projects / linux-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] restore parport_pc probing on powermac
[linux-block.git] / drivers / parport / parport_pc.c
CommitLineData
1da177e4
LT		 1/* Low-level parallel-port routines for 8255-based PC-style hardware.
2 *
3 * Authors: Phil Blundell <philb@gnu.org>
4 * Tim Waugh <tim@cyberelk.demon.co.uk>
5 * Jose Renau <renau@acm.org>
bdca3f20 6 * David Campbell
1da177e4
LT		 7 * Andrea Arcangeli
8 *
9 * based on work by Grant Guenther <grant@torque.net> and Phil Blundell.
10 *
11 * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
12 * DMA support - Bert De Jonghe <bert@sophis.be>
13 * Many ECP bugs fixed. Fred Barnes & Jamie Lokier, 1999
14 * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
15 * Various hacks, Fred Barnes, 04/2001
16 * Updated probing logic - Adam Belay <ambx1@neo.rr.com>
17 */
18
19/* This driver should work with any hardware that is broadly compatible
20 * with that in the IBM PC. This applies to the majority of integrated
21 * I/O chipsets that are commonly available. The expected register
22 * layout is:
23 *
24 * base+0 data
25 * base+1 status
26 * base+2 control
27 *
28 * In addition, there are some optional registers:
29 *
30 * base+3 EPP address
31 * base+4 EPP data
32 * base+0x400 ECP config A
33 * base+0x401 ECP config B
34 * base+0x402 ECP control
35 *
36 * All registers are 8 bits wide and read/write. If your hardware differs
37 * only in register addresses (eg because your registers are on 32-bit
38 * word boundaries) then you can alter the constants in parport_pc.h to
39 * accommodate this.
40 *
41 * Note that the ECP registers may not start at offset 0x400 for PCI cards,
42 * but rather will start at port->base_hi.
43 */
44
1da177e4
LT		 45#include <linux/module.h>
46#include <linux/init.h>
47#include <linux/sched.h>
48#include <linux/delay.h>
49#include <linux/errno.h>
50#include <linux/interrupt.h>
51#include <linux/ioport.h>
52#include <linux/kernel.h>
53#include <linux/slab.h>
54#include <linux/pci.h>
55#include <linux/pnp.h>
56#include <linux/sysctl.h>
57
58#include <asm/io.h>
59#include <asm/dma.h>
60#include <asm/uaccess.h>
61
62#include <linux/parport.h>
63#include <linux/parport_pc.h>
64#include <linux/via.h>
65#include <asm/parport.h>
66
67#define PARPORT_PC_MAX_PORTS PARPORT_MAX
68
7fbacd52
AV		 69#ifdef CONFIG_ISA_DMA_API
70#define HAS_DMA
71#endif
72
1da177e4
LT		 73/* ECR modes */
74#define ECR_SPP 00
75#define ECR_PS2 01
76#define ECR_PPF 02
77#define ECR_ECP 03
78#define ECR_EPP 04
79#define ECR_VND 05
80#define ECR_TST 06
81#define ECR_CNF 07
82#define ECR_MODE_MASK 0xe0
83#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v))
84
85#undef DEBUG
86
87#ifdef DEBUG
88#define DPRINTK printk
89#else
90#define DPRINTK(stuff...)
91#endif
92
93
94#define NR_SUPERIOS 3
95static struct superio_struct { /* For Super-IO chips autodetection */
96 int io;
97 int irq;
98 int dma;
96766a3c 99} superios[NR_SUPERIOS] = { {0,},};
1da177e4
LT		 100
101static int user_specified;
102#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
103 (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
104static int verbose_probing;
105#endif
106static int pci_registered_parport;
107static int pnp_registered_parport;
108
109/* frob_control, but for ECR */
110static void frob_econtrol (struct parport *pb, unsigned char m,
111 unsigned char v)
112{
113 unsigned char ectr = 0;
114
115 if (m != 0xff)
116 ectr = inb (ECONTROL (pb));
117
118 DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
119 m, v, ectr, (ectr & ~m) ^ v);
120
121 outb ((ectr & ~m) ^ v, ECONTROL (pb));
122}
123
124static __inline__ void frob_set_mode (struct parport *p, int mode)
125{
126 frob_econtrol (p, ECR_MODE_MASK, mode << 5);
127}
128
129#ifdef CONFIG_PARPORT_PC_FIFO
130/* Safely change the mode bits in the ECR
131 Returns:
132 0 : Success
133 -EBUSY: Could not drain FIFO in some finite amount of time,
134 mode not changed!
135 */
136static int change_mode(struct parport *p, int m)
137{
138 const struct parport_pc_private *priv = p->physport->private_data;
139 unsigned char oecr;
140 int mode;
141
142 DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m);
143
144 if (!priv->ecr) {
145 printk (KERN_DEBUG "change_mode: but there's no ECR!\n");
146 return 0;
147 }
148
149 /* Bits <7:5> contain the mode. */
150 oecr = inb (ECONTROL (p));
151 mode = (oecr >> 5) & 0x7;
152 if (mode == m) return 0;
153
154 if (mode >= 2 && !(priv->ctr & 0x20)) {
155 /* This mode resets the FIFO, so we may
156 * have to wait for it to drain first. */
157 unsigned long expire = jiffies + p->physport->cad->timeout;
158 int counter;
159 switch (mode) {
160 case ECR_PPF: /* Parallel Port FIFO mode */
161 case ECR_ECP: /* ECP Parallel Port mode */
162 /* Busy wait for 200us */
163 for (counter = 0; counter < 40; counter++) {
164 if (inb (ECONTROL (p)) & 0x01)
165 break;
166 if (signal_pending (current)) break;
167 udelay (5);
168 }
169
170 /* Poll slowly. */
171 while (!(inb (ECONTROL (p)) & 0x01)) {
172 if (time_after_eq (jiffies, expire))
173 /* The FIFO is stuck. */
174 return -EBUSY;
7b4ccf8d 175 schedule_timeout_interruptible(msecs_to_jiffies(10));
1da177e4
LT		 176 if (signal_pending (current))
177 break;
178 }
179 }
180 }
181
182 if (mode >= 2 && m >= 2) {
183 /* We have to go through mode 001 */
184 oecr &= ~(7 << 5);
185 oecr |= ECR_PS2 << 5;
186 ECR_WRITE (p, oecr);
187 }
188
189 /* Set the mode. */
190 oecr &= ~(7 << 5);
191 oecr |= m << 5;
192 ECR_WRITE (p, oecr);
193 return 0;
194}
195
196#ifdef CONFIG_PARPORT_1284
197/* Find FIFO lossage; FIFO is reset */
198#if 0
199static int get_fifo_residue (struct parport *p)
200{
201 int residue;
202 int cnfga;
203 const struct parport_pc_private *priv = p->physport->private_data;
204
205 /* Adjust for the contents of the FIFO. */
206 for (residue = priv->fifo_depth; ; residue--) {
207 if (inb (ECONTROL (p)) & 0x2)
208 /* Full up. */
209 break;
210
211 outb (0, FIFO (p));
212 }
213
214 printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
215 residue);
216
217 /* Reset the FIFO. */
218 frob_set_mode (p, ECR_PS2);
219
220 /* Now change to config mode and clean up. FIXME */
221 frob_set_mode (p, ECR_CNF);
222 cnfga = inb (CONFIGA (p));
223 printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
224
225 if (!(cnfga & (1<<2))) {
226 printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
227 residue++;
228 }
229
230 /* Don't care about partial PWords until support is added for
231 * PWord != 1 byte. */
232
233 /* Back to PS2 mode. */
234 frob_set_mode (p, ECR_PS2);
235
236 DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p)));
237 return residue;
238}
239#endif /* 0 */
240#endif /* IEEE 1284 support */
241#endif /* FIFO support */
242
243/*
244 * Clear TIMEOUT BIT in EPP MODE
245 *
246 * This is also used in SPP detection.
247 */
248static int clear_epp_timeout(struct parport *pb)
249{
250 unsigned char r;
251
252 if (!(parport_pc_read_status(pb) & 0x01))
253 return 1;
254
255 /* To clear timeout some chips require double read */
256 parport_pc_read_status(pb);
257 r = parport_pc_read_status(pb);
258 outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
259 outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
260 r = parport_pc_read_status(pb);
261
262 return !(r & 0x01);
263}
264
265/*
266 * Access functions.
267 *
268 * Most of these aren't static because they may be used by the
269 * parport_xxx_yyy macros. extern __inline__ versions of several
270 * of these are in parport_pc.h.
271 */
272
273static irqreturn_t parport_pc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
274{
275 parport_generic_irq(irq, (struct parport *) dev_id, regs);
276 /* FIXME! Was it really ours? */
277 return IRQ_HANDLED;
278}
279
280static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s)
281{
282 s->u.pc.ctr = 0xc;
283 if (dev->irq_func &&
284 dev->port->irq != PARPORT_IRQ_NONE)
285 /* Set ackIntEn */
286 s->u.pc.ctr |= 0x10;
287
288 s->u.pc.ecr = 0x34; /* NetMos chip can cause problems 0x24;
289 * D.Gruszka VScom */
290}
291
292static void parport_pc_save_state(struct parport *p, struct parport_state *s)
293{
294 const struct parport_pc_private *priv = p->physport->private_data;
295 s->u.pc.ctr = priv->ctr;
296 if (priv->ecr)
297 s->u.pc.ecr = inb (ECONTROL (p));
298}
299
300static void parport_pc_restore_state(struct parport *p, struct parport_state *s)
301{
302 struct parport_pc_private *priv = p->physport->private_data;
303 register unsigned char c = s->u.pc.ctr & priv->ctr_writable;
304 outb (c, CONTROL (p));
305 priv->ctr = c;
306 if (priv->ecr)
307 ECR_WRITE (p, s->u.pc.ecr);
308}
309
310#ifdef CONFIG_PARPORT_1284
311static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
312 size_t length, int flags)
313{
314 size_t got = 0;
315
316 if (flags & PARPORT_W91284PIC) {
317 unsigned char status;
318 size_t left = length;
319
320 /* use knowledge about data lines..:
321 * nFault is 0 if there is at least 1 byte in the Warp's FIFO
322 * pError is 1 if there are 16 bytes in the Warp's FIFO
323 */
324 status = inb (STATUS (port));
325
326 while (!(status & 0x08) && (got < length)) {
327 if ((left >= 16) && (status & 0x20) && !(status & 0x08)) {
328 /* can grab 16 bytes from warp fifo */
329 if (!((long)buf & 0x03)) {
330 insl (EPPDATA (port), buf, 4);
331 } else {
332 insb (EPPDATA (port), buf, 16);
333 }
334 buf += 16;
335 got += 16;
336 left -= 16;
337 } else {
338 /* grab single byte from the warp fifo */
339 *((char *)buf) = inb (EPPDATA (port));
340 buf++;
341 got++;
342 left--;
343 }
344 status = inb (STATUS (port));
345 if (status & 0x01) {
346 /* EPP timeout should never occur... */
347 printk (KERN_DEBUG "%s: EPP timeout occurred while talking to "
348 "w91284pic (should not have done)\n", port->name);
349 clear_epp_timeout (port);
350 }
351 }
352 return got;
353 }
354 if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
355 if (!(((long)buf | length) & 0x03)) {
356 insl (EPPDATA (port), buf, (length >> 2));
357 } else {
358 insb (EPPDATA (port), buf, length);
359 }
360 if (inb (STATUS (port)) & 0x01) {
361 clear_epp_timeout (port);
362 return -EIO;
363 }
364 return length;
365 }
366 for (; got < length; got++) {
367 *((char*)buf) = inb (EPPDATA(port));
368 buf++;
369 if (inb (STATUS (port)) & 0x01) {
370 /* EPP timeout */
371 clear_epp_timeout (port);
372 break;
373 }
374 }
375
376 return got;
377}
378
379static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
380 size_t length, int flags)
381{
382 size_t written = 0;
383
384 if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
385 if (!(((long)buf | length) & 0x03)) {
386 outsl (EPPDATA (port), buf, (length >> 2));
387 } else {
388 outsb (EPPDATA (port), buf, length);
389 }
390 if (inb (STATUS (port)) & 0x01) {
391 clear_epp_timeout (port);
392 return -EIO;
393 }
394 return length;
395 }
396 for (; written < length; written++) {
397 outb (*((char*)buf), EPPDATA(port));
398 buf++;
399 if (inb (STATUS(port)) & 0x01) {
400 clear_epp_timeout (port);
401 break;
402 }
403 }
404
405 return written;
406}
407
408static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
409 size_t length, int flags)
410{
411 size_t got = 0;
412
413 if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
414 insb (EPPADDR (port), buf, length);
415 if (inb (STATUS (port)) & 0x01) {
416 clear_epp_timeout (port);
417 return -EIO;
418 }
419 return length;
420 }
421 for (; got < length; got++) {
422 *((char*)buf) = inb (EPPADDR (port));
423 buf++;
424 if (inb (STATUS (port)) & 0x01) {
425 clear_epp_timeout (port);
426 break;
427 }
428 }
429
430 return got;
431}
432
433static size_t parport_pc_epp_write_addr (struct parport *port,
434 const void *buf, size_t length,
435 int flags)
436{
437 size_t written = 0;
438
439 if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
440 outsb (EPPADDR (port), buf, length);
441 if (inb (STATUS (port)) & 0x01) {
442 clear_epp_timeout (port);
443 return -EIO;
444 }
445 return length;
446 }
447 for (; written < length; written++) {
448 outb (*((char*)buf), EPPADDR (port));
449 buf++;
450 if (inb (STATUS (port)) & 0x01) {
451 clear_epp_timeout (port);
452 break;
453 }
454 }
455
456 return written;
457}
458
459static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf,
460 size_t length, int flags)
461{
462 size_t got;
463
464 frob_set_mode (port, ECR_EPP);
465 parport_pc_data_reverse (port);
466 parport_pc_write_control (port, 0x4);
467 got = parport_pc_epp_read_data (port, buf, length, flags);
468 frob_set_mode (port, ECR_PS2);
469
470 return got;
471}
472
473static size_t parport_pc_ecpepp_write_data (struct parport *port,
474 const void *buf, size_t length,
475 int flags)
476{
477 size_t written;
478
479 frob_set_mode (port, ECR_EPP);
480 parport_pc_write_control (port, 0x4);
481 parport_pc_data_forward (port);
482 written = parport_pc_epp_write_data (port, buf, length, flags);
483 frob_set_mode (port, ECR_PS2);
484
485 return written;
486}
487
488static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf,
489 size_t length, int flags)
490{
491 size_t got;
492
493 frob_set_mode (port, ECR_EPP);
494 parport_pc_data_reverse (port);
495 parport_pc_write_control (port, 0x4);
496 got = parport_pc_epp_read_addr (port, buf, length, flags);
497 frob_set_mode (port, ECR_PS2);
498
499 return got;
500}
501
502static size_t parport_pc_ecpepp_write_addr (struct parport *port,
503 const void *buf, size_t length,
504 int flags)
505{
506 size_t written;
507
508 frob_set_mode (port, ECR_EPP);
509 parport_pc_write_control (port, 0x4);
510 parport_pc_data_forward (port);
511 written = parport_pc_epp_write_addr (port, buf, length, flags);
512 frob_set_mode (port, ECR_PS2);
513
514 return written;
515}
516#endif /* IEEE 1284 support */
517
518#ifdef CONFIG_PARPORT_PC_FIFO
519static size_t parport_pc_fifo_write_block_pio (struct parport *port,
520 const void *buf, size_t length)
521{
522 int ret = 0;
523 const unsigned char *bufp = buf;
524 size_t left = length;
525 unsigned long expire = jiffies + port->physport->cad->timeout;
526 const int fifo = FIFO (port);
527 int poll_for = 8; /* 80 usecs */
528 const struct parport_pc_private *priv = port->physport->private_data;
529 const int fifo_depth = priv->fifo_depth;
530
531 port = port->physport;
532
533 /* We don't want to be interrupted every character. */
534 parport_pc_disable_irq (port);
535 /* set nErrIntrEn and serviceIntr */
536 frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
537
538 /* Forward mode. */
539 parport_pc_data_forward (port); /* Must be in PS2 mode */
540
541 while (left) {
542 unsigned char byte;
543 unsigned char ecrval = inb (ECONTROL (port));
544 int i = 0;
545
546 if (need_resched() && time_before (jiffies, expire))
547 /* Can't yield the port. */
548 schedule ();
549
550 /* Anyone else waiting for the port? */
551 if (port->waithead) {
552 printk (KERN_DEBUG "Somebody wants the port\n");
553 break;
554 }
555
556 if (ecrval & 0x02) {
557 /* FIFO is full. Wait for interrupt. */
558
559 /* Clear serviceIntr */
560 ECR_WRITE (port, ecrval & ~(1<<2));
561 false_alarm:
562 ret = parport_wait_event (port, HZ);
563 if (ret < 0) break;
564 ret = 0;
565 if (!time_before (jiffies, expire)) {
566 /* Timed out. */
567 printk (KERN_DEBUG "FIFO write timed out\n");
568 break;
569 }
570 ecrval = inb (ECONTROL (port));
571 if (!(ecrval & (1<<2))) {
572 if (need_resched() &&
573 time_before (jiffies, expire))
574 schedule ();
575
576 goto false_alarm;
577 }
578
579 continue;
580 }
581
582 /* Can't fail now. */
583 expire = jiffies + port->cad->timeout;
584
585 poll:
586 if (signal_pending (current))
587 break;
588
589 if (ecrval & 0x01) {
590 /* FIFO is empty. Blast it full. */
591 const int n = left < fifo_depth ? left : fifo_depth;
592 outsb (fifo, bufp, n);
593 bufp += n;
594 left -= n;
595
596 /* Adjust the poll time. */
597 if (i < (poll_for - 2)) poll_for--;
598 continue;
599 } else if (i++ < poll_for) {
600 udelay (10);
601 ecrval = inb (ECONTROL (port));
602 goto poll;
603 }
604
605 /* Half-full (call me an optimist) */
606 byte = *bufp++;
607 outb (byte, fifo);
608 left--;
609 }
610
611dump_parport_state ("leave fifo_write_block_pio", port);
612 return length - left;
613}
614
7fbacd52 615#ifdef HAS_DMA
1da177e4
LT		 616static size_t parport_pc_fifo_write_block_dma (struct parport *port,
617 const void *buf, size_t length)
618{
619 int ret = 0;
620 unsigned long dmaflag;
621 size_t left = length;
622 const struct parport_pc_private *priv = port->physport->private_data;
623 dma_addr_t dma_addr, dma_handle;
624 size_t maxlen = 0x10000; /* max 64k per DMA transfer */
625 unsigned long start = (unsigned long) buf;
626 unsigned long end = (unsigned long) buf + length - 1;
627
628dump_parport_state ("enter fifo_write_block_dma", port);
629 if (end < MAX_DMA_ADDRESS) {
630 /* If it would cross a 64k boundary, cap it at the end. */
631 if ((start ^ end) & ~0xffffUL)
632 maxlen = 0x10000 - (start & 0xffff);
633
634 dma_addr = dma_handle = pci_map_single(priv->dev, (void *)buf, length,
635 PCI_DMA_TODEVICE);
636 } else {
637 /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
638 maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */
639 dma_addr = priv->dma_handle;
640 dma_handle = 0;
641 }
642
643 port = port->physport;
644
645 /* We don't want to be interrupted every character. */
646 parport_pc_disable_irq (port);
647 /* set nErrIntrEn and serviceIntr */
648 frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
649
650 /* Forward mode. */
651 parport_pc_data_forward (port); /* Must be in PS2 mode */
652
653 while (left) {
654 unsigned long expire = jiffies + port->physport->cad->timeout;
655
656 size_t count = left;
657
658 if (count > maxlen)
659 count = maxlen;
660
661 if (!dma_handle) /* bounce buffer ! */
662 memcpy(priv->dma_buf, buf, count);
663
664 dmaflag = claim_dma_lock();
665 disable_dma(port->dma);
666 clear_dma_ff(port->dma);
667 set_dma_mode(port->dma, DMA_MODE_WRITE);
668 set_dma_addr(port->dma, dma_addr);
669 set_dma_count(port->dma, count);
670
671 /* Set DMA mode */
672 frob_econtrol (port, 1<<3, 1<<3);
673
674 /* Clear serviceIntr */
675 frob_econtrol (port, 1<<2, 0);
676
677 enable_dma(port->dma);
678 release_dma_lock(dmaflag);
679
680 /* assume DMA will be successful */
681 left -= count;
682 buf += count;
683 if (dma_handle) dma_addr += count;
684
685 /* Wait for interrupt. */
686 false_alarm:
687 ret = parport_wait_event (port, HZ);
688 if (ret < 0) break;
689 ret = 0;
690 if (!time_before (jiffies, expire)) {
691 /* Timed out. */
692 printk (KERN_DEBUG "DMA write timed out\n");
693 break;
694 }
695 /* Is serviceIntr set? */
696 if (!(inb (ECONTROL (port)) & (1<<2))) {
697 cond_resched();
698
699 goto false_alarm;
700 }
701
702 dmaflag = claim_dma_lock();
703 disable_dma(port->dma);
704 clear_dma_ff(port->dma);
705 count = get_dma_residue(port->dma);
706 release_dma_lock(dmaflag);
707
708 cond_resched(); /* Can't yield the port. */
709
710 /* Anyone else waiting for the port? */
711 if (port->waithead) {
712 printk (KERN_DEBUG "Somebody wants the port\n");
713 break;
714 }
715
716 /* update for possible DMA residue ! */
717 buf -= count;
718 left += count;
719 if (dma_handle) dma_addr -= count;
720 }
721
722 /* Maybe got here through break, so adjust for DMA residue! */
723 dmaflag = claim_dma_lock();
724 disable_dma(port->dma);
725 clear_dma_ff(port->dma);
726 left += get_dma_residue(port->dma);
727 release_dma_lock(dmaflag);
728
729 /* Turn off DMA mode */
730 frob_econtrol (port, 1<<3, 0);
731
732 if (dma_handle)
733 pci_unmap_single(priv->dev, dma_handle, length, PCI_DMA_TODEVICE);
734
735dump_parport_state ("leave fifo_write_block_dma", port);
736 return length - left;
737}
7fbacd52
AV		 738#endif
739
740static inline size_t parport_pc_fifo_write_block(struct parport *port,
741 const void *buf, size_t length)
742{
743#ifdef HAS_DMA
744 if (port->dma != PARPORT_DMA_NONE)
745 return parport_pc_fifo_write_block_dma (port, buf, length);
746#endif
747 return parport_pc_fifo_write_block_pio (port, buf, length);
748}
1da177e4
LT		 749
750/* Parallel Port FIFO mode (ECP chipsets) */
751static size_t parport_pc_compat_write_block_pio (struct parport *port,
752 const void *buf, size_t length,
753 int flags)
754{
755 size_t written;
756 int r;
757 unsigned long expire;
758 const struct parport_pc_private *priv = port->physport->private_data;
759
760 /* Special case: a timeout of zero means we cannot call schedule().
761 * Also if O_NONBLOCK is set then use the default implementation. */
762 if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
763 return parport_ieee1284_write_compat (port, buf,
764 length, flags);
765
766 /* Set up parallel port FIFO mode.*/
767 parport_pc_data_forward (port); /* Must be in PS2 mode */
768 parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0);
769 r = change_mode (port, ECR_PPF); /* Parallel port FIFO */
770 if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name);
771
772 port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
773
774 /* Write the data to the FIFO. */
7fbacd52 775 written = parport_pc_fifo_write_block(port, buf, length);
1da177e4
LT		 776
777 /* Finish up. */
778 /* For some hardware we don't want to touch the mode until
779 * the FIFO is empty, so allow 4 seconds for each position
780 * in the fifo.
781 */
782 expire = jiffies + (priv->fifo_depth * HZ * 4);
783 do {
784 /* Wait for the FIFO to empty */
785 r = change_mode (port, ECR_PS2);
786 if (r != -EBUSY) {
787 break;
788 }
789 } while (time_before (jiffies, expire));
790 if (r == -EBUSY) {
791
792 printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
793
794 /* Prevent further data transfer. */
795 frob_set_mode (port, ECR_TST);
796
797 /* Adjust for the contents of the FIFO. */
798 for (written -= priv->fifo_depth; ; written++) {
799 if (inb (ECONTROL (port)) & 0x2) {
800 /* Full up. */
801 break;
802 }
803 outb (0, FIFO (port));
804 }
805
806 /* Reset the FIFO and return to PS2 mode. */
807 frob_set_mode (port, ECR_PS2);
808 }
809
810 r = parport_wait_peripheral (port,
811 PARPORT_STATUS_BUSY,
812 PARPORT_STATUS_BUSY);
813 if (r)
814 printk (KERN_DEBUG
815 "%s: BUSY timeout (%d) in compat_write_block_pio\n",
816 port->name, r);
817
818 port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
819
820 return written;
821}
822
823/* ECP */
824#ifdef CONFIG_PARPORT_1284
825static size_t parport_pc_ecp_write_block_pio (struct parport *port,
826 const void *buf, size_t length,
827 int flags)
828{
829 size_t written;
830 int r;
831 unsigned long expire;
832 const struct parport_pc_private *priv = port->physport->private_data;
833
834 /* Special case: a timeout of zero means we cannot call schedule().
835 * Also if O_NONBLOCK is set then use the default implementation. */
836 if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
837 return parport_ieee1284_ecp_write_data (port, buf,
838 length, flags);
839
840 /* Switch to forward mode if necessary. */
841 if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
842 /* Event 47: Set nInit high. */
843 parport_frob_control (port,
844 PARPORT_CONTROL_INIT
845 | PARPORT_CONTROL_AUTOFD,
846 PARPORT_CONTROL_INIT
847 | PARPORT_CONTROL_AUTOFD);
848
849 /* Event 49: PError goes high. */
850 r = parport_wait_peripheral (port,
851 PARPORT_STATUS_PAPEROUT,
852 PARPORT_STATUS_PAPEROUT);
853 if (r) {
854 printk (KERN_DEBUG "%s: PError timeout (%d) "
855 "in ecp_write_block_pio\n", port->name, r);
856 }
857 }
858
859 /* Set up ECP parallel port mode.*/
860 parport_pc_data_forward (port); /* Must be in PS2 mode */
861 parport_pc_frob_control (port,
862 PARPORT_CONTROL_STROBE |
863 PARPORT_CONTROL_AUTOFD,
864 0);
865 r = change_mode (port, ECR_ECP); /* ECP FIFO */
866 if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
867 port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
868
869 /* Write the data to the FIFO. */
7fbacd52 870 written = parport_pc_fifo_write_block(port, buf, length);
1da177e4
LT		 871
872 /* Finish up. */
873 /* For some hardware we don't want to touch the mode until
874 * the FIFO is empty, so allow 4 seconds for each position
875 * in the fifo.
876 */
877 expire = jiffies + (priv->fifo_depth * (HZ * 4));
878 do {
879 /* Wait for the FIFO to empty */
880 r = change_mode (port, ECR_PS2);
881 if (r != -EBUSY) {
882 break;
883 }
884 } while (time_before (jiffies, expire));
885 if (r == -EBUSY) {
886
887 printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
888
889 /* Prevent further data transfer. */
890 frob_set_mode (port, ECR_TST);
891
892 /* Adjust for the contents of the FIFO. */
893 for (written -= priv->fifo_depth; ; written++) {
894 if (inb (ECONTROL (port)) & 0x2) {
895 /* Full up. */
896 break;
897 }
898 outb (0, FIFO (port));
899 }
900
901 /* Reset the FIFO and return to PS2 mode. */
902 frob_set_mode (port, ECR_PS2);
903
904 /* Host transfer recovery. */
905 parport_pc_data_reverse (port); /* Must be in PS2 mode */
906 udelay (5);
907 parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
908 r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
909 if (r)
910 printk (KERN_DEBUG "%s: PE,1 timeout (%d) "
911 "in ecp_write_block_pio\n", port->name, r);
912
913 parport_frob_control (port,
914 PARPORT_CONTROL_INIT,
915 PARPORT_CONTROL_INIT);
916 r = parport_wait_peripheral (port,
917 PARPORT_STATUS_PAPEROUT,
918 PARPORT_STATUS_PAPEROUT);
919 if (r)
920 printk (KERN_DEBUG "%s: PE,2 timeout (%d) "
921 "in ecp_write_block_pio\n", port->name, r);
922 }
923
924 r = parport_wait_peripheral (port,
925 PARPORT_STATUS_BUSY,
926 PARPORT_STATUS_BUSY);
927 if(r)
928 printk (KERN_DEBUG
929 "%s: BUSY timeout (%d) in ecp_write_block_pio\n",
930 port->name, r);
931
932 port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
933
934 return written;
935}
936
937#if 0
938static size_t parport_pc_ecp_read_block_pio (struct parport *port,
939 void *buf, size_t length,
940 int flags)
941{
942 size_t left = length;
943 size_t fifofull;
944 int r;
945 const int fifo = FIFO(port);
946 const struct parport_pc_private *priv = port->physport->private_data;
947 const int fifo_depth = priv->fifo_depth;
948 char *bufp = buf;
949
950 port = port->physport;
951DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
952dump_parport_state ("enter fcn", port);
953
954 /* Special case: a timeout of zero means we cannot call schedule().
955 * Also if O_NONBLOCK is set then use the default implementation. */
956 if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
957 return parport_ieee1284_ecp_read_data (port, buf,
958 length, flags);
959
960 if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
961 /* If the peripheral is allowed to send RLE compressed
962 * data, it is possible for a byte to expand to 128
963 * bytes in the FIFO. */
964 fifofull = 128;
965 } else {
966 fifofull = fifo_depth;
967 }
968
969 /* If the caller wants less than a full FIFO's worth of data,
970 * go through software emulation. Otherwise we may have to throw
971 * away data. */
972 if (length < fifofull)
973 return parport_ieee1284_ecp_read_data (port, buf,
974 length, flags);
975
976 if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
977 /* change to reverse-idle phase (must be in forward-idle) */
978
979 /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
980 parport_frob_control (port,
981 PARPORT_CONTROL_AUTOFD
982 | PARPORT_CONTROL_STROBE,
983 PARPORT_CONTROL_AUTOFD);
984 parport_pc_data_reverse (port); /* Must be in PS2 mode */
985 udelay (5);
986 /* Event 39: Set nInit low to initiate bus reversal */
987 parport_frob_control (port,
988 PARPORT_CONTROL_INIT,
989 0);
990 /* Event 40: Wait for nAckReverse (PError) to go low */
991 r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
992 if (r) {
993 printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) "
994 "in ecp_read_block_pio\n", port->name, r);
995 return 0;
996 }
997 }
998
999 /* Set up ECP FIFO mode.*/
1000/* parport_pc_frob_control (port,
1001 PARPORT_CONTROL_STROBE |
1002 PARPORT_CONTROL_AUTOFD,
1003 PARPORT_CONTROL_AUTOFD); */
1004 r = change_mode (port, ECR_ECP); /* ECP FIFO */
1005 if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
1006
1007 port->ieee1284.phase = IEEE1284_PH_REV_DATA;
1008
1009 /* the first byte must be collected manually */
1010dump_parport_state ("pre 43", port);
1011 /* Event 43: Wait for nAck to go low */
1012 r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
1013 if (r) {
1014 /* timed out while reading -- no data */
1015 printk (KERN_DEBUG "PIO read timed out (initial byte)\n");
1016 goto out_no_data;
1017 }
1018 /* read byte */
1019 *bufp++ = inb (DATA (port));
1020 left--;
1021dump_parport_state ("43-44", port);
1022 /* Event 44: nAutoFd (HostAck) goes high to acknowledge */
1023 parport_pc_frob_control (port,
1024 PARPORT_CONTROL_AUTOFD,
1025 0);
1026dump_parport_state ("pre 45", port);
1027 /* Event 45: Wait for nAck to go high */
1028/* r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */
1029dump_parport_state ("post 45", port);
1030r = 0;
1031 if (r) {
1032 /* timed out while waiting for peripheral to respond to ack */
1033 printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
1034
1035 /* keep hold of the byte we've got already */
1036 goto out_no_data;
1037 }
1038 /* Event 46: nAutoFd (HostAck) goes low to accept more data */
1039 parport_pc_frob_control (port,
1040 PARPORT_CONTROL_AUTOFD,
1041 PARPORT_CONTROL_AUTOFD);
1042
1043
1044dump_parport_state ("rev idle", port);
1045 /* Do the transfer. */
1046 while (left > fifofull) {
1047 int ret;
1048 unsigned long expire = jiffies + port->cad->timeout;
1049 unsigned char ecrval = inb (ECONTROL (port));
1050
1051 if (need_resched() && time_before (jiffies, expire))
1052 /* Can't yield the port. */
1053 schedule ();
1054
1055 /* At this point, the FIFO may already be full. In
1056 * that case ECP is already holding back the
1057 * peripheral (assuming proper design) with a delayed
1058 * handshake. Work fast to avoid a peripheral
1059 * timeout. */
1060
1061 if (ecrval & 0x01) {
1062 /* FIFO is empty. Wait for interrupt. */
1063dump_parport_state ("FIFO empty", port);
1064
1065 /* Anyone else waiting for the port? */
1066 if (port->waithead) {
1067 printk (KERN_DEBUG "Somebody wants the port\n");
1068 break;
1069 }
1070
1071 /* Clear serviceIntr */
1072 ECR_WRITE (port, ecrval & ~(1<<2));
1073 false_alarm:
1074dump_parport_state ("waiting", port);
1075 ret = parport_wait_event (port, HZ);
1076DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret);
1077 if (ret < 0)
1078 break;
1079 ret = 0;
1080 if (!time_before (jiffies, expire)) {
1081 /* Timed out. */
1082dump_parport_state ("timeout", port);
1083 printk (KERN_DEBUG "PIO read timed out\n");
1084 break;
1085 }
1086 ecrval = inb (ECONTROL (port));
1087 if (!(ecrval & (1<<2))) {
1088 if (need_resched() &&
1089 time_before (jiffies, expire)) {
1090 schedule ();
1091 }
1092 goto false_alarm;
1093 }
1094
1095 /* Depending on how the FIFO threshold was
1096 * set, how long interrupt service took, and
1097 * how fast the peripheral is, we might be
1098 * lucky and have a just filled FIFO. */
1099 continue;
1100 }
1101
1102 if (ecrval & 0x02) {
1103 /* FIFO is full. */
1104dump_parport_state ("FIFO full", port);
1105 insb (fifo, bufp, fifo_depth);
1106 bufp += fifo_depth;
1107 left -= fifo_depth;
1108 continue;
1109 }
1110
1111DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
1112
1113 /* FIFO not filled. We will cycle this loop for a while
1114 * and either the peripheral will fill it faster,
1115 * tripping a fast empty with insb, or we empty it. */
1116 *bufp++ = inb (fifo);
1117 left--;
1118 }
1119
1120 /* scoop up anything left in the FIFO */
1121 while (left && !(inb (ECONTROL (port) & 0x01))) {
1122 *bufp++ = inb (fifo);
1123 left--;
1124 }
1125
1126 port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
1127dump_parport_state ("rev idle2", port);
1128
1129out_no_data:
1130
1131 /* Go to forward idle mode to shut the peripheral up (event 47). */
1132 parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
1133
1134 /* event 49: PError goes high */
1135 r = parport_wait_peripheral (port,
1136 PARPORT_STATUS_PAPEROUT,
1137 PARPORT_STATUS_PAPEROUT);
1138 if (r) {
1139 printk (KERN_DEBUG
1140 "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
1141 port->name, r);
1142 }
1143
1144 port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
1145
1146 /* Finish up. */
1147 {
1148 int lost = get_fifo_residue (port);
1149 if (lost)
1150 /* Shouldn't happen with compliant peripherals. */
1151 printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
1152 port->name, lost);
1153 }
1154
1155dump_parport_state ("fwd idle", port);
1156 return length - left;
1157}
1158#endif /* 0 */
1159#endif /* IEEE 1284 support */
1160#endif /* Allowed to use FIFO/DMA */
1161
1162
1163/*
1164 * ******************************************
1165 * INITIALISATION AND MODULE STUFF BELOW HERE
1166 * ******************************************
1167 */
1168
1169/* GCC is not inlining extern inline function later overwriten to non-inline,
1170 so we use outlined_ variants here. */
a6767b7c 1171static const struct parport_operations parport_pc_ops =
1da177e4
LT		 1172{
1173 .write_data = parport_pc_write_data,
1174 .read_data = parport_pc_read_data,
1175
1176 .write_control = parport_pc_write_control,
1177 .read_control = parport_pc_read_control,
1178 .frob_control = parport_pc_frob_control,
1179
1180 .read_status = parport_pc_read_status,
1181
1182 .enable_irq = parport_pc_enable_irq,
1183 .disable_irq = parport_pc_disable_irq,
1184
1185 .data_forward = parport_pc_data_forward,
1186 .data_reverse = parport_pc_data_reverse,
1187
1188 .init_state = parport_pc_init_state,
1189 .save_state = parport_pc_save_state,
1190 .restore_state = parport_pc_restore_state,
1191
1192 .epp_write_data = parport_ieee1284_epp_write_data,
1193 .epp_read_data = parport_ieee1284_epp_read_data,
1194 .epp_write_addr = parport_ieee1284_epp_write_addr,
1195 .epp_read_addr = parport_ieee1284_epp_read_addr,
1196
1197 .ecp_write_data = parport_ieee1284_ecp_write_data,
1198 .ecp_read_data = parport_ieee1284_ecp_read_data,
1199 .ecp_write_addr = parport_ieee1284_ecp_write_addr,
1200
1201 .compat_write_data = parport_ieee1284_write_compat,
1202 .nibble_read_data = parport_ieee1284_read_nibble,
1203 .byte_read_data = parport_ieee1284_read_byte,
1204
1205 .owner = THIS_MODULE,
1206};
1207
1208#ifdef CONFIG_PARPORT_PC_SUPERIO
1209/* Super-IO chipset detection, Winbond, SMSC */
1210static void __devinit show_parconfig_smsc37c669(int io, int key)
1211{
1212 int cr1,cr4,cra,cr23,cr26,cr27,i=0;
a6767b7c
MK		 1213 static const char *const modes[]={
1214 "SPP and Bidirectional (PS/2)",
1215 "EPP and SPP",
1216 "ECP",
1217 "ECP and EPP" };
1da177e4
LT		 1218
1219 outb(key,io);
1220 outb(key,io);
1221 outb(1,io);
1222 cr1=inb(io+1);
1223 outb(4,io);
1224 cr4=inb(io+1);
1225 outb(0x0a,io);
1226 cra=inb(io+1);
1227 outb(0x23,io);
1228 cr23=inb(io+1);
1229 outb(0x26,io);
1230 cr26=inb(io+1);
1231 outb(0x27,io);
1232 cr27=inb(io+1);
1233 outb(0xaa,io);
1234
1235 if (verbose_probing) {
1236 printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
1237 "A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
1238 cr1,cr4,cra,cr23,cr26,cr27);
1239
1240 /* The documentation calls DMA and IRQ-Lines by letters, so
1241 the board maker can/will wire them
1242 appropriately/randomly... G=reserved H=IDE-irq, */
1243 printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, "
1244 "fifo threshold=%d\n", cr23*4,
1245 (cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-',
1246 (cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f);
1247 printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
1248 (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no");
1249 printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
1250 (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03],
1251 (cr4 & 0x40) ? "1.7" : "1.9");
1252 }
1253
1254 /* Heuristics ! BIOS setup for this mainboard device limits
1255 the choices to standard settings, i.e. io-address and IRQ
1256 are related, however DMA can be 1 or 3, assume DMA_A=DMA1,
1257 DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */
1258 if(cr23*4 >=0x100) { /* if active */
1259 while((superios[i].io!= 0) && (i<NR_SUPERIOS))
1260 i++;
1261 if(i==NR_SUPERIOS)
1262 printk(KERN_INFO "Super-IO: too many chips!\n");
1263 else {
1264 int d;
1265 switch (cr23*4) {
1266 case 0x3bc:
1267 superios[i].io = 0x3bc;
1268 superios[i].irq = 7;
1269 break;
1270 case 0x378:
1271 superios[i].io = 0x378;
1272 superios[i].irq = 7;
1273 break;
1274 case 0x278:
1275 superios[i].io = 0x278;
1276 superios[i].irq = 5;
1277 }
1278 d=(cr26 &0x0f);
1279 if((d==1) || (d==3))
1280 superios[i].dma= d;
1281 else
1282 superios[i].dma= PARPORT_DMA_NONE;
1283 }
1284 }
1285}
1286
1287
1288static void __devinit show_parconfig_winbond(int io, int key)
1289{
1290 int cr30,cr60,cr61,cr70,cr74,crf0,i=0;
a6767b7c 1291 static const char *const modes[] = {
1da177e4
LT		 1292 "Standard (SPP) and Bidirectional(PS/2)", /* 0 */
1293 "EPP-1.9 and SPP",
1294 "ECP",
1295 "ECP and EPP-1.9",
1296 "Standard (SPP)",
1297 "EPP-1.7 and SPP", /* 5 */
1298 "undefined!",
1299 "ECP and EPP-1.7" };
a6767b7c
MK		 1300 static char *const irqtypes[] = {
1301 "pulsed low, high-Z",
1302 "follows nACK" };
1da177e4
LT		 1303
1304 /* The registers are called compatible-PnP because the
1305 register layout is modelled after ISA-PnP, the access
1306 method is just another ... */
1307 outb(key,io);
1308 outb(key,io);
1309 outb(0x07,io); /* Register 7: Select Logical Device */
1310 outb(0x01,io+1); /* LD1 is Parallel Port */
1311 outb(0x30,io);
1312 cr30=inb(io+1);
1313 outb(0x60,io);
1314 cr60=inb(io+1);
1315 outb(0x61,io);
1316 cr61=inb(io+1);
1317 outb(0x70,io);
1318 cr70=inb(io+1);
1319 outb(0x74,io);
1320 cr74=inb(io+1);
1321 outb(0xf0,io);
1322 crf0=inb(io+1);
1323 outb(0xaa,io);
1324
1325 if (verbose_probing) {
1326 printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x "
1327 "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0);
1328 printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
1329 (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f );
1330 if ((cr74 & 0x07) > 3)
1331 printk("dma=none\n");
1332 else
1333 printk("dma=%d\n",cr74 & 0x07);
1334 printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
1335 irqtypes[crf0>>7], (crf0>>3)&0x0f);
1336 printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]);
1337 }
1338
1339 if(cr30 & 0x01) { /* the settings can be interrogated later ... */
1340 while((superios[i].io!= 0) && (i<NR_SUPERIOS))
1341 i++;
1342 if(i==NR_SUPERIOS)
1343 printk(KERN_INFO "Super-IO: too many chips!\n");
1344 else {
1345 superios[i].io = (cr60<<8)|cr61;
1346 superios[i].irq = cr70&0x0f;
1347 superios[i].dma = (((cr74 & 0x07) > 3) ?
1348 PARPORT_DMA_NONE : (cr74 & 0x07));
1349 }
1350 }
1351}
1352
1353static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid)
1354{
1355 const char *type = "unknown";
1356 int id,progif=2;
1357
1358 if (devid == devrev)
1359 /* simple heuristics, we happened to read some
1360 non-winbond register */
1361 return;
1362
1363 id=(devid<<8) | devrev;
1364
1365 /* Values are from public data sheets pdf files, I can just
1366 confirm 83977TF is correct :-) */
1367 if (id == 0x9771) type="83977F/AF";
1368 else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x";
1369 else if (id == 0x9774) type="83977ATF";
1370 else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x";
1371 else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x";
1372 else if ((id & ~0x0f) == 0x5210) type="83627";
1373 else if ((id & ~0x0f) == 0x6010) type="83697HF";
1374 else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;}
1375 else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;}
1376 else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;}
1377 else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;}
1378 else progif=0;
1379
1380 if (verbose_probing)
1381 printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
1382 "devid=%02x devrev=%02x oldid=%02x type=%s\n",
1383 efer, key, devid, devrev, oldid, type);
1384
1385 if (progif == 2)
1386 show_parconfig_winbond(efer,key);
1387}
1388
1389static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
1390{
1391 const char *type = "unknown";
1392 void (*func)(int io, int key);
1393 int id;
1394
1395 if (devid == devrev)
1396 /* simple heuristics, we happened to read some
1397 non-smsc register */
1398 return;
1399
1400 func=NULL;
1401 id=(devid<<8) | devrev;
1402
1403 if (id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;}
1404 else if (id==0x6582) type="37c665IR";
1405 else if (devid==0x65) type="37c665GT";
1406 else if (devid==0x66) type="37c666GT";
1407
1408 if (verbose_probing)
1409 printk(KERN_INFO "SMSC chip at EFER=0x%x "
1410 "key=0x%02x devid=%02x devrev=%02x type=%s\n",
1411 efer, key, devid, devrev, type);
1412
1413 if (func)
1414 func(efer,key);
1415}
1416
1417
1418static void __devinit winbond_check(int io, int key)
1419{
1420 int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
1421
1422 if (!request_region(io, 3, __FUNCTION__))
1423 return;
1424
1425 /* First probe without key */
1426 outb(0x20,io);
1427 x_devid=inb(io+1);
1428 outb(0x21,io);
1429 x_devrev=inb(io+1);
1430 outb(0x09,io);
1431 x_oldid=inb(io+1);
1432
1433 outb(key,io);
1434 outb(key,io); /* Write Magic Sequence to EFER, extended
1435 funtion enable register */
1436 outb(0x20,io); /* Write EFIR, extended function index register */
1437 devid=inb(io+1); /* Read EFDR, extended function data register */
1438 outb(0x21,io);
1439 devrev=inb(io+1);
1440 outb(0x09,io);
1441 oldid=inb(io+1);
1442 outb(0xaa,io); /* Magic Seal */
1443
1444 if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
1445 goto out; /* protection against false positives */
1446
1447 decode_winbond(io,key,devid,devrev,oldid);
1448out:
1449 release_region(io, 3);
1450}
1451
1452static void __devinit winbond_check2(int io,int key)
1453{
1454 int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
1455
1456 if (!request_region(io, 3, __FUNCTION__))
1457 return;
1458
1459 /* First probe without the key */
1460 outb(0x20,io+2);
1461 x_devid=inb(io+2);
1462 outb(0x21,io+1);
1463 x_devrev=inb(io+2);
1464 outb(0x09,io+1);
1465 x_oldid=inb(io+2);
1466
1467 outb(key,io); /* Write Magic Byte to EFER, extended
1468 funtion enable register */
1469 outb(0x20,io+2); /* Write EFIR, extended function index register */
1470 devid=inb(io+2); /* Read EFDR, extended function data register */
1471 outb(0x21,io+1);
1472 devrev=inb(io+2);
1473 outb(0x09,io+1);
1474 oldid=inb(io+2);
1475 outb(0xaa,io); /* Magic Seal */
1476
1477 if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
1478 goto out; /* protection against false positives */
1479
1480 decode_winbond(io,key,devid,devrev,oldid);
1481out:
1482 release_region(io, 3);
1483}
1484
1485static void __devinit smsc_check(int io, int key)
1486{
1487 int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev;
1488
1489 if (!request_region(io, 3, __FUNCTION__))
1490 return;
1491
1492 /* First probe without the key */
1493 outb(0x0d,io);
1494 x_oldid=inb(io+1);
1495 outb(0x0e,io);
1496 x_oldrev=inb(io+1);
1497 outb(0x20,io);
1498 x_id=inb(io+1);
1499 outb(0x21,io);
1500 x_rev=inb(io+1);
1501
1502 outb(key,io);
1503 outb(key,io); /* Write Magic Sequence to EFER, extended
1504 funtion enable register */
1505 outb(0x0d,io); /* Write EFIR, extended function index register */
1506 oldid=inb(io+1); /* Read EFDR, extended function data register */
1507 outb(0x0e,io);
1508 oldrev=inb(io+1);
1509 outb(0x20,io);
1510 id=inb(io+1);
1511 outb(0x21,io);
1512 rev=inb(io+1);
1513 outb(0xaa,io); /* Magic Seal */
1514
1515 if ((x_id == id) && (x_oldrev == oldrev) &&
1516 (x_oldid == oldid) && (x_rev == rev))
1517 goto out; /* protection against false positives */
1518
1519 decode_smsc(io,key,oldid,oldrev);
1520out:
1521 release_region(io, 3);
1522}
1523
1524
1525static void __devinit detect_and_report_winbond (void)
1526{
1527 if (verbose_probing)
1528 printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
1529 winbond_check(0x3f0,0x87);
1530 winbond_check(0x370,0x87);
1531 winbond_check(0x2e ,0x87);
1532 winbond_check(0x4e ,0x87);
1533 winbond_check(0x3f0,0x86);
1534 winbond_check2(0x250,0x88);
1535 winbond_check2(0x250,0x89);
1536}
1537
1538static void __devinit detect_and_report_smsc (void)
1539{
1540 if (verbose_probing)
1541 printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
1542 smsc_check(0x3f0,0x55);
1543 smsc_check(0x370,0x55);
1544 smsc_check(0x3f0,0x44);
1545 smsc_check(0x370,0x44);
1546}
1547#endif /* CONFIG_PARPORT_PC_SUPERIO */
1548
1549static int __devinit get_superio_dma (struct parport *p)
1550{
1551 int i=0;
1552 while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
1553 i++;
1554 if (i!=NR_SUPERIOS)
1555 return superios[i].dma;
1556 return PARPORT_DMA_NONE;
1557}
1558
96766a3c 1559static int get_superio_irq (struct parport *p)
1da177e4
LT		 1560{
1561 int i=0;
1562 while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
1563 i++;
1564 if (i!=NR_SUPERIOS)
1565 return superios[i].irq;
1566 return PARPORT_IRQ_NONE;
1567}
1568
1569
1570/* --- Mode detection ------------------------------------- */
1571
1572/*
1573 * Checks for port existence, all ports support SPP MODE
1574 * Returns:
1575 * 0 : No parallel port at this address
1576 * PARPORT_MODE_PCSPP : SPP port detected
1577 * (if the user specified an ioport himself,
1578 * this shall always be the case!)
1579 *
1580 */
96766a3c 1581static int parport_SPP_supported(struct parport *pb)
1da177e4
LT		 1582{
1583 unsigned char r, w;
1584
1585 /*
1586 * first clear an eventually pending EPP timeout
1587 * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
1588 * that does not even respond to SPP cycles if an EPP
1589 * timeout is pending
1590 */
1591 clear_epp_timeout(pb);
1592
1593 /* Do a simple read-write test to make sure the port exists. */
1594 w = 0xc;
1595 outb (w, CONTROL (pb));
1596
1597 /* Is there a control register that we can read from? Some
1598 * ports don't allow reads, so read_control just returns a
1599 * software copy. Some ports _do_ allow reads, so bypass the
1600 * software copy here. In addition, some bits aren't
1601 * writable. */
1602 r = inb (CONTROL (pb));
1603 if ((r & 0xf) == w) {
1604 w = 0xe;
1605 outb (w, CONTROL (pb));
1606 r = inb (CONTROL (pb));
1607 outb (0xc, CONTROL (pb));
1608 if ((r & 0xf) == w)
1609 return PARPORT_MODE_PCSPP;
1610 }
1611
1612 if (user_specified)
1613 /* That didn't work, but the user thinks there's a
1614 * port here. */
1615 printk (KERN_INFO "parport 0x%lx (WARNING): CTR: "
1616 "wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
1617
1618 /* Try the data register. The data lines aren't tri-stated at
1619 * this stage, so we expect back what we wrote. */
1620 w = 0xaa;
1621 parport_pc_write_data (pb, w);
1622 r = parport_pc_read_data (pb);
1623 if (r == w) {
1624 w = 0x55;
1625 parport_pc_write_data (pb, w);
1626 r = parport_pc_read_data (pb);
1627 if (r == w)
1628 return PARPORT_MODE_PCSPP;
1629 }
1630
1631 if (user_specified) {
1632 /* Didn't work, but the user is convinced this is the
1633 * place. */
1634 printk (KERN_INFO "parport 0x%lx (WARNING): DATA: "
1635 "wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
1636 printk (KERN_INFO "parport 0x%lx: You gave this address, "
1637 "but there is probably no parallel port there!\n",
1638 pb->base);
1639 }
1640
1641 /* It's possible that we can't read the control register or
1642 * the data register. In that case just believe the user. */
1643 if (user_specified)
1644 return PARPORT_MODE_PCSPP;
1645
1646 return 0;
1647}
1648
1649/* Check for ECR
1650 *
1651 * Old style XT ports alias io ports every 0x400, hence accessing ECR
1652 * on these cards actually accesses the CTR.
1653 *
1654 * Modern cards don't do this but reading from ECR will return 0xff
1655 * regardless of what is written here if the card does NOT support
1656 * ECP.
1657 *
1658 * We first check to see if ECR is the same as CTR. If not, the low
1659 * two bits of ECR aren't writable, so we check by writing ECR and
1660 * reading it back to see if it's what we expect.
1661 */
96766a3c 1662static int parport_ECR_present(struct parport *pb)
1da177e4
LT		 1663{
1664 struct parport_pc_private *priv = pb->private_data;
1665 unsigned char r = 0xc;
1666
1667 outb (r, CONTROL (pb));
1668 if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) {
1669 outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */
1670
1671 r = inb (CONTROL (pb));
1672 if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2))
1673 goto no_reg; /* Sure that no ECR register exists */
1674 }
1675
1676 if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1)
1677 goto no_reg;
1678
1679 ECR_WRITE (pb, 0x34);
1680 if (inb (ECONTROL (pb)) != 0x35)
1681 goto no_reg;
1682
1683 priv->ecr = 1;
1684 outb (0xc, CONTROL (pb));
1685
1686 /* Go to mode 000 */
1687 frob_set_mode (pb, ECR_SPP);
1688
1689 return 1;
1690
1691 no_reg:
1692 outb (0xc, CONTROL (pb));
1693 return 0;
1694}
1695
1696#ifdef CONFIG_PARPORT_1284
1697/* Detect PS/2 support.
1698 *
1699 * Bit 5 (0x20) sets the PS/2 data direction; setting this high
1700 * allows us to read data from the data lines. In theory we would get back
1701 * 0xff but any peripheral attached to the port may drag some or all of the
1702 * lines down to zero. So if we get back anything that isn't the contents
1703 * of the data register we deem PS/2 support to be present.
1704 *
1705 * Some SPP ports have "half PS/2" ability - you can't turn off the line
1706 * drivers, but an external peripheral with sufficiently beefy drivers of
1707 * its own can overpower them and assert its own levels onto the bus, from
1708 * where they can then be read back as normal. Ports with this property
1709 * and the right type of device attached are likely to fail the SPP test,
1710 * (as they will appear to have stuck bits) and so the fact that they might
1711 * be misdetected here is rather academic.
1712 */
1713
96766a3c 1714static int parport_PS2_supported(struct parport *pb)
1da177e4
LT		 1715{
1716 int ok = 0;
1717
1718 clear_epp_timeout(pb);
1719
1720 /* try to tri-state the buffer */
1721 parport_pc_data_reverse (pb);
1722
1723 parport_pc_write_data(pb, 0x55);
1724 if (parport_pc_read_data(pb) != 0x55) ok++;
1725
1726 parport_pc_write_data(pb, 0xaa);
1727 if (parport_pc_read_data(pb) != 0xaa) ok++;
1728
1729 /* cancel input mode */
1730 parport_pc_data_forward (pb);
1731
1732 if (ok) {
1733 pb->modes |= PARPORT_MODE_TRISTATE;
1734 } else {
1735 struct parport_pc_private *priv = pb->private_data;
1736 priv->ctr_writable &= ~0x20;
1737 }
1738
1739 return ok;
1740}
1741
1742#ifdef CONFIG_PARPORT_PC_FIFO
1743static int __devinit parport_ECP_supported(struct parport *pb)
1744{
1745 int i;
1746 int config, configb;
1747 int pword;
1748 struct parport_pc_private *priv = pb->private_data;
1749 /* Translate ECP intrLine to ISA irq value */
1750 static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 };
1751
1752 /* If there is no ECR, we have no hope of supporting ECP. */
1753 if (!priv->ecr)
1754 return 0;
1755
1756 /* Find out FIFO depth */
1757 ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
1758 ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */
1759 for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++)
1760 outb (0xaa, FIFO (pb));
1761
1762 /*
1763 * Using LGS chipset it uses ECR register, but
1764 * it doesn't support ECP or FIFO MODE
1765 */
1766 if (i == 1024) {
1767 ECR_WRITE (pb, ECR_SPP << 5);
1768 return 0;
1769 }
1770
1771 priv->fifo_depth = i;
1772 if (verbose_probing)
1773 printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
1774
1775 /* Find out writeIntrThreshold */
1776 frob_econtrol (pb, 1<<2, 1<<2);
1777 frob_econtrol (pb, 1<<2, 0);
1778 for (i = 1; i <= priv->fifo_depth; i++) {
1779 inb (FIFO (pb));
1780 udelay (50);
1781 if (inb (ECONTROL (pb)) & (1<<2))
1782 break;
1783 }
1784
1785 if (i <= priv->fifo_depth) {
1786 if (verbose_probing)
1787 printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
1788 pb->base, i);
1789 } else
1790 /* Number of bytes we know we can write if we get an
1791 interrupt. */
1792 i = 0;
1793
1794 priv->writeIntrThreshold = i;
1795
1796 /* Find out readIntrThreshold */
1797 frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */
1798 parport_pc_data_reverse (pb); /* Must be in PS2 mode */
1799 frob_set_mode (pb, ECR_TST); /* Test FIFO */
1800 frob_econtrol (pb, 1<<2, 1<<2);
1801 frob_econtrol (pb, 1<<2, 0);
1802 for (i = 1; i <= priv->fifo_depth; i++) {
1803 outb (0xaa, FIFO (pb));
1804 if (inb (ECONTROL (pb)) & (1<<2))
1805 break;
1806 }
1807
1808 if (i <= priv->fifo_depth) {
1809 if (verbose_probing)
1810 printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n",
1811 pb->base, i);
1812 } else
1813 /* Number of bytes we can read if we get an interrupt. */
1814 i = 0;
1815
1816 priv->readIntrThreshold = i;
1817
1818 ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
1819 ECR_WRITE (pb, 0xf4); /* Configuration mode */
1820 config = inb (CONFIGA (pb));
1821 pword = (config >> 4) & 0x7;
1822 switch (pword) {
1823 case 0:
1824 pword = 2;
1825 printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
1826 pb->base);
1827 break;
1828 case 2:
1829 pword = 4;
1830 printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
1831 pb->base);
1832 break;
1833 default:
1834 printk (KERN_WARNING "0x%lx: Unknown implementation ID\n",
1835 pb->base);
1836 /* Assume 1 */
1837 case 1:
1838 pword = 1;
1839 }
1840 priv->pword = pword;
1841
1842 if (verbose_probing) {
1843 printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword);
1844
1845 printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
1846 config & 0x80 ? "Level" : "Pulses");
1847
1848 configb = inb (CONFIGB (pb));
1849 printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
1850 pb->base, config, configb);
1851 printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
1852 if ((configb >>3) & 0x07)
1853 printk("%d",intrline[(configb >>3) & 0x07]);
1854 else
1855 printk("<none or set by other means>");
1856 printk (" dma=");
1857 if( (configb & 0x03 ) == 0x00)
1858 printk("<none or set by other means>\n");
1859 else
1860 printk("%d\n",configb & 0x07);
1861 }
1862
1863 /* Go back to mode 000 */
1864 frob_set_mode (pb, ECR_SPP);
1865
1866 return 1;
1867}
1868#endif
1869
96766a3c 1870static int parport_ECPPS2_supported(struct parport *pb)
1da177e4
LT		 1871{
1872 const struct parport_pc_private *priv = pb->private_data;
1873 int result;
1874 unsigned char oecr;
1875
1876 if (!priv->ecr)
1877 return 0;
1878
1879 oecr = inb (ECONTROL (pb));
1880 ECR_WRITE (pb, ECR_PS2 << 5);
1881 result = parport_PS2_supported(pb);
1882 ECR_WRITE (pb, oecr);
1883 return result;
1884}
1885
1886/* EPP mode detection */
1887
96766a3c 1888static int parport_EPP_supported(struct parport *pb)
1da177e4
LT		 1889{
1890 const struct parport_pc_private *priv = pb->private_data;
1891
1892 /*
1893 * Theory:
1894 * Bit 0 of STR is the EPP timeout bit, this bit is 0
1895 * when EPP is possible and is set high when an EPP timeout
1896 * occurs (EPP uses the HALT line to stop the CPU while it does
1897 * the byte transfer, an EPP timeout occurs if the attached
1898 * device fails to respond after 10 micro seconds).
1899 *
1900 * This bit is cleared by either reading it (National Semi)
1901 * or writing a 1 to the bit (SMC, UMC, WinBond), others ???
1902 * This bit is always high in non EPP modes.
1903 */
1904
1905 /* If EPP timeout bit clear then EPP available */
1906 if (!clear_epp_timeout(pb)) {
1907 return 0; /* No way to clear timeout */
1908 }
1909
1910 /* Check for Intel bug. */
1911 if (priv->ecr) {
1912 unsigned char i;
1913 for (i = 0x00; i < 0x80; i += 0x20) {
1914 ECR_WRITE (pb, i);
1915 if (clear_epp_timeout (pb)) {
1916 /* Phony EPP in ECP. */
1917 return 0;
1918 }
1919 }
1920 }
1921
1922 pb->modes |= PARPORT_MODE_EPP;
1923
1924 /* Set up access functions to use EPP hardware. */
1925 pb->ops->epp_read_data = parport_pc_epp_read_data;
1926 pb->ops->epp_write_data = parport_pc_epp_write_data;
1927 pb->ops->epp_read_addr = parport_pc_epp_read_addr;
1928 pb->ops->epp_write_addr = parport_pc_epp_write_addr;
1929
1930 return 1;
1931}
1932
96766a3c 1933static int parport_ECPEPP_supported(struct parport *pb)
1da177e4
LT		 1934{
1935 struct parport_pc_private *priv = pb->private_data;
1936 int result;
1937 unsigned char oecr;
1938
1939 if (!priv->ecr) {
1940 return 0;
1941 }
1942
1943 oecr = inb (ECONTROL (pb));
1944 /* Search for SMC style EPP+ECP mode */
1945 ECR_WRITE (pb, 0x80);
1946 outb (0x04, CONTROL (pb));
1947 result = parport_EPP_supported(pb);
1948
1949 ECR_WRITE (pb, oecr);
1950
1951 if (result) {
1952 /* Set up access functions to use ECP+EPP hardware. */
1953 pb->ops->epp_read_data = parport_pc_ecpepp_read_data;
1954 pb->ops->epp_write_data = parport_pc_ecpepp_write_data;
1955 pb->ops->epp_read_addr = parport_pc_ecpepp_read_addr;
1956 pb->ops->epp_write_addr = parport_pc_ecpepp_write_addr;
1957 }
1958
1959 return result;
1960}
1961
1962#else /* No IEEE 1284 support */
1963
1964/* Don't bother probing for modes we know we won't use. */
1965static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
1966#ifdef CONFIG_PARPORT_PC_FIFO
1967static int __devinit parport_ECP_supported(struct parport *pb) { return 0; }
1968#endif
1969static int __devinit parport_EPP_supported(struct parport *pb) { return 0; }
1970static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;}
1971static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
1972
1973#endif /* No IEEE 1284 support */
1974
1975/* --- IRQ detection -------------------------------------- */
1976
1977/* Only if supports ECP mode */
1978static int __devinit programmable_irq_support(struct parport *pb)
1979{
1980 int irq, intrLine;
1981 unsigned char oecr = inb (ECONTROL (pb));
1982 static const int lookup[8] = {
1983 PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5
1984 };
1985
1986 ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
1987
1988 intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
1989 irq = lookup[intrLine];
1990
1991 ECR_WRITE (pb, oecr);
1992 return irq;
1993}
1994
1995static int __devinit irq_probe_ECP(struct parport *pb)
1996{
1997 int i;
1998 unsigned long irqs;
1999
2000 irqs = probe_irq_on();
2001
2002 ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
2003 ECR_WRITE (pb, (ECR_TST << 5) | 0x04);
2004 ECR_WRITE (pb, ECR_TST << 5);
2005
2006 /* If Full FIFO sure that writeIntrThreshold is generated */
2007 for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++)
2008 outb (0xaa, FIFO (pb));
2009
2010 pb->irq = probe_irq_off(irqs);
2011 ECR_WRITE (pb, ECR_SPP << 5);
2012
2013 if (pb->irq <= 0)
2014 pb->irq = PARPORT_IRQ_NONE;
2015
2016 return pb->irq;
2017}
2018
2019/*
2020 * This detection seems that only works in National Semiconductors
2021 * This doesn't work in SMC, LGS, and Winbond
2022 */
2023static int __devinit irq_probe_EPP(struct parport *pb)
2024{
2025#ifndef ADVANCED_DETECT
2026 return PARPORT_IRQ_NONE;
2027#else
2028 int irqs;
2029 unsigned char oecr;
2030
2031 if (pb->modes & PARPORT_MODE_PCECR)
2032 oecr = inb (ECONTROL (pb));
2033
2034 irqs = probe_irq_on();
2035
2036 if (pb->modes & PARPORT_MODE_PCECR)
2037 frob_econtrol (pb, 0x10, 0x10);
2038
2039 clear_epp_timeout(pb);
2040 parport_pc_frob_control (pb, 0x20, 0x20);
2041 parport_pc_frob_control (pb, 0x10, 0x10);
2042 clear_epp_timeout(pb);
2043
2044 /* Device isn't expecting an EPP read
2045 * and generates an IRQ.
2046 */
2047 parport_pc_read_epp(pb);
2048 udelay(20);
2049
2050 pb->irq = probe_irq_off (irqs);
2051 if (pb->modes & PARPORT_MODE_PCECR)
2052 ECR_WRITE (pb, oecr);
2053 parport_pc_write_control(pb, 0xc);
2054
2055 if (pb->irq <= 0)
2056 pb->irq = PARPORT_IRQ_NONE;
2057
2058 return pb->irq;
2059#endif /* Advanced detection */
2060}
2061
2062static int __devinit irq_probe_SPP(struct parport *pb)
2063{
2064 /* Don't even try to do this. */
2065 return PARPORT_IRQ_NONE;
2066}
2067
2068/* We will attempt to share interrupt requests since other devices
2069 * such as sound cards and network cards seem to like using the
2070 * printer IRQs.
2071 *
2072 * When ECP is available we can autoprobe for IRQs.
2073 * NOTE: If we can autoprobe it, we can register the IRQ.
2074 */
96766a3c 2075static int parport_irq_probe(struct parport *pb)
1da177e4
LT		 2076{
2077 struct parport_pc_private *priv = pb->private_data;
2078
2079 if (priv->ecr) {
2080 pb->irq = programmable_irq_support(pb);
2081
2082 if (pb->irq == PARPORT_IRQ_NONE)
2083 pb->irq = irq_probe_ECP(pb);
2084 }
2085
2086 if ((pb->irq == PARPORT_IRQ_NONE) && priv->ecr &&
2087 (pb->modes & PARPORT_MODE_EPP))
2088 pb->irq = irq_probe_EPP(pb);
2089
2090 clear_epp_timeout(pb);
2091
2092 if (pb->irq == PARPORT_IRQ_NONE && (pb->modes & PARPORT_MODE_EPP))
2093 pb->irq = irq_probe_EPP(pb);
2094
2095 clear_epp_timeout(pb);
2096
2097 if (pb->irq == PARPORT_IRQ_NONE)
2098 pb->irq = irq_probe_SPP(pb);
2099
2100 if (pb->irq == PARPORT_IRQ_NONE)
2101 pb->irq = get_superio_irq(pb);
2102
2103 return pb->irq;
2104}
2105
2106/* --- DMA detection -------------------------------------- */
2107
2108/* Only if chipset conforms to ECP ISA Interface Standard */
2109static int __devinit programmable_dma_support (struct parport *p)
2110{
2111 unsigned char oecr = inb (ECONTROL (p));
2112 int dma;
2113
2114 frob_set_mode (p, ECR_CNF);
2115
2116 dma = inb (CONFIGB(p)) & 0x07;
2117 /* 000: Indicates jumpered 8-bit DMA if read-only.
2118 100: Indicates jumpered 16-bit DMA if read-only. */
2119 if ((dma & 0x03) == 0)
2120 dma = PARPORT_DMA_NONE;
2121
2122 ECR_WRITE (p, oecr);
2123 return dma;
2124}
2125
2126static int __devinit parport_dma_probe (struct parport *p)
2127{
2128 const struct parport_pc_private *priv = p->private_data;
2129 if (priv->ecr)
2130 p->dma = programmable_dma_support(p); /* ask ECP chipset first */
2131 if (p->dma == PARPORT_DMA_NONE) {
2132 /* ask known Super-IO chips proper, although these
2133 claim ECP compatible, some don't report their DMA
2134 conforming to ECP standards */
2135 p->dma = get_superio_dma(p);
2136 }
2137
2138 return p->dma;
2139}
2140
2141/* --- Initialisation code -------------------------------- */
2142
2143static LIST_HEAD(ports_list);
2144static DEFINE_SPINLOCK(ports_lock);
2145
2146struct parport *parport_pc_probe_port (unsigned long int base,
2147 unsigned long int base_hi,
2148 int irq, int dma,
2149 struct pci_dev *dev)
2150{
2151 struct parport_pc_private *priv;
2152 struct parport_operations *ops;
2153 struct parport *p;
2154 int probedirq = PARPORT_IRQ_NONE;
2155 struct resource *base_res;
2156 struct resource *ECR_res = NULL;
2157 struct resource *EPP_res = NULL;
2158
2159 ops = kmalloc(sizeof (struct parport_operations), GFP_KERNEL);
2160 if (!ops)
2161 goto out1;
2162
2163 priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
2164 if (!priv)
2165 goto out2;
2166
2167 /* a misnomer, actually - it's allocate and reserve parport number */
2168 p = parport_register_port(base, irq, dma, ops);
2169 if (!p)
2170 goto out3;
2171
2172 base_res = request_region(base, 3, p->name);
2173 if (!base_res)
2174 goto out4;
2175
2176 memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations));
2177 priv->ctr = 0xc;
2178 priv->ctr_writable = ~0x10;
2179 priv->ecr = 0;
2180 priv->fifo_depth = 0;
2181 priv->dma_buf = NULL;
2182 priv->dma_handle = 0;
2183 priv->dev = dev;
2184 INIT_LIST_HEAD(&priv->list);
2185 priv->port = p;
2186 p->base_hi = base_hi;
2187 p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
2188 p->private_data = priv;
2189
2190 if (base_hi) {
2191 ECR_res = request_region(base_hi, 3, p->name);
2192 if (ECR_res)
2193 parport_ECR_present(p);
2194 }
2195
2196 if (base != 0x3bc) {
2197 EPP_res = request_region(base+0x3, 5, p->name);
2198 if (EPP_res)
2199 if (!parport_EPP_supported(p))
2200 parport_ECPEPP_supported(p);
2201 }
2202 if (!parport_SPP_supported (p))
2203 /* No port. */
2204 goto out5;
2205 if (priv->ecr)
2206 parport_ECPPS2_supported(p);
2207 else
2208 parport_PS2_supported(p);
2209
2210 p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
2211
2212 printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
2213 if (p->base_hi && priv->ecr)
2214 printk(" (0x%lx)", p->base_hi);
2215 if (p->irq == PARPORT_IRQ_AUTO) {
2216 p->irq = PARPORT_IRQ_NONE;
2217 parport_irq_probe(p);
2218 } else if (p->irq == PARPORT_IRQ_PROBEONLY) {
2219 p->irq = PARPORT_IRQ_NONE;
2220 parport_irq_probe(p);
2221 probedirq = p->irq;
2222 p->irq = PARPORT_IRQ_NONE;
2223 }
2224 if (p->irq != PARPORT_IRQ_NONE) {
2225 printk(", irq %d", p->irq);
2226 priv->ctr_writable |= 0x10;
2227
2228 if (p->dma == PARPORT_DMA_AUTO) {
2229 p->dma = PARPORT_DMA_NONE;
2230 parport_dma_probe(p);
2231 }
2232 }
2233 if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
2234 is mandatory (see above) */
2235 p->dma = PARPORT_DMA_NONE;
2236
2237#ifdef CONFIG_PARPORT_PC_FIFO
2238 if (parport_ECP_supported(p) &&
2239 p->dma != PARPORT_DMA_NOFIFO &&
2240 priv->fifo_depth > 0 && p->irq != PARPORT_IRQ_NONE) {
2241 p->modes |= PARPORT_MODE_ECP | PARPORT_MODE_COMPAT;
2242 p->ops->compat_write_data = parport_pc_compat_write_block_pio;
2243#ifdef CONFIG_PARPORT_1284
2244 p->ops->ecp_write_data = parport_pc_ecp_write_block_pio;
2245 /* currently broken, but working on it.. (FB) */
2246 /* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
2247#endif /* IEEE 1284 support */
2248 if (p->dma != PARPORT_DMA_NONE) {
2249 printk(", dma %d", p->dma);
2250 p->modes |= PARPORT_MODE_DMA;
2251 }
2252 else printk(", using FIFO");
2253 }
2254 else
2255 /* We can't use the DMA channel after all. */
2256 p->dma = PARPORT_DMA_NONE;
2257#endif /* Allowed to use FIFO/DMA */
2258
2259 printk(" [");
2260#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
2261 {
2262 int f = 0;
2263 printmode(PCSPP);
2264 printmode(TRISTATE);
2265 printmode(COMPAT)
2266 printmode(EPP);
2267 printmode(ECP);
2268 printmode(DMA);
2269 }
2270#undef printmode
2271#ifndef CONFIG_PARPORT_1284
2272 printk ("(,...)");
2273#endif /* CONFIG_PARPORT_1284 */
2274 printk("]\n");
2275 if (probedirq != PARPORT_IRQ_NONE)
2276 printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
2277
2278 /* If No ECP release the ports grabbed above. */
2279 if (ECR_res && (p->modes & PARPORT_MODE_ECP) == 0) {
2280 release_region(base_hi, 3);
2281 ECR_res = NULL;
2282 }
2283 /* Likewise for EEP ports */
2284 if (EPP_res && (p->modes & PARPORT_MODE_EPP) == 0) {
2285 release_region(base+3, 5);
2286 EPP_res = NULL;
2287 }
2288 if (p->irq != PARPORT_IRQ_NONE) {
2289 if (request_irq (p->irq, parport_pc_interrupt,
2290 0, p->name, p)) {
2291 printk (KERN_WARNING "%s: irq %d in use, "
2292 "resorting to polled operation\n",
2293 p->name, p->irq);
2294 p->irq = PARPORT_IRQ_NONE;
2295 p->dma = PARPORT_DMA_NONE;
2296 }
2297
2298#ifdef CONFIG_PARPORT_PC_FIFO
7fbacd52 2299#ifdef HAS_DMA
1da177e4
LT		 2300 if (p->dma != PARPORT_DMA_NONE) {
2301 if (request_dma (p->dma, p->name)) {
2302 printk (KERN_WARNING "%s: dma %d in use, "
2303 "resorting to PIO operation\n",
2304 p->name, p->dma);
2305 p->dma = PARPORT_DMA_NONE;
2306 } else {
2307 priv->dma_buf =
2308 pci_alloc_consistent(priv->dev,
2309 PAGE_SIZE,
2310 &priv->dma_handle);
2311 if (! priv->dma_buf) {
2312 printk (KERN_WARNING "%s: "
2313 "cannot get buffer for DMA, "
2314 "resorting to PIO operation\n",
2315 p->name);
2316 free_dma(p->dma);
2317 p->dma = PARPORT_DMA_NONE;
2318 }
2319 }
2320 }
7fbacd52
AV		 2321#endif
2322#endif
1da177e4
LT		 2323 }
2324
2325 /* Done probing. Now put the port into a sensible start-up state. */
2326 if (priv->ecr)
2327 /*
2328 * Put the ECP detected port in PS2 mode.
2329 * Do this also for ports that have ECR but don't do ECP.
2330 */
2331 ECR_WRITE (p, 0x34);
2332
2333 parport_pc_write_data(p, 0);
2334 parport_pc_data_forward (p);
2335
2336 /* Now that we've told the sharing engine about the port, and
2337 found out its characteristics, let the high-level drivers
2338 know about it. */
2339 spin_lock(&ports_lock);
2340 list_add(&priv->list, &ports_list);
2341 spin_unlock(&ports_lock);
2342 parport_announce_port (p);
2343
2344 return p;
2345
2346out5:
2347 if (ECR_res)
2348 release_region(base_hi, 3);
2349 if (EPP_res)
2350 release_region(base+0x3, 5);
2351 release_region(base, 3);
2352out4:
2353 parport_put_port(p);
2354out3:
2355 kfree (priv);
2356out2:
2357 kfree (ops);
2358out1:
2359 return NULL;
2360}
2361
2362EXPORT_SYMBOL (parport_pc_probe_port);
2363
2364void parport_pc_unregister_port (struct parport *p)
2365{
2366 struct parport_pc_private *priv = p->private_data;
2367 struct parport_operations *ops = p->ops;
2368
2369 parport_remove_port(p);
2370 spin_lock(&ports_lock);
2371 list_del_init(&priv->list);
2372 spin_unlock(&ports_lock);
d1c4ac40 2373#if defined(CONFIG_PARPORT_PC_FIFO) && defined(HAS_DMA)
1da177e4
LT		 2374 if (p->dma != PARPORT_DMA_NONE)
2375 free_dma(p->dma);
d1c4ac40 2376#endif
1da177e4
LT		 2377 if (p->irq != PARPORT_IRQ_NONE)
2378 free_irq(p->irq, p);
2379 release_region(p->base, 3);
2380 if (p->size > 3)
2381 release_region(p->base + 3, p->size - 3);
2382 if (p->modes & PARPORT_MODE_ECP)
2383 release_region(p->base_hi, 3);
d1c4ac40 2384#if defined(CONFIG_PARPORT_PC_FIFO) && defined(HAS_DMA)
1da177e4
LT		 2385 if (priv->dma_buf)
2386 pci_free_consistent(priv->dev, PAGE_SIZE,
2387 priv->dma_buf,
2388 priv->dma_handle);
7fbacd52 2389#endif
1da177e4
LT		 2390 kfree (p->private_data);
2391 parport_put_port(p);
2392 kfree (ops); /* hope no-one cached it */
2393}
2394
2395EXPORT_SYMBOL (parport_pc_unregister_port);
2396
2397#ifdef CONFIG_PCI
2398
2399/* ITE support maintained by Rich Liu <richliu@poorman.org> */
2400static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
a6767b7c
MK		 2401 int autodma,
2402 const struct parport_pc_via_data *via)
1da177e4
LT		 2403{
2404 short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
2405 struct resource *base_res;
2406 u32 ite8872set;
2407 u32 ite8872_lpt, ite8872_lpthi;
2408 u8 ite8872_irq, type;
2409 char *fake_name = "parport probe";
2410 int irq;
2411 int i;
2412
2413 DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n");
2414
2415 // make sure which one chip
2416 for(i = 0; i < 5; i++) {
2417 base_res = request_region(inta_addr[i], 0x8, fake_name);
2418 if (base_res) {
2419 int test;
2420 pci_write_config_dword (pdev, 0x60,
2421 0xe7000000 | inta_addr[i]);
2422 pci_write_config_dword (pdev, 0x78,
2423 0x00000000 | inta_addr[i]);
2424 test = inb (inta_addr[i]);
2425 if (test != 0xff) break;
2426 release_region(inta_addr[i], 0x8);
2427 }
2428 }
2429 if(i >= 5) {
2430 printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
2431 return 0;
2432 }
2433
2434 type = inb (inta_addr[i] + 0x18);
2435 type &= 0x0f;
2436
2437 switch (type) {
2438 case 0x2:
2439 printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n");
2440 ite8872set = 0x64200000;
2441 break;
2442 case 0xa:
2443 printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n");
2444 ite8872set = 0x64200000;
2445 break;
2446 case 0xe:
2447 printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
2448 ite8872set = 0x64e00000;
2449 break;
2450 case 0x6:
2451 printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n");
2452 return 0;
2453 case 0x8:
2454 DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
2455 return 0;
2456 default:
2457 printk (KERN_INFO "parport_pc: unknown ITE887x\n");
2458 printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' "
2459 "output to Rich.Liu@ite.com.tw\n");
2460 return 0;
2461 }
2462
2463 pci_read_config_byte (pdev, 0x3c, &ite8872_irq);
2464 pci_read_config_dword (pdev, 0x1c, &ite8872_lpt);
2465 ite8872_lpt &= 0x0000ff00;
2466 pci_read_config_dword (pdev, 0x20, &ite8872_lpthi);
2467 ite8872_lpthi &= 0x0000ff00;
2468 pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt);
2469 pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi);
2470 pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
2471 // SET SPP&EPP , Parallel Port NO DMA , Enable All Function
2472 // SET Parallel IRQ
2473 pci_write_config_dword (pdev, 0x9c,
2474 ite8872set | (ite8872_irq * 0x11111));
2475
2476 DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
2477 DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
2478 ite8872_lpt);
2479 DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
2480 ite8872_lpthi);
2481
2482 /* Let the user (or defaults) steer us away from interrupts */
2483 irq = ite8872_irq;
2484 if (autoirq != PARPORT_IRQ_AUTO)
2485 irq = PARPORT_IRQ_NONE;
2486
2487 /*
2488 * Release the resource so that parport_pc_probe_port can get it.
2489 */
2490 release_resource(base_res);
2491 if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
2492 irq, PARPORT_DMA_NONE, NULL)) {
2493 printk (KERN_INFO
2494 "parport_pc: ITE 8872 parallel port: io=0x%X",
2495 ite8872_lpt);
2496 if (irq != PARPORT_IRQ_NONE)
2497 printk (", irq=%d", irq);
2498 printk ("\n");
2499 return 1;
2500 }
2501
2502 return 0;
2503}
2504
2505/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
2506 based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
2507static int __devinitdata parport_init_mode = 0;
2508
2509/* Data for two known VIA chips */
2510static struct parport_pc_via_data via_686a_data __devinitdata = {
2511 0x51,
2512 0x50,
2513 0x85,
2514 0x02,
2515 0xE2,
2516 0xF0,
2517 0xE6
2518};
2519static struct parport_pc_via_data via_8231_data __devinitdata = {
2520 0x45,
2521 0x44,
2522 0x50,
2523 0x04,
2524 0xF2,
2525 0xFA,
2526 0xF6
2527};
2528
2529static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
a6767b7c
MK		 2530 int autodma,
2531 const struct parport_pc_via_data *via)
1da177e4
LT		 2532{
2533 u8 tmp, tmp2, siofunc;
2534 u8 ppcontrol = 0;
2535 int dma, irq;
2536 unsigned port1, port2;
2537 unsigned have_epp = 0;
2538
2539 printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
2540
2541 switch(parport_init_mode)
2542 {
2543 case 1:
2544 printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
2545 siofunc = VIA_FUNCTION_PARPORT_SPP;
2546 break;
2547 case 2:
2548 printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
2549 siofunc = VIA_FUNCTION_PARPORT_SPP;
2550 ppcontrol = VIA_PARPORT_BIDIR;
2551 break;
2552 case 3:
2553 printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
2554 siofunc = VIA_FUNCTION_PARPORT_EPP;
2555 ppcontrol = VIA_PARPORT_BIDIR;
2556 have_epp = 1;
2557 break;
2558 case 4:
2559 printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
2560 siofunc = VIA_FUNCTION_PARPORT_ECP;
2561 ppcontrol = VIA_PARPORT_BIDIR;
2562 break;
2563 case 5:
2564 printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
2565 siofunc = VIA_FUNCTION_PARPORT_ECP;
2566 ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
2567 have_epp = 1;
2568 break;
2569 default:
2570 printk(KERN_DEBUG "parport_pc: probing current configuration\n");
2571 siofunc = VIA_FUNCTION_PROBE;
2572 break;
2573 }
2574 /*
2575 * unlock super i/o configuration
2576 */
2577 pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
2578 tmp |= via->via_pci_superio_config_data;
2579 pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
2580
2581 /* Bits 1-0: Parallel Port Mode / Enable */
2582 outb(via->viacfg_function, VIA_CONFIG_INDEX);
2583 tmp = inb (VIA_CONFIG_DATA);
2584 /* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
2585 outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
2586 tmp2 = inb (VIA_CONFIG_DATA);
2587 if (siofunc == VIA_FUNCTION_PROBE)
2588 {
2589 siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
2590 ppcontrol = tmp2;
2591 }
2592 else
2593 {
2594 tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
2595 tmp |= siofunc;
2596 outb(via->viacfg_function, VIA_CONFIG_INDEX);
2597 outb(tmp, VIA_CONFIG_DATA);
2598 tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
2599 tmp2 |= ppcontrol;
2600 outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
2601 outb(tmp2, VIA_CONFIG_DATA);
2602 }
2603
2604 /* Parallel Port I/O Base Address, bits 9-2 */
2605 outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
2606 port1 = inb(VIA_CONFIG_DATA) << 2;
2607
2608 printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1);
2609 if ((port1 == 0x3BC) && have_epp)
2610 {
2611 outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
2612 outb((0x378 >> 2), VIA_CONFIG_DATA);
2613 printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
2614 port1 = 0x378;
2615 }
2616
2617 /*
2618 * lock super i/o configuration
2619 */
2620 pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
2621 tmp &= ~via->via_pci_superio_config_data;
2622 pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
2623
2624 if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) {
2625 printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
2626 return 0;
2627 }
2628
2629 /* Bits 7-4: PnP Routing for Parallel Port IRQ */
2630 pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
2631 irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
2632
2633 if (siofunc == VIA_FUNCTION_PARPORT_ECP)
2634 {
2635 /* Bits 3-2: PnP Routing for Parallel Port DMA */
2636 pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
2637 dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
2638 }
2639 else
2640 /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
2641 dma = PARPORT_DMA_NONE;
2642
2643 /* Let the user (or defaults) steer us away from interrupts and DMA */
2644 if (autoirq == PARPORT_IRQ_NONE) {
2645 irq = PARPORT_IRQ_NONE;
2646 dma = PARPORT_DMA_NONE;
2647 }
2648 if (autodma == PARPORT_DMA_NONE)
2649 dma = PARPORT_DMA_NONE;
2650
2651 switch (port1) {
2652 case 0x3bc: port2 = 0x7bc; break;
2653 case 0x378: port2 = 0x778; break;
2654 case 0x278: port2 = 0x678; break;
2655 default:
2656 printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
2657 port1);
2658 return 0;
2659 }
2660
2661 /* filter bogus IRQs */
2662 switch (irq) {
2663 case 0:
2664 case 2:
2665 case 8:
2666 case 13:
2667 irq = PARPORT_IRQ_NONE;
2668 break;
2669
2670 default: /* do nothing */
2671 break;
2672 }
2673
2674 /* finally, do the probe with values obtained */
2675 if (parport_pc_probe_port (port1, port2, irq, dma, NULL)) {
2676 printk (KERN_INFO
2677 "parport_pc: VIA parallel port: io=0x%X", port1);
2678 if (irq != PARPORT_IRQ_NONE)
2679 printk (", irq=%d", irq);
2680 if (dma != PARPORT_DMA_NONE)
2681 printk (", dma=%d", dma);
2682 printk ("\n");
2683 return 1;
2684 }
2685
2686 printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
2687 port1, irq, dma);
2688 return 0;
2689}
2690
2691
2692enum parport_pc_sio_types {
2693 sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */
2694 sio_via_8231, /* Via VT8231 south bridge integrated Super IO */
2695 sio_ite_8872,
2696 last_sio
2697};
2698
2699/* each element directly indexed from enum list, above */
2700static struct parport_pc_superio {
a6767b7c
MK		 2701 int (*probe) (struct pci_dev *pdev, int autoirq, int autodma,
2702 const struct parport_pc_via_data *via);
2703 const struct parport_pc_via_data *via;
1da177e4
LT		 2704} parport_pc_superio_info[] __devinitdata = {
2705 { sio_via_probe, &via_686a_data, },
2706 { sio_via_probe, &via_8231_data, },
2707 { sio_ite_8872_probe, NULL, },
2708};
2709
2710enum parport_pc_pci_cards {
2711 siig_1p_10x = last_sio,
2712 siig_2p_10x,
2713 siig_1p_20x,
2714 siig_2p_20x,
2715 lava_parallel,
2716 lava_parallel_dual_a,
2717 lava_parallel_dual_b,
2718 boca_ioppar,
2719 plx_9050,
2720 timedia_4078a,
2721 timedia_4079h,
2722 timedia_4085h,
2723 timedia_4088a,
2724 timedia_4089a,
2725 timedia_4095a,
2726 timedia_4096a,
2727 timedia_4078u,
2728 timedia_4079a,
2729 timedia_4085u,
2730 timedia_4079r,
2731 timedia_4079s,
2732 timedia_4079d,
2733 timedia_4079e,
2734 timedia_4079f,
2735 timedia_9079a,
2736 timedia_9079b,
2737 timedia_9079c,
2738 timedia_4006a,
2739 timedia_4014,
2740 timedia_4008a,
2741 timedia_4018,
2742 timedia_9018a,
2743 syba_2p_epp,
2744 syba_1p_ecp,
2745 titan_010l,
85747f03 2746 titan_1284p1,
1da177e4
LT		 2747 titan_1284p2,
2748 avlab_1p,
2749 avlab_2p,
2750 oxsemi_954,
2751 oxsemi_840,
2752 aks_0100,
2753 mobility_pp,
2754 netmos_9705,
2755 netmos_9715,
2756 netmos_9755,
2757 netmos_9805,
2758 netmos_9815,
1da177e4
LT		 2759};
2760
2761
2762/* each element directly indexed from enum list, above
2763 * (but offset by last_sio) */
2764static struct parport_pc_pci {
2765 int numports;
2766 struct { /* BAR (base address registers) numbers in the config
2767 space header */
2768 int lo;
2769 int hi; /* -1 if not there, >6 for offset-method (max
2770 BAR is 6) */
2771 } addr[4];
2772
2773 /* If set, this is called immediately after pci_enable_device.
2774 * If it returns non-zero, no probing will take place and the
2775 * ports will not be used. */
2776 int (*preinit_hook) (struct pci_dev *pdev, int autoirq, int autodma);
2777
2778 /* If set, this is called after probing for ports. If 'failed'
2779 * is non-zero we couldn't use any of the ports. */
2780 void (*postinit_hook) (struct pci_dev *pdev, int failed);
96766a3c 2781} cards[] = {
1da177e4
LT		 2782 /* siig_1p_10x */ { 1, { { 2, 3 }, } },
2783 /* siig_2p_10x */ { 2, { { 2, 3 }, { 4, 5 }, } },
2784 /* siig_1p_20x */ { 1, { { 0, 1 }, } },
2785 /* siig_2p_20x */ { 2, { { 0, 1 }, { 2, 3 }, } },
2786 /* lava_parallel */ { 1, { { 0, -1 }, } },
2787 /* lava_parallel_dual_a */ { 1, { { 0, -1 }, } },
2788 /* lava_parallel_dual_b */ { 1, { { 0, -1 }, } },
2789 /* boca_ioppar */ { 1, { { 0, -1 }, } },
2790 /* plx_9050 */ { 2, { { 4, -1 }, { 5, -1 }, } },
2791 /* timedia_4078a */ { 1, { { 2, -1 }, } },
2792 /* timedia_4079h */ { 1, { { 2, 3 }, } },
2793 /* timedia_4085h */ { 2, { { 2, -1 }, { 4, -1 }, } },
2794 /* timedia_4088a */ { 2, { { 2, 3 }, { 4, 5 }, } },
2795 /* timedia_4089a */ { 2, { { 2, 3 }, { 4, 5 }, } },
2796 /* timedia_4095a */ { 2, { { 2, 3 }, { 4, 5 }, } },
2797 /* timedia_4096a */ { 2, { { 2, 3 }, { 4, 5 }, } },
2798 /* timedia_4078u */ { 1, { { 2, -1 }, } },
2799 /* timedia_4079a */ { 1, { { 2, 3 }, } },
2800 /* timedia_4085u */ { 2, { { 2, -1 }, { 4, -1 }, } },
2801 /* timedia_4079r */ { 1, { { 2, 3 }, } },
2802 /* timedia_4079s */ { 1, { { 2, 3 }, } },
2803 /* timedia_4079d */ { 1, { { 2, 3 }, } },
2804 /* timedia_4079e */ { 1, { { 2, 3 }, } },
2805 /* timedia_4079f */ { 1, { { 2, 3 }, } },
2806 /* timedia_9079a */ { 1, { { 2, 3 }, } },
2807 /* timedia_9079b */ { 1, { { 2, 3 }, } },
2808 /* timedia_9079c */ { 1, { { 2, 3 }, } },
2809 /* timedia_4006a */ { 1, { { 0, -1 }, } },
2810 /* timedia_4014 */ { 2, { { 0, -1 }, { 2, -1 }, } },
2811 /* timedia_4008a */ { 1, { { 0, 1 }, } },
2812 /* timedia_4018 */ { 2, { { 0, 1 }, { 2, 3 }, } },
2813 /* timedia_9018a */ { 2, { { 0, 1 }, { 2, 3 }, } },
2814 /* SYBA uses fixed offsets in
2815 a 1K io window */
2816 /* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
2817 /* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } },
2818 /* titan_010l */ { 1, { { 3, -1 }, } },
85747f03 2819 /* titan_1284p1 */ { 1, { { 0, 1 }, } },
1da177e4
LT		 2820 /* titan_1284p2 */ { 2, { { 0, 1 }, { 2, 3 }, } },
2821 /* avlab_1p */ { 1, { { 0, 1}, } },
2822 /* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} },
2823 /* The Oxford Semi cards are unusual: 954 doesn't support ECP,
2824 * and 840 locks up if you write 1 to bit 2! */
2825 /* oxsemi_954 */ { 1, { { 0, -1 }, } },
2826 /* oxsemi_840 */ { 1, { { 0, -1 }, } },
2827 /* aks_0100 */ { 1, { { 0, -1 }, } },
2828 /* mobility_pp */ { 1, { { 0, 1 }, } },
2829 /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */
2830 /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
2831 /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
2832 /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */
2833 /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
1da177e4
LT		 2834};
2835
a6767b7c 2836static const struct pci_device_id parport_pc_pci_tbl[] = {
1da177e4
LT		 2837 /* Super-IO onboard chips */
2838 { 0x1106, 0x0686, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_686a },
2839 { 0x1106, 0x8231, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_8231 },
2840 { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
2841 PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_ite_8872 },
2842
2843 /* PCI cards */
2844 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_10x,
2845 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_10x },
2846 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_10x,
2847 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_10x },
2848 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_20x,
2849 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_20x },
2850 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_20x,
2851 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_20x },
2852 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PARALLEL,
2853 PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel },
2854 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_A,
2855 PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_a },
2856 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_B,
2857 PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_b },
2858 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR,
2859 PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar },
2860 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2861 PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 },
2862 /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
2863 { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
2864 { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
2865 { 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
2866 { 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
2867 { 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
2868 { 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
2869 { 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
2870 { 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
2871 { 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
2872 { 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
2873 { 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
2874 { 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
2875 { 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
2876 { 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
2877 { 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
2878 { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
2879 { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
2880 { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
2881 { 0x1409, 0x7268, 0x1409, 0x0101, 0, 0, timedia_4006a },
2882 { 0x1409, 0x7268, 0x1409, 0x0102, 0, 0, timedia_4014 },
2883 { 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a },
2884 { 0x1409, 0x7268, 0x1409, 0x0104, 0, 0, timedia_4018 },
2885 { 0x1409, 0x7268, 0x1409, 0x9018, 0, 0, timedia_9018a },
2886 { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
2887 { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_2P_EPP,
2888 PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_2p_epp },
2889 { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_1P_ECP,
2890 PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
2891 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
2892 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
85747f03 2893 { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
1da177e4
LT		 2894 { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
2895 /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
2896 { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */
2897 { 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p},
2898 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954PP,
2899 PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_954 },
2900 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_12PCI840,
2901 PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 },
2902 { PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD,
2903 PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
2904 /* NetMos communication controllers */
2905 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
2906 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
2907 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715,
2908 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9715 },
2909 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9755,
2910 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9755 },
2911 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9805,
2912 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
2913 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
2914 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
1da177e4
LT		 2915 { 0, } /* terminate list */
2916};
2917MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
2918
2919struct pci_parport_data {
2920 int num;
2921 struct parport *ports[2];
2922};
2923
2924static int parport_pc_pci_probe (struct pci_dev *dev,
2925 const struct pci_device_id *id)
2926{
2927 int err, count, n, i = id->driver_data;
2928 struct pci_parport_data *data;
2929
2930 if (i < last_sio)
2931 /* This is an onboard Super-IO and has already been probed */
2932 return 0;
2933
2934 /* This is a PCI card */
2935 i -= last_sio;
2936 count = 0;
2937 if ((err = pci_enable_device (dev)) != 0)
2938 return err;
2939
2940 data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL);
2941 if (!data)
2942 return -ENOMEM;
2943
2944 if (cards[i].preinit_hook &&
2945 cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
2946 kfree(data);
2947 return -ENODEV;
2948 }
2949
2950 for (n = 0; n < cards[i].numports; n++) {
2951 int lo = cards[i].addr[n].lo;
2952 int hi = cards[i].addr[n].hi;
2953 unsigned long io_lo, io_hi;
2954 io_lo = pci_resource_start (dev, lo);
2955 io_hi = 0;
2956 if ((hi >= 0) && (hi <= 6))
2957 io_hi = pci_resource_start (dev, hi);
2958 else if (hi > 6)
2959 io_lo += hi; /* Reinterpret the meaning of
2960 "hi" as an offset (see SYBA
2961 def.) */
2962 /* TODO: test if sharing interrupts works */
2963 printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
2964 "I/O at %#lx(%#lx)\n",
2965 parport_pc_pci_tbl[i + last_sio].vendor,
2966 parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi);
2967 data->ports[count] =
2968 parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
2969 PARPORT_DMA_NONE, dev);
2970 if (data->ports[count])
2971 count++;
2972 }
2973
2974 data->num = count;
2975
2976 if (cards[i].postinit_hook)
2977 cards[i].postinit_hook (dev, count == 0);
2978
2979 if (count) {
2980 pci_set_drvdata(dev, data);
2981 return 0;
2982 }
2983
2984 kfree(data);
2985
2986 return -ENODEV;
2987}
2988
2989static void __devexit parport_pc_pci_remove(struct pci_dev *dev)
2990{
2991 struct pci_parport_data *data = pci_get_drvdata(dev);
2992 int i;
2993
2994 pci_set_drvdata(dev, NULL);
2995
2996 if (data) {
2997 for (i = data->num - 1; i >= 0; i--)
2998 parport_pc_unregister_port(data->ports[i]);
2999
3000 kfree(data);
3001 }
3002}
3003
3004static struct pci_driver parport_pc_pci_driver = {
3005 .name = "parport_pc",
3006 .id_table = parport_pc_pci_tbl,
3007 .probe = parport_pc_pci_probe,
3008 .remove = __devexit_p(parport_pc_pci_remove),
3009};
3010
3011static int __init parport_pc_init_superio (int autoirq, int autodma)
3012{
3013 const struct pci_device_id *id;
3014 struct pci_dev *pdev = NULL;
3015 int ret = 0;
3016
c9d8073f 3017 for_each_pci_dev(pdev) {
75865858 3018 id = pci_match_id(parport_pc_pci_tbl, pdev);
1da177e4
LT		 3019 if (id == NULL || id->driver_data >= last_sio)
3020 continue;
3021
3022 if (parport_pc_superio_info[id->driver_data].probe
3023 (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) {
3024 ret++;
3025 }
3026 }
3027
3028 return ret; /* number of devices found */
3029}
3030#else
3031static struct pci_driver parport_pc_pci_driver;
3032static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;}
3033#endif /* CONFIG_PCI */
3034
3035
3036static const struct pnp_device_id parport_pc_pnp_tbl[] = {
3037 /* Standard LPT Printer Port */
3038 {.id = "PNP0400", .driver_data = 0},
3039 /* ECP Printer Port */
3040 {.id = "PNP0401", .driver_data = 0},
3041 { }
3042};
3043
3044MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl);
3045
3046static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
3047{
3048 struct parport *pdata;
3049 unsigned long io_lo, io_hi;
3050 int dma, irq;
3051
3052 if (pnp_port_valid(dev,0) &&
3053 !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) {
3054 io_lo = pnp_port_start(dev,0);
3055 } else
3056 return -EINVAL;
3057
3058 if (pnp_port_valid(dev,1) &&
3059 !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) {
3060 io_hi = pnp_port_start(dev,1);
3061 } else
3062 io_hi = 0;
3063
3064 if (pnp_irq_valid(dev,0) &&
3065 !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
3066 irq = pnp_irq(dev,0);
3067 } else
3068 irq = PARPORT_IRQ_NONE;
3069
3070 if (pnp_dma_valid(dev,0) &&
3071 !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) {
3072 dma = pnp_dma(dev,0);
3073 } else
3074 dma = PARPORT_DMA_NONE;
3075
3076 printk(KERN_INFO "parport: PnPBIOS parport detected.\n");
3077 if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, NULL)))
3078 return -ENODEV;
3079
3080 pnp_set_drvdata(dev,pdata);
3081 return 0;
3082}
3083
3084static void parport_pc_pnp_remove(struct pnp_dev *dev)
3085{
3086 struct parport *pdata = (struct parport *)pnp_get_drvdata(dev);
3087 if (!pdata)
3088 return;
3089
3090 parport_pc_unregister_port(pdata);
3091}
3092
3093/* we only need the pnp layer to activate the device, at least for now */
3094static struct pnp_driver parport_pc_pnp_driver = {
3095 .name = "parport_pc",
3096 .id_table = parport_pc_pnp_tbl,
3097 .probe = parport_pc_pnp_probe,
3098 .remove = parport_pc_pnp_remove,
3099};
3100
3101
3102/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
3103static int __devinit __attribute__((unused))
3104parport_pc_find_isa_ports (int autoirq, int autodma)
3105{
3106 int count = 0;
3107
3108 if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL))
3109 count++;
3110 if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL))
3111 count++;
3112 if (parport_pc_probe_port(0x278, 0x678, autoirq, autodma, NULL))
3113 count++;
3114
3115 return count;
3116}
3117
3118/* This function is called by parport_pc_init if the user didn't
3119 * specify any ports to probe. Its job is to find some ports. Order
3120 * is important here -- we want ISA ports to be registered first,
3121 * followed by PCI cards (for least surprise), but before that we want
3122 * to do chipset-specific tests for some onboard ports that we know
3123 * about.
3124 *
3125 * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY
3126 * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO
3127 */
7597fee3 3128static void __init parport_pc_find_ports (int autoirq, int autodma)
1da177e4 3129{
7597fee3 3130 int count = 0, err;
1da177e4
LT		 3131
3132#ifdef CONFIG_PARPORT_PC_SUPERIO
3133 detect_and_report_winbond ();
3134 detect_and_report_smsc ();
3135#endif
3136
3137 /* Onboard SuperIO chipsets that show themselves on the PCI bus. */
3138 count += parport_pc_init_superio (autoirq, autodma);
3139
3140 /* PnP ports, skip detection if SuperIO already found them */
3141 if (!count) {
7597fee3
BH		 3142 err = pnp_register_driver (&parport_pc_pnp_driver);
3143 if (!err)
1da177e4 3144 pnp_registered_parport = 1;
1da177e4
LT		 3145 }
3146
3147 /* ISA ports and whatever (see asm/parport.h). */
7597fee3 3148 parport_pc_find_nonpci_ports (autoirq, autodma);
1da177e4 3149
7597fee3
BH		 3150 err = pci_register_driver (&parport_pc_pci_driver);
3151 if (!err)
3152 pci_registered_parport = 1;
1da177e4
LT		 3153}
3154
3155/*
3156 * Piles of crap below pretend to be a parser for module and kernel
3157 * parameters. Say "thank you" to whoever had come up with that
3158 * syntax and keep in mind that code below is a cleaned up version.
3159 */
3160
3161static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 };
3162static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] =
3163 { [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO };
3164static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE };
3165static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY };
3166
3167static int __init parport_parse_param(const char *s, int *val,
3168 int automatic, int none, int nofifo)
3169{
3170 if (!s)
3171 return 0;
3172 if (!strncmp(s, "auto", 4))
3173 *val = automatic;
3174 else if (!strncmp(s, "none", 4))
3175 *val = none;
3176 else if (nofifo && !strncmp(s, "nofifo", 4))
3177 *val = nofifo;
3178 else {
3179 char *ep;
3180 unsigned long r = simple_strtoul(s, &ep, 0);
3181 if (ep != s)
3182 *val = r;
3183 else {
3184 printk(KERN_ERR "parport: bad specifier `%s'\n", s);
3185 return -1;
3186 }
3187 }
3188 return 0;
3189}
3190
3191static int __init parport_parse_irq(const char *irqstr, int *val)
3192{
3193 return parport_parse_param(irqstr, val, PARPORT_IRQ_AUTO,
3194 PARPORT_IRQ_NONE, 0);
3195}
3196
3197static int __init parport_parse_dma(const char *dmastr, int *val)
3198{
3199 return parport_parse_param(dmastr, val, PARPORT_DMA_AUTO,
3200 PARPORT_DMA_NONE, PARPORT_DMA_NOFIFO);
3201}
3202
3203#ifdef CONFIG_PCI
3204static int __init parport_init_mode_setup(char *str)
3205{
3206 printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
3207
3208 if (!strcmp (str, "spp"))
3209 parport_init_mode=1;
3210 if (!strcmp (str, "ps2"))
3211 parport_init_mode=2;
3212 if (!strcmp (str, "epp"))
3213 parport_init_mode=3;
3214 if (!strcmp (str, "ecp"))
3215 parport_init_mode=4;
3216 if (!strcmp (str, "ecpepp"))
3217 parport_init_mode=5;
3218 return 1;
3219}
3220#endif
3221
3222#ifdef MODULE
3223static const char *irq[PARPORT_PC_MAX_PORTS];
3224static const char *dma[PARPORT_PC_MAX_PORTS];
3225
3226MODULE_PARM_DESC(io, "Base I/O address (SPP regs)");
3227module_param_array(io, int, NULL, 0);
3228MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)");
3229module_param_array(io_hi, int, NULL, 0);
3230MODULE_PARM_DESC(irq, "IRQ line");
3231module_param_array(irq, charp, NULL, 0);
3232MODULE_PARM_DESC(dma, "DMA channel");
3233module_param_array(dma, charp, NULL, 0);
3234#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
3235 (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
3236MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation");
3237module_param(verbose_probing, int, 0644);
3238#endif
3239#ifdef CONFIG_PCI
3240static char *init_mode;
3241MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
3242module_param(init_mode, charp, 0);
3243#endif
3244
3245static int __init parse_parport_params(void)
3246{
3247 unsigned int i;
3248 int val;
3249
3250#ifdef CONFIG_PCI
3251 if (init_mode)
3252 parport_init_mode_setup(init_mode);
3253#endif
3254
3255 for (i = 0; i < PARPORT_PC_MAX_PORTS && io[i]; i++) {
3256 if (parport_parse_irq(irq[i], &val))
3257 return 1;
3258 irqval[i] = val;
3259 if (parport_parse_dma(dma[i], &val))
3260 return 1;
3261 dmaval[i] = val;
3262 }
3263 if (!io[0]) {
3264 /* The user can make us use any IRQs or DMAs we find. */
3265 if (irq[0] && !parport_parse_irq(irq[0], &val))
3266 switch (val) {
3267 case PARPORT_IRQ_NONE:
3268 case PARPORT_IRQ_AUTO:
3269 irqval[0] = val;
3270 break;
3271 default:
3272 printk (KERN_WARNING
3273 "parport_pc: irq specified "
3274 "without base address. Use 'io=' "
3275 "to specify one\n");
3276 }
3277
3278 if (dma[0] && !parport_parse_dma(dma[0], &val))
3279 switch (val) {
3280 case PARPORT_DMA_NONE:
3281 case PARPORT_DMA_AUTO:
3282 dmaval[0] = val;
3283 break;
3284 default:
3285 printk (KERN_WARNING
3286 "parport_pc: dma specified "
3287 "without base address. Use 'io=' "
3288 "to specify one\n");
3289 }
3290 }
3291 return 0;
3292}
3293
3294#else
3295
3296static int parport_setup_ptr __initdata = 0;
3297
3298/*
3299 * Acceptable parameters:
3300 *
3301 * parport=0
3302 * parport=auto
3303 * parport=0xBASE[,IRQ[,DMA]]
3304 *
3305 * IRQ/DMA may be numeric or 'auto' or 'none'
3306 */
3307static int __init parport_setup (char *str)
3308{
3309 char *endptr;
3310 char *sep;
3311 int val;
3312
3313 if (!str || !*str || (*str == '0' && !*(str+1))) {
3314 /* Disable parport if "parport=0" in cmdline */
3315 io[0] = PARPORT_DISABLE;
3316 return 1;
3317 }
3318
3319 if (!strncmp (str, "auto", 4)) {
3320 irqval[0] = PARPORT_IRQ_AUTO;
3321 dmaval[0] = PARPORT_DMA_AUTO;
3322 return 1;
3323 }
3324
3325 val = simple_strtoul (str, &endptr, 0);
3326 if (endptr == str) {
3327 printk (KERN_WARNING "parport=%s not understood\n", str);
3328 return 1;
3329 }
3330
3331 if (parport_setup_ptr == PARPORT_PC_MAX_PORTS) {
3332 printk(KERN_ERR "parport=%s ignored, too many ports\n", str);
3333 return 1;
3334 }
3335
3336 io[parport_setup_ptr] = val;
3337 irqval[parport_setup_ptr] = PARPORT_IRQ_NONE;
3338 dmaval[parport_setup_ptr] = PARPORT_DMA_NONE;
3339
3340 sep = strchr(str, ',');
3341 if (sep++) {
3342 if (parport_parse_irq(sep, &val))
3343 return 1;
3344 irqval[parport_setup_ptr] = val;
3345 sep = strchr(sep, ',');
3346 if (sep++) {
3347 if (parport_parse_dma(sep, &val))
3348 return 1;
3349 dmaval[parport_setup_ptr] = val;
3350 }
3351 }
3352 parport_setup_ptr++;
3353 return 1;
3354}
3355
3356static int __init parse_parport_params(void)
3357{
3358 return io[0] == PARPORT_DISABLE;
3359}
3360
3361__setup ("parport=", parport_setup);
3362
3363/*
3364 * Acceptable parameters:
3365 *
3366 * parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
3367 */
3368#ifdef CONFIG_PCI
3369__setup("parport_init_mode=",parport_init_mode_setup);
3370#endif
3371#endif
3372
3373/* "Parser" ends here */
3374
3375static int __init parport_pc_init(void)
3376{
1da177e4
LT		 3377 if (parse_parport_params())
3378 return -EINVAL;
3379
3380 if (io[0]) {
3381 int i;
3382 /* Only probe the ports we were given. */
3383 user_specified = 1;
3384 for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) {
3385 if (!io[i])
3386 break;
3387 if ((io_hi[i]) == PARPORT_IOHI_AUTO)
3388 io_hi[i] = 0x400 + io[i];
7597fee3
BH		 3389 parport_pc_probe_port(io[i], io_hi[i],
3390 irqval[i], dmaval[i], NULL);
1da177e4
LT		 3391 }
3392 } else
7597fee3 3393 parport_pc_find_ports (irqval[0], dmaval[0]);
1da177e4
LT		 3394
3395 return 0;
3396}
3397
3398static void __exit parport_pc_exit(void)
3399{
3400 if (pci_registered_parport)
3401 pci_unregister_driver (&parport_pc_pci_driver);
3402 if (pnp_registered_parport)
3403 pnp_unregister_driver (&parport_pc_pnp_driver);
3404
3405 spin_lock(&ports_lock);
3406 while (!list_empty(&ports_list)) {
3407 struct parport_pc_private *priv;
3408 struct parport *port;
3409 priv = list_entry(ports_list.next,
3410 struct parport_pc_private, list);
3411 port = priv->port;
3412 spin_unlock(&ports_lock);
3413 parport_pc_unregister_port(port);
3414 spin_lock(&ports_lock);
3415 }
3416 spin_unlock(&ports_lock);
3417}
3418
3419MODULE_AUTHOR("Phil Blundell, Tim Waugh, others");
3420MODULE_DESCRIPTION("PC-style parallel port driver");
3421MODULE_LICENSE("GPL");
3422module_init(parport_pc_init)
3423module_exit(parport_pc_exit)
Linux 6.x block layer and io_uring tree(s)