Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /********************************************************************* |
1da177e4 LT |
2 | * |
3 | * Description: Driver for the SMC Infrared Communications Controller | |
1da177e4 | 4 | * Author: Daniele Peri (peri@csai.unipa.it) |
527b6af4 DT |
5 | * Created at: |
6 | * Modified at: | |
7 | * Modified by: | |
8 | * | |
1da177e4 LT |
9 | * Copyright (c) 2002 Daniele Peri |
10 | * All Rights Reserved. | |
11 | * Copyright (c) 2002 Jean Tourrilhes | |
c1e14a6e | 12 | * Copyright (c) 2006 Linus Walleij |
1da177e4 LT |
13 | * |
14 | * | |
15 | * Based on smc-ircc.c: | |
16 | * | |
17 | * Copyright (c) 2001 Stefani Seibold | |
18 | * Copyright (c) 1999-2001 Dag Brattli | |
527b6af4 | 19 | * Copyright (c) 1998-1999 Thomas Davis, |
1da177e4 LT |
20 | * |
21 | * and irport.c: | |
22 | * | |
23 | * Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved. | |
24 | * | |
527b6af4 DT |
25 | * |
26 | * This program is free software; you can redistribute it and/or | |
27 | * modify it under the terms of the GNU General Public License as | |
28 | * published by the Free Software Foundation; either version 2 of | |
1da177e4 | 29 | * the License, or (at your option) any later version. |
527b6af4 | 30 | * |
1da177e4 LT |
31 | * This program is distributed in the hope that it will be useful, |
32 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
33 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
34 | * GNU General Public License for more details. | |
527b6af4 DT |
35 | * |
36 | * You should have received a copy of the GNU General Public License | |
37 | * along with this program; if not, write to the Free Software | |
38 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
1da177e4 LT |
39 | * MA 02111-1307 USA |
40 | * | |
41 | ********************************************************************/ | |
42 | ||
43 | #include <linux/module.h> | |
44 | #include <linux/kernel.h> | |
45 | #include <linux/types.h> | |
46 | #include <linux/skbuff.h> | |
47 | #include <linux/netdevice.h> | |
48 | #include <linux/ioport.h> | |
49 | #include <linux/delay.h> | |
1da177e4 | 50 | #include <linux/init.h> |
a6b7a407 | 51 | #include <linux/interrupt.h> |
1da177e4 LT |
52 | #include <linux/rtnetlink.h> |
53 | #include <linux/serial_reg.h> | |
54 | #include <linux/dma-mapping.h> | |
d94c77b9 | 55 | #include <linux/pnp.h> |
d052d1be | 56 | #include <linux/platform_device.h> |
5a0e3ad6 | 57 | #include <linux/gfp.h> |
1da177e4 LT |
58 | |
59 | #include <asm/io.h> | |
60 | #include <asm/dma.h> | |
61 | #include <asm/byteorder.h> | |
62 | ||
63 | #include <linux/spinlock.h> | |
64 | #include <linux/pm.h> | |
c1e14a6e LW |
65 | #ifdef CONFIG_PCI |
66 | #include <linux/pci.h> | |
67 | #endif | |
1da177e4 LT |
68 | |
69 | #include <net/irda/wrapper.h> | |
70 | #include <net/irda/irda.h> | |
71 | #include <net/irda/irda_device.h> | |
72 | ||
73 | #include "smsc-ircc2.h" | |
74 | #include "smsc-sio.h" | |
75 | ||
98b77773 DT |
76 | |
77 | MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>"); | |
78 | MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver"); | |
79 | MODULE_LICENSE("GPL"); | |
80 | ||
eb939922 | 81 | static bool smsc_nopnp = true; |
d0d4f69b | 82 | module_param_named(nopnp, smsc_nopnp, bool, 0); |
32db9276 | 83 | MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults to true"); |
d0d4f69b | 84 | |
916f11c7 BH |
85 | #define DMA_INVAL 255 |
86 | static int ircc_dma = DMA_INVAL; | |
98b77773 DT |
87 | module_param(ircc_dma, int, 0); |
88 | MODULE_PARM_DESC(ircc_dma, "DMA channel"); | |
89 | ||
916f11c7 BH |
90 | #define IRQ_INVAL 255 |
91 | static int ircc_irq = IRQ_INVAL; | |
98b77773 DT |
92 | module_param(ircc_irq, int, 0); |
93 | MODULE_PARM_DESC(ircc_irq, "IRQ line"); | |
94 | ||
95 | static int ircc_fir; | |
96 | module_param(ircc_fir, int, 0); | |
97 | MODULE_PARM_DESC(ircc_fir, "FIR Base Address"); | |
98 | ||
99 | static int ircc_sir; | |
100 | module_param(ircc_sir, int, 0); | |
101 | MODULE_PARM_DESC(ircc_sir, "SIR Base Address"); | |
102 | ||
103 | static int ircc_cfg; | |
104 | module_param(ircc_cfg, int, 0); | |
105 | MODULE_PARM_DESC(ircc_cfg, "Configuration register base address"); | |
106 | ||
107 | static int ircc_transceiver; | |
108 | module_param(ircc_transceiver, int, 0); | |
109 | MODULE_PARM_DESC(ircc_transceiver, "Transceiver type"); | |
110 | ||
1da177e4 LT |
111 | /* Types */ |
112 | ||
c1e14a6e LW |
113 | #ifdef CONFIG_PCI |
114 | struct smsc_ircc_subsystem_configuration { | |
115 | unsigned short vendor; /* PCI vendor ID */ | |
116 | unsigned short device; /* PCI vendor ID */ | |
117 | unsigned short subvendor; /* PCI subsystem vendor ID */ | |
83cf0a9b | 118 | unsigned short subdevice; /* PCI subsystem device ID */ |
c1e14a6e LW |
119 | unsigned short sir_io; /* I/O port for SIR */ |
120 | unsigned short fir_io; /* I/O port for FIR */ | |
121 | unsigned char fir_irq; /* FIR IRQ */ | |
122 | unsigned char fir_dma; /* FIR DMA */ | |
123 | unsigned short cfg_base; /* I/O port for chip configuration */ | |
124 | int (*preconfigure)(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); /* Preconfig function */ | |
125 | const char *name; /* name shown as info */ | |
126 | }; | |
127 | #endif | |
128 | ||
1da177e4 LT |
129 | struct smsc_transceiver { |
130 | char *name; | |
527b6af4 | 131 | void (*set_for_speed)(int fir_base, u32 speed); |
1da177e4 LT |
132 | int (*probe)(int fir_base); |
133 | }; | |
1da177e4 LT |
134 | |
135 | struct smsc_chip { | |
136 | char *name; | |
137 | #if 0 | |
138 | u8 type; | |
139 | #endif | |
140 | u16 flags; | |
141 | u8 devid; | |
142 | u8 rev; | |
143 | }; | |
1da177e4 LT |
144 | |
145 | struct smsc_chip_address { | |
146 | unsigned int cfg_base; | |
147 | unsigned int type; | |
148 | }; | |
1da177e4 LT |
149 | |
150 | /* Private data for each instance */ | |
151 | struct smsc_ircc_cb { | |
152 | struct net_device *netdev; /* Yes! we are some kind of netdevice */ | |
1da177e4 | 153 | struct irlap_cb *irlap; /* The link layer we are binded to */ |
527b6af4 | 154 | |
1da177e4 LT |
155 | chipio_t io; /* IrDA controller information */ |
156 | iobuff_t tx_buff; /* Transmit buffer */ | |
157 | iobuff_t rx_buff; /* Receive buffer */ | |
158 | dma_addr_t tx_buff_dma; | |
159 | dma_addr_t rx_buff_dma; | |
160 | ||
161 | struct qos_info qos; /* QoS capabilities for this device */ | |
162 | ||
163 | spinlock_t lock; /* For serializing operations */ | |
527b6af4 | 164 | |
1da177e4 LT |
165 | __u32 new_speed; |
166 | __u32 flags; /* Interface flags */ | |
167 | ||
168 | int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */ | |
169 | int tx_len; /* Number of frames in tx_buff */ | |
170 | ||
171 | int transceiver; | |
6bb3b2cd | 172 | struct platform_device *pldev; |
1da177e4 LT |
173 | }; |
174 | ||
175 | /* Constants */ | |
176 | ||
6bb3b2cd DT |
177 | #define SMSC_IRCC2_DRIVER_NAME "smsc-ircc2" |
178 | ||
1da177e4 LT |
179 | #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED 9600 |
180 | #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER 1 | |
98b77773 | 181 | #define SMSC_IRCC2_C_NET_TIMEOUT 0 |
1da177e4 LT |
182 | #define SMSC_IRCC2_C_SIR_STOP 0 |
183 | ||
6bb3b2cd DT |
184 | static const char *driver_name = SMSC_IRCC2_DRIVER_NAME; |
185 | ||
1da177e4 LT |
186 | /* Prototypes */ |
187 | ||
188 | static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq); | |
189 | static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base); | |
190 | static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq); | |
191 | static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self); | |
192 | static void smsc_ircc_init_chip(struct smsc_ircc_cb *self); | |
193 | static int __exit smsc_ircc_close(struct smsc_ircc_cb *self); | |
80a90589 DT |
194 | static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self); |
195 | static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self); | |
1da177e4 | 196 | static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self); |
6518bbb8 SH |
197 | static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb, |
198 | struct net_device *dev); | |
199 | static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb, | |
200 | struct net_device *dev); | |
80a90589 DT |
201 | static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs); |
202 | static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self); | |
0fa2f491 DT |
203 | static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed); |
204 | static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed); | |
7d12e780 | 205 | static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id); |
1da177e4 LT |
206 | static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev); |
207 | static void smsc_ircc_sir_start(struct smsc_ircc_cb *self); | |
208 | #if SMSC_IRCC2_C_SIR_STOP | |
209 | static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self); | |
210 | #endif | |
211 | static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self); | |
212 | static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len); | |
213 | static int smsc_ircc_net_open(struct net_device *dev); | |
214 | static int smsc_ircc_net_close(struct net_device *dev); | |
215 | static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
216 | #if SMSC_IRCC2_C_NET_TIMEOUT | |
217 | static void smsc_ircc_timeout(struct net_device *dev); | |
218 | #endif | |
1da177e4 LT |
219 | static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self); |
220 | static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self); | |
221 | static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed); | |
222 | static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self); | |
223 | ||
224 | /* Probing */ | |
948252cb DM |
225 | static int __init smsc_ircc_look_for_chips(void); |
226 | static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type); | |
227 | static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type); | |
228 | static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type); | |
229 | static int __init smsc_superio_fdc(unsigned short cfg_base); | |
230 | static int __init smsc_superio_lpc(unsigned short cfg_base); | |
c1e14a6e | 231 | #ifdef CONFIG_PCI |
948252cb DM |
232 | static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf); |
233 | static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); | |
234 | static void __init preconfigure_ali_port(struct pci_dev *dev, | |
08d09997 | 235 | unsigned short port); |
948252cb DM |
236 | static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); |
237 | static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, | |
c1e14a6e LW |
238 | unsigned short ircc_fir, |
239 | unsigned short ircc_sir, | |
240 | unsigned char ircc_dma, | |
241 | unsigned char ircc_irq); | |
242 | #endif | |
1da177e4 LT |
243 | |
244 | /* Transceivers specific functions */ | |
245 | ||
246 | static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed); | |
247 | static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base); | |
248 | static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed); | |
249 | static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base); | |
250 | static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed); | |
251 | static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base); | |
252 | ||
253 | /* Power Management */ | |
254 | ||
3ae5eaec RK |
255 | static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state); |
256 | static int smsc_ircc_resume(struct platform_device *dev); | |
1da177e4 | 257 | |
3ae5eaec | 258 | static struct platform_driver smsc_ircc_driver = { |
6bb3b2cd DT |
259 | .suspend = smsc_ircc_suspend, |
260 | .resume = smsc_ircc_resume, | |
3ae5eaec RK |
261 | .driver = { |
262 | .name = SMSC_IRCC2_DRIVER_NAME, | |
263 | }, | |
6bb3b2cd | 264 | }; |
1da177e4 LT |
265 | |
266 | /* Transceivers for SMSC-ircc */ | |
267 | ||
b6158d23 | 268 | static struct smsc_transceiver smsc_transceivers[] = |
1da177e4 | 269 | { |
98b77773 DT |
270 | { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 }, |
271 | { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select }, | |
272 | { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc }, | |
273 | { NULL, NULL } | |
1da177e4 | 274 | }; |
a956f4ca | 275 | #define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1) |
1da177e4 LT |
276 | |
277 | /* SMC SuperIO chipsets definitions */ | |
278 | ||
279 | #define KEY55_1 0 /* SuperIO Configuration mode with Key <0x55> */ | |
280 | #define KEY55_2 1 /* SuperIO Configuration mode with Key <0x55,0x55> */ | |
281 | #define NoIRDA 2 /* SuperIO Chip has no IRDA Port */ | |
282 | #define SIR 0 /* SuperIO Chip has only slow IRDA */ | |
283 | #define FIR 4 /* SuperIO Chip has fast IRDA */ | |
284 | #define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */ | |
285 | ||
b6158d23 | 286 | static struct smsc_chip __initdata fdc_chips_flat[] = |
1da177e4 LT |
287 | { |
288 | /* Base address 0x3f0 or 0x370 */ | |
289 | { "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip cannot be detected */ | |
290 | { "37C665GT", KEY55_2|NoIRDA, 0x65, 0x01 }, | |
291 | { "37C665GT", KEY55_2|NoIRDA, 0x66, 0x01 }, | |
292 | { "37C669", KEY55_2|SIR|SERx4, 0x03, 0x02 }, | |
293 | { "37C669", KEY55_2|SIR|SERx4, 0x04, 0x02 }, /* ID? */ | |
294 | { "37C78", KEY55_2|NoIRDA, 0x78, 0x00 }, | |
295 | { "37N769", KEY55_1|FIR|SERx4, 0x28, 0x00 }, | |
296 | { "37N869", KEY55_1|FIR|SERx4, 0x29, 0x00 }, | |
297 | { NULL } | |
298 | }; | |
299 | ||
b6158d23 | 300 | static struct smsc_chip __initdata fdc_chips_paged[] = |
1da177e4 LT |
301 | { |
302 | /* Base address 0x3f0 or 0x370 */ | |
303 | { "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 }, | |
304 | { "37B77X", KEY55_1|SIR|SERx4, 0x43, 0x00 }, | |
305 | { "37B78X", KEY55_1|SIR|SERx4, 0x44, 0x00 }, | |
306 | { "37B80X", KEY55_1|SIR|SERx4, 0x42, 0x00 }, | |
307 | { "37C67X", KEY55_1|FIR|SERx4, 0x40, 0x00 }, | |
308 | { "37C93X", KEY55_2|SIR|SERx4, 0x02, 0x01 }, | |
309 | { "37C93XAPM", KEY55_1|SIR|SERx4, 0x30, 0x01 }, | |
310 | { "37C93XFR", KEY55_2|FIR|SERx4, 0x03, 0x01 }, | |
311 | { "37M707", KEY55_1|SIR|SERx4, 0x42, 0x00 }, | |
312 | { "37M81X", KEY55_1|SIR|SERx4, 0x4d, 0x00 }, | |
313 | { "37N958FR", KEY55_1|FIR|SERx4, 0x09, 0x04 }, | |
314 | { "37N971", KEY55_1|FIR|SERx4, 0x0a, 0x00 }, | |
315 | { "37N972", KEY55_1|FIR|SERx4, 0x0b, 0x00 }, | |
316 | { NULL } | |
317 | }; | |
318 | ||
b6158d23 | 319 | static struct smsc_chip __initdata lpc_chips_flat[] = |
1da177e4 LT |
320 | { |
321 | /* Base address 0x2E or 0x4E */ | |
322 | { "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 }, | |
afdf27c9 | 323 | { "47N227", KEY55_1|FIR|SERx4, 0x7a, 0x00 }, |
1da177e4 LT |
324 | { "47N267", KEY55_1|FIR|SERx4, 0x5e, 0x00 }, |
325 | { NULL } | |
326 | }; | |
327 | ||
b6158d23 | 328 | static struct smsc_chip __initdata lpc_chips_paged[] = |
1da177e4 LT |
329 | { |
330 | /* Base address 0x2E or 0x4E */ | |
331 | { "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 }, | |
332 | { "47B37X", KEY55_1|SIR|SERx4, 0x52, 0x00 }, | |
333 | { "47M10X", KEY55_1|SIR|SERx4, 0x59, 0x00 }, | |
334 | { "47M120", KEY55_1|NoIRDA|SERx4, 0x5c, 0x00 }, | |
335 | { "47M13X", KEY55_1|SIR|SERx4, 0x59, 0x00 }, | |
336 | { "47M14X", KEY55_1|SIR|SERx4, 0x5f, 0x00 }, | |
337 | { "47N252", KEY55_1|FIR|SERx4, 0x0e, 0x00 }, | |
338 | { "47S42X", KEY55_1|SIR|SERx4, 0x57, 0x00 }, | |
339 | { NULL } | |
340 | }; | |
341 | ||
342 | #define SMSCSIO_TYPE_FDC 1 | |
343 | #define SMSCSIO_TYPE_LPC 2 | |
344 | #define SMSCSIO_TYPE_FLAT 4 | |
345 | #define SMSCSIO_TYPE_PAGED 8 | |
346 | ||
b6158d23 | 347 | static struct smsc_chip_address __initdata possible_addresses[] = |
1da177e4 | 348 | { |
98b77773 DT |
349 | { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, |
350 | { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, | |
351 | { 0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, | |
352 | { 0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, | |
353 | { 0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, | |
354 | { 0, 0 } | |
1da177e4 LT |
355 | }; |
356 | ||
357 | /* Globals */ | |
358 | ||
98b77773 DT |
359 | static struct smsc_ircc_cb *dev_self[] = { NULL, NULL }; |
360 | static unsigned short dev_count; | |
1da177e4 LT |
361 | |
362 | static inline void register_bank(int iobase, int bank) | |
363 | { | |
98b77773 DT |
364 | outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)), |
365 | iobase + IRCC_MASTER); | |
1da177e4 LT |
366 | } |
367 | ||
d94c77b9 | 368 | /* PNP hotplug support */ |
948252cb | 369 | static const struct pnp_device_id smsc_ircc_pnp_table[] = { |
d94c77b9 DB |
370 | { .id = "SMCf010", .driver_data = 0 }, |
371 | /* and presumably others */ | |
372 | { } | |
373 | }; | |
374 | MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table); | |
d0d4f69b BH |
375 | |
376 | static int pnp_driver_registered; | |
377 | ||
7a1aa309 | 378 | #ifdef CONFIG_PNP |
45ac936c | 379 | static int smsc_ircc_pnp_probe(struct pnp_dev *dev, |
1dd06ae8 | 380 | const struct pnp_device_id *dev_id) |
d0d4f69b BH |
381 | { |
382 | unsigned int firbase, sirbase; | |
383 | u8 dma, irq; | |
384 | ||
385 | if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && | |
386 | pnp_dma_valid(dev, 0) && pnp_irq_valid(dev, 0))) | |
387 | return -EINVAL; | |
388 | ||
389 | sirbase = pnp_port_start(dev, 0); | |
390 | firbase = pnp_port_start(dev, 1); | |
391 | dma = pnp_dma(dev, 0); | |
392 | irq = pnp_irq(dev, 0); | |
393 | ||
394 | if (smsc_ircc_open(firbase, sirbase, dma, irq)) | |
395 | return -ENODEV; | |
396 | ||
397 | return 0; | |
398 | } | |
399 | ||
400 | static struct pnp_driver smsc_ircc_pnp_driver = { | |
401 | .name = "smsc-ircc2", | |
402 | .id_table = smsc_ircc_pnp_table, | |
403 | .probe = smsc_ircc_pnp_probe, | |
404 | }; | |
7a1aa309 IM |
405 | #else /* CONFIG_PNP */ |
406 | static struct pnp_driver smsc_ircc_pnp_driver; | |
407 | #endif | |
1da177e4 LT |
408 | |
409 | /******************************************************************************* | |
410 | * | |
411 | * | |
412 | * SMSC-ircc stuff | |
413 | * | |
414 | * | |
415 | *******************************************************************************/ | |
416 | ||
d0d4f69b BH |
417 | static int __init smsc_ircc_legacy_probe(void) |
418 | { | |
419 | int ret = 0; | |
420 | ||
7c31d2f5 BH |
421 | #ifdef CONFIG_PCI |
422 | if (smsc_ircc_preconfigure_subsystems(ircc_cfg, ircc_fir, ircc_sir, ircc_dma, ircc_irq) < 0) { | |
423 | /* Ignore errors from preconfiguration */ | |
424 | IRDA_ERROR("%s, Preconfiguration failed !\n", driver_name); | |
425 | } | |
426 | #endif | |
427 | ||
d0d4f69b BH |
428 | if (ircc_fir > 0 && ircc_sir > 0) { |
429 | IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir); | |
430 | IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir); | |
431 | ||
432 | if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq)) | |
433 | ret = -ENODEV; | |
434 | } else { | |
435 | ret = -ENODEV; | |
436 | ||
437 | /* try user provided configuration register base address */ | |
438 | if (ircc_cfg > 0) { | |
439 | IRDA_MESSAGE(" Overriding configuration address " | |
440 | "0x%04x\n", ircc_cfg); | |
441 | if (!smsc_superio_fdc(ircc_cfg)) | |
442 | ret = 0; | |
443 | if (!smsc_superio_lpc(ircc_cfg)) | |
444 | ret = 0; | |
445 | } | |
446 | ||
447 | if (smsc_ircc_look_for_chips() > 0) | |
448 | ret = 0; | |
449 | } | |
450 | return ret; | |
451 | } | |
452 | ||
1da177e4 LT |
453 | /* |
454 | * Function smsc_ircc_init () | |
455 | * | |
456 | * Initialize chip. Just try to find out how many chips we are dealing with | |
457 | * and where they are | |
458 | */ | |
459 | static int __init smsc_ircc_init(void) | |
460 | { | |
6bb3b2cd | 461 | int ret; |
1da177e4 | 462 | |
a97a6f10 | 463 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 | 464 | |
3ae5eaec | 465 | ret = platform_driver_register(&smsc_ircc_driver); |
6bb3b2cd DT |
466 | if (ret) { |
467 | IRDA_ERROR("%s, Can't register driver!\n", driver_name); | |
468 | return ret; | |
469 | } | |
470 | ||
98b77773 | 471 | dev_count = 0; |
527b6af4 | 472 | |
d0d4f69b BH |
473 | if (smsc_nopnp || !pnp_platform_devices || |
474 | ircc_cfg || ircc_fir || ircc_sir || | |
475 | ircc_dma != DMA_INVAL || ircc_irq != IRQ_INVAL) { | |
476 | ret = smsc_ircc_legacy_probe(); | |
6bb3b2cd | 477 | } else { |
d0d4f69b BH |
478 | if (pnp_register_driver(&smsc_ircc_pnp_driver) == 0) |
479 | pnp_driver_registered = 1; | |
1da177e4 | 480 | } |
527b6af4 | 481 | |
d0d4f69b BH |
482 | if (ret) { |
483 | if (pnp_driver_registered) | |
484 | pnp_unregister_driver(&smsc_ircc_pnp_driver); | |
3ae5eaec | 485 | platform_driver_unregister(&smsc_ircc_driver); |
d0d4f69b | 486 | } |
527b6af4 | 487 | |
1da177e4 LT |
488 | return ret; |
489 | } | |
490 | ||
6518bbb8 SH |
491 | static netdev_tx_t smsc_ircc_net_xmit(struct sk_buff *skb, |
492 | struct net_device *dev) | |
02087be6 SH |
493 | { |
494 | struct smsc_ircc_cb *self = netdev_priv(dev); | |
495 | ||
496 | if (self->io.speed > 115200) | |
497 | return smsc_ircc_hard_xmit_fir(skb, dev); | |
498 | else | |
499 | return smsc_ircc_hard_xmit_sir(skb, dev); | |
500 | } | |
501 | ||
502 | static const struct net_device_ops smsc_ircc_netdev_ops = { | |
503 | .ndo_open = smsc_ircc_net_open, | |
504 | .ndo_stop = smsc_ircc_net_close, | |
505 | .ndo_do_ioctl = smsc_ircc_net_ioctl, | |
506 | .ndo_start_xmit = smsc_ircc_net_xmit, | |
507 | #if SMSC_IRCC2_C_NET_TIMEOUT | |
508 | .ndo_tx_timeout = smsc_ircc_timeout, | |
509 | #endif | |
510 | }; | |
511 | ||
1da177e4 LT |
512 | /* |
513 | * Function smsc_ircc_open (firbase, sirbase, dma, irq) | |
514 | * | |
515 | * Try to open driver instance | |
516 | * | |
517 | */ | |
45ac936c | 518 | static int smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) |
1da177e4 LT |
519 | { |
520 | struct smsc_ircc_cb *self; | |
521 | struct net_device *dev; | |
522 | int err; | |
527b6af4 | 523 | |
a97a6f10 | 524 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 LT |
525 | |
526 | err = smsc_ircc_present(fir_base, sir_base); | |
98b77773 | 527 | if (err) |
1da177e4 | 528 | goto err_out; |
527b6af4 | 529 | |
1da177e4 | 530 | err = -ENOMEM; |
a956f4ca | 531 | if (dev_count >= ARRAY_SIZE(dev_self)) { |
a97a6f10 | 532 | IRDA_WARNING("%s(), too many devices!\n", __func__); |
1da177e4 LT |
533 | goto err_out1; |
534 | } | |
535 | ||
536 | /* | |
537 | * Allocate new instance of the driver | |
538 | */ | |
539 | dev = alloc_irdadev(sizeof(struct smsc_ircc_cb)); | |
540 | if (!dev) { | |
a97a6f10 | 541 | IRDA_WARNING("%s() can't allocate net device\n", __func__); |
1da177e4 LT |
542 | goto err_out1; |
543 | } | |
544 | ||
1da177e4 | 545 | #if SMSC_IRCC2_C_NET_TIMEOUT |
98b77773 | 546 | dev->watchdog_timeo = HZ * 2; /* Allow enough time for speed change */ |
1da177e4 | 547 | #endif |
02087be6 | 548 | dev->netdev_ops = &smsc_ircc_netdev_ops; |
527b6af4 | 549 | |
da0841a0 | 550 | self = netdev_priv(dev); |
1da177e4 LT |
551 | self->netdev = dev; |
552 | ||
553 | /* Make ifconfig display some details */ | |
554 | dev->base_addr = self->io.fir_base = fir_base; | |
555 | dev->irq = self->io.irq = irq; | |
556 | ||
557 | /* Need to store self somewhere */ | |
6bb3b2cd | 558 | dev_self[dev_count] = self; |
1da177e4 LT |
559 | spin_lock_init(&self->lock); |
560 | ||
527b6af4 | 561 | self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE; |
1da177e4 LT |
562 | self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE; |
563 | ||
564 | self->rx_buff.head = | |
565 | dma_alloc_coherent(NULL, self->rx_buff.truesize, | |
1f9061d2 | 566 | &self->rx_buff_dma, GFP_KERNEL | __GFP_ZERO); |
d0320f75 | 567 | if (self->rx_buff.head == NULL) |
1da177e4 | 568 | goto err_out2; |
1da177e4 LT |
569 | |
570 | self->tx_buff.head = | |
571 | dma_alloc_coherent(NULL, self->tx_buff.truesize, | |
1f9061d2 | 572 | &self->tx_buff_dma, GFP_KERNEL | __GFP_ZERO); |
d0320f75 | 573 | if (self->tx_buff.head == NULL) |
1da177e4 | 574 | goto err_out3; |
1da177e4 | 575 | |
1da177e4 LT |
576 | self->rx_buff.in_frame = FALSE; |
577 | self->rx_buff.state = OUTSIDE_FRAME; | |
578 | self->tx_buff.data = self->tx_buff.head; | |
579 | self->rx_buff.data = self->rx_buff.head; | |
527b6af4 | 580 | |
1da177e4 | 581 | smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq); |
1da177e4 | 582 | smsc_ircc_setup_qos(self); |
1da177e4 | 583 | smsc_ircc_init_chip(self); |
527b6af4 | 584 | |
98b77773 DT |
585 | if (ircc_transceiver > 0 && |
586 | ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS) | |
1da177e4 LT |
587 | self->transceiver = ircc_transceiver; |
588 | else | |
589 | smsc_ircc_probe_transceiver(self); | |
590 | ||
591 | err = register_netdev(self->netdev); | |
98b77773 | 592 | if (err) { |
1da177e4 LT |
593 | IRDA_ERROR("%s, Network device registration failed!\n", |
594 | driver_name); | |
595 | goto err_out4; | |
596 | } | |
597 | ||
6bb3b2cd DT |
598 | self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME, |
599 | dev_count, NULL, 0); | |
600 | if (IS_ERR(self->pldev)) { | |
601 | err = PTR_ERR(self->pldev); | |
602 | goto err_out5; | |
603 | } | |
3ae5eaec | 604 | platform_set_drvdata(self->pldev, self); |
1da177e4 LT |
605 | |
606 | IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); | |
6bb3b2cd | 607 | dev_count++; |
1da177e4 LT |
608 | |
609 | return 0; | |
98b77773 | 610 | |
6bb3b2cd DT |
611 | err_out5: |
612 | unregister_netdev(self->netdev); | |
613 | ||
1da177e4 LT |
614 | err_out4: |
615 | dma_free_coherent(NULL, self->tx_buff.truesize, | |
616 | self->tx_buff.head, self->tx_buff_dma); | |
617 | err_out3: | |
618 | dma_free_coherent(NULL, self->rx_buff.truesize, | |
619 | self->rx_buff.head, self->rx_buff_dma); | |
620 | err_out2: | |
621 | free_netdev(self->netdev); | |
6bb3b2cd | 622 | dev_self[dev_count] = NULL; |
1da177e4 LT |
623 | err_out1: |
624 | release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT); | |
625 | release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT); | |
626 | err_out: | |
627 | return err; | |
628 | } | |
629 | ||
630 | /* | |
631 | * Function smsc_ircc_present(fir_base, sir_base) | |
632 | * | |
633 | * Check the smsc-ircc chip presence | |
634 | * | |
635 | */ | |
636 | static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) | |
637 | { | |
638 | unsigned char low, high, chip, config, dma, irq, version; | |
639 | ||
640 | if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT, | |
641 | driver_name)) { | |
642 | IRDA_WARNING("%s: can't get fir_base of 0x%03x\n", | |
a97a6f10 | 643 | __func__, fir_base); |
1da177e4 LT |
644 | goto out1; |
645 | } | |
646 | ||
647 | if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT, | |
648 | driver_name)) { | |
649 | IRDA_WARNING("%s: can't get sir_base of 0x%03x\n", | |
a97a6f10 | 650 | __func__, sir_base); |
1da177e4 LT |
651 | goto out2; |
652 | } | |
653 | ||
654 | register_bank(fir_base, 3); | |
655 | ||
98b77773 DT |
656 | high = inb(fir_base + IRCC_ID_HIGH); |
657 | low = inb(fir_base + IRCC_ID_LOW); | |
658 | chip = inb(fir_base + IRCC_CHIP_ID); | |
659 | version = inb(fir_base + IRCC_VERSION); | |
660 | config = inb(fir_base + IRCC_INTERFACE); | |
1da177e4 LT |
661 | dma = config & IRCC_INTERFACE_DMA_MASK; |
662 | irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; | |
663 | ||
527b6af4 | 664 | if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) { |
98b77773 | 665 | IRDA_WARNING("%s(), addr 0x%04x - no device found!\n", |
a97a6f10 | 666 | __func__, fir_base); |
1da177e4 LT |
667 | goto out3; |
668 | } | |
669 | IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, " | |
670 | "firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n", | |
671 | chip & 0x0f, version, fir_base, sir_base, dma, irq); | |
672 | ||
673 | return 0; | |
98b77773 | 674 | |
1da177e4 LT |
675 | out3: |
676 | release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT); | |
677 | out2: | |
678 | release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT); | |
679 | out1: | |
680 | return -ENODEV; | |
681 | } | |
682 | ||
683 | /* | |
684 | * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq) | |
685 | * | |
686 | * Setup I/O | |
687 | * | |
688 | */ | |
527b6af4 DT |
689 | static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, |
690 | unsigned int fir_base, unsigned int sir_base, | |
1da177e4 LT |
691 | u8 dma, u8 irq) |
692 | { | |
693 | unsigned char config, chip_dma, chip_irq; | |
694 | ||
695 | register_bank(fir_base, 3); | |
98b77773 DT |
696 | config = inb(fir_base + IRCC_INTERFACE); |
697 | chip_dma = config & IRCC_INTERFACE_DMA_MASK; | |
698 | chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; | |
1da177e4 LT |
699 | |
700 | self->io.fir_base = fir_base; | |
701 | self->io.sir_base = sir_base; | |
702 | self->io.fir_ext = SMSC_IRCC2_FIR_CHIP_IO_EXTENT; | |
703 | self->io.sir_ext = SMSC_IRCC2_SIR_CHIP_IO_EXTENT; | |
704 | self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE; | |
705 | self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED; | |
706 | ||
916f11c7 | 707 | if (irq != IRQ_INVAL) { |
1da177e4 LT |
708 | if (irq != chip_irq) |
709 | IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n", | |
710 | driver_name, chip_irq, irq); | |
711 | self->io.irq = irq; | |
98b77773 | 712 | } else |
1da177e4 | 713 | self->io.irq = chip_irq; |
527b6af4 | 714 | |
916f11c7 | 715 | if (dma != DMA_INVAL) { |
1da177e4 LT |
716 | if (dma != chip_dma) |
717 | IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n", | |
718 | driver_name, chip_dma, dma); | |
719 | self->io.dma = dma; | |
98b77773 | 720 | } else |
1da177e4 LT |
721 | self->io.dma = chip_dma; |
722 | ||
723 | } | |
724 | ||
725 | /* | |
726 | * Function smsc_ircc_setup_qos(self) | |
727 | * | |
728 | * Setup qos | |
729 | * | |
730 | */ | |
731 | static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self) | |
732 | { | |
733 | /* Initialize QoS for this device */ | |
734 | irda_init_max_qos_capabilies(&self->qos); | |
527b6af4 | 735 | |
1da177e4 LT |
736 | self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| |
737 | IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); | |
738 | ||
739 | self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME; | |
740 | self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE; | |
741 | irda_qos_bits_to_value(&self->qos); | |
742 | } | |
743 | ||
744 | /* | |
745 | * Function smsc_ircc_init_chip(self) | |
746 | * | |
747 | * Init chip | |
748 | * | |
749 | */ | |
750 | static void smsc_ircc_init_chip(struct smsc_ircc_cb *self) | |
751 | { | |
e812cb52 | 752 | int iobase = self->io.fir_base; |
1da177e4 LT |
753 | |
754 | register_bank(iobase, 0); | |
98b77773 DT |
755 | outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER); |
756 | outb(0x00, iobase + IRCC_MASTER); | |
1da177e4 LT |
757 | |
758 | register_bank(iobase, 1); | |
e812cb52 | 759 | outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A), |
98b77773 | 760 | iobase + IRCC_SCE_CFGA); |
1da177e4 LT |
761 | |
762 | #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */ | |
98b77773 DT |
763 | outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), |
764 | iobase + IRCC_SCE_CFGB); | |
527b6af4 | 765 | #else |
98b77773 DT |
766 | outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), |
767 | iobase + IRCC_SCE_CFGB); | |
527b6af4 | 768 | #endif |
98b77773 DT |
769 | (void) inb(iobase + IRCC_FIFO_THRESHOLD); |
770 | outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD); | |
527b6af4 | 771 | |
1da177e4 | 772 | register_bank(iobase, 4); |
e812cb52 | 773 | outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL); |
527b6af4 | 774 | |
1da177e4 | 775 | register_bank(iobase, 0); |
e812cb52 | 776 | outb(0, iobase + IRCC_LCR_A); |
1da177e4 LT |
777 | |
778 | smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED); | |
527b6af4 | 779 | |
1da177e4 | 780 | /* Power on device */ |
98b77773 | 781 | outb(0x00, iobase + IRCC_MASTER); |
1da177e4 LT |
782 | } |
783 | ||
784 | /* | |
785 | * Function smsc_ircc_net_ioctl (dev, rq, cmd) | |
786 | * | |
787 | * Process IOCTL commands for this device | |
788 | * | |
789 | */ | |
790 | static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
791 | { | |
792 | struct if_irda_req *irq = (struct if_irda_req *) rq; | |
793 | struct smsc_ircc_cb *self; | |
794 | unsigned long flags; | |
795 | int ret = 0; | |
796 | ||
797 | IRDA_ASSERT(dev != NULL, return -1;); | |
798 | ||
da0841a0 | 799 | self = netdev_priv(dev); |
1da177e4 LT |
800 | |
801 | IRDA_ASSERT(self != NULL, return -1;); | |
802 | ||
a97a6f10 | 803 | IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); |
527b6af4 | 804 | |
1da177e4 LT |
805 | switch (cmd) { |
806 | case SIOCSBANDWIDTH: /* Set bandwidth */ | |
807 | if (!capable(CAP_NET_ADMIN)) | |
808 | ret = -EPERM; | |
809 | else { | |
810 | /* Make sure we are the only one touching | |
811 | * self->io.speed and the hardware - Jean II */ | |
812 | spin_lock_irqsave(&self->lock, flags); | |
813 | smsc_ircc_change_speed(self, irq->ifr_baudrate); | |
814 | spin_unlock_irqrestore(&self->lock, flags); | |
815 | } | |
816 | break; | |
817 | case SIOCSMEDIABUSY: /* Set media busy */ | |
818 | if (!capable(CAP_NET_ADMIN)) { | |
819 | ret = -EPERM; | |
820 | break; | |
821 | } | |
822 | ||
823 | irda_device_set_media_busy(self->netdev, TRUE); | |
824 | break; | |
825 | case SIOCGRECEIVING: /* Check if we are receiving right now */ | |
826 | irq->ifr_receiving = smsc_ircc_is_receiving(self); | |
827 | break; | |
828 | #if 0 | |
829 | case SIOCSDTRRTS: | |
830 | if (!capable(CAP_NET_ADMIN)) { | |
831 | ret = -EPERM; | |
832 | break; | |
833 | } | |
834 | smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts); | |
835 | break; | |
836 | #endif | |
837 | default: | |
838 | ret = -EOPNOTSUPP; | |
839 | } | |
527b6af4 | 840 | |
1da177e4 LT |
841 | return ret; |
842 | } | |
843 | ||
1da177e4 LT |
844 | #if SMSC_IRCC2_C_NET_TIMEOUT |
845 | /* | |
846 | * Function smsc_ircc_timeout (struct net_device *dev) | |
847 | * | |
848 | * The networking timeout management. | |
849 | * | |
850 | */ | |
851 | ||
852 | static void smsc_ircc_timeout(struct net_device *dev) | |
853 | { | |
da0841a0 | 854 | struct smsc_ircc_cb *self = netdev_priv(dev); |
1da177e4 LT |
855 | unsigned long flags; |
856 | ||
1da177e4 LT |
857 | IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n", |
858 | dev->name, self->io.speed); | |
859 | spin_lock_irqsave(&self->lock, flags); | |
860 | smsc_ircc_sir_start(self); | |
861 | smsc_ircc_change_speed(self, self->io.speed); | |
1ae5dc34 | 862 | dev->trans_start = jiffies; /* prevent tx timeout */ |
1da177e4 LT |
863 | netif_wake_queue(dev); |
864 | spin_unlock_irqrestore(&self->lock, flags); | |
865 | } | |
866 | #endif | |
867 | ||
868 | /* | |
869 | * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev) | |
870 | * | |
871 | * Transmits the current frame until FIFO is full, then | |
872 | * waits until the next transmit interrupt, and continues until the | |
873 | * frame is transmitted. | |
874 | */ | |
6518bbb8 SH |
875 | static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb, |
876 | struct net_device *dev) | |
1da177e4 LT |
877 | { |
878 | struct smsc_ircc_cb *self; | |
879 | unsigned long flags; | |
1da177e4 LT |
880 | s32 speed; |
881 | ||
a97a6f10 | 882 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 | 883 | |
ec634fe3 | 884 | IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;); |
527b6af4 | 885 | |
da0841a0 | 886 | self = netdev_priv(dev); |
ec634fe3 | 887 | IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;); |
1da177e4 | 888 | |
1da177e4 | 889 | netif_stop_queue(dev); |
527b6af4 | 890 | |
1da177e4 LT |
891 | /* Make sure test of self->io.speed & speed change are atomic */ |
892 | spin_lock_irqsave(&self->lock, flags); | |
893 | ||
894 | /* Check if we need to change the speed */ | |
895 | speed = irda_get_next_speed(skb); | |
98b77773 | 896 | if (speed != self->io.speed && speed != -1) { |
1da177e4 LT |
897 | /* Check for empty frame */ |
898 | if (!skb->len) { | |
899 | /* | |
900 | * We send frames one by one in SIR mode (no | |
901 | * pipelining), so at this point, if we were sending | |
902 | * a previous frame, we just received the interrupt | |
903 | * telling us it is finished (UART_IIR_THRI). | |
904 | * Therefore, waiting for the transmitter to really | |
905 | * finish draining the fifo won't take too long. | |
906 | * And the interrupt handler is not expected to run. | |
907 | * - Jean II */ | |
908 | smsc_ircc_sir_wait_hw_transmitter_finish(self); | |
909 | smsc_ircc_change_speed(self, speed); | |
910 | spin_unlock_irqrestore(&self->lock, flags); | |
911 | dev_kfree_skb(skb); | |
ec634fe3 | 912 | return NETDEV_TX_OK; |
1da177e4 | 913 | } |
98b77773 | 914 | self->new_speed = speed; |
1da177e4 LT |
915 | } |
916 | ||
917 | /* Init tx buffer */ | |
918 | self->tx_buff.data = self->tx_buff.head; | |
919 | ||
920 | /* Copy skb to tx_buff while wrapping, stuffing and making CRC */ | |
527b6af4 | 921 | self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, |
1da177e4 | 922 | self->tx_buff.truesize); |
527b6af4 | 923 | |
af049081 | 924 | dev->stats.tx_bytes += self->tx_buff.len; |
1da177e4 LT |
925 | |
926 | /* Turn on transmit finished interrupt. Will fire immediately! */ | |
80a90589 | 927 | outb(UART_IER_THRI, self->io.sir_base + UART_IER); |
1da177e4 LT |
928 | |
929 | spin_unlock_irqrestore(&self->lock, flags); | |
930 | ||
931 | dev_kfree_skb(skb); | |
527b6af4 | 932 | |
ec634fe3 | 933 | return NETDEV_TX_OK; |
1da177e4 LT |
934 | } |
935 | ||
936 | /* | |
937 | * Function smsc_ircc_set_fir_speed (self, baud) | |
938 | * | |
939 | * Change the speed of the device | |
940 | * | |
941 | */ | |
942 | static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed) | |
943 | { | |
944 | int fir_base, ir_mode, ctrl, fast; | |
945 | ||
946 | IRDA_ASSERT(self != NULL, return;); | |
947 | fir_base = self->io.fir_base; | |
948 | ||
949 | self->io.speed = speed; | |
950 | ||
98b77773 | 951 | switch (speed) { |
1da177e4 | 952 | default: |
527b6af4 | 953 | case 576000: |
1da177e4 LT |
954 | ir_mode = IRCC_CFGA_IRDA_HDLC; |
955 | ctrl = IRCC_CRC; | |
956 | fast = 0; | |
a97a6f10 | 957 | IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__); |
1da177e4 LT |
958 | break; |
959 | case 1152000: | |
960 | ir_mode = IRCC_CFGA_IRDA_HDLC; | |
961 | ctrl = IRCC_1152 | IRCC_CRC; | |
962 | fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA; | |
963 | IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", | |
a97a6f10 | 964 | __func__); |
1da177e4 LT |
965 | break; |
966 | case 4000000: | |
967 | ir_mode = IRCC_CFGA_IRDA_4PPM; | |
968 | ctrl = IRCC_CRC; | |
969 | fast = IRCC_LCR_A_FAST; | |
970 | IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", | |
a97a6f10 | 971 | __func__); |
1da177e4 LT |
972 | break; |
973 | } | |
974 | #if 0 | |
975 | Now in tranceiver! | |
976 | /* This causes an interrupt */ | |
977 | register_bank(fir_base, 0); | |
98b77773 | 978 | outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast, fir_base + IRCC_LCR_A); |
1da177e4 | 979 | #endif |
527b6af4 | 980 | |
1da177e4 | 981 | register_bank(fir_base, 1); |
98b77773 | 982 | outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA); |
527b6af4 | 983 | |
1da177e4 | 984 | register_bank(fir_base, 4); |
98b77773 | 985 | outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL); |
1da177e4 LT |
986 | } |
987 | ||
988 | /* | |
989 | * Function smsc_ircc_fir_start(self) | |
990 | * | |
991 | * Change the speed of the device | |
992 | * | |
993 | */ | |
994 | static void smsc_ircc_fir_start(struct smsc_ircc_cb *self) | |
995 | { | |
996 | struct net_device *dev; | |
997 | int fir_base; | |
998 | ||
a97a6f10 | 999 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 LT |
1000 | |
1001 | IRDA_ASSERT(self != NULL, return;); | |
1002 | dev = self->netdev; | |
1003 | IRDA_ASSERT(dev != NULL, return;); | |
1004 | ||
1005 | fir_base = self->io.fir_base; | |
1006 | ||
1007 | /* Reset everything */ | |
1008 | ||
1da177e4 | 1009 | /* Clear FIFO */ |
98b77773 | 1010 | outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A); |
1da177e4 LT |
1011 | |
1012 | /* Enable interrupt */ | |
98b77773 | 1013 | /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/ |
1da177e4 LT |
1014 | |
1015 | register_bank(fir_base, 1); | |
1016 | ||
527b6af4 | 1017 | /* Select the TX/RX interface */ |
1da177e4 | 1018 | #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */ |
98b77773 DT |
1019 | outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), |
1020 | fir_base + IRCC_SCE_CFGB); | |
527b6af4 | 1021 | #else |
98b77773 DT |
1022 | outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), |
1023 | fir_base + IRCC_SCE_CFGB); | |
527b6af4 | 1024 | #endif |
98b77773 | 1025 | (void) inb(fir_base + IRCC_FIFO_THRESHOLD); |
1da177e4 LT |
1026 | |
1027 | /* Enable SCE interrupts */ | |
98b77773 | 1028 | outb(0, fir_base + IRCC_MASTER); |
1da177e4 | 1029 | register_bank(fir_base, 0); |
98b77773 DT |
1030 | outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER); |
1031 | outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER); | |
1da177e4 LT |
1032 | } |
1033 | ||
1034 | /* | |
1035 | * Function smsc_ircc_fir_stop(self, baud) | |
1036 | * | |
1037 | * Change the speed of the device | |
1038 | * | |
1039 | */ | |
1040 | static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self) | |
1041 | { | |
1042 | int fir_base; | |
1043 | ||
a97a6f10 | 1044 | IRDA_DEBUG(1, "%s\n", __func__); |
527b6af4 | 1045 | |
1da177e4 LT |
1046 | IRDA_ASSERT(self != NULL, return;); |
1047 | ||
1048 | fir_base = self->io.fir_base; | |
1049 | register_bank(fir_base, 0); | |
98b77773 DT |
1050 | /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/ |
1051 | outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B); | |
1da177e4 LT |
1052 | } |
1053 | ||
1054 | ||
1055 | /* | |
1056 | * Function smsc_ircc_change_speed(self, baud) | |
1057 | * | |
1058 | * Change the speed of the device | |
1059 | * | |
1060 | * This function *must* be called with spinlock held, because it may | |
1061 | * be called from the irq handler. - Jean II | |
1062 | */ | |
0fa2f491 | 1063 | static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed) |
1da177e4 | 1064 | { |
1da177e4 | 1065 | struct net_device *dev; |
1da177e4 | 1066 | int last_speed_was_sir; |
527b6af4 | 1067 | |
a97a6f10 | 1068 | IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed); |
1da177e4 LT |
1069 | |
1070 | IRDA_ASSERT(self != NULL, return;); | |
1071 | dev = self->netdev; | |
1da177e4 LT |
1072 | |
1073 | last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED; | |
1074 | ||
1075 | #if 0 | |
1076 | /* Temp Hack */ | |
1077 | speed= 1152000; | |
1078 | self->io.speed = speed; | |
1079 | last_speed_was_sir = 0; | |
527b6af4 | 1080 | smsc_ircc_fir_start(self); |
1da177e4 | 1081 | #endif |
527b6af4 | 1082 | |
98b77773 | 1083 | if (self->io.speed == 0) |
1da177e4 LT |
1084 | smsc_ircc_sir_start(self); |
1085 | ||
1086 | #if 0 | |
98b77773 | 1087 | if (!last_speed_was_sir) speed = self->io.speed; |
1da177e4 LT |
1088 | #endif |
1089 | ||
98b77773 DT |
1090 | if (self->io.speed != speed) |
1091 | smsc_ircc_set_transceiver_for_speed(self, speed); | |
1da177e4 LT |
1092 | |
1093 | self->io.speed = speed; | |
527b6af4 | 1094 | |
98b77773 DT |
1095 | if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) { |
1096 | if (!last_speed_was_sir) { | |
1da177e4 LT |
1097 | smsc_ircc_fir_stop(self); |
1098 | smsc_ircc_sir_start(self); | |
1099 | } | |
527b6af4 | 1100 | smsc_ircc_set_sir_speed(self, speed); |
98b77773 DT |
1101 | } else { |
1102 | if (last_speed_was_sir) { | |
527b6af4 | 1103 | #if SMSC_IRCC2_C_SIR_STOP |
1da177e4 LT |
1104 | smsc_ircc_sir_stop(self); |
1105 | #endif | |
1106 | smsc_ircc_fir_start(self); | |
1107 | } | |
1108 | smsc_ircc_set_fir_speed(self, speed); | |
1109 | ||
1110 | #if 0 | |
1111 | self->tx_buff.len = 10; | |
1112 | self->tx_buff.data = self->tx_buff.head; | |
527b6af4 | 1113 | |
80a90589 | 1114 | smsc_ircc_dma_xmit(self, 4000); |
1da177e4 LT |
1115 | #endif |
1116 | /* Be ready for incoming frames */ | |
80a90589 | 1117 | smsc_ircc_dma_receive(self); |
1da177e4 | 1118 | } |
527b6af4 | 1119 | |
1da177e4 LT |
1120 | netif_wake_queue(dev); |
1121 | } | |
1122 | ||
1123 | /* | |
1124 | * Function smsc_ircc_set_sir_speed (self, speed) | |
1125 | * | |
1126 | * Set speed of IrDA port to specified baudrate | |
1127 | * | |
1128 | */ | |
0e49e645 | 1129 | static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed) |
1da177e4 | 1130 | { |
527b6af4 | 1131 | int iobase; |
1da177e4 LT |
1132 | int fcr; /* FIFO control reg */ |
1133 | int lcr; /* Line control reg */ | |
1134 | int divisor; | |
1135 | ||
a97a6f10 | 1136 | IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed); |
1da177e4 LT |
1137 | |
1138 | IRDA_ASSERT(self != NULL, return;); | |
1139 | iobase = self->io.sir_base; | |
527b6af4 | 1140 | |
1da177e4 LT |
1141 | /* Update accounting for new speed */ |
1142 | self->io.speed = speed; | |
1143 | ||
1144 | /* Turn off interrupts */ | |
98b77773 | 1145 | outb(0, iobase + UART_IER); |
1da177e4 | 1146 | |
98b77773 | 1147 | divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed; |
527b6af4 | 1148 | |
1da177e4 LT |
1149 | fcr = UART_FCR_ENABLE_FIFO; |
1150 | ||
527b6af4 | 1151 | /* |
1da177e4 LT |
1152 | * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and |
1153 | * almost 1,7 ms at 19200 bps. At speeds above that we can just forget | |
527b6af4 | 1154 | * about this timeout since it will always be fast enough. |
1da177e4 | 1155 | */ |
98b77773 DT |
1156 | fcr |= self->io.speed < 38400 ? |
1157 | UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14; | |
527b6af4 | 1158 | |
1da177e4 LT |
1159 | /* IrDA ports use 8N1 */ |
1160 | lcr = UART_LCR_WLEN8; | |
527b6af4 | 1161 | |
98b77773 DT |
1162 | outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */ |
1163 | outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */ | |
1164 | outb(divisor >> 8, iobase + UART_DLM); | |
1165 | outb(lcr, iobase + UART_LCR); /* Set 8N1 */ | |
1166 | outb(fcr, iobase + UART_FCR); /* Enable FIFO's */ | |
1da177e4 LT |
1167 | |
1168 | /* Turn on interrups */ | |
98b77773 | 1169 | outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); |
1da177e4 | 1170 | |
a97a6f10 | 1171 | IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed); |
1da177e4 LT |
1172 | } |
1173 | ||
1174 | ||
1175 | /* | |
1176 | * Function smsc_ircc_hard_xmit_fir (skb, dev) | |
1177 | * | |
1178 | * Transmit the frame! | |
1179 | * | |
1180 | */ | |
6518bbb8 SH |
1181 | static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb, |
1182 | struct net_device *dev) | |
1da177e4 LT |
1183 | { |
1184 | struct smsc_ircc_cb *self; | |
1185 | unsigned long flags; | |
1186 | s32 speed; | |
1da177e4 LT |
1187 | int mtt; |
1188 | ||
ec634fe3 | 1189 | IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;); |
da0841a0 | 1190 | self = netdev_priv(dev); |
ec634fe3 | 1191 | IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;); |
1da177e4 | 1192 | |
1da177e4 LT |
1193 | netif_stop_queue(dev); |
1194 | ||
1195 | /* Make sure test of self->io.speed & speed change are atomic */ | |
1196 | spin_lock_irqsave(&self->lock, flags); | |
1197 | ||
1198 | /* Check if we need to change the speed after this frame */ | |
1199 | speed = irda_get_next_speed(skb); | |
98b77773 | 1200 | if (speed != self->io.speed && speed != -1) { |
1da177e4 LT |
1201 | /* Check for empty frame */ |
1202 | if (!skb->len) { | |
1203 | /* Note : you should make sure that speed changes | |
1204 | * are not going to corrupt any outgoing frame. | |
1205 | * Look at nsc-ircc for the gory details - Jean II */ | |
527b6af4 | 1206 | smsc_ircc_change_speed(self, speed); |
1da177e4 LT |
1207 | spin_unlock_irqrestore(&self->lock, flags); |
1208 | dev_kfree_skb(skb); | |
ec634fe3 | 1209 | return NETDEV_TX_OK; |
98b77773 DT |
1210 | } |
1211 | ||
1212 | self->new_speed = speed; | |
1da177e4 | 1213 | } |
527b6af4 | 1214 | |
d626f62b | 1215 | skb_copy_from_linear_data(skb, self->tx_buff.head, skb->len); |
1da177e4 LT |
1216 | |
1217 | self->tx_buff.len = skb->len; | |
1218 | self->tx_buff.data = self->tx_buff.head; | |
527b6af4 DT |
1219 | |
1220 | mtt = irda_get_mtt(skb); | |
1da177e4 LT |
1221 | if (mtt) { |
1222 | int bofs; | |
1223 | ||
527b6af4 | 1224 | /* |
1da177e4 LT |
1225 | * Compute how many BOFs (STA or PA's) we need to waste the |
1226 | * min turn time given the speed of the link. | |
1227 | */ | |
1228 | bofs = mtt * (self->io.speed / 1000) / 8000; | |
1229 | if (bofs > 4095) | |
1230 | bofs = 4095; | |
1231 | ||
80a90589 | 1232 | smsc_ircc_dma_xmit(self, bofs); |
1da177e4 LT |
1233 | } else { |
1234 | /* Transmit frame */ | |
80a90589 | 1235 | smsc_ircc_dma_xmit(self, 0); |
1da177e4 | 1236 | } |
98b77773 | 1237 | |
1da177e4 LT |
1238 | spin_unlock_irqrestore(&self->lock, flags); |
1239 | dev_kfree_skb(skb); | |
1240 | ||
ec634fe3 | 1241 | return NETDEV_TX_OK; |
1da177e4 LT |
1242 | } |
1243 | ||
1244 | /* | |
80a90589 | 1245 | * Function smsc_ircc_dma_xmit (self, bofs) |
1da177e4 LT |
1246 | * |
1247 | * Transmit data using DMA | |
1248 | * | |
1249 | */ | |
80a90589 | 1250 | static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs) |
1da177e4 | 1251 | { |
80a90589 | 1252 | int iobase = self->io.fir_base; |
1da177e4 LT |
1253 | u8 ctrl; |
1254 | ||
a97a6f10 | 1255 | IRDA_DEBUG(3, "%s\n", __func__); |
1da177e4 LT |
1256 | #if 1 |
1257 | /* Disable Rx */ | |
1258 | register_bank(iobase, 0); | |
98b77773 | 1259 | outb(0x00, iobase + IRCC_LCR_B); |
1da177e4 LT |
1260 | #endif |
1261 | register_bank(iobase, 1); | |
98b77773 DT |
1262 | outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, |
1263 | iobase + IRCC_SCE_CFGB); | |
1da177e4 LT |
1264 | |
1265 | self->io.direction = IO_XMIT; | |
1266 | ||
1267 | /* Set BOF additional count for generating the min turn time */ | |
1268 | register_bank(iobase, 4); | |
98b77773 DT |
1269 | outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO); |
1270 | ctrl = inb(iobase + IRCC_CONTROL) & 0xf0; | |
1271 | outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI); | |
1da177e4 LT |
1272 | |
1273 | /* Set max Tx frame size */ | |
98b77773 DT |
1274 | outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI); |
1275 | outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO); | |
1da177e4 LT |
1276 | |
1277 | /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/ | |
527b6af4 | 1278 | |
1da177e4 LT |
1279 | /* Enable burst mode chip Tx DMA */ |
1280 | register_bank(iobase, 1); | |
98b77773 DT |
1281 | outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | |
1282 | IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB); | |
1da177e4 LT |
1283 | |
1284 | /* Setup DMA controller (must be done after enabling chip DMA) */ | |
1285 | irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len, | |
1286 | DMA_TX_MODE); | |
1287 | ||
1288 | /* Enable interrupt */ | |
1289 | ||
1290 | register_bank(iobase, 0); | |
98b77773 DT |
1291 | outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); |
1292 | outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER); | |
527b6af4 | 1293 | |
1da177e4 | 1294 | /* Enable transmit */ |
98b77773 | 1295 | outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B); |
1da177e4 LT |
1296 | } |
1297 | ||
1298 | /* | |
1299 | * Function smsc_ircc_dma_xmit_complete (self) | |
1300 | * | |
527b6af4 | 1301 | * The transfer of a frame in finished. This function will only be called |
1da177e4 LT |
1302 | * by the interrupt handler |
1303 | * | |
1304 | */ | |
80a90589 | 1305 | static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self) |
1da177e4 | 1306 | { |
80a90589 DT |
1307 | int iobase = self->io.fir_base; |
1308 | ||
a97a6f10 | 1309 | IRDA_DEBUG(3, "%s\n", __func__); |
1da177e4 LT |
1310 | #if 0 |
1311 | /* Disable Tx */ | |
1312 | register_bank(iobase, 0); | |
98b77773 | 1313 | outb(0x00, iobase + IRCC_LCR_B); |
1da177e4 | 1314 | #endif |
80a90589 DT |
1315 | register_bank(iobase, 1); |
1316 | outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, | |
1317 | iobase + IRCC_SCE_CFGB); | |
1da177e4 LT |
1318 | |
1319 | /* Check for underrun! */ | |
1320 | register_bank(iobase, 0); | |
98b77773 | 1321 | if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) { |
af049081 SH |
1322 | self->netdev->stats.tx_errors++; |
1323 | self->netdev->stats.tx_fifo_errors++; | |
1da177e4 LT |
1324 | |
1325 | /* Reset error condition */ | |
1326 | register_bank(iobase, 0); | |
98b77773 DT |
1327 | outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER); |
1328 | outb(0x00, iobase + IRCC_MASTER); | |
1da177e4 | 1329 | } else { |
af049081 SH |
1330 | self->netdev->stats.tx_packets++; |
1331 | self->netdev->stats.tx_bytes += self->tx_buff.len; | |
1da177e4 LT |
1332 | } |
1333 | ||
1334 | /* Check if it's time to change the speed */ | |
1335 | if (self->new_speed) { | |
527b6af4 | 1336 | smsc_ircc_change_speed(self, self->new_speed); |
1da177e4 LT |
1337 | self->new_speed = 0; |
1338 | } | |
1339 | ||
1340 | netif_wake_queue(self->netdev); | |
1341 | } | |
1342 | ||
1343 | /* | |
1344 | * Function smsc_ircc_dma_receive(self) | |
1345 | * | |
1346 | * Get ready for receiving a frame. The device will initiate a DMA | |
1347 | * if it starts to receive a frame. | |
1348 | * | |
1349 | */ | |
80a90589 | 1350 | static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self) |
1da177e4 | 1351 | { |
80a90589 | 1352 | int iobase = self->io.fir_base; |
1da177e4 LT |
1353 | #if 0 |
1354 | /* Turn off chip DMA */ | |
1355 | register_bank(iobase, 1); | |
98b77773 DT |
1356 | outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, |
1357 | iobase + IRCC_SCE_CFGB); | |
1da177e4 | 1358 | #endif |
527b6af4 | 1359 | |
1da177e4 LT |
1360 | /* Disable Tx */ |
1361 | register_bank(iobase, 0); | |
98b77773 | 1362 | outb(0x00, iobase + IRCC_LCR_B); |
1da177e4 LT |
1363 | |
1364 | /* Turn off chip DMA */ | |
1365 | register_bank(iobase, 1); | |
98b77773 DT |
1366 | outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, |
1367 | iobase + IRCC_SCE_CFGB); | |
1da177e4 LT |
1368 | |
1369 | self->io.direction = IO_RECV; | |
1370 | self->rx_buff.data = self->rx_buff.head; | |
1371 | ||
1372 | /* Set max Rx frame size */ | |
1373 | register_bank(iobase, 4); | |
98b77773 DT |
1374 | outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI); |
1375 | outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO); | |
1da177e4 LT |
1376 | |
1377 | /* Setup DMA controller */ | |
1378 | irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize, | |
1379 | DMA_RX_MODE); | |
1380 | ||
1381 | /* Enable burst mode chip Rx DMA */ | |
1382 | register_bank(iobase, 1); | |
98b77773 DT |
1383 | outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | |
1384 | IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB); | |
1da177e4 LT |
1385 | |
1386 | /* Enable interrupt */ | |
1387 | register_bank(iobase, 0); | |
98b77773 DT |
1388 | outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); |
1389 | outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER); | |
1da177e4 LT |
1390 | |
1391 | /* Enable receiver */ | |
1392 | register_bank(iobase, 0); | |
527b6af4 | 1393 | outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE, |
98b77773 | 1394 | iobase + IRCC_LCR_B); |
527b6af4 | 1395 | |
1da177e4 LT |
1396 | return 0; |
1397 | } | |
1398 | ||
1399 | /* | |
80a90589 | 1400 | * Function smsc_ircc_dma_receive_complete(self) |
1da177e4 LT |
1401 | * |
1402 | * Finished with receiving frames | |
1403 | * | |
1404 | */ | |
80a90589 | 1405 | static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) |
1da177e4 LT |
1406 | { |
1407 | struct sk_buff *skb; | |
1408 | int len, msgcnt, lsr; | |
80a90589 | 1409 | int iobase = self->io.fir_base; |
527b6af4 | 1410 | |
1da177e4 | 1411 | register_bank(iobase, 0); |
527b6af4 | 1412 | |
a97a6f10 | 1413 | IRDA_DEBUG(3, "%s\n", __func__); |
1da177e4 LT |
1414 | #if 0 |
1415 | /* Disable Rx */ | |
1416 | register_bank(iobase, 0); | |
98b77773 | 1417 | outb(0x00, iobase + IRCC_LCR_B); |
1da177e4 LT |
1418 | #endif |
1419 | register_bank(iobase, 0); | |
98b77773 DT |
1420 | outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR); |
1421 | lsr= inb(iobase + IRCC_LSR); | |
1422 | msgcnt = inb(iobase + IRCC_LCR_B) & 0x08; | |
1da177e4 | 1423 | |
a97a6f10 | 1424 | IRDA_DEBUG(2, "%s: dma count = %d\n", __func__, |
1da177e4 LT |
1425 | get_dma_residue(self->io.dma)); |
1426 | ||
1427 | len = self->rx_buff.truesize - get_dma_residue(self->io.dma); | |
1428 | ||
98b77773 DT |
1429 | /* Look for errors */ |
1430 | if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) { | |
af049081 | 1431 | self->netdev->stats.rx_errors++; |
98b77773 | 1432 | if (lsr & IRCC_LSR_FRAME_ERROR) |
af049081 | 1433 | self->netdev->stats.rx_frame_errors++; |
98b77773 | 1434 | if (lsr & IRCC_LSR_CRC_ERROR) |
af049081 | 1435 | self->netdev->stats.rx_crc_errors++; |
98b77773 | 1436 | if (lsr & IRCC_LSR_SIZE_ERROR) |
af049081 | 1437 | self->netdev->stats.rx_length_errors++; |
98b77773 | 1438 | if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN)) |
af049081 | 1439 | self->netdev->stats.rx_length_errors++; |
1da177e4 LT |
1440 | return; |
1441 | } | |
98b77773 | 1442 | |
1da177e4 | 1443 | /* Remove CRC */ |
98b77773 | 1444 | len -= self->io.speed < 4000000 ? 2 : 4; |
1da177e4 | 1445 | |
98b77773 | 1446 | if (len < 2 || len > 2050) { |
a97a6f10 | 1447 | IRDA_WARNING("%s(), bogus len=%d\n", __func__, len); |
1da177e4 LT |
1448 | return; |
1449 | } | |
a97a6f10 | 1450 | IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len); |
1da177e4 | 1451 | |
98b77773 DT |
1452 | skb = dev_alloc_skb(len + 1); |
1453 | if (!skb) { | |
1da177e4 | 1454 | IRDA_WARNING("%s(), memory squeeze, dropping frame.\n", |
a97a6f10 | 1455 | __func__); |
1da177e4 | 1456 | return; |
527b6af4 | 1457 | } |
1da177e4 | 1458 | /* Make sure IP header gets aligned */ |
527b6af4 | 1459 | skb_reserve(skb, 1); |
1da177e4 LT |
1460 | |
1461 | memcpy(skb_put(skb, len), self->rx_buff.data, len); | |
af049081 SH |
1462 | self->netdev->stats.rx_packets++; |
1463 | self->netdev->stats.rx_bytes += len; | |
1da177e4 LT |
1464 | |
1465 | skb->dev = self->netdev; | |
459a98ed | 1466 | skb_reset_mac_header(skb); |
1da177e4 LT |
1467 | skb->protocol = htons(ETH_P_IRDA); |
1468 | netif_rx(skb); | |
1469 | } | |
1470 | ||
1471 | /* | |
1472 | * Function smsc_ircc_sir_receive (self) | |
1473 | * | |
1474 | * Receive one frame from the infrared port | |
1475 | * | |
1476 | */ | |
527b6af4 | 1477 | static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self) |
1da177e4 LT |
1478 | { |
1479 | int boguscount = 0; | |
1480 | int iobase; | |
1481 | ||
1482 | IRDA_ASSERT(self != NULL, return;); | |
1483 | ||
1484 | iobase = self->io.sir_base; | |
1485 | ||
527b6af4 DT |
1486 | /* |
1487 | * Receive all characters in Rx FIFO, unwrap and unstuff them. | |
1488 | * async_unwrap_char will deliver all found frames | |
1da177e4 LT |
1489 | */ |
1490 | do { | |
af049081 | 1491 | async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff, |
98b77773 | 1492 | inb(iobase + UART_RX)); |
1da177e4 LT |
1493 | |
1494 | /* Make sure we don't stay here to long */ | |
1495 | if (boguscount++ > 32) { | |
a97a6f10 | 1496 | IRDA_DEBUG(2, "%s(), breaking!\n", __func__); |
1da177e4 LT |
1497 | break; |
1498 | } | |
98b77773 | 1499 | } while (inb(iobase + UART_LSR) & UART_LSR_DR); |
1da177e4 LT |
1500 | } |
1501 | ||
1502 | ||
1503 | /* | |
1504 | * Function smsc_ircc_interrupt (irq, dev_id, regs) | |
1505 | * | |
1506 | * An interrupt from the chip has arrived. Time to do some work | |
1507 | * | |
1508 | */ | |
28fc1f5a | 1509 | static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id) |
1da177e4 | 1510 | { |
28fc1f5a JG |
1511 | struct net_device *dev = dev_id; |
1512 | struct smsc_ircc_cb *self = netdev_priv(dev); | |
1da177e4 LT |
1513 | int iobase, iir, lcra, lsr; |
1514 | irqreturn_t ret = IRQ_NONE; | |
1515 | ||
1da177e4 | 1516 | /* Serialise the interrupt handler in various CPUs, stop Tx path */ |
527b6af4 | 1517 | spin_lock(&self->lock); |
1da177e4 LT |
1518 | |
1519 | /* Check if we should use the SIR interrupt handler */ | |
98b77773 | 1520 | if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) { |
1da177e4 LT |
1521 | ret = smsc_ircc_interrupt_sir(dev); |
1522 | goto irq_ret_unlock; | |
1523 | } | |
1524 | ||
1525 | iobase = self->io.fir_base; | |
1526 | ||
1527 | register_bank(iobase, 0); | |
98b77773 | 1528 | iir = inb(iobase + IRCC_IIR); |
527b6af4 | 1529 | if (iir == 0) |
1da177e4 LT |
1530 | goto irq_ret_unlock; |
1531 | ret = IRQ_HANDLED; | |
1532 | ||
1533 | /* Disable interrupts */ | |
98b77773 DT |
1534 | outb(0, iobase + IRCC_IER); |
1535 | lcra = inb(iobase + IRCC_LCR_A); | |
1536 | lsr = inb(iobase + IRCC_LSR); | |
527b6af4 | 1537 | |
a97a6f10 | 1538 | IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir); |
1da177e4 LT |
1539 | |
1540 | if (iir & IRCC_IIR_EOM) { | |
1541 | if (self->io.direction == IO_RECV) | |
80a90589 | 1542 | smsc_ircc_dma_receive_complete(self); |
1da177e4 | 1543 | else |
80a90589 | 1544 | smsc_ircc_dma_xmit_complete(self); |
527b6af4 | 1545 | |
80a90589 | 1546 | smsc_ircc_dma_receive(self); |
1da177e4 LT |
1547 | } |
1548 | ||
1549 | if (iir & IRCC_IIR_ACTIVE_FRAME) { | |
a97a6f10 | 1550 | /*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/ |
1da177e4 LT |
1551 | } |
1552 | ||
1553 | /* Enable interrupts again */ | |
1554 | ||
1555 | register_bank(iobase, 0); | |
98b77773 | 1556 | outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); |
1da177e4 LT |
1557 | |
1558 | irq_ret_unlock: | |
1559 | spin_unlock(&self->lock); | |
28fc1f5a | 1560 | |
1da177e4 LT |
1561 | return ret; |
1562 | } | |
1563 | ||
1564 | /* | |
7d12e780 | 1565 | * Function irport_interrupt_sir (irq, dev_id) |
1da177e4 LT |
1566 | * |
1567 | * Interrupt handler for SIR modes | |
1568 | */ | |
1569 | static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) | |
1570 | { | |
da0841a0 | 1571 | struct smsc_ircc_cb *self = netdev_priv(dev); |
1da177e4 LT |
1572 | int boguscount = 0; |
1573 | int iobase; | |
1574 | int iir, lsr; | |
1575 | ||
25985edc | 1576 | /* Already locked coming here in smsc_ircc_interrupt() */ |
1da177e4 LT |
1577 | /*spin_lock(&self->lock);*/ |
1578 | ||
1579 | iobase = self->io.sir_base; | |
1580 | ||
98b77773 | 1581 | iir = inb(iobase + UART_IIR) & UART_IIR_ID; |
1da177e4 LT |
1582 | if (iir == 0) |
1583 | return IRQ_NONE; | |
1584 | while (iir) { | |
1585 | /* Clear interrupt */ | |
98b77773 | 1586 | lsr = inb(iobase + UART_LSR); |
1da177e4 | 1587 | |
527b6af4 | 1588 | IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", |
a97a6f10 | 1589 | __func__, iir, lsr, iobase); |
1da177e4 LT |
1590 | |
1591 | switch (iir) { | |
1592 | case UART_IIR_RLSI: | |
a97a6f10 | 1593 | IRDA_DEBUG(2, "%s(), RLSI\n", __func__); |
1da177e4 LT |
1594 | break; |
1595 | case UART_IIR_RDI: | |
1596 | /* Receive interrupt */ | |
1597 | smsc_ircc_sir_receive(self); | |
1598 | break; | |
1599 | case UART_IIR_THRI: | |
1600 | if (lsr & UART_LSR_THRE) | |
1601 | /* Transmitter ready for data */ | |
1602 | smsc_ircc_sir_write_wakeup(self); | |
1603 | break; | |
1604 | default: | |
1605 | IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", | |
a97a6f10 | 1606 | __func__, iir); |
1da177e4 | 1607 | break; |
527b6af4 DT |
1608 | } |
1609 | ||
1da177e4 LT |
1610 | /* Make sure we don't stay here to long */ |
1611 | if (boguscount++ > 100) | |
1612 | break; | |
1613 | ||
527b6af4 | 1614 | iir = inb(iobase + UART_IIR) & UART_IIR_ID; |
1da177e4 LT |
1615 | } |
1616 | /*spin_unlock(&self->lock);*/ | |
1617 | return IRQ_HANDLED; | |
1618 | } | |
1619 | ||
1620 | ||
1621 | #if 0 /* unused */ | |
1622 | /* | |
1623 | * Function ircc_is_receiving (self) | |
1624 | * | |
1625 | * Return TRUE is we are currently receiving a frame | |
1626 | * | |
1627 | */ | |
1628 | static int ircc_is_receiving(struct smsc_ircc_cb *self) | |
1629 | { | |
1630 | int status = FALSE; | |
1631 | /* int iobase; */ | |
1632 | ||
a97a6f10 | 1633 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 LT |
1634 | |
1635 | IRDA_ASSERT(self != NULL, return FALSE;); | |
1636 | ||
a97a6f10 | 1637 | IRDA_DEBUG(0, "%s: dma count = %d\n", __func__, |
1da177e4 LT |
1638 | get_dma_residue(self->io.dma)); |
1639 | ||
1640 | status = (self->rx_buff.state != OUTSIDE_FRAME); | |
527b6af4 | 1641 | |
1da177e4 LT |
1642 | return status; |
1643 | } | |
1644 | #endif /* unused */ | |
1645 | ||
e812cb52 DT |
1646 | static int smsc_ircc_request_irq(struct smsc_ircc_cb *self) |
1647 | { | |
1648 | int error; | |
1649 | ||
1650 | error = request_irq(self->io.irq, smsc_ircc_interrupt, 0, | |
1651 | self->netdev->name, self->netdev); | |
1652 | if (error) | |
1653 | IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n", | |
a97a6f10 | 1654 | __func__, self->io.irq, error); |
e812cb52 DT |
1655 | |
1656 | return error; | |
1657 | } | |
1658 | ||
1659 | static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self) | |
1660 | { | |
1661 | unsigned long flags; | |
1662 | ||
1663 | spin_lock_irqsave(&self->lock, flags); | |
1664 | ||
1665 | self->io.speed = 0; | |
1666 | smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED); | |
1667 | ||
1668 | spin_unlock_irqrestore(&self->lock, flags); | |
1669 | } | |
1670 | ||
1671 | static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self) | |
1672 | { | |
1673 | int iobase = self->io.fir_base; | |
1674 | unsigned long flags; | |
1675 | ||
1676 | spin_lock_irqsave(&self->lock, flags); | |
1677 | ||
1678 | register_bank(iobase, 0); | |
1679 | outb(0, iobase + IRCC_IER); | |
1680 | outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER); | |
1681 | outb(0x00, iobase + IRCC_MASTER); | |
1682 | ||
1683 | spin_unlock_irqrestore(&self->lock, flags); | |
1684 | } | |
1685 | ||
1da177e4 LT |
1686 | |
1687 | /* | |
1688 | * Function smsc_ircc_net_open (dev) | |
1689 | * | |
1690 | * Start the device | |
1691 | * | |
1692 | */ | |
1693 | static int smsc_ircc_net_open(struct net_device *dev) | |
1694 | { | |
1695 | struct smsc_ircc_cb *self; | |
1da177e4 | 1696 | char hwname[16]; |
1da177e4 | 1697 | |
a97a6f10 | 1698 | IRDA_DEBUG(1, "%s\n", __func__); |
527b6af4 | 1699 | |
1da177e4 | 1700 | IRDA_ASSERT(dev != NULL, return -1;); |
da0841a0 | 1701 | self = netdev_priv(dev); |
1da177e4 | 1702 | IRDA_ASSERT(self != NULL, return 0;); |
527b6af4 | 1703 | |
e812cb52 | 1704 | if (self->io.suspended) { |
a97a6f10 | 1705 | IRDA_DEBUG(0, "%s(), device is suspended\n", __func__); |
e812cb52 DT |
1706 | return -EAGAIN; |
1707 | } | |
1708 | ||
527b6af4 | 1709 | if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name, |
1da177e4 LT |
1710 | (void *) dev)) { |
1711 | IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n", | |
a97a6f10 | 1712 | __func__, self->io.irq); |
1da177e4 LT |
1713 | return -EAGAIN; |
1714 | } | |
1715 | ||
e812cb52 | 1716 | smsc_ircc_start_interrupts(self); |
527b6af4 | 1717 | |
1da177e4 LT |
1718 | /* Give self a hardware name */ |
1719 | /* It would be cool to offer the chip revision here - Jean II */ | |
1720 | sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base); | |
1721 | ||
527b6af4 | 1722 | /* |
1da177e4 | 1723 | * Open new IrLAP layer instance, now that everything should be |
527b6af4 | 1724 | * initialized properly |
1da177e4 LT |
1725 | */ |
1726 | self->irlap = irlap_open(dev, &self->qos, hwname); | |
1727 | ||
1728 | /* | |
1729 | * Always allocate the DMA channel after the IRQ, | |
1730 | * and clean up on failure. | |
1731 | */ | |
1732 | if (request_dma(self->io.dma, dev->name)) { | |
1733 | smsc_ircc_net_close(dev); | |
1734 | ||
1735 | IRDA_WARNING("%s(), unable to allocate DMA=%d\n", | |
a97a6f10 | 1736 | __func__, self->io.dma); |
1da177e4 LT |
1737 | return -EAGAIN; |
1738 | } | |
527b6af4 | 1739 | |
1da177e4 LT |
1740 | netif_start_queue(dev); |
1741 | ||
1742 | return 0; | |
1743 | } | |
1744 | ||
1745 | /* | |
1746 | * Function smsc_ircc_net_close (dev) | |
1747 | * | |
1748 | * Stop the device | |
1749 | * | |
1750 | */ | |
1751 | static int smsc_ircc_net_close(struct net_device *dev) | |
1752 | { | |
1753 | struct smsc_ircc_cb *self; | |
1da177e4 | 1754 | |
a97a6f10 | 1755 | IRDA_DEBUG(1, "%s\n", __func__); |
527b6af4 | 1756 | |
1da177e4 | 1757 | IRDA_ASSERT(dev != NULL, return -1;); |
da0841a0 | 1758 | self = netdev_priv(dev); |
1da177e4 | 1759 | IRDA_ASSERT(self != NULL, return 0;); |
527b6af4 | 1760 | |
1da177e4 LT |
1761 | /* Stop device */ |
1762 | netif_stop_queue(dev); | |
527b6af4 | 1763 | |
1da177e4 LT |
1764 | /* Stop and remove instance of IrLAP */ |
1765 | if (self->irlap) | |
1766 | irlap_close(self->irlap); | |
1767 | self->irlap = NULL; | |
1768 | ||
e812cb52 DT |
1769 | smsc_ircc_stop_interrupts(self); |
1770 | ||
1771 | /* if we are called from smsc_ircc_resume we don't have IRQ reserved */ | |
1772 | if (!self->io.suspended) | |
1773 | free_irq(self->io.irq, dev); | |
1774 | ||
1da177e4 | 1775 | disable_dma(self->io.dma); |
1da177e4 LT |
1776 | free_dma(self->io.dma); |
1777 | ||
1778 | return 0; | |
1779 | } | |
1780 | ||
3ae5eaec | 1781 | static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state) |
1da177e4 | 1782 | { |
3ae5eaec | 1783 | struct smsc_ircc_cb *self = platform_get_drvdata(dev); |
6bb3b2cd | 1784 | |
9480e307 | 1785 | if (!self->io.suspended) { |
e812cb52 DT |
1786 | IRDA_DEBUG(1, "%s, Suspending\n", driver_name); |
1787 | ||
1788 | rtnl_lock(); | |
1789 | if (netif_running(self->netdev)) { | |
1790 | netif_device_detach(self->netdev); | |
1791 | smsc_ircc_stop_interrupts(self); | |
1792 | free_irq(self->io.irq, self->netdev); | |
1793 | disable_dma(self->io.dma); | |
1794 | } | |
98b77773 | 1795 | self->io.suspended = 1; |
e812cb52 | 1796 | rtnl_unlock(); |
98b77773 | 1797 | } |
6bb3b2cd DT |
1798 | |
1799 | return 0; | |
1da177e4 LT |
1800 | } |
1801 | ||
3ae5eaec | 1802 | static int smsc_ircc_resume(struct platform_device *dev) |
1da177e4 | 1803 | { |
3ae5eaec | 1804 | struct smsc_ircc_cb *self = platform_get_drvdata(dev); |
1da177e4 | 1805 | |
9480e307 | 1806 | if (self->io.suspended) { |
e812cb52 DT |
1807 | IRDA_DEBUG(1, "%s, Waking up\n", driver_name); |
1808 | ||
1809 | rtnl_lock(); | |
1810 | smsc_ircc_init_chip(self); | |
1811 | if (netif_running(self->netdev)) { | |
1812 | if (smsc_ircc_request_irq(self)) { | |
1813 | /* | |
1814 | * Don't fail resume process, just kill this | |
1815 | * network interface | |
1816 | */ | |
1817 | unregister_netdevice(self->netdev); | |
1818 | } else { | |
1819 | enable_dma(self->io.dma); | |
1820 | smsc_ircc_start_interrupts(self); | |
1821 | netif_device_attach(self->netdev); | |
1822 | } | |
1823 | } | |
6bb3b2cd | 1824 | self->io.suspended = 0; |
e812cb52 | 1825 | rtnl_unlock(); |
6bb3b2cd | 1826 | } |
1da177e4 LT |
1827 | return 0; |
1828 | } | |
1829 | ||
1830 | /* | |
1831 | * Function smsc_ircc_close (self) | |
1832 | * | |
1833 | * Close driver instance | |
1834 | * | |
1835 | */ | |
1836 | static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) | |
1837 | { | |
a97a6f10 | 1838 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 LT |
1839 | |
1840 | IRDA_ASSERT(self != NULL, return -1;); | |
1841 | ||
6bb3b2cd | 1842 | platform_device_unregister(self->pldev); |
1da177e4 LT |
1843 | |
1844 | /* Remove netdevice */ | |
1845 | unregister_netdev(self->netdev); | |
1846 | ||
e812cb52 | 1847 | smsc_ircc_stop_interrupts(self); |
1da177e4 LT |
1848 | |
1849 | /* Release the PORTS that this driver is using */ | |
a97a6f10 | 1850 | IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__, |
1da177e4 LT |
1851 | self->io.fir_base); |
1852 | ||
1853 | release_region(self->io.fir_base, self->io.fir_ext); | |
1854 | ||
a97a6f10 | 1855 | IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__, |
1da177e4 LT |
1856 | self->io.sir_base); |
1857 | ||
1858 | release_region(self->io.sir_base, self->io.sir_ext); | |
1859 | ||
1860 | if (self->tx_buff.head) | |
1861 | dma_free_coherent(NULL, self->tx_buff.truesize, | |
1862 | self->tx_buff.head, self->tx_buff_dma); | |
527b6af4 | 1863 | |
1da177e4 LT |
1864 | if (self->rx_buff.head) |
1865 | dma_free_coherent(NULL, self->rx_buff.truesize, | |
1866 | self->rx_buff.head, self->rx_buff_dma); | |
1867 | ||
1868 | free_netdev(self->netdev); | |
1869 | ||
1870 | return 0; | |
1871 | } | |
1872 | ||
1873 | static void __exit smsc_ircc_cleanup(void) | |
1874 | { | |
1875 | int i; | |
1876 | ||
a97a6f10 | 1877 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 | 1878 | |
98b77773 | 1879 | for (i = 0; i < 2; i++) { |
1da177e4 LT |
1880 | if (dev_self[i]) |
1881 | smsc_ircc_close(dev_self[i]); | |
1882 | } | |
6bb3b2cd | 1883 | |
d0d4f69b BH |
1884 | if (pnp_driver_registered) |
1885 | pnp_unregister_driver(&smsc_ircc_pnp_driver); | |
1886 | ||
3ae5eaec | 1887 | platform_driver_unregister(&smsc_ircc_driver); |
1da177e4 LT |
1888 | } |
1889 | ||
1890 | /* | |
1891 | * Start SIR operations | |
1892 | * | |
1893 | * This function *must* be called with spinlock held, because it may | |
1894 | * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II | |
1895 | */ | |
0e49e645 | 1896 | static void smsc_ircc_sir_start(struct smsc_ircc_cb *self) |
1da177e4 LT |
1897 | { |
1898 | struct net_device *dev; | |
1899 | int fir_base, sir_base; | |
1900 | ||
a97a6f10 | 1901 | IRDA_DEBUG(3, "%s\n", __func__); |
1da177e4 | 1902 | |
527b6af4 | 1903 | IRDA_ASSERT(self != NULL, return;); |
98b77773 | 1904 | dev = self->netdev; |
527b6af4 | 1905 | IRDA_ASSERT(dev != NULL, return;); |
1da177e4 LT |
1906 | |
1907 | fir_base = self->io.fir_base; | |
1908 | sir_base = self->io.sir_base; | |
1909 | ||
1910 | /* Reset everything */ | |
98b77773 | 1911 | outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER); |
1da177e4 LT |
1912 | |
1913 | #if SMSC_IRCC2_C_SIR_STOP | |
1914 | /*smsc_ircc_sir_stop(self);*/ | |
1915 | #endif | |
1916 | ||
1917 | register_bank(fir_base, 1); | |
98b77773 | 1918 | outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA); |
1da177e4 LT |
1919 | |
1920 | /* Initialize UART */ | |
98b77773 DT |
1921 | outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */ |
1922 | outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR); | |
527b6af4 | 1923 | |
1da177e4 | 1924 | /* Turn on interrups */ |
98b77773 | 1925 | outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER); |
1da177e4 | 1926 | |
a97a6f10 | 1927 | IRDA_DEBUG(3, "%s() - exit\n", __func__); |
1da177e4 | 1928 | |
98b77773 | 1929 | outb(0x00, fir_base + IRCC_MASTER); |
1da177e4 LT |
1930 | } |
1931 | ||
1932 | #if SMSC_IRCC2_C_SIR_STOP | |
1933 | void smsc_ircc_sir_stop(struct smsc_ircc_cb *self) | |
1934 | { | |
1935 | int iobase; | |
1936 | ||
a97a6f10 | 1937 | IRDA_DEBUG(3, "%s\n", __func__); |
1da177e4 LT |
1938 | iobase = self->io.sir_base; |
1939 | ||
1940 | /* Reset UART */ | |
98b77773 | 1941 | outb(0, iobase + UART_MCR); |
527b6af4 | 1942 | |
1da177e4 | 1943 | /* Turn off interrupts */ |
98b77773 | 1944 | outb(0, iobase + UART_IER); |
1da177e4 LT |
1945 | } |
1946 | #endif | |
1947 | ||
1948 | /* | |
1949 | * Function smsc_sir_write_wakeup (self) | |
1950 | * | |
1951 | * Called by the SIR interrupt handler when there's room for more data. | |
1952 | * If we have more packets to send, we send them here. | |
1953 | * | |
1954 | */ | |
1955 | static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) | |
1956 | { | |
1957 | int actual = 0; | |
1958 | int iobase; | |
1959 | int fcr; | |
1960 | ||
1961 | IRDA_ASSERT(self != NULL, return;); | |
1962 | ||
a97a6f10 | 1963 | IRDA_DEBUG(4, "%s\n", __func__); |
1da177e4 LT |
1964 | |
1965 | iobase = self->io.sir_base; | |
1966 | ||
1967 | /* Finished with frame? */ | |
1968 | if (self->tx_buff.len > 0) { | |
1969 | /* Write data left in transmit buffer */ | |
527b6af4 | 1970 | actual = smsc_ircc_sir_write(iobase, self->io.fifo_size, |
1da177e4 LT |
1971 | self->tx_buff.data, self->tx_buff.len); |
1972 | self->tx_buff.data += actual; | |
1973 | self->tx_buff.len -= actual; | |
1974 | } else { | |
527b6af4 | 1975 | |
1da177e4 | 1976 | /*if (self->tx_buff.len ==0) {*/ |
527b6af4 DT |
1977 | |
1978 | /* | |
1979 | * Now serial buffer is almost free & we can start | |
1da177e4 LT |
1980 | * transmission of another packet. But first we must check |
1981 | * if we need to change the speed of the hardware | |
1982 | */ | |
1983 | if (self->new_speed) { | |
1984 | IRDA_DEBUG(5, "%s(), Changing speed to %d.\n", | |
a97a6f10 | 1985 | __func__, self->new_speed); |
1da177e4 LT |
1986 | smsc_ircc_sir_wait_hw_transmitter_finish(self); |
1987 | smsc_ircc_change_speed(self, self->new_speed); | |
1988 | self->new_speed = 0; | |
1989 | } else { | |
1990 | /* Tell network layer that we want more frames */ | |
1991 | netif_wake_queue(self->netdev); | |
1992 | } | |
af049081 | 1993 | self->netdev->stats.tx_packets++; |
1da177e4 | 1994 | |
98b77773 DT |
1995 | if (self->io.speed <= 115200) { |
1996 | /* | |
1997 | * Reset Rx FIFO to make sure that all reflected transmit data | |
1998 | * is discarded. This is needed for half duplex operation | |
1999 | */ | |
2000 | fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR; | |
2001 | fcr |= self->io.speed < 38400 ? | |
2002 | UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14; | |
1da177e4 | 2003 | |
98b77773 | 2004 | outb(fcr, iobase + UART_FCR); |
1da177e4 | 2005 | |
98b77773 DT |
2006 | /* Turn on receive interrupts */ |
2007 | outb(UART_IER_RDI, iobase + UART_IER); | |
1da177e4 LT |
2008 | } |
2009 | } | |
2010 | } | |
2011 | ||
2012 | /* | |
2013 | * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len) | |
2014 | * | |
2015 | * Fill Tx FIFO with transmit data | |
2016 | * | |
2017 | */ | |
2018 | static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) | |
2019 | { | |
2020 | int actual = 0; | |
527b6af4 | 2021 | |
1da177e4 | 2022 | /* Tx FIFO should be empty! */ |
98b77773 | 2023 | if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) { |
a97a6f10 | 2024 | IRDA_WARNING("%s(), failed, fifo not empty!\n", __func__); |
1da177e4 LT |
2025 | return 0; |
2026 | } | |
527b6af4 | 2027 | |
1da177e4 | 2028 | /* Fill FIFO with current frame */ |
98b77773 | 2029 | while (fifo_size-- > 0 && actual < len) { |
1da177e4 | 2030 | /* Transmit next byte */ |
98b77773 | 2031 | outb(buf[actual], iobase + UART_TX); |
1da177e4 LT |
2032 | actual++; |
2033 | } | |
2034 | return actual; | |
2035 | } | |
2036 | ||
2037 | /* | |
2038 | * Function smsc_ircc_is_receiving (self) | |
2039 | * | |
2040 | * Returns true is we are currently receiving data | |
2041 | * | |
2042 | */ | |
2043 | static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self) | |
2044 | { | |
807540ba | 2045 | return self->rx_buff.state != OUTSIDE_FRAME; |
1da177e4 LT |
2046 | } |
2047 | ||
2048 | ||
2049 | /* | |
2050 | * Function smsc_ircc_probe_transceiver(self) | |
2051 | * | |
2052 | * Tries to find the used Transceiver | |
2053 | * | |
2054 | */ | |
2055 | static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self) | |
2056 | { | |
2057 | unsigned int i; | |
527b6af4 | 2058 | |
1da177e4 | 2059 | IRDA_ASSERT(self != NULL, return;); |
527b6af4 | 2060 | |
98b77773 DT |
2061 | for (i = 0; smsc_transceivers[i].name != NULL; i++) |
2062 | if (smsc_transceivers[i].probe(self->io.fir_base)) { | |
1da177e4 LT |
2063 | IRDA_MESSAGE(" %s transceiver found\n", |
2064 | smsc_transceivers[i].name); | |
98b77773 | 2065 | self->transceiver= i + 1; |
1da177e4 LT |
2066 | return; |
2067 | } | |
98b77773 | 2068 | |
1da177e4 LT |
2069 | IRDA_MESSAGE("No transceiver found. Defaulting to %s\n", |
2070 | smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name); | |
527b6af4 | 2071 | |
98b77773 | 2072 | self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER; |
1da177e4 LT |
2073 | } |
2074 | ||
2075 | ||
2076 | /* | |
2077 | * Function smsc_ircc_set_transceiver_for_speed(self, speed) | |
2078 | * | |
2079 | * Set the transceiver according to the speed | |
2080 | * | |
2081 | */ | |
2082 | static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed) | |
2083 | { | |
2084 | unsigned int trx; | |
527b6af4 | 2085 | |
1da177e4 | 2086 | trx = self->transceiver; |
98b77773 DT |
2087 | if (trx > 0) |
2088 | smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed); | |
1da177e4 LT |
2089 | } |
2090 | ||
2091 | /* | |
2092 | * Function smsc_ircc_wait_hw_transmitter_finish () | |
2093 | * | |
2094 | * Wait for the real end of HW transmission | |
2095 | * | |
2096 | * The UART is a strict FIFO, and we get called only when we have finished | |
2097 | * pushing data to the FIFO, so the maximum amount of time we must wait | |
2098 | * is only for the FIFO to drain out. | |
2099 | * | |
2100 | * We use a simple calibrated loop. We may need to adjust the loop | |
2101 | * delay (udelay) to balance I/O traffic and latency. And we also need to | |
2102 | * adjust the maximum timeout. | |
2103 | * It would probably be better to wait for the proper interrupt, | |
2104 | * but it doesn't seem to be available. | |
2105 | * | |
2106 | * We can't use jiffies or kernel timers because : | |
2107 | * 1) We are called from the interrupt handler, which disable softirqs, | |
2108 | * so jiffies won't be increased | |
2109 | * 2) Jiffies granularity is usually very coarse (10ms), and we don't | |
2110 | * want to wait that long to detect stuck hardware. | |
2111 | * Jean II | |
2112 | */ | |
2113 | ||
2114 | static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self) | |
2115 | { | |
98b77773 | 2116 | int iobase = self->io.sir_base; |
1da177e4 | 2117 | int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US; |
527b6af4 | 2118 | |
1da177e4 | 2119 | /* Calibrated busy loop */ |
98b77773 | 2120 | while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT)) |
1da177e4 LT |
2121 | udelay(1); |
2122 | ||
adbf7f01 | 2123 | if (count < 0) |
a97a6f10 | 2124 | IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__); |
1da177e4 LT |
2125 | } |
2126 | ||
2127 | ||
2128 | /* PROBING | |
2129 | * | |
d94c77b9 DB |
2130 | * REVISIT we can be told about the device by PNP, and should use that info |
2131 | * instead of probing hardware and creating a platform_device ... | |
1da177e4 LT |
2132 | */ |
2133 | ||
2134 | static int __init smsc_ircc_look_for_chips(void) | |
2135 | { | |
b6158d23 | 2136 | struct smsc_chip_address *address; |
98b77773 | 2137 | char *type; |
1da177e4 | 2138 | unsigned int cfg_base, found; |
527b6af4 | 2139 | |
1da177e4 LT |
2140 | found = 0; |
2141 | address = possible_addresses; | |
527b6af4 | 2142 | |
98b77773 | 2143 | while (address->cfg_base) { |
1da177e4 | 2144 | cfg_base = address->cfg_base; |
527b6af4 | 2145 | |
a97a6f10 | 2146 | /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/ |
527b6af4 | 2147 | |
98b77773 | 2148 | if (address->type & SMSCSIO_TYPE_FDC) { |
1da177e4 | 2149 | type = "FDC"; |
98b77773 DT |
2150 | if (address->type & SMSCSIO_TYPE_FLAT) |
2151 | if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type)) | |
2152 | found++; | |
2153 | ||
2154 | if (address->type & SMSCSIO_TYPE_PAGED) | |
2155 | if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type)) | |
2156 | found++; | |
1da177e4 | 2157 | } |
98b77773 | 2158 | if (address->type & SMSCSIO_TYPE_LPC) { |
1da177e4 | 2159 | type = "LPC"; |
98b77773 DT |
2160 | if (address->type & SMSCSIO_TYPE_FLAT) |
2161 | if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type)) | |
2162 | found++; | |
2163 | ||
2164 | if (address->type & SMSCSIO_TYPE_PAGED) | |
2165 | if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type)) | |
2166 | found++; | |
1da177e4 LT |
2167 | } |
2168 | address++; | |
2169 | } | |
2170 | return found; | |
527b6af4 | 2171 | } |
1da177e4 LT |
2172 | |
2173 | /* | |
2174 | * Function smsc_superio_flat (chip, base, type) | |
2175 | * | |
2176 | * Try to get configuration of a smc SuperIO chip with flat register model | |
2177 | * | |
2178 | */ | |
b6158d23 | 2179 | static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type) |
1da177e4 LT |
2180 | { |
2181 | unsigned short firbase, sirbase; | |
2182 | u8 mode, dma, irq; | |
2183 | int ret = -ENODEV; | |
2184 | ||
a97a6f10 | 2185 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 | 2186 | |
98b77773 | 2187 | if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL) |
1da177e4 LT |
2188 | return ret; |
2189 | ||
2190 | outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase); | |
98b77773 | 2191 | mode = inb(cfgbase + 1); |
527b6af4 | 2192 | |
a97a6f10 | 2193 | /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/ |
527b6af4 | 2194 | |
98b77773 | 2195 | if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA)) |
a97a6f10 | 2196 | IRDA_WARNING("%s(): IrDA not enabled\n", __func__); |
1da177e4 LT |
2197 | |
2198 | outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase); | |
98b77773 | 2199 | sirbase = inb(cfgbase + 1) << 2; |
1da177e4 | 2200 | |
527b6af4 | 2201 | /* FIR iobase */ |
1da177e4 | 2202 | outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase); |
98b77773 | 2203 | firbase = inb(cfgbase + 1) << 3; |
1da177e4 LT |
2204 | |
2205 | /* DMA */ | |
2206 | outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase); | |
98b77773 | 2207 | dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK; |
527b6af4 | 2208 | |
1da177e4 LT |
2209 | /* IRQ */ |
2210 | outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase); | |
98b77773 | 2211 | irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; |
1da177e4 | 2212 | |
a97a6f10 | 2213 | IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __func__, firbase, sirbase, dma, irq, mode); |
1da177e4 | 2214 | |
98b77773 DT |
2215 | if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0) |
2216 | ret = 0; | |
527b6af4 | 2217 | |
1da177e4 LT |
2218 | /* Exit configuration */ |
2219 | outb(SMSCSIO_CFGEXITKEY, cfgbase); | |
2220 | ||
2221 | return ret; | |
2222 | } | |
2223 | ||
2224 | /* | |
2225 | * Function smsc_superio_paged (chip, base, type) | |
2226 | * | |
2227 | * Try to get configuration of a smc SuperIO chip with paged register model | |
2228 | * | |
2229 | */ | |
b6158d23 | 2230 | static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type) |
1da177e4 LT |
2231 | { |
2232 | unsigned short fir_io, sir_io; | |
2233 | int ret = -ENODEV; | |
527b6af4 | 2234 | |
a97a6f10 | 2235 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 | 2236 | |
98b77773 | 2237 | if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL) |
1da177e4 | 2238 | return ret; |
527b6af4 | 2239 | |
1da177e4 LT |
2240 | /* Select logical device (UART2) */ |
2241 | outb(0x07, cfg_base); | |
2242 | outb(0x05, cfg_base + 1); | |
527b6af4 | 2243 | |
1da177e4 LT |
2244 | /* SIR iobase */ |
2245 | outb(0x60, cfg_base); | |
98b77773 | 2246 | sir_io = inb(cfg_base + 1) << 8; |
1da177e4 LT |
2247 | outb(0x61, cfg_base); |
2248 | sir_io |= inb(cfg_base + 1); | |
527b6af4 | 2249 | |
1da177e4 LT |
2250 | /* Read FIR base */ |
2251 | outb(0x62, cfg_base); | |
2252 | fir_io = inb(cfg_base + 1) << 8; | |
2253 | outb(0x63, cfg_base); | |
2254 | fir_io |= inb(cfg_base + 1); | |
2255 | outb(0x2b, cfg_base); /* ??? */ | |
2256 | ||
98b77773 DT |
2257 | if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0) |
2258 | ret = 0; | |
527b6af4 | 2259 | |
1da177e4 LT |
2260 | /* Exit configuration */ |
2261 | outb(SMSCSIO_CFGEXITKEY, cfg_base); | |
2262 | ||
2263 | return ret; | |
2264 | } | |
2265 | ||
2266 | ||
948252cb | 2267 | static int __init smsc_access(unsigned short cfg_base, unsigned char reg) |
1da177e4 | 2268 | { |
a97a6f10 | 2269 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 LT |
2270 | |
2271 | outb(reg, cfg_base); | |
98b77773 | 2272 | return inb(cfg_base) != reg ? -1 : 0; |
1da177e4 LT |
2273 | } |
2274 | ||
948252cb | 2275 | static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type) |
1da177e4 | 2276 | { |
98b77773 | 2277 | u8 devid, xdevid, rev; |
1da177e4 | 2278 | |
a97a6f10 | 2279 | IRDA_DEBUG(1, "%s\n", __func__); |
1da177e4 LT |
2280 | |
2281 | /* Leave configuration */ | |
2282 | ||
2283 | outb(SMSCSIO_CFGEXITKEY, cfg_base); | |
2284 | ||
2285 | if (inb(cfg_base) == SMSCSIO_CFGEXITKEY) /* not a smc superio chip */ | |
2286 | return NULL; | |
2287 | ||
2288 | outb(reg, cfg_base); | |
2289 | ||
98b77773 | 2290 | xdevid = inb(cfg_base + 1); |
1da177e4 LT |
2291 | |
2292 | /* Enter configuration */ | |
2293 | ||
2294 | outb(SMSCSIO_CFGACCESSKEY, cfg_base); | |
2295 | ||
2296 | #if 0 | |
2297 | if (smsc_access(cfg_base,0x55)) /* send second key and check */ | |
2298 | return NULL; | |
2299 | #endif | |
527b6af4 | 2300 | |
1da177e4 LT |
2301 | /* probe device ID */ |
2302 | ||
98b77773 | 2303 | if (smsc_access(cfg_base, reg)) |
1da177e4 LT |
2304 | return NULL; |
2305 | ||
98b77773 | 2306 | devid = inb(cfg_base + 1); |
527b6af4 | 2307 | |
98b77773 | 2308 | if (devid == 0 || devid == 0xff) /* typical values for unused port */ |
1da177e4 LT |
2309 | return NULL; |
2310 | ||
2311 | /* probe revision ID */ | |
2312 | ||
98b77773 | 2313 | if (smsc_access(cfg_base, reg + 1)) |
1da177e4 LT |
2314 | return NULL; |
2315 | ||
98b77773 | 2316 | rev = inb(cfg_base + 1); |
1da177e4 | 2317 | |
98b77773 | 2318 | if (rev >= 128) /* i think this will make no sense */ |
1da177e4 LT |
2319 | return NULL; |
2320 | ||
98b77773 | 2321 | if (devid == xdevid) /* protection against false positives */ |
1da177e4 LT |
2322 | return NULL; |
2323 | ||
2324 | /* Check for expected device ID; are there others? */ | |
2325 | ||
98b77773 | 2326 | while (chip->devid != devid) { |
1da177e4 LT |
2327 | |
2328 | chip++; | |
2329 | ||
98b77773 | 2330 | if (chip->name == NULL) |
1da177e4 LT |
2331 | return NULL; |
2332 | } | |
2333 | ||
98b77773 DT |
2334 | IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n", |
2335 | devid, rev, cfg_base, type, chip->name); | |
1da177e4 | 2336 | |
98b77773 | 2337 | if (chip->rev > rev) { |
527b6af4 | 2338 | IRDA_MESSAGE("Revision higher than expected\n"); |
1da177e4 LT |
2339 | return NULL; |
2340 | } | |
527b6af4 | 2341 | |
98b77773 | 2342 | if (chip->flags & NoIRDA) |
1da177e4 LT |
2343 | IRDA_MESSAGE("chipset does not support IRDA\n"); |
2344 | ||
2345 | return chip; | |
2346 | } | |
2347 | ||
2348 | static int __init smsc_superio_fdc(unsigned short cfg_base) | |
2349 | { | |
2350 | int ret = -1; | |
2351 | ||
2352 | if (!request_region(cfg_base, 2, driver_name)) { | |
2353 | IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", | |
a97a6f10 | 2354 | __func__, cfg_base); |
1da177e4 | 2355 | } else { |
98b77773 DT |
2356 | if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") || |
2357 | !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC")) | |
1da177e4 LT |
2358 | ret = 0; |
2359 | ||
2360 | release_region(cfg_base, 2); | |
2361 | } | |
2362 | ||
2363 | return ret; | |
2364 | } | |
2365 | ||
2366 | static int __init smsc_superio_lpc(unsigned short cfg_base) | |
2367 | { | |
2368 | int ret = -1; | |
2369 | ||
2370 | if (!request_region(cfg_base, 2, driver_name)) { | |
2371 | IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", | |
a97a6f10 | 2372 | __func__, cfg_base); |
1da177e4 | 2373 | } else { |
98b77773 DT |
2374 | if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") || |
2375 | !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC")) | |
1da177e4 | 2376 | ret = 0; |
98b77773 | 2377 | |
1da177e4 LT |
2378 | release_region(cfg_base, 2); |
2379 | } | |
2380 | return ret; | |
2381 | } | |
2382 | ||
c1e14a6e LW |
2383 | /* |
2384 | * Look for some specific subsystem setups that need | |
2385 | * pre-configuration not properly done by the BIOS (especially laptops) | |
2386 | * This code is based in part on smcinit.c, tosh1800-smcinit.c | |
2387 | * and tosh2450-smcinit.c. The table lists the device entries | |
08d09997 LW |
2388 | * for ISA bridges with an LPC (Low Pin Count) controller which |
2389 | * handles the communication with the SMSC device. After the LPC | |
2390 | * controller is initialized through PCI, the SMSC device is initialized | |
2391 | * through a dedicated port in the ISA port-mapped I/O area, this latter | |
2392 | * area is used to configure the SMSC device with default | |
2393 | * SIR and FIR I/O ports, DMA and IRQ. Different vendors have | |
2394 | * used different sets of parameters and different control port | |
2395 | * addresses making a subsystem device table necessary. | |
c1e14a6e LW |
2396 | */ |
2397 | #ifdef CONFIG_PCI | |
948252cb | 2398 | static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = { |
895de090 LWLE |
2399 | /* |
2400 | * Subsystems needing entries: | |
2401 | * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family | |
2402 | * 0x10b9:0x1533 0x0e11:0x005a Compaq nc4000 family | |
2403 | * 0x8086:0x24cc 0x0e11:0x002a HP nx9000 family | |
2404 | */ | |
2405 | { | |
2406 | /* Guessed entry */ | |
5ee5a07c | 2407 | .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ |
895de090 LWLE |
2408 | .device = 0x24cc, |
2409 | .subvendor = 0x103c, | |
2410 | .subdevice = 0x08bc, | |
2411 | .sir_io = 0x02f8, | |
2412 | .fir_io = 0x0130, | |
2413 | .fir_irq = 0x05, | |
2414 | .fir_dma = 0x03, | |
2415 | .cfg_base = 0x004e, | |
2416 | .preconfigure = preconfigure_through_82801, | |
2417 | .name = "HP nx5000 family", | |
2418 | }, | |
c1e14a6e | 2419 | { |
5ee5a07c | 2420 | .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ |
c1e14a6e LW |
2421 | .device = 0x24cc, |
2422 | .subvendor = 0x103c, | |
2423 | .subdevice = 0x088c, | |
08d09997 LW |
2424 | /* Quite certain these are the same for nc8000 as for nc6000 */ |
2425 | .sir_io = 0x02f8, | |
c1e14a6e | 2426 | .fir_io = 0x0130, |
08d09997 | 2427 | .fir_irq = 0x05, |
c1e14a6e LW |
2428 | .fir_dma = 0x03, |
2429 | .cfg_base = 0x004e, | |
2430 | .preconfigure = preconfigure_through_82801, | |
895de090 | 2431 | .name = "HP nc8000 family", |
c1e14a6e LW |
2432 | }, |
2433 | { | |
5ee5a07c | 2434 | .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ |
c1e14a6e LW |
2435 | .device = 0x24cc, |
2436 | .subvendor = 0x103c, | |
2437 | .subdevice = 0x0890, | |
2438 | .sir_io = 0x02f8, | |
2439 | .fir_io = 0x0130, | |
08d09997 | 2440 | .fir_irq = 0x05, |
c1e14a6e LW |
2441 | .fir_dma = 0x03, |
2442 | .cfg_base = 0x004e, | |
2443 | .preconfigure = preconfigure_through_82801, | |
895de090 LWLE |
2444 | .name = "HP nc6000 family", |
2445 | }, | |
2446 | { | |
5ee5a07c | 2447 | .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ |
895de090 LWLE |
2448 | .device = 0x24cc, |
2449 | .subvendor = 0x0e11, | |
2450 | .subdevice = 0x0860, | |
2451 | /* I assume these are the same for x1000 as for the others */ | |
2452 | .sir_io = 0x02e8, | |
2453 | .fir_io = 0x02f8, | |
2454 | .fir_irq = 0x07, | |
2455 | .fir_dma = 0x03, | |
2456 | .cfg_base = 0x002e, | |
2457 | .preconfigure = preconfigure_through_82801, | |
2458 | .name = "Compaq x1000 family", | |
c1e14a6e LW |
2459 | }, |
2460 | { | |
08d09997 | 2461 | /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */ |
5ee5a07c | 2462 | .vendor = PCI_VENDOR_ID_INTEL, |
c1e14a6e LW |
2463 | .device = 0x24c0, |
2464 | .subvendor = 0x1179, | |
08d09997 | 2465 | .subdevice = 0xffff, /* 0xffff is "any" */ |
c1e14a6e LW |
2466 | .sir_io = 0x03f8, |
2467 | .fir_io = 0x0130, | |
2468 | .fir_irq = 0x07, | |
2469 | .fir_dma = 0x01, | |
2470 | .cfg_base = 0x002e, | |
2471 | .preconfigure = preconfigure_through_82801, | |
08d09997 | 2472 | .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge", |
c1e14a6e LW |
2473 | }, |
2474 | { | |
5ee5a07c | 2475 | .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801CAM ISA bridge */ |
08d09997 | 2476 | .device = 0x248c, |
c1e14a6e | 2477 | .subvendor = 0x1179, |
08d09997 | 2478 | .subdevice = 0xffff, /* 0xffff is "any" */ |
c1e14a6e LW |
2479 | .sir_io = 0x03f8, |
2480 | .fir_io = 0x0130, | |
2481 | .fir_irq = 0x03, | |
2482 | .fir_dma = 0x03, | |
2483 | .cfg_base = 0x002e, | |
2484 | .preconfigure = preconfigure_through_82801, | |
08d09997 | 2485 | .name = "Toshiba laptop with Intel 82801CAM ISA bridge", |
c1e14a6e LW |
2486 | }, |
2487 | { | |
08d09997 | 2488 | /* 82801DBM (ICH4-M) LPC Interface Bridge */ |
5ee5a07c | 2489 | .vendor = PCI_VENDOR_ID_INTEL, |
08d09997 LW |
2490 | .device = 0x24cc, |
2491 | .subvendor = 0x1179, | |
2492 | .subdevice = 0xffff, /* 0xffff is "any" */ | |
2493 | .sir_io = 0x03f8, | |
2494 | .fir_io = 0x0130, | |
2495 | .fir_irq = 0x03, | |
2496 | .fir_dma = 0x03, | |
2497 | .cfg_base = 0x002e, | |
2498 | .preconfigure = preconfigure_through_82801, | |
2499 | .name = "Toshiba laptop with Intel 8281DBM LPC bridge", | |
2500 | }, | |
2501 | { | |
2502 | /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */ | |
5ee5a07c | 2503 | .vendor = PCI_VENDOR_ID_AL, |
c1e14a6e LW |
2504 | .device = 0x1533, |
2505 | .subvendor = 0x1179, | |
08d09997 | 2506 | .subdevice = 0xffff, /* 0xffff is "any" */ |
c1e14a6e LW |
2507 | .sir_io = 0x02e8, |
2508 | .fir_io = 0x02f8, | |
2509 | .fir_irq = 0x07, | |
2510 | .fir_dma = 0x03, | |
2511 | .cfg_base = 0x002e, | |
2512 | .preconfigure = preconfigure_through_ali, | |
08d09997 | 2513 | .name = "Toshiba laptop with ALi ISA bridge", |
c1e14a6e LW |
2514 | }, |
2515 | { } // Terminator | |
2516 | }; | |
2517 | ||
2518 | ||
2519 | /* | |
08d09997 LW |
2520 | * This sets up the basic SMSC parameters |
2521 | * (FIR port, SIR port, FIR DMA, FIR IRQ) | |
c1e14a6e LW |
2522 | * through the chip configuration port. |
2523 | */ | |
948252cb | 2524 | static int __init preconfigure_smsc_chip(struct |
08d09997 LW |
2525 | smsc_ircc_subsystem_configuration |
2526 | *conf) | |
c1e14a6e LW |
2527 | { |
2528 | unsigned short iobase = conf->cfg_base; | |
2529 | unsigned char tmpbyte; | |
2530 | ||
2531 | outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state | |
2532 | outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID | |
2533 | tmpbyte = inb(iobase +1); // Read device ID | |
08d09997 LW |
2534 | IRDA_DEBUG(0, |
2535 | "Detected Chip id: 0x%02x, setting up registers...\n", | |
2536 | tmpbyte); | |
c1e14a6e LW |
2537 | |
2538 | /* Disable UART1 and set up SIR I/O port */ | |
2539 | outb(0x24, iobase); // select CR24 - UART1 base addr | |
2540 | outb(0x00, iobase + 1); // disable UART1 | |
2541 | outb(SMSCSIOFLAT_UART2BASEADDR_REG, iobase); // select CR25 - UART2 base addr | |
2542 | outb( (conf->sir_io >> 2), iobase + 1); // bits 2-9 of 0x3f8 | |
2543 | tmpbyte = inb(iobase + 1); | |
2544 | if (tmpbyte != (conf->sir_io >> 2) ) { | |
2545 | IRDA_WARNING("ERROR: could not configure SIR ioport.\n"); | |
08d09997 | 2546 | IRDA_WARNING("Try to supply ircc_cfg argument.\n"); |
c1e14a6e LW |
2547 | return -ENXIO; |
2548 | } | |
2549 | ||
2550 | /* Set up FIR IRQ channel for UART2 */ | |
2551 | outb(SMSCSIOFLAT_UARTIRQSELECT_REG, iobase); // select CR28 - UART1,2 IRQ select | |
2552 | tmpbyte = inb(iobase + 1); | |
2553 | tmpbyte &= SMSCSIOFLAT_UART1IRQSELECT_MASK; // Do not touch the UART1 portion | |
2554 | tmpbyte |= (conf->fir_irq & SMSCSIOFLAT_UART2IRQSELECT_MASK); | |
2555 | outb(tmpbyte, iobase + 1); | |
2556 | tmpbyte = inb(iobase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; | |
2557 | if (tmpbyte != conf->fir_irq) { | |
2558 | IRDA_WARNING("ERROR: could not configure FIR IRQ channel.\n"); | |
2559 | return -ENXIO; | |
2560 | } | |
2561 | ||
2562 | /* Set up FIR I/O port */ | |
2563 | outb(SMSCSIOFLAT_FIRBASEADDR_REG, iobase); // CR2B - SCE (FIR) base addr | |
2564 | outb((conf->fir_io >> 3), iobase + 1); | |
2565 | tmpbyte = inb(iobase + 1); | |
2566 | if (tmpbyte != (conf->fir_io >> 3) ) { | |
2567 | IRDA_WARNING("ERROR: could not configure FIR I/O port.\n"); | |
2568 | return -ENXIO; | |
2569 | } | |
2570 | ||
2571 | /* Set up FIR DMA channel */ | |
2572 | outb(SMSCSIOFLAT_FIRDMASELECT_REG, iobase); // CR2C - SCE (FIR) DMA select | |
2573 | outb((conf->fir_dma & LPC47N227_FIRDMASELECT_MASK), iobase + 1); // DMA | |
2574 | tmpbyte = inb(iobase + 1) & LPC47N227_FIRDMASELECT_MASK; | |
2575 | if (tmpbyte != (conf->fir_dma & LPC47N227_FIRDMASELECT_MASK)) { | |
2576 | IRDA_WARNING("ERROR: could not configure FIR DMA channel.\n"); | |
2577 | return -ENXIO; | |
2578 | } | |
2579 | ||
2580 | outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase); // CR0C - UART mode | |
2581 | tmpbyte = inb(iobase + 1); | |
08d09997 LW |
2582 | tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK | |
2583 | SMSCSIOFLAT_UART2MODE_VAL_IRDA; | |
c1e14a6e LW |
2584 | outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed |
2585 | ||
2586 | outb(LPC47N227_APMBOOTDRIVE_REG, iobase); // CR07 - Auto Pwr Mgt/boot drive sel | |
2587 | tmpbyte = inb(iobase + 1); | |
2588 | outb(tmpbyte | LPC47N227_UART2AUTOPWRDOWN_MASK, iobase + 1); // enable UART2 autopower down | |
2589 | ||
2590 | /* This one was not part of tosh1800 */ | |
2591 | outb(0x0a, iobase); // CR0a - ecp fifo / ir mux | |
2592 | tmpbyte = inb(iobase + 1); | |
2593 | outb(tmpbyte | 0x40, iobase + 1); // send active device to ir port | |
2594 | ||
2595 | outb(LPC47N227_UART12POWER_REG, iobase); // CR02 - UART 1,2 power | |
2596 | tmpbyte = inb(iobase + 1); | |
2597 | outb(tmpbyte | LPC47N227_UART2POWERDOWN_MASK, iobase + 1); // UART2 power up mode, UART1 power down | |
2598 | ||
2599 | outb(LPC47N227_FDCPOWERVALIDCONF_REG, iobase); // CR00 - FDC Power/valid config cycle | |
2600 | tmpbyte = inb(iobase + 1); | |
2601 | outb(tmpbyte | LPC47N227_VALID_MASK, iobase + 1); // valid config cycle done | |
2602 | ||
2603 | outb(LPC47N227_CFGEXITKEY, iobase); // Exit configuration | |
2604 | ||
2605 | return 0; | |
2606 | } | |
2607 | ||
08d09997 | 2608 | /* 82801CAM generic registers */ |
c1e14a6e LW |
2609 | #define VID 0x00 |
2610 | #define DID 0x02 | |
08d09997 LW |
2611 | #define PIRQ_A_D_ROUT 0x60 |
2612 | #define SIRQ_CNTL 0x64 | |
2613 | #define PIRQ_E_H_ROUT 0x68 | |
c1e14a6e | 2614 | #define PCI_DMA_C 0x90 |
08d09997 | 2615 | /* LPC-specific registers */ |
c1e14a6e | 2616 | #define COM_DEC 0xe0 |
08d09997 | 2617 | #define GEN1_DEC 0xe4 |
c1e14a6e LW |
2618 | #define LPC_EN 0xe6 |
2619 | #define GEN2_DEC 0xec | |
2620 | /* | |
08d09997 LW |
2621 | * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge |
2622 | * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. | |
2623 | * They all work the same way! | |
c1e14a6e | 2624 | */ |
948252cb | 2625 | static int __init preconfigure_through_82801(struct pci_dev *dev, |
08d09997 LW |
2626 | struct |
2627 | smsc_ircc_subsystem_configuration | |
2628 | *conf) | |
c1e14a6e LW |
2629 | { |
2630 | unsigned short tmpword; | |
08d09997 | 2631 | unsigned char tmpbyte; |
c1e14a6e | 2632 | |
08d09997 LW |
2633 | IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n"); |
2634 | /* | |
2635 | * Select the range for the COMA COM port (SIR) | |
2636 | * Register COM_DEC: | |
2637 | * Bit 7: reserved | |
2638 | * Bit 6-4, COMB decode range | |
2639 | * Bit 3: reserved | |
2640 | * Bit 2-0, COMA decode range | |
2641 | * | |
2642 | * Decode ranges: | |
2643 | * 000 = 0x3f8-0x3ff (COM1) | |
2644 | * 001 = 0x2f8-0x2ff (COM2) | |
2645 | * 010 = 0x220-0x227 | |
2646 | * 011 = 0x228-0x22f | |
2647 | * 100 = 0x238-0x23f | |
2648 | * 101 = 0x2e8-0x2ef (COM4) | |
2649 | * 110 = 0x338-0x33f | |
2650 | * 111 = 0x3e8-0x3ef (COM3) | |
2651 | */ | |
2652 | pci_read_config_byte(dev, COM_DEC, &tmpbyte); | |
2653 | tmpbyte &= 0xf8; /* mask COMA bits */ | |
2654 | switch(conf->sir_io) { | |
2655 | case 0x3f8: | |
2656 | tmpbyte |= 0x00; | |
2657 | break; | |
2658 | case 0x2f8: | |
2659 | tmpbyte |= 0x01; | |
2660 | break; | |
2661 | case 0x220: | |
2662 | tmpbyte |= 0x02; | |
2663 | break; | |
2664 | case 0x228: | |
2665 | tmpbyte |= 0x03; | |
2666 | break; | |
2667 | case 0x238: | |
2668 | tmpbyte |= 0x04; | |
2669 | break; | |
2670 | case 0x2e8: | |
2671 | tmpbyte |= 0x05; | |
2672 | break; | |
2673 | case 0x338: | |
2674 | tmpbyte |= 0x06; | |
2675 | break; | |
2676 | case 0x3e8: | |
2677 | tmpbyte |= 0x07; | |
2678 | break; | |
2679 | default: | |
2680 | tmpbyte |= 0x01; /* COM2 default */ | |
2681 | } | |
2682 | IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte); | |
2683 | pci_write_config_byte(dev, COM_DEC, tmpbyte); | |
c1e14a6e | 2684 | |
08d09997 LW |
2685 | /* Enable Low Pin Count interface */ |
2686 | pci_read_config_word(dev, LPC_EN, &tmpword); | |
2687 | /* These seem to be set up at all times, | |
2688 | * just make sure it is properly set. | |
2689 | */ | |
2690 | switch(conf->cfg_base) { | |
2691 | case 0x04e: | |
2692 | tmpword |= 0x2000; | |
2693 | break; | |
2694 | case 0x02e: | |
2695 | tmpword |= 0x1000; | |
2696 | break; | |
2697 | case 0x062: | |
2698 | tmpword |= 0x0800; | |
2699 | break; | |
2700 | case 0x060: | |
2701 | tmpword |= 0x0400; | |
2702 | break; | |
2703 | default: | |
2704 | IRDA_WARNING("Uncommon I/O base address: 0x%04x\n", | |
2705 | conf->cfg_base); | |
2706 | break; | |
2707 | } | |
2708 | tmpword &= 0xfffd; /* disable LPC COMB */ | |
2709 | tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */ | |
2710 | IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword); | |
c1e14a6e LW |
2711 | pci_write_config_word(dev, LPC_EN, tmpword); |
2712 | ||
08d09997 LW |
2713 | /* |
2714 | * Configure LPC DMA channel | |
2715 | * PCI_DMA_C bits: | |
2716 | * Bit 15-14: DMA channel 7 select | |
2717 | * Bit 13-12: DMA channel 6 select | |
2718 | * Bit 11-10: DMA channel 5 select | |
2719 | * Bit 9-8: Reserved | |
2720 | * Bit 7-6: DMA channel 3 select | |
2721 | * Bit 5-4: DMA channel 2 select | |
2722 | * Bit 3-2: DMA channel 1 select | |
2723 | * Bit 1-0: DMA channel 0 select | |
2724 | * 00 = Reserved value | |
2725 | * 01 = PC/PCI DMA | |
2726 | * 10 = Reserved value | |
2727 | * 11 = LPC I/F DMA | |
2728 | */ | |
2729 | pci_read_config_word(dev, PCI_DMA_C, &tmpword); | |
2730 | switch(conf->fir_dma) { | |
2731 | case 0x07: | |
2732 | tmpword |= 0xc000; | |
2733 | break; | |
2734 | case 0x06: | |
2735 | tmpword |= 0x3000; | |
2736 | break; | |
2737 | case 0x05: | |
2738 | tmpword |= 0x0c00; | |
2739 | break; | |
2740 | case 0x03: | |
2741 | tmpword |= 0x00c0; | |
2742 | break; | |
2743 | case 0x02: | |
2744 | tmpword |= 0x0030; | |
2745 | break; | |
2746 | case 0x01: | |
2747 | tmpword |= 0x000c; | |
2748 | break; | |
2749 | case 0x00: | |
2750 | tmpword |= 0x0003; | |
2751 | break; | |
2752 | default: | |
2753 | break; /* do not change settings */ | |
2754 | } | |
2755 | IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword); | |
2756 | pci_write_config_word(dev, PCI_DMA_C, tmpword); | |
2757 | ||
2758 | /* | |
2759 | * GEN2_DEC bits: | |
2760 | * Bit 15-4: Generic I/O range | |
2761 | * Bit 3-1: reserved (read as 0) | |
2762 | * Bit 0: enable GEN2 range on LPC I/F | |
2763 | */ | |
2764 | tmpword = conf->fir_io & 0xfff8; | |
2765 | tmpword |= 0x0001; | |
2766 | IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword); | |
2767 | pci_write_config_word(dev, GEN2_DEC, tmpword); | |
c1e14a6e LW |
2768 | |
2769 | /* Pre-configure chip */ | |
08d09997 LW |
2770 | return preconfigure_smsc_chip(conf); |
2771 | } | |
c1e14a6e | 2772 | |
08d09997 LW |
2773 | /* |
2774 | * Pre-configure a certain port on the ALi 1533 bridge. | |
2775 | * This is based on reverse-engineering since ALi does not | |
2776 | * provide any data sheet for the 1533 chip. | |
2777 | */ | |
948252cb | 2778 | static void __init preconfigure_ali_port(struct pci_dev *dev, |
08d09997 LW |
2779 | unsigned short port) |
2780 | { | |
2781 | unsigned char reg; | |
2782 | /* These bits obviously control the different ports */ | |
2783 | unsigned char mask; | |
2784 | unsigned char tmpbyte; | |
2785 | ||
2786 | switch(port) { | |
2787 | case 0x0130: | |
2788 | case 0x0178: | |
2789 | reg = 0xb0; | |
2790 | mask = 0x80; | |
2791 | break; | |
2792 | case 0x03f8: | |
2793 | reg = 0xb4; | |
2794 | mask = 0x80; | |
2795 | break; | |
2796 | case 0x02f8: | |
2797 | reg = 0xb4; | |
2798 | mask = 0x30; | |
2799 | break; | |
2800 | case 0x02e8: | |
2801 | reg = 0xb4; | |
2802 | mask = 0x08; | |
2803 | break; | |
2804 | default: | |
2805 | IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port); | |
2806 | return; | |
2807 | } | |
2808 | ||
2809 | pci_read_config_byte(dev, reg, &tmpbyte); | |
2810 | /* Turn on the right bits */ | |
2811 | tmpbyte |= mask; | |
2812 | pci_write_config_byte(dev, reg, tmpbyte); | |
2813 | IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port); | |
c1e14a6e LW |
2814 | } |
2815 | ||
948252cb | 2816 | static int __init preconfigure_through_ali(struct pci_dev *dev, |
08d09997 LW |
2817 | struct |
2818 | smsc_ircc_subsystem_configuration | |
2819 | *conf) | |
c1e14a6e | 2820 | { |
08d09997 LW |
2821 | /* Configure the two ports on the ALi 1533 */ |
2822 | preconfigure_ali_port(dev, conf->sir_io); | |
2823 | preconfigure_ali_port(dev, conf->fir_io); | |
2824 | ||
2825 | /* Pre-configure chip */ | |
2826 | return preconfigure_smsc_chip(conf); | |
c1e14a6e LW |
2827 | } |
2828 | ||
948252cb | 2829 | static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, |
c1e14a6e LW |
2830 | unsigned short ircc_fir, |
2831 | unsigned short ircc_sir, | |
2832 | unsigned char ircc_dma, | |
2833 | unsigned char ircc_irq) | |
2834 | { | |
2835 | struct pci_dev *dev = NULL; | |
2836 | unsigned short ss_vendor = 0x0000; | |
2837 | unsigned short ss_device = 0x0000; | |
2838 | int ret = 0; | |
2839 | ||
2e4e7a97 | 2840 | for_each_pci_dev(dev) { |
948252cb | 2841 | struct smsc_ircc_subsystem_configuration *conf; |
c1e14a6e LW |
2842 | |
2843 | /* | |
08d09997 LW |
2844 | * Cache the subsystem vendor/device: |
2845 | * some manufacturers fail to set this for all components, | |
2846 | * so we save it in case there is just 0x0000 0x0000 on the | |
2847 | * device we want to check. | |
c1e14a6e LW |
2848 | */ |
2849 | if (dev->subsystem_vendor != 0x0000U) { | |
2850 | ss_vendor = dev->subsystem_vendor; | |
2851 | ss_device = dev->subsystem_device; | |
2852 | } | |
2853 | conf = subsystem_configurations; | |
2854 | for( ; conf->subvendor; conf++) { | |
2855 | if(conf->vendor == dev->vendor && | |
2856 | conf->device == dev->device && | |
08d09997 LW |
2857 | conf->subvendor == ss_vendor && |
2858 | /* Sometimes these are cached values */ | |
2859 | (conf->subdevice == ss_device || | |
2860 | conf->subdevice == 0xffff)) { | |
2861 | struct smsc_ircc_subsystem_configuration | |
2862 | tmpconf; | |
c1e14a6e | 2863 | |
08d09997 LW |
2864 | memcpy(&tmpconf, conf, |
2865 | sizeof(struct smsc_ircc_subsystem_configuration)); | |
c1e14a6e | 2866 | |
08d09997 LW |
2867 | /* |
2868 | * Override the default values with anything | |
2869 | * passed in as parameter | |
2870 | */ | |
c1e14a6e LW |
2871 | if (ircc_cfg != 0) |
2872 | tmpconf.cfg_base = ircc_cfg; | |
2873 | if (ircc_fir != 0) | |
2874 | tmpconf.fir_io = ircc_fir; | |
2875 | if (ircc_sir != 0) | |
2876 | tmpconf.sir_io = ircc_sir; | |
916f11c7 | 2877 | if (ircc_dma != DMA_INVAL) |
c1e14a6e | 2878 | tmpconf.fir_dma = ircc_dma; |
916f11c7 | 2879 | if (ircc_irq != IRQ_INVAL) |
c1e14a6e LW |
2880 | tmpconf.fir_irq = ircc_irq; |
2881 | ||
2882 | IRDA_MESSAGE("Detected unconfigured %s SMSC IrDA chip, pre-configuring device.\n", conf->name); | |
2883 | if (conf->preconfigure) | |
2884 | ret = conf->preconfigure(dev, &tmpconf); | |
2885 | else | |
2886 | ret = -ENODEV; | |
2887 | } | |
2888 | } | |
c1e14a6e LW |
2889 | } |
2890 | ||
2891 | return ret; | |
2892 | } | |
2893 | #endif // CONFIG_PCI | |
2894 | ||
1da177e4 LT |
2895 | /************************************************ |
2896 | * | |
2897 | * Transceivers specific functions | |
2898 | * | |
2899 | ************************************************/ | |
2900 | ||
2901 | ||
2902 | /* | |
2903 | * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed) | |
2904 | * | |
2905 | * Program transceiver through smsc-ircc ATC circuitry | |
2906 | * | |
2907 | */ | |
2908 | ||
2909 | static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed) | |
2910 | { | |
2911 | unsigned long jiffies_now, jiffies_timeout; | |
98b77773 | 2912 | u8 val; |
527b6af4 | 2913 | |
98b77773 DT |
2914 | jiffies_now = jiffies; |
2915 | jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES; | |
527b6af4 | 2916 | |
1da177e4 LT |
2917 | /* ATC */ |
2918 | register_bank(fir_base, 4); | |
98b77773 DT |
2919 | outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE, |
2920 | fir_base + IRCC_ATC); | |
2921 | ||
2922 | while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) && | |
2923 | !time_after(jiffies, jiffies_timeout)) | |
2924 | /* empty */; | |
2925 | ||
2926 | if (val) | |
a97a6f10 | 2927 | IRDA_WARNING("%s(): ATC: 0x%02x\n", __func__, |
98b77773 | 2928 | inb(fir_base + IRCC_ATC)); |
1da177e4 LT |
2929 | } |
2930 | ||
2931 | /* | |
2932 | * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base) | |
2933 | * | |
2934 | * Probe transceiver smsc-ircc ATC circuitry | |
2935 | * | |
2936 | */ | |
2937 | ||
2938 | static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base) | |
2939 | { | |
2940 | return 0; | |
2941 | } | |
2942 | ||
2943 | /* | |
2944 | * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed) | |
2945 | * | |
527b6af4 | 2946 | * Set transceiver |
1da177e4 LT |
2947 | * |
2948 | */ | |
2949 | ||
2950 | static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed) | |
2951 | { | |
98b77773 | 2952 | u8 fast_mode; |
527b6af4 | 2953 | |
98b77773 DT |
2954 | switch (speed) { |
2955 | default: | |
2956 | case 576000 : | |
527b6af4 | 2957 | fast_mode = 0; |
1da177e4 | 2958 | break; |
98b77773 DT |
2959 | case 1152000 : |
2960 | case 4000000 : | |
1da177e4 LT |
2961 | fast_mode = IRCC_LCR_A_FAST; |
2962 | break; | |
1da177e4 LT |
2963 | } |
2964 | register_bank(fir_base, 0); | |
98b77773 | 2965 | outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A); |
1da177e4 LT |
2966 | } |
2967 | ||
2968 | /* | |
2969 | * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base) | |
2970 | * | |
527b6af4 | 2971 | * Probe transceiver |
1da177e4 LT |
2972 | * |
2973 | */ | |
2974 | ||
2975 | static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base) | |
2976 | { | |
2977 | return 0; | |
2978 | } | |
2979 | ||
2980 | /* | |
2981 | * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed) | |
2982 | * | |
527b6af4 | 2983 | * Set transceiver |
1da177e4 LT |
2984 | * |
2985 | */ | |
2986 | ||
2987 | static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed) | |
2988 | { | |
98b77773 | 2989 | u8 fast_mode; |
527b6af4 | 2990 | |
98b77773 DT |
2991 | switch (speed) { |
2992 | default: | |
2993 | case 576000 : | |
527b6af4 | 2994 | fast_mode = 0; |
1da177e4 | 2995 | break; |
98b77773 DT |
2996 | case 1152000 : |
2997 | case 4000000 : | |
1da177e4 LT |
2998 | fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA; |
2999 | break; | |
527b6af4 | 3000 | |
1da177e4 LT |
3001 | } |
3002 | /* This causes an interrupt */ | |
3003 | register_bank(fir_base, 0); | |
98b77773 | 3004 | outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A); |
1da177e4 LT |
3005 | } |
3006 | ||
3007 | /* | |
3008 | * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base) | |
3009 | * | |
527b6af4 | 3010 | * Probe transceiver |
1da177e4 LT |
3011 | * |
3012 | */ | |
3013 | ||
3014 | static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base) | |
3015 | { | |
3016 | return 0; | |
3017 | } | |
3018 | ||
3019 | ||
3020 | module_init(smsc_ircc_init); | |
3021 | module_exit(smsc_ircc_cleanup); |