Commit | Line | Data |
---|---|---|
f078f209 LR |
1 | /* |
2 | * Copyright (c) 2008 Atheros Communications Inc. | |
3 | * | |
4 | * Permission to use, copy, modify, and/or distribute this software for any | |
5 | * purpose with or without fee is hereby granted, provided that the above | |
6 | * copyright notice and this permission notice appear in all copies. | |
7 | * | |
8 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
9 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
10 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
11 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
12 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
13 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
14 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
15 | */ | |
16 | ||
f078f209 LR |
17 | #include "core.h" |
18 | ||
19 | /* | |
f078f209 LR |
20 | * This function will modify certain transmit queue properties depending on |
21 | * the operating mode of the station (AP or AdHoc). Parameters are AIFS | |
22 | * settings and channel width min/max | |
23 | */ | |
f078f209 LR |
24 | static int ath_beaconq_config(struct ath_softc *sc) |
25 | { | |
26 | struct ath_hal *ah = sc->sc_ah; | |
ea9880fb | 27 | struct ath9k_tx_queue_info qi; |
f078f209 | 28 | |
b77f483f | 29 | ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi); |
d97809db | 30 | if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) { |
f078f209 LR |
31 | /* Always burst out beacon and CAB traffic. */ |
32 | qi.tqi_aifs = 1; | |
33 | qi.tqi_cwmin = 0; | |
34 | qi.tqi_cwmax = 0; | |
35 | } else { | |
36 | /* Adhoc mode; important thing is to use 2x cwmin. */ | |
b77f483f S |
37 | qi.tqi_aifs = sc->beacon.beacon_qi.tqi_aifs; |
38 | qi.tqi_cwmin = 2*sc->beacon.beacon_qi.tqi_cwmin; | |
39 | qi.tqi_cwmax = sc->beacon.beacon_qi.tqi_cwmax; | |
f078f209 LR |
40 | } |
41 | ||
b77f483f | 42 | if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) { |
f078f209 | 43 | DPRINTF(sc, ATH_DBG_FATAL, |
04bd4638 | 44 | "unable to update h/w beacon queue parameters\n"); |
f078f209 LR |
45 | return 0; |
46 | } else { | |
b77f483f | 47 | ath9k_hw_resettxqueue(ah, sc->beacon.beaconq); /* push to h/w */ |
f078f209 LR |
48 | return 1; |
49 | } | |
50 | } | |
51 | ||
ff37e337 S |
52 | static void ath_bstuck_process(struct ath_softc *sc) |
53 | { | |
54 | DPRINTF(sc, ATH_DBG_BEACON, | |
04bd4638 | 55 | "stuck beacon; resetting (bmiss count %u)\n", |
b77f483f | 56 | sc->beacon.bmisscnt); |
ff37e337 S |
57 | ath_reset(sc, false); |
58 | } | |
59 | ||
f078f209 | 60 | /* |
f078f209 LR |
61 | * Associates the beacon frame buffer with a transmit descriptor. Will set |
62 | * up all required antenna switch parameters, rate codes, and channel flags. | |
63 | * Beacons are always sent out at the lowest rate, and are not retried. | |
64 | */ | |
f078f209 | 65 | static void ath_beacon_setup(struct ath_softc *sc, |
980b24da | 66 | struct ath_vap *avp, struct ath_buf *bf) |
f078f209 LR |
67 | { |
68 | struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; | |
69 | struct ath_hal *ah = sc->sc_ah; | |
70 | struct ath_desc *ds; | |
980b24da | 71 | struct ath9k_11n_rate_series series[4]; |
e63835b0 | 72 | struct ath_rate_table *rt; |
980b24da | 73 | int flags, antenna; |
f078f209 LR |
74 | u8 rix, rate; |
75 | int ctsrate = 0; | |
76 | int ctsduration = 0; | |
f078f209 | 77 | |
04bd4638 | 78 | DPRINTF(sc, ATH_DBG_BEACON, "m %p len %u\n", skb, skb->len); |
f078f209 LR |
79 | |
80 | /* setup descriptors */ | |
81 | ds = bf->bf_desc; | |
82 | ||
83 | flags = ATH9K_TXDESC_NOACK; | |
84 | ||
d97809db | 85 | if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC && |
60b67f51 | 86 | (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { |
f078f209 LR |
87 | ds->ds_link = bf->bf_daddr; /* self-linked */ |
88 | flags |= ATH9K_TXDESC_VEOL; | |
89 | /* Let hardware handle antenna switching. */ | |
90 | antenna = 0; | |
91 | } else { | |
92 | ds->ds_link = 0; | |
93 | /* | |
94 | * Switch antenna every beacon. | |
95 | * Should only switch every beacon period, not for every | |
96 | * SWBA's | |
97 | * XXX assumes two antenna | |
98 | */ | |
b77f483f | 99 | antenna = ((sc->beacon.ast_be_xmit / sc->sc_nbcnvaps) & 1 ? 2 : 1); |
f078f209 LR |
100 | } |
101 | ||
102 | ds->ds_data = bf->bf_buf_addr; | |
103 | ||
104 | /* | |
105 | * Calculate rate code. | |
106 | * XXX everything at min xmit rate | |
107 | */ | |
86b89eed | 108 | rix = 0; |
3706de6f | 109 | rt = sc->cur_rate_table; |
e63835b0 | 110 | rate = rt->info[rix].ratecode; |
672840ac | 111 | if (sc->sc_flags & SC_OP_PREAMBLE_SHORT) |
e63835b0 | 112 | rate |= rt->info[rix].short_preamble; |
f078f209 | 113 | |
ff9b662d | 114 | ath9k_hw_set11n_txdesc(ah, ds, |
980b24da S |
115 | skb->len + FCS_LEN, /* frame length */ |
116 | ATH9K_PKT_TYPE_BEACON, /* Atheros packet type */ | |
528f0c6b | 117 | MAX_RATE_POWER, /* FIXME */ |
980b24da S |
118 | ATH9K_TXKEYIX_INVALID, /* no encryption */ |
119 | ATH9K_KEY_TYPE_CLEAR, /* no encryption */ | |
120 | flags /* no ack, | |
121 | veol for beacons */ | |
f078f209 LR |
122 | ); |
123 | ||
124 | /* NB: beacon's BufLen must be a multiple of 4 bytes */ | |
ff9b662d S |
125 | ath9k_hw_filltxdesc(ah, ds, |
126 | roundup(skb->len, 4), /* buffer length */ | |
980b24da S |
127 | true, /* first segment */ |
128 | true, /* last segment */ | |
129 | ds /* first descriptor */ | |
f078f209 LR |
130 | ); |
131 | ||
0345f37b | 132 | memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4); |
f078f209 LR |
133 | series[0].Tries = 1; |
134 | series[0].Rate = rate; | |
135 | series[0].ChSel = sc->sc_tx_chainmask; | |
136 | series[0].RateFlags = (ctsrate) ? ATH9K_RATESERIES_RTS_CTS : 0; | |
137 | ath9k_hw_set11n_ratescenario(ah, ds, ds, 0, | |
138 | ctsrate, ctsduration, series, 4, 0); | |
139 | } | |
140 | ||
ff37e337 | 141 | /* Generate beacon frame and queue cab data for a vap */ |
f078f209 LR |
142 | static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) |
143 | { | |
f078f209 LR |
144 | struct ath_buf *bf; |
145 | struct ath_vap *avp; | |
146 | struct sk_buff *skb; | |
f078f209 | 147 | struct ath_txq *cabq; |
5640b08e | 148 | struct ieee80211_vif *vif; |
147583c0 | 149 | struct ieee80211_tx_info *info; |
980b24da S |
150 | int cabq_depth; |
151 | ||
5640b08e S |
152 | vif = sc->sc_vaps[if_id]; |
153 | ASSERT(vif); | |
f078f209 | 154 | |
5640b08e | 155 | avp = (void *)vif->drv_priv; |
b77f483f | 156 | cabq = sc->beacon.cabq; |
f078f209 | 157 | |
f078f209 | 158 | if (avp->av_bcbuf == NULL) { |
04bd4638 S |
159 | DPRINTF(sc, ATH_DBG_BEACON, "avp=%p av_bcbuf=%p\n", |
160 | avp, avp->av_bcbuf); | |
f078f209 LR |
161 | return NULL; |
162 | } | |
980b24da | 163 | |
f078f209 | 164 | bf = avp->av_bcbuf; |
980b24da | 165 | skb = (struct sk_buff *)bf->bf_mpdu; |
a8fff50e JM |
166 | if (skb) { |
167 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, | |
ca0c7e51 | 168 | skb->len, |
a8fff50e | 169 | PCI_DMA_TODEVICE); |
3fbb9d95 | 170 | dev_kfree_skb_any(skb); |
a8fff50e | 171 | } |
f078f209 | 172 | |
5640b08e | 173 | skb = ieee80211_beacon_get(sc->hw, vif); |
a8fff50e JM |
174 | bf->bf_mpdu = skb; |
175 | if (skb == NULL) | |
176 | return NULL; | |
980b24da | 177 | |
147583c0 JM |
178 | info = IEEE80211_SKB_CB(skb); |
179 | if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { | |
180 | /* | |
181 | * TODO: make sure the seq# gets assigned properly (vs. other | |
182 | * TX frames) | |
183 | */ | |
980b24da | 184 | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
b77f483f | 185 | sc->tx.seq_no += 0x10; |
147583c0 | 186 | hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); |
b77f483f | 187 | hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no); |
147583c0 | 188 | } |
980b24da | 189 | |
a8fff50e JM |
190 | bf->bf_buf_addr = bf->bf_dmacontext = |
191 | pci_map_single(sc->pdev, skb->data, | |
ca0c7e51 | 192 | skb->len, |
a8fff50e | 193 | PCI_DMA_TODEVICE); |
f8316df1 LR |
194 | if (unlikely(pci_dma_mapping_error(sc->pdev, bf->bf_buf_addr))) { |
195 | dev_kfree_skb_any(skb); | |
196 | bf->bf_mpdu = NULL; | |
197 | DPRINTF(sc, ATH_DBG_CONFIG, | |
198 | "pci_dma_mapping_error() on beaconing\n"); | |
199 | return NULL; | |
200 | } | |
f078f209 | 201 | |
5640b08e | 202 | skb = ieee80211_get_buffered_bc(sc->hw, vif); |
f078f209 | 203 | |
f078f209 LR |
204 | /* |
205 | * if the CABQ traffic from previous DTIM is pending and the current | |
206 | * beacon is also a DTIM. | |
207 | * 1) if there is only one vap let the cab traffic continue. | |
208 | * 2) if there are more than one vap and we are using staggered | |
209 | * beacons, then drain the cabq by dropping all the frames in | |
210 | * the cabq so that the current vaps cab traffic can be scheduled. | |
211 | */ | |
212 | spin_lock_bh(&cabq->axq_lock); | |
213 | cabq_depth = cabq->axq_depth; | |
214 | spin_unlock_bh(&cabq->axq_lock); | |
215 | ||
e022edbd | 216 | if (skb && cabq_depth) { |
f078f209 LR |
217 | /* |
218 | * Unlock the cabq lock as ath_tx_draintxq acquires | |
219 | * the lock again which is a common function and that | |
220 | * acquires txq lock inside. | |
221 | */ | |
222 | if (sc->sc_nvaps > 1) { | |
223 | ath_tx_draintxq(sc, cabq, false); | |
224 | DPRINTF(sc, ATH_DBG_BEACON, | |
04bd4638 | 225 | "flush previous cabq traffic\n"); |
f078f209 LR |
226 | } |
227 | } | |
228 | ||
229 | /* Construct tx descriptor. */ | |
230 | ath_beacon_setup(sc, avp, bf); | |
231 | ||
232 | /* | |
233 | * Enable the CAB queue before the beacon queue to | |
234 | * insure cab frames are triggered by this beacon. | |
235 | */ | |
e022edbd JM |
236 | while (skb) { |
237 | ath_tx_cabq(sc, skb); | |
5640b08e | 238 | skb = ieee80211_get_buffered_bc(sc->hw, vif); |
e022edbd | 239 | } |
f078f209 | 240 | |
f078f209 LR |
241 | return bf; |
242 | } | |
243 | ||
244 | /* | |
245 | * Startup beacon transmission for adhoc mode when they are sent entirely | |
246 | * by the hardware using the self-linked descriptor + veol trick. | |
247 | */ | |
f078f209 LR |
248 | static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id) |
249 | { | |
5640b08e | 250 | struct ieee80211_vif *vif; |
f078f209 LR |
251 | struct ath_hal *ah = sc->sc_ah; |
252 | struct ath_buf *bf; | |
253 | struct ath_vap *avp; | |
254 | struct sk_buff *skb; | |
255 | ||
5640b08e S |
256 | vif = sc->sc_vaps[if_id]; |
257 | ASSERT(vif); | |
258 | ||
259 | avp = (void *)vif->drv_priv; | |
f078f209 LR |
260 | |
261 | if (avp->av_bcbuf == NULL) { | |
04bd4638 S |
262 | DPRINTF(sc, ATH_DBG_BEACON, "avp=%p av_bcbuf=%p\n", |
263 | avp, avp != NULL ? avp->av_bcbuf : NULL); | |
f078f209 LR |
264 | return; |
265 | } | |
266 | bf = avp->av_bcbuf; | |
267 | skb = (struct sk_buff *) bf->bf_mpdu; | |
268 | ||
269 | /* Construct tx descriptor. */ | |
270 | ath_beacon_setup(sc, avp, bf); | |
271 | ||
272 | /* NB: caller is known to have already stopped tx dma */ | |
b77f483f S |
273 | ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr); |
274 | ath9k_hw_txstart(ah, sc->beacon.beaconq); | |
04bd4638 | 275 | DPRINTF(sc, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n", |
b77f483f | 276 | sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc); |
f078f209 LR |
277 | } |
278 | ||
f078f209 LR |
279 | int ath_beaconq_setup(struct ath_hal *ah) |
280 | { | |
ea9880fb | 281 | struct ath9k_tx_queue_info qi; |
f078f209 | 282 | |
0345f37b | 283 | memset(&qi, 0, sizeof(qi)); |
f078f209 LR |
284 | qi.tqi_aifs = 1; |
285 | qi.tqi_cwmin = 0; | |
286 | qi.tqi_cwmax = 0; | |
287 | /* NB: don't enable any interrupts */ | |
288 | return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi); | |
289 | } | |
290 | ||
f078f209 LR |
291 | int ath_beacon_alloc(struct ath_softc *sc, int if_id) |
292 | { | |
5640b08e | 293 | struct ieee80211_vif *vif; |
f078f209 | 294 | struct ath_vap *avp; |
980b24da | 295 | struct ieee80211_hdr *hdr; |
f078f209 LR |
296 | struct ath_buf *bf; |
297 | struct sk_buff *skb; | |
459f5f90 | 298 | __le64 tstamp; |
f078f209 | 299 | |
5640b08e S |
300 | vif = sc->sc_vaps[if_id]; |
301 | ASSERT(vif); | |
302 | ||
303 | avp = (void *)vif->drv_priv; | |
f078f209 LR |
304 | |
305 | /* Allocate a beacon descriptor if we haven't done so. */ | |
306 | if (!avp->av_bcbuf) { | |
980b24da S |
307 | /* Allocate beacon state for hostap/ibss. We know |
308 | * a buffer is available. */ | |
b77f483f | 309 | avp->av_bcbuf = list_first_entry(&sc->beacon.bbuf, |
980b24da | 310 | struct ath_buf, list); |
f078f209 LR |
311 | list_del(&avp->av_bcbuf->list); |
312 | ||
d97809db | 313 | if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP || |
60b67f51 | 314 | !(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { |
f078f209 LR |
315 | int slot; |
316 | /* | |
317 | * Assign the vap to a beacon xmit slot. As | |
318 | * above, this cannot fail to find one. | |
319 | */ | |
320 | avp->av_bslot = 0; | |
321 | for (slot = 0; slot < ATH_BCBUF; slot++) | |
b77f483f | 322 | if (sc->beacon.bslot[slot] == ATH_IF_ID_ANY) { |
f078f209 LR |
323 | /* |
324 | * XXX hack, space out slots to better | |
325 | * deal with misses | |
326 | */ | |
327 | if (slot+1 < ATH_BCBUF && | |
b77f483f | 328 | sc->beacon.bslot[slot+1] == |
f078f209 LR |
329 | ATH_IF_ID_ANY) { |
330 | avp->av_bslot = slot+1; | |
331 | break; | |
332 | } | |
333 | avp->av_bslot = slot; | |
334 | /* NB: keep looking for a double slot */ | |
335 | } | |
b77f483f S |
336 | BUG_ON(sc->beacon.bslot[avp->av_bslot] != ATH_IF_ID_ANY); |
337 | sc->beacon.bslot[avp->av_bslot] = if_id; | |
f078f209 LR |
338 | sc->sc_nbcnvaps++; |
339 | } | |
340 | } | |
341 | ||
342 | /* release the previous beacon frame , if it already exists. */ | |
343 | bf = avp->av_bcbuf; | |
344 | if (bf->bf_mpdu != NULL) { | |
345 | skb = (struct sk_buff *)bf->bf_mpdu; | |
a8fff50e | 346 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, |
ca0c7e51 | 347 | skb->len, |
a8fff50e | 348 | PCI_DMA_TODEVICE); |
f078f209 LR |
349 | dev_kfree_skb_any(skb); |
350 | bf->bf_mpdu = NULL; | |
351 | } | |
352 | ||
353 | /* | |
980b24da | 354 | * NB: the beacon data buffer must be 32-bit aligned. |
e022edbd | 355 | * FIXME: Fill avp->av_btxctl.txpower and |
f078f209 LR |
356 | * avp->av_btxctl.shortPreamble |
357 | */ | |
5640b08e | 358 | skb = ieee80211_beacon_get(sc->hw, vif); |
f078f209 | 359 | if (skb == NULL) { |
04bd4638 | 360 | DPRINTF(sc, ATH_DBG_BEACON, "cannot get skb\n"); |
f078f209 LR |
361 | return -ENOMEM; |
362 | } | |
363 | ||
459f5f90 | 364 | tstamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; |
b77f483f | 365 | sc->beacon.bc_tstamp = le64_to_cpu(tstamp); |
459f5f90 | 366 | |
f078f209 LR |
367 | /* |
368 | * Calculate a TSF adjustment factor required for | |
369 | * staggered beacons. Note that we assume the format | |
370 | * of the beacon frame leaves the tstamp field immediately | |
371 | * following the header. | |
372 | */ | |
373 | if (avp->av_bslot > 0) { | |
374 | u64 tsfadjust; | |
375 | __le64 val; | |
376 | int intval; | |
377 | ||
a8fff50e JM |
378 | intval = sc->hw->conf.beacon_int ? |
379 | sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; | |
f078f209 LR |
380 | |
381 | /* | |
382 | * The beacon interval is in TU's; the TSF in usecs. | |
383 | * We figure out how many TU's to add to align the | |
384 | * timestamp then convert to TSF units and handle | |
385 | * byte swapping before writing it in the frame. | |
386 | * The hardware will then add this each time a beacon | |
387 | * frame is sent. Note that we align vap's 1..N | |
388 | * and leave vap 0 untouched. This means vap 0 | |
389 | * has a timestamp in one beacon interval while the | |
390 | * others get a timestamp aligned to the next interval. | |
391 | */ | |
392 | tsfadjust = (intval * (ATH_BCBUF - avp->av_bslot)) / ATH_BCBUF; | |
393 | val = cpu_to_le64(tsfadjust << 10); /* TU->TSF */ | |
394 | ||
395 | DPRINTF(sc, ATH_DBG_BEACON, | |
04bd4638 | 396 | "stagger beacons, bslot %d intval %u tsfadjust %llu\n", |
f078f209 LR |
397 | avp->av_bslot, intval, (unsigned long long)tsfadjust); |
398 | ||
980b24da S |
399 | hdr = (struct ieee80211_hdr *)skb->data; |
400 | memcpy(&hdr[1], &val, sizeof(val)); | |
f078f209 LR |
401 | } |
402 | ||
f8316df1 | 403 | bf->bf_mpdu = skb; |
a8fff50e JM |
404 | bf->bf_buf_addr = bf->bf_dmacontext = |
405 | pci_map_single(sc->pdev, skb->data, | |
ca0c7e51 | 406 | skb->len, |
a8fff50e | 407 | PCI_DMA_TODEVICE); |
f8316df1 LR |
408 | if (unlikely(pci_dma_mapping_error(sc->pdev, bf->bf_buf_addr))) { |
409 | dev_kfree_skb_any(skb); | |
410 | bf->bf_mpdu = NULL; | |
411 | DPRINTF(sc, ATH_DBG_CONFIG, | |
412 | "pci_dma_mapping_error() on beacon alloc\n"); | |
413 | return -ENOMEM; | |
414 | } | |
f078f209 LR |
415 | |
416 | return 0; | |
417 | } | |
418 | ||
f078f209 LR |
419 | void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) |
420 | { | |
421 | if (avp->av_bcbuf != NULL) { | |
422 | struct ath_buf *bf; | |
423 | ||
424 | if (avp->av_bslot != -1) { | |
b77f483f | 425 | sc->beacon.bslot[avp->av_bslot] = ATH_IF_ID_ANY; |
f078f209 LR |
426 | sc->sc_nbcnvaps--; |
427 | } | |
428 | ||
429 | bf = avp->av_bcbuf; | |
430 | if (bf->bf_mpdu != NULL) { | |
431 | struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; | |
a8fff50e | 432 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, |
ca0c7e51 | 433 | skb->len, |
a8fff50e | 434 | PCI_DMA_TODEVICE); |
f078f209 LR |
435 | dev_kfree_skb_any(skb); |
436 | bf->bf_mpdu = NULL; | |
437 | } | |
b77f483f | 438 | list_add_tail(&bf->list, &sc->beacon.bbuf); |
f078f209 LR |
439 | |
440 | avp->av_bcbuf = NULL; | |
441 | } | |
442 | } | |
443 | ||
f078f209 LR |
444 | void ath9k_beacon_tasklet(unsigned long data) |
445 | { | |
f078f209 LR |
446 | struct ath_softc *sc = (struct ath_softc *)data; |
447 | struct ath_hal *ah = sc->sc_ah; | |
448 | struct ath_buf *bf = NULL; | |
449 | int slot, if_id; | |
450 | u32 bfaddr; | |
451 | u32 rx_clear = 0, rx_frame = 0, tx_frame = 0; | |
452 | u32 show_cycles = 0; | |
453 | u32 bc = 0; /* beacon count */ | |
454 | u64 tsf; | |
455 | u32 tsftu; | |
456 | u16 intval; | |
457 | ||
98deeea0 | 458 | if (sc->sc_flags & SC_OP_NO_RESET) { |
f078f209 | 459 | show_cycles = ath9k_hw_GetMibCycleCountsPct(ah, |
ff37e337 | 460 | &rx_clear, &rx_frame, &tx_frame); |
f078f209 LR |
461 | } |
462 | ||
463 | /* | |
464 | * Check if the previous beacon has gone out. If | |
465 | * not don't try to post another, skip this period | |
466 | * and wait for the next. Missed beacons indicate | |
467 | * a problem and should not occur. If we miss too | |
468 | * many consecutive beacons reset the device. | |
980b24da S |
469 | * |
470 | * FIXME: Clean up this mess !! | |
f078f209 | 471 | */ |
b77f483f S |
472 | if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) { |
473 | sc->beacon.bmisscnt++; | |
f078f209 LR |
474 | /* XXX: doth needs the chanchange IE countdown decremented. |
475 | * We should consider adding a mac80211 call to indicate | |
476 | * a beacon miss so appropriate action could be taken | |
477 | * (in that layer). | |
478 | */ | |
b77f483f | 479 | if (sc->beacon.bmisscnt < BSTUCK_THRESH) { |
98deeea0 | 480 | if (sc->sc_flags & SC_OP_NO_RESET) { |
f078f209 | 481 | DPRINTF(sc, ATH_DBG_BEACON, |
04bd4638 | 482 | "missed %u consecutive beacons\n", |
b77f483f | 483 | sc->beacon.bmisscnt); |
f078f209 LR |
484 | if (show_cycles) { |
485 | /* | |
980b24da S |
486 | * Display cycle counter stats from HW |
487 | * to aide in debug of stickiness. | |
f078f209 | 488 | */ |
980b24da | 489 | DPRINTF(sc, ATH_DBG_BEACON, |
04bd4638 | 490 | "busy times: rx_clear=%d, " |
f078f209 | 491 | "rx_frame=%d, tx_frame=%d\n", |
04bd4638 | 492 | rx_clear, rx_frame, |
f078f209 LR |
493 | tx_frame); |
494 | } else { | |
980b24da | 495 | DPRINTF(sc, ATH_DBG_BEACON, |
04bd4638 S |
496 | "unable to obtain " |
497 | "busy times\n"); | |
f078f209 LR |
498 | } |
499 | } else { | |
500 | DPRINTF(sc, ATH_DBG_BEACON, | |
04bd4638 | 501 | "missed %u consecutive beacons\n", |
b77f483f | 502 | sc->beacon.bmisscnt); |
f078f209 | 503 | } |
b77f483f | 504 | } else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) { |
98deeea0 | 505 | if (sc->sc_flags & SC_OP_NO_RESET) { |
b77f483f | 506 | if (sc->beacon.bmisscnt == BSTUCK_THRESH) { |
980b24da | 507 | DPRINTF(sc, ATH_DBG_BEACON, |
04bd4638 S |
508 | "beacon is officially " |
509 | "stuck\n"); | |
f078f209 LR |
510 | } |
511 | } else { | |
512 | DPRINTF(sc, ATH_DBG_BEACON, | |
04bd4638 | 513 | "beacon is officially stuck\n"); |
f078f209 LR |
514 | ath_bstuck_process(sc); |
515 | } | |
516 | } | |
f078f209 LR |
517 | return; |
518 | } | |
980b24da | 519 | |
b77f483f | 520 | if (sc->beacon.bmisscnt != 0) { |
98deeea0 | 521 | if (sc->sc_flags & SC_OP_NO_RESET) { |
980b24da | 522 | DPRINTF(sc, ATH_DBG_BEACON, |
04bd4638 | 523 | "resume beacon xmit after %u misses\n", |
b77f483f | 524 | sc->beacon.bmisscnt); |
f078f209 LR |
525 | } else { |
526 | DPRINTF(sc, ATH_DBG_BEACON, | |
04bd4638 | 527 | "resume beacon xmit after %u misses\n", |
b77f483f | 528 | sc->beacon.bmisscnt); |
f078f209 | 529 | } |
b77f483f | 530 | sc->beacon.bmisscnt = 0; |
f078f209 LR |
531 | } |
532 | ||
533 | /* | |
534 | * Generate beacon frames. we are sending frames | |
535 | * staggered so calculate the slot for this frame based | |
536 | * on the tsf to safeguard against missing an swba. | |
537 | */ | |
538 | ||
a8fff50e JM |
539 | intval = sc->hw->conf.beacon_int ? |
540 | sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; | |
f078f209 LR |
541 | |
542 | tsf = ath9k_hw_gettsf64(ah); | |
543 | tsftu = TSF_TO_TU(tsf>>32, tsf); | |
544 | slot = ((tsftu % intval) * ATH_BCBUF) / intval; | |
b77f483f | 545 | if_id = sc->beacon.bslot[(slot + 1) % ATH_BCBUF]; |
980b24da | 546 | |
f078f209 | 547 | DPRINTF(sc, ATH_DBG_BEACON, |
04bd4638 S |
548 | "slot %d [tsf %llu tsftu %u intval %u] if_id %d\n", |
549 | slot, (unsigned long long)tsf, tsftu, | |
980b24da S |
550 | intval, if_id); |
551 | ||
f078f209 LR |
552 | bfaddr = 0; |
553 | if (if_id != ATH_IF_ID_ANY) { | |
554 | bf = ath_beacon_generate(sc, if_id); | |
555 | if (bf != NULL) { | |
556 | bfaddr = bf->bf_daddr; | |
557 | bc = 1; | |
558 | } | |
559 | } | |
560 | /* | |
561 | * Handle slot time change when a non-ERP station joins/leaves | |
562 | * an 11g network. The 802.11 layer notifies us via callback, | |
563 | * we mark updateslot, then wait one beacon before effecting | |
564 | * the change. This gives associated stations at least one | |
565 | * beacon interval to note the state change. | |
566 | * | |
567 | * NB: The slot time change state machine is clocked according | |
568 | * to whether we are bursting or staggering beacons. We | |
569 | * recognize the request to update and record the current | |
570 | * slot then don't transition until that slot is reached | |
571 | * again. If we miss a beacon for that slot then we'll be | |
572 | * slow to transition but we'll be sure at least one beacon | |
573 | * interval has passed. When bursting slot is always left | |
574 | * set to ATH_BCBUF so this check is a noop. | |
575 | */ | |
576 | /* XXX locking */ | |
b77f483f S |
577 | if (sc->beacon.updateslot == UPDATE) { |
578 | sc->beacon.updateslot = COMMIT; /* commit next beacon */ | |
579 | sc->beacon.slotupdate = slot; | |
580 | } else if (sc->beacon.updateslot == COMMIT && sc->beacon.slotupdate == slot) { | |
581 | ath9k_hw_setslottime(sc->sc_ah, sc->beacon.slottime); | |
582 | sc->beacon.updateslot = OK; | |
ff37e337 | 583 | } |
f078f209 LR |
584 | if (bfaddr != 0) { |
585 | /* | |
586 | * Stop any current dma and put the new frame(s) on the queue. | |
587 | * This should never fail since we check above that no frames | |
588 | * are still pending on the queue. | |
589 | */ | |
b77f483f | 590 | if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) { |
f078f209 | 591 | DPRINTF(sc, ATH_DBG_FATAL, |
b77f483f | 592 | "beacon queue %u did not stop?\n", sc->beacon.beaconq); |
f078f209 LR |
593 | /* NB: the HAL still stops DMA, so proceed */ |
594 | } | |
595 | ||
596 | /* NB: cabq traffic should already be queued and primed */ | |
b77f483f S |
597 | ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bfaddr); |
598 | ath9k_hw_txstart(ah, sc->beacon.beaconq); | |
f078f209 | 599 | |
b77f483f | 600 | sc->beacon.ast_be_xmit += bc; /* XXX per-vap? */ |
f078f209 | 601 | } |
f078f209 LR |
602 | } |
603 | ||
f078f209 LR |
604 | /* |
605 | * Configure the beacon and sleep timers. | |
606 | * | |
607 | * When operating as an AP this resets the TSF and sets | |
608 | * up the hardware to notify us when we need to issue beacons. | |
609 | * | |
610 | * When operating in station mode this sets up the beacon | |
611 | * timers according to the timestamp of the last received | |
612 | * beacon and the current TSF, configures PCF and DTIM | |
613 | * handling, programs the sleep registers so the hardware | |
614 | * will wakeup in time to receive beacons, and configures | |
615 | * the beacon miss handling so we'll receive a BMISS | |
616 | * interrupt when we stop seeing beacons from the AP | |
617 | * we've associated with. | |
618 | */ | |
f078f209 LR |
619 | void ath_beacon_config(struct ath_softc *sc, int if_id) |
620 | { | |
5640b08e | 621 | struct ieee80211_vif *vif; |
f078f209 | 622 | struct ath_hal *ah = sc->sc_ah; |
f078f209 | 623 | struct ath_beacon_config conf; |
5640b08e | 624 | struct ath_vap *avp; |
d97809db | 625 | enum nl80211_iftype opmode; |
980b24da | 626 | u32 nexttbtt, intval; |
f078f209 | 627 | |
5640b08e S |
628 | if (if_id != ATH_IF_ID_ANY) { |
629 | vif = sc->sc_vaps[if_id]; | |
630 | ASSERT(vif); | |
631 | avp = (void *)vif->drv_priv; | |
d97809db | 632 | opmode = avp->av_opmode; |
5640b08e | 633 | } else { |
d97809db | 634 | opmode = sc->sc_ah->ah_opmode; |
5640b08e | 635 | } |
f078f209 | 636 | |
0345f37b | 637 | memset(&conf, 0, sizeof(struct ath_beacon_config)); |
f078f209 | 638 | |
a8fff50e JM |
639 | conf.beacon_interval = sc->hw->conf.beacon_int ? |
640 | sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; | |
f078f209 LR |
641 | conf.listen_interval = 1; |
642 | conf.dtim_period = conf.beacon_interval; | |
643 | conf.dtim_count = 1; | |
644 | conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval; | |
645 | ||
646 | /* extract tstamp from last beacon and convert to TU */ | |
b77f483f | 647 | nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp); |
459f5f90 | 648 | |
f078f209 | 649 | /* XXX conditionalize multi-bss support? */ |
d97809db | 650 | if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) { |
f078f209 LR |
651 | /* |
652 | * For multi-bss ap support beacons are either staggered | |
653 | * evenly over N slots or burst together. For the former | |
654 | * arrange for the SWBA to be delivered for each slot. | |
655 | * Slots that are not occupied will generate nothing. | |
656 | */ | |
657 | /* NB: the beacon interval is kept internally in TU's */ | |
658 | intval = conf.beacon_interval & ATH9K_BEACON_PERIOD; | |
659 | intval /= ATH_BCBUF; /* for staggered beacons */ | |
660 | } else { | |
661 | intval = conf.beacon_interval & ATH9K_BEACON_PERIOD; | |
662 | } | |
663 | ||
980b24da | 664 | if (nexttbtt == 0) /* e.g. for ap mode */ |
f078f209 | 665 | nexttbtt = intval; |
980b24da | 666 | else if (intval) /* NB: can be 0 for monitor mode */ |
f078f209 | 667 | nexttbtt = roundup(nexttbtt, intval); |
980b24da | 668 | |
04bd4638 S |
669 | DPRINTF(sc, ATH_DBG_BEACON, "nexttbtt %u intval %u (%u)\n", |
670 | nexttbtt, intval, conf.beacon_interval); | |
980b24da | 671 | |
d97809db CM |
672 | /* Check for NL80211_IFTYPE_AP and sc_nostabeacons for WDS client */ |
673 | if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) { | |
f078f209 LR |
674 | struct ath9k_beacon_state bs; |
675 | u64 tsf; | |
676 | u32 tsftu; | |
677 | int dtimperiod, dtimcount, sleepduration; | |
678 | int cfpperiod, cfpcount; | |
679 | ||
680 | /* | |
681 | * Setup dtim and cfp parameters according to | |
682 | * last beacon we received (which may be none). | |
683 | */ | |
684 | dtimperiod = conf.dtim_period; | |
980b24da | 685 | if (dtimperiod <= 0) /* NB: 0 if not known */ |
f078f209 LR |
686 | dtimperiod = 1; |
687 | dtimcount = conf.dtim_count; | |
980b24da S |
688 | if (dtimcount >= dtimperiod) /* NB: sanity check */ |
689 | dtimcount = 0; | |
690 | cfpperiod = 1; /* NB: no PCF support yet */ | |
f078f209 LR |
691 | cfpcount = 0; |
692 | ||
693 | sleepduration = conf.listen_interval * intval; | |
694 | if (sleepduration <= 0) | |
695 | sleepduration = intval; | |
696 | ||
980b24da | 697 | #define FUDGE 2 |
f078f209 LR |
698 | /* |
699 | * Pull nexttbtt forward to reflect the current | |
700 | * TSF and calculate dtim+cfp state for the result. | |
701 | */ | |
702 | tsf = ath9k_hw_gettsf64(ah); | |
703 | tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE; | |
704 | do { | |
705 | nexttbtt += intval; | |
706 | if (--dtimcount < 0) { | |
707 | dtimcount = dtimperiod - 1; | |
708 | if (--cfpcount < 0) | |
709 | cfpcount = cfpperiod - 1; | |
710 | } | |
711 | } while (nexttbtt < tsftu); | |
712 | #undef FUDGE | |
0345f37b | 713 | memset(&bs, 0, sizeof(bs)); |
f078f209 LR |
714 | bs.bs_intval = intval; |
715 | bs.bs_nexttbtt = nexttbtt; | |
716 | bs.bs_dtimperiod = dtimperiod*intval; | |
717 | bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval; | |
718 | bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; | |
719 | bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; | |
720 | bs.bs_cfpmaxduration = 0; | |
980b24da | 721 | |
f078f209 LR |
722 | /* |
723 | * Calculate the number of consecutive beacons to miss | |
724 | * before taking a BMISS interrupt. The configuration | |
725 | * is specified in TU so we only need calculate based | |
726 | * on the beacon interval. Note that we clamp the | |
727 | * result to at most 15 beacons. | |
728 | */ | |
729 | if (sleepduration > intval) { | |
980b24da S |
730 | bs.bs_bmissthreshold = conf.listen_interval * |
731 | ATH_DEFAULT_BMISS_LIMIT / 2; | |
f078f209 LR |
732 | } else { |
733 | bs.bs_bmissthreshold = | |
734 | DIV_ROUND_UP(conf.bmiss_timeout, intval); | |
735 | if (bs.bs_bmissthreshold > 15) | |
736 | bs.bs_bmissthreshold = 15; | |
737 | else if (bs.bs_bmissthreshold <= 0) | |
738 | bs.bs_bmissthreshold = 1; | |
739 | } | |
740 | ||
741 | /* | |
742 | * Calculate sleep duration. The configuration is | |
743 | * given in ms. We insure a multiple of the beacon | |
744 | * period is used. Also, if the sleep duration is | |
745 | * greater than the DTIM period then it makes senses | |
746 | * to make it a multiple of that. | |
747 | * | |
748 | * XXX fixed at 100ms | |
749 | */ | |
750 | ||
980b24da S |
751 | bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), |
752 | sleepduration); | |
f078f209 LR |
753 | if (bs.bs_sleepduration > bs.bs_dtimperiod) |
754 | bs.bs_sleepduration = bs.bs_dtimperiod; | |
755 | ||
756 | DPRINTF(sc, ATH_DBG_BEACON, | |
04bd4638 | 757 | "tsf %llu " |
f078f209 LR |
758 | "tsf:tu %u " |
759 | "intval %u " | |
760 | "nexttbtt %u " | |
761 | "dtim %u " | |
762 | "nextdtim %u " | |
763 | "bmiss %u " | |
764 | "sleep %u " | |
765 | "cfp:period %u " | |
766 | "maxdur %u " | |
767 | "next %u " | |
ff9b662d | 768 | "timoffset %u\n", |
ff9b662d S |
769 | (unsigned long long)tsf, tsftu, |
770 | bs.bs_intval, | |
771 | bs.bs_nexttbtt, | |
772 | bs.bs_dtimperiod, | |
773 | bs.bs_nextdtim, | |
774 | bs.bs_bmissthreshold, | |
775 | bs.bs_sleepduration, | |
776 | bs.bs_cfpperiod, | |
777 | bs.bs_cfpmaxduration, | |
778 | bs.bs_cfpnext, | |
779 | bs.bs_timoffset | |
f078f209 LR |
780 | ); |
781 | ||
782 | ath9k_hw_set_interrupts(ah, 0); | |
783 | ath9k_hw_set_sta_beacon_timers(ah, &bs); | |
784 | sc->sc_imask |= ATH9K_INT_BMISS; | |
785 | ath9k_hw_set_interrupts(ah, sc->sc_imask); | |
786 | } else { | |
787 | u64 tsf; | |
788 | u32 tsftu; | |
789 | ath9k_hw_set_interrupts(ah, 0); | |
790 | if (nexttbtt == intval) | |
791 | intval |= ATH9K_BEACON_RESET_TSF; | |
d97809db | 792 | if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC) { |
f078f209 LR |
793 | /* |
794 | * Pull nexttbtt forward to reflect the current | |
980b24da | 795 | * TSF |
f078f209 | 796 | */ |
980b24da | 797 | #define FUDGE 2 |
f078f209 LR |
798 | if (!(intval & ATH9K_BEACON_RESET_TSF)) { |
799 | tsf = ath9k_hw_gettsf64(ah); | |
800 | tsftu = TSF_TO_TU((u32)(tsf>>32), | |
801 | (u32)tsf) + FUDGE; | |
802 | do { | |
803 | nexttbtt += intval; | |
804 | } while (nexttbtt < tsftu); | |
805 | } | |
806 | #undef FUDGE | |
807 | DPRINTF(sc, ATH_DBG_BEACON, | |
04bd4638 S |
808 | "IBSS nexttbtt %u intval %u (%u)\n", |
809 | nexttbtt, | |
f078f209 LR |
810 | intval & ~ATH9K_BEACON_RESET_TSF, |
811 | conf.beacon_interval); | |
812 | ||
813 | /* | |
814 | * In IBSS mode enable the beacon timers but only | |
815 | * enable SWBA interrupts if we need to manually | |
816 | * prepare beacon frames. Otherwise we use a | |
817 | * self-linked tx descriptor and let the hardware | |
818 | * deal with things. | |
819 | */ | |
820 | intval |= ATH9K_BEACON_ENA; | |
60b67f51 | 821 | if (!(ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) |
f078f209 LR |
822 | sc->sc_imask |= ATH9K_INT_SWBA; |
823 | ath_beaconq_config(sc); | |
d97809db | 824 | } else if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) { |
f078f209 LR |
825 | /* |
826 | * In AP mode we enable the beacon timers and | |
827 | * SWBA interrupts to prepare beacon frames. | |
828 | */ | |
829 | intval |= ATH9K_BEACON_ENA; | |
830 | sc->sc_imask |= ATH9K_INT_SWBA; /* beacon prepare */ | |
831 | ath_beaconq_config(sc); | |
832 | } | |
833 | ath9k_hw_beaconinit(ah, nexttbtt, intval); | |
b77f483f | 834 | sc->beacon.bmisscnt = 0; |
f078f209 LR |
835 | ath9k_hw_set_interrupts(ah, sc->sc_imask); |
836 | /* | |
837 | * When using a self-linked beacon descriptor in | |
838 | * ibss mode load it once here. | |
839 | */ | |
d97809db | 840 | if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC && |
60b67f51 | 841 | (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) |
f078f209 LR |
842 | ath_beacon_start_adhoc(sc, 0); |
843 | } | |
f078f209 LR |
844 | } |
845 | ||
f078f209 LR |
846 | void ath_beacon_sync(struct ath_softc *sc, int if_id) |
847 | { | |
848 | /* | |
849 | * Resync beacon timers using the tsf of the | |
850 | * beacon frame we just received. | |
851 | */ | |
852 | ath_beacon_config(sc, if_id); | |
672840ac | 853 | sc->sc_flags |= SC_OP_BEACONS; |
f078f209 | 854 | } |