[linux-block.git] / drivers / regulator / mcp16502.c

// SPDX-License-Identifier: GPL-2.0
//
// MCP16502 PMIC driver
//
// Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
//
// Author: Andrei Stefanescu <andrei.stefanescu@microchip.com>
//
// Inspired from tps65086-regulator.c

#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/suspend.h>
#include <linux/gpio/consumer.h>

#define VDD_LOW_SEL 0x0D
#define VDD_HIGH_SEL 0x3F

#define MCP16502_FLT BIT(7)
#define MCP16502_ENS BIT(0)

/*
 * The PMIC has four sets of registers corresponding to four power modes:
 * Performance, Active, Low-power, Hibernate.
 *
 * Registers:
 * Each regulator has a register for each power mode. To access a register
 * for a specific regulator and mode BASE_* and OFFSET_* need to be added.
 *
 * Operating modes:
 * In order for the PMIC to transition to operating modes it has to be
 * controlled via GPIO lines called LPM and HPM.
 *
 * The registers are fully configurable such that you can put all regulators in
 * a low-power state while the PMIC is in Active mode. They are supposed to be
 * configured at startup and then simply transition to/from a global low-power
 * state by setting the GPIO lpm pin high/low.
 *
 * This driver keeps the PMIC in Active mode, Low-power state is set for the
 * regulators by enabling/disabling operating mode (FPWM or Auto PFM).
 *
 * The PMIC's Low-power and Hibernate modes are used during standby/suspend.
 * To enter standby/suspend the PMIC will go to Low-power mode. From there, it
 * will transition to Hibernate when the PWRHLD line is set to low by the MPU.
 */

/*
 * This function is useful for iterating over all regulators and accessing their
 * registers in a generic way or accessing a regulator device by its id.
 */
#define MCP16502_BASE(i) (((i) + 1) << 4)
#define MCP16502_STAT_BASE(i) ((i) + 5)

#define MCP16502_OFFSET_MODE_A 0
#define MCP16502_OFFSET_MODE_LPM 1
#define MCP16502_OFFSET_MODE_HIB 2

#define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
#define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
#define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY

#define MCP16502_MODE_AUTO_PFM 0
#define MCP16502_MODE_FPWM BIT(6)

#define MCP16502_VSEL 0x3F
#define MCP16502_EN BIT(7)
#define MCP16502_MODE BIT(6)

#define MCP16502_MIN_REG 0x0
#define MCP16502_MAX_REG 0x65

static unsigned int mcp16502_of_map_mode(unsigned int mode)
{
	if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
		return mode;

	return REGULATOR_MODE_INVALID;
}

#define MCP16502_REGULATOR(_name, _id, _ranges, _ops)			\
	[_id] = {							\
		.name			= _name,			\
		.regulators_node	= of_match_ptr("regulators"),	\
		.id			= _id,				\
		.ops			= &(_ops),			\
		.type			= REGULATOR_VOLTAGE,		\
		.owner			= THIS_MODULE,			\
		.n_voltages		= MCP16502_VSEL + 1,		\
		.linear_ranges		= _ranges,			\
		.n_linear_ranges	= ARRAY_SIZE(_ranges),		\
		.of_match		= of_match_ptr(_name),		\
		.of_map_mode		= mcp16502_of_map_mode,		\
		.vsel_reg		= (((_id) + 1) << 4),		\
		.vsel_mask		= MCP16502_VSEL,		\
		.enable_reg		= (((_id) + 1) << 4),		\
		.enable_mask		= MCP16502_EN,			\
	}

enum {
	BUCK1 = 0,
	BUCK2,
	BUCK3,
	BUCK4,
	LDO1,
	LDO2,
	NUM_REGULATORS
};

/*
 * struct mcp16502 - PMIC representation
 * @rdev: the regulators belonging to this chip
 * @rmap: regmap to be used for I2C communication
 * @lpm: LPM GPIO descriptor
 */
struct mcp16502 {
	struct gpio_desc *lpm;
};

/*
 * mcp16502_gpio_set_mode() - set the GPIO corresponding value
 *
 * Used to prepare transitioning into hibernate or resuming from it.
 */
static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
{
	switch (mode) {
	case MCP16502_OPMODE_ACTIVE:
		gpiod_set_value(mcp->lpm, 0);
		break;
	case MCP16502_OPMODE_LPM:
	case MCP16502_OPMODE_HIB:
		gpiod_set_value(mcp->lpm, 1);
		break;
	default:
		pr_err("%s: %d invalid\n", __func__, mode);
	}
}

/*
 * mcp16502_get_reg() - get the PMIC's configuration register for opmode
 *
 * @rdev: the regulator whose register we are searching
 * @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
 */
static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode)
{
	int reg = MCP16502_BASE(rdev_get_id(rdev));

	switch (opmode) {
	case MCP16502_OPMODE_ACTIVE:
		return reg + MCP16502_OFFSET_MODE_A;
	case MCP16502_OPMODE_LPM:
		return reg + MCP16502_OFFSET_MODE_LPM;
	case MCP16502_OPMODE_HIB:
		return reg + MCP16502_OFFSET_MODE_HIB;
	default:
		return -EINVAL;
	}
}

/*
 * mcp16502_get_mode() - return the current operating mode of a regulator
 *
 * Note: all functions that are not part of entering/exiting standby/suspend
 *	 use the Active mode registers.
 *
 * Note: this is different from the PMIC's operatig mode, it is the
 *	 MODE bit from the regulator's register.
 */
static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
{
	unsigned int val;
	int ret, reg;

	reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE);
	if (reg < 0)
		return reg;

	ret = regmap_read(rdev->regmap, reg, &val);
	if (ret)
		return ret;

	switch (val & MCP16502_MODE) {
	case MCP16502_MODE_FPWM:
		return REGULATOR_MODE_NORMAL;
	case MCP16502_MODE_AUTO_PFM:
		return REGULATOR_MODE_IDLE;
	default:
		return REGULATOR_MODE_INVALID;
	}
}

/*
 * _mcp16502_set_mode() - helper for set_mode and set_suspend_mode
 *
 * @rdev: the regulator for which we are setting the mode
 * @mode: the regulator's mode (the one from MODE bit)
 * @opmode: the PMIC's operating mode: Active/Low-power/Hibernate
 */
static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode,
			      unsigned int op_mode)
{
	int val;
	int reg;

	reg = mcp16502_get_reg(rdev, op_mode);
	if (reg < 0)
		return reg;

	switch (mode) {
	case REGULATOR_MODE_NORMAL:
		val = MCP16502_MODE_FPWM;
		break;
	case REGULATOR_MODE_IDLE:
		val = MCP16502_MODE_AUTO_PFM;
		break;
	default:
		return -EINVAL;
	}

	reg = regmap_update_bits(rdev->regmap, reg, MCP16502_MODE, val);
	return reg;
}

/*
 * mcp16502_set_mode() - regulator_ops set_mode
 */
static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
	return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_ACTIVE);
}

/*
 * mcp16502_get_status() - regulator_ops get_status
 */
static int mcp16502_get_status(struct regulator_dev *rdev)
{
	int ret;
	unsigned int val;

	ret = regmap_read(rdev->regmap, MCP16502_STAT_BASE(rdev_get_id(rdev)),
			  &val);
	if (ret)
		return ret;

	if (val & MCP16502_FLT)
		return REGULATOR_STATUS_ERROR;
	else if (val & MCP16502_ENS)
		return REGULATOR_STATUS_ON;
	else if (!(val & MCP16502_ENS))
		return REGULATOR_STATUS_OFF;

	return REGULATOR_STATUS_UNDEFINED;
}

#ifdef CONFIG_SUSPEND
/*
 * mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
 *				       mode
 */
static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev)
{
	switch (pm_suspend_target_state) {
	case PM_SUSPEND_STANDBY:
		return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM);
	case PM_SUSPEND_ON:
	case PM_SUSPEND_MEM:
		return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB);
	default:
		dev_err(&rdev->dev, "invalid suspend target: %d\n",
			pm_suspend_target_state);
	}

	return -EINVAL;
}

/*
 * mcp16502_set_suspend_voltage() - regulator_ops set_suspend_voltage
 */
static int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
	int sel = regulator_map_voltage_linear_range(rdev, uV, uV);
	int reg = mcp16502_suspend_get_target_reg(rdev);

	if (sel < 0)
		return sel;

	if (reg < 0)
		return reg;

	return regmap_update_bits(rdev->regmap, reg, MCP16502_VSEL, sel);
}

/*
 * mcp16502_set_suspend_mode() - regulator_ops set_suspend_mode
 */
static int mcp16502_set_suspend_mode(struct regulator_dev *rdev,
				     unsigned int mode)
{
	switch (pm_suspend_target_state) {
	case PM_SUSPEND_STANDBY:
		return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_LPM);
	case PM_SUSPEND_ON:
	case PM_SUSPEND_MEM:
		return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_HIB);
	default:
		dev_err(&rdev->dev, "invalid suspend target: %d\n",
			pm_suspend_target_state);
	}

	return -EINVAL;
}

/*
 * mcp16502_set_suspend_enable() - regulator_ops set_suspend_enable
 */
static int mcp16502_set_suspend_enable(struct regulator_dev *rdev)
{
	int reg = mcp16502_suspend_get_target_reg(rdev);

	if (reg < 0)
		return reg;

	return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, MCP16502_EN);
}

/*
 * mcp16502_set_suspend_disable() - regulator_ops set_suspend_disable
 */
static int mcp16502_set_suspend_disable(struct regulator_dev *rdev)
{
	int reg = mcp16502_suspend_get_target_reg(rdev);

	if (reg < 0)
		return reg;

	return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, 0);
}
#endif /* CONFIG_SUSPEND */

static const struct regulator_ops mcp16502_buck_ops = {
	.list_voltage			= regulator_list_voltage_linear_range,
	.map_voltage			= regulator_map_voltage_linear_range,
	.get_voltage_sel		= regulator_get_voltage_sel_regmap,
	.set_voltage_sel		= regulator_set_voltage_sel_regmap,
	.enable				= regulator_enable_regmap,
	.disable			= regulator_disable_regmap,
	.is_enabled			= regulator_is_enabled_regmap,
	.get_status			= mcp16502_get_status,

	.set_mode			= mcp16502_set_mode,
	.get_mode			= mcp16502_get_mode,

#ifdef CONFIG_SUSPEND
	.set_suspend_voltage		= mcp16502_set_suspend_voltage,
	.set_suspend_mode		= mcp16502_set_suspend_mode,
	.set_suspend_enable		= mcp16502_set_suspend_enable,
	.set_suspend_disable		= mcp16502_set_suspend_disable,
#endif /* CONFIG_SUSPEND */
};

/*
 * LDOs cannot change operating modes.
 */
static const struct regulator_ops mcp16502_ldo_ops = {
	.list_voltage			= regulator_list_voltage_linear_range,
	.map_voltage			= regulator_map_voltage_linear_range,
	.get_voltage_sel		= regulator_get_voltage_sel_regmap,
	.set_voltage_sel		= regulator_set_voltage_sel_regmap,
	.enable				= regulator_enable_regmap,
	.disable			= regulator_disable_regmap,
	.is_enabled			= regulator_is_enabled_regmap,
	.get_status			= mcp16502_get_status,

#ifdef CONFIG_SUSPEND
	.set_suspend_voltage		= mcp16502_set_suspend_voltage,
	.set_suspend_enable		= mcp16502_set_suspend_enable,
	.set_suspend_disable		= mcp16502_set_suspend_disable,
#endif /* CONFIG_SUSPEND */
};

static const struct of_device_id mcp16502_ids[] = {
	{ .compatible = "microchip,mcp16502", },
	{}
};
MODULE_DEVICE_TABLE(of, mcp16502_ids);

static const struct linear_range b1l12_ranges[] = {
	REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
};

static const struct linear_range b234_ranges[] = {
	REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
};

static const struct regulator_desc mcp16502_desc[] = {
	/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops) */
	MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops),
	MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops),
	MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops),
	MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops),
	MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops),
	MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops)
};

static const struct regmap_range mcp16502_ranges[] = {
	regmap_reg_range(MCP16502_MIN_REG, MCP16502_MAX_REG)
};

static const struct regmap_access_table mcp16502_yes_reg_table = {
	.yes_ranges = mcp16502_ranges,
	.n_yes_ranges = ARRAY_SIZE(mcp16502_ranges),
};

static const struct regmap_config mcp16502_regmap_config = {
	.reg_bits	= 8,
	.val_bits	= 8,
	.max_register	= MCP16502_MAX_REG,
	.cache_type	= REGCACHE_NONE,
	.rd_table	= &mcp16502_yes_reg_table,
	.wr_table	= &mcp16502_yes_reg_table,
};

static int mcp16502_probe(struct i2c_client *client,
			  const struct i2c_device_id *id)
{
	struct regulator_config config = { };
	struct regulator_dev *rdev;
	struct device *dev;
	struct mcp16502 *mcp;
	struct regmap *rmap;
	int i, ret;

	dev = &client->dev;
	config.dev = dev;

	mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
	if (!mcp)
		return -ENOMEM;

	rmap = devm_regmap_init_i2c(client, &mcp16502_regmap_config);
	if (IS_ERR(rmap)) {
		ret = PTR_ERR(rmap);
		dev_err(dev, "regmap init failed: %d\n", ret);
		return ret;
	}

	i2c_set_clientdata(client, mcp);
	config.regmap = rmap;
	config.driver_data = mcp;

	mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
	if (IS_ERR(mcp->lpm)) {
		dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
		return PTR_ERR(mcp->lpm);
	}

	for (i = 0; i < NUM_REGULATORS; i++) {
		rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
		if (IS_ERR(rdev)) {
			dev_err(dev,
				"failed to register %s regulator %ld\n",
				mcp16502_desc[i].name, PTR_ERR(rdev));
			return PTR_ERR(rdev);
		}
	}

	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);

	return 0;
}

#ifdef CONFIG_PM_SLEEP
static int mcp16502_suspend_noirq(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct mcp16502 *mcp = i2c_get_clientdata(client);

	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM);

	return 0;
}

static int mcp16502_resume_noirq(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct mcp16502 *mcp = i2c_get_clientdata(client);

	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);

	return 0;
}
#endif

#ifdef CONFIG_PM
static const struct dev_pm_ops mcp16502_pm_ops = {
	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,
				      mcp16502_resume_noirq)
};
#endif
static const struct i2c_device_id mcp16502_i2c_id[] = {
	{ "mcp16502", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);

static struct i2c_driver mcp16502_drv = {
	.probe		= mcp16502_probe,
	.driver		= {
		.name	= "mcp16502-regulator",
		.of_match_table	= of_match_ptr(mcp16502_ids),
#ifdef CONFIG_PM
		.pm = &mcp16502_pm_ops,
#endif
	},
	.id_table	= mcp16502_i2c_id,
};

module_i2c_driver(mcp16502_drv);

MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MCP16502 PMIC driver");
MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");
Commit	Line	Data
919261c0 AS	1	// SPDX-License-Identifier: GPL-2.0
	2	//
	3	// MCP16502 PMIC driver
	4	//
	5	// Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
	6	//
	7	// Author: Andrei Stefanescu <andrei.stefanescu@microchip.com>
	8	//
	9	// Inspired from tps65086-regulator.c
	10
	11	#include <linux/gpio.h>
	12	#include <linux/i2c.h>
	13	#include <linux/init.h>
	14	#include <linux/kernel.h>
	15	#include <linux/module.h>
	16	#include <linux/of.h>
	17	#include <linux/regmap.h>
	18	#include <linux/regulator/driver.h>
	19	#include <linux/suspend.h>
f3c6a1a1	20	#include <linux/gpio/consumer.h>
919261c0 AS	21
	22	#define VDD_LOW_SEL 0x0D
	23	#define VDD_HIGH_SEL 0x3F
	24
	25	#define MCP16502_FLT BIT(7)
	26	#define MCP16502_ENS BIT(0)
	27
	28	/*
	29	* The PMIC has four sets of registers corresponding to four power modes:
	30	* Performance, Active, Low-power, Hibernate.
	31	*
	32	* Registers:
	33	* Each regulator has a register for each power mode. To access a register
	34	* for a specific regulator and mode BASE_* and OFFSET_* need to be added.
	35	*
	36	* Operating modes:
	37	* In order for the PMIC to transition to operating modes it has to be
	38	* controlled via GPIO lines called LPM and HPM.
	39	*
	40	* The registers are fully configurable such that you can put all regulators in
	41	* a low-power state while the PMIC is in Active mode. They are supposed to be
	42	* configured at startup and then simply transition to/from a global low-power
	43	* state by setting the GPIO lpm pin high/low.
	44	*
	45	* This driver keeps the PMIC in Active mode, Low-power state is set for the
	46	* regulators by enabling/disabling operating mode (FPWM or Auto PFM).
	47	*
	48	* The PMIC's Low-power and Hibernate modes are used during standby/suspend.
	49	* To enter standby/suspend the PMIC will go to Low-power mode. From there, it
	50	* will transition to Hibernate when the PWRHLD line is set to low by the MPU.
	51	*/
	52
	53	/*
	54	* This function is useful for iterating over all regulators and accessing their
	55	* registers in a generic way or accessing a regulator device by its id.
	56	*/
	57	#define MCP16502_BASE(i) (((i) + 1) << 4)
	58	#define MCP16502_STAT_BASE(i) ((i) + 5)
	59
	60	#define MCP16502_OFFSET_MODE_A 0
	61	#define MCP16502_OFFSET_MODE_LPM 1
	62	#define MCP16502_OFFSET_MODE_HIB 2
	63
	64	#define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
	65	#define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
	66	#define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY
	67
	68	#define MCP16502_MODE_AUTO_PFM 0
	69	#define MCP16502_MODE_FPWM BIT(6)
	70
	71	#define MCP16502_VSEL 0x3F
	72	#define MCP16502_EN BIT(7)
	73	#define MCP16502_MODE BIT(6)
	74
	75	#define MCP16502_MIN_REG 0x0
	76	#define MCP16502_MAX_REG 0x65
	77
	78	static unsigned int mcp16502_of_map_mode(unsigned int mode)
	79	{
	80	if (mode == REGULATOR_MODE_NORMAL \|\| mode == REGULATOR_MODE_IDLE)
	81	return mode;
	82
	83	return REGULATOR_MODE_INVALID;
	84	}
85
86	#define MCP16502_REGULATOR(_name, _id, _ranges, _ops) \
87	[_id] = { \
88	.name = _name, \
89	.regulators_node = of_match_ptr("regulators"), \
90	.id = _id, \
91	.ops = &(_ops), \
92	.type = REGULATOR_VOLTAGE, \
93	.owner = THIS_MODULE, \
f4c8f980	94	.n_voltages = MCP16502_VSEL + 1, \
919261c0 AS	95	.linear_ranges = _ranges, \
	96	.n_linear_ranges = ARRAY_SIZE(_ranges), \
	97	.of_match = of_match_ptr(_name), \
	98	.of_map_mode = mcp16502_of_map_mode, \
	99	.vsel_reg = (((_id) + 1) << 4), \
	100	.vsel_mask = MCP16502_VSEL, \
	101	.enable_reg = (((_id) + 1) << 4), \
	102	.enable_mask = MCP16502_EN, \
	103	}
	104
	105	enum {
	106	BUCK1 = 0,
	107	BUCK2,
	108	BUCK3,
	109	BUCK4,
	110	LDO1,
	111	LDO2,
	112	NUM_REGULATORS
	113	};
	114
	115	/*
	116	* struct mcp16502 - PMIC representation
	117	* @rdev: the regulators belonging to this chip
	118	* @rmap: regmap to be used for I2C communication
	119	* @lpm: LPM GPIO descriptor
	120	*/
	121	struct mcp16502 {
919261c0 AS	122	struct gpio_desc *lpm;
	123	};
	124
	125	/*
	126	* mcp16502_gpio_set_mode() - set the GPIO corresponding value
	127	*
	128	* Used to prepare transitioning into hibernate or resuming from it.
	129	*/
	130	static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
	131	{
	132	switch (mode) {
	133	case MCP16502_OPMODE_ACTIVE:
	134	gpiod_set_value(mcp->lpm, 0);
	135	break;
	136	case MCP16502_OPMODE_LPM:
	137	case MCP16502_OPMODE_HIB:
	138	gpiod_set_value(mcp->lpm, 1);
	139	break;
	140	default:
	141	pr_err("%s: %d invalid\n", __func__, mode);
	142	}
	143	}
	144
	145	/*
	146	* mcp16502_get_reg() - get the PMIC's configuration register for opmode
	147	*
	148	* @rdev: the regulator whose register we are searching
	149	* @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
	150	*/
	151	static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode)
	152	{
	153	int reg = MCP16502_BASE(rdev_get_id(rdev));
	154
	155	switch (opmode) {
	156	case MCP16502_OPMODE_ACTIVE:
	157	return reg + MCP16502_OFFSET_MODE_A;
	158	case MCP16502_OPMODE_LPM:
	159	return reg + MCP16502_OFFSET_MODE_LPM;
	160	case MCP16502_OPMODE_HIB:
	161	return reg + MCP16502_OFFSET_MODE_HIB;
	162	default:
	163	return -EINVAL;
	164	}
	165	}
	166
	167	/*
	168	* mcp16502_get_mode() - return the current operating mode of a regulator
	169	*
	170	* Note: all functions that are not part of entering/exiting standby/suspend
	171	* use the Active mode registers.
	172	*
	173	* Note: this is different from the PMIC's operatig mode, it is the
	174	* MODE bit from the regulator's register.
	175	*/
	176	static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
	177	{
	178	unsigned int val;
	179	int ret, reg;
919261c0 AS	180
	181	reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE);
	182	if (reg < 0)
	183	return reg;
	184
4cf46953	185	ret = regmap_read(rdev->regmap, reg, &val);
919261c0 AS	186	if (ret)
	187	return ret;
	188
	189	switch (val & MCP16502_MODE) {
	190	case MCP16502_MODE_FPWM:
	191	return REGULATOR_MODE_NORMAL;
	192	case MCP16502_MODE_AUTO_PFM:
	193	return REGULATOR_MODE_IDLE;
	194	default:
	195	return REGULATOR_MODE_INVALID;
	196	}
	197	}
	198
	199	/*
	200	* _mcp16502_set_mode() - helper for set_mode and set_suspend_mode
	201	*
	202	* @rdev: the regulator for which we are setting the mode
	203	* @mode: the regulator's mode (the one from MODE bit)
	204	* @opmode: the PMIC's operating mode: Active/Low-power/Hibernate
	205	*/
	206	static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode,
	207	unsigned int op_mode)
	208	{
	209	int val;
	210	int reg;
919261c0 AS	211
	212	reg = mcp16502_get_reg(rdev, op_mode);
	213	if (reg < 0)
	214	return reg;
	215
	216	switch (mode) {
	217	case REGULATOR_MODE_NORMAL:
	218	val = MCP16502_MODE_FPWM;
	219	break;
	220	case REGULATOR_MODE_IDLE:
	221	val = MCP16502_MODE_AUTO_PFM;
	222	break;
	223	default:
	224	return -EINVAL;
	225	}
	226
4cf46953	227	reg = regmap_update_bits(rdev->regmap, reg, MCP16502_MODE, val);
919261c0 AS	228	return reg;
	229	}
	230
	231	/*
	232	* mcp16502_set_mode() - regulator_ops set_mode
	233	*/
	234	static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode)
	235	{
	236	return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_ACTIVE);
	237	}
	238
	239	/*
	240	* mcp16502_get_status() - regulator_ops get_status
	241	*/
	242	static int mcp16502_get_status(struct regulator_dev *rdev)
	243	{
	244	int ret;
	245	unsigned int val;
919261c0	246
4cf46953	247	ret = regmap_read(rdev->regmap, MCP16502_STAT_BASE(rdev_get_id(rdev)),
919261c0 AS	248	&val);
	249	if (ret)
	250	return ret;
	251
	252	if (val & MCP16502_FLT)
	253	return REGULATOR_STATUS_ERROR;
	254	else if (val & MCP16502_ENS)
	255	return REGULATOR_STATUS_ON;
	256	else if (!(val & MCP16502_ENS))
	257	return REGULATOR_STATUS_OFF;
	258
	259	return REGULATOR_STATUS_UNDEFINED;
	260	}
	261
	262	#ifdef CONFIG_SUSPEND
	263	/*
	264	* mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
	265	* mode
	266	*/
	267	static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev)
	268	{
	269	switch (pm_suspend_target_state) {
	270	case PM_SUSPEND_STANDBY:
	271	return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM);
	272	case PM_SUSPEND_ON:
	273	case PM_SUSPEND_MEM:
	274	return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB);
	275	default:
	276	dev_err(&rdev->dev, "invalid suspend target: %d\n",
	277	pm_suspend_target_state);
	278	}
	279
	280	return -EINVAL;
	281	}
	282
	283	/*
	284	* mcp16502_set_suspend_voltage() - regulator_ops set_suspend_voltage
	285	*/
	286	static int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV)
	287	{
919261c0 AS	288	int sel = regulator_map_voltage_linear_range(rdev, uV, uV);
	289	int reg = mcp16502_suspend_get_target_reg(rdev);
	290
	291	if (sel < 0)
	292	return sel;
	293
	294	if (reg < 0)
	295	return reg;
	296
4cf46953	297	return regmap_update_bits(rdev->regmap, reg, MCP16502_VSEL, sel);
919261c0 AS	298	}
	299
	300	/*
	301	* mcp16502_set_suspend_mode() - regulator_ops set_suspend_mode
	302	*/
	303	static int mcp16502_set_suspend_mode(struct regulator_dev *rdev,
	304	unsigned int mode)
	305	{
	306	switch (pm_suspend_target_state) {
	307	case PM_SUSPEND_STANDBY:
	308	return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_LPM);
	309	case PM_SUSPEND_ON:
	310	case PM_SUSPEND_MEM:
	311	return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_HIB);
	312	default:
	313	dev_err(&rdev->dev, "invalid suspend target: %d\n",
	314	pm_suspend_target_state);
	315	}
	316
	317	return -EINVAL;
	318	}
	319
	320	/*
	321	* mcp16502_set_suspend_enable() - regulator_ops set_suspend_enable
	322	*/
	323	static int mcp16502_set_suspend_enable(struct regulator_dev *rdev)
	324	{
919261c0 AS	325	int reg = mcp16502_suspend_get_target_reg(rdev);
	326
	327	if (reg < 0)
	328	return reg;
	329
4cf46953	330	return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, MCP16502_EN);
919261c0 AS	331	}
	332
	333	/*
	334	* mcp16502_set_suspend_disable() - regulator_ops set_suspend_disable
	335	*/
	336	static int mcp16502_set_suspend_disable(struct regulator_dev *rdev)
	337	{
919261c0 AS	338	int reg = mcp16502_suspend_get_target_reg(rdev);
	339
	340	if (reg < 0)
	341	return reg;
	342
4cf46953	343	return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, 0);
919261c0 AS	344	}
	345	#endif /* CONFIG_SUSPEND */
	346
	347	static const struct regulator_ops mcp16502_buck_ops = {
	348	.list_voltage = regulator_list_voltage_linear_range,
	349	.map_voltage = regulator_map_voltage_linear_range,
	350	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	351	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	352	.enable = regulator_enable_regmap,
	353	.disable = regulator_disable_regmap,
	354	.is_enabled = regulator_is_enabled_regmap,
	355	.get_status = mcp16502_get_status,
	356
	357	.set_mode = mcp16502_set_mode,
	358	.get_mode = mcp16502_get_mode,
	359
	360	#ifdef CONFIG_SUSPEND
	361	.set_suspend_voltage = mcp16502_set_suspend_voltage,
	362	.set_suspend_mode = mcp16502_set_suspend_mode,
	363	.set_suspend_enable = mcp16502_set_suspend_enable,
	364	.set_suspend_disable = mcp16502_set_suspend_disable,
	365	#endif /* CONFIG_SUSPEND */
	366	};
	367
	368	/*
	369	* LDOs cannot change operating modes.
	370	*/
	371	static const struct regulator_ops mcp16502_ldo_ops = {
	372	.list_voltage = regulator_list_voltage_linear_range,
	373	.map_voltage = regulator_map_voltage_linear_range,
	374	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	375	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	376	.enable = regulator_enable_regmap,
	377	.disable = regulator_disable_regmap,
	378	.is_enabled = regulator_is_enabled_regmap,
	379	.get_status = mcp16502_get_status,
	380
	381	#ifdef CONFIG_SUSPEND
	382	.set_suspend_voltage = mcp16502_set_suspend_voltage,
	383	.set_suspend_enable = mcp16502_set_suspend_enable,
	384	.set_suspend_disable = mcp16502_set_suspend_disable,
	385	#endif /* CONFIG_SUSPEND */
	386	};
	387
	388	static const struct of_device_id mcp16502_ids[] = {
	389	{ .compatible = "microchip,mcp16502", },
	390	{}
	391	};
	392	MODULE_DEVICE_TABLE(of, mcp16502_ids);
	393
60ab7f41	394	static const struct linear_range b1l12_ranges[] = {
919261c0 AS	395	REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
	396	};
	397
60ab7f41	398	static const struct linear_range b234_ranges[] = {
919261c0 AS	399	REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
	400	};
	401
	402	static const struct regulator_desc mcp16502_desc[] = {
	403	/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops) */
	404	MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops),
	405	MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops),
	406	MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops),
	407	MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops),
	408	MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops),
	409	MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops)
	410	};
	411
	412	static const struct regmap_range mcp16502_ranges[] = {
	413	regmap_reg_range(MCP16502_MIN_REG, MCP16502_MAX_REG)
	414	};
	415
	416	static const struct regmap_access_table mcp16502_yes_reg_table = {
	417	.yes_ranges = mcp16502_ranges,
	418	.n_yes_ranges = ARRAY_SIZE(mcp16502_ranges),
	419	};
	420
	421	static const struct regmap_config mcp16502_regmap_config = {
	422	.reg_bits = 8,
	423	.val_bits = 8,
	424	.max_register = MCP16502_MAX_REG,
	425	.cache_type = REGCACHE_NONE,
	426	.rd_table = &mcp16502_yes_reg_table,
	427	.wr_table = &mcp16502_yes_reg_table,
	428	};
	429
919261c0 AS	430	static int mcp16502_probe(struct i2c_client *client,
	431	const struct i2c_device_id *id)
	432	{
	433	struct regulator_config config = { };
784c24c3	434	struct regulator_dev *rdev;
919261c0 AS	435	struct device *dev;
919261c0 AS	436	struct mcp16502 *mcp;
4cf46953	437	struct regmap *rmap;
784c24c3	438	int i, ret;
919261c0 AS	439
	440	dev = &client->dev;
	441	config.dev = dev;
	442
	443	mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
	444	if (!mcp)
	445	return -ENOMEM;
	446
4cf46953 AL	447	rmap = devm_regmap_init_i2c(client, &mcp16502_regmap_config);
	448	if (IS_ERR(rmap)) {
	449	ret = PTR_ERR(rmap);
919261c0 AS	450	dev_err(dev, "regmap init failed: %d\n", ret);
	451	return ret;
	452	}
	453
	454	i2c_set_clientdata(client, mcp);
4cf46953	455	config.regmap = rmap;
919261c0 AS	456	config.driver_data = mcp;
	457
	458	mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
	459	if (IS_ERR(mcp->lpm)) {
	460	dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
	461	return PTR_ERR(mcp->lpm);
	462	}
	463
784c24c3 AL	464	for (i = 0; i < NUM_REGULATORS; i++) {
	465	rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
	466	if (IS_ERR(rdev)) {
	467	dev_err(dev,
	468	"failed to register %s regulator %ld\n",
	469	mcp16502_desc[i].name, PTR_ERR(rdev));
	470	return PTR_ERR(rdev);
	471	}
	472	}
919261c0 AS	473
	474	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
	475
	476	return 0;
	477	}
	478
4906d091	479	#ifdef CONFIG_PM_SLEEP
fc401cb9 AS	480	static int mcp16502_suspend_noirq(struct device *dev)
	481	{
	482	struct i2c_client *client = to_i2c_client(dev);
	483	struct mcp16502 *mcp = i2c_get_clientdata(client);
	484
	485	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM);
	486
	487	return 0;
	488	}
	489
	490	static int mcp16502_resume_noirq(struct device *dev)
	491	{
	492	struct i2c_client *client = to_i2c_client(dev);
	493	struct mcp16502 *mcp = i2c_get_clientdata(client);
	494
	495	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
	496
	497	return 0;
	498	}
4906d091	499	#endif
fc401cb9 AS	500
	501	#ifdef CONFIG_PM
	502	static const struct dev_pm_ops mcp16502_pm_ops = {
	503	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,
308144ce	504	mcp16502_resume_noirq)
fc401cb9 AS	505	};
fc401cb9 AS	506	#endif
919261c0 AS	507	static const struct i2c_device_id mcp16502_i2c_id[] = {
	508	{ "mcp16502", 0 },
	509	{ }
	510	};
	511	MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);
	512
	513	static struct i2c_driver mcp16502_drv = {
	514	.probe = mcp16502_probe,
	515	.driver = {
	516	.name = "mcp16502-regulator",
	517	.of_match_table = of_match_ptr(mcp16502_ids),
fc401cb9 AS	518	#ifdef CONFIG_PM
	519	.pm = &mcp16502_pm_ops,
	520	#endif
919261c0 AS	521	},
	522	.id_table = mcp16502_i2c_id,
	523	};
	524
	525	module_i2c_driver(mcp16502_drv);
	526
919261c0 AS	527	MODULE_LICENSE("GPL v2");
	528	MODULE_DESCRIPTION("MCP16502 PMIC driver");
	529	MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");