[linux-block.git] / drivers / regulator / Kconfig

menuconfig REGULATOR
	bool "Voltage and Current Regulator Support"
	help
	  Generic Voltage and Current Regulator support.

	  This framework is designed to provide a generic interface to voltage
	  and current regulators within the Linux kernel. It's intended to
	  provide voltage and current control to client or consumer drivers and
	  also provide status information to user space applications through a
	  sysfs interface.

	  The intention is to allow systems to dynamically control regulator
	  output in order to save power and prolong battery life. This applies
	  to both voltage regulators (where voltage output is controllable) and
	  current sinks (where current output is controllable).

	  This framework safely compiles out if not selected so that client
	  drivers can still be used in systems with no software controllable
	  regulators.

	  If unsure, say no.

if REGULATOR

config REGULATOR_DEBUG
	bool "Regulator debug support"
	help
	  Say yes here to enable debugging support.

config REGULATOR_DUMMY
	bool "Provide a dummy regulator if regulator lookups fail"
	help
	  If this option is enabled then when a regulator lookup fails
	  and the board has not specified that it has provided full
	  constraints then the regulator core will provide an always
	  enabled dummy regulator will be provided, allowing consumer
	  drivers to continue.

	  A warning will be generated when this substitution is done.

config REGULATOR_FIXED_VOLTAGE
	tristate "Fixed voltage regulator support"
	help
	  This driver provides support for fixed voltage regulators,
	  useful for systems which use a combination of software
	  managed regulators and simple non-configurable regulators.

config REGULATOR_VIRTUAL_CONSUMER
	tristate "Virtual regulator consumer support"
	help
	  This driver provides a virtual consumer for the voltage and
          current regulator API which provides sysfs controls for
          configuring the supplies requested.  This is mainly useful
          for test purposes.

          If unsure, say no.

config REGULATOR_USERSPACE_CONSUMER
	tristate "Userspace regulator consumer support"
	help
	  There are some classes of devices that are controlled entirely
	  from user space. Userspace consumer driver provides ability to
	  control power supplies for such devices.

          If unsure, say no.

config REGULATOR_GPIO
	tristate "GPIO regulator support"
	depends on GENERIC_GPIO
	help
	  This driver provides support for regulators that can be
	  controlled via gpios.
	  It is capable of supporting current and voltage regulators
	  and the platform has to provide a mapping of GPIO-states
	  to target volts/amps.

config REGULATOR_AD5398
	tristate "Analog Devices AD5398/AD5821 regulators"
	depends on I2C
	help
	  This driver supports AD5398 and AD5821 current regulator chips.
	  If building into module, its name is ad5398.ko.

config REGULATOR_AAT2870
	tristate "AnalogicTech AAT2870 Regulators"
	depends on MFD_AAT2870_CORE
	help
	  If you have a AnalogicTech AAT2870 say Y to enable the
	  regulator driver.

config REGULATOR_DA903X
	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
	depends on PMIC_DA903X
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9030/DA9034 PMIC.

config REGULATOR_DA9052
	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
	depends on PMIC_DA9052
	help
	  This driver supports the voltage regulators of DA9052-BC and
	  DA9053-AA/Bx PMIC.

config REGULATOR_ANATOP
	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
	depends on MFD_ANATOP
	help
	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
	  regulators. It is recommended that this option be
	  enabled on i.MX6 platform.

config REGULATOR_MC13XXX_CORE
	tristate

config REGULATOR_MC13783
	tristate "Freescale MC13783 regulator driver"
	depends on MFD_MC13783
	select REGULATOR_MC13XXX_CORE
	help
	  Say y here to support the regulators found on the Freescale MC13783
	  PMIC.

config REGULATOR_MC13892
	tristate "Freescale MC13892 regulator driver"
	depends on MFD_MC13XXX
	select REGULATOR_MC13XXX_CORE
	help
	  Say y here to support the regulators found on the Freescale MC13892
	  PMIC.

config REGULATOR_ISL6271A
	tristate "Intersil ISL6271A Power regulator"
	depends on I2C
	help
	  This driver supports ISL6271A voltage regulator chip.

config REGULATOR_88PM8607
	bool "Marvell 88PM8607 Power regulators"
	depends on MFD_88PM860X=y
	help
	  This driver supports 88PM8607 voltage regulator chips.

config REGULATOR_MAX1586
	tristate "Maxim 1586/1587 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 1586 or 1587 voltage output
	  regulator via I2C bus. The provided regulator is suitable
	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.

config REGULATOR_MAX8649
	tristate "Maxim 8649 voltage regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver controls a Maxim 8649 voltage output regulator via
	  I2C bus.

config REGULATOR_MAX8660
	tristate "Maxim 8660/8661 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 8660/8661 voltage output
	  regulator via I2C bus.

config REGULATOR_MAX8925
	tristate "Maxim MAX8925 Power Management IC"
	depends on MFD_MAX8925
	help
	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.

config REGULATOR_MAX8952
	tristate "Maxim MAX8952 Power Management IC"
	depends on I2C
	help
	  This driver controls a Maxim 8952 voltage output regulator
	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	  modes ranging from 0.77V to 1.40V by 0.01V steps.

config REGULATOR_MAX8997
	tristate "Maxim 8997/8966 regulator"
	depends on MFD_MAX8997
	help
	  This driver controls a Maxim 8997/8966 regulator
	  via I2C bus. The provided regulator is suitable for S5PC110,
	  S5PV210, and Exynos-4 chips to control VCC_CORE and
	  VCC_USIM voltages.

config REGULATOR_MAX8998
	tristate "Maxim 8998 voltage regulator"
	depends on MFD_MAX8998
	help
	  This driver controls a Maxim 8998 voltage output regulator
	  via I2C bus. The provided regulator is suitable for S3C6410
	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.

config REGULATOR_PCAP
	tristate "Motorola PCAP2 regulator driver"
	depends on EZX_PCAP
	help
	 This driver provides support for the voltage regulators of the
	 PCAP2 PMIC.

config REGULATOR_LP3971
	tristate "National Semiconductors LP3971 PMIC regulator driver"
	depends on I2C
	help
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3971 PMIC

config REGULATOR_LP3972
	tristate "National Semiconductors LP3972 PMIC regulator driver"
	depends on I2C
	help
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3972 PMIC

config REGULATOR_PCF50633
	tristate "NXP PCF50633 regulator driver"
        depends on MFD_PCF50633
	help
	 Say Y here to support the voltage regulators and convertors
	 on PCF50633

config REGULATOR_RC5T583
	tristate "RICOH RC5T583 Power regulators"
	depends on MFD_RC5T583
	help
	  Select this option to enable the power regulator of RICOH
	  PMIC RC5T583.
	  This driver supports the control of different power rails of device
	  through regulator interface. The device supports multiple DCDC/LDO
	  outputs which can be controlled by i2c communication.

config REGULATOR_S5M8767
	tristate "Samsung S5M8767A voltage regulator"
	depends on MFD_S5M_CORE
	help
	 This driver supports a Samsung S5M8767A voltage output regulator
	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
	 supports DVS mode with 8bits of output voltage control.

config REGULATOR_AB3100
	tristate "ST-Ericsson AB3100 Regulator functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	 These regulators correspond to functionality in the
	 AB3100 analog baseband dealing with power regulators
	 for the system.

config REGULATOR_AB8500
	bool "ST-Ericsson AB8500 Power Regulators"
	depends on AB8500_CORE
	help
	  This driver supports the regulators found on the ST-Ericsson mixed
	  signal AB8500 PMIC

config REGULATOR_DBX500_PRCMU
	bool

config REGULATOR_DB8500_PRCMU
	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	depends on MFD_DB8500_PRCMU
	select REGULATOR_DBX500_PRCMU
	help
	  This driver supports the voltage domain regulators controlled by the
	  DB8500 PRCMU

config REGULATOR_TPS6105X
	tristate "TI TPS6105X Power regulators"
	depends on TPS6105X
	default y if TPS6105X
	help
	  This driver supports TPS61050/TPS61052 voltage regulator chips.
	  It is a single boost converter primarily for white LEDs and
	  audio amplifiers.

config REGULATOR_TPS62360
	tristate "TI TPS6236x Power Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS6236x voltage regulator chip. This
	  regulator is meant for processor core supply. This chip is
	  high-frequency synchronous step down dc-dc converter optimized
	  for battery-powered portable applications.

config REGULATOR_TPS65023
	tristate "TI TPS65023 Power regulators"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS6507X
	tristate "TI TPS6507X Power regulators"
	depends on I2C
	help
	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS65090
	tristate "TI TPS65090 Power regulator"
	depends on MFD_TPS65090
	help
	  This driver provides support for the voltage regulators on the
	  TI TPS65090 PMIC.

config REGULATOR_TPS65217
	tristate "TI TPS65217 Power regulators"
	depends on MFD_TPS65217
	help
	  This driver supports TPS65217 voltage regulator chips. TPS65217
	  provides three step-down converters and four general-purpose LDO
	  voltage regulators. It supports software based voltage control
	  for different voltage domains

config REGULATOR_TPS6524X
	tristate "TI TPS6524X Power regulators"
	depends on SPI
	help
	  This driver supports TPS6524X voltage regulator chips. TPS6524X
	  provides three step-down converters and two general-purpose LDO
	  voltage regulators.  This device is interfaced using a customized
	  serial interface currently supported on the sequencer serial
	  port controller.

config REGULATOR_TPS6586X
	tristate "TI TPS6586X Power regulators"
	depends on MFD_TPS6586X
	help
	  This driver supports TPS6586X voltage regulator chips.

config REGULATOR_TPS65910
	tristate "TI TPS65910/TPS65911 Power Regulators"
	depends on MFD_TPS65910
	help
	  This driver supports TPS65910/TPS65911 voltage regulator chips.

config REGULATOR_TPS65912
	tristate "TI TPS65912 Power regulator"
	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
	help
	    This driver supports TPS65912 voltage regulator chip.

config REGULATOR_TWL4030
	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
	depends on TWL4030_CORE
	help
	  This driver supports the voltage regulators provided by
	  this family of companion chips.

config REGULATOR_WM831X
	tristate "Wolfson Microelectronics WM831x PMIC regulators"
	depends on MFD_WM831X
	help
	  Support the voltage and current regulators of the WM831x series
	  of PMIC devices.

config REGULATOR_WM8350
	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	depends on MFD_WM8350
	help
	  This driver provides support for the voltage and current regulators
          of the WM8350 AudioPlus PMIC.

config REGULATOR_WM8400
	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	depends on MFD_WM8400
	help
	  This driver provides support for the voltage regulators of the
	  WM8400 AudioPlus PMIC.

config REGULATOR_WM8994
	tristate "Wolfson Microelectronics WM8994 CODEC"
	depends on MFD_WM8994
	help
	  This driver provides support for the voltage regulators on the
	  WM8994 CODEC.

endif
Commit	Line	Data
bbda14df	1	menuconfig REGULATOR
ba7e4763	2	bool "Voltage and Current Regulator Support"
ba7e4763 LG	3	help
	4	Generic Voltage and Current Regulator support.
	5
	6	This framework is designed to provide a generic interface to voltage
	7	and current regulators within the Linux kernel. It's intended to
	8	provide voltage and current control to client or consumer drivers and
	9	also provide status information to user space applications through a
	10	sysfs interface.
	11
	12	The intention is to allow systems to dynamically control regulator
	13	output in order to save power and prolong battery life. This applies
	14	to both voltage regulators (where voltage output is controllable) and
	15	current sinks (where current output is controllable).
	16
	17	This framework safely compiles out if not selected so that client
	18	drivers can still be used in systems with no software controllable
	19	regulators.
	20
	21	If unsure, say no.
	22
bbda14df TI	23	if REGULATOR
bbda14df TI	24
ba7e4763 LG	25	config REGULATOR_DEBUG
ba7e4763 LG	26	bool "Regulator debug support"
ba7e4763 LG	27	help
	28	Say yes here to enable debugging support.
	29
34abbd68 MB	30	config REGULATOR_DUMMY
	31	bool "Provide a dummy regulator if regulator lookups fail"
	32	help
	33	If this option is enabled then when a regulator lookup fails
	34	and the board has not specified that it has provided full
	35	constraints then the regulator core will provide an always
	36	enabled dummy regulator will be provided, allowing consumer
	37	drivers to continue.
	38
	39	A warning will be generated when this substitution is done.
	40
ba7e4763	41	config REGULATOR_FIXED_VOLTAGE
a9cb63b2	42	tristate "Fixed voltage regulator support"
a9cb63b2 MB	43	help
	44	This driver provides support for fixed voltage regulators,
	45	useful for systems which use a combination of software
	46	managed regulators and simple non-configurable regulators.
ba7e4763 LG	47
	48	config REGULATOR_VIRTUAL_CONSUMER
	49	tristate "Virtual regulator consumer support"
ba7e4763 LG	50	help
	51	This driver provides a virtual consumer for the voltage and
	52	current regulator API which provides sysfs controls for
	53	configuring the supplies requested. This is mainly useful
	54	for test purposes.
	55
	56	If unsure, say no.
	57
1d98cccf MR	58	config REGULATOR_USERSPACE_CONSUMER
1d98cccf MR	59	tristate "Userspace regulator consumer support"
1d98cccf MR	60	help
1d98cccf MR	61	There are some classes of devices that are controlled entirely
6f2653e6	62	from user space. Userspace consumer driver provides ability to
1d98cccf MR	63	control power supplies for such devices.
	64
	65	If unsure, say no.
	66
3f0292ae HS	67	config REGULATOR_GPIO
3f0292ae HS	68	tristate "GPIO regulator support"
d162b3c5	69	depends on GENERIC_GPIO
3f0292ae HS	70	help
	71	This driver provides support for regulators that can be
	72	controlled via gpios.
	73	It is capable of supporting current and voltage regulators
	74	and the platform has to provide a mapping of GPIO-states
	75	to target volts/amps.
	76
dfb9b8a4 AL	77	config REGULATOR_AD5398
	78	tristate "Analog Devices AD5398/AD5821 regulators"
	79	depends on I2C
0eb5d5ab	80	help
dfb9b8a4 AL	81	This driver supports AD5398 and AD5821 current regulator chips.
	82	If building into module, its name is ad5398.ko.
	83
	84	config REGULATOR_AAT2870
	85	tristate "AnalogicTech AAT2870 Regulators"
	86	depends on MFD_AAT2870_CORE
	87	help
	88	If you have a AnalogicTech AAT2870 say Y to enable the
	89	regulator driver.
	90
	91	config REGULATOR_DA903X
	92	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
	93	depends on PMIC_DA903X
	94	help
	95	Say y here to support the BUCKs and LDOs regulators found on
	96	Dialog Semiconductor DA9030/DA9034 PMIC.
	97
	98	config REGULATOR_DA9052
	99	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
	100	depends on PMIC_DA9052
	101	help
	102	This driver supports the voltage regulators of DA9052-BC and
	103	DA9053-AA/Bx PMIC.
	104
e3e5aff7 YCLP	105	config REGULATOR_ANATOP
	106	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
	107	depends on MFD_ANATOP
	108	help
	109	Say y here to support Freescale i.MX on-chip ANATOP LDOs
	110	regulators. It is recommended that this option be
	111	enabled on i.MX6 platform.
	112
dfb9b8a4 AL	113	config REGULATOR_MC13XXX_CORE
	114	tristate
	115
	116	config REGULATOR_MC13783
	117	tristate "Freescale MC13783 regulator driver"
	118	depends on MFD_MC13783
	119	select REGULATOR_MC13XXX_CORE
	120	help
	121	Say y here to support the regulators found on the Freescale MC13783
	122	PMIC.
	123
	124	config REGULATOR_MC13892
	125	tristate "Freescale MC13892 regulator driver"
	126	depends on MFD_MC13XXX
	127	select REGULATOR_MC13XXX_CORE
	128	help
	129	Say y here to support the regulators found on the Freescale MC13892
	130	PMIC.
	131
	132	config REGULATOR_ISL6271A
	133	tristate "Intersil ISL6271A Power regulator"
	134	depends on I2C
	135	help
	136	This driver supports ISL6271A voltage regulator chip.
	137
	138	config REGULATOR_88PM8607
	139	bool "Marvell 88PM8607 Power regulators"
	140	depends on MFD_88PM860X=y
	141	help
	142	This driver supports 88PM8607 voltage regulator chips.
0eb5d5ab	143
55f4fa4e RJ	144	config REGULATOR_MAX1586
	145	tristate "Maxim 1586/1587 voltage regulator"
	146	depends on I2C
55f4fa4e RJ	147	help
	148	This driver controls a Maxim 1586 or 1587 voltage output
	149	regulator via I2C bus. The provided regulator is suitable
	150	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
	151
a71b797f HZ	152	config REGULATOR_MAX8649
	153	tristate "Maxim 8649 voltage regulator"
	154	depends on I2C
c5b68d47	155	select REGMAP_I2C
a71b797f HZ	156	help
	157	This driver controls a Maxim 8649 voltage output regulator via
	158	I2C bus.
	159
27f37e4b WS	160	config REGULATOR_MAX8660
	161	tristate "Maxim 8660/8661 voltage regulator"
	162	depends on I2C
	163	help
	164	This driver controls a Maxim 8660/8661 voltage output
	165	regulator via I2C bus.
	166
08ff6f2a HZ	167	config REGULATOR_MAX8925
	168	tristate "Maxim MAX8925 Power Management IC"
	169	depends on MFD_MAX8925
	170	help
	171	Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
	172
202f4f53 MH	173	config REGULATOR_MAX8952
	174	tristate "Maxim MAX8952 Power Management IC"
	175	depends on I2C
	176	help
	177	This driver controls a Maxim 8952 voltage output regulator
	178	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	179	modes ranging from 0.77V to 1.40V by 0.01V steps.
	180
bd6ca2cf MH	181	config REGULATOR_MAX8997
	182	tristate "Maxim 8997/8966 regulator"
	183	depends on MFD_MAX8997
	184	help
	185	This driver controls a Maxim 8997/8966 regulator
	186	via I2C bus. The provided regulator is suitable for S5PC110,
	187	S5PV210, and Exynos-4 chips to control VCC_CORE and
	188	VCC_USIM voltages.
	189
156f2528 KP	190	config REGULATOR_MAX8998
156f2528 KP	191	tristate "Maxim 8998 voltage regulator"
69f71008	192	depends on MFD_MAX8998
156f2528 KP	193	help
	194	This driver controls a Maxim 8998 voltage output regulator
	195	via I2C bus. The provided regulator is suitable for S3C6410
	196	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
	197
dfb9b8a4 AL	198	config REGULATOR_PCAP
	199	tristate "Motorola PCAP2 regulator driver"
	200	depends on EZX_PCAP
5ec271e7	201	help
dfb9b8a4 AL	202	This driver provides support for the voltage regulators of the
dfb9b8a4 AL	203	PCAP2 PMIC.
5ec271e7	204
0cbdf7bc MS	205	config REGULATOR_LP3971
	206	tristate "National Semiconductors LP3971 PMIC regulator driver"
	207	depends on I2C
	208	help
	209	Say Y here to support the voltage regulators and convertors
	210	on National Semiconductors LP3971 PMIC
	211
5976f095 AL	212	config REGULATOR_LP3972
	213	tristate "National Semiconductors LP3972 PMIC regulator driver"
	214	depends on I2C
	215	help
	216	Say Y here to support the voltage regulators and convertors
	217	on National Semiconductors LP3972 PMIC
	218
dfb9b8a4 AL	219	config REGULATOR_PCF50633
	220	tristate "NXP PCF50633 regulator driver"
	221	depends on MFD_PCF50633
295c08bc	222	help
dfb9b8a4 AL	223	Say Y here to support the voltage regulators and convertors
dfb9b8a4 AL	224	on PCF50633
295c08bc	225
6ffc3270 LD	226	config REGULATOR_RC5T583
	227	tristate "RICOH RC5T583 Power regulators"
	228	depends on MFD_RC5T583
	229	help
	230	Select this option to enable the power regulator of RICOH
	231	PMIC RC5T583.
	232	This driver supports the control of different power rails of device
	233	through regulator interface. The device supports multiple DCDC/LDO
	234	outputs which can be controlled by i2c communication.
	235
dfb9b8a4 AL	236	config REGULATOR_S5M8767
	237	tristate "Samsung S5M8767A voltage regulator"
	238	depends on MFD_S5M_CORE
5e428d5c	239	help
dfb9b8a4 AL	240	This driver supports a Samsung S5M8767A voltage output regulator
	241	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
	242	supports DVS mode with 8bits of output voltage control.
5e428d5c	243
d619bc14 LW	244	config REGULATOR_AB3100
	245	tristate "ST-Ericsson AB3100 Regulator functions"
	246	depends on AB3100_CORE
	247	default y if AB3100_CORE
	248	help
	249	These regulators correspond to functionality in the
	250	AB3100 analog baseband dealing with power regulators
	251	for the system.
	252
dfb9b8a4 AL	253	config REGULATOR_AB8500
	254	bool "ST-Ericsson AB8500 Power Regulators"
	255	depends on AB8500_CORE
	256	help
	257	This driver supports the regulators found on the ST-Ericsson mixed
	258	signal AB8500 PMIC
	259
	260	config REGULATOR_DBX500_PRCMU
	261	bool
	262
	263	config REGULATOR_DB8500_PRCMU
	264	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	265	depends on MFD_DB8500_PRCMU
	266	select REGULATOR_DBX500_PRCMU
	267	help
	268	This driver supports the voltage domain regulators controlled by the
	269	DB8500 PRCMU
	270
2edd3b69 LW	271	config REGULATOR_TPS6105X
	272	tristate "TI TPS6105X Power regulators"
	273	depends on TPS6105X
	274	default y if TPS6105X
	275	help
	276	This driver supports TPS61050/TPS61052 voltage regulator chips.
	277	It is a single boost converter primarily for white LEDs and
	278	audio amplifiers.
	279
dfb9b8a4	280	config REGULATOR_TPS62360
d1cf4f65	281	tristate "TI TPS6236x Power Regulator"
dfb9b8a4 AL	282	depends on I2C
	283	select REGMAP_I2C
	284	help
d1cf4f65	285	This driver supports TPS6236x voltage regulator chip. This
dfb9b8a4 AL	286	regulator is meant for processor core supply. This chip is
	287	high-frequency synchronous step down dc-dc converter optimized
	288	for battery-powered portable applications.
	289
2de79850 AA	290	config REGULATOR_TPS65023
	291	tristate "TI TPS65023 Power regulators"
	292	depends on I2C
90923351	293	select REGMAP_I2C
2de79850 AA	294	help
	295	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	296	three step-down converters and two general-purpose LDO voltage regulators.
	297	It supports TI's software based Class-2 SmartReflex implementation.
	298
	299	config REGULATOR_TPS6507X
	300	tristate "TI TPS6507X Power regulators"
	301	depends on I2C
	302	help
	303	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	304	three step-down converters and two general-purpose LDO voltage regulators.
	305	It supports TI's software based Class-2 SmartReflex implementation.
	306
452534e5 VB	307	config REGULATOR_TPS65090
	308	tristate "TI TPS65090 Power regulator"
	309	depends on MFD_TPS65090
	310	help
	311	This driver provides support for the voltage regulators on the
	312	TI TPS65090 PMIC.
	313
a493077f AC	314	config REGULATOR_TPS65217
	315	tristate "TI TPS65217 Power regulators"
	316	depends on MFD_TPS65217
9260ad98	317	help
a493077f AC	318	This driver supports TPS65217 voltage regulator chips. TPS65217
	319	provides three step-down converters and four general-purpose LDO
	320	voltage regulators. It supports software based voltage control
	321	for different voltage domains
9260ad98	322
1394fd28 CC	323	config REGULATOR_TPS6524X
	324	tristate "TI TPS6524X Power regulators"
	325	depends on SPI
be0e2d3e	326	help
1394fd28 CC	327	This driver supports TPS6524X voltage regulator chips. TPS6524X
	328	provides three step-down converters and two general-purpose LDO
	329	voltage regulators. This device is interfaced using a customized
	330	serial interface currently supported on the sequencer serial
	331	port controller.
be0e2d3e	332
dfb9b8a4 AL	333	config REGULATOR_TPS6586X
	334	tristate "TI TPS6586X Power regulators"
	335	depends on MFD_TPS6586X
51bd6943	336	help
dfb9b8a4	337	This driver supports TPS6586X voltage regulator chips.
51bd6943	338
518fb721	339	config REGULATOR_TPS65910
ae0e6544	340	tristate "TI TPS65910/TPS65911 Power Regulators"
518fb721	341	depends on MFD_TPS65910
8b385d9b	342	help
ae0e6544	343	This driver supports TPS65910/TPS65911 voltage regulator chips.
c789ca20	344
dfb9b8a4 AL	345	config REGULATOR_TPS65912
	346	tristate "TI TPS65912 Power regulator"
	347	depends on (MFD_TPS65912_I2C \|\| MFD_TPS65912_SPI)
c789ca20	348	help
dfb9b8a4	349	This driver supports TPS65912 voltage regulator chip.
c789ca20	350
dfb9b8a4 AL	351	config REGULATOR_TWL4030
	352	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
	353	depends on TWL4030_CORE
1032fbfd	354	help
dfb9b8a4 AL	355	This driver supports the voltage regulators provided by
dfb9b8a4 AL	356	this family of companion chips.
1032fbfd	357
dfb9b8a4 AL	358	config REGULATOR_WM831X
	359	tristate "Wolfson Microelectronics WM831x PMIC regulators"
	360	depends on MFD_WM831X
49610235	361	help
dfb9b8a4 AL	362	Support the voltage and current regulators of the WM831x series
dfb9b8a4 AL	363	of PMIC devices.
49610235	364
dfb9b8a4 AL	365	config REGULATOR_WM8350
	366	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	367	depends on MFD_WM8350
1394fd28	368	help
dfb9b8a4 AL	369	This driver provides support for the voltage and current regulators
dfb9b8a4 AL	370	of the WM8350 AudioPlus PMIC.
1394fd28	371
dfb9b8a4 AL	372	config REGULATOR_WM8400
	373	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	374	depends on MFD_WM8400
518fb721	375	help
dfb9b8a4 AL	376	This driver provides support for the voltage regulators of the
dfb9b8a4 AL	377	WM8400 AudioPlus PMIC.
518fb721	378
dfb9b8a4 AL	379	config REGULATOR_WM8994
	380	tristate "Wolfson Microelectronics WM8994 CODEC"
	381	depends on MFD_WM8994
f7eb6c5e	382	help
dfb9b8a4 AL	383	This driver provides support for the voltage regulators on the
dfb9b8a4 AL	384	WM8994 CODEC.
f7eb6c5e	385
bbda14df	386	endif
295c08bc	387