Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * Copyright (C) 2002 Intersil Americas Inc. |
3 | * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License as published by | |
7 | * the Free Software Foundation; either version 2 of the License | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | * GNU General Public License for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
4280db9d | 15 | * along with this program; if not, see <http://www.gnu.org/licenses/>. |
1da177e4 LT |
16 | * |
17 | */ | |
18 | ||
a6b7a407 | 19 | #include <linux/interrupt.h> |
1da177e4 LT |
20 | #include <linux/module.h> |
21 | #include <linux/pci.h> | |
22 | #include <linux/delay.h> | |
23 | #include <linux/init.h> /* For __init, __exit */ | |
910638ae | 24 | #include <linux/dma-mapping.h> |
1da177e4 LT |
25 | |
26 | #include "prismcompat.h" | |
27 | #include "islpci_dev.h" | |
28 | #include "islpci_mgt.h" /* for pc_debug */ | |
29 | #include "isl_oid.h" | |
30 | ||
1da177e4 LT |
31 | MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>"); |
32 | MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter"); | |
33 | MODULE_LICENSE("GPL"); | |
34 | ||
35 | static int init_pcitm = 0; | |
36 | module_param(init_pcitm, int, 0); | |
37 | ||
38 | /* In this order: vendor, device, subvendor, subdevice, class, class_mask, | |
93b2dd12 DT |
39 | * driver_data |
40 | * If you have an update for this please contact prism54-devel@prism54.org | |
631dd1a8 | 41 | * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */ |
a3aa1884 | 42 | static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = { |
1da177e4 LT |
43 | /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ |
44 | { | |
45 | 0x1260, 0x3890, | |
46 | PCI_ANY_ID, PCI_ANY_ID, | |
47 | 0, 0, 0 | |
48 | }, | |
49 | ||
50 | /* 3COM 3CRWE154G72 Wireless LAN adapter */ | |
51 | { | |
8ab0ea77 | 52 | PCI_VDEVICE(3COM, 0x6001), 0 |
1da177e4 LT |
53 | }, |
54 | ||
55 | /* Intersil PRISM Indigo Wireless LAN adapter */ | |
56 | { | |
57 | 0x1260, 0x3877, | |
58 | PCI_ANY_ID, PCI_ANY_ID, | |
59 | 0, 0, 0 | |
60 | }, | |
61 | ||
62 | /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */ | |
63 | { | |
64 | 0x1260, 0x3886, | |
65 | PCI_ANY_ID, PCI_ANY_ID, | |
66 | 0, 0, 0 | |
67 | }, | |
68 | ||
69 | /* End of list */ | |
70 | {0,0,0,0,0,0,0} | |
71 | }; | |
72 | ||
73 | /* register the device with the Hotplug facilities of the kernel */ | |
74 | MODULE_DEVICE_TABLE(pci, prism54_id_tbl); | |
75 | ||
76 | static int prism54_probe(struct pci_dev *, const struct pci_device_id *); | |
77 | static void prism54_remove(struct pci_dev *); | |
05adc3b7 | 78 | static int prism54_suspend(struct pci_dev *, pm_message_t state); |
1da177e4 LT |
79 | static int prism54_resume(struct pci_dev *); |
80 | ||
81 | static struct pci_driver prism54_driver = { | |
82 | .name = DRV_NAME, | |
83 | .id_table = prism54_id_tbl, | |
84 | .probe = prism54_probe, | |
85 | .remove = prism54_remove, | |
86 | .suspend = prism54_suspend, | |
87 | .resume = prism54_resume, | |
1da177e4 LT |
88 | }; |
89 | ||
90 | /****************************************************************************** | |
91 | Module initialization functions | |
92 | ******************************************************************************/ | |
93 | ||
6dd01480 | 94 | static int |
1da177e4 LT |
95 | prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
96 | { | |
97 | struct net_device *ndev; | |
98 | u8 latency_tmr; | |
99 | u32 mem_addr; | |
100 | islpci_private *priv; | |
101 | int rvalue; | |
102 | ||
103 | /* Enable the pci device */ | |
104 | if (pci_enable_device(pdev)) { | |
105 | printk(KERN_ERR "%s: pci_enable_device() failed.\n", DRV_NAME); | |
106 | return -ENODEV; | |
107 | } | |
108 | ||
109 | /* check whether the latency timer is set correctly */ | |
110 | pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_tmr); | |
111 | #if VERBOSE > SHOW_ERROR_MESSAGES | |
112 | DEBUG(SHOW_TRACING, "latency timer: %x\n", latency_tmr); | |
113 | #endif | |
114 | if (latency_tmr < PCIDEVICE_LATENCY_TIMER_MIN) { | |
115 | /* set the latency timer */ | |
116 | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, | |
117 | PCIDEVICE_LATENCY_TIMER_VAL); | |
118 | } | |
119 | ||
120 | /* enable PCI DMA */ | |
284901a9 | 121 | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { |
1da177e4 LT |
122 | printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME); |
123 | goto do_pci_disable_device; | |
124 | } | |
125 | ||
126 | /* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT) | |
127 | * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT) | |
93b2dd12 DT |
128 | * The RETRY_TIMEOUT is used to set the number of retries that the core, as a |
129 | * Master, will perform before abandoning a cycle. The default value for | |
130 | * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new | |
131 | * devices. A write of zero to the RETRY_TIMEOUT register disables this | |
132 | * function to allow use with any non-compliant legacy devices that may | |
133 | * execute more retries. | |
1da177e4 | 134 | * |
93b2dd12 DT |
135 | * Writing zero to both these two registers will disable both timeouts and |
136 | * *can* solve problems caused by devices that are slow to respond. | |
1da177e4 LT |
137 | * Make this configurable - MSW |
138 | */ | |
139 | if ( init_pcitm >= 0 ) { | |
140 | pci_write_config_byte(pdev, 0x40, (u8)init_pcitm); | |
141 | pci_write_config_byte(pdev, 0x41, (u8)init_pcitm); | |
142 | } else { | |
143 | printk(KERN_INFO "PCI TRDY/RETRY unchanged\n"); | |
144 | } | |
145 | ||
146 | /* request the pci device I/O regions */ | |
147 | rvalue = pci_request_regions(pdev, DRV_NAME); | |
148 | if (rvalue) { | |
149 | printk(KERN_ERR "%s: pci_request_regions failure (rc=%d)\n", | |
150 | DRV_NAME, rvalue); | |
151 | goto do_pci_disable_device; | |
152 | } | |
153 | ||
154 | /* check if the memory window is indeed set */ | |
155 | rvalue = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &mem_addr); | |
156 | if (rvalue || !mem_addr) { | |
157 | printk(KERN_ERR "%s: PCI device memory region not configured; fix your BIOS or CardBus bridge/drivers\n", | |
158 | DRV_NAME); | |
159 | goto do_pci_release_regions; | |
160 | } | |
161 | ||
162 | /* enable PCI bus-mastering */ | |
163 | DEBUG(SHOW_TRACING, "%s: pci_set_master(pdev)\n", DRV_NAME); | |
164 | pci_set_master(pdev); | |
165 | ||
166 | /* enable MWI */ | |
694625c0 | 167 | pci_try_set_mwi(pdev); |
1da177e4 LT |
168 | |
169 | /* setup the network device interface and its structure */ | |
170 | if (!(ndev = islpci_setup(pdev))) { | |
171 | /* error configuring the driver as a network device */ | |
172 | printk(KERN_ERR "%s: could not configure network device\n", | |
173 | DRV_NAME); | |
02e0e5e9 | 174 | goto do_pci_clear_mwi; |
1da177e4 LT |
175 | } |
176 | ||
177 | priv = netdev_priv(ndev); | |
178 | islpci_set_state(priv, PRV_STATE_PREBOOT); /* we are attempting to boot */ | |
179 | ||
180 | /* card is in unknown state yet, might have some interrupts pending */ | |
181 | isl38xx_disable_interrupts(priv->device_base); | |
182 | ||
183 | /* request for the interrupt before uploading the firmware */ | |
a0607fd3 | 184 | rvalue = request_irq(pdev->irq, islpci_interrupt, |
1fb9df5d | 185 | IRQF_SHARED, ndev->name, priv); |
1da177e4 LT |
186 | |
187 | if (rvalue) { | |
188 | /* error, could not hook the handler to the irq */ | |
189 | printk(KERN_ERR "%s: could not install IRQ handler\n", | |
190 | ndev->name); | |
191 | goto do_unregister_netdev; | |
192 | } | |
193 | ||
194 | /* firmware upload is triggered in islpci_open */ | |
195 | ||
196 | return 0; | |
197 | ||
198 | do_unregister_netdev: | |
199 | unregister_netdev(ndev); | |
200 | islpci_free_memory(priv); | |
1da177e4 LT |
201 | free_netdev(ndev); |
202 | priv = NULL; | |
02e0e5e9 JL |
203 | do_pci_clear_mwi: |
204 | pci_clear_mwi(pdev); | |
1da177e4 LT |
205 | do_pci_release_regions: |
206 | pci_release_regions(pdev); | |
207 | do_pci_disable_device: | |
208 | pci_disable_device(pdev); | |
209 | return -EIO; | |
210 | } | |
211 | ||
212 | /* set by cleanup_module */ | |
213 | static volatile int __in_cleanup_module = 0; | |
214 | ||
215 | /* this one removes one(!!) instance only */ | |
6dd01480 | 216 | static void |
1da177e4 LT |
217 | prism54_remove(struct pci_dev *pdev) |
218 | { | |
219 | struct net_device *ndev = pci_get_drvdata(pdev); | |
220 | islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; | |
221 | BUG_ON(!priv); | |
222 | ||
223 | if (!__in_cleanup_module) { | |
224 | printk(KERN_DEBUG "%s: hot unplug detected\n", ndev->name); | |
225 | islpci_set_state(priv, PRV_STATE_OFF); | |
226 | } | |
227 | ||
228 | printk(KERN_DEBUG "%s: removing device\n", ndev->name); | |
229 | ||
230 | unregister_netdev(ndev); | |
231 | ||
232 | /* free the interrupt request */ | |
233 | ||
234 | if (islpci_get_state(priv) != PRV_STATE_OFF) { | |
235 | isl38xx_disable_interrupts(priv->device_base); | |
236 | islpci_set_state(priv, PRV_STATE_OFF); | |
237 | /* This bellow causes a lockup at rmmod time. It might be | |
93b2dd12 | 238 | * because some interrupts still linger after rmmod time, |
1da177e4 LT |
239 | * see bug #17 */ |
240 | /* pci_set_power_state(pdev, 3);*/ /* try to power-off */ | |
241 | } | |
242 | ||
243 | free_irq(pdev->irq, priv); | |
244 | ||
245 | /* free the PCI memory and unmap the remapped page */ | |
246 | islpci_free_memory(priv); | |
247 | ||
1da177e4 LT |
248 | free_netdev(ndev); |
249 | priv = NULL; | |
250 | ||
02e0e5e9 JL |
251 | pci_clear_mwi(pdev); |
252 | ||
1da177e4 LT |
253 | pci_release_regions(pdev); |
254 | ||
255 | pci_disable_device(pdev); | |
256 | } | |
257 | ||
6dd01480 | 258 | static int |
05adc3b7 | 259 | prism54_suspend(struct pci_dev *pdev, pm_message_t state) |
1da177e4 LT |
260 | { |
261 | struct net_device *ndev = pci_get_drvdata(pdev); | |
262 | islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; | |
263 | BUG_ON(!priv); | |
264 | ||
1da177e4 LT |
265 | |
266 | pci_save_state(pdev); | |
267 | ||
268 | /* tell the device not to trigger interrupts for now... */ | |
269 | isl38xx_disable_interrupts(priv->device_base); | |
270 | ||
271 | /* from now on assume the hardware was already powered down | |
272 | and don't touch it anymore */ | |
273 | islpci_set_state(priv, PRV_STATE_OFF); | |
274 | ||
275 | netif_stop_queue(ndev); | |
276 | netif_device_detach(ndev); | |
277 | ||
278 | return 0; | |
279 | } | |
280 | ||
6dd01480 | 281 | static int |
1da177e4 LT |
282 | prism54_resume(struct pci_dev *pdev) |
283 | { | |
284 | struct net_device *ndev = pci_get_drvdata(pdev); | |
285 | islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; | |
02e0e5e9 | 286 | int err; |
1da177e4 | 287 | |
02e0e5e9 | 288 | BUG_ON(!priv); |
1da177e4 LT |
289 | |
290 | printk(KERN_NOTICE "%s: got resume request\n", ndev->name); | |
291 | ||
02e0e5e9 JL |
292 | err = pci_enable_device(pdev); |
293 | if (err) { | |
294 | printk(KERN_ERR "%s: pci_enable_device failed on resume\n", | |
295 | ndev->name); | |
296 | return err; | |
297 | } | |
298 | ||
1da177e4 LT |
299 | pci_restore_state(pdev); |
300 | ||
301 | /* alright let's go into the PREBOOT state */ | |
302 | islpci_reset(priv, 1); | |
303 | ||
304 | netif_device_attach(ndev); | |
305 | netif_start_queue(ndev); | |
306 | ||
307 | return 0; | |
308 | } | |
309 | ||
310 | static int __init | |
311 | prism54_module_init(void) | |
312 | { | |
313 | printk(KERN_INFO "Loaded %s driver, version %s\n", | |
314 | DRV_NAME, DRV_VERSION); | |
315 | ||
316 | __bug_on_wrong_struct_sizes (); | |
317 | ||
29917620 | 318 | return pci_register_driver(&prism54_driver); |
1da177e4 LT |
319 | } |
320 | ||
321 | /* by the time prism54_module_exit() terminates, as a postcondition | |
322 | * all instances will have been destroyed by calls to | |
323 | * prism54_remove() */ | |
324 | static void __exit | |
325 | prism54_module_exit(void) | |
326 | { | |
327 | __in_cleanup_module = 1; | |
328 | ||
329 | pci_unregister_driver(&prism54_driver); | |
330 | ||
331 | printk(KERN_INFO "Unloaded %s driver\n", DRV_NAME); | |
332 | ||
333 | __in_cleanup_module = 0; | |
334 | } | |
335 | ||
336 | /* register entry points */ | |
337 | module_init(prism54_module_init); | |
338 | module_exit(prism54_module_exit); | |
339 | /* EOF */ |