[linux-2.6-block.git] / drivers / power / reset / Kconfig

menuconfig POWER_RESET
	bool "Board level reset or power off"
	help
	  Provides a number of drivers which either reset a complete board
	  or shut it down, by manipulating the main power supply on the board.

	  Say Y here to enable board reset and power off

config POWER_RESET_GPIO
	bool "GPIO power-off driver"
	depends on OF_GPIO && POWER_RESET
	help
	  This driver supports turning off your board via a GPIO line.
	  If your board needs a GPIO high/low to power down, say Y and
	  create a binding in your devicetree.

config POWER_RESET_MSM
	bool "Qualcomm MSM power-off driver"
	depends on POWER_RESET && ARCH_MSM
	help
	  Power off and restart support for Qualcomm boards.

config POWER_RESET_QNAP
	bool "QNAP power-off driver"
	depends on OF_GPIO && POWER_RESET && PLAT_ORION
	help
	  This driver supports turning off QNAP NAS devices by sending
	  commands to the microcontroller which controls the main power.

	  Say Y if you have a QNAP NAS.

config POWER_RESET_RESTART
	bool "Restart power-off driver"
	depends on ARM
	help
	  Some boards don't actually have the ability to power off.
	  Instead they restart, and u-boot holds the SoC until the
	  user presses a key. u-boot then boots into Linux.

config POWER_RESET_VEXPRESS
	bool "ARM Versatile Express power-off and reset driver"
	depends on ARM || ARM64
	depends on POWER_RESET
	help
	  Power off and reset support for the ARM Ltd. Versatile
	  Express boards.

config POWER_RESET_XGENE
	bool "APM SoC X-Gene reset driver"
	depends on ARM64
	depends on POWER_RESET
	help
	  Reboot support for the APM SoC X-Gene Eval boards.
Commit	Line	Data
96ff0f5c JL	1	menuconfig POWER_RESET
	2	bool "Board level reset or power off"
	3	help
	4	Provides a number of drivers which either reset a complete board
	5	or shut it down, by manipulating the main power supply on the board.
	6
	7	Say Y here to enable board reset and power off
	8
	9	config POWER_RESET_GPIO
	10	bool "GPIO power-off driver"
	11	depends on OF_GPIO && POWER_RESET
	12	help
	13	This driver supports turning off your board via a GPIO line.
	14	If your board needs a GPIO high/low to power down, say Y and
	15	create a binding in your devicetree.
e8fc721a	16
78be3176 AK	17	config POWER_RESET_MSM
	18	bool "Qualcomm MSM power-off driver"
	19	depends on POWER_RESET && ARCH_MSM
	20	help
	21	Power off and restart support for Qualcomm boards.
	22
e8fc721a AL	23	config POWER_RESET_QNAP
	24	bool "QNAP power-off driver"
	25	depends on OF_GPIO && POWER_RESET && PLAT_ORION
	26	help
	27	This driver supports turning off QNAP NAS devices by sending
	28	commands to the microcontroller which controls the main power.
	29
	30	Say Y if you have a QNAP NAS.
ffd8f9a7 AL	31
	32	config POWER_RESET_RESTART
	33	bool "Restart power-off driver"
	34	depends on ARM
	35	help
	36	Some boards don't actually have the ability to power off.
	37	Instead they restart, and u-boot holds the SoC until the
	38	user presses a key. u-boot then boots into Linux.
2655f51d CM	39
2655f51d CM	40	config POWER_RESET_VEXPRESS
b52eafcd PM	41	bool "ARM Versatile Express power-off and reset driver"
b52eafcd PM	42	depends on ARM \|\| ARM64
2655f51d CM	43	depends on POWER_RESET
	44	help
	45	Power off and reset support for the ARM Ltd. Versatile
	46	Express boards.
67778e0e LH	47
	48	config POWER_RESET_XGENE
	49	bool "APM SoC X-Gene reset driver"
	50	depends on ARM64
	51	depends on POWER_RESET
	52	help
	53	Reboot support for the APM SoC X-Gene Eval boards.