Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | Aironet driver for 4500 and 4800 series cards | |
4 | ||
5 | This code is released under both the GPL version 2 and BSD licenses. | |
6 | Either license may be used. The respective licenses are found at | |
7 | the end of this file. | |
8 | ||
9 | This code was developed by Benjamin Reed <breed@users.sourceforge.net> | |
10 | including portions of which come from the Aironet PC4500 | |
11 | Developer's Reference Manual and used with permission. Copyright | |
12 | (C) 1999 Benjamin Reed. All Rights Reserved. Permission to use | |
13 | code in the Developer's manual was granted for this driver by | |
14 | Aironet. | |
15 | ||
16 | In addition this module was derived from dummy_cs. | |
17 | The initial developer of dummy_cs is David A. Hinds | |
18 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
19 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
20 | ||
21 | ======================================================================*/ | |
22 | ||
1da177e4 LT |
23 | #ifdef __IN_PCMCIA_PACKAGE__ |
24 | #include <pcmcia/k_compat.h> | |
25 | #endif | |
26 | #include <linux/init.h> | |
27 | #include <linux/kernel.h> | |
28 | #include <linux/module.h> | |
29 | #include <linux/ptrace.h> | |
30 | #include <linux/slab.h> | |
31 | #include <linux/string.h> | |
32 | #include <linux/timer.h> | |
33 | #include <linux/netdevice.h> | |
34 | ||
1da177e4 LT |
35 | #include <pcmcia/cs_types.h> |
36 | #include <pcmcia/cs.h> | |
37 | #include <pcmcia/cistpl.h> | |
38 | #include <pcmcia/cisreg.h> | |
39 | #include <pcmcia/ds.h> | |
40 | ||
41 | #include <asm/io.h> | |
42 | #include <asm/system.h> | |
43 | ||
d3808760 AB |
44 | #include "airo.h" |
45 | ||
1da177e4 LT |
46 | /* |
47 | All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If | |
48 | you do not define PCMCIA_DEBUG at all, all the debug code will be | |
49 | left out. If you compile with PCMCIA_DEBUG=0, the debug code will | |
50 | be present but disabled -- but it can then be enabled for specific | |
51 | modules at load time with a 'pc_debug=#' option to insmod. | |
52 | */ | |
53 | #ifdef PCMCIA_DEBUG | |
54 | static int pc_debug = PCMCIA_DEBUG; | |
55 | module_param(pc_debug, int, 0); | |
56 | static char *version = "$Revision: 1.2 $"; | |
57 | #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); | |
58 | #else | |
59 | #define DEBUG(n, args...) | |
60 | #endif | |
61 | ||
62 | /*====================================================================*/ | |
63 | ||
64 | MODULE_AUTHOR("Benjamin Reed"); | |
65 | MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \ | |
66 | cards. This is the module that links the PCMCIA card \ | |
67 | with the airo module."); | |
68 | MODULE_LICENSE("Dual BSD/GPL"); | |
69 | MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); | |
70 | ||
71 | /*====================================================================*/ | |
72 | ||
73 | /* | |
74 | The event() function is this driver's Card Services event handler. | |
75 | It will be called by Card Services when an appropriate card status | |
76 | event is received. The config() and release() entry points are | |
77 | used to configure or release a socket, in response to card | |
78 | insertion and ejection events. They are invoked from the airo_cs | |
79 | event handler. | |
80 | */ | |
81 | ||
15b99ac1 | 82 | static int airo_config(struct pcmcia_device *link); |
fba395ee | 83 | static void airo_release(struct pcmcia_device *link); |
1da177e4 LT |
84 | |
85 | /* | |
86 | The attach() and detach() entry points are used to create and destroy | |
87 | "instances" of the driver, where each instance represents everything | |
88 | needed to manage one actual PCMCIA card. | |
89 | */ | |
90 | ||
cc3b4866 | 91 | static void airo_detach(struct pcmcia_device *p_dev); |
1da177e4 LT |
92 | |
93 | /* | |
94 | You'll also need to prototype all the functions that will actually | |
95 | be used to talk to your device. See 'pcmem_cs' for a good example | |
96 | of a fully self-sufficient driver; the other drivers rely more or | |
97 | less on other parts of the kernel. | |
98 | */ | |
99 | ||
1da177e4 LT |
100 | /* |
101 | A linked list of "instances" of the aironet device. Each actual | |
102 | PCMCIA card corresponds to one device instance, and is described | |
fba395ee | 103 | by one struct pcmcia_device structure (defined in ds.h). |
1da177e4 LT |
104 | |
105 | You may not want to use a linked list for this -- for example, the | |
fba395ee | 106 | memory card driver uses an array of struct pcmcia_device pointers, where minor |
1da177e4 LT |
107 | device numbers are used to derive the corresponding array index. |
108 | */ | |
109 | ||
1da177e4 | 110 | /* |
1da177e4 LT |
111 | A driver needs to provide a dev_node_t structure for each device |
112 | on a card. In some cases, there is only one device per card (for | |
113 | example, ethernet cards, modems). In other cases, there may be | |
114 | many actual or logical devices (SCSI adapters, memory cards with | |
115 | multiple partitions). The dev_node_t structures need to be kept | |
fba395ee | 116 | in a linked list starting at the 'dev' field of a struct pcmcia_device |
1da177e4 LT |
117 | structure. We allocate them in the card's private data structure, |
118 | because they generally shouldn't be allocated dynamically. | |
119 | ||
120 | In this case, we also provide a flag to indicate if a device is | |
121 | "stopped" due to a power management event, or card ejection. The | |
122 | device IO routines can use a flag like this to throttle IO to a | |
123 | card that is not ready to accept it. | |
124 | */ | |
125 | ||
126 | typedef struct local_info_t { | |
127 | dev_node_t node; | |
128 | struct net_device *eth_dev; | |
129 | } local_info_t; | |
130 | ||
131 | /*====================================================================== | |
132 | ||
133 | airo_attach() creates an "instance" of the driver, allocating | |
134 | local data structures for one device. The device is registered | |
135 | with Card Services. | |
136 | ||
137 | The dev_link structure is initialized, but we don't actually | |
138 | configure the card at this point -- we wait until we receive a | |
139 | card insertion event. | |
140 | ||
141 | ======================================================================*/ | |
142 | ||
15b99ac1 | 143 | static int airo_probe(struct pcmcia_device *p_dev) |
1da177e4 | 144 | { |
1da177e4 | 145 | local_info_t *local; |
f8cfa618 | 146 | |
1da177e4 LT |
147 | DEBUG(0, "airo_attach()\n"); |
148 | ||
1da177e4 | 149 | /* Interrupt setup */ |
fd238232 DB |
150 | p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE; |
151 | p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
152 | p_dev->irq.Handler = NULL; | |
1da177e4 LT |
153 | |
154 | /* | |
155 | General socket configuration defaults can go here. In this | |
156 | client, we assume very little, and rely on the CIS for almost | |
157 | everything. In most clients, many details (i.e., number, sizes, | |
158 | and attributes of IO windows) are fixed by the nature of the | |
159 | device, and can be hard-wired here. | |
160 | */ | |
fd238232 DB |
161 | p_dev->conf.Attributes = 0; |
162 | p_dev->conf.IntType = INT_MEMORY_AND_IO; | |
1da177e4 LT |
163 | |
164 | /* Allocate space for private device-specific data */ | |
b69a3aa8 | 165 | local = kzalloc(sizeof(local_info_t), GFP_KERNEL); |
1da177e4 LT |
166 | if (!local) { |
167 | printk(KERN_ERR "airo_cs: no memory for new device\n"); | |
f8cfa618 | 168 | return -ENOMEM; |
1da177e4 | 169 | } |
fd238232 | 170 | p_dev->priv = local; |
f8cfa618 | 171 | |
15b99ac1 | 172 | return airo_config(p_dev); |
1da177e4 LT |
173 | } /* airo_attach */ |
174 | ||
175 | /*====================================================================== | |
176 | ||
177 | This deletes a driver "instance". The device is de-registered | |
178 | with Card Services. If it has been released, all local data | |
179 | structures are freed. Otherwise, the structures will be freed | |
180 | when the device is released. | |
181 | ||
182 | ======================================================================*/ | |
183 | ||
fba395ee | 184 | static void airo_detach(struct pcmcia_device *link) |
1da177e4 | 185 | { |
1da177e4 | 186 | DEBUG(0, "airo_detach(0x%p)\n", link); |
b4635811 | 187 | |
e2d40963 | 188 | airo_release(link); |
b4635811 | 189 | |
1da177e4 LT |
190 | if ( ((local_info_t*)link->priv)->eth_dev ) { |
191 | stop_airo_card( ((local_info_t*)link->priv)->eth_dev, 0 ); | |
192 | } | |
cc3b4866 DB |
193 | ((local_info_t*)link->priv)->eth_dev = NULL; |
194 | ||
b4558ea9 | 195 | kfree(link->priv); |
1da177e4 LT |
196 | } /* airo_detach */ |
197 | ||
198 | /*====================================================================== | |
199 | ||
200 | airo_config() is scheduled to run after a CARD_INSERTION event | |
201 | is received, to configure the PCMCIA socket, and to make the | |
202 | device available to the system. | |
203 | ||
204 | ======================================================================*/ | |
205 | ||
206 | #define CS_CHECK(fn, ret) \ | |
207 | do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) | |
208 | ||
15b99ac1 | 209 | static int airo_config(struct pcmcia_device *link) |
1da177e4 | 210 | { |
1da177e4 LT |
211 | tuple_t tuple; |
212 | cisparse_t parse; | |
213 | local_info_t *dev; | |
214 | int last_fn, last_ret; | |
215 | u_char buf[64]; | |
216 | win_req_t req; | |
217 | memreq_t map; | |
fba395ee | 218 | |
1da177e4 LT |
219 | dev = link->priv; |
220 | ||
221 | DEBUG(0, "airo_config(0x%p)\n", link); | |
222 | ||
223 | /* | |
224 | This reads the card's CONFIG tuple to find its configuration | |
225 | registers. | |
226 | */ | |
227 | tuple.DesiredTuple = CISTPL_CONFIG; | |
228 | tuple.Attributes = 0; | |
229 | tuple.TupleData = buf; | |
230 | tuple.TupleDataMax = sizeof(buf); | |
231 | tuple.TupleOffset = 0; | |
fba395ee DB |
232 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); |
233 | CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); | |
234 | CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); | |
1da177e4 LT |
235 | link->conf.ConfigBase = parse.config.base; |
236 | link->conf.Present = parse.config.rmask[0]; | |
e2d40963 | 237 | |
1da177e4 LT |
238 | /* |
239 | In this loop, we scan the CIS for configuration table entries, | |
240 | each of which describes a valid card configuration, including | |
241 | voltage, IO window, memory window, and interrupt settings. | |
242 | ||
243 | We make no assumptions about the card to be configured: we use | |
244 | just the information available in the CIS. In an ideal world, | |
245 | this would work for any PCMCIA card, but it requires a complete | |
246 | and accurate CIS. In practice, a driver usually "knows" most of | |
247 | these things without consulting the CIS, and most client drivers | |
248 | will only use the CIS to fill in implementation-defined details. | |
249 | */ | |
250 | tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
fba395ee | 251 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); |
1da177e4 LT |
252 | while (1) { |
253 | cistpl_cftable_entry_t dflt = { 0 }; | |
254 | cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); | |
fba395ee DB |
255 | if (pcmcia_get_tuple_data(link, &tuple) != 0 || |
256 | pcmcia_parse_tuple(link, &tuple, &parse) != 0) | |
1da177e4 LT |
257 | goto next_entry; |
258 | ||
259 | if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; | |
260 | if (cfg->index == 0) goto next_entry; | |
261 | link->conf.ConfigIndex = cfg->index; | |
262 | ||
263 | /* Does this card need audio output? */ | |
264 | if (cfg->flags & CISTPL_CFTABLE_AUDIO) { | |
265 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
266 | link->conf.Status = CCSR_AUDIO_ENA; | |
267 | } | |
268 | ||
269 | /* Use power settings for Vcc and Vpp if present */ | |
270 | /* Note that the CIS values need to be rescaled */ | |
1da177e4 | 271 | if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) |
70294b46 | 272 | link->conf.Vpp = |
1da177e4 LT |
273 | cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; |
274 | else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) | |
70294b46 | 275 | link->conf.Vpp = |
1da177e4 LT |
276 | dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; |
277 | ||
278 | /* Do we need to allocate an interrupt? */ | |
279 | if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) | |
280 | link->conf.Attributes |= CONF_ENABLE_IRQ; | |
281 | ||
282 | /* IO window settings */ | |
283 | link->io.NumPorts1 = link->io.NumPorts2 = 0; | |
284 | if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { | |
285 | cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; | |
286 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; | |
287 | if (!(io->flags & CISTPL_IO_8BIT)) | |
288 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; | |
289 | if (!(io->flags & CISTPL_IO_16BIT)) | |
290 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
291 | link->io.BasePort1 = io->win[0].base; | |
292 | link->io.NumPorts1 = io->win[0].len; | |
293 | if (io->nwin > 1) { | |
294 | link->io.Attributes2 = link->io.Attributes1; | |
295 | link->io.BasePort2 = io->win[1].base; | |
296 | link->io.NumPorts2 = io->win[1].len; | |
297 | } | |
298 | } | |
299 | ||
300 | /* This reserves IO space but doesn't actually enable it */ | |
fba395ee | 301 | if (pcmcia_request_io(link, &link->io) != 0) |
1da177e4 LT |
302 | goto next_entry; |
303 | ||
304 | /* | |
305 | Now set up a common memory window, if needed. There is room | |
fba395ee | 306 | in the struct pcmcia_device structure for one memory window handle, |
1da177e4 LT |
307 | but if the base addresses need to be saved, or if multiple |
308 | windows are needed, the info should go in the private data | |
309 | structure for this device. | |
310 | ||
311 | Note that the memory window base is a physical address, and | |
312 | needs to be mapped to virtual space with ioremap() before it | |
313 | is used. | |
314 | */ | |
315 | if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { | |
316 | cistpl_mem_t *mem = | |
317 | (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; | |
318 | req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; | |
319 | req.Base = mem->win[0].host_addr; | |
320 | req.Size = mem->win[0].len; | |
321 | req.AccessSpeed = 0; | |
fba395ee | 322 | if (pcmcia_request_window(&link, &req, &link->win) != 0) |
1da177e4 LT |
323 | goto next_entry; |
324 | map.Page = 0; map.CardOffset = mem->win[0].card_addr; | |
325 | if (pcmcia_map_mem_page(link->win, &map) != 0) | |
326 | goto next_entry; | |
327 | } | |
328 | /* If we got this far, we're cool! */ | |
329 | break; | |
330 | ||
331 | next_entry: | |
fba395ee | 332 | CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); |
1da177e4 LT |
333 | } |
334 | ||
335 | /* | |
336 | Allocate an interrupt line. Note that this does not assign a | |
337 | handler to the interrupt, unless the 'Handler' member of the | |
338 | irq structure is initialized. | |
339 | */ | |
340 | if (link->conf.Attributes & CONF_ENABLE_IRQ) | |
fba395ee | 341 | CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
1da177e4 LT |
342 | |
343 | /* | |
344 | This actually configures the PCMCIA socket -- setting up | |
345 | the I/O windows and the interrupt mapping, and putting the | |
346 | card and host interface into "Memory and IO" mode. | |
347 | */ | |
fba395ee | 348 | CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); |
1da177e4 LT |
349 | ((local_info_t*)link->priv)->eth_dev = |
350 | init_airo_card( link->irq.AssignedIRQ, | |
fba395ee | 351 | link->io.BasePort1, 1, &handle_to_dev(link) ); |
1da177e4 LT |
352 | if (!((local_info_t*)link->priv)->eth_dev) goto cs_failed; |
353 | ||
354 | /* | |
355 | At this point, the dev_node_t structure(s) need to be | |
fd238232 | 356 | initialized and arranged in a linked list at link->dev_node. |
1da177e4 LT |
357 | */ |
358 | strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name ); | |
359 | dev->node.major = dev->node.minor = 0; | |
fd238232 | 360 | link->dev_node = &dev->node; |
1da177e4 LT |
361 | |
362 | /* Finally, report what we've done */ | |
70294b46 DB |
363 | printk(KERN_INFO "%s: index 0x%02x: ", |
364 | dev->node.dev_name, link->conf.ConfigIndex); | |
365 | if (link->conf.Vpp) | |
366 | printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); | |
1da177e4 LT |
367 | if (link->conf.Attributes & CONF_ENABLE_IRQ) |
368 | printk(", irq %d", link->irq.AssignedIRQ); | |
369 | if (link->io.NumPorts1) | |
370 | printk(", io 0x%04x-0x%04x", link->io.BasePort1, | |
371 | link->io.BasePort1+link->io.NumPorts1-1); | |
372 | if (link->io.NumPorts2) | |
373 | printk(" & 0x%04x-0x%04x", link->io.BasePort2, | |
374 | link->io.BasePort2+link->io.NumPorts2-1); | |
375 | if (link->win) | |
376 | printk(", mem 0x%06lx-0x%06lx", req.Base, | |
377 | req.Base+req.Size-1); | |
378 | printk("\n"); | |
15b99ac1 DB |
379 | return 0; |
380 | ||
1da177e4 | 381 | cs_failed: |
fba395ee | 382 | cs_error(link, last_fn, last_ret); |
1da177e4 | 383 | airo_release(link); |
15b99ac1 | 384 | return -ENODEV; |
1da177e4 LT |
385 | } /* airo_config */ |
386 | ||
387 | /*====================================================================== | |
388 | ||
389 | After a card is removed, airo_release() will unregister the | |
390 | device, and release the PCMCIA configuration. If the device is | |
391 | still open, this will be postponed until it is closed. | |
392 | ||
393 | ======================================================================*/ | |
394 | ||
fba395ee | 395 | static void airo_release(struct pcmcia_device *link) |
1da177e4 LT |
396 | { |
397 | DEBUG(0, "airo_release(0x%p)\n", link); | |
fba395ee | 398 | pcmcia_disable_device(link); |
1da177e4 LT |
399 | } |
400 | ||
fba395ee | 401 | static int airo_suspend(struct pcmcia_device *link) |
98e4c28b | 402 | { |
98e4c28b DB |
403 | local_info_t *local = link->priv; |
404 | ||
e2d40963 | 405 | netif_device_detach(local->eth_dev); |
98e4c28b DB |
406 | |
407 | return 0; | |
408 | } | |
409 | ||
fba395ee | 410 | static int airo_resume(struct pcmcia_device *link) |
98e4c28b | 411 | { |
98e4c28b DB |
412 | local_info_t *local = link->priv; |
413 | ||
e2d40963 | 414 | if (link->open) { |
98e4c28b DB |
415 | reset_airo_card(local->eth_dev); |
416 | netif_device_attach(local->eth_dev); | |
417 | } | |
418 | ||
419 | return 0; | |
420 | } | |
421 | ||
7018d06d DB |
422 | static struct pcmcia_device_id airo_ids[] = { |
423 | PCMCIA_DEVICE_MANF_CARD(0x015f, 0x000a), | |
424 | PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0005), | |
425 | PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0007), | |
426 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0007), | |
427 | PCMCIA_DEVICE_NULL, | |
428 | }; | |
429 | MODULE_DEVICE_TABLE(pcmcia, airo_ids); | |
430 | ||
1da177e4 LT |
431 | static struct pcmcia_driver airo_driver = { |
432 | .owner = THIS_MODULE, | |
433 | .drv = { | |
434 | .name = "airo_cs", | |
435 | }, | |
15b99ac1 | 436 | .probe = airo_probe, |
cc3b4866 | 437 | .remove = airo_detach, |
7018d06d | 438 | .id_table = airo_ids, |
98e4c28b DB |
439 | .suspend = airo_suspend, |
440 | .resume = airo_resume, | |
1da177e4 LT |
441 | }; |
442 | ||
443 | static int airo_cs_init(void) | |
444 | { | |
445 | return pcmcia_register_driver(&airo_driver); | |
446 | } | |
447 | ||
448 | static void airo_cs_cleanup(void) | |
449 | { | |
450 | pcmcia_unregister_driver(&airo_driver); | |
1da177e4 LT |
451 | } |
452 | ||
453 | /* | |
454 | This program is free software; you can redistribute it and/or | |
455 | modify it under the terms of the GNU General Public License | |
456 | as published by the Free Software Foundation; either version 2 | |
457 | of the License, or (at your option) any later version. | |
458 | ||
459 | This program is distributed in the hope that it will be useful, | |
460 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
461 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
462 | GNU General Public License for more details. | |
463 | ||
464 | In addition: | |
465 | ||
466 | Redistribution and use in source and binary forms, with or without | |
467 | modification, are permitted provided that the following conditions | |
468 | are met: | |
469 | ||
470 | 1. Redistributions of source code must retain the above copyright | |
471 | notice, this list of conditions and the following disclaimer. | |
472 | 2. Redistributions in binary form must reproduce the above copyright | |
473 | notice, this list of conditions and the following disclaimer in the | |
474 | documentation and/or other materials provided with the distribution. | |
475 | 3. The name of the author may not be used to endorse or promote | |
476 | products derived from this software without specific prior written | |
477 | permission. | |
478 | ||
479 | THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR | |
480 | IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
481 | WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
482 | ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
483 | INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
484 | (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
485 | SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
486 | HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
487 | STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
488 | IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
489 | POSSIBILITY OF SUCH DAMAGE. | |
490 | */ | |
491 | ||
492 | module_init(airo_cs_init); | |
493 | module_exit(airo_cs_cleanup); |