Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * This file contains work-arounds for many known PCI hardware | |
3 | * bugs. Devices present only on certain architectures (host | |
4 | * bridges et cetera) should be handled in arch-specific code. | |
5 | * | |
6 | * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. | |
7 | * | |
8 | * Copyright (c) 1999 Martin Mares <mj@ucw.cz> | |
9 | * | |
10 | * The bridge optimization stuff has been removed. If you really | |
11 | * have a silly BIOS which is unable to set your host bridge right, | |
12 | * use the PowerTweak utility (see http://powertweak.sourceforge.net). | |
13 | */ | |
14 | ||
15 | #include <linux/config.h> | |
16 | #include <linux/types.h> | |
17 | #include <linux/kernel.h> | |
18 | #include <linux/pci.h> | |
19 | #include <linux/init.h> | |
20 | #include <linux/delay.h> | |
25be5e6c | 21 | #include <linux/acpi.h> |
bc56b9e0 | 22 | #include "pci.h" |
1da177e4 LT |
23 | |
24 | /* Deal with broken BIOS'es that neglect to enable passive release, | |
25 | which can cause problems in combination with the 82441FX/PPro MTRRs */ | |
26 | static void __devinit quirk_passive_release(struct pci_dev *dev) | |
27 | { | |
28 | struct pci_dev *d = NULL; | |
29 | unsigned char dlc; | |
30 | ||
31 | /* We have to make sure a particular bit is set in the PIIX3 | |
32 | ISA bridge, so we have to go out and find it. */ | |
33 | while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { | |
34 | pci_read_config_byte(d, 0x82, &dlc); | |
35 | if (!(dlc & 1<<1)) { | |
36 | printk(KERN_ERR "PCI: PIIX3: Enabling Passive Release on %s\n", pci_name(d)); | |
37 | dlc |= 1<<1; | |
38 | pci_write_config_byte(d, 0x82, dlc); | |
39 | } | |
40 | } | |
41 | } | |
42 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release ); | |
43 | ||
44 | /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround | |
45 | but VIA don't answer queries. If you happen to have good contacts at VIA | |
46 | ask them for me please -- Alan | |
47 | ||
48 | This appears to be BIOS not version dependent. So presumably there is a | |
49 | chipset level fix */ | |
50 | int isa_dma_bridge_buggy; /* Exported */ | |
51 | ||
52 | static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev) | |
53 | { | |
54 | if (!isa_dma_bridge_buggy) { | |
55 | isa_dma_bridge_buggy=1; | |
56 | printk(KERN_INFO "Activating ISA DMA hang workarounds.\n"); | |
57 | } | |
58 | } | |
59 | /* | |
60 | * Its not totally clear which chipsets are the problematic ones | |
61 | * We know 82C586 and 82C596 variants are affected. | |
62 | */ | |
63 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs ); | |
64 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs ); | |
65 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs ); | |
66 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs ); | |
67 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs ); | |
68 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs ); | |
69 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs ); | |
70 | ||
71 | int pci_pci_problems; | |
72 | ||
73 | /* | |
74 | * Chipsets where PCI->PCI transfers vanish or hang | |
75 | */ | |
76 | static void __devinit quirk_nopcipci(struct pci_dev *dev) | |
77 | { | |
78 | if ((pci_pci_problems & PCIPCI_FAIL)==0) { | |
79 | printk(KERN_INFO "Disabling direct PCI/PCI transfers.\n"); | |
80 | pci_pci_problems |= PCIPCI_FAIL; | |
81 | } | |
82 | } | |
83 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci ); | |
84 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci ); | |
85 | ||
86 | /* | |
87 | * Triton requires workarounds to be used by the drivers | |
88 | */ | |
89 | static void __devinit quirk_triton(struct pci_dev *dev) | |
90 | { | |
91 | if ((pci_pci_problems&PCIPCI_TRITON)==0) { | |
92 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
93 | pci_pci_problems |= PCIPCI_TRITON; | |
94 | } | |
95 | } | |
96 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton ); | |
97 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton ); | |
98 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton ); | |
99 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton ); | |
100 | ||
101 | /* | |
102 | * VIA Apollo KT133 needs PCI latency patch | |
103 | * Made according to a windows driver based patch by George E. Breese | |
104 | * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm | |
105 | * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for | |
106 | * the info on which Mr Breese based his work. | |
107 | * | |
108 | * Updated based on further information from the site and also on | |
109 | * information provided by VIA | |
110 | */ | |
111 | static void __devinit quirk_vialatency(struct pci_dev *dev) | |
112 | { | |
113 | struct pci_dev *p; | |
114 | u8 rev; | |
115 | u8 busarb; | |
116 | /* Ok we have a potential problem chipset here. Now see if we have | |
117 | a buggy southbridge */ | |
118 | ||
119 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); | |
120 | if (p!=NULL) { | |
121 | pci_read_config_byte(p, PCI_CLASS_REVISION, &rev); | |
122 | /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ | |
123 | /* Check for buggy part revisions */ | |
124 | if (rev < 0x40 || rev > 0x42) | |
125 | goto exit; | |
126 | } else { | |
127 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); | |
128 | if (p==NULL) /* No problem parts */ | |
129 | goto exit; | |
130 | pci_read_config_byte(p, PCI_CLASS_REVISION, &rev); | |
131 | /* Check for buggy part revisions */ | |
132 | if (rev < 0x10 || rev > 0x12) | |
133 | goto exit; | |
134 | } | |
135 | ||
136 | /* | |
137 | * Ok we have the problem. Now set the PCI master grant to | |
138 | * occur every master grant. The apparent bug is that under high | |
139 | * PCI load (quite common in Linux of course) you can get data | |
140 | * loss when the CPU is held off the bus for 3 bus master requests | |
141 | * This happens to include the IDE controllers.... | |
142 | * | |
143 | * VIA only apply this fix when an SB Live! is present but under | |
144 | * both Linux and Windows this isnt enough, and we have seen | |
145 | * corruption without SB Live! but with things like 3 UDMA IDE | |
146 | * controllers. So we ignore that bit of the VIA recommendation.. | |
147 | */ | |
148 | ||
149 | pci_read_config_byte(dev, 0x76, &busarb); | |
150 | /* Set bit 4 and bi 5 of byte 76 to 0x01 | |
151 | "Master priority rotation on every PCI master grant */ | |
152 | busarb &= ~(1<<5); | |
153 | busarb |= (1<<4); | |
154 | pci_write_config_byte(dev, 0x76, busarb); | |
155 | printk(KERN_INFO "Applying VIA southbridge workaround.\n"); | |
156 | exit: | |
157 | pci_dev_put(p); | |
158 | } | |
159 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency ); | |
160 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency ); | |
161 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency ); | |
162 | ||
163 | /* | |
164 | * VIA Apollo VP3 needs ETBF on BT848/878 | |
165 | */ | |
166 | static void __devinit quirk_viaetbf(struct pci_dev *dev) | |
167 | { | |
168 | if ((pci_pci_problems&PCIPCI_VIAETBF)==0) { | |
169 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
170 | pci_pci_problems |= PCIPCI_VIAETBF; | |
171 | } | |
172 | } | |
173 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf ); | |
174 | ||
175 | static void __devinit quirk_vsfx(struct pci_dev *dev) | |
176 | { | |
177 | if ((pci_pci_problems&PCIPCI_VSFX)==0) { | |
178 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
179 | pci_pci_problems |= PCIPCI_VSFX; | |
180 | } | |
181 | } | |
182 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx ); | |
183 | ||
184 | /* | |
185 | * Ali Magik requires workarounds to be used by the drivers | |
186 | * that DMA to AGP space. Latency must be set to 0xA and triton | |
187 | * workaround applied too | |
188 | * [Info kindly provided by ALi] | |
189 | */ | |
190 | static void __init quirk_alimagik(struct pci_dev *dev) | |
191 | { | |
192 | if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) { | |
193 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
194 | pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; | |
195 | } | |
196 | } | |
197 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik ); | |
198 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik ); | |
199 | ||
200 | /* | |
201 | * Natoma has some interesting boundary conditions with Zoran stuff | |
202 | * at least | |
203 | */ | |
204 | static void __devinit quirk_natoma(struct pci_dev *dev) | |
205 | { | |
206 | if ((pci_pci_problems&PCIPCI_NATOMA)==0) { | |
207 | printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n"); | |
208 | pci_pci_problems |= PCIPCI_NATOMA; | |
209 | } | |
210 | } | |
211 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma ); | |
212 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma ); | |
213 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma ); | |
214 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma ); | |
215 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma ); | |
216 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma ); | |
217 | ||
218 | /* | |
219 | * This chip can cause PCI parity errors if config register 0xA0 is read | |
220 | * while DMAs are occurring. | |
221 | */ | |
222 | static void __devinit quirk_citrine(struct pci_dev *dev) | |
223 | { | |
224 | dev->cfg_size = 0xA0; | |
225 | } | |
226 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine ); | |
227 | ||
228 | /* | |
229 | * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. | |
230 | * If it's needed, re-allocate the region. | |
231 | */ | |
232 | static void __devinit quirk_s3_64M(struct pci_dev *dev) | |
233 | { | |
234 | struct resource *r = &dev->resource[0]; | |
235 | ||
236 | if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { | |
237 | r->start = 0; | |
238 | r->end = 0x3ffffff; | |
239 | } | |
240 | } | |
241 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M ); | |
242 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M ); | |
243 | ||
244 | static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr) | |
245 | { | |
246 | region &= ~(size-1); | |
247 | if (region) { | |
085ae41f | 248 | struct pci_bus_region bus_region; |
1da177e4 LT |
249 | struct resource *res = dev->resource + nr; |
250 | ||
251 | res->name = pci_name(dev); | |
252 | res->start = region; | |
253 | res->end = region + size - 1; | |
254 | res->flags = IORESOURCE_IO; | |
085ae41f DM |
255 | |
256 | /* Convert from PCI bus to resource space. */ | |
257 | bus_region.start = res->start; | |
258 | bus_region.end = res->end; | |
259 | pcibios_bus_to_resource(dev, res, &bus_region); | |
260 | ||
1da177e4 LT |
261 | pci_claim_resource(dev, nr); |
262 | } | |
263 | } | |
264 | ||
265 | /* | |
266 | * ATI Northbridge setups MCE the processor if you even | |
267 | * read somewhere between 0x3b0->0x3bb or read 0x3d3 | |
268 | */ | |
269 | static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev) | |
270 | { | |
271 | printk(KERN_INFO "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.\n"); | |
272 | /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ | |
273 | request_region(0x3b0, 0x0C, "RadeonIGP"); | |
274 | request_region(0x3d3, 0x01, "RadeonIGP"); | |
275 | } | |
276 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce ); | |
277 | ||
278 | /* | |
279 | * Let's make the southbridge information explicit instead | |
280 | * of having to worry about people probing the ACPI areas, | |
281 | * for example.. (Yes, it happens, and if you read the wrong | |
282 | * ACPI register it will put the machine to sleep with no | |
283 | * way of waking it up again. Bummer). | |
284 | * | |
285 | * ALI M7101: Two IO regions pointed to by words at | |
286 | * 0xE0 (64 bytes of ACPI registers) | |
287 | * 0xE2 (32 bytes of SMB registers) | |
288 | */ | |
289 | static void __devinit quirk_ali7101_acpi(struct pci_dev *dev) | |
290 | { | |
291 | u16 region; | |
292 | ||
293 | pci_read_config_word(dev, 0xE0, ®ion); | |
294 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES); | |
295 | pci_read_config_word(dev, 0xE2, ®ion); | |
296 | quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1); | |
297 | } | |
298 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi ); | |
299 | ||
300 | /* | |
301 | * PIIX4 ACPI: Two IO regions pointed to by longwords at | |
302 | * 0x40 (64 bytes of ACPI registers) | |
303 | * 0x90 (32 bytes of SMB registers) | |
304 | */ | |
305 | static void __devinit quirk_piix4_acpi(struct pci_dev *dev) | |
306 | { | |
307 | u32 region; | |
308 | ||
309 | pci_read_config_dword(dev, 0x40, ®ion); | |
310 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES); | |
311 | pci_read_config_dword(dev, 0x90, ®ion); | |
312 | quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1); | |
313 | } | |
314 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi ); | |
315 | ||
316 | /* | |
317 | * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at | |
318 | * 0x40 (128 bytes of ACPI, GPIO & TCO registers) | |
319 | * 0x58 (64 bytes of GPIO I/O space) | |
320 | */ | |
321 | static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev) | |
322 | { | |
323 | u32 region; | |
324 | ||
325 | pci_read_config_dword(dev, 0x40, ®ion); | |
326 | quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES); | |
327 | ||
328 | pci_read_config_dword(dev, 0x58, ®ion); | |
329 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1); | |
330 | } | |
331 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi ); | |
332 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi ); | |
333 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi ); | |
334 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi ); | |
335 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi ); | |
336 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi ); | |
337 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi ); | |
338 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi ); | |
339 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi ); | |
3aa8c4fe | 340 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi ); |
1da177e4 LT |
341 | |
342 | /* | |
343 | * VIA ACPI: One IO region pointed to by longword at | |
344 | * 0x48 or 0x20 (256 bytes of ACPI registers) | |
345 | */ | |
346 | static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev) | |
347 | { | |
348 | u8 rev; | |
349 | u32 region; | |
350 | ||
351 | pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); | |
352 | if (rev & 0x10) { | |
353 | pci_read_config_dword(dev, 0x48, ®ion); | |
354 | region &= PCI_BASE_ADDRESS_IO_MASK; | |
355 | quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES); | |
356 | } | |
357 | } | |
358 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi ); | |
359 | ||
360 | /* | |
361 | * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at | |
362 | * 0x48 (256 bytes of ACPI registers) | |
363 | * 0x70 (128 bytes of hardware monitoring register) | |
364 | * 0x90 (16 bytes of SMB registers) | |
365 | */ | |
366 | static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) | |
367 | { | |
368 | u16 hm; | |
369 | u32 smb; | |
370 | ||
371 | quirk_vt82c586_acpi(dev); | |
372 | ||
373 | pci_read_config_word(dev, 0x70, &hm); | |
374 | hm &= PCI_BASE_ADDRESS_IO_MASK; | |
375 | quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1); | |
376 | ||
377 | pci_read_config_dword(dev, 0x90, &smb); | |
378 | smb &= PCI_BASE_ADDRESS_IO_MASK; | |
379 | quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2); | |
380 | } | |
381 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi ); | |
382 | ||
6d85f29b IK |
383 | /* |
384 | * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at | |
385 | * 0x88 (128 bytes of power management registers) | |
386 | * 0xd0 (16 bytes of SMB registers) | |
387 | */ | |
388 | static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) | |
389 | { | |
390 | u16 pm, smb; | |
391 | ||
392 | pci_read_config_word(dev, 0x88, &pm); | |
393 | pm &= PCI_BASE_ADDRESS_IO_MASK; | |
394 | quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES); | |
395 | ||
396 | pci_read_config_word(dev, 0xd0, &smb); | |
397 | smb &= PCI_BASE_ADDRESS_IO_MASK; | |
398 | quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1); | |
399 | } | |
400 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); | |
401 | ||
1da177e4 LT |
402 | |
403 | #ifdef CONFIG_X86_IO_APIC | |
404 | ||
405 | #include <asm/io_apic.h> | |
406 | ||
407 | /* | |
408 | * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip | |
409 | * devices to the external APIC. | |
410 | * | |
411 | * TODO: When we have device-specific interrupt routers, | |
412 | * this code will go away from quirks. | |
413 | */ | |
414 | static void __devinit quirk_via_ioapic(struct pci_dev *dev) | |
415 | { | |
416 | u8 tmp; | |
417 | ||
418 | if (nr_ioapics < 1) | |
419 | tmp = 0; /* nothing routed to external APIC */ | |
420 | else | |
421 | tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ | |
422 | ||
423 | printk(KERN_INFO "PCI: %sbling Via external APIC routing\n", | |
424 | tmp == 0 ? "Disa" : "Ena"); | |
425 | ||
426 | /* Offset 0x58: External APIC IRQ output control */ | |
427 | pci_write_config_byte (dev, 0x58, tmp); | |
428 | } | |
429 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic ); | |
430 | ||
a1740913 KW |
431 | /* |
432 | * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit. | |
433 | * This leads to doubled level interrupt rates. | |
434 | * Set this bit to get rid of cycle wastage. | |
435 | * Otherwise uncritical. | |
436 | */ | |
437 | static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) | |
438 | { | |
439 | u8 misc_control2; | |
440 | #define BYPASS_APIC_DEASSERT 8 | |
441 | ||
442 | pci_read_config_byte(dev, 0x5B, &misc_control2); | |
443 | if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { | |
444 | printk(KERN_INFO "PCI: Bypassing VIA 8237 APIC De-Assert Message\n"); | |
445 | pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); | |
446 | } | |
447 | } | |
448 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); | |
449 | ||
1da177e4 LT |
450 | /* |
451 | * The AMD io apic can hang the box when an apic irq is masked. | |
452 | * We check all revs >= B0 (yet not in the pre production!) as the bug | |
453 | * is currently marked NoFix | |
454 | * | |
455 | * We have multiple reports of hangs with this chipset that went away with | |
456 | * noapic specified. For the moment we assume its the errata. We may be wrong | |
457 | * of course. However the advice is demonstrably good even if so.. | |
458 | */ | |
459 | static void __devinit quirk_amd_ioapic(struct pci_dev *dev) | |
460 | { | |
461 | u8 rev; | |
462 | ||
463 | pci_read_config_byte(dev, PCI_REVISION_ID, &rev); | |
464 | if (rev >= 0x02) { | |
465 | printk(KERN_WARNING "I/O APIC: AMD Errata #22 may be present. In the event of instability try\n"); | |
466 | printk(KERN_WARNING " : booting with the \"noapic\" option.\n"); | |
467 | } | |
468 | } | |
469 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic ); | |
470 | ||
471 | static void __init quirk_ioapic_rmw(struct pci_dev *dev) | |
472 | { | |
473 | if (dev->devfn == 0 && dev->bus->number == 0) | |
474 | sis_apic_bug = 1; | |
475 | } | |
476 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw ); | |
477 | ||
478 | int pci_msi_quirk; | |
479 | ||
480 | #define AMD8131_revA0 0x01 | |
481 | #define AMD8131_revB0 0x11 | |
482 | #define AMD8131_MISC 0x40 | |
483 | #define AMD8131_NIOAMODE_BIT 0 | |
484 | static void __init quirk_amd_8131_ioapic(struct pci_dev *dev) | |
485 | { | |
486 | unsigned char revid, tmp; | |
487 | ||
488 | pci_msi_quirk = 1; | |
489 | printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n"); | |
490 | ||
491 | if (nr_ioapics == 0) | |
492 | return; | |
493 | ||
494 | pci_read_config_byte(dev, PCI_REVISION_ID, &revid); | |
495 | if (revid == AMD8131_revA0 || revid == AMD8131_revB0) { | |
496 | printk(KERN_INFO "Fixing up AMD8131 IOAPIC mode\n"); | |
497 | pci_read_config_byte( dev, AMD8131_MISC, &tmp); | |
498 | tmp &= ~(1 << AMD8131_NIOAMODE_BIT); | |
499 | pci_write_config_byte( dev, AMD8131_MISC, tmp); | |
500 | } | |
501 | } | |
502 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic ); | |
503 | ||
1e062767 NS |
504 | static void __init quirk_svw_msi(struct pci_dev *dev) |
505 | { | |
506 | pci_msi_quirk = 1; | |
507 | printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n"); | |
508 | } | |
509 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi ); | |
1da177e4 LT |
510 | #endif /* CONFIG_X86_IO_APIC */ |
511 | ||
512 | ||
1da177e4 LT |
513 | /* |
514 | * FIXME: it is questionable that quirk_via_acpi | |
515 | * is needed. It shows up as an ISA bridge, and does not | |
516 | * support the PCI_INTERRUPT_LINE register at all. Therefore | |
517 | * it seems like setting the pci_dev's 'irq' to the | |
518 | * value of the ACPI SCI interrupt is only done for convenience. | |
519 | * -jgarzik | |
520 | */ | |
521 | static void __devinit quirk_via_acpi(struct pci_dev *d) | |
522 | { | |
523 | /* | |
524 | * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 | |
525 | */ | |
526 | u8 irq; | |
527 | pci_read_config_byte(d, 0x42, &irq); | |
528 | irq &= 0xf; | |
529 | if (irq && (irq != 2)) | |
530 | d->irq = irq; | |
531 | } | |
532 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi ); | |
533 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi ); | |
534 | ||
93cffffa BH |
535 | /* |
536 | * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip | |
537 | * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature: | |
538 | * when written, it makes an internal connection to the PIC. | |
539 | * For these devices, this register is defined to be 4 bits wide. | |
540 | * Normally this is fine. However for IO-APIC motherboards, or | |
541 | * non-x86 architectures (yes Via exists on PPC among other places), | |
542 | * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get | |
543 | * interrupts delivered properly. | |
544 | */ | |
545 | static void quirk_via_irq(struct pci_dev *dev) | |
25be5e6c LB |
546 | { |
547 | u8 irq, new_irq; | |
548 | ||
25be5e6c LB |
549 | new_irq = dev->irq & 0xf; |
550 | pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); | |
551 | if (new_irq != irq) { | |
93cffffa | 552 | printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n", |
25be5e6c LB |
553 | pci_name(dev), irq, new_irq); |
554 | udelay(15); /* unknown if delay really needed */ | |
555 | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); | |
556 | } | |
557 | } | |
93cffffa | 558 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); |
25be5e6c | 559 | |
1da177e4 LT |
560 | /* |
561 | * PIIX3 USB: We have to disable USB interrupts that are | |
562 | * hardwired to PIRQD# and may be shared with an | |
563 | * external device. | |
564 | * | |
565 | * Legacy Support Register (LEGSUP): | |
566 | * bit13: USB PIRQ Enable (USBPIRQDEN), | |
567 | * bit4: Trap/SMI On IRQ Enable (USBSMIEN). | |
568 | * | |
569 | * We mask out all r/wc bits, too. | |
570 | */ | |
571 | static void __devinit quirk_piix3_usb(struct pci_dev *dev) | |
572 | { | |
573 | u16 legsup; | |
574 | ||
575 | pci_read_config_word(dev, 0xc0, &legsup); | |
576 | legsup &= 0x50ef; | |
577 | pci_write_config_word(dev, 0xc0, legsup); | |
578 | } | |
579 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb ); | |
580 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb ); | |
581 | ||
582 | /* | |
583 | * VIA VT82C598 has its device ID settable and many BIOSes | |
584 | * set it to the ID of VT82C597 for backward compatibility. | |
585 | * We need to switch it off to be able to recognize the real | |
586 | * type of the chip. | |
587 | */ | |
588 | static void __devinit quirk_vt82c598_id(struct pci_dev *dev) | |
589 | { | |
590 | pci_write_config_byte(dev, 0xfc, 0); | |
591 | pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); | |
592 | } | |
593 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id ); | |
594 | ||
595 | /* | |
596 | * CardBus controllers have a legacy base address that enables them | |
597 | * to respond as i82365 pcmcia controllers. We don't want them to | |
598 | * do this even if the Linux CardBus driver is not loaded, because | |
599 | * the Linux i82365 driver does not (and should not) handle CardBus. | |
600 | */ | |
601 | static void __devinit quirk_cardbus_legacy(struct pci_dev *dev) | |
602 | { | |
603 | if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class) | |
604 | return; | |
605 | pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); | |
606 | } | |
607 | DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); | |
608 | ||
609 | /* | |
610 | * Following the PCI ordering rules is optional on the AMD762. I'm not | |
611 | * sure what the designers were smoking but let's not inhale... | |
612 | * | |
613 | * To be fair to AMD, it follows the spec by default, its BIOS people | |
614 | * who turn it off! | |
615 | */ | |
616 | static void __devinit quirk_amd_ordering(struct pci_dev *dev) | |
617 | { | |
618 | u32 pcic; | |
619 | pci_read_config_dword(dev, 0x4C, &pcic); | |
620 | if ((pcic&6)!=6) { | |
621 | pcic |= 6; | |
622 | printk(KERN_WARNING "BIOS failed to enable PCI standards compliance, fixing this error.\n"); | |
623 | pci_write_config_dword(dev, 0x4C, pcic); | |
624 | pci_read_config_dword(dev, 0x84, &pcic); | |
625 | pcic |= (1<<23); /* Required in this mode */ | |
626 | pci_write_config_dword(dev, 0x84, pcic); | |
627 | } | |
628 | } | |
629 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering ); | |
630 | ||
631 | /* | |
632 | * DreamWorks provided workaround for Dunord I-3000 problem | |
633 | * | |
634 | * This card decodes and responds to addresses not apparently | |
635 | * assigned to it. We force a larger allocation to ensure that | |
636 | * nothing gets put too close to it. | |
637 | */ | |
638 | static void __devinit quirk_dunord ( struct pci_dev * dev ) | |
639 | { | |
640 | struct resource *r = &dev->resource [1]; | |
641 | r->start = 0; | |
642 | r->end = 0xffffff; | |
643 | } | |
644 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord ); | |
645 | ||
646 | /* | |
647 | * i82380FB mobile docking controller: its PCI-to-PCI bridge | |
648 | * is subtractive decoding (transparent), and does indicate this | |
649 | * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 | |
650 | * instead of 0x01. | |
651 | */ | |
652 | static void __devinit quirk_transparent_bridge(struct pci_dev *dev) | |
653 | { | |
654 | dev->transparent = 1; | |
655 | } | |
656 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge ); | |
657 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge ); | |
658 | ||
659 | /* | |
660 | * Common misconfiguration of the MediaGX/Geode PCI master that will | |
661 | * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 | |
662 | * datasheets found at http://www.national.com/ds/GX for info on what | |
663 | * these bits do. <christer@weinigel.se> | |
664 | */ | |
665 | static void __init quirk_mediagx_master(struct pci_dev *dev) | |
666 | { | |
667 | u8 reg; | |
668 | pci_read_config_byte(dev, 0x41, ®); | |
669 | if (reg & 2) { | |
670 | reg &= ~2; | |
671 | printk(KERN_INFO "PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg); | |
672 | pci_write_config_byte(dev, 0x41, reg); | |
673 | } | |
674 | } | |
675 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master ); | |
676 | ||
677 | /* | |
678 | * As per PCI spec, ignore base address registers 0-3 of the IDE controllers | |
679 | * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and | |
680 | * secondary channels respectively). If the device reports Compatible mode | |
681 | * but does use BAR0-3 for address decoding, we assume that firmware has | |
682 | * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374). | |
683 | * Exceptions (if they exist) must be handled in chip/architecture specific | |
684 | * fixups. | |
685 | * | |
686 | * Note: for non x86 people. You may need an arch specific quirk to handle | |
687 | * moving IDE devices to native mode as well. Some plug in card devices power | |
688 | * up in compatible mode and assume the BIOS will adjust them. | |
689 | * | |
690 | * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as | |
691 | * we do now ? We don't want is pci_enable_device to come along | |
692 | * and assign new resources. Both approaches work for that. | |
693 | */ | |
694 | static void __devinit quirk_ide_bases(struct pci_dev *dev) | |
695 | { | |
696 | struct resource *res; | |
697 | int first_bar = 2, last_bar = 0; | |
698 | ||
699 | if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) | |
700 | return; | |
701 | ||
702 | res = &dev->resource[0]; | |
703 | ||
704 | /* primary channel: ProgIf bit 0, BAR0, BAR1 */ | |
705 | if (!(dev->class & 1) && (res[0].flags || res[1].flags)) { | |
706 | res[0].start = res[0].end = res[0].flags = 0; | |
707 | res[1].start = res[1].end = res[1].flags = 0; | |
708 | first_bar = 0; | |
709 | last_bar = 1; | |
710 | } | |
711 | ||
712 | /* secondary channel: ProgIf bit 2, BAR2, BAR3 */ | |
713 | if (!(dev->class & 4) && (res[2].flags || res[3].flags)) { | |
714 | res[2].start = res[2].end = res[2].flags = 0; | |
715 | res[3].start = res[3].end = res[3].flags = 0; | |
716 | last_bar = 3; | |
717 | } | |
718 | ||
719 | if (!last_bar) | |
720 | return; | |
721 | ||
722 | printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n", | |
723 | first_bar, last_bar, pci_name(dev)); | |
724 | } | |
725 | DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases); | |
726 | ||
727 | /* | |
728 | * Ensure C0 rev restreaming is off. This is normally done by | |
729 | * the BIOS but in the odd case it is not the results are corruption | |
730 | * hence the presence of a Linux check | |
731 | */ | |
732 | static void __init quirk_disable_pxb(struct pci_dev *pdev) | |
733 | { | |
734 | u16 config; | |
735 | u8 rev; | |
736 | ||
737 | pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); | |
738 | if (rev != 0x04) /* Only C0 requires this */ | |
739 | return; | |
740 | pci_read_config_word(pdev, 0x40, &config); | |
741 | if (config & (1<<6)) { | |
742 | config &= ~(1<<6); | |
743 | pci_write_config_word(pdev, 0x40, config); | |
744 | printk(KERN_INFO "PCI: C0 revision 450NX. Disabling PCI restreaming.\n"); | |
745 | } | |
746 | } | |
747 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb ); | |
748 | ||
1da177e4 LT |
749 | |
750 | /* | |
751 | * Serverworks CSB5 IDE does not fully support native mode | |
752 | */ | |
753 | static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) | |
754 | { | |
755 | u8 prog; | |
756 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
757 | if (prog & 5) { | |
758 | prog &= ~5; | |
759 | pdev->class &= ~5; | |
760 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
761 | /* need to re-assign BARs for compat mode */ | |
762 | quirk_ide_bases(pdev); | |
763 | } | |
764 | } | |
765 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide ); | |
766 | ||
767 | /* | |
768 | * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same | |
769 | */ | |
770 | static void __init quirk_ide_samemode(struct pci_dev *pdev) | |
771 | { | |
772 | u8 prog; | |
773 | ||
774 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
775 | ||
776 | if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { | |
777 | printk(KERN_INFO "PCI: IDE mode mismatch; forcing legacy mode\n"); | |
778 | prog &= ~5; | |
779 | pdev->class &= ~5; | |
780 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
781 | /* need to re-assign BARs for compat mode */ | |
782 | quirk_ide_bases(pdev); | |
783 | } | |
784 | } | |
785 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); | |
786 | ||
787 | /* This was originally an Alpha specific thing, but it really fits here. | |
788 | * The i82375 PCI/EISA bridge appears as non-classified. Fix that. | |
789 | */ | |
790 | static void __init quirk_eisa_bridge(struct pci_dev *dev) | |
791 | { | |
792 | dev->class = PCI_CLASS_BRIDGE_EISA << 8; | |
793 | } | |
794 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge ); | |
795 | ||
796 | /* | |
797 | * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge | |
798 | * is not activated. The myth is that Asus said that they do not want the | |
799 | * users to be irritated by just another PCI Device in the Win98 device | |
800 | * manager. (see the file prog/hotplug/README.p4b in the lm_sensors | |
801 | * package 2.7.0 for details) | |
802 | * | |
803 | * The SMBus PCI Device can be activated by setting a bit in the ICH LPC | |
804 | * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it | |
805 | * becomes necessary to do this tweak in two steps -- I've chosen the Host | |
806 | * bridge as trigger. | |
807 | */ | |
808 | static int __initdata asus_hides_smbus = 0; | |
809 | ||
810 | static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) | |
811 | { | |
812 | if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
813 | if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) | |
814 | switch(dev->subsystem_device) { | |
a00db371 | 815 | case 0x8025: /* P4B-LX */ |
1da177e4 LT |
816 | case 0x8070: /* P4B */ |
817 | case 0x8088: /* P4B533 */ | |
818 | case 0x1626: /* L3C notebook */ | |
819 | asus_hides_smbus = 1; | |
820 | } | |
821 | if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) | |
822 | switch(dev->subsystem_device) { | |
823 | case 0x80b1: /* P4GE-V */ | |
824 | case 0x80b2: /* P4PE */ | |
825 | case 0x8093: /* P4B533-V */ | |
826 | asus_hides_smbus = 1; | |
827 | } | |
828 | if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) | |
829 | switch(dev->subsystem_device) { | |
830 | case 0x8030: /* P4T533 */ | |
831 | asus_hides_smbus = 1; | |
832 | } | |
833 | if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) | |
834 | switch (dev->subsystem_device) { | |
835 | case 0x8070: /* P4G8X Deluxe */ | |
836 | asus_hides_smbus = 1; | |
837 | } | |
838 | if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) | |
839 | switch (dev->subsystem_device) { | |
840 | case 0x1751: /* M2N notebook */ | |
841 | case 0x1821: /* M5N notebook */ | |
842 | asus_hides_smbus = 1; | |
843 | } | |
844 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
845 | switch (dev->subsystem_device) { | |
846 | case 0x184b: /* W1N notebook */ | |
847 | case 0x186a: /* M6Ne notebook */ | |
848 | asus_hides_smbus = 1; | |
849 | } | |
850 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { | |
851 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
852 | switch(dev->subsystem_device) { | |
853 | case 0x088C: /* HP Compaq nc8000 */ | |
854 | case 0x0890: /* HP Compaq nc6000 */ | |
855 | asus_hides_smbus = 1; | |
856 | } | |
857 | if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) | |
858 | switch (dev->subsystem_device) { | |
859 | case 0x12bc: /* HP D330L */ | |
860 | asus_hides_smbus = 1; | |
861 | } | |
862 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) { | |
863 | if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) | |
864 | switch(dev->subsystem_device) { | |
865 | case 0x0001: /* Toshiba Satellite A40 */ | |
866 | asus_hides_smbus = 1; | |
867 | } | |
e96e2f14 DG |
868 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
869 | switch(dev->subsystem_device) { | |
870 | case 0x0001: /* Toshiba Tecra M2 */ | |
871 | asus_hides_smbus = 1; | |
872 | } | |
1da177e4 LT |
873 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { |
874 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
875 | switch(dev->subsystem_device) { | |
876 | case 0xC00C: /* Samsung P35 notebook */ | |
877 | asus_hides_smbus = 1; | |
878 | } | |
c87f883e RIZ |
879 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { |
880 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
881 | switch(dev->subsystem_device) { | |
882 | case 0x0058: /* Compaq Evo N620c */ | |
883 | asus_hides_smbus = 1; | |
884 | } | |
1da177e4 LT |
885 | } |
886 | } | |
887 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge ); | |
888 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge ); | |
889 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge ); | |
890 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge ); | |
891 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge ); | |
892 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge ); | |
893 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge ); | |
894 | ||
895 | static void __init asus_hides_smbus_lpc(struct pci_dev *dev) | |
896 | { | |
897 | u16 val; | |
898 | ||
899 | if (likely(!asus_hides_smbus)) | |
900 | return; | |
901 | ||
902 | pci_read_config_word(dev, 0xF2, &val); | |
903 | if (val & 0x8) { | |
904 | pci_write_config_word(dev, 0xF2, val & (~0x8)); | |
905 | pci_read_config_word(dev, 0xF2, &val); | |
906 | if (val & 0x8) | |
907 | printk(KERN_INFO "PCI: i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val); | |
908 | else | |
909 | printk(KERN_INFO "PCI: Enabled i801 SMBus device\n"); | |
910 | } | |
911 | } | |
912 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc ); | |
913 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc ); | |
914 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc ); | |
915 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc ); | |
916 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc ); | |
917 | ||
918 | /* | |
919 | * SiS 96x south bridge: BIOS typically hides SMBus device... | |
920 | */ | |
921 | static void __init quirk_sis_96x_smbus(struct pci_dev *dev) | |
922 | { | |
923 | u8 val = 0; | |
924 | printk(KERN_INFO "Enabling SiS 96x SMBus.\n"); | |
925 | pci_read_config_byte(dev, 0x77, &val); | |
926 | pci_write_config_byte(dev, 0x77, val & ~0x10); | |
927 | pci_read_config_byte(dev, 0x77, &val); | |
928 | } | |
929 | ||
930 | ||
931 | #define UHCI_USBLEGSUP 0xc0 /* legacy support */ | |
932 | #define UHCI_USBCMD 0 /* command register */ | |
933 | #define UHCI_USBSTS 2 /* status register */ | |
934 | #define UHCI_USBINTR 4 /* interrupt register */ | |
935 | #define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ | |
936 | #define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ | |
937 | #define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */ | |
938 | #define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */ | |
939 | #define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */ | |
940 | ||
941 | #define OHCI_CONTROL 0x04 | |
942 | #define OHCI_CMDSTATUS 0x08 | |
943 | #define OHCI_INTRSTATUS 0x0c | |
944 | #define OHCI_INTRENABLE 0x10 | |
945 | #define OHCI_INTRDISABLE 0x14 | |
946 | #define OHCI_OCR (1 << 3) /* ownership change request */ | |
947 | #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ | |
948 | #define OHCI_INTR_OC (1 << 30) /* ownership change */ | |
949 | ||
950 | #define EHCI_HCC_PARAMS 0x08 /* extended capabilities */ | |
951 | #define EHCI_USBCMD 0 /* command register */ | |
952 | #define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ | |
953 | #define EHCI_USBSTS 4 /* status register */ | |
954 | #define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */ | |
955 | #define EHCI_USBINTR 8 /* interrupt register */ | |
956 | #define EHCI_USBLEGSUP 0 /* legacy support register */ | |
957 | #define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ | |
958 | #define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */ | |
959 | #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ | |
960 | #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ | |
961 | ||
962 | int usb_early_handoff __devinitdata = 0; | |
963 | static int __init usb_handoff_early(char *str) | |
964 | { | |
965 | usb_early_handoff = 1; | |
966 | return 0; | |
967 | } | |
968 | __setup("usb-handoff", usb_handoff_early); | |
969 | ||
970 | static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) | |
971 | { | |
972 | unsigned long base = 0; | |
973 | int wait_time, delta; | |
974 | u16 val, sts; | |
975 | int i; | |
976 | ||
977 | for (i = 0; i < PCI_ROM_RESOURCE; i++) | |
978 | if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { | |
979 | base = pci_resource_start(pdev, i); | |
980 | break; | |
981 | } | |
982 | ||
983 | if (!base) | |
984 | return; | |
985 | ||
986 | /* | |
987 | * stop controller | |
988 | */ | |
989 | sts = inw(base + UHCI_USBSTS); | |
990 | val = inw(base + UHCI_USBCMD); | |
991 | val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE); | |
992 | outw(val, base + UHCI_USBCMD); | |
993 | ||
994 | /* | |
995 | * wait while it stops if it was running | |
996 | */ | |
997 | if ((sts & UHCI_USBSTS_HALTED) == 0) | |
998 | { | |
999 | wait_time = 1000; | |
1000 | delta = 100; | |
1001 | ||
1002 | do { | |
1003 | outw(0x1f, base + UHCI_USBSTS); | |
1004 | udelay(delta); | |
1005 | wait_time -= delta; | |
1006 | val = inw(base + UHCI_USBSTS); | |
1007 | if (val & UHCI_USBSTS_HALTED) | |
1008 | break; | |
1009 | } while (wait_time > 0); | |
1010 | } | |
1011 | ||
1012 | /* | |
1013 | * disable interrupts & legacy support | |
1014 | */ | |
1015 | outw(0, base + UHCI_USBINTR); | |
1016 | outw(0x1f, base + UHCI_USBSTS); | |
1017 | pci_read_config_word(pdev, UHCI_USBLEGSUP, &val); | |
1018 | if (val & 0xbf) | |
1019 | pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT); | |
1020 | ||
1021 | } | |
1022 | ||
1023 | static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) | |
1024 | { | |
1025 | void __iomem *base; | |
1026 | int wait_time; | |
1027 | ||
1028 | base = ioremap_nocache(pci_resource_start(pdev, 0), | |
1029 | pci_resource_len(pdev, 0)); | |
1030 | if (base == NULL) return; | |
1031 | ||
1032 | if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { | |
1033 | wait_time = 500; /* 0.5 seconds */ | |
1034 | writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); | |
1035 | writel(OHCI_OCR, base + OHCI_CMDSTATUS); | |
1036 | while (wait_time > 0 && | |
1037 | readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { | |
1038 | wait_time -= 10; | |
1039 | msleep(10); | |
1040 | } | |
1041 | } | |
1042 | ||
1043 | /* | |
1044 | * disable interrupts | |
1045 | */ | |
1046 | writel(~(u32)0, base + OHCI_INTRDISABLE); | |
1047 | writel(~(u32)0, base + OHCI_INTRSTATUS); | |
1048 | ||
1049 | iounmap(base); | |
1050 | } | |
1051 | ||
1052 | static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) | |
1053 | { | |
1054 | int wait_time, delta; | |
1055 | void __iomem *base, *op_reg_base; | |
1056 | u32 hcc_params, val, temp; | |
1057 | u8 cap_length; | |
1058 | ||
1059 | base = ioremap_nocache(pci_resource_start(pdev, 0), | |
1060 | pci_resource_len(pdev, 0)); | |
1061 | if (base == NULL) return; | |
1062 | ||
1063 | cap_length = readb(base); | |
1064 | op_reg_base = base + cap_length; | |
1065 | hcc_params = readl(base + EHCI_HCC_PARAMS); | |
1066 | hcc_params = (hcc_params >> 8) & 0xff; | |
1067 | if (hcc_params) { | |
1068 | pci_read_config_dword(pdev, | |
1069 | hcc_params + EHCI_USBLEGSUP, | |
1070 | &val); | |
1071 | if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) { | |
1072 | /* | |
1073 | * Ok, BIOS is in smm mode, try to hand off... | |
1074 | */ | |
1075 | pci_read_config_dword(pdev, | |
1076 | hcc_params + EHCI_USBLEGCTLSTS, | |
1077 | &temp); | |
1078 | pci_write_config_dword(pdev, | |
1079 | hcc_params + EHCI_USBLEGCTLSTS, | |
1080 | temp | EHCI_USBLEGCTLSTS_SOOE); | |
1081 | val |= EHCI_USBLEGSUP_OS; | |
1082 | pci_write_config_dword(pdev, | |
1083 | hcc_params + EHCI_USBLEGSUP, | |
1084 | val); | |
1085 | ||
1086 | wait_time = 500; | |
1087 | do { | |
1088 | msleep(10); | |
1089 | wait_time -= 10; | |
1090 | pci_read_config_dword(pdev, | |
1091 | hcc_params + EHCI_USBLEGSUP, | |
1092 | &val); | |
1093 | } while (wait_time && (val & EHCI_USBLEGSUP_BIOS)); | |
1094 | if (!wait_time) { | |
1095 | /* | |
1096 | * well, possibly buggy BIOS... | |
1097 | */ | |
1098 | printk(KERN_WARNING "EHCI early BIOS handoff " | |
1099 | "failed (BIOS bug ?)\n"); | |
1100 | pci_write_config_dword(pdev, | |
1101 | hcc_params + EHCI_USBLEGSUP, | |
1102 | EHCI_USBLEGSUP_OS); | |
1103 | pci_write_config_dword(pdev, | |
1104 | hcc_params + EHCI_USBLEGCTLSTS, | |
1105 | 0); | |
1106 | } | |
1107 | } | |
1108 | } | |
1109 | ||
1110 | /* | |
1111 | * halt EHCI & disable its interrupts in any case | |
1112 | */ | |
1113 | val = readl(op_reg_base + EHCI_USBSTS); | |
1114 | if ((val & EHCI_USBSTS_HALTED) == 0) { | |
1115 | val = readl(op_reg_base + EHCI_USBCMD); | |
1116 | val &= ~EHCI_USBCMD_RUN; | |
1117 | writel(val, op_reg_base + EHCI_USBCMD); | |
1118 | ||
1119 | wait_time = 2000; | |
1120 | delta = 100; | |
1121 | do { | |
1122 | writel(0x3f, op_reg_base + EHCI_USBSTS); | |
1123 | udelay(delta); | |
1124 | wait_time -= delta; | |
1125 | val = readl(op_reg_base + EHCI_USBSTS); | |
1126 | if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { | |
1127 | break; | |
1128 | } | |
1129 | } while (wait_time > 0); | |
1130 | } | |
1131 | writel(0, op_reg_base + EHCI_USBINTR); | |
1132 | writel(0x3f, op_reg_base + EHCI_USBSTS); | |
1133 | ||
1134 | iounmap(base); | |
1135 | ||
1136 | return; | |
1137 | } | |
1138 | ||
1139 | ||
1140 | ||
1141 | static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) | |
1142 | { | |
1143 | if (!usb_early_handoff) | |
1144 | return; | |
1145 | ||
1146 | if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */ | |
1147 | quirk_usb_handoff_uhci(pdev); | |
1148 | } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */ | |
1149 | quirk_usb_handoff_ohci(pdev); | |
1150 | } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */ | |
1151 | quirk_usb_disable_ehci(pdev); | |
1152 | } | |
1153 | ||
1154 | return; | |
1155 | } | |
1156 | DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); | |
1157 | ||
1158 | /* | |
1159 | * ... This is further complicated by the fact that some SiS96x south | |
1160 | * bridges pretend to be 85C503/5513 instead. In that case see if we | |
1161 | * spotted a compatible north bridge to make sure. | |
1162 | * (pci_find_device doesn't work yet) | |
1163 | * | |
1164 | * We can also enable the sis96x bit in the discovery register.. | |
1165 | */ | |
1166 | static int __devinitdata sis_96x_compatible = 0; | |
1167 | ||
1168 | #define SIS_DETECT_REGISTER 0x40 | |
1169 | ||
1170 | static void __init quirk_sis_503(struct pci_dev *dev) | |
1171 | { | |
1172 | u8 reg; | |
1173 | u16 devid; | |
1174 | ||
1175 | pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); | |
1176 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); | |
1177 | pci_read_config_word(dev, PCI_DEVICE_ID, &devid); | |
1178 | if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { | |
1179 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); | |
1180 | return; | |
1181 | } | |
1182 | ||
1183 | /* Make people aware that we changed the config.. */ | |
1184 | printk(KERN_WARNING "Uncovering SIS%x that hid as a SIS503 (compatible=%d)\n", devid, sis_96x_compatible); | |
1185 | ||
1186 | /* | |
1187 | * Ok, it now shows up as a 96x.. The 96x quirks are after | |
1188 | * the 503 quirk in the quirk table, so they'll automatically | |
1189 | * run and enable things like the SMBus device | |
1190 | */ | |
1191 | dev->device = devid; | |
1192 | } | |
1193 | ||
1194 | static void __init quirk_sis_96x_compatible(struct pci_dev *dev) | |
1195 | { | |
1196 | sis_96x_compatible = 1; | |
1197 | } | |
1198 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_645, quirk_sis_96x_compatible ); | |
1199 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_646, quirk_sis_96x_compatible ); | |
1200 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_648, quirk_sis_96x_compatible ); | |
1201 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_650, quirk_sis_96x_compatible ); | |
1202 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_651, quirk_sis_96x_compatible ); | |
1203 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible ); | |
1204 | ||
1205 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 ); | |
1206 | ||
1207 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus ); | |
1208 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus ); | |
1209 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus ); | |
1210 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus ); | |
1211 | ||
1212 | #ifdef CONFIG_X86_IO_APIC | |
1213 | static void __init quirk_alder_ioapic(struct pci_dev *pdev) | |
1214 | { | |
1215 | int i; | |
1216 | ||
1217 | if ((pdev->class >> 8) != 0xff00) | |
1218 | return; | |
1219 | ||
1220 | /* the first BAR is the location of the IO APIC...we must | |
1221 | * not touch this (and it's already covered by the fixmap), so | |
1222 | * forcibly insert it into the resource tree */ | |
1223 | if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) | |
1224 | insert_resource(&iomem_resource, &pdev->resource[0]); | |
1225 | ||
1226 | /* The next five BARs all seem to be rubbish, so just clean | |
1227 | * them out */ | |
1228 | for (i=1; i < 6; i++) { | |
1229 | memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); | |
1230 | } | |
1231 | ||
1232 | } | |
1233 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic ); | |
1234 | #endif | |
1235 | ||
cc675230 | 1236 | #ifdef CONFIG_SCSI_SATA_INTEL_COMBINED |
1da177e4 LT |
1237 | static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) |
1238 | { | |
1239 | u8 prog, comb, tmp; | |
1240 | int ich = 0; | |
1241 | ||
1242 | /* | |
1243 | * Narrow down to Intel SATA PCI devices. | |
1244 | */ | |
1245 | switch (pdev->device) { | |
1246 | /* PCI ids taken from drivers/scsi/ata_piix.c */ | |
1247 | case 0x24d1: | |
1248 | case 0x24df: | |
1249 | case 0x25a3: | |
1250 | case 0x25b0: | |
1251 | ich = 5; | |
1252 | break; | |
1253 | case 0x2651: | |
1254 | case 0x2652: | |
1255 | case 0x2653: | |
c368ca4e | 1256 | case 0x2680: /* ESB2 */ |
1da177e4 LT |
1257 | ich = 6; |
1258 | break; | |
1259 | case 0x27c0: | |
1260 | case 0x27c4: | |
1261 | ich = 7; | |
1262 | break; | |
1263 | default: | |
1264 | /* we do not handle this PCI device */ | |
1265 | return; | |
1266 | } | |
1267 | ||
1268 | /* | |
1269 | * Read combined mode register. | |
1270 | */ | |
1271 | pci_read_config_byte(pdev, 0x90, &tmp); /* combined mode reg */ | |
1272 | ||
1273 | if (ich == 5) { | |
1274 | tmp &= 0x6; /* interesting bits 2:1, PATA primary/secondary */ | |
1275 | if (tmp == 0x4) /* bits 10x */ | |
1276 | comb = (1 << 0); /* SATA port 0, PATA port 1 */ | |
1277 | else if (tmp == 0x6) /* bits 11x */ | |
1278 | comb = (1 << 2); /* PATA port 0, SATA port 1 */ | |
1279 | else | |
1280 | return; /* not in combined mode */ | |
1281 | } else { | |
1282 | WARN_ON((ich != 6) && (ich != 7)); | |
1283 | tmp &= 0x3; /* interesting bits 1:0 */ | |
1284 | if (tmp & (1 << 0)) | |
1285 | comb = (1 << 2); /* PATA port 0, SATA port 1 */ | |
1286 | else if (tmp & (1 << 1)) | |
1287 | comb = (1 << 0); /* SATA port 0, PATA port 1 */ | |
1288 | else | |
1289 | return; /* not in combined mode */ | |
1290 | } | |
1291 | ||
1292 | /* | |
1293 | * Read programming interface register. | |
1294 | * (Tells us if it's legacy or native mode) | |
1295 | */ | |
1296 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
1297 | ||
1298 | /* if SATA port is in native mode, we're ok. */ | |
1299 | if (prog & comb) | |
1300 | return; | |
1301 | ||
1302 | /* SATA port is in legacy mode. Reserve port so that | |
1303 | * IDE driver does not attempt to use it. If request_region | |
1304 | * fails, it will be obvious at boot time, so we don't bother | |
1305 | * checking return values. | |
1306 | */ | |
1307 | if (comb == (1 << 0)) | |
1308 | request_region(0x1f0, 8, "libata"); /* port 0 */ | |
1309 | else | |
1310 | request_region(0x170, 8, "libata"); /* port 1 */ | |
1311 | } | |
1312 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined ); | |
cc675230 | 1313 | #endif /* CONFIG_SCSI_SATA_INTEL_COMBINED */ |
1da177e4 LT |
1314 | |
1315 | ||
1316 | int pcie_mch_quirk; | |
1317 | ||
1318 | static void __devinit quirk_pcie_mch(struct pci_dev *pdev) | |
1319 | { | |
1320 | pcie_mch_quirk = 1; | |
1321 | } | |
1322 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch ); | |
1323 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch ); | |
1324 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch ); | |
1325 | ||
4602b88d KA |
1326 | |
1327 | /* | |
1328 | * It's possible for the MSI to get corrupted if shpc and acpi | |
1329 | * are used together on certain PXH-based systems. | |
1330 | */ | |
1331 | static void __devinit quirk_pcie_pxh(struct pci_dev *dev) | |
1332 | { | |
1333 | disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), | |
1334 | PCI_CAP_ID_MSI); | |
1335 | dev->no_msi = 1; | |
1336 | ||
1337 | printk(KERN_WARNING "PCI: PXH quirk detected, " | |
1338 | "disabling MSI for SHPC device\n"); | |
1339 | } | |
1340 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); | |
1341 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); | |
1342 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); | |
1343 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); | |
1344 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); | |
1345 | ||
1346 | ||
1da177e4 LT |
1347 | static void __devinit quirk_netmos(struct pci_dev *dev) |
1348 | { | |
1349 | unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; | |
1350 | unsigned int num_serial = dev->subsystem_device & 0xf; | |
1351 | ||
1352 | /* | |
1353 | * These Netmos parts are multiport serial devices with optional | |
1354 | * parallel ports. Even when parallel ports are present, they | |
1355 | * are identified as class SERIAL, which means the serial driver | |
1356 | * will claim them. To prevent this, mark them as class OTHER. | |
1357 | * These combo devices should be claimed by parport_serial. | |
1358 | * | |
1359 | * The subdevice ID is of the form 0x00PS, where <P> is the number | |
1360 | * of parallel ports and <S> is the number of serial ports. | |
1361 | */ | |
1362 | switch (dev->device) { | |
1363 | case PCI_DEVICE_ID_NETMOS_9735: | |
1364 | case PCI_DEVICE_ID_NETMOS_9745: | |
1365 | case PCI_DEVICE_ID_NETMOS_9835: | |
1366 | case PCI_DEVICE_ID_NETMOS_9845: | |
1367 | case PCI_DEVICE_ID_NETMOS_9855: | |
1368 | if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL && | |
1369 | num_parallel) { | |
1370 | printk(KERN_INFO "PCI: Netmos %04x (%u parallel, " | |
1371 | "%u serial); changing class SERIAL to OTHER " | |
1372 | "(use parport_serial)\n", | |
1373 | dev->device, num_parallel, num_serial); | |
1374 | dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | | |
1375 | (dev->class & 0xff); | |
1376 | } | |
1377 | } | |
1378 | } | |
1379 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); | |
1380 | ||
1381 | static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) | |
1382 | { | |
1383 | while (f < end) { | |
1384 | if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) && | |
1385 | (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) { | |
1386 | pr_debug("PCI: Calling quirk %p for %s\n", f->hook, pci_name(dev)); | |
1387 | f->hook(dev); | |
1388 | } | |
1389 | f++; | |
1390 | } | |
1391 | } | |
1392 | ||
1393 | extern struct pci_fixup __start_pci_fixups_early[]; | |
1394 | extern struct pci_fixup __end_pci_fixups_early[]; | |
1395 | extern struct pci_fixup __start_pci_fixups_header[]; | |
1396 | extern struct pci_fixup __end_pci_fixups_header[]; | |
1397 | extern struct pci_fixup __start_pci_fixups_final[]; | |
1398 | extern struct pci_fixup __end_pci_fixups_final[]; | |
1399 | extern struct pci_fixup __start_pci_fixups_enable[]; | |
1400 | extern struct pci_fixup __end_pci_fixups_enable[]; | |
1401 | ||
1402 | ||
1403 | void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) | |
1404 | { | |
1405 | struct pci_fixup *start, *end; | |
1406 | ||
1407 | switch(pass) { | |
1408 | case pci_fixup_early: | |
1409 | start = __start_pci_fixups_early; | |
1410 | end = __end_pci_fixups_early; | |
1411 | break; | |
1412 | ||
1413 | case pci_fixup_header: | |
1414 | start = __start_pci_fixups_header; | |
1415 | end = __end_pci_fixups_header; | |
1416 | break; | |
1417 | ||
1418 | case pci_fixup_final: | |
1419 | start = __start_pci_fixups_final; | |
1420 | end = __end_pci_fixups_final; | |
1421 | break; | |
1422 | ||
1423 | case pci_fixup_enable: | |
1424 | start = __start_pci_fixups_enable; | |
1425 | end = __end_pci_fixups_enable; | |
1426 | break; | |
1427 | ||
1428 | default: | |
1429 | /* stupid compiler warning, you would think with an enum... */ | |
1430 | return; | |
1431 | } | |
1432 | pci_do_fixups(dev, start, end); | |
1433 | } | |
1434 | ||
1435 | EXPORT_SYMBOL(pcie_mch_quirk); | |
1436 | #ifdef CONFIG_HOTPLUG | |
1437 | EXPORT_SYMBOL(pci_fixup_device); | |
1438 | #endif |