Commit | Line | Data |
---|---|---|
b2441318 | 1 | /* SPDX-License-Identifier: GPL-2.0 */ |
1da177e4 LT |
2 | |
3 | /* 8530 Serial Communications Controller Register definitions */ | |
4 | #define FLAG 0x7e | |
5 | ||
6 | /* Write Register 0 */ | |
7 | #define R0 0 /* Register selects */ | |
8 | #define R1 1 | |
9 | #define R2 2 | |
10 | #define R3 3 | |
11 | #define R4 4 | |
12 | #define R5 5 | |
13 | #define R6 6 | |
14 | #define R7 7 | |
15 | #define R8 8 | |
16 | #define R9 9 | |
17 | #define R10 10 | |
18 | #define R11 11 | |
19 | #define R12 12 | |
20 | #define R13 13 | |
21 | #define R14 14 | |
22 | #define R15 15 | |
23 | ||
24 | #define NULLCODE 0 /* Null Code */ | |
25 | #define POINT_HIGH 0x8 /* Select upper half of registers */ | |
26 | #define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ | |
27 | #define SEND_ABORT 0x18 /* HDLC Abort */ | |
28 | #define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ | |
29 | #define RES_Tx_P 0x28 /* Reset TxINT Pending */ | |
30 | #define ERR_RES 0x30 /* Error Reset */ | |
31 | #define RES_H_IUS 0x38 /* Reset highest IUS */ | |
32 | ||
33 | #define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ | |
34 | #define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ | |
35 | #define RES_EOM_L 0xC0 /* Reset EOM latch */ | |
36 | ||
37 | /* Write Register 1 */ | |
38 | ||
39 | #define EXT_INT_ENAB 0x1 /* Ext Int Enable */ | |
40 | #define TxINT_ENAB 0x2 /* Tx Int Enable */ | |
41 | #define PAR_SPEC 0x4 /* Parity is special condition */ | |
42 | ||
43 | #define RxINT_DISAB 0 /* Rx Int Disable */ | |
44 | #define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ | |
45 | #define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ | |
46 | #define INT_ERR_Rx 0x18 /* Int on error only */ | |
47 | ||
48 | #define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ | |
49 | #define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ | |
50 | #define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ | |
51 | ||
52 | /* Write Register #2 (Interrupt Vector) */ | |
53 | ||
54 | /* Write Register 3 */ | |
55 | ||
56 | #define RxENABLE 0x1 /* Rx Enable */ | |
57 | #define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ | |
58 | #define ADD_SM 0x4 /* Address Search Mode (SDLC) */ | |
59 | #define RxCRC_ENAB 0x8 /* Rx CRC Enable */ | |
60 | #define ENT_HM 0x10 /* Enter Hunt Mode */ | |
61 | #define AUTO_ENAB 0x20 /* Auto Enables */ | |
62 | #define Rx5 0x0 /* Rx 5 Bits/Character */ | |
63 | #define Rx7 0x40 /* Rx 7 Bits/Character */ | |
64 | #define Rx6 0x80 /* Rx 6 Bits/Character */ | |
65 | #define Rx8 0xc0 /* Rx 8 Bits/Character */ | |
66 | ||
67 | /* Write Register 4 */ | |
68 | ||
69 | #define PAR_ENA 0x1 /* Parity Enable */ | |
70 | #define PAR_EVEN 0x2 /* Parity Even/Odd* */ | |
71 | ||
72 | #define SYNC_ENAB 0 /* Sync Modes Enable */ | |
73 | #define SB1 0x4 /* 1 stop bit/char */ | |
74 | #define SB15 0x8 /* 1.5 stop bits/char */ | |
75 | #define SB2 0xc /* 2 stop bits/char */ | |
76 | ||
77 | #define MONSYNC 0 /* 8 Bit Sync character */ | |
78 | #define BISYNC 0x10 /* 16 bit sync character */ | |
79 | #define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ | |
80 | #define EXTSYNC 0x30 /* External Sync Mode */ | |
81 | ||
82 | #define X1CLK 0x0 /* x1 clock mode */ | |
83 | #define X16CLK 0x40 /* x16 clock mode */ | |
84 | #define X32CLK 0x80 /* x32 clock mode */ | |
85 | #define X64CLK 0xC0 /* x64 clock mode */ | |
86 | ||
87 | /* Write Register 5 */ | |
88 | ||
89 | #define TxCRC_ENAB 0x1 /* Tx CRC Enable */ | |
90 | #define RTS 0x2 /* RTS */ | |
91 | #define SDLC_CRC 0x4 /* SDLC/CRC-16 */ | |
92 | #define TxENAB 0x8 /* Tx Enable */ | |
93 | #define SND_BRK 0x10 /* Send Break */ | |
94 | #define Tx5 0x0 /* Tx 5 bits (or less)/character */ | |
95 | #define Tx7 0x20 /* Tx 7 bits/character */ | |
96 | #define Tx6 0x40 /* Tx 6 bits/character */ | |
97 | #define Tx8 0x60 /* Tx 8 bits/character */ | |
98 | #define DTR 0x80 /* DTR */ | |
99 | ||
100 | /* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ | |
101 | ||
102 | /* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ | |
103 | ||
104 | /* Write Register 8 (transmit buffer) */ | |
105 | ||
106 | /* Write Register 9 (Master interrupt control) */ | |
107 | #define VIS 1 /* Vector Includes Status */ | |
108 | #define NV 2 /* No Vector */ | |
109 | #define DLC 4 /* Disable Lower Chain */ | |
110 | #define MIE 8 /* Master Interrupt Enable */ | |
111 | #define STATHI 0x10 /* Status high */ | |
112 | #define NORESET 0 /* No reset on write to R9 */ | |
113 | #define CHRB 0x40 /* Reset channel B */ | |
114 | #define CHRA 0x80 /* Reset channel A */ | |
115 | #define FHWRES 0xc0 /* Force hardware reset */ | |
116 | ||
117 | /* Write Register 10 (misc control bits) */ | |
118 | #define BIT6 1 /* 6 bit/8bit sync */ | |
119 | #define LOOPMODE 2 /* SDLC Loop mode */ | |
120 | #define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ | |
121 | #define MARKIDLE 8 /* Mark/flag on idle */ | |
122 | #define GAOP 0x10 /* Go active on poll */ | |
123 | #define NRZ 0 /* NRZ mode */ | |
124 | #define NRZI 0x20 /* NRZI mode */ | |
125 | #define FM1 0x40 /* FM1 (transition = 1) */ | |
126 | #define FM0 0x60 /* FM0 (transition = 0) */ | |
127 | #define CRCPS 0x80 /* CRC Preset I/O */ | |
128 | ||
129 | /* Write Register 11 (Clock Mode control) */ | |
130 | #define TRxCXT 0 /* TRxC = Xtal output */ | |
131 | #define TRxCTC 1 /* TRxC = Transmit clock */ | |
132 | #define TRxCBR 2 /* TRxC = BR Generator Output */ | |
133 | #define TRxCDP 3 /* TRxC = DPLL output */ | |
134 | #define TRxCOI 4 /* TRxC O/I */ | |
135 | #define TCRTxCP 0 /* Transmit clock = RTxC pin */ | |
136 | #define TCTRxCP 8 /* Transmit clock = TRxC pin */ | |
137 | #define TCBR 0x10 /* Transmit clock = BR Generator output */ | |
138 | #define TCDPLL 0x18 /* Transmit clock = DPLL output */ | |
139 | #define RCRTxCP 0 /* Receive clock = RTxC pin */ | |
140 | #define RCTRxCP 0x20 /* Receive clock = TRxC pin */ | |
141 | #define RCBR 0x40 /* Receive clock = BR Generator output */ | |
142 | #define RCDPLL 0x60 /* Receive clock = DPLL output */ | |
143 | #define RTxCX 0x80 /* RTxC Xtal/No Xtal */ | |
144 | ||
145 | /* Write Register 12 (lower byte of baud rate generator time constant) */ | |
146 | ||
147 | /* Write Register 13 (upper byte of baud rate generator time constant) */ | |
148 | ||
149 | /* Write Register 14 (Misc control bits) */ | |
150 | #define BRENABL 1 /* Baud rate generator enable */ | |
151 | #define BRSRC 2 /* Baud rate generator source */ | |
152 | #define DTRREQ 4 /* DTR/Request function */ | |
153 | #define AUTOECHO 8 /* Auto Echo */ | |
154 | #define LOOPBAK 0x10 /* Local loopback */ | |
155 | #define SEARCH 0x20 /* Enter search mode */ | |
156 | #define RMC 0x40 /* Reset missing clock */ | |
157 | #define DISDPLL 0x60 /* Disable DPLL */ | |
158 | #define SSBR 0x80 /* Set DPLL source = BR generator */ | |
159 | #define SSRTxC 0xa0 /* Set DPLL source = RTxC */ | |
160 | #define SFMM 0xc0 /* Set FM mode */ | |
161 | #define SNRZI 0xe0 /* Set NRZI mode */ | |
162 | ||
163 | /* Write Register 15 (external/status interrupt control) */ | |
164 | #define ZCIE 2 /* Zero count IE */ | |
165 | #define DCDIE 8 /* DCD IE */ | |
166 | #define SYNCIE 0x10 /* Sync/hunt IE */ | |
167 | #define CTSIE 0x20 /* CTS IE */ | |
168 | #define TxUIE 0x40 /* Tx Underrun/EOM IE */ | |
169 | #define BRKIE 0x80 /* Break/Abort IE */ | |
170 | ||
171 | ||
172 | /* Read Register 0 */ | |
173 | #define Rx_CH_AV 0x1 /* Rx Character Available */ | |
174 | #define ZCOUNT 0x2 /* Zero count */ | |
175 | #define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ | |
176 | #define DCD 0x8 /* DCD */ | |
177 | #define SYNC_HUNT 0x10 /* Sync/hunt */ | |
178 | #define CTS 0x20 /* CTS */ | |
179 | #define TxEOM 0x40 /* Tx underrun */ | |
180 | #define BRK_ABRT 0x80 /* Break/Abort */ | |
181 | ||
182 | /* Read Register 1 */ | |
183 | #define ALL_SNT 0x1 /* All sent */ | |
184 | /* Residue Data for 8 Rx bits/char programmed */ | |
185 | #define RES3 0x8 /* 0/3 */ | |
186 | #define RES4 0x4 /* 0/4 */ | |
187 | #define RES5 0xc /* 0/5 */ | |
188 | #define RES6 0x2 /* 0/6 */ | |
189 | #define RES7 0xa /* 0/7 */ | |
190 | #define RES8 0x6 /* 0/8 */ | |
191 | #define RES18 0xe /* 1/8 */ | |
192 | #define RES28 0x0 /* 2/8 */ | |
193 | /* Special Rx Condition Interrupts */ | |
194 | #define PAR_ERR 0x10 /* Parity error */ | |
195 | #define Rx_OVR 0x20 /* Rx Overrun Error */ | |
196 | #define CRC_ERR 0x40 /* CRC/Framing Error */ | |
197 | #define END_FR 0x80 /* End of Frame (SDLC) */ | |
198 | ||
199 | /* Read Register 2 (channel b only) - Interrupt vector */ | |
200 | ||
201 | /* Read Register 3 (interrupt pending register) ch a only */ | |
202 | #define CHBEXT 0x1 /* Channel B Ext/Stat IP */ | |
203 | #define CHBTxIP 0x2 /* Channel B Tx IP */ | |
204 | #define CHBRxIP 0x4 /* Channel B Rx IP */ | |
205 | #define CHAEXT 0x8 /* Channel A Ext/Stat IP */ | |
206 | #define CHATxIP 0x10 /* Channel A Tx IP */ | |
207 | #define CHARxIP 0x20 /* Channel A Rx IP */ | |
208 | ||
209 | /* Read Register 8 (receive data register) */ | |
210 | ||
211 | /* Read Register 10 (misc status bits) */ | |
212 | #define ONLOOP 2 /* On loop */ | |
213 | #define LOOPSEND 0x10 /* Loop sending */ | |
214 | #define CLK2MIS 0x40 /* Two clocks missing */ | |
215 | #define CLK1MIS 0x80 /* One clock missing */ | |
216 | ||
217 | /* Read Register 12 (lower byte of baud rate generator constant) */ | |
218 | ||
219 | /* Read Register 13 (upper byte of baud rate generator constant) */ | |
220 | ||
221 | /* Read Register 15 (value of WR 15) */ | |
222 | ||
223 | /* Z85C30/Z85230 Enhanced SCC register definitions */ | |
224 | ||
225 | /* Write Register 7' (SDLC/HDLC Programmable Enhancements) */ | |
226 | #define AUTOTXF 0x01 /* Auto Tx Flag */ | |
227 | #define AUTOEOM 0x02 /* Auto EOM Latch Reset */ | |
228 | #define AUTORTS 0x04 /* Auto RTS */ | |
229 | #define TXDNRZI 0x08 /* TxD Pulled High in SDLC NRZI mode */ | |
230 | #define RXFIFOH 0x08 /* Z85230: Int on RX FIFO half full */ | |
231 | #define FASTDTR 0x10 /* Fast DTR/REQ Mode */ | |
232 | #define CRCCBCR 0x20 /* CRC Check Bytes Completely Received */ | |
233 | #define TXFIFOE 0x20 /* Z85230: Int on TX FIFO completely empty */ | |
234 | #define EXTRDEN 0x40 /* Extended Read Enabled */ | |
235 | ||
236 | /* Write Register 15 (external/status interrupt control) */ | |
237 | #define SHDLCE 1 /* SDLC/HDLC Enhancements Enable */ | |
238 | #define FIFOE 4 /* FIFO Enable */ | |
239 | ||
240 | /* Read Register 6 (frame status FIFO) */ | |
241 | #define BCLSB 0xff /* LSB of 14 bits count */ | |
242 | ||
243 | /* Read Register 7 (frame status FIFO) */ | |
244 | #define BCMSB 0x3f /* MSB of 14 bits count */ | |
245 | #define FDA 0x40 /* FIFO Data Available Status */ | |
246 | #define FOS 0x80 /* FIFO Overflow Status */ |