Commit | Line | Data |
---|---|---|
6f83eaa1 TW |
1 | /****************************************************************************** |
2 | * | |
3 | * This file is provided under a dual BSD/GPLv2 license. When using or | |
4 | * redistributing this file, you may do so under either license. | |
5 | * | |
6 | * GPL LICENSE SUMMARY | |
7 | * | |
01f8162a | 8 | * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved. |
6f83eaa1 TW |
9 | * |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of version 2 of the GNU General Public License as | |
12 | * published by the Free Software Foundation. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, but | |
15 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
17 | * General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | |
22 | * USA | |
23 | * | |
24 | * The full GNU General Public License is included in this distribution | |
25 | * in the file called LICENSE.GPL. | |
26 | * | |
27 | * Contact Information: | |
759ef89f | 28 | * Intel Linux Wireless <ilw@linux.intel.com> |
6f83eaa1 TW |
29 | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
30 | * | |
31 | * BSD LICENSE | |
32 | * | |
01f8162a | 33 | * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved. |
6f83eaa1 TW |
34 | * All rights reserved. |
35 | * | |
36 | * Redistribution and use in source and binary forms, with or without | |
37 | * modification, are permitted provided that the following conditions | |
38 | * are met: | |
39 | * | |
40 | * * Redistributions of source code must retain the above copyright | |
41 | * notice, this list of conditions and the following disclaimer. | |
42 | * * Redistributions in binary form must reproduce the above copyright | |
43 | * notice, this list of conditions and the following disclaimer in | |
44 | * the documentation and/or other materials provided with the | |
45 | * distribution. | |
46 | * * Neither the name Intel Corporation nor the names of its | |
47 | * contributors may be used to endorse or promote products derived | |
48 | * from this software without specific prior written permission. | |
49 | * | |
50 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
51 | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
52 | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
53 | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
54 | * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
55 | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
56 | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
57 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
58 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
59 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
60 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
61 | * | |
62 | *****************************************************************************/ | |
65a0667b TW |
63 | #ifndef __iwl_csr_h__ |
64 | #define __iwl_csr_h__ | |
9e595d24 BC |
65 | /* |
66 | * CSR (control and status registers) | |
67 | * | |
68 | * CSR registers are mapped directly into PCI bus space, and are accessible | |
69 | * whenever platform supplies power to device, even when device is in | |
70 | * low power states due to driver-invoked device resets | |
71 | * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes. | |
72 | * | |
73 | * Use iwl_write32() and iwl_read32() family to access these registers; | |
74 | * these provide simple PCI bus access, without waking up the MAC. | |
75 | * Do not use iwl_write_direct32() family for these registers; | |
76 | * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ. | |
77 | * The MAC (uCode processor, etc.) does not need to be powered up for accessing | |
78 | * the CSR registers. | |
79 | * | |
f8701fe3 | 80 | * NOTE: Device does need to be awake in order to read this memory |
9e595d24 BC |
81 | * via CSR_EEPROM and CSR_OTP registers |
82 | */ | |
6f83eaa1 TW |
83 | #define CSR_BASE (0x000) |
84 | ||
85 | #define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */ | |
9e595d24 | 86 | #define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */ |
6f83eaa1 TW |
87 | #define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */ |
88 | #define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */ | |
89 | #define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/ | |
90 | #define CSR_GPIO_IN (CSR_BASE+0x018) /* read external chip pins */ | |
91 | #define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/ | |
92 | #define CSR_GP_CNTRL (CSR_BASE+0x024) | |
93 | ||
9e595d24 BC |
94 | /* 2nd byte of CSR_INT_COALESCING, not accessible via iwl_write32()! */ |
95 | #define CSR_INT_PERIODIC_REG (CSR_BASE+0x005) | |
96 | ||
6f83eaa1 TW |
97 | /* |
98 | * Hardware revision info | |
99 | * Bit fields: | |
100 | * 31-8: Reserved | |
9e595d24 | 101 | * 7-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions |
6f83eaa1 | 102 | * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D |
9e595d24 | 103 | * 1-0: "Dash" (-) value, as in A-1, etc. |
6f83eaa1 TW |
104 | * |
105 | * NOTE: Revision step affects calculation of CCK txpower for 4965. | |
9e595d24 | 106 | * NOTE: See also CSR_HW_REV_WA_REG (work-around for bug in 4965). |
6f83eaa1 TW |
107 | */ |
108 | #define CSR_HW_REV (CSR_BASE+0x028) | |
109 | ||
9e595d24 BC |
110 | /* |
111 | * EEPROM and OTP (one-time-programmable) memory reads | |
112 | * | |
f8701fe3 RC |
113 | * NOTE: Device must be awake, initialized via apm_ops.init(), |
114 | * in order to read. | |
9e595d24 | 115 | */ |
6f83eaa1 TW |
116 | #define CSR_EEPROM_REG (CSR_BASE+0x02c) |
117 | #define CSR_EEPROM_GP (CSR_BASE+0x030) | |
0848e297 | 118 | #define CSR_OTP_GP_REG (CSR_BASE+0x034) |
9e595d24 | 119 | |
8f061891 | 120 | #define CSR_GIO_REG (CSR_BASE+0x03C) |
65b7998a WYG |
121 | #define CSR_GP_UCODE_REG (CSR_BASE+0x048) |
122 | #define CSR_GP_DRIVER_REG (CSR_BASE+0x050) | |
9e595d24 BC |
123 | |
124 | /* | |
125 | * UCODE-DRIVER GP (general purpose) mailbox registers. | |
126 | * SET/CLR registers set/clear bit(s) if "1" is written. | |
127 | */ | |
6f83eaa1 TW |
128 | #define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054) |
129 | #define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058) | |
130 | #define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c) | |
131 | #define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060) | |
9e595d24 | 132 | |
ab53d8af | 133 | #define CSR_LED_REG (CSR_BASE+0x094) |
ef850d7c | 134 | #define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0) |
9e595d24 BC |
135 | |
136 | /* GIO Chicken Bits (PCI Express bus link power management) */ | |
8f061891 | 137 | #define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) |
6f83eaa1 | 138 | |
a693f187 | 139 | /* Analog phase-lock-loop configuration */ |
6f83eaa1 | 140 | #define CSR_ANA_PLL_CFG (CSR_BASE+0x20c) |
9e595d24 | 141 | |
6f83eaa1 | 142 | /* |
9e595d24 BC |
143 | * CSR Hardware Revision Workaround Register. Indicates hardware rev; |
144 | * "step" determines CCK backoff for txpower calculation. Used for 4965 only. | |
145 | * See also CSR_HW_REV register. | |
6f83eaa1 TW |
146 | * Bit fields: |
147 | * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step | |
9e595d24 | 148 | * 1-0: "Dash" (-) value, as in C-1, etc. |
6f83eaa1 | 149 | */ |
32004ee4 | 150 | #define CSR_HW_REV_WA_REG (CSR_BASE+0x22C) |
9e595d24 | 151 | |
32004ee4 WYG |
152 | #define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240) |
153 | #define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250) | |
6f83eaa1 TW |
154 | |
155 | /* Bits for CSR_HW_IF_CONFIG_REG */ | |
156 | #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) | |
a395b920 TW |
157 | #define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) |
158 | #define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) | |
159 | #define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) | |
6f83eaa1 TW |
160 | |
161 | #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100) | |
162 | #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200) | |
163 | #define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC (0x00000400) | |
164 | #define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE (0x00000800) | |
165 | #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000) | |
166 | #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000) | |
167 | ||
9e595d24 BC |
168 | #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) |
169 | #define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) | |
170 | #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */ | |
171 | #define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */ | |
172 | #define CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */ | |
4c43e0d0 | 173 | |
74ba67ed BC |
174 | #define CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/ |
175 | #define CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/ | |
6f83eaa1 TW |
176 | |
177 | /* interrupt flags in INTA, set by uCode or hardware (e.g. dma), | |
178 | * acknowledged (reset) by host writing "1" to flagged bits. */ | |
179 | #define CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */ | |
180 | #define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */ | |
40cefda9 | 181 | #define CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */ |
6f83eaa1 TW |
182 | #define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */ |
183 | #define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */ | |
184 | #define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */ | |
185 | #define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */ | |
186 | #define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */ | |
187 | #define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses, 3945 */ | |
188 | #define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */ | |
189 | #define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */ | |
190 | ||
191 | #define CSR_INI_SET_MASK (CSR_INT_BIT_FH_RX | \ | |
192 | CSR_INT_BIT_HW_ERR | \ | |
193 | CSR_INT_BIT_FH_TX | \ | |
194 | CSR_INT_BIT_SW_ERR | \ | |
195 | CSR_INT_BIT_RF_KILL | \ | |
196 | CSR_INT_BIT_SW_RX | \ | |
197 | CSR_INT_BIT_WAKEUP | \ | |
198 | CSR_INT_BIT_ALIVE) | |
199 | ||
200 | /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */ | |
201 | #define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */ | |
202 | #define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */ | |
203 | #define CSR39_FH_INT_BIT_RX_CHNL2 (1 << 18) /* Rx channel 2 (3945 only) */ | |
204 | #define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */ | |
205 | #define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */ | |
206 | #define CSR39_FH_INT_BIT_TX_CHNL6 (1 << 6) /* Tx channel 6 (3945 only) */ | |
207 | #define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */ | |
208 | #define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */ | |
209 | ||
210 | #define CSR39_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ | |
211 | CSR39_FH_INT_BIT_RX_CHNL2 | \ | |
212 | CSR_FH_INT_BIT_RX_CHNL1 | \ | |
213 | CSR_FH_INT_BIT_RX_CHNL0) | |
214 | ||
215 | ||
216 | #define CSR39_FH_INT_TX_MASK (CSR39_FH_INT_BIT_TX_CHNL6 | \ | |
217 | CSR_FH_INT_BIT_TX_CHNL1 | \ | |
218 | CSR_FH_INT_BIT_TX_CHNL0) | |
219 | ||
220 | #define CSR49_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ | |
221 | CSR_FH_INT_BIT_RX_CHNL1 | \ | |
222 | CSR_FH_INT_BIT_RX_CHNL0) | |
223 | ||
224 | #define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ | |
225 | CSR_FH_INT_BIT_TX_CHNL0) | |
226 | ||
6f4083aa TW |
227 | /* GPIO */ |
228 | #define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) | |
229 | #define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) | |
230 | #define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) | |
6f83eaa1 TW |
231 | |
232 | /* RESET */ | |
233 | #define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) | |
234 | #define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002) | |
235 | #define CSR_RESET_REG_FLAG_SW_RESET (0x00000080) | |
236 | #define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100) | |
237 | #define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200) | |
32004ee4 | 238 | #define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000) |
6f83eaa1 | 239 | |
9e595d24 BC |
240 | /* |
241 | * GP (general purpose) CONTROL REGISTER | |
242 | * Bit fields: | |
243 | * 27: HW_RF_KILL_SW | |
244 | * Indicates state of (platform's) hardware RF-Kill switch | |
245 | * 26-24: POWER_SAVE_TYPE | |
246 | * Indicates current power-saving mode: | |
247 | * 000 -- No power saving | |
248 | * 001 -- MAC power-down | |
249 | * 010 -- PHY (radio) power-down | |
250 | * 011 -- Error | |
251 | * 9-6: SYS_CONFIG | |
252 | * Indicates current system configuration, reflecting pins on chip | |
253 | * as forced high/low by device circuit board. | |
254 | * 4: GOING_TO_SLEEP | |
255 | * Indicates MAC is entering a power-saving sleep power-down. | |
256 | * Not a good time to access device-internal resources. | |
257 | * 3: MAC_ACCESS_REQ | |
258 | * Host sets this to request and maintain MAC wakeup, to allow host | |
259 | * access to device-internal resources. Host must wait for | |
260 | * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR | |
261 | * device registers. | |
262 | * 2: INIT_DONE | |
263 | * Host sets this to put device into fully operational D0 power mode. | |
264 | * Host resets this after SW_RESET to put device into low power mode. | |
265 | * 0: MAC_CLOCK_READY | |
266 | * Indicates MAC (ucode processor, etc.) is powered up and can run. | |
267 | * Internal resources are accessible. | |
268 | * NOTE: This does not indicate that the processor is actually running. | |
269 | * NOTE: This does not indicate that 4965 or 3945 has completed | |
270 | * init or post-power-down restore of internal SRAM memory. | |
271 | * Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that | |
272 | * SRAM is restored and uCode is in normal operation mode. | |
273 | * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and | |
274 | * do not need to save/restore it. | |
275 | * NOTE: After device reset, this bit remains "0" until host sets | |
276 | * INIT_DONE | |
277 | */ | |
6f83eaa1 TW |
278 | #define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001) |
279 | #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004) | |
280 | #define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008) | |
281 | #define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010) | |
282 | ||
283 | #define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001) | |
284 | ||
285 | #define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000) | |
286 | #define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000) | |
287 | #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) | |
288 | ||
289 | ||
b661c819 TW |
290 | /* HW REV */ |
291 | #define CSR_HW_REV_TYPE_MSK (0x00000F0) | |
292 | #define CSR_HW_REV_TYPE_3945 (0x00000D0) | |
293 | #define CSR_HW_REV_TYPE_4965 (0x0000000) | |
fcf623df TW |
294 | #define CSR_HW_REV_TYPE_5300 (0x0000020) |
295 | #define CSR_HW_REV_TYPE_5350 (0x0000030) | |
296 | #define CSR_HW_REV_TYPE_5100 (0x0000050) | |
297 | #define CSR_HW_REV_TYPE_5150 (0x0000040) | |
77dcb6a9 | 298 | #define CSR_HW_REV_TYPE_1000 (0x0000060) |
2264596d JS |
299 | #define CSR_HW_REV_TYPE_6x00 (0x0000070) |
300 | #define CSR_HW_REV_TYPE_6x50 (0x0000080) | |
fcf623df | 301 | #define CSR_HW_REV_TYPE_NONE (0x00000F0) |
b661c819 | 302 | |
6f83eaa1 TW |
303 | /* EEPROM REG */ |
304 | #define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) | |
305 | #define CSR_EEPROM_REG_BIT_CMD (0x00000002) | |
3d5717ad ZY |
306 | #define CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC) |
307 | #define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) | |
6f83eaa1 TW |
308 | |
309 | /* EEPROM GP */ | |
9e595d24 | 310 | #define CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */ |
6f83eaa1 | 311 | #define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) |
9e595d24 BC |
312 | #define CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP (0x00000000) |
313 | #define CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP (0x00000001) | |
314 | #define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002) | |
315 | #define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004) | |
316 | ||
317 | /* One-time-programmable memory general purpose reg */ | |
0848e297 WYG |
318 | #define CSR_OTP_GP_REG_DEVICE_SELECT (0x00010000) /* 0 - EEPROM, 1 - OTP */ |
319 | #define CSR_OTP_GP_REG_OTP_ACCESS_MODE (0x00020000) /* 0 - absolute, 1 - relative */ | |
320 | #define CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK (0x00100000) /* bit 20 */ | |
321 | #define CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK (0x00200000) /* bit 21 */ | |
9e595d24 BC |
322 | |
323 | /* GP REG */ | |
c09430ab WYG |
324 | #define CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */ |
325 | #define CSR_GP_REG_NO_POWER_SAVE (0x00000000) | |
326 | #define CSR_GP_REG_MAC_POWER_SAVE (0x01000000) | |
327 | #define CSR_GP_REG_PHY_POWER_SAVE (0x02000000) | |
328 | #define CSR_GP_REG_POWER_SAVE_ERROR (0x03000000) | |
6f83eaa1 | 329 | |
f41bb897 | 330 | |
8f061891 TW |
331 | /* CSR GIO */ |
332 | #define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002) | |
333 | ||
9e595d24 BC |
334 | /* |
335 | * UCODE-DRIVER GP (general purpose) mailbox register 1 | |
336 | * Host driver and uCode write and/or read this register to communicate with | |
337 | * each other. | |
338 | * Bit fields: | |
339 | * 4: UCODE_DISABLE | |
340 | * Host sets this to request permanent halt of uCode, same as | |
341 | * sending CARD_STATE command with "halt" bit set. | |
342 | * 3: CT_KILL_EXIT | |
343 | * Host sets this to request exit from CT_KILL state, i.e. host thinks | |
344 | * device temperature is low enough to continue normal operation. | |
345 | * 2: CMD_BLOCKED | |
346 | * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL) | |
347 | * to release uCode to clear all Tx and command queues, enter | |
348 | * unassociated mode, and power down. | |
349 | * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit. | |
350 | * 1: SW_BIT_RFKILL | |
351 | * Host sets this when issuing CARD_STATE command to request | |
352 | * device sleep. | |
353 | * 0: MAC_SLEEP | |
354 | * uCode sets this when preparing a power-saving power-down. | |
355 | * uCode resets this when power-up is complete and SRAM is sane. | |
356 | * NOTE: 3945/4965 saves internal SRAM data to host when powering down, | |
357 | * and must restore this data after powering back up. | |
358 | * MAC_SLEEP is the best indication that restore is complete. | |
359 | * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and | |
360 | * do not need to save/restore it. | |
361 | */ | |
6f83eaa1 TW |
362 | #define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) |
363 | #define CSR_UCODE_SW_BIT_RFKILL (0x00000002) | |
364 | #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) | |
365 | #define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) | |
366 | ||
65b7998a WYG |
367 | /* GP Driver */ |
368 | #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_MSK (0x00000003) | |
369 | #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB (0x00000000) | |
370 | #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB (0x00000001) | |
371 | #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA (0x00000002) | |
372 | ||
373 | ||
9e595d24 | 374 | /* GIO Chicken Bits (PCI Express bus link power management) */ |
6f83eaa1 TW |
375 | #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) |
376 | #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) | |
377 | ||
ab53d8af MA |
378 | /* LED */ |
379 | #define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF) | |
380 | #define CSR_LED_REG_TRUN_ON (0x78) | |
381 | #define CSR_LED_REG_TRUN_OFF (0x38) | |
382 | ||
a693f187 TW |
383 | /* ANA_PLL */ |
384 | #define CSR39_ANA_PLL_CFG_VAL (0x01000000) | |
385 | #define CSR50_ANA_PLL_CFG_VAL (0x00880300) | |
386 | ||
4c43e0d0 TW |
387 | /* HPET MEM debug */ |
388 | #define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) | |
ef850d7c MA |
389 | |
390 | /* DRAM INT TABLE */ | |
391 | #define CSR_DRAM_INT_TBL_ENABLE (1 << 31) | |
392 | #define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27) | |
393 | ||
9e595d24 BC |
394 | /* |
395 | * HBUS (Host-side Bus) | |
396 | * | |
397 | * HBUS registers are mapped directly into PCI bus space, but are used | |
398 | * to indirectly access device's internal memory or registers that | |
399 | * may be powered-down. | |
400 | * | |
401 | * Use iwl_write_direct32()/iwl_read_direct32() family for these registers; | |
402 | * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ | |
403 | * to make sure the MAC (uCode processor, etc.) is powered up for accessing | |
404 | * internal resources. | |
405 | * | |
406 | * Do not use iwl_write32()/iwl_read32() family to access these registers; | |
407 | * these provide only simple PCI bus access, without waking up the MAC. | |
408 | */ | |
750fe639 | 409 | #define HBUS_BASE (0x400) |
9e595d24 | 410 | |
750fe639 TW |
411 | /* |
412 | * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM | |
413 | * structures, error log, event log, verifying uCode load). | |
414 | * First write to address register, then read from or write to data register | |
415 | * to complete the job. Once the address register is set up, accesses to | |
416 | * data registers auto-increment the address by one dword. | |
417 | * Bit usage for address registers (read or write): | |
418 | * 0-31: memory address within device | |
419 | */ | |
420 | #define HBUS_TARG_MEM_RADDR (HBUS_BASE+0x00c) | |
421 | #define HBUS_TARG_MEM_WADDR (HBUS_BASE+0x010) | |
422 | #define HBUS_TARG_MEM_WDAT (HBUS_BASE+0x018) | |
423 | #define HBUS_TARG_MEM_RDAT (HBUS_BASE+0x01c) | |
424 | ||
9e595d24 BC |
425 | /* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */ |
426 | #define HBUS_TARG_MBX_C (HBUS_BASE+0x030) | |
427 | #define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004) | |
428 | ||
750fe639 TW |
429 | /* |
430 | * Registers for accessing device's internal peripheral registers | |
431 | * (e.g. SCD, BSM, etc.). First write to address register, | |
432 | * then read from or write to data register to complete the job. | |
433 | * Bit usage for address registers (read or write): | |
434 | * 0-15: register address (offset) within device | |
435 | * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword) | |
436 | */ | |
437 | #define HBUS_TARG_PRPH_WADDR (HBUS_BASE+0x044) | |
438 | #define HBUS_TARG_PRPH_RADDR (HBUS_BASE+0x048) | |
439 | #define HBUS_TARG_PRPH_WDAT (HBUS_BASE+0x04c) | |
440 | #define HBUS_TARG_PRPH_RDAT (HBUS_BASE+0x050) | |
441 | ||
442 | /* | |
9e595d24 | 443 | * Per-Tx-queue write pointer (index, really!) |
750fe639 TW |
444 | * Indicates index to next TFD that driver will fill (1 past latest filled). |
445 | * Bit usage: | |
446 | * 0-7: queue write index | |
447 | * 11-8: queue selector | |
448 | */ | |
449 | #define HBUS_TARG_WRPTR (HBUS_BASE+0x060) | |
750fe639 | 450 | |
65a0667b | 451 | #endif /* !__iwl_csr_h__ */ |