[linux-block.git] / drivers / regulator / mcp16502.c

// SPDX-License-Identifier: GPL-2.0
//
// MCP16502 PMIC driver
//
// Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
//
// Author: Andrei Stefanescu <andrei.stefanescu@microchip.com>
//
// Inspired from tps65086-regulator.c

#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/suspend.h>
#include <linux/gpio/consumer.h>

#define VDD_LOW_SEL 0x0D
#define VDD_HIGH_SEL 0x3F

#define MCP16502_FLT		BIT(7)
#define MCP16502_DVSR		GENMASK(3, 2)
#define MCP16502_ENS		BIT(0)

/*
 * The PMIC has four sets of registers corresponding to four power modes:
 * Performance, Active, Low-power, Hibernate.
 *
 * Registers:
 * Each regulator has a register for each power mode. To access a register
 * for a specific regulator and mode BASE_* and OFFSET_* need to be added.
 *
 * Operating modes:
 * In order for the PMIC to transition to operating modes it has to be
 * controlled via GPIO lines called LPM and HPM.
 *
 * The registers are fully configurable such that you can put all regulators in
 * a low-power state while the PMIC is in Active mode. They are supposed to be
 * configured at startup and then simply transition to/from a global low-power
 * state by setting the GPIO lpm pin high/low.
 *
 * This driver keeps the PMIC in Active mode, Low-power state is set for the
 * regulators by enabling/disabling operating mode (FPWM or Auto PFM).
 *
 * The PMIC's Low-power and Hibernate modes are used during standby/suspend.
 * To enter standby/suspend the PMIC will go to Low-power mode. From there, it
 * will transition to Hibernate when the PWRHLD line is set to low by the MPU.
 */

/*
 * This function is useful for iterating over all regulators and accessing their
 * registers in a generic way or accessing a regulator device by its id.
 */
#define MCP16502_REG_BASE(i, r) ((((i) + 1) << 4) + MCP16502_REG_##r)
#define MCP16502_STAT_BASE(i) ((i) + 5)

#define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
#define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
#define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY

#define MCP16502_MODE_AUTO_PFM 0
#define MCP16502_MODE_FPWM BIT(6)

#define MCP16502_VSEL 0x3F
#define MCP16502_EN BIT(7)
#define MCP16502_MODE BIT(6)

#define MCP16502_MIN_REG 0x0
#define MCP16502_MAX_REG 0x65

/**
 * enum mcp16502_reg - MCP16502 regulators's registers
 * @MCP16502_REG_A: active state register
 * @MCP16502_REG_LPM: low power mode state register
 * @MCP16502_REG_HIB: hibernate state register
 * @MCP16502_REG_HPM: high-performance mode register
 * @MCP16502_REG_SEQ: startup sequence register
 * @MCP16502_REG_CFG: configuration register
 */
enum mcp16502_reg {
	MCP16502_REG_A,
	MCP16502_REG_LPM,
	MCP16502_REG_HIB,
	MCP16502_REG_HPM,
	MCP16502_REG_SEQ,
	MCP16502_REG_CFG,
};

/* Ramp delay (uV/us) for buck1, ldo1, ldo2. */
static const unsigned int mcp16502_ramp_b1l12[] = {
	6250, 3125, 2083, 1563
};

/* Ramp delay (uV/us) for buck2, buck3, buck4. */
static const unsigned int mcp16502_ramp_b234[] = {
	3125, 1563, 1042, 781
};

static unsigned int mcp16502_of_map_mode(unsigned int mode)
{
	if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
		return mode;

	return REGULATOR_MODE_INVALID;
}

#define MCP16502_REGULATOR(_name, _id, _ranges, _ops, _ramp_table)	\
	[_id] = {							\
		.name			= _name,			\
		.regulators_node	= of_match_ptr("regulators"),	\
		.id			= _id,				\
		.ops			= &(_ops),			\
		.type			= REGULATOR_VOLTAGE,		\
		.owner			= THIS_MODULE,			\
		.n_voltages		= MCP16502_VSEL + 1,		\
		.linear_ranges		= _ranges,			\
		.linear_min_sel		= VDD_LOW_SEL,			\
		.n_linear_ranges	= ARRAY_SIZE(_ranges),		\
		.of_match		= of_match_ptr(_name),		\
		.of_map_mode		= mcp16502_of_map_mode,		\
		.vsel_reg		= (((_id) + 1) << 4),		\
		.vsel_mask		= MCP16502_VSEL,		\
		.enable_reg		= (((_id) + 1) << 4),		\
		.enable_mask		= MCP16502_EN,			\
		.ramp_reg		= MCP16502_REG_BASE(_id, CFG),	\
		.ramp_mask		= MCP16502_DVSR,		\
		.ramp_delay_table	= _ramp_table,			\
		.n_ramp_values		= ARRAY_SIZE(_ramp_table),	\
	}

enum {
	BUCK1 = 0,
	BUCK2,
	BUCK3,
	BUCK4,
	LDO1,
	LDO2,
	NUM_REGULATORS
};

/*
 * struct mcp16502 - PMIC representation
 * @lpm: LPM GPIO descriptor
 */
struct mcp16502 {
	struct gpio_desc *lpm;
};

/*
 * mcp16502_gpio_set_mode() - set the GPIO corresponding value
 *
 * Used to prepare transitioning into hibernate or resuming from it.
 */
static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
{
	switch (mode) {
	case MCP16502_OPMODE_ACTIVE:
		gpiod_set_value(mcp->lpm, 0);
		break;
	case MCP16502_OPMODE_LPM:
	case MCP16502_OPMODE_HIB:
		gpiod_set_value(mcp->lpm, 1);
		break;
	default:
		pr_err("%s: %d invalid\n", __func__, mode);
	}
}

/*
 * mcp16502_get_reg() - get the PMIC's state configuration register for opmode
 *
 * @rdev: the regulator whose register we are searching
 * @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
 */
static int mcp16502_get_state_reg(struct regulator_dev *rdev, int opmode)
{
	switch (opmode) {
	case MCP16502_OPMODE_ACTIVE:
		return MCP16502_REG_BASE(rdev_get_id(rdev), A);
	case MCP16502_OPMODE_LPM:
		return MCP16502_REG_BASE(rdev_get_id(rdev), LPM);
	case MCP16502_OPMODE_HIB:
		return MCP16502_REG_BASE(rdev_get_id(rdev), HIB);
	default:
		return -EINVAL;
	}
}

/*
 * mcp16502_get_mode() - return the current operating mode of a regulator
 *
 * Note: all functions that are not part of entering/exiting standby/suspend
 *	 use the Active mode registers.
 *
 * Note: this is different from the PMIC's operatig mode, it is the
 *	 MODE bit from the regulator's register.
 */
static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
{
	unsigned int val;
	int ret, reg;

	reg = mcp16502_get_state_reg(rdev, MCP16502_OPMODE_ACTIVE);
	if (reg < 0)
		return reg;

	ret = regmap_read(rdev->regmap, reg, &val);
	if (ret)
		return ret;

	switch (val & MCP16502_MODE) {
	case MCP16502_MODE_FPWM:
		return REGULATOR_MODE_NORMAL;
	case MCP16502_MODE_AUTO_PFM:
		return REGULATOR_MODE_IDLE;
	default:
		return REGULATOR_MODE_INVALID;
	}
}

/*
 * _mcp16502_set_mode() - helper for set_mode and set_suspend_mode
 *
 * @rdev: the regulator for which we are setting the mode
 * @mode: the regulator's mode (the one from MODE bit)
 * @opmode: the PMIC's operating mode: Active/Low-power/Hibernate
 */
static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode,
			      unsigned int op_mode)
{
	int val;
	int reg;

	reg = mcp16502_get_state_reg(rdev, op_mode);
	if (reg < 0)
		return reg;

	switch (mode) {
	case REGULATOR_MODE_NORMAL:
		val = MCP16502_MODE_FPWM;
		break;
	case REGULATOR_MODE_IDLE:
		val = MCP16502_MODE_AUTO_PFM;
		break;
	default:
		return -EINVAL;
	}

	reg = regmap_update_bits(rdev->regmap, reg, MCP16502_MODE, val);
	return reg;
}

/*
 * mcp16502_set_mode() - regulator_ops set_mode
 */
static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
	return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_ACTIVE);
}

/*
 * mcp16502_get_status() - regulator_ops get_status
 */
static int mcp16502_get_status(struct regulator_dev *rdev)
{
	int ret;
	unsigned int val;

	ret = regmap_read(rdev->regmap, MCP16502_STAT_BASE(rdev_get_id(rdev)),
			  &val);
	if (ret)
		return ret;

	if (val & MCP16502_FLT)
		return REGULATOR_STATUS_ERROR;
	else if (val & MCP16502_ENS)
		return REGULATOR_STATUS_ON;
	else if (!(val & MCP16502_ENS))
		return REGULATOR_STATUS_OFF;

	return REGULATOR_STATUS_UNDEFINED;
}

static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev,
					 unsigned int old_sel,
					 unsigned int new_sel)
{
	static const u8 us_ramp[] = { 8, 16, 24, 32 };
	int id = rdev_get_id(rdev);
	unsigned int uV_delta, val;
	int ret;

	ret = regmap_read(rdev->regmap, MCP16502_REG_BASE(id, CFG), &val);
	if (ret)
		return ret;

	val = (val & MCP16502_DVSR) >> 2;
	uV_delta = abs(new_sel * rdev->desc->linear_ranges->step -
		       old_sel * rdev->desc->linear_ranges->step);
	switch (id) {
	case BUCK1:
	case LDO1:
	case LDO2:
		ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
					mcp16502_ramp_b1l12[val]);
		break;

	case BUCK2:
	case BUCK3:
	case BUCK4:
		ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
					mcp16502_ramp_b234[val]);
		break;

	default:
		return -EINVAL;
	}

	return ret;
}

#ifdef CONFIG_SUSPEND
/*
 * mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
 *				       mode
 */
static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev)
{
	switch (pm_suspend_target_state) {
	case PM_SUSPEND_STANDBY:
		return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_LPM);
	case PM_SUSPEND_ON:
	case PM_SUSPEND_MEM:
		return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_HIB);
	default:
		dev_err(&rdev->dev, "invalid suspend target: %d\n",
			pm_suspend_target_state);
	}

	return -EINVAL;
}

/*
 * mcp16502_set_suspend_voltage() - regulator_ops set_suspend_voltage
 */
static int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
	int sel = regulator_map_voltage_linear_range(rdev, uV, uV);
	int reg = mcp16502_suspend_get_target_reg(rdev);

	if (sel < 0)
		return sel;

	if (reg < 0)
		return reg;

	return regmap_update_bits(rdev->regmap, reg, MCP16502_VSEL, sel);
}

/*
 * mcp16502_set_suspend_mode() - regulator_ops set_suspend_mode
 */
static int mcp16502_set_suspend_mode(struct regulator_dev *rdev,
				     unsigned int mode)
{
	switch (pm_suspend_target_state) {
	case PM_SUSPEND_STANDBY:
		return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_LPM);
	case PM_SUSPEND_ON:
	case PM_SUSPEND_MEM:
		return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_HIB);
	default:
		dev_err(&rdev->dev, "invalid suspend target: %d\n",
			pm_suspend_target_state);
	}

	return -EINVAL;
}

/*
 * mcp16502_set_suspend_enable() - regulator_ops set_suspend_enable
 */
static int mcp16502_set_suspend_enable(struct regulator_dev *rdev)
{
	int reg = mcp16502_suspend_get_target_reg(rdev);

	if (reg < 0)
		return reg;

	return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, MCP16502_EN);
}

/*
 * mcp16502_set_suspend_disable() - regulator_ops set_suspend_disable
 */
static int mcp16502_set_suspend_disable(struct regulator_dev *rdev)
{
	int reg = mcp16502_suspend_get_target_reg(rdev);

	if (reg < 0)
		return reg;

	return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, 0);
}
#endif /* CONFIG_SUSPEND */

static const struct regulator_ops mcp16502_buck_ops = {
	.list_voltage			= regulator_list_voltage_linear_range,
	.map_voltage			= regulator_map_voltage_linear_range,
	.get_voltage_sel		= regulator_get_voltage_sel_regmap,
	.set_voltage_sel		= regulator_set_voltage_sel_regmap,
	.enable				= regulator_enable_regmap,
	.disable			= regulator_disable_regmap,
	.is_enabled			= regulator_is_enabled_regmap,
	.get_status			= mcp16502_get_status,
	.set_voltage_time_sel		= mcp16502_set_voltage_time_sel,
	.set_ramp_delay			= regulator_set_ramp_delay_regmap,

	.set_mode			= mcp16502_set_mode,
	.get_mode			= mcp16502_get_mode,

#ifdef CONFIG_SUSPEND
	.set_suspend_voltage		= mcp16502_set_suspend_voltage,
	.set_suspend_mode		= mcp16502_set_suspend_mode,
	.set_suspend_enable		= mcp16502_set_suspend_enable,
	.set_suspend_disable		= mcp16502_set_suspend_disable,
#endif /* CONFIG_SUSPEND */
};

/*
 * LDOs cannot change operating modes.
 */
static const struct regulator_ops mcp16502_ldo_ops = {
	.list_voltage			= regulator_list_voltage_linear_range,
	.map_voltage			= regulator_map_voltage_linear_range,
	.get_voltage_sel		= regulator_get_voltage_sel_regmap,
	.set_voltage_sel		= regulator_set_voltage_sel_regmap,
	.enable				= regulator_enable_regmap,
	.disable			= regulator_disable_regmap,
	.is_enabled			= regulator_is_enabled_regmap,
	.get_status			= mcp16502_get_status,
	.set_voltage_time_sel		= mcp16502_set_voltage_time_sel,
	.set_ramp_delay			= regulator_set_ramp_delay_regmap,

#ifdef CONFIG_SUSPEND
	.set_suspend_voltage		= mcp16502_set_suspend_voltage,
	.set_suspend_enable		= mcp16502_set_suspend_enable,
	.set_suspend_disable		= mcp16502_set_suspend_disable,
#endif /* CONFIG_SUSPEND */
};

static const struct of_device_id mcp16502_ids[] = {
	{ .compatible = "microchip,mcp16502", },
	{}
};
MODULE_DEVICE_TABLE(of, mcp16502_ids);

static const struct linear_range b1l12_ranges[] = {
	REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
};

static const struct linear_range b234_ranges[] = {
	REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
};

static const struct regulator_desc mcp16502_desc[] = {
	/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops, ramp_table) */
	MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops,
			   mcp16502_ramp_b1l12),
	MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops,
			   mcp16502_ramp_b234),
	MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops,
			   mcp16502_ramp_b234),
	MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops,
			   mcp16502_ramp_b234),
	MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops,
			   mcp16502_ramp_b1l12),
	MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops,
			   mcp16502_ramp_b1l12)
};

static const struct regmap_range mcp16502_ranges[] = {
	regmap_reg_range(MCP16502_MIN_REG, MCP16502_MAX_REG)
};

static const struct regmap_access_table mcp16502_yes_reg_table = {
	.yes_ranges = mcp16502_ranges,
	.n_yes_ranges = ARRAY_SIZE(mcp16502_ranges),
};

static const struct regmap_config mcp16502_regmap_config = {
	.reg_bits	= 8,
	.val_bits	= 8,
	.max_register	= MCP16502_MAX_REG,
	.cache_type	= REGCACHE_NONE,
	.rd_table	= &mcp16502_yes_reg_table,
	.wr_table	= &mcp16502_yes_reg_table,
};

static int mcp16502_probe(struct i2c_client *client)
{
	struct regulator_config config = { };
	struct regulator_dev *rdev;
	struct device *dev;
	struct mcp16502 *mcp;
	struct regmap *rmap;
	int i, ret;

	dev = &client->dev;
	config.dev = dev;

	mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
	if (!mcp)
		return -ENOMEM;

	rmap = devm_regmap_init_i2c(client, &mcp16502_regmap_config);
	if (IS_ERR(rmap)) {
		ret = PTR_ERR(rmap);
		dev_err(dev, "regmap init failed: %d\n", ret);
		return ret;
	}

	i2c_set_clientdata(client, mcp);
	config.regmap = rmap;
	config.driver_data = mcp;

	mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW);
	if (IS_ERR(mcp->lpm)) {
		dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
		return PTR_ERR(mcp->lpm);
	}

	for (i = 0; i < NUM_REGULATORS; i++) {
		rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
		if (IS_ERR(rdev)) {
			dev_err(dev,
				"failed to register %s regulator %ld\n",
				mcp16502_desc[i].name, PTR_ERR(rdev));
			return PTR_ERR(rdev);
		}
	}

	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);

	return 0;
}

#ifdef CONFIG_PM_SLEEP
static int mcp16502_suspend_noirq(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct mcp16502 *mcp = i2c_get_clientdata(client);

	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM);

	return 0;
}

static int mcp16502_resume_noirq(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct mcp16502 *mcp = i2c_get_clientdata(client);

	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);

	return 0;
}
#endif

#ifdef CONFIG_PM
static const struct dev_pm_ops mcp16502_pm_ops = {
	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,
				      mcp16502_resume_noirq)
};
#endif
static const struct i2c_device_id mcp16502_i2c_id[] = {
	{ "mcp16502", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);

static struct i2c_driver mcp16502_drv = {
	.probe		= mcp16502_probe,
	.driver		= {
		.name	= "mcp16502-regulator",
		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
		.of_match_table	= of_match_ptr(mcp16502_ids),
#ifdef CONFIG_PM
		.pm = &mcp16502_pm_ops,
#endif
	},
	.id_table	= mcp16502_i2c_id,
};

module_i2c_driver(mcp16502_drv);

MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MCP16502 PMIC driver");
MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");
Commit	Line	Data
919261c0 AS	1	// SPDX-License-Identifier: GPL-2.0
	2	//
	3	// MCP16502 PMIC driver
	4	//
	5	// Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
	6	//
	7	// Author: Andrei Stefanescu <andrei.stefanescu@microchip.com>
	8	//
	9	// Inspired from tps65086-regulator.c
	10
	11	#include <linux/gpio.h>
	12	#include <linux/i2c.h>
	13	#include <linux/init.h>
	14	#include <linux/kernel.h>
	15	#include <linux/module.h>
	16	#include <linux/of.h>
	17	#include <linux/regmap.h>
	18	#include <linux/regulator/driver.h>
	19	#include <linux/suspend.h>
f3c6a1a1	20	#include <linux/gpio/consumer.h>
919261c0 AS	21
	22	#define VDD_LOW_SEL 0x0D
	23	#define VDD_HIGH_SEL 0x3F
	24
322eb866 CB	25	#define MCP16502_FLT BIT(7)
	26	#define MCP16502_DVSR GENMASK(3, 2)
	27	#define MCP16502_ENS BIT(0)
919261c0 AS	28
	29	/*
	30	* The PMIC has four sets of registers corresponding to four power modes:
	31	* Performance, Active, Low-power, Hibernate.
	32	*
	33	* Registers:
	34	* Each regulator has a register for each power mode. To access a register
	35	* for a specific regulator and mode BASE_* and OFFSET_* need to be added.
	36	*
	37	* Operating modes:
	38	* In order for the PMIC to transition to operating modes it has to be
	39	* controlled via GPIO lines called LPM and HPM.
	40	*
	41	* The registers are fully configurable such that you can put all regulators in
	42	* a low-power state while the PMIC is in Active mode. They are supposed to be
	43	* configured at startup and then simply transition to/from a global low-power
	44	* state by setting the GPIO lpm pin high/low.
	45	*
	46	* This driver keeps the PMIC in Active mode, Low-power state is set for the
	47	* regulators by enabling/disabling operating mode (FPWM or Auto PFM).
	48	*
	49	* The PMIC's Low-power and Hibernate modes are used during standby/suspend.
	50	* To enter standby/suspend the PMIC will go to Low-power mode. From there, it
	51	* will transition to Hibernate when the PWRHLD line is set to low by the MPU.
	52	*/
	53
	54	/*
	55	* This function is useful for iterating over all regulators and accessing their
	56	* registers in a generic way or accessing a regulator device by its id.
	57	*/
3e5532a0	58	#define MCP16502_REG_BASE(i, r) ((((i) + 1) << 4) + MCP16502_REG_##r)
919261c0 AS	59	#define MCP16502_STAT_BASE(i) ((i) + 5)
919261c0 AS	60
919261c0 AS	61	#define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
	62	#define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
	63	#define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY
	64
	65	#define MCP16502_MODE_AUTO_PFM 0
	66	#define MCP16502_MODE_FPWM BIT(6)
	67
	68	#define MCP16502_VSEL 0x3F
	69	#define MCP16502_EN BIT(7)
	70	#define MCP16502_MODE BIT(6)
	71
	72	#define MCP16502_MIN_REG 0x0
	73	#define MCP16502_MAX_REG 0x65
	74
3e5532a0 CB	75	/**
	76	* enum mcp16502_reg - MCP16502 regulators's registers
	77	* @MCP16502_REG_A: active state register
	78	* @MCP16502_REG_LPM: low power mode state register
	79	* @MCP16502_REG_HIB: hibernate state register
84c13763	80	* @MCP16502_REG_HPM: high-performance mode register
3e5532a0 CB	81	* @MCP16502_REG_SEQ: startup sequence register
	82	* @MCP16502_REG_CFG: configuration register
	83	*/
	84	enum mcp16502_reg {
	85	MCP16502_REG_A,
	86	MCP16502_REG_LPM,
	87	MCP16502_REG_HIB,
	88	MCP16502_REG_HPM,
	89	MCP16502_REG_SEQ,
	90	MCP16502_REG_CFG,
	91	};
	92
322eb866	93	/* Ramp delay (uV/us) for buck1, ldo1, ldo2. */
96ec5afe AL	94	static const unsigned int mcp16502_ramp_b1l12[] = {
	95	6250, 3125, 2083, 1563
	96	};
322eb866 CB	97
322eb866 CB	98	/* Ramp delay (uV/us) for buck2, buck3, buck4. */
96ec5afe AL	99	static const unsigned int mcp16502_ramp_b234[] = {
	100	3125, 1563, 1042, 781
	101	};
322eb866	102
919261c0 AS	103	static unsigned int mcp16502_of_map_mode(unsigned int mode)
	104	{
	105	if (mode == REGULATOR_MODE_NORMAL \|\| mode == REGULATOR_MODE_IDLE)
	106	return mode;
	107
	108	return REGULATOR_MODE_INVALID;
	109	}
	110
96ec5afe	111	#define MCP16502_REGULATOR(_name, _id, _ranges, _ops, _ramp_table) \
919261c0 AS	112	[_id] = { \
	113	.name = _name, \
	114	.regulators_node = of_match_ptr("regulators"), \
	115	.id = _id, \
	116	.ops = &(_ops), \
	117	.type = REGULATOR_VOLTAGE, \
	118	.owner = THIS_MODULE, \
f4c8f980	119	.n_voltages = MCP16502_VSEL + 1, \
919261c0	120	.linear_ranges = _ranges, \
478f8089	121	.linear_min_sel = VDD_LOW_SEL, \
919261c0 AS	122	.n_linear_ranges = ARRAY_SIZE(_ranges), \
	123	.of_match = of_match_ptr(_name), \
	124	.of_map_mode = mcp16502_of_map_mode, \
	125	.vsel_reg = (((_id) + 1) << 4), \
	126	.vsel_mask = MCP16502_VSEL, \
	127	.enable_reg = (((_id) + 1) << 4), \
	128	.enable_mask = MCP16502_EN, \
96ec5afe AL	129	.ramp_reg = MCP16502_REG_BASE(_id, CFG), \
	130	.ramp_mask = MCP16502_DVSR, \
	131	.ramp_delay_table = _ramp_table, \
	132	.n_ramp_values = ARRAY_SIZE(_ramp_table), \
919261c0 AS	133	}
	134
	135	enum {
	136	BUCK1 = 0,
	137	BUCK2,
	138	BUCK3,
	139	BUCK4,
	140	LDO1,
	141	LDO2,
	142	NUM_REGULATORS
	143	};
	144
	145	/*
	146	* struct mcp16502 - PMIC representation
919261c0 AS	147	* @lpm: LPM GPIO descriptor
	148	*/
	149	struct mcp16502 {
919261c0 AS	150	struct gpio_desc *lpm;
	151	};
	152
	153	/*
	154	* mcp16502_gpio_set_mode() - set the GPIO corresponding value
	155	*
	156	* Used to prepare transitioning into hibernate or resuming from it.
	157	*/
	158	static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
	159	{
	160	switch (mode) {
	161	case MCP16502_OPMODE_ACTIVE:
	162	gpiod_set_value(mcp->lpm, 0);
	163	break;
	164	case MCP16502_OPMODE_LPM:
	165	case MCP16502_OPMODE_HIB:
	166	gpiod_set_value(mcp->lpm, 1);
	167	break;
	168	default:
	169	pr_err("%s: %d invalid\n", __func__, mode);
	170	}
	171	}
	172
	173	/*
3e5532a0	174	* mcp16502_get_reg() - get the PMIC's state configuration register for opmode
919261c0 AS	175	*
	176	* @rdev: the regulator whose register we are searching
	177	* @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
	178	*/
3e5532a0	179	static int mcp16502_get_state_reg(struct regulator_dev *rdev, int opmode)
919261c0	180	{
919261c0 AS	181	switch (opmode) {
919261c0 AS	182	case MCP16502_OPMODE_ACTIVE:
3e5532a0	183	return MCP16502_REG_BASE(rdev_get_id(rdev), A);
919261c0	184	case MCP16502_OPMODE_LPM:
3e5532a0	185	return MCP16502_REG_BASE(rdev_get_id(rdev), LPM);
919261c0	186	case MCP16502_OPMODE_HIB:
3e5532a0	187	return MCP16502_REG_BASE(rdev_get_id(rdev), HIB);
919261c0 AS	188	default:
	189	return -EINVAL;
	190	}
	191	}
	192
	193	/*
	194	* mcp16502_get_mode() - return the current operating mode of a regulator
	195	*
	196	* Note: all functions that are not part of entering/exiting standby/suspend
	197	* use the Active mode registers.
	198	*
	199	* Note: this is different from the PMIC's operatig mode, it is the
	200	* MODE bit from the regulator's register.
	201	*/
	202	static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
	203	{
	204	unsigned int val;
	205	int ret, reg;
919261c0	206
3e5532a0	207	reg = mcp16502_get_state_reg(rdev, MCP16502_OPMODE_ACTIVE);
919261c0 AS	208	if (reg < 0)
	209	return reg;
	210
4cf46953	211	ret = regmap_read(rdev->regmap, reg, &val);
919261c0 AS	212	if (ret)
	213	return ret;
	214
	215	switch (val & MCP16502_MODE) {
	216	case MCP16502_MODE_FPWM:
	217	return REGULATOR_MODE_NORMAL;
	218	case MCP16502_MODE_AUTO_PFM:
	219	return REGULATOR_MODE_IDLE;
	220	default:
	221	return REGULATOR_MODE_INVALID;
	222	}
	223	}
	224
	225	/*
	226	* _mcp16502_set_mode() - helper for set_mode and set_suspend_mode
	227	*
	228	* @rdev: the regulator for which we are setting the mode
	229	* @mode: the regulator's mode (the one from MODE bit)
	230	* @opmode: the PMIC's operating mode: Active/Low-power/Hibernate
	231	*/
	232	static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode,
	233	unsigned int op_mode)
	234	{
	235	int val;
	236	int reg;
919261c0	237
3e5532a0	238	reg = mcp16502_get_state_reg(rdev, op_mode);
919261c0 AS	239	if (reg < 0)
	240	return reg;
	241
	242	switch (mode) {
	243	case REGULATOR_MODE_NORMAL:
	244	val = MCP16502_MODE_FPWM;
	245	break;
	246	case REGULATOR_MODE_IDLE:
	247	val = MCP16502_MODE_AUTO_PFM;
	248	break;
	249	default:
	250	return -EINVAL;
	251	}
	252
4cf46953	253	reg = regmap_update_bits(rdev->regmap, reg, MCP16502_MODE, val);
919261c0 AS	254	return reg;
	255	}
	256
	257	/*
	258	* mcp16502_set_mode() - regulator_ops set_mode
	259	*/
	260	static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode)
	261	{
	262	return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_ACTIVE);
	263	}
	264
	265	/*
	266	* mcp16502_get_status() - regulator_ops get_status
	267	*/
	268	static int mcp16502_get_status(struct regulator_dev *rdev)
	269	{
	270	int ret;
	271	unsigned int val;
919261c0	272
4cf46953	273	ret = regmap_read(rdev->regmap, MCP16502_STAT_BASE(rdev_get_id(rdev)),
919261c0 AS	274	&val);
	275	if (ret)
	276	return ret;
	277
	278	if (val & MCP16502_FLT)
	279	return REGULATOR_STATUS_ERROR;
	280	else if (val & MCP16502_ENS)
	281	return REGULATOR_STATUS_ON;
	282	else if (!(val & MCP16502_ENS))
	283	return REGULATOR_STATUS_OFF;
	284
	285	return REGULATOR_STATUS_UNDEFINED;
	286	}
	287
322eb866 CB	288	static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev,
	289	unsigned int old_sel,
	290	unsigned int new_sel)
	291	{
	292	static const u8 us_ramp[] = { 8, 16, 24, 32 };
	293	int id = rdev_get_id(rdev);
	294	unsigned int uV_delta, val;
	295	int ret;
	296
	297	ret = regmap_read(rdev->regmap, MCP16502_REG_BASE(id, CFG), &val);
	298	if (ret)
	299	return ret;
	300
	301	val = (val & MCP16502_DVSR) >> 2;
	302	uV_delta = abs(new_sel * rdev->desc->linear_ranges->step -
	303	old_sel * rdev->desc->linear_ranges->step);
	304	switch (id) {
	305	case BUCK1:
	306	case LDO1:
	307	case LDO2:
	308	ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
	309	mcp16502_ramp_b1l12[val]);
	310	break;
	311
	312	case BUCK2:
	313	case BUCK3:
	314	case BUCK4:
	315	ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
	316	mcp16502_ramp_b234[val]);
	317	break;
	318
	319	default:
	320	return -EINVAL;
	321	}
	322
	323	return ret;
	324	}
	325
919261c0 AS	326	#ifdef CONFIG_SUSPEND
	327	/*
	328	* mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
	329	* mode
	330	*/
	331	static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev)
	332	{
	333	switch (pm_suspend_target_state) {
	334	case PM_SUSPEND_STANDBY:
3e5532a0	335	return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_LPM);
919261c0 AS	336	case PM_SUSPEND_ON:
919261c0 AS	337	case PM_SUSPEND_MEM:
3e5532a0	338	return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_HIB);
919261c0 AS	339	default:
	340	dev_err(&rdev->dev, "invalid suspend target: %d\n",
	341	pm_suspend_target_state);
	342	}
	343
	344	return -EINVAL;
	345	}
	346
	347	/*
	348	* mcp16502_set_suspend_voltage() - regulator_ops set_suspend_voltage
	349	*/
	350	static int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV)
	351	{
919261c0 AS	352	int sel = regulator_map_voltage_linear_range(rdev, uV, uV);
	353	int reg = mcp16502_suspend_get_target_reg(rdev);
	354
	355	if (sel < 0)
	356	return sel;
	357
	358	if (reg < 0)
	359	return reg;
	360
4cf46953	361	return regmap_update_bits(rdev->regmap, reg, MCP16502_VSEL, sel);
919261c0 AS	362	}
	363
	364	/*
	365	* mcp16502_set_suspend_mode() - regulator_ops set_suspend_mode
	366	*/
	367	static int mcp16502_set_suspend_mode(struct regulator_dev *rdev,
	368	unsigned int mode)
	369	{
	370	switch (pm_suspend_target_state) {
	371	case PM_SUSPEND_STANDBY:
	372	return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_LPM);
	373	case PM_SUSPEND_ON:
	374	case PM_SUSPEND_MEM:
	375	return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_HIB);
	376	default:
	377	dev_err(&rdev->dev, "invalid suspend target: %d\n",
	378	pm_suspend_target_state);
	379	}
	380
	381	return -EINVAL;
	382	}
	383
	384	/*
	385	* mcp16502_set_suspend_enable() - regulator_ops set_suspend_enable
	386	*/
	387	static int mcp16502_set_suspend_enable(struct regulator_dev *rdev)
	388	{
919261c0 AS	389	int reg = mcp16502_suspend_get_target_reg(rdev);
	390
	391	if (reg < 0)
	392	return reg;
	393
4cf46953	394	return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, MCP16502_EN);
919261c0 AS	395	}
	396
	397	/*
	398	* mcp16502_set_suspend_disable() - regulator_ops set_suspend_disable
	399	*/
	400	static int mcp16502_set_suspend_disable(struct regulator_dev *rdev)
	401	{
919261c0 AS	402	int reg = mcp16502_suspend_get_target_reg(rdev);
	403
	404	if (reg < 0)
	405	return reg;
	406
4cf46953	407	return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, 0);
919261c0 AS	408	}
	409	#endif /* CONFIG_SUSPEND */
	410
	411	static const struct regulator_ops mcp16502_buck_ops = {
	412	.list_voltage = regulator_list_voltage_linear_range,
	413	.map_voltage = regulator_map_voltage_linear_range,
	414	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	415	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	416	.enable = regulator_enable_regmap,
	417	.disable = regulator_disable_regmap,
	418	.is_enabled = regulator_is_enabled_regmap,
	419	.get_status = mcp16502_get_status,
322eb866	420	.set_voltage_time_sel = mcp16502_set_voltage_time_sel,
96ec5afe	421	.set_ramp_delay = regulator_set_ramp_delay_regmap,
919261c0 AS	422
	423	.set_mode = mcp16502_set_mode,
	424	.get_mode = mcp16502_get_mode,
	425
	426	#ifdef CONFIG_SUSPEND
	427	.set_suspend_voltage = mcp16502_set_suspend_voltage,
	428	.set_suspend_mode = mcp16502_set_suspend_mode,
	429	.set_suspend_enable = mcp16502_set_suspend_enable,
	430	.set_suspend_disable = mcp16502_set_suspend_disable,
	431	#endif /* CONFIG_SUSPEND */
	432	};
	433
	434	/*
	435	* LDOs cannot change operating modes.
	436	*/
	437	static const struct regulator_ops mcp16502_ldo_ops = {
	438	.list_voltage = regulator_list_voltage_linear_range,
	439	.map_voltage = regulator_map_voltage_linear_range,
	440	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	441	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	442	.enable = regulator_enable_regmap,
	443	.disable = regulator_disable_regmap,
	444	.is_enabled = regulator_is_enabled_regmap,
	445	.get_status = mcp16502_get_status,
322eb866	446	.set_voltage_time_sel = mcp16502_set_voltage_time_sel,
96ec5afe	447	.set_ramp_delay = regulator_set_ramp_delay_regmap,
919261c0 AS	448
	449	#ifdef CONFIG_SUSPEND
	450	.set_suspend_voltage = mcp16502_set_suspend_voltage,
	451	.set_suspend_enable = mcp16502_set_suspend_enable,
	452	.set_suspend_disable = mcp16502_set_suspend_disable,
	453	#endif /* CONFIG_SUSPEND */
	454	};
	455
	456	static const struct of_device_id mcp16502_ids[] = {
	457	{ .compatible = "microchip,mcp16502", },
	458	{}
	459	};
	460	MODULE_DEVICE_TABLE(of, mcp16502_ids);
	461
60ab7f41	462	static const struct linear_range b1l12_ranges[] = {
919261c0 AS	463	REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
	464	};
	465
60ab7f41	466	static const struct linear_range b234_ranges[] = {
919261c0 AS	467	REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
	468	};
	469
	470	static const struct regulator_desc mcp16502_desc[] = {
96ec5afe AL	471	/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops, ramp_table) */
	472	MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops,
	473	mcp16502_ramp_b1l12),
	474	MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops,
	475	mcp16502_ramp_b234),
	476	MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops,
	477	mcp16502_ramp_b234),
	478	MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops,
	479	mcp16502_ramp_b234),
	480	MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops,
	481	mcp16502_ramp_b1l12),
	482	MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops,
	483	mcp16502_ramp_b1l12)
919261c0 AS	484	};
	485
	486	static const struct regmap_range mcp16502_ranges[] = {
	487	regmap_reg_range(MCP16502_MIN_REG, MCP16502_MAX_REG)
	488	};
	489
	490	static const struct regmap_access_table mcp16502_yes_reg_table = {
	491	.yes_ranges = mcp16502_ranges,
	492	.n_yes_ranges = ARRAY_SIZE(mcp16502_ranges),
	493	};
	494
	495	static const struct regmap_config mcp16502_regmap_config = {
	496	.reg_bits = 8,
	497	.val_bits = 8,
	498	.max_register = MCP16502_MAX_REG,
	499	.cache_type = REGCACHE_NONE,
	500	.rd_table = &mcp16502_yes_reg_table,
	501	.wr_table = &mcp16502_yes_reg_table,
	502	};
	503
1d15b3e6	504	static int mcp16502_probe(struct i2c_client *client)
919261c0 AS	505	{
919261c0 AS	506	struct regulator_config config = { };
784c24c3	507	struct regulator_dev *rdev;
919261c0 AS	508	struct device *dev;
919261c0 AS	509	struct mcp16502 *mcp;
4cf46953	510	struct regmap *rmap;
784c24c3	511	int i, ret;
919261c0 AS	512
	513	dev = &client->dev;
	514	config.dev = dev;
	515
	516	mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
	517	if (!mcp)
	518	return -ENOMEM;
	519
4cf46953 AL	520	rmap = devm_regmap_init_i2c(client, &mcp16502_regmap_config);
	521	if (IS_ERR(rmap)) {
	522	ret = PTR_ERR(rmap);
919261c0 AS	523	dev_err(dev, "regmap init failed: %d\n", ret);
	524	return ret;
	525	}
	526
	527	i2c_set_clientdata(client, mcp);
4cf46953	528	config.regmap = rmap;
919261c0 AS	529	config.driver_data = mcp;
919261c0 AS	530
3c42728c	531	mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW);
919261c0 AS	532	if (IS_ERR(mcp->lpm)) {
	533	dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
	534	return PTR_ERR(mcp->lpm);
	535	}
	536
784c24c3 AL	537	for (i = 0; i < NUM_REGULATORS; i++) {
	538	rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
	539	if (IS_ERR(rdev)) {
	540	dev_err(dev,
	541	"failed to register %s regulator %ld\n",
	542	mcp16502_desc[i].name, PTR_ERR(rdev));
	543	return PTR_ERR(rdev);
	544	}
	545	}
919261c0 AS	546
	547	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
	548
	549	return 0;
	550	}
	551
4906d091	552	#ifdef CONFIG_PM_SLEEP
fc401cb9 AS	553	static int mcp16502_suspend_noirq(struct device *dev)
	554	{
	555	struct i2c_client *client = to_i2c_client(dev);
	556	struct mcp16502 *mcp = i2c_get_clientdata(client);
	557
	558	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM);
	559
	560	return 0;
	561	}
	562
	563	static int mcp16502_resume_noirq(struct device *dev)
	564	{
	565	struct i2c_client *client = to_i2c_client(dev);
	566	struct mcp16502 *mcp = i2c_get_clientdata(client);
	567
	568	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
	569
	570	return 0;
	571	}
4906d091	572	#endif
fc401cb9 AS	573
	574	#ifdef CONFIG_PM
	575	static const struct dev_pm_ops mcp16502_pm_ops = {
	576	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,
308144ce	577	mcp16502_resume_noirq)
fc401cb9 AS	578	};
fc401cb9 AS	579	#endif
919261c0 AS	580	static const struct i2c_device_id mcp16502_i2c_id[] = {
	581	{ "mcp16502", 0 },
	582	{ }
	583	};
	584	MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);
	585
	586	static struct i2c_driver mcp16502_drv = {
964e1865	587	.probe = mcp16502_probe,
919261c0 AS	588	.driver = {
919261c0 AS	589	.name = "mcp16502-regulator",
d3b81d97	590	.probe_type = PROBE_PREFER_ASYNCHRONOUS,
919261c0	591	.of_match_table = of_match_ptr(mcp16502_ids),
fc401cb9 AS	592	#ifdef CONFIG_PM
	593	.pm = &mcp16502_pm_ops,
	594	#endif
919261c0 AS	595	},
	596	.id_table = mcp16502_i2c_id,
	597	};
	598
	599	module_i2c_driver(mcp16502_drv);
	600
919261c0 AS	601	MODULE_LICENSE("GPL v2");
	602	MODULE_DESCRIPTION("MCP16502 PMIC driver");
	603	MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");