Commit | Line | Data |
---|---|---|
\9aöjfors, 2009-06-04 03:35:55 +0000" rowspan="553">b07878e5 R |
1 | /* |
2 | * ks8842_main.c timberdale KS8842 ethernet driver | |
3 | * Copyright (c) 2009 Intel Corporation | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License version 2 as | |
7 | * published by the Free Software Foundation. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | * GNU General Public License for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software | |
16 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
17 | */ | |
18 | ||
19 | /* Supports: | |
20 | * The Micrel KS8842 behind the timberdale FPGA | |
21 | */ | |
22 | ||
23 | #include <linux/kernel.h> | |
24 | #include <linux/module.h> | |
25 | #include <linux/platform_device.h> | |
26 | #include <linux/netdevice.h> | |
27 | #include <linux/etherdevice.h> | |
28 | #include <linux/ethtool.h> | |
29 | ||
30 | #define DRV_NAME "ks8842" | |
31 | ||
32 | /* Timberdale specific Registers */ | |
33 | #define REG_TIMB_RST 0x1c | |
34 | ||
35 | /* KS8842 registers */ | |
36 | ||
37 | #define REG_SELECT_BANK 0x0e | |
38 | ||
39 | /* bank 0 registers */ | |
40 | #define REG_QRFCR 0x04 | |
41 | ||
42 | /* bank 2 registers */ | |
43 | #define REG_MARL 0x00 | |
44 | #define REG_MARM 0x02 | |
45 | #define REG_MARH 0x04 | |
46 | ||
47 | /* bank 3 registers */ | |
48 | #define REG_GRR 0x06 | |
49 | ||
50 | /* bank 16 registers */ | |
51 | #define REG_TXCR 0x00 | |
52 | #define REG_TXSR 0x02 | |
53 | #define REG_RXCR 0x04 | |
54 | #define REG_TXMIR 0x08 | |
55 | #define REG_RXMIR 0x0A | |
56 | ||
57 | /* bank 17 registers */ | |
58 | #define REG_TXQCR 0x00 | |
59 | #define REG_RXQCR 0x02 | |
60 | #define REG_TXFDPR 0x04 | |
61 | #define REG_RXFDPR 0x06 | |
62 | #define REG_QMU_DATA_LO 0x08 | |
63 | #define REG_QMU_DATA_HI 0x0A | |
64 | ||
65 | /* bank 18 registers */ | |
66 | #define REG_IER 0x00 | |
67 | #define IRQ_LINK_CHANGE 0x8000 | |
68 | #define IRQ_TX 0x4000 | |
69 | #define IRQ_RX 0x2000 | |
70 | #define IRQ_RX_OVERRUN 0x0800 | |
71 | #define IRQ_TX_STOPPED 0x0200 | |
72 | #define IRQ_RX_STOPPED 0x0100 | |
73 | #define IRQ_RX_ERROR 0x0080 | |
74 | #define ENABLED_IRQS (IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \ | |
75 | IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR) | |
76 | #define REG_ISR 0x02 | |
77 | #define REG_RXSR 0x04 | |
78 | #define RXSR_VALID 0x8000 | |
79 | #define RXSR_BROADCAST 0x80 | |
80 | #define RXSR_MULTICAST 0x40 | |
81 | #define RXSR_UNICAST 0x20 | |
82 | #define RXSR_FRAMETYPE 0x08 | |
83 | #define RXSR_TOO_LONG 0x04 | |
84 | #define RXSR_RUNT 0x02 | |
85 | #define RXSR_CRC_ERROR 0x01 | |
86 | #define RXSR_ERROR (RXSR_TOO_LONG | RXSR_RUNT | RXSR_CRC_ERROR) | |
87 | ||
88 | /* bank 32 registers */ | |
89 | #define REG_SW_ID_AND_ENABLE 0x00 | |
90 | #define REG_SGCR1 0x02 | |
91 | #define REG_SGCR2 0x04 | |
92 | #define REG_SGCR3 0x06 | |
93 | ||
94 | /* bank 39 registers */ | |
95 | #define REG_MACAR1 0x00 | |
96 | #define REG_MACAR2 0x02 | |
97 | #define REG_MACAR3 0x04 | |
98 | ||
99 | /* bank 45 registers */ | |
100 | #define REG_P1MBCR 0x00 | |
101 | #define REG_P1MBSR 0x02 | |
102 | ||
103 | /* bank 46 registers */ | |
104 | #define REG_P2MBCR 0x00 | |
105 | #define REG_P2MBSR 0x02 | |
106 | ||
107 | /* bank 48 registers */ | |
108 | #define REG_P1CR2 0x02 | |
109 | ||
110 | /* bank 49 registers */ | |
111 | #define REG_P1CR4 0x02 | |
112 | #define REG_P1SR 0x04 | |
113 | ||
114 | struct ks8842_adapter { | |
115 | void __iomem *hw_addr; | |
116 | int irq; | |
117 | struct tasklet_struct tasklet; | |
118 | spinlock_t lock; /* spinlock to be interrupt safe */ | |
119 | struct platform_device *pdev; | |
120 | }; | |
121 | ||
122 | static inline void ks8842_select_bank(struct ks8842_adapter *adapter, u16 bank) | |
123 | { | |
124 | iowrite16(bank, adapter->hw_addr + REG_SELECT_BANK); | |
125 | } | |
126 | ||
127 | static inline void ks8842_write8(struct ks8842_adapter *adapter, u16 bank, | |
128 | u8 value, int offset) | |
129 | { | |
130 | ks8842_select_bank(adapter, bank); | |
131 | iowrite8(value, adapter->hw_addr + offset); | |
132 | } | |
133 | ||
134 | static inline void ks8842_write16(struct ks8842_adapter *adapter, u16 bank, | |
135 | u16 value, int offset) | |
136 | { | |
137 | ks8842_select_bank(adapter, bank); | |
138 | iowrite16(value, adapter->hw_addr + offset); | |
139 | } | |
140 | ||
141 | static inline void ks8842_enable_bits(struct ks8842_adapter *adapter, u16 bank, | |
142 | u16 bits, int offset) | |
143 | { | |
144 | u16 reg; | |
145 | ks8842_select_bank(adapter, bank); | |
146 | reg = ioread16(adapter->hw_addr + offset); | |
147 | reg |= bits; | |
148 | iowrite16(reg, adapter->hw_addr + offset); | |
149 | } | |
150 | ||
151 | static inline void ks8842_clear_bits(struct ks8842_adapter *adapter, u16 bank, | |
152 | u16 bits, int offset) | |
153 | { | |
154 | u16 reg; | |
155 | ks8842_select_bank(adapter, bank); | |
156 | reg = ioread16(adapter->hw_addr + offset); | |
157 | reg &= ~bits; | |
158 | iowrite16(reg, adapter->hw_addr + offset); | |
159 | } | |
160 | ||
161 | static inline void ks8842_write32(struct ks8842_adapter *adapter, u16 bank, | |
162 | u32 value, int offset) | |
163 | { | |
164 | ks8842_select_bank(adapter, bank); | |
165 | iowrite32(value, adapter->hw_addr + offset); | |
166 | } | |
167 | ||
168 | static inline u8 ks8842_read8(struct ks8842_adapter *adapter, u16 bank, | |
169 | int offset) | |
170 | { | |
171 | ks8842_select_bank(adapter, bank); | |
172 | return ioread8(adapter->hw_addr + offset); | |
173 | } | |
174 | ||
175 | static inline u16 ks8842_read16(struct ks8842_adapter *adapter, u16 bank, | |
176 | int offset) | |
177 | { | |
178 | ks8842_select_bank(adapter, bank); | |
179 | return ioread16(adapter->hw_addr + offset); | |
180 | } | |
181 | ||
182 | static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank, | |
183 | int offset) | |
184 | { | |
185 | ks8842_select_bank(adapter, bank); | |
186 | return ioread32(adapter->hw_addr + offset); | |
187 | } | |
188 | ||
189 | static void ks8842_reset(struct ks8842_adapter *adapter) | |
190 | { | |
191 | /* The KS8842 goes haywire when doing softare reset | |
192 | * a work around in the timberdale IP is implemented to | |
193 | * do a hardware reset instead | |
194 | ks8842_write16(adapter, 3, 1, REG_GRR); | |
195 | msleep(10); | |
196 | iowrite16(0, adapter->hw_addr + REG_GRR); | |
197 | */ | |
198 | iowrite16(32, adapter->hw_addr + REG_SELECT_BANK); | |
199 | iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST); | |
200 | msleep(20); | |
201 | } | |
202 | ||
203 | static void ks8842_update_link_status(struct net_device *netdev, | |
204 | struct ks8842_adapter *adapter) | |
205 | { | |
206 | /* check the status of the link */ | |
207 | if (ks8842_read16(adapter, 45, REG_P1MBSR) & 0x4) { | |
208 | netif_carrier_on(netdev); | |
209 | netif_wake_queue(netdev); | |
210 | } else { | |
211 | netif_stop_queue(netdev); | |
212 | netif_carrier_off(netdev); | |
213 | } | |
214 | } | |
215 | ||
216 | static void ks8842_enable_tx(struct ks8842_adapter *adapter) | |
217 | { | |
218 | ks8842_enable_bits(adapter, 16, 0x01, REG_TXCR); | |
219 | } | |
220 | ||
221 | static void ks8842_disable_tx(struct ks8842_adapter *adapter) | |
222 | { | |
223 | ks8842_clear_bits(adapter, 16, 0x01, REG_TXCR); | |
224 | } | |
225 | ||
226 | static void ks8842_enable_rx(struct ks8842_adapter *adapter) | |
227 | { | |
228 | ks8842_enable_bits(adapter, 16, 0x01, REG_RXCR); | |
229 | } | |
230 | ||
231 | static void ks8842_disable_rx(struct ks8842_adapter *adapter) | |
232 | { | |
233 | ks8842_clear_bits(adapter, 16, 0x01, REG_RXCR); | |
234 | } | |
235 | ||
236 | static void ks8842_reset_hw(struct ks8842_adapter *adapter) | |
237 | { | |
238 | /* reset the HW */ | |
239 | ks8842_reset(adapter); | |
240 | ||
241 | /* Enable QMU Transmit flow control / transmit padding / Transmit CRC */ | |
242 | ks8842_write16(adapter, 16, 0x000E, REG_TXCR); | |
243 | ||
244 | /* enable the receiver, uni + multi + broadcast + flow ctrl | |
245 | + crc strip */ | |
246 | ks8842_write16(adapter, 16, 0x8 | 0x20 | 0x40 | 0x80 | 0x400, | |
247 | REG_RXCR); | |
248 | ||
249 | /* TX frame pointer autoincrement */ | |
250 | ks8842_write16(adapter, 17, 0x4000, REG_TXFDPR); | |
251 | ||
252 | /* RX frame pointer autoincrement */ | |
253 | ks8842_write16(adapter, 17, 0x4000, REG_RXFDPR); | |
254 | ||
255 | /* RX 2 kb high watermark */ | |
256 | ks8842_write16(adapter, 0, 0x1000, REG_QRFCR); | |
257 | ||
258 | /* aggresive back off in half duplex */ | |
259 | ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1); | |
260 | ||
261 | /* enable no excessive collison drop */ | |
262 | ks8842_enable_bits(adapter, 32, 1 << 3, REG_SGCR2); | |
263 | ||
264 | /* Enable port 1 force flow control / back pressure / transmit / recv */ | |
265 | ks8842_write16(adapter, 48, 0x1E07, REG_P1CR2); | |
266 | ||
267 | /* restart port auto-negotiation */ | |
268 | ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4); | |
269 | /* only advertise 10Mbps */ | |
270 | ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4); | |
271 | ||
272 | /* Enable the transmitter */ | |
273 | ks8842_enable_tx(adapter); | |
274 | ||
275 | /* Enable the receiver */ | |
276 | ks8842_enable_rx(adapter); | |
277 | ||
278 | /* clear all interrupts */ | |
279 | ks8842_write16(adapter, 18, 0xffff, REG_ISR); | |
280 | ||
281 | /* enable interrupts */ | |
282 | ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER); | |
283 | ||
284 | /* enable the switch */ | |
285 | ks8842_write16(adapter, 32, 0x1, REG_SW_ID_AND_ENABLE); | |
286 | } | |
287 | ||
288 | static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest) | |
289 | { | |
290 | int i; | |
291 | u16 mac; | |
292 | ||
293 | for (i = 0; i < ETH_ALEN; i++) | |
294 | dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i); | |
295 | ||
296 | /* make sure the switch port uses the same MAC as the QMU */ | |
297 | mac = ks8842_read16(adapter, 2, REG_MARL); | |
298 | ks8842_write16(adapter, 39, mac, REG_MACAR1); | |
299 | mac = ks8842_read16(adapter, 2, REG_MARM); | |
300 | ks8842_write16(adapter, 39, mac, REG_MACAR2); | |
301 | mac = ks8842_read16(adapter, 2, REG_MARH); | |
302 | ks8842_write16(adapter, 39, mac, REG_MACAR3); | |
303 | } | |
304 | ||
305 | static inline u16 ks8842_tx_fifo_space(struct ks8842_adapter *adapter) | |
306 | { | |
307 | return ks8842_read16(adapter, 16, REG_TXMIR) & 0x1fff; | |
308 | } | |
309 | ||
310 | static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev) | |
311 | { | |
312 | struct ks8842_adapter *adapter = netdev_priv(netdev); | |
313 | int len = skb->len; | |
314 | u32 *ptr = (u32 *)skb->data; | |
315 | u32 ctrl; | |
316 | ||
317 | dev_dbg(&adapter->pdev->dev, | |
318 | "%s: len %u head %p data %p tail %p end %p\n", | |
319 | __func__, skb->len, skb->head, skb->data, | |
320 | skb_tail_pointer(skb), skb_end_pointer(skb)); | |
321 | ||
322 | /* check FIFO buffer space, we need space for CRC and command bits */ | |
323 | if (ks8842_tx_fifo_space(adapter) < len + 8) | |
324 | return NETDEV_TX_BUSY; | |
325 | ||
326 | /* the control word, enable IRQ, port 1 and the length */ | |
327 | ctrl = 0x8000 | 0x100 | (len << 16); | |
328 | ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO); | |
329 | ||
330 | netdev->stats.tx_bytes += len; | |
331 | ||
332 | /* copy buffer */ | |
333 | while (len > 0) { | |
334 | iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO); | |
335 | len -= sizeof(u32); | |
336 | ptr++; | |
337 | } | |
338 | ||
339 | /* enqueue packet */ | |
340 | ks8842_write16(adapter, 17, 1, REG_TXQCR); | |
341 | ||
342 | dev_kfree_skb(skb); | |
343 | ||
344 | return NETDEV_TX_OK; | |
345 | } | |
346 | ||
347 | static void ks8842_rx_frame(struct net_device *netdev, | |
348 | struct ks8842_adapter *adapter) | |
349 | { | |
350 | u32 status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO); | |
351 | int len = (status >> 16) & 0x7ff; | |
352 | ||
353 | status &= 0xffff; | |
354 | ||
355 | dev_dbg(&adapter->pdev->dev, "%s - rx_data: status: %x\n", | |
356 | __func__, status); | |
357 | ||
358 | /* check the status */ | |
359 | if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) { | |
360 | struct sk_buff *skb = netdev_alloc_skb(netdev, len + 2); | |
361 | ||
362 | dev_dbg(&adapter->pdev->dev, "%s, got package, len: %d\n", | |
363 | __func__, len); | |
364 | if (skb) { | |
365 | u32 *data; | |
366 | ||
367 | netdev->stats.rx_packets++; | |
368 | netdev->stats.rx_bytes += len; | |
369 | if (status & RXSR_MULTICAST) | |
370 | netdev->stats.multicast++; | |
371 | ||
372 | /* Align socket buffer in 4-byte boundary for | |
373 | better performance. */ | |
374 | skb_reserve(skb, 2); | |
375 | data = (u32 *)skb_put(skb, len); | |
376 | ||
377 | ks8842_select_bank(adapter, 17); | |
378 | while (len > 0) { | |
379 | *data++ = ioread32(adapter->hw_addr + | |
380 | REG_QMU_DATA_LO); | |
381 | len -= sizeof(u32); | |
382 | } | |
383 | ||
384 | skb->protocol = eth_type_trans(skb, netdev); | |
385 | netif_rx(skb); | |
386 | } else | |
387 | netdev->stats.rx_dropped++; | |
388 | } else { | |
389 | dev_dbg(&adapter->pdev->dev, "RX error, status: %x\n", status); | |
390 | netdev->stats.rx_errors++; | |
391 | if (status & RXSR_TOO_LONG) | |
392 | netdev->stats.rx_length_errors++; | |
393 | if (status & RXSR_CRC_ERROR) | |
394 | netdev->stats.rx_crc_errors++; | |
395 | if (status & RXSR_RUNT) | |
396 | netdev->stats.rx_frame_errors++; | |
397 | } | |
398 | ||
399 | /* set high watermark to 3K */ | |
400 | ks8842_clear_bits(adapter, 0, 1 << 12, REG_QRFCR); | |
401 | ||
402 | /* release the frame */ | |
403 | ks8842_write16(adapter, 17, 0x01, REG_RXQCR); | |
404 | ||
405 | /* set high watermark to 2K */ | |
406 | ks8842_enable_bits(adapter, 0, 1 << 12, REG_QRFCR); | |
407 | } | |
408 | ||
409 | void ks8842_handle_rx(struct net_device *netdev, struct ks8842_adapter *adapter) | |
410 | { | |
411 | u16 rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff; | |
412 | dev_dbg(&adapter->pdev->dev, "%s Entry - rx_data: %d\n", | |
413 | __func__, rx_data); | |
414 | while (rx_data) { | |
415 | ks8842_rx_frame(netdev, adapter); | |
416 | rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff; | |
417 | } | |
418 | } | |
419 | ||
420 | void ks8842_handle_tx(struct net_device *netdev, struct ks8842_adapter *adapter) | |
421 | { | |
422 | u16 sr = ks8842_read16(adapter, 16, REG_TXSR); | |
423 | dev_dbg(&adapter->pdev->dev, "%s - entry, sr: %x\n", __func__, sr); | |
424 | netdev->stats.tx_packets++; | |
425 | if (netif_queue_stopped(netdev)) | |
426 | netif_wake_queue(netdev); | |
427 | } | |
428 | ||
429 | void ks8842_handle_rx_overrun(struct net_device *netdev, | |
430 | struct ks8842_adapter *adapter) | |
431 | { | |
432 | dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__); | |
433 | netdev->stats.rx_errors++; | |
434 | netdev->stats.rx_fifo_errors++; | |
435 | } | |
436 | ||
437 | void ks8842_tasklet(unsigned long arg) | |
438 | { | |
439 | struct net_device *netdev = (struct net_device *)arg; | |
440 | struct ks8842_adapter *adapter = netdev_priv(netdev); | |
441 | u16 isr; | |
442 | unsigned long flags; | |
443 | u16 entry_bank; | |
444 | ||
445 | /* read current bank to be able to set it back */ | |
446 | spin_lock_irqsave(&adapter->lock, flags); | |
447 | entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK); | |
448 | spin_unlock_irqrestore(&adapter->lock, flags); | |
449 | ||
450 | isr = ks8842_read16(adapter, 18, REG_ISR); | |
451 | dev_dbg(&adapter->pdev->dev, "%s - ISR: 0x%x\n", __func__, isr); | |
452 | ||
453 | /* Ack */ | |
454 | ks8842_write16(adapter, 18, isr, REG_ISR); | |
455 | ||
456 | if (!netif_running(netdev)) | |
457 | return; | |
458 | ||
459 | if (isr & IRQ_LINK_CHANGE) | |
460 | ks8842_update_link_status(netdev, adapter); | |
461 | ||
462 | if (isr & (IRQ_RX | IRQ_RX_ERROR)) | |
463 | ks8842_handle_rx(netdev, adapter); | |
464 | ||
465 | if (isr & IRQ_TX) | |
466 | ks8842_handle_tx(netdev, adapter); | |
467 | ||
468 | if (isr & IRQ_RX_OVERRUN) | |
469 | ks8842_handle_rx_overrun(netdev, adapter); | |
470 | ||
471 | if (isr & IRQ_TX_STOPPED) { | |
472 | ks8842_disable_tx(adapter); | |
473 | ks8842_enable_tx(adapter); | |
474 | } | |
475 | ||
476 | if (isr & IRQ_RX_STOPPED) { | |
477 | ks8842_disable_rx(adapter); | |
478 | ks8842_enable_rx(adapter); | |
479 | } | |
480 | ||
481 | /* re-enable interrupts, put back the bank selection register */ | |
482 | spin_lock_irqsave(&adapter->lock, flags); | |
483 | ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER); | |
484 | iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK); | |
485 | spin_unlock_irqrestore(&adapter->lock, flags); | |
486 | } | |
487 | ||
488 | static irqreturn_t ks8842_irq(int irq, void *devid) | |
489 | { | |
490 | struct ks8842_adapter *adapter = devid; | |
491 | u16 isr; | |
492 | u16 entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK); | |
493 | irqreturn_t ret = IRQ_NONE; | |
494 | ||
495 | isr = ks8842_read16(adapter, 18, REG_ISR); | |
496 | dev_dbg(&adapter->pdev->dev, "%s - ISR: 0x%x\n", __func__, isr); | |
497 | ||
498 | if (isr) { | |
499 | /* disable IRQ */ | |
500 | ks8842_write16(adapter, 18, 0x00, REG_IER); | |
501 | ||
502 | /* schedule tasklet */ | |
503 | tasklet_schedule(&adapter->tasklet); | |
504 | ||
505 | ret = IRQ_HANDLED; | |
506 | } | |
507 | ||
508 | iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK); | |
509 | ||
510 | return ret; | |
511 | } | |
512 | ||
513 | ||
514 | /* Netdevice operations */ | |
515 | ||
516 | static int ks8842_open(struct net_device *netdev) | |
517 | { | |
518 | struct ks8842_adapter *adapter = netdev_priv(netdev); | |
519 | int err; | |
520 | ||
521 | dev_dbg(&adapter->pdev->dev, "%s - entry\n", __func__); | |
522 | ||
523 | /* reset the HW */ | |
524 | ks8842_reset_hw(adapter); | |
525 | ||
526 | ks8842_update_link_status(netdev, adapter); | |
527 | ||
528 | err = request_irq(adapter->irq, ks8842_irq, IRQF_SHARED, DRV_NAME, | |
529 | adapter); | |
530 | if (err) { | |
531 | printk(KERN_ERR "Failed to request IRQ: %d: %d\n", | |
532 | adapter->irq, err); | |
533 | return err; | |
534 | } | |
535 | ||
536 | return 0; | |
537 | } | |
538 | ||
539 | static int ks8842_close(struct net_device *netdev) | |
540 | { | |
541 | struct ks8842_adapter *adapter = netdev_priv(netdev); | |
542 | ||
543 | dev_dbg(&adapter->pdev->dev, "%s - entry\n", __func__); | |
544 | ||
545 | /* free the irq */ | |
546 | free_irq(adapter->irq, adapter); | |
547 | ||
548 | /* disable the switch */ | |
549 | ks8842_write16(adapter, 32, 0x0, REG_SW_ID_AND_ENABLE); | |
550 | ||
551 | return 0; | |
552 | } | |
553 | ||
61357325 SH |
554 | static netdev_tx_t ks8842_xmit_frame(struct sk_buff *skb, |
555 | struct net_device *netdev) | |
\9aöjfors, 2009-06-04 03:35:55 +0000" rowspan="66">b07878e5 R |
556 | { |
557 | int ret; | |
558 | struct ks8842_adapter *adapter = netdev_priv(netdev); | |
559 | ||
560 | dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__); | |
561 | ||
562 | ret = ks8842_tx_frame(skb, netdev); | |
563 | ||
564 | if (ks8842_tx_fifo_space(adapter) < netdev->mtu + 8) | |
565 | netif_stop_queue(netdev); | |
566 | ||
567 | return ret; | |
568 | } | |
569 | ||
570 | static int ks8842_set_mac(struct net_device *netdev, void *p) | |
571 | { | |
572 | struct ks8842_adapter *adapter = netdev_priv(netdev); | |
573 | unsigned long flags; | |
574 | struct sockaddr *addr = p; | |
575 | char *mac = (u8 *)addr->sa_data; | |
576 | int i; | |
577 | ||
578 | dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__); | |
579 | ||
580 | if (!is_valid_ether_addr(addr->sa_data)) | |
581 | return -EADDRNOTAVAIL; | |
582 | ||
583 | memcpy(netdev->dev_addr, mac, netdev->addr_len); | |
584 | ||
585 | spin_lock_irqsave(&adapter->lock, flags); | |
586 | for (i = 0; i < ETH_ALEN; i++) { | |
587 | ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i); | |
588 | ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1], | |
589 | REG_MACAR1 + i); | |
590 | } | |
591 | spin_unlock_irqrestore(&adapter->lock, flags); | |
592 | return 0; | |
593 | } | |
594 | ||
595 | static void ks8842_tx_timeout(struct net_device *netdev) | |
596 | { | |
597 | struct ks8842_adapter *adapter = netdev_priv(netdev); | |
598 | unsigned long flags; | |
599 | ||
600 | dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__); | |
601 | ||
602 | spin_lock_irqsave(&adapter->lock, flags); | |
603 | /* disable interrupts */ | |
604 | ks8842_write16(adapter, 18, 0, REG_IER); | |
605 | ks8842_write16(adapter, 18, 0xFFFF, REG_ISR); | |
606 | spin_unlock_irqrestore(&adapter->lock, flags); | |
607 | ||
608 | ks8842_reset_hw(adapter); | |
609 | ||
610 | ks8842_update_link_status(netdev, adapter); | |
611 | } | |
612 | ||
613 | static const struct net_device_ops ks8842_netdev_ops = { | |
614 | .ndo_open = ks8842_open, | |
615 | .ndo_stop = ks8842_close, | |
616 | .ndo_start_xmit = ks8842_xmit_frame, | |
617 | .ndo_set_mac_address = ks8842_set_mac, | |
618 | .ndo_tx_timeout = ks8842_tx_timeout, | |
619 | .ndo_validate_addr = eth_validate_addr | |
620 | }; | |
621 | ||
0fc0b732 | 622 | static const struct ethtool_ops ks8842_ethtool_ops = { |
\9aöjfors, 2009-06-04 03:35:55 +0000" rowspan="111">b07878e5 R |
623 | .get_link = ethtool_op_get_link, |
624 | }; | |
625 | ||
626 | static int __devinit ks8842_probe(struct platform_device *pdev) | |
627 | { | |
628 | int err = -ENOMEM; | |
629 | struct resource *iomem; | |
630 | struct net_device *netdev; | |
631 | struct ks8842_adapter *adapter; | |
632 | u16 id; | |
633 | ||
634 | iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
635 | if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME)) | |
636 | goto err_mem_region; | |
637 | ||
638 | netdev = alloc_etherdev(sizeof(struct ks8842_adapter)); | |
639 | if (!netdev) | |
640 | goto err_alloc_etherdev; | |
641 | ||
642 | SET_NETDEV_DEV(netdev, &pdev->dev); | |
643 | ||
644 | adapter = netdev_priv(netdev); | |
645 | adapter->hw_addr = ioremap(iomem->start, resource_size(iomem)); | |
646 | if (!adapter->hw_addr) | |
647 | goto err_ioremap; | |
648 | ||
649 | adapter->irq = platform_get_irq(pdev, 0); | |
650 | if (adapter->irq < 0) { | |
651 | err = adapter->irq; | |
652 | goto err_get_irq; | |
653 | } | |
654 | ||
655 | adapter->pdev = pdev; | |
656 | ||
657 | tasklet_init(&adapter->tasklet, ks8842_tasklet, (unsigned long)netdev); | |
658 | spin_lock_init(&adapter->lock); | |
659 | ||
660 | netdev->netdev_ops = &ks8842_netdev_ops; | |
661 | netdev->ethtool_ops = &ks8842_ethtool_ops; | |
662 | ||
663 | ks8842_read_mac_addr(adapter, netdev->dev_addr); | |
664 | ||
665 | id = ks8842_read16(adapter, 32, REG_SW_ID_AND_ENABLE); | |
666 | ||
667 | strcpy(netdev->name, "eth%d"); | |
668 | err = register_netdev(netdev); | |
669 | if (err) | |
670 | goto err_register; | |
671 | ||
672 | platform_set_drvdata(pdev, netdev); | |
673 | ||
674 | printk(KERN_INFO DRV_NAME | |
675 | " Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n", | |
676 | (id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7); | |
677 | ||
678 | return 0; | |
679 | ||
680 | err_register: | |
681 | err_get_irq: | |
682 | iounmap(adapter->hw_addr); | |
683 | err_ioremap: | |
684 | free_netdev(netdev); | |
685 | err_alloc_etherdev: | |
686 | release_mem_region(iomem->start, resource_size(iomem)); | |
687 | err_mem_region: | |
688 | return err; | |
689 | } | |
690 | ||
691 | static int __devexit ks8842_remove(struct platform_device *pdev) | |
692 | { | |
693 | struct net_device *netdev = platform_get_drvdata(pdev); | |
694 | struct ks8842_adapter *adapter = netdev_priv(netdev); | |
695 | struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
696 | ||
697 | unregister_netdev(netdev); | |
698 | tasklet_kill(&adapter->tasklet); | |
699 | iounmap(adapter->hw_addr); | |
700 | free_netdev(netdev); | |
701 | release_mem_region(iomem->start, resource_size(iomem)); | |
702 | platform_set_drvdata(pdev, NULL); | |
703 | return 0; | |
704 | } | |
705 | ||
706 | ||
707 | static struct platform_driver ks8842_platform_driver = { | |
708 | .driver = { | |
709 | .name = DRV_NAME, | |
710 | .owner = THIS_MODULE, | |
711 | }, | |
712 | .probe = ks8842_probe, | |
713 | .remove = ks8842_remove, | |
714 | }; | |
715 | ||
716 | static int __init ks8842_init(void) | |
717 | { | |
718 | return platform_driver_register(&ks8842_platform_driver); | |
719 | } | |
720 | ||
721 | static void __exit ks8842_exit(void) | |
722 | { | |
723 | platform_driver_unregister(&ks8842_platform_driver); | |
724 | } | |
725 | ||
726 | module_init(ks8842_init); | |
727 | module_exit(ks8842_exit); | |
728 | ||
729 | MODULE_DESCRIPTION("Timberdale KS8842 ethernet driver"); | |
730 | MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>"); | |
731 | MODULE_LICENSE("GPL v2"); | |
732 | MODULE_ALIAS("platform:ks8842"); | |
733 |