[linux-2.6-block.git] / drivers / regulator / max8952.c

/*
 * max8952.c - Voltage and current regulation for the Maxim 8952
 *
 * Copyright (C) 2010 Samsung Electronics
 * MyungJoo Ham <myungjoo.ham@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/max8952.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>

/* Registers */
enum {
	MAX8952_REG_MODE0,
	MAX8952_REG_MODE1,
	MAX8952_REG_MODE2,
	MAX8952_REG_MODE3,
	MAX8952_REG_CONTROL,
	MAX8952_REG_SYNC,
	MAX8952_REG_RAMP,
	MAX8952_REG_CHIP_ID1,
	MAX8952_REG_CHIP_ID2,
};

struct max8952_data {
	struct i2c_client	*client;
	struct max8952_platform_data *pdata;

	bool vid0;
	bool vid1;
};

static int max8952_read_reg(struct max8952_data *max8952, u8 reg)
{
	int ret = i2c_smbus_read_byte_data(max8952->client, reg);

	if (ret > 0)
		ret &= 0xff;

	return ret;
}

static int max8952_write_reg(struct max8952_data *max8952,
		u8 reg, u8 value)
{
	return i2c_smbus_write_byte_data(max8952->client, reg, value);
}

static int max8952_list_voltage(struct regulator_dev *rdev,
		unsigned int selector)
{
	struct max8952_data *max8952 = rdev_get_drvdata(rdev);

	if (rdev_get_id(rdev) != 0)
		return -EINVAL;

	return (max8952->pdata->dvs_mode[selector] * 10 + 770) * 1000;
}

static int max8952_get_voltage_sel(struct regulator_dev *rdev)
{
	struct max8952_data *max8952 = rdev_get_drvdata(rdev);
	u8 vid = 0;

	if (max8952->vid0)
		vid += 1;
	if (max8952->vid1)
		vid += 2;

	return vid;
}

static int max8952_set_voltage_sel(struct regulator_dev *rdev,
				   unsigned selector)
{
	struct max8952_data *max8952 = rdev_get_drvdata(rdev);

	if (!gpio_is_valid(max8952->pdata->gpio_vid0) ||
			!gpio_is_valid(max8952->pdata->gpio_vid1)) {
		/* DVS not supported */
		return -EPERM;
	}

	max8952->vid0 = selector & 0x1;
	max8952->vid1 = (selector >> 1) & 0x1;
	gpio_set_value(max8952->pdata->gpio_vid0, max8952->vid0);
	gpio_set_value(max8952->pdata->gpio_vid1, max8952->vid1);

	return 0;
}

static struct regulator_ops max8952_ops = {
	.list_voltage		= max8952_list_voltage,
	.get_voltage_sel	= max8952_get_voltage_sel,
	.set_voltage_sel	= max8952_set_voltage_sel,
};

static const struct regulator_desc regulator = {
	.name		= "MAX8952_VOUT",
	.id		= 0,
	.n_voltages	= MAX8952_NUM_DVS_MODE,
	.ops		= &max8952_ops,
	.type		= REGULATOR_VOLTAGE,
	.owner		= THIS_MODULE,
};

#ifdef CONFIG_OF
static const struct of_device_id max8952_dt_match[] = {
	{ .compatible = "maxim,max8952" },
	{},
};
MODULE_DEVICE_TABLE(of, max8952_dt_match);

static struct max8952_platform_data *max8952_parse_dt(struct device *dev)
{
	struct max8952_platform_data *pd;
	struct device_node *np = dev->of_node;
	int ret;
	int i;

	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
	if (!pd)
		return NULL;

	pd->gpio_vid0 = of_get_named_gpio(np, "max8952,vid-gpios", 0);
	pd->gpio_vid1 = of_get_named_gpio(np, "max8952,vid-gpios", 1);
	pd->gpio_en = of_get_named_gpio(np, "max8952,en-gpio", 0);

	if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode))
		dev_warn(dev, "Default mode not specified, assuming 0\n");

	ret = of_property_read_u32_array(np, "max8952,dvs-mode-microvolt",
					pd->dvs_mode, ARRAY_SIZE(pd->dvs_mode));
	if (ret) {
		dev_err(dev, "max8952,dvs-mode-microvolt property not specified");
		return NULL;
	}

	for (i = 0; i < ARRAY_SIZE(pd->dvs_mode); ++i) {
		if (pd->dvs_mode[i] < 770000 || pd->dvs_mode[i] > 1400000) {
			dev_err(dev, "DVS voltage %d out of range\n", i);
			return NULL;
		}
		pd->dvs_mode[i] = (pd->dvs_mode[i] - 770000) / 10000;
	}

	if (of_property_read_u32(np, "max8952,sync-freq", &pd->sync_freq))
		dev_warn(dev, "max8952,sync-freq property not specified, defaulting to 26MHz\n");

	if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed))
		dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n");

	pd->reg_data = of_get_regulator_init_data(dev, np);
	if (!pd->reg_data) {
		dev_err(dev, "Failed to parse regulator init data\n");
		return NULL;
	}

	return pd;
}
#else
static struct max8952_platform_data *max8952_parse_dt(struct device *dev)
{
	return NULL;
}
#endif

static int max8952_pmic_probe(struct i2c_client *client,
		const struct i2c_device_id *i2c_id)
{
	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
	struct max8952_platform_data *pdata = dev_get_platdata(&client->dev);
	struct regulator_config config = { };
	struct max8952_data *max8952;
	struct regulator_dev *rdev;

	int ret = 0, err = 0;

	if (client->dev.of_node)
		pdata = max8952_parse_dt(&client->dev);

	if (!pdata) {
		dev_err(&client->dev, "Require the platform data\n");
		return -EINVAL;
	}

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
		return -EIO;

	max8952 = devm_kzalloc(&client->dev, sizeof(struct max8952_data),
			       GFP_KERNEL);
	if (!max8952)
		return -ENOMEM;

	max8952->client = client;
	max8952->pdata = pdata;

	config.dev = &client->dev;
	config.init_data = pdata->reg_data;
	config.driver_data = max8952;
	config.of_node = client->dev.of_node;

	config.ena_gpio = pdata->gpio_en;
	if (pdata->reg_data->constraints.boot_on)
		config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;

	rdev = devm_regulator_register(&client->dev, &regulator, &config);
	if (IS_ERR(rdev)) {
		ret = PTR_ERR(rdev);
		dev_err(&client->dev, "regulator init failed (%d)\n", ret);
		return ret;
	}

	max8952->vid0 = pdata->default_mode & 0x1;
	max8952->vid1 = (pdata->default_mode >> 1) & 0x1;

	if (gpio_is_valid(pdata->gpio_vid0) &&
			gpio_is_valid(pdata->gpio_vid1)) {
		unsigned long gpio_flags;

		gpio_flags = max8952->vid0 ?
			     GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
		if (devm_gpio_request_one(&client->dev, pdata->gpio_vid0,
					  gpio_flags, "MAX8952 VID0"))
			err = 1;

		gpio_flags = max8952->vid1 ?
			     GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
		if (devm_gpio_request_one(&client->dev, pdata->gpio_vid1,
					  gpio_flags, "MAX8952 VID1"))
			err = 2;
	} else
		err = 3;

	if (err) {
		dev_warn(&client->dev, "VID0/1 gpio invalid: "
				"DVS not available.\n");
		max8952->vid0 = 0;
		max8952->vid1 = 0;
		/* Mark invalid */
		pdata->gpio_vid0 = -1;
		pdata->gpio_vid1 = -1;

		/* Disable Pulldown of EN only */
		max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60);

		dev_err(&client->dev, "DVS modes disabled because VID0 and VID1"
				" do not have proper controls.\n");
	} else {
		/*
		 * Disable Pulldown on EN, VID0, VID1 to reduce
		 * leakage current of MAX8952 assuming that MAX8952
		 * is turned on (EN==1). Note that without having VID0/1
		 * properly connected, turning pulldown off can be
		 * problematic. Thus, turn this off only when they are
		 * controllable by GPIO.
		 */
		max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x0);
	}

	max8952_write_reg(max8952, MAX8952_REG_MODE0,
			(max8952_read_reg(max8952,
					  MAX8952_REG_MODE0) & 0xC0) |
			(pdata->dvs_mode[0] & 0x3F));
	max8952_write_reg(max8952, MAX8952_REG_MODE1,
			(max8952_read_reg(max8952,
					  MAX8952_REG_MODE1) & 0xC0) |
			(pdata->dvs_mode[1] & 0x3F));
	max8952_write_reg(max8952, MAX8952_REG_MODE2,
			(max8952_read_reg(max8952,
					  MAX8952_REG_MODE2) & 0xC0) |
			(pdata->dvs_mode[2] & 0x3F));
	max8952_write_reg(max8952, MAX8952_REG_MODE3,
			(max8952_read_reg(max8952,
					  MAX8952_REG_MODE3) & 0xC0) |
			(pdata->dvs_mode[3] & 0x3F));

	max8952_write_reg(max8952, MAX8952_REG_SYNC,
			(max8952_read_reg(max8952, MAX8952_REG_SYNC) & 0x3F) |
			((pdata->sync_freq & 0x3) << 6));
	max8952_write_reg(max8952, MAX8952_REG_RAMP,
			(max8952_read_reg(max8952, MAX8952_REG_RAMP) & 0x1F) |
			((pdata->ramp_speed & 0x7) << 5));

	i2c_set_clientdata(client, max8952);

	return 0;
}

static const struct i2c_device_id max8952_ids[] = {
	{ "max8952", 0 },
	{ },
};
MODULE_DEVICE_TABLE(i2c, max8952_ids);

static struct i2c_driver max8952_pmic_driver = {
	.probe		= max8952_pmic_probe,
	.driver		= {
		.name	= "max8952",
		.of_match_table = of_match_ptr(max8952_dt_match),
	},
	.id_table	= max8952_ids,
};

static int __init max8952_pmic_init(void)
{
	return i2c_add_driver(&max8952_pmic_driver);
}
subsys_initcall(max8952_pmic_init);

static void __exit max8952_pmic_exit(void)
{
	i2c_del_driver(&max8952_pmic_driver);
}
module_exit(max8952_pmic_exit);

MODULE_DESCRIPTION("MAXIM 8952 voltage regulator driver");
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_LICENSE("GPL");
Commit	Line	Data
202f4f53 MH	1	/*
	2	* max8952.c - Voltage and current regulation for the Maxim 8952
	3	*
	4	* Copyright (C) 2010 Samsung Electronics
	5	* MyungJoo Ham <myungjoo.ham@samsung.com>
	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License as published by
	9	* the Free Software Foundation; either version 2 of the License, or
	10	* (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	20	*/
	21
	22	#include <linux/module.h>
	23	#include <linux/init.h>
	24	#include <linux/i2c.h>
	25	#include <linux/err.h>
	26	#include <linux/platform_device.h>
	27	#include <linux/regulator/driver.h>
	28	#include <linux/regulator/max8952.h>
202f4f53 MH	29	#include <linux/gpio.h>
202f4f53 MH	30	#include <linux/io.h>
3ff4aa95 TF	31	#include <linux/of.h>
	32	#include <linux/of_gpio.h>
	33	#include <linux/regulator/of_regulator.h>
202f4f53 MH	34	#include <linux/slab.h>
	35
	36	/* Registers */
	37	enum {
	38	MAX8952_REG_MODE0,
	39	MAX8952_REG_MODE1,
	40	MAX8952_REG_MODE2,
	41	MAX8952_REG_MODE3,
	42	MAX8952_REG_CONTROL,
	43	MAX8952_REG_SYNC,
	44	MAX8952_REG_RAMP,
	45	MAX8952_REG_CHIP_ID1,
	46	MAX8952_REG_CHIP_ID2,
	47	};
	48
	49	struct max8952_data {
	50	struct i2c_client *client;
202f4f53	51	struct max8952_platform_data *pdata;
202f4f53 MH	52
	53	bool vid0;
	54	bool vid1;
202f4f53 MH	55	};
	56
	57	static int max8952_read_reg(struct max8952_data *max8952, u8 reg)
	58	{
	59	int ret = i2c_smbus_read_byte_data(max8952->client, reg);
a5f8f963	60
202f4f53 MH	61	if (ret > 0)
	62	ret &= 0xff;
	63
	64	return ret;
	65	}
	66
	67	static int max8952_write_reg(struct max8952_data *max8952,
	68	u8 reg, u8 value)
	69	{
	70	return i2c_smbus_write_byte_data(max8952->client, reg, value);
	71	}
	72
202f4f53 MH	73	static int max8952_list_voltage(struct regulator_dev *rdev,
	74	unsigned int selector)
	75	{
	76	struct max8952_data *max8952 = rdev_get_drvdata(rdev);
	77
	78	if (rdev_get_id(rdev) != 0)
	79	return -EINVAL;
	80
b9b49af5	81	return (max8952->pdata->dvs_mode[selector] * 10 + 770) * 1000;
202f4f53 MH	82	}
202f4f53 MH	83
b9b49af5	84	static int max8952_get_voltage_sel(struct regulator_dev *rdev)
202f4f53 MH	85	{
	86	struct max8952_data *max8952 = rdev_get_drvdata(rdev);
	87	u8 vid = 0;
	88
	89	if (max8952->vid0)
	90	vid += 1;
	91	if (max8952->vid1)
	92	vid += 2;
	93
b9b49af5	94	return vid;
202f4f53 MH	95	}
202f4f53 MH	96
6ea67d04 AL	97	static int max8952_set_voltage_sel(struct regulator_dev *rdev,
6ea67d04 AL	98	unsigned selector)
202f4f53 MH	99	{
202f4f53 MH	100	struct max8952_data *max8952 = rdev_get_drvdata(rdev);
202f4f53 MH	101
202f4f53 MH	102	if (!gpio_is_valid(max8952->pdata->gpio_vid0) \|\|
e2cf3137	103	!gpio_is_valid(max8952->pdata->gpio_vid1)) {
202f4f53 MH	104	/* DVS not supported */
	105	return -EPERM;
	106	}
	107
6ea67d04 AL	108	max8952->vid0 = selector & 0x1;
	109	max8952->vid1 = (selector >> 1) & 0x1;
	110	gpio_set_value(max8952->pdata->gpio_vid0, max8952->vid0);
	111	gpio_set_value(max8952->pdata->gpio_vid1, max8952->vid1);
202f4f53 MH	112
	113	return 0;
	114	}
	115
	116	static struct regulator_ops max8952_ops = {
	117	.list_voltage = max8952_list_voltage,
b9b49af5	118	.get_voltage_sel = max8952_get_voltage_sel,
6ea67d04	119	.set_voltage_sel = max8952_set_voltage_sel,
202f4f53 MH	120	};
202f4f53 MH	121
bd6ff0d6	122	static const struct regulator_desc regulator = {
202f4f53 MH	123	.name = "MAX8952_VOUT",
	124	.id = 0,
	125	.n_voltages = MAX8952_NUM_DVS_MODE,
	126	.ops = &max8952_ops,
	127	.type = REGULATOR_VOLTAGE,
	128	.owner = THIS_MODULE,
	129	};
	130
3ff4aa95	131	#ifdef CONFIG_OF
cfe6e333	132	static const struct of_device_id max8952_dt_match[] = {
3ff4aa95 TF	133	{ .compatible = "maxim,max8952" },
	134	{},
	135	};
	136	MODULE_DEVICE_TABLE(of, max8952_dt_match);
	137
	138	static struct max8952_platform_data max8952_parse_dt(struct device dev)
	139	{
	140	struct max8952_platform_data *pd;
	141	struct device_node *np = dev->of_node;
	142	int ret;
	143	int i;
	144
	145	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
7752d964	146	if (!pd)
3ff4aa95	147	return NULL;
3ff4aa95 TF	148
	149	pd->gpio_vid0 = of_get_named_gpio(np, "max8952,vid-gpios", 0);
	150	pd->gpio_vid1 = of_get_named_gpio(np, "max8952,vid-gpios", 1);
	151	pd->gpio_en = of_get_named_gpio(np, "max8952,en-gpio", 0);
	152
	153	if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode))
	154	dev_warn(dev, "Default mode not specified, assuming 0\n");
	155
	156	ret = of_property_read_u32_array(np, "max8952,dvs-mode-microvolt",
	157	pd->dvs_mode, ARRAY_SIZE(pd->dvs_mode));
	158	if (ret) {
	159	dev_err(dev, "max8952,dvs-mode-microvolt property not specified");
	160	return NULL;
	161	}
	162
	163	for (i = 0; i < ARRAY_SIZE(pd->dvs_mode); ++i) {
	164	if (pd->dvs_mode[i] < 770000 \|\| pd->dvs_mode[i] > 1400000) {
	165	dev_err(dev, "DVS voltage %d out of range\n", i);
	166	return NULL;
	167	}
	168	pd->dvs_mode[i] = (pd->dvs_mode[i] - 770000) / 10000;
	169	}
	170
	171	if (of_property_read_u32(np, "max8952,sync-freq", &pd->sync_freq))
	172	dev_warn(dev, "max8952,sync-freq property not specified, defaulting to 26MHz\n");
	173
	174	if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed))
	175	dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n");
	176
	177	pd->reg_data = of_get_regulator_init_data(dev, np);
	178	if (!pd->reg_data) {
	179	dev_err(dev, "Failed to parse regulator init data\n");
	180	return NULL;
	181	}
	182
	183	return pd;
	184	}
	185	#else
	186	static struct max8952_platform_data max8952_parse_dt(struct device dev)
	187	{
	188	return NULL;
	189	}
	190	#endif
	191
a5023574	192	static int max8952_pmic_probe(struct i2c_client *client,
202f4f53 MH	193	const struct i2c_device_id *i2c_id)
	194	{
	195	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
dff91d0b	196	struct max8952_platform_data *pdata = dev_get_platdata(&client->dev);
c172708d	197	struct regulator_config config = { };
202f4f53	198	struct max8952_data *max8952;
b874f41c	199	struct regulator_dev *rdev;
202f4f53 MH	200
	201	int ret = 0, err = 0;
	202
3ff4aa95 TF	203	if (client->dev.of_node)
	204	pdata = max8952_parse_dt(&client->dev);
	205
202f4f53 MH	206	if (!pdata) {
	207	dev_err(&client->dev, "Require the platform data\n");
	208	return -EINVAL;
	209	}
	210
	211	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
	212	return -EIO;
	213
372de4aa AL	214	max8952 = devm_kzalloc(&client->dev, sizeof(struct max8952_data),
372de4aa AL	215	GFP_KERNEL);
202f4f53 MH	216	if (!max8952)
	217	return -ENOMEM;
	218
	219	max8952->client = client;
202f4f53	220	max8952->pdata = pdata;
202f4f53	221
b874f41c	222	config.dev = &client->dev;
3ec6eb9c	223	config.init_data = pdata->reg_data;
c172708d	224	config.driver_data = max8952;
71622e15	225	config.of_node = client->dev.of_node;
c172708d	226
b669e0ad	227	config.ena_gpio = pdata->gpio_en;
3ec6eb9c	228	if (pdata->reg_data->constraints.boot_on)
b669e0ad AL	229	config.ena_gpio_flags \|= GPIOF_OUT_INIT_HIGH;
b669e0ad AL	230
b874f41c	231	rdev = devm_regulator_register(&client->dev, &regulator, &config);
b874f41c KK	232	if (IS_ERR(rdev)) {
	233	ret = PTR_ERR(rdev);
	234	dev_err(&client->dev, "regulator init failed (%d)\n", ret);
372de4aa	235	return ret;
da05738e	236	}
202f4f53	237
c8237f01 AL	238	max8952->vid0 = pdata->default_mode & 0x1;
c8237f01 AL	239	max8952->vid1 = (pdata->default_mode >> 1) & 0x1;
202f4f53	240
202f4f53 MH	241	if (gpio_is_valid(pdata->gpio_vid0) &&
202f4f53 MH	242	gpio_is_valid(pdata->gpio_vid1)) {
d7da152c AL	243	unsigned long gpio_flags;
	244
	245	gpio_flags = max8952->vid0 ?
	246	GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
	247	if (devm_gpio_request_one(&client->dev, pdata->gpio_vid0,
	248	gpio_flags, "MAX8952 VID0"))
202f4f53 MH	249	err = 1;
202f4f53 MH	250
d7da152c AL	251	gpio_flags = max8952->vid1 ?
	252	GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
	253	if (devm_gpio_request_one(&client->dev, pdata->gpio_vid1,
	254	gpio_flags, "MAX8952 VID1"))
202f4f53	255	err = 2;
202f4f53 MH	256	} else
	257	err = 3;
	258
	259	if (err) {
b874f41c	260	dev_warn(&client->dev, "VID0/1 gpio invalid: "
25985edc	261	"DVS not available.\n");
202f4f53 MH	262	max8952->vid0 = 0;
	263	max8952->vid1 = 0;
	264	/* Mark invalid */
	265	pdata->gpio_vid0 = -1;
	266	pdata->gpio_vid1 = -1;
	267
	268	/* Disable Pulldown of EN only */
	269	max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60);
	270
b874f41c	271	dev_err(&client->dev, "DVS modes disabled because VID0 and VID1"
202f4f53 MH	272	" do not have proper controls.\n");
	273	} else {
	274	/*
	275	* Disable Pulldown on EN, VID0, VID1 to reduce
	276	* leakage current of MAX8952 assuming that MAX8952
	277	* is turned on (EN==1). Note that without having VID0/1
	278	* properly connected, turning pulldown off can be
	279	* problematic. Thus, turn this off only when they are
	280	* controllable by GPIO.
	281	*/
	282	max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x0);
	283	}
	284
	285	max8952_write_reg(max8952, MAX8952_REG_MODE0,
	286	(max8952_read_reg(max8952,
	287	MAX8952_REG_MODE0) & 0xC0) \|
	288	(pdata->dvs_mode[0] & 0x3F));
	289	max8952_write_reg(max8952, MAX8952_REG_MODE1,
	290	(max8952_read_reg(max8952,
	291	MAX8952_REG_MODE1) & 0xC0) \|
	292	(pdata->dvs_mode[1] & 0x3F));
	293	max8952_write_reg(max8952, MAX8952_REG_MODE2,
	294	(max8952_read_reg(max8952,
	295	MAX8952_REG_MODE2) & 0xC0) \|
	296	(pdata->dvs_mode[2] & 0x3F));
	297	max8952_write_reg(max8952, MAX8952_REG_MODE3,
	298	(max8952_read_reg(max8952,
	299	MAX8952_REG_MODE3) & 0xC0) \|
	300	(pdata->dvs_mode[3] & 0x3F));
	301
	302	max8952_write_reg(max8952, MAX8952_REG_SYNC,
	303	(max8952_read_reg(max8952, MAX8952_REG_SYNC) & 0x3F) \|
	304	((pdata->sync_freq & 0x3) << 6));
	305	max8952_write_reg(max8952, MAX8952_REG_RAMP,
	306	(max8952_read_reg(max8952, MAX8952_REG_RAMP) & 0x1F) \|
	307	((pdata->ramp_speed & 0x7) << 5));
	308
	309	i2c_set_clientdata(client, max8952);
	310
da05738e	311	return 0;
202f4f53 MH	312	}
202f4f53 MH	313
202f4f53 MH	314	static const struct i2c_device_id max8952_ids[] = {
	315	{ "max8952", 0 },
	316	{ },
	317	};
	318	MODULE_DEVICE_TABLE(i2c, max8952_ids);
	319
	320	static struct i2c_driver max8952_pmic_driver = {
	321	.probe = max8952_pmic_probe,
202f4f53 MH	322	.driver = {
202f4f53 MH	323	.name = "max8952",
3ff4aa95	324	.of_match_table = of_match_ptr(max8952_dt_match),
202f4f53 MH	325	},
	326	.id_table = max8952_ids,
	327	};
	328
	329	static int __init max8952_pmic_init(void)
	330	{
	331	return i2c_add_driver(&max8952_pmic_driver);
	332	}
	333	subsys_initcall(max8952_pmic_init);
	334
	335	static void __exit max8952_pmic_exit(void)
	336	{
	337	i2c_del_driver(&max8952_pmic_driver);
	338	}
	339	module_exit(max8952_pmic_exit);
	340
	341	MODULE_DESCRIPTION("MAXIM 8952 voltage regulator driver");
	342	MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
	343	MODULE_LICENSE("GPL");