Commit | Line | Data |
---|---|---|
8ceee660 BH |
1 | /**************************************************************************** |
2 | * Driver for Solarflare Solarstorm network controllers and boards | |
3 | * Copyright 2005-2006 Fen Systems Ltd. | |
906bb26c | 4 | * Copyright 2006-2009 Solarflare Communications Inc. |
8ceee660 BH |
5 | * |
6 | * This program is free software; you can redistribute it and/or modify it | |
7 | * under the terms of the GNU General Public License version 2 as published | |
8 | * by the Free Software Foundation, incorporated herein by reference. | |
9 | */ | |
10 | ||
11 | #include <linux/bitops.h> | |
12 | #include <linux/delay.h> | |
13 | #include <linux/pci.h> | |
14 | #include <linux/module.h> | |
15 | #include <linux/seq_file.h> | |
37b5a603 | 16 | #include <linux/i2c.h> |
f31a45d2 | 17 | #include <linux/mii.h> |
5a0e3ad6 | 18 | #include <linux/slab.h> |
8ceee660 BH |
19 | #include "net_driver.h" |
20 | #include "bitfield.h" | |
21 | #include "efx.h" | |
22 | #include "mac.h" | |
8ceee660 | 23 | #include "spi.h" |
744093c9 | 24 | #include "nic.h" |
3e6c4538 | 25 | #include "regs.h" |
12d00cad | 26 | #include "io.h" |
8ceee660 BH |
27 | #include "mdio_10g.h" |
28 | #include "phy.h" | |
8ceee660 BH |
29 | #include "workarounds.h" |
30 | ||
8986352a | 31 | /* Hardware control for SFC4000 (aka Falcon). */ |
8ceee660 | 32 | |
2f7f5730 BH |
33 | static const unsigned int |
34 | /* "Large" EEPROM device: Atmel AT25640 or similar | |
35 | * 8 KB, 16-bit address, 32 B write block */ | |
36 | large_eeprom_type = ((13 << SPI_DEV_TYPE_SIZE_LBN) | |
37 | | (2 << SPI_DEV_TYPE_ADDR_LEN_LBN) | |
38 | | (5 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)), | |
39 | /* Default flash device: Atmel AT25F1024 | |
40 | * 128 KB, 24-bit address, 32 KB erase block, 256 B write block */ | |
41 | default_flash_type = ((17 << SPI_DEV_TYPE_SIZE_LBN) | |
42 | | (3 << SPI_DEV_TYPE_ADDR_LEN_LBN) | |
43 | | (0x52 << SPI_DEV_TYPE_ERASE_CMD_LBN) | |
44 | | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN) | |
45 | | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)); | |
46 | ||
8ceee660 BH |
47 | /************************************************************************** |
48 | * | |
49 | * I2C bus - this is a bit-bashing interface using GPIO pins | |
50 | * Note that it uses the output enables to tristate the outputs | |
51 | * SDA is the data pin and SCL is the clock | |
52 | * | |
53 | ************************************************************************** | |
54 | */ | |
37b5a603 | 55 | static void falcon_setsda(void *data, int state) |
8ceee660 | 56 | { |
37b5a603 | 57 | struct efx_nic *efx = (struct efx_nic *)data; |
8ceee660 BH |
58 | efx_oword_t reg; |
59 | ||
12d00cad | 60 | efx_reado(efx, ®, FR_AB_GPIO_CTL); |
3e6c4538 | 61 | EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN, !state); |
12d00cad | 62 | efx_writeo(efx, ®, FR_AB_GPIO_CTL); |
8ceee660 BH |
63 | } |
64 | ||
37b5a603 | 65 | static void falcon_setscl(void *data, int state) |
8ceee660 | 66 | { |
37b5a603 | 67 | struct efx_nic *efx = (struct efx_nic *)data; |
8ceee660 BH |
68 | efx_oword_t reg; |
69 | ||
12d00cad | 70 | efx_reado(efx, ®, FR_AB_GPIO_CTL); |
3e6c4538 | 71 | EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO0_OEN, !state); |
12d00cad | 72 | efx_writeo(efx, ®, FR_AB_GPIO_CTL); |
37b5a603 BH |
73 | } |
74 | ||
8e730c15 BH |
75 | static int falcon_getsda(void *data) |
76 | { | |
77 | struct efx_nic *efx = (struct efx_nic *)data; | |
78 | efx_oword_t reg; | |
8ceee660 | 79 | |
8e730c15 BH |
80 | efx_reado(efx, ®, FR_AB_GPIO_CTL); |
81 | return EFX_OWORD_FIELD(reg, FRF_AB_GPIO3_IN); | |
82 | } | |
8ceee660 | 83 | |
8e730c15 BH |
84 | static int falcon_getscl(void *data) |
85 | { | |
86 | struct efx_nic *efx = (struct efx_nic *)data; | |
87 | efx_oword_t reg; | |
8ceee660 | 88 | |
8e730c15 BH |
89 | efx_reado(efx, ®, FR_AB_GPIO_CTL); |
90 | return EFX_OWORD_FIELD(reg, FRF_AB_GPIO0_IN); | |
8ceee660 BH |
91 | } |
92 | ||
8e730c15 BH |
93 | static struct i2c_algo_bit_data falcon_i2c_bit_operations = { |
94 | .setsda = falcon_setsda, | |
95 | .setscl = falcon_setscl, | |
96 | .getsda = falcon_getsda, | |
97 | .getscl = falcon_getscl, | |
98 | .udelay = 5, | |
99 | /* Wait up to 50 ms for slave to let us pull SCL high */ | |
100 | .timeout = DIV_ROUND_UP(HZ, 20), | |
101 | }; | |
102 | ||
ef2b90ee | 103 | static void falcon_push_irq_moderation(struct efx_channel *channel) |
8ceee660 BH |
104 | { |
105 | efx_dword_t timer_cmd; | |
106 | struct efx_nic *efx = channel->efx; | |
107 | ||
108 | /* Set timer register */ | |
109 | if (channel->irq_moderation) { | |
8ceee660 | 110 | EFX_POPULATE_DWORD_2(timer_cmd, |
3e6c4538 BH |
111 | FRF_AB_TC_TIMER_MODE, |
112 | FFE_BB_TIMER_MODE_INT_HLDOFF, | |
113 | FRF_AB_TC_TIMER_VAL, | |
0d86ebd8 | 114 | channel->irq_moderation - 1); |
8ceee660 BH |
115 | } else { |
116 | EFX_POPULATE_DWORD_2(timer_cmd, | |
3e6c4538 BH |
117 | FRF_AB_TC_TIMER_MODE, |
118 | FFE_BB_TIMER_MODE_DIS, | |
119 | FRF_AB_TC_TIMER_VAL, 0); | |
8ceee660 | 120 | } |
3e6c4538 | 121 | BUILD_BUG_ON(FR_AA_TIMER_COMMAND_KER != FR_BZ_TIMER_COMMAND_P0); |
12d00cad BH |
122 | efx_writed_page_locked(efx, &timer_cmd, FR_BZ_TIMER_COMMAND_P0, |
123 | channel->channel); | |
127e6e10 BH |
124 | } |
125 | ||
d3245b28 BH |
126 | static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx); |
127 | ||
127e6e10 BH |
128 | static void falcon_prepare_flush(struct efx_nic *efx) |
129 | { | |
130 | falcon_deconfigure_mac_wrapper(efx); | |
131 | ||
132 | /* Wait for the tx and rx fifo's to get to the next packet boundary | |
133 | * (~1ms without back-pressure), then to drain the remainder of the | |
134 | * fifo's at data path speeds (negligible), with a healthy margin. */ | |
135 | msleep(10); | |
6bc5d3a9 BH |
136 | } |
137 | ||
8ceee660 BH |
138 | /* Acknowledge a legacy interrupt from Falcon |
139 | * | |
140 | * This acknowledges a legacy (not MSI) interrupt via INT_ACK_KER_REG. | |
141 | * | |
142 | * Due to SFC bug 3706 (silicon revision <=A1) reads can be duplicated in the | |
143 | * BIU. Interrupt acknowledge is read sensitive so must write instead | |
144 | * (then read to ensure the BIU collector is flushed) | |
145 | * | |
146 | * NB most hardware supports MSI interrupts | |
147 | */ | |
152b6a62 | 148 | inline void falcon_irq_ack_a1(struct efx_nic *efx) |
8ceee660 BH |
149 | { |
150 | efx_dword_t reg; | |
151 | ||
3e6c4538 | 152 | EFX_POPULATE_DWORD_1(reg, FRF_AA_INT_ACK_KER_FIELD, 0xb7eb7e); |
12d00cad BH |
153 | efx_writed(efx, ®, FR_AA_INT_ACK_KER); |
154 | efx_readd(efx, ®, FR_AA_WORK_AROUND_BROKEN_PCI_READS); | |
8ceee660 BH |
155 | } |
156 | ||
8ceee660 | 157 | |
152b6a62 | 158 | irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) |
8ceee660 | 159 | { |
d3208b5e BH |
160 | struct efx_nic *efx = dev_id; |
161 | efx_oword_t *int_ker = efx->irq_status.addr; | |
8ceee660 BH |
162 | struct efx_channel *channel; |
163 | int syserr; | |
164 | int queues; | |
165 | ||
166 | /* Check to see if this is our interrupt. If it isn't, we | |
167 | * exit without having touched the hardware. | |
168 | */ | |
169 | if (unlikely(EFX_OWORD_IS_ZERO(*int_ker))) { | |
170 | EFX_TRACE(efx, "IRQ %d on CPU %d not for me\n", irq, | |
171 | raw_smp_processor_id()); | |
172 | return IRQ_NONE; | |
173 | } | |
174 | efx->last_irq_cpu = raw_smp_processor_id(); | |
175 | EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n", | |
176 | irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker)); | |
177 | ||
178 | /* Check to see if we have a serious error condition */ | |
3e6c4538 | 179 | syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT); |
8ceee660 | 180 | if (unlikely(syserr)) |
152b6a62 | 181 | return efx_nic_fatal_interrupt(efx); |
8ceee660 BH |
182 | |
183 | /* Determine interrupting queues, clear interrupt status | |
184 | * register and acknowledge the device interrupt. | |
185 | */ | |
674979d3 BH |
186 | BUILD_BUG_ON(FSF_AZ_NET_IVEC_INT_Q_WIDTH > EFX_MAX_CHANNELS); |
187 | queues = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_INT_Q); | |
8ceee660 BH |
188 | EFX_ZERO_OWORD(*int_ker); |
189 | wmb(); /* Ensure the vector is cleared before interrupt ack */ | |
190 | falcon_irq_ack_a1(efx); | |
191 | ||
192 | /* Schedule processing of any interrupting queues */ | |
193 | channel = &efx->channel[0]; | |
194 | while (queues) { | |
195 | if (queues & 0x01) | |
196 | efx_schedule_channel(channel); | |
197 | channel++; | |
198 | queues >>= 1; | |
199 | } | |
200 | ||
201 | return IRQ_HANDLED; | |
202 | } | |
8ceee660 BH |
203 | /************************************************************************** |
204 | * | |
205 | * EEPROM/flash | |
206 | * | |
207 | ************************************************************************** | |
208 | */ | |
209 | ||
23d30f02 | 210 | #define FALCON_SPI_MAX_LEN sizeof(efx_oword_t) |
8ceee660 | 211 | |
be4ea89c BH |
212 | static int falcon_spi_poll(struct efx_nic *efx) |
213 | { | |
214 | efx_oword_t reg; | |
12d00cad | 215 | efx_reado(efx, ®, FR_AB_EE_SPI_HCMD); |
3e6c4538 | 216 | return EFX_OWORD_FIELD(reg, FRF_AB_EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0; |
be4ea89c BH |
217 | } |
218 | ||
8ceee660 BH |
219 | /* Wait for SPI command completion */ |
220 | static int falcon_spi_wait(struct efx_nic *efx) | |
221 | { | |
be4ea89c BH |
222 | /* Most commands will finish quickly, so we start polling at |
223 | * very short intervals. Sometimes the command may have to | |
224 | * wait for VPD or expansion ROM access outside of our | |
225 | * control, so we allow up to 100 ms. */ | |
226 | unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 10); | |
227 | int i; | |
228 | ||
229 | for (i = 0; i < 10; i++) { | |
230 | if (!falcon_spi_poll(efx)) | |
231 | return 0; | |
232 | udelay(10); | |
233 | } | |
8ceee660 | 234 | |
4a5b504d | 235 | for (;;) { |
be4ea89c | 236 | if (!falcon_spi_poll(efx)) |
8ceee660 | 237 | return 0; |
4a5b504d BH |
238 | if (time_after_eq(jiffies, timeout)) { |
239 | EFX_ERR(efx, "timed out waiting for SPI\n"); | |
240 | return -ETIMEDOUT; | |
241 | } | |
be4ea89c | 242 | schedule_timeout_uninterruptible(1); |
4a5b504d | 243 | } |
8ceee660 BH |
244 | } |
245 | ||
76884835 | 246 | int falcon_spi_cmd(struct efx_nic *efx, const struct efx_spi_device *spi, |
f4150724 | 247 | unsigned int command, int address, |
23d30f02 | 248 | const void *in, void *out, size_t len) |
8ceee660 | 249 | { |
4a5b504d BH |
250 | bool addressed = (address >= 0); |
251 | bool reading = (out != NULL); | |
8ceee660 BH |
252 | efx_oword_t reg; |
253 | int rc; | |
254 | ||
4a5b504d BH |
255 | /* Input validation */ |
256 | if (len > FALCON_SPI_MAX_LEN) | |
257 | return -EINVAL; | |
f4150724 | 258 | BUG_ON(!mutex_is_locked(&efx->spi_lock)); |
8ceee660 | 259 | |
be4ea89c BH |
260 | /* Check that previous command is not still running */ |
261 | rc = falcon_spi_poll(efx); | |
8ceee660 BH |
262 | if (rc) |
263 | return rc; | |
264 | ||
4a5b504d BH |
265 | /* Program address register, if we have an address */ |
266 | if (addressed) { | |
3e6c4538 | 267 | EFX_POPULATE_OWORD_1(reg, FRF_AB_EE_SPI_HADR_ADR, address); |
12d00cad | 268 | efx_writeo(efx, ®, FR_AB_EE_SPI_HADR); |
4a5b504d BH |
269 | } |
270 | ||
271 | /* Program data register, if we have data */ | |
272 | if (in != NULL) { | |
273 | memcpy(®, in, len); | |
12d00cad | 274 | efx_writeo(efx, ®, FR_AB_EE_SPI_HDATA); |
4a5b504d | 275 | } |
8ceee660 | 276 | |
4a5b504d | 277 | /* Issue read/write command */ |
8ceee660 | 278 | EFX_POPULATE_OWORD_7(reg, |
3e6c4538 BH |
279 | FRF_AB_EE_SPI_HCMD_CMD_EN, 1, |
280 | FRF_AB_EE_SPI_HCMD_SF_SEL, spi->device_id, | |
281 | FRF_AB_EE_SPI_HCMD_DABCNT, len, | |
282 | FRF_AB_EE_SPI_HCMD_READ, reading, | |
283 | FRF_AB_EE_SPI_HCMD_DUBCNT, 0, | |
284 | FRF_AB_EE_SPI_HCMD_ADBCNT, | |
4a5b504d | 285 | (addressed ? spi->addr_len : 0), |
3e6c4538 | 286 | FRF_AB_EE_SPI_HCMD_ENC, command); |
12d00cad | 287 | efx_writeo(efx, ®, FR_AB_EE_SPI_HCMD); |
8ceee660 | 288 | |
4a5b504d | 289 | /* Wait for read/write to complete */ |
8ceee660 BH |
290 | rc = falcon_spi_wait(efx); |
291 | if (rc) | |
292 | return rc; | |
293 | ||
294 | /* Read data */ | |
4a5b504d | 295 | if (out != NULL) { |
12d00cad | 296 | efx_reado(efx, ®, FR_AB_EE_SPI_HDATA); |
4a5b504d BH |
297 | memcpy(out, ®, len); |
298 | } | |
299 | ||
8ceee660 BH |
300 | return 0; |
301 | } | |
302 | ||
23d30f02 BH |
303 | static size_t |
304 | falcon_spi_write_limit(const struct efx_spi_device *spi, size_t start) | |
4a5b504d BH |
305 | { |
306 | return min(FALCON_SPI_MAX_LEN, | |
307 | (spi->block_size - (start & (spi->block_size - 1)))); | |
308 | } | |
309 | ||
310 | static inline u8 | |
311 | efx_spi_munge_command(const struct efx_spi_device *spi, | |
312 | const u8 command, const unsigned int address) | |
313 | { | |
314 | return command | (((address >> 8) & spi->munge_address) << 3); | |
315 | } | |
316 | ||
be4ea89c | 317 | /* Wait up to 10 ms for buffered write completion */ |
76884835 BH |
318 | int |
319 | falcon_spi_wait_write(struct efx_nic *efx, const struct efx_spi_device *spi) | |
4a5b504d | 320 | { |
be4ea89c | 321 | unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 100); |
4a5b504d | 322 | u8 status; |
be4ea89c | 323 | int rc; |
4a5b504d | 324 | |
be4ea89c | 325 | for (;;) { |
76884835 | 326 | rc = falcon_spi_cmd(efx, spi, SPI_RDSR, -1, NULL, |
4a5b504d BH |
327 | &status, sizeof(status)); |
328 | if (rc) | |
329 | return rc; | |
330 | if (!(status & SPI_STATUS_NRDY)) | |
331 | return 0; | |
be4ea89c BH |
332 | if (time_after_eq(jiffies, timeout)) { |
333 | EFX_ERR(efx, "SPI write timeout on device %d" | |
334 | " last status=0x%02x\n", | |
335 | spi->device_id, status); | |
336 | return -ETIMEDOUT; | |
337 | } | |
338 | schedule_timeout_uninterruptible(1); | |
4a5b504d | 339 | } |
4a5b504d BH |
340 | } |
341 | ||
76884835 BH |
342 | int falcon_spi_read(struct efx_nic *efx, const struct efx_spi_device *spi, |
343 | loff_t start, size_t len, size_t *retlen, u8 *buffer) | |
4a5b504d | 344 | { |
23d30f02 BH |
345 | size_t block_len, pos = 0; |
346 | unsigned int command; | |
4a5b504d BH |
347 | int rc = 0; |
348 | ||
349 | while (pos < len) { | |
23d30f02 | 350 | block_len = min(len - pos, FALCON_SPI_MAX_LEN); |
4a5b504d BH |
351 | |
352 | command = efx_spi_munge_command(spi, SPI_READ, start + pos); | |
76884835 | 353 | rc = falcon_spi_cmd(efx, spi, command, start + pos, NULL, |
4a5b504d BH |
354 | buffer + pos, block_len); |
355 | if (rc) | |
356 | break; | |
357 | pos += block_len; | |
358 | ||
359 | /* Avoid locking up the system */ | |
360 | cond_resched(); | |
361 | if (signal_pending(current)) { | |
362 | rc = -EINTR; | |
363 | break; | |
364 | } | |
365 | } | |
366 | ||
367 | if (retlen) | |
368 | *retlen = pos; | |
369 | return rc; | |
370 | } | |
371 | ||
76884835 BH |
372 | int |
373 | falcon_spi_write(struct efx_nic *efx, const struct efx_spi_device *spi, | |
374 | loff_t start, size_t len, size_t *retlen, const u8 *buffer) | |
4a5b504d BH |
375 | { |
376 | u8 verify_buffer[FALCON_SPI_MAX_LEN]; | |
23d30f02 BH |
377 | size_t block_len, pos = 0; |
378 | unsigned int command; | |
4a5b504d BH |
379 | int rc = 0; |
380 | ||
381 | while (pos < len) { | |
76884835 | 382 | rc = falcon_spi_cmd(efx, spi, SPI_WREN, -1, NULL, NULL, 0); |
4a5b504d BH |
383 | if (rc) |
384 | break; | |
385 | ||
23d30f02 | 386 | block_len = min(len - pos, |
4a5b504d BH |
387 | falcon_spi_write_limit(spi, start + pos)); |
388 | command = efx_spi_munge_command(spi, SPI_WRITE, start + pos); | |
76884835 | 389 | rc = falcon_spi_cmd(efx, spi, command, start + pos, |
4a5b504d BH |
390 | buffer + pos, NULL, block_len); |
391 | if (rc) | |
392 | break; | |
393 | ||
76884835 | 394 | rc = falcon_spi_wait_write(efx, spi); |
4a5b504d BH |
395 | if (rc) |
396 | break; | |
397 | ||
398 | command = efx_spi_munge_command(spi, SPI_READ, start + pos); | |
76884835 | 399 | rc = falcon_spi_cmd(efx, spi, command, start + pos, |
4a5b504d BH |
400 | NULL, verify_buffer, block_len); |
401 | if (memcmp(verify_buffer, buffer + pos, block_len)) { | |
402 | rc = -EIO; | |
403 | break; | |
404 | } | |
405 | ||
406 | pos += block_len; | |
407 | ||
408 | /* Avoid locking up the system */ | |
409 | cond_resched(); | |
410 | if (signal_pending(current)) { | |
411 | rc = -EINTR; | |
412 | break; | |
413 | } | |
414 | } | |
415 | ||
416 | if (retlen) | |
417 | *retlen = pos; | |
418 | return rc; | |
419 | } | |
420 | ||
8ceee660 BH |
421 | /************************************************************************** |
422 | * | |
423 | * MAC wrapper | |
424 | * | |
425 | ************************************************************************** | |
426 | */ | |
177dfcd8 | 427 | |
ef2b90ee BH |
428 | static void falcon_push_multicast_hash(struct efx_nic *efx) |
429 | { | |
430 | union efx_multicast_hash *mc_hash = &efx->multicast_hash; | |
431 | ||
432 | WARN_ON(!mutex_is_locked(&efx->mac_lock)); | |
433 | ||
434 | efx_writeo(efx, &mc_hash->oword[0], FR_AB_MAC_MC_HASH_REG0); | |
435 | efx_writeo(efx, &mc_hash->oword[1], FR_AB_MAC_MC_HASH_REG1); | |
436 | } | |
437 | ||
d3245b28 | 438 | static void falcon_reset_macs(struct efx_nic *efx) |
8ceee660 | 439 | { |
d3245b28 BH |
440 | struct falcon_nic_data *nic_data = efx->nic_data; |
441 | efx_oword_t reg, mac_ctrl; | |
8ceee660 BH |
442 | int count; |
443 | ||
daeda630 | 444 | if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) { |
177dfcd8 BH |
445 | /* It's not safe to use GLB_CTL_REG to reset the |
446 | * macs, so instead use the internal MAC resets | |
447 | */ | |
448 | if (!EFX_IS10G(efx)) { | |
3e6c4538 | 449 | EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 1); |
12d00cad | 450 | efx_writeo(efx, ®, FR_AB_GM_CFG1); |
177dfcd8 BH |
451 | udelay(1000); |
452 | ||
3e6c4538 | 453 | EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 0); |
12d00cad | 454 | efx_writeo(efx, ®, FR_AB_GM_CFG1); |
177dfcd8 | 455 | udelay(1000); |
d3245b28 | 456 | return; |
177dfcd8 | 457 | } else { |
3e6c4538 | 458 | EFX_POPULATE_OWORD_1(reg, FRF_AB_XM_CORE_RST, 1); |
12d00cad | 459 | efx_writeo(efx, ®, FR_AB_XM_GLB_CFG); |
177dfcd8 BH |
460 | |
461 | for (count = 0; count < 10000; count++) { | |
12d00cad | 462 | efx_reado(efx, ®, FR_AB_XM_GLB_CFG); |
3e6c4538 BH |
463 | if (EFX_OWORD_FIELD(reg, FRF_AB_XM_CORE_RST) == |
464 | 0) | |
d3245b28 | 465 | return; |
177dfcd8 BH |
466 | udelay(10); |
467 | } | |
8ceee660 | 468 | |
177dfcd8 | 469 | EFX_ERR(efx, "timed out waiting for XMAC core reset\n"); |
177dfcd8 BH |
470 | } |
471 | } | |
8ceee660 | 472 | |
d3245b28 BH |
473 | /* Mac stats will fail whist the TX fifo is draining */ |
474 | WARN_ON(nic_data->stats_disable_count == 0); | |
8ceee660 | 475 | |
d3245b28 BH |
476 | efx_reado(efx, &mac_ctrl, FR_AB_MAC_CTRL); |
477 | EFX_SET_OWORD_FIELD(mac_ctrl, FRF_BB_TXFIFO_DRAIN_EN, 1); | |
478 | efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL); | |
8ceee660 | 479 | |
12d00cad | 480 | efx_reado(efx, ®, FR_AB_GLB_CTL); |
3e6c4538 BH |
481 | EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGTX, 1); |
482 | EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGRX, 1); | |
483 | EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_EM, 1); | |
12d00cad | 484 | efx_writeo(efx, ®, FR_AB_GLB_CTL); |
8ceee660 BH |
485 | |
486 | count = 0; | |
487 | while (1) { | |
12d00cad | 488 | efx_reado(efx, ®, FR_AB_GLB_CTL); |
3e6c4538 BH |
489 | if (!EFX_OWORD_FIELD(reg, FRF_AB_RST_XGTX) && |
490 | !EFX_OWORD_FIELD(reg, FRF_AB_RST_XGRX) && | |
491 | !EFX_OWORD_FIELD(reg, FRF_AB_RST_EM)) { | |
8ceee660 BH |
492 | EFX_LOG(efx, "Completed MAC reset after %d loops\n", |
493 | count); | |
494 | break; | |
495 | } | |
496 | if (count > 20) { | |
497 | EFX_ERR(efx, "MAC reset failed\n"); | |
498 | break; | |
499 | } | |
500 | count++; | |
501 | udelay(10); | |
502 | } | |
503 | ||
d3245b28 BH |
504 | /* Ensure the correct MAC is selected before statistics |
505 | * are re-enabled by the caller */ | |
506 | efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL); | |
177dfcd8 BH |
507 | } |
508 | ||
509 | void falcon_drain_tx_fifo(struct efx_nic *efx) | |
510 | { | |
511 | efx_oword_t reg; | |
512 | ||
daeda630 | 513 | if ((efx_nic_rev(efx) < EFX_REV_FALCON_B0) || |
177dfcd8 BH |
514 | (efx->loopback_mode != LOOPBACK_NONE)) |
515 | return; | |
516 | ||
12d00cad | 517 | efx_reado(efx, ®, FR_AB_MAC_CTRL); |
177dfcd8 | 518 | /* There is no point in draining more than once */ |
3e6c4538 | 519 | if (EFX_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN)) |
177dfcd8 BH |
520 | return; |
521 | ||
522 | falcon_reset_macs(efx); | |
8ceee660 BH |
523 | } |
524 | ||
d3245b28 | 525 | static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx) |
8ceee660 | 526 | { |
177dfcd8 | 527 | efx_oword_t reg; |
8ceee660 | 528 | |
daeda630 | 529 | if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) |
8ceee660 BH |
530 | return; |
531 | ||
532 | /* Isolate the MAC -> RX */ | |
12d00cad | 533 | efx_reado(efx, ®, FR_AZ_RX_CFG); |
3e6c4538 | 534 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 0); |
12d00cad | 535 | efx_writeo(efx, ®, FR_AZ_RX_CFG); |
8ceee660 | 536 | |
d3245b28 BH |
537 | /* Isolate TX -> MAC */ |
538 | falcon_drain_tx_fifo(efx); | |
8ceee660 BH |
539 | } |
540 | ||
541 | void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) | |
542 | { | |
eb50c0d6 | 543 | struct efx_link_state *link_state = &efx->link_state; |
8ceee660 BH |
544 | efx_oword_t reg; |
545 | int link_speed; | |
8ceee660 | 546 | |
eb50c0d6 | 547 | switch (link_state->speed) { |
f31a45d2 BH |
548 | case 10000: link_speed = 3; break; |
549 | case 1000: link_speed = 2; break; | |
550 | case 100: link_speed = 1; break; | |
551 | default: link_speed = 0; break; | |
552 | } | |
8ceee660 BH |
553 | /* MAC_LINK_STATUS controls MAC backpressure but doesn't work |
554 | * as advertised. Disable to ensure packets are not | |
555 | * indefinitely held and TX queue can be flushed at any point | |
556 | * while the link is down. */ | |
557 | EFX_POPULATE_OWORD_5(reg, | |
3e6c4538 BH |
558 | FRF_AB_MAC_XOFF_VAL, 0xffff /* max pause time */, |
559 | FRF_AB_MAC_BCAD_ACPT, 1, | |
560 | FRF_AB_MAC_UC_PROM, efx->promiscuous, | |
561 | FRF_AB_MAC_LINK_STATUS, 1, /* always set */ | |
562 | FRF_AB_MAC_SPEED, link_speed); | |
8ceee660 BH |
563 | /* On B0, MAC backpressure can be disabled and packets get |
564 | * discarded. */ | |
daeda630 | 565 | if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { |
3e6c4538 | 566 | EFX_SET_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN, |
eb50c0d6 | 567 | !link_state->up); |
8ceee660 BH |
568 | } |
569 | ||
12d00cad | 570 | efx_writeo(efx, ®, FR_AB_MAC_CTRL); |
8ceee660 BH |
571 | |
572 | /* Restore the multicast hash registers. */ | |
8be4f3e6 | 573 | falcon_push_multicast_hash(efx); |
8ceee660 | 574 | |
12d00cad | 575 | efx_reado(efx, ®, FR_AZ_RX_CFG); |
4b0d29dc BH |
576 | /* Enable XOFF signal from RX FIFO (we enabled it during NIC |
577 | * initialisation but it may read back as 0) */ | |
578 | EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1); | |
8ceee660 | 579 | /* Unisolate the MAC -> RX */ |
daeda630 | 580 | if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) |
3e6c4538 | 581 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1); |
12d00cad | 582 | efx_writeo(efx, ®, FR_AZ_RX_CFG); |
8ceee660 BH |
583 | } |
584 | ||
55edc6e6 | 585 | static void falcon_stats_request(struct efx_nic *efx) |
8ceee660 | 586 | { |
55edc6e6 | 587 | struct falcon_nic_data *nic_data = efx->nic_data; |
8ceee660 | 588 | efx_oword_t reg; |
8ceee660 | 589 | |
55edc6e6 BH |
590 | WARN_ON(nic_data->stats_pending); |
591 | WARN_ON(nic_data->stats_disable_count); | |
8ceee660 | 592 | |
55edc6e6 BH |
593 | if (nic_data->stats_dma_done == NULL) |
594 | return; /* no mac selected */ | |
8ceee660 | 595 | |
55edc6e6 BH |
596 | *nic_data->stats_dma_done = FALCON_STATS_NOT_DONE; |
597 | nic_data->stats_pending = true; | |
8ceee660 BH |
598 | wmb(); /* ensure done flag is clear */ |
599 | ||
600 | /* Initiate DMA transfer of stats */ | |
601 | EFX_POPULATE_OWORD_2(reg, | |
3e6c4538 BH |
602 | FRF_AB_MAC_STAT_DMA_CMD, 1, |
603 | FRF_AB_MAC_STAT_DMA_ADR, | |
8ceee660 | 604 | efx->stats_buffer.dma_addr); |
12d00cad | 605 | efx_writeo(efx, ®, FR_AB_MAC_STAT_DMA); |
8ceee660 | 606 | |
55edc6e6 BH |
607 | mod_timer(&nic_data->stats_timer, round_jiffies_up(jiffies + HZ / 2)); |
608 | } | |
609 | ||
610 | static void falcon_stats_complete(struct efx_nic *efx) | |
611 | { | |
612 | struct falcon_nic_data *nic_data = efx->nic_data; | |
613 | ||
614 | if (!nic_data->stats_pending) | |
615 | return; | |
616 | ||
617 | nic_data->stats_pending = 0; | |
618 | if (*nic_data->stats_dma_done == FALCON_STATS_DONE) { | |
619 | rmb(); /* read the done flag before the stats */ | |
620 | efx->mac_op->update_stats(efx); | |
621 | } else { | |
622 | EFX_ERR(efx, "timed out waiting for statistics\n"); | |
8ceee660 | 623 | } |
55edc6e6 | 624 | } |
8ceee660 | 625 | |
55edc6e6 BH |
626 | static void falcon_stats_timer_func(unsigned long context) |
627 | { | |
628 | struct efx_nic *efx = (struct efx_nic *)context; | |
629 | struct falcon_nic_data *nic_data = efx->nic_data; | |
630 | ||
631 | spin_lock(&efx->stats_lock); | |
632 | ||
633 | falcon_stats_complete(efx); | |
634 | if (nic_data->stats_disable_count == 0) | |
635 | falcon_stats_request(efx); | |
636 | ||
637 | spin_unlock(&efx->stats_lock); | |
8ceee660 BH |
638 | } |
639 | ||
d3245b28 BH |
640 | static void falcon_switch_mac(struct efx_nic *efx); |
641 | ||
fdaa9aed SH |
642 | static bool falcon_loopback_link_poll(struct efx_nic *efx) |
643 | { | |
644 | struct efx_link_state old_state = efx->link_state; | |
645 | ||
646 | WARN_ON(!mutex_is_locked(&efx->mac_lock)); | |
647 | WARN_ON(!LOOPBACK_INTERNAL(efx)); | |
648 | ||
649 | efx->link_state.fd = true; | |
650 | efx->link_state.fc = efx->wanted_fc; | |
651 | efx->link_state.up = true; | |
652 | ||
653 | if (efx->loopback_mode == LOOPBACK_GMAC) | |
654 | efx->link_state.speed = 1000; | |
655 | else | |
656 | efx->link_state.speed = 10000; | |
657 | ||
658 | return !efx_link_state_equal(&efx->link_state, &old_state); | |
659 | } | |
660 | ||
d3245b28 BH |
661 | static int falcon_reconfigure_port(struct efx_nic *efx) |
662 | { | |
663 | int rc; | |
664 | ||
665 | WARN_ON(efx_nic_rev(efx) > EFX_REV_FALCON_B0); | |
666 | ||
667 | /* Poll the PHY link state *before* reconfiguring it. This means we | |
668 | * will pick up the correct speed (in loopback) to select the correct | |
669 | * MAC. | |
670 | */ | |
671 | if (LOOPBACK_INTERNAL(efx)) | |
672 | falcon_loopback_link_poll(efx); | |
673 | else | |
674 | efx->phy_op->poll(efx); | |
675 | ||
676 | falcon_stop_nic_stats(efx); | |
677 | falcon_deconfigure_mac_wrapper(efx); | |
678 | ||
679 | falcon_switch_mac(efx); | |
680 | ||
681 | efx->phy_op->reconfigure(efx); | |
682 | rc = efx->mac_op->reconfigure(efx); | |
683 | BUG_ON(rc); | |
684 | ||
685 | falcon_start_nic_stats(efx); | |
686 | ||
687 | /* Synchronise efx->link_state with the kernel */ | |
688 | efx_link_status_changed(efx); | |
689 | ||
690 | return 0; | |
691 | } | |
692 | ||
8ceee660 BH |
693 | /************************************************************************** |
694 | * | |
695 | * PHY access via GMII | |
696 | * | |
697 | ************************************************************************** | |
698 | */ | |
699 | ||
8ceee660 BH |
700 | /* Wait for GMII access to complete */ |
701 | static int falcon_gmii_wait(struct efx_nic *efx) | |
702 | { | |
80cb9a0f | 703 | efx_oword_t md_stat; |
8ceee660 BH |
704 | int count; |
705 | ||
177dfcd8 BH |
706 | /* wait upto 50ms - taken max from datasheet */ |
707 | for (count = 0; count < 5000; count++) { | |
80cb9a0f BH |
708 | efx_reado(efx, &md_stat, FR_AB_MD_STAT); |
709 | if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) { | |
710 | if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_LNFL) != 0 || | |
711 | EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSERR) != 0) { | |
8ceee660 | 712 | EFX_ERR(efx, "error from GMII access " |
80cb9a0f BH |
713 | EFX_OWORD_FMT"\n", |
714 | EFX_OWORD_VAL(md_stat)); | |
8ceee660 BH |
715 | return -EIO; |
716 | } | |
717 | return 0; | |
718 | } | |
719 | udelay(10); | |
720 | } | |
721 | EFX_ERR(efx, "timed out waiting for GMII\n"); | |
722 | return -ETIMEDOUT; | |
723 | } | |
724 | ||
68e7f45e BH |
725 | /* Write an MDIO register of a PHY connected to Falcon. */ |
726 | static int falcon_mdio_write(struct net_device *net_dev, | |
727 | int prtad, int devad, u16 addr, u16 value) | |
8ceee660 | 728 | { |
767e468c | 729 | struct efx_nic *efx = netdev_priv(net_dev); |
8ceee660 | 730 | efx_oword_t reg; |
68e7f45e | 731 | int rc; |
8ceee660 | 732 | |
68e7f45e BH |
733 | EFX_REGDUMP(efx, "writing MDIO %d register %d.%d with 0x%04x\n", |
734 | prtad, devad, addr, value); | |
8ceee660 | 735 | |
ab867461 | 736 | mutex_lock(&efx->mdio_lock); |
8ceee660 | 737 | |
68e7f45e BH |
738 | /* Check MDIO not currently being accessed */ |
739 | rc = falcon_gmii_wait(efx); | |
740 | if (rc) | |
8ceee660 BH |
741 | goto out; |
742 | ||
743 | /* Write the address/ID register */ | |
3e6c4538 | 744 | EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr); |
12d00cad | 745 | efx_writeo(efx, ®, FR_AB_MD_PHY_ADR); |
8ceee660 | 746 | |
3e6c4538 BH |
747 | EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad, |
748 | FRF_AB_MD_DEV_ADR, devad); | |
12d00cad | 749 | efx_writeo(efx, ®, FR_AB_MD_ID); |
8ceee660 BH |
750 | |
751 | /* Write data */ | |
3e6c4538 | 752 | EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_TXD, value); |
12d00cad | 753 | efx_writeo(efx, ®, FR_AB_MD_TXD); |
8ceee660 BH |
754 | |
755 | EFX_POPULATE_OWORD_2(reg, | |
3e6c4538 BH |
756 | FRF_AB_MD_WRC, 1, |
757 | FRF_AB_MD_GC, 0); | |
12d00cad | 758 | efx_writeo(efx, ®, FR_AB_MD_CS); |
8ceee660 BH |
759 | |
760 | /* Wait for data to be written */ | |
68e7f45e BH |
761 | rc = falcon_gmii_wait(efx); |
762 | if (rc) { | |
8ceee660 BH |
763 | /* Abort the write operation */ |
764 | EFX_POPULATE_OWORD_2(reg, | |
3e6c4538 BH |
765 | FRF_AB_MD_WRC, 0, |
766 | FRF_AB_MD_GC, 1); | |
12d00cad | 767 | efx_writeo(efx, ®, FR_AB_MD_CS); |
8ceee660 BH |
768 | udelay(10); |
769 | } | |
770 | ||
ab867461 SH |
771 | out: |
772 | mutex_unlock(&efx->mdio_lock); | |
68e7f45e | 773 | return rc; |
8ceee660 BH |
774 | } |
775 | ||
68e7f45e BH |
776 | /* Read an MDIO register of a PHY connected to Falcon. */ |
777 | static int falcon_mdio_read(struct net_device *net_dev, | |
778 | int prtad, int devad, u16 addr) | |
8ceee660 | 779 | { |
767e468c | 780 | struct efx_nic *efx = netdev_priv(net_dev); |
8ceee660 | 781 | efx_oword_t reg; |
68e7f45e | 782 | int rc; |
8ceee660 | 783 | |
ab867461 | 784 | mutex_lock(&efx->mdio_lock); |
8ceee660 | 785 | |
68e7f45e BH |
786 | /* Check MDIO not currently being accessed */ |
787 | rc = falcon_gmii_wait(efx); | |
788 | if (rc) | |
8ceee660 BH |
789 | goto out; |
790 | ||
3e6c4538 | 791 | EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr); |
12d00cad | 792 | efx_writeo(efx, ®, FR_AB_MD_PHY_ADR); |
8ceee660 | 793 | |
3e6c4538 BH |
794 | EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad, |
795 | FRF_AB_MD_DEV_ADR, devad); | |
12d00cad | 796 | efx_writeo(efx, ®, FR_AB_MD_ID); |
8ceee660 BH |
797 | |
798 | /* Request data to be read */ | |
3e6c4538 | 799 | EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_RDC, 1, FRF_AB_MD_GC, 0); |
12d00cad | 800 | efx_writeo(efx, ®, FR_AB_MD_CS); |
8ceee660 BH |
801 | |
802 | /* Wait for data to become available */ | |
68e7f45e BH |
803 | rc = falcon_gmii_wait(efx); |
804 | if (rc == 0) { | |
12d00cad | 805 | efx_reado(efx, ®, FR_AB_MD_RXD); |
3e6c4538 | 806 | rc = EFX_OWORD_FIELD(reg, FRF_AB_MD_RXD); |
68e7f45e BH |
807 | EFX_REGDUMP(efx, "read from MDIO %d register %d.%d, got %04x\n", |
808 | prtad, devad, addr, rc); | |
8ceee660 BH |
809 | } else { |
810 | /* Abort the read operation */ | |
811 | EFX_POPULATE_OWORD_2(reg, | |
3e6c4538 BH |
812 | FRF_AB_MD_RIC, 0, |
813 | FRF_AB_MD_GC, 1); | |
12d00cad | 814 | efx_writeo(efx, ®, FR_AB_MD_CS); |
8ceee660 | 815 | |
68e7f45e BH |
816 | EFX_LOG(efx, "read from MDIO %d register %d.%d, got error %d\n", |
817 | prtad, devad, addr, rc); | |
8ceee660 BH |
818 | } |
819 | ||
ab867461 SH |
820 | out: |
821 | mutex_unlock(&efx->mdio_lock); | |
68e7f45e | 822 | return rc; |
8ceee660 BH |
823 | } |
824 | ||
26deba50 SH |
825 | static void falcon_clock_mac(struct efx_nic *efx) |
826 | { | |
827 | unsigned strap_val; | |
828 | efx_oword_t nic_stat; | |
829 | ||
830 | /* Configure the NIC generated MAC clock correctly */ | |
831 | efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); | |
832 | strap_val = EFX_IS10G(efx) ? 5 : 3; | |
daeda630 | 833 | if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { |
26deba50 SH |
834 | EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP_EN, 1); |
835 | EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP, strap_val); | |
836 | efx_writeo(efx, &nic_stat, FR_AB_NIC_STAT); | |
837 | } else { | |
838 | /* Falcon A1 does not support 1G/10G speed switching | |
839 | * and must not be used with a PHY that does. */ | |
840 | BUG_ON(EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_PINS) != | |
841 | strap_val); | |
842 | } | |
843 | } | |
844 | ||
d3245b28 | 845 | static void falcon_switch_mac(struct efx_nic *efx) |
177dfcd8 BH |
846 | { |
847 | struct efx_mac_operations *old_mac_op = efx->mac_op; | |
55edc6e6 BH |
848 | struct falcon_nic_data *nic_data = efx->nic_data; |
849 | unsigned int stats_done_offset; | |
177dfcd8 | 850 | |
0cc12838 | 851 | WARN_ON(!mutex_is_locked(&efx->mac_lock)); |
d3245b28 BH |
852 | WARN_ON(nic_data->stats_disable_count == 0); |
853 | ||
177dfcd8 BH |
854 | efx->mac_op = (EFX_IS10G(efx) ? |
855 | &falcon_xmac_operations : &falcon_gmac_operations); | |
177dfcd8 | 856 | |
55edc6e6 BH |
857 | if (EFX_IS10G(efx)) |
858 | stats_done_offset = XgDmaDone_offset; | |
859 | else | |
860 | stats_done_offset = GDmaDone_offset; | |
861 | nic_data->stats_dma_done = efx->stats_buffer.addr + stats_done_offset; | |
862 | ||
0cc12838 | 863 | if (old_mac_op == efx->mac_op) |
d3245b28 | 864 | return; |
177dfcd8 | 865 | |
26deba50 SH |
866 | falcon_clock_mac(efx); |
867 | ||
177dfcd8 | 868 | EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); |
0cc12838 | 869 | /* Not all macs support a mac-level link state */ |
9007b9fa | 870 | efx->xmac_poll_required = false; |
d3245b28 | 871 | falcon_reset_macs(efx); |
177dfcd8 BH |
872 | } |
873 | ||
8ceee660 | 874 | /* This call is responsible for hooking in the MAC and PHY operations */ |
ef2b90ee | 875 | static int falcon_probe_port(struct efx_nic *efx) |
8ceee660 BH |
876 | { |
877 | int rc; | |
878 | ||
96c45726 BH |
879 | switch (efx->phy_type) { |
880 | case PHY_TYPE_SFX7101: | |
881 | efx->phy_op = &falcon_sfx7101_phy_ops; | |
882 | break; | |
883 | case PHY_TYPE_SFT9001A: | |
884 | case PHY_TYPE_SFT9001B: | |
885 | efx->phy_op = &falcon_sft9001_phy_ops; | |
886 | break; | |
887 | case PHY_TYPE_QT2022C2: | |
888 | case PHY_TYPE_QT2025C: | |
b37b62fe | 889 | efx->phy_op = &falcon_qt202x_phy_ops; |
96c45726 BH |
890 | break; |
891 | default: | |
892 | EFX_ERR(efx, "Unknown PHY type %d\n", | |
893 | efx->phy_type); | |
894 | return -ENODEV; | |
895 | } | |
896 | ||
c1c4f453 | 897 | /* Fill out MDIO structure and loopback modes */ |
68e7f45e BH |
898 | efx->mdio.mdio_read = falcon_mdio_read; |
899 | efx->mdio.mdio_write = falcon_mdio_write; | |
c1c4f453 BH |
900 | rc = efx->phy_op->probe(efx); |
901 | if (rc != 0) | |
902 | return rc; | |
8ceee660 | 903 | |
b895d73e SH |
904 | /* Initial assumption */ |
905 | efx->link_state.speed = 10000; | |
906 | efx->link_state.fd = true; | |
907 | ||
8ceee660 | 908 | /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ |
daeda630 | 909 | if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) |
04cc8cac | 910 | efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; |
8ceee660 | 911 | else |
04cc8cac | 912 | efx->wanted_fc = EFX_FC_RX; |
7a6b8f6f SH |
913 | if (efx->mdio.mmds & MDIO_DEVS_AN) |
914 | efx->wanted_fc |= EFX_FC_AUTO; | |
8ceee660 BH |
915 | |
916 | /* Allocate buffer for stats */ | |
152b6a62 BH |
917 | rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer, |
918 | FALCON_MAC_STATS_SIZE); | |
8ceee660 BH |
919 | if (rc) |
920 | return rc; | |
9c8976a1 JSR |
921 | EFX_LOG(efx, "stats buffer at %llx (virt %p phys %llx)\n", |
922 | (u64)efx->stats_buffer.dma_addr, | |
8ceee660 | 923 | efx->stats_buffer.addr, |
9c8976a1 | 924 | (u64)virt_to_phys(efx->stats_buffer.addr)); |
8ceee660 BH |
925 | |
926 | return 0; | |
927 | } | |
928 | ||
ef2b90ee | 929 | static void falcon_remove_port(struct efx_nic *efx) |
8ceee660 | 930 | { |
ff3b00a0 | 931 | efx->phy_op->remove(efx); |
152b6a62 | 932 | efx_nic_free_buffer(efx, &efx->stats_buffer); |
8ceee660 BH |
933 | } |
934 | ||
8c8661e4 BH |
935 | /************************************************************************** |
936 | * | |
937 | * Falcon test code | |
938 | * | |
939 | **************************************************************************/ | |
940 | ||
0aa3fbaa BH |
941 | static int |
942 | falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out) | |
8c8661e4 BH |
943 | { |
944 | struct falcon_nvconfig *nvconfig; | |
945 | struct efx_spi_device *spi; | |
946 | void *region; | |
947 | int rc, magic_num, struct_ver; | |
948 | __le16 *word, *limit; | |
949 | u32 csum; | |
950 | ||
2f7f5730 BH |
951 | spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom; |
952 | if (!spi) | |
953 | return -EINVAL; | |
954 | ||
0a95f563 | 955 | region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL); |
8c8661e4 BH |
956 | if (!region) |
957 | return -ENOMEM; | |
3e6c4538 | 958 | nvconfig = region + FALCON_NVCONFIG_OFFSET; |
8c8661e4 | 959 | |
f4150724 | 960 | mutex_lock(&efx->spi_lock); |
76884835 | 961 | rc = falcon_spi_read(efx, spi, 0, FALCON_NVCONFIG_END, NULL, region); |
f4150724 | 962 | mutex_unlock(&efx->spi_lock); |
8c8661e4 BH |
963 | if (rc) { |
964 | EFX_ERR(efx, "Failed to read %s\n", | |
965 | efx->spi_flash ? "flash" : "EEPROM"); | |
966 | rc = -EIO; | |
967 | goto out; | |
968 | } | |
969 | ||
970 | magic_num = le16_to_cpu(nvconfig->board_magic_num); | |
971 | struct_ver = le16_to_cpu(nvconfig->board_struct_ver); | |
972 | ||
973 | rc = -EINVAL; | |
3e6c4538 | 974 | if (magic_num != FALCON_NVCONFIG_BOARD_MAGIC_NUM) { |
8c8661e4 BH |
975 | EFX_ERR(efx, "NVRAM bad magic 0x%x\n", magic_num); |
976 | goto out; | |
977 | } | |
978 | if (struct_ver < 2) { | |
979 | EFX_ERR(efx, "NVRAM has ancient version 0x%x\n", struct_ver); | |
980 | goto out; | |
981 | } else if (struct_ver < 4) { | |
982 | word = &nvconfig->board_magic_num; | |
983 | limit = (__le16 *) (nvconfig + 1); | |
984 | } else { | |
985 | word = region; | |
0a95f563 | 986 | limit = region + FALCON_NVCONFIG_END; |
8c8661e4 BH |
987 | } |
988 | for (csum = 0; word < limit; ++word) | |
989 | csum += le16_to_cpu(*word); | |
990 | ||
991 | if (~csum & 0xffff) { | |
992 | EFX_ERR(efx, "NVRAM has incorrect checksum\n"); | |
993 | goto out; | |
994 | } | |
995 | ||
996 | rc = 0; | |
997 | if (nvconfig_out) | |
998 | memcpy(nvconfig_out, nvconfig, sizeof(*nvconfig)); | |
999 | ||
1000 | out: | |
1001 | kfree(region); | |
1002 | return rc; | |
1003 | } | |
1004 | ||
0aa3fbaa BH |
1005 | static int falcon_test_nvram(struct efx_nic *efx) |
1006 | { | |
1007 | return falcon_read_nvram(efx, NULL); | |
1008 | } | |
1009 | ||
152b6a62 | 1010 | static const struct efx_nic_register_test falcon_b0_register_tests[] = { |
3e6c4538 | 1011 | { FR_AZ_ADR_REGION, |
4cddca54 | 1012 | EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) }, |
3e6c4538 | 1013 | { FR_AZ_RX_CFG, |
8c8661e4 | 1014 | EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) }, |
3e6c4538 | 1015 | { FR_AZ_TX_CFG, |
8c8661e4 | 1016 | EFX_OWORD32(0x7FFF0037, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1017 | { FR_AZ_TX_RESERVED, |
8c8661e4 | 1018 | EFX_OWORD32(0xFFFEFE80, 0x1FFFFFFF, 0x020000FE, 0x007FFFFF) }, |
3e6c4538 | 1019 | { FR_AB_MAC_CTRL, |
8c8661e4 | 1020 | EFX_OWORD32(0xFFFF0000, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1021 | { FR_AZ_SRM_TX_DC_CFG, |
8c8661e4 | 1022 | EFX_OWORD32(0x001FFFFF, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1023 | { FR_AZ_RX_DC_CFG, |
8c8661e4 | 1024 | EFX_OWORD32(0x0000000F, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1025 | { FR_AZ_RX_DC_PF_WM, |
8c8661e4 | 1026 | EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1027 | { FR_BZ_DP_CTRL, |
8c8661e4 | 1028 | EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1029 | { FR_AB_GM_CFG2, |
177dfcd8 | 1030 | EFX_OWORD32(0x00007337, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1031 | { FR_AB_GMF_CFG0, |
177dfcd8 | 1032 | EFX_OWORD32(0x00001F1F, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1033 | { FR_AB_XM_GLB_CFG, |
8c8661e4 | 1034 | EFX_OWORD32(0x00000C68, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1035 | { FR_AB_XM_TX_CFG, |
8c8661e4 | 1036 | EFX_OWORD32(0x00080164, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1037 | { FR_AB_XM_RX_CFG, |
8c8661e4 | 1038 | EFX_OWORD32(0x07100A0C, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1039 | { FR_AB_XM_RX_PARAM, |
8c8661e4 | 1040 | EFX_OWORD32(0x00001FF8, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1041 | { FR_AB_XM_FC, |
8c8661e4 | 1042 | EFX_OWORD32(0xFFFF0001, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1043 | { FR_AB_XM_ADR_LO, |
8c8661e4 | 1044 | EFX_OWORD32(0xFFFFFFFF, 0x00000000, 0x00000000, 0x00000000) }, |
3e6c4538 | 1045 | { FR_AB_XX_SD_CTL, |
8c8661e4 BH |
1046 | EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) }, |
1047 | }; | |
1048 | ||
152b6a62 BH |
1049 | static int falcon_b0_test_registers(struct efx_nic *efx) |
1050 | { | |
1051 | return efx_nic_test_registers(efx, falcon_b0_register_tests, | |
1052 | ARRAY_SIZE(falcon_b0_register_tests)); | |
1053 | } | |
1054 | ||
8ceee660 BH |
1055 | /************************************************************************** |
1056 | * | |
1057 | * Device reset | |
1058 | * | |
1059 | ************************************************************************** | |
1060 | */ | |
1061 | ||
1062 | /* Resets NIC to known state. This routine must be called in process | |
1063 | * context and is allowed to sleep. */ | |
ef2b90ee | 1064 | static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) |
8ceee660 BH |
1065 | { |
1066 | struct falcon_nic_data *nic_data = efx->nic_data; | |
1067 | efx_oword_t glb_ctl_reg_ker; | |
1068 | int rc; | |
1069 | ||
c459302d | 1070 | EFX_LOG(efx, "performing %s hardware reset\n", RESET_TYPE(method)); |
8ceee660 BH |
1071 | |
1072 | /* Initiate device reset */ | |
1073 | if (method == RESET_TYPE_WORLD) { | |
1074 | rc = pci_save_state(efx->pci_dev); | |
1075 | if (rc) { | |
1076 | EFX_ERR(efx, "failed to backup PCI state of primary " | |
1077 | "function prior to hardware reset\n"); | |
1078 | goto fail1; | |
1079 | } | |
152b6a62 | 1080 | if (efx_nic_is_dual_func(efx)) { |
8ceee660 BH |
1081 | rc = pci_save_state(nic_data->pci_dev2); |
1082 | if (rc) { | |
1083 | EFX_ERR(efx, "failed to backup PCI state of " | |
1084 | "secondary function prior to " | |
1085 | "hardware reset\n"); | |
1086 | goto fail2; | |
1087 | } | |
1088 | } | |
1089 | ||
1090 | EFX_POPULATE_OWORD_2(glb_ctl_reg_ker, | |
3e6c4538 BH |
1091 | FRF_AB_EXT_PHY_RST_DUR, |
1092 | FFE_AB_EXT_PHY_RST_DUR_10240US, | |
1093 | FRF_AB_SWRST, 1); | |
8ceee660 | 1094 | } else { |
8ceee660 | 1095 | EFX_POPULATE_OWORD_7(glb_ctl_reg_ker, |
3e6c4538 BH |
1096 | /* exclude PHY from "invisible" reset */ |
1097 | FRF_AB_EXT_PHY_RST_CTL, | |
1098 | method == RESET_TYPE_INVISIBLE, | |
1099 | /* exclude EEPROM/flash and PCIe */ | |
1100 | FRF_AB_PCIE_CORE_RST_CTL, 1, | |
1101 | FRF_AB_PCIE_NSTKY_RST_CTL, 1, | |
1102 | FRF_AB_PCIE_SD_RST_CTL, 1, | |
1103 | FRF_AB_EE_RST_CTL, 1, | |
1104 | FRF_AB_EXT_PHY_RST_DUR, | |
1105 | FFE_AB_EXT_PHY_RST_DUR_10240US, | |
1106 | FRF_AB_SWRST, 1); | |
1107 | } | |
12d00cad | 1108 | efx_writeo(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL); |
8ceee660 BH |
1109 | |
1110 | EFX_LOG(efx, "waiting for hardware reset\n"); | |
1111 | schedule_timeout_uninterruptible(HZ / 20); | |
1112 | ||
1113 | /* Restore PCI configuration if needed */ | |
1114 | if (method == RESET_TYPE_WORLD) { | |
152b6a62 | 1115 | if (efx_nic_is_dual_func(efx)) { |
8ceee660 BH |
1116 | rc = pci_restore_state(nic_data->pci_dev2); |
1117 | if (rc) { | |
1118 | EFX_ERR(efx, "failed to restore PCI config for " | |
1119 | "the secondary function\n"); | |
1120 | goto fail3; | |
1121 | } | |
1122 | } | |
1123 | rc = pci_restore_state(efx->pci_dev); | |
1124 | if (rc) { | |
1125 | EFX_ERR(efx, "failed to restore PCI config for the " | |
1126 | "primary function\n"); | |
1127 | goto fail4; | |
1128 | } | |
1129 | EFX_LOG(efx, "successfully restored PCI config\n"); | |
1130 | } | |
1131 | ||
1132 | /* Assert that reset complete */ | |
12d00cad | 1133 | efx_reado(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL); |
3e6c4538 | 1134 | if (EFX_OWORD_FIELD(glb_ctl_reg_ker, FRF_AB_SWRST) != 0) { |
8ceee660 BH |
1135 | rc = -ETIMEDOUT; |
1136 | EFX_ERR(efx, "timed out waiting for hardware reset\n"); | |
1137 | goto fail5; | |
1138 | } | |
1139 | EFX_LOG(efx, "hardware reset complete\n"); | |
1140 | ||
1141 | return 0; | |
1142 | ||
1143 | /* pci_save_state() and pci_restore_state() MUST be called in pairs */ | |
1144 | fail2: | |
1145 | fail3: | |
1146 | pci_restore_state(efx->pci_dev); | |
1147 | fail1: | |
1148 | fail4: | |
1149 | fail5: | |
1150 | return rc; | |
1151 | } | |
1152 | ||
ef2b90ee | 1153 | static void falcon_monitor(struct efx_nic *efx) |
fe75820b | 1154 | { |
fdaa9aed | 1155 | bool link_changed; |
fe75820b BH |
1156 | int rc; |
1157 | ||
fdaa9aed SH |
1158 | BUG_ON(!mutex_is_locked(&efx->mac_lock)); |
1159 | ||
fe75820b BH |
1160 | rc = falcon_board(efx)->type->monitor(efx); |
1161 | if (rc) { | |
1162 | EFX_ERR(efx, "Board sensor %s; shutting down PHY\n", | |
1163 | (rc == -ERANGE) ? "reported fault" : "failed"); | |
1164 | efx->phy_mode |= PHY_MODE_LOW_POWER; | |
d3245b28 BH |
1165 | rc = __efx_reconfigure_port(efx); |
1166 | WARN_ON(rc); | |
fe75820b | 1167 | } |
fdaa9aed SH |
1168 | |
1169 | if (LOOPBACK_INTERNAL(efx)) | |
1170 | link_changed = falcon_loopback_link_poll(efx); | |
1171 | else | |
1172 | link_changed = efx->phy_op->poll(efx); | |
1173 | ||
1174 | if (link_changed) { | |
1175 | falcon_stop_nic_stats(efx); | |
1176 | falcon_deconfigure_mac_wrapper(efx); | |
1177 | ||
1178 | falcon_switch_mac(efx); | |
d3245b28 BH |
1179 | rc = efx->mac_op->reconfigure(efx); |
1180 | BUG_ON(rc); | |
fdaa9aed SH |
1181 | |
1182 | falcon_start_nic_stats(efx); | |
1183 | ||
1184 | efx_link_status_changed(efx); | |
1185 | } | |
1186 | ||
9007b9fa BH |
1187 | if (EFX_IS10G(efx)) |
1188 | falcon_poll_xmac(efx); | |
fe75820b BH |
1189 | } |
1190 | ||
8ceee660 BH |
1191 | /* Zeroes out the SRAM contents. This routine must be called in |
1192 | * process context and is allowed to sleep. | |
1193 | */ | |
1194 | static int falcon_reset_sram(struct efx_nic *efx) | |
1195 | { | |
1196 | efx_oword_t srm_cfg_reg_ker, gpio_cfg_reg_ker; | |
1197 | int count; | |
1198 | ||
1199 | /* Set the SRAM wake/sleep GPIO appropriately. */ | |
12d00cad | 1200 | efx_reado(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL); |
3e6c4538 BH |
1201 | EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OEN, 1); |
1202 | EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OUT, 1); | |
12d00cad | 1203 | efx_writeo(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL); |
8ceee660 BH |
1204 | |
1205 | /* Initiate SRAM reset */ | |
1206 | EFX_POPULATE_OWORD_2(srm_cfg_reg_ker, | |
3e6c4538 BH |
1207 | FRF_AZ_SRM_INIT_EN, 1, |
1208 | FRF_AZ_SRM_NB_SZ, 0); | |
12d00cad | 1209 | efx_writeo(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG); |
8ceee660 BH |
1210 | |
1211 | /* Wait for SRAM reset to complete */ | |
1212 | count = 0; | |
1213 | do { | |
1214 | EFX_LOG(efx, "waiting for SRAM reset (attempt %d)...\n", count); | |
1215 | ||
1216 | /* SRAM reset is slow; expect around 16ms */ | |
1217 | schedule_timeout_uninterruptible(HZ / 50); | |
1218 | ||
1219 | /* Check for reset complete */ | |
12d00cad | 1220 | efx_reado(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG); |
3e6c4538 | 1221 | if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, FRF_AZ_SRM_INIT_EN)) { |
8ceee660 BH |
1222 | EFX_LOG(efx, "SRAM reset complete\n"); |
1223 | ||
1224 | return 0; | |
1225 | } | |
1226 | } while (++count < 20); /* wait upto 0.4 sec */ | |
1227 | ||
1228 | EFX_ERR(efx, "timed out waiting for SRAM reset\n"); | |
1229 | return -ETIMEDOUT; | |
1230 | } | |
1231 | ||
4a5b504d BH |
1232 | static int falcon_spi_device_init(struct efx_nic *efx, |
1233 | struct efx_spi_device **spi_device_ret, | |
1234 | unsigned int device_id, u32 device_type) | |
1235 | { | |
1236 | struct efx_spi_device *spi_device; | |
1237 | ||
1238 | if (device_type != 0) { | |
0c53d8c8 | 1239 | spi_device = kzalloc(sizeof(*spi_device), GFP_KERNEL); |
4a5b504d BH |
1240 | if (!spi_device) |
1241 | return -ENOMEM; | |
1242 | spi_device->device_id = device_id; | |
1243 | spi_device->size = | |
1244 | 1 << SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_SIZE); | |
1245 | spi_device->addr_len = | |
1246 | SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ADDR_LEN); | |
1247 | spi_device->munge_address = (spi_device->size == 1 << 9 && | |
1248 | spi_device->addr_len == 1); | |
f4150724 BH |
1249 | spi_device->erase_command = |
1250 | SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ERASE_CMD); | |
1251 | spi_device->erase_size = | |
1252 | 1 << SPI_DEV_TYPE_FIELD(device_type, | |
1253 | SPI_DEV_TYPE_ERASE_SIZE); | |
4a5b504d BH |
1254 | spi_device->block_size = |
1255 | 1 << SPI_DEV_TYPE_FIELD(device_type, | |
1256 | SPI_DEV_TYPE_BLOCK_SIZE); | |
4a5b504d BH |
1257 | } else { |
1258 | spi_device = NULL; | |
1259 | } | |
1260 | ||
1261 | kfree(*spi_device_ret); | |
1262 | *spi_device_ret = spi_device; | |
1263 | return 0; | |
1264 | } | |
1265 | ||
4a5b504d BH |
1266 | static void falcon_remove_spi_devices(struct efx_nic *efx) |
1267 | { | |
1268 | kfree(efx->spi_eeprom); | |
1269 | efx->spi_eeprom = NULL; | |
1270 | kfree(efx->spi_flash); | |
1271 | efx->spi_flash = NULL; | |
1272 | } | |
1273 | ||
8ceee660 BH |
1274 | /* Extract non-volatile configuration */ |
1275 | static int falcon_probe_nvconfig(struct efx_nic *efx) | |
1276 | { | |
1277 | struct falcon_nvconfig *nvconfig; | |
8c8661e4 | 1278 | int board_rev; |
8ceee660 BH |
1279 | int rc; |
1280 | ||
8ceee660 | 1281 | nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL); |
4a5b504d BH |
1282 | if (!nvconfig) |
1283 | return -ENOMEM; | |
8ceee660 | 1284 | |
8c8661e4 BH |
1285 | rc = falcon_read_nvram(efx, nvconfig); |
1286 | if (rc == -EINVAL) { | |
1287 | EFX_ERR(efx, "NVRAM is invalid therefore using defaults\n"); | |
8ceee660 | 1288 | efx->phy_type = PHY_TYPE_NONE; |
68e7f45e | 1289 | efx->mdio.prtad = MDIO_PRTAD_NONE; |
8ceee660 | 1290 | board_rev = 0; |
8c8661e4 BH |
1291 | rc = 0; |
1292 | } else if (rc) { | |
1293 | goto fail1; | |
8ceee660 BH |
1294 | } else { |
1295 | struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2; | |
4a5b504d | 1296 | struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3; |
8ceee660 BH |
1297 | |
1298 | efx->phy_type = v2->port0_phy_type; | |
68e7f45e | 1299 | efx->mdio.prtad = v2->port0_phy_addr; |
8ceee660 | 1300 | board_rev = le16_to_cpu(v2->board_revision); |
4a5b504d | 1301 | |
8c8661e4 | 1302 | if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) { |
3e6c4538 BH |
1303 | rc = falcon_spi_device_init( |
1304 | efx, &efx->spi_flash, FFE_AB_SPI_DEVICE_FLASH, | |
1305 | le32_to_cpu(v3->spi_device_type | |
1306 | [FFE_AB_SPI_DEVICE_FLASH])); | |
4a5b504d BH |
1307 | if (rc) |
1308 | goto fail2; | |
3e6c4538 BH |
1309 | rc = falcon_spi_device_init( |
1310 | efx, &efx->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM, | |
1311 | le32_to_cpu(v3->spi_device_type | |
1312 | [FFE_AB_SPI_DEVICE_EEPROM])); | |
4a5b504d BH |
1313 | if (rc) |
1314 | goto fail2; | |
1315 | } | |
8ceee660 BH |
1316 | } |
1317 | ||
8c8661e4 BH |
1318 | /* Read the MAC addresses */ |
1319 | memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN); | |
1320 | ||
68e7f45e | 1321 | EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad); |
8ceee660 | 1322 | |
3473a5b1 | 1323 | falcon_probe_board(efx, board_rev); |
8ceee660 | 1324 | |
4a5b504d BH |
1325 | kfree(nvconfig); |
1326 | return 0; | |
1327 | ||
1328 | fail2: | |
1329 | falcon_remove_spi_devices(efx); | |
1330 | fail1: | |
8ceee660 BH |
1331 | kfree(nvconfig); |
1332 | return rc; | |
1333 | } | |
1334 | ||
4a5b504d BH |
1335 | /* Probe all SPI devices on the NIC */ |
1336 | static void falcon_probe_spi_devices(struct efx_nic *efx) | |
1337 | { | |
1338 | efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg; | |
2f7f5730 | 1339 | int boot_dev; |
4a5b504d | 1340 | |
12d00cad BH |
1341 | efx_reado(efx, &gpio_ctl, FR_AB_GPIO_CTL); |
1342 | efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); | |
1343 | efx_reado(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0); | |
4a5b504d | 1344 | |
3e6c4538 BH |
1345 | if (EFX_OWORD_FIELD(gpio_ctl, FRF_AB_GPIO3_PWRUP_VALUE)) { |
1346 | boot_dev = (EFX_OWORD_FIELD(nic_stat, FRF_AB_SF_PRST) ? | |
1347 | FFE_AB_SPI_DEVICE_FLASH : FFE_AB_SPI_DEVICE_EEPROM); | |
2f7f5730 | 1348 | EFX_LOG(efx, "Booted from %s\n", |
3e6c4538 | 1349 | boot_dev == FFE_AB_SPI_DEVICE_FLASH ? "flash" : "EEPROM"); |
2f7f5730 BH |
1350 | } else { |
1351 | /* Disable VPD and set clock dividers to safe | |
1352 | * values for initial programming. */ | |
1353 | boot_dev = -1; | |
1354 | EFX_LOG(efx, "Booted from internal ASIC settings;" | |
1355 | " setting SPI config\n"); | |
3e6c4538 | 1356 | EFX_POPULATE_OWORD_3(ee_vpd_cfg, FRF_AB_EE_VPD_EN, 0, |
2f7f5730 | 1357 | /* 125 MHz / 7 ~= 20 MHz */ |
3e6c4538 | 1358 | FRF_AB_EE_SF_CLOCK_DIV, 7, |
2f7f5730 | 1359 | /* 125 MHz / 63 ~= 2 MHz */ |
3e6c4538 | 1360 | FRF_AB_EE_EE_CLOCK_DIV, 63); |
12d00cad | 1361 | efx_writeo(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0); |
4a5b504d BH |
1362 | } |
1363 | ||
3e6c4538 BH |
1364 | if (boot_dev == FFE_AB_SPI_DEVICE_FLASH) |
1365 | falcon_spi_device_init(efx, &efx->spi_flash, | |
1366 | FFE_AB_SPI_DEVICE_FLASH, | |
2f7f5730 | 1367 | default_flash_type); |
3e6c4538 BH |
1368 | if (boot_dev == FFE_AB_SPI_DEVICE_EEPROM) |
1369 | falcon_spi_device_init(efx, &efx->spi_eeprom, | |
1370 | FFE_AB_SPI_DEVICE_EEPROM, | |
2f7f5730 | 1371 | large_eeprom_type); |
4a5b504d BH |
1372 | } |
1373 | ||
ef2b90ee | 1374 | static int falcon_probe_nic(struct efx_nic *efx) |
8ceee660 BH |
1375 | { |
1376 | struct falcon_nic_data *nic_data; | |
e775fb93 | 1377 | struct falcon_board *board; |
8ceee660 BH |
1378 | int rc; |
1379 | ||
8ceee660 BH |
1380 | /* Allocate storage for hardware specific data */ |
1381 | nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL); | |
88c59425 BH |
1382 | if (!nic_data) |
1383 | return -ENOMEM; | |
5daab96d | 1384 | efx->nic_data = nic_data; |
8ceee660 | 1385 | |
57849460 BH |
1386 | rc = -ENODEV; |
1387 | ||
1388 | if (efx_nic_fpga_ver(efx) != 0) { | |
1389 | EFX_ERR(efx, "Falcon FPGA not supported\n"); | |
8ceee660 | 1390 | goto fail1; |
57849460 BH |
1391 | } |
1392 | ||
1393 | if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) { | |
1394 | efx_oword_t nic_stat; | |
1395 | struct pci_dev *dev; | |
1396 | u8 pci_rev = efx->pci_dev->revision; | |
8ceee660 | 1397 | |
57849460 BH |
1398 | if ((pci_rev == 0xff) || (pci_rev == 0)) { |
1399 | EFX_ERR(efx, "Falcon rev A0 not supported\n"); | |
1400 | goto fail1; | |
1401 | } | |
1402 | efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); | |
1403 | if (EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_10G) == 0) { | |
1404 | EFX_ERR(efx, "Falcon rev A1 1G not supported\n"); | |
1405 | goto fail1; | |
1406 | } | |
1407 | if (EFX_OWORD_FIELD(nic_stat, FRF_AA_STRAP_PCIE) == 0) { | |
1408 | EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n"); | |
1409 | goto fail1; | |
1410 | } | |
8ceee660 | 1411 | |
57849460 | 1412 | dev = pci_dev_get(efx->pci_dev); |
8ceee660 BH |
1413 | while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID, |
1414 | dev))) { | |
1415 | if (dev->bus == efx->pci_dev->bus && | |
1416 | dev->devfn == efx->pci_dev->devfn + 1) { | |
1417 | nic_data->pci_dev2 = dev; | |
1418 | break; | |
1419 | } | |
1420 | } | |
1421 | if (!nic_data->pci_dev2) { | |
1422 | EFX_ERR(efx, "failed to find secondary function\n"); | |
1423 | rc = -ENODEV; | |
1424 | goto fail2; | |
1425 | } | |
1426 | } | |
1427 | ||
1428 | /* Now we can reset the NIC */ | |
1429 | rc = falcon_reset_hw(efx, RESET_TYPE_ALL); | |
1430 | if (rc) { | |
1431 | EFX_ERR(efx, "failed to reset NIC\n"); | |
1432 | goto fail3; | |
1433 | } | |
1434 | ||
1435 | /* Allocate memory for INT_KER */ | |
152b6a62 | 1436 | rc = efx_nic_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t)); |
8ceee660 BH |
1437 | if (rc) |
1438 | goto fail4; | |
1439 | BUG_ON(efx->irq_status.dma_addr & 0x0f); | |
1440 | ||
9c8976a1 JSR |
1441 | EFX_LOG(efx, "INT_KER at %llx (virt %p phys %llx)\n", |
1442 | (u64)efx->irq_status.dma_addr, | |
1443 | efx->irq_status.addr, (u64)virt_to_phys(efx->irq_status.addr)); | |
8ceee660 | 1444 | |
4a5b504d BH |
1445 | falcon_probe_spi_devices(efx); |
1446 | ||
8ceee660 BH |
1447 | /* Read in the non-volatile configuration */ |
1448 | rc = falcon_probe_nvconfig(efx); | |
1449 | if (rc) | |
1450 | goto fail5; | |
1451 | ||
37b5a603 | 1452 | /* Initialise I2C adapter */ |
e775fb93 BH |
1453 | board = falcon_board(efx); |
1454 | board->i2c_adap.owner = THIS_MODULE; | |
1455 | board->i2c_data = falcon_i2c_bit_operations; | |
1456 | board->i2c_data.data = efx; | |
1457 | board->i2c_adap.algo_data = &board->i2c_data; | |
1458 | board->i2c_adap.dev.parent = &efx->pci_dev->dev; | |
1459 | strlcpy(board->i2c_adap.name, "SFC4000 GPIO", | |
1460 | sizeof(board->i2c_adap.name)); | |
1461 | rc = i2c_bit_add_bus(&board->i2c_adap); | |
37b5a603 BH |
1462 | if (rc) |
1463 | goto fail5; | |
1464 | ||
44838a44 | 1465 | rc = falcon_board(efx)->type->init(efx); |
278c0621 BH |
1466 | if (rc) { |
1467 | EFX_ERR(efx, "failed to initialise board\n"); | |
1468 | goto fail6; | |
1469 | } | |
1470 | ||
55edc6e6 BH |
1471 | nic_data->stats_disable_count = 1; |
1472 | setup_timer(&nic_data->stats_timer, &falcon_stats_timer_func, | |
1473 | (unsigned long)efx); | |
1474 | ||
8ceee660 BH |
1475 | return 0; |
1476 | ||
278c0621 | 1477 | fail6: |
e775fb93 BH |
1478 | BUG_ON(i2c_del_adapter(&board->i2c_adap)); |
1479 | memset(&board->i2c_adap, 0, sizeof(board->i2c_adap)); | |
8ceee660 | 1480 | fail5: |
4a5b504d | 1481 | falcon_remove_spi_devices(efx); |
152b6a62 | 1482 | efx_nic_free_buffer(efx, &efx->irq_status); |
8ceee660 | 1483 | fail4: |
8ceee660 BH |
1484 | fail3: |
1485 | if (nic_data->pci_dev2) { | |
1486 | pci_dev_put(nic_data->pci_dev2); | |
1487 | nic_data->pci_dev2 = NULL; | |
1488 | } | |
1489 | fail2: | |
8ceee660 BH |
1490 | fail1: |
1491 | kfree(efx->nic_data); | |
1492 | return rc; | |
1493 | } | |
1494 | ||
56241ceb BH |
1495 | static void falcon_init_rx_cfg(struct efx_nic *efx) |
1496 | { | |
1497 | /* Prior to Siena the RX DMA engine will split each frame at | |
1498 | * intervals of RX_USR_BUF_SIZE (32-byte units). We set it to | |
1499 | * be so large that that never happens. */ | |
1500 | const unsigned huge_buf_size = (3 * 4096) >> 5; | |
1501 | /* RX control FIFO thresholds (32 entries) */ | |
1502 | const unsigned ctrl_xon_thr = 20; | |
1503 | const unsigned ctrl_xoff_thr = 25; | |
1504 | /* RX data FIFO thresholds (256-byte units; size varies) */ | |
152b6a62 BH |
1505 | int data_xon_thr = efx_nic_rx_xon_thresh >> 8; |
1506 | int data_xoff_thr = efx_nic_rx_xoff_thresh >> 8; | |
56241ceb BH |
1507 | efx_oword_t reg; |
1508 | ||
12d00cad | 1509 | efx_reado(efx, ®, FR_AZ_RX_CFG); |
daeda630 | 1510 | if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) { |
625b4514 BH |
1511 | /* Data FIFO size is 5.5K */ |
1512 | if (data_xon_thr < 0) | |
1513 | data_xon_thr = 512 >> 8; | |
1514 | if (data_xoff_thr < 0) | |
1515 | data_xoff_thr = 2048 >> 8; | |
3e6c4538 BH |
1516 | EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_DESC_PUSH_EN, 0); |
1517 | EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_USR_BUF_SIZE, | |
1518 | huge_buf_size); | |
1519 | EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_MAC_TH, data_xon_thr); | |
1520 | EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_MAC_TH, data_xoff_thr); | |
1521 | EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_TX_TH, ctrl_xon_thr); | |
1522 | EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_TX_TH, ctrl_xoff_thr); | |
56241ceb | 1523 | } else { |
625b4514 BH |
1524 | /* Data FIFO size is 80K; register fields moved */ |
1525 | if (data_xon_thr < 0) | |
1526 | data_xon_thr = 27648 >> 8; /* ~3*max MTU */ | |
1527 | if (data_xoff_thr < 0) | |
1528 | data_xoff_thr = 54272 >> 8; /* ~80Kb - 3*max MTU */ | |
3e6c4538 BH |
1529 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_DESC_PUSH_EN, 0); |
1530 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_USR_BUF_SIZE, | |
1531 | huge_buf_size); | |
1532 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_MAC_TH, data_xon_thr); | |
1533 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_MAC_TH, data_xoff_thr); | |
1534 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_TX_TH, ctrl_xon_thr); | |
1535 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_TX_TH, ctrl_xoff_thr); | |
1536 | EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1); | |
56241ceb | 1537 | } |
4b0d29dc BH |
1538 | /* Always enable XOFF signal from RX FIFO. We enable |
1539 | * or disable transmission of pause frames at the MAC. */ | |
1540 | EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1); | |
12d00cad | 1541 | efx_writeo(efx, ®, FR_AZ_RX_CFG); |
56241ceb BH |
1542 | } |
1543 | ||
152b6a62 BH |
1544 | /* This call performs hardware-specific global initialisation, such as |
1545 | * defining the descriptor cache sizes and number of RSS channels. | |
1546 | * It does not set up any buffers, descriptor rings or event queues. | |
1547 | */ | |
1548 | static int falcon_init_nic(struct efx_nic *efx) | |
1549 | { | |
1550 | efx_oword_t temp; | |
1551 | int rc; | |
1552 | ||
1553 | /* Use on-chip SRAM */ | |
1554 | efx_reado(efx, &temp, FR_AB_NIC_STAT); | |
1555 | EFX_SET_OWORD_FIELD(temp, FRF_AB_ONCHIP_SRAM, 1); | |
1556 | efx_writeo(efx, &temp, FR_AB_NIC_STAT); | |
1557 | ||
1558 | /* Set the source of the GMAC clock */ | |
1559 | if (efx_nic_rev(efx) == EFX_REV_FALCON_B0) { | |
1560 | efx_reado(efx, &temp, FR_AB_GPIO_CTL); | |
1561 | EFX_SET_OWORD_FIELD(temp, FRF_AB_USE_NIC_CLK, true); | |
1562 | efx_writeo(efx, &temp, FR_AB_GPIO_CTL); | |
1563 | } | |
1564 | ||
1565 | /* Select the correct MAC */ | |
1566 | falcon_clock_mac(efx); | |
1567 | ||
1568 | rc = falcon_reset_sram(efx); | |
1569 | if (rc) | |
1570 | return rc; | |
1571 | ||
1572 | /* Clear the parity enables on the TX data fifos as | |
1573 | * they produce false parity errors because of timing issues | |
1574 | */ | |
1575 | if (EFX_WORKAROUND_5129(efx)) { | |
1576 | efx_reado(efx, &temp, FR_AZ_CSR_SPARE); | |
1577 | EFX_SET_OWORD_FIELD(temp, FRF_AB_MEM_PERR_EN_TX_DATA, 0); | |
1578 | efx_writeo(efx, &temp, FR_AZ_CSR_SPARE); | |
1579 | } | |
1580 | ||
8ceee660 | 1581 | if (EFX_WORKAROUND_7244(efx)) { |
12d00cad | 1582 | efx_reado(efx, &temp, FR_BZ_RX_FILTER_CTL); |
3e6c4538 BH |
1583 | EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_FULL_SRCH_LIMIT, 8); |
1584 | EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_WILD_SRCH_LIMIT, 8); | |
1585 | EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_FULL_SRCH_LIMIT, 8); | |
1586 | EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_WILD_SRCH_LIMIT, 8); | |
12d00cad | 1587 | efx_writeo(efx, &temp, FR_BZ_RX_FILTER_CTL); |
8ceee660 | 1588 | } |
8ceee660 | 1589 | |
3e6c4538 | 1590 | /* XXX This is documented only for Falcon A0/A1 */ |
8ceee660 BH |
1591 | /* Setup RX. Wait for descriptor is broken and must |
1592 | * be disabled. RXDP recovery shouldn't be needed, but is. | |
1593 | */ | |
12d00cad | 1594 | efx_reado(efx, &temp, FR_AA_RX_SELF_RST); |
3e6c4538 BH |
1595 | EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_NODESC_WAIT_DIS, 1); |
1596 | EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_SELF_RST_EN, 1); | |
8ceee660 | 1597 | if (EFX_WORKAROUND_5583(efx)) |
3e6c4538 | 1598 | EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_ISCSI_DIS, 1); |
12d00cad | 1599 | efx_writeo(efx, &temp, FR_AA_RX_SELF_RST); |
8ceee660 | 1600 | |
8ceee660 BH |
1601 | /* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16 |
1602 | * descriptors (which is bad). | |
1603 | */ | |
12d00cad | 1604 | efx_reado(efx, &temp, FR_AZ_TX_CFG); |
3e6c4538 | 1605 | EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_NO_EOP_DISC_EN, 0); |
12d00cad | 1606 | efx_writeo(efx, &temp, FR_AZ_TX_CFG); |
8ceee660 | 1607 | |
56241ceb | 1608 | falcon_init_rx_cfg(efx); |
8ceee660 BH |
1609 | |
1610 | /* Set destination of both TX and RX Flush events */ | |
daeda630 | 1611 | if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { |
3e6c4538 | 1612 | EFX_POPULATE_OWORD_1(temp, FRF_BZ_FLS_EVQ_ID, 0); |
12d00cad | 1613 | efx_writeo(efx, &temp, FR_BZ_DP_CTRL); |
8ceee660 BH |
1614 | } |
1615 | ||
152b6a62 BH |
1616 | efx_nic_init_common(efx); |
1617 | ||
8ceee660 BH |
1618 | return 0; |
1619 | } | |
1620 | ||
ef2b90ee | 1621 | static void falcon_remove_nic(struct efx_nic *efx) |
8ceee660 BH |
1622 | { |
1623 | struct falcon_nic_data *nic_data = efx->nic_data; | |
e775fb93 | 1624 | struct falcon_board *board = falcon_board(efx); |
37b5a603 BH |
1625 | int rc; |
1626 | ||
44838a44 | 1627 | board->type->fini(efx); |
278c0621 | 1628 | |
8c870379 | 1629 | /* Remove I2C adapter and clear it in preparation for a retry */ |
e775fb93 | 1630 | rc = i2c_del_adapter(&board->i2c_adap); |
37b5a603 | 1631 | BUG_ON(rc); |
e775fb93 | 1632 | memset(&board->i2c_adap, 0, sizeof(board->i2c_adap)); |
8ceee660 | 1633 | |
4a5b504d | 1634 | falcon_remove_spi_devices(efx); |
152b6a62 | 1635 | efx_nic_free_buffer(efx, &efx->irq_status); |
8ceee660 | 1636 | |
91ad757c | 1637 | falcon_reset_hw(efx, RESET_TYPE_ALL); |
8ceee660 BH |
1638 | |
1639 | /* Release the second function after the reset */ | |
1640 | if (nic_data->pci_dev2) { | |
1641 | pci_dev_put(nic_data->pci_dev2); | |
1642 | nic_data->pci_dev2 = NULL; | |
1643 | } | |
1644 | ||
1645 | /* Tear down the private nic state */ | |
1646 | kfree(efx->nic_data); | |
1647 | efx->nic_data = NULL; | |
1648 | } | |
1649 | ||
ef2b90ee | 1650 | static void falcon_update_nic_stats(struct efx_nic *efx) |
8ceee660 | 1651 | { |
55edc6e6 | 1652 | struct falcon_nic_data *nic_data = efx->nic_data; |
8ceee660 BH |
1653 | efx_oword_t cnt; |
1654 | ||
55edc6e6 BH |
1655 | if (nic_data->stats_disable_count) |
1656 | return; | |
1657 | ||
12d00cad | 1658 | efx_reado(efx, &cnt, FR_AZ_RX_NODESC_DROP); |
3e6c4538 BH |
1659 | efx->n_rx_nodesc_drop_cnt += |
1660 | EFX_OWORD_FIELD(cnt, FRF_AB_RX_NODESC_DROP_CNT); | |
55edc6e6 BH |
1661 | |
1662 | if (nic_data->stats_pending && | |
1663 | *nic_data->stats_dma_done == FALCON_STATS_DONE) { | |
1664 | nic_data->stats_pending = false; | |
1665 | rmb(); /* read the done flag before the stats */ | |
1666 | efx->mac_op->update_stats(efx); | |
1667 | } | |
1668 | } | |
1669 | ||
1670 | void falcon_start_nic_stats(struct efx_nic *efx) | |
1671 | { | |
1672 | struct falcon_nic_data *nic_data = efx->nic_data; | |
1673 | ||
1674 | spin_lock_bh(&efx->stats_lock); | |
1675 | if (--nic_data->stats_disable_count == 0) | |
1676 | falcon_stats_request(efx); | |
1677 | spin_unlock_bh(&efx->stats_lock); | |
1678 | } | |
1679 | ||
1680 | void falcon_stop_nic_stats(struct efx_nic *efx) | |
1681 | { | |
1682 | struct falcon_nic_data *nic_data = efx->nic_data; | |
1683 | int i; | |
1684 | ||
1685 | might_sleep(); | |
1686 | ||
1687 | spin_lock_bh(&efx->stats_lock); | |
1688 | ++nic_data->stats_disable_count; | |
1689 | spin_unlock_bh(&efx->stats_lock); | |
1690 | ||
1691 | del_timer_sync(&nic_data->stats_timer); | |
1692 | ||
1693 | /* Wait enough time for the most recent transfer to | |
1694 | * complete. */ | |
1695 | for (i = 0; i < 4 && nic_data->stats_pending; i++) { | |
1696 | if (*nic_data->stats_dma_done == FALCON_STATS_DONE) | |
1697 | break; | |
1698 | msleep(1); | |
1699 | } | |
1700 | ||
1701 | spin_lock_bh(&efx->stats_lock); | |
1702 | falcon_stats_complete(efx); | |
1703 | spin_unlock_bh(&efx->stats_lock); | |
8ceee660 BH |
1704 | } |
1705 | ||
06629f07 BH |
1706 | static void falcon_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) |
1707 | { | |
1708 | falcon_board(efx)->type->set_id_led(efx, mode); | |
1709 | } | |
1710 | ||
89c758fa BH |
1711 | /************************************************************************** |
1712 | * | |
1713 | * Wake on LAN | |
1714 | * | |
1715 | ************************************************************************** | |
1716 | */ | |
1717 | ||
1718 | static void falcon_get_wol(struct efx_nic *efx, struct ethtool_wolinfo *wol) | |
1719 | { | |
1720 | wol->supported = 0; | |
1721 | wol->wolopts = 0; | |
1722 | memset(&wol->sopass, 0, sizeof(wol->sopass)); | |
1723 | } | |
1724 | ||
1725 | static int falcon_set_wol(struct efx_nic *efx, u32 type) | |
1726 | { | |
1727 | if (type != 0) | |
1728 | return -EINVAL; | |
1729 | return 0; | |
1730 | } | |
1731 | ||
8ceee660 BH |
1732 | /************************************************************************** |
1733 | * | |
754c653a | 1734 | * Revision-dependent attributes used by efx.c and nic.c |
8ceee660 BH |
1735 | * |
1736 | ************************************************************************** | |
1737 | */ | |
1738 | ||
daeda630 | 1739 | struct efx_nic_type falcon_a1_nic_type = { |
ef2b90ee BH |
1740 | .probe = falcon_probe_nic, |
1741 | .remove = falcon_remove_nic, | |
1742 | .init = falcon_init_nic, | |
1743 | .fini = efx_port_dummy_op_void, | |
1744 | .monitor = falcon_monitor, | |
1745 | .reset = falcon_reset_hw, | |
1746 | .probe_port = falcon_probe_port, | |
1747 | .remove_port = falcon_remove_port, | |
1748 | .prepare_flush = falcon_prepare_flush, | |
1749 | .update_stats = falcon_update_nic_stats, | |
1750 | .start_stats = falcon_start_nic_stats, | |
1751 | .stop_stats = falcon_stop_nic_stats, | |
06629f07 | 1752 | .set_id_led = falcon_set_id_led, |
ef2b90ee BH |
1753 | .push_irq_moderation = falcon_push_irq_moderation, |
1754 | .push_multicast_hash = falcon_push_multicast_hash, | |
d3245b28 | 1755 | .reconfigure_port = falcon_reconfigure_port, |
89c758fa BH |
1756 | .get_wol = falcon_get_wol, |
1757 | .set_wol = falcon_set_wol, | |
1758 | .resume_wol = efx_port_dummy_op_void, | |
0aa3fbaa | 1759 | .test_nvram = falcon_test_nvram, |
b895d73e SH |
1760 | .default_mac_ops = &falcon_xmac_operations, |
1761 | ||
daeda630 | 1762 | .revision = EFX_REV_FALCON_A1, |
8ceee660 | 1763 | .mem_map_size = 0x20000, |
3e6c4538 BH |
1764 | .txd_ptr_tbl_base = FR_AA_TX_DESC_PTR_TBL_KER, |
1765 | .rxd_ptr_tbl_base = FR_AA_RX_DESC_PTR_TBL_KER, | |
1766 | .buf_tbl_base = FR_AA_BUF_FULL_TBL_KER, | |
1767 | .evq_ptr_tbl_base = FR_AA_EVQ_PTR_TBL_KER, | |
1768 | .evq_rptr_tbl_base = FR_AA_EVQ_RPTR_KER, | |
6d51d307 | 1769 | .max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH), |
8ceee660 BH |
1770 | .rx_buffer_padding = 0x24, |
1771 | .max_interrupt_mode = EFX_INT_MODE_MSI, | |
1772 | .phys_addr_channels = 4, | |
0228f5cd BH |
1773 | .tx_dc_base = 0x130000, |
1774 | .rx_dc_base = 0x100000, | |
c383b537 | 1775 | .offload_features = NETIF_F_IP_CSUM, |
eb9f6744 | 1776 | .reset_world_flags = ETH_RESET_IRQ, |
8ceee660 BH |
1777 | }; |
1778 | ||
daeda630 | 1779 | struct efx_nic_type falcon_b0_nic_type = { |
ef2b90ee BH |
1780 | .probe = falcon_probe_nic, |
1781 | .remove = falcon_remove_nic, | |
1782 | .init = falcon_init_nic, | |
1783 | .fini = efx_port_dummy_op_void, | |
1784 | .monitor = falcon_monitor, | |
1785 | .reset = falcon_reset_hw, | |
1786 | .probe_port = falcon_probe_port, | |
1787 | .remove_port = falcon_remove_port, | |
1788 | .prepare_flush = falcon_prepare_flush, | |
1789 | .update_stats = falcon_update_nic_stats, | |
1790 | .start_stats = falcon_start_nic_stats, | |
1791 | .stop_stats = falcon_stop_nic_stats, | |
06629f07 | 1792 | .set_id_led = falcon_set_id_led, |
ef2b90ee BH |
1793 | .push_irq_moderation = falcon_push_irq_moderation, |
1794 | .push_multicast_hash = falcon_push_multicast_hash, | |
d3245b28 | 1795 | .reconfigure_port = falcon_reconfigure_port, |
89c758fa BH |
1796 | .get_wol = falcon_get_wol, |
1797 | .set_wol = falcon_set_wol, | |
1798 | .resume_wol = efx_port_dummy_op_void, | |
9bfc4bb1 | 1799 | .test_registers = falcon_b0_test_registers, |
0aa3fbaa | 1800 | .test_nvram = falcon_test_nvram, |
b895d73e SH |
1801 | .default_mac_ops = &falcon_xmac_operations, |
1802 | ||
daeda630 | 1803 | .revision = EFX_REV_FALCON_B0, |
8ceee660 BH |
1804 | /* Map everything up to and including the RSS indirection |
1805 | * table. Don't map MSI-X table, MSI-X PBA since Linux | |
1806 | * requires that they not be mapped. */ | |
3e6c4538 BH |
1807 | .mem_map_size = (FR_BZ_RX_INDIRECTION_TBL + |
1808 | FR_BZ_RX_INDIRECTION_TBL_STEP * | |
1809 | FR_BZ_RX_INDIRECTION_TBL_ROWS), | |
1810 | .txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL, | |
1811 | .rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL, | |
1812 | .buf_tbl_base = FR_BZ_BUF_FULL_TBL, | |
1813 | .evq_ptr_tbl_base = FR_BZ_EVQ_PTR_TBL, | |
1814 | .evq_rptr_tbl_base = FR_BZ_EVQ_RPTR, | |
6d51d307 | 1815 | .max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH), |
8ceee660 BH |
1816 | .rx_buffer_padding = 0, |
1817 | .max_interrupt_mode = EFX_INT_MODE_MSIX, | |
1818 | .phys_addr_channels = 32, /* Hardware limit is 64, but the legacy | |
1819 | * interrupt handler only supports 32 | |
1820 | * channels */ | |
0228f5cd BH |
1821 | .tx_dc_base = 0x130000, |
1822 | .rx_dc_base = 0x100000, | |
c383b537 | 1823 | .offload_features = NETIF_F_IP_CSUM, |
eb9f6744 | 1824 | .reset_world_flags = ETH_RESET_IRQ, |
8ceee660 BH |
1825 | }; |
1826 |