Commit | Line | Data |
---|---|---|
f5fc0f86 LC |
1 | /* |
2 | * This file is part of wl1271 | |
3 | * | |
2f826f55 | 4 | * Copyright (C) 2008-2010 Nokia Corporation |
f5fc0f86 LC |
5 | * |
6 | * Contact: Luciano Coelho <luciano.coelho@nokia.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License | |
10 | * version 2 as published by the Free Software Foundation. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, but | |
13 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
15 | * General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
20 | * 02110-1301 USA | |
21 | * | |
22 | */ | |
23 | ||
5a0e3ad6 | 24 | #include <linux/slab.h> |
5ea417ae | 25 | #include <linux/wl12xx.h> |
f5fc0f86 | 26 | |
00d20100 SL |
27 | #include "acx.h" |
28 | #include "reg.h" | |
29 | #include "boot.h" | |
30 | #include "io.h" | |
31 | #include "event.h" | |
ae113b57 | 32 | #include "rx.h" |
f5fc0f86 LC |
33 | |
34 | static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { | |
35 | [PART_DOWN] = { | |
36 | .mem = { | |
37 | .start = 0x00000000, | |
38 | .size = 0x000177c0 | |
39 | }, | |
40 | .reg = { | |
41 | .start = REGISTERS_BASE, | |
42 | .size = 0x00008800 | |
43 | }, | |
451de97a JO |
44 | .mem2 = { |
45 | .start = 0x00000000, | |
46 | .size = 0x00000000 | |
47 | }, | |
48 | .mem3 = { | |
49 | .start = 0x00000000, | |
50 | .size = 0x00000000 | |
51 | }, | |
f5fc0f86 LC |
52 | }, |
53 | ||
54 | [PART_WORK] = { | |
55 | .mem = { | |
56 | .start = 0x00040000, | |
57 | .size = 0x00014fc0 | |
58 | }, | |
59 | .reg = { | |
60 | .start = REGISTERS_BASE, | |
451de97a JO |
61 | .size = 0x0000a000 |
62 | }, | |
63 | .mem2 = { | |
64 | .start = 0x003004f8, | |
65 | .size = 0x00000004 | |
66 | }, | |
67 | .mem3 = { | |
68 | .start = 0x00040404, | |
69 | .size = 0x00000000 | |
f5fc0f86 LC |
70 | }, |
71 | }, | |
72 | ||
73 | [PART_DRPW] = { | |
74 | .mem = { | |
75 | .start = 0x00040000, | |
76 | .size = 0x00014fc0 | |
77 | }, | |
78 | .reg = { | |
79 | .start = DRPW_BASE, | |
80 | .size = 0x00006000 | |
451de97a JO |
81 | }, |
82 | .mem2 = { | |
83 | .start = 0x00000000, | |
84 | .size = 0x00000000 | |
85 | }, | |
86 | .mem3 = { | |
87 | .start = 0x00000000, | |
88 | .size = 0x00000000 | |
f5fc0f86 LC |
89 | } |
90 | } | |
91 | }; | |
92 | ||
93 | static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag) | |
94 | { | |
95 | u32 cpu_ctrl; | |
96 | ||
97 | /* 10.5.0 run the firmware (I) */ | |
7b048c52 | 98 | cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL); |
f5fc0f86 LC |
99 | |
100 | /* 10.5.1 run the firmware (II) */ | |
101 | cpu_ctrl |= flag; | |
7b048c52 | 102 | wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); |
f5fc0f86 LC |
103 | } |
104 | ||
842f1a6c IY |
105 | static unsigned int wl12xx_get_fw_ver_quirks(struct wl1271 *wl) |
106 | { | |
107 | unsigned int quirks = 0; | |
108 | unsigned int *fw_ver = wl->chip.fw_ver; | |
109 | ||
110 | /* Only for wl127x */ | |
111 | if ((fw_ver[FW_VER_CHIP] == FW_VER_CHIP_WL127X) && | |
112 | /* Check STA version */ | |
113 | (((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) && | |
114 | (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_1_SPARE_STA_MIN)) || | |
115 | /* Check AP version */ | |
116 | ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP) && | |
117 | (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_1_SPARE_AP_MIN)))) | |
118 | quirks |= WL12XX_QUIRK_USE_2_SPARE_BLOCKS; | |
119 | ||
95dac04f IY |
120 | /* Only new station firmwares support routing fw logs to the host */ |
121 | if ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) && | |
122 | (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_FWLOG_STA_MIN)) | |
123 | quirks |= WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED; | |
124 | ||
125 | /* This feature is not yet supported for AP mode */ | |
126 | if (fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP) | |
127 | quirks |= WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED; | |
128 | ||
842f1a6c IY |
129 | return quirks; |
130 | } | |
131 | ||
4b7fac77 LS |
132 | static void wl1271_parse_fw_ver(struct wl1271 *wl) |
133 | { | |
134 | int ret; | |
135 | ||
136 | ret = sscanf(wl->chip.fw_ver_str + 4, "%u.%u.%u.%u.%u", | |
137 | &wl->chip.fw_ver[0], &wl->chip.fw_ver[1], | |
138 | &wl->chip.fw_ver[2], &wl->chip.fw_ver[3], | |
139 | &wl->chip.fw_ver[4]); | |
140 | ||
141 | if (ret != 5) { | |
142 | wl1271_warning("fw version incorrect value"); | |
143 | memset(wl->chip.fw_ver, 0, sizeof(wl->chip.fw_ver)); | |
144 | return; | |
145 | } | |
842f1a6c IY |
146 | |
147 | /* Check if any quirks are needed with older fw versions */ | |
148 | wl->quirks |= wl12xx_get_fw_ver_quirks(wl); | |
4b7fac77 LS |
149 | } |
150 | ||
f5fc0f86 LC |
151 | static void wl1271_boot_fw_version(struct wl1271 *wl) |
152 | { | |
153 | struct wl1271_static_data static_data; | |
154 | ||
7b048c52 TP |
155 | wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data), |
156 | false); | |
f5fc0f86 | 157 | |
4b7fac77 LS |
158 | strncpy(wl->chip.fw_ver_str, static_data.fw_version, |
159 | sizeof(wl->chip.fw_ver_str)); | |
f5fc0f86 LC |
160 | |
161 | /* make sure the string is NULL-terminated */ | |
4b7fac77 LS |
162 | wl->chip.fw_ver_str[sizeof(wl->chip.fw_ver_str) - 1] = '\0'; |
163 | ||
164 | wl1271_parse_fw_ver(wl); | |
f5fc0f86 LC |
165 | } |
166 | ||
167 | static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, | |
168 | size_t fw_data_len, u32 dest) | |
169 | { | |
451de97a | 170 | struct wl1271_partition_set partition; |
f5fc0f86 | 171 | int addr, chunk_num, partition_limit; |
1fba4974 | 172 | u8 *p, *chunk; |
f5fc0f86 LC |
173 | |
174 | /* whal_FwCtrl_LoadFwImageSm() */ | |
175 | ||
176 | wl1271_debug(DEBUG_BOOT, "starting firmware upload"); | |
177 | ||
73d0a13c LC |
178 | wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d", |
179 | fw_data_len, CHUNK_SIZE); | |
f5fc0f86 | 180 | |
f5fc0f86 LC |
181 | if ((fw_data_len % 4) != 0) { |
182 | wl1271_error("firmware length not multiple of four"); | |
183 | return -EIO; | |
184 | } | |
185 | ||
1fba4974 | 186 | chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL); |
ed317788 | 187 | if (!chunk) { |
1fba4974 JO |
188 | wl1271_error("allocation for firmware upload chunk failed"); |
189 | return -ENOMEM; | |
190 | } | |
191 | ||
451de97a JO |
192 | memcpy(&partition, &part_table[PART_DOWN], sizeof(partition)); |
193 | partition.mem.start = dest; | |
194 | wl1271_set_partition(wl, &partition); | |
f5fc0f86 LC |
195 | |
196 | /* 10.1 set partition limit and chunk num */ | |
197 | chunk_num = 0; | |
198 | partition_limit = part_table[PART_DOWN].mem.size; | |
199 | ||
200 | while (chunk_num < fw_data_len / CHUNK_SIZE) { | |
201 | /* 10.2 update partition, if needed */ | |
202 | addr = dest + (chunk_num + 2) * CHUNK_SIZE; | |
203 | if (addr > partition_limit) { | |
204 | addr = dest + chunk_num * CHUNK_SIZE; | |
205 | partition_limit = chunk_num * CHUNK_SIZE + | |
206 | part_table[PART_DOWN].mem.size; | |
451de97a JO |
207 | partition.mem.start = addr; |
208 | wl1271_set_partition(wl, &partition); | |
f5fc0f86 LC |
209 | } |
210 | ||
211 | /* 10.3 upload the chunk */ | |
212 | addr = dest + chunk_num * CHUNK_SIZE; | |
213 | p = buf + chunk_num * CHUNK_SIZE; | |
1fba4974 | 214 | memcpy(chunk, p, CHUNK_SIZE); |
f5fc0f86 LC |
215 | wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", |
216 | p, addr); | |
7b048c52 | 217 | wl1271_write(wl, addr, chunk, CHUNK_SIZE, false); |
f5fc0f86 LC |
218 | |
219 | chunk_num++; | |
220 | } | |
221 | ||
222 | /* 10.4 upload the last chunk */ | |
223 | addr = dest + chunk_num * CHUNK_SIZE; | |
224 | p = buf + chunk_num * CHUNK_SIZE; | |
1fba4974 | 225 | memcpy(chunk, p, fw_data_len % CHUNK_SIZE); |
73d0a13c | 226 | wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x", |
f5fc0f86 | 227 | fw_data_len % CHUNK_SIZE, p, addr); |
7b048c52 | 228 | wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false); |
f5fc0f86 | 229 | |
1fba4974 | 230 | kfree(chunk); |
f5fc0f86 LC |
231 | return 0; |
232 | } | |
233 | ||
234 | static int wl1271_boot_upload_firmware(struct wl1271 *wl) | |
235 | { | |
236 | u32 chunks, addr, len; | |
ed317788 | 237 | int ret = 0; |
f5fc0f86 LC |
238 | u8 *fw; |
239 | ||
240 | fw = wl->fw; | |
d0f63b20 | 241 | chunks = be32_to_cpup((__be32 *) fw); |
f5fc0f86 LC |
242 | fw += sizeof(u32); |
243 | ||
244 | wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks); | |
245 | ||
246 | while (chunks--) { | |
d0f63b20 | 247 | addr = be32_to_cpup((__be32 *) fw); |
f5fc0f86 | 248 | fw += sizeof(u32); |
d0f63b20 | 249 | len = be32_to_cpup((__be32 *) fw); |
f5fc0f86 LC |
250 | fw += sizeof(u32); |
251 | ||
252 | if (len > 300000) { | |
253 | wl1271_info("firmware chunk too long: %u", len); | |
254 | return -EINVAL; | |
255 | } | |
256 | wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u", | |
257 | chunks, addr, len); | |
ed317788 JO |
258 | ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr); |
259 | if (ret != 0) | |
260 | break; | |
f5fc0f86 LC |
261 | fw += len; |
262 | } | |
263 | ||
ed317788 | 264 | return ret; |
f5fc0f86 LC |
265 | } |
266 | ||
267 | static int wl1271_boot_upload_nvs(struct wl1271 *wl) | |
268 | { | |
269 | size_t nvs_len, burst_len; | |
270 | int i; | |
271 | u32 dest_addr, val; | |
152ee6e0 | 272 | u8 *nvs_ptr, *nvs_aligned; |
f5fc0f86 | 273 | |
152ee6e0 | 274 | if (wl->nvs == NULL) |
f5fc0f86 LC |
275 | return -ENODEV; |
276 | ||
bc765bf3 SL |
277 | if (wl->chip.id == CHIP_ID_1283_PG20) { |
278 | struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs; | |
279 | ||
280 | if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) { | |
281 | if (nvs->general_params.dual_mode_select) | |
282 | wl->enable_11a = true; | |
283 | } else { | |
284 | wl1271_error("nvs size is not as expected: %zu != %zu", | |
285 | wl->nvs_len, | |
286 | sizeof(struct wl128x_nvs_file)); | |
287 | kfree(wl->nvs); | |
288 | wl->nvs = NULL; | |
289 | wl->nvs_len = 0; | |
290 | return -EILSEQ; | |
291 | } | |
02fabb0e | 292 | |
bc765bf3 SL |
293 | /* only the first part of the NVS needs to be uploaded */ |
294 | nvs_len = sizeof(nvs->nvs); | |
295 | nvs_ptr = (u8 *)nvs->nvs; | |
296 | ||
297 | } else { | |
298 | struct wl1271_nvs_file *nvs = | |
299 | (struct wl1271_nvs_file *)wl->nvs; | |
300 | /* | |
301 | * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz | |
302 | * band configurations) can be removed when those NVS files stop | |
303 | * floating around. | |
304 | */ | |
305 | if (wl->nvs_len == sizeof(struct wl1271_nvs_file) || | |
306 | wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) { | |
307 | /* for now 11a is unsupported in AP mode */ | |
308 | if (wl->bss_type != BSS_TYPE_AP_BSS && | |
309 | nvs->general_params.dual_mode_select) | |
310 | wl->enable_11a = true; | |
311 | } | |
02fabb0e | 312 | |
bc765bf3 SL |
313 | if (wl->nvs_len != sizeof(struct wl1271_nvs_file) && |
314 | (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE || | |
315 | wl->enable_11a)) { | |
316 | wl1271_error("nvs size is not as expected: %zu != %zu", | |
317 | wl->nvs_len, sizeof(struct wl1271_nvs_file)); | |
318 | kfree(wl->nvs); | |
319 | wl->nvs = NULL; | |
320 | wl->nvs_len = 0; | |
321 | return -EILSEQ; | |
322 | } | |
323 | ||
324 | /* only the first part of the NVS needs to be uploaded */ | |
325 | nvs_len = sizeof(nvs->nvs); | |
326 | nvs_ptr = (u8 *) nvs->nvs; | |
327 | } | |
f5fc0f86 | 328 | |
1b72aecd JO |
329 | /* update current MAC address to NVS */ |
330 | nvs_ptr[11] = wl->mac_addr[0]; | |
331 | nvs_ptr[10] = wl->mac_addr[1]; | |
332 | nvs_ptr[6] = wl->mac_addr[2]; | |
333 | nvs_ptr[5] = wl->mac_addr[3]; | |
334 | nvs_ptr[4] = wl->mac_addr[4]; | |
335 | nvs_ptr[3] = wl->mac_addr[5]; | |
336 | ||
f5fc0f86 LC |
337 | /* |
338 | * Layout before the actual NVS tables: | |
339 | * 1 byte : burst length. | |
340 | * 2 bytes: destination address. | |
341 | * n bytes: data to burst copy. | |
342 | * | |
343 | * This is ended by a 0 length, then the NVS tables. | |
344 | */ | |
345 | ||
346 | /* FIXME: Do we need to check here whether the LSB is 1? */ | |
347 | while (nvs_ptr[0]) { | |
348 | burst_len = nvs_ptr[0]; | |
349 | dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8)); | |
350 | ||
2f63b011 JO |
351 | /* |
352 | * Due to our new wl1271_translate_reg_addr function, | |
353 | * we need to add the REGISTER_BASE to the destination | |
354 | */ | |
f5fc0f86 LC |
355 | dest_addr += REGISTERS_BASE; |
356 | ||
357 | /* We move our pointer to the data */ | |
358 | nvs_ptr += 3; | |
359 | ||
360 | for (i = 0; i < burst_len; i++) { | |
361 | val = (nvs_ptr[0] | (nvs_ptr[1] << 8) | |
362 | | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); | |
363 | ||
364 | wl1271_debug(DEBUG_BOOT, | |
365 | "nvs burst write 0x%x: 0x%x", | |
366 | dest_addr, val); | |
7b048c52 | 367 | wl1271_write32(wl, dest_addr, val); |
f5fc0f86 LC |
368 | |
369 | nvs_ptr += 4; | |
370 | dest_addr += 4; | |
371 | } | |
372 | } | |
373 | ||
374 | /* | |
375 | * We've reached the first zero length, the first NVS table | |
67e0208a | 376 | * is located at an aligned offset which is at least 7 bytes further. |
bc765bf3 SL |
377 | * NOTE: The wl->nvs->nvs element must be first, in order to |
378 | * simplify the casting, we assume it is at the beginning of | |
379 | * the wl->nvs structure. | |
f5fc0f86 | 380 | */ |
bc765bf3 SL |
381 | nvs_ptr = (u8 *)wl->nvs + |
382 | ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4); | |
383 | nvs_len -= nvs_ptr - (u8 *)wl->nvs; | |
f5fc0f86 | 384 | |
f5fc0f86 | 385 | /* Now we must set the partition correctly */ |
451de97a | 386 | wl1271_set_partition(wl, &part_table[PART_WORK]); |
f5fc0f86 LC |
387 | |
388 | /* Copy the NVS tables to a new block to ensure alignment */ | |
67e0208a IY |
389 | nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); |
390 | if (!nvs_aligned) | |
391 | return -ENOMEM; | |
f5fc0f86 LC |
392 | |
393 | /* And finally we upload the NVS tables */ | |
7b048c52 | 394 | wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false); |
f5fc0f86 LC |
395 | |
396 | kfree(nvs_aligned); | |
397 | return 0; | |
398 | } | |
399 | ||
400 | static void wl1271_boot_enable_interrupts(struct wl1271 *wl) | |
401 | { | |
54f7e503 | 402 | wl1271_enable_interrupts(wl); |
7b048c52 TP |
403 | wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, |
404 | WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK)); | |
405 | wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL); | |
f5fc0f86 LC |
406 | } |
407 | ||
408 | static int wl1271_boot_soft_reset(struct wl1271 *wl) | |
409 | { | |
410 | unsigned long timeout; | |
411 | u32 boot_data; | |
412 | ||
413 | /* perform soft reset */ | |
7b048c52 | 414 | wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); |
f5fc0f86 LC |
415 | |
416 | /* SOFT_RESET is self clearing */ | |
417 | timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); | |
418 | while (1) { | |
7b048c52 | 419 | boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET); |
f5fc0f86 LC |
420 | wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); |
421 | if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) | |
422 | break; | |
423 | ||
424 | if (time_after(jiffies, timeout)) { | |
425 | /* 1.2 check pWhalBus->uSelfClearTime if the | |
426 | * timeout was reached */ | |
427 | wl1271_error("soft reset timeout"); | |
428 | return -1; | |
429 | } | |
430 | ||
431 | udelay(SOFT_RESET_STALL_TIME); | |
432 | } | |
433 | ||
434 | /* disable Rx/Tx */ | |
7b048c52 | 435 | wl1271_write32(wl, ENABLE, 0x0); |
f5fc0f86 LC |
436 | |
437 | /* disable auto calibration on start*/ | |
7b048c52 | 438 | wl1271_write32(wl, SPARE_A2, 0xffff); |
f5fc0f86 LC |
439 | |
440 | return 0; | |
441 | } | |
442 | ||
443 | static int wl1271_boot_run_firmware(struct wl1271 *wl) | |
444 | { | |
445 | int loop, ret; | |
23a7a51c | 446 | u32 chip_id, intr; |
f5fc0f86 LC |
447 | |
448 | wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT); | |
449 | ||
7b048c52 | 450 | chip_id = wl1271_read32(wl, CHIP_ID_B); |
f5fc0f86 LC |
451 | |
452 | wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id); | |
453 | ||
454 | if (chip_id != wl->chip.id) { | |
455 | wl1271_error("chip id doesn't match after firmware boot"); | |
456 | return -EIO; | |
457 | } | |
458 | ||
459 | /* wait for init to complete */ | |
460 | loop = 0; | |
461 | while (loop++ < INIT_LOOP) { | |
462 | udelay(INIT_LOOP_DELAY); | |
23a7a51c | 463 | intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
f5fc0f86 | 464 | |
23a7a51c | 465 | if (intr == 0xffffffff) { |
f5fc0f86 LC |
466 | wl1271_error("error reading hardware complete " |
467 | "init indication"); | |
468 | return -EIO; | |
469 | } | |
470 | /* check that ACX_INTR_INIT_COMPLETE is enabled */ | |
23a7a51c | 471 | else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) { |
7b048c52 TP |
472 | wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, |
473 | WL1271_ACX_INTR_INIT_COMPLETE); | |
f5fc0f86 LC |
474 | break; |
475 | } | |
476 | } | |
477 | ||
e7d17cf4 | 478 | if (loop > INIT_LOOP) { |
f5fc0f86 LC |
479 | wl1271_error("timeout waiting for the hardware to " |
480 | "complete initialization"); | |
481 | return -EIO; | |
482 | } | |
483 | ||
484 | /* get hardware config command mail box */ | |
7b048c52 | 485 | wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR); |
f5fc0f86 LC |
486 | |
487 | /* get hardware config event mail box */ | |
7b048c52 | 488 | wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); |
f5fc0f86 LC |
489 | |
490 | /* set the working partition to its "running" mode offset */ | |
451de97a | 491 | wl1271_set_partition(wl, &part_table[PART_WORK]); |
f5fc0f86 LC |
492 | |
493 | wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x", | |
494 | wl->cmd_box_addr, wl->event_box_addr); | |
495 | ||
496 | wl1271_boot_fw_version(wl); | |
497 | ||
498 | /* | |
499 | * in case of full asynchronous mode the firmware event must be | |
500 | * ready to receive event from the command mailbox | |
501 | */ | |
502 | ||
be823e5b JO |
503 | /* unmask required mbox events */ |
504 | wl->event_mask = BSS_LOSE_EVENT_ID | | |
19ad0715 | 505 | SCAN_COMPLETE_EVENT_ID | |
99d84c1d | 506 | PS_REPORT_EVENT_ID | |
2f826f55 | 507 | JOIN_EVENT_COMPLETE_ID | |
00236aed | 508 | DISCONNECT_EVENT_COMPLETE_ID | |
90494a90 | 509 | RSSI_SNR_TRIGGER_0_EVENT_ID | |
8d2ef7bd | 510 | PSPOLL_DELIVERY_FAILURE_EVENT_ID | |
6394c01b LC |
511 | SOFT_GEMINI_SENSE_EVENT_ID | |
512 | PERIODIC_SCAN_REPORT_EVENT_ID | | |
513 | PERIODIC_SCAN_COMPLETE_EVENT_ID; | |
f5fc0f86 | 514 | |
203c903c | 515 | if (wl->bss_type == BSS_TYPE_AP_BSS) |
3618f30f AN |
516 | wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID | |
517 | INACTIVE_STA_EVENT_ID | | |
518 | MAX_TX_RETRY_EVENT_ID; | |
ae47c45f | 519 | else |
70559a06 SL |
520 | wl->event_mask |= DUMMY_PACKET_EVENT_ID | |
521 | BA_SESSION_RX_CONSTRAINT_EVENT_ID; | |
203c903c | 522 | |
f5fc0f86 LC |
523 | ret = wl1271_event_unmask(wl); |
524 | if (ret < 0) { | |
525 | wl1271_error("EVENT mask setting failed"); | |
526 | return ret; | |
527 | } | |
528 | ||
529 | wl1271_event_mbox_config(wl); | |
530 | ||
531 | /* firmware startup completed */ | |
532 | return 0; | |
533 | } | |
534 | ||
535 | static int wl1271_boot_write_irq_polarity(struct wl1271 *wl) | |
536 | { | |
e8768eeb | 537 | u32 polarity; |
f5fc0f86 | 538 | |
e8768eeb | 539 | polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY); |
f5fc0f86 LC |
540 | |
541 | /* We use HIGH polarity, so unset the LOW bit */ | |
542 | polarity &= ~POLARITY_LOW; | |
e8768eeb | 543 | wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity); |
f5fc0f86 LC |
544 | |
545 | return 0; | |
546 | } | |
547 | ||
d717fd61 JO |
548 | static void wl1271_boot_hw_version(struct wl1271 *wl) |
549 | { | |
550 | u32 fuse; | |
551 | ||
552 | fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1); | |
553 | fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET; | |
554 | ||
555 | wl->hw_pg_ver = (s8)fuse; | |
606ea9fa IY |
556 | |
557 | if (((wl->hw_pg_ver & PG_MAJOR_VER_MASK) >> PG_MAJOR_VER_OFFSET) < 3) | |
558 | wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION; | |
d717fd61 JO |
559 | } |
560 | ||
d29633b4 | 561 | static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl) |
f5fc0f86 | 562 | { |
d29633b4 | 563 | u16 spare_reg; |
5ea417ae | 564 | |
d29633b4 IY |
565 | /* Mask bits [2] & [8:4] in the sys_clk_cfg register */ |
566 | spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG); | |
567 | if (spare_reg == 0xFFFF) | |
568 | return -EFAULT; | |
569 | spare_reg |= (BIT(3) | BIT(5) | BIT(6)); | |
570 | wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg); | |
5ea417ae | 571 | |
d29633b4 IY |
572 | /* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */ |
573 | wl1271_top_reg_write(wl, SYS_CLK_CFG_REG, | |
574 | WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF); | |
5ea417ae | 575 | |
d29633b4 IY |
576 | /* Delay execution for 15msec, to let the HW settle */ |
577 | mdelay(15); | |
5ea417ae | 578 | |
d29633b4 IY |
579 | return 0; |
580 | } | |
5ea417ae | 581 | |
d29633b4 IY |
582 | static bool wl128x_is_tcxo_valid(struct wl1271 *wl) |
583 | { | |
584 | u16 tcxo_detection; | |
585 | ||
586 | tcxo_detection = wl1271_top_reg_read(wl, TCXO_CLK_DETECT_REG); | |
587 | if (tcxo_detection & TCXO_DET_FAILED) | |
588 | return false; | |
5ea417ae | 589 | |
d29633b4 | 590 | return true; |
5ea417ae SL |
591 | } |
592 | ||
d29633b4 | 593 | static bool wl128x_is_fref_valid(struct wl1271 *wl) |
5ea417ae | 594 | { |
d29633b4 | 595 | u16 fref_detection; |
5ea417ae | 596 | |
d29633b4 IY |
597 | fref_detection = wl1271_top_reg_read(wl, FREF_CLK_DETECT_REG); |
598 | if (fref_detection & FREF_CLK_DETECT_FAIL) | |
599 | return false; | |
5ea417ae | 600 | |
d29633b4 IY |
601 | return true; |
602 | } | |
5ea417ae | 603 | |
d29633b4 IY |
604 | static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl) |
605 | { | |
606 | wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL); | |
607 | wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL); | |
608 | wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL); | |
5ea417ae | 609 | |
d29633b4 IY |
610 | return 0; |
611 | } | |
5ea417ae | 612 | |
d29633b4 IY |
613 | static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk) |
614 | { | |
615 | u16 spare_reg; | |
616 | u16 pll_config; | |
617 | u8 input_freq; | |
618 | ||
619 | /* Mask bits [3:1] in the sys_clk_cfg register */ | |
620 | spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG); | |
621 | if (spare_reg == 0xFFFF) | |
622 | return -EFAULT; | |
623 | spare_reg |= BIT(2); | |
624 | wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg); | |
625 | ||
626 | /* Handle special cases of the TCXO clock */ | |
627 | if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 || | |
628 | wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6) | |
629 | return wl128x_manually_configure_mcs_pll(wl); | |
630 | ||
631 | /* Set the input frequency according to the selected clock source */ | |
632 | input_freq = (clk & 1) + 1; | |
633 | ||
634 | pll_config = wl1271_top_reg_read(wl, MCS_PLL_CONFIG_REG); | |
635 | if (pll_config == 0xFFFF) | |
636 | return -EFAULT; | |
637 | pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT); | |
638 | pll_config |= MCS_PLL_ENABLE_HP; | |
639 | wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config); | |
5ea417ae | 640 | |
d29633b4 IY |
641 | return 0; |
642 | } | |
643 | ||
644 | /* | |
645 | * WL128x has two clocks input - TCXO and FREF. | |
646 | * TCXO is the main clock of the device, while FREF is used to sync | |
647 | * between the GPS and the cellular modem. | |
648 | * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used | |
649 | * as the WLAN/BT main clock. | |
650 | */ | |
651 | static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock) | |
652 | { | |
653 | u16 sys_clk_cfg; | |
654 | ||
655 | /* For XTAL-only modes, FREF will be used after switching from TCXO */ | |
656 | if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL || | |
657 | wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) { | |
658 | if (!wl128x_switch_tcxo_to_fref(wl)) | |
659 | return -EINVAL; | |
660 | goto fref_clk; | |
5ea417ae SL |
661 | } |
662 | ||
d29633b4 IY |
663 | /* Query the HW, to determine which clock source we should use */ |
664 | sys_clk_cfg = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG); | |
665 | if (sys_clk_cfg == 0xFFFF) | |
666 | return -EINVAL; | |
667 | if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF) | |
668 | goto fref_clk; | |
669 | ||
670 | /* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */ | |
671 | if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 || | |
672 | wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) { | |
673 | if (!wl128x_switch_tcxo_to_fref(wl)) | |
674 | return -EINVAL; | |
675 | goto fref_clk; | |
676 | } | |
677 | ||
678 | /* TCXO clock is selected */ | |
679 | if (!wl128x_is_tcxo_valid(wl)) | |
680 | return -EINVAL; | |
681 | *selected_clock = wl->tcxo_clock; | |
682 | goto config_mcs_pll; | |
683 | ||
684 | fref_clk: | |
685 | /* FREF clock is selected */ | |
686 | if (!wl128x_is_fref_valid(wl)) | |
687 | return -EINVAL; | |
688 | *selected_clock = wl->ref_clock; | |
689 | ||
690 | config_mcs_pll: | |
691 | return wl128x_configure_mcs_pll(wl, *selected_clock); | |
5ea417ae SL |
692 | } |
693 | ||
694 | static int wl127x_boot_clk(struct wl1271 *wl) | |
695 | { | |
696 | u32 pause; | |
697 | u32 clk; | |
f5fc0f86 | 698 | |
d717fd61 JO |
699 | wl1271_boot_hw_version(wl); |
700 | ||
5ea417ae SL |
701 | if (wl->ref_clock == CONF_REF_CLK_19_2_E || |
702 | wl->ref_clock == CONF_REF_CLK_38_4_E || | |
703 | wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL) | |
284134eb | 704 | /* ref clk: 19.2/38.4/38.4-XTAL */ |
f5fc0f86 | 705 | clk = 0x3; |
5ea417ae SL |
706 | else if (wl->ref_clock == CONF_REF_CLK_26_E || |
707 | wl->ref_clock == CONF_REF_CLK_52_E) | |
f5fc0f86 LC |
708 | /* ref clk: 26/52 */ |
709 | clk = 0x5; | |
15cea993 OBC |
710 | else |
711 | return -EINVAL; | |
f5fc0f86 | 712 | |
5ea417ae | 713 | if (wl->ref_clock != CONF_REF_CLK_19_2_E) { |
284134eb | 714 | u16 val; |
9d4e5bb3 | 715 | /* Set clock type (open drain) */ |
284134eb JO |
716 | val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE); |
717 | val &= FREF_CLK_TYPE_BITS; | |
284134eb | 718 | wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val); |
9d4e5bb3 JO |
719 | |
720 | /* Set clock pull mode (no pull) */ | |
721 | val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL); | |
722 | val |= NO_PULL; | |
723 | wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val); | |
284134eb JO |
724 | } else { |
725 | u16 val; | |
726 | /* Set clock polarity */ | |
727 | val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY); | |
728 | val &= FREF_CLK_POLARITY_BITS; | |
729 | val |= CLK_REQ_OUTN_SEL; | |
730 | wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val); | |
731 | } | |
732 | ||
7b048c52 | 733 | wl1271_write32(wl, PLL_PARAMETERS, clk); |
f5fc0f86 | 734 | |
7b048c52 | 735 | pause = wl1271_read32(wl, PLL_PARAMETERS); |
f5fc0f86 LC |
736 | |
737 | wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause); | |
738 | ||
2f63b011 | 739 | pause &= ~(WU_COUNTER_PAUSE_VAL); |
f5fc0f86 | 740 | pause |= WU_COUNTER_PAUSE_VAL; |
7b048c52 | 741 | wl1271_write32(wl, WU_COUNTER_PAUSE, pause); |
f5fc0f86 | 742 | |
5ea417ae SL |
743 | return 0; |
744 | } | |
745 | ||
746 | /* uploads NVS and firmware */ | |
747 | int wl1271_load_firmware(struct wl1271 *wl) | |
748 | { | |
749 | int ret = 0; | |
750 | u32 tmp, clk; | |
d29633b4 | 751 | int selected_clock = -1; |
5ea417ae SL |
752 | |
753 | if (wl->chip.id == CHIP_ID_1283_PG20) { | |
d29633b4 | 754 | ret = wl128x_boot_clk(wl, &selected_clock); |
5ea417ae SL |
755 | if (ret < 0) |
756 | goto out; | |
757 | } else { | |
758 | ret = wl127x_boot_clk(wl); | |
759 | if (ret < 0) | |
760 | goto out; | |
761 | } | |
762 | ||
f5fc0f86 | 763 | /* Continue the ELP wake up sequence */ |
7b048c52 | 764 | wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); |
f5fc0f86 LC |
765 | udelay(500); |
766 | ||
451de97a | 767 | wl1271_set_partition(wl, &part_table[PART_DRPW]); |
f5fc0f86 LC |
768 | |
769 | /* Read-modify-write DRPW_SCRATCH_START register (see next state) | |
770 | to be used by DRPw FW. The RTRIM value will be added by the FW | |
771 | before taking DRPw out of reset */ | |
772 | ||
773 | wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START); | |
7b048c52 | 774 | clk = wl1271_read32(wl, DRPW_SCRATCH_START); |
f5fc0f86 LC |
775 | |
776 | wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); | |
777 | ||
5ea417ae | 778 | if (wl->chip.id == CHIP_ID_1283_PG20) { |
d29633b4 | 779 | clk |= ((selected_clock & 0x3) << 1) << 4; |
5ea417ae SL |
780 | } else { |
781 | clk |= (wl->ref_clock << 1) << 4; | |
782 | } | |
783 | ||
0c005048 SL |
784 | if (wl->quirks & WL12XX_QUIRK_LPD_MODE) |
785 | clk |= SCRATCH_ENABLE_LPD; | |
786 | ||
7b048c52 | 787 | wl1271_write32(wl, DRPW_SCRATCH_START, clk); |
f5fc0f86 | 788 | |
451de97a | 789 | wl1271_set_partition(wl, &part_table[PART_WORK]); |
f5fc0f86 LC |
790 | |
791 | /* Disable interrupts */ | |
7b048c52 | 792 | wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); |
f5fc0f86 LC |
793 | |
794 | ret = wl1271_boot_soft_reset(wl); | |
795 | if (ret < 0) | |
796 | goto out; | |
797 | ||
798 | /* 2. start processing NVS file */ | |
799 | ret = wl1271_boot_upload_nvs(wl); | |
800 | if (ret < 0) | |
801 | goto out; | |
802 | ||
803 | /* write firmware's last address (ie. it's length) to | |
804 | * ACX_EEPROMLESS_IND_REG */ | |
805 | wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG"); | |
806 | ||
7b048c52 | 807 | wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG); |
f5fc0f86 | 808 | |
7b048c52 | 809 | tmp = wl1271_read32(wl, CHIP_ID_B); |
f5fc0f86 LC |
810 | |
811 | wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); | |
812 | ||
813 | /* 6. read the EEPROM parameters */ | |
7b048c52 | 814 | tmp = wl1271_read32(wl, SCR_PAD2); |
f5fc0f86 | 815 | |
f5fc0f86 LC |
816 | /* WL1271: The reference driver skips steps 7 to 10 (jumps directly |
817 | * to upload_fw) */ | |
818 | ||
5ea417ae | 819 | if (wl->chip.id == CHIP_ID_1283_PG20) |
afb7d3cd | 820 | wl1271_top_reg_write(wl, SDIO_IO_DS, wl->conf.hci_io_ds); |
5ea417ae | 821 | |
f5fc0f86 LC |
822 | ret = wl1271_boot_upload_firmware(wl); |
823 | if (ret < 0) | |
824 | goto out; | |
825 | ||
870c367c RQ |
826 | out: |
827 | return ret; | |
828 | } | |
829 | EXPORT_SYMBOL_GPL(wl1271_load_firmware); | |
830 | ||
831 | int wl1271_boot(struct wl1271 *wl) | |
832 | { | |
833 | int ret; | |
834 | ||
835 | /* upload NVS and firmware */ | |
836 | ret = wl1271_load_firmware(wl); | |
837 | if (ret) | |
838 | return ret; | |
839 | ||
f5fc0f86 LC |
840 | /* 10.5 start firmware */ |
841 | ret = wl1271_boot_run_firmware(wl); | |
842 | if (ret < 0) | |
843 | goto out; | |
844 | ||
b9b0fdea SL |
845 | ret = wl1271_boot_write_irq_polarity(wl); |
846 | if (ret < 0) | |
847 | goto out; | |
848 | ||
849 | wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, | |
850 | WL1271_ACX_ALL_EVENTS_VECTOR); | |
851 | ||
eb5b28d0 JO |
852 | /* Enable firmware interrupts now */ |
853 | wl1271_boot_enable_interrupts(wl); | |
854 | ||
f5fc0f86 | 855 | /* set the wl1271 default filters */ |
ae113b57 | 856 | wl1271_set_default_filters(wl); |
f5fc0f86 LC |
857 | |
858 | wl1271_event_mbox_config(wl); | |
859 | ||
860 | out: | |
861 | return ret; | |
862 | } |