Commit | Line | Data |
---|---|---|
8ceee660 BH |
1 | /**************************************************************************** |
2 | * Driver for Solarflare Solarstorm network controllers and boards | |
3 | * Copyright 2005-2006 Fen Systems Ltd. | |
4 | * Copyright 2005-2008 Solarflare Communications Inc. | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify it | |
7 | * under the terms of the GNU General Public License version 2 as published | |
8 | * by the Free Software Foundation, incorporated herein by reference. | |
9 | */ | |
10 | ||
11 | #include <linux/module.h> | |
12 | #include <linux/pci.h> | |
13 | #include <linux/netdevice.h> | |
14 | #include <linux/etherdevice.h> | |
15 | #include <linux/delay.h> | |
16 | #include <linux/notifier.h> | |
17 | #include <linux/ip.h> | |
18 | #include <linux/tcp.h> | |
19 | #include <linux/in.h> | |
20 | #include <linux/crc32.h> | |
21 | #include <linux/ethtool.h> | |
22 | #include "net_driver.h" | |
23 | #include "gmii.h" | |
24 | #include "ethtool.h" | |
25 | #include "tx.h" | |
26 | #include "rx.h" | |
27 | #include "efx.h" | |
28 | #include "mdio_10g.h" | |
29 | #include "falcon.h" | |
30 | #include "workarounds.h" | |
31 | #include "mac.h" | |
32 | ||
33 | #define EFX_MAX_MTU (9 * 1024) | |
34 | ||
35 | /* RX slow fill workqueue. If memory allocation fails in the fast path, | |
36 | * a work item is pushed onto this work queue to retry the allocation later, | |
37 | * to avoid the NIC being starved of RX buffers. Since this is a per cpu | |
38 | * workqueue, there is nothing to be gained in making it per NIC | |
39 | */ | |
40 | static struct workqueue_struct *refill_workqueue; | |
41 | ||
42 | /************************************************************************** | |
43 | * | |
44 | * Configurable values | |
45 | * | |
46 | *************************************************************************/ | |
47 | ||
48 | /* | |
49 | * Enable large receive offload (LRO) aka soft segment reassembly (SSR) | |
50 | * | |
51 | * This sets the default for new devices. It can be controlled later | |
52 | * using ethtool. | |
53 | */ | |
54 | static int lro = 1; | |
55 | module_param(lro, int, 0644); | |
56 | MODULE_PARM_DESC(lro, "Large receive offload acceleration"); | |
57 | ||
58 | /* | |
59 | * Use separate channels for TX and RX events | |
60 | * | |
61 | * Set this to 1 to use separate channels for TX and RX. It allows us to | |
62 | * apply a higher level of interrupt moderation to TX events. | |
63 | * | |
64 | * This is forced to 0 for MSI interrupt mode as the interrupt vector | |
65 | * is not written | |
66 | */ | |
67 | static unsigned int separate_tx_and_rx_channels = 1; | |
68 | ||
69 | /* This is the weight assigned to each of the (per-channel) virtual | |
70 | * NAPI devices. | |
71 | */ | |
72 | static int napi_weight = 64; | |
73 | ||
74 | /* This is the time (in jiffies) between invocations of the hardware | |
75 | * monitor, which checks for known hardware bugs and resets the | |
76 | * hardware and driver as necessary. | |
77 | */ | |
78 | unsigned int efx_monitor_interval = 1 * HZ; | |
79 | ||
80 | /* This controls whether or not the hardware monitor will trigger a | |
81 | * reset when it detects an error condition. | |
82 | */ | |
83 | static unsigned int monitor_reset = 1; | |
84 | ||
85 | /* This controls whether or not the driver will initialise devices | |
86 | * with invalid MAC addresses stored in the EEPROM or flash. If true, | |
87 | * such devices will be initialised with a random locally-generated | |
88 | * MAC address. This allows for loading the sfc_mtd driver to | |
89 | * reprogram the flash, even if the flash contents (including the MAC | |
90 | * address) have previously been erased. | |
91 | */ | |
92 | static unsigned int allow_bad_hwaddr; | |
93 | ||
94 | /* Initial interrupt moderation settings. They can be modified after | |
95 | * module load with ethtool. | |
96 | * | |
97 | * The default for RX should strike a balance between increasing the | |
98 | * round-trip latency and reducing overhead. | |
99 | */ | |
100 | static unsigned int rx_irq_mod_usec = 60; | |
101 | ||
102 | /* Initial interrupt moderation settings. They can be modified after | |
103 | * module load with ethtool. | |
104 | * | |
105 | * This default is chosen to ensure that a 10G link does not go idle | |
106 | * while a TX queue is stopped after it has become full. A queue is | |
107 | * restarted when it drops below half full. The time this takes (assuming | |
108 | * worst case 3 descriptors per packet and 1024 descriptors) is | |
109 | * 512 / 3 * 1.2 = 205 usec. | |
110 | */ | |
111 | static unsigned int tx_irq_mod_usec = 150; | |
112 | ||
113 | /* This is the first interrupt mode to try out of: | |
114 | * 0 => MSI-X | |
115 | * 1 => MSI | |
116 | * 2 => legacy | |
117 | */ | |
118 | static unsigned int interrupt_mode; | |
119 | ||
120 | /* This is the requested number of CPUs to use for Receive-Side Scaling (RSS), | |
121 | * i.e. the number of CPUs among which we may distribute simultaneous | |
122 | * interrupt handling. | |
123 | * | |
124 | * Cards without MSI-X will only target one CPU via legacy or MSI interrupt. | |
125 | * The default (0) means to assign an interrupt to each package (level II cache) | |
126 | */ | |
127 | static unsigned int rss_cpus; | |
128 | module_param(rss_cpus, uint, 0444); | |
129 | MODULE_PARM_DESC(rss_cpus, "Number of CPUs to use for Receive-Side Scaling"); | |
130 | ||
131 | /************************************************************************** | |
132 | * | |
133 | * Utility functions and prototypes | |
134 | * | |
135 | *************************************************************************/ | |
136 | static void efx_remove_channel(struct efx_channel *channel); | |
137 | static void efx_remove_port(struct efx_nic *efx); | |
138 | static void efx_fini_napi(struct efx_nic *efx); | |
139 | static void efx_fini_channels(struct efx_nic *efx); | |
140 | ||
141 | #define EFX_ASSERT_RESET_SERIALISED(efx) \ | |
142 | do { \ | |
143 | if ((efx->state == STATE_RUNNING) || \ | |
144 | (efx->state == STATE_RESETTING)) \ | |
145 | ASSERT_RTNL(); \ | |
146 | } while (0) | |
147 | ||
148 | /************************************************************************** | |
149 | * | |
150 | * Event queue processing | |
151 | * | |
152 | *************************************************************************/ | |
153 | ||
154 | /* Process channel's event queue | |
155 | * | |
156 | * This function is responsible for processing the event queue of a | |
157 | * single channel. The caller must guarantee that this function will | |
158 | * never be concurrently called more than once on the same channel, | |
159 | * though different channels may be being processed concurrently. | |
160 | */ | |
161 | static inline int efx_process_channel(struct efx_channel *channel, int rx_quota) | |
162 | { | |
163 | int rxdmaqs; | |
164 | struct efx_rx_queue *rx_queue; | |
165 | ||
166 | if (unlikely(channel->efx->reset_pending != RESET_TYPE_NONE || | |
167 | !channel->enabled)) | |
168 | return rx_quota; | |
169 | ||
170 | rxdmaqs = falcon_process_eventq(channel, &rx_quota); | |
171 | ||
172 | /* Deliver last RX packet. */ | |
173 | if (channel->rx_pkt) { | |
174 | __efx_rx_packet(channel, channel->rx_pkt, | |
175 | channel->rx_pkt_csummed); | |
176 | channel->rx_pkt = NULL; | |
177 | } | |
178 | ||
179 | efx_flush_lro(channel); | |
180 | efx_rx_strategy(channel); | |
181 | ||
182 | /* Refill descriptor rings as necessary */ | |
183 | rx_queue = &channel->efx->rx_queue[0]; | |
184 | while (rxdmaqs) { | |
185 | if (rxdmaqs & 0x01) | |
186 | efx_fast_push_rx_descriptors(rx_queue); | |
187 | rx_queue++; | |
188 | rxdmaqs >>= 1; | |
189 | } | |
190 | ||
191 | return rx_quota; | |
192 | } | |
193 | ||
194 | /* Mark channel as finished processing | |
195 | * | |
196 | * Note that since we will not receive further interrupts for this | |
197 | * channel before we finish processing and call the eventq_read_ack() | |
198 | * method, there is no need to use the interrupt hold-off timers. | |
199 | */ | |
200 | static inline void efx_channel_processed(struct efx_channel *channel) | |
201 | { | |
202 | /* Write to EVQ_RPTR_REG. If a new event arrived in a race | |
203 | * with finishing processing, a new interrupt will be raised. | |
204 | */ | |
205 | channel->work_pending = 0; | |
206 | smp_wmb(); /* Ensure channel updated before any new interrupt. */ | |
207 | falcon_eventq_read_ack(channel); | |
208 | } | |
209 | ||
210 | /* NAPI poll handler | |
211 | * | |
212 | * NAPI guarantees serialisation of polls of the same device, which | |
213 | * provides the guarantee required by efx_process_channel(). | |
214 | */ | |
215 | static int efx_poll(struct napi_struct *napi, int budget) | |
216 | { | |
217 | struct efx_channel *channel = | |
218 | container_of(napi, struct efx_channel, napi_str); | |
219 | struct net_device *napi_dev = channel->napi_dev; | |
220 | int unused; | |
221 | int rx_packets; | |
222 | ||
223 | EFX_TRACE(channel->efx, "channel %d NAPI poll executing on CPU %d\n", | |
224 | channel->channel, raw_smp_processor_id()); | |
225 | ||
226 | unused = efx_process_channel(channel, budget); | |
227 | rx_packets = (budget - unused); | |
228 | ||
229 | if (rx_packets < budget) { | |
230 | /* There is no race here; although napi_disable() will | |
231 | * only wait for netif_rx_complete(), this isn't a problem | |
232 | * since efx_channel_processed() will have no effect if | |
233 | * interrupts have already been disabled. | |
234 | */ | |
235 | netif_rx_complete(napi_dev, napi); | |
236 | efx_channel_processed(channel); | |
237 | } | |
238 | ||
239 | return rx_packets; | |
240 | } | |
241 | ||
242 | /* Process the eventq of the specified channel immediately on this CPU | |
243 | * | |
244 | * Disable hardware generated interrupts, wait for any existing | |
245 | * processing to finish, then directly poll (and ack ) the eventq. | |
246 | * Finally reenable NAPI and interrupts. | |
247 | * | |
248 | * Since we are touching interrupts the caller should hold the suspend lock | |
249 | */ | |
250 | void efx_process_channel_now(struct efx_channel *channel) | |
251 | { | |
252 | struct efx_nic *efx = channel->efx; | |
253 | ||
254 | BUG_ON(!channel->used_flags); | |
255 | BUG_ON(!channel->enabled); | |
256 | ||
257 | /* Disable interrupts and wait for ISRs to complete */ | |
258 | falcon_disable_interrupts(efx); | |
259 | if (efx->legacy_irq) | |
260 | synchronize_irq(efx->legacy_irq); | |
261 | if (channel->has_interrupt && channel->irq) | |
262 | synchronize_irq(channel->irq); | |
263 | ||
264 | /* Wait for any NAPI processing to complete */ | |
265 | napi_disable(&channel->napi_str); | |
266 | ||
267 | /* Poll the channel */ | |
91ad757c | 268 | efx_process_channel(channel, efx->type->evq_size); |
8ceee660 BH |
269 | |
270 | /* Ack the eventq. This may cause an interrupt to be generated | |
271 | * when they are reenabled */ | |
272 | efx_channel_processed(channel); | |
273 | ||
274 | napi_enable(&channel->napi_str); | |
275 | falcon_enable_interrupts(efx); | |
276 | } | |
277 | ||
278 | /* Create event queue | |
279 | * Event queue memory allocations are done only once. If the channel | |
280 | * is reset, the memory buffer will be reused; this guards against | |
281 | * errors during channel reset and also simplifies interrupt handling. | |
282 | */ | |
283 | static int efx_probe_eventq(struct efx_channel *channel) | |
284 | { | |
285 | EFX_LOG(channel->efx, "chan %d create event queue\n", channel->channel); | |
286 | ||
287 | return falcon_probe_eventq(channel); | |
288 | } | |
289 | ||
290 | /* Prepare channel's event queue */ | |
291 | static int efx_init_eventq(struct efx_channel *channel) | |
292 | { | |
293 | EFX_LOG(channel->efx, "chan %d init event queue\n", channel->channel); | |
294 | ||
295 | channel->eventq_read_ptr = 0; | |
296 | ||
297 | return falcon_init_eventq(channel); | |
298 | } | |
299 | ||
300 | static void efx_fini_eventq(struct efx_channel *channel) | |
301 | { | |
302 | EFX_LOG(channel->efx, "chan %d fini event queue\n", channel->channel); | |
303 | ||
304 | falcon_fini_eventq(channel); | |
305 | } | |
306 | ||
307 | static void efx_remove_eventq(struct efx_channel *channel) | |
308 | { | |
309 | EFX_LOG(channel->efx, "chan %d remove event queue\n", channel->channel); | |
310 | ||
311 | falcon_remove_eventq(channel); | |
312 | } | |
313 | ||
314 | /************************************************************************** | |
315 | * | |
316 | * Channel handling | |
317 | * | |
318 | *************************************************************************/ | |
319 | ||
8ceee660 BH |
320 | static int efx_probe_channel(struct efx_channel *channel) |
321 | { | |
322 | struct efx_tx_queue *tx_queue; | |
323 | struct efx_rx_queue *rx_queue; | |
324 | int rc; | |
325 | ||
326 | EFX_LOG(channel->efx, "creating channel %d\n", channel->channel); | |
327 | ||
328 | rc = efx_probe_eventq(channel); | |
329 | if (rc) | |
330 | goto fail1; | |
331 | ||
332 | efx_for_each_channel_tx_queue(tx_queue, channel) { | |
333 | rc = efx_probe_tx_queue(tx_queue); | |
334 | if (rc) | |
335 | goto fail2; | |
336 | } | |
337 | ||
338 | efx_for_each_channel_rx_queue(rx_queue, channel) { | |
339 | rc = efx_probe_rx_queue(rx_queue); | |
340 | if (rc) | |
341 | goto fail3; | |
342 | } | |
343 | ||
344 | channel->n_rx_frm_trunc = 0; | |
345 | ||
346 | return 0; | |
347 | ||
348 | fail3: | |
349 | efx_for_each_channel_rx_queue(rx_queue, channel) | |
350 | efx_remove_rx_queue(rx_queue); | |
351 | fail2: | |
352 | efx_for_each_channel_tx_queue(tx_queue, channel) | |
353 | efx_remove_tx_queue(tx_queue); | |
354 | fail1: | |
355 | return rc; | |
356 | } | |
357 | ||
358 | ||
359 | /* Channels are shutdown and reinitialised whilst the NIC is running | |
360 | * to propagate configuration changes (mtu, checksum offload), or | |
361 | * to clear hardware error conditions | |
362 | */ | |
363 | static int efx_init_channels(struct efx_nic *efx) | |
364 | { | |
365 | struct efx_tx_queue *tx_queue; | |
366 | struct efx_rx_queue *rx_queue; | |
367 | struct efx_channel *channel; | |
368 | int rc = 0; | |
369 | ||
f7f13b0b BH |
370 | /* Calculate the rx buffer allocation parameters required to |
371 | * support the current MTU, including padding for header | |
372 | * alignment and overruns. | |
373 | */ | |
374 | efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) + | |
375 | EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + | |
376 | efx->type->rx_buffer_padding); | |
377 | efx->rx_buffer_order = get_order(efx->rx_buffer_len); | |
8ceee660 BH |
378 | |
379 | /* Initialise the channels */ | |
380 | efx_for_each_channel(channel, efx) { | |
381 | EFX_LOG(channel->efx, "init chan %d\n", channel->channel); | |
382 | ||
383 | rc = efx_init_eventq(channel); | |
384 | if (rc) | |
385 | goto err; | |
386 | ||
387 | efx_for_each_channel_tx_queue(tx_queue, channel) { | |
388 | rc = efx_init_tx_queue(tx_queue); | |
389 | if (rc) | |
390 | goto err; | |
391 | } | |
392 | ||
393 | /* The rx buffer allocation strategy is MTU dependent */ | |
394 | efx_rx_strategy(channel); | |
395 | ||
396 | efx_for_each_channel_rx_queue(rx_queue, channel) { | |
397 | rc = efx_init_rx_queue(rx_queue); | |
398 | if (rc) | |
399 | goto err; | |
400 | } | |
401 | ||
402 | WARN_ON(channel->rx_pkt != NULL); | |
403 | efx_rx_strategy(channel); | |
404 | } | |
405 | ||
406 | return 0; | |
407 | ||
408 | err: | |
409 | EFX_ERR(efx, "failed to initialise channel %d\n", | |
410 | channel ? channel->channel : -1); | |
411 | efx_fini_channels(efx); | |
412 | return rc; | |
413 | } | |
414 | ||
415 | /* This enables event queue processing and packet transmission. | |
416 | * | |
417 | * Note that this function is not allowed to fail, since that would | |
418 | * introduce too much complexity into the suspend/resume path. | |
419 | */ | |
420 | static void efx_start_channel(struct efx_channel *channel) | |
421 | { | |
422 | struct efx_rx_queue *rx_queue; | |
423 | ||
424 | EFX_LOG(channel->efx, "starting chan %d\n", channel->channel); | |
425 | ||
426 | if (!(channel->efx->net_dev->flags & IFF_UP)) | |
427 | netif_napi_add(channel->napi_dev, &channel->napi_str, | |
428 | efx_poll, napi_weight); | |
429 | ||
430 | channel->work_pending = 0; | |
431 | channel->enabled = 1; | |
432 | smp_wmb(); /* ensure channel updated before first interrupt */ | |
433 | ||
434 | napi_enable(&channel->napi_str); | |
435 | ||
436 | /* Load up RX descriptors */ | |
437 | efx_for_each_channel_rx_queue(rx_queue, channel) | |
438 | efx_fast_push_rx_descriptors(rx_queue); | |
439 | } | |
440 | ||
441 | /* This disables event queue processing and packet transmission. | |
442 | * This function does not guarantee that all queue processing | |
443 | * (e.g. RX refill) is complete. | |
444 | */ | |
445 | static void efx_stop_channel(struct efx_channel *channel) | |
446 | { | |
447 | struct efx_rx_queue *rx_queue; | |
448 | ||
449 | if (!channel->enabled) | |
450 | return; | |
451 | ||
452 | EFX_LOG(channel->efx, "stop chan %d\n", channel->channel); | |
453 | ||
454 | channel->enabled = 0; | |
455 | napi_disable(&channel->napi_str); | |
456 | ||
457 | /* Ensure that any worker threads have exited or will be no-ops */ | |
458 | efx_for_each_channel_rx_queue(rx_queue, channel) { | |
459 | spin_lock_bh(&rx_queue->add_lock); | |
460 | spin_unlock_bh(&rx_queue->add_lock); | |
461 | } | |
462 | } | |
463 | ||
464 | static void efx_fini_channels(struct efx_nic *efx) | |
465 | { | |
466 | struct efx_channel *channel; | |
467 | struct efx_tx_queue *tx_queue; | |
468 | struct efx_rx_queue *rx_queue; | |
469 | ||
470 | EFX_ASSERT_RESET_SERIALISED(efx); | |
471 | BUG_ON(efx->port_enabled); | |
472 | ||
473 | efx_for_each_channel(channel, efx) { | |
474 | EFX_LOG(channel->efx, "shut down chan %d\n", channel->channel); | |
475 | ||
476 | efx_for_each_channel_rx_queue(rx_queue, channel) | |
477 | efx_fini_rx_queue(rx_queue); | |
478 | efx_for_each_channel_tx_queue(tx_queue, channel) | |
479 | efx_fini_tx_queue(tx_queue); | |
480 | } | |
481 | ||
482 | /* Do the event queues last so that we can handle flush events | |
483 | * for all DMA queues. */ | |
484 | efx_for_each_channel(channel, efx) { | |
485 | EFX_LOG(channel->efx, "shut down evq %d\n", channel->channel); | |
486 | ||
487 | efx_fini_eventq(channel); | |
488 | } | |
489 | } | |
490 | ||
491 | static void efx_remove_channel(struct efx_channel *channel) | |
492 | { | |
493 | struct efx_tx_queue *tx_queue; | |
494 | struct efx_rx_queue *rx_queue; | |
495 | ||
496 | EFX_LOG(channel->efx, "destroy chan %d\n", channel->channel); | |
497 | ||
498 | efx_for_each_channel_rx_queue(rx_queue, channel) | |
499 | efx_remove_rx_queue(rx_queue); | |
500 | efx_for_each_channel_tx_queue(tx_queue, channel) | |
501 | efx_remove_tx_queue(tx_queue); | |
502 | efx_remove_eventq(channel); | |
503 | ||
504 | channel->used_flags = 0; | |
505 | } | |
506 | ||
507 | void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay) | |
508 | { | |
509 | queue_delayed_work(refill_workqueue, &rx_queue->work, delay); | |
510 | } | |
511 | ||
512 | /************************************************************************** | |
513 | * | |
514 | * Port handling | |
515 | * | |
516 | **************************************************************************/ | |
517 | ||
518 | /* This ensures that the kernel is kept informed (via | |
519 | * netif_carrier_on/off) of the link status, and also maintains the | |
520 | * link status's stop on the port's TX queue. | |
521 | */ | |
522 | static void efx_link_status_changed(struct efx_nic *efx) | |
523 | { | |
524 | int carrier_ok; | |
525 | ||
526 | /* SFC Bug 5356: A net_dev notifier is registered, so we must ensure | |
527 | * that no events are triggered between unregister_netdev() and the | |
528 | * driver unloading. A more general condition is that NETDEV_CHANGE | |
529 | * can only be generated between NETDEV_UP and NETDEV_DOWN */ | |
530 | if (!netif_running(efx->net_dev)) | |
531 | return; | |
532 | ||
533 | carrier_ok = netif_carrier_ok(efx->net_dev) ? 1 : 0; | |
534 | if (efx->link_up != carrier_ok) { | |
535 | efx->n_link_state_changes++; | |
536 | ||
537 | if (efx->link_up) | |
538 | netif_carrier_on(efx->net_dev); | |
539 | else | |
540 | netif_carrier_off(efx->net_dev); | |
541 | } | |
542 | ||
543 | /* Status message for kernel log */ | |
544 | if (efx->link_up) { | |
545 | struct mii_if_info *gmii = &efx->mii; | |
546 | unsigned adv, lpa; | |
547 | /* NONE here means direct XAUI from the controller, with no | |
548 | * MDIO-attached device we can query. */ | |
549 | if (efx->phy_type != PHY_TYPE_NONE) { | |
550 | adv = gmii_advertised(gmii); | |
551 | lpa = gmii_lpa(gmii); | |
552 | } else { | |
553 | lpa = GM_LPA_10000 | LPA_DUPLEX; | |
554 | adv = lpa; | |
555 | } | |
556 | EFX_INFO(efx, "link up at %dMbps %s-duplex " | |
557 | "(adv %04x lpa %04x) (MTU %d)%s\n", | |
558 | (efx->link_options & GM_LPA_10000 ? 10000 : | |
559 | (efx->link_options & GM_LPA_1000 ? 1000 : | |
560 | (efx->link_options & GM_LPA_100 ? 100 : | |
561 | 10))), | |
562 | (efx->link_options & GM_LPA_DUPLEX ? | |
563 | "full" : "half"), | |
564 | adv, lpa, | |
565 | efx->net_dev->mtu, | |
566 | (efx->promiscuous ? " [PROMISC]" : "")); | |
567 | } else { | |
568 | EFX_INFO(efx, "link down\n"); | |
569 | } | |
570 | ||
571 | } | |
572 | ||
573 | /* This call reinitialises the MAC to pick up new PHY settings. The | |
574 | * caller must hold the mac_lock */ | |
575 | static void __efx_reconfigure_port(struct efx_nic *efx) | |
576 | { | |
577 | WARN_ON(!mutex_is_locked(&efx->mac_lock)); | |
578 | ||
579 | EFX_LOG(efx, "reconfiguring MAC from PHY settings on CPU %d\n", | |
580 | raw_smp_processor_id()); | |
581 | ||
582 | falcon_reconfigure_xmac(efx); | |
583 | ||
584 | /* Inform kernel of loss/gain of carrier */ | |
585 | efx_link_status_changed(efx); | |
586 | } | |
587 | ||
588 | /* Reinitialise the MAC to pick up new PHY settings, even if the port is | |
589 | * disabled. */ | |
590 | void efx_reconfigure_port(struct efx_nic *efx) | |
591 | { | |
592 | EFX_ASSERT_RESET_SERIALISED(efx); | |
593 | ||
594 | mutex_lock(&efx->mac_lock); | |
595 | __efx_reconfigure_port(efx); | |
596 | mutex_unlock(&efx->mac_lock); | |
597 | } | |
598 | ||
599 | /* Asynchronous efx_reconfigure_port work item. To speed up efx_flush_all() | |
600 | * we don't efx_reconfigure_port() if the port is disabled. Care is taken | |
601 | * in efx_stop_all() and efx_start_port() to prevent PHY events being lost */ | |
602 | static void efx_reconfigure_work(struct work_struct *data) | |
603 | { | |
604 | struct efx_nic *efx = container_of(data, struct efx_nic, | |
605 | reconfigure_work); | |
606 | ||
607 | mutex_lock(&efx->mac_lock); | |
608 | if (efx->port_enabled) | |
609 | __efx_reconfigure_port(efx); | |
610 | mutex_unlock(&efx->mac_lock); | |
611 | } | |
612 | ||
613 | static int efx_probe_port(struct efx_nic *efx) | |
614 | { | |
615 | int rc; | |
616 | ||
617 | EFX_LOG(efx, "create port\n"); | |
618 | ||
619 | /* Connect up MAC/PHY operations table and read MAC address */ | |
620 | rc = falcon_probe_port(efx); | |
621 | if (rc) | |
622 | goto err; | |
623 | ||
624 | /* Sanity check MAC address */ | |
625 | if (is_valid_ether_addr(efx->mac_address)) { | |
626 | memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN); | |
627 | } else { | |
628 | DECLARE_MAC_BUF(mac); | |
629 | ||
630 | EFX_ERR(efx, "invalid MAC address %s\n", | |
631 | print_mac(mac, efx->mac_address)); | |
632 | if (!allow_bad_hwaddr) { | |
633 | rc = -EINVAL; | |
634 | goto err; | |
635 | } | |
636 | random_ether_addr(efx->net_dev->dev_addr); | |
637 | EFX_INFO(efx, "using locally-generated MAC %s\n", | |
638 | print_mac(mac, efx->net_dev->dev_addr)); | |
639 | } | |
640 | ||
641 | return 0; | |
642 | ||
643 | err: | |
644 | efx_remove_port(efx); | |
645 | return rc; | |
646 | } | |
647 | ||
648 | static int efx_init_port(struct efx_nic *efx) | |
649 | { | |
650 | int rc; | |
651 | ||
652 | EFX_LOG(efx, "init port\n"); | |
653 | ||
654 | /* Initialise the MAC and PHY */ | |
655 | rc = falcon_init_xmac(efx); | |
656 | if (rc) | |
657 | return rc; | |
658 | ||
659 | efx->port_initialized = 1; | |
660 | ||
661 | /* Reconfigure port to program MAC registers */ | |
662 | falcon_reconfigure_xmac(efx); | |
663 | ||
664 | return 0; | |
665 | } | |
666 | ||
667 | /* Allow efx_reconfigure_port() to be scheduled, and close the window | |
668 | * between efx_stop_port and efx_flush_all whereby a previously scheduled | |
669 | * efx_reconfigure_port() may have been cancelled */ | |
670 | static void efx_start_port(struct efx_nic *efx) | |
671 | { | |
672 | EFX_LOG(efx, "start port\n"); | |
673 | BUG_ON(efx->port_enabled); | |
674 | ||
675 | mutex_lock(&efx->mac_lock); | |
676 | efx->port_enabled = 1; | |
677 | __efx_reconfigure_port(efx); | |
678 | mutex_unlock(&efx->mac_lock); | |
679 | } | |
680 | ||
681 | /* Prevent efx_reconfigure_work and efx_monitor() from executing, and | |
682 | * efx_set_multicast_list() from scheduling efx_reconfigure_work. | |
683 | * efx_reconfigure_work can still be scheduled via NAPI processing | |
684 | * until efx_flush_all() is called */ | |
685 | static void efx_stop_port(struct efx_nic *efx) | |
686 | { | |
687 | EFX_LOG(efx, "stop port\n"); | |
688 | ||
689 | mutex_lock(&efx->mac_lock); | |
690 | efx->port_enabled = 0; | |
691 | mutex_unlock(&efx->mac_lock); | |
692 | ||
693 | /* Serialise against efx_set_multicast_list() */ | |
55668611 | 694 | if (efx_dev_registered(efx)) { |
8ceee660 BH |
695 | netif_tx_lock_bh(efx->net_dev); |
696 | netif_tx_unlock_bh(efx->net_dev); | |
697 | } | |
698 | } | |
699 | ||
700 | static void efx_fini_port(struct efx_nic *efx) | |
701 | { | |
702 | EFX_LOG(efx, "shut down port\n"); | |
703 | ||
704 | if (!efx->port_initialized) | |
705 | return; | |
706 | ||
707 | falcon_fini_xmac(efx); | |
708 | efx->port_initialized = 0; | |
709 | ||
710 | efx->link_up = 0; | |
711 | efx_link_status_changed(efx); | |
712 | } | |
713 | ||
714 | static void efx_remove_port(struct efx_nic *efx) | |
715 | { | |
716 | EFX_LOG(efx, "destroying port\n"); | |
717 | ||
718 | falcon_remove_port(efx); | |
719 | } | |
720 | ||
721 | /************************************************************************** | |
722 | * | |
723 | * NIC handling | |
724 | * | |
725 | **************************************************************************/ | |
726 | ||
727 | /* This configures the PCI device to enable I/O and DMA. */ | |
728 | static int efx_init_io(struct efx_nic *efx) | |
729 | { | |
730 | struct pci_dev *pci_dev = efx->pci_dev; | |
731 | dma_addr_t dma_mask = efx->type->max_dma_mask; | |
732 | int rc; | |
733 | ||
734 | EFX_LOG(efx, "initialising I/O\n"); | |
735 | ||
736 | rc = pci_enable_device(pci_dev); | |
737 | if (rc) { | |
738 | EFX_ERR(efx, "failed to enable PCI device\n"); | |
739 | goto fail1; | |
740 | } | |
741 | ||
742 | pci_set_master(pci_dev); | |
743 | ||
744 | /* Set the PCI DMA mask. Try all possibilities from our | |
745 | * genuine mask down to 32 bits, because some architectures | |
746 | * (e.g. x86_64 with iommu_sac_force set) will allow 40 bit | |
747 | * masks event though they reject 46 bit masks. | |
748 | */ | |
749 | while (dma_mask > 0x7fffffffUL) { | |
750 | if (pci_dma_supported(pci_dev, dma_mask) && | |
751 | ((rc = pci_set_dma_mask(pci_dev, dma_mask)) == 0)) | |
752 | break; | |
753 | dma_mask >>= 1; | |
754 | } | |
755 | if (rc) { | |
756 | EFX_ERR(efx, "could not find a suitable DMA mask\n"); | |
757 | goto fail2; | |
758 | } | |
759 | EFX_LOG(efx, "using DMA mask %llx\n", (unsigned long long) dma_mask); | |
760 | rc = pci_set_consistent_dma_mask(pci_dev, dma_mask); | |
761 | if (rc) { | |
762 | /* pci_set_consistent_dma_mask() is not *allowed* to | |
763 | * fail with a mask that pci_set_dma_mask() accepted, | |
764 | * but just in case... | |
765 | */ | |
766 | EFX_ERR(efx, "failed to set consistent DMA mask\n"); | |
767 | goto fail2; | |
768 | } | |
769 | ||
770 | efx->membase_phys = pci_resource_start(efx->pci_dev, | |
771 | efx->type->mem_bar); | |
772 | rc = pci_request_region(pci_dev, efx->type->mem_bar, "sfc"); | |
773 | if (rc) { | |
774 | EFX_ERR(efx, "request for memory BAR failed\n"); | |
775 | rc = -EIO; | |
776 | goto fail3; | |
777 | } | |
778 | efx->membase = ioremap_nocache(efx->membase_phys, | |
779 | efx->type->mem_map_size); | |
780 | if (!efx->membase) { | |
781 | EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n", | |
782 | efx->type->mem_bar, efx->membase_phys, | |
783 | efx->type->mem_map_size); | |
784 | rc = -ENOMEM; | |
785 | goto fail4; | |
786 | } | |
787 | EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n", | |
788 | efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size, | |
789 | efx->membase); | |
790 | ||
791 | return 0; | |
792 | ||
793 | fail4: | |
794 | release_mem_region(efx->membase_phys, efx->type->mem_map_size); | |
795 | fail3: | |
2c118e0f | 796 | efx->membase_phys = 0; |
8ceee660 BH |
797 | fail2: |
798 | pci_disable_device(efx->pci_dev); | |
799 | fail1: | |
800 | return rc; | |
801 | } | |
802 | ||
803 | static void efx_fini_io(struct efx_nic *efx) | |
804 | { | |
805 | EFX_LOG(efx, "shutting down I/O\n"); | |
806 | ||
807 | if (efx->membase) { | |
808 | iounmap(efx->membase); | |
809 | efx->membase = NULL; | |
810 | } | |
811 | ||
812 | if (efx->membase_phys) { | |
813 | pci_release_region(efx->pci_dev, efx->type->mem_bar); | |
2c118e0f | 814 | efx->membase_phys = 0; |
8ceee660 BH |
815 | } |
816 | ||
817 | pci_disable_device(efx->pci_dev); | |
818 | } | |
819 | ||
820 | /* Probe the number and type of interrupts we are able to obtain. */ | |
821 | static void efx_probe_interrupts(struct efx_nic *efx) | |
822 | { | |
823 | int max_channel = efx->type->phys_addr_channels - 1; | |
824 | struct msix_entry xentries[EFX_MAX_CHANNELS]; | |
825 | int rc, i; | |
826 | ||
827 | if (efx->interrupt_mode == EFX_INT_MODE_MSIX) { | |
828 | BUG_ON(!pci_find_capability(efx->pci_dev, PCI_CAP_ID_MSIX)); | |
829 | ||
830 | efx->rss_queues = rss_cpus ? rss_cpus : num_online_cpus(); | |
831 | efx->rss_queues = min(efx->rss_queues, max_channel + 1); | |
832 | efx->rss_queues = min(efx->rss_queues, EFX_MAX_CHANNELS); | |
833 | ||
834 | /* Request maximum number of MSI interrupts, and fill out | |
835 | * the channel interrupt information the allowed allocation */ | |
836 | for (i = 0; i < efx->rss_queues; i++) | |
837 | xentries[i].entry = i; | |
838 | rc = pci_enable_msix(efx->pci_dev, xentries, efx->rss_queues); | |
839 | if (rc > 0) { | |
840 | EFX_BUG_ON_PARANOID(rc >= efx->rss_queues); | |
841 | efx->rss_queues = rc; | |
842 | rc = pci_enable_msix(efx->pci_dev, xentries, | |
843 | efx->rss_queues); | |
844 | } | |
845 | ||
846 | if (rc == 0) { | |
847 | for (i = 0; i < efx->rss_queues; i++) { | |
848 | efx->channel[i].has_interrupt = 1; | |
849 | efx->channel[i].irq = xentries[i].vector; | |
850 | } | |
851 | } else { | |
852 | /* Fall back to single channel MSI */ | |
853 | efx->interrupt_mode = EFX_INT_MODE_MSI; | |
854 | EFX_ERR(efx, "could not enable MSI-X\n"); | |
855 | } | |
856 | } | |
857 | ||
858 | /* Try single interrupt MSI */ | |
859 | if (efx->interrupt_mode == EFX_INT_MODE_MSI) { | |
860 | efx->rss_queues = 1; | |
861 | rc = pci_enable_msi(efx->pci_dev); | |
862 | if (rc == 0) { | |
863 | efx->channel[0].irq = efx->pci_dev->irq; | |
864 | efx->channel[0].has_interrupt = 1; | |
865 | } else { | |
866 | EFX_ERR(efx, "could not enable MSI\n"); | |
867 | efx->interrupt_mode = EFX_INT_MODE_LEGACY; | |
868 | } | |
869 | } | |
870 | ||
871 | /* Assume legacy interrupts */ | |
872 | if (efx->interrupt_mode == EFX_INT_MODE_LEGACY) { | |
873 | efx->rss_queues = 1; | |
874 | /* Every channel is interruptible */ | |
875 | for (i = 0; i < EFX_MAX_CHANNELS; i++) | |
876 | efx->channel[i].has_interrupt = 1; | |
877 | efx->legacy_irq = efx->pci_dev->irq; | |
878 | } | |
879 | } | |
880 | ||
881 | static void efx_remove_interrupts(struct efx_nic *efx) | |
882 | { | |
883 | struct efx_channel *channel; | |
884 | ||
885 | /* Remove MSI/MSI-X interrupts */ | |
886 | efx_for_each_channel_with_interrupt(channel, efx) | |
887 | channel->irq = 0; | |
888 | pci_disable_msi(efx->pci_dev); | |
889 | pci_disable_msix(efx->pci_dev); | |
890 | ||
891 | /* Remove legacy interrupt */ | |
892 | efx->legacy_irq = 0; | |
893 | } | |
894 | ||
895 | /* Select number of used resources | |
896 | * Should be called after probe_interrupts() | |
897 | */ | |
898 | static void efx_select_used(struct efx_nic *efx) | |
899 | { | |
900 | struct efx_tx_queue *tx_queue; | |
901 | struct efx_rx_queue *rx_queue; | |
902 | int i; | |
903 | ||
904 | /* TX queues. One per port per channel with TX capability | |
905 | * (more than one per port won't work on Linux, due to out | |
906 | * of order issues... but will be fine on Solaris) | |
907 | */ | |
908 | tx_queue = &efx->tx_queue[0]; | |
909 | ||
910 | /* Perform this for each channel with TX capabilities. | |
911 | * At the moment, we only support a single TX queue | |
912 | */ | |
913 | tx_queue->used = 1; | |
914 | if ((!EFX_INT_MODE_USE_MSI(efx)) && separate_tx_and_rx_channels) | |
915 | tx_queue->channel = &efx->channel[1]; | |
916 | else | |
917 | tx_queue->channel = &efx->channel[0]; | |
918 | tx_queue->channel->used_flags |= EFX_USED_BY_TX; | |
919 | tx_queue++; | |
920 | ||
921 | /* RX queues. Each has a dedicated channel. */ | |
922 | for (i = 0; i < EFX_MAX_RX_QUEUES; i++) { | |
923 | rx_queue = &efx->rx_queue[i]; | |
924 | ||
925 | if (i < efx->rss_queues) { | |
926 | rx_queue->used = 1; | |
927 | /* If we allow multiple RX queues per channel | |
928 | * we need to decide that here | |
929 | */ | |
930 | rx_queue->channel = &efx->channel[rx_queue->queue]; | |
931 | rx_queue->channel->used_flags |= EFX_USED_BY_RX; | |
932 | rx_queue++; | |
933 | } | |
934 | } | |
935 | } | |
936 | ||
937 | static int efx_probe_nic(struct efx_nic *efx) | |
938 | { | |
939 | int rc; | |
940 | ||
941 | EFX_LOG(efx, "creating NIC\n"); | |
942 | ||
943 | /* Carry out hardware-type specific initialisation */ | |
944 | rc = falcon_probe_nic(efx); | |
945 | if (rc) | |
946 | return rc; | |
947 | ||
948 | /* Determine the number of channels and RX queues by trying to hook | |
949 | * in MSI-X interrupts. */ | |
950 | efx_probe_interrupts(efx); | |
951 | ||
952 | /* Determine number of RX queues and TX queues */ | |
953 | efx_select_used(efx); | |
954 | ||
955 | /* Initialise the interrupt moderation settings */ | |
956 | efx_init_irq_moderation(efx, tx_irq_mod_usec, rx_irq_mod_usec); | |
957 | ||
958 | return 0; | |
959 | } | |
960 | ||
961 | static void efx_remove_nic(struct efx_nic *efx) | |
962 | { | |
963 | EFX_LOG(efx, "destroying NIC\n"); | |
964 | ||
965 | efx_remove_interrupts(efx); | |
966 | falcon_remove_nic(efx); | |
967 | } | |
968 | ||
969 | /************************************************************************** | |
970 | * | |
971 | * NIC startup/shutdown | |
972 | * | |
973 | *************************************************************************/ | |
974 | ||
975 | static int efx_probe_all(struct efx_nic *efx) | |
976 | { | |
977 | struct efx_channel *channel; | |
978 | int rc; | |
979 | ||
980 | /* Create NIC */ | |
981 | rc = efx_probe_nic(efx); | |
982 | if (rc) { | |
983 | EFX_ERR(efx, "failed to create NIC\n"); | |
984 | goto fail1; | |
985 | } | |
986 | ||
987 | /* Create port */ | |
988 | rc = efx_probe_port(efx); | |
989 | if (rc) { | |
990 | EFX_ERR(efx, "failed to create port\n"); | |
991 | goto fail2; | |
992 | } | |
993 | ||
994 | /* Create channels */ | |
995 | efx_for_each_channel(channel, efx) { | |
996 | rc = efx_probe_channel(channel); | |
997 | if (rc) { | |
998 | EFX_ERR(efx, "failed to create channel %d\n", | |
999 | channel->channel); | |
1000 | goto fail3; | |
1001 | } | |
1002 | } | |
1003 | ||
1004 | return 0; | |
1005 | ||
1006 | fail3: | |
1007 | efx_for_each_channel(channel, efx) | |
1008 | efx_remove_channel(channel); | |
1009 | efx_remove_port(efx); | |
1010 | fail2: | |
1011 | efx_remove_nic(efx); | |
1012 | fail1: | |
1013 | return rc; | |
1014 | } | |
1015 | ||
1016 | /* Called after previous invocation(s) of efx_stop_all, restarts the | |
1017 | * port, kernel transmit queue, NAPI processing and hardware interrupts, | |
1018 | * and ensures that the port is scheduled to be reconfigured. | |
1019 | * This function is safe to call multiple times when the NIC is in any | |
1020 | * state. */ | |
1021 | static void efx_start_all(struct efx_nic *efx) | |
1022 | { | |
1023 | struct efx_channel *channel; | |
1024 | ||
1025 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1026 | ||
1027 | /* Check that it is appropriate to restart the interface. All | |
1028 | * of these flags are safe to read under just the rtnl lock */ | |
1029 | if (efx->port_enabled) | |
1030 | return; | |
1031 | if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT)) | |
1032 | return; | |
55668611 | 1033 | if (efx_dev_registered(efx) && !netif_running(efx->net_dev)) |
8ceee660 BH |
1034 | return; |
1035 | ||
1036 | /* Mark the port as enabled so port reconfigurations can start, then | |
1037 | * restart the transmit interface early so the watchdog timer stops */ | |
1038 | efx_start_port(efx); | |
1039 | efx_wake_queue(efx); | |
1040 | ||
1041 | efx_for_each_channel(channel, efx) | |
1042 | efx_start_channel(channel); | |
1043 | ||
1044 | falcon_enable_interrupts(efx); | |
1045 | ||
1046 | /* Start hardware monitor if we're in RUNNING */ | |
1047 | if (efx->state == STATE_RUNNING) | |
1048 | queue_delayed_work(efx->workqueue, &efx->monitor_work, | |
1049 | efx_monitor_interval); | |
1050 | } | |
1051 | ||
1052 | /* Flush all delayed work. Should only be called when no more delayed work | |
1053 | * will be scheduled. This doesn't flush pending online resets (efx_reset), | |
1054 | * since we're holding the rtnl_lock at this point. */ | |
1055 | static void efx_flush_all(struct efx_nic *efx) | |
1056 | { | |
1057 | struct efx_rx_queue *rx_queue; | |
1058 | ||
1059 | /* Make sure the hardware monitor is stopped */ | |
1060 | cancel_delayed_work_sync(&efx->monitor_work); | |
1061 | ||
1062 | /* Ensure that all RX slow refills are complete. */ | |
b3475645 | 1063 | efx_for_each_rx_queue(rx_queue, efx) |
8ceee660 | 1064 | cancel_delayed_work_sync(&rx_queue->work); |
8ceee660 BH |
1065 | |
1066 | /* Stop scheduled port reconfigurations */ | |
1067 | cancel_work_sync(&efx->reconfigure_work); | |
1068 | ||
1069 | } | |
1070 | ||
1071 | /* Quiesce hardware and software without bringing the link down. | |
1072 | * Safe to call multiple times, when the nic and interface is in any | |
1073 | * state. The caller is guaranteed to subsequently be in a position | |
1074 | * to modify any hardware and software state they see fit without | |
1075 | * taking locks. */ | |
1076 | static void efx_stop_all(struct efx_nic *efx) | |
1077 | { | |
1078 | struct efx_channel *channel; | |
1079 | ||
1080 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1081 | ||
1082 | /* port_enabled can be read safely under the rtnl lock */ | |
1083 | if (!efx->port_enabled) | |
1084 | return; | |
1085 | ||
1086 | /* Disable interrupts and wait for ISR to complete */ | |
1087 | falcon_disable_interrupts(efx); | |
1088 | if (efx->legacy_irq) | |
1089 | synchronize_irq(efx->legacy_irq); | |
b3475645 | 1090 | efx_for_each_channel_with_interrupt(channel, efx) { |
8ceee660 BH |
1091 | if (channel->irq) |
1092 | synchronize_irq(channel->irq); | |
b3475645 | 1093 | } |
8ceee660 BH |
1094 | |
1095 | /* Stop all NAPI processing and synchronous rx refills */ | |
1096 | efx_for_each_channel(channel, efx) | |
1097 | efx_stop_channel(channel); | |
1098 | ||
1099 | /* Stop all asynchronous port reconfigurations. Since all | |
1100 | * event processing has already been stopped, there is no | |
1101 | * window to loose phy events */ | |
1102 | efx_stop_port(efx); | |
1103 | ||
1104 | /* Flush reconfigure_work, refill_workqueue, monitor_work */ | |
1105 | efx_flush_all(efx); | |
1106 | ||
1107 | /* Isolate the MAC from the TX and RX engines, so that queue | |
1108 | * flushes will complete in a timely fashion. */ | |
1109 | falcon_deconfigure_mac_wrapper(efx); | |
1110 | falcon_drain_tx_fifo(efx); | |
1111 | ||
1112 | /* Stop the kernel transmit interface late, so the watchdog | |
1113 | * timer isn't ticking over the flush */ | |
1114 | efx_stop_queue(efx); | |
55668611 | 1115 | if (efx_dev_registered(efx)) { |
8ceee660 BH |
1116 | netif_tx_lock_bh(efx->net_dev); |
1117 | netif_tx_unlock_bh(efx->net_dev); | |
1118 | } | |
1119 | } | |
1120 | ||
1121 | static void efx_remove_all(struct efx_nic *efx) | |
1122 | { | |
1123 | struct efx_channel *channel; | |
1124 | ||
1125 | efx_for_each_channel(channel, efx) | |
1126 | efx_remove_channel(channel); | |
1127 | efx_remove_port(efx); | |
1128 | efx_remove_nic(efx); | |
1129 | } | |
1130 | ||
1131 | /* A convinience function to safely flush all the queues */ | |
1132 | int efx_flush_queues(struct efx_nic *efx) | |
1133 | { | |
1134 | int rc; | |
1135 | ||
1136 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1137 | ||
1138 | efx_stop_all(efx); | |
1139 | ||
1140 | efx_fini_channels(efx); | |
1141 | rc = efx_init_channels(efx); | |
1142 | if (rc) { | |
1143 | efx_schedule_reset(efx, RESET_TYPE_DISABLE); | |
1144 | return rc; | |
1145 | } | |
1146 | ||
1147 | efx_start_all(efx); | |
1148 | ||
1149 | return 0; | |
1150 | } | |
1151 | ||
1152 | /************************************************************************** | |
1153 | * | |
1154 | * Interrupt moderation | |
1155 | * | |
1156 | **************************************************************************/ | |
1157 | ||
1158 | /* Set interrupt moderation parameters */ | |
1159 | void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs, int rx_usecs) | |
1160 | { | |
1161 | struct efx_tx_queue *tx_queue; | |
1162 | struct efx_rx_queue *rx_queue; | |
1163 | ||
1164 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1165 | ||
1166 | efx_for_each_tx_queue(tx_queue, efx) | |
1167 | tx_queue->channel->irq_moderation = tx_usecs; | |
1168 | ||
1169 | efx_for_each_rx_queue(rx_queue, efx) | |
1170 | rx_queue->channel->irq_moderation = rx_usecs; | |
1171 | } | |
1172 | ||
1173 | /************************************************************************** | |
1174 | * | |
1175 | * Hardware monitor | |
1176 | * | |
1177 | **************************************************************************/ | |
1178 | ||
1179 | /* Run periodically off the general workqueue. Serialised against | |
1180 | * efx_reconfigure_port via the mac_lock */ | |
1181 | static void efx_monitor(struct work_struct *data) | |
1182 | { | |
1183 | struct efx_nic *efx = container_of(data, struct efx_nic, | |
1184 | monitor_work.work); | |
1185 | int rc = 0; | |
1186 | ||
1187 | EFX_TRACE(efx, "hardware monitor executing on CPU %d\n", | |
1188 | raw_smp_processor_id()); | |
1189 | ||
1190 | ||
1191 | /* If the mac_lock is already held then it is likely a port | |
1192 | * reconfiguration is already in place, which will likely do | |
1193 | * most of the work of check_hw() anyway. */ | |
1194 | if (!mutex_trylock(&efx->mac_lock)) { | |
1195 | queue_delayed_work(efx->workqueue, &efx->monitor_work, | |
1196 | efx_monitor_interval); | |
1197 | return; | |
1198 | } | |
1199 | ||
1200 | if (efx->port_enabled) | |
1201 | rc = falcon_check_xmac(efx); | |
1202 | mutex_unlock(&efx->mac_lock); | |
1203 | ||
1204 | if (rc) { | |
1205 | if (monitor_reset) { | |
1206 | EFX_ERR(efx, "hardware monitor detected a fault: " | |
1207 | "triggering reset\n"); | |
1208 | efx_schedule_reset(efx, RESET_TYPE_MONITOR); | |
1209 | } else { | |
1210 | EFX_ERR(efx, "hardware monitor detected a fault, " | |
1211 | "skipping reset\n"); | |
1212 | } | |
1213 | } | |
1214 | ||
1215 | queue_delayed_work(efx->workqueue, &efx->monitor_work, | |
1216 | efx_monitor_interval); | |
1217 | } | |
1218 | ||
1219 | /************************************************************************** | |
1220 | * | |
1221 | * ioctls | |
1222 | * | |
1223 | *************************************************************************/ | |
1224 | ||
1225 | /* Net device ioctl | |
1226 | * Context: process, rtnl_lock() held. | |
1227 | */ | |
1228 | static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) | |
1229 | { | |
1230 | struct efx_nic *efx = net_dev->priv; | |
1231 | ||
1232 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1233 | ||
1234 | return generic_mii_ioctl(&efx->mii, if_mii(ifr), cmd, NULL); | |
1235 | } | |
1236 | ||
1237 | /************************************************************************** | |
1238 | * | |
1239 | * NAPI interface | |
1240 | * | |
1241 | **************************************************************************/ | |
1242 | ||
1243 | static int efx_init_napi(struct efx_nic *efx) | |
1244 | { | |
1245 | struct efx_channel *channel; | |
1246 | int rc; | |
1247 | ||
1248 | efx_for_each_channel(channel, efx) { | |
1249 | channel->napi_dev = efx->net_dev; | |
1250 | rc = efx_lro_init(&channel->lro_mgr, efx); | |
1251 | if (rc) | |
1252 | goto err; | |
1253 | } | |
1254 | return 0; | |
1255 | err: | |
1256 | efx_fini_napi(efx); | |
1257 | return rc; | |
1258 | } | |
1259 | ||
1260 | static void efx_fini_napi(struct efx_nic *efx) | |
1261 | { | |
1262 | struct efx_channel *channel; | |
1263 | ||
1264 | efx_for_each_channel(channel, efx) { | |
1265 | efx_lro_fini(&channel->lro_mgr); | |
1266 | channel->napi_dev = NULL; | |
1267 | } | |
1268 | } | |
1269 | ||
1270 | /************************************************************************** | |
1271 | * | |
1272 | * Kernel netpoll interface | |
1273 | * | |
1274 | *************************************************************************/ | |
1275 | ||
1276 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
1277 | ||
1278 | /* Although in the common case interrupts will be disabled, this is not | |
1279 | * guaranteed. However, all our work happens inside the NAPI callback, | |
1280 | * so no locking is required. | |
1281 | */ | |
1282 | static void efx_netpoll(struct net_device *net_dev) | |
1283 | { | |
1284 | struct efx_nic *efx = net_dev->priv; | |
1285 | struct efx_channel *channel; | |
1286 | ||
1287 | efx_for_each_channel_with_interrupt(channel, efx) | |
1288 | efx_schedule_channel(channel); | |
1289 | } | |
1290 | ||
1291 | #endif | |
1292 | ||
1293 | /************************************************************************** | |
1294 | * | |
1295 | * Kernel net device interface | |
1296 | * | |
1297 | *************************************************************************/ | |
1298 | ||
1299 | /* Context: process, rtnl_lock() held. */ | |
1300 | static int efx_net_open(struct net_device *net_dev) | |
1301 | { | |
1302 | struct efx_nic *efx = net_dev->priv; | |
1303 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1304 | ||
1305 | EFX_LOG(efx, "opening device %s on CPU %d\n", net_dev->name, | |
1306 | raw_smp_processor_id()); | |
1307 | ||
1308 | efx_start_all(efx); | |
1309 | return 0; | |
1310 | } | |
1311 | ||
1312 | /* Context: process, rtnl_lock() held. | |
1313 | * Note that the kernel will ignore our return code; this method | |
1314 | * should really be a void. | |
1315 | */ | |
1316 | static int efx_net_stop(struct net_device *net_dev) | |
1317 | { | |
1318 | struct efx_nic *efx = net_dev->priv; | |
1319 | int rc; | |
1320 | ||
1321 | EFX_LOG(efx, "closing %s on CPU %d\n", net_dev->name, | |
1322 | raw_smp_processor_id()); | |
1323 | ||
1324 | /* Stop the device and flush all the channels */ | |
1325 | efx_stop_all(efx); | |
1326 | efx_fini_channels(efx); | |
1327 | rc = efx_init_channels(efx); | |
1328 | if (rc) | |
1329 | efx_schedule_reset(efx, RESET_TYPE_DISABLE); | |
1330 | ||
1331 | return 0; | |
1332 | } | |
1333 | ||
1334 | /* Context: process, dev_base_lock held, non-blocking. */ | |
1335 | static struct net_device_stats *efx_net_stats(struct net_device *net_dev) | |
1336 | { | |
1337 | struct efx_nic *efx = net_dev->priv; | |
1338 | struct efx_mac_stats *mac_stats = &efx->mac_stats; | |
1339 | struct net_device_stats *stats = &net_dev->stats; | |
1340 | ||
1341 | if (!spin_trylock(&efx->stats_lock)) | |
1342 | return stats; | |
1343 | if (efx->state == STATE_RUNNING) { | |
1344 | falcon_update_stats_xmac(efx); | |
1345 | falcon_update_nic_stats(efx); | |
1346 | } | |
1347 | spin_unlock(&efx->stats_lock); | |
1348 | ||
1349 | stats->rx_packets = mac_stats->rx_packets; | |
1350 | stats->tx_packets = mac_stats->tx_packets; | |
1351 | stats->rx_bytes = mac_stats->rx_bytes; | |
1352 | stats->tx_bytes = mac_stats->tx_bytes; | |
1353 | stats->multicast = mac_stats->rx_multicast; | |
1354 | stats->collisions = mac_stats->tx_collision; | |
1355 | stats->rx_length_errors = (mac_stats->rx_gtjumbo + | |
1356 | mac_stats->rx_length_error); | |
1357 | stats->rx_over_errors = efx->n_rx_nodesc_drop_cnt; | |
1358 | stats->rx_crc_errors = mac_stats->rx_bad; | |
1359 | stats->rx_frame_errors = mac_stats->rx_align_error; | |
1360 | stats->rx_fifo_errors = mac_stats->rx_overflow; | |
1361 | stats->rx_missed_errors = mac_stats->rx_missed; | |
1362 | stats->tx_window_errors = mac_stats->tx_late_collision; | |
1363 | ||
1364 | stats->rx_errors = (stats->rx_length_errors + | |
1365 | stats->rx_over_errors + | |
1366 | stats->rx_crc_errors + | |
1367 | stats->rx_frame_errors + | |
1368 | stats->rx_fifo_errors + | |
1369 | stats->rx_missed_errors + | |
1370 | mac_stats->rx_symbol_error); | |
1371 | stats->tx_errors = (stats->tx_window_errors + | |
1372 | mac_stats->tx_bad); | |
1373 | ||
1374 | return stats; | |
1375 | } | |
1376 | ||
1377 | /* Context: netif_tx_lock held, BHs disabled. */ | |
1378 | static void efx_watchdog(struct net_device *net_dev) | |
1379 | { | |
1380 | struct efx_nic *efx = net_dev->priv; | |
1381 | ||
1382 | EFX_ERR(efx, "TX stuck with stop_count=%d port_enabled=%d: %s\n", | |
1383 | atomic_read(&efx->netif_stop_count), efx->port_enabled, | |
1384 | monitor_reset ? "resetting channels" : "skipping reset"); | |
1385 | ||
1386 | if (monitor_reset) | |
1387 | efx_schedule_reset(efx, RESET_TYPE_MONITOR); | |
1388 | } | |
1389 | ||
1390 | ||
1391 | /* Context: process, rtnl_lock() held. */ | |
1392 | static int efx_change_mtu(struct net_device *net_dev, int new_mtu) | |
1393 | { | |
1394 | struct efx_nic *efx = net_dev->priv; | |
1395 | int rc = 0; | |
1396 | ||
1397 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1398 | ||
1399 | if (new_mtu > EFX_MAX_MTU) | |
1400 | return -EINVAL; | |
1401 | ||
1402 | efx_stop_all(efx); | |
1403 | ||
1404 | EFX_LOG(efx, "changing MTU to %d\n", new_mtu); | |
1405 | ||
1406 | efx_fini_channels(efx); | |
1407 | net_dev->mtu = new_mtu; | |
1408 | rc = efx_init_channels(efx); | |
1409 | if (rc) | |
1410 | goto fail; | |
1411 | ||
1412 | efx_start_all(efx); | |
1413 | return rc; | |
1414 | ||
1415 | fail: | |
1416 | efx_schedule_reset(efx, RESET_TYPE_DISABLE); | |
1417 | return rc; | |
1418 | } | |
1419 | ||
1420 | static int efx_set_mac_address(struct net_device *net_dev, void *data) | |
1421 | { | |
1422 | struct efx_nic *efx = net_dev->priv; | |
1423 | struct sockaddr *addr = data; | |
1424 | char *new_addr = addr->sa_data; | |
1425 | ||
1426 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1427 | ||
1428 | if (!is_valid_ether_addr(new_addr)) { | |
1429 | DECLARE_MAC_BUF(mac); | |
1430 | EFX_ERR(efx, "invalid ethernet MAC address requested: %s\n", | |
1431 | print_mac(mac, new_addr)); | |
1432 | return -EINVAL; | |
1433 | } | |
1434 | ||
1435 | memcpy(net_dev->dev_addr, new_addr, net_dev->addr_len); | |
1436 | ||
1437 | /* Reconfigure the MAC */ | |
1438 | efx_reconfigure_port(efx); | |
1439 | ||
1440 | return 0; | |
1441 | } | |
1442 | ||
1443 | /* Context: netif_tx_lock held, BHs disabled. */ | |
1444 | static void efx_set_multicast_list(struct net_device *net_dev) | |
1445 | { | |
1446 | struct efx_nic *efx = net_dev->priv; | |
1447 | struct dev_mc_list *mc_list = net_dev->mc_list; | |
1448 | union efx_multicast_hash *mc_hash = &efx->multicast_hash; | |
1449 | int promiscuous; | |
1450 | u32 crc; | |
1451 | int bit; | |
1452 | int i; | |
1453 | ||
1454 | /* Set per-MAC promiscuity flag and reconfigure MAC if necessary */ | |
1455 | promiscuous = (net_dev->flags & IFF_PROMISC) ? 1 : 0; | |
1456 | if (efx->promiscuous != promiscuous) { | |
1457 | efx->promiscuous = promiscuous; | |
1458 | /* Close the window between efx_stop_port() and efx_flush_all() | |
1459 | * by only queuing work when the port is enabled. */ | |
1460 | if (efx->port_enabled) | |
1461 | queue_work(efx->workqueue, &efx->reconfigure_work); | |
1462 | } | |
1463 | ||
1464 | /* Build multicast hash table */ | |
1465 | if (promiscuous || (net_dev->flags & IFF_ALLMULTI)) { | |
1466 | memset(mc_hash, 0xff, sizeof(*mc_hash)); | |
1467 | } else { | |
1468 | memset(mc_hash, 0x00, sizeof(*mc_hash)); | |
1469 | for (i = 0; i < net_dev->mc_count; i++) { | |
1470 | crc = ether_crc_le(ETH_ALEN, mc_list->dmi_addr); | |
1471 | bit = crc & (EFX_MCAST_HASH_ENTRIES - 1); | |
1472 | set_bit_le(bit, mc_hash->byte); | |
1473 | mc_list = mc_list->next; | |
1474 | } | |
1475 | } | |
1476 | ||
1477 | /* Create and activate new global multicast hash table */ | |
1478 | falcon_set_multicast_hash(efx); | |
1479 | } | |
1480 | ||
1481 | static int efx_netdev_event(struct notifier_block *this, | |
1482 | unsigned long event, void *ptr) | |
1483 | { | |
1484 | struct net_device *net_dev = (struct net_device *)ptr; | |
1485 | ||
1486 | if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) { | |
1487 | struct efx_nic *efx = net_dev->priv; | |
1488 | ||
1489 | strcpy(efx->name, net_dev->name); | |
1490 | } | |
1491 | ||
1492 | return NOTIFY_DONE; | |
1493 | } | |
1494 | ||
1495 | static struct notifier_block efx_netdev_notifier = { | |
1496 | .notifier_call = efx_netdev_event, | |
1497 | }; | |
1498 | ||
1499 | static int efx_register_netdev(struct efx_nic *efx) | |
1500 | { | |
1501 | struct net_device *net_dev = efx->net_dev; | |
1502 | int rc; | |
1503 | ||
1504 | net_dev->watchdog_timeo = 5 * HZ; | |
1505 | net_dev->irq = efx->pci_dev->irq; | |
1506 | net_dev->open = efx_net_open; | |
1507 | net_dev->stop = efx_net_stop; | |
1508 | net_dev->get_stats = efx_net_stats; | |
1509 | net_dev->tx_timeout = &efx_watchdog; | |
1510 | net_dev->hard_start_xmit = efx_hard_start_xmit; | |
1511 | net_dev->do_ioctl = efx_ioctl; | |
1512 | net_dev->change_mtu = efx_change_mtu; | |
1513 | net_dev->set_mac_address = efx_set_mac_address; | |
1514 | net_dev->set_multicast_list = efx_set_multicast_list; | |
1515 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
1516 | net_dev->poll_controller = efx_netpoll; | |
1517 | #endif | |
1518 | SET_NETDEV_DEV(net_dev, &efx->pci_dev->dev); | |
1519 | SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops); | |
1520 | ||
1521 | /* Always start with carrier off; PHY events will detect the link */ | |
1522 | netif_carrier_off(efx->net_dev); | |
1523 | ||
1524 | /* Clear MAC statistics */ | |
1525 | falcon_update_stats_xmac(efx); | |
1526 | memset(&efx->mac_stats, 0, sizeof(efx->mac_stats)); | |
1527 | ||
1528 | rc = register_netdev(net_dev); | |
1529 | if (rc) { | |
1530 | EFX_ERR(efx, "could not register net dev\n"); | |
1531 | return rc; | |
1532 | } | |
1533 | strcpy(efx->name, net_dev->name); | |
1534 | ||
1535 | return 0; | |
1536 | } | |
1537 | ||
1538 | static void efx_unregister_netdev(struct efx_nic *efx) | |
1539 | { | |
1540 | struct efx_tx_queue *tx_queue; | |
1541 | ||
1542 | if (!efx->net_dev) | |
1543 | return; | |
1544 | ||
1545 | BUG_ON(efx->net_dev->priv != efx); | |
1546 | ||
1547 | /* Free up any skbs still remaining. This has to happen before | |
1548 | * we try to unregister the netdev as running their destructors | |
1549 | * may be needed to get the device ref. count to 0. */ | |
1550 | efx_for_each_tx_queue(tx_queue, efx) | |
1551 | efx_release_tx_buffers(tx_queue); | |
1552 | ||
55668611 | 1553 | if (efx_dev_registered(efx)) { |
8ceee660 BH |
1554 | strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name)); |
1555 | unregister_netdev(efx->net_dev); | |
1556 | } | |
1557 | } | |
1558 | ||
1559 | /************************************************************************** | |
1560 | * | |
1561 | * Device reset and suspend | |
1562 | * | |
1563 | **************************************************************************/ | |
1564 | ||
1565 | /* The final hardware and software finalisation before reset. */ | |
1566 | static int efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) | |
1567 | { | |
1568 | int rc; | |
1569 | ||
1570 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1571 | ||
1572 | rc = falcon_xmac_get_settings(efx, ecmd); | |
1573 | if (rc) { | |
1574 | EFX_ERR(efx, "could not back up PHY settings\n"); | |
1575 | goto fail; | |
1576 | } | |
1577 | ||
1578 | efx_fini_channels(efx); | |
1579 | return 0; | |
1580 | ||
1581 | fail: | |
1582 | return rc; | |
1583 | } | |
1584 | ||
1585 | /* The first part of software initialisation after a hardware reset | |
1586 | * This function does not handle serialisation with the kernel, it | |
1587 | * assumes the caller has done this */ | |
1588 | static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd) | |
1589 | { | |
1590 | int rc; | |
1591 | ||
1592 | rc = efx_init_channels(efx); | |
1593 | if (rc) | |
1594 | goto fail1; | |
1595 | ||
1596 | /* Restore MAC and PHY settings. */ | |
1597 | rc = falcon_xmac_set_settings(efx, ecmd); | |
1598 | if (rc) { | |
1599 | EFX_ERR(efx, "could not restore PHY settings\n"); | |
1600 | goto fail2; | |
1601 | } | |
1602 | ||
1603 | return 0; | |
1604 | ||
1605 | fail2: | |
1606 | efx_fini_channels(efx); | |
1607 | fail1: | |
1608 | return rc; | |
1609 | } | |
1610 | ||
1611 | /* Reset the NIC as transparently as possible. Do not reset the PHY | |
1612 | * Note that the reset may fail, in which case the card will be left | |
1613 | * in a most-probably-unusable state. | |
1614 | * | |
1615 | * This function will sleep. You cannot reset from within an atomic | |
1616 | * state; use efx_schedule_reset() instead. | |
1617 | * | |
1618 | * Grabs the rtnl_lock. | |
1619 | */ | |
1620 | static int efx_reset(struct efx_nic *efx) | |
1621 | { | |
1622 | struct ethtool_cmd ecmd; | |
1623 | enum reset_type method = efx->reset_pending; | |
1624 | int rc; | |
1625 | ||
1626 | /* Serialise with kernel interfaces */ | |
1627 | rtnl_lock(); | |
1628 | ||
1629 | /* If we're not RUNNING then don't reset. Leave the reset_pending | |
1630 | * flag set so that efx_pci_probe_main will be retried */ | |
1631 | if (efx->state != STATE_RUNNING) { | |
1632 | EFX_INFO(efx, "scheduled reset quenched. NIC not RUNNING\n"); | |
1633 | goto unlock_rtnl; | |
1634 | } | |
1635 | ||
1636 | efx->state = STATE_RESETTING; | |
1637 | EFX_INFO(efx, "resetting (%d)\n", method); | |
1638 | ||
1639 | /* The net_dev->get_stats handler is quite slow, and will fail | |
1640 | * if a fetch is pending over reset. Serialise against it. */ | |
1641 | spin_lock(&efx->stats_lock); | |
1642 | spin_unlock(&efx->stats_lock); | |
1643 | ||
1644 | efx_stop_all(efx); | |
1645 | mutex_lock(&efx->mac_lock); | |
1646 | ||
1647 | rc = efx_reset_down(efx, &ecmd); | |
1648 | if (rc) | |
1649 | goto fail1; | |
1650 | ||
1651 | rc = falcon_reset_hw(efx, method); | |
1652 | if (rc) { | |
1653 | EFX_ERR(efx, "failed to reset hardware\n"); | |
1654 | goto fail2; | |
1655 | } | |
1656 | ||
1657 | /* Allow resets to be rescheduled. */ | |
1658 | efx->reset_pending = RESET_TYPE_NONE; | |
1659 | ||
1660 | /* Reinitialise bus-mastering, which may have been turned off before | |
1661 | * the reset was scheduled. This is still appropriate, even in the | |
1662 | * RESET_TYPE_DISABLE since this driver generally assumes the hardware | |
1663 | * can respond to requests. */ | |
1664 | pci_set_master(efx->pci_dev); | |
1665 | ||
1666 | /* Reinitialise device. This is appropriate in the RESET_TYPE_DISABLE | |
1667 | * case so the driver can talk to external SRAM */ | |
1668 | rc = falcon_init_nic(efx); | |
1669 | if (rc) { | |
1670 | EFX_ERR(efx, "failed to initialise NIC\n"); | |
1671 | goto fail3; | |
1672 | } | |
1673 | ||
1674 | /* Leave device stopped if necessary */ | |
1675 | if (method == RESET_TYPE_DISABLE) { | |
1676 | /* Reinitialise the device anyway so the driver unload sequence | |
1677 | * can talk to the external SRAM */ | |
91ad757c | 1678 | falcon_init_nic(efx); |
8ceee660 BH |
1679 | rc = -EIO; |
1680 | goto fail4; | |
1681 | } | |
1682 | ||
1683 | rc = efx_reset_up(efx, &ecmd); | |
1684 | if (rc) | |
1685 | goto fail5; | |
1686 | ||
1687 | mutex_unlock(&efx->mac_lock); | |
1688 | EFX_LOG(efx, "reset complete\n"); | |
1689 | ||
1690 | efx->state = STATE_RUNNING; | |
1691 | efx_start_all(efx); | |
1692 | ||
1693 | unlock_rtnl: | |
1694 | rtnl_unlock(); | |
1695 | return 0; | |
1696 | ||
1697 | fail5: | |
1698 | fail4: | |
1699 | fail3: | |
1700 | fail2: | |
1701 | fail1: | |
1702 | EFX_ERR(efx, "has been disabled\n"); | |
1703 | efx->state = STATE_DISABLED; | |
1704 | ||
1705 | mutex_unlock(&efx->mac_lock); | |
1706 | rtnl_unlock(); | |
1707 | efx_unregister_netdev(efx); | |
1708 | efx_fini_port(efx); | |
1709 | return rc; | |
1710 | } | |
1711 | ||
1712 | /* The worker thread exists so that code that cannot sleep can | |
1713 | * schedule a reset for later. | |
1714 | */ | |
1715 | static void efx_reset_work(struct work_struct *data) | |
1716 | { | |
1717 | struct efx_nic *nic = container_of(data, struct efx_nic, reset_work); | |
1718 | ||
1719 | efx_reset(nic); | |
1720 | } | |
1721 | ||
1722 | void efx_schedule_reset(struct efx_nic *efx, enum reset_type type) | |
1723 | { | |
1724 | enum reset_type method; | |
1725 | ||
1726 | if (efx->reset_pending != RESET_TYPE_NONE) { | |
1727 | EFX_INFO(efx, "quenching already scheduled reset\n"); | |
1728 | return; | |
1729 | } | |
1730 | ||
1731 | switch (type) { | |
1732 | case RESET_TYPE_INVISIBLE: | |
1733 | case RESET_TYPE_ALL: | |
1734 | case RESET_TYPE_WORLD: | |
1735 | case RESET_TYPE_DISABLE: | |
1736 | method = type; | |
1737 | break; | |
1738 | case RESET_TYPE_RX_RECOVERY: | |
1739 | case RESET_TYPE_RX_DESC_FETCH: | |
1740 | case RESET_TYPE_TX_DESC_FETCH: | |
1741 | case RESET_TYPE_TX_SKIP: | |
1742 | method = RESET_TYPE_INVISIBLE; | |
1743 | break; | |
1744 | default: | |
1745 | method = RESET_TYPE_ALL; | |
1746 | break; | |
1747 | } | |
1748 | ||
1749 | if (method != type) | |
1750 | EFX_LOG(efx, "scheduling reset (%d:%d)\n", type, method); | |
1751 | else | |
1752 | EFX_LOG(efx, "scheduling reset (%d)\n", method); | |
1753 | ||
1754 | efx->reset_pending = method; | |
1755 | ||
1756 | queue_work(efx->workqueue, &efx->reset_work); | |
1757 | } | |
1758 | ||
1759 | /************************************************************************** | |
1760 | * | |
1761 | * List of NICs we support | |
1762 | * | |
1763 | **************************************************************************/ | |
1764 | ||
1765 | /* PCI device ID table */ | |
1766 | static struct pci_device_id efx_pci_table[] __devinitdata = { | |
1767 | {PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID), | |
1768 | .driver_data = (unsigned long) &falcon_a_nic_type}, | |
1769 | {PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID), | |
1770 | .driver_data = (unsigned long) &falcon_b_nic_type}, | |
1771 | {0} /* end of list */ | |
1772 | }; | |
1773 | ||
1774 | /************************************************************************** | |
1775 | * | |
1776 | * Dummy PHY/MAC/Board operations | |
1777 | * | |
1778 | * Can be used where the MAC does not implement this operation | |
1779 | * Needed so all function pointers are valid and do not have to be tested | |
1780 | * before use | |
1781 | * | |
1782 | **************************************************************************/ | |
1783 | int efx_port_dummy_op_int(struct efx_nic *efx) | |
1784 | { | |
1785 | return 0; | |
1786 | } | |
1787 | void efx_port_dummy_op_void(struct efx_nic *efx) {} | |
1788 | void efx_port_dummy_op_blink(struct efx_nic *efx, int blink) {} | |
1789 | ||
1790 | static struct efx_phy_operations efx_dummy_phy_operations = { | |
1791 | .init = efx_port_dummy_op_int, | |
1792 | .reconfigure = efx_port_dummy_op_void, | |
1793 | .check_hw = efx_port_dummy_op_int, | |
1794 | .fini = efx_port_dummy_op_void, | |
1795 | .clear_interrupt = efx_port_dummy_op_void, | |
1796 | .reset_xaui = efx_port_dummy_op_void, | |
1797 | }; | |
1798 | ||
1799 | /* Dummy board operations */ | |
1800 | static int efx_nic_dummy_op_int(struct efx_nic *nic) | |
1801 | { | |
1802 | return 0; | |
1803 | } | |
1804 | ||
1805 | static struct efx_board efx_dummy_board_info = { | |
1806 | .init = efx_nic_dummy_op_int, | |
1807 | .init_leds = efx_port_dummy_op_int, | |
1808 | .set_fault_led = efx_port_dummy_op_blink, | |
1809 | }; | |
1810 | ||
1811 | /************************************************************************** | |
1812 | * | |
1813 | * Data housekeeping | |
1814 | * | |
1815 | **************************************************************************/ | |
1816 | ||
1817 | /* This zeroes out and then fills in the invariants in a struct | |
1818 | * efx_nic (including all sub-structures). | |
1819 | */ | |
1820 | static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type, | |
1821 | struct pci_dev *pci_dev, struct net_device *net_dev) | |
1822 | { | |
1823 | struct efx_channel *channel; | |
1824 | struct efx_tx_queue *tx_queue; | |
1825 | struct efx_rx_queue *rx_queue; | |
1826 | int i, rc; | |
1827 | ||
1828 | /* Initialise common structures */ | |
1829 | memset(efx, 0, sizeof(*efx)); | |
1830 | spin_lock_init(&efx->biu_lock); | |
1831 | spin_lock_init(&efx->phy_lock); | |
1832 | INIT_WORK(&efx->reset_work, efx_reset_work); | |
1833 | INIT_DELAYED_WORK(&efx->monitor_work, efx_monitor); | |
1834 | efx->pci_dev = pci_dev; | |
1835 | efx->state = STATE_INIT; | |
1836 | efx->reset_pending = RESET_TYPE_NONE; | |
1837 | strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name)); | |
1838 | efx->board_info = efx_dummy_board_info; | |
1839 | ||
1840 | efx->net_dev = net_dev; | |
1841 | efx->rx_checksum_enabled = 1; | |
1842 | spin_lock_init(&efx->netif_stop_lock); | |
1843 | spin_lock_init(&efx->stats_lock); | |
1844 | mutex_init(&efx->mac_lock); | |
1845 | efx->phy_op = &efx_dummy_phy_operations; | |
1846 | efx->mii.dev = net_dev; | |
1847 | INIT_WORK(&efx->reconfigure_work, efx_reconfigure_work); | |
1848 | atomic_set(&efx->netif_stop_count, 1); | |
1849 | ||
1850 | for (i = 0; i < EFX_MAX_CHANNELS; i++) { | |
1851 | channel = &efx->channel[i]; | |
1852 | channel->efx = efx; | |
1853 | channel->channel = i; | |
1854 | channel->evqnum = i; | |
1855 | channel->work_pending = 0; | |
1856 | } | |
1857 | for (i = 0; i < EFX_MAX_TX_QUEUES; i++) { | |
1858 | tx_queue = &efx->tx_queue[i]; | |
1859 | tx_queue->efx = efx; | |
1860 | tx_queue->queue = i; | |
1861 | tx_queue->buffer = NULL; | |
1862 | tx_queue->channel = &efx->channel[0]; /* for safety */ | |
b9b39b62 | 1863 | tx_queue->tso_headers_free = NULL; |
8ceee660 BH |
1864 | } |
1865 | for (i = 0; i < EFX_MAX_RX_QUEUES; i++) { | |
1866 | rx_queue = &efx->rx_queue[i]; | |
1867 | rx_queue->efx = efx; | |
1868 | rx_queue->queue = i; | |
1869 | rx_queue->channel = &efx->channel[0]; /* for safety */ | |
1870 | rx_queue->buffer = NULL; | |
1871 | spin_lock_init(&rx_queue->add_lock); | |
1872 | INIT_DELAYED_WORK(&rx_queue->work, efx_rx_work); | |
1873 | } | |
1874 | ||
1875 | efx->type = type; | |
1876 | ||
1877 | /* Sanity-check NIC type */ | |
1878 | EFX_BUG_ON_PARANOID(efx->type->txd_ring_mask & | |
1879 | (efx->type->txd_ring_mask + 1)); | |
1880 | EFX_BUG_ON_PARANOID(efx->type->rxd_ring_mask & | |
1881 | (efx->type->rxd_ring_mask + 1)); | |
1882 | EFX_BUG_ON_PARANOID(efx->type->evq_size & | |
1883 | (efx->type->evq_size - 1)); | |
1884 | /* As close as we can get to guaranteeing that we don't overflow */ | |
1885 | EFX_BUG_ON_PARANOID(efx->type->evq_size < | |
1886 | (efx->type->txd_ring_mask + 1 + | |
1887 | efx->type->rxd_ring_mask + 1)); | |
1888 | EFX_BUG_ON_PARANOID(efx->type->phys_addr_channels > EFX_MAX_CHANNELS); | |
1889 | ||
1890 | /* Higher numbered interrupt modes are less capable! */ | |
1891 | efx->interrupt_mode = max(efx->type->max_interrupt_mode, | |
1892 | interrupt_mode); | |
1893 | ||
1894 | efx->workqueue = create_singlethread_workqueue("sfc_work"); | |
1895 | if (!efx->workqueue) { | |
1896 | rc = -ENOMEM; | |
1897 | goto fail1; | |
1898 | } | |
1899 | ||
1900 | return 0; | |
1901 | ||
1902 | fail1: | |
1903 | return rc; | |
1904 | } | |
1905 | ||
1906 | static void efx_fini_struct(struct efx_nic *efx) | |
1907 | { | |
1908 | if (efx->workqueue) { | |
1909 | destroy_workqueue(efx->workqueue); | |
1910 | efx->workqueue = NULL; | |
1911 | } | |
1912 | } | |
1913 | ||
1914 | /************************************************************************** | |
1915 | * | |
1916 | * PCI interface | |
1917 | * | |
1918 | **************************************************************************/ | |
1919 | ||
1920 | /* Main body of final NIC shutdown code | |
1921 | * This is called only at module unload (or hotplug removal). | |
1922 | */ | |
1923 | static void efx_pci_remove_main(struct efx_nic *efx) | |
1924 | { | |
1925 | EFX_ASSERT_RESET_SERIALISED(efx); | |
1926 | ||
1927 | /* Skip everything if we never obtained a valid membase */ | |
1928 | if (!efx->membase) | |
1929 | return; | |
1930 | ||
1931 | efx_fini_channels(efx); | |
1932 | efx_fini_port(efx); | |
1933 | ||
1934 | /* Shutdown the board, then the NIC and board state */ | |
1935 | falcon_fini_interrupt(efx); | |
1936 | ||
1937 | efx_fini_napi(efx); | |
1938 | efx_remove_all(efx); | |
1939 | } | |
1940 | ||
1941 | /* Final NIC shutdown | |
1942 | * This is called only at module unload (or hotplug removal). | |
1943 | */ | |
1944 | static void efx_pci_remove(struct pci_dev *pci_dev) | |
1945 | { | |
1946 | struct efx_nic *efx; | |
1947 | ||
1948 | efx = pci_get_drvdata(pci_dev); | |
1949 | if (!efx) | |
1950 | return; | |
1951 | ||
1952 | /* Mark the NIC as fini, then stop the interface */ | |
1953 | rtnl_lock(); | |
1954 | efx->state = STATE_FINI; | |
1955 | dev_close(efx->net_dev); | |
1956 | ||
1957 | /* Allow any queued efx_resets() to complete */ | |
1958 | rtnl_unlock(); | |
1959 | ||
1960 | if (efx->membase == NULL) | |
1961 | goto out; | |
1962 | ||
1963 | efx_unregister_netdev(efx); | |
1964 | ||
1965 | /* Wait for any scheduled resets to complete. No more will be | |
1966 | * scheduled from this point because efx_stop_all() has been | |
1967 | * called, we are no longer registered with driverlink, and | |
1968 | * the net_device's have been removed. */ | |
1969 | flush_workqueue(efx->workqueue); | |
1970 | ||
1971 | efx_pci_remove_main(efx); | |
1972 | ||
1973 | out: | |
1974 | efx_fini_io(efx); | |
1975 | EFX_LOG(efx, "shutdown successful\n"); | |
1976 | ||
1977 | pci_set_drvdata(pci_dev, NULL); | |
1978 | efx_fini_struct(efx); | |
1979 | free_netdev(efx->net_dev); | |
1980 | }; | |
1981 | ||
1982 | /* Main body of NIC initialisation | |
1983 | * This is called at module load (or hotplug insertion, theoretically). | |
1984 | */ | |
1985 | static int efx_pci_probe_main(struct efx_nic *efx) | |
1986 | { | |
1987 | int rc; | |
1988 | ||
1989 | /* Do start-of-day initialisation */ | |
1990 | rc = efx_probe_all(efx); | |
1991 | if (rc) | |
1992 | goto fail1; | |
1993 | ||
1994 | rc = efx_init_napi(efx); | |
1995 | if (rc) | |
1996 | goto fail2; | |
1997 | ||
1998 | /* Initialise the board */ | |
1999 | rc = efx->board_info.init(efx); | |
2000 | if (rc) { | |
2001 | EFX_ERR(efx, "failed to initialise board\n"); | |
2002 | goto fail3; | |
2003 | } | |
2004 | ||
2005 | rc = falcon_init_nic(efx); | |
2006 | if (rc) { | |
2007 | EFX_ERR(efx, "failed to initialise NIC\n"); | |
2008 | goto fail4; | |
2009 | } | |
2010 | ||
2011 | rc = efx_init_port(efx); | |
2012 | if (rc) { | |
2013 | EFX_ERR(efx, "failed to initialise port\n"); | |
2014 | goto fail5; | |
2015 | } | |
2016 | ||
2017 | rc = efx_init_channels(efx); | |
2018 | if (rc) | |
2019 | goto fail6; | |
2020 | ||
2021 | rc = falcon_init_interrupt(efx); | |
2022 | if (rc) | |
2023 | goto fail7; | |
2024 | ||
2025 | return 0; | |
2026 | ||
2027 | fail7: | |
2028 | efx_fini_channels(efx); | |
2029 | fail6: | |
2030 | efx_fini_port(efx); | |
2031 | fail5: | |
2032 | fail4: | |
2033 | fail3: | |
2034 | efx_fini_napi(efx); | |
2035 | fail2: | |
2036 | efx_remove_all(efx); | |
2037 | fail1: | |
2038 | return rc; | |
2039 | } | |
2040 | ||
2041 | /* NIC initialisation | |
2042 | * | |
2043 | * This is called at module load (or hotplug insertion, | |
2044 | * theoretically). It sets up PCI mappings, tests and resets the NIC, | |
2045 | * sets up and registers the network devices with the kernel and hooks | |
2046 | * the interrupt service routine. It does not prepare the device for | |
2047 | * transmission; this is left to the first time one of the network | |
2048 | * interfaces is brought up (i.e. efx_net_open). | |
2049 | */ | |
2050 | static int __devinit efx_pci_probe(struct pci_dev *pci_dev, | |
2051 | const struct pci_device_id *entry) | |
2052 | { | |
2053 | struct efx_nic_type *type = (struct efx_nic_type *) entry->driver_data; | |
2054 | struct net_device *net_dev; | |
2055 | struct efx_nic *efx; | |
2056 | int i, rc; | |
2057 | ||
2058 | /* Allocate and initialise a struct net_device and struct efx_nic */ | |
2059 | net_dev = alloc_etherdev(sizeof(*efx)); | |
2060 | if (!net_dev) | |
2061 | return -ENOMEM; | |
b9b39b62 BH |
2062 | net_dev->features |= (NETIF_F_IP_CSUM | NETIF_F_SG | |
2063 | NETIF_F_HIGHDMA | NETIF_F_TSO); | |
8ceee660 BH |
2064 | if (lro) |
2065 | net_dev->features |= NETIF_F_LRO; | |
2066 | efx = net_dev->priv; | |
2067 | pci_set_drvdata(pci_dev, efx); | |
2068 | rc = efx_init_struct(efx, type, pci_dev, net_dev); | |
2069 | if (rc) | |
2070 | goto fail1; | |
2071 | ||
2072 | EFX_INFO(efx, "Solarflare Communications NIC detected\n"); | |
2073 | ||
2074 | /* Set up basic I/O (BAR mappings etc) */ | |
2075 | rc = efx_init_io(efx); | |
2076 | if (rc) | |
2077 | goto fail2; | |
2078 | ||
2079 | /* No serialisation is required with the reset path because | |
2080 | * we're in STATE_INIT. */ | |
2081 | for (i = 0; i < 5; i++) { | |
2082 | rc = efx_pci_probe_main(efx); | |
2083 | if (rc == 0) | |
2084 | break; | |
2085 | ||
2086 | /* Serialise against efx_reset(). No more resets will be | |
2087 | * scheduled since efx_stop_all() has been called, and we | |
2088 | * have not and never have been registered with either | |
2089 | * the rtnetlink or driverlink layers. */ | |
2090 | cancel_work_sync(&efx->reset_work); | |
2091 | ||
2092 | /* Retry if a recoverably reset event has been scheduled */ | |
2093 | if ((efx->reset_pending != RESET_TYPE_INVISIBLE) && | |
2094 | (efx->reset_pending != RESET_TYPE_ALL)) | |
2095 | goto fail3; | |
2096 | ||
2097 | efx->reset_pending = RESET_TYPE_NONE; | |
2098 | } | |
2099 | ||
2100 | if (rc) { | |
2101 | EFX_ERR(efx, "Could not reset NIC\n"); | |
2102 | goto fail4; | |
2103 | } | |
2104 | ||
2105 | /* Switch to the running state before we expose the device to | |
2106 | * the OS. This is to ensure that the initial gathering of | |
2107 | * MAC stats succeeds. */ | |
2108 | rtnl_lock(); | |
2109 | efx->state = STATE_RUNNING; | |
2110 | rtnl_unlock(); | |
2111 | ||
2112 | rc = efx_register_netdev(efx); | |
2113 | if (rc) | |
2114 | goto fail5; | |
2115 | ||
2116 | EFX_LOG(efx, "initialisation successful\n"); | |
2117 | ||
2118 | return 0; | |
2119 | ||
2120 | fail5: | |
2121 | efx_pci_remove_main(efx); | |
2122 | fail4: | |
2123 | fail3: | |
2124 | efx_fini_io(efx); | |
2125 | fail2: | |
2126 | efx_fini_struct(efx); | |
2127 | fail1: | |
2128 | EFX_LOG(efx, "initialisation failed. rc=%d\n", rc); | |
2129 | free_netdev(net_dev); | |
2130 | return rc; | |
2131 | } | |
2132 | ||
2133 | static struct pci_driver efx_pci_driver = { | |
2134 | .name = EFX_DRIVER_NAME, | |
2135 | .id_table = efx_pci_table, | |
2136 | .probe = efx_pci_probe, | |
2137 | .remove = efx_pci_remove, | |
2138 | }; | |
2139 | ||
2140 | /************************************************************************** | |
2141 | * | |
2142 | * Kernel module interface | |
2143 | * | |
2144 | *************************************************************************/ | |
2145 | ||
2146 | module_param(interrupt_mode, uint, 0444); | |
2147 | MODULE_PARM_DESC(interrupt_mode, | |
2148 | "Interrupt mode (0=>MSIX 1=>MSI 2=>legacy)"); | |
2149 | ||
2150 | static int __init efx_init_module(void) | |
2151 | { | |
2152 | int rc; | |
2153 | ||
2154 | printk(KERN_INFO "Solarflare NET driver v" EFX_DRIVER_VERSION "\n"); | |
2155 | ||
2156 | rc = register_netdevice_notifier(&efx_netdev_notifier); | |
2157 | if (rc) | |
2158 | goto err_notifier; | |
2159 | ||
2160 | refill_workqueue = create_workqueue("sfc_refill"); | |
2161 | if (!refill_workqueue) { | |
2162 | rc = -ENOMEM; | |
2163 | goto err_refill; | |
2164 | } | |
2165 | ||
2166 | rc = pci_register_driver(&efx_pci_driver); | |
2167 | if (rc < 0) | |
2168 | goto err_pci; | |
2169 | ||
2170 | return 0; | |
2171 | ||
2172 | err_pci: | |
2173 | destroy_workqueue(refill_workqueue); | |
2174 | err_refill: | |
2175 | unregister_netdevice_notifier(&efx_netdev_notifier); | |
2176 | err_notifier: | |
2177 | return rc; | |
2178 | } | |
2179 | ||
2180 | static void __exit efx_exit_module(void) | |
2181 | { | |
2182 | printk(KERN_INFO "Solarflare NET driver unloading\n"); | |
2183 | ||
2184 | pci_unregister_driver(&efx_pci_driver); | |
2185 | destroy_workqueue(refill_workqueue); | |
2186 | unregister_netdevice_notifier(&efx_netdev_notifier); | |
2187 | ||
2188 | } | |
2189 | ||
2190 | module_init(efx_init_module); | |
2191 | module_exit(efx_exit_module); | |
2192 | ||
2193 | MODULE_AUTHOR("Michael Brown <mbrown@fensystems.co.uk> and " | |
2194 | "Solarflare Communications"); | |
2195 | MODULE_DESCRIPTION("Solarflare Communications network driver"); | |
2196 | MODULE_LICENSE("GPL"); | |
2197 | MODULE_DEVICE_TABLE(pci, efx_pci_table); |