Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* natsemi.c: A Linux PCI Ethernet driver for the NatSemi DP8381x series. */ |
2 | /* | |
3 | Written/copyright 1999-2001 by Donald Becker. | |
4 | Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com) | |
5 | Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com) | |
b27a16b7 | 6 | Portions copyright 2004 Harald Welte <laforge@gnumonks.org> |
1da177e4 LT |
7 | |
8 | This software may be used and distributed according to the terms of | |
9 | the GNU General Public License (GPL), incorporated herein by reference. | |
10 | Drivers based on or derived from this code fall under the GPL and must | |
11 | retain the authorship, copyright and license notice. This file is not | |
12 | a complete program and may only be used when the entire operating | |
13 | system is licensed under the GPL. License for under other terms may be | |
14 | available. Contact the original author for details. | |
15 | ||
16 | The original author may be reached as becker@scyld.com, or at | |
17 | Scyld Computing Corporation | |
18 | 410 Severn Ave., Suite 210 | |
19 | Annapolis MD 21403 | |
20 | ||
21 | Support information and updates available at | |
22 | http://www.scyld.com/network/netsemi.html | |
23 | ||
24 | ||
25 | Linux kernel modifications: | |
26 | ||
27 | Version 1.0.1: | |
28 | - Spinlock fixes | |
29 | - Bug fixes and better intr performance (Tjeerd) | |
30 | Version 1.0.2: | |
31 | - Now reads correct MAC address from eeprom | |
32 | Version 1.0.3: | |
33 | - Eliminate redundant priv->tx_full flag | |
34 | - Call netif_start_queue from dev->tx_timeout | |
35 | - wmb() in start_tx() to flush data | |
36 | - Update Tx locking | |
37 | - Clean up PCI enable (davej) | |
38 | Version 1.0.4: | |
39 | - Merge Donald Becker's natsemi.c version 1.07 | |
40 | Version 1.0.5: | |
41 | - { fill me in } | |
42 | Version 1.0.6: | |
43 | * ethtool support (jgarzik) | |
44 | * Proper initialization of the card (which sometimes | |
45 | fails to occur and leaves the card in a non-functional | |
46 | state). (uzi) | |
47 | ||
48 | * Some documented register settings to optimize some | |
49 | of the 100Mbit autodetection circuitry in rev C cards. (uzi) | |
50 | ||
51 | * Polling of the PHY intr for stuff like link state | |
52 | change and auto- negotiation to finally work properly. (uzi) | |
53 | ||
54 | * One-liner removal of a duplicate declaration of | |
55 | netdev_error(). (uzi) | |
56 | ||
57 | Version 1.0.7: (Manfred Spraul) | |
58 | * pci dma | |
59 | * SMP locking update | |
60 | * full reset added into tx_timeout | |
61 | * correct multicast hash generation (both big and little endian) | |
62 | [copied from a natsemi driver version | |
63 | from Myrio Corporation, Greg Smith] | |
64 | * suspend/resume | |
65 | ||
66 | version 1.0.8 (Tim Hockin <thockin@sun.com>) | |
67 | * ETHTOOL_* support | |
68 | * Wake on lan support (Erik Gilling) | |
69 | * MXDMA fixes for serverworks | |
70 | * EEPROM reload | |
71 | ||
72 | version 1.0.9 (Manfred Spraul) | |
73 | * Main change: fix lack of synchronize | |
74 | netif_close/netif_suspend against a last interrupt | |
75 | or packet. | |
76 | * do not enable superflous interrupts (e.g. the | |
77 | drivers relies on TxDone - TxIntr not needed) | |
78 | * wait that the hardware has really stopped in close | |
79 | and suspend. | |
80 | * workaround for the (at least) gcc-2.95.1 compiler | |
81 | problem. Also simplifies the code a bit. | |
82 | * disable_irq() in tx_timeout - needed to protect | |
83 | against rx interrupts. | |
84 | * stop the nic before switching into silent rx mode | |
85 | for wol (required according to docu). | |
86 | ||
87 | version 1.0.10: | |
88 | * use long for ee_addr (various) | |
89 | * print pointers properly (DaveM) | |
90 | * include asm/irq.h (?) | |
91 | ||
92 | version 1.0.11: | |
93 | * check and reset if PHY errors appear (Adrian Sun) | |
94 | * WoL cleanup (Tim Hockin) | |
95 | * Magic number cleanup (Tim Hockin) | |
96 | * Don't reload EEPROM on every reset (Tim Hockin) | |
97 | * Save and restore EEPROM state across reset (Tim Hockin) | |
98 | * MDIO Cleanup (Tim Hockin) | |
99 | * Reformat register offsets/bits (jgarzik) | |
100 | ||
101 | version 1.0.12: | |
102 | * ETHTOOL_* further support (Tim Hockin) | |
103 | ||
104 | version 1.0.13: | |
105 | * ETHTOOL_[G]EEPROM support (Tim Hockin) | |
106 | ||
107 | version 1.0.13: | |
108 | * crc cleanup (Matt Domsch <Matt_Domsch@dell.com>) | |
109 | ||
110 | version 1.0.14: | |
111 | * Cleanup some messages and autoneg in ethtool (Tim Hockin) | |
112 | ||
113 | version 1.0.15: | |
114 | * Get rid of cable_magic flag | |
115 | * use new (National provided) solution for cable magic issue | |
116 | ||
117 | version 1.0.16: | |
118 | * call netdev_rx() for RxErrors (Manfred Spraul) | |
119 | * formatting and cleanups | |
120 | * change options and full_duplex arrays to be zero | |
121 | initialized | |
122 | * enable only the WoL and PHY interrupts in wol mode | |
123 | ||
124 | version 1.0.17: | |
125 | * only do cable_magic on 83815 and early 83816 (Tim Hockin) | |
126 | * create a function for rx refill (Manfred Spraul) | |
127 | * combine drain_ring and init_ring (Manfred Spraul) | |
128 | * oom handling (Manfred Spraul) | |
129 | * hands_off instead of playing with netif_device_{de,a}ttach | |
130 | (Manfred Spraul) | |
131 | * be sure to write the MAC back to the chip (Manfred Spraul) | |
132 | * lengthen EEPROM timeout, and always warn about timeouts | |
133 | (Manfred Spraul) | |
134 | * comments update (Manfred) | |
135 | * do the right thing on a phy-reset (Manfred and Tim) | |
136 | ||
137 | TODO: | |
138 | * big endian support with CFG:BEM instead of cpu_to_le32 | |
1da177e4 LT |
139 | */ |
140 | ||
1da177e4 LT |
141 | #include <linux/module.h> |
142 | #include <linux/kernel.h> | |
143 | #include <linux/string.h> | |
144 | #include <linux/timer.h> | |
145 | #include <linux/errno.h> | |
146 | #include <linux/ioport.h> | |
147 | #include <linux/slab.h> | |
148 | #include <linux/interrupt.h> | |
149 | #include <linux/pci.h> | |
150 | #include <linux/netdevice.h> | |
151 | #include <linux/etherdevice.h> | |
152 | #include <linux/skbuff.h> | |
153 | #include <linux/init.h> | |
154 | #include <linux/spinlock.h> | |
155 | #include <linux/ethtool.h> | |
156 | #include <linux/delay.h> | |
157 | #include <linux/rtnetlink.h> | |
158 | #include <linux/mii.h> | |
159 | #include <linux/crc32.h> | |
160 | #include <linux/bitops.h> | |
b27a16b7 | 161 | #include <linux/prefetch.h> |
1da177e4 LT |
162 | #include <asm/processor.h> /* Processor type for cache alignment. */ |
163 | #include <asm/io.h> | |
164 | #include <asm/irq.h> | |
165 | #include <asm/uaccess.h> | |
166 | ||
167 | #define DRV_NAME "natsemi" | |
168 | #define DRV_VERSION "1.07+LK1.0.17" | |
169 | #define DRV_RELDATE "Sep 27, 2002" | |
170 | ||
171 | #define RX_OFFSET 2 | |
172 | ||
173 | /* Updated to recommendations in pci-skeleton v2.03. */ | |
174 | ||
175 | /* The user-configurable values. | |
176 | These may be modified when a driver module is loaded.*/ | |
177 | ||
178 | #define NATSEMI_DEF_MSG (NETIF_MSG_DRV | \ | |
179 | NETIF_MSG_LINK | \ | |
180 | NETIF_MSG_WOL | \ | |
181 | NETIF_MSG_RX_ERR | \ | |
182 | NETIF_MSG_TX_ERR) | |
183 | static int debug = -1; | |
184 | ||
1da177e4 LT |
185 | static int mtu; |
186 | ||
187 | /* Maximum number of multicast addresses to filter (vs. rx-all-multicast). | |
188 | This chip uses a 512 element hash table based on the Ethernet CRC. */ | |
f71e1309 | 189 | static const int multicast_filter_limit = 100; |
1da177e4 LT |
190 | |
191 | /* Set the copy breakpoint for the copy-only-tiny-frames scheme. | |
192 | Setting to > 1518 effectively disables this feature. */ | |
193 | static int rx_copybreak; | |
194 | ||
195 | /* Used to pass the media type, etc. | |
196 | Both 'options[]' and 'full_duplex[]' should exist for driver | |
197 | interoperability. | |
198 | The media type is usually passed in 'options[]'. | |
199 | */ | |
200 | #define MAX_UNITS 8 /* More are supported, limit only on options */ | |
201 | static int options[MAX_UNITS]; | |
202 | static int full_duplex[MAX_UNITS]; | |
203 | ||
204 | /* Operational parameters that are set at compile time. */ | |
205 | ||
206 | /* Keep the ring sizes a power of two for compile efficiency. | |
207 | The compiler will convert <unsigned>'%'<2^N> into a bit mask. | |
208 | Making the Tx ring too large decreases the effectiveness of channel | |
209 | bonding and packet priority. | |
210 | There are no ill effects from too-large receive rings. */ | |
211 | #define TX_RING_SIZE 16 | |
212 | #define TX_QUEUE_LEN 10 /* Limit ring entries actually used, min 4. */ | |
213 | #define RX_RING_SIZE 32 | |
214 | ||
215 | /* Operational parameters that usually are not changed. */ | |
216 | /* Time in jiffies before concluding the transmitter is hung. */ | |
217 | #define TX_TIMEOUT (2*HZ) | |
218 | ||
219 | #define NATSEMI_HW_TIMEOUT 400 | |
220 | #define NATSEMI_TIMER_FREQ 3*HZ | |
221 | #define NATSEMI_PG0_NREGS 64 | |
222 | #define NATSEMI_RFDR_NREGS 8 | |
223 | #define NATSEMI_PG1_NREGS 4 | |
224 | #define NATSEMI_NREGS (NATSEMI_PG0_NREGS + NATSEMI_RFDR_NREGS + \ | |
225 | NATSEMI_PG1_NREGS) | |
226 | #define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */ | |
227 | #define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32)) | |
1da177e4 LT |
228 | |
229 | /* Buffer sizes: | |
230 | * The nic writes 32-bit values, even if the upper bytes of | |
231 | * a 32-bit value are beyond the end of the buffer. | |
232 | */ | |
233 | #define NATSEMI_HEADERS 22 /* 2*mac,type,vlan,crc */ | |
234 | #define NATSEMI_PADDING 16 /* 2 bytes should be sufficient */ | |
235 | #define NATSEMI_LONGPKT 1518 /* limit for normal packets */ | |
236 | #define NATSEMI_RX_LIMIT 2046 /* maximum supported by hardware */ | |
237 | ||
238 | /* These identify the driver base version and may not be removed. */ | |
e19360f2 | 239 | static const char version[] __devinitdata = |
1da177e4 LT |
240 | KERN_INFO DRV_NAME " dp8381x driver, version " |
241 | DRV_VERSION ", " DRV_RELDATE "\n" | |
242 | KERN_INFO " originally by Donald Becker <becker@scyld.com>\n" | |
243 | KERN_INFO " http://www.scyld.com/network/natsemi.html\n" | |
244 | KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; | |
245 | ||
246 | MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); | |
247 | MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver"); | |
248 | MODULE_LICENSE("GPL"); | |
249 | ||
1da177e4 LT |
250 | module_param(mtu, int, 0); |
251 | module_param(debug, int, 0); | |
252 | module_param(rx_copybreak, int, 0); | |
253 | module_param_array(options, int, NULL, 0); | |
254 | module_param_array(full_duplex, int, NULL, 0); | |
1da177e4 LT |
255 | MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)"); |
256 | MODULE_PARM_DESC(debug, "DP8381x default debug level"); | |
257 | MODULE_PARM_DESC(rx_copybreak, | |
258 | "DP8381x copy breakpoint for copy-only-tiny-frames"); | |
259 | MODULE_PARM_DESC(options, | |
260 | "DP8381x: Bits 0-3: media type, bit 17: full duplex"); | |
261 | MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)"); | |
262 | ||
263 | /* | |
264 | Theory of Operation | |
265 | ||
266 | I. Board Compatibility | |
267 | ||
268 | This driver is designed for National Semiconductor DP83815 PCI Ethernet NIC. | |
269 | It also works with other chips in in the DP83810 series. | |
270 | ||
271 | II. Board-specific settings | |
272 | ||
273 | This driver requires the PCI interrupt line to be valid. | |
274 | It honors the EEPROM-set values. | |
275 | ||
276 | III. Driver operation | |
277 | ||
278 | IIIa. Ring buffers | |
279 | ||
280 | This driver uses two statically allocated fixed-size descriptor lists | |
281 | formed into rings by a branch from the final descriptor to the beginning of | |
282 | the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. | |
283 | The NatSemi design uses a 'next descriptor' pointer that the driver forms | |
284 | into a list. | |
285 | ||
286 | IIIb/c. Transmit/Receive Structure | |
287 | ||
288 | This driver uses a zero-copy receive and transmit scheme. | |
289 | The driver allocates full frame size skbuffs for the Rx ring buffers at | |
290 | open() time and passes the skb->data field to the chip as receive data | |
291 | buffers. When an incoming frame is less than RX_COPYBREAK bytes long, | |
292 | a fresh skbuff is allocated and the frame is copied to the new skbuff. | |
293 | When the incoming frame is larger, the skbuff is passed directly up the | |
294 | protocol stack. Buffers consumed this way are replaced by newly allocated | |
295 | skbuffs in a later phase of receives. | |
296 | ||
297 | The RX_COPYBREAK value is chosen to trade-off the memory wasted by | |
298 | using a full-sized skbuff for small frames vs. the copying costs of larger | |
299 | frames. New boards are typically used in generously configured machines | |
300 | and the underfilled buffers have negligible impact compared to the benefit of | |
301 | a single allocation size, so the default value of zero results in never | |
302 | copying packets. When copying is done, the cost is usually mitigated by using | |
303 | a combined copy/checksum routine. Copying also preloads the cache, which is | |
304 | most useful with small frames. | |
305 | ||
306 | A subtle aspect of the operation is that unaligned buffers are not permitted | |
307 | by the hardware. Thus the IP header at offset 14 in an ethernet frame isn't | |
308 | longword aligned for further processing. On copies frames are put into the | |
309 | skbuff at an offset of "+2", 16-byte aligning the IP header. | |
310 | ||
311 | IIId. Synchronization | |
312 | ||
313 | Most operations are synchronized on the np->lock irq spinlock, except the | |
314 | performance critical codepaths: | |
315 | ||
316 | The rx process only runs in the interrupt handler. Access from outside | |
317 | the interrupt handler is only permitted after disable_irq(). | |
318 | ||
932ff279 | 319 | The rx process usually runs under the netif_tx_lock. If np->intr_tx_reap |
1da177e4 LT |
320 | is set, then access is permitted under spin_lock_irq(&np->lock). |
321 | ||
322 | Thus configuration functions that want to access everything must call | |
323 | disable_irq(dev->irq); | |
932ff279 | 324 | netif_tx_lock_bh(dev); |
1da177e4 LT |
325 | spin_lock_irq(&np->lock); |
326 | ||
327 | IV. Notes | |
328 | ||
329 | NatSemi PCI network controllers are very uncommon. | |
330 | ||
331 | IVb. References | |
332 | ||
333 | http://www.scyld.com/expert/100mbps.html | |
334 | http://www.scyld.com/expert/NWay.html | |
335 | Datasheet is available from: | |
336 | http://www.national.com/pf/DP/DP83815.html | |
337 | ||
338 | IVc. Errata | |
339 | ||
340 | None characterised. | |
341 | */ | |
342 | ||
343 | ||
344 | ||
1da177e4 LT |
345 | /* |
346 | * Support for fibre connections on Am79C874: | |
347 | * This phy needs a special setup when connected to a fibre cable. | |
348 | * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf | |
349 | */ | |
350 | #define PHYID_AM79C874 0x0022561b | |
351 | ||
a2b524b2 JG |
352 | enum { |
353 | MII_MCTRL = 0x15, /* mode control register */ | |
354 | MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */ | |
355 | MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */ | |
356 | }; | |
1da177e4 LT |
357 | |
358 | ||
359 | /* array of board data directly indexed by pci_tbl[x].driver_data */ | |
f71e1309 | 360 | static const struct { |
1da177e4 LT |
361 | const char *name; |
362 | unsigned long flags; | |
a2b524b2 | 363 | unsigned int eeprom_size; |
1da177e4 | 364 | } natsemi_pci_info[] __devinitdata = { |
a2b524b2 | 365 | { "NatSemi DP8381[56]", 0, 24 }, |
1da177e4 LT |
366 | }; |
367 | ||
a2b524b2 JG |
368 | static const struct pci_device_id natsemi_pci_tbl[] __devinitdata = { |
369 | { PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
370 | { } /* terminate list */ | |
1da177e4 LT |
371 | }; |
372 | MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl); | |
373 | ||
374 | /* Offsets to the device registers. | |
375 | Unlike software-only systems, device drivers interact with complex hardware. | |
376 | It's not useful to define symbolic names for every register bit in the | |
377 | device. | |
378 | */ | |
379 | enum register_offsets { | |
380 | ChipCmd = 0x00, | |
381 | ChipConfig = 0x04, | |
382 | EECtrl = 0x08, | |
383 | PCIBusCfg = 0x0C, | |
384 | IntrStatus = 0x10, | |
385 | IntrMask = 0x14, | |
386 | IntrEnable = 0x18, | |
387 | IntrHoldoff = 0x1C, /* DP83816 only */ | |
388 | TxRingPtr = 0x20, | |
389 | TxConfig = 0x24, | |
390 | RxRingPtr = 0x30, | |
391 | RxConfig = 0x34, | |
392 | ClkRun = 0x3C, | |
393 | WOLCmd = 0x40, | |
394 | PauseCmd = 0x44, | |
395 | RxFilterAddr = 0x48, | |
396 | RxFilterData = 0x4C, | |
397 | BootRomAddr = 0x50, | |
398 | BootRomData = 0x54, | |
399 | SiliconRev = 0x58, | |
400 | StatsCtrl = 0x5C, | |
401 | StatsData = 0x60, | |
402 | RxPktErrs = 0x60, | |
403 | RxMissed = 0x68, | |
404 | RxCRCErrs = 0x64, | |
405 | BasicControl = 0x80, | |
406 | BasicStatus = 0x84, | |
407 | AnegAdv = 0x90, | |
408 | AnegPeer = 0x94, | |
409 | PhyStatus = 0xC0, | |
410 | MIntrCtrl = 0xC4, | |
411 | MIntrStatus = 0xC8, | |
412 | PhyCtrl = 0xE4, | |
413 | ||
414 | /* These are from the spec, around page 78... on a separate table. | |
415 | * The meaning of these registers depend on the value of PGSEL. */ | |
416 | PGSEL = 0xCC, | |
417 | PMDCSR = 0xE4, | |
418 | TSTDAT = 0xFC, | |
419 | DSPCFG = 0xF4, | |
420 | SDCFG = 0xF8 | |
421 | }; | |
422 | /* the values for the 'magic' registers above (PGSEL=1) */ | |
423 | #define PMDCSR_VAL 0x189c /* enable preferred adaptation circuitry */ | |
424 | #define TSTDAT_VAL 0x0 | |
425 | #define DSPCFG_VAL 0x5040 | |
426 | #define SDCFG_VAL 0x008c /* set voltage thresholds for Signal Detect */ | |
427 | #define DSPCFG_LOCK 0x20 /* coefficient lock bit in DSPCFG */ | |
428 | #define DSPCFG_COEF 0x1000 /* see coefficient (in TSTDAT) bit in DSPCFG */ | |
429 | #define TSTDAT_FIXED 0xe8 /* magic number for bad coefficients */ | |
430 | ||
431 | /* misc PCI space registers */ | |
432 | enum pci_register_offsets { | |
433 | PCIPM = 0x44, | |
434 | }; | |
435 | ||
436 | enum ChipCmd_bits { | |
437 | ChipReset = 0x100, | |
438 | RxReset = 0x20, | |
439 | TxReset = 0x10, | |
440 | RxOff = 0x08, | |
441 | RxOn = 0x04, | |
442 | TxOff = 0x02, | |
443 | TxOn = 0x01, | |
444 | }; | |
445 | ||
446 | enum ChipConfig_bits { | |
447 | CfgPhyDis = 0x200, | |
448 | CfgPhyRst = 0x400, | |
449 | CfgExtPhy = 0x1000, | |
450 | CfgAnegEnable = 0x2000, | |
451 | CfgAneg100 = 0x4000, | |
452 | CfgAnegFull = 0x8000, | |
453 | CfgAnegDone = 0x8000000, | |
454 | CfgFullDuplex = 0x20000000, | |
455 | CfgSpeed100 = 0x40000000, | |
456 | CfgLink = 0x80000000, | |
457 | }; | |
458 | ||
459 | enum EECtrl_bits { | |
460 | EE_ShiftClk = 0x04, | |
461 | EE_DataIn = 0x01, | |
462 | EE_ChipSelect = 0x08, | |
463 | EE_DataOut = 0x02, | |
464 | MII_Data = 0x10, | |
465 | MII_Write = 0x20, | |
466 | MII_ShiftClk = 0x40, | |
467 | }; | |
468 | ||
469 | enum PCIBusCfg_bits { | |
470 | EepromReload = 0x4, | |
471 | }; | |
472 | ||
473 | /* Bits in the interrupt status/mask registers. */ | |
474 | enum IntrStatus_bits { | |
475 | IntrRxDone = 0x0001, | |
476 | IntrRxIntr = 0x0002, | |
477 | IntrRxErr = 0x0004, | |
478 | IntrRxEarly = 0x0008, | |
479 | IntrRxIdle = 0x0010, | |
480 | IntrRxOverrun = 0x0020, | |
481 | IntrTxDone = 0x0040, | |
482 | IntrTxIntr = 0x0080, | |
483 | IntrTxErr = 0x0100, | |
484 | IntrTxIdle = 0x0200, | |
485 | IntrTxUnderrun = 0x0400, | |
486 | StatsMax = 0x0800, | |
487 | SWInt = 0x1000, | |
488 | WOLPkt = 0x2000, | |
489 | LinkChange = 0x4000, | |
490 | IntrHighBits = 0x8000, | |
491 | RxStatusFIFOOver = 0x10000, | |
492 | IntrPCIErr = 0xf00000, | |
493 | RxResetDone = 0x1000000, | |
494 | TxResetDone = 0x2000000, | |
495 | IntrAbnormalSummary = 0xCD20, | |
496 | }; | |
497 | ||
498 | /* | |
499 | * Default Interrupts: | |
500 | * Rx OK, Rx Packet Error, Rx Overrun, | |
501 | * Tx OK, Tx Packet Error, Tx Underrun, | |
502 | * MIB Service, Phy Interrupt, High Bits, | |
503 | * Rx Status FIFO overrun, | |
504 | * Received Target Abort, Received Master Abort, | |
505 | * Signalled System Error, Received Parity Error | |
506 | */ | |
507 | #define DEFAULT_INTR 0x00f1cd65 | |
508 | ||
509 | enum TxConfig_bits { | |
510 | TxDrthMask = 0x3f, | |
511 | TxFlthMask = 0x3f00, | |
512 | TxMxdmaMask = 0x700000, | |
513 | TxMxdma_512 = 0x0, | |
514 | TxMxdma_4 = 0x100000, | |
515 | TxMxdma_8 = 0x200000, | |
516 | TxMxdma_16 = 0x300000, | |
517 | TxMxdma_32 = 0x400000, | |
518 | TxMxdma_64 = 0x500000, | |
519 | TxMxdma_128 = 0x600000, | |
520 | TxMxdma_256 = 0x700000, | |
521 | TxCollRetry = 0x800000, | |
522 | TxAutoPad = 0x10000000, | |
523 | TxMacLoop = 0x20000000, | |
524 | TxHeartIgn = 0x40000000, | |
525 | TxCarrierIgn = 0x80000000 | |
526 | }; | |
527 | ||
528 | /* | |
529 | * Tx Configuration: | |
530 | * - 256 byte DMA burst length | |
531 | * - fill threshold 512 bytes (i.e. restart DMA when 512 bytes are free) | |
532 | * - 64 bytes initial drain threshold (i.e. begin actual transmission | |
533 | * when 64 byte are in the fifo) | |
534 | * - on tx underruns, increase drain threshold by 64. | |
535 | * - at most use a drain threshold of 1472 bytes: The sum of the fill | |
536 | * threshold and the drain threshold must be less than 2016 bytes. | |
537 | * | |
538 | */ | |
539 | #define TX_FLTH_VAL ((512/32) << 8) | |
540 | #define TX_DRTH_VAL_START (64/32) | |
541 | #define TX_DRTH_VAL_INC 2 | |
542 | #define TX_DRTH_VAL_LIMIT (1472/32) | |
543 | ||
544 | enum RxConfig_bits { | |
545 | RxDrthMask = 0x3e, | |
546 | RxMxdmaMask = 0x700000, | |
547 | RxMxdma_512 = 0x0, | |
548 | RxMxdma_4 = 0x100000, | |
549 | RxMxdma_8 = 0x200000, | |
550 | RxMxdma_16 = 0x300000, | |
551 | RxMxdma_32 = 0x400000, | |
552 | RxMxdma_64 = 0x500000, | |
553 | RxMxdma_128 = 0x600000, | |
554 | RxMxdma_256 = 0x700000, | |
555 | RxAcceptLong = 0x8000000, | |
556 | RxAcceptTx = 0x10000000, | |
557 | RxAcceptRunt = 0x40000000, | |
558 | RxAcceptErr = 0x80000000 | |
559 | }; | |
560 | #define RX_DRTH_VAL (128/8) | |
561 | ||
562 | enum ClkRun_bits { | |
563 | PMEEnable = 0x100, | |
564 | PMEStatus = 0x8000, | |
565 | }; | |
566 | ||
567 | enum WolCmd_bits { | |
568 | WakePhy = 0x1, | |
569 | WakeUnicast = 0x2, | |
570 | WakeMulticast = 0x4, | |
571 | WakeBroadcast = 0x8, | |
572 | WakeArp = 0x10, | |
573 | WakePMatch0 = 0x20, | |
574 | WakePMatch1 = 0x40, | |
575 | WakePMatch2 = 0x80, | |
576 | WakePMatch3 = 0x100, | |
577 | WakeMagic = 0x200, | |
578 | WakeMagicSecure = 0x400, | |
579 | SecureHack = 0x100000, | |
580 | WokePhy = 0x400000, | |
581 | WokeUnicast = 0x800000, | |
582 | WokeMulticast = 0x1000000, | |
583 | WokeBroadcast = 0x2000000, | |
584 | WokeArp = 0x4000000, | |
585 | WokePMatch0 = 0x8000000, | |
586 | WokePMatch1 = 0x10000000, | |
587 | WokePMatch2 = 0x20000000, | |
588 | WokePMatch3 = 0x40000000, | |
589 | WokeMagic = 0x80000000, | |
590 | WakeOptsSummary = 0x7ff | |
591 | }; | |
592 | ||
593 | enum RxFilterAddr_bits { | |
594 | RFCRAddressMask = 0x3ff, | |
595 | AcceptMulticast = 0x00200000, | |
596 | AcceptMyPhys = 0x08000000, | |
597 | AcceptAllPhys = 0x10000000, | |
598 | AcceptAllMulticast = 0x20000000, | |
599 | AcceptBroadcast = 0x40000000, | |
600 | RxFilterEnable = 0x80000000 | |
601 | }; | |
602 | ||
603 | enum StatsCtrl_bits { | |
604 | StatsWarn = 0x1, | |
605 | StatsFreeze = 0x2, | |
606 | StatsClear = 0x4, | |
607 | StatsStrobe = 0x8, | |
608 | }; | |
609 | ||
610 | enum MIntrCtrl_bits { | |
611 | MICRIntEn = 0x2, | |
612 | }; | |
613 | ||
614 | enum PhyCtrl_bits { | |
615 | PhyAddrMask = 0x1f, | |
616 | }; | |
617 | ||
618 | #define PHY_ADDR_NONE 32 | |
619 | #define PHY_ADDR_INTERNAL 1 | |
620 | ||
621 | /* values we might find in the silicon revision register */ | |
622 | #define SRR_DP83815_C 0x0302 | |
623 | #define SRR_DP83815_D 0x0403 | |
624 | #define SRR_DP83816_A4 0x0504 | |
625 | #define SRR_DP83816_A5 0x0505 | |
626 | ||
627 | /* The Rx and Tx buffer descriptors. */ | |
628 | /* Note that using only 32 bit fields simplifies conversion to big-endian | |
629 | architectures. */ | |
630 | struct netdev_desc { | |
631 | u32 next_desc; | |
632 | s32 cmd_status; | |
633 | u32 addr; | |
634 | u32 software_use; | |
635 | }; | |
636 | ||
637 | /* Bits in network_desc.status */ | |
638 | enum desc_status_bits { | |
639 | DescOwn=0x80000000, DescMore=0x40000000, DescIntr=0x20000000, | |
640 | DescNoCRC=0x10000000, DescPktOK=0x08000000, | |
641 | DescSizeMask=0xfff, | |
642 | ||
643 | DescTxAbort=0x04000000, DescTxFIFO=0x02000000, | |
644 | DescTxCarrier=0x01000000, DescTxDefer=0x00800000, | |
645 | DescTxExcDefer=0x00400000, DescTxOOWCol=0x00200000, | |
646 | DescTxExcColl=0x00100000, DescTxCollCount=0x000f0000, | |
647 | ||
648 | DescRxAbort=0x04000000, DescRxOver=0x02000000, | |
649 | DescRxDest=0x01800000, DescRxLong=0x00400000, | |
650 | DescRxRunt=0x00200000, DescRxInvalid=0x00100000, | |
651 | DescRxCRC=0x00080000, DescRxAlign=0x00040000, | |
652 | DescRxLoop=0x00020000, DesRxColl=0x00010000, | |
653 | }; | |
654 | ||
655 | struct netdev_private { | |
656 | /* Descriptor rings first for alignment */ | |
657 | dma_addr_t ring_dma; | |
658 | struct netdev_desc *rx_ring; | |
659 | struct netdev_desc *tx_ring; | |
660 | /* The addresses of receive-in-place skbuffs */ | |
661 | struct sk_buff *rx_skbuff[RX_RING_SIZE]; | |
662 | dma_addr_t rx_dma[RX_RING_SIZE]; | |
663 | /* address of a sent-in-place packet/buffer, for later free() */ | |
664 | struct sk_buff *tx_skbuff[TX_RING_SIZE]; | |
665 | dma_addr_t tx_dma[TX_RING_SIZE]; | |
666 | struct net_device_stats stats; | |
667 | /* Media monitoring timer */ | |
668 | struct timer_list timer; | |
669 | /* Frequently used values: keep some adjacent for cache effect */ | |
670 | struct pci_dev *pci_dev; | |
671 | struct netdev_desc *rx_head_desc; | |
672 | /* Producer/consumer ring indices */ | |
673 | unsigned int cur_rx, dirty_rx; | |
674 | unsigned int cur_tx, dirty_tx; | |
675 | /* Based on MTU+slack. */ | |
676 | unsigned int rx_buf_sz; | |
677 | int oom; | |
b27a16b7 MB |
678 | /* Interrupt status */ |
679 | u32 intr_status; | |
1da177e4 LT |
680 | /* Do not touch the nic registers */ |
681 | int hands_off; | |
682 | /* external phy that is used: only valid if dev->if_port != PORT_TP */ | |
683 | int mii; | |
684 | int phy_addr_external; | |
685 | unsigned int full_duplex; | |
686 | /* Rx filter */ | |
687 | u32 cur_rx_mode; | |
688 | u32 rx_filter[16]; | |
689 | /* FIFO and PCI burst thresholds */ | |
690 | u32 tx_config, rx_config; | |
691 | /* original contents of ClkRun register */ | |
692 | u32 SavedClkRun; | |
693 | /* silicon revision */ | |
694 | u32 srr; | |
695 | /* expected DSPCFG value */ | |
696 | u16 dspcfg; | |
697 | /* parms saved in ethtool format */ | |
698 | u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ | |
699 | u8 duplex; /* Duplex, half or full */ | |
700 | u8 autoneg; /* Autonegotiation enabled */ | |
701 | /* MII transceiver section */ | |
702 | u16 advertising; | |
703 | unsigned int iosize; | |
704 | spinlock_t lock; | |
705 | u32 msg_enable; | |
a8b4cf42 MB |
706 | /* EEPROM data */ |
707 | int eeprom_size; | |
1da177e4 LT |
708 | }; |
709 | ||
710 | static void move_int_phy(struct net_device *dev, int addr); | |
711 | static int eeprom_read(void __iomem *ioaddr, int location); | |
712 | static int mdio_read(struct net_device *dev, int reg); | |
713 | static void mdio_write(struct net_device *dev, int reg, u16 data); | |
714 | static void init_phy_fixup(struct net_device *dev); | |
715 | static int miiport_read(struct net_device *dev, int phy_id, int reg); | |
716 | static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data); | |
717 | static int find_mii(struct net_device *dev); | |
718 | static void natsemi_reset(struct net_device *dev); | |
719 | static void natsemi_reload_eeprom(struct net_device *dev); | |
720 | static void natsemi_stop_rxtx(struct net_device *dev); | |
721 | static int netdev_open(struct net_device *dev); | |
722 | static void do_cable_magic(struct net_device *dev); | |
723 | static void undo_cable_magic(struct net_device *dev); | |
724 | static void check_link(struct net_device *dev); | |
725 | static void netdev_timer(unsigned long data); | |
726 | static void dump_ring(struct net_device *dev); | |
727 | static void tx_timeout(struct net_device *dev); | |
728 | static int alloc_ring(struct net_device *dev); | |
729 | static void refill_rx(struct net_device *dev); | |
730 | static void init_ring(struct net_device *dev); | |
731 | static void drain_tx(struct net_device *dev); | |
732 | static void drain_ring(struct net_device *dev); | |
733 | static void free_ring(struct net_device *dev); | |
734 | static void reinit_ring(struct net_device *dev); | |
735 | static void init_registers(struct net_device *dev); | |
736 | static int start_tx(struct sk_buff *skb, struct net_device *dev); | |
737 | static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs); | |
738 | static void netdev_error(struct net_device *dev, int intr_status); | |
b27a16b7 MB |
739 | static int natsemi_poll(struct net_device *dev, int *budget); |
740 | static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do); | |
1da177e4 LT |
741 | static void netdev_tx_done(struct net_device *dev); |
742 | static int natsemi_change_mtu(struct net_device *dev, int new_mtu); | |
743 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
744 | static void natsemi_poll_controller(struct net_device *dev); | |
745 | #endif | |
746 | static void __set_rx_mode(struct net_device *dev); | |
747 | static void set_rx_mode(struct net_device *dev); | |
748 | static void __get_stats(struct net_device *dev); | |
749 | static struct net_device_stats *get_stats(struct net_device *dev); | |
750 | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
751 | static int netdev_set_wol(struct net_device *dev, u32 newval); | |
752 | static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur); | |
753 | static int netdev_set_sopass(struct net_device *dev, u8 *newval); | |
754 | static int netdev_get_sopass(struct net_device *dev, u8 *data); | |
755 | static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd); | |
756 | static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd); | |
757 | static void enable_wol_mode(struct net_device *dev, int enable_intr); | |
758 | static int netdev_close(struct net_device *dev); | |
759 | static int netdev_get_regs(struct net_device *dev, u8 *buf); | |
760 | static int netdev_get_eeprom(struct net_device *dev, u8 *buf); | |
761 | static struct ethtool_ops ethtool_ops; | |
762 | ||
763 | static inline void __iomem *ns_ioaddr(struct net_device *dev) | |
764 | { | |
765 | return (void __iomem *) dev->base_addr; | |
766 | } | |
767 | ||
b27a16b7 MB |
768 | static inline void natsemi_irq_enable(struct net_device *dev) |
769 | { | |
770 | writel(1, ns_ioaddr(dev) + IntrEnable); | |
771 | readl(ns_ioaddr(dev) + IntrEnable); | |
772 | } | |
773 | ||
774 | static inline void natsemi_irq_disable(struct net_device *dev) | |
775 | { | |
776 | writel(0, ns_ioaddr(dev) + IntrEnable); | |
777 | readl(ns_ioaddr(dev) + IntrEnable); | |
778 | } | |
779 | ||
1da177e4 LT |
780 | static void move_int_phy(struct net_device *dev, int addr) |
781 | { | |
782 | struct netdev_private *np = netdev_priv(dev); | |
783 | void __iomem *ioaddr = ns_ioaddr(dev); | |
784 | int target = 31; | |
785 | ||
786 | /* | |
787 | * The internal phy is visible on the external mii bus. Therefore we must | |
788 | * move it away before we can send commands to an external phy. | |
789 | * There are two addresses we must avoid: | |
790 | * - the address on the external phy that is used for transmission. | |
791 | * - the address that we want to access. User space can access phys | |
792 | * on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independant from the | |
793 | * phy that is used for transmission. | |
794 | */ | |
795 | ||
796 | if (target == addr) | |
797 | target--; | |
798 | if (target == np->phy_addr_external) | |
799 | target--; | |
800 | writew(target, ioaddr + PhyCtrl); | |
801 | readw(ioaddr + PhyCtrl); | |
802 | udelay(1); | |
803 | } | |
804 | ||
5a40f09b JG |
805 | static void __devinit natsemi_init_media (struct net_device *dev) |
806 | { | |
807 | struct netdev_private *np = netdev_priv(dev); | |
808 | u32 tmp; | |
809 | ||
810 | netif_carrier_off(dev); | |
811 | ||
812 | /* get the initial settings from hardware */ | |
813 | tmp = mdio_read(dev, MII_BMCR); | |
814 | np->speed = (tmp & BMCR_SPEED100)? SPEED_100 : SPEED_10; | |
815 | np->duplex = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL : DUPLEX_HALF; | |
816 | np->autoneg = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE; | |
817 | np->advertising= mdio_read(dev, MII_ADVERTISE); | |
818 | ||
819 | if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL | |
820 | && netif_msg_probe(np)) { | |
821 | printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s " | |
822 | "10%s %s duplex.\n", | |
823 | pci_name(np->pci_dev), | |
824 | (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)? | |
825 | "enabled, advertise" : "disabled, force", | |
826 | (np->advertising & | |
827 | (ADVERTISE_100FULL|ADVERTISE_100HALF))? | |
828 | "0" : "", | |
829 | (np->advertising & | |
830 | (ADVERTISE_100FULL|ADVERTISE_10FULL))? | |
831 | "full" : "half"); | |
832 | } | |
833 | if (netif_msg_probe(np)) | |
834 | printk(KERN_INFO | |
835 | "natsemi %s: Transceiver status %#04x advertising %#04x.\n", | |
836 | pci_name(np->pci_dev), mdio_read(dev, MII_BMSR), | |
837 | np->advertising); | |
838 | ||
839 | } | |
840 | ||
1da177e4 LT |
841 | static int __devinit natsemi_probe1 (struct pci_dev *pdev, |
842 | const struct pci_device_id *ent) | |
843 | { | |
844 | struct net_device *dev; | |
845 | struct netdev_private *np; | |
846 | int i, option, irq, chip_idx = ent->driver_data; | |
847 | static int find_cnt = -1; | |
848 | unsigned long iostart, iosize; | |
849 | void __iomem *ioaddr; | |
850 | const int pcibar = 1; /* PCI base address register */ | |
851 | int prev_eedata; | |
852 | u32 tmp; | |
853 | ||
854 | /* when built into the kernel, we only print version if device is found */ | |
855 | #ifndef MODULE | |
856 | static int printed_version; | |
857 | if (!printed_version++) | |
858 | printk(version); | |
859 | #endif | |
860 | ||
861 | i = pci_enable_device(pdev); | |
862 | if (i) return i; | |
863 | ||
864 | /* natsemi has a non-standard PM control register | |
865 | * in PCI config space. Some boards apparently need | |
866 | * to be brought to D0 in this manner. | |
867 | */ | |
868 | pci_read_config_dword(pdev, PCIPM, &tmp); | |
869 | if (tmp & PCI_PM_CTRL_STATE_MASK) { | |
870 | /* D0 state, disable PME assertion */ | |
871 | u32 newtmp = tmp & ~PCI_PM_CTRL_STATE_MASK; | |
872 | pci_write_config_dword(pdev, PCIPM, newtmp); | |
873 | } | |
874 | ||
875 | find_cnt++; | |
876 | iostart = pci_resource_start(pdev, pcibar); | |
877 | iosize = pci_resource_len(pdev, pcibar); | |
878 | irq = pdev->irq; | |
879 | ||
a2b524b2 | 880 | pci_set_master(pdev); |
1da177e4 LT |
881 | |
882 | dev = alloc_etherdev(sizeof (struct netdev_private)); | |
883 | if (!dev) | |
884 | return -ENOMEM; | |
885 | SET_MODULE_OWNER(dev); | |
886 | SET_NETDEV_DEV(dev, &pdev->dev); | |
887 | ||
888 | i = pci_request_regions(pdev, DRV_NAME); | |
889 | if (i) | |
890 | goto err_pci_request_regions; | |
891 | ||
892 | ioaddr = ioremap(iostart, iosize); | |
893 | if (!ioaddr) { | |
894 | i = -ENOMEM; | |
895 | goto err_ioremap; | |
896 | } | |
897 | ||
898 | /* Work around the dropped serial bit. */ | |
899 | prev_eedata = eeprom_read(ioaddr, 6); | |
900 | for (i = 0; i < 3; i++) { | |
901 | int eedata = eeprom_read(ioaddr, i + 7); | |
902 | dev->dev_addr[i*2] = (eedata << 1) + (prev_eedata >> 15); | |
903 | dev->dev_addr[i*2+1] = eedata >> 7; | |
904 | prev_eedata = eedata; | |
905 | } | |
906 | ||
907 | dev->base_addr = (unsigned long __force) ioaddr; | |
908 | dev->irq = irq; | |
909 | ||
910 | np = netdev_priv(dev); | |
911 | ||
912 | np->pci_dev = pdev; | |
913 | pci_set_drvdata(pdev, dev); | |
914 | np->iosize = iosize; | |
915 | spin_lock_init(&np->lock); | |
916 | np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG; | |
917 | np->hands_off = 0; | |
b27a16b7 | 918 | np->intr_status = 0; |
a2b524b2 | 919 | np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size; |
1da177e4 LT |
920 | |
921 | /* Initial port: | |
922 | * - If the nic was configured to use an external phy and if find_mii | |
923 | * finds a phy: use external port, first phy that replies. | |
924 | * - Otherwise: internal port. | |
925 | * Note that the phy address for the internal phy doesn't matter: | |
926 | * The address would be used to access a phy over the mii bus, but | |
927 | * the internal phy is accessed through mapped registers. | |
928 | */ | |
929 | if (readl(ioaddr + ChipConfig) & CfgExtPhy) | |
930 | dev->if_port = PORT_MII; | |
931 | else | |
932 | dev->if_port = PORT_TP; | |
933 | /* Reset the chip to erase previous misconfiguration. */ | |
934 | natsemi_reload_eeprom(dev); | |
935 | natsemi_reset(dev); | |
936 | ||
937 | if (dev->if_port != PORT_TP) { | |
938 | np->phy_addr_external = find_mii(dev); | |
939 | if (np->phy_addr_external == PHY_ADDR_NONE) { | |
940 | dev->if_port = PORT_TP; | |
941 | np->phy_addr_external = PHY_ADDR_INTERNAL; | |
942 | } | |
943 | } else { | |
944 | np->phy_addr_external = PHY_ADDR_INTERNAL; | |
945 | } | |
946 | ||
947 | option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; | |
948 | if (dev->mem_start) | |
949 | option = dev->mem_start; | |
950 | ||
951 | /* The lower four bits are the media type. */ | |
952 | if (option) { | |
953 | if (option & 0x200) | |
954 | np->full_duplex = 1; | |
955 | if (option & 15) | |
956 | printk(KERN_INFO | |
957 | "natsemi %s: ignoring user supplied media type %d", | |
958 | pci_name(np->pci_dev), option & 15); | |
959 | } | |
960 | if (find_cnt < MAX_UNITS && full_duplex[find_cnt]) | |
961 | np->full_duplex = 1; | |
962 | ||
963 | /* The chip-specific entries in the device structure. */ | |
964 | dev->open = &netdev_open; | |
965 | dev->hard_start_xmit = &start_tx; | |
966 | dev->stop = &netdev_close; | |
967 | dev->get_stats = &get_stats; | |
968 | dev->set_multicast_list = &set_rx_mode; | |
969 | dev->change_mtu = &natsemi_change_mtu; | |
970 | dev->do_ioctl = &netdev_ioctl; | |
971 | dev->tx_timeout = &tx_timeout; | |
972 | dev->watchdog_timeo = TX_TIMEOUT; | |
b27a16b7 MB |
973 | dev->poll = natsemi_poll; |
974 | dev->weight = 64; | |
975 | ||
1da177e4 LT |
976 | #ifdef CONFIG_NET_POLL_CONTROLLER |
977 | dev->poll_controller = &natsemi_poll_controller; | |
978 | #endif | |
979 | SET_ETHTOOL_OPS(dev, ðtool_ops); | |
980 | ||
981 | if (mtu) | |
982 | dev->mtu = mtu; | |
983 | ||
5a40f09b | 984 | natsemi_init_media(dev); |
1da177e4 LT |
985 | |
986 | /* save the silicon revision for later querying */ | |
987 | np->srr = readl(ioaddr + SiliconRev); | |
988 | if (netif_msg_hw(np)) | |
989 | printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n", | |
990 | pci_name(np->pci_dev), np->srr); | |
991 | ||
992 | i = register_netdev(dev); | |
993 | if (i) | |
994 | goto err_register_netdev; | |
995 | ||
996 | if (netif_msg_drv(np)) { | |
997 | printk(KERN_INFO "natsemi %s: %s at %#08lx (%s), ", | |
998 | dev->name, natsemi_pci_info[chip_idx].name, iostart, | |
999 | pci_name(np->pci_dev)); | |
1000 | for (i = 0; i < ETH_ALEN-1; i++) | |
1001 | printk("%02x:", dev->dev_addr[i]); | |
1002 | printk("%02x, IRQ %d", dev->dev_addr[i], irq); | |
1003 | if (dev->if_port == PORT_TP) | |
1004 | printk(", port TP.\n"); | |
1005 | else | |
1006 | printk(", port MII, phy ad %d.\n", np->phy_addr_external); | |
1007 | } | |
1008 | return 0; | |
1009 | ||
1010 | err_register_netdev: | |
1011 | iounmap(ioaddr); | |
1012 | ||
1013 | err_ioremap: | |
1014 | pci_release_regions(pdev); | |
1015 | pci_set_drvdata(pdev, NULL); | |
1016 | ||
1017 | err_pci_request_regions: | |
1018 | free_netdev(dev); | |
1019 | return i; | |
1020 | } | |
1021 | ||
1022 | ||
1023 | /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. | |
1024 | The EEPROM code is for the common 93c06/46 EEPROMs with 6 bit addresses. */ | |
1025 | ||
1026 | /* Delay between EEPROM clock transitions. | |
1027 | No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need | |
1028 | a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that | |
1029 | made udelay() unreliable. | |
1030 | The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is | |
1031 | depricated. | |
1032 | */ | |
1033 | #define eeprom_delay(ee_addr) readl(ee_addr) | |
1034 | ||
1035 | #define EE_Write0 (EE_ChipSelect) | |
1036 | #define EE_Write1 (EE_ChipSelect | EE_DataIn) | |
1037 | ||
1038 | /* The EEPROM commands include the alway-set leading bit. */ | |
1039 | enum EEPROM_Cmds { | |
1040 | EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), | |
1041 | }; | |
1042 | ||
1043 | static int eeprom_read(void __iomem *addr, int location) | |
1044 | { | |
1045 | int i; | |
1046 | int retval = 0; | |
1047 | void __iomem *ee_addr = addr + EECtrl; | |
1048 | int read_cmd = location | EE_ReadCmd; | |
1049 | ||
1050 | writel(EE_Write0, ee_addr); | |
1051 | ||
1052 | /* Shift the read command bits out. */ | |
1053 | for (i = 10; i >= 0; i--) { | |
1054 | short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; | |
1055 | writel(dataval, ee_addr); | |
1056 | eeprom_delay(ee_addr); | |
1057 | writel(dataval | EE_ShiftClk, ee_addr); | |
1058 | eeprom_delay(ee_addr); | |
1059 | } | |
1060 | writel(EE_ChipSelect, ee_addr); | |
1061 | eeprom_delay(ee_addr); | |
1062 | ||
1063 | for (i = 0; i < 16; i++) { | |
1064 | writel(EE_ChipSelect | EE_ShiftClk, ee_addr); | |
1065 | eeprom_delay(ee_addr); | |
1066 | retval |= (readl(ee_addr) & EE_DataOut) ? 1 << i : 0; | |
1067 | writel(EE_ChipSelect, ee_addr); | |
1068 | eeprom_delay(ee_addr); | |
1069 | } | |
1070 | ||
1071 | /* Terminate the EEPROM access. */ | |
1072 | writel(EE_Write0, ee_addr); | |
1073 | writel(0, ee_addr); | |
1074 | return retval; | |
1075 | } | |
1076 | ||
1077 | /* MII transceiver control section. | |
1078 | * The 83815 series has an internal transceiver, and we present the | |
1079 | * internal management registers as if they were MII connected. | |
1080 | * External Phy registers are referenced through the MII interface. | |
1081 | */ | |
1082 | ||
1083 | /* clock transitions >= 20ns (25MHz) | |
1084 | * One readl should be good to PCI @ 100MHz | |
1085 | */ | |
1086 | #define mii_delay(ioaddr) readl(ioaddr + EECtrl) | |
1087 | ||
1088 | static int mii_getbit (struct net_device *dev) | |
1089 | { | |
1090 | int data; | |
1091 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1092 | ||
1093 | writel(MII_ShiftClk, ioaddr + EECtrl); | |
1094 | data = readl(ioaddr + EECtrl); | |
1095 | writel(0, ioaddr + EECtrl); | |
1096 | mii_delay(ioaddr); | |
1097 | return (data & MII_Data)? 1 : 0; | |
1098 | } | |
1099 | ||
1100 | static void mii_send_bits (struct net_device *dev, u32 data, int len) | |
1101 | { | |
1102 | u32 i; | |
1103 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1104 | ||
1105 | for (i = (1 << (len-1)); i; i >>= 1) | |
1106 | { | |
1107 | u32 mdio_val = MII_Write | ((data & i)? MII_Data : 0); | |
1108 | writel(mdio_val, ioaddr + EECtrl); | |
1109 | mii_delay(ioaddr); | |
1110 | writel(mdio_val | MII_ShiftClk, ioaddr + EECtrl); | |
1111 | mii_delay(ioaddr); | |
1112 | } | |
1113 | writel(0, ioaddr + EECtrl); | |
1114 | mii_delay(ioaddr); | |
1115 | } | |
1116 | ||
1117 | static int miiport_read(struct net_device *dev, int phy_id, int reg) | |
1118 | { | |
1119 | u32 cmd; | |
1120 | int i; | |
1121 | u32 retval = 0; | |
1122 | ||
1123 | /* Ensure sync */ | |
1124 | mii_send_bits (dev, 0xffffffff, 32); | |
1125 | /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ | |
1126 | /* ST,OP = 0110'b for read operation */ | |
1127 | cmd = (0x06 << 10) | (phy_id << 5) | reg; | |
1128 | mii_send_bits (dev, cmd, 14); | |
1129 | /* Turnaround */ | |
1130 | if (mii_getbit (dev)) | |
1131 | return 0; | |
1132 | /* Read data */ | |
1133 | for (i = 0; i < 16; i++) { | |
1134 | retval <<= 1; | |
1135 | retval |= mii_getbit (dev); | |
1136 | } | |
1137 | /* End cycle */ | |
1138 | mii_getbit (dev); | |
1139 | return retval; | |
1140 | } | |
1141 | ||
1142 | static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data) | |
1143 | { | |
1144 | u32 cmd; | |
1145 | ||
1146 | /* Ensure sync */ | |
1147 | mii_send_bits (dev, 0xffffffff, 32); | |
1148 | /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ | |
1149 | /* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */ | |
1150 | cmd = (0x5002 << 16) | (phy_id << 23) | (reg << 18) | data; | |
1151 | mii_send_bits (dev, cmd, 32); | |
1152 | /* End cycle */ | |
1153 | mii_getbit (dev); | |
1154 | } | |
1155 | ||
1156 | static int mdio_read(struct net_device *dev, int reg) | |
1157 | { | |
1158 | struct netdev_private *np = netdev_priv(dev); | |
1159 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1160 | ||
1161 | /* The 83815 series has two ports: | |
1162 | * - an internal transceiver | |
1163 | * - an external mii bus | |
1164 | */ | |
1165 | if (dev->if_port == PORT_TP) | |
1166 | return readw(ioaddr+BasicControl+(reg<<2)); | |
1167 | else | |
1168 | return miiport_read(dev, np->phy_addr_external, reg); | |
1169 | } | |
1170 | ||
1171 | static void mdio_write(struct net_device *dev, int reg, u16 data) | |
1172 | { | |
1173 | struct netdev_private *np = netdev_priv(dev); | |
1174 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1175 | ||
1176 | /* The 83815 series has an internal transceiver; handle separately */ | |
1177 | if (dev->if_port == PORT_TP) | |
1178 | writew(data, ioaddr+BasicControl+(reg<<2)); | |
1179 | else | |
1180 | miiport_write(dev, np->phy_addr_external, reg, data); | |
1181 | } | |
1182 | ||
1183 | static void init_phy_fixup(struct net_device *dev) | |
1184 | { | |
1185 | struct netdev_private *np = netdev_priv(dev); | |
1186 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1187 | int i; | |
1188 | u32 cfg; | |
1189 | u16 tmp; | |
1190 | ||
1191 | /* restore stuff lost when power was out */ | |
1192 | tmp = mdio_read(dev, MII_BMCR); | |
1193 | if (np->autoneg == AUTONEG_ENABLE) { | |
1194 | /* renegotiate if something changed */ | |
1195 | if ((tmp & BMCR_ANENABLE) == 0 | |
1196 | || np->advertising != mdio_read(dev, MII_ADVERTISE)) | |
1197 | { | |
1198 | /* turn on autonegotiation and force negotiation */ | |
1199 | tmp |= (BMCR_ANENABLE | BMCR_ANRESTART); | |
1200 | mdio_write(dev, MII_ADVERTISE, np->advertising); | |
1201 | } | |
1202 | } else { | |
1203 | /* turn off auto negotiation, set speed and duplexity */ | |
1204 | tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX); | |
1205 | if (np->speed == SPEED_100) | |
1206 | tmp |= BMCR_SPEED100; | |
1207 | if (np->duplex == DUPLEX_FULL) | |
1208 | tmp |= BMCR_FULLDPLX; | |
1209 | /* | |
1210 | * Note: there is no good way to inform the link partner | |
1211 | * that our capabilities changed. The user has to unplug | |
1212 | * and replug the network cable after some changes, e.g. | |
1213 | * after switching from 10HD, autoneg off to 100 HD, | |
1214 | * autoneg off. | |
1215 | */ | |
1216 | } | |
1217 | mdio_write(dev, MII_BMCR, tmp); | |
1218 | readl(ioaddr + ChipConfig); | |
1219 | udelay(1); | |
1220 | ||
1221 | /* find out what phy this is */ | |
1222 | np->mii = (mdio_read(dev, MII_PHYSID1) << 16) | |
1223 | + mdio_read(dev, MII_PHYSID2); | |
1224 | ||
1225 | /* handle external phys here */ | |
1226 | switch (np->mii) { | |
1227 | case PHYID_AM79C874: | |
1228 | /* phy specific configuration for fibre/tp operation */ | |
1229 | tmp = mdio_read(dev, MII_MCTRL); | |
1230 | tmp &= ~(MII_FX_SEL | MII_EN_SCRM); | |
1231 | if (dev->if_port == PORT_FIBRE) | |
1232 | tmp |= MII_FX_SEL; | |
1233 | else | |
1234 | tmp |= MII_EN_SCRM; | |
1235 | mdio_write(dev, MII_MCTRL, tmp); | |
1236 | break; | |
1237 | default: | |
1238 | break; | |
1239 | } | |
1240 | cfg = readl(ioaddr + ChipConfig); | |
1241 | if (cfg & CfgExtPhy) | |
1242 | return; | |
1243 | ||
1244 | /* On page 78 of the spec, they recommend some settings for "optimum | |
1245 | performance" to be done in sequence. These settings optimize some | |
1246 | of the 100Mbit autodetection circuitry. They say we only want to | |
1247 | do this for rev C of the chip, but engineers at NSC (Bradley | |
1248 | Kennedy) recommends always setting them. If you don't, you get | |
1249 | errors on some autonegotiations that make the device unusable. | |
1250 | ||
1251 | It seems that the DSP needs a few usec to reinitialize after | |
1252 | the start of the phy. Just retry writing these values until they | |
1253 | stick. | |
1254 | */ | |
1255 | for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { | |
1256 | ||
1257 | int dspcfg; | |
1258 | writew(1, ioaddr + PGSEL); | |
1259 | writew(PMDCSR_VAL, ioaddr + PMDCSR); | |
1260 | writew(TSTDAT_VAL, ioaddr + TSTDAT); | |
1261 | np->dspcfg = (np->srr <= SRR_DP83815_C)? | |
1262 | DSPCFG_VAL : (DSPCFG_COEF | readw(ioaddr + DSPCFG)); | |
1263 | writew(np->dspcfg, ioaddr + DSPCFG); | |
1264 | writew(SDCFG_VAL, ioaddr + SDCFG); | |
1265 | writew(0, ioaddr + PGSEL); | |
1266 | readl(ioaddr + ChipConfig); | |
1267 | udelay(10); | |
1268 | ||
1269 | writew(1, ioaddr + PGSEL); | |
1270 | dspcfg = readw(ioaddr + DSPCFG); | |
1271 | writew(0, ioaddr + PGSEL); | |
1272 | if (np->dspcfg == dspcfg) | |
1273 | break; | |
1274 | } | |
1275 | ||
1276 | if (netif_msg_link(np)) { | |
1277 | if (i==NATSEMI_HW_TIMEOUT) { | |
1278 | printk(KERN_INFO | |
1279 | "%s: DSPCFG mismatch after retrying for %d usec.\n", | |
1280 | dev->name, i*10); | |
1281 | } else { | |
1282 | printk(KERN_INFO | |
1283 | "%s: DSPCFG accepted after %d usec.\n", | |
1284 | dev->name, i*10); | |
1285 | } | |
1286 | } | |
1287 | /* | |
1288 | * Enable PHY Specific event based interrupts. Link state change | |
1289 | * and Auto-Negotiation Completion are among the affected. | |
1290 | * Read the intr status to clear it (needed for wake events). | |
1291 | */ | |
1292 | readw(ioaddr + MIntrStatus); | |
1293 | writew(MICRIntEn, ioaddr + MIntrCtrl); | |
1294 | } | |
1295 | ||
1296 | static int switch_port_external(struct net_device *dev) | |
1297 | { | |
1298 | struct netdev_private *np = netdev_priv(dev); | |
1299 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1300 | u32 cfg; | |
1301 | ||
1302 | cfg = readl(ioaddr + ChipConfig); | |
1303 | if (cfg & CfgExtPhy) | |
1304 | return 0; | |
1305 | ||
1306 | if (netif_msg_link(np)) { | |
1307 | printk(KERN_INFO "%s: switching to external transceiver.\n", | |
1308 | dev->name); | |
1309 | } | |
1310 | ||
1311 | /* 1) switch back to external phy */ | |
1312 | writel(cfg | (CfgExtPhy | CfgPhyDis), ioaddr + ChipConfig); | |
1313 | readl(ioaddr + ChipConfig); | |
1314 | udelay(1); | |
1315 | ||
1316 | /* 2) reset the external phy: */ | |
1317 | /* resetting the external PHY has been known to cause a hub supplying | |
1318 | * power over Ethernet to kill the power. We don't want to kill | |
1319 | * power to this computer, so we avoid resetting the phy. | |
1320 | */ | |
1321 | ||
1322 | /* 3) reinit the phy fixup, it got lost during power down. */ | |
1323 | move_int_phy(dev, np->phy_addr_external); | |
1324 | init_phy_fixup(dev); | |
1325 | ||
1326 | return 1; | |
1327 | } | |
1328 | ||
1329 | static int switch_port_internal(struct net_device *dev) | |
1330 | { | |
1331 | struct netdev_private *np = netdev_priv(dev); | |
1332 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1333 | int i; | |
1334 | u32 cfg; | |
1335 | u16 bmcr; | |
1336 | ||
1337 | cfg = readl(ioaddr + ChipConfig); | |
1338 | if (!(cfg &CfgExtPhy)) | |
1339 | return 0; | |
1340 | ||
1341 | if (netif_msg_link(np)) { | |
1342 | printk(KERN_INFO "%s: switching to internal transceiver.\n", | |
1343 | dev->name); | |
1344 | } | |
1345 | /* 1) switch back to internal phy: */ | |
1346 | cfg = cfg & ~(CfgExtPhy | CfgPhyDis); | |
1347 | writel(cfg, ioaddr + ChipConfig); | |
1348 | readl(ioaddr + ChipConfig); | |
1349 | udelay(1); | |
1350 | ||
1351 | /* 2) reset the internal phy: */ | |
1352 | bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2)); | |
1353 | writel(bmcr | BMCR_RESET, ioaddr+BasicControl+(MII_BMCR<<2)); | |
1354 | readl(ioaddr + ChipConfig); | |
1355 | udelay(10); | |
1356 | for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { | |
1357 | bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2)); | |
1358 | if (!(bmcr & BMCR_RESET)) | |
1359 | break; | |
1360 | udelay(10); | |
1361 | } | |
1362 | if (i==NATSEMI_HW_TIMEOUT && netif_msg_link(np)) { | |
1363 | printk(KERN_INFO | |
1364 | "%s: phy reset did not complete in %d usec.\n", | |
1365 | dev->name, i*10); | |
1366 | } | |
1367 | /* 3) reinit the phy fixup, it got lost during power down. */ | |
1368 | init_phy_fixup(dev); | |
1369 | ||
1370 | return 1; | |
1371 | } | |
1372 | ||
1373 | /* Scan for a PHY on the external mii bus. | |
1374 | * There are two tricky points: | |
1375 | * - Do not scan while the internal phy is enabled. The internal phy will | |
1376 | * crash: e.g. reads from the DSPCFG register will return odd values and | |
1377 | * the nasty random phy reset code will reset the nic every few seconds. | |
1378 | * - The internal phy must be moved around, an external phy could | |
1379 | * have the same address as the internal phy. | |
1380 | */ | |
1381 | static int find_mii(struct net_device *dev) | |
1382 | { | |
1383 | struct netdev_private *np = netdev_priv(dev); | |
1384 | int tmp; | |
1385 | int i; | |
1386 | int did_switch; | |
1387 | ||
1388 | /* Switch to external phy */ | |
1389 | did_switch = switch_port_external(dev); | |
1390 | ||
1391 | /* Scan the possible phy addresses: | |
1392 | * | |
1393 | * PHY address 0 means that the phy is in isolate mode. Not yet | |
1394 | * supported due to lack of test hardware. User space should | |
1395 | * handle it through ethtool. | |
1396 | */ | |
1397 | for (i = 1; i <= 31; i++) { | |
1398 | move_int_phy(dev, i); | |
1399 | tmp = miiport_read(dev, i, MII_BMSR); | |
1400 | if (tmp != 0xffff && tmp != 0x0000) { | |
1401 | /* found something! */ | |
1402 | np->mii = (mdio_read(dev, MII_PHYSID1) << 16) | |
1403 | + mdio_read(dev, MII_PHYSID2); | |
1404 | if (netif_msg_probe(np)) { | |
1405 | printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n", | |
1406 | pci_name(np->pci_dev), np->mii, i); | |
1407 | } | |
1408 | break; | |
1409 | } | |
1410 | } | |
1411 | /* And switch back to internal phy: */ | |
1412 | if (did_switch) | |
1413 | switch_port_internal(dev); | |
1414 | return i; | |
1415 | } | |
1416 | ||
1417 | /* CFG bits [13:16] [18:23] */ | |
1418 | #define CFG_RESET_SAVE 0xfde000 | |
1419 | /* WCSR bits [0:4] [9:10] */ | |
1420 | #define WCSR_RESET_SAVE 0x61f | |
1421 | /* RFCR bits [20] [22] [27:31] */ | |
1422 | #define RFCR_RESET_SAVE 0xf8500000; | |
1423 | ||
1424 | static void natsemi_reset(struct net_device *dev) | |
1425 | { | |
1426 | int i; | |
1427 | u32 cfg; | |
1428 | u32 wcsr; | |
1429 | u32 rfcr; | |
1430 | u16 pmatch[3]; | |
1431 | u16 sopass[3]; | |
1432 | struct netdev_private *np = netdev_priv(dev); | |
1433 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1434 | ||
1435 | /* | |
1436 | * Resetting the chip causes some registers to be lost. | |
1437 | * Natsemi suggests NOT reloading the EEPROM while live, so instead | |
1438 | * we save the state that would have been loaded from EEPROM | |
1439 | * on a normal power-up (see the spec EEPROM map). This assumes | |
1440 | * whoever calls this will follow up with init_registers() eventually. | |
1441 | */ | |
1442 | ||
1443 | /* CFG */ | |
1444 | cfg = readl(ioaddr + ChipConfig) & CFG_RESET_SAVE; | |
1445 | /* WCSR */ | |
1446 | wcsr = readl(ioaddr + WOLCmd) & WCSR_RESET_SAVE; | |
1447 | /* RFCR */ | |
1448 | rfcr = readl(ioaddr + RxFilterAddr) & RFCR_RESET_SAVE; | |
1449 | /* PMATCH */ | |
1450 | for (i = 0; i < 3; i++) { | |
1451 | writel(i*2, ioaddr + RxFilterAddr); | |
1452 | pmatch[i] = readw(ioaddr + RxFilterData); | |
1453 | } | |
1454 | /* SOPAS */ | |
1455 | for (i = 0; i < 3; i++) { | |
1456 | writel(0xa+(i*2), ioaddr + RxFilterAddr); | |
1457 | sopass[i] = readw(ioaddr + RxFilterData); | |
1458 | } | |
1459 | ||
1460 | /* now whack the chip */ | |
1461 | writel(ChipReset, ioaddr + ChipCmd); | |
1462 | for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { | |
1463 | if (!(readl(ioaddr + ChipCmd) & ChipReset)) | |
1464 | break; | |
1465 | udelay(5); | |
1466 | } | |
1467 | if (i==NATSEMI_HW_TIMEOUT) { | |
1468 | printk(KERN_WARNING "%s: reset did not complete in %d usec.\n", | |
1469 | dev->name, i*5); | |
1470 | } else if (netif_msg_hw(np)) { | |
1471 | printk(KERN_DEBUG "%s: reset completed in %d usec.\n", | |
1472 | dev->name, i*5); | |
1473 | } | |
1474 | ||
1475 | /* restore CFG */ | |
1476 | cfg |= readl(ioaddr + ChipConfig) & ~CFG_RESET_SAVE; | |
1477 | /* turn on external phy if it was selected */ | |
1478 | if (dev->if_port == PORT_TP) | |
1479 | cfg &= ~(CfgExtPhy | CfgPhyDis); | |
1480 | else | |
1481 | cfg |= (CfgExtPhy | CfgPhyDis); | |
1482 | writel(cfg, ioaddr + ChipConfig); | |
1483 | /* restore WCSR */ | |
1484 | wcsr |= readl(ioaddr + WOLCmd) & ~WCSR_RESET_SAVE; | |
1485 | writel(wcsr, ioaddr + WOLCmd); | |
1486 | /* read RFCR */ | |
1487 | rfcr |= readl(ioaddr + RxFilterAddr) & ~RFCR_RESET_SAVE; | |
1488 | /* restore PMATCH */ | |
1489 | for (i = 0; i < 3; i++) { | |
1490 | writel(i*2, ioaddr + RxFilterAddr); | |
1491 | writew(pmatch[i], ioaddr + RxFilterData); | |
1492 | } | |
1493 | for (i = 0; i < 3; i++) { | |
1494 | writel(0xa+(i*2), ioaddr + RxFilterAddr); | |
1495 | writew(sopass[i], ioaddr + RxFilterData); | |
1496 | } | |
1497 | /* restore RFCR */ | |
1498 | writel(rfcr, ioaddr + RxFilterAddr); | |
1499 | } | |
1500 | ||
e72fd96e MB |
1501 | static void reset_rx(struct net_device *dev) |
1502 | { | |
1503 | int i; | |
1504 | struct netdev_private *np = netdev_priv(dev); | |
1505 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1506 | ||
1507 | np->intr_status &= ~RxResetDone; | |
1508 | ||
1509 | writel(RxReset, ioaddr + ChipCmd); | |
1510 | ||
1511 | for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { | |
1512 | np->intr_status |= readl(ioaddr + IntrStatus); | |
1513 | if (np->intr_status & RxResetDone) | |
1514 | break; | |
1515 | udelay(15); | |
1516 | } | |
1517 | if (i==NATSEMI_HW_TIMEOUT) { | |
1518 | printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n", | |
1519 | dev->name, i*15); | |
1520 | } else if (netif_msg_hw(np)) { | |
1521 | printk(KERN_WARNING "%s: RX reset took %d usec.\n", | |
1522 | dev->name, i*15); | |
1523 | } | |
1524 | } | |
1525 | ||
1da177e4 LT |
1526 | static void natsemi_reload_eeprom(struct net_device *dev) |
1527 | { | |
1528 | struct netdev_private *np = netdev_priv(dev); | |
1529 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1530 | int i; | |
1531 | ||
1532 | writel(EepromReload, ioaddr + PCIBusCfg); | |
1533 | for (i=0;i<NATSEMI_HW_TIMEOUT;i++) { | |
1534 | udelay(50); | |
1535 | if (!(readl(ioaddr + PCIBusCfg) & EepromReload)) | |
1536 | break; | |
1537 | } | |
1538 | if (i==NATSEMI_HW_TIMEOUT) { | |
1539 | printk(KERN_WARNING "natsemi %s: EEPROM did not reload in %d usec.\n", | |
1540 | pci_name(np->pci_dev), i*50); | |
1541 | } else if (netif_msg_hw(np)) { | |
1542 | printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n", | |
1543 | pci_name(np->pci_dev), i*50); | |
1544 | } | |
1545 | } | |
1546 | ||
1547 | static void natsemi_stop_rxtx(struct net_device *dev) | |
1548 | { | |
1549 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1550 | struct netdev_private *np = netdev_priv(dev); | |
1551 | int i; | |
1552 | ||
1553 | writel(RxOff | TxOff, ioaddr + ChipCmd); | |
1554 | for(i=0;i< NATSEMI_HW_TIMEOUT;i++) { | |
1555 | if ((readl(ioaddr + ChipCmd) & (TxOn|RxOn)) == 0) | |
1556 | break; | |
1557 | udelay(5); | |
1558 | } | |
1559 | if (i==NATSEMI_HW_TIMEOUT) { | |
1560 | printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n", | |
1561 | dev->name, i*5); | |
1562 | } else if (netif_msg_hw(np)) { | |
1563 | printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n", | |
1564 | dev->name, i*5); | |
1565 | } | |
1566 | } | |
1567 | ||
1568 | static int netdev_open(struct net_device *dev) | |
1569 | { | |
1570 | struct netdev_private *np = netdev_priv(dev); | |
1571 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1572 | int i; | |
1573 | ||
1574 | /* Reset the chip, just in case. */ | |
1575 | natsemi_reset(dev); | |
1576 | ||
1fb9df5d | 1577 | i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev); |
1da177e4 LT |
1578 | if (i) return i; |
1579 | ||
1580 | if (netif_msg_ifup(np)) | |
1581 | printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", | |
1582 | dev->name, dev->irq); | |
1583 | i = alloc_ring(dev); | |
1584 | if (i < 0) { | |
1585 | free_irq(dev->irq, dev); | |
1586 | return i; | |
1587 | } | |
1588 | init_ring(dev); | |
1589 | spin_lock_irq(&np->lock); | |
1590 | init_registers(dev); | |
1591 | /* now set the MAC address according to dev->dev_addr */ | |
1592 | for (i = 0; i < 3; i++) { | |
1593 | u16 mac = (dev->dev_addr[2*i+1]<<8) + dev->dev_addr[2*i]; | |
1594 | ||
1595 | writel(i*2, ioaddr + RxFilterAddr); | |
1596 | writew(mac, ioaddr + RxFilterData); | |
1597 | } | |
1598 | writel(np->cur_rx_mode, ioaddr + RxFilterAddr); | |
1599 | spin_unlock_irq(&np->lock); | |
1600 | ||
1601 | netif_start_queue(dev); | |
1602 | ||
1603 | if (netif_msg_ifup(np)) | |
1604 | printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n", | |
1605 | dev->name, (int)readl(ioaddr + ChipCmd)); | |
1606 | ||
1607 | /* Set the timer to check for link beat. */ | |
1608 | init_timer(&np->timer); | |
1609 | np->timer.expires = jiffies + NATSEMI_TIMER_FREQ; | |
1610 | np->timer.data = (unsigned long)dev; | |
1611 | np->timer.function = &netdev_timer; /* timer handler */ | |
1612 | add_timer(&np->timer); | |
1613 | ||
1614 | return 0; | |
1615 | } | |
1616 | ||
1617 | static void do_cable_magic(struct net_device *dev) | |
1618 | { | |
1619 | struct netdev_private *np = netdev_priv(dev); | |
1620 | void __iomem *ioaddr = ns_ioaddr(dev); | |
1621 | ||
1622 | if (dev->if_port != PORT_TP) | |
1623 | return; | |
1624 | ||
1625 | if (np->srr >= SRR_DP83816_A5) | |
1626 | return; | |
1627 | ||
1628 | /* | |
1629 | * 100 MBit links with short cables can trip an issue with the chip. | |
1630 | * The problem manifests as lots of CRC errors and/or flickering | |
1631 | * activity LED while idle. This process is based on instructions | |
1632 | * from engineers at National. | |
1633 | */ | |
1634 | if (readl(ioaddr + ChipConfig) & CfgSpeed100) { | |
1635 | u16 data; | |
1636 | ||
1637 | writew(1, ioaddr + PGSEL); | |
1638 | /* | |
1639 | * coefficient visibility should already be enabled via | |
1640 | * DSPCFG | 0x1000 | |
1641 | */ | |
1642 | data = readw(ioaddr + TSTDAT) & 0xff; | |
1643 | /* | |
1644 | * the value must be negative, and within certain values | |
1645 | * (these values all come from National) | |
1646 | */ | |
1647 | if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) { | |
1648 | struct netdev_private *np = netdev_priv(dev); | |
1649 | ||
1650 | /* the bug has been triggered - fix the coefficient */ | |
1651 | writew(TSTDAT_FIXED, ioaddr + TSTDAT); | |
1652 | /* lock the value */ | |
1653 | data = readw(ioaddr + DSPCFG); | |
1654 | np->dspcfg = data | DSPCFG_LOCK; | |
1655 | writew(np->dspcfg, ioaddr + DSPCFG); | |
1656 | } | |
1657 | writew(0, ioaddr + PGSEL); | |
1658 | } | |
1659 | } | |
1660 | ||
1661 | static void undo_cable_magic(struct net_device *dev) | |
1662 | { | |
1663 | u16 data; | |
1664 | struct netdev_private *np = netdev_priv(dev); | |
1665 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1666 | ||
1667 | if (dev->if_port != PORT_TP) | |
1668 | return; | |
1669 | ||
1670 | if (np->srr >= SRR_DP83816_A5) | |
1671 | return; | |
1672 | ||
1673 | writew(1, ioaddr + PGSEL); | |
1674 | /* make sure the lock bit is clear */ | |
1675 | data = readw(ioaddr + DSPCFG); | |
1676 | np->dspcfg = data & ~DSPCFG_LOCK; | |
1677 | writew(np->dspcfg, ioaddr + DSPCFG); | |
1678 | writew(0, ioaddr + PGSEL); | |
1679 | } | |
1680 | ||
1681 | static void check_link(struct net_device *dev) | |
1682 | { | |
1683 | struct netdev_private *np = netdev_priv(dev); | |
1684 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1685 | int duplex; | |
1686 | u16 bmsr; | |
1687 | ||
1688 | /* The link status field is latched: it remains low after a temporary | |
1689 | * link failure until it's read. We need the current link status, | |
1690 | * thus read twice. | |
1691 | */ | |
1692 | mdio_read(dev, MII_BMSR); | |
1693 | bmsr = mdio_read(dev, MII_BMSR); | |
1694 | ||
1695 | if (!(bmsr & BMSR_LSTATUS)) { | |
1696 | if (netif_carrier_ok(dev)) { | |
1697 | if (netif_msg_link(np)) | |
1698 | printk(KERN_NOTICE "%s: link down.\n", | |
1699 | dev->name); | |
1700 | netif_carrier_off(dev); | |
1701 | undo_cable_magic(dev); | |
1702 | } | |
1703 | return; | |
1704 | } | |
1705 | if (!netif_carrier_ok(dev)) { | |
1706 | if (netif_msg_link(np)) | |
1707 | printk(KERN_NOTICE "%s: link up.\n", dev->name); | |
1708 | netif_carrier_on(dev); | |
1709 | do_cable_magic(dev); | |
1710 | } | |
1711 | ||
1712 | duplex = np->full_duplex; | |
1713 | if (!duplex) { | |
1714 | if (bmsr & BMSR_ANEGCOMPLETE) { | |
1715 | int tmp = mii_nway_result( | |
1716 | np->advertising & mdio_read(dev, MII_LPA)); | |
1717 | if (tmp == LPA_100FULL || tmp == LPA_10FULL) | |
1718 | duplex = 1; | |
1719 | } else if (mdio_read(dev, MII_BMCR) & BMCR_FULLDPLX) | |
1720 | duplex = 1; | |
1721 | } | |
1722 | ||
1723 | /* if duplex is set then bit 28 must be set, too */ | |
1724 | if (duplex ^ !!(np->rx_config & RxAcceptTx)) { | |
1725 | if (netif_msg_link(np)) | |
1726 | printk(KERN_INFO | |
1727 | "%s: Setting %s-duplex based on negotiated " | |
1728 | "link capability.\n", dev->name, | |
1729 | duplex ? "full" : "half"); | |
1730 | if (duplex) { | |
1731 | np->rx_config |= RxAcceptTx; | |
1732 | np->tx_config |= TxCarrierIgn | TxHeartIgn; | |
1733 | } else { | |
1734 | np->rx_config &= ~RxAcceptTx; | |
1735 | np->tx_config &= ~(TxCarrierIgn | TxHeartIgn); | |
1736 | } | |
1737 | writel(np->tx_config, ioaddr + TxConfig); | |
1738 | writel(np->rx_config, ioaddr + RxConfig); | |
1739 | } | |
1740 | } | |
1741 | ||
1742 | static void init_registers(struct net_device *dev) | |
1743 | { | |
1744 | struct netdev_private *np = netdev_priv(dev); | |
1745 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1746 | ||
1747 | init_phy_fixup(dev); | |
1748 | ||
1749 | /* clear any interrupts that are pending, such as wake events */ | |
1750 | readl(ioaddr + IntrStatus); | |
1751 | ||
1752 | writel(np->ring_dma, ioaddr + RxRingPtr); | |
1753 | writel(np->ring_dma + RX_RING_SIZE * sizeof(struct netdev_desc), | |
1754 | ioaddr + TxRingPtr); | |
1755 | ||
1756 | /* Initialize other registers. | |
1757 | * Configure the PCI bus bursts and FIFO thresholds. | |
1758 | * Configure for standard, in-spec Ethernet. | |
1759 | * Start with half-duplex. check_link will update | |
1760 | * to the correct settings. | |
1761 | */ | |
1762 | ||
1763 | /* DRTH: 2: start tx if 64 bytes are in the fifo | |
1764 | * FLTH: 0x10: refill with next packet if 512 bytes are free | |
1765 | * MXDMA: 0: up to 256 byte bursts. | |
1766 | * MXDMA must be <= FLTH | |
1767 | * ECRETRY=1 | |
1768 | * ATP=1 | |
1769 | */ | |
1770 | np->tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | | |
1771 | TX_FLTH_VAL | TX_DRTH_VAL_START; | |
1772 | writel(np->tx_config, ioaddr + TxConfig); | |
1773 | ||
1774 | /* DRTH 0x10: start copying to memory if 128 bytes are in the fifo | |
1775 | * MXDMA 0: up to 256 byte bursts | |
1776 | */ | |
1777 | np->rx_config = RxMxdma_256 | RX_DRTH_VAL; | |
1778 | /* if receive ring now has bigger buffers than normal, enable jumbo */ | |
1779 | if (np->rx_buf_sz > NATSEMI_LONGPKT) | |
1780 | np->rx_config |= RxAcceptLong; | |
1781 | ||
1782 | writel(np->rx_config, ioaddr + RxConfig); | |
1783 | ||
1784 | /* Disable PME: | |
1785 | * The PME bit is initialized from the EEPROM contents. | |
1786 | * PCI cards probably have PME disabled, but motherboard | |
1787 | * implementations may have PME set to enable WakeOnLan. | |
1788 | * With PME set the chip will scan incoming packets but | |
1789 | * nothing will be written to memory. */ | |
1790 | np->SavedClkRun = readl(ioaddr + ClkRun); | |
1791 | writel(np->SavedClkRun & ~PMEEnable, ioaddr + ClkRun); | |
1792 | if (np->SavedClkRun & PMEStatus && netif_msg_wol(np)) { | |
1793 | printk(KERN_NOTICE "%s: Wake-up event %#08x\n", | |
1794 | dev->name, readl(ioaddr + WOLCmd)); | |
1795 | } | |
1796 | ||
1797 | check_link(dev); | |
1798 | __set_rx_mode(dev); | |
1799 | ||
1800 | /* Enable interrupts by setting the interrupt mask. */ | |
1801 | writel(DEFAULT_INTR, ioaddr + IntrMask); | |
1802 | writel(1, ioaddr + IntrEnable); | |
1803 | ||
1804 | writel(RxOn | TxOn, ioaddr + ChipCmd); | |
1805 | writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */ | |
1806 | } | |
1807 | ||
1808 | /* | |
1809 | * netdev_timer: | |
1810 | * Purpose: | |
1811 | * 1) check for link changes. Usually they are handled by the MII interrupt | |
1812 | * but it doesn't hurt to check twice. | |
1813 | * 2) check for sudden death of the NIC: | |
1814 | * It seems that a reference set for this chip went out with incorrect info, | |
1815 | * and there exist boards that aren't quite right. An unexpected voltage | |
1816 | * drop can cause the PHY to get itself in a weird state (basically reset). | |
1817 | * NOTE: this only seems to affect revC chips. | |
1818 | * 3) check of death of the RX path due to OOM | |
1819 | */ | |
1820 | static void netdev_timer(unsigned long data) | |
1821 | { | |
1822 | struct net_device *dev = (struct net_device *)data; | |
1823 | struct netdev_private *np = netdev_priv(dev); | |
1824 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1825 | int next_tick = 5*HZ; | |
1826 | ||
1827 | if (netif_msg_timer(np)) { | |
1828 | /* DO NOT read the IntrStatus register, | |
1829 | * a read clears any pending interrupts. | |
1830 | */ | |
1831 | printk(KERN_DEBUG "%s: Media selection timer tick.\n", | |
1832 | dev->name); | |
1833 | } | |
1834 | ||
1835 | if (dev->if_port == PORT_TP) { | |
1836 | u16 dspcfg; | |
1837 | ||
1838 | spin_lock_irq(&np->lock); | |
1839 | /* check for a nasty random phy-reset - use dspcfg as a flag */ | |
1840 | writew(1, ioaddr+PGSEL); | |
1841 | dspcfg = readw(ioaddr+DSPCFG); | |
1842 | writew(0, ioaddr+PGSEL); | |
1843 | if (dspcfg != np->dspcfg) { | |
1844 | if (!netif_queue_stopped(dev)) { | |
1845 | spin_unlock_irq(&np->lock); | |
1846 | if (netif_msg_hw(np)) | |
1847 | printk(KERN_NOTICE "%s: possible phy reset: " | |
1848 | "re-initializing\n", dev->name); | |
1849 | disable_irq(dev->irq); | |
1850 | spin_lock_irq(&np->lock); | |
1851 | natsemi_stop_rxtx(dev); | |
1852 | dump_ring(dev); | |
1853 | reinit_ring(dev); | |
1854 | init_registers(dev); | |
1855 | spin_unlock_irq(&np->lock); | |
1856 | enable_irq(dev->irq); | |
1857 | } else { | |
1858 | /* hurry back */ | |
1859 | next_tick = HZ; | |
1860 | spin_unlock_irq(&np->lock); | |
1861 | } | |
1862 | } else { | |
1863 | /* init_registers() calls check_link() for the above case */ | |
1864 | check_link(dev); | |
1865 | spin_unlock_irq(&np->lock); | |
1866 | } | |
1867 | } else { | |
1868 | spin_lock_irq(&np->lock); | |
1869 | check_link(dev); | |
1870 | spin_unlock_irq(&np->lock); | |
1871 | } | |
1872 | if (np->oom) { | |
1873 | disable_irq(dev->irq); | |
1874 | np->oom = 0; | |
1875 | refill_rx(dev); | |
1876 | enable_irq(dev->irq); | |
1877 | if (!np->oom) { | |
1878 | writel(RxOn, ioaddr + ChipCmd); | |
1879 | } else { | |
1880 | next_tick = 1; | |
1881 | } | |
1882 | } | |
1883 | mod_timer(&np->timer, jiffies + next_tick); | |
1884 | } | |
1885 | ||
1886 | static void dump_ring(struct net_device *dev) | |
1887 | { | |
1888 | struct netdev_private *np = netdev_priv(dev); | |
1889 | ||
1890 | if (netif_msg_pktdata(np)) { | |
1891 | int i; | |
1892 | printk(KERN_DEBUG " Tx ring at %p:\n", np->tx_ring); | |
1893 | for (i = 0; i < TX_RING_SIZE; i++) { | |
1894 | printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", | |
1895 | i, np->tx_ring[i].next_desc, | |
1896 | np->tx_ring[i].cmd_status, | |
1897 | np->tx_ring[i].addr); | |
1898 | } | |
1899 | printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); | |
1900 | for (i = 0; i < RX_RING_SIZE; i++) { | |
1901 | printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", | |
1902 | i, np->rx_ring[i].next_desc, | |
1903 | np->rx_ring[i].cmd_status, | |
1904 | np->rx_ring[i].addr); | |
1905 | } | |
1906 | } | |
1907 | } | |
1908 | ||
1909 | static void tx_timeout(struct net_device *dev) | |
1910 | { | |
1911 | struct netdev_private *np = netdev_priv(dev); | |
1912 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1913 | ||
1914 | disable_irq(dev->irq); | |
1915 | spin_lock_irq(&np->lock); | |
1916 | if (!np->hands_off) { | |
1917 | if (netif_msg_tx_err(np)) | |
1918 | printk(KERN_WARNING | |
1919 | "%s: Transmit timed out, status %#08x," | |
1920 | " resetting...\n", | |
1921 | dev->name, readl(ioaddr + IntrStatus)); | |
1922 | dump_ring(dev); | |
1923 | ||
1924 | natsemi_reset(dev); | |
1925 | reinit_ring(dev); | |
1926 | init_registers(dev); | |
1927 | } else { | |
1928 | printk(KERN_WARNING | |
1929 | "%s: tx_timeout while in hands_off state?\n", | |
1930 | dev->name); | |
1931 | } | |
1932 | spin_unlock_irq(&np->lock); | |
1933 | enable_irq(dev->irq); | |
1934 | ||
1935 | dev->trans_start = jiffies; | |
1936 | np->stats.tx_errors++; | |
1937 | netif_wake_queue(dev); | |
1938 | } | |
1939 | ||
1940 | static int alloc_ring(struct net_device *dev) | |
1941 | { | |
1942 | struct netdev_private *np = netdev_priv(dev); | |
1943 | np->rx_ring = pci_alloc_consistent(np->pci_dev, | |
1944 | sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE), | |
1945 | &np->ring_dma); | |
1946 | if (!np->rx_ring) | |
1947 | return -ENOMEM; | |
1948 | np->tx_ring = &np->rx_ring[RX_RING_SIZE]; | |
1949 | return 0; | |
1950 | } | |
1951 | ||
1952 | static void refill_rx(struct net_device *dev) | |
1953 | { | |
1954 | struct netdev_private *np = netdev_priv(dev); | |
1955 | ||
1956 | /* Refill the Rx ring buffers. */ | |
1957 | for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { | |
1958 | struct sk_buff *skb; | |
1959 | int entry = np->dirty_rx % RX_RING_SIZE; | |
1960 | if (np->rx_skbuff[entry] == NULL) { | |
1961 | unsigned int buflen = np->rx_buf_sz+NATSEMI_PADDING; | |
1962 | skb = dev_alloc_skb(buflen); | |
1963 | np->rx_skbuff[entry] = skb; | |
1964 | if (skb == NULL) | |
1965 | break; /* Better luck next round. */ | |
1966 | skb->dev = dev; /* Mark as being used by this device. */ | |
1967 | np->rx_dma[entry] = pci_map_single(np->pci_dev, | |
689be439 | 1968 | skb->data, buflen, PCI_DMA_FROMDEVICE); |
1da177e4 LT |
1969 | np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]); |
1970 | } | |
1971 | np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz); | |
1972 | } | |
1973 | if (np->cur_rx - np->dirty_rx == RX_RING_SIZE) { | |
1974 | if (netif_msg_rx_err(np)) | |
1975 | printk(KERN_WARNING "%s: going OOM.\n", dev->name); | |
1976 | np->oom = 1; | |
1977 | } | |
1978 | } | |
1979 | ||
1980 | static void set_bufsize(struct net_device *dev) | |
1981 | { | |
1982 | struct netdev_private *np = netdev_priv(dev); | |
1983 | if (dev->mtu <= ETH_DATA_LEN) | |
1984 | np->rx_buf_sz = ETH_DATA_LEN + NATSEMI_HEADERS; | |
1985 | else | |
1986 | np->rx_buf_sz = dev->mtu + NATSEMI_HEADERS; | |
1987 | } | |
1988 | ||
1989 | /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ | |
1990 | static void init_ring(struct net_device *dev) | |
1991 | { | |
1992 | struct netdev_private *np = netdev_priv(dev); | |
1993 | int i; | |
1994 | ||
1995 | /* 1) TX ring */ | |
1996 | np->dirty_tx = np->cur_tx = 0; | |
1997 | for (i = 0; i < TX_RING_SIZE; i++) { | |
1998 | np->tx_skbuff[i] = NULL; | |
1999 | np->tx_ring[i].next_desc = cpu_to_le32(np->ring_dma | |
2000 | +sizeof(struct netdev_desc) | |
2001 | *((i+1)%TX_RING_SIZE+RX_RING_SIZE)); | |
2002 | np->tx_ring[i].cmd_status = 0; | |
2003 | } | |
2004 | ||
2005 | /* 2) RX ring */ | |
2006 | np->dirty_rx = 0; | |
2007 | np->cur_rx = RX_RING_SIZE; | |
2008 | np->oom = 0; | |
2009 | set_bufsize(dev); | |
2010 | ||
2011 | np->rx_head_desc = &np->rx_ring[0]; | |
2012 | ||
2013 | /* Please be carefull before changing this loop - at least gcc-2.95.1 | |
2014 | * miscompiles it otherwise. | |
2015 | */ | |
2016 | /* Initialize all Rx descriptors. */ | |
2017 | for (i = 0; i < RX_RING_SIZE; i++) { | |
2018 | np->rx_ring[i].next_desc = cpu_to_le32(np->ring_dma | |
2019 | +sizeof(struct netdev_desc) | |
2020 | *((i+1)%RX_RING_SIZE)); | |
2021 | np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn); | |
2022 | np->rx_skbuff[i] = NULL; | |
2023 | } | |
2024 | refill_rx(dev); | |
2025 | dump_ring(dev); | |
2026 | } | |
2027 | ||
2028 | static void drain_tx(struct net_device *dev) | |
2029 | { | |
2030 | struct netdev_private *np = netdev_priv(dev); | |
2031 | int i; | |
2032 | ||
2033 | for (i = 0; i < TX_RING_SIZE; i++) { | |
2034 | if (np->tx_skbuff[i]) { | |
2035 | pci_unmap_single(np->pci_dev, | |
2036 | np->tx_dma[i], np->tx_skbuff[i]->len, | |
2037 | PCI_DMA_TODEVICE); | |
2038 | dev_kfree_skb(np->tx_skbuff[i]); | |
2039 | np->stats.tx_dropped++; | |
2040 | } | |
2041 | np->tx_skbuff[i] = NULL; | |
2042 | } | |
2043 | } | |
2044 | ||
2045 | static void drain_rx(struct net_device *dev) | |
2046 | { | |
2047 | struct netdev_private *np = netdev_priv(dev); | |
2048 | unsigned int buflen = np->rx_buf_sz; | |
2049 | int i; | |
2050 | ||
2051 | /* Free all the skbuffs in the Rx queue. */ | |
2052 | for (i = 0; i < RX_RING_SIZE; i++) { | |
2053 | np->rx_ring[i].cmd_status = 0; | |
2054 | np->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */ | |
2055 | if (np->rx_skbuff[i]) { | |
2056 | pci_unmap_single(np->pci_dev, | |
2057 | np->rx_dma[i], buflen, | |
2058 | PCI_DMA_FROMDEVICE); | |
2059 | dev_kfree_skb(np->rx_skbuff[i]); | |
2060 | } | |
2061 | np->rx_skbuff[i] = NULL; | |
2062 | } | |
2063 | } | |
2064 | ||
2065 | static void drain_ring(struct net_device *dev) | |
2066 | { | |
2067 | drain_rx(dev); | |
2068 | drain_tx(dev); | |
2069 | } | |
2070 | ||
2071 | static void free_ring(struct net_device *dev) | |
2072 | { | |
2073 | struct netdev_private *np = netdev_priv(dev); | |
2074 | pci_free_consistent(np->pci_dev, | |
2075 | sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE), | |
2076 | np->rx_ring, np->ring_dma); | |
2077 | } | |
2078 | ||
2079 | static void reinit_rx(struct net_device *dev) | |
2080 | { | |
2081 | struct netdev_private *np = netdev_priv(dev); | |
2082 | int i; | |
2083 | ||
2084 | /* RX Ring */ | |
2085 | np->dirty_rx = 0; | |
2086 | np->cur_rx = RX_RING_SIZE; | |
2087 | np->rx_head_desc = &np->rx_ring[0]; | |
2088 | /* Initialize all Rx descriptors. */ | |
2089 | for (i = 0; i < RX_RING_SIZE; i++) | |
2090 | np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn); | |
2091 | ||
2092 | refill_rx(dev); | |
2093 | } | |
2094 | ||
2095 | static void reinit_ring(struct net_device *dev) | |
2096 | { | |
2097 | struct netdev_private *np = netdev_priv(dev); | |
2098 | int i; | |
2099 | ||
2100 | /* drain TX ring */ | |
2101 | drain_tx(dev); | |
2102 | np->dirty_tx = np->cur_tx = 0; | |
2103 | for (i=0;i<TX_RING_SIZE;i++) | |
2104 | np->tx_ring[i].cmd_status = 0; | |
2105 | ||
2106 | reinit_rx(dev); | |
2107 | } | |
2108 | ||
2109 | static int start_tx(struct sk_buff *skb, struct net_device *dev) | |
2110 | { | |
2111 | struct netdev_private *np = netdev_priv(dev); | |
2112 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2113 | unsigned entry; | |
2114 | ||
2115 | /* Note: Ordering is important here, set the field with the | |
2116 | "ownership" bit last, and only then increment cur_tx. */ | |
2117 | ||
2118 | /* Calculate the next Tx descriptor entry. */ | |
2119 | entry = np->cur_tx % TX_RING_SIZE; | |
2120 | ||
2121 | np->tx_skbuff[entry] = skb; | |
2122 | np->tx_dma[entry] = pci_map_single(np->pci_dev, | |
2123 | skb->data,skb->len, PCI_DMA_TODEVICE); | |
2124 | ||
2125 | np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]); | |
2126 | ||
2127 | spin_lock_irq(&np->lock); | |
2128 | ||
2129 | if (!np->hands_off) { | |
2130 | np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len); | |
2131 | /* StrongARM: Explicitly cache flush np->tx_ring and | |
2132 | * skb->data,skb->len. */ | |
2133 | wmb(); | |
2134 | np->cur_tx++; | |
2135 | if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) { | |
2136 | netdev_tx_done(dev); | |
2137 | if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) | |
2138 | netif_stop_queue(dev); | |
2139 | } | |
2140 | /* Wake the potentially-idle transmit channel. */ | |
2141 | writel(TxOn, ioaddr + ChipCmd); | |
2142 | } else { | |
2143 | dev_kfree_skb_irq(skb); | |
2144 | np->stats.tx_dropped++; | |
2145 | } | |
2146 | spin_unlock_irq(&np->lock); | |
2147 | ||
2148 | dev->trans_start = jiffies; | |
2149 | ||
2150 | if (netif_msg_tx_queued(np)) { | |
2151 | printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", | |
2152 | dev->name, np->cur_tx, entry); | |
2153 | } | |
2154 | return 0; | |
2155 | } | |
2156 | ||
2157 | static void netdev_tx_done(struct net_device *dev) | |
2158 | { | |
2159 | struct netdev_private *np = netdev_priv(dev); | |
2160 | ||
2161 | for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { | |
2162 | int entry = np->dirty_tx % TX_RING_SIZE; | |
2163 | if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescOwn)) | |
2164 | break; | |
2165 | if (netif_msg_tx_done(np)) | |
2166 | printk(KERN_DEBUG | |
2167 | "%s: tx frame #%d finished, status %#08x.\n", | |
2168 | dev->name, np->dirty_tx, | |
2169 | le32_to_cpu(np->tx_ring[entry].cmd_status)); | |
2170 | if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescPktOK)) { | |
2171 | np->stats.tx_packets++; | |
2172 | np->stats.tx_bytes += np->tx_skbuff[entry]->len; | |
2173 | } else { /* Various Tx errors */ | |
2174 | int tx_status = | |
2175 | le32_to_cpu(np->tx_ring[entry].cmd_status); | |
2176 | if (tx_status & (DescTxAbort|DescTxExcColl)) | |
2177 | np->stats.tx_aborted_errors++; | |
2178 | if (tx_status & DescTxFIFO) | |
2179 | np->stats.tx_fifo_errors++; | |
2180 | if (tx_status & DescTxCarrier) | |
2181 | np->stats.tx_carrier_errors++; | |
2182 | if (tx_status & DescTxOOWCol) | |
2183 | np->stats.tx_window_errors++; | |
2184 | np->stats.tx_errors++; | |
2185 | } | |
2186 | pci_unmap_single(np->pci_dev,np->tx_dma[entry], | |
2187 | np->tx_skbuff[entry]->len, | |
2188 | PCI_DMA_TODEVICE); | |
2189 | /* Free the original skb. */ | |
2190 | dev_kfree_skb_irq(np->tx_skbuff[entry]); | |
2191 | np->tx_skbuff[entry] = NULL; | |
2192 | } | |
2193 | if (netif_queue_stopped(dev) | |
2194 | && np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { | |
2195 | /* The ring is no longer full, wake queue. */ | |
2196 | netif_wake_queue(dev); | |
2197 | } | |
2198 | } | |
2199 | ||
b27a16b7 MB |
2200 | /* The interrupt handler doesn't actually handle interrupts itself, it |
2201 | * schedules a NAPI poll if there is anything to do. */ | |
1da177e4 LT |
2202 | static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs) |
2203 | { | |
2204 | struct net_device *dev = dev_instance; | |
2205 | struct netdev_private *np = netdev_priv(dev); | |
2206 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1da177e4 LT |
2207 | |
2208 | if (np->hands_off) | |
2209 | return IRQ_NONE; | |
b27a16b7 MB |
2210 | |
2211 | /* Reading automatically acknowledges. */ | |
2212 | np->intr_status = readl(ioaddr + IntrStatus); | |
1da177e4 | 2213 | |
b27a16b7 MB |
2214 | if (netif_msg_intr(np)) |
2215 | printk(KERN_DEBUG | |
2216 | "%s: Interrupt, status %#08x, mask %#08x.\n", | |
2217 | dev->name, np->intr_status, | |
2218 | readl(ioaddr + IntrMask)); | |
1da177e4 | 2219 | |
b27a16b7 MB |
2220 | if (!np->intr_status) |
2221 | return IRQ_NONE; | |
1da177e4 | 2222 | |
b27a16b7 MB |
2223 | prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]); |
2224 | ||
2225 | if (netif_rx_schedule_prep(dev)) { | |
2226 | /* Disable interrupts and register for poll */ | |
2227 | natsemi_irq_disable(dev); | |
2228 | __netif_rx_schedule(dev); | |
2229 | } | |
2230 | return IRQ_HANDLED; | |
2231 | } | |
2232 | ||
2233 | /* This is the NAPI poll routine. As well as the standard RX handling | |
2234 | * it also handles all other interrupts that the chip might raise. | |
2235 | */ | |
2236 | static int natsemi_poll(struct net_device *dev, int *budget) | |
2237 | { | |
2238 | struct netdev_private *np = netdev_priv(dev); | |
2239 | void __iomem * ioaddr = ns_ioaddr(dev); | |
1da177e4 | 2240 | |
b27a16b7 MB |
2241 | int work_to_do = min(*budget, dev->quota); |
2242 | int work_done = 0; | |
2243 | ||
2244 | do { | |
2245 | if (np->intr_status & | |
2246 | (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) { | |
1da177e4 LT |
2247 | spin_lock(&np->lock); |
2248 | netdev_tx_done(dev); | |
2249 | spin_unlock(&np->lock); | |
2250 | } | |
2251 | ||
2252 | /* Abnormal error summary/uncommon events handlers. */ | |
b27a16b7 MB |
2253 | if (np->intr_status & IntrAbnormalSummary) |
2254 | netdev_error(dev, np->intr_status); | |
2255 | ||
2256 | if (np->intr_status & | |
2257 | (IntrRxDone | IntrRxIntr | RxStatusFIFOOver | | |
2258 | IntrRxErr | IntrRxOverrun)) { | |
2259 | netdev_rx(dev, &work_done, work_to_do); | |
1da177e4 | 2260 | } |
b27a16b7 MB |
2261 | |
2262 | *budget -= work_done; | |
2263 | dev->quota -= work_done; | |
1da177e4 | 2264 | |
b27a16b7 MB |
2265 | if (work_done >= work_to_do) |
2266 | return 1; | |
2267 | ||
2268 | np->intr_status = readl(ioaddr + IntrStatus); | |
2269 | } while (np->intr_status); | |
1da177e4 | 2270 | |
b27a16b7 MB |
2271 | netif_rx_complete(dev); |
2272 | ||
2273 | /* Reenable interrupts providing nothing is trying to shut | |
2274 | * the chip down. */ | |
2275 | spin_lock(&np->lock); | |
2276 | if (!np->hands_off && netif_running(dev)) | |
2277 | natsemi_irq_enable(dev); | |
2278 | spin_unlock(&np->lock); | |
2279 | ||
2280 | return 0; | |
1da177e4 LT |
2281 | } |
2282 | ||
2283 | /* This routine is logically part of the interrupt handler, but separated | |
2284 | for clarity and better register allocation. */ | |
b27a16b7 | 2285 | static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do) |
1da177e4 LT |
2286 | { |
2287 | struct netdev_private *np = netdev_priv(dev); | |
2288 | int entry = np->cur_rx % RX_RING_SIZE; | |
2289 | int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx; | |
2290 | s32 desc_status = le32_to_cpu(np->rx_head_desc->cmd_status); | |
2291 | unsigned int buflen = np->rx_buf_sz; | |
2292 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2293 | ||
2294 | /* If the driver owns the next entry it's a new packet. Send it up. */ | |
2295 | while (desc_status < 0) { /* e.g. & DescOwn */ | |
2296 | int pkt_len; | |
2297 | if (netif_msg_rx_status(np)) | |
2298 | printk(KERN_DEBUG | |
2299 | " netdev_rx() entry %d status was %#08x.\n", | |
2300 | entry, desc_status); | |
2301 | if (--boguscnt < 0) | |
2302 | break; | |
b27a16b7 MB |
2303 | |
2304 | if (*work_done >= work_to_do) | |
2305 | break; | |
2306 | ||
2307 | (*work_done)++; | |
2308 | ||
1da177e4 LT |
2309 | pkt_len = (desc_status & DescSizeMask) - 4; |
2310 | if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){ | |
2311 | if (desc_status & DescMore) { | |
2312 | if (netif_msg_rx_err(np)) | |
2313 | printk(KERN_WARNING | |
2314 | "%s: Oversized(?) Ethernet " | |
2315 | "frame spanned multiple " | |
2316 | "buffers, entry %#08x " | |
2317 | "status %#08x.\n", dev->name, | |
2318 | np->cur_rx, desc_status); | |
2319 | np->stats.rx_length_errors++; | |
e72fd96e MB |
2320 | |
2321 | /* The RX state machine has probably | |
2322 | * locked up beneath us. Follow the | |
2323 | * reset procedure documented in | |
2324 | * AN-1287. */ | |
2325 | ||
2326 | spin_lock_irq(&np->lock); | |
2327 | reset_rx(dev); | |
2328 | reinit_rx(dev); | |
2329 | writel(np->ring_dma, ioaddr + RxRingPtr); | |
2330 | check_link(dev); | |
2331 | spin_unlock_irq(&np->lock); | |
2332 | ||
2333 | /* We'll enable RX on exit from this | |
2334 | * function. */ | |
2335 | break; | |
2336 | ||
1da177e4 LT |
2337 | } else { |
2338 | /* There was an error. */ | |
2339 | np->stats.rx_errors++; | |
2340 | if (desc_status & (DescRxAbort|DescRxOver)) | |
2341 | np->stats.rx_over_errors++; | |
2342 | if (desc_status & (DescRxLong|DescRxRunt)) | |
2343 | np->stats.rx_length_errors++; | |
2344 | if (desc_status & (DescRxInvalid|DescRxAlign)) | |
2345 | np->stats.rx_frame_errors++; | |
2346 | if (desc_status & DescRxCRC) | |
2347 | np->stats.rx_crc_errors++; | |
2348 | } | |
2349 | } else if (pkt_len > np->rx_buf_sz) { | |
2350 | /* if this is the tail of a double buffer | |
2351 | * packet, we've already counted the error | |
2352 | * on the first part. Ignore the second half. | |
2353 | */ | |
2354 | } else { | |
2355 | struct sk_buff *skb; | |
2356 | /* Omit CRC size. */ | |
2357 | /* Check if the packet is long enough to accept | |
2358 | * without copying to a minimally-sized skbuff. */ | |
2359 | if (pkt_len < rx_copybreak | |
2360 | && (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) { | |
2361 | skb->dev = dev; | |
2362 | /* 16 byte align the IP header */ | |
2363 | skb_reserve(skb, RX_OFFSET); | |
2364 | pci_dma_sync_single_for_cpu(np->pci_dev, | |
2365 | np->rx_dma[entry], | |
2366 | buflen, | |
2367 | PCI_DMA_FROMDEVICE); | |
2368 | eth_copy_and_sum(skb, | |
689be439 | 2369 | np->rx_skbuff[entry]->data, pkt_len, 0); |
1da177e4 LT |
2370 | skb_put(skb, pkt_len); |
2371 | pci_dma_sync_single_for_device(np->pci_dev, | |
2372 | np->rx_dma[entry], | |
2373 | buflen, | |
2374 | PCI_DMA_FROMDEVICE); | |
2375 | } else { | |
2376 | pci_unmap_single(np->pci_dev, np->rx_dma[entry], | |
2377 | buflen, PCI_DMA_FROMDEVICE); | |
2378 | skb_put(skb = np->rx_skbuff[entry], pkt_len); | |
2379 | np->rx_skbuff[entry] = NULL; | |
2380 | } | |
2381 | skb->protocol = eth_type_trans(skb, dev); | |
b27a16b7 | 2382 | netif_receive_skb(skb); |
1da177e4 LT |
2383 | dev->last_rx = jiffies; |
2384 | np->stats.rx_packets++; | |
2385 | np->stats.rx_bytes += pkt_len; | |
2386 | } | |
2387 | entry = (++np->cur_rx) % RX_RING_SIZE; | |
2388 | np->rx_head_desc = &np->rx_ring[entry]; | |
2389 | desc_status = le32_to_cpu(np->rx_head_desc->cmd_status); | |
2390 | } | |
2391 | refill_rx(dev); | |
2392 | ||
2393 | /* Restart Rx engine if stopped. */ | |
2394 | if (np->oom) | |
2395 | mod_timer(&np->timer, jiffies + 1); | |
2396 | else | |
2397 | writel(RxOn, ioaddr + ChipCmd); | |
2398 | } | |
2399 | ||
2400 | static void netdev_error(struct net_device *dev, int intr_status) | |
2401 | { | |
2402 | struct netdev_private *np = netdev_priv(dev); | |
2403 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2404 | ||
2405 | spin_lock(&np->lock); | |
2406 | if (intr_status & LinkChange) { | |
2407 | u16 lpa = mdio_read(dev, MII_LPA); | |
2408 | if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE | |
2409 | && netif_msg_link(np)) { | |
2410 | printk(KERN_INFO | |
2411 | "%s: Autonegotiation advertising" | |
2412 | " %#04x partner %#04x.\n", dev->name, | |
2413 | np->advertising, lpa); | |
2414 | } | |
2415 | ||
2416 | /* read MII int status to clear the flag */ | |
2417 | readw(ioaddr + MIntrStatus); | |
2418 | check_link(dev); | |
2419 | } | |
2420 | if (intr_status & StatsMax) { | |
2421 | __get_stats(dev); | |
2422 | } | |
2423 | if (intr_status & IntrTxUnderrun) { | |
2424 | if ((np->tx_config & TxDrthMask) < TX_DRTH_VAL_LIMIT) { | |
2425 | np->tx_config += TX_DRTH_VAL_INC; | |
2426 | if (netif_msg_tx_err(np)) | |
2427 | printk(KERN_NOTICE | |
2428 | "%s: increased tx threshold, txcfg %#08x.\n", | |
2429 | dev->name, np->tx_config); | |
2430 | } else { | |
2431 | if (netif_msg_tx_err(np)) | |
2432 | printk(KERN_NOTICE | |
2433 | "%s: tx underrun with maximum tx threshold, txcfg %#08x.\n", | |
2434 | dev->name, np->tx_config); | |
2435 | } | |
2436 | writel(np->tx_config, ioaddr + TxConfig); | |
2437 | } | |
2438 | if (intr_status & WOLPkt && netif_msg_wol(np)) { | |
2439 | int wol_status = readl(ioaddr + WOLCmd); | |
2440 | printk(KERN_NOTICE "%s: Link wake-up event %#08x\n", | |
2441 | dev->name, wol_status); | |
2442 | } | |
2443 | if (intr_status & RxStatusFIFOOver) { | |
2444 | if (netif_msg_rx_err(np) && netif_msg_intr(np)) { | |
2445 | printk(KERN_NOTICE "%s: Rx status FIFO overrun\n", | |
2446 | dev->name); | |
2447 | } | |
2448 | np->stats.rx_fifo_errors++; | |
2449 | } | |
2450 | /* Hmmmmm, it's not clear how to recover from PCI faults. */ | |
2451 | if (intr_status & IntrPCIErr) { | |
2452 | printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name, | |
2453 | intr_status & IntrPCIErr); | |
2454 | np->stats.tx_fifo_errors++; | |
2455 | np->stats.rx_fifo_errors++; | |
2456 | } | |
2457 | spin_unlock(&np->lock); | |
2458 | } | |
2459 | ||
2460 | static void __get_stats(struct net_device *dev) | |
2461 | { | |
2462 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2463 | struct netdev_private *np = netdev_priv(dev); | |
2464 | ||
2465 | /* The chip only need report frame silently dropped. */ | |
2466 | np->stats.rx_crc_errors += readl(ioaddr + RxCRCErrs); | |
2467 | np->stats.rx_missed_errors += readl(ioaddr + RxMissed); | |
2468 | } | |
2469 | ||
2470 | static struct net_device_stats *get_stats(struct net_device *dev) | |
2471 | { | |
2472 | struct netdev_private *np = netdev_priv(dev); | |
2473 | ||
2474 | /* The chip only need report frame silently dropped. */ | |
2475 | spin_lock_irq(&np->lock); | |
2476 | if (netif_running(dev) && !np->hands_off) | |
2477 | __get_stats(dev); | |
2478 | spin_unlock_irq(&np->lock); | |
2479 | ||
2480 | return &np->stats; | |
2481 | } | |
2482 | ||
2483 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
2484 | static void natsemi_poll_controller(struct net_device *dev) | |
2485 | { | |
2486 | disable_irq(dev->irq); | |
2487 | intr_handler(dev->irq, dev, NULL); | |
2488 | enable_irq(dev->irq); | |
2489 | } | |
2490 | #endif | |
2491 | ||
2492 | #define HASH_TABLE 0x200 | |
2493 | static void __set_rx_mode(struct net_device *dev) | |
2494 | { | |
2495 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2496 | struct netdev_private *np = netdev_priv(dev); | |
2497 | u8 mc_filter[64]; /* Multicast hash filter */ | |
2498 | u32 rx_mode; | |
2499 | ||
2500 | if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ | |
2501 | /* Unconditionally log net taps. */ | |
2502 | printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", | |
2503 | dev->name); | |
2504 | rx_mode = RxFilterEnable | AcceptBroadcast | |
2505 | | AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys; | |
2506 | } else if ((dev->mc_count > multicast_filter_limit) | |
2507 | || (dev->flags & IFF_ALLMULTI)) { | |
2508 | rx_mode = RxFilterEnable | AcceptBroadcast | |
2509 | | AcceptAllMulticast | AcceptMyPhys; | |
2510 | } else { | |
2511 | struct dev_mc_list *mclist; | |
2512 | int i; | |
2513 | memset(mc_filter, 0, sizeof(mc_filter)); | |
2514 | for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; | |
2515 | i++, mclist = mclist->next) { | |
2516 | int i = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff; | |
2517 | mc_filter[i/8] |= (1 << (i & 0x07)); | |
2518 | } | |
2519 | rx_mode = RxFilterEnable | AcceptBroadcast | |
2520 | | AcceptMulticast | AcceptMyPhys; | |
2521 | for (i = 0; i < 64; i += 2) { | |
760f86d7 HX |
2522 | writel(HASH_TABLE + i, ioaddr + RxFilterAddr); |
2523 | writel((mc_filter[i + 1] << 8) + mc_filter[i], | |
2524 | ioaddr + RxFilterData); | |
1da177e4 LT |
2525 | } |
2526 | } | |
2527 | writel(rx_mode, ioaddr + RxFilterAddr); | |
2528 | np->cur_rx_mode = rx_mode; | |
2529 | } | |
2530 | ||
2531 | static int natsemi_change_mtu(struct net_device *dev, int new_mtu) | |
2532 | { | |
2533 | if (new_mtu < 64 || new_mtu > NATSEMI_RX_LIMIT-NATSEMI_HEADERS) | |
2534 | return -EINVAL; | |
2535 | ||
2536 | dev->mtu = new_mtu; | |
2537 | ||
2538 | /* synchronized against open : rtnl_lock() held by caller */ | |
2539 | if (netif_running(dev)) { | |
2540 | struct netdev_private *np = netdev_priv(dev); | |
2541 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2542 | ||
2543 | disable_irq(dev->irq); | |
2544 | spin_lock(&np->lock); | |
2545 | /* stop engines */ | |
2546 | natsemi_stop_rxtx(dev); | |
2547 | /* drain rx queue */ | |
2548 | drain_rx(dev); | |
2549 | /* change buffers */ | |
2550 | set_bufsize(dev); | |
2551 | reinit_rx(dev); | |
2552 | writel(np->ring_dma, ioaddr + RxRingPtr); | |
2553 | /* restart engines */ | |
2554 | writel(RxOn | TxOn, ioaddr + ChipCmd); | |
2555 | spin_unlock(&np->lock); | |
2556 | enable_irq(dev->irq); | |
2557 | } | |
2558 | return 0; | |
2559 | } | |
2560 | ||
2561 | static void set_rx_mode(struct net_device *dev) | |
2562 | { | |
2563 | struct netdev_private *np = netdev_priv(dev); | |
2564 | spin_lock_irq(&np->lock); | |
2565 | if (!np->hands_off) | |
2566 | __set_rx_mode(dev); | |
2567 | spin_unlock_irq(&np->lock); | |
2568 | } | |
2569 | ||
2570 | static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | |
2571 | { | |
2572 | struct netdev_private *np = netdev_priv(dev); | |
2573 | strncpy(info->driver, DRV_NAME, ETHTOOL_BUSINFO_LEN); | |
2574 | strncpy(info->version, DRV_VERSION, ETHTOOL_BUSINFO_LEN); | |
2575 | strncpy(info->bus_info, pci_name(np->pci_dev), ETHTOOL_BUSINFO_LEN); | |
2576 | } | |
2577 | ||
2578 | static int get_regs_len(struct net_device *dev) | |
2579 | { | |
2580 | return NATSEMI_REGS_SIZE; | |
2581 | } | |
2582 | ||
2583 | static int get_eeprom_len(struct net_device *dev) | |
2584 | { | |
a8b4cf42 MB |
2585 | struct netdev_private *np = netdev_priv(dev); |
2586 | return np->eeprom_size; | |
1da177e4 LT |
2587 | } |
2588 | ||
2589 | static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | |
2590 | { | |
2591 | struct netdev_private *np = netdev_priv(dev); | |
2592 | spin_lock_irq(&np->lock); | |
2593 | netdev_get_ecmd(dev, ecmd); | |
2594 | spin_unlock_irq(&np->lock); | |
2595 | return 0; | |
2596 | } | |
2597 | ||
2598 | static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | |
2599 | { | |
2600 | struct netdev_private *np = netdev_priv(dev); | |
2601 | int res; | |
2602 | spin_lock_irq(&np->lock); | |
2603 | res = netdev_set_ecmd(dev, ecmd); | |
2604 | spin_unlock_irq(&np->lock); | |
2605 | return res; | |
2606 | } | |
2607 | ||
2608 | static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | |
2609 | { | |
2610 | struct netdev_private *np = netdev_priv(dev); | |
2611 | spin_lock_irq(&np->lock); | |
2612 | netdev_get_wol(dev, &wol->supported, &wol->wolopts); | |
2613 | netdev_get_sopass(dev, wol->sopass); | |
2614 | spin_unlock_irq(&np->lock); | |
2615 | } | |
2616 | ||
2617 | static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | |
2618 | { | |
2619 | struct netdev_private *np = netdev_priv(dev); | |
2620 | int res; | |
2621 | spin_lock_irq(&np->lock); | |
2622 | netdev_set_wol(dev, wol->wolopts); | |
2623 | res = netdev_set_sopass(dev, wol->sopass); | |
2624 | spin_unlock_irq(&np->lock); | |
2625 | return res; | |
2626 | } | |
2627 | ||
2628 | static void get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) | |
2629 | { | |
2630 | struct netdev_private *np = netdev_priv(dev); | |
2631 | regs->version = NATSEMI_REGS_VER; | |
2632 | spin_lock_irq(&np->lock); | |
2633 | netdev_get_regs(dev, buf); | |
2634 | spin_unlock_irq(&np->lock); | |
2635 | } | |
2636 | ||
2637 | static u32 get_msglevel(struct net_device *dev) | |
2638 | { | |
2639 | struct netdev_private *np = netdev_priv(dev); | |
2640 | return np->msg_enable; | |
2641 | } | |
2642 | ||
2643 | static void set_msglevel(struct net_device *dev, u32 val) | |
2644 | { | |
2645 | struct netdev_private *np = netdev_priv(dev); | |
2646 | np->msg_enable = val; | |
2647 | } | |
2648 | ||
2649 | static int nway_reset(struct net_device *dev) | |
2650 | { | |
2651 | int tmp; | |
2652 | int r = -EINVAL; | |
2653 | /* if autoneg is off, it's an error */ | |
2654 | tmp = mdio_read(dev, MII_BMCR); | |
2655 | if (tmp & BMCR_ANENABLE) { | |
2656 | tmp |= (BMCR_ANRESTART); | |
2657 | mdio_write(dev, MII_BMCR, tmp); | |
2658 | r = 0; | |
2659 | } | |
2660 | return r; | |
2661 | } | |
2662 | ||
2663 | static u32 get_link(struct net_device *dev) | |
2664 | { | |
2665 | /* LSTATUS is latched low until a read - so read twice */ | |
2666 | mdio_read(dev, MII_BMSR); | |
2667 | return (mdio_read(dev, MII_BMSR)&BMSR_LSTATUS) ? 1:0; | |
2668 | } | |
2669 | ||
2670 | static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data) | |
2671 | { | |
2672 | struct netdev_private *np = netdev_priv(dev); | |
a8b4cf42 | 2673 | u8 *eebuf; |
1da177e4 LT |
2674 | int res; |
2675 | ||
a8b4cf42 MB |
2676 | eebuf = kmalloc(np->eeprom_size, GFP_KERNEL); |
2677 | if (!eebuf) | |
2678 | return -ENOMEM; | |
2679 | ||
1da177e4 LT |
2680 | eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16); |
2681 | spin_lock_irq(&np->lock); | |
2682 | res = netdev_get_eeprom(dev, eebuf); | |
2683 | spin_unlock_irq(&np->lock); | |
2684 | if (!res) | |
2685 | memcpy(data, eebuf+eeprom->offset, eeprom->len); | |
a8b4cf42 | 2686 | kfree(eebuf); |
1da177e4 LT |
2687 | return res; |
2688 | } | |
2689 | ||
2690 | static struct ethtool_ops ethtool_ops = { | |
2691 | .get_drvinfo = get_drvinfo, | |
2692 | .get_regs_len = get_regs_len, | |
2693 | .get_eeprom_len = get_eeprom_len, | |
2694 | .get_settings = get_settings, | |
2695 | .set_settings = set_settings, | |
2696 | .get_wol = get_wol, | |
2697 | .set_wol = set_wol, | |
2698 | .get_regs = get_regs, | |
2699 | .get_msglevel = get_msglevel, | |
2700 | .set_msglevel = set_msglevel, | |
2701 | .nway_reset = nway_reset, | |
2702 | .get_link = get_link, | |
2703 | .get_eeprom = get_eeprom, | |
2704 | }; | |
2705 | ||
2706 | static int netdev_set_wol(struct net_device *dev, u32 newval) | |
2707 | { | |
2708 | struct netdev_private *np = netdev_priv(dev); | |
2709 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2710 | u32 data = readl(ioaddr + WOLCmd) & ~WakeOptsSummary; | |
2711 | ||
2712 | /* translate to bitmasks this chip understands */ | |
2713 | if (newval & WAKE_PHY) | |
2714 | data |= WakePhy; | |
2715 | if (newval & WAKE_UCAST) | |
2716 | data |= WakeUnicast; | |
2717 | if (newval & WAKE_MCAST) | |
2718 | data |= WakeMulticast; | |
2719 | if (newval & WAKE_BCAST) | |
2720 | data |= WakeBroadcast; | |
2721 | if (newval & WAKE_ARP) | |
2722 | data |= WakeArp; | |
2723 | if (newval & WAKE_MAGIC) | |
2724 | data |= WakeMagic; | |
2725 | if (np->srr >= SRR_DP83815_D) { | |
2726 | if (newval & WAKE_MAGICSECURE) { | |
2727 | data |= WakeMagicSecure; | |
2728 | } | |
2729 | } | |
2730 | ||
2731 | writel(data, ioaddr + WOLCmd); | |
2732 | ||
2733 | return 0; | |
2734 | } | |
2735 | ||
2736 | static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur) | |
2737 | { | |
2738 | struct netdev_private *np = netdev_priv(dev); | |
2739 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2740 | u32 regval = readl(ioaddr + WOLCmd); | |
2741 | ||
2742 | *supported = (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | |
2743 | | WAKE_ARP | WAKE_MAGIC); | |
2744 | ||
2745 | if (np->srr >= SRR_DP83815_D) { | |
2746 | /* SOPASS works on revD and higher */ | |
2747 | *supported |= WAKE_MAGICSECURE; | |
2748 | } | |
2749 | *cur = 0; | |
2750 | ||
2751 | /* translate from chip bitmasks */ | |
2752 | if (regval & WakePhy) | |
2753 | *cur |= WAKE_PHY; | |
2754 | if (regval & WakeUnicast) | |
2755 | *cur |= WAKE_UCAST; | |
2756 | if (regval & WakeMulticast) | |
2757 | *cur |= WAKE_MCAST; | |
2758 | if (regval & WakeBroadcast) | |
2759 | *cur |= WAKE_BCAST; | |
2760 | if (regval & WakeArp) | |
2761 | *cur |= WAKE_ARP; | |
2762 | if (regval & WakeMagic) | |
2763 | *cur |= WAKE_MAGIC; | |
2764 | if (regval & WakeMagicSecure) { | |
2765 | /* this can be on in revC, but it's broken */ | |
2766 | *cur |= WAKE_MAGICSECURE; | |
2767 | } | |
2768 | ||
2769 | return 0; | |
2770 | } | |
2771 | ||
2772 | static int netdev_set_sopass(struct net_device *dev, u8 *newval) | |
2773 | { | |
2774 | struct netdev_private *np = netdev_priv(dev); | |
2775 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2776 | u16 *sval = (u16 *)newval; | |
2777 | u32 addr; | |
2778 | ||
2779 | if (np->srr < SRR_DP83815_D) { | |
2780 | return 0; | |
2781 | } | |
2782 | ||
2783 | /* enable writing to these registers by disabling the RX filter */ | |
2784 | addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask; | |
2785 | addr &= ~RxFilterEnable; | |
2786 | writel(addr, ioaddr + RxFilterAddr); | |
2787 | ||
2788 | /* write the three words to (undocumented) RFCR vals 0xa, 0xc, 0xe */ | |
2789 | writel(addr | 0xa, ioaddr + RxFilterAddr); | |
2790 | writew(sval[0], ioaddr + RxFilterData); | |
2791 | ||
2792 | writel(addr | 0xc, ioaddr + RxFilterAddr); | |
2793 | writew(sval[1], ioaddr + RxFilterData); | |
2794 | ||
2795 | writel(addr | 0xe, ioaddr + RxFilterAddr); | |
2796 | writew(sval[2], ioaddr + RxFilterData); | |
2797 | ||
2798 | /* re-enable the RX filter */ | |
2799 | writel(addr | RxFilterEnable, ioaddr + RxFilterAddr); | |
2800 | ||
2801 | return 0; | |
2802 | } | |
2803 | ||
2804 | static int netdev_get_sopass(struct net_device *dev, u8 *data) | |
2805 | { | |
2806 | struct netdev_private *np = netdev_priv(dev); | |
2807 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2808 | u16 *sval = (u16 *)data; | |
2809 | u32 addr; | |
2810 | ||
2811 | if (np->srr < SRR_DP83815_D) { | |
2812 | sval[0] = sval[1] = sval[2] = 0; | |
2813 | return 0; | |
2814 | } | |
2815 | ||
2816 | /* read the three words from (undocumented) RFCR vals 0xa, 0xc, 0xe */ | |
2817 | addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask; | |
2818 | ||
2819 | writel(addr | 0xa, ioaddr + RxFilterAddr); | |
2820 | sval[0] = readw(ioaddr + RxFilterData); | |
2821 | ||
2822 | writel(addr | 0xc, ioaddr + RxFilterAddr); | |
2823 | sval[1] = readw(ioaddr + RxFilterData); | |
2824 | ||
2825 | writel(addr | 0xe, ioaddr + RxFilterAddr); | |
2826 | sval[2] = readw(ioaddr + RxFilterData); | |
2827 | ||
2828 | writel(addr, ioaddr + RxFilterAddr); | |
2829 | ||
2830 | return 0; | |
2831 | } | |
2832 | ||
2833 | static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) | |
2834 | { | |
2835 | struct netdev_private *np = netdev_priv(dev); | |
2836 | u32 tmp; | |
2837 | ||
2838 | ecmd->port = dev->if_port; | |
2839 | ecmd->speed = np->speed; | |
2840 | ecmd->duplex = np->duplex; | |
2841 | ecmd->autoneg = np->autoneg; | |
2842 | ecmd->advertising = 0; | |
2843 | if (np->advertising & ADVERTISE_10HALF) | |
2844 | ecmd->advertising |= ADVERTISED_10baseT_Half; | |
2845 | if (np->advertising & ADVERTISE_10FULL) | |
2846 | ecmd->advertising |= ADVERTISED_10baseT_Full; | |
2847 | if (np->advertising & ADVERTISE_100HALF) | |
2848 | ecmd->advertising |= ADVERTISED_100baseT_Half; | |
2849 | if (np->advertising & ADVERTISE_100FULL) | |
2850 | ecmd->advertising |= ADVERTISED_100baseT_Full; | |
2851 | ecmd->supported = (SUPPORTED_Autoneg | | |
2852 | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | | |
2853 | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | | |
2854 | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE); | |
2855 | ecmd->phy_address = np->phy_addr_external; | |
2856 | /* | |
2857 | * We intentionally report the phy address of the external | |
2858 | * phy, even if the internal phy is used. This is necessary | |
2859 | * to work around a deficiency of the ethtool interface: | |
2860 | * It's only possible to query the settings of the active | |
2861 | * port. Therefore | |
2862 | * # ethtool -s ethX port mii | |
2863 | * actually sends an ioctl to switch to port mii with the | |
2864 | * settings that are used for the current active port. | |
2865 | * If we would report a different phy address in this | |
2866 | * command, then | |
2867 | * # ethtool -s ethX port tp;ethtool -s ethX port mii | |
2868 | * would unintentionally change the phy address. | |
2869 | * | |
2870 | * Fortunately the phy address doesn't matter with the | |
2871 | * internal phy... | |
2872 | */ | |
2873 | ||
2874 | /* set information based on active port type */ | |
2875 | switch (ecmd->port) { | |
2876 | default: | |
2877 | case PORT_TP: | |
2878 | ecmd->advertising |= ADVERTISED_TP; | |
2879 | ecmd->transceiver = XCVR_INTERNAL; | |
2880 | break; | |
2881 | case PORT_MII: | |
2882 | ecmd->advertising |= ADVERTISED_MII; | |
2883 | ecmd->transceiver = XCVR_EXTERNAL; | |
2884 | break; | |
2885 | case PORT_FIBRE: | |
2886 | ecmd->advertising |= ADVERTISED_FIBRE; | |
2887 | ecmd->transceiver = XCVR_EXTERNAL; | |
2888 | break; | |
2889 | } | |
2890 | ||
2891 | /* if autonegotiation is on, try to return the active speed/duplex */ | |
2892 | if (ecmd->autoneg == AUTONEG_ENABLE) { | |
2893 | ecmd->advertising |= ADVERTISED_Autoneg; | |
2894 | tmp = mii_nway_result( | |
2895 | np->advertising & mdio_read(dev, MII_LPA)); | |
2896 | if (tmp == LPA_100FULL || tmp == LPA_100HALF) | |
2897 | ecmd->speed = SPEED_100; | |
2898 | else | |
2899 | ecmd->speed = SPEED_10; | |
2900 | if (tmp == LPA_100FULL || tmp == LPA_10FULL) | |
2901 | ecmd->duplex = DUPLEX_FULL; | |
2902 | else | |
2903 | ecmd->duplex = DUPLEX_HALF; | |
2904 | } | |
2905 | ||
2906 | /* ignore maxtxpkt, maxrxpkt for now */ | |
2907 | ||
2908 | return 0; | |
2909 | } | |
2910 | ||
2911 | static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) | |
2912 | { | |
2913 | struct netdev_private *np = netdev_priv(dev); | |
2914 | ||
2915 | if (ecmd->port != PORT_TP && ecmd->port != PORT_MII && ecmd->port != PORT_FIBRE) | |
2916 | return -EINVAL; | |
2917 | if (ecmd->transceiver != XCVR_INTERNAL && ecmd->transceiver != XCVR_EXTERNAL) | |
2918 | return -EINVAL; | |
2919 | if (ecmd->autoneg == AUTONEG_ENABLE) { | |
2920 | if ((ecmd->advertising & (ADVERTISED_10baseT_Half | | |
2921 | ADVERTISED_10baseT_Full | | |
2922 | ADVERTISED_100baseT_Half | | |
2923 | ADVERTISED_100baseT_Full)) == 0) { | |
2924 | return -EINVAL; | |
2925 | } | |
2926 | } else if (ecmd->autoneg == AUTONEG_DISABLE) { | |
2927 | if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100) | |
2928 | return -EINVAL; | |
2929 | if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) | |
2930 | return -EINVAL; | |
2931 | } else { | |
2932 | return -EINVAL; | |
2933 | } | |
2934 | ||
2935 | /* | |
2936 | * maxtxpkt, maxrxpkt: ignored for now. | |
2937 | * | |
2938 | * transceiver: | |
2939 | * PORT_TP is always XCVR_INTERNAL, PORT_MII and PORT_FIBRE are always | |
2940 | * XCVR_EXTERNAL. The implementation thus ignores ecmd->transceiver and | |
2941 | * selects based on ecmd->port. | |
2942 | * | |
2943 | * Actually PORT_FIBRE is nearly identical to PORT_MII: it's for fibre | |
2944 | * phys that are connected to the mii bus. It's used to apply fibre | |
2945 | * specific updates. | |
2946 | */ | |
2947 | ||
2948 | /* WHEW! now lets bang some bits */ | |
2949 | ||
2950 | /* save the parms */ | |
2951 | dev->if_port = ecmd->port; | |
2952 | np->autoneg = ecmd->autoneg; | |
2953 | np->phy_addr_external = ecmd->phy_address & PhyAddrMask; | |
2954 | if (np->autoneg == AUTONEG_ENABLE) { | |
2955 | /* advertise only what has been requested */ | |
2956 | np->advertising &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); | |
2957 | if (ecmd->advertising & ADVERTISED_10baseT_Half) | |
2958 | np->advertising |= ADVERTISE_10HALF; | |
2959 | if (ecmd->advertising & ADVERTISED_10baseT_Full) | |
2960 | np->advertising |= ADVERTISE_10FULL; | |
2961 | if (ecmd->advertising & ADVERTISED_100baseT_Half) | |
2962 | np->advertising |= ADVERTISE_100HALF; | |
2963 | if (ecmd->advertising & ADVERTISED_100baseT_Full) | |
2964 | np->advertising |= ADVERTISE_100FULL; | |
2965 | } else { | |
2966 | np->speed = ecmd->speed; | |
2967 | np->duplex = ecmd->duplex; | |
2968 | /* user overriding the initial full duplex parm? */ | |
2969 | if (np->duplex == DUPLEX_HALF) | |
2970 | np->full_duplex = 0; | |
2971 | } | |
2972 | ||
2973 | /* get the right phy enabled */ | |
2974 | if (ecmd->port == PORT_TP) | |
2975 | switch_port_internal(dev); | |
2976 | else | |
2977 | switch_port_external(dev); | |
2978 | ||
2979 | /* set parms and see how this affected our link status */ | |
2980 | init_phy_fixup(dev); | |
2981 | check_link(dev); | |
2982 | return 0; | |
2983 | } | |
2984 | ||
2985 | static int netdev_get_regs(struct net_device *dev, u8 *buf) | |
2986 | { | |
2987 | int i; | |
2988 | int j; | |
2989 | u32 rfcr; | |
2990 | u32 *rbuf = (u32 *)buf; | |
2991 | void __iomem * ioaddr = ns_ioaddr(dev); | |
2992 | ||
2993 | /* read non-mii page 0 of registers */ | |
2994 | for (i = 0; i < NATSEMI_PG0_NREGS/2; i++) { | |
2995 | rbuf[i] = readl(ioaddr + i*4); | |
2996 | } | |
2997 | ||
2998 | /* read current mii registers */ | |
2999 | for (i = NATSEMI_PG0_NREGS/2; i < NATSEMI_PG0_NREGS; i++) | |
3000 | rbuf[i] = mdio_read(dev, i & 0x1f); | |
3001 | ||
3002 | /* read only the 'magic' registers from page 1 */ | |
3003 | writew(1, ioaddr + PGSEL); | |
3004 | rbuf[i++] = readw(ioaddr + PMDCSR); | |
3005 | rbuf[i++] = readw(ioaddr + TSTDAT); | |
3006 | rbuf[i++] = readw(ioaddr + DSPCFG); | |
3007 | rbuf[i++] = readw(ioaddr + SDCFG); | |
3008 | writew(0, ioaddr + PGSEL); | |
3009 | ||
3010 | /* read RFCR indexed registers */ | |
3011 | rfcr = readl(ioaddr + RxFilterAddr); | |
3012 | for (j = 0; j < NATSEMI_RFDR_NREGS; j++) { | |
3013 | writel(j*2, ioaddr + RxFilterAddr); | |
3014 | rbuf[i++] = readw(ioaddr + RxFilterData); | |
3015 | } | |
3016 | writel(rfcr, ioaddr + RxFilterAddr); | |
3017 | ||
3018 | /* the interrupt status is clear-on-read - see if we missed any */ | |
3019 | if (rbuf[4] & rbuf[5]) { | |
3020 | printk(KERN_WARNING | |
3021 | "%s: shoot, we dropped an interrupt (%#08x)\n", | |
3022 | dev->name, rbuf[4] & rbuf[5]); | |
3023 | } | |
3024 | ||
3025 | return 0; | |
3026 | } | |
3027 | ||
3028 | #define SWAP_BITS(x) ( (((x) & 0x0001) << 15) | (((x) & 0x0002) << 13) \ | |
3029 | | (((x) & 0x0004) << 11) | (((x) & 0x0008) << 9) \ | |
3030 | | (((x) & 0x0010) << 7) | (((x) & 0x0020) << 5) \ | |
3031 | | (((x) & 0x0040) << 3) | (((x) & 0x0080) << 1) \ | |
3032 | | (((x) & 0x0100) >> 1) | (((x) & 0x0200) >> 3) \ | |
3033 | | (((x) & 0x0400) >> 5) | (((x) & 0x0800) >> 7) \ | |
3034 | | (((x) & 0x1000) >> 9) | (((x) & 0x2000) >> 11) \ | |
3035 | | (((x) & 0x4000) >> 13) | (((x) & 0x8000) >> 15) ) | |
3036 | ||
3037 | static int netdev_get_eeprom(struct net_device *dev, u8 *buf) | |
3038 | { | |
3039 | int i; | |
3040 | u16 *ebuf = (u16 *)buf; | |
3041 | void __iomem * ioaddr = ns_ioaddr(dev); | |
a8b4cf42 | 3042 | struct netdev_private *np = netdev_priv(dev); |
1da177e4 LT |
3043 | |
3044 | /* eeprom_read reads 16 bits, and indexes by 16 bits */ | |
a8b4cf42 | 3045 | for (i = 0; i < np->eeprom_size/2; i++) { |
1da177e4 LT |
3046 | ebuf[i] = eeprom_read(ioaddr, i); |
3047 | /* The EEPROM itself stores data bit-swapped, but eeprom_read | |
3048 | * reads it back "sanely". So we swap it back here in order to | |
3049 | * present it to userland as it is stored. */ | |
3050 | ebuf[i] = SWAP_BITS(ebuf[i]); | |
3051 | } | |
3052 | return 0; | |
3053 | } | |
3054 | ||
3055 | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
3056 | { | |
3057 | struct mii_ioctl_data *data = if_mii(rq); | |
3058 | struct netdev_private *np = netdev_priv(dev); | |
3059 | ||
3060 | switch(cmd) { | |
3061 | case SIOCGMIIPHY: /* Get address of MII PHY in use. */ | |
3062 | case SIOCDEVPRIVATE: /* for binary compat, remove in 2.5 */ | |
3063 | data->phy_id = np->phy_addr_external; | |
3064 | /* Fall Through */ | |
3065 | ||
3066 | case SIOCGMIIREG: /* Read MII PHY register. */ | |
3067 | case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */ | |
3068 | /* The phy_id is not enough to uniquely identify | |
3069 | * the intended target. Therefore the command is sent to | |
3070 | * the given mii on the current port. | |
3071 | */ | |
3072 | if (dev->if_port == PORT_TP) { | |
3073 | if ((data->phy_id & 0x1f) == np->phy_addr_external) | |
3074 | data->val_out = mdio_read(dev, | |
3075 | data->reg_num & 0x1f); | |
3076 | else | |
3077 | data->val_out = 0; | |
3078 | } else { | |
3079 | move_int_phy(dev, data->phy_id & 0x1f); | |
3080 | data->val_out = miiport_read(dev, data->phy_id & 0x1f, | |
3081 | data->reg_num & 0x1f); | |
3082 | } | |
3083 | return 0; | |
3084 | ||
3085 | case SIOCSMIIREG: /* Write MII PHY register. */ | |
3086 | case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */ | |
3087 | if (!capable(CAP_NET_ADMIN)) | |
3088 | return -EPERM; | |
3089 | if (dev->if_port == PORT_TP) { | |
3090 | if ((data->phy_id & 0x1f) == np->phy_addr_external) { | |
3091 | if ((data->reg_num & 0x1f) == MII_ADVERTISE) | |
3092 | np->advertising = data->val_in; | |
3093 | mdio_write(dev, data->reg_num & 0x1f, | |
3094 | data->val_in); | |
3095 | } | |
3096 | } else { | |
3097 | if ((data->phy_id & 0x1f) == np->phy_addr_external) { | |
3098 | if ((data->reg_num & 0x1f) == MII_ADVERTISE) | |
3099 | np->advertising = data->val_in; | |
3100 | } | |
3101 | move_int_phy(dev, data->phy_id & 0x1f); | |
3102 | miiport_write(dev, data->phy_id & 0x1f, | |
3103 | data->reg_num & 0x1f, | |
3104 | data->val_in); | |
3105 | } | |
3106 | return 0; | |
3107 | default: | |
3108 | return -EOPNOTSUPP; | |
3109 | } | |
3110 | } | |
3111 | ||
3112 | static void enable_wol_mode(struct net_device *dev, int enable_intr) | |
3113 | { | |
3114 | void __iomem * ioaddr = ns_ioaddr(dev); | |
3115 | struct netdev_private *np = netdev_priv(dev); | |
3116 | ||
3117 | if (netif_msg_wol(np)) | |
3118 | printk(KERN_INFO "%s: remaining active for wake-on-lan\n", | |
3119 | dev->name); | |
3120 | ||
3121 | /* For WOL we must restart the rx process in silent mode. | |
3122 | * Write NULL to the RxRingPtr. Only possible if | |
3123 | * rx process is stopped | |
3124 | */ | |
3125 | writel(0, ioaddr + RxRingPtr); | |
3126 | ||
3127 | /* read WoL status to clear */ | |
3128 | readl(ioaddr + WOLCmd); | |
3129 | ||
3130 | /* PME on, clear status */ | |
3131 | writel(np->SavedClkRun | PMEEnable | PMEStatus, ioaddr + ClkRun); | |
3132 | ||
3133 | /* and restart the rx process */ | |
3134 | writel(RxOn, ioaddr + ChipCmd); | |
3135 | ||
3136 | if (enable_intr) { | |
3137 | /* enable the WOL interrupt. | |
3138 | * Could be used to send a netlink message. | |
3139 | */ | |
3140 | writel(WOLPkt | LinkChange, ioaddr + IntrMask); | |
3141 | writel(1, ioaddr + IntrEnable); | |
3142 | } | |
3143 | } | |
3144 | ||
3145 | static int netdev_close(struct net_device *dev) | |
3146 | { | |
3147 | void __iomem * ioaddr = ns_ioaddr(dev); | |
3148 | struct netdev_private *np = netdev_priv(dev); | |
3149 | ||
3150 | if (netif_msg_ifdown(np)) | |
3151 | printk(KERN_DEBUG | |
3152 | "%s: Shutting down ethercard, status was %#04x.\n", | |
3153 | dev->name, (int)readl(ioaddr + ChipCmd)); | |
3154 | if (netif_msg_pktdata(np)) | |
3155 | printk(KERN_DEBUG | |
3156 | "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", | |
3157 | dev->name, np->cur_tx, np->dirty_tx, | |
3158 | np->cur_rx, np->dirty_rx); | |
3159 | ||
3160 | /* | |
3161 | * FIXME: what if someone tries to close a device | |
3162 | * that is suspended? | |
3163 | * Should we reenable the nic to switch to | |
3164 | * the final WOL settings? | |
3165 | */ | |
3166 | ||
3167 | del_timer_sync(&np->timer); | |
3168 | disable_irq(dev->irq); | |
3169 | spin_lock_irq(&np->lock); | |
b27a16b7 | 3170 | natsemi_irq_disable(dev); |
1da177e4 LT |
3171 | np->hands_off = 1; |
3172 | spin_unlock_irq(&np->lock); | |
3173 | enable_irq(dev->irq); | |
3174 | ||
3175 | free_irq(dev->irq, dev); | |
3176 | ||
3177 | /* Interrupt disabled, interrupt handler released, | |
3178 | * queue stopped, timer deleted, rtnl_lock held | |
3179 | * All async codepaths that access the driver are disabled. | |
3180 | */ | |
3181 | spin_lock_irq(&np->lock); | |
3182 | np->hands_off = 0; | |
3183 | readl(ioaddr + IntrMask); | |
3184 | readw(ioaddr + MIntrStatus); | |
3185 | ||
3186 | /* Freeze Stats */ | |
3187 | writel(StatsFreeze, ioaddr + StatsCtrl); | |
3188 | ||
3189 | /* Stop the chip's Tx and Rx processes. */ | |
3190 | natsemi_stop_rxtx(dev); | |
3191 | ||
3192 | __get_stats(dev); | |
3193 | spin_unlock_irq(&np->lock); | |
3194 | ||
3195 | /* clear the carrier last - an interrupt could reenable it otherwise */ | |
3196 | netif_carrier_off(dev); | |
3197 | netif_stop_queue(dev); | |
3198 | ||
3199 | dump_ring(dev); | |
3200 | drain_ring(dev); | |
3201 | free_ring(dev); | |
3202 | ||
3203 | { | |
3204 | u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary; | |
3205 | if (wol) { | |
3206 | /* restart the NIC in WOL mode. | |
3207 | * The nic must be stopped for this. | |
3208 | */ | |
3209 | enable_wol_mode(dev, 0); | |
3210 | } else { | |
3211 | /* Restore PME enable bit unmolested */ | |
3212 | writel(np->SavedClkRun, ioaddr + ClkRun); | |
3213 | } | |
3214 | } | |
3215 | return 0; | |
3216 | } | |
3217 | ||
3218 | ||
3219 | static void __devexit natsemi_remove1 (struct pci_dev *pdev) | |
3220 | { | |
3221 | struct net_device *dev = pci_get_drvdata(pdev); | |
3222 | void __iomem * ioaddr = ns_ioaddr(dev); | |
3223 | ||
3224 | unregister_netdev (dev); | |
3225 | pci_release_regions (pdev); | |
3226 | iounmap(ioaddr); | |
3227 | free_netdev (dev); | |
3228 | pci_set_drvdata(pdev, NULL); | |
3229 | } | |
3230 | ||
3231 | #ifdef CONFIG_PM | |
3232 | ||
3233 | /* | |
3234 | * The ns83815 chip doesn't have explicit RxStop bits. | |
3235 | * Kicking the Rx or Tx process for a new packet reenables the Rx process | |
3236 | * of the nic, thus this function must be very careful: | |
3237 | * | |
3238 | * suspend/resume synchronization: | |
3239 | * entry points: | |
3240 | * netdev_open, netdev_close, netdev_ioctl, set_rx_mode, intr_handler, | |
3241 | * start_tx, tx_timeout | |
3242 | * | |
3243 | * No function accesses the hardware without checking np->hands_off. | |
3244 | * the check occurs under spin_lock_irq(&np->lock); | |
3245 | * exceptions: | |
3246 | * * netdev_ioctl: noncritical access. | |
3247 | * * netdev_open: cannot happen due to the device_detach | |
3248 | * * netdev_close: doesn't hurt. | |
3249 | * * netdev_timer: timer stopped by natsemi_suspend. | |
3250 | * * intr_handler: doesn't acquire the spinlock. suspend calls | |
3251 | * disable_irq() to enforce synchronization. | |
b27a16b7 MB |
3252 | * * natsemi_poll: checks before reenabling interrupts. suspend |
3253 | * sets hands_off, disables interrupts and then waits with | |
3254 | * netif_poll_disable(). | |
1da177e4 LT |
3255 | * |
3256 | * Interrupts must be disabled, otherwise hands_off can cause irq storms. | |
3257 | */ | |
3258 | ||
3259 | static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state) | |
3260 | { | |
3261 | struct net_device *dev = pci_get_drvdata (pdev); | |
3262 | struct netdev_private *np = netdev_priv(dev); | |
3263 | void __iomem * ioaddr = ns_ioaddr(dev); | |
3264 | ||
3265 | rtnl_lock(); | |
3266 | if (netif_running (dev)) { | |
3267 | del_timer_sync(&np->timer); | |
3268 | ||
3269 | disable_irq(dev->irq); | |
3270 | spin_lock_irq(&np->lock); | |
3271 | ||
3272 | writel(0, ioaddr + IntrEnable); | |
3273 | np->hands_off = 1; | |
3274 | natsemi_stop_rxtx(dev); | |
3275 | netif_stop_queue(dev); | |
3276 | ||
3277 | spin_unlock_irq(&np->lock); | |
3278 | enable_irq(dev->irq); | |
3279 | ||
b27a16b7 MB |
3280 | netif_poll_disable(dev); |
3281 | ||
1da177e4 LT |
3282 | /* Update the error counts. */ |
3283 | __get_stats(dev); | |
3284 | ||
3285 | /* pci_power_off(pdev, -1); */ | |
3286 | drain_ring(dev); | |
3287 | { | |
3288 | u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary; | |
3289 | /* Restore PME enable bit */ | |
3290 | if (wol) { | |
3291 | /* restart the NIC in WOL mode. | |
3292 | * The nic must be stopped for this. | |
3293 | * FIXME: use the WOL interrupt | |
3294 | */ | |
3295 | enable_wol_mode(dev, 0); | |
3296 | } else { | |
3297 | /* Restore PME enable bit unmolested */ | |
3298 | writel(np->SavedClkRun, ioaddr + ClkRun); | |
3299 | } | |
3300 | } | |
3301 | } | |
3302 | netif_device_detach(dev); | |
3303 | rtnl_unlock(); | |
3304 | return 0; | |
3305 | } | |
3306 | ||
3307 | ||
3308 | static int natsemi_resume (struct pci_dev *pdev) | |
3309 | { | |
3310 | struct net_device *dev = pci_get_drvdata (pdev); | |
3311 | struct netdev_private *np = netdev_priv(dev); | |
3312 | ||
3313 | rtnl_lock(); | |
3314 | if (netif_device_present(dev)) | |
3315 | goto out; | |
3316 | if (netif_running(dev)) { | |
3317 | BUG_ON(!np->hands_off); | |
3318 | pci_enable_device(pdev); | |
3319 | /* pci_power_on(pdev); */ | |
3320 | ||
3321 | natsemi_reset(dev); | |
3322 | init_ring(dev); | |
3323 | disable_irq(dev->irq); | |
3324 | spin_lock_irq(&np->lock); | |
3325 | np->hands_off = 0; | |
3326 | init_registers(dev); | |
3327 | netif_device_attach(dev); | |
3328 | spin_unlock_irq(&np->lock); | |
3329 | enable_irq(dev->irq); | |
3330 | ||
3331 | mod_timer(&np->timer, jiffies + 1*HZ); | |
3332 | } | |
3333 | netif_device_attach(dev); | |
b27a16b7 | 3334 | netif_poll_enable(dev); |
1da177e4 LT |
3335 | out: |
3336 | rtnl_unlock(); | |
3337 | return 0; | |
3338 | } | |
3339 | ||
3340 | #endif /* CONFIG_PM */ | |
3341 | ||
3342 | static struct pci_driver natsemi_driver = { | |
3343 | .name = DRV_NAME, | |
3344 | .id_table = natsemi_pci_tbl, | |
3345 | .probe = natsemi_probe1, | |
3346 | .remove = __devexit_p(natsemi_remove1), | |
3347 | #ifdef CONFIG_PM | |
3348 | .suspend = natsemi_suspend, | |
3349 | .resume = natsemi_resume, | |
3350 | #endif | |
3351 | }; | |
3352 | ||
3353 | static int __init natsemi_init_mod (void) | |
3354 | { | |
3355 | /* when a module, this is printed whether or not devices are found in probe */ | |
3356 | #ifdef MODULE | |
3357 | printk(version); | |
3358 | #endif | |
3359 | ||
3360 | return pci_module_init (&natsemi_driver); | |
3361 | } | |
3362 | ||
3363 | static void __exit natsemi_exit_mod (void) | |
3364 | { | |
3365 | pci_unregister_driver (&natsemi_driver); | |
3366 | } | |
3367 | ||
3368 | module_init(natsemi_init_mod); | |
3369 | module_exit(natsemi_exit_mod); | |
3370 |