 | ||
09a21e56 AZ |
1067 | config RTC_DRV_V3020 |
1068 | tristate "EM Microelectronic V3020" | |
09a21e56 AZ |
1069 | help |
1070 | If you say yes here you will get support for the | |
1071 | EM Microelectronic v3020 RTC chip. | |
1072 | ||
1073 | This driver can also be built as a module. If so, the module | |
1074 | will be called rtc-v3020. | |
1075 | ||
35c86bf6 MB |
1076 | config RTC_DRV_WM831X |
1077 | tristate "Wolfson Microelectronics WM831x RTC" | |
1078 | depends on MFD_WM831X | |
1079 | help | |
1080 | If you say yes here you will get support for the RTC subsystem | |
1081 | of the Wolfson Microelectronics WM831X series PMICs. | |
1082 | ||
1083 | This driver can also be built as a module. If so, the module | |
1084 | will be called "rtc-wm831x". | |
1085 | ||
077eaf5b MB |
1086 | config RTC_DRV_WM8350 |
1087 | tristate "Wolfson Microelectronics WM8350 RTC" | |
1088 | depends on MFD_WM8350 | |
1089 | help | |
1090 | If you say yes here you will get support for the RTC subsystem | |
1091 | of the Wolfson Microelectronics WM8350. | |
1092 | ||
1093 | This driver can also be built as a module. If so, the module | |
1094 | will be called "rtc-wm8350". | |
1095 | ||
0942a71e RK |
1096 | config RTC_DRV_SPEAR |
1097 | tristate "SPEAR ST RTC" | |
1098 | depends on PLAT_SPEAR | |
1099 | default y | |
1100 | help | |
1101 | If you say Y here you will get support for the RTC found on | |
1102 | spear | |
1103 | ||
eae854b2 BR |
1104 | config RTC_DRV_PCF50633 |
1105 | depends on MFD_PCF50633 | |
1106 | tristate "NXP PCF50633 RTC" | |
1107 | help | |
1108 | If you say yes here you get support for the RTC subsystem of the | |
1109 | NXP PCF50633 used in embedded systems. | |
1110 | ||
bd207cfb LW |
1111 | config RTC_DRV_AB3100 |
1112 | tristate "ST-Ericsson AB3100 RTC" | |
1113 | depends on AB3100_CORE | |
1114 | default y if AB3100_CORE | |
1115 | help | |
1116 | Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC | |
1117 | support. This chip contains a battery- and capacitor-backed RTC. | |
1118 | ||
0af62f4d VS |
1119 | config RTC_DRV_AB8500 |
1120 | tristate "ST-Ericsson AB8500 RTC" | |
1121 | depends on AB8500_CORE | |
651fb480 | 1122 | select RTC_INTF_DEV |
dc43d4a2 | 1123 | select RTC_INTF_DEV_UIE_EMUL |
0af62f4d VS |
1124 | help |
1125 | Select this to enable the ST-Ericsson AB8500 power management IC RTC | |
1126 | support. This chip contains a battery- and capacitor-backed RTC. | |
1127 | ||
afd49a7e WZ |
1128 | config RTC_DRV_NUC900 |
1129 | tristate "NUC910/NUC920 RTC driver" | |
6b8029fa | 1130 | depends on ARCH_W90X900 |
afd49a7e WZ |
1131 | help |
1132 | If you say yes here you get support for the RTC subsystem of the | |
1133 | NUC910/NUC920 used in embedded systems. | |
bd207cfb | 1134 | |
16b1d26e NG |
1135 | config RTC_DRV_OPAL |
1136 | tristate "IBM OPAL RTC driver" | |
1137 | depends on PPC_POWERNV | |
1138 | default y | |
1139 | help | |
1140 | If you say yes here you get support for the PowerNV platform RTC | |
1141 | driver based on OPAL interfaces. | |
1142 | ||
1143 | This driver can also be built as a module. If so, the module | |
1144 | will be called rtc-opal. | |
1145 | ||
11143c19 SG |
1146 | config RTC_DRV_ZYNQMP |
1147 | tristate "Xilinx Zynq Ultrascale+ MPSoC RTC" | |
1148 | depends on OF | |
1149 | help | |
1150 | If you say yes here you get support for the RTC controller found on | |
1151 | Xilinx Zynq Ultrascale+ MPSoC. | |
1152 | ||
09a21e56 | 1153 | comment "on-CPU RTC drivers" |
09a21e56 | 1154 | |
125e550f OR |
1155 | config RTC_DRV_ASM9260 |
1156 | tristate "Alphascale asm9260 RTC" | |
1157 | depends on MACH_ASM9260 | |
1158 | help | |
1159 | If you say yes here you get support for the RTC on the | |
1160 | Alphascale asm9260 SoC. | |
1161 | ||
1162 | This driver can also be built as a module. If so, the module | |
1163 | will be called rtc-asm9260. | |
1164 | ||
8ecf6c54 MA |
1165 | config RTC_DRV_DAVINCI |
1166 | tristate "TI DaVinci RTC" | |
1167 | depends on ARCH_DAVINCI_DM365 | |
1168 | help | |
1169 | If you say yes here you get support for the RTC on the | |
1170 | DaVinci platforms (DM365). | |
1171 | ||
1172 | This driver can also be built as a module. If so, the module | |
1173 | will be called rtc-davinci. | |
1174 | ||
ba172208 BS |
1175 | config RTC_DRV_DIGICOLOR |
1176 | tristate "Conexant Digicolor RTC" | |
1177 | depends on ARCH_DIGICOLOR | |
1178 | help | |
1179 | If you say yes here you get support for the RTC on Conexant | |
1180 | Digicolor platforms. This currently includes the CX92755 SoC. | |
1181 | ||
1182 | This driver can also be built as a module. If so, the module | |
1183 | will be called rtc-digicolor. | |
1184 | ||
b224b9ac FE |
1185 | config RTC_DRV_IMXDI |
1186 | tristate "Freescale IMX DryIce Real Time Clock" | |
ef216ad0 | 1187 | depends on ARCH_MXC |
b224b9ac FE |
1188 | help |
1189 | Support for Freescale IMX DryIce RTC | |
1190 | ||
1191 | This driver can also be built as a module, if so, the module | |
1192 | will be called "rtc-imxdi". | |
1193 | ||
09a21e56 | 1194 | config RTC_DRV_OMAP |
8608976e LV |
1195 | tristate "TI OMAP Real Time Clock" |
1196 | depends on ARCH_OMAP || ARCH_DAVINCI | |
09a21e56 | 1197 | help |
427af9a6 | 1198 | Say "yes" here to support the on chip real time clock |
8608976e | 1199 | present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx. |
427af9a6 AM |
1200 | |
1201 | This driver can also be built as a module, if so, module | |
1202 | will be called rtc-omap. | |
7520b94d | 1203 | |
16f4efe7 AD |
1204 | config HAVE_S3C_RTC |
1205 | bool | |
1206 | help | |
1207 | This will include RTC support for Samsung SoCs. If | |
1208 | you want to include RTC support for any machine, kindly | |
1209 | select this in the respective mach-XXXX/Kconfig file. | |
1210 | ||
1add6781 BD |
1211 | config RTC_DRV_S3C |
1212 | tristate "Samsung S3C series SoC RTC" | |
b130d5c2 | 1213 | depends on ARCH_S3C64XX || HAVE_S3C_RTC |
1add6781 BD |
1214 | help |
1215 | RTC (Realtime Clock) driver for the clock inbuilt into the | |
1216 | Samsung S3C24XX series of SoCs. This can provide periodic | |
1217 | interrupt rates from 1Hz to 64Hz for user programs, and | |
1218 | wakeup from Alarm. | |
1219 | ||
1220 | The driver currently supports the common features on all the | |
1221 | S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440 | |
1222 | and S3C2442. | |
1223 | ||
1224 | This driver can also be build as a module. If so, the module | |
1225 | will be called rtc-s3c. | |
1226 | ||
fd507e2f AZ |
1227 | config RTC_DRV_EP93XX |
1228 | tristate "Cirrus Logic EP93XX" | |
bb35fb20 | 1229 | depends on ARCH_EP93XX |
fd507e2f AZ |
1230 | help |
1231 | If you say yes here you get support for the | |
1232 | RTC embedded in the Cirrus Logic EP93XX processors. | |
1233 | ||
1234 | This driver can also be built as a module. If so, the module | |
1235 | will be called rtc-ep93xx. | |
1236 | ||
e842f1c8 | 1237 | config RTC_DRV_SA1100 |
3888c090 HZ |
1238 | tristate "SA11x0/PXA2xx/PXA910" |
1239 | depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP | |
e842f1c8 RP |
1240 | help |
1241 | If you say Y here you will get access to the real time clock | |
1242 | built into your SA11x0 or PXA2xx CPU. | |
1243 | ||
1244 | To compile this driver as a module, choose M here: the | |
1245 | module will be called rtc-sa1100. | |
fd507e2f | 1246 | |
317a6104 PM |
1247 | config RTC_DRV_SH |
1248 | tristate "SuperH On-Chip RTC" | |
6b8029fa | 1249 | depends on SUPERH && HAVE_CLK |
317a6104 PM |
1250 | help |
1251 | Say Y here to enable support for the on-chip RTC found in | |
1252 | most SuperH processors. | |
1253 | ||
98ab2c93 | 1254 | To compile this driver as a module, choose M here: the |
317a6104 PM |
1255 | module will be called rtc-sh. |
1256 | ||
8417eb7a | 1257 | config RTC_DRV_VR41XX |
3e16f6af | 1258 | tristate "NEC VR41XX" |
bb35fb20 | 1259 | depends on CPU_VR41XX |
3e16f6af AZ |
1260 | help |
1261 | If you say Y here you will get access to the real time clock | |
1262 | built into your NEC VR41XX CPU. | |
1263 | ||
1264 | To compile this driver as a module, choose M here: the | |
1265 | module will be called rtc-vr41xx. | |
8417eb7a | 1266 | |
a190901c RK |
1267 | config RTC_DRV_PL030 |
1268 | tristate "ARM AMBA PL030 RTC" | |
1269 | depends on ARM_AMBA | |
1270 | help | |
1271 | If you say Y here you will get access to ARM AMBA | |
1272 | PrimeCell PL030 RTC found on certain ARM SOCs. | |
1273 | ||
1274 | To compile this driver as a module, choose M here: the | |
1275 | module will be called rtc-pl030. | |
1276 | ||
8ae6e163 DS |
1277 | config RTC_DRV_PL031 |
1278 | tristate "ARM AMBA PL031 RTC" | |
bb35fb20 | 1279 | depends on ARM_AMBA |
8ae6e163 DS |
1280 | help |
1281 | If you say Y here you will get access to ARM AMBA | |
09a21e56 | 1282 | PrimeCell PL031 RTC found on certain ARM SOCs. |
8ae6e163 DS |
1283 | |
1284 | To compile this driver as a module, choose M here: the | |
1285 | module will be called rtc-pl031. | |
1286 | ||
fa04e78b HCE |
1287 | config RTC_DRV_AT32AP700X |
1288 | tristate "AT32AP700X series RTC" | |
bb35fb20 | 1289 | depends on PLATFORM_AT32AP |
fa04e78b HCE |
1290 | help |
1291 | Driver for the internal RTC (Realtime Clock) on Atmel AVR32 | |
1292 | AT32AP700x family processors. | |
1293 | ||
7fc39f6d | 1294 | config RTC_DRV_AT91RM9200 |
24cecc1b | 1295 | tristate "AT91RM9200 or some AT91SAM9 RTC" |
938f970e | 1296 | depends on ARCH_AT91 |
4cdf854f DB |
1297 | help |
1298 | Driver for the internal RTC (Realtime Clock) module found on | |
24cecc1b | 1299 | Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips |
4cdf854f DB |
1300 | this is powered by the backup power supply. |
1301 | ||
1302 | config RTC_DRV_AT91SAM9 | |
3969eb48 | 1303 | tristate "AT91SAM9 RTT as RTC" |
ee72f18b | 1304 | depends on ARCH_AT91 |
43e112bb | 1305 | select MFD_SYSCON |
4cdf854f | 1306 | help |
3969eb48 BB |
1307 | Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which |
1308 | can be used as an RTC thanks to the backup power supply (e.g. a | |
1309 | small coin cell battery) which keeps this block and the GPBR | |
1310 | (General Purpose Backup Registers) block powered when the device | |
1311 | is shutdown. | |
1312 | Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd | |
1313 | probably want to use the real RTC block instead of the "RTT as an | |
1314 | RTC" driver. | |
4cdf854f | 1315 | |
45fd8a0c ML |
1316 | config RTC_DRV_AU1XXX |
1317 | tristate "Au1xxx Counter0 RTC support" | |
42a4f17d | 1318 | depends on MIPS_ALCHEMY |
45fd8a0c ML |
1319 | help |
1320 | This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year | |
1321 | counter) to be used as a RTC. | |
1322 | ||
1323 | This driver can also be built as a module. If so, the module | |
1324 | will be called rtc-au1xxx. | |
1325 | ||
8cc75c9a WB |
1326 | config RTC_DRV_BFIN |
1327 | tristate "Blackfin On-Chip RTC" | |
7f604599 | 1328 | depends on BLACKFIN && !BF561 |
8cc75c9a WB |
1329 | help |
1330 | If you say yes here you will get support for the | |
1331 | Blackfin On-Chip Real Time Clock. | |
1332 | ||
1333 | This driver can also be built as a module. If so, the module | |
1334 | will be called rtc-bfin. | |
1335 | ||
e9f2bd81 NI |
1336 | config RTC_DRV_RS5C313 |
1337 | tristate "Ricoh RS5C313" | |
bb35fb20 | 1338 | depends on SH_LANDISK |
e9f2bd81 NI |
1339 | help |
1340 | If you say yes here you get support for the Ricoh RS5C313 RTC chips. | |
1341 | ||
3afe6d04 GU |
1342 | config RTC_DRV_GENERIC |
1343 | tristate "Generic RTC support" | |
1344 | # Please consider writing a new RTC driver instead of using the generic | |
1345 | # RTC abstraction | |
47c8a08b | 1346 | depends on PARISC || M68K || PPC || SUPERH32 |
9eb16864 | 1347 | help |
3afe6d04 GU |
1348 | Say Y or M here to enable RTC support on systems using the generic |
1349 | RTC abstraction. If you do not know what you are doing, you should | |
9eb16864 KM |
1350 | just say Y. |
1351 | ||
dc944368 | 1352 | config RTC_DRV_PXA |
3cdf4ad9 RH |
1353 | tristate "PXA27x/PXA3xx" |
1354 | depends on ARCH_PXA | |
1355 | select RTC_DRV_SA1100 | |
1356 | help | |
1357 | If you say Y here you will get access to the real time clock | |
1358 | built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs | |
1359 | consisting of an SA1100 compatible RTC and the extended PXA RTC. | |
dc944368 | 1360 | |
98ab2c93 AB |
1361 | This RTC driver uses PXA RTC registers available since pxa27x |
1362 | series (RDxR, RYxR) instead of legacy RCNR, RTAR. | |
dc944368 | 1363 | |
f77fbdf9 AC |
1364 | config RTC_DRV_VT8500 |
1365 | tristate "VIA/WonderMedia 85xx SoC RTC" | |
1366 | depends on ARCH_VT8500 | |
1367 | help | |
1368 | If you say Y here you will get access to the real time clock | |
1369 | built into your VIA VT8500 SoC or its relatives. | |
1370 | ||
dc944368 | 1371 | |
7a138ede DM |
1372 | config RTC_DRV_SUN4V |
1373 | bool "SUN4V Hypervisor RTC" | |
1374 | depends on SPARC64 | |
1375 | help | |
1376 | If you say Y here you will get support for the Hypervisor | |
1377 | based RTC on SUN4V systems. | |
1378 | ||
9765d2d9 CYT |
1379 | config RTC_DRV_SUN6I |
1380 | tristate "Allwinner A31 RTC" | |
2863934e AP |
1381 | default MACH_SUN6I || MACH_SUN8I |
1382 | depends on ARCH_SUNXI | |
9765d2d9 | 1383 | help |
2863934e AP |
1384 | If you say Y here you will get support for the RTC found in |
1385 | some Allwinner SoCs like the A31 or the A64. | |
9765d2d9 | 1386 | |
594c6fb9 CC |
1387 | config RTC_DRV_SUNXI |
1388 | tristate "Allwinner sun4i/sun7i RTC" | |
64a1925c | 1389 | depends on MACH_SUN4I || MACH_SUN7I |
594c6fb9 CC |
1390 | help |
1391 | If you say Y here you will get support for the RTC found on | |
1392 | Allwinner A10/A20. | |
1393 | ||
de2cf332 DM |
1394 | config RTC_DRV_STARFIRE |
1395 | bool "Starfire RTC" | |
1396 | depends on SPARC64 | |
1397 | help | |
1398 | If you say Y here you will get support for the RTC found on | |
1399 | Starfire systems. | |
1400 | ||
0e149233 AN |
1401 | config RTC_DRV_TX4939 |
1402 | tristate "TX4939 SoC" | |
1403 | depends on SOC_TX4939 | |
1404 | help | |
1405 | Driver for the internal RTC (Realtime Clock) module found on | |
1406 | Toshiba TX4939 SoC. | |
1407 | ||
defb4514 SB |
1408 | config RTC_DRV_MV |
1409 | tristate "Marvell SoC RTC" | |
ace2c020 | 1410 | depends on ARCH_DOVE || ARCH_MVEBU |
defb4514 SB |
1411 | help |
1412 | If you say yes here you will get support for the in-chip RTC | |
1413 | that can be found in some of Marvell's SoC devices, such as | |
1414 | the Kirkwood 88F6281 and 88F6192. | |
1415 | ||
1416 | This driver can also be built as a module. If so, the module | |
1417 | will be called rtc-mv. | |
1418 | ||
a3a42806 GC |
1419 | config RTC_DRV_ARMADA38X |
1420 | tristate "Armada 38x Marvell SoC RTC" | |
1421 | depends on ARCH_MVEBU | |
1422 | help | |
1423 | If you say yes here you will get support for the in-chip RTC | |
1424 | that can be found in the Armada 38x Marvell's SoC device | |
1425 | ||
1426 | This driver can also be built as a module. If so, the module | |
1427 | will be called armada38x-rtc. | |
1428 | ||
98a9bb5b HUK |
1429 | config RTC_DRV_GEMINI |
1430 | tristate "Gemini SoC RTC" | |
1431 | depends on ARCH_GEMINI || COMPILE_TEST | |
1432 | depends on HAS_IOMEM | |
1433 | help | |
1434 | If you say Y here you will get support for the | |
1435 | RTC found on Gemini SoC's. | |
1436 | ||
1437 | This driver can also be built as a module. If so, the module | |
1438 | will be called rtc-gemini. | |
1439 | ||
0b5f037a GU |
1440 | config RTC_DRV_PS3 |
1441 | tristate "PS3 RTC" | |
1442 | depends on PPC_PS3 | |
1443 | help | |
1444 | If you say yes here you will get support for the RTC on PS3. | |
1445 | ||
1446 | This driver can also be built as a module. If so, the module | |
1447 | will be called rtc-ps3. | |
1448 | ||
aa958f57 LW |
1449 | config RTC_DRV_COH901331 |
1450 | tristate "ST-Ericsson COH 901 331 RTC" | |
1451 | depends on ARCH_U300 | |
1452 | help | |
1453 | If you say Y here you will get access to ST-Ericsson | |
1454 | COH 901 331 RTC clock found in some ST-Ericsson Mobile | |
1455 | Platforms. | |
1456 | ||
1457 | This driver can also be built as a module. If so, the module | |
1458 | will be called "rtc-coh901331". | |
1459 | ||
1460 | ||
df17f631 | 1461 | config RTC_DRV_STMP |
46b21218 WS |
1462 | tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC" |
1463 | depends on ARCH_MXS | |
20d048ac | 1464 | select STMP_DEVICE |
df17f631 | 1465 | help |
1466 | If you say yes here you will get support for the onboard | |
46b21218 | 1467 | STMP3xxx/i.MX23/i.MX28 RTC. |
df17f631 | 1468 | |
1469 | This driver can also be built as a module. If so, the module | |
1470 | will be called rtc-stmp3xxx. | |
1471 | ||
d3c7a3f7 DR |
1472 | config RTC_DRV_PCAP |
1473 | tristate "PCAP RTC" | |
1474 | depends on EZX_PCAP | |
1475 | help | |
1476 | If you say Y here you will get support for the RTC found on | |
1477 | the PCAP2 ASIC used on some Motorola phones. | |
1478 | ||
1c97872b UKK |
1479 | config RTC_DRV_MC13XXX |
1480 | depends on MFD_MC13XXX | |
1481 | tristate "Freescale MC13xxx RTC" | |
43299f28 | 1482 | help |
1c97872b UKK |
1483 | This enables support for the RTCs found on Freescale's PMICs |
1484 | MC13783 and MC13892. | |
43299f28 | 1485 | |
50aae724 AG |
1486 | config RTC_DRV_MPC5121 |
1487 | tristate "Freescale MPC5121 built-in RTC" | |
955dbea3 | 1488 | depends on PPC_MPC512x || PPC_MPC52xx |
50aae724 AG |
1489 | help |
1490 | If you say yes here you will get support for the | |
955dbea3 | 1491 | built-in RTC on MPC5121 or on MPC5200. |
50aae724 AG |
1492 | |
1493 | This driver can also be built as a module. If so, the module | |
1494 | will be called rtc-mpc5121. | |
1495 | ||
3bf0eea8 LPC |
1496 | config RTC_DRV_JZ4740 |
1497 | tristate "Ingenic JZ4740 SoC" | |
3bf0eea8 LPC |
1498 | depends on MACH_JZ4740 |
1499 | help | |
1500 | If you say yes here you get support for the Ingenic JZ4740 SoC RTC | |
1501 | controller. | |
1502 | ||
1503 | This driver can also be buillt as a module. If so, the module | |
1504 | will be called rtc-jz4740. | |
1505 | ||
c28b42e3 JE |
1506 | config RTC_DRV_LPC24XX |
1507 | tristate "NXP RTC for LPC178x/18xx/408x/43xx" | |
1508 | depends on ARCH_LPC18XX || COMPILE_TEST | |
1509 | depends on OF && HAS_IOMEM | |
1510 | help | |
1511 | This enables support for the NXP RTC found which can be found on | |
1512 | NXP LPC178x/18xx/408x/43xx devices. | |
1513 | ||
1514 | If you have one of the devices above enable this driver to use | |
1515 | the hardware RTC. This driver can also be buillt as a module. If | |
1516 | so, the module will be called rtc-lpc24xx. | |
1517 | ||
9aa449be KW |
1518 | config RTC_DRV_LPC32XX |
1519 | depends on ARCH_LPC32XX | |
1520 | tristate "NXP LPC32XX RTC" | |
1521 | help | |
1522 | This enables support for the NXP RTC in the LPC32XX | |
1523 | ||
1524 | This driver can also be buillt as a module. If so, the module | |
1525 | will be called rtc-lpc32xx. | |
1526 | ||
9a9a54ad AG |
1527 | config RTC_DRV_PM8XXX |
1528 | tristate "Qualcomm PMIC8XXX RTC" | |
c8d523a4 | 1529 | depends on MFD_PM8XXX || MFD_SPMI_PMIC |
9a9a54ad AG |
1530 | help |
1531 | If you say yes here you get support for the | |
1532 | Qualcomm PMIC8XXX RTC. | |
1533 | ||
1534 | To compile this driver as a module, choose M here: the | |
1535 | module will be called rtc-pm8xxx. | |
1536 | ||
ff859ba6 AC |
1537 | config RTC_DRV_TEGRA |
1538 | tristate "NVIDIA Tegra Internal RTC driver" | |
6b8029fa | 1539 | depends on ARCH_TEGRA |
ff859ba6 AC |
1540 | help |
1541 | If you say yes here you get support for the | |
1542 | Tegra 200 series internal RTC module. | |
1543 | ||
1544 | This drive can also be built as a module. If so, the module | |
1545 | will be called rtc-tegra. | |
1546 | ||
dd196a2b CM |
1547 | config RTC_DRV_TILE |
1548 | tristate "Tilera hypervisor RTC support" | |
1549 | depends on TILE | |
1550 | help | |
1551 | Enable support for the Linux driver side of the Tilera | |
1552 | hypervisor's real-time clock interface. | |
1553 | ||
2809e80b GX |
1554 | config RTC_DRV_PUV3 |
1555 | tristate "PKUnity v3 RTC support" | |
1556 | depends on ARCH_PUV3 | |
1557 | help | |
1558 | This enables support for the RTC in the PKUnity-v3 SoCs. | |
1559 | ||
1560 | This drive can also be built as a module. If so, the module | |
1561 | will be called rtc-puv3. | |
1562 | ||
b4f0b880 | 1563 | config RTC_DRV_LOONGSON1 |
1564 | tristate "loongson1 RTC support" | |
30ad29bb | 1565 | depends on MACH_LOONGSON32 |
b4f0b880 | 1566 | help |
1567 | This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year | |
1568 | counter) to be used as a RTC. | |
1569 | ||
1570 | This driver can also be built as a module. If so, the module | |
1571 | will be called rtc-ls1x. | |
1572 | ||
79811595 | 1573 | config RTC_DRV_MXC |
b224b9ac FE |
1574 | tristate "Freescale MXC Real Time Clock" |
1575 | depends on ARCH_MXC | |
b224b9ac FE |
1576 | help |
1577 | If you say yes here you get support for the Freescale MXC | |
1578 | RTC module. | |
1579 | ||
1580 | This driver can also be built as a module, if so, the module | |
1581 | will be called "rtc-mxc". | |
1582 | ||
179a502f SG |
1583 | config RTC_DRV_SNVS |
1584 | tristate "Freescale SNVS RTC support" | |
8a0fa184 | 1585 | select REGMAP_MMIO |
179a502f SG |
1586 | depends on HAS_IOMEM |
1587 | depends on OF | |
1588 | help | |
1589 | If you say yes here you get support for the Freescale SNVS | |
1590 | Low Power (LP) RTC module. | |
1591 | ||
1592 | This driver can also be built as a module, if so, the module | |
1593 | will be called "rtc-snvs". | |
1594 | ||
e88b815e XD |
1595 | config RTC_DRV_SIRFSOC |
1596 | tristate "SiRFSOC RTC" | |
1597 | depends on ARCH_SIRF | |
1598 | help | |
1599 | Say "yes" here to support the real time clock on SiRF SOC chips. | |
1600 | This driver can also be built as a module called rtc-sirfsoc. | |
1601 | ||
b5b2bdfc LJ |
1602 | config RTC_DRV_ST_LPC |
1603 | tristate "STMicroelectronics LPC RTC" | |
1604 | depends on ARCH_STI | |
1605 | depends on OF | |
1606 | help | |
1607 | Say Y here to include STMicroelectronics Low Power Controller | |
1608 | (LPC) based RTC support. | |
1609 | ||
1610 | To compile this driver as a module, choose M here: the | |
1611 | module will be called rtc-st-lpc. | |
1612 | ||
453b4c6d JJ |
1613 | config RTC_DRV_MOXART |
1614 | tristate "MOXA ART RTC" | |
441fb768 | 1615 | depends on ARCH_MOXART || COMPILE_TEST |
453b4c6d JJ |
1616 | help |
1617 | If you say yes here you get support for the MOXA ART | |
1618 | RTC module. | |
1619 | ||
1620 | This driver can also be built as a module. If so, the module | |
1621 | will be called rtc-moxart | |
1622 | ||
fc297911 TF |
1623 | config RTC_DRV_MT6397 |
1624 | tristate "Mediatek Real Time Clock driver" | |
04d3ba70 | 1625 | depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN) |
fc297911 TF |
1626 | help |
1627 | This selects the Mediatek(R) RTC driver. RTC is part of Mediatek | |
1628 | MT6397 PMIC. You should enable MT6397 PMIC MFD before select | |
1629 | Mediatek(R) RTC driver. | |
1630 | ||
1631 | If you want to use Mediatek(R) RTC interface, select Y or M here. | |
1632 | ||
f12d8695 LH |
1633 | config RTC_DRV_XGENE |
1634 | tristate "APM X-Gene RTC" | |
706b632d | 1635 | depends on HAS_IOMEM |
fdf8afa1 | 1636 | depends on ARCH_XGENE || COMPILE_TEST |
f12d8695 LH |
1637 | help |
1638 | If you say yes here you get support for the APM X-Gene SoC real time | |
1639 | clock. | |
1640 | ||
1641 | This driver can also be built as a module, if so, the module | |
1642 | will be called "rtc-xgene". | |
1643 | ||
51aa905c JH |
1644 | config RTC_DRV_PIC32 |
1645 | tristate "Microchip PIC32 RTC" | |
1646 | depends on MACH_PIC32 | |
1647 | default y | |
1648 | help | |
1649 | If you say yes here you get support for the PIC32 RTC module. | |
1650 | ||
1651 | This driver can also be built as a module. If so, the module | |
1652 | will be called rtc-pic32 | |
1653 | ||
62e00cb9 AH |
1654 | comment "HID Sensor RTC drivers" |
1655 | ||
1656 | config RTC_DRV_HID_SENSOR_TIME | |
1657 | tristate "HID Sensor Time" | |
1658 | depends on USB_HID | |
1659 | select IIO | |
1660 | select HID_SENSOR_HUB | |
1661 | select HID_SENSOR_IIO_COMMON | |
1662 | help | |
1663 | Say yes here to build support for the HID Sensors of type Time. | |
1664 | This drivers makes such sensors available as RTCs. | |
1665 | ||
1666 | If this driver is compiled as a module, it will be named | |
1667 | rtc-hid-sensor-time. | |
1668 | ||
1669 | ||
bb35fb20 | 1670 | endif # RTC_CLASS |