Commit | Line | Data |
---|---|---|
cd28ab6a SH |
1 | /* |
2 | * New driver for Marvell Yukon 2 chipset. | |
3 | * Based on earlier sk98lin, and skge driver. | |
4 | * | |
5 | * This driver intentionally does not support all the features | |
6 | * of the original driver such as link fail-over and link management because | |
7 | * those should be done at higher levels. | |
8 | * | |
9 | * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org> | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License as published by | |
798b6b19 | 13 | * the Free Software Foundation; either version 2 of the License. |
cd28ab6a SH |
14 | * |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
793b883e | 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
cd28ab6a SH |
18 | * GNU General Public License for more details. |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
23 | */ | |
24 | ||
793b883e | 25 | #include <linux/crc32.h> |
cd28ab6a | 26 | #include <linux/kernel.h> |
cd28ab6a SH |
27 | #include <linux/module.h> |
28 | #include <linux/netdevice.h> | |
d0bbccfa | 29 | #include <linux/dma-mapping.h> |
cd28ab6a SH |
30 | #include <linux/etherdevice.h> |
31 | #include <linux/ethtool.h> | |
32 | #include <linux/pci.h> | |
33 | #include <linux/ip.h> | |
c9bdd4b5 | 34 | #include <net/ip.h> |
cd28ab6a SH |
35 | #include <linux/tcp.h> |
36 | #include <linux/in.h> | |
37 | #include <linux/delay.h> | |
91c86df5 | 38 | #include <linux/workqueue.h> |
d1f13708 | 39 | #include <linux/if_vlan.h> |
d70cd51a | 40 | #include <linux/prefetch.h> |
3cf26753 | 41 | #include <linux/debugfs.h> |
ef743d33 | 42 | #include <linux/mii.h> |
cd28ab6a SH |
43 | |
44 | #include <asm/irq.h> | |
45 | ||
d1f13708 | 46 | #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) |
47 | #define SKY2_VLAN_TAG_USED 1 | |
48 | #endif | |
49 | ||
cd28ab6a SH |
50 | #include "sky2.h" |
51 | ||
52 | #define DRV_NAME "sky2" | |
ac958154 | 53 | #define DRV_VERSION "1.26" |
cd28ab6a SH |
54 | #define PFX DRV_NAME " " |
55 | ||
56 | /* | |
57 | * The Yukon II chipset takes 64 bit command blocks (called list elements) | |
58 | * that are organized into three (receive, transmit, status) different rings | |
14d0263f | 59 | * similar to Tigon3. |
cd28ab6a SH |
60 | */ |
61 | ||
14d0263f | 62 | #define RX_LE_SIZE 1024 |
cd28ab6a | 63 | #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) |
14d0263f | 64 | #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2) |
13210ce5 | 65 | #define RX_DEF_PENDING RX_MAX_PENDING |
793b883e | 66 | |
ee5f68fe | 67 | /* This is the worst case number of transmit list elements for a single skb: |
07e31637 SH |
68 | VLAN:GSO + CKSUM + Data + skb_frags * DMA */ |
69 | #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1)) | |
e9c1be80 | 70 | #define TX_MIN_PENDING (MAX_SKB_TX_LE+1) |
ee5f68fe SH |
71 | #define TX_MAX_PENDING 4096 |
72 | #define TX_DEF_PENDING 127 | |
cd28ab6a | 73 | |
793b883e | 74 | #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ |
cd28ab6a | 75 | #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) |
cd28ab6a SH |
76 | #define TX_WATCHDOG (5 * HZ) |
77 | #define NAPI_WEIGHT 64 | |
78 | #define PHY_RETRIES 1000 | |
79 | ||
f4331a6d SH |
80 | #define SKY2_EEPROM_MAGIC 0x9955aabb |
81 | ||
82 | ||
cb5d9547 SH |
83 | #define RING_NEXT(x,s) (((x)+1) & ((s)-1)) |
84 | ||
cd28ab6a | 85 | static const u32 default_msg = |
793b883e SH |
86 | NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK |
87 | | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR | |
3be92a70 | 88 | | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN; |
cd28ab6a | 89 | |
793b883e | 90 | static int debug = -1; /* defaults above */ |
cd28ab6a SH |
91 | module_param(debug, int, 0); |
92 | MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); | |
93 | ||
14d0263f | 94 | static int copybreak __read_mostly = 128; |
bdb5c58e SH |
95 | module_param(copybreak, int, 0); |
96 | MODULE_PARM_DESC(copybreak, "Receive copy threshold"); | |
97 | ||
fb2690a9 SH |
98 | static int disable_msi = 0; |
99 | module_param(disable_msi, int, 0); | |
100 | MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); | |
101 | ||
e6cac9ba | 102 | static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = { |
e5b74c7d SH |
103 | { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */ |
104 | { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ | |
e30a4ac2 | 105 | { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */ |
2d2a3871 | 106 | { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */ |
2f4a66ad | 107 | { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */ |
508f89e7 | 108 | { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */ |
f1a0b6f5 | 109 | { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */ |
e5b74c7d SH |
110 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */ |
111 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */ | |
112 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */ | |
113 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */ | |
114 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */ | |
115 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */ | |
116 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */ | |
117 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */ | |
118 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */ | |
119 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */ | |
120 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ | |
121 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ | |
05745c4a | 122 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ |
a3b4fced | 123 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */ |
e5b74c7d | 124 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ |
5a37a68d | 125 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */ |
05745c4a | 126 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ |
e5b74c7d SH |
127 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */ |
128 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */ | |
129 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */ | |
130 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */ | |
131 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */ | |
05745c4a | 132 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */ |
e5b74c7d SH |
133 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */ |
134 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */ | |
135 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */ | |
f1a0b6f5 SH |
136 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */ |
137 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */ | |
69161611 | 138 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */ |
5a37a68d | 139 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */ |
ed4d4161 SH |
140 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */ |
141 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */ | |
0ce8b98d | 142 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */ |
0f5aac70 | 143 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */ |
cd28ab6a SH |
144 | { 0 } |
145 | }; | |
793b883e | 146 | |
cd28ab6a SH |
147 | MODULE_DEVICE_TABLE(pci, sky2_id_table); |
148 | ||
149 | /* Avoid conditionals by using array */ | |
150 | static const unsigned txqaddr[] = { Q_XA1, Q_XA2 }; | |
151 | static const unsigned rxqaddr[] = { Q_R1, Q_R2 }; | |
f4ea431b | 152 | static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 }; |
cd28ab6a | 153 | |
d1b139c0 SH |
154 | static void sky2_set_multicast(struct net_device *dev); |
155 | ||
af043aa5 | 156 | /* Access to PHY via serial interconnect */ |
ef743d33 | 157 | static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) |
cd28ab6a SH |
158 | { |
159 | int i; | |
160 | ||
161 | gma_write16(hw, port, GM_SMI_DATA, val); | |
162 | gma_write16(hw, port, GM_SMI_CTRL, | |
163 | GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); | |
164 | ||
165 | for (i = 0; i < PHY_RETRIES; i++) { | |
af043aa5 SH |
166 | u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL); |
167 | if (ctrl == 0xffff) | |
168 | goto io_error; | |
169 | ||
170 | if (!(ctrl & GM_SMI_CT_BUSY)) | |
ef743d33 | 171 | return 0; |
af043aa5 SH |
172 | |
173 | udelay(10); | |
cd28ab6a | 174 | } |
ef743d33 | 175 | |
af043aa5 | 176 | dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name); |
ef743d33 | 177 | return -ETIMEDOUT; |
af043aa5 SH |
178 | |
179 | io_error: | |
180 | dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name); | |
181 | return -EIO; | |
cd28ab6a SH |
182 | } |
183 | ||
ef743d33 | 184 | static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val) |
cd28ab6a SH |
185 | { |
186 | int i; | |
187 | ||
793b883e | 188 | gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) |
cd28ab6a SH |
189 | | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); |
190 | ||
191 | for (i = 0; i < PHY_RETRIES; i++) { | |
af043aa5 SH |
192 | u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL); |
193 | if (ctrl == 0xffff) | |
194 | goto io_error; | |
195 | ||
196 | if (ctrl & GM_SMI_CT_RD_VAL) { | |
ef743d33 | 197 | *val = gma_read16(hw, port, GM_SMI_DATA); |
198 | return 0; | |
199 | } | |
200 | ||
af043aa5 | 201 | udelay(10); |
cd28ab6a SH |
202 | } |
203 | ||
af043aa5 | 204 | dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name); |
ef743d33 | 205 | return -ETIMEDOUT; |
af043aa5 SH |
206 | io_error: |
207 | dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name); | |
208 | return -EIO; | |
ef743d33 | 209 | } |
210 | ||
af043aa5 | 211 | static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) |
ef743d33 | 212 | { |
213 | u16 v; | |
af043aa5 | 214 | __gm_phy_read(hw, port, reg, &v); |
ef743d33 | 215 | return v; |
cd28ab6a SH |
216 | } |
217 | ||
5afa0a9c | 218 | |
ae306cca SH |
219 | static void sky2_power_on(struct sky2_hw *hw) |
220 | { | |
221 | /* switch power to VCC (WA for VAUX problem) */ | |
222 | sky2_write8(hw, B0_POWER_CTRL, | |
223 | PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); | |
5afa0a9c | 224 | |
ae306cca SH |
225 | /* disable Core Clock Division, */ |
226 | sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS); | |
d3bcfbeb | 227 | |
ae306cca SH |
228 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) |
229 | /* enable bits are inverted */ | |
230 | sky2_write8(hw, B2_Y2_CLK_GATE, | |
231 | Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | | |
232 | Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | | |
233 | Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); | |
234 | else | |
235 | sky2_write8(hw, B2_Y2_CLK_GATE, 0); | |
977bdf06 | 236 | |
ea76e635 | 237 | if (hw->flags & SKY2_HW_ADV_POWER_CTL) { |
fc99fe06 | 238 | u32 reg; |
5afa0a9c | 239 | |
b32f40c4 | 240 | sky2_pci_write32(hw, PCI_DEV_REG3, 0); |
b2345773 | 241 | |
b32f40c4 | 242 | reg = sky2_pci_read32(hw, PCI_DEV_REG4); |
fc99fe06 SH |
243 | /* set all bits to 0 except bits 15..12 and 8 */ |
244 | reg &= P_ASPM_CONTROL_MSK; | |
b32f40c4 | 245 | sky2_pci_write32(hw, PCI_DEV_REG4, reg); |
fc99fe06 | 246 | |
b32f40c4 | 247 | reg = sky2_pci_read32(hw, PCI_DEV_REG5); |
fc99fe06 SH |
248 | /* set all bits to 0 except bits 28 & 27 */ |
249 | reg &= P_CTL_TIM_VMAIN_AV_MSK; | |
b32f40c4 | 250 | sky2_pci_write32(hw, PCI_DEV_REG5, reg); |
fc99fe06 | 251 | |
b32f40c4 | 252 | sky2_pci_write32(hw, PCI_CFG_REG_1, 0); |
8f70920f SH |
253 | |
254 | /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */ | |
255 | reg = sky2_read32(hw, B2_GP_IO); | |
256 | reg |= GLB_GPIO_STAT_RACE_DIS; | |
257 | sky2_write32(hw, B2_GP_IO, reg); | |
b2345773 SH |
258 | |
259 | sky2_read32(hw, B2_GP_IO); | |
5afa0a9c | 260 | } |
10547ae2 SH |
261 | |
262 | /* Turn on "driver loaded" LED */ | |
263 | sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON); | |
ae306cca | 264 | } |
5afa0a9c | 265 | |
ae306cca SH |
266 | static void sky2_power_aux(struct sky2_hw *hw) |
267 | { | |
268 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) | |
269 | sky2_write8(hw, B2_Y2_CLK_GATE, 0); | |
270 | else | |
271 | /* enable bits are inverted */ | |
272 | sky2_write8(hw, B2_Y2_CLK_GATE, | |
273 | Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | | |
274 | Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | | |
275 | Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); | |
276 | ||
c23ddf8f SH |
277 | /* switch power to VAUX if supported and PME from D3cold */ |
278 | if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) && | |
279 | pci_pme_capable(hw->pdev, PCI_D3cold)) | |
ae306cca SH |
280 | sky2_write8(hw, B0_POWER_CTRL, |
281 | (PC_VAUX_ENA | PC_VCC_ENA | | |
282 | PC_VAUX_ON | PC_VCC_OFF)); | |
10547ae2 SH |
283 | |
284 | /* turn off "driver loaded LED" */ | |
285 | sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF); | |
5afa0a9c | 286 | } |
287 | ||
d3bcfbeb | 288 | static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) |
cd28ab6a SH |
289 | { |
290 | u16 reg; | |
291 | ||
292 | /* disable all GMAC IRQ's */ | |
293 | sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0); | |
793b883e | 294 | |
cd28ab6a SH |
295 | gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ |
296 | gma_write16(hw, port, GM_MC_ADDR_H2, 0); | |
297 | gma_write16(hw, port, GM_MC_ADDR_H3, 0); | |
298 | gma_write16(hw, port, GM_MC_ADDR_H4, 0); | |
299 | ||
300 | reg = gma_read16(hw, port, GM_RX_CTRL); | |
301 | reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA; | |
302 | gma_write16(hw, port, GM_RX_CTRL, reg); | |
303 | } | |
304 | ||
16ad91e1 SH |
305 | /* flow control to advertise bits */ |
306 | static const u16 copper_fc_adv[] = { | |
307 | [FC_NONE] = 0, | |
308 | [FC_TX] = PHY_M_AN_ASP, | |
309 | [FC_RX] = PHY_M_AN_PC, | |
310 | [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP, | |
311 | }; | |
312 | ||
313 | /* flow control to advertise bits when using 1000BaseX */ | |
314 | static const u16 fiber_fc_adv[] = { | |
df3fe1f3 | 315 | [FC_NONE] = PHY_M_P_NO_PAUSE_X, |
16ad91e1 SH |
316 | [FC_TX] = PHY_M_P_ASYM_MD_X, |
317 | [FC_RX] = PHY_M_P_SYM_MD_X, | |
df3fe1f3 | 318 | [FC_BOTH] = PHY_M_P_BOTH_MD_X, |
16ad91e1 SH |
319 | }; |
320 | ||
321 | /* flow control to GMA disable bits */ | |
322 | static const u16 gm_fc_disable[] = { | |
323 | [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS, | |
324 | [FC_TX] = GM_GPCR_FC_RX_DIS, | |
325 | [FC_RX] = GM_GPCR_FC_TX_DIS, | |
326 | [FC_BOTH] = 0, | |
327 | }; | |
328 | ||
329 | ||
cd28ab6a SH |
330 | static void sky2_phy_init(struct sky2_hw *hw, unsigned port) |
331 | { | |
332 | struct sky2_port *sky2 = netdev_priv(hw->dev[port]); | |
2eaba1a2 | 333 | u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; |
cd28ab6a | 334 | |
0ea065e5 | 335 | if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) && |
ea76e635 | 336 | !(hw->flags & SKY2_HW_NEWER_PHY)) { |
cd28ab6a SH |
337 | u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); |
338 | ||
339 | ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | | |
793b883e | 340 | PHY_M_EC_MAC_S_MSK); |
cd28ab6a SH |
341 | ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); |
342 | ||
53419c68 | 343 | /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */ |
cd28ab6a | 344 | if (hw->chip_id == CHIP_ID_YUKON_EC) |
53419c68 | 345 | /* set downshift counter to 3x and enable downshift */ |
cd28ab6a SH |
346 | ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA; |
347 | else | |
53419c68 SH |
348 | /* set master & slave downshift counter to 1x */ |
349 | ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); | |
cd28ab6a SH |
350 | |
351 | gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); | |
352 | } | |
353 | ||
354 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
b89165f2 | 355 | if (sky2_is_copper(hw)) { |
05745c4a | 356 | if (!(hw->flags & SKY2_HW_GIGABIT)) { |
cd28ab6a SH |
357 | /* enable automatic crossover */ |
358 | ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; | |
6d3105d5 SH |
359 | |
360 | if (hw->chip_id == CHIP_ID_YUKON_FE_P && | |
361 | hw->chip_rev == CHIP_REV_YU_FE2_A0) { | |
362 | u16 spec; | |
363 | ||
364 | /* Enable Class A driver for FE+ A0 */ | |
365 | spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2); | |
366 | spec |= PHY_M_FESC_SEL_CL_A; | |
367 | gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec); | |
368 | } | |
cd28ab6a SH |
369 | } else { |
370 | /* disable energy detect */ | |
371 | ctrl &= ~PHY_M_PC_EN_DET_MSK; | |
372 | ||
373 | /* enable automatic crossover */ | |
374 | ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO); | |
375 | ||
53419c68 | 376 | /* downshift on PHY 88E1112 and 88E1149 is changed */ |
8e95a202 JP |
377 | if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) && |
378 | (hw->flags & SKY2_HW_NEWER_PHY)) { | |
53419c68 | 379 | /* set downshift counter to 3x and enable downshift */ |
cd28ab6a SH |
380 | ctrl &= ~PHY_M_PC_DSC_MSK; |
381 | ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; | |
382 | } | |
383 | } | |
cd28ab6a SH |
384 | } else { |
385 | /* workaround for deviation #4.88 (CRC errors) */ | |
386 | /* disable Automatic Crossover */ | |
387 | ||
388 | ctrl &= ~PHY_M_PC_MDIX_MSK; | |
b89165f2 | 389 | } |
cd28ab6a | 390 | |
b89165f2 SH |
391 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); |
392 | ||
393 | /* special setup for PHY 88E1112 Fiber */ | |
ea76e635 | 394 | if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) { |
b89165f2 | 395 | pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); |
cd28ab6a | 396 | |
b89165f2 SH |
397 | /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ |
398 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); | |
399 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
400 | ctrl &= ~PHY_M_MAC_MD_MSK; | |
401 | ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); | |
402 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); | |
403 | ||
404 | if (hw->pmd_type == 'P') { | |
cd28ab6a SH |
405 | /* select page 1 to access Fiber registers */ |
406 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1); | |
b89165f2 SH |
407 | |
408 | /* for SFP-module set SIGDET polarity to low */ | |
409 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
410 | ctrl |= PHY_M_FIB_SIGD_POL; | |
34dd962b | 411 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); |
cd28ab6a | 412 | } |
b89165f2 SH |
413 | |
414 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); | |
cd28ab6a SH |
415 | } |
416 | ||
7800fddc | 417 | ctrl = PHY_CT_RESET; |
cd28ab6a SH |
418 | ct1000 = 0; |
419 | adv = PHY_AN_CSMA; | |
2eaba1a2 | 420 | reg = 0; |
cd28ab6a | 421 | |
0ea065e5 | 422 | if (sky2->flags & SKY2_FLAG_AUTO_SPEED) { |
b89165f2 | 423 | if (sky2_is_copper(hw)) { |
cd28ab6a SH |
424 | if (sky2->advertising & ADVERTISED_1000baseT_Full) |
425 | ct1000 |= PHY_M_1000C_AFD; | |
426 | if (sky2->advertising & ADVERTISED_1000baseT_Half) | |
427 | ct1000 |= PHY_M_1000C_AHD; | |
428 | if (sky2->advertising & ADVERTISED_100baseT_Full) | |
429 | adv |= PHY_M_AN_100_FD; | |
430 | if (sky2->advertising & ADVERTISED_100baseT_Half) | |
431 | adv |= PHY_M_AN_100_HD; | |
432 | if (sky2->advertising & ADVERTISED_10baseT_Full) | |
433 | adv |= PHY_M_AN_10_FD; | |
434 | if (sky2->advertising & ADVERTISED_10baseT_Half) | |
435 | adv |= PHY_M_AN_10_HD; | |
709c6e7b | 436 | |
b89165f2 SH |
437 | } else { /* special defines for FIBER (88E1040S only) */ |
438 | if (sky2->advertising & ADVERTISED_1000baseT_Full) | |
439 | adv |= PHY_M_AN_1000X_AFD; | |
440 | if (sky2->advertising & ADVERTISED_1000baseT_Half) | |
441 | adv |= PHY_M_AN_1000X_AHD; | |
709c6e7b | 442 | } |
cd28ab6a SH |
443 | |
444 | /* Restart Auto-negotiation */ | |
445 | ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; | |
446 | } else { | |
447 | /* forced speed/duplex settings */ | |
448 | ct1000 = PHY_M_1000C_MSE; | |
449 | ||
0ea065e5 SH |
450 | /* Disable auto update for duplex flow control and duplex */ |
451 | reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS; | |
cd28ab6a SH |
452 | |
453 | switch (sky2->speed) { | |
454 | case SPEED_1000: | |
455 | ctrl |= PHY_CT_SP1000; | |
2eaba1a2 | 456 | reg |= GM_GPCR_SPEED_1000; |
cd28ab6a SH |
457 | break; |
458 | case SPEED_100: | |
459 | ctrl |= PHY_CT_SP100; | |
2eaba1a2 | 460 | reg |= GM_GPCR_SPEED_100; |
cd28ab6a SH |
461 | break; |
462 | } | |
463 | ||
2eaba1a2 SH |
464 | if (sky2->duplex == DUPLEX_FULL) { |
465 | reg |= GM_GPCR_DUP_FULL; | |
466 | ctrl |= PHY_CT_DUP_MD; | |
16ad91e1 SH |
467 | } else if (sky2->speed < SPEED_1000) |
468 | sky2->flow_mode = FC_NONE; | |
0ea065e5 | 469 | } |
2eaba1a2 | 470 | |
0ea065e5 SH |
471 | if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) { |
472 | if (sky2_is_copper(hw)) | |
473 | adv |= copper_fc_adv[sky2->flow_mode]; | |
474 | else | |
475 | adv |= fiber_fc_adv[sky2->flow_mode]; | |
476 | } else { | |
477 | reg |= GM_GPCR_AU_FCT_DIS; | |
16ad91e1 | 478 | reg |= gm_fc_disable[sky2->flow_mode]; |
2eaba1a2 SH |
479 | |
480 | /* Forward pause packets to GMAC? */ | |
16ad91e1 | 481 | if (sky2->flow_mode & FC_RX) |
2eaba1a2 SH |
482 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); |
483 | else | |
484 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); | |
cd28ab6a SH |
485 | } |
486 | ||
2eaba1a2 SH |
487 | gma_write16(hw, port, GM_GP_CTRL, reg); |
488 | ||
05745c4a | 489 | if (hw->flags & SKY2_HW_GIGABIT) |
cd28ab6a SH |
490 | gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); |
491 | ||
492 | gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); | |
493 | gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); | |
494 | ||
495 | /* Setup Phy LED's */ | |
496 | ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); | |
497 | ledover = 0; | |
498 | ||
499 | switch (hw->chip_id) { | |
500 | case CHIP_ID_YUKON_FE: | |
501 | /* on 88E3082 these bits are at 11..9 (shifted left) */ | |
502 | ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; | |
503 | ||
504 | ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR); | |
505 | ||
506 | /* delete ACT LED control bits */ | |
507 | ctrl &= ~PHY_M_FELP_LED1_MSK; | |
508 | /* change ACT LED control to blink mode */ | |
509 | ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL); | |
510 | gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); | |
511 | break; | |
512 | ||
05745c4a SH |
513 | case CHIP_ID_YUKON_FE_P: |
514 | /* Enable Link Partner Next Page */ | |
515 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
516 | ctrl |= PHY_M_PC_ENA_LIP_NP; | |
517 | ||
518 | /* disable Energy Detect and enable scrambler */ | |
519 | ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB); | |
520 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); | |
521 | ||
522 | /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */ | |
523 | ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) | | |
524 | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) | | |
525 | PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED); | |
526 | ||
527 | gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); | |
528 | break; | |
529 | ||
cd28ab6a | 530 | case CHIP_ID_YUKON_XL: |
793b883e | 531 | pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); |
cd28ab6a SH |
532 | |
533 | /* select page 3 to access LED control register */ | |
534 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); | |
535 | ||
536 | /* set LED Function Control register */ | |
ed6d32c7 SH |
537 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, |
538 | (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ | |
539 | PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */ | |
540 | PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ | |
541 | PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */ | |
cd28ab6a SH |
542 | |
543 | /* set Polarity Control register */ | |
544 | gm_phy_write(hw, port, PHY_MARV_PHY_STAT, | |
793b883e SH |
545 | (PHY_M_POLC_LS1_P_MIX(4) | |
546 | PHY_M_POLC_IS0_P_MIX(4) | | |
547 | PHY_M_POLC_LOS_CTRL(2) | | |
548 | PHY_M_POLC_INIT_CTRL(2) | | |
549 | PHY_M_POLC_STA1_CTRL(2) | | |
550 | PHY_M_POLC_STA0_CTRL(2))); | |
cd28ab6a SH |
551 | |
552 | /* restore page register */ | |
793b883e | 553 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); |
cd28ab6a | 554 | break; |
93745494 | 555 | |
ed6d32c7 | 556 | case CHIP_ID_YUKON_EC_U: |
93745494 | 557 | case CHIP_ID_YUKON_EX: |
ed4d4161 | 558 | case CHIP_ID_YUKON_SUPR: |
ed6d32c7 SH |
559 | pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); |
560 | ||
561 | /* select page 3 to access LED control register */ | |
562 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); | |
563 | ||
564 | /* set LED Function Control register */ | |
565 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
566 | (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ | |
567 | PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */ | |
568 | PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ | |
569 | PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */ | |
570 | ||
571 | /* set Blink Rate in LED Timer Control Register */ | |
572 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, | |
573 | ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS)); | |
574 | /* restore page register */ | |
575 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); | |
576 | break; | |
cd28ab6a SH |
577 | |
578 | default: | |
579 | /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ | |
580 | ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; | |
a84d0a3d | 581 | |
cd28ab6a | 582 | /* turn off the Rx LED (LED_RX) */ |
a84d0a3d | 583 | ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); |
cd28ab6a SH |
584 | } |
585 | ||
0ce8b98d | 586 | if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) { |
977bdf06 | 587 | /* apply fixes in PHY AFE */ |
ed6d32c7 SH |
588 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255); |
589 | ||
977bdf06 | 590 | /* increase differential signal amplitude in 10BASE-T */ |
ed6d32c7 SH |
591 | gm_phy_write(hw, port, 0x18, 0xaa99); |
592 | gm_phy_write(hw, port, 0x17, 0x2011); | |
cd28ab6a | 593 | |
0ce8b98d SH |
594 | if (hw->chip_id == CHIP_ID_YUKON_EC_U) { |
595 | /* fix for IEEE A/B Symmetry failure in 1000BASE-T */ | |
596 | gm_phy_write(hw, port, 0x18, 0xa204); | |
597 | gm_phy_write(hw, port, 0x17, 0x2002); | |
598 | } | |
977bdf06 SH |
599 | |
600 | /* set page register to 0 */ | |
9467a8fc | 601 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); |
05745c4a SH |
602 | } else if (hw->chip_id == CHIP_ID_YUKON_FE_P && |
603 | hw->chip_rev == CHIP_REV_YU_FE2_A0) { | |
604 | /* apply workaround for integrated resistors calibration */ | |
605 | gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17); | |
606 | gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60); | |
0f5aac70 SH |
607 | } else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) { |
608 | /* apply fixes in PHY AFE */ | |
609 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff); | |
610 | ||
611 | /* apply RDAC termination workaround */ | |
612 | gm_phy_write(hw, port, 24, 0x2800); | |
613 | gm_phy_write(hw, port, 23, 0x2001); | |
614 | ||
615 | /* set page register back to 0 */ | |
616 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); | |
e1a74b37 SH |
617 | } else if (hw->chip_id != CHIP_ID_YUKON_EX && |
618 | hw->chip_id < CHIP_ID_YUKON_SUPR) { | |
05745c4a | 619 | /* no effect on Yukon-XL */ |
977bdf06 | 620 | gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); |
cd28ab6a | 621 | |
8e95a202 JP |
622 | if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) || |
623 | sky2->speed == SPEED_100) { | |
977bdf06 | 624 | /* turn on 100 Mbps LED (LED_LINK100) */ |
a84d0a3d | 625 | ledover |= PHY_M_LED_MO_100(MO_LED_ON); |
977bdf06 | 626 | } |
cd28ab6a | 627 | |
977bdf06 SH |
628 | if (ledover) |
629 | gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); | |
630 | ||
631 | } | |
2eaba1a2 | 632 | |
d571b694 | 633 | /* Enable phy interrupt on auto-negotiation complete (or link up) */ |
0ea065e5 | 634 | if (sky2->flags & SKY2_FLAG_AUTO_SPEED) |
cd28ab6a SH |
635 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); |
636 | else | |
637 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); | |
638 | } | |
639 | ||
b96936da SH |
640 | static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; |
641 | static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA }; | |
642 | ||
643 | static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) | |
d3bcfbeb | 644 | { |
645 | u32 reg1; | |
d3bcfbeb | 646 | |
a40ccc68 | 647 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
b32f40c4 | 648 | reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); |
b96936da | 649 | reg1 &= ~phy_power[port]; |
d3bcfbeb | 650 | |
b96936da | 651 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) |
ff35164e SH |
652 | reg1 |= coma_mode[port]; |
653 | ||
b32f40c4 | 654 | sky2_pci_write32(hw, PCI_DEV_REG1, reg1); |
a40ccc68 | 655 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
82637e80 | 656 | sky2_pci_read32(hw, PCI_DEV_REG1); |
f71eb1a2 SH |
657 | |
658 | if (hw->chip_id == CHIP_ID_YUKON_FE) | |
659 | gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE); | |
660 | else if (hw->flags & SKY2_HW_ADV_POWER_CTL) | |
661 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); | |
b96936da | 662 | } |
167f53d0 | 663 | |
b96936da SH |
664 | static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) |
665 | { | |
666 | u32 reg1; | |
db99b988 SH |
667 | u16 ctrl; |
668 | ||
669 | /* release GPHY Control reset */ | |
670 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); | |
671 | ||
672 | /* release GMAC reset */ | |
673 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); | |
674 | ||
675 | if (hw->flags & SKY2_HW_NEWER_PHY) { | |
676 | /* select page 2 to access MAC control register */ | |
677 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); | |
678 | ||
679 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
680 | /* allow GMII Power Down */ | |
681 | ctrl &= ~PHY_M_MAC_GMIF_PUP; | |
682 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); | |
683 | ||
684 | /* set page register back to 0 */ | |
685 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); | |
686 | } | |
687 | ||
688 | /* setup General Purpose Control Register */ | |
689 | gma_write16(hw, port, GM_GP_CTRL, | |
0ea065e5 SH |
690 | GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | |
691 | GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS | | |
692 | GM_GPCR_AU_SPD_DIS); | |
db99b988 SH |
693 | |
694 | if (hw->chip_id != CHIP_ID_YUKON_EC) { | |
695 | if (hw->chip_id == CHIP_ID_YUKON_EC_U) { | |
e484d5f5 RW |
696 | /* select page 2 to access MAC control register */ |
697 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); | |
db99b988 | 698 | |
e484d5f5 | 699 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); |
db99b988 SH |
700 | /* enable Power Down */ |
701 | ctrl |= PHY_M_PC_POW_D_ENA; | |
702 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); | |
e484d5f5 RW |
703 | |
704 | /* set page register back to 0 */ | |
705 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); | |
db99b988 SH |
706 | } |
707 | ||
708 | /* set IEEE compatible Power Down Mode (dev. #4.99) */ | |
709 | gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN); | |
710 | } | |
b96936da | 711 | |
a40ccc68 | 712 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
b96936da | 713 | reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); |
db99b988 | 714 | reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */ |
b96936da | 715 | sky2_pci_write32(hw, PCI_DEV_REG1, reg1); |
a40ccc68 | 716 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
d3bcfbeb | 717 | } |
718 | ||
1b537565 SH |
719 | /* Force a renegotiation */ |
720 | static void sky2_phy_reinit(struct sky2_port *sky2) | |
721 | { | |
e07b1aa8 | 722 | spin_lock_bh(&sky2->phy_lock); |
1b537565 | 723 | sky2_phy_init(sky2->hw, sky2->port); |
e07b1aa8 | 724 | spin_unlock_bh(&sky2->phy_lock); |
1b537565 SH |
725 | } |
726 | ||
e3173832 SH |
727 | /* Put device in state to listen for Wake On Lan */ |
728 | static void sky2_wol_init(struct sky2_port *sky2) | |
729 | { | |
730 | struct sky2_hw *hw = sky2->hw; | |
731 | unsigned port = sky2->port; | |
732 | enum flow_control save_mode; | |
733 | u16 ctrl; | |
734 | u32 reg1; | |
735 | ||
736 | /* Bring hardware out of reset */ | |
737 | sky2_write16(hw, B0_CTST, CS_RST_CLR); | |
738 | sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR); | |
739 | ||
740 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); | |
741 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); | |
742 | ||
743 | /* Force to 10/100 | |
744 | * sky2_reset will re-enable on resume | |
745 | */ | |
746 | save_mode = sky2->flow_mode; | |
747 | ctrl = sky2->advertising; | |
748 | ||
749 | sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); | |
750 | sky2->flow_mode = FC_NONE; | |
b96936da SH |
751 | |
752 | spin_lock_bh(&sky2->phy_lock); | |
753 | sky2_phy_power_up(hw, port); | |
754 | sky2_phy_init(hw, port); | |
755 | spin_unlock_bh(&sky2->phy_lock); | |
e3173832 SH |
756 | |
757 | sky2->flow_mode = save_mode; | |
758 | sky2->advertising = ctrl; | |
759 | ||
760 | /* Set GMAC to no flow control and auto update for speed/duplex */ | |
761 | gma_write16(hw, port, GM_GP_CTRL, | |
762 | GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA| | |
763 | GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS); | |
764 | ||
765 | /* Set WOL address */ | |
766 | memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR), | |
767 | sky2->netdev->dev_addr, ETH_ALEN); | |
768 | ||
769 | /* Turn on appropriate WOL control bits */ | |
770 | sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT); | |
771 | ctrl = 0; | |
772 | if (sky2->wol & WAKE_PHY) | |
773 | ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT; | |
774 | else | |
775 | ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT; | |
776 | ||
777 | if (sky2->wol & WAKE_MAGIC) | |
778 | ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT; | |
779 | else | |
a419aef8 | 780 | ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT; |
e3173832 SH |
781 | |
782 | ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT; | |
783 | sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl); | |
784 | ||
785 | /* Turn on legacy PCI-Express PME mode */ | |
b32f40c4 | 786 | reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); |
e3173832 | 787 | reg1 |= PCI_Y2_PME_LEGACY; |
b32f40c4 | 788 | sky2_pci_write32(hw, PCI_DEV_REG1, reg1); |
e3173832 SH |
789 | |
790 | /* block receiver */ | |
791 | sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); | |
792 | ||
793 | } | |
794 | ||
69161611 SH |
795 | static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port) |
796 | { | |
05745c4a SH |
797 | struct net_device *dev = hw->dev[port]; |
798 | ||
ed4d4161 SH |
799 | if ( (hw->chip_id == CHIP_ID_YUKON_EX && |
800 | hw->chip_rev != CHIP_REV_YU_EX_A0) || | |
877c8570 | 801 | hw->chip_id >= CHIP_ID_YUKON_FE_P) { |
ed4d4161 SH |
802 | /* Yukon-Extreme B0 and further Extreme devices */ |
803 | /* enable Store & Forward mode for TX */ | |
05745c4a | 804 | |
ed4d4161 SH |
805 | if (dev->mtu <= ETH_DATA_LEN) |
806 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), | |
807 | TX_JUMBO_DIS | TX_STFW_ENA); | |
69161611 | 808 | |
ed4d4161 SH |
809 | else |
810 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), | |
811 | TX_JUMBO_ENA| TX_STFW_ENA); | |
812 | } else { | |
813 | if (dev->mtu <= ETH_DATA_LEN) | |
814 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA); | |
815 | else { | |
816 | /* set Tx GMAC FIFO Almost Empty Threshold */ | |
817 | sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), | |
818 | (ECU_JUMBO_WM << 16) | ECU_AE_THR); | |
69161611 | 819 | |
ed4d4161 SH |
820 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS); |
821 | ||
822 | /* Can't do offload because of lack of store/forward */ | |
823 | dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM); | |
824 | } | |
69161611 SH |
825 | } |
826 | } | |
827 | ||
cd28ab6a SH |
828 | static void sky2_mac_init(struct sky2_hw *hw, unsigned port) |
829 | { | |
830 | struct sky2_port *sky2 = netdev_priv(hw->dev[port]); | |
831 | u16 reg; | |
25cccecc | 832 | u32 rx_reg; |
cd28ab6a SH |
833 | int i; |
834 | const u8 *addr = hw->dev[port]->dev_addr; | |
835 | ||
f350339c SH |
836 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); |
837 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); | |
cd28ab6a SH |
838 | |
839 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); | |
840 | ||
793b883e | 841 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) { |
cd28ab6a SH |
842 | /* WA DEV_472 -- looks like crossed wires on port 2 */ |
843 | /* clear GMAC 1 Control reset */ | |
844 | sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR); | |
845 | do { | |
846 | sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET); | |
847 | sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR); | |
848 | } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL || | |
849 | gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 || | |
850 | gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0); | |
851 | } | |
852 | ||
793b883e | 853 | sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC)); |
cd28ab6a | 854 | |
2eaba1a2 SH |
855 | /* Enable Transmit FIFO Underrun */ |
856 | sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); | |
857 | ||
e07b1aa8 | 858 | spin_lock_bh(&sky2->phy_lock); |
b96936da | 859 | sky2_phy_power_up(hw, port); |
cd28ab6a | 860 | sky2_phy_init(hw, port); |
e07b1aa8 | 861 | spin_unlock_bh(&sky2->phy_lock); |
cd28ab6a SH |
862 | |
863 | /* MIB clear */ | |
864 | reg = gma_read16(hw, port, GM_PHY_ADDR); | |
865 | gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); | |
866 | ||
43f2f104 SH |
867 | for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4) |
868 | gma_read16(hw, port, i); | |
cd28ab6a SH |
869 | gma_write16(hw, port, GM_PHY_ADDR, reg); |
870 | ||
871 | /* transmit control */ | |
872 | gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); | |
873 | ||
874 | /* receive control reg: unicast + multicast + no FCS */ | |
875 | gma_write16(hw, port, GM_RX_CTRL, | |
793b883e | 876 | GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); |
cd28ab6a SH |
877 | |
878 | /* transmit flow control */ | |
879 | gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); | |
880 | ||
881 | /* transmit parameter */ | |
882 | gma_write16(hw, port, GM_TX_PARAM, | |
883 | TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | | |
884 | TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | | |
885 | TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | | |
886 | TX_BACK_OFF_LIM(TX_BOF_LIM_DEF)); | |
887 | ||
888 | /* serial mode register */ | |
889 | reg = DATA_BLIND_VAL(DATA_BLIND_DEF) | | |
6b1a3aef | 890 | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); |
cd28ab6a | 891 | |
6b1a3aef | 892 | if (hw->dev[port]->mtu > ETH_DATA_LEN) |
cd28ab6a SH |
893 | reg |= GM_SMOD_JUMBO_ENA; |
894 | ||
895 | gma_write16(hw, port, GM_SERIAL_MODE, reg); | |
896 | ||
cd28ab6a SH |
897 | /* virtual address for data */ |
898 | gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr); | |
899 | ||
793b883e SH |
900 | /* physical address: used for pause frames */ |
901 | gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); | |
902 | ||
903 | /* ignore counter overflows */ | |
cd28ab6a SH |
904 | gma_write16(hw, port, GM_TX_IRQ_MSK, 0); |
905 | gma_write16(hw, port, GM_RX_IRQ_MSK, 0); | |
906 | gma_write16(hw, port, GM_TR_IRQ_MSK, 0); | |
907 | ||
908 | /* Configure Rx MAC FIFO */ | |
909 | sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); | |
25cccecc | 910 | rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON; |
05745c4a SH |
911 | if (hw->chip_id == CHIP_ID_YUKON_EX || |
912 | hw->chip_id == CHIP_ID_YUKON_FE_P) | |
25cccecc | 913 | rx_reg |= GMF_RX_OVER_ON; |
69161611 | 914 | |
25cccecc | 915 | sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg); |
cd28ab6a | 916 | |
798fdd07 SH |
917 | if (hw->chip_id == CHIP_ID_YUKON_XL) { |
918 | /* Hardware errata - clear flush mask */ | |
919 | sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0); | |
920 | } else { | |
921 | /* Flush Rx MAC FIFO on any flow control or error */ | |
922 | sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); | |
923 | } | |
cd28ab6a | 924 | |
8df9a876 | 925 | /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ |
05745c4a SH |
926 | reg = RX_GMF_FL_THR_DEF + 1; |
927 | /* Another magic mystery workaround from sk98lin */ | |
928 | if (hw->chip_id == CHIP_ID_YUKON_FE_P && | |
929 | hw->chip_rev == CHIP_REV_YU_FE2_A0) | |
930 | reg = 0x178; | |
931 | sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg); | |
cd28ab6a SH |
932 | |
933 | /* Configure Tx MAC FIFO */ | |
934 | sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); | |
935 | sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); | |
5a5b1ea0 | 936 | |
e0c28116 | 937 | /* On chips without ram buffer, pause is controled by MAC level */ |
39dbd958 | 938 | if (!(hw->flags & SKY2_HW_RAM_BUFFER)) { |
d6b54d24 | 939 | /* Pause threshold is scaled by 8 in bytes */ |
8e95a202 JP |
940 | if (hw->chip_id == CHIP_ID_YUKON_FE_P && |
941 | hw->chip_rev == CHIP_REV_YU_FE2_A0) | |
d6b54d24 SH |
942 | reg = 1568 / 8; |
943 | else | |
944 | reg = 1024 / 8; | |
945 | sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg); | |
946 | sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8); | |
b628ed98 | 947 | |
69161611 | 948 | sky2_set_tx_stfwd(hw, port); |
5a5b1ea0 | 949 | } |
950 | ||
e970d1f8 SH |
951 | if (hw->chip_id == CHIP_ID_YUKON_FE_P && |
952 | hw->chip_rev == CHIP_REV_YU_FE2_A0) { | |
953 | /* disable dynamic watermark */ | |
954 | reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA)); | |
955 | reg &= ~TX_DYN_WM_ENA; | |
956 | sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg); | |
957 | } | |
cd28ab6a SH |
958 | } |
959 | ||
67712901 SH |
960 | /* Assign Ram Buffer allocation to queue */ |
961 | static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space) | |
cd28ab6a | 962 | { |
67712901 SH |
963 | u32 end; |
964 | ||
965 | /* convert from K bytes to qwords used for hw register */ | |
966 | start *= 1024/8; | |
967 | space *= 1024/8; | |
968 | end = start + space - 1; | |
793b883e | 969 | |
cd28ab6a SH |
970 | sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); |
971 | sky2_write32(hw, RB_ADDR(q, RB_START), start); | |
972 | sky2_write32(hw, RB_ADDR(q, RB_END), end); | |
973 | sky2_write32(hw, RB_ADDR(q, RB_WP), start); | |
974 | sky2_write32(hw, RB_ADDR(q, RB_RP), start); | |
975 | ||
976 | if (q == Q_R1 || q == Q_R2) { | |
1c28f6ba | 977 | u32 tp = space - space/4; |
793b883e | 978 | |
1c28f6ba SH |
979 | /* On receive queue's set the thresholds |
980 | * give receiver priority when > 3/4 full | |
981 | * send pause when down to 2K | |
982 | */ | |
983 | sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp); | |
984 | sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2); | |
793b883e | 985 | |
1c28f6ba SH |
986 | tp = space - 2048/8; |
987 | sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp); | |
988 | sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4); | |
cd28ab6a SH |
989 | } else { |
990 | /* Enable store & forward on Tx queue's because | |
991 | * Tx FIFO is only 1K on Yukon | |
992 | */ | |
993 | sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD); | |
994 | } | |
995 | ||
996 | sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD); | |
793b883e | 997 | sky2_read8(hw, RB_ADDR(q, RB_CTRL)); |
cd28ab6a SH |
998 | } |
999 | ||
cd28ab6a | 1000 | /* Setup Bus Memory Interface */ |
af4ed7e6 | 1001 | static void sky2_qset(struct sky2_hw *hw, u16 q) |
cd28ab6a SH |
1002 | { |
1003 | sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET); | |
1004 | sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT); | |
1005 | sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON); | |
af4ed7e6 | 1006 | sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT); |
cd28ab6a SH |
1007 | } |
1008 | ||
cd28ab6a SH |
1009 | /* Setup prefetch unit registers. This is the interface between |
1010 | * hardware and driver list elements | |
1011 | */ | |
8cc048e3 | 1012 | static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, |
d6e74b6b | 1013 | dma_addr_t addr, u32 last) |
cd28ab6a | 1014 | { |
cd28ab6a SH |
1015 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); |
1016 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR); | |
d6e74b6b SH |
1017 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr)); |
1018 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr)); | |
cd28ab6a SH |
1019 | sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last); |
1020 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON); | |
793b883e SH |
1021 | |
1022 | sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL)); | |
cd28ab6a SH |
1023 | } |
1024 | ||
9b289c33 | 1025 | static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot) |
793b883e | 1026 | { |
9b289c33 | 1027 | struct sky2_tx_le *le = sky2->tx_le + *slot; |
793b883e | 1028 | |
ee5f68fe | 1029 | *slot = RING_NEXT(*slot, sky2->tx_ring_size); |
291ea614 | 1030 | le->ctrl = 0; |
793b883e SH |
1031 | return le; |
1032 | } | |
cd28ab6a | 1033 | |
88f5f0ca SH |
1034 | static void tx_init(struct sky2_port *sky2) |
1035 | { | |
1036 | struct sky2_tx_le *le; | |
1037 | ||
1038 | sky2->tx_prod = sky2->tx_cons = 0; | |
1039 | sky2->tx_tcpsum = 0; | |
1040 | sky2->tx_last_mss = 0; | |
1041 | ||
9b289c33 | 1042 | le = get_tx_le(sky2, &sky2->tx_prod); |
88f5f0ca SH |
1043 | le->addr = 0; |
1044 | le->opcode = OP_ADDR64 | HW_OWNER; | |
5dce95e5 | 1045 | sky2->tx_last_upper = 0; |
88f5f0ca SH |
1046 | } |
1047 | ||
290d4de5 SH |
1048 | /* Update chip's next pointer */ |
1049 | static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) | |
cd28ab6a | 1050 | { |
50432cb5 | 1051 | /* Make sure write' to descriptors are complete before we tell hardware */ |
762c2de2 | 1052 | wmb(); |
50432cb5 SH |
1053 | sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); |
1054 | ||
1055 | /* Synchronize I/O on since next processor may write to tail */ | |
1056 | mmiowb(); | |
cd28ab6a SH |
1057 | } |
1058 | ||
793b883e | 1059 | |
cd28ab6a SH |
1060 | static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) |
1061 | { | |
1062 | struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; | |
cb5d9547 | 1063 | sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE); |
291ea614 | 1064 | le->ctrl = 0; |
cd28ab6a SH |
1065 | return le; |
1066 | } | |
1067 | ||
14d0263f SH |
1068 | /* Build description to hardware for one receive segment */ |
1069 | static void sky2_rx_add(struct sky2_port *sky2, u8 op, | |
1070 | dma_addr_t map, unsigned len) | |
cd28ab6a SH |
1071 | { |
1072 | struct sky2_rx_le *le; | |
1073 | ||
86c6887e | 1074 | if (sizeof(dma_addr_t) > sizeof(u32)) { |
cd28ab6a | 1075 | le = sky2_next_rx(sky2); |
86c6887e | 1076 | le->addr = cpu_to_le32(upper_32_bits(map)); |
cd28ab6a SH |
1077 | le->opcode = OP_ADDR64 | HW_OWNER; |
1078 | } | |
793b883e | 1079 | |
cd28ab6a | 1080 | le = sky2_next_rx(sky2); |
d6e74b6b | 1081 | le->addr = cpu_to_le32(lower_32_bits(map)); |
734d1868 | 1082 | le->length = cpu_to_le16(len); |
14d0263f | 1083 | le->opcode = op | HW_OWNER; |
cd28ab6a SH |
1084 | } |
1085 | ||
14d0263f SH |
1086 | /* Build description to hardware for one possibly fragmented skb */ |
1087 | static void sky2_rx_submit(struct sky2_port *sky2, | |
1088 | const struct rx_ring_info *re) | |
1089 | { | |
1090 | int i; | |
1091 | ||
1092 | sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size); | |
1093 | ||
1094 | for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++) | |
1095 | sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE); | |
1096 | } | |
1097 | ||
1098 | ||
454e6cb6 | 1099 | static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re, |
14d0263f SH |
1100 | unsigned size) |
1101 | { | |
1102 | struct sk_buff *skb = re->skb; | |
1103 | int i; | |
1104 | ||
1105 | re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE); | |
454e6cb6 SH |
1106 | if (unlikely(pci_dma_mapping_error(pdev, re->data_addr))) |
1107 | return -EIO; | |
1108 | ||
14d0263f SH |
1109 | pci_unmap_len_set(re, data_size, size); |
1110 | ||
1111 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) | |
1112 | re->frag_addr[i] = pci_map_page(pdev, | |
1113 | skb_shinfo(skb)->frags[i].page, | |
1114 | skb_shinfo(skb)->frags[i].page_offset, | |
1115 | skb_shinfo(skb)->frags[i].size, | |
1116 | PCI_DMA_FROMDEVICE); | |
454e6cb6 | 1117 | return 0; |
14d0263f SH |
1118 | } |
1119 | ||
1120 | static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) | |
1121 | { | |
1122 | struct sk_buff *skb = re->skb; | |
1123 | int i; | |
1124 | ||
1125 | pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size), | |
1126 | PCI_DMA_FROMDEVICE); | |
1127 | ||
1128 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) | |
1129 | pci_unmap_page(pdev, re->frag_addr[i], | |
1130 | skb_shinfo(skb)->frags[i].size, | |
1131 | PCI_DMA_FROMDEVICE); | |
1132 | } | |
793b883e | 1133 | |
cd28ab6a SH |
1134 | /* Tell chip where to start receive checksum. |
1135 | * Actually has two checksums, but set both same to avoid possible byte | |
1136 | * order problems. | |
1137 | */ | |
793b883e | 1138 | static void rx_set_checksum(struct sky2_port *sky2) |
cd28ab6a | 1139 | { |
ea76e635 | 1140 | struct sky2_rx_le *le = sky2_next_rx(sky2); |
793b883e | 1141 | |
ea76e635 SH |
1142 | le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); |
1143 | le->ctrl = 0; | |
1144 | le->opcode = OP_TCPSTART | HW_OWNER; | |
cd28ab6a | 1145 | |
ea76e635 SH |
1146 | sky2_write32(sky2->hw, |
1147 | Q_ADDR(rxqaddr[sky2->port], Q_CSR), | |
0ea065e5 SH |
1148 | (sky2->flags & SKY2_FLAG_RX_CHECKSUM) |
1149 | ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); | |
cd28ab6a SH |
1150 | } |
1151 | ||
6b1a3aef | 1152 | /* |
1153 | * The RX Stop command will not work for Yukon-2 if the BMU does not | |
1154 | * reach the end of packet and since we can't make sure that we have | |
1155 | * incoming data, we must reset the BMU while it is not doing a DMA | |
1156 | * transfer. Since it is possible that the RX path is still active, | |
1157 | * the RX RAM buffer will be stopped first, so any possible incoming | |
1158 | * data will not trigger a DMA. After the RAM buffer is stopped, the | |
1159 | * BMU is polled until any DMA in progress is ended and only then it | |
1160 | * will be reset. | |
1161 | */ | |
1162 | static void sky2_rx_stop(struct sky2_port *sky2) | |
1163 | { | |
1164 | struct sky2_hw *hw = sky2->hw; | |
1165 | unsigned rxq = rxqaddr[sky2->port]; | |
1166 | int i; | |
1167 | ||
1168 | /* disable the RAM Buffer receive queue */ | |
1169 | sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD); | |
1170 | ||
1171 | for (i = 0; i < 0xffff; i++) | |
1172 | if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL)) | |
1173 | == sky2_read8(hw, RB_ADDR(rxq, Q_RL))) | |
1174 | goto stopped; | |
1175 | ||
1176 | printk(KERN_WARNING PFX "%s: receiver stop failed\n", | |
1177 | sky2->netdev->name); | |
1178 | stopped: | |
1179 | sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST); | |
1180 | ||
1181 | /* reset the Rx prefetch unit */ | |
1182 | sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); | |
3d1454dd | 1183 | mmiowb(); |
6b1a3aef | 1184 | } |
793b883e | 1185 | |
d571b694 | 1186 | /* Clean out receive buffer area, assumes receiver hardware stopped */ |
cd28ab6a SH |
1187 | static void sky2_rx_clean(struct sky2_port *sky2) |
1188 | { | |
1189 | unsigned i; | |
1190 | ||
1191 | memset(sky2->rx_le, 0, RX_LE_BYTES); | |
793b883e | 1192 | for (i = 0; i < sky2->rx_pending; i++) { |
291ea614 | 1193 | struct rx_ring_info *re = sky2->rx_ring + i; |
cd28ab6a SH |
1194 | |
1195 | if (re->skb) { | |
14d0263f | 1196 | sky2_rx_unmap_skb(sky2->hw->pdev, re); |
cd28ab6a SH |
1197 | kfree_skb(re->skb); |
1198 | re->skb = NULL; | |
1199 | } | |
1200 | } | |
1201 | } | |
1202 | ||
ef743d33 | 1203 | /* Basic MII support */ |
1204 | static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
1205 | { | |
1206 | struct mii_ioctl_data *data = if_mii(ifr); | |
1207 | struct sky2_port *sky2 = netdev_priv(dev); | |
1208 | struct sky2_hw *hw = sky2->hw; | |
1209 | int err = -EOPNOTSUPP; | |
1210 | ||
1211 | if (!netif_running(dev)) | |
1212 | return -ENODEV; /* Phy still in reset */ | |
1213 | ||
d89e1343 | 1214 | switch (cmd) { |
ef743d33 | 1215 | case SIOCGMIIPHY: |
1216 | data->phy_id = PHY_ADDR_MARV; | |
1217 | ||
1218 | /* fallthru */ | |
1219 | case SIOCGMIIREG: { | |
1220 | u16 val = 0; | |
91c86df5 | 1221 | |
e07b1aa8 | 1222 | spin_lock_bh(&sky2->phy_lock); |
ef743d33 | 1223 | err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val); |
e07b1aa8 | 1224 | spin_unlock_bh(&sky2->phy_lock); |
91c86df5 | 1225 | |
ef743d33 | 1226 | data->val_out = val; |
1227 | break; | |
1228 | } | |
1229 | ||
1230 | case SIOCSMIIREG: | |
e07b1aa8 | 1231 | spin_lock_bh(&sky2->phy_lock); |
ef743d33 | 1232 | err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f, |
1233 | data->val_in); | |
e07b1aa8 | 1234 | spin_unlock_bh(&sky2->phy_lock); |
ef743d33 | 1235 | break; |
1236 | } | |
1237 | return err; | |
1238 | } | |
1239 | ||
d1f13708 | 1240 | #ifdef SKY2_VLAN_TAG_USED |
d494eacd | 1241 | static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff) |
d1f13708 | 1242 | { |
d494eacd | 1243 | if (onoff) { |
3d4e66f5 SH |
1244 | sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), |
1245 | RX_VLAN_STRIP_ON); | |
1246 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), | |
1247 | TX_VLAN_TAG_ON); | |
1248 | } else { | |
1249 | sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), | |
1250 | RX_VLAN_STRIP_OFF); | |
1251 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), | |
1252 | TX_VLAN_TAG_OFF); | |
1253 | } | |
d494eacd SH |
1254 | } |
1255 | ||
1256 | static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | |
1257 | { | |
1258 | struct sky2_port *sky2 = netdev_priv(dev); | |
1259 | struct sky2_hw *hw = sky2->hw; | |
1260 | u16 port = sky2->port; | |
1261 | ||
1262 | netif_tx_lock_bh(dev); | |
1263 | napi_disable(&hw->napi); | |
1264 | ||
1265 | sky2->vlgrp = grp; | |
1266 | sky2_set_vlan_mode(hw, port, grp != NULL); | |
d1f13708 | 1267 | |
d1d08d12 | 1268 | sky2_read32(hw, B0_Y2_SP_LISR); |
bea3348e | 1269 | napi_enable(&hw->napi); |
2bb8c262 | 1270 | netif_tx_unlock_bh(dev); |
d1f13708 | 1271 | } |
1272 | #endif | |
1273 | ||
bd1c6869 SH |
1274 | /* Amount of required worst case padding in rx buffer */ |
1275 | static inline unsigned sky2_rx_pad(const struct sky2_hw *hw) | |
1276 | { | |
1277 | return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2; | |
1278 | } | |
1279 | ||
82788c7a | 1280 | /* |
14d0263f SH |
1281 | * Allocate an skb for receiving. If the MTU is large enough |
1282 | * make the skb non-linear with a fragment list of pages. | |
82788c7a | 1283 | */ |
14d0263f | 1284 | static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) |
82788c7a SH |
1285 | { |
1286 | struct sk_buff *skb; | |
14d0263f | 1287 | int i; |
82788c7a | 1288 | |
724b6942 SH |
1289 | skb = netdev_alloc_skb(sky2->netdev, |
1290 | sky2->rx_data_size + sky2_rx_pad(sky2->hw)); | |
bd1c6869 SH |
1291 | if (!skb) |
1292 | goto nomem; | |
1293 | ||
39dbd958 | 1294 | if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) { |
f03b8654 SH |
1295 | unsigned char *start; |
1296 | /* | |
1297 | * Workaround for a bug in FIFO that cause hang | |
1298 | * if the FIFO if the receive buffer is not 64 byte aligned. | |
1299 | * The buffer returned from netdev_alloc_skb is | |
1300 | * aligned except if slab debugging is enabled. | |
1301 | */ | |
f03b8654 SH |
1302 | start = PTR_ALIGN(skb->data, 8); |
1303 | skb_reserve(skb, start - skb->data); | |
bd1c6869 | 1304 | } else |
f03b8654 | 1305 | skb_reserve(skb, NET_IP_ALIGN); |
14d0263f SH |
1306 | |
1307 | for (i = 0; i < sky2->rx_nfrags; i++) { | |
1308 | struct page *page = alloc_page(GFP_ATOMIC); | |
1309 | ||
1310 | if (!page) | |
1311 | goto free_partial; | |
1312 | skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); | |
82788c7a SH |
1313 | } |
1314 | ||
1315 | return skb; | |
14d0263f SH |
1316 | free_partial: |
1317 | kfree_skb(skb); | |
1318 | nomem: | |
1319 | return NULL; | |
82788c7a SH |
1320 | } |
1321 | ||
55c9dd35 SH |
1322 | static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq) |
1323 | { | |
1324 | sky2_put_idx(sky2->hw, rxq, sky2->rx_put); | |
1325 | } | |
1326 | ||
cd28ab6a SH |
1327 | /* |
1328 | * Allocate and setup receiver buffer pool. | |
14d0263f SH |
1329 | * Normal case this ends up creating one list element for skb |
1330 | * in the receive ring. Worst case if using large MTU and each | |
1331 | * allocation falls on a different 64 bit region, that results | |
1332 | * in 6 list elements per ring entry. | |
1333 | * One element is used for checksum enable/disable, and one | |
1334 | * extra to avoid wrap. | |
cd28ab6a | 1335 | */ |
6b1a3aef | 1336 | static int sky2_rx_start(struct sky2_port *sky2) |
cd28ab6a | 1337 | { |
6b1a3aef | 1338 | struct sky2_hw *hw = sky2->hw; |
14d0263f | 1339 | struct rx_ring_info *re; |
6b1a3aef | 1340 | unsigned rxq = rxqaddr[sky2->port]; |
5f06eba4 | 1341 | unsigned i, size, thresh; |
cd28ab6a | 1342 | |
6b1a3aef | 1343 | sky2->rx_put = sky2->rx_next = 0; |
af4ed7e6 | 1344 | sky2_qset(hw, rxq); |
977bdf06 | 1345 | |
c3905bc4 SH |
1346 | /* On PCI express lowering the watermark gives better performance */ |
1347 | if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) | |
1348 | sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX); | |
1349 | ||
1350 | /* These chips have no ram buffer? | |
1351 | * MAC Rx RAM Read is controlled by hardware */ | |
8df9a876 | 1352 | if (hw->chip_id == CHIP_ID_YUKON_EC_U && |
8e95a202 JP |
1353 | (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || |
1354 | hw->chip_rev == CHIP_REV_YU_EC_U_B0)) | |
f449c7c1 | 1355 | sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS); |
977bdf06 | 1356 | |
6b1a3aef | 1357 | sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); |
1358 | ||
ea76e635 SH |
1359 | if (!(hw->flags & SKY2_HW_NEW_LE)) |
1360 | rx_set_checksum(sky2); | |
14d0263f SH |
1361 | |
1362 | /* Space needed for frame data + headers rounded up */ | |
f957da2a | 1363 | size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8); |
14d0263f SH |
1364 | |
1365 | /* Stopping point for hardware truncation */ | |
1366 | thresh = (size - 8) / sizeof(u32); | |
1367 | ||
5f06eba4 | 1368 | sky2->rx_nfrags = size >> PAGE_SHIFT; |
14d0263f SH |
1369 | BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr)); |
1370 | ||
5f06eba4 SH |
1371 | /* Compute residue after pages */ |
1372 | size -= sky2->rx_nfrags << PAGE_SHIFT; | |
14d0263f | 1373 | |
5f06eba4 SH |
1374 | /* Optimize to handle small packets and headers */ |
1375 | if (size < copybreak) | |
1376 | size = copybreak; | |
1377 | if (size < ETH_HLEN) | |
1378 | size = ETH_HLEN; | |
14d0263f | 1379 | |
14d0263f SH |
1380 | sky2->rx_data_size = size; |
1381 | ||
1382 | /* Fill Rx ring */ | |
793b883e | 1383 | for (i = 0; i < sky2->rx_pending; i++) { |
14d0263f | 1384 | re = sky2->rx_ring + i; |
cd28ab6a | 1385 | |
14d0263f | 1386 | re->skb = sky2_rx_alloc(sky2); |
cd28ab6a SH |
1387 | if (!re->skb) |
1388 | goto nomem; | |
1389 | ||
454e6cb6 SH |
1390 | if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) { |
1391 | dev_kfree_skb(re->skb); | |
1392 | re->skb = NULL; | |
1393 | goto nomem; | |
1394 | } | |
1395 | ||
14d0263f | 1396 | sky2_rx_submit(sky2, re); |
cd28ab6a SH |
1397 | } |
1398 | ||
a1433ac4 SH |
1399 | /* |
1400 | * The receiver hangs if it receives frames larger than the | |
1401 | * packet buffer. As a workaround, truncate oversize frames, but | |
1402 | * the register is limited to 9 bits, so if you do frames > 2052 | |
1403 | * you better get the MTU right! | |
1404 | */ | |
a1433ac4 SH |
1405 | if (thresh > 0x1ff) |
1406 | sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF); | |
1407 | else { | |
1408 | sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh); | |
1409 | sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON); | |
1410 | } | |
1411 | ||
6b1a3aef | 1412 | /* Tell chip about available buffers */ |
55c9dd35 | 1413 | sky2_rx_update(sky2, rxq); |
877c8570 SH |
1414 | |
1415 | if (hw->chip_id == CHIP_ID_YUKON_EX || | |
1416 | hw->chip_id == CHIP_ID_YUKON_SUPR) { | |
1417 | /* | |
1418 | * Disable flushing of non ASF packets; | |
1419 | * must be done after initializing the BMUs; | |
1420 | * drivers without ASF support should do this too, otherwise | |
1421 | * it may happen that they cannot run on ASF devices; | |
1422 | * remember that the MAC FIFO isn't reset during initialization. | |
1423 | */ | |
1424 | sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF); | |
1425 | } | |
1426 | ||
1427 | if (hw->chip_id >= CHIP_ID_YUKON_SUPR) { | |
1428 | /* Enable RX Home Address & Routing Header checksum fix */ | |
1429 | sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL), | |
1430 | RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA); | |
1431 | ||
1432 | /* Enable TX Home Address & Routing Header checksum fix */ | |
1433 | sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST), | |
1434 | TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN); | |
1435 | } | |
1436 | ||
1437 | ||
1438 | ||
cd28ab6a SH |
1439 | return 0; |
1440 | nomem: | |
1441 | sky2_rx_clean(sky2); | |
1442 | return -ENOMEM; | |
1443 | } | |
1444 | ||
90bbebb4 MM |
1445 | static int sky2_alloc_buffers(struct sky2_port *sky2) |
1446 | { | |
1447 | struct sky2_hw *hw = sky2->hw; | |
1448 | ||
1449 | /* must be power of 2 */ | |
1450 | sky2->tx_le = pci_alloc_consistent(hw->pdev, | |
1451 | sky2->tx_ring_size * | |
1452 | sizeof(struct sky2_tx_le), | |
1453 | &sky2->tx_le_map); | |
1454 | if (!sky2->tx_le) | |
1455 | goto nomem; | |
1456 | ||
1457 | sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info), | |
1458 | GFP_KERNEL); | |
1459 | if (!sky2->tx_ring) | |
1460 | goto nomem; | |
1461 | ||
1462 | sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES, | |
1463 | &sky2->rx_le_map); | |
1464 | if (!sky2->rx_le) | |
1465 | goto nomem; | |
1466 | memset(sky2->rx_le, 0, RX_LE_BYTES); | |
1467 | ||
1468 | sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info), | |
1469 | GFP_KERNEL); | |
1470 | if (!sky2->rx_ring) | |
1471 | goto nomem; | |
1472 | ||
1473 | return 0; | |
1474 | nomem: | |
1475 | return -ENOMEM; | |
1476 | } | |
1477 | ||
1478 | static void sky2_free_buffers(struct sky2_port *sky2) | |
1479 | { | |
1480 | struct sky2_hw *hw = sky2->hw; | |
1481 | ||
1482 | if (sky2->rx_le) { | |
1483 | pci_free_consistent(hw->pdev, RX_LE_BYTES, | |
1484 | sky2->rx_le, sky2->rx_le_map); | |
1485 | sky2->rx_le = NULL; | |
1486 | } | |
1487 | if (sky2->tx_le) { | |
1488 | pci_free_consistent(hw->pdev, | |
1489 | sky2->tx_ring_size * sizeof(struct sky2_tx_le), | |
1490 | sky2->tx_le, sky2->tx_le_map); | |
1491 | sky2->tx_le = NULL; | |
1492 | } | |
1493 | kfree(sky2->tx_ring); | |
1494 | kfree(sky2->rx_ring); | |
1495 | ||
1496 | sky2->tx_ring = NULL; | |
1497 | sky2->rx_ring = NULL; | |
1498 | } | |
1499 | ||
cd28ab6a SH |
1500 | /* Bring up network interface. */ |
1501 | static int sky2_up(struct net_device *dev) | |
1502 | { | |
1503 | struct sky2_port *sky2 = netdev_priv(dev); | |
1504 | struct sky2_hw *hw = sky2->hw; | |
1505 | unsigned port = sky2->port; | |
e0c28116 | 1506 | u32 imask, ramsize; |
90bbebb4 | 1507 | int cap, err; |
843a46f4 | 1508 | struct net_device *otherdev = hw->dev[sky2->port^1]; |
cd28ab6a | 1509 | |
ee7abb04 SH |
1510 | /* |
1511 | * On dual port PCI-X card, there is an problem where status | |
1512 | * can be received out of order due to split transactions | |
843a46f4 | 1513 | */ |
ee7abb04 SH |
1514 | if (otherdev && netif_running(otherdev) && |
1515 | (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) { | |
ee7abb04 SH |
1516 | u16 cmd; |
1517 | ||
b32f40c4 | 1518 | cmd = sky2_pci_read16(hw, cap + PCI_X_CMD); |
ee7abb04 | 1519 | cmd &= ~PCI_X_CMD_MAX_SPLIT; |
b32f40c4 SH |
1520 | sky2_pci_write16(hw, cap + PCI_X_CMD, cmd); |
1521 | ||
ee7abb04 | 1522 | } |
843a46f4 | 1523 | |
55d7b4e6 SH |
1524 | netif_carrier_off(dev); |
1525 | ||
90bbebb4 MM |
1526 | err = sky2_alloc_buffers(sky2); |
1527 | if (err) | |
cd28ab6a | 1528 | goto err_out; |
88f5f0ca SH |
1529 | |
1530 | tx_init(sky2); | |
cd28ab6a | 1531 | |
cd28ab6a SH |
1532 | sky2_mac_init(hw, port); |
1533 | ||
e0c28116 SH |
1534 | /* Register is number of 4K blocks on internal RAM buffer. */ |
1535 | ramsize = sky2_read8(hw, B2_E_0) * 4; | |
1536 | if (ramsize > 0) { | |
67712901 | 1537 | u32 rxspace; |
cd28ab6a | 1538 | |
e0c28116 | 1539 | pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize); |
67712901 SH |
1540 | if (ramsize < 16) |
1541 | rxspace = ramsize / 2; | |
1542 | else | |
1543 | rxspace = 8 + (2*(ramsize - 16))/3; | |
cd28ab6a | 1544 | |
67712901 SH |
1545 | sky2_ramset(hw, rxqaddr[port], 0, rxspace); |
1546 | sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace); | |
1547 | ||
1548 | /* Make sure SyncQ is disabled */ | |
1549 | sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), | |
1550 | RB_RST_SET); | |
1551 | } | |
793b883e | 1552 | |
af4ed7e6 | 1553 | sky2_qset(hw, txqaddr[port]); |
5a5b1ea0 | 1554 | |
69161611 SH |
1555 | /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */ |
1556 | if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0) | |
1557 | sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF); | |
1558 | ||
977bdf06 | 1559 | /* Set almost empty threshold */ |
8e95a202 JP |
1560 | if (hw->chip_id == CHIP_ID_YUKON_EC_U && |
1561 | hw->chip_rev == CHIP_REV_YU_EC_U_A0) | |
b628ed98 | 1562 | sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV); |
5a5b1ea0 | 1563 | |
6b1a3aef | 1564 | sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, |
ee5f68fe | 1565 | sky2->tx_ring_size - 1); |
cd28ab6a | 1566 | |
d494eacd SH |
1567 | #ifdef SKY2_VLAN_TAG_USED |
1568 | sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL); | |
1569 | #endif | |
1570 | ||
6b1a3aef | 1571 | err = sky2_rx_start(sky2); |
6de16237 | 1572 | if (err) |
cd28ab6a SH |
1573 | goto err_out; |
1574 | ||
cd28ab6a | 1575 | /* Enable interrupts from phy/mac for port */ |
e07b1aa8 | 1576 | imask = sky2_read32(hw, B0_IMSK); |
f4ea431b | 1577 | imask |= portirq_msk[port]; |
e07b1aa8 | 1578 | sky2_write32(hw, B0_IMSK, imask); |
1fd82f3c | 1579 | sky2_read32(hw, B0_IMSK); |
e07b1aa8 | 1580 | |
a11da890 AD |
1581 | if (netif_msg_ifup(sky2)) |
1582 | printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); | |
af18d8b8 | 1583 | |
cd28ab6a SH |
1584 | return 0; |
1585 | ||
1586 | err_out: | |
90bbebb4 | 1587 | sky2_free_buffers(sky2); |
cd28ab6a SH |
1588 | return err; |
1589 | } | |
1590 | ||
793b883e | 1591 | /* Modular subtraction in ring */ |
ee5f68fe | 1592 | static inline int tx_inuse(const struct sky2_port *sky2) |
793b883e | 1593 | { |
ee5f68fe | 1594 | return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1); |
793b883e | 1595 | } |
cd28ab6a | 1596 | |
793b883e SH |
1597 | /* Number of list elements available for next tx */ |
1598 | static inline int tx_avail(const struct sky2_port *sky2) | |
cd28ab6a | 1599 | { |
ee5f68fe | 1600 | return sky2->tx_pending - tx_inuse(sky2); |
cd28ab6a SH |
1601 | } |
1602 | ||
793b883e | 1603 | /* Estimate of number of transmit list elements required */ |
28bd181a | 1604 | static unsigned tx_le_req(const struct sk_buff *skb) |
cd28ab6a | 1605 | { |
793b883e SH |
1606 | unsigned count; |
1607 | ||
07e31637 SH |
1608 | count = (skb_shinfo(skb)->nr_frags + 1) |
1609 | * (sizeof(dma_addr_t) / sizeof(u32)); | |
793b883e | 1610 | |
89114afd | 1611 | if (skb_is_gso(skb)) |
793b883e | 1612 | ++count; |
07e31637 SH |
1613 | else if (sizeof(dma_addr_t) == sizeof(u32)) |
1614 | ++count; /* possible vlan */ | |
793b883e | 1615 | |
84fa7933 | 1616 | if (skb->ip_summed == CHECKSUM_PARTIAL) |
793b883e SH |
1617 | ++count; |
1618 | ||
1619 | return count; | |
cd28ab6a SH |
1620 | } |
1621 | ||
f6815077 | 1622 | static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re) |
6b84daca SH |
1623 | { |
1624 | if (re->flags & TX_MAP_SINGLE) | |
1625 | pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr), | |
1626 | pci_unmap_len(re, maplen), | |
1627 | PCI_DMA_TODEVICE); | |
1628 | else if (re->flags & TX_MAP_PAGE) | |
1629 | pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), | |
1630 | pci_unmap_len(re, maplen), | |
1631 | PCI_DMA_TODEVICE); | |
f6815077 | 1632 | re->flags = 0; |
6b84daca SH |
1633 | } |
1634 | ||
793b883e SH |
1635 | /* |
1636 | * Put one packet in ring for transmit. | |
1637 | * A single packet can generate multiple list elements, and | |
1638 | * the number of ring elements will probably be less than the number | |
1639 | * of list elements used. | |
1640 | */ | |
61357325 SH |
1641 | static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb, |
1642 | struct net_device *dev) | |
cd28ab6a SH |
1643 | { |
1644 | struct sky2_port *sky2 = netdev_priv(dev); | |
1645 | struct sky2_hw *hw = sky2->hw; | |
d1f13708 | 1646 | struct sky2_tx_le *le = NULL; |
6cdbbdf3 | 1647 | struct tx_ring_info *re; |
9b289c33 | 1648 | unsigned i, len; |
cd28ab6a | 1649 | dma_addr_t mapping; |
5dce95e5 SH |
1650 | u32 upper; |
1651 | u16 slot; | |
cd28ab6a SH |
1652 | u16 mss; |
1653 | u8 ctrl; | |
1654 | ||
2bb8c262 SH |
1655 | if (unlikely(tx_avail(sky2) < tx_le_req(skb))) |
1656 | return NETDEV_TX_BUSY; | |
cd28ab6a | 1657 | |
cd28ab6a SH |
1658 | len = skb_headlen(skb); |
1659 | mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); | |
793b883e | 1660 | |
454e6cb6 SH |
1661 | if (pci_dma_mapping_error(hw->pdev, mapping)) |
1662 | goto mapping_error; | |
1663 | ||
9b289c33 | 1664 | slot = sky2->tx_prod; |
454e6cb6 SH |
1665 | if (unlikely(netif_msg_tx_queued(sky2))) |
1666 | printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n", | |
9b289c33 | 1667 | dev->name, slot, skb->len); |
454e6cb6 | 1668 | |
86c6887e | 1669 | /* Send high bits if needed */ |
5dce95e5 SH |
1670 | upper = upper_32_bits(mapping); |
1671 | if (upper != sky2->tx_last_upper) { | |
9b289c33 | 1672 | le = get_tx_le(sky2, &slot); |
5dce95e5 SH |
1673 | le->addr = cpu_to_le32(upper); |
1674 | sky2->tx_last_upper = upper; | |
793b883e | 1675 | le->opcode = OP_ADDR64 | HW_OWNER; |
793b883e | 1676 | } |
cd28ab6a SH |
1677 | |
1678 | /* Check for TCP Segmentation Offload */ | |
7967168c | 1679 | mss = skb_shinfo(skb)->gso_size; |
793b883e | 1680 | if (mss != 0) { |
ea76e635 SH |
1681 | |
1682 | if (!(hw->flags & SKY2_HW_NEW_LE)) | |
69161611 SH |
1683 | mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb); |
1684 | ||
1685 | if (mss != sky2->tx_last_mss) { | |
9b289c33 | 1686 | le = get_tx_le(sky2, &slot); |
69161611 | 1687 | le->addr = cpu_to_le32(mss); |
ea76e635 SH |
1688 | |
1689 | if (hw->flags & SKY2_HW_NEW_LE) | |
69161611 SH |
1690 | le->opcode = OP_MSS | HW_OWNER; |
1691 | else | |
1692 | le->opcode = OP_LRGLEN | HW_OWNER; | |
e07560cd | 1693 | sky2->tx_last_mss = mss; |
1694 | } | |
cd28ab6a SH |
1695 | } |
1696 | ||
cd28ab6a | 1697 | ctrl = 0; |
d1f13708 | 1698 | #ifdef SKY2_VLAN_TAG_USED |
1699 | /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */ | |
1700 | if (sky2->vlgrp && vlan_tx_tag_present(skb)) { | |
1701 | if (!le) { | |
9b289c33 | 1702 | le = get_tx_le(sky2, &slot); |
f65b138c | 1703 | le->addr = 0; |
d1f13708 | 1704 | le->opcode = OP_VLAN|HW_OWNER; |
d1f13708 | 1705 | } else |
1706 | le->opcode |= OP_VLAN; | |
1707 | le->length = cpu_to_be16(vlan_tx_tag_get(skb)); | |
1708 | ctrl |= INS_VLAN; | |
1709 | } | |
1710 | #endif | |
1711 | ||
1712 | /* Handle TCP checksum offload */ | |
84fa7933 | 1713 | if (skb->ip_summed == CHECKSUM_PARTIAL) { |
69161611 | 1714 | /* On Yukon EX (some versions) encoding change. */ |
ea76e635 | 1715 | if (hw->flags & SKY2_HW_AUTO_TX_SUM) |
69161611 SH |
1716 | ctrl |= CALSUM; /* auto checksum */ |
1717 | else { | |
1718 | const unsigned offset = skb_transport_offset(skb); | |
1719 | u32 tcpsum; | |
1720 | ||
1721 | tcpsum = offset << 16; /* sum start */ | |
1722 | tcpsum |= offset + skb->csum_offset; /* sum write */ | |
1723 | ||
1724 | ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; | |
1725 | if (ip_hdr(skb)->protocol == IPPROTO_UDP) | |
1726 | ctrl |= UDPTCP; | |
1727 | ||
1728 | if (tcpsum != sky2->tx_tcpsum) { | |
1729 | sky2->tx_tcpsum = tcpsum; | |
1730 | ||
9b289c33 | 1731 | le = get_tx_le(sky2, &slot); |
69161611 SH |
1732 | le->addr = cpu_to_le32(tcpsum); |
1733 | le->length = 0; /* initial checksum value */ | |
1734 | le->ctrl = 1; /* one packet */ | |
1735 | le->opcode = OP_TCPLISW | HW_OWNER; | |
1736 | } | |
1d179332 | 1737 | } |
cd28ab6a SH |
1738 | } |
1739 | ||
6b84daca SH |
1740 | re = sky2->tx_ring + slot; |
1741 | re->flags = TX_MAP_SINGLE; | |
1742 | pci_unmap_addr_set(re, mapaddr, mapping); | |
1743 | pci_unmap_len_set(re, maplen, len); | |
1744 | ||
9b289c33 | 1745 | le = get_tx_le(sky2, &slot); |
d6e74b6b | 1746 | le->addr = cpu_to_le32(lower_32_bits(mapping)); |
cd28ab6a SH |
1747 | le->length = cpu_to_le16(len); |
1748 | le->ctrl = ctrl; | |
793b883e | 1749 | le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); |
cd28ab6a | 1750 | |
cd28ab6a SH |
1751 | |
1752 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
291ea614 | 1753 | const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; |
cd28ab6a SH |
1754 | |
1755 | mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, | |
1756 | frag->size, PCI_DMA_TODEVICE); | |
86c6887e | 1757 | |
454e6cb6 SH |
1758 | if (pci_dma_mapping_error(hw->pdev, mapping)) |
1759 | goto mapping_unwind; | |
1760 | ||
5dce95e5 SH |
1761 | upper = upper_32_bits(mapping); |
1762 | if (upper != sky2->tx_last_upper) { | |
9b289c33 | 1763 | le = get_tx_le(sky2, &slot); |
5dce95e5 SH |
1764 | le->addr = cpu_to_le32(upper); |
1765 | sky2->tx_last_upper = upper; | |
793b883e | 1766 | le->opcode = OP_ADDR64 | HW_OWNER; |
cd28ab6a SH |
1767 | } |
1768 | ||
6b84daca SH |
1769 | re = sky2->tx_ring + slot; |
1770 | re->flags = TX_MAP_PAGE; | |
1771 | pci_unmap_addr_set(re, mapaddr, mapping); | |
1772 | pci_unmap_len_set(re, maplen, frag->size); | |
1773 | ||
9b289c33 | 1774 | le = get_tx_le(sky2, &slot); |
d6e74b6b | 1775 | le->addr = cpu_to_le32(lower_32_bits(mapping)); |
cd28ab6a SH |
1776 | le->length = cpu_to_le16(frag->size); |
1777 | le->ctrl = ctrl; | |
793b883e | 1778 | le->opcode = OP_BUFFER | HW_OWNER; |
cd28ab6a | 1779 | } |
6cdbbdf3 | 1780 | |
6b84daca | 1781 | re->skb = skb; |
cd28ab6a SH |
1782 | le->ctrl |= EOP; |
1783 | ||
9b289c33 MM |
1784 | sky2->tx_prod = slot; |
1785 | ||
97bda706 | 1786 | if (tx_avail(sky2) <= MAX_SKB_TX_LE) |
1787 | netif_stop_queue(dev); | |
b19666d9 | 1788 | |
290d4de5 | 1789 | sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod); |
cd28ab6a | 1790 | |
cd28ab6a | 1791 | return NETDEV_TX_OK; |
454e6cb6 SH |
1792 | |
1793 | mapping_unwind: | |
ee5f68fe | 1794 | for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) { |
454e6cb6 SH |
1795 | re = sky2->tx_ring + i; |
1796 | ||
6b84daca | 1797 | sky2_tx_unmap(hw->pdev, re); |
454e6cb6 SH |
1798 | } |
1799 | ||
454e6cb6 SH |
1800 | mapping_error: |
1801 | if (net_ratelimit()) | |
1802 | dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name); | |
1803 | dev_kfree_skb(skb); | |
1804 | return NETDEV_TX_OK; | |
cd28ab6a SH |
1805 | } |
1806 | ||
cd28ab6a | 1807 | /* |
793b883e SH |
1808 | * Free ring elements from starting at tx_cons until "done" |
1809 | * | |
481cea4a SH |
1810 | * NB: |
1811 | * 1. The hardware will tell us about partial completion of multi-part | |
291ea614 | 1812 | * buffers so make sure not to free skb to early. |
481cea4a SH |
1813 | * 2. This may run in parallel start_xmit because the it only |
1814 | * looks at the tail of the queue of FIFO (tx_cons), not | |
1815 | * the head (tx_prod) | |
cd28ab6a | 1816 | */ |
d11c13e7 | 1817 | static void sky2_tx_complete(struct sky2_port *sky2, u16 done) |
cd28ab6a | 1818 | { |
d11c13e7 | 1819 | struct net_device *dev = sky2->netdev; |
291ea614 | 1820 | unsigned idx; |
cd28ab6a | 1821 | |
ee5f68fe | 1822 | BUG_ON(done >= sky2->tx_ring_size); |
2224795d | 1823 | |
291ea614 | 1824 | for (idx = sky2->tx_cons; idx != done; |
ee5f68fe | 1825 | idx = RING_NEXT(idx, sky2->tx_ring_size)) { |
291ea614 | 1826 | struct tx_ring_info *re = sky2->tx_ring + idx; |
6b84daca | 1827 | struct sk_buff *skb = re->skb; |
291ea614 | 1828 | |
6b84daca | 1829 | sky2_tx_unmap(sky2->hw->pdev, re); |
bd1c6869 | 1830 | |
6b84daca | 1831 | if (skb) { |
291ea614 SH |
1832 | if (unlikely(netif_msg_tx_done(sky2))) |
1833 | printk(KERN_DEBUG "%s: tx done %u\n", | |
1834 | dev->name, idx); | |
3cf26753 | 1835 | |
7138a0f5 | 1836 | dev->stats.tx_packets++; |
bd1c6869 SH |
1837 | dev->stats.tx_bytes += skb->len; |
1838 | ||
f6815077 | 1839 | re->skb = NULL; |
724b6942 | 1840 | dev_kfree_skb_any(skb); |
2bf56fe2 | 1841 | |
ee5f68fe | 1842 | sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size); |
cd28ab6a | 1843 | } |
793b883e | 1844 | } |
793b883e | 1845 | |
291ea614 | 1846 | sky2->tx_cons = idx; |
50432cb5 SH |
1847 | smp_mb(); |
1848 | ||
9db2f1be JP |
1849 | /* Wake unless it's detached, and called e.g. from sky2_down() */ |
1850 | if (tx_avail(sky2) > MAX_SKB_TX_LE + 4 && netif_device_present(dev)) | |
cd28ab6a | 1851 | netif_wake_queue(dev); |
cd28ab6a SH |
1852 | } |
1853 | ||
264bb4fa | 1854 | static void sky2_tx_reset(struct sky2_hw *hw, unsigned port) |
a510996b | 1855 | { |
a510996b MM |
1856 | /* Disable Force Sync bit and Enable Alloc bit */ |
1857 | sky2_write8(hw, SK_REG(port, TXA_CTRL), | |
1858 | TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); | |
1859 | ||
1860 | /* Stop Interval Timer and Limit Counter of Tx Arbiter */ | |
1861 | sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L); | |
1862 | sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L); | |
1863 | ||
1864 | /* Reset the PCI FIFO of the async Tx queue */ | |
1865 | sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), | |
1866 | BMU_RST_SET | BMU_FIFO_RST); | |
1867 | ||
1868 | /* Reset the Tx prefetch units */ | |
1869 | sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL), | |
1870 | PREF_UNIT_RST_SET); | |
1871 | ||
1872 | sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); | |
1873 | sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); | |
1874 | } | |
1875 | ||
cd28ab6a SH |
1876 | /* Network shutdown */ |
1877 | static int sky2_down(struct net_device *dev) | |
1878 | { | |
1879 | struct sky2_port *sky2 = netdev_priv(dev); | |
1880 | struct sky2_hw *hw = sky2->hw; | |
1881 | unsigned port = sky2->port; | |
1882 | u16 ctrl; | |
e07b1aa8 | 1883 | u32 imask; |
cd28ab6a | 1884 | |
1b537565 SH |
1885 | /* Never really got started! */ |
1886 | if (!sky2->tx_le) | |
1887 | return 0; | |
1888 | ||
cd28ab6a SH |
1889 | if (netif_msg_ifdown(sky2)) |
1890 | printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); | |
1891 | ||
d104acaf SH |
1892 | /* Force flow control off */ |
1893 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); | |
793b883e | 1894 | |
cd28ab6a SH |
1895 | /* Stop transmitter */ |
1896 | sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); | |
1897 | sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR)); | |
1898 | ||
1899 | sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), | |
793b883e | 1900 | RB_RST_SET | RB_DIS_OP_MD); |
cd28ab6a SH |
1901 | |
1902 | ctrl = gma_read16(hw, port, GM_GP_CTRL); | |
793b883e | 1903 | ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); |
cd28ab6a SH |
1904 | gma_write16(hw, port, GM_GP_CTRL, ctrl); |
1905 | ||
1906 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); | |
1907 | ||
1908 | /* Workaround shared GMAC reset */ | |
8e95a202 JP |
1909 | if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && |
1910 | port == 0 && hw->dev[1] && netif_running(hw->dev[1]))) | |
cd28ab6a SH |
1911 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); |
1912 | ||
cd28ab6a | 1913 | sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); |
cd28ab6a | 1914 | |
6c83504f SH |
1915 | /* Force any delayed status interrrupt and NAPI */ |
1916 | sky2_write32(hw, STAT_LEV_TIMER_CNT, 0); | |
1917 | sky2_write32(hw, STAT_TX_TIMER_CNT, 0); | |
1918 | sky2_write32(hw, STAT_ISR_TIMER_CNT, 0); | |
1919 | sky2_read8(hw, STAT_ISR_TIMER_CTRL); | |
1920 | ||
a947a39d MM |
1921 | sky2_rx_stop(sky2); |
1922 | ||
1923 | /* Disable port IRQ */ | |
1924 | imask = sky2_read32(hw, B0_IMSK); | |
1925 | imask &= ~portirq_msk[port]; | |
1926 | sky2_write32(hw, B0_IMSK, imask); | |
1927 | sky2_read32(hw, B0_IMSK); | |
1928 | ||
6c83504f SH |
1929 | synchronize_irq(hw->pdev->irq); |
1930 | napi_synchronize(&hw->napi); | |
1931 | ||
0da6d7b3 | 1932 | spin_lock_bh(&sky2->phy_lock); |
b96936da | 1933 | sky2_phy_power_down(hw, port); |
0da6d7b3 | 1934 | spin_unlock_bh(&sky2->phy_lock); |
d3bcfbeb | 1935 | |
264bb4fa MM |
1936 | sky2_tx_reset(hw, port); |
1937 | ||
481cea4a SH |
1938 | /* Free any pending frames stuck in HW queue */ |
1939 | sky2_tx_complete(sky2, sky2->tx_prod); | |
1940 | ||
cd28ab6a SH |
1941 | sky2_rx_clean(sky2); |
1942 | ||
90bbebb4 | 1943 | sky2_free_buffers(sky2); |
1b537565 | 1944 | |
cd28ab6a SH |
1945 | return 0; |
1946 | } | |
1947 | ||
1948 | static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) | |
1949 | { | |
ea76e635 | 1950 | if (hw->flags & SKY2_HW_FIBRE_PHY) |
793b883e SH |
1951 | return SPEED_1000; |
1952 | ||
05745c4a SH |
1953 | if (!(hw->flags & SKY2_HW_GIGABIT)) { |
1954 | if (aux & PHY_M_PS_SPEED_100) | |
1955 | return SPEED_100; | |
1956 | else | |
1957 | return SPEED_10; | |
1958 | } | |
cd28ab6a SH |
1959 | |
1960 | switch (aux & PHY_M_PS_SPEED_MSK) { | |
1961 | case PHY_M_PS_SPEED_1000: | |
1962 | return SPEED_1000; | |
1963 | case PHY_M_PS_SPEED_100: | |
1964 | return SPEED_100; | |
1965 | default: | |
1966 | return SPEED_10; | |
1967 | } | |
1968 | } | |
1969 | ||
1970 | static void sky2_link_up(struct sky2_port *sky2) | |
1971 | { | |
1972 | struct sky2_hw *hw = sky2->hw; | |
1973 | unsigned port = sky2->port; | |
1974 | u16 reg; | |
16ad91e1 SH |
1975 | static const char *fc_name[] = { |
1976 | [FC_NONE] = "none", | |
1977 | [FC_TX] = "tx", | |
1978 | [FC_RX] = "rx", | |
1979 | [FC_BOTH] = "both", | |
1980 | }; | |
cd28ab6a | 1981 | |
cd28ab6a | 1982 | /* enable Rx/Tx */ |
2eaba1a2 | 1983 | reg = gma_read16(hw, port, GM_GP_CTRL); |
cd28ab6a SH |
1984 | reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; |
1985 | gma_write16(hw, port, GM_GP_CTRL, reg); | |
cd28ab6a SH |
1986 | |
1987 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); | |
1988 | ||
1989 | netif_carrier_on(sky2->netdev); | |
cd28ab6a | 1990 | |
75e80683 | 1991 | mod_timer(&hw->watchdog_timer, jiffies + 1); |
32c2c300 | 1992 | |
cd28ab6a | 1993 | /* Turn on link LED */ |
793b883e | 1994 | sky2_write8(hw, SK_REG(port, LNK_LED_REG), |
cd28ab6a SH |
1995 | LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); |
1996 | ||
1997 | if (netif_msg_link(sky2)) | |
1998 | printk(KERN_INFO PFX | |
d571b694 | 1999 | "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", |
cd28ab6a SH |
2000 | sky2->netdev->name, sky2->speed, |
2001 | sky2->duplex == DUPLEX_FULL ? "full" : "half", | |
16ad91e1 | 2002 | fc_name[sky2->flow_status]); |
cd28ab6a SH |
2003 | } |
2004 | ||
2005 | static void sky2_link_down(struct sky2_port *sky2) | |
2006 | { | |
2007 | struct sky2_hw *hw = sky2->hw; | |
2008 | unsigned port = sky2->port; | |
2009 | u16 reg; | |
2010 | ||
2011 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); | |
2012 | ||
2013 | reg = gma_read16(hw, port, GM_GP_CTRL); | |
2014 | reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); | |
2015 | gma_write16(hw, port, GM_GP_CTRL, reg); | |
cd28ab6a | 2016 | |
cd28ab6a | 2017 | netif_carrier_off(sky2->netdev); |
cd28ab6a | 2018 | |
809aaaae | 2019 | /* Turn off link LED */ |
cd28ab6a SH |
2020 | sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); |
2021 | ||
2022 | if (netif_msg_link(sky2)) | |
2023 | printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name); | |
2eaba1a2 | 2024 | |
cd28ab6a SH |
2025 | sky2_phy_init(hw, port); |
2026 | } | |
2027 | ||
16ad91e1 SH |
2028 | static enum flow_control sky2_flow(int rx, int tx) |
2029 | { | |
2030 | if (rx) | |
2031 | return tx ? FC_BOTH : FC_RX; | |
2032 | else | |
2033 | return tx ? FC_TX : FC_NONE; | |
2034 | } | |
2035 | ||
793b883e SH |
2036 | static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) |
2037 | { | |
2038 | struct sky2_hw *hw = sky2->hw; | |
2039 | unsigned port = sky2->port; | |
da4c1ff4 | 2040 | u16 advert, lpa; |
793b883e | 2041 | |
da4c1ff4 | 2042 | advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV); |
793b883e | 2043 | lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP); |
793b883e SH |
2044 | if (lpa & PHY_M_AN_RF) { |
2045 | printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name); | |
2046 | return -1; | |
2047 | } | |
2048 | ||
793b883e SH |
2049 | if (!(aux & PHY_M_PS_SPDUP_RES)) { |
2050 | printk(KERN_ERR PFX "%s: speed/duplex mismatch", | |
2051 | sky2->netdev->name); | |
2052 | return -1; | |
2053 | } | |
2054 | ||
793b883e | 2055 | sky2->speed = sky2_phy_speed(hw, aux); |
7c74ac1c | 2056 | sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; |
793b883e | 2057 | |
da4c1ff4 SH |
2058 | /* Since the pause result bits seem to in different positions on |
2059 | * different chips. look at registers. | |
2060 | */ | |
ea76e635 | 2061 | if (hw->flags & SKY2_HW_FIBRE_PHY) { |
da4c1ff4 SH |
2062 | /* Shift for bits in fiber PHY */ |
2063 | advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM); | |
2064 | lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM); | |
2065 | ||
2066 | if (advert & ADVERTISE_1000XPAUSE) | |
2067 | advert |= ADVERTISE_PAUSE_CAP; | |
2068 | if (advert & ADVERTISE_1000XPSE_ASYM) | |
2069 | advert |= ADVERTISE_PAUSE_ASYM; | |
2070 | if (lpa & LPA_1000XPAUSE) | |
2071 | lpa |= LPA_PAUSE_CAP; | |
2072 | if (lpa & LPA_1000XPAUSE_ASYM) | |
2073 | lpa |= LPA_PAUSE_ASYM; | |
2074 | } | |
793b883e | 2075 | |
da4c1ff4 SH |
2076 | sky2->flow_status = FC_NONE; |
2077 | if (advert & ADVERTISE_PAUSE_CAP) { | |
2078 | if (lpa & LPA_PAUSE_CAP) | |
2079 | sky2->flow_status = FC_BOTH; | |
2080 | else if (advert & ADVERTISE_PAUSE_ASYM) | |
2081 | sky2->flow_status = FC_RX; | |
2082 | } else if (advert & ADVERTISE_PAUSE_ASYM) { | |
2083 | if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM)) | |
2084 | sky2->flow_status = FC_TX; | |
2085 | } | |
793b883e | 2086 | |
8e95a202 JP |
2087 | if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 && |
2088 | !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)) | |
16ad91e1 | 2089 | sky2->flow_status = FC_NONE; |
2eaba1a2 | 2090 | |
da4c1ff4 | 2091 | if (sky2->flow_status & FC_TX) |
793b883e SH |
2092 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); |
2093 | else | |
2094 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); | |
2095 | ||
2096 | return 0; | |
2097 | } | |
cd28ab6a | 2098 | |
e07b1aa8 SH |
2099 | /* Interrupt from PHY */ |
2100 | static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) | |
cd28ab6a | 2101 | { |
e07b1aa8 SH |
2102 | struct net_device *dev = hw->dev[port]; |
2103 | struct sky2_port *sky2 = netdev_priv(dev); | |
cd28ab6a SH |
2104 | u16 istatus, phystat; |
2105 | ||
ebc646f6 SH |
2106 | if (!netif_running(dev)) |
2107 | return; | |
2108 | ||
e07b1aa8 SH |
2109 | spin_lock(&sky2->phy_lock); |
2110 | istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); | |
2111 | phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); | |
2112 | ||
cd28ab6a SH |
2113 | if (netif_msg_intr(sky2)) |
2114 | printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n", | |
2115 | sky2->netdev->name, istatus, phystat); | |
2116 | ||
0ea065e5 | 2117 | if (istatus & PHY_M_IS_AN_COMPL) { |
793b883e SH |
2118 | if (sky2_autoneg_done(sky2, phystat) == 0) |
2119 | sky2_link_up(sky2); | |
2120 | goto out; | |
2121 | } | |
cd28ab6a | 2122 | |
793b883e SH |
2123 | if (istatus & PHY_M_IS_LSP_CHANGE) |
2124 | sky2->speed = sky2_phy_speed(hw, phystat); | |
cd28ab6a | 2125 | |
793b883e SH |
2126 | if (istatus & PHY_M_IS_DUP_CHANGE) |
2127 | sky2->duplex = | |
2128 | (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; | |
cd28ab6a | 2129 | |
793b883e SH |
2130 | if (istatus & PHY_M_IS_LST_CHANGE) { |
2131 | if (phystat & PHY_M_PS_LINK_UP) | |
cd28ab6a | 2132 | sky2_link_up(sky2); |
793b883e SH |
2133 | else |
2134 | sky2_link_down(sky2); | |
cd28ab6a | 2135 | } |
793b883e | 2136 | out: |
e07b1aa8 | 2137 | spin_unlock(&sky2->phy_lock); |
cd28ab6a SH |
2138 | } |
2139 | ||
0f5aac70 SH |
2140 | /* Special quick link interrupt (Yukon-2 Optima only) */ |
2141 | static void sky2_qlink_intr(struct sky2_hw *hw) | |
2142 | { | |
2143 | struct sky2_port *sky2 = netdev_priv(hw->dev[0]); | |
2144 | u32 imask; | |
2145 | u16 phy; | |
2146 | ||
2147 | /* disable irq */ | |
2148 | imask = sky2_read32(hw, B0_IMSK); | |
2149 | imask &= ~Y2_IS_PHY_QLNK; | |
2150 | sky2_write32(hw, B0_IMSK, imask); | |
2151 | ||
2152 | /* reset PHY Link Detect */ | |
2153 | phy = sky2_pci_read16(hw, PSM_CONFIG_REG4); | |
a40ccc68 | 2154 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
0f5aac70 | 2155 | sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1); |
a40ccc68 | 2156 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
0f5aac70 SH |
2157 | |
2158 | sky2_link_up(sky2); | |
2159 | } | |
2160 | ||
62335ab0 | 2161 | /* Transmit timeout is only called if we are running, carrier is up |
302d1252 SH |
2162 | * and tx queue is full (stopped). |
2163 | */ | |
cd28ab6a SH |
2164 | static void sky2_tx_timeout(struct net_device *dev) |
2165 | { | |
2166 | struct sky2_port *sky2 = netdev_priv(dev); | |
8cc048e3 | 2167 | struct sky2_hw *hw = sky2->hw; |
cd28ab6a SH |
2168 | |
2169 | if (netif_msg_timer(sky2)) | |
2170 | printk(KERN_ERR PFX "%s: tx timeout\n", dev->name); | |
2171 | ||
8f24664d | 2172 | printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n", |
62335ab0 SH |
2173 | dev->name, sky2->tx_cons, sky2->tx_prod, |
2174 | sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX), | |
2175 | sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE))); | |
8f24664d | 2176 | |
81906791 SH |
2177 | /* can't restart safely under softirq */ |
2178 | schedule_work(&hw->restart_work); | |
cd28ab6a SH |
2179 | } |
2180 | ||
2181 | static int sky2_change_mtu(struct net_device *dev, int new_mtu) | |
2182 | { | |
6b1a3aef | 2183 | struct sky2_port *sky2 = netdev_priv(dev); |
2184 | struct sky2_hw *hw = sky2->hw; | |
b628ed98 | 2185 | unsigned port = sky2->port; |
6b1a3aef | 2186 | int err; |
2187 | u16 ctl, mode; | |
e07b1aa8 | 2188 | u32 imask; |
cd28ab6a SH |
2189 | |
2190 | if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) | |
2191 | return -EINVAL; | |
2192 | ||
05745c4a SH |
2193 | if (new_mtu > ETH_DATA_LEN && |
2194 | (hw->chip_id == CHIP_ID_YUKON_FE || | |
2195 | hw->chip_id == CHIP_ID_YUKON_FE_P)) | |
d2adf4f6 SH |
2196 | return -EINVAL; |
2197 | ||
6b1a3aef | 2198 | if (!netif_running(dev)) { |
2199 | dev->mtu = new_mtu; | |
2200 | return 0; | |
2201 | } | |
2202 | ||
e07b1aa8 | 2203 | imask = sky2_read32(hw, B0_IMSK); |
6b1a3aef | 2204 | sky2_write32(hw, B0_IMSK, 0); |
2205 | ||
018d1c66 | 2206 | dev->trans_start = jiffies; /* prevent tx timeout */ |
2207 | netif_stop_queue(dev); | |
bea3348e | 2208 | napi_disable(&hw->napi); |
018d1c66 | 2209 | |
e07b1aa8 SH |
2210 | synchronize_irq(hw->pdev->irq); |
2211 | ||
39dbd958 | 2212 | if (!(hw->flags & SKY2_HW_RAM_BUFFER)) |
69161611 | 2213 | sky2_set_tx_stfwd(hw, port); |
b628ed98 SH |
2214 | |
2215 | ctl = gma_read16(hw, port, GM_GP_CTRL); | |
2216 | gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA); | |
6b1a3aef | 2217 | sky2_rx_stop(sky2); |
2218 | sky2_rx_clean(sky2); | |
cd28ab6a SH |
2219 | |
2220 | dev->mtu = new_mtu; | |
14d0263f | 2221 | |
6b1a3aef | 2222 | mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | |
2223 | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); | |
2224 | ||
2225 | if (dev->mtu > ETH_DATA_LEN) | |
2226 | mode |= GM_SMOD_JUMBO_ENA; | |
2227 | ||
b628ed98 | 2228 | gma_write16(hw, port, GM_SERIAL_MODE, mode); |
cd28ab6a | 2229 | |
b628ed98 | 2230 | sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD); |
cd28ab6a | 2231 | |
6b1a3aef | 2232 | err = sky2_rx_start(sky2); |
e07b1aa8 | 2233 | sky2_write32(hw, B0_IMSK, imask); |
018d1c66 | 2234 | |
d1d08d12 | 2235 | sky2_read32(hw, B0_Y2_SP_LISR); |
bea3348e SH |
2236 | napi_enable(&hw->napi); |
2237 | ||
1b537565 SH |
2238 | if (err) |
2239 | dev_close(dev); | |
2240 | else { | |
b628ed98 | 2241 | gma_write16(hw, port, GM_GP_CTRL, ctl); |
1b537565 | 2242 | |
1b537565 SH |
2243 | netif_wake_queue(dev); |
2244 | } | |
2245 | ||
cd28ab6a SH |
2246 | return err; |
2247 | } | |
2248 | ||
14d0263f SH |
2249 | /* For small just reuse existing skb for next receive */ |
2250 | static struct sk_buff *receive_copy(struct sky2_port *sky2, | |
2251 | const struct rx_ring_info *re, | |
2252 | unsigned length) | |
2253 | { | |
2254 | struct sk_buff *skb; | |
2255 | ||
89d71a66 | 2256 | skb = netdev_alloc_skb_ip_align(sky2->netdev, length); |
14d0263f | 2257 | if (likely(skb)) { |
14d0263f SH |
2258 | pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr, |
2259 | length, PCI_DMA_FROMDEVICE); | |
d626f62b | 2260 | skb_copy_from_linear_data(re->skb, skb->data, length); |
14d0263f SH |
2261 | skb->ip_summed = re->skb->ip_summed; |
2262 | skb->csum = re->skb->csum; | |
2263 | pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, | |
2264 | length, PCI_DMA_FROMDEVICE); | |
2265 | re->skb->ip_summed = CHECKSUM_NONE; | |
489b10c1 | 2266 | skb_put(skb, length); |
14d0263f SH |
2267 | } |
2268 | return skb; | |
2269 | } | |
2270 | ||
2271 | /* Adjust length of skb with fragments to match received data */ | |
2272 | static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, | |
2273 | unsigned int length) | |
2274 | { | |
2275 | int i, num_frags; | |
2276 | unsigned int size; | |
2277 | ||
2278 | /* put header into skb */ | |
2279 | size = min(length, hdr_space); | |
2280 | skb->tail += size; | |
2281 | skb->len += size; | |
2282 | length -= size; | |
2283 | ||
2284 | num_frags = skb_shinfo(skb)->nr_frags; | |
2285 | for (i = 0; i < num_frags; i++) { | |
2286 | skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
2287 | ||
2288 | if (length == 0) { | |
2289 | /* don't need this page */ | |
2290 | __free_page(frag->page); | |
2291 | --skb_shinfo(skb)->nr_frags; | |
2292 | } else { | |
2293 | size = min(length, (unsigned) PAGE_SIZE); | |
2294 | ||
2295 | frag->size = size; | |
2296 | skb->data_len += size; | |
2297 | skb->truesize += size; | |
2298 | skb->len += size; | |
2299 | length -= size; | |
2300 | } | |
2301 | } | |
2302 | } | |
2303 | ||
2304 | /* Normal packet - take skb from ring element and put in a new one */ | |
2305 | static struct sk_buff *receive_new(struct sky2_port *sky2, | |
2306 | struct rx_ring_info *re, | |
2307 | unsigned int length) | |
2308 | { | |
2309 | struct sk_buff *skb, *nskb; | |
2310 | unsigned hdr_space = sky2->rx_data_size; | |
2311 | ||
14d0263f SH |
2312 | /* Don't be tricky about reusing pages (yet) */ |
2313 | nskb = sky2_rx_alloc(sky2); | |
2314 | if (unlikely(!nskb)) | |
2315 | return NULL; | |
2316 | ||
2317 | skb = re->skb; | |
2318 | sky2_rx_unmap_skb(sky2->hw->pdev, re); | |
2319 | ||
2320 | prefetch(skb->data); | |
2321 | re->skb = nskb; | |
454e6cb6 SH |
2322 | if (sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space)) { |
2323 | dev_kfree_skb(nskb); | |
2324 | re->skb = skb; | |
2325 | return NULL; | |
2326 | } | |
14d0263f SH |
2327 | |
2328 | if (skb_shinfo(skb)->nr_frags) | |
2329 | skb_put_frags(skb, hdr_space, length); | |
2330 | else | |
489b10c1 | 2331 | skb_put(skb, length); |
14d0263f SH |
2332 | return skb; |
2333 | } | |
2334 | ||
cd28ab6a SH |
2335 | /* |
2336 | * Receive one packet. | |
d571b694 | 2337 | * For larger packets, get new buffer. |
cd28ab6a | 2338 | */ |
497d7c86 | 2339 | static struct sk_buff *sky2_receive(struct net_device *dev, |
cd28ab6a SH |
2340 | u16 length, u32 status) |
2341 | { | |
497d7c86 | 2342 | struct sky2_port *sky2 = netdev_priv(dev); |
291ea614 | 2343 | struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; |
79e57d32 | 2344 | struct sk_buff *skb = NULL; |
d6532232 SH |
2345 | u16 count = (status & GMR_FS_LEN) >> 16; |
2346 | ||
2347 | #ifdef SKY2_VLAN_TAG_USED | |
2348 | /* Account for vlan tag */ | |
2349 | if (sky2->vlgrp && (status & GMR_FS_VLAN)) | |
2350 | count -= VLAN_HLEN; | |
2351 | #endif | |
cd28ab6a SH |
2352 | |
2353 | if (unlikely(netif_msg_rx_status(sky2))) | |
2354 | printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", | |
497d7c86 | 2355 | dev->name, sky2->rx_next, status, length); |
cd28ab6a | 2356 | |
793b883e | 2357 | sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; |
d70cd51a | 2358 | prefetch(sky2->rx_ring + sky2->rx_next); |
cd28ab6a | 2359 | |
3b12e014 SH |
2360 | /* This chip has hardware problems that generates bogus status. |
2361 | * So do only marginal checking and expect higher level protocols | |
2362 | * to handle crap frames. | |
2363 | */ | |
2364 | if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && | |
2365 | sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 && | |
2366 | length != count) | |
2367 | goto okay; | |
2368 | ||
42eeea01 | 2369 | if (status & GMR_FS_ANY_ERR) |
cd28ab6a SH |
2370 | goto error; |
2371 | ||
42eeea01 | 2372 | if (!(status & GMR_FS_RX_OK)) |
2373 | goto resubmit; | |
2374 | ||
d6532232 SH |
2375 | /* if length reported by DMA does not match PHY, packet was truncated */ |
2376 | if (length != count) | |
3b12e014 | 2377 | goto len_error; |
71749531 | 2378 | |
3b12e014 | 2379 | okay: |
14d0263f SH |
2380 | if (length < copybreak) |
2381 | skb = receive_copy(sky2, re, length); | |
2382 | else | |
2383 | skb = receive_new(sky2, re, length); | |
793b883e | 2384 | resubmit: |
14d0263f | 2385 | sky2_rx_submit(sky2, re); |
79e57d32 | 2386 | |
cd28ab6a SH |
2387 | return skb; |
2388 | ||
3b12e014 | 2389 | len_error: |
71749531 SH |
2390 | /* Truncation of overlength packets |
2391 | causes PHY length to not match MAC length */ | |
7138a0f5 | 2392 | ++dev->stats.rx_length_errors; |
d6532232 | 2393 | if (netif_msg_rx_err(sky2) && net_ratelimit()) |
3b12e014 SH |
2394 | pr_info(PFX "%s: rx length error: status %#x length %d\n", |
2395 | dev->name, status, length); | |
d6532232 | 2396 | goto resubmit; |
71749531 | 2397 | |
cd28ab6a | 2398 | error: |
7138a0f5 | 2399 | ++dev->stats.rx_errors; |
b6d77734 | 2400 | if (status & GMR_FS_RX_FF_OV) { |
7138a0f5 | 2401 | dev->stats.rx_over_errors++; |
b6d77734 SH |
2402 | goto resubmit; |
2403 | } | |
6e15b712 | 2404 | |
3be92a70 | 2405 | if (netif_msg_rx_err(sky2) && net_ratelimit()) |
cd28ab6a | 2406 | printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", |
497d7c86 | 2407 | dev->name, status, length); |
793b883e SH |
2408 | |
2409 | if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE)) | |
7138a0f5 | 2410 | dev->stats.rx_length_errors++; |
cd28ab6a | 2411 | if (status & GMR_FS_FRAGMENT) |
7138a0f5 | 2412 | dev->stats.rx_frame_errors++; |
cd28ab6a | 2413 | if (status & GMR_FS_CRC_ERR) |
7138a0f5 | 2414 | dev->stats.rx_crc_errors++; |
79e57d32 | 2415 | |
793b883e | 2416 | goto resubmit; |
cd28ab6a SH |
2417 | } |
2418 | ||
e07b1aa8 SH |
2419 | /* Transmit complete */ |
2420 | static inline void sky2_tx_done(struct net_device *dev, u16 last) | |
13b97b74 | 2421 | { |
e07b1aa8 | 2422 | struct sky2_port *sky2 = netdev_priv(dev); |
302d1252 | 2423 | |
49d4b8ba | 2424 | if (netif_running(dev)) |
e07b1aa8 | 2425 | sky2_tx_complete(sky2, last); |
cd28ab6a SH |
2426 | } |
2427 | ||
37e5a243 SH |
2428 | static inline void sky2_skb_rx(const struct sky2_port *sky2, |
2429 | u32 status, struct sk_buff *skb) | |
2430 | { | |
2431 | #ifdef SKY2_VLAN_TAG_USED | |
2432 | u16 vlan_tag = be16_to_cpu(sky2->rx_tag); | |
2433 | if (sky2->vlgrp && (status & GMR_FS_VLAN)) { | |
2434 | if (skb->ip_summed == CHECKSUM_NONE) | |
2435 | vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag); | |
2436 | else | |
2437 | vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp, | |
2438 | vlan_tag, skb); | |
2439 | return; | |
2440 | } | |
2441 | #endif | |
2442 | if (skb->ip_summed == CHECKSUM_NONE) | |
2443 | netif_receive_skb(skb); | |
2444 | else | |
2445 | napi_gro_receive(&sky2->hw->napi, skb); | |
2446 | } | |
2447 | ||
bf15fe99 SH |
2448 | static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port, |
2449 | unsigned packets, unsigned bytes) | |
2450 | { | |
2451 | if (packets) { | |
2452 | struct net_device *dev = hw->dev[port]; | |
2453 | ||
2454 | dev->stats.rx_packets += packets; | |
2455 | dev->stats.rx_bytes += bytes; | |
2456 | dev->last_rx = jiffies; | |
2457 | sky2_rx_update(netdev_priv(dev), rxqaddr[port]); | |
2458 | } | |
2459 | } | |
2460 | ||
e07b1aa8 | 2461 | /* Process status response ring */ |
26691830 | 2462 | static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) |
cd28ab6a | 2463 | { |
e07b1aa8 | 2464 | int work_done = 0; |
bf15fe99 SH |
2465 | unsigned int total_bytes[2] = { 0 }; |
2466 | unsigned int total_packets[2] = { 0 }; | |
a8fd6266 | 2467 | |
af2a58ac | 2468 | rmb(); |
26691830 | 2469 | do { |
55c9dd35 | 2470 | struct sky2_port *sky2; |
13210ce5 | 2471 | struct sky2_status_le *le = hw->st_le + hw->st_idx; |
ab5adecb | 2472 | unsigned port; |
13210ce5 | 2473 | struct net_device *dev; |
cd28ab6a | 2474 | struct sk_buff *skb; |
cd28ab6a SH |
2475 | u32 status; |
2476 | u16 length; | |
ab5adecb SH |
2477 | u8 opcode = le->opcode; |
2478 | ||
2479 | if (!(opcode & HW_OWNER)) | |
2480 | break; | |
cd28ab6a | 2481 | |
cb5d9547 | 2482 | hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE); |
bea86103 | 2483 | |
ab5adecb | 2484 | port = le->css & CSS_LINK_BIT; |
69161611 | 2485 | dev = hw->dev[port]; |
13210ce5 | 2486 | sky2 = netdev_priv(dev); |
f65b138c SH |
2487 | length = le16_to_cpu(le->length); |
2488 | status = le32_to_cpu(le->status); | |
cd28ab6a | 2489 | |
ab5adecb SH |
2490 | le->opcode = 0; |
2491 | switch (opcode & ~HW_OWNER) { | |
cd28ab6a | 2492 | case OP_RXSTAT: |
bf15fe99 SH |
2493 | total_packets[port]++; |
2494 | total_bytes[port] += length; | |
497d7c86 | 2495 | skb = sky2_receive(dev, length, status); |
3225b919 | 2496 | if (unlikely(!skb)) { |
7138a0f5 | 2497 | dev->stats.rx_dropped++; |
55c9dd35 | 2498 | break; |
3225b919 | 2499 | } |
13210ce5 | 2500 | |
69161611 | 2501 | /* This chip reports checksum status differently */ |
05745c4a | 2502 | if (hw->flags & SKY2_HW_NEW_LE) { |
0ea065e5 | 2503 | if ((sky2->flags & SKY2_FLAG_RX_CHECKSUM) && |
69161611 SH |
2504 | (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) && |
2505 | (le->css & CSS_TCPUDPCSOK)) | |
2506 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
2507 | else | |
2508 | skb->ip_summed = CHECKSUM_NONE; | |
2509 | } | |
2510 | ||
13210ce5 | 2511 | skb->protocol = eth_type_trans(skb, dev); |
13210ce5 | 2512 | |
37e5a243 | 2513 | sky2_skb_rx(sky2, status, skb); |
13210ce5 | 2514 | |
22e11703 | 2515 | /* Stop after net poll weight */ |
13210ce5 | 2516 | if (++work_done >= to_do) |
2517 | goto exit_loop; | |
cd28ab6a SH |
2518 | break; |
2519 | ||
d1f13708 | 2520 | #ifdef SKY2_VLAN_TAG_USED |
2521 | case OP_RXVLAN: | |
2522 | sky2->rx_tag = length; | |
2523 | break; | |
2524 | ||
2525 | case OP_RXCHKSVLAN: | |
2526 | sky2->rx_tag = length; | |
2527 | /* fall through */ | |
2528 | #endif | |
cd28ab6a | 2529 | case OP_RXCHKS: |
0ea065e5 | 2530 | if (!(sky2->flags & SKY2_FLAG_RX_CHECKSUM)) |
87418307 SH |
2531 | break; |
2532 | ||
05745c4a SH |
2533 | /* If this happens then driver assuming wrong format */ |
2534 | if (unlikely(hw->flags & SKY2_HW_NEW_LE)) { | |
2535 | if (net_ratelimit()) | |
2536 | printk(KERN_NOTICE "%s: unexpected" | |
2537 | " checksum status\n", | |
2538 | dev->name); | |
69161611 | 2539 | break; |
05745c4a | 2540 | } |
69161611 | 2541 | |
87418307 SH |
2542 | /* Both checksum counters are programmed to start at |
2543 | * the same offset, so unless there is a problem they | |
2544 | * should match. This failure is an early indication that | |
2545 | * hardware receive checksumming won't work. | |
2546 | */ | |
2547 | if (likely(status >> 16 == (status & 0xffff))) { | |
2548 | skb = sky2->rx_ring[sky2->rx_next].skb; | |
2549 | skb->ip_summed = CHECKSUM_COMPLETE; | |
b9389796 | 2550 | skb->csum = le16_to_cpu(status); |
87418307 SH |
2551 | } else { |
2552 | printk(KERN_NOTICE PFX "%s: hardware receive " | |
2553 | "checksum problem (status = %#x)\n", | |
2554 | dev->name, status); | |
0ea065e5 SH |
2555 | sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM; |
2556 | ||
87418307 | 2557 | sky2_write32(sky2->hw, |
69161611 | 2558 | Q_ADDR(rxqaddr[port], Q_CSR), |
87418307 SH |
2559 | BMU_DIS_RX_CHKSUM); |
2560 | } | |
cd28ab6a SH |
2561 | break; |
2562 | ||
2563 | case OP_TXINDEXLE: | |
13b97b74 | 2564 | /* TX index reports status for both ports */ |
f55925d7 | 2565 | sky2_tx_done(hw->dev[0], status & 0xfff); |
e07b1aa8 SH |
2566 | if (hw->dev[1]) |
2567 | sky2_tx_done(hw->dev[1], | |
2568 | ((status >> 24) & 0xff) | |
2569 | | (u16)(length & 0xf) << 8); | |
cd28ab6a SH |
2570 | break; |
2571 | ||
cd28ab6a SH |
2572 | default: |
2573 | if (net_ratelimit()) | |
793b883e | 2574 | printk(KERN_WARNING PFX |
ab5adecb | 2575 | "unknown status opcode 0x%x\n", opcode); |
cd28ab6a | 2576 | } |
26691830 | 2577 | } while (hw->st_idx != idx); |
cd28ab6a | 2578 | |
fe2a24df SH |
2579 | /* Fully processed status ring so clear irq */ |
2580 | sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); | |
2581 | ||
13210ce5 | 2582 | exit_loop: |
bf15fe99 SH |
2583 | sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]); |
2584 | sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]); | |
22e11703 | 2585 | |
e07b1aa8 | 2586 | return work_done; |
cd28ab6a SH |
2587 | } |
2588 | ||
2589 | static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status) | |
2590 | { | |
2591 | struct net_device *dev = hw->dev[port]; | |
2592 | ||
3be92a70 SH |
2593 | if (net_ratelimit()) |
2594 | printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n", | |
2595 | dev->name, status); | |
cd28ab6a SH |
2596 | |
2597 | if (status & Y2_IS_PAR_RD1) { | |
3be92a70 SH |
2598 | if (net_ratelimit()) |
2599 | printk(KERN_ERR PFX "%s: ram data read parity error\n", | |
2600 | dev->name); | |
cd28ab6a SH |
2601 | /* Clear IRQ */ |
2602 | sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR); | |
2603 | } | |
2604 | ||
2605 | if (status & Y2_IS_PAR_WR1) { | |
3be92a70 SH |
2606 | if (net_ratelimit()) |
2607 | printk(KERN_ERR PFX "%s: ram data write parity error\n", | |
2608 | dev->name); | |
cd28ab6a SH |
2609 | |
2610 | sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR); | |
2611 | } | |
2612 | ||
2613 | if (status & Y2_IS_PAR_MAC1) { | |
3be92a70 SH |
2614 | if (net_ratelimit()) |
2615 | printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name); | |
cd28ab6a SH |
2616 | sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE); |
2617 | } | |
2618 | ||
2619 | if (status & Y2_IS_PAR_RX1) { | |
3be92a70 SH |
2620 | if (net_ratelimit()) |
2621 | printk(KERN_ERR PFX "%s: RX parity error\n", dev->name); | |
cd28ab6a SH |
2622 | sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR); |
2623 | } | |
2624 | ||
2625 | if (status & Y2_IS_TCP_TXA1) { | |
3be92a70 SH |
2626 | if (net_ratelimit()) |
2627 | printk(KERN_ERR PFX "%s: TCP segmentation error\n", | |
2628 | dev->name); | |
cd28ab6a SH |
2629 | sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP); |
2630 | } | |
2631 | } | |
2632 | ||
2633 | static void sky2_hw_intr(struct sky2_hw *hw) | |
2634 | { | |
555382cb | 2635 | struct pci_dev *pdev = hw->pdev; |
cd28ab6a | 2636 | u32 status = sky2_read32(hw, B0_HWE_ISRC); |
555382cb SH |
2637 | u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK); |
2638 | ||
2639 | status &= hwmsk; | |
cd28ab6a | 2640 | |
793b883e | 2641 | if (status & Y2_IS_TIST_OV) |
cd28ab6a | 2642 | sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); |
cd28ab6a SH |
2643 | |
2644 | if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { | |
793b883e SH |
2645 | u16 pci_err; |
2646 | ||
a40ccc68 | 2647 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
b32f40c4 | 2648 | pci_err = sky2_pci_read16(hw, PCI_STATUS); |
3be92a70 | 2649 | if (net_ratelimit()) |
555382cb | 2650 | dev_err(&pdev->dev, "PCI hardware error (0x%x)\n", |
b02a9258 | 2651 | pci_err); |
cd28ab6a | 2652 | |
b32f40c4 | 2653 | sky2_pci_write16(hw, PCI_STATUS, |
167f53d0 | 2654 | pci_err | PCI_STATUS_ERROR_BITS); |
a40ccc68 | 2655 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
cd28ab6a SH |
2656 | } |
2657 | ||
2658 | if (status & Y2_IS_PCI_EXP) { | |
d571b694 | 2659 | /* PCI-Express uncorrectable Error occurred */ |
555382cb | 2660 | u32 err; |
cd28ab6a | 2661 | |
a40ccc68 | 2662 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
7782c8c4 SH |
2663 | err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); |
2664 | sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, | |
2665 | 0xfffffffful); | |
3be92a70 | 2666 | if (net_ratelimit()) |
555382cb | 2667 | dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err); |
cf06ffb4 | 2668 | |
7782c8c4 | 2669 | sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); |
a40ccc68 | 2670 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
cd28ab6a SH |
2671 | } |
2672 | ||
2673 | if (status & Y2_HWE_L1_MASK) | |
2674 | sky2_hw_error(hw, 0, status); | |
2675 | status >>= 8; | |
2676 | if (status & Y2_HWE_L1_MASK) | |
2677 | sky2_hw_error(hw, 1, status); | |
2678 | } | |
2679 | ||
2680 | static void sky2_mac_intr(struct sky2_hw *hw, unsigned port) | |
2681 | { | |
2682 | struct net_device *dev = hw->dev[port]; | |
2683 | struct sky2_port *sky2 = netdev_priv(dev); | |
2684 | u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC)); | |
2685 | ||
2686 | if (netif_msg_intr(sky2)) | |
2687 | printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n", | |
2688 | dev->name, status); | |
2689 | ||
a3caeada SH |
2690 | if (status & GM_IS_RX_CO_OV) |
2691 | gma_read16(hw, port, GM_RX_IRQ_SRC); | |
2692 | ||
2693 | if (status & GM_IS_TX_CO_OV) | |
2694 | gma_read16(hw, port, GM_TX_IRQ_SRC); | |
2695 | ||
cd28ab6a | 2696 | if (status & GM_IS_RX_FF_OR) { |
7138a0f5 | 2697 | ++dev->stats.rx_fifo_errors; |
cd28ab6a SH |
2698 | sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO); |
2699 | } | |
2700 | ||
2701 | if (status & GM_IS_TX_FF_UR) { | |
7138a0f5 | 2702 | ++dev->stats.tx_fifo_errors; |
cd28ab6a SH |
2703 | sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU); |
2704 | } | |
cd28ab6a SH |
2705 | } |
2706 | ||
40b01727 | 2707 | /* This should never happen it is a bug. */ |
c119731d | 2708 | static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q) |
d257924e SH |
2709 | { |
2710 | struct net_device *dev = hw->dev[port]; | |
c119731d | 2711 | u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); |
d257924e | 2712 | |
c119731d SH |
2713 | dev_err(&hw->pdev->dev, PFX |
2714 | "%s: descriptor error q=%#x get=%u put=%u\n", | |
2715 | dev->name, (unsigned) q, (unsigned) idx, | |
2716 | (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX))); | |
d257924e | 2717 | |
40b01727 | 2718 | sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK); |
d257924e | 2719 | } |
cd28ab6a | 2720 | |
75e80683 SH |
2721 | static int sky2_rx_hung(struct net_device *dev) |
2722 | { | |
2723 | struct sky2_port *sky2 = netdev_priv(dev); | |
2724 | struct sky2_hw *hw = sky2->hw; | |
2725 | unsigned port = sky2->port; | |
2726 | unsigned rxq = rxqaddr[port]; | |
2727 | u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP)); | |
2728 | u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV)); | |
2729 | u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP)); | |
2730 | u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL)); | |
2731 | ||
2732 | /* If idle and MAC or PCI is stuck */ | |
2733 | if (sky2->check.last == dev->last_rx && | |
2734 | ((mac_rp == sky2->check.mac_rp && | |
2735 | mac_lev != 0 && mac_lev >= sky2->check.mac_lev) || | |
2736 | /* Check if the PCI RX hang */ | |
2737 | (fifo_rp == sky2->check.fifo_rp && | |
2738 | fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) { | |
2739 | printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n", | |
2740 | dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp, | |
2741 | sky2_read8(hw, Q_ADDR(rxq, Q_WP))); | |
2742 | return 1; | |
2743 | } else { | |
2744 | sky2->check.last = dev->last_rx; | |
2745 | sky2->check.mac_rp = mac_rp; | |
2746 | sky2->check.mac_lev = mac_lev; | |
2747 | sky2->check.fifo_rp = fifo_rp; | |
2748 | sky2->check.fifo_lev = fifo_lev; | |
2749 | return 0; | |
2750 | } | |
2751 | } | |
2752 | ||
32c2c300 | 2753 | static void sky2_watchdog(unsigned long arg) |
d27ed387 | 2754 | { |
01bd7564 | 2755 | struct sky2_hw *hw = (struct sky2_hw *) arg; |
d27ed387 | 2756 | |
75e80683 | 2757 | /* Check for lost IRQ once a second */ |
32c2c300 | 2758 | if (sky2_read32(hw, B0_ISRC)) { |
bea3348e | 2759 | napi_schedule(&hw->napi); |
75e80683 SH |
2760 | } else { |
2761 | int i, active = 0; | |
2762 | ||
2763 | for (i = 0; i < hw->ports; i++) { | |
bea3348e | 2764 | struct net_device *dev = hw->dev[i]; |
75e80683 SH |
2765 | if (!netif_running(dev)) |
2766 | continue; | |
2767 | ++active; | |
2768 | ||
2769 | /* For chips with Rx FIFO, check if stuck */ | |
39dbd958 | 2770 | if ((hw->flags & SKY2_HW_RAM_BUFFER) && |
75e80683 SH |
2771 | sky2_rx_hung(dev)) { |
2772 | pr_info(PFX "%s: receiver hang detected\n", | |
2773 | dev->name); | |
2774 | schedule_work(&hw->restart_work); | |
2775 | return; | |
2776 | } | |
2777 | } | |
2778 | ||
2779 | if (active == 0) | |
2780 | return; | |
32c2c300 | 2781 | } |
01bd7564 | 2782 | |
75e80683 | 2783 | mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ)); |
d27ed387 SH |
2784 | } |
2785 | ||
40b01727 SH |
2786 | /* Hardware/software error handling */ |
2787 | static void sky2_err_intr(struct sky2_hw *hw, u32 status) | |
cd28ab6a | 2788 | { |
40b01727 SH |
2789 | if (net_ratelimit()) |
2790 | dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status); | |
cd28ab6a | 2791 | |
1e5f1283 SH |
2792 | if (status & Y2_IS_HW_ERR) |
2793 | sky2_hw_intr(hw); | |
d257924e | 2794 | |
1e5f1283 SH |
2795 | if (status & Y2_IS_IRQ_MAC1) |
2796 | sky2_mac_intr(hw, 0); | |
cd28ab6a | 2797 | |
1e5f1283 SH |
2798 | if (status & Y2_IS_IRQ_MAC2) |
2799 | sky2_mac_intr(hw, 1); | |
cd28ab6a | 2800 | |
1e5f1283 | 2801 | if (status & Y2_IS_CHK_RX1) |
c119731d | 2802 | sky2_le_error(hw, 0, Q_R1); |
d257924e | 2803 | |
1e5f1283 | 2804 | if (status & Y2_IS_CHK_RX2) |
c119731d | 2805 | sky2_le_error(hw, 1, Q_R2); |
d257924e | 2806 | |
1e5f1283 | 2807 | if (status & Y2_IS_CHK_TXA1) |
c119731d | 2808 | sky2_le_error(hw, 0, Q_XA1); |
d257924e | 2809 | |
1e5f1283 | 2810 | if (status & Y2_IS_CHK_TXA2) |
c119731d | 2811 | sky2_le_error(hw, 1, Q_XA2); |
40b01727 SH |
2812 | } |
2813 | ||
bea3348e | 2814 | static int sky2_poll(struct napi_struct *napi, int work_limit) |
40b01727 | 2815 | { |
bea3348e | 2816 | struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi); |
40b01727 | 2817 | u32 status = sky2_read32(hw, B0_Y2_SP_EISR); |
6f535763 | 2818 | int work_done = 0; |
26691830 | 2819 | u16 idx; |
40b01727 SH |
2820 | |
2821 | if (unlikely(status & Y2_IS_ERROR)) | |
2822 | sky2_err_intr(hw, status); | |
2823 | ||
2824 | if (status & Y2_IS_IRQ_PHY1) | |
2825 | sky2_phy_intr(hw, 0); | |
2826 | ||
2827 | if (status & Y2_IS_IRQ_PHY2) | |
2828 | sky2_phy_intr(hw, 1); | |
cd28ab6a | 2829 | |
0f5aac70 SH |
2830 | if (status & Y2_IS_PHY_QLNK) |
2831 | sky2_qlink_intr(hw); | |
2832 | ||
26691830 SH |
2833 | while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) { |
2834 | work_done += sky2_status_intr(hw, work_limit - work_done, idx); | |
6f535763 DM |
2835 | |
2836 | if (work_done >= work_limit) | |
26691830 SH |
2837 | goto done; |
2838 | } | |
6f535763 | 2839 | |
26691830 SH |
2840 | napi_complete(napi); |
2841 | sky2_read32(hw, B0_Y2_SP_LISR); | |
2842 | done: | |
6f535763 | 2843 | |
bea3348e | 2844 | return work_done; |
e07b1aa8 SH |
2845 | } |
2846 | ||
7d12e780 | 2847 | static irqreturn_t sky2_intr(int irq, void *dev_id) |
e07b1aa8 SH |
2848 | { |
2849 | struct sky2_hw *hw = dev_id; | |
e07b1aa8 SH |
2850 | u32 status; |
2851 | ||
2852 | /* Reading this mask interrupts as side effect */ | |
2853 | status = sky2_read32(hw, B0_Y2_SP_ISRC2); | |
2854 | if (status == 0 || status == ~0) | |
2855 | return IRQ_NONE; | |
793b883e | 2856 | |
e07b1aa8 | 2857 | prefetch(&hw->st_le[hw->st_idx]); |
bea3348e SH |
2858 | |
2859 | napi_schedule(&hw->napi); | |
793b883e | 2860 | |
cd28ab6a SH |
2861 | return IRQ_HANDLED; |
2862 | } | |
2863 | ||
2864 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
2865 | static void sky2_netpoll(struct net_device *dev) | |
2866 | { | |
2867 | struct sky2_port *sky2 = netdev_priv(dev); | |
2868 | ||
bea3348e | 2869 | napi_schedule(&sky2->hw->napi); |
cd28ab6a SH |
2870 | } |
2871 | #endif | |
2872 | ||
2873 | /* Chip internal frequency for clock calculations */ | |
05745c4a | 2874 | static u32 sky2_mhz(const struct sky2_hw *hw) |
cd28ab6a | 2875 | { |
793b883e | 2876 | switch (hw->chip_id) { |
cd28ab6a | 2877 | case CHIP_ID_YUKON_EC: |
5a5b1ea0 | 2878 | case CHIP_ID_YUKON_EC_U: |
93745494 | 2879 | case CHIP_ID_YUKON_EX: |
ed4d4161 | 2880 | case CHIP_ID_YUKON_SUPR: |
0ce8b98d | 2881 | case CHIP_ID_YUKON_UL_2: |
0f5aac70 | 2882 | case CHIP_ID_YUKON_OPT: |
05745c4a SH |
2883 | return 125; |
2884 | ||
cd28ab6a | 2885 | case CHIP_ID_YUKON_FE: |
05745c4a SH |
2886 | return 100; |
2887 | ||
2888 | case CHIP_ID_YUKON_FE_P: | |
2889 | return 50; | |
2890 | ||
2891 | case CHIP_ID_YUKON_XL: | |
2892 | return 156; | |
2893 | ||
2894 | default: | |
2895 | BUG(); | |
cd28ab6a SH |
2896 | } |
2897 | } | |
2898 | ||
fb17358f | 2899 | static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) |
cd28ab6a | 2900 | { |
fb17358f | 2901 | return sky2_mhz(hw) * us; |
cd28ab6a SH |
2902 | } |
2903 | ||
fb17358f | 2904 | static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) |
cd28ab6a | 2905 | { |
fb17358f | 2906 | return clk / sky2_mhz(hw); |
cd28ab6a SH |
2907 | } |
2908 | ||
fb17358f | 2909 | |
e3173832 | 2910 | static int __devinit sky2_init(struct sky2_hw *hw) |
cd28ab6a | 2911 | { |
b89165f2 | 2912 | u8 t8; |
cd28ab6a | 2913 | |
167f53d0 | 2914 | /* Enable all clocks and check for bad PCI access */ |
b32f40c4 | 2915 | sky2_pci_write32(hw, PCI_DEV_REG3, 0); |
451af335 | 2916 | |
cd28ab6a | 2917 | sky2_write8(hw, B0_CTST, CS_RST_CLR); |
08c06d8a | 2918 | |
cd28ab6a | 2919 | hw->chip_id = sky2_read8(hw, B2_CHIP_ID); |
ea76e635 SH |
2920 | hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; |
2921 | ||
2922 | switch(hw->chip_id) { | |
2923 | case CHIP_ID_YUKON_XL: | |
39dbd958 | 2924 | hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY; |
ea76e635 SH |
2925 | break; |
2926 | ||
2927 | case CHIP_ID_YUKON_EC_U: | |
2928 | hw->flags = SKY2_HW_GIGABIT | |
2929 | | SKY2_HW_NEWER_PHY | |
2930 | | SKY2_HW_ADV_POWER_CTL; | |
2931 | break; | |
2932 | ||
2933 | case CHIP_ID_YUKON_EX: | |
2934 | hw->flags = SKY2_HW_GIGABIT | |
2935 | | SKY2_HW_NEWER_PHY | |
2936 | | SKY2_HW_NEW_LE | |
2937 | | SKY2_HW_ADV_POWER_CTL; | |
2938 | ||
2939 | /* New transmit checksum */ | |
2940 | if (hw->chip_rev != CHIP_REV_YU_EX_B0) | |
2941 | hw->flags |= SKY2_HW_AUTO_TX_SUM; | |
2942 | break; | |
2943 | ||
2944 | case CHIP_ID_YUKON_EC: | |
2945 | /* This rev is really old, and requires untested workarounds */ | |
2946 | if (hw->chip_rev == CHIP_REV_YU_EC_A1) { | |
2947 | dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); | |
2948 | return -EOPNOTSUPP; | |
2949 | } | |
39dbd958 | 2950 | hw->flags = SKY2_HW_GIGABIT; |
ea76e635 SH |
2951 | break; |
2952 | ||
2953 | case CHIP_ID_YUKON_FE: | |
ea76e635 SH |
2954 | break; |
2955 | ||
05745c4a SH |
2956 | case CHIP_ID_YUKON_FE_P: |
2957 | hw->flags = SKY2_HW_NEWER_PHY | |
2958 | | SKY2_HW_NEW_LE | |
2959 | | SKY2_HW_AUTO_TX_SUM | |
2960 | | SKY2_HW_ADV_POWER_CTL; | |
2961 | break; | |
ed4d4161 SH |
2962 | |
2963 | case CHIP_ID_YUKON_SUPR: | |
2964 | hw->flags = SKY2_HW_GIGABIT | |
2965 | | SKY2_HW_NEWER_PHY | |
2966 | | SKY2_HW_NEW_LE | |
2967 | | SKY2_HW_AUTO_TX_SUM | |
2968 | | SKY2_HW_ADV_POWER_CTL; | |
2969 | break; | |
2970 | ||
0ce8b98d | 2971 | case CHIP_ID_YUKON_UL_2: |
b338682d TI |
2972 | hw->flags = SKY2_HW_GIGABIT |
2973 | | SKY2_HW_ADV_POWER_CTL; | |
2974 | break; | |
2975 | ||
0f5aac70 | 2976 | case CHIP_ID_YUKON_OPT: |
0ce8b98d | 2977 | hw->flags = SKY2_HW_GIGABIT |
b338682d | 2978 | | SKY2_HW_NEW_LE |
0ce8b98d SH |
2979 | | SKY2_HW_ADV_POWER_CTL; |
2980 | break; | |
2981 | ||
ea76e635 | 2982 | default: |
b02a9258 SH |
2983 | dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", |
2984 | hw->chip_id); | |
cd28ab6a SH |
2985 | return -EOPNOTSUPP; |
2986 | } | |
2987 | ||
ea76e635 SH |
2988 | hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); |
2989 | if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P') | |
2990 | hw->flags |= SKY2_HW_FIBRE_PHY; | |
290d4de5 | 2991 | |
e3173832 SH |
2992 | hw->ports = 1; |
2993 | t8 = sky2_read8(hw, B2_Y2_HW_RES); | |
2994 | if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { | |
2995 | if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) | |
2996 | ++hw->ports; | |
2997 | } | |
2998 | ||
74a61ebf MM |
2999 | if (sky2_read8(hw, B2_E_0)) |
3000 | hw->flags |= SKY2_HW_RAM_BUFFER; | |
3001 | ||
e3173832 SH |
3002 | return 0; |
3003 | } | |
3004 | ||
3005 | static void sky2_reset(struct sky2_hw *hw) | |
3006 | { | |
555382cb | 3007 | struct pci_dev *pdev = hw->pdev; |
e3173832 | 3008 | u16 status; |
555382cb SH |
3009 | int i, cap; |
3010 | u32 hwe_mask = Y2_HWE_ALL_MASK; | |
e3173832 | 3011 | |
cd28ab6a | 3012 | /* disable ASF */ |
4f44d8ba SH |
3013 | if (hw->chip_id == CHIP_ID_YUKON_EX) { |
3014 | status = sky2_read16(hw, HCU_CCSR); | |
3015 | status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE | | |
3016 | HCU_CCSR_UC_STATE_MSK); | |
3017 | sky2_write16(hw, HCU_CCSR, status); | |
3018 | } else | |
3019 | sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); | |
3020 | sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE); | |
cd28ab6a SH |
3021 | |
3022 | /* do a SW reset */ | |
3023 | sky2_write8(hw, B0_CTST, CS_RST_SET); | |
3024 | sky2_write8(hw, B0_CTST, CS_RST_CLR); | |
3025 | ||
ac93a394 SH |
3026 | /* allow writes to PCI config */ |
3027 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); | |
3028 | ||
cd28ab6a | 3029 | /* clear PCI errors, if any */ |
b32f40c4 | 3030 | status = sky2_pci_read16(hw, PCI_STATUS); |
167f53d0 | 3031 | status |= PCI_STATUS_ERROR_BITS; |
b32f40c4 | 3032 | sky2_pci_write16(hw, PCI_STATUS, status); |
cd28ab6a SH |
3033 | |
3034 | sky2_write8(hw, B0_CTST, CS_MRST_CLR); | |
3035 | ||
555382cb SH |
3036 | cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
3037 | if (cap) { | |
7782c8c4 SH |
3038 | sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, |
3039 | 0xfffffffful); | |
555382cb SH |
3040 | |
3041 | /* If error bit is stuck on ignore it */ | |
3042 | if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP) | |
3043 | dev_info(&pdev->dev, "ignoring stuck error report bit\n"); | |
7782c8c4 | 3044 | else |
555382cb SH |
3045 | hwe_mask |= Y2_IS_PCI_EXP; |
3046 | } | |
cd28ab6a | 3047 | |
ae306cca | 3048 | sky2_power_on(hw); |
a40ccc68 | 3049 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
cd28ab6a SH |
3050 | |
3051 | for (i = 0; i < hw->ports; i++) { | |
3052 | sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); | |
3053 | sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); | |
69161611 | 3054 | |
ed4d4161 SH |
3055 | if (hw->chip_id == CHIP_ID_YUKON_EX || |
3056 | hw->chip_id == CHIP_ID_YUKON_SUPR) | |
69161611 SH |
3057 | sky2_write16(hw, SK_REG(i, GMAC_CTRL), |
3058 | GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | |
3059 | | GMC_BYP_RETR_ON); | |
877c8570 SH |
3060 | |
3061 | } | |
3062 | ||
3063 | if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) { | |
3064 | /* enable MACSec clock gating */ | |
3065 | sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS); | |
cd28ab6a SH |
3066 | } |
3067 | ||
0f5aac70 SH |
3068 | if (hw->chip_id == CHIP_ID_YUKON_OPT) { |
3069 | u16 reg; | |
3070 | u32 msk; | |
3071 | ||
3072 | if (hw->chip_rev == 0) { | |
3073 | /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */ | |
3074 | sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7)); | |
3075 | ||
3076 | /* set PHY Link Detect Timer to 1.1 second (11x 100ms) */ | |
3077 | reg = 10; | |
3078 | } else { | |
3079 | /* set PHY Link Detect Timer to 0.4 second (4x 100ms) */ | |
3080 | reg = 3; | |
3081 | } | |
3082 | ||
3083 | reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE; | |
3084 | ||
3085 | /* reset PHY Link Detect */ | |
a40ccc68 | 3086 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
0f5aac70 SH |
3087 | sky2_pci_write16(hw, PSM_CONFIG_REG4, |
3088 | reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT); | |
3089 | sky2_pci_write16(hw, PSM_CONFIG_REG4, reg); | |
3090 | ||
3091 | ||
3092 | /* enable PHY Quick Link */ | |
3093 | msk = sky2_read32(hw, B0_IMSK); | |
3094 | msk |= Y2_IS_PHY_QLNK; | |
3095 | sky2_write32(hw, B0_IMSK, msk); | |
3096 | ||
3097 | /* check if PSMv2 was running before */ | |
3098 | reg = sky2_pci_read16(hw, PSM_CONFIG_REG3); | |
3099 | if (reg & PCI_EXP_LNKCTL_ASPMC) { | |
3100 | int cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); | |
3101 | /* restore the PCIe Link Control register */ | |
3102 | sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg); | |
3103 | } | |
a40ccc68 | 3104 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
0f5aac70 SH |
3105 | |
3106 | /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */ | |
3107 | sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16)); | |
3108 | } | |
3109 | ||
793b883e SH |
3110 | /* Clear I2C IRQ noise */ |
3111 | sky2_write32(hw, B2_I2C_IRQ, 1); | |
cd28ab6a SH |
3112 | |
3113 | /* turn off hardware timer (unused) */ | |
3114 | sky2_write8(hw, B2_TI_CTRL, TIM_STOP); | |
3115 | sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ); | |
793b883e | 3116 | |
69634ee7 SH |
3117 | /* Turn off descriptor polling */ |
3118 | sky2_write32(hw, B28_DPT_CTRL, DPT_STOP); | |
cd28ab6a SH |
3119 | |
3120 | /* Turn off receive timestamp */ | |
3121 | sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP); | |
793b883e | 3122 | sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); |
cd28ab6a SH |
3123 | |
3124 | /* enable the Tx Arbiters */ | |
3125 | for (i = 0; i < hw->ports; i++) | |
3126 | sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB); | |
3127 | ||
3128 | /* Initialize ram interface */ | |
3129 | for (i = 0; i < hw->ports; i++) { | |
793b883e | 3130 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR); |
cd28ab6a SH |
3131 | |
3132 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53); | |
3133 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53); | |
3134 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53); | |
3135 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53); | |
3136 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53); | |
3137 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53); | |
3138 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53); | |
3139 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53); | |
3140 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53); | |
3141 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53); | |
3142 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53); | |
3143 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); | |
3144 | } | |
3145 | ||
555382cb | 3146 | sky2_write32(hw, B0_HWE_IMSK, hwe_mask); |
cd28ab6a | 3147 | |
cd28ab6a | 3148 | for (i = 0; i < hw->ports; i++) |
d3bcfbeb | 3149 | sky2_gmac_reset(hw, i); |
cd28ab6a | 3150 | |
cd28ab6a SH |
3151 | memset(hw->st_le, 0, STATUS_LE_BYTES); |
3152 | hw->st_idx = 0; | |
3153 | ||
3154 | sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET); | |
3155 | sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR); | |
3156 | ||
3157 | sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma); | |
793b883e | 3158 | sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32); |
cd28ab6a SH |
3159 | |
3160 | /* Set the list last index */ | |
793b883e | 3161 | sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1); |
cd28ab6a | 3162 | |
290d4de5 SH |
3163 | sky2_write16(hw, STAT_TX_IDX_TH, 10); |
3164 | sky2_write8(hw, STAT_FIFO_WM, 16); | |
cd28ab6a | 3165 | |
290d4de5 SH |
3166 | /* set Status-FIFO ISR watermark */ |
3167 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) | |
3168 | sky2_write8(hw, STAT_FIFO_ISR_WM, 4); | |
3169 | else | |
3170 | sky2_write8(hw, STAT_FIFO_ISR_WM, 16); | |
cd28ab6a | 3171 | |
290d4de5 | 3172 | sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); |
77b3d6a2 SH |
3173 | sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20)); |
3174 | sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100)); | |
cd28ab6a | 3175 | |
793b883e | 3176 | /* enable status unit */ |
cd28ab6a SH |
3177 | sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON); |
3178 | ||
3179 | sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); | |
3180 | sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); | |
3181 | sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); | |
e3173832 SH |
3182 | } |
3183 | ||
af18d8b8 SH |
3184 | /* Take device down (offline). |
3185 | * Equivalent to doing dev_stop() but this does not | |
3186 | * inform upper layers of the transistion. | |
3187 | */ | |
3188 | static void sky2_detach(struct net_device *dev) | |
3189 | { | |
3190 | if (netif_running(dev)) { | |
c36531b9 | 3191 | netif_tx_lock(dev); |
af18d8b8 | 3192 | netif_device_detach(dev); /* stop txq */ |
c36531b9 | 3193 | netif_tx_unlock(dev); |
af18d8b8 SH |
3194 | sky2_down(dev); |
3195 | } | |
3196 | } | |
3197 | ||
3198 | /* Bring device back after doing sky2_detach */ | |
3199 | static int sky2_reattach(struct net_device *dev) | |
3200 | { | |
3201 | int err = 0; | |
3202 | ||
3203 | if (netif_running(dev)) { | |
3204 | err = sky2_up(dev); | |
3205 | if (err) { | |
3206 | printk(KERN_INFO PFX "%s: could not restart %d\n", | |
3207 | dev->name, err); | |
3208 | dev_close(dev); | |
3209 | } else { | |
3210 | netif_device_attach(dev); | |
3211 | sky2_set_multicast(dev); | |
3212 | } | |
3213 | } | |
3214 | ||
3215 | return err; | |
3216 | } | |
3217 | ||
81906791 SH |
3218 | static void sky2_restart(struct work_struct *work) |
3219 | { | |
3220 | struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work); | |
af18d8b8 | 3221 | int i; |
81906791 | 3222 | |
81906791 | 3223 | rtnl_lock(); |
af18d8b8 SH |
3224 | for (i = 0; i < hw->ports; i++) |
3225 | sky2_detach(hw->dev[i]); | |
81906791 | 3226 | |
8cfcbe99 SH |
3227 | napi_disable(&hw->napi); |
3228 | sky2_write32(hw, B0_IMSK, 0); | |
81906791 SH |
3229 | sky2_reset(hw); |
3230 | sky2_write32(hw, B0_IMSK, Y2_IS_BASE); | |
6de16237 | 3231 | napi_enable(&hw->napi); |
81906791 | 3232 | |
af18d8b8 SH |
3233 | for (i = 0; i < hw->ports; i++) |
3234 | sky2_reattach(hw->dev[i]); | |
81906791 | 3235 | |
81906791 SH |
3236 | rtnl_unlock(); |
3237 | } | |
3238 | ||
e3173832 SH |
3239 | static inline u8 sky2_wol_supported(const struct sky2_hw *hw) |
3240 | { | |
3241 | return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0; | |
3242 | } | |
3243 | ||
2ca4231d MM |
3244 | static void sky2_hw_set_wol(struct sky2_hw *hw) |
3245 | { | |
3246 | int wol = 0; | |
3247 | int i; | |
3248 | ||
3249 | for (i = 0; i < hw->ports; i++) { | |
3250 | struct net_device *dev = hw->dev[i]; | |
3251 | struct sky2_port *sky2 = netdev_priv(dev); | |
3252 | ||
3253 | if (sky2->wol) | |
3254 | wol = 1; | |
3255 | } | |
3256 | ||
3257 | if (hw->chip_id == CHIP_ID_YUKON_EC_U || | |
3258 | hw->chip_id == CHIP_ID_YUKON_EX || | |
3259 | hw->chip_id == CHIP_ID_YUKON_FE_P) | |
3260 | sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); | |
3261 | ||
3262 | device_set_wakeup_enable(&hw->pdev->dev, wol); | |
3263 | } | |
3264 | ||
e3173832 SH |
3265 | static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
3266 | { | |
3267 | const struct sky2_port *sky2 = netdev_priv(dev); | |
3268 | ||
3269 | wol->supported = sky2_wol_supported(sky2->hw); | |
3270 | wol->wolopts = sky2->wol; | |
3271 | } | |
3272 | ||
3273 | static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | |
3274 | { | |
3275 | struct sky2_port *sky2 = netdev_priv(dev); | |
3276 | struct sky2_hw *hw = sky2->hw; | |
cd28ab6a | 3277 | |
8e95a202 JP |
3278 | if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) || |
3279 | !device_can_wakeup(&hw->pdev->dev)) | |
e3173832 SH |
3280 | return -EOPNOTSUPP; |
3281 | ||
3282 | sky2->wol = wol->wolopts; | |
3283 | ||
2ca4231d | 3284 | sky2_hw_set_wol(hw); |
9d731d77 | 3285 | |
e3173832 SH |
3286 | if (!netif_running(dev)) |
3287 | sky2_wol_init(sky2); | |
cd28ab6a SH |
3288 | return 0; |
3289 | } | |
3290 | ||
28bd181a | 3291 | static u32 sky2_supported_modes(const struct sky2_hw *hw) |
cd28ab6a | 3292 | { |
b89165f2 SH |
3293 | if (sky2_is_copper(hw)) { |
3294 | u32 modes = SUPPORTED_10baseT_Half | |
3295 | | SUPPORTED_10baseT_Full | |
3296 | | SUPPORTED_100baseT_Half | |
3297 | | SUPPORTED_100baseT_Full | |
3298 | | SUPPORTED_Autoneg | SUPPORTED_TP; | |
cd28ab6a | 3299 | |
ea76e635 | 3300 | if (hw->flags & SKY2_HW_GIGABIT) |
cd28ab6a | 3301 | modes |= SUPPORTED_1000baseT_Half |
b89165f2 SH |
3302 | | SUPPORTED_1000baseT_Full; |
3303 | return modes; | |
cd28ab6a | 3304 | } else |
b89165f2 SH |
3305 | return SUPPORTED_1000baseT_Half |
3306 | | SUPPORTED_1000baseT_Full | |
3307 | | SUPPORTED_Autoneg | |
3308 | | SUPPORTED_FIBRE; | |
cd28ab6a SH |
3309 | } |
3310 | ||
793b883e | 3311 | static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) |
cd28ab6a SH |
3312 | { |
3313 | struct sky2_port *sky2 = netdev_priv(dev); | |
3314 | struct sky2_hw *hw = sky2->hw; | |
3315 | ||
3316 | ecmd->transceiver = XCVR_INTERNAL; | |
3317 | ecmd->supported = sky2_supported_modes(hw); | |
3318 | ecmd->phy_address = PHY_ADDR_MARV; | |
b89165f2 | 3319 | if (sky2_is_copper(hw)) { |
cd28ab6a | 3320 | ecmd->port = PORT_TP; |
b89165f2 SH |
3321 | ecmd->speed = sky2->speed; |
3322 | } else { | |
3323 | ecmd->speed = SPEED_1000; | |
cd28ab6a | 3324 | ecmd->port = PORT_FIBRE; |
b89165f2 | 3325 | } |
cd28ab6a SH |
3326 | |
3327 | ecmd->advertising = sky2->advertising; | |
0ea065e5 SH |
3328 | ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED) |
3329 | ? AUTONEG_ENABLE : AUTONEG_DISABLE; | |
cd28ab6a SH |
3330 | ecmd->duplex = sky2->duplex; |
3331 | return 0; | |
3332 | } | |
3333 | ||
3334 | static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | |
3335 | { | |
3336 | struct sky2_port *sky2 = netdev_priv(dev); | |
3337 | const struct sky2_hw *hw = sky2->hw; | |
3338 | u32 supported = sky2_supported_modes(hw); | |
3339 | ||
3340 | if (ecmd->autoneg == AUTONEG_ENABLE) { | |
0ea065e5 | 3341 | sky2->flags |= SKY2_FLAG_AUTO_SPEED; |
cd28ab6a SH |
3342 | ecmd->advertising = supported; |
3343 | sky2->duplex = -1; | |
3344 | sky2->speed = -1; | |
3345 | } else { | |
3346 | u32 setting; | |
3347 | ||
793b883e | 3348 | switch (ecmd->speed) { |
cd28ab6a SH |
3349 | case SPEED_1000: |
3350 | if (ecmd->duplex == DUPLEX_FULL) | |
3351 | setting = SUPPORTED_1000baseT_Full; | |
3352 | else if (ecmd->duplex == DUPLEX_HALF) | |
3353 | setting = SUPPORTED_1000baseT_Half; | |
3354 | else | |
3355 | return -EINVAL; | |
3356 | break; | |
3357 | case SPEED_100: | |
3358 | if (ecmd->duplex == DUPLEX_FULL) | |
3359 | setting = SUPPORTED_100baseT_Full; | |
3360 | else if (ecmd->duplex == DUPLEX_HALF) | |
3361 | setting = SUPPORTED_100baseT_Half; | |
3362 | else | |
3363 | return -EINVAL; | |
3364 | break; | |
3365 | ||
3366 | case SPEED_10: | |
3367 | if (ecmd->duplex == DUPLEX_FULL) | |
3368 | setting = SUPPORTED_10baseT_Full; | |
3369 | else if (ecmd->duplex == DUPLEX_HALF) | |
3370 | setting = SUPPORTED_10baseT_Half; | |
3371 | else | |
3372 | return -EINVAL; | |
3373 | break; | |
3374 | default: | |
3375 | return -EINVAL; | |
3376 | } | |
3377 | ||
3378 | if ((setting & supported) == 0) | |
3379 | return -EINVAL; | |
3380 | ||
3381 | sky2->speed = ecmd->speed; | |
3382 | sky2->duplex = ecmd->duplex; | |
0ea065e5 | 3383 | sky2->flags &= ~SKY2_FLAG_AUTO_SPEED; |
cd28ab6a SH |
3384 | } |
3385 | ||
cd28ab6a SH |
3386 | sky2->advertising = ecmd->advertising; |
3387 | ||
d1b139c0 | 3388 | if (netif_running(dev)) { |
1b537565 | 3389 | sky2_phy_reinit(sky2); |
d1b139c0 SH |
3390 | sky2_set_multicast(dev); |
3391 | } | |
cd28ab6a SH |
3392 | |
3393 | return 0; | |
3394 | } | |
3395 | ||
3396 | static void sky2_get_drvinfo(struct net_device *dev, | |
3397 | struct ethtool_drvinfo *info) | |
3398 | { | |
3399 | struct sky2_port *sky2 = netdev_priv(dev); | |
3400 | ||
3401 | strcpy(info->driver, DRV_NAME); | |
3402 | strcpy(info->version, DRV_VERSION); | |
3403 | strcpy(info->fw_version, "N/A"); | |
3404 | strcpy(info->bus_info, pci_name(sky2->hw->pdev)); | |
3405 | } | |
3406 | ||
3407 | static const struct sky2_stat { | |
793b883e SH |
3408 | char name[ETH_GSTRING_LEN]; |
3409 | u16 offset; | |
cd28ab6a SH |
3410 | } sky2_stats[] = { |
3411 | { "tx_bytes", GM_TXO_OK_HI }, | |
3412 | { "rx_bytes", GM_RXO_OK_HI }, | |
3413 | { "tx_broadcast", GM_TXF_BC_OK }, | |
3414 | { "rx_broadcast", GM_RXF_BC_OK }, | |
3415 | { "tx_multicast", GM_TXF_MC_OK }, | |
3416 | { "rx_multicast", GM_RXF_MC_OK }, | |
3417 | { "tx_unicast", GM_TXF_UC_OK }, | |
3418 | { "rx_unicast", GM_RXF_UC_OK }, | |
3419 | { "tx_mac_pause", GM_TXF_MPAUSE }, | |
3420 | { "rx_mac_pause", GM_RXF_MPAUSE }, | |
eadfa7dd | 3421 | { "collisions", GM_TXF_COL }, |
cd28ab6a SH |
3422 | { "late_collision",GM_TXF_LAT_COL }, |
3423 | { "aborted", GM_TXF_ABO_COL }, | |
eadfa7dd | 3424 | { "single_collisions", GM_TXF_SNG_COL }, |
cd28ab6a | 3425 | { "multi_collisions", GM_TXF_MUL_COL }, |
eadfa7dd | 3426 | |
d2604540 | 3427 | { "rx_short", GM_RXF_SHT }, |
cd28ab6a | 3428 | { "rx_runt", GM_RXE_FRAG }, |
eadfa7dd SH |
3429 | { "rx_64_byte_packets", GM_RXF_64B }, |
3430 | { "rx_65_to_127_byte_packets", GM_RXF_127B }, | |
3431 | { "rx_128_to_255_byte_packets", GM_RXF_255B }, | |
3432 | { "rx_256_to_511_byte_packets", GM_RXF_511B }, | |
3433 | { "rx_512_to_1023_byte_packets", GM_RXF_1023B }, | |
3434 | { "rx_1024_to_1518_byte_packets", GM_RXF_1518B }, | |
3435 | { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ }, | |
cd28ab6a | 3436 | { "rx_too_long", GM_RXF_LNG_ERR }, |
eadfa7dd SH |
3437 | { "rx_fifo_overflow", GM_RXE_FIFO_OV }, |
3438 | { "rx_jabber", GM_RXF_JAB_PKT }, | |
cd28ab6a | 3439 | { "rx_fcs_error", GM_RXF_FCS_ERR }, |
eadfa7dd SH |
3440 | |
3441 | { "tx_64_byte_packets", GM_TXF_64B }, | |
3442 | { "tx_65_to_127_byte_packets", GM_TXF_127B }, | |
3443 | { "tx_128_to_255_byte_packets", GM_TXF_255B }, | |
3444 | { "tx_256_to_511_byte_packets", GM_TXF_511B }, | |
3445 | { "tx_512_to_1023_byte_packets", GM_TXF_1023B }, | |
3446 | { "tx_1024_to_1518_byte_packets", GM_TXF_1518B }, | |
3447 | { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ }, | |
3448 | { "tx_fifo_underrun", GM_TXE_FIFO_UR }, | |
cd28ab6a SH |
3449 | }; |
3450 | ||
cd28ab6a SH |
3451 | static u32 sky2_get_rx_csum(struct net_device *dev) |
3452 | { | |
3453 | struct sky2_port *sky2 = netdev_priv(dev); | |
3454 | ||
0ea065e5 | 3455 | return !!(sky2->flags & SKY2_FLAG_RX_CHECKSUM); |
cd28ab6a SH |
3456 | } |
3457 | ||
3458 | static int sky2_set_rx_csum(struct net_device *dev, u32 data) | |
3459 | { | |
3460 | struct sky2_port *sky2 = netdev_priv(dev); | |
3461 | ||
0ea065e5 SH |
3462 | if (data) |
3463 | sky2->flags |= SKY2_FLAG_RX_CHECKSUM; | |
3464 | else | |
3465 | sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM; | |
793b883e | 3466 | |
cd28ab6a SH |
3467 | sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), |
3468 | data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); | |
3469 | ||
3470 | return 0; | |
3471 | } | |
3472 | ||
3473 | static u32 sky2_get_msglevel(struct net_device *netdev) | |
3474 | { | |
3475 | struct sky2_port *sky2 = netdev_priv(netdev); | |
3476 | return sky2->msg_enable; | |
3477 | } | |
3478 | ||
9a7ae0a9 SH |
3479 | static int sky2_nway_reset(struct net_device *dev) |
3480 | { | |
3481 | struct sky2_port *sky2 = netdev_priv(dev); | |
9a7ae0a9 | 3482 | |
0ea065e5 | 3483 | if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED)) |
9a7ae0a9 SH |
3484 | return -EINVAL; |
3485 | ||
1b537565 | 3486 | sky2_phy_reinit(sky2); |
d1b139c0 | 3487 | sky2_set_multicast(dev); |
9a7ae0a9 SH |
3488 | |
3489 | return 0; | |
3490 | } | |
3491 | ||
793b883e | 3492 | static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count) |
cd28ab6a SH |
3493 | { |
3494 | struct sky2_hw *hw = sky2->hw; | |
3495 | unsigned port = sky2->port; | |
3496 | int i; | |
3497 | ||
3498 | data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32 | |
793b883e | 3499 | | (u64) gma_read32(hw, port, GM_TXO_OK_LO); |
cd28ab6a | 3500 | data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32 |
793b883e | 3501 | | (u64) gma_read32(hw, port, GM_RXO_OK_LO); |
cd28ab6a | 3502 | |
793b883e | 3503 | for (i = 2; i < count; i++) |
cd28ab6a SH |
3504 | data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset); |
3505 | } | |
3506 | ||
cd28ab6a SH |
3507 | static void sky2_set_msglevel(struct net_device *netdev, u32 value) |
3508 | { | |
3509 | struct sky2_port *sky2 = netdev_priv(netdev); | |
3510 | sky2->msg_enable = value; | |
3511 | } | |
3512 | ||
b9f2c044 | 3513 | static int sky2_get_sset_count(struct net_device *dev, int sset) |
cd28ab6a | 3514 | { |
b9f2c044 JG |
3515 | switch (sset) { |
3516 | case ETH_SS_STATS: | |
3517 | return ARRAY_SIZE(sky2_stats); | |
3518 | default: | |
3519 | return -EOPNOTSUPP; | |
3520 | } | |
cd28ab6a SH |
3521 | } |
3522 | ||
3523 | static void sky2_get_ethtool_stats(struct net_device *dev, | |
793b883e | 3524 | struct ethtool_stats *stats, u64 * data) |
cd28ab6a SH |
3525 | { |
3526 | struct sky2_port *sky2 = netdev_priv(dev); | |
3527 | ||
793b883e | 3528 | sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats)); |
cd28ab6a SH |
3529 | } |
3530 | ||
793b883e | 3531 | static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data) |
cd28ab6a SH |
3532 | { |
3533 | int i; | |
3534 | ||
3535 | switch (stringset) { | |
3536 | case ETH_SS_STATS: | |
3537 | for (i = 0; i < ARRAY_SIZE(sky2_stats); i++) | |
3538 | memcpy(data + i * ETH_GSTRING_LEN, | |
3539 | sky2_stats[i].name, ETH_GSTRING_LEN); | |
3540 | break; | |
3541 | } | |
3542 | } | |
3543 | ||
cd28ab6a SH |
3544 | static int sky2_set_mac_address(struct net_device *dev, void *p) |
3545 | { | |
3546 | struct sky2_port *sky2 = netdev_priv(dev); | |
a8ab1ec0 SH |
3547 | struct sky2_hw *hw = sky2->hw; |
3548 | unsigned port = sky2->port; | |
3549 | const struct sockaddr *addr = p; | |
cd28ab6a SH |
3550 | |
3551 | if (!is_valid_ether_addr(addr->sa_data)) | |
3552 | return -EADDRNOTAVAIL; | |
3553 | ||
cd28ab6a | 3554 | memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
a8ab1ec0 | 3555 | memcpy_toio(hw->regs + B2_MAC_1 + port * 8, |
cd28ab6a | 3556 | dev->dev_addr, ETH_ALEN); |
a8ab1ec0 | 3557 | memcpy_toio(hw->regs + B2_MAC_2 + port * 8, |
cd28ab6a | 3558 | dev->dev_addr, ETH_ALEN); |
1b537565 | 3559 | |
a8ab1ec0 SH |
3560 | /* virtual address for data */ |
3561 | gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr); | |
3562 | ||
3563 | /* physical address: used for pause frames */ | |
3564 | gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr); | |
1b537565 SH |
3565 | |
3566 | return 0; | |
cd28ab6a SH |
3567 | } |
3568 | ||
a052b52f SH |
3569 | static void inline sky2_add_filter(u8 filter[8], const u8 *addr) |
3570 | { | |
3571 | u32 bit; | |
3572 | ||
3573 | bit = ether_crc(ETH_ALEN, addr) & 63; | |
3574 | filter[bit >> 3] |= 1 << (bit & 7); | |
3575 | } | |
3576 | ||
cd28ab6a SH |
3577 | static void sky2_set_multicast(struct net_device *dev) |
3578 | { | |
3579 | struct sky2_port *sky2 = netdev_priv(dev); | |
3580 | struct sky2_hw *hw = sky2->hw; | |
3581 | unsigned port = sky2->port; | |
3582 | struct dev_mc_list *list = dev->mc_list; | |
3583 | u16 reg; | |
3584 | u8 filter[8]; | |
a052b52f SH |
3585 | int rx_pause; |
3586 | static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 }; | |
cd28ab6a | 3587 | |
a052b52f | 3588 | rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH); |
cd28ab6a SH |
3589 | memset(filter, 0, sizeof(filter)); |
3590 | ||
3591 | reg = gma_read16(hw, port, GM_RX_CTRL); | |
3592 | reg |= GM_RXCR_UCF_ENA; | |
3593 | ||
d571b694 | 3594 | if (dev->flags & IFF_PROMISC) /* promiscuous */ |
cd28ab6a | 3595 | reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); |
a052b52f | 3596 | else if (dev->flags & IFF_ALLMULTI) |
cd28ab6a | 3597 | memset(filter, 0xff, sizeof(filter)); |
a052b52f | 3598 | else if (dev->mc_count == 0 && !rx_pause) |
cd28ab6a SH |
3599 | reg &= ~GM_RXCR_MCF_ENA; |
3600 | else { | |
3601 | int i; | |
3602 | reg |= GM_RXCR_MCF_ENA; | |
3603 | ||
a052b52f SH |
3604 | if (rx_pause) |
3605 | sky2_add_filter(filter, pause_mc_addr); | |
3606 | ||
3607 | for (i = 0; list && i < dev->mc_count; i++, list = list->next) | |
3608 | sky2_add_filter(filter, list->dmi_addr); | |
cd28ab6a SH |
3609 | } |
3610 | ||
cd28ab6a | 3611 | gma_write16(hw, port, GM_MC_ADDR_H1, |
793b883e | 3612 | (u16) filter[0] | ((u16) filter[1] << 8)); |
cd28ab6a | 3613 | gma_write16(hw, port, GM_MC_ADDR_H2, |
793b883e | 3614 | (u16) filter[2] | ((u16) filter[3] << 8)); |
cd28ab6a | 3615 | gma_write16(hw, port, GM_MC_ADDR_H3, |
793b883e | 3616 | (u16) filter[4] | ((u16) filter[5] << 8)); |
cd28ab6a | 3617 | gma_write16(hw, port, GM_MC_ADDR_H4, |
793b883e | 3618 | (u16) filter[6] | ((u16) filter[7] << 8)); |
cd28ab6a SH |
3619 | |
3620 | gma_write16(hw, port, GM_RX_CTRL, reg); | |
3621 | } | |
3622 | ||
3623 | /* Can have one global because blinking is controlled by | |
3624 | * ethtool and that is always under RTNL mutex | |
3625 | */ | |
a84d0a3d | 3626 | static void sky2_led(struct sky2_port *sky2, enum led_mode mode) |
cd28ab6a | 3627 | { |
a84d0a3d SH |
3628 | struct sky2_hw *hw = sky2->hw; |
3629 | unsigned port = sky2->port; | |
793b883e | 3630 | |
a84d0a3d SH |
3631 | spin_lock_bh(&sky2->phy_lock); |
3632 | if (hw->chip_id == CHIP_ID_YUKON_EC_U || | |
3633 | hw->chip_id == CHIP_ID_YUKON_EX || | |
3634 | hw->chip_id == CHIP_ID_YUKON_SUPR) { | |
3635 | u16 pg; | |
793b883e SH |
3636 | pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); |
3637 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); | |
793b883e | 3638 | |
a84d0a3d SH |
3639 | switch (mode) { |
3640 | case MO_LED_OFF: | |
3641 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
3642 | PHY_M_LEDC_LOS_CTRL(8) | | |
3643 | PHY_M_LEDC_INIT_CTRL(8) | | |
3644 | PHY_M_LEDC_STA1_CTRL(8) | | |
3645 | PHY_M_LEDC_STA0_CTRL(8)); | |
3646 | break; | |
3647 | case MO_LED_ON: | |
3648 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
3649 | PHY_M_LEDC_LOS_CTRL(9) | | |
3650 | PHY_M_LEDC_INIT_CTRL(9) | | |
3651 | PHY_M_LEDC_STA1_CTRL(9) | | |
3652 | PHY_M_LEDC_STA0_CTRL(9)); | |
3653 | break; | |
3654 | case MO_LED_BLINK: | |
3655 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
3656 | PHY_M_LEDC_LOS_CTRL(0xa) | | |
3657 | PHY_M_LEDC_INIT_CTRL(0xa) | | |
3658 | PHY_M_LEDC_STA1_CTRL(0xa) | | |
3659 | PHY_M_LEDC_STA0_CTRL(0xa)); | |
3660 | break; | |
3661 | case MO_LED_NORM: | |
3662 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
3663 | PHY_M_LEDC_LOS_CTRL(1) | | |
3664 | PHY_M_LEDC_INIT_CTRL(8) | | |
3665 | PHY_M_LEDC_STA1_CTRL(7) | | |
3666 | PHY_M_LEDC_STA0_CTRL(7)); | |
3667 | } | |
793b883e | 3668 | |
a84d0a3d SH |
3669 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); |
3670 | } else | |
7d2e3cb7 | 3671 | gm_phy_write(hw, port, PHY_MARV_LED_OVER, |
a84d0a3d SH |
3672 | PHY_M_LED_MO_DUP(mode) | |
3673 | PHY_M_LED_MO_10(mode) | | |
3674 | PHY_M_LED_MO_100(mode) | | |
3675 | PHY_M_LED_MO_1000(mode) | | |
3676 | PHY_M_LED_MO_RX(mode) | | |
3677 | PHY_M_LED_MO_TX(mode)); | |
3678 | ||
3679 | spin_unlock_bh(&sky2->phy_lock); | |
cd28ab6a SH |
3680 | } |
3681 | ||
3682 | /* blink LED's for finding board */ | |
3683 | static int sky2_phys_id(struct net_device *dev, u32 data) | |
3684 | { | |
3685 | struct sky2_port *sky2 = netdev_priv(dev); | |
a84d0a3d | 3686 | unsigned int i; |
cd28ab6a | 3687 | |
a84d0a3d SH |
3688 | if (data == 0) |
3689 | data = UINT_MAX; | |
cd28ab6a | 3690 | |
a84d0a3d SH |
3691 | for (i = 0; i < data; i++) { |
3692 | sky2_led(sky2, MO_LED_ON); | |
3693 | if (msleep_interruptible(500)) | |
3694 | break; | |
3695 | sky2_led(sky2, MO_LED_OFF); | |
3696 | if (msleep_interruptible(500)) | |
3697 | break; | |
793b883e | 3698 | } |
a84d0a3d | 3699 | sky2_led(sky2, MO_LED_NORM); |
cd28ab6a SH |
3700 | |
3701 | return 0; | |
3702 | } | |
3703 | ||
3704 | static void sky2_get_pauseparam(struct net_device *dev, | |
3705 | struct ethtool_pauseparam *ecmd) | |
3706 | { | |
3707 | struct sky2_port *sky2 = netdev_priv(dev); | |
3708 | ||
16ad91e1 SH |
3709 | switch (sky2->flow_mode) { |
3710 | case FC_NONE: | |
3711 | ecmd->tx_pause = ecmd->rx_pause = 0; | |
3712 | break; | |
3713 | case FC_TX: | |
3714 | ecmd->tx_pause = 1, ecmd->rx_pause = 0; | |
3715 | break; | |
3716 | case FC_RX: | |
3717 | ecmd->tx_pause = 0, ecmd->rx_pause = 1; | |
3718 | break; | |
3719 | case FC_BOTH: | |
3720 | ecmd->tx_pause = ecmd->rx_pause = 1; | |
3721 | } | |
3722 | ||
0ea065e5 SH |
3723 | ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE) |
3724 | ? AUTONEG_ENABLE : AUTONEG_DISABLE; | |
cd28ab6a SH |
3725 | } |
3726 | ||
3727 | static int sky2_set_pauseparam(struct net_device *dev, | |
3728 | struct ethtool_pauseparam *ecmd) | |
3729 | { | |
3730 | struct sky2_port *sky2 = netdev_priv(dev); | |
cd28ab6a | 3731 | |
0ea065e5 SH |
3732 | if (ecmd->autoneg == AUTONEG_ENABLE) |
3733 | sky2->flags |= SKY2_FLAG_AUTO_PAUSE; | |
3734 | else | |
3735 | sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE; | |
3736 | ||
16ad91e1 | 3737 | sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause); |
cd28ab6a | 3738 | |
16ad91e1 SH |
3739 | if (netif_running(dev)) |
3740 | sky2_phy_reinit(sky2); | |
cd28ab6a | 3741 | |
2eaba1a2 | 3742 | return 0; |
cd28ab6a SH |
3743 | } |
3744 | ||
fb17358f SH |
3745 | static int sky2_get_coalesce(struct net_device *dev, |
3746 | struct ethtool_coalesce *ecmd) | |
3747 | { | |
3748 | struct sky2_port *sky2 = netdev_priv(dev); | |
3749 | struct sky2_hw *hw = sky2->hw; | |
3750 | ||
3751 | if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP) | |
3752 | ecmd->tx_coalesce_usecs = 0; | |
3753 | else { | |
3754 | u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI); | |
3755 | ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks); | |
3756 | } | |
3757 | ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH); | |
3758 | ||
3759 | if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP) | |
3760 | ecmd->rx_coalesce_usecs = 0; | |
3761 | else { | |
3762 | u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI); | |
3763 | ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks); | |
3764 | } | |
3765 | ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM); | |
3766 | ||
3767 | if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP) | |
3768 | ecmd->rx_coalesce_usecs_irq = 0; | |
3769 | else { | |
3770 | u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI); | |
3771 | ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks); | |
3772 | } | |
3773 | ||
3774 | ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM); | |
3775 | ||
3776 | return 0; | |
3777 | } | |
3778 | ||
3779 | /* Note: this affect both ports */ | |
3780 | static int sky2_set_coalesce(struct net_device *dev, | |
3781 | struct ethtool_coalesce *ecmd) | |
3782 | { | |
3783 | struct sky2_port *sky2 = netdev_priv(dev); | |
3784 | struct sky2_hw *hw = sky2->hw; | |
77b3d6a2 | 3785 | const u32 tmax = sky2_clk2us(hw, 0x0ffffff); |
fb17358f | 3786 | |
77b3d6a2 SH |
3787 | if (ecmd->tx_coalesce_usecs > tmax || |
3788 | ecmd->rx_coalesce_usecs > tmax || | |
3789 | ecmd->rx_coalesce_usecs_irq > tmax) | |
fb17358f SH |
3790 | return -EINVAL; |
3791 | ||
ee5f68fe | 3792 | if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1) |
fb17358f | 3793 | return -EINVAL; |
ff81fbbe | 3794 | if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING) |
fb17358f | 3795 | return -EINVAL; |
ff81fbbe | 3796 | if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING) |
fb17358f SH |
3797 | return -EINVAL; |
3798 | ||
3799 | if (ecmd->tx_coalesce_usecs == 0) | |
3800 | sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); | |
3801 | else { | |
3802 | sky2_write32(hw, STAT_TX_TIMER_INI, | |
3803 | sky2_us2clk(hw, ecmd->tx_coalesce_usecs)); | |
3804 | sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); | |
3805 | } | |
3806 | sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames); | |
3807 | ||
3808 | if (ecmd->rx_coalesce_usecs == 0) | |
3809 | sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP); | |
3810 | else { | |
3811 | sky2_write32(hw, STAT_LEV_TIMER_INI, | |
3812 | sky2_us2clk(hw, ecmd->rx_coalesce_usecs)); | |
3813 | sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); | |
3814 | } | |
3815 | sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames); | |
3816 | ||
3817 | if (ecmd->rx_coalesce_usecs_irq == 0) | |
3818 | sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP); | |
3819 | else { | |
d28d4870 | 3820 | sky2_write32(hw, STAT_ISR_TIMER_INI, |
fb17358f SH |
3821 | sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq)); |
3822 | sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); | |
3823 | } | |
3824 | sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq); | |
3825 | return 0; | |
3826 | } | |
3827 | ||
793b883e SH |
3828 | static void sky2_get_ringparam(struct net_device *dev, |
3829 | struct ethtool_ringparam *ering) | |
3830 | { | |
3831 | struct sky2_port *sky2 = netdev_priv(dev); | |
3832 | ||
3833 | ering->rx_max_pending = RX_MAX_PENDING; | |
3834 | ering->rx_mini_max_pending = 0; | |
3835 | ering->rx_jumbo_max_pending = 0; | |
ee5f68fe | 3836 | ering->tx_max_pending = TX_MAX_PENDING; |
793b883e SH |
3837 | |
3838 | ering->rx_pending = sky2->rx_pending; | |
3839 | ering->rx_mini_pending = 0; | |
3840 | ering->rx_jumbo_pending = 0; | |
3841 | ering->tx_pending = sky2->tx_pending; | |
3842 | } | |
3843 | ||
3844 | static int sky2_set_ringparam(struct net_device *dev, | |
3845 | struct ethtool_ringparam *ering) | |
3846 | { | |
3847 | struct sky2_port *sky2 = netdev_priv(dev); | |
793b883e SH |
3848 | |
3849 | if (ering->rx_pending > RX_MAX_PENDING || | |
3850 | ering->rx_pending < 8 || | |
ee5f68fe SH |
3851 | ering->tx_pending < TX_MIN_PENDING || |
3852 | ering->tx_pending > TX_MAX_PENDING) | |
793b883e SH |
3853 | return -EINVAL; |
3854 | ||
af18d8b8 | 3855 | sky2_detach(dev); |
793b883e SH |
3856 | |
3857 | sky2->rx_pending = ering->rx_pending; | |
3858 | sky2->tx_pending = ering->tx_pending; | |
ee5f68fe | 3859 | sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1); |
793b883e | 3860 | |
af18d8b8 | 3861 | return sky2_reattach(dev); |
793b883e SH |
3862 | } |
3863 | ||
793b883e SH |
3864 | static int sky2_get_regs_len(struct net_device *dev) |
3865 | { | |
6e4cbb34 | 3866 | return 0x4000; |
793b883e SH |
3867 | } |
3868 | ||
c32bbff8 MM |
3869 | static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b) |
3870 | { | |
3871 | /* This complicated switch statement is to make sure and | |
3872 | * only access regions that are unreserved. | |
3873 | * Some blocks are only valid on dual port cards. | |
3874 | */ | |
3875 | switch (b) { | |
3876 | /* second port */ | |
3877 | case 5: /* Tx Arbiter 2 */ | |
3878 | case 9: /* RX2 */ | |
3879 | case 14 ... 15: /* TX2 */ | |
3880 | case 17: case 19: /* Ram Buffer 2 */ | |
3881 | case 22 ... 23: /* Tx Ram Buffer 2 */ | |
3882 | case 25: /* Rx MAC Fifo 1 */ | |
3883 | case 27: /* Tx MAC Fifo 2 */ | |
3884 | case 31: /* GPHY 2 */ | |
3885 | case 40 ... 47: /* Pattern Ram 2 */ | |
3886 | case 52: case 54: /* TCP Segmentation 2 */ | |
3887 | case 112 ... 116: /* GMAC 2 */ | |
3888 | return hw->ports > 1; | |
3889 | ||
3890 | case 0: /* Control */ | |
3891 | case 2: /* Mac address */ | |
3892 | case 4: /* Tx Arbiter 1 */ | |
3893 | case 7: /* PCI express reg */ | |
3894 | case 8: /* RX1 */ | |
3895 | case 12 ... 13: /* TX1 */ | |
3896 | case 16: case 18:/* Rx Ram Buffer 1 */ | |
3897 | case 20 ... 21: /* Tx Ram Buffer 1 */ | |
3898 | case 24: /* Rx MAC Fifo 1 */ | |
3899 | case 26: /* Tx MAC Fifo 1 */ | |
3900 | case 28 ... 29: /* Descriptor and status unit */ | |
3901 | case 30: /* GPHY 1*/ | |
3902 | case 32 ... 39: /* Pattern Ram 1 */ | |
3903 | case 48: case 50: /* TCP Segmentation 1 */ | |
3904 | case 56 ... 60: /* PCI space */ | |
3905 | case 80 ... 84: /* GMAC 1 */ | |
3906 | return 1; | |
3907 | ||
3908 | default: | |
3909 | return 0; | |
3910 | } | |
3911 | } | |
3912 | ||
793b883e SH |
3913 | /* |
3914 | * Returns copy of control register region | |
3ead5db7 | 3915 | * Note: ethtool_get_regs always provides full size (16k) buffer |
793b883e SH |
3916 | */ |
3917 | static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs, | |
3918 | void *p) | |
3919 | { | |
3920 | const struct sky2_port *sky2 = netdev_priv(dev); | |
793b883e | 3921 | const void __iomem *io = sky2->hw->regs; |
295b54c4 | 3922 | unsigned int b; |
793b883e SH |
3923 | |
3924 | regs->version = 1; | |
793b883e | 3925 | |
295b54c4 | 3926 | for (b = 0; b < 128; b++) { |
c32bbff8 MM |
3927 | /* skip poisonous diagnostic ram region in block 3 */ |
3928 | if (b == 3) | |
295b54c4 | 3929 | memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10); |
c32bbff8 | 3930 | else if (sky2_reg_access_ok(sky2->hw, b)) |
295b54c4 | 3931 | memcpy_fromio(p, io, 128); |
c32bbff8 | 3932 | else |
295b54c4 | 3933 | memset(p, 0, 128); |
3ead5db7 | 3934 | |
295b54c4 SH |
3935 | p += 128; |
3936 | io += 128; | |
3937 | } | |
793b883e | 3938 | } |
cd28ab6a | 3939 | |
b628ed98 SH |
3940 | /* In order to do Jumbo packets on these chips, need to turn off the |
3941 | * transmit store/forward. Therefore checksum offload won't work. | |
3942 | */ | |
3943 | static int no_tx_offload(struct net_device *dev) | |
3944 | { | |
3945 | const struct sky2_port *sky2 = netdev_priv(dev); | |
3946 | const struct sky2_hw *hw = sky2->hw; | |
3947 | ||
69161611 | 3948 | return dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U; |
b628ed98 SH |
3949 | } |
3950 | ||
3951 | static int sky2_set_tx_csum(struct net_device *dev, u32 data) | |
3952 | { | |
3953 | if (data && no_tx_offload(dev)) | |
3954 | return -EINVAL; | |
3955 | ||
3956 | return ethtool_op_set_tx_csum(dev, data); | |
3957 | } | |
3958 | ||
3959 | ||
3960 | static int sky2_set_tso(struct net_device *dev, u32 data) | |
3961 | { | |
3962 | if (data && no_tx_offload(dev)) | |
3963 | return -EINVAL; | |
3964 | ||
3965 | return ethtool_op_set_tso(dev, data); | |
3966 | } | |
3967 | ||
f4331a6d SH |
3968 | static int sky2_get_eeprom_len(struct net_device *dev) |
3969 | { | |
3970 | struct sky2_port *sky2 = netdev_priv(dev); | |
b32f40c4 | 3971 | struct sky2_hw *hw = sky2->hw; |
f4331a6d SH |
3972 | u16 reg2; |
3973 | ||
b32f40c4 | 3974 | reg2 = sky2_pci_read16(hw, PCI_DEV_REG2); |
f4331a6d SH |
3975 | return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8); |
3976 | } | |
3977 | ||
1413235c | 3978 | static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy) |
f4331a6d | 3979 | { |
1413235c | 3980 | unsigned long start = jiffies; |
f4331a6d | 3981 | |
1413235c SH |
3982 | while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) { |
3983 | /* Can take up to 10.6 ms for write */ | |
3984 | if (time_after(jiffies, start + HZ/4)) { | |
3985 | dev_err(&hw->pdev->dev, PFX "VPD cycle timed out"); | |
3986 | return -ETIMEDOUT; | |
3987 | } | |
3988 | mdelay(1); | |
3989 | } | |
167f53d0 | 3990 | |
1413235c SH |
3991 | return 0; |
3992 | } | |
167f53d0 | 3993 | |
1413235c SH |
3994 | static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data, |
3995 | u16 offset, size_t length) | |
3996 | { | |
3997 | int rc = 0; | |
3998 | ||
3999 | while (length > 0) { | |
4000 | u32 val; | |
4001 | ||
4002 | sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset); | |
4003 | rc = sky2_vpd_wait(hw, cap, 0); | |
4004 | if (rc) | |
4005 | break; | |
4006 | ||
4007 | val = sky2_pci_read32(hw, cap + PCI_VPD_DATA); | |
4008 | ||
4009 | memcpy(data, &val, min(sizeof(val), length)); | |
4010 | offset += sizeof(u32); | |
4011 | data += sizeof(u32); | |
4012 | length -= sizeof(u32); | |
4013 | } | |
4014 | ||
4015 | return rc; | |
f4331a6d SH |
4016 | } |
4017 | ||
1413235c SH |
4018 | static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data, |
4019 | u16 offset, unsigned int length) | |
f4331a6d | 4020 | { |
1413235c SH |
4021 | unsigned int i; |
4022 | int rc = 0; | |
4023 | ||
4024 | for (i = 0; i < length; i += sizeof(u32)) { | |
4025 | u32 val = *(u32 *)(data + i); | |
4026 | ||
4027 | sky2_pci_write32(hw, cap + PCI_VPD_DATA, val); | |
4028 | sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F); | |
4029 | ||
4030 | rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F); | |
4031 | if (rc) | |
4032 | break; | |
4033 | } | |
4034 | return rc; | |
f4331a6d SH |
4035 | } |
4036 | ||
4037 | static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, | |
4038 | u8 *data) | |
4039 | { | |
4040 | struct sky2_port *sky2 = netdev_priv(dev); | |
4041 | int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD); | |
f4331a6d SH |
4042 | |
4043 | if (!cap) | |
4044 | return -EINVAL; | |
4045 | ||
4046 | eeprom->magic = SKY2_EEPROM_MAGIC; | |
4047 | ||
1413235c | 4048 | return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len); |
f4331a6d SH |
4049 | } |
4050 | ||
4051 | static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, | |
4052 | u8 *data) | |
4053 | { | |
4054 | struct sky2_port *sky2 = netdev_priv(dev); | |
4055 | int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD); | |
f4331a6d SH |
4056 | |
4057 | if (!cap) | |
4058 | return -EINVAL; | |
4059 | ||
4060 | if (eeprom->magic != SKY2_EEPROM_MAGIC) | |
4061 | return -EINVAL; | |
4062 | ||
1413235c SH |
4063 | /* Partial writes not supported */ |
4064 | if ((eeprom->offset & 3) || (eeprom->len & 3)) | |
4065 | return -EINVAL; | |
f4331a6d | 4066 | |
1413235c | 4067 | return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len); |
f4331a6d SH |
4068 | } |
4069 | ||
4070 | ||
7282d491 | 4071 | static const struct ethtool_ops sky2_ethtool_ops = { |
f4331a6d SH |
4072 | .get_settings = sky2_get_settings, |
4073 | .set_settings = sky2_set_settings, | |
4074 | .get_drvinfo = sky2_get_drvinfo, | |
4075 | .get_wol = sky2_get_wol, | |
4076 | .set_wol = sky2_set_wol, | |
4077 | .get_msglevel = sky2_get_msglevel, | |
4078 | .set_msglevel = sky2_set_msglevel, | |
4079 | .nway_reset = sky2_nway_reset, | |
4080 | .get_regs_len = sky2_get_regs_len, | |
4081 | .get_regs = sky2_get_regs, | |
4082 | .get_link = ethtool_op_get_link, | |
4083 | .get_eeprom_len = sky2_get_eeprom_len, | |
4084 | .get_eeprom = sky2_get_eeprom, | |
4085 | .set_eeprom = sky2_set_eeprom, | |
f4331a6d | 4086 | .set_sg = ethtool_op_set_sg, |
f4331a6d | 4087 | .set_tx_csum = sky2_set_tx_csum, |
f4331a6d SH |
4088 | .set_tso = sky2_set_tso, |
4089 | .get_rx_csum = sky2_get_rx_csum, | |
4090 | .set_rx_csum = sky2_set_rx_csum, | |
4091 | .get_strings = sky2_get_strings, | |
4092 | .get_coalesce = sky2_get_coalesce, | |
4093 | .set_coalesce = sky2_set_coalesce, | |
4094 | .get_ringparam = sky2_get_ringparam, | |
4095 | .set_ringparam = sky2_set_ringparam, | |
cd28ab6a SH |
4096 | .get_pauseparam = sky2_get_pauseparam, |
4097 | .set_pauseparam = sky2_set_pauseparam, | |
f4331a6d | 4098 | .phys_id = sky2_phys_id, |
b9f2c044 | 4099 | .get_sset_count = sky2_get_sset_count, |
cd28ab6a SH |
4100 | .get_ethtool_stats = sky2_get_ethtool_stats, |
4101 | }; | |
4102 | ||
3cf26753 SH |
4103 | #ifdef CONFIG_SKY2_DEBUG |
4104 | ||
4105 | static struct dentry *sky2_debug; | |
4106 | ||
e4c2abe2 SH |
4107 | |
4108 | /* | |
4109 | * Read and parse the first part of Vital Product Data | |
4110 | */ | |
4111 | #define VPD_SIZE 128 | |
4112 | #define VPD_MAGIC 0x82 | |
4113 | ||
4114 | static const struct vpd_tag { | |
4115 | char tag[2]; | |
4116 | char *label; | |
4117 | } vpd_tags[] = { | |
4118 | { "PN", "Part Number" }, | |
4119 | { "EC", "Engineering Level" }, | |
4120 | { "MN", "Manufacturer" }, | |
4121 | { "SN", "Serial Number" }, | |
4122 | { "YA", "Asset Tag" }, | |
4123 | { "VL", "First Error Log Message" }, | |
4124 | { "VF", "Second Error Log Message" }, | |
4125 | { "VB", "Boot Agent ROM Configuration" }, | |
4126 | { "VE", "EFI UNDI Configuration" }, | |
4127 | }; | |
4128 | ||
4129 | static void sky2_show_vpd(struct seq_file *seq, struct sky2_hw *hw) | |
4130 | { | |
4131 | size_t vpd_size; | |
4132 | loff_t offs; | |
4133 | u8 len; | |
4134 | unsigned char *buf; | |
4135 | u16 reg2; | |
4136 | ||
4137 | reg2 = sky2_pci_read16(hw, PCI_DEV_REG2); | |
4138 | vpd_size = 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8); | |
4139 | ||
4140 | seq_printf(seq, "%s Product Data\n", pci_name(hw->pdev)); | |
4141 | buf = kmalloc(vpd_size, GFP_KERNEL); | |
4142 | if (!buf) { | |
4143 | seq_puts(seq, "no memory!\n"); | |
4144 | return; | |
4145 | } | |
4146 | ||
4147 | if (pci_read_vpd(hw->pdev, 0, vpd_size, buf) < 0) { | |
4148 | seq_puts(seq, "VPD read failed\n"); | |
4149 | goto out; | |
4150 | } | |
4151 | ||
4152 | if (buf[0] != VPD_MAGIC) { | |
4153 | seq_printf(seq, "VPD tag mismatch: %#x\n", buf[0]); | |
4154 | goto out; | |
4155 | } | |
4156 | len = buf[1]; | |
4157 | if (len == 0 || len > vpd_size - 4) { | |
4158 | seq_printf(seq, "Invalid id length: %d\n", len); | |
4159 | goto out; | |
4160 | } | |
4161 | ||
4162 | seq_printf(seq, "%.*s\n", len, buf + 3); | |
4163 | offs = len + 3; | |
4164 | ||
4165 | while (offs < vpd_size - 4) { | |
4166 | int i; | |
4167 | ||
4168 | if (!memcmp("RW", buf + offs, 2)) /* end marker */ | |
4169 | break; | |
4170 | len = buf[offs + 2]; | |
4171 | if (offs + len + 3 >= vpd_size) | |
4172 | break; | |
4173 | ||
4174 | for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) { | |
4175 | if (!memcmp(vpd_tags[i].tag, buf + offs, 2)) { | |
4176 | seq_printf(seq, " %s: %.*s\n", | |
4177 | vpd_tags[i].label, len, buf + offs + 3); | |
4178 | break; | |
4179 | } | |
4180 | } | |
4181 | offs += len + 3; | |
4182 | } | |
4183 | out: | |
4184 | kfree(buf); | |
4185 | } | |
4186 | ||
3cf26753 SH |
4187 | static int sky2_debug_show(struct seq_file *seq, void *v) |
4188 | { | |
4189 | struct net_device *dev = seq->private; | |
4190 | const struct sky2_port *sky2 = netdev_priv(dev); | |
bea3348e | 4191 | struct sky2_hw *hw = sky2->hw; |
3cf26753 SH |
4192 | unsigned port = sky2->port; |
4193 | unsigned idx, last; | |
4194 | int sop; | |
4195 | ||
e4c2abe2 | 4196 | sky2_show_vpd(seq, hw); |
3cf26753 | 4197 | |
e4c2abe2 | 4198 | seq_printf(seq, "\nIRQ src=%x mask=%x control=%x\n", |
3cf26753 SH |
4199 | sky2_read32(hw, B0_ISRC), |
4200 | sky2_read32(hw, B0_IMSK), | |
4201 | sky2_read32(hw, B0_Y2_SP_ICR)); | |
4202 | ||
e4c2abe2 SH |
4203 | if (!netif_running(dev)) { |
4204 | seq_printf(seq, "network not running\n"); | |
4205 | return 0; | |
4206 | } | |
4207 | ||
bea3348e | 4208 | napi_disable(&hw->napi); |
3cf26753 SH |
4209 | last = sky2_read16(hw, STAT_PUT_IDX); |
4210 | ||
4211 | if (hw->st_idx == last) | |
4212 | seq_puts(seq, "Status ring (empty)\n"); | |
4213 | else { | |
4214 | seq_puts(seq, "Status ring\n"); | |
4215 | for (idx = hw->st_idx; idx != last && idx < STATUS_RING_SIZE; | |
4216 | idx = RING_NEXT(idx, STATUS_RING_SIZE)) { | |
4217 | const struct sky2_status_le *le = hw->st_le + idx; | |
4218 | seq_printf(seq, "[%d] %#x %d %#x\n", | |
4219 | idx, le->opcode, le->length, le->status); | |
4220 | } | |
4221 | seq_puts(seq, "\n"); | |
4222 | } | |
4223 | ||
4224 | seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n", | |
4225 | sky2->tx_cons, sky2->tx_prod, | |
4226 | sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX), | |
4227 | sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE))); | |
4228 | ||
4229 | /* Dump contents of tx ring */ | |
4230 | sop = 1; | |
ee5f68fe SH |
4231 | for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; |
4232 | idx = RING_NEXT(idx, sky2->tx_ring_size)) { | |
3cf26753 SH |
4233 | const struct sky2_tx_le *le = sky2->tx_le + idx; |
4234 | u32 a = le32_to_cpu(le->addr); | |
4235 | ||
4236 | if (sop) | |
4237 | seq_printf(seq, "%u:", idx); | |
4238 | sop = 0; | |
4239 | ||
4240 | switch(le->opcode & ~HW_OWNER) { | |
4241 | case OP_ADDR64: | |
4242 | seq_printf(seq, " %#x:", a); | |
4243 | break; | |
4244 | case OP_LRGLEN: | |
4245 | seq_printf(seq, " mtu=%d", a); | |
4246 | break; | |
4247 | case OP_VLAN: | |
4248 | seq_printf(seq, " vlan=%d", be16_to_cpu(le->length)); | |
4249 | break; | |
4250 | case OP_TCPLISW: | |
4251 | seq_printf(seq, " csum=%#x", a); | |
4252 | break; | |
4253 | case OP_LARGESEND: | |
4254 | seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length)); | |
4255 | break; | |
4256 | case OP_PACKET: | |
4257 | seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length)); | |
4258 | break; | |
4259 | case OP_BUFFER: | |
4260 | seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length)); | |
4261 | break; | |
4262 | default: | |
4263 | seq_printf(seq, " op=%#x,%#x(%d)", le->opcode, | |
4264 | a, le16_to_cpu(le->length)); | |
4265 | } | |
4266 | ||
4267 | if (le->ctrl & EOP) { | |
4268 | seq_putc(seq, '\n'); | |
4269 | sop = 1; | |
4270 | } | |
4271 | } | |
4272 | ||
4273 | seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n", | |
4274 | sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)), | |
c409c34b | 4275 | sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)), |
3cf26753 SH |
4276 | sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX))); |
4277 | ||
d1d08d12 | 4278 | sky2_read32(hw, B0_Y2_SP_LISR); |
bea3348e | 4279 | napi_enable(&hw->napi); |
3cf26753 SH |
4280 | return 0; |
4281 | } | |
4282 | ||
4283 | static int sky2_debug_open(struct inode *inode, struct file *file) | |
4284 | { | |
4285 | return single_open(file, sky2_debug_show, inode->i_private); | |
4286 | } | |
4287 | ||
4288 | static const struct file_operations sky2_debug_fops = { | |
4289 | .owner = THIS_MODULE, | |
4290 | .open = sky2_debug_open, | |
4291 | .read = seq_read, | |
4292 | .llseek = seq_lseek, | |
4293 | .release = single_release, | |
4294 | }; | |
4295 | ||
4296 | /* | |
4297 | * Use network device events to create/remove/rename | |
4298 | * debugfs file entries | |
4299 | */ | |
4300 | static int sky2_device_event(struct notifier_block *unused, | |
4301 | unsigned long event, void *ptr) | |
4302 | { | |
4303 | struct net_device *dev = ptr; | |
5b296bc9 | 4304 | struct sky2_port *sky2 = netdev_priv(dev); |
3cf26753 | 4305 | |
1436b301 | 4306 | if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug) |
5b296bc9 | 4307 | return NOTIFY_DONE; |
3cf26753 | 4308 | |
5b296bc9 SH |
4309 | switch(event) { |
4310 | case NETDEV_CHANGENAME: | |
4311 | if (sky2->debugfs) { | |
4312 | sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs, | |
4313 | sky2_debug, dev->name); | |
4314 | } | |
4315 | break; | |
3cf26753 | 4316 | |
5b296bc9 SH |
4317 | case NETDEV_GOING_DOWN: |
4318 | if (sky2->debugfs) { | |
4319 | printk(KERN_DEBUG PFX "%s: remove debugfs\n", | |
4320 | dev->name); | |
4321 | debugfs_remove(sky2->debugfs); | |
4322 | sky2->debugfs = NULL; | |
3cf26753 | 4323 | } |
5b296bc9 SH |
4324 | break; |
4325 | ||
4326 | case NETDEV_UP: | |
4327 | sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO, | |
4328 | sky2_debug, dev, | |
4329 | &sky2_debug_fops); | |
4330 | if (IS_ERR(sky2->debugfs)) | |
4331 | sky2->debugfs = NULL; | |
3cf26753 SH |
4332 | } |
4333 | ||
4334 | return NOTIFY_DONE; | |
4335 | } | |
4336 | ||
4337 | static struct notifier_block sky2_notifier = { | |
4338 | .notifier_call = sky2_device_event, | |
4339 | }; | |
4340 | ||
4341 | ||
4342 | static __init void sky2_debug_init(void) | |
4343 | { | |
4344 | struct dentry *ent; | |
4345 | ||
4346 | ent = debugfs_create_dir("sky2", NULL); | |
4347 | if (!ent || IS_ERR(ent)) | |
4348 | return; | |
4349 | ||
4350 | sky2_debug = ent; | |
4351 | register_netdevice_notifier(&sky2_notifier); | |
4352 | } | |
4353 | ||
4354 | static __exit void sky2_debug_cleanup(void) | |
4355 | { | |
4356 | if (sky2_debug) { | |
4357 | unregister_netdevice_notifier(&sky2_notifier); | |
4358 | debugfs_remove(sky2_debug); | |
4359 | sky2_debug = NULL; | |
4360 | } | |
4361 | } | |
4362 | ||
4363 | #else | |
4364 | #define sky2_debug_init() | |
4365 | #define sky2_debug_cleanup() | |
4366 | #endif | |
4367 | ||
1436b301 SH |
4368 | /* Two copies of network device operations to handle special case of |
4369 | not allowing netpoll on second port */ | |
4370 | static const struct net_device_ops sky2_netdev_ops[2] = { | |
4371 | { | |
4372 | .ndo_open = sky2_up, | |
4373 | .ndo_stop = sky2_down, | |
00829823 | 4374 | .ndo_start_xmit = sky2_xmit_frame, |
1436b301 SH |
4375 | .ndo_do_ioctl = sky2_ioctl, |
4376 | .ndo_validate_addr = eth_validate_addr, | |
4377 | .ndo_set_mac_address = sky2_set_mac_address, | |
4378 | .ndo_set_multicast_list = sky2_set_multicast, | |
4379 | .ndo_change_mtu = sky2_change_mtu, | |
4380 | .ndo_tx_timeout = sky2_tx_timeout, | |
4381 | #ifdef SKY2_VLAN_TAG_USED | |
4382 | .ndo_vlan_rx_register = sky2_vlan_rx_register, | |
4383 | #endif | |
4384 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
4385 | .ndo_poll_controller = sky2_netpoll, | |
4386 | #endif | |
4387 | }, | |
4388 | { | |
4389 | .ndo_open = sky2_up, | |
4390 | .ndo_stop = sky2_down, | |
00829823 | 4391 | .ndo_start_xmit = sky2_xmit_frame, |
1436b301 SH |
4392 | .ndo_do_ioctl = sky2_ioctl, |
4393 | .ndo_validate_addr = eth_validate_addr, | |
4394 | .ndo_set_mac_address = sky2_set_mac_address, | |
4395 | .ndo_set_multicast_list = sky2_set_multicast, | |
4396 | .ndo_change_mtu = sky2_change_mtu, | |
4397 | .ndo_tx_timeout = sky2_tx_timeout, | |
4398 | #ifdef SKY2_VLAN_TAG_USED | |
4399 | .ndo_vlan_rx_register = sky2_vlan_rx_register, | |
4400 | #endif | |
4401 | }, | |
4402 | }; | |
3cf26753 | 4403 | |
cd28ab6a SH |
4404 | /* Initialize network device */ |
4405 | static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, | |
e3173832 | 4406 | unsigned port, |
be63a21c | 4407 | int highmem, int wol) |
cd28ab6a SH |
4408 | { |
4409 | struct sky2_port *sky2; | |
4410 | struct net_device *dev = alloc_etherdev(sizeof(*sky2)); | |
4411 | ||
4412 | if (!dev) { | |
898eb71c | 4413 | dev_err(&hw->pdev->dev, "etherdev alloc failed\n"); |
cd28ab6a SH |
4414 | return NULL; |
4415 | } | |
4416 | ||
cd28ab6a | 4417 | SET_NETDEV_DEV(dev, &hw->pdev->dev); |
ef743d33 | 4418 | dev->irq = hw->pdev->irq; |
cd28ab6a | 4419 | SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops); |
cd28ab6a | 4420 | dev->watchdog_timeo = TX_WATCHDOG; |
1436b301 | 4421 | dev->netdev_ops = &sky2_netdev_ops[port]; |
cd28ab6a SH |
4422 | |
4423 | sky2 = netdev_priv(dev); | |
4424 | sky2->netdev = dev; | |
4425 | sky2->hw = hw; | |
4426 | sky2->msg_enable = netif_msg_init(debug, default_msg); | |
4427 | ||
cd28ab6a | 4428 | /* Auto speed and flow control */ |
0ea065e5 SH |
4429 | sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE; |
4430 | if (hw->chip_id != CHIP_ID_YUKON_XL) | |
4431 | sky2->flags |= SKY2_FLAG_RX_CHECKSUM; | |
4432 | ||
16ad91e1 SH |
4433 | sky2->flow_mode = FC_BOTH; |
4434 | ||
cd28ab6a SH |
4435 | sky2->duplex = -1; |
4436 | sky2->speed = -1; | |
4437 | sky2->advertising = sky2_supported_modes(hw); | |
be63a21c | 4438 | sky2->wol = wol; |
75d070c5 | 4439 | |
e07b1aa8 | 4440 | spin_lock_init(&sky2->phy_lock); |
ee5f68fe | 4441 | |
793b883e | 4442 | sky2->tx_pending = TX_DEF_PENDING; |
ee5f68fe | 4443 | sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1); |
290d4de5 | 4444 | sky2->rx_pending = RX_DEF_PENDING; |
cd28ab6a SH |
4445 | |
4446 | hw->dev[port] = dev; | |
4447 | ||
4448 | sky2->port = port; | |
4449 | ||
4a50a876 | 4450 | dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG; |
cd28ab6a SH |
4451 | if (highmem) |
4452 | dev->features |= NETIF_F_HIGHDMA; | |
cd28ab6a | 4453 | |
d1f13708 | 4454 | #ifdef SKY2_VLAN_TAG_USED |
d6c9bc1e SH |
4455 | /* The workaround for FE+ status conflicts with VLAN tag detection. */ |
4456 | if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && | |
4457 | sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) { | |
4458 | dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; | |
d6c9bc1e | 4459 | } |
d1f13708 | 4460 | #endif |
4461 | ||
cd28ab6a | 4462 | /* read the mac address */ |
793b883e | 4463 | memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); |
2995bfb7 | 4464 | memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
cd28ab6a | 4465 | |
cd28ab6a SH |
4466 | return dev; |
4467 | } | |
4468 | ||
28bd181a | 4469 | static void __devinit sky2_show_addr(struct net_device *dev) |
cd28ab6a SH |
4470 | { |
4471 | const struct sky2_port *sky2 = netdev_priv(dev); | |
4472 | ||
4473 | if (netif_msg_probe(sky2)) | |
e174961c JB |
4474 | printk(KERN_INFO PFX "%s: addr %pM\n", |
4475 | dev->name, dev->dev_addr); | |
cd28ab6a SH |
4476 | } |
4477 | ||
fb2690a9 | 4478 | /* Handle software interrupt used during MSI test */ |
7d12e780 | 4479 | static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id) |
fb2690a9 SH |
4480 | { |
4481 | struct sky2_hw *hw = dev_id; | |
4482 | u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2); | |
4483 | ||
4484 | if (status == 0) | |
4485 | return IRQ_NONE; | |
4486 | ||
4487 | if (status & Y2_IS_IRQ_SW) { | |
ea76e635 | 4488 | hw->flags |= SKY2_HW_USE_MSI; |
fb2690a9 SH |
4489 | wake_up(&hw->msi_wait); |
4490 | sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); | |
4491 | } | |
4492 | sky2_write32(hw, B0_Y2_SP_ICR, 2); | |
4493 | ||
4494 | return IRQ_HANDLED; | |
4495 | } | |
4496 | ||
4497 | /* Test interrupt path by forcing a a software IRQ */ | |
4498 | static int __devinit sky2_test_msi(struct sky2_hw *hw) | |
4499 | { | |
4500 | struct pci_dev *pdev = hw->pdev; | |
4501 | int err; | |
4502 | ||
bb507fe1 | 4503 | init_waitqueue_head (&hw->msi_wait); |
4504 | ||
fb2690a9 SH |
4505 | sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); |
4506 | ||
b0a20ded | 4507 | err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw); |
fb2690a9 | 4508 | if (err) { |
b02a9258 | 4509 | dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); |
fb2690a9 SH |
4510 | return err; |
4511 | } | |
4512 | ||
fb2690a9 | 4513 | sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); |
bb507fe1 | 4514 | sky2_read8(hw, B0_CTST); |
fb2690a9 | 4515 | |
ea76e635 | 4516 | wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10); |
fb2690a9 | 4517 | |
ea76e635 | 4518 | if (!(hw->flags & SKY2_HW_USE_MSI)) { |
fb2690a9 | 4519 | /* MSI test failed, go back to INTx mode */ |
b02a9258 SH |
4520 | dev_info(&pdev->dev, "No interrupt generated using MSI, " |
4521 | "switching to INTx mode.\n"); | |
fb2690a9 SH |
4522 | |
4523 | err = -EOPNOTSUPP; | |
4524 | sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); | |
4525 | } | |
4526 | ||
4527 | sky2_write32(hw, B0_IMSK, 0); | |
2bffc23a | 4528 | sky2_read32(hw, B0_IMSK); |
fb2690a9 SH |
4529 | |
4530 | free_irq(pdev->irq, hw); | |
4531 | ||
4532 | return err; | |
4533 | } | |
4534 | ||
c7127a34 SH |
4535 | /* This driver supports yukon2 chipset only */ |
4536 | static const char *sky2_name(u8 chipid, char *buf, int sz) | |
4537 | { | |
4538 | const char *name[] = { | |
4539 | "XL", /* 0xb3 */ | |
4540 | "EC Ultra", /* 0xb4 */ | |
4541 | "Extreme", /* 0xb5 */ | |
4542 | "EC", /* 0xb6 */ | |
4543 | "FE", /* 0xb7 */ | |
4544 | "FE+", /* 0xb8 */ | |
4545 | "Supreme", /* 0xb9 */ | |
0ce8b98d | 4546 | "UL 2", /* 0xba */ |
0f5aac70 SH |
4547 | "Unknown", /* 0xbb */ |
4548 | "Optima", /* 0xbc */ | |
c7127a34 SH |
4549 | }; |
4550 | ||
dae3a511 | 4551 | if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OPT) |
c7127a34 SH |
4552 | strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz); |
4553 | else | |
4554 | snprintf(buf, sz, "(chip %#x)", chipid); | |
4555 | return buf; | |
4556 | } | |
4557 | ||
cd28ab6a SH |
4558 | static int __devinit sky2_probe(struct pci_dev *pdev, |
4559 | const struct pci_device_id *ent) | |
4560 | { | |
7f60c64b | 4561 | struct net_device *dev; |
cd28ab6a | 4562 | struct sky2_hw *hw; |
be63a21c | 4563 | int err, using_dac = 0, wol_default; |
3834507d | 4564 | u32 reg; |
c7127a34 | 4565 | char buf1[16]; |
cd28ab6a | 4566 | |
793b883e SH |
4567 | err = pci_enable_device(pdev); |
4568 | if (err) { | |
b02a9258 | 4569 | dev_err(&pdev->dev, "cannot enable PCI device\n"); |
cd28ab6a SH |
4570 | goto err_out; |
4571 | } | |
4572 | ||
6cc90a5a SH |
4573 | /* Get configuration information |
4574 | * Note: only regular PCI config access once to test for HW issues | |
4575 | * other PCI access through shared memory for speed and to | |
4576 | * avoid MMCONFIG problems. | |
4577 | */ | |
4578 | err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®); | |
4579 | if (err) { | |
4580 | dev_err(&pdev->dev, "PCI read config failed\n"); | |
4581 | goto err_out; | |
4582 | } | |
4583 | ||
4584 | if (~reg == 0) { | |
4585 | dev_err(&pdev->dev, "PCI configuration read error\n"); | |
4586 | goto err_out; | |
4587 | } | |
4588 | ||
793b883e SH |
4589 | err = pci_request_regions(pdev, DRV_NAME); |
4590 | if (err) { | |
b02a9258 | 4591 | dev_err(&pdev->dev, "cannot obtain PCI resources\n"); |
44a1d2e5 | 4592 | goto err_out_disable; |
cd28ab6a SH |
4593 | } |
4594 | ||
4595 | pci_set_master(pdev); | |
4596 | ||
d1f3d4dd | 4597 | if (sizeof(dma_addr_t) > sizeof(u32) && |
6a35528a | 4598 | !(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))) { |
d1f3d4dd | 4599 | using_dac = 1; |
6a35528a | 4600 | err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); |
d1f3d4dd | 4601 | if (err < 0) { |
b02a9258 SH |
4602 | dev_err(&pdev->dev, "unable to obtain 64 bit DMA " |
4603 | "for consistent allocations\n"); | |
d1f3d4dd SH |
4604 | goto err_out_free_regions; |
4605 | } | |
d1f3d4dd | 4606 | } else { |
284901a9 | 4607 | err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
cd28ab6a | 4608 | if (err) { |
b02a9258 | 4609 | dev_err(&pdev->dev, "no usable DMA configuration\n"); |
cd28ab6a SH |
4610 | goto err_out_free_regions; |
4611 | } | |
4612 | } | |
d1f3d4dd | 4613 | |
3834507d SH |
4614 | |
4615 | #ifdef __BIG_ENDIAN | |
4616 | /* The sk98lin vendor driver uses hardware byte swapping but | |
4617 | * this driver uses software swapping. | |
4618 | */ | |
4619 | reg &= ~PCI_REV_DESC; | |
4620 | err = pci_write_config_dword(pdev,PCI_DEV_REG2, reg); | |
4621 | if (err) { | |
4622 | dev_err(&pdev->dev, "PCI write config failed\n"); | |
4623 | goto err_out_free_regions; | |
4624 | } | |
4625 | #endif | |
4626 | ||
9d731d77 | 4627 | wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0; |
be63a21c | 4628 | |
cd28ab6a | 4629 | err = -ENOMEM; |
66466797 SH |
4630 | |
4631 | hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") | |
4632 | + strlen(pci_name(pdev)) + 1, GFP_KERNEL); | |
cd28ab6a | 4633 | if (!hw) { |
b02a9258 | 4634 | dev_err(&pdev->dev, "cannot allocate hardware struct\n"); |
cd28ab6a SH |
4635 | goto err_out_free_regions; |
4636 | } | |
4637 | ||
cd28ab6a | 4638 | hw->pdev = pdev; |
66466797 | 4639 | sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); |
cd28ab6a SH |
4640 | |
4641 | hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); | |
4642 | if (!hw->regs) { | |
b02a9258 | 4643 | dev_err(&pdev->dev, "cannot map device registers\n"); |
cd28ab6a SH |
4644 | goto err_out_free_hw; |
4645 | } | |
4646 | ||
08c06d8a | 4647 | /* ring for status responses */ |
167f53d0 | 4648 | hw->st_le = pci_alloc_consistent(pdev, STATUS_LE_BYTES, &hw->st_dma); |
08c06d8a SH |
4649 | if (!hw->st_le) |
4650 | goto err_out_iounmap; | |
4651 | ||
e3173832 | 4652 | err = sky2_init(hw); |
cd28ab6a | 4653 | if (err) |
793b883e | 4654 | goto err_out_iounmap; |
cd28ab6a | 4655 | |
c844d483 SH |
4656 | dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n", |
4657 | sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev); | |
cd28ab6a | 4658 | |
e3173832 SH |
4659 | sky2_reset(hw); |
4660 | ||
be63a21c | 4661 | dev = sky2_init_netdev(hw, 0, using_dac, wol_default); |
7f60c64b | 4662 | if (!dev) { |
4663 | err = -ENOMEM; | |
cd28ab6a | 4664 | goto err_out_free_pci; |
7f60c64b | 4665 | } |
cd28ab6a | 4666 | |
9fa1b1f3 SH |
4667 | if (!disable_msi && pci_enable_msi(pdev) == 0) { |
4668 | err = sky2_test_msi(hw); | |
4669 | if (err == -EOPNOTSUPP) | |
4670 | pci_disable_msi(pdev); | |
4671 | else if (err) | |
4672 | goto err_out_free_netdev; | |
4673 | } | |
4674 | ||
793b883e SH |
4675 | err = register_netdev(dev); |
4676 | if (err) { | |
b02a9258 | 4677 | dev_err(&pdev->dev, "cannot register net device\n"); |
cd28ab6a SH |
4678 | goto err_out_free_netdev; |
4679 | } | |
4680 | ||
33cb7d33 BP |
4681 | netif_carrier_off(dev); |
4682 | ||
6de16237 SH |
4683 | netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT); |
4684 | ||
ea76e635 SH |
4685 | err = request_irq(pdev->irq, sky2_intr, |
4686 | (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, | |
66466797 | 4687 | hw->irq_name, hw); |
9fa1b1f3 | 4688 | if (err) { |
b02a9258 | 4689 | dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); |
9fa1b1f3 SH |
4690 | goto err_out_unregister; |
4691 | } | |
4692 | sky2_write32(hw, B0_IMSK, Y2_IS_BASE); | |
6de16237 | 4693 | napi_enable(&hw->napi); |
9fa1b1f3 | 4694 | |
cd28ab6a SH |
4695 | sky2_show_addr(dev); |
4696 | ||
7f60c64b | 4697 | if (hw->ports > 1) { |
4698 | struct net_device *dev1; | |
4699 | ||
ca519274 | 4700 | err = -ENOMEM; |
be63a21c | 4701 | dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default); |
ca519274 SH |
4702 | if (dev1 && (err = register_netdev(dev1)) == 0) |
4703 | sky2_show_addr(dev1); | |
4704 | else { | |
b02a9258 SH |
4705 | dev_warn(&pdev->dev, |
4706 | "register of second port failed (%d)\n", err); | |
cd28ab6a | 4707 | hw->dev[1] = NULL; |
ca519274 SH |
4708 | hw->ports = 1; |
4709 | if (dev1) | |
4710 | free_netdev(dev1); | |
4711 | } | |
cd28ab6a SH |
4712 | } |
4713 | ||
32c2c300 | 4714 | setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw); |
81906791 SH |
4715 | INIT_WORK(&hw->restart_work, sky2_restart); |
4716 | ||
793b883e | 4717 | pci_set_drvdata(pdev, hw); |
1ae861e6 | 4718 | pdev->d3_delay = 150; |
793b883e | 4719 | |
cd28ab6a SH |
4720 | return 0; |
4721 | ||
793b883e | 4722 | err_out_unregister: |
ea76e635 | 4723 | if (hw->flags & SKY2_HW_USE_MSI) |
b0a20ded | 4724 | pci_disable_msi(pdev); |
793b883e | 4725 | unregister_netdev(dev); |
cd28ab6a SH |
4726 | err_out_free_netdev: |
4727 | free_netdev(dev); | |
cd28ab6a | 4728 | err_out_free_pci: |
793b883e | 4729 | sky2_write8(hw, B0_CTST, CS_RST_SET); |
167f53d0 | 4730 | pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); |
cd28ab6a SH |
4731 | err_out_iounmap: |
4732 | iounmap(hw->regs); | |
4733 | err_out_free_hw: | |
4734 | kfree(hw); | |
4735 | err_out_free_regions: | |
4736 | pci_release_regions(pdev); | |
44a1d2e5 | 4737 | err_out_disable: |
cd28ab6a | 4738 | pci_disable_device(pdev); |
cd28ab6a | 4739 | err_out: |
549a68c3 | 4740 | pci_set_drvdata(pdev, NULL); |
cd28ab6a SH |
4741 | return err; |
4742 | } | |
4743 | ||
4744 | static void __devexit sky2_remove(struct pci_dev *pdev) | |
4745 | { | |
793b883e | 4746 | struct sky2_hw *hw = pci_get_drvdata(pdev); |
6de16237 | 4747 | int i; |
cd28ab6a | 4748 | |
793b883e | 4749 | if (!hw) |
cd28ab6a SH |
4750 | return; |
4751 | ||
32c2c300 | 4752 | del_timer_sync(&hw->watchdog_timer); |
6de16237 | 4753 | cancel_work_sync(&hw->restart_work); |
d27ed387 | 4754 | |
b877fe28 | 4755 | for (i = hw->ports-1; i >= 0; --i) |
6de16237 | 4756 | unregister_netdev(hw->dev[i]); |
81906791 | 4757 | |
d27ed387 | 4758 | sky2_write32(hw, B0_IMSK, 0); |
cd28ab6a | 4759 | |
ae306cca SH |
4760 | sky2_power_aux(hw); |
4761 | ||
793b883e | 4762 | sky2_write8(hw, B0_CTST, CS_RST_SET); |
5afa0a9c | 4763 | sky2_read8(hw, B0_CTST); |
cd28ab6a SH |
4764 | |
4765 | free_irq(pdev->irq, hw); | |
ea76e635 | 4766 | if (hw->flags & SKY2_HW_USE_MSI) |
b0a20ded | 4767 | pci_disable_msi(pdev); |
793b883e | 4768 | pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); |
cd28ab6a SH |
4769 | pci_release_regions(pdev); |
4770 | pci_disable_device(pdev); | |
793b883e | 4771 | |
b877fe28 | 4772 | for (i = hw->ports-1; i >= 0; --i) |
6de16237 SH |
4773 | free_netdev(hw->dev[i]); |
4774 | ||
cd28ab6a SH |
4775 | iounmap(hw->regs); |
4776 | kfree(hw); | |
5afa0a9c | 4777 | |
cd28ab6a SH |
4778 | pci_set_drvdata(pdev, NULL); |
4779 | } | |
4780 | ||
4781 | #ifdef CONFIG_PM | |
4782 | static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) | |
4783 | { | |
793b883e | 4784 | struct sky2_hw *hw = pci_get_drvdata(pdev); |
e3173832 | 4785 | int i, wol = 0; |
cd28ab6a | 4786 | |
549a68c3 SH |
4787 | if (!hw) |
4788 | return 0; | |
4789 | ||
063a0b38 SH |
4790 | del_timer_sync(&hw->watchdog_timer); |
4791 | cancel_work_sync(&hw->restart_work); | |
4792 | ||
19720737 | 4793 | rtnl_lock(); |
f05267e7 | 4794 | for (i = 0; i < hw->ports; i++) { |
cd28ab6a | 4795 | struct net_device *dev = hw->dev[i]; |
e3173832 | 4796 | struct sky2_port *sky2 = netdev_priv(dev); |
cd28ab6a | 4797 | |
af18d8b8 | 4798 | sky2_detach(dev); |
e3173832 SH |
4799 | |
4800 | if (sky2->wol) | |
4801 | sky2_wol_init(sky2); | |
4802 | ||
4803 | wol |= sky2->wol; | |
cd28ab6a SH |
4804 | } |
4805 | ||
8ab8fca2 | 4806 | sky2_write32(hw, B0_IMSK, 0); |
6de16237 | 4807 | napi_disable(&hw->napi); |
ae306cca | 4808 | sky2_power_aux(hw); |
19720737 | 4809 | rtnl_unlock(); |
e3173832 | 4810 | |
d374c1c1 | 4811 | pci_save_state(pdev); |
e3173832 | 4812 | pci_enable_wake(pdev, pci_choose_state(pdev, state), wol); |
f71eb1a2 | 4813 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
ae306cca | 4814 | |
2ccc99b7 | 4815 | return 0; |
cd28ab6a SH |
4816 | } |
4817 | ||
4818 | static int sky2_resume(struct pci_dev *pdev) | |
4819 | { | |
793b883e | 4820 | struct sky2_hw *hw = pci_get_drvdata(pdev); |
08c06d8a | 4821 | int i, err; |
cd28ab6a | 4822 | |
549a68c3 SH |
4823 | if (!hw) |
4824 | return 0; | |
4825 | ||
f71eb1a2 SH |
4826 | err = pci_set_power_state(pdev, PCI_D0); |
4827 | if (err) | |
4828 | goto out; | |
ae306cca SH |
4829 | |
4830 | err = pci_restore_state(pdev); | |
4831 | if (err) | |
4832 | goto out; | |
4833 | ||
cd28ab6a | 4834 | pci_enable_wake(pdev, PCI_D0, 0); |
1ad5b4a5 SH |
4835 | |
4836 | /* Re-enable all clocks */ | |
05745c4a SH |
4837 | if (hw->chip_id == CHIP_ID_YUKON_EX || |
4838 | hw->chip_id == CHIP_ID_YUKON_EC_U || | |
4839 | hw->chip_id == CHIP_ID_YUKON_FE_P) | |
b32f40c4 | 4840 | sky2_pci_write32(hw, PCI_DEV_REG3, 0); |
1ad5b4a5 | 4841 | |
e3173832 | 4842 | sky2_reset(hw); |
8ab8fca2 | 4843 | sky2_write32(hw, B0_IMSK, Y2_IS_BASE); |
6de16237 | 4844 | napi_enable(&hw->napi); |
8ab8fca2 | 4845 | |
af18d8b8 | 4846 | rtnl_lock(); |
f05267e7 | 4847 | for (i = 0; i < hw->ports; i++) { |
af18d8b8 SH |
4848 | err = sky2_reattach(hw->dev[i]); |
4849 | if (err) | |
4850 | goto out; | |
cd28ab6a | 4851 | } |
af18d8b8 | 4852 | rtnl_unlock(); |
eb35cf60 | 4853 | |
ae306cca | 4854 | return 0; |
08c06d8a | 4855 | out: |
af18d8b8 SH |
4856 | rtnl_unlock(); |
4857 | ||
b02a9258 | 4858 | dev_err(&pdev->dev, "resume failed (%d)\n", err); |
ae306cca | 4859 | pci_disable_device(pdev); |
08c06d8a | 4860 | return err; |
cd28ab6a SH |
4861 | } |
4862 | #endif | |
4863 | ||
e3173832 SH |
4864 | static void sky2_shutdown(struct pci_dev *pdev) |
4865 | { | |
4866 | struct sky2_hw *hw = pci_get_drvdata(pdev); | |
4867 | int i, wol = 0; | |
4868 | ||
549a68c3 SH |
4869 | if (!hw) |
4870 | return; | |
4871 | ||
19720737 | 4872 | rtnl_lock(); |
5c0d6b34 | 4873 | del_timer_sync(&hw->watchdog_timer); |
e3173832 SH |
4874 | |
4875 | for (i = 0; i < hw->ports; i++) { | |
4876 | struct net_device *dev = hw->dev[i]; | |
4877 | struct sky2_port *sky2 = netdev_priv(dev); | |
4878 | ||
4879 | if (sky2->wol) { | |
4880 | wol = 1; | |
4881 | sky2_wol_init(sky2); | |
4882 | } | |
4883 | } | |
4884 | ||
4885 | if (wol) | |
4886 | sky2_power_aux(hw); | |
19720737 | 4887 | rtnl_unlock(); |
e3173832 SH |
4888 | |
4889 | pci_enable_wake(pdev, PCI_D3hot, wol); | |
4890 | pci_enable_wake(pdev, PCI_D3cold, wol); | |
4891 | ||
4892 | pci_disable_device(pdev); | |
f71eb1a2 | 4893 | pci_set_power_state(pdev, PCI_D3hot); |
e3173832 SH |
4894 | } |
4895 | ||
cd28ab6a | 4896 | static struct pci_driver sky2_driver = { |
793b883e SH |
4897 | .name = DRV_NAME, |
4898 | .id_table = sky2_id_table, | |
4899 | .probe = sky2_probe, | |
4900 | .remove = __devexit_p(sky2_remove), | |
cd28ab6a | 4901 | #ifdef CONFIG_PM |
793b883e SH |
4902 | .suspend = sky2_suspend, |
4903 | .resume = sky2_resume, | |
cd28ab6a | 4904 | #endif |
e3173832 | 4905 | .shutdown = sky2_shutdown, |
cd28ab6a SH |
4906 | }; |
4907 | ||
4908 | static int __init sky2_init_module(void) | |
4909 | { | |
c844d483 SH |
4910 | pr_info(PFX "driver version " DRV_VERSION "\n"); |
4911 | ||
3cf26753 | 4912 | sky2_debug_init(); |
50241c4c | 4913 | return pci_register_driver(&sky2_driver); |
cd28ab6a SH |
4914 | } |
4915 | ||
4916 | static void __exit sky2_cleanup_module(void) | |
4917 | { | |
4918 | pci_unregister_driver(&sky2_driver); | |
3cf26753 | 4919 | sky2_debug_cleanup(); |
cd28ab6a SH |
4920 | } |
4921 | ||
4922 | module_init(sky2_init_module); | |
4923 | module_exit(sky2_cleanup_module); | |
4924 | ||
4925 | MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver"); | |
65ebe634 | 4926 | MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>"); |
cd28ab6a | 4927 | MODULE_LICENSE("GPL"); |
5f4f9dc1 | 4928 | MODULE_VERSION(DRV_VERSION); |