Commit | Line | Data |
---|---|---|
0bbaf069 | 1 | /* |
1da177e4 LT |
2 | * drivers/net/gianfar.c |
3 | * | |
4 | * Gianfar Ethernet Driver | |
7f7f5316 AF |
5 | * This driver is designed for the non-CPM ethernet controllers |
6 | * on the 85xx and 83xx family of integrated processors | |
1da177e4 LT |
7 | * Based on 8260_io/fcc_enet.c |
8 | * | |
9 | * Author: Andy Fleming | |
4c8d3d99 | 10 | * Maintainer: Kumar Gala |
1da177e4 | 11 | * |
e8a2b6a4 | 12 | * Copyright (c) 2002-2006 Freescale Semiconductor, Inc. |
538cc7ee | 13 | * Copyright (c) 2007 MontaVista Software, Inc. |
1da177e4 LT |
14 | * |
15 | * This program is free software; you can redistribute it and/or modify it | |
16 | * under the terms of the GNU General Public License as published by the | |
17 | * Free Software Foundation; either version 2 of the License, or (at your | |
18 | * option) any later version. | |
19 | * | |
20 | * Gianfar: AKA Lambda Draconis, "Dragon" | |
21 | * RA 11 31 24.2 | |
22 | * Dec +69 19 52 | |
23 | * V 3.84 | |
24 | * B-V +1.62 | |
25 | * | |
26 | * Theory of operation | |
0bbaf069 | 27 | * |
1da177e4 LT |
28 | * The driver is initialized through platform_device. Structures which |
29 | * define the configuration needed by the board are defined in a | |
30 | * board structure in arch/ppc/platforms (though I do not | |
31 | * discount the possibility that other architectures could one | |
bb40dcbb | 32 | * day be supported. |
1da177e4 LT |
33 | * |
34 | * The Gianfar Ethernet Controller uses a ring of buffer | |
35 | * descriptors. The beginning is indicated by a register | |
0bbaf069 KG |
36 | * pointing to the physical address of the start of the ring. |
37 | * The end is determined by a "wrap" bit being set in the | |
1da177e4 LT |
38 | * last descriptor of the ring. |
39 | * | |
40 | * When a packet is received, the RXF bit in the | |
0bbaf069 | 41 | * IEVENT register is set, triggering an interrupt when the |
1da177e4 LT |
42 | * corresponding bit in the IMASK register is also set (if |
43 | * interrupt coalescing is active, then the interrupt may not | |
44 | * happen immediately, but will wait until either a set number | |
bb40dcbb | 45 | * of frames or amount of time have passed). In NAPI, the |
1da177e4 LT |
46 | * interrupt handler will signal there is work to be done, and |
47 | * exit. Without NAPI, the packet(s) will be handled | |
48 | * immediately. Both methods will start at the last known empty | |
0bbaf069 | 49 | * descriptor, and process every subsequent descriptor until there |
1da177e4 LT |
50 | * are none left with data (NAPI will stop after a set number of |
51 | * packets to give time to other tasks, but will eventually | |
52 | * process all the packets). The data arrives inside a | |
53 | * pre-allocated skb, and so after the skb is passed up to the | |
54 | * stack, a new skb must be allocated, and the address field in | |
55 | * the buffer descriptor must be updated to indicate this new | |
56 | * skb. | |
57 | * | |
58 | * When the kernel requests that a packet be transmitted, the | |
59 | * driver starts where it left off last time, and points the | |
60 | * descriptor at the buffer which was passed in. The driver | |
61 | * then informs the DMA engine that there are packets ready to | |
62 | * be transmitted. Once the controller is finished transmitting | |
63 | * the packet, an interrupt may be triggered (under the same | |
64 | * conditions as for reception, but depending on the TXF bit). | |
65 | * The driver then cleans up the buffer. | |
66 | */ | |
67 | ||
1da177e4 | 68 | #include <linux/kernel.h> |
1da177e4 LT |
69 | #include <linux/string.h> |
70 | #include <linux/errno.h> | |
bb40dcbb | 71 | #include <linux/unistd.h> |
1da177e4 LT |
72 | #include <linux/slab.h> |
73 | #include <linux/interrupt.h> | |
74 | #include <linux/init.h> | |
75 | #include <linux/delay.h> | |
76 | #include <linux/netdevice.h> | |
77 | #include <linux/etherdevice.h> | |
78 | #include <linux/skbuff.h> | |
0bbaf069 | 79 | #include <linux/if_vlan.h> |
1da177e4 LT |
80 | #include <linux/spinlock.h> |
81 | #include <linux/mm.h> | |
d052d1be | 82 | #include <linux/platform_device.h> |
0bbaf069 KG |
83 | #include <linux/ip.h> |
84 | #include <linux/tcp.h> | |
85 | #include <linux/udp.h> | |
9c07b884 | 86 | #include <linux/in.h> |
1da177e4 LT |
87 | |
88 | #include <asm/io.h> | |
89 | #include <asm/irq.h> | |
90 | #include <asm/uaccess.h> | |
91 | #include <linux/module.h> | |
1da177e4 LT |
92 | #include <linux/dma-mapping.h> |
93 | #include <linux/crc32.h> | |
bb40dcbb AF |
94 | #include <linux/mii.h> |
95 | #include <linux/phy.h> | |
1da177e4 LT |
96 | |
97 | #include "gianfar.h" | |
bb40dcbb | 98 | #include "gianfar_mii.h" |
1da177e4 LT |
99 | |
100 | #define TX_TIMEOUT (1*HZ) | |
101 | #define SKB_ALLOC_TIMEOUT 1000000 | |
102 | #undef BRIEF_GFAR_ERRORS | |
103 | #undef VERBOSE_GFAR_ERRORS | |
104 | ||
105 | #ifdef CONFIG_GFAR_NAPI | |
106 | #define RECEIVE(x) netif_receive_skb(x) | |
107 | #else | |
108 | #define RECEIVE(x) netif_rx(x) | |
109 | #endif | |
110 | ||
111 | const char gfar_driver_name[] = "Gianfar Ethernet"; | |
7f7f5316 | 112 | const char gfar_driver_version[] = "1.3"; |
1da177e4 | 113 | |
1da177e4 LT |
114 | static int gfar_enet_open(struct net_device *dev); |
115 | static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev); | |
116 | static void gfar_timeout(struct net_device *dev); | |
117 | static int gfar_close(struct net_device *dev); | |
118 | struct sk_buff *gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp); | |
1da177e4 LT |
119 | static int gfar_set_mac_address(struct net_device *dev); |
120 | static int gfar_change_mtu(struct net_device *dev, int new_mtu); | |
7d12e780 DH |
121 | static irqreturn_t gfar_error(int irq, void *dev_id); |
122 | static irqreturn_t gfar_transmit(int irq, void *dev_id); | |
123 | static irqreturn_t gfar_interrupt(int irq, void *dev_id); | |
1da177e4 LT |
124 | static void adjust_link(struct net_device *dev); |
125 | static void init_registers(struct net_device *dev); | |
126 | static int init_phy(struct net_device *dev); | |
3ae5eaec RK |
127 | static int gfar_probe(struct platform_device *pdev); |
128 | static int gfar_remove(struct platform_device *pdev); | |
bb40dcbb | 129 | static void free_skb_resources(struct gfar_private *priv); |
1da177e4 LT |
130 | static void gfar_set_multi(struct net_device *dev); |
131 | static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); | |
d3c12873 KJ |
132 | static void gfar_configure_serdes(struct net_device *dev); |
133 | extern int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, int regnum, u16 value); | |
134 | extern int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum); | |
1da177e4 | 135 | #ifdef CONFIG_GFAR_NAPI |
bea3348e | 136 | static int gfar_poll(struct napi_struct *napi, int budget); |
1da177e4 | 137 | #endif |
f2d71c2d VW |
138 | #ifdef CONFIG_NET_POLL_CONTROLLER |
139 | static void gfar_netpoll(struct net_device *dev); | |
140 | #endif | |
0bbaf069 | 141 | int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); |
1da177e4 | 142 | static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length); |
0bbaf069 KG |
143 | static void gfar_vlan_rx_register(struct net_device *netdev, |
144 | struct vlan_group *grp); | |
7f7f5316 AF |
145 | void gfar_halt(struct net_device *dev); |
146 | void gfar_start(struct net_device *dev); | |
147 | static void gfar_clear_exact_match(struct net_device *dev); | |
148 | static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr); | |
1da177e4 | 149 | |
7282d491 | 150 | extern const struct ethtool_ops gfar_ethtool_ops; |
1da177e4 LT |
151 | |
152 | MODULE_AUTHOR("Freescale Semiconductor, Inc"); | |
153 | MODULE_DESCRIPTION("Gianfar Ethernet Driver"); | |
154 | MODULE_LICENSE("GPL"); | |
155 | ||
7f7f5316 AF |
156 | /* Returns 1 if incoming frames use an FCB */ |
157 | static inline int gfar_uses_fcb(struct gfar_private *priv) | |
0bbaf069 | 158 | { |
7f7f5316 | 159 | return (priv->vlan_enable || priv->rx_csum_enable); |
0bbaf069 | 160 | } |
bb40dcbb AF |
161 | |
162 | /* Set up the ethernet device structure, private data, | |
163 | * and anything else we need before we start */ | |
3ae5eaec | 164 | static int gfar_probe(struct platform_device *pdev) |
1da177e4 LT |
165 | { |
166 | u32 tempval; | |
167 | struct net_device *dev = NULL; | |
168 | struct gfar_private *priv = NULL; | |
1da177e4 LT |
169 | struct gianfar_platform_data *einfo; |
170 | struct resource *r; | |
171 | int idx; | |
172 | int err = 0; | |
0795af57 | 173 | DECLARE_MAC_BUF(mac); |
1da177e4 LT |
174 | |
175 | einfo = (struct gianfar_platform_data *) pdev->dev.platform_data; | |
176 | ||
bb40dcbb | 177 | if (NULL == einfo) { |
1da177e4 LT |
178 | printk(KERN_ERR "gfar %d: Missing additional data!\n", |
179 | pdev->id); | |
180 | ||
181 | return -ENODEV; | |
182 | } | |
183 | ||
184 | /* Create an ethernet device instance */ | |
185 | dev = alloc_etherdev(sizeof (*priv)); | |
186 | ||
bb40dcbb | 187 | if (NULL == dev) |
1da177e4 LT |
188 | return -ENOMEM; |
189 | ||
190 | priv = netdev_priv(dev); | |
bea3348e | 191 | priv->dev = dev; |
1da177e4 LT |
192 | |
193 | /* Set the info in the priv to the current info */ | |
194 | priv->einfo = einfo; | |
195 | ||
196 | /* fill out IRQ fields */ | |
197 | if (einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { | |
198 | priv->interruptTransmit = platform_get_irq_byname(pdev, "tx"); | |
199 | priv->interruptReceive = platform_get_irq_byname(pdev, "rx"); | |
200 | priv->interruptError = platform_get_irq_byname(pdev, "error"); | |
48944738 DV |
201 | if (priv->interruptTransmit < 0 || priv->interruptReceive < 0 || priv->interruptError < 0) |
202 | goto regs_fail; | |
1da177e4 LT |
203 | } else { |
204 | priv->interruptTransmit = platform_get_irq(pdev, 0); | |
48944738 DV |
205 | if (priv->interruptTransmit < 0) |
206 | goto regs_fail; | |
1da177e4 LT |
207 | } |
208 | ||
209 | /* get a pointer to the register memory */ | |
210 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
cc8c6e37 | 211 | priv->regs = ioremap(r->start, sizeof (struct gfar)); |
1da177e4 | 212 | |
bb40dcbb | 213 | if (NULL == priv->regs) { |
1da177e4 LT |
214 | err = -ENOMEM; |
215 | goto regs_fail; | |
216 | } | |
217 | ||
fef6108d AF |
218 | spin_lock_init(&priv->txlock); |
219 | spin_lock_init(&priv->rxlock); | |
1da177e4 | 220 | |
3ae5eaec | 221 | platform_set_drvdata(pdev, dev); |
1da177e4 LT |
222 | |
223 | /* Stop the DMA engine now, in case it was running before */ | |
224 | /* (The firmware could have used it, and left it running). */ | |
225 | /* To do this, we write Graceful Receive Stop and Graceful */ | |
226 | /* Transmit Stop, and then wait until the corresponding bits */ | |
227 | /* in IEVENT indicate the stops have completed. */ | |
228 | tempval = gfar_read(&priv->regs->dmactrl); | |
229 | tempval &= ~(DMACTRL_GRS | DMACTRL_GTS); | |
230 | gfar_write(&priv->regs->dmactrl, tempval); | |
231 | ||
232 | tempval = gfar_read(&priv->regs->dmactrl); | |
233 | tempval |= (DMACTRL_GRS | DMACTRL_GTS); | |
234 | gfar_write(&priv->regs->dmactrl, tempval); | |
235 | ||
236 | while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))) | |
237 | cpu_relax(); | |
238 | ||
239 | /* Reset MAC layer */ | |
240 | gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); | |
241 | ||
242 | tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); | |
243 | gfar_write(&priv->regs->maccfg1, tempval); | |
244 | ||
245 | /* Initialize MACCFG2. */ | |
246 | gfar_write(&priv->regs->maccfg2, MACCFG2_INIT_SETTINGS); | |
247 | ||
248 | /* Initialize ECNTRL */ | |
249 | gfar_write(&priv->regs->ecntrl, ECNTRL_INIT_SETTINGS); | |
250 | ||
251 | /* Copy the station address into the dev structure, */ | |
252 | memcpy(dev->dev_addr, einfo->mac_addr, MAC_ADDR_LEN); | |
253 | ||
254 | /* Set the dev->base_addr to the gfar reg region */ | |
255 | dev->base_addr = (unsigned long) (priv->regs); | |
256 | ||
3ae5eaec | 257 | SET_NETDEV_DEV(dev, &pdev->dev); |
1da177e4 LT |
258 | |
259 | /* Fill in the dev structure */ | |
260 | dev->open = gfar_enet_open; | |
261 | dev->hard_start_xmit = gfar_start_xmit; | |
262 | dev->tx_timeout = gfar_timeout; | |
263 | dev->watchdog_timeo = TX_TIMEOUT; | |
bea3348e | 264 | netif_napi_add(dev, &priv->napi, gfar_poll, GFAR_DEV_WEIGHT); |
f2d71c2d VW |
265 | #ifdef CONFIG_NET_POLL_CONTROLLER |
266 | dev->poll_controller = gfar_netpoll; | |
1da177e4 LT |
267 | #endif |
268 | dev->stop = gfar_close; | |
1da177e4 LT |
269 | dev->change_mtu = gfar_change_mtu; |
270 | dev->mtu = 1500; | |
271 | dev->set_multicast_list = gfar_set_multi; | |
272 | ||
0bbaf069 KG |
273 | dev->ethtool_ops = &gfar_ethtool_ops; |
274 | ||
275 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) { | |
276 | priv->rx_csum_enable = 1; | |
277 | dev->features |= NETIF_F_IP_CSUM; | |
278 | } else | |
279 | priv->rx_csum_enable = 0; | |
280 | ||
281 | priv->vlgrp = NULL; | |
1da177e4 | 282 | |
0bbaf069 KG |
283 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { |
284 | dev->vlan_rx_register = gfar_vlan_rx_register; | |
1da177e4 | 285 | |
0bbaf069 KG |
286 | dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; |
287 | ||
288 | priv->vlan_enable = 1; | |
289 | } | |
290 | ||
291 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { | |
292 | priv->extended_hash = 1; | |
293 | priv->hash_width = 9; | |
294 | ||
295 | priv->hash_regs[0] = &priv->regs->igaddr0; | |
296 | priv->hash_regs[1] = &priv->regs->igaddr1; | |
297 | priv->hash_regs[2] = &priv->regs->igaddr2; | |
298 | priv->hash_regs[3] = &priv->regs->igaddr3; | |
299 | priv->hash_regs[4] = &priv->regs->igaddr4; | |
300 | priv->hash_regs[5] = &priv->regs->igaddr5; | |
301 | priv->hash_regs[6] = &priv->regs->igaddr6; | |
302 | priv->hash_regs[7] = &priv->regs->igaddr7; | |
303 | priv->hash_regs[8] = &priv->regs->gaddr0; | |
304 | priv->hash_regs[9] = &priv->regs->gaddr1; | |
305 | priv->hash_regs[10] = &priv->regs->gaddr2; | |
306 | priv->hash_regs[11] = &priv->regs->gaddr3; | |
307 | priv->hash_regs[12] = &priv->regs->gaddr4; | |
308 | priv->hash_regs[13] = &priv->regs->gaddr5; | |
309 | priv->hash_regs[14] = &priv->regs->gaddr6; | |
310 | priv->hash_regs[15] = &priv->regs->gaddr7; | |
311 | ||
312 | } else { | |
313 | priv->extended_hash = 0; | |
314 | priv->hash_width = 8; | |
315 | ||
316 | priv->hash_regs[0] = &priv->regs->gaddr0; | |
317 | priv->hash_regs[1] = &priv->regs->gaddr1; | |
318 | priv->hash_regs[2] = &priv->regs->gaddr2; | |
319 | priv->hash_regs[3] = &priv->regs->gaddr3; | |
320 | priv->hash_regs[4] = &priv->regs->gaddr4; | |
321 | priv->hash_regs[5] = &priv->regs->gaddr5; | |
322 | priv->hash_regs[6] = &priv->regs->gaddr6; | |
323 | priv->hash_regs[7] = &priv->regs->gaddr7; | |
324 | } | |
325 | ||
326 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_PADDING) | |
327 | priv->padding = DEFAULT_PADDING; | |
328 | else | |
329 | priv->padding = 0; | |
330 | ||
0bbaf069 KG |
331 | if (dev->features & NETIF_F_IP_CSUM) |
332 | dev->hard_header_len += GMAC_FCB_LEN; | |
1da177e4 LT |
333 | |
334 | priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE; | |
1da177e4 LT |
335 | priv->tx_ring_size = DEFAULT_TX_RING_SIZE; |
336 | priv->rx_ring_size = DEFAULT_RX_RING_SIZE; | |
337 | ||
338 | priv->txcoalescing = DEFAULT_TX_COALESCE; | |
339 | priv->txcount = DEFAULT_TXCOUNT; | |
340 | priv->txtime = DEFAULT_TXTIME; | |
341 | priv->rxcoalescing = DEFAULT_RX_COALESCE; | |
342 | priv->rxcount = DEFAULT_RXCOUNT; | |
343 | priv->rxtime = DEFAULT_RXTIME; | |
344 | ||
0bbaf069 KG |
345 | /* Enable most messages by default */ |
346 | priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; | |
347 | ||
1da177e4 LT |
348 | err = register_netdev(dev); |
349 | ||
350 | if (err) { | |
351 | printk(KERN_ERR "%s: Cannot register net device, aborting.\n", | |
352 | dev->name); | |
353 | goto register_fail; | |
354 | } | |
355 | ||
7f7f5316 AF |
356 | /* Create all the sysfs files */ |
357 | gfar_init_sysfs(dev); | |
358 | ||
1da177e4 | 359 | /* Print out the device info */ |
0795af57 JP |
360 | printk(KERN_INFO DEVICE_NAME "%s\n", |
361 | dev->name, print_mac(mac, dev->dev_addr)); | |
1da177e4 LT |
362 | |
363 | /* Even more device info helps when determining which kernel */ | |
7f7f5316 | 364 | /* provided which set of benchmarks. */ |
1da177e4 LT |
365 | #ifdef CONFIG_GFAR_NAPI |
366 | printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name); | |
367 | #else | |
368 | printk(KERN_INFO "%s: Running with NAPI disabled\n", dev->name); | |
369 | #endif | |
370 | printk(KERN_INFO "%s: %d/%d RX/TX BD ring size\n", | |
371 | dev->name, priv->rx_ring_size, priv->tx_ring_size); | |
372 | ||
373 | return 0; | |
374 | ||
375 | register_fail: | |
cc8c6e37 | 376 | iounmap(priv->regs); |
1da177e4 LT |
377 | regs_fail: |
378 | free_netdev(dev); | |
bb40dcbb | 379 | return err; |
1da177e4 LT |
380 | } |
381 | ||
3ae5eaec | 382 | static int gfar_remove(struct platform_device *pdev) |
1da177e4 | 383 | { |
3ae5eaec | 384 | struct net_device *dev = platform_get_drvdata(pdev); |
1da177e4 LT |
385 | struct gfar_private *priv = netdev_priv(dev); |
386 | ||
3ae5eaec | 387 | platform_set_drvdata(pdev, NULL); |
1da177e4 | 388 | |
cc8c6e37 | 389 | iounmap(priv->regs); |
1da177e4 LT |
390 | free_netdev(dev); |
391 | ||
392 | return 0; | |
393 | } | |
394 | ||
395 | ||
e8a2b6a4 AF |
396 | /* Reads the controller's registers to determine what interface |
397 | * connects it to the PHY. | |
398 | */ | |
399 | static phy_interface_t gfar_get_interface(struct net_device *dev) | |
400 | { | |
401 | struct gfar_private *priv = netdev_priv(dev); | |
402 | u32 ecntrl = gfar_read(&priv->regs->ecntrl); | |
403 | ||
404 | if (ecntrl & ECNTRL_SGMII_MODE) | |
405 | return PHY_INTERFACE_MODE_SGMII; | |
406 | ||
407 | if (ecntrl & ECNTRL_TBI_MODE) { | |
408 | if (ecntrl & ECNTRL_REDUCED_MODE) | |
409 | return PHY_INTERFACE_MODE_RTBI; | |
410 | else | |
411 | return PHY_INTERFACE_MODE_TBI; | |
412 | } | |
413 | ||
414 | if (ecntrl & ECNTRL_REDUCED_MODE) { | |
415 | if (ecntrl & ECNTRL_REDUCED_MII_MODE) | |
416 | return PHY_INTERFACE_MODE_RMII; | |
7132ab7f AF |
417 | else { |
418 | phy_interface_t interface = priv->einfo->interface; | |
419 | ||
420 | /* | |
421 | * This isn't autodetected right now, so it must | |
422 | * be set by the device tree or platform code. | |
423 | */ | |
424 | if (interface == PHY_INTERFACE_MODE_RGMII_ID) | |
425 | return PHY_INTERFACE_MODE_RGMII_ID; | |
426 | ||
e8a2b6a4 | 427 | return PHY_INTERFACE_MODE_RGMII; |
7132ab7f | 428 | } |
e8a2b6a4 AF |
429 | } |
430 | ||
431 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT) | |
432 | return PHY_INTERFACE_MODE_GMII; | |
433 | ||
434 | return PHY_INTERFACE_MODE_MII; | |
435 | } | |
436 | ||
437 | ||
bb40dcbb AF |
438 | /* Initializes driver's PHY state, and attaches to the PHY. |
439 | * Returns 0 on success. | |
1da177e4 LT |
440 | */ |
441 | static int init_phy(struct net_device *dev) | |
442 | { | |
443 | struct gfar_private *priv = netdev_priv(dev); | |
bb40dcbb AF |
444 | uint gigabit_support = |
445 | priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? | |
446 | SUPPORTED_1000baseT_Full : 0; | |
447 | struct phy_device *phydev; | |
4d3248a2 | 448 | char phy_id[BUS_ID_SIZE]; |
e8a2b6a4 | 449 | phy_interface_t interface; |
1da177e4 LT |
450 | |
451 | priv->oldlink = 0; | |
452 | priv->oldspeed = 0; | |
453 | priv->oldduplex = -1; | |
454 | ||
4d3248a2 KG |
455 | snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id); |
456 | ||
e8a2b6a4 AF |
457 | interface = gfar_get_interface(dev); |
458 | ||
459 | phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface); | |
1da177e4 | 460 | |
d3c12873 KJ |
461 | if (interface == PHY_INTERFACE_MODE_SGMII) |
462 | gfar_configure_serdes(dev); | |
463 | ||
bb40dcbb AF |
464 | if (IS_ERR(phydev)) { |
465 | printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); | |
466 | return PTR_ERR(phydev); | |
1da177e4 LT |
467 | } |
468 | ||
bb40dcbb AF |
469 | /* Remove any features not supported by the controller */ |
470 | phydev->supported &= (GFAR_SUPPORTED | gigabit_support); | |
471 | phydev->advertising = phydev->supported; | |
1da177e4 | 472 | |
bb40dcbb | 473 | priv->phydev = phydev; |
1da177e4 LT |
474 | |
475 | return 0; | |
1da177e4 LT |
476 | } |
477 | ||
d3c12873 KJ |
478 | static void gfar_configure_serdes(struct net_device *dev) |
479 | { | |
480 | struct gfar_private *priv = netdev_priv(dev); | |
481 | struct gfar_mii __iomem *regs = | |
482 | (void __iomem *)&priv->regs->gfar_mii_regs; | |
483 | ||
484 | /* Initialise TBI i/f to communicate with serdes (lynx phy) */ | |
485 | ||
486 | /* Single clk mode, mii mode off(for aerdes communication) */ | |
487 | gfar_local_mdio_write(regs, TBIPA_VALUE, MII_TBICON, TBICON_CLK_SELECT); | |
488 | ||
489 | /* Supported pause and full-duplex, no half-duplex */ | |
490 | gfar_local_mdio_write(regs, TBIPA_VALUE, MII_ADVERTISE, | |
491 | ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | | |
492 | ADVERTISE_1000XPSE_ASYM); | |
493 | ||
494 | /* ANEG enable, restart ANEG, full duplex mode, speed[1] set */ | |
495 | gfar_local_mdio_write(regs, TBIPA_VALUE, MII_BMCR, BMCR_ANENABLE | | |
496 | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); | |
497 | } | |
498 | ||
1da177e4 LT |
499 | static void init_registers(struct net_device *dev) |
500 | { | |
501 | struct gfar_private *priv = netdev_priv(dev); | |
502 | ||
503 | /* Clear IEVENT */ | |
504 | gfar_write(&priv->regs->ievent, IEVENT_INIT_CLEAR); | |
505 | ||
506 | /* Initialize IMASK */ | |
507 | gfar_write(&priv->regs->imask, IMASK_INIT_CLEAR); | |
508 | ||
509 | /* Init hash registers to zero */ | |
0bbaf069 KG |
510 | gfar_write(&priv->regs->igaddr0, 0); |
511 | gfar_write(&priv->regs->igaddr1, 0); | |
512 | gfar_write(&priv->regs->igaddr2, 0); | |
513 | gfar_write(&priv->regs->igaddr3, 0); | |
514 | gfar_write(&priv->regs->igaddr4, 0); | |
515 | gfar_write(&priv->regs->igaddr5, 0); | |
516 | gfar_write(&priv->regs->igaddr6, 0); | |
517 | gfar_write(&priv->regs->igaddr7, 0); | |
1da177e4 LT |
518 | |
519 | gfar_write(&priv->regs->gaddr0, 0); | |
520 | gfar_write(&priv->regs->gaddr1, 0); | |
521 | gfar_write(&priv->regs->gaddr2, 0); | |
522 | gfar_write(&priv->regs->gaddr3, 0); | |
523 | gfar_write(&priv->regs->gaddr4, 0); | |
524 | gfar_write(&priv->regs->gaddr5, 0); | |
525 | gfar_write(&priv->regs->gaddr6, 0); | |
526 | gfar_write(&priv->regs->gaddr7, 0); | |
527 | ||
1da177e4 LT |
528 | /* Zero out the rmon mib registers if it has them */ |
529 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { | |
cc8c6e37 | 530 | memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib)); |
1da177e4 LT |
531 | |
532 | /* Mask off the CAM interrupts */ | |
533 | gfar_write(&priv->regs->rmon.cam1, 0xffffffff); | |
534 | gfar_write(&priv->regs->rmon.cam2, 0xffffffff); | |
535 | } | |
536 | ||
537 | /* Initialize the max receive buffer length */ | |
538 | gfar_write(&priv->regs->mrblr, priv->rx_buffer_size); | |
539 | ||
1da177e4 LT |
540 | /* Initialize the Minimum Frame Length Register */ |
541 | gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS); | |
542 | ||
1da177e4 LT |
543 | /* Assign the TBI an address which won't conflict with the PHYs */ |
544 | gfar_write(&priv->regs->tbipa, TBIPA_VALUE); | |
545 | } | |
546 | ||
0bbaf069 KG |
547 | |
548 | /* Halt the receive and transmit queues */ | |
549 | void gfar_halt(struct net_device *dev) | |
1da177e4 LT |
550 | { |
551 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 552 | struct gfar __iomem *regs = priv->regs; |
1da177e4 LT |
553 | u32 tempval; |
554 | ||
1da177e4 LT |
555 | /* Mask all interrupts */ |
556 | gfar_write(®s->imask, IMASK_INIT_CLEAR); | |
557 | ||
558 | /* Clear all interrupts */ | |
559 | gfar_write(®s->ievent, IEVENT_INIT_CLEAR); | |
560 | ||
561 | /* Stop the DMA, and wait for it to stop */ | |
562 | tempval = gfar_read(&priv->regs->dmactrl); | |
563 | if ((tempval & (DMACTRL_GRS | DMACTRL_GTS)) | |
564 | != (DMACTRL_GRS | DMACTRL_GTS)) { | |
565 | tempval |= (DMACTRL_GRS | DMACTRL_GTS); | |
566 | gfar_write(&priv->regs->dmactrl, tempval); | |
567 | ||
568 | while (!(gfar_read(&priv->regs->ievent) & | |
569 | (IEVENT_GRSC | IEVENT_GTSC))) | |
570 | cpu_relax(); | |
571 | } | |
572 | ||
573 | /* Disable Rx and Tx */ | |
574 | tempval = gfar_read(®s->maccfg1); | |
575 | tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN); | |
576 | gfar_write(®s->maccfg1, tempval); | |
0bbaf069 KG |
577 | } |
578 | ||
579 | void stop_gfar(struct net_device *dev) | |
580 | { | |
581 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 582 | struct gfar __iomem *regs = priv->regs; |
0bbaf069 KG |
583 | unsigned long flags; |
584 | ||
bb40dcbb AF |
585 | phy_stop(priv->phydev); |
586 | ||
0bbaf069 | 587 | /* Lock it down */ |
fef6108d AF |
588 | spin_lock_irqsave(&priv->txlock, flags); |
589 | spin_lock(&priv->rxlock); | |
0bbaf069 | 590 | |
0bbaf069 | 591 | gfar_halt(dev); |
1da177e4 | 592 | |
fef6108d AF |
593 | spin_unlock(&priv->rxlock); |
594 | spin_unlock_irqrestore(&priv->txlock, flags); | |
1da177e4 LT |
595 | |
596 | /* Free the IRQs */ | |
597 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { | |
598 | free_irq(priv->interruptError, dev); | |
599 | free_irq(priv->interruptTransmit, dev); | |
600 | free_irq(priv->interruptReceive, dev); | |
601 | } else { | |
bb40dcbb | 602 | free_irq(priv->interruptTransmit, dev); |
1da177e4 LT |
603 | } |
604 | ||
605 | free_skb_resources(priv); | |
606 | ||
607 | dma_free_coherent(NULL, | |
608 | sizeof(struct txbd8)*priv->tx_ring_size | |
609 | + sizeof(struct rxbd8)*priv->rx_ring_size, | |
610 | priv->tx_bd_base, | |
0bbaf069 | 611 | gfar_read(®s->tbase0)); |
1da177e4 LT |
612 | } |
613 | ||
614 | /* If there are any tx skbs or rx skbs still around, free them. | |
615 | * Then free tx_skbuff and rx_skbuff */ | |
bb40dcbb | 616 | static void free_skb_resources(struct gfar_private *priv) |
1da177e4 LT |
617 | { |
618 | struct rxbd8 *rxbdp; | |
619 | struct txbd8 *txbdp; | |
620 | int i; | |
621 | ||
622 | /* Go through all the buffer descriptors and free their data buffers */ | |
623 | txbdp = priv->tx_bd_base; | |
624 | ||
625 | for (i = 0; i < priv->tx_ring_size; i++) { | |
626 | ||
627 | if (priv->tx_skbuff[i]) { | |
628 | dma_unmap_single(NULL, txbdp->bufPtr, | |
629 | txbdp->length, | |
630 | DMA_TO_DEVICE); | |
631 | dev_kfree_skb_any(priv->tx_skbuff[i]); | |
632 | priv->tx_skbuff[i] = NULL; | |
633 | } | |
634 | } | |
635 | ||
636 | kfree(priv->tx_skbuff); | |
637 | ||
638 | rxbdp = priv->rx_bd_base; | |
639 | ||
640 | /* rx_skbuff is not guaranteed to be allocated, so only | |
641 | * free it and its contents if it is allocated */ | |
642 | if(priv->rx_skbuff != NULL) { | |
643 | for (i = 0; i < priv->rx_ring_size; i++) { | |
644 | if (priv->rx_skbuff[i]) { | |
645 | dma_unmap_single(NULL, rxbdp->bufPtr, | |
7f7f5316 | 646 | priv->rx_buffer_size, |
1da177e4 LT |
647 | DMA_FROM_DEVICE); |
648 | ||
649 | dev_kfree_skb_any(priv->rx_skbuff[i]); | |
650 | priv->rx_skbuff[i] = NULL; | |
651 | } | |
652 | ||
653 | rxbdp->status = 0; | |
654 | rxbdp->length = 0; | |
655 | rxbdp->bufPtr = 0; | |
656 | ||
657 | rxbdp++; | |
658 | } | |
659 | ||
660 | kfree(priv->rx_skbuff); | |
661 | } | |
662 | } | |
663 | ||
0bbaf069 KG |
664 | void gfar_start(struct net_device *dev) |
665 | { | |
666 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 667 | struct gfar __iomem *regs = priv->regs; |
0bbaf069 KG |
668 | u32 tempval; |
669 | ||
670 | /* Enable Rx and Tx in MACCFG1 */ | |
671 | tempval = gfar_read(®s->maccfg1); | |
672 | tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN); | |
673 | gfar_write(®s->maccfg1, tempval); | |
674 | ||
675 | /* Initialize DMACTRL to have WWR and WOP */ | |
676 | tempval = gfar_read(&priv->regs->dmactrl); | |
677 | tempval |= DMACTRL_INIT_SETTINGS; | |
678 | gfar_write(&priv->regs->dmactrl, tempval); | |
679 | ||
0bbaf069 KG |
680 | /* Make sure we aren't stopped */ |
681 | tempval = gfar_read(&priv->regs->dmactrl); | |
682 | tempval &= ~(DMACTRL_GRS | DMACTRL_GTS); | |
683 | gfar_write(&priv->regs->dmactrl, tempval); | |
684 | ||
fef6108d AF |
685 | /* Clear THLT/RHLT, so that the DMA starts polling now */ |
686 | gfar_write(®s->tstat, TSTAT_CLEAR_THALT); | |
687 | gfar_write(®s->rstat, RSTAT_CLEAR_RHALT); | |
688 | ||
0bbaf069 KG |
689 | /* Unmask the interrupts we look for */ |
690 | gfar_write(®s->imask, IMASK_DEFAULT); | |
691 | } | |
692 | ||
1da177e4 LT |
693 | /* Bring the controller up and running */ |
694 | int startup_gfar(struct net_device *dev) | |
695 | { | |
696 | struct txbd8 *txbdp; | |
697 | struct rxbd8 *rxbdp; | |
698 | dma_addr_t addr; | |
699 | unsigned long vaddr; | |
700 | int i; | |
701 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 702 | struct gfar __iomem *regs = priv->regs; |
1da177e4 | 703 | int err = 0; |
0bbaf069 | 704 | u32 rctrl = 0; |
7f7f5316 | 705 | u32 attrs = 0; |
1da177e4 LT |
706 | |
707 | gfar_write(®s->imask, IMASK_INIT_CLEAR); | |
708 | ||
709 | /* Allocate memory for the buffer descriptors */ | |
0bbaf069 | 710 | vaddr = (unsigned long) dma_alloc_coherent(NULL, |
1da177e4 LT |
711 | sizeof (struct txbd8) * priv->tx_ring_size + |
712 | sizeof (struct rxbd8) * priv->rx_ring_size, | |
713 | &addr, GFP_KERNEL); | |
714 | ||
715 | if (vaddr == 0) { | |
0bbaf069 KG |
716 | if (netif_msg_ifup(priv)) |
717 | printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n", | |
718 | dev->name); | |
1da177e4 LT |
719 | return -ENOMEM; |
720 | } | |
721 | ||
722 | priv->tx_bd_base = (struct txbd8 *) vaddr; | |
723 | ||
724 | /* enet DMA only understands physical addresses */ | |
0bbaf069 | 725 | gfar_write(®s->tbase0, addr); |
1da177e4 LT |
726 | |
727 | /* Start the rx descriptor ring where the tx ring leaves off */ | |
728 | addr = addr + sizeof (struct txbd8) * priv->tx_ring_size; | |
729 | vaddr = vaddr + sizeof (struct txbd8) * priv->tx_ring_size; | |
730 | priv->rx_bd_base = (struct rxbd8 *) vaddr; | |
0bbaf069 | 731 | gfar_write(®s->rbase0, addr); |
1da177e4 LT |
732 | |
733 | /* Setup the skbuff rings */ | |
734 | priv->tx_skbuff = | |
735 | (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * | |
736 | priv->tx_ring_size, GFP_KERNEL); | |
737 | ||
bb40dcbb | 738 | if (NULL == priv->tx_skbuff) { |
0bbaf069 KG |
739 | if (netif_msg_ifup(priv)) |
740 | printk(KERN_ERR "%s: Could not allocate tx_skbuff\n", | |
741 | dev->name); | |
1da177e4 LT |
742 | err = -ENOMEM; |
743 | goto tx_skb_fail; | |
744 | } | |
745 | ||
746 | for (i = 0; i < priv->tx_ring_size; i++) | |
747 | priv->tx_skbuff[i] = NULL; | |
748 | ||
749 | priv->rx_skbuff = | |
750 | (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * | |
751 | priv->rx_ring_size, GFP_KERNEL); | |
752 | ||
bb40dcbb | 753 | if (NULL == priv->rx_skbuff) { |
0bbaf069 KG |
754 | if (netif_msg_ifup(priv)) |
755 | printk(KERN_ERR "%s: Could not allocate rx_skbuff\n", | |
756 | dev->name); | |
1da177e4 LT |
757 | err = -ENOMEM; |
758 | goto rx_skb_fail; | |
759 | } | |
760 | ||
761 | for (i = 0; i < priv->rx_ring_size; i++) | |
762 | priv->rx_skbuff[i] = NULL; | |
763 | ||
764 | /* Initialize some variables in our dev structure */ | |
765 | priv->dirty_tx = priv->cur_tx = priv->tx_bd_base; | |
766 | priv->cur_rx = priv->rx_bd_base; | |
767 | priv->skb_curtx = priv->skb_dirtytx = 0; | |
768 | priv->skb_currx = 0; | |
769 | ||
770 | /* Initialize Transmit Descriptor Ring */ | |
771 | txbdp = priv->tx_bd_base; | |
772 | for (i = 0; i < priv->tx_ring_size; i++) { | |
773 | txbdp->status = 0; | |
774 | txbdp->length = 0; | |
775 | txbdp->bufPtr = 0; | |
776 | txbdp++; | |
777 | } | |
778 | ||
779 | /* Set the last descriptor in the ring to indicate wrap */ | |
780 | txbdp--; | |
781 | txbdp->status |= TXBD_WRAP; | |
782 | ||
783 | rxbdp = priv->rx_bd_base; | |
784 | for (i = 0; i < priv->rx_ring_size; i++) { | |
785 | struct sk_buff *skb = NULL; | |
786 | ||
787 | rxbdp->status = 0; | |
788 | ||
789 | skb = gfar_new_skb(dev, rxbdp); | |
790 | ||
791 | priv->rx_skbuff[i] = skb; | |
792 | ||
793 | rxbdp++; | |
794 | } | |
795 | ||
796 | /* Set the last descriptor in the ring to wrap */ | |
797 | rxbdp--; | |
798 | rxbdp->status |= RXBD_WRAP; | |
799 | ||
800 | /* If the device has multiple interrupts, register for | |
801 | * them. Otherwise, only register for the one */ | |
802 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { | |
0bbaf069 | 803 | /* Install our interrupt handlers for Error, |
1da177e4 LT |
804 | * Transmit, and Receive */ |
805 | if (request_irq(priv->interruptError, gfar_error, | |
806 | 0, "enet_error", dev) < 0) { | |
0bbaf069 KG |
807 | if (netif_msg_intr(priv)) |
808 | printk(KERN_ERR "%s: Can't get IRQ %d\n", | |
809 | dev->name, priv->interruptError); | |
1da177e4 LT |
810 | |
811 | err = -1; | |
812 | goto err_irq_fail; | |
813 | } | |
814 | ||
815 | if (request_irq(priv->interruptTransmit, gfar_transmit, | |
816 | 0, "enet_tx", dev) < 0) { | |
0bbaf069 KG |
817 | if (netif_msg_intr(priv)) |
818 | printk(KERN_ERR "%s: Can't get IRQ %d\n", | |
819 | dev->name, priv->interruptTransmit); | |
1da177e4 LT |
820 | |
821 | err = -1; | |
822 | ||
823 | goto tx_irq_fail; | |
824 | } | |
825 | ||
826 | if (request_irq(priv->interruptReceive, gfar_receive, | |
827 | 0, "enet_rx", dev) < 0) { | |
0bbaf069 KG |
828 | if (netif_msg_intr(priv)) |
829 | printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n", | |
830 | dev->name, priv->interruptReceive); | |
1da177e4 LT |
831 | |
832 | err = -1; | |
833 | goto rx_irq_fail; | |
834 | } | |
835 | } else { | |
836 | if (request_irq(priv->interruptTransmit, gfar_interrupt, | |
837 | 0, "gfar_interrupt", dev) < 0) { | |
0bbaf069 KG |
838 | if (netif_msg_intr(priv)) |
839 | printk(KERN_ERR "%s: Can't get IRQ %d\n", | |
840 | dev->name, priv->interruptError); | |
1da177e4 LT |
841 | |
842 | err = -1; | |
843 | goto err_irq_fail; | |
844 | } | |
845 | } | |
846 | ||
bb40dcbb | 847 | phy_start(priv->phydev); |
1da177e4 LT |
848 | |
849 | /* Configure the coalescing support */ | |
850 | if (priv->txcoalescing) | |
851 | gfar_write(®s->txic, | |
852 | mk_ic_value(priv->txcount, priv->txtime)); | |
853 | else | |
854 | gfar_write(®s->txic, 0); | |
855 | ||
856 | if (priv->rxcoalescing) | |
857 | gfar_write(®s->rxic, | |
858 | mk_ic_value(priv->rxcount, priv->rxtime)); | |
859 | else | |
860 | gfar_write(®s->rxic, 0); | |
861 | ||
0bbaf069 KG |
862 | if (priv->rx_csum_enable) |
863 | rctrl |= RCTRL_CHECKSUMMING; | |
1da177e4 | 864 | |
7f7f5316 | 865 | if (priv->extended_hash) { |
0bbaf069 | 866 | rctrl |= RCTRL_EXTHASH; |
1da177e4 | 867 | |
7f7f5316 AF |
868 | gfar_clear_exact_match(dev); |
869 | rctrl |= RCTRL_EMEN; | |
870 | } | |
871 | ||
0bbaf069 KG |
872 | if (priv->vlan_enable) |
873 | rctrl |= RCTRL_VLAN; | |
1da177e4 | 874 | |
7f7f5316 AF |
875 | if (priv->padding) { |
876 | rctrl &= ~RCTRL_PAL_MASK; | |
877 | rctrl |= RCTRL_PADDING(priv->padding); | |
878 | } | |
879 | ||
0bbaf069 KG |
880 | /* Init rctrl based on our settings */ |
881 | gfar_write(&priv->regs->rctrl, rctrl); | |
1da177e4 | 882 | |
0bbaf069 KG |
883 | if (dev->features & NETIF_F_IP_CSUM) |
884 | gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM); | |
1da177e4 | 885 | |
7f7f5316 AF |
886 | /* Set the extraction length and index */ |
887 | attrs = ATTRELI_EL(priv->rx_stash_size) | | |
888 | ATTRELI_EI(priv->rx_stash_index); | |
889 | ||
890 | gfar_write(&priv->regs->attreli, attrs); | |
891 | ||
892 | /* Start with defaults, and add stashing or locking | |
893 | * depending on the approprate variables */ | |
894 | attrs = ATTR_INIT_SETTINGS; | |
895 | ||
896 | if (priv->bd_stash_en) | |
897 | attrs |= ATTR_BDSTASH; | |
898 | ||
899 | if (priv->rx_stash_size != 0) | |
900 | attrs |= ATTR_BUFSTASH; | |
901 | ||
902 | gfar_write(&priv->regs->attr, attrs); | |
903 | ||
904 | gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold); | |
905 | gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve); | |
906 | gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off); | |
907 | ||
908 | /* Start the controller */ | |
0bbaf069 | 909 | gfar_start(dev); |
1da177e4 LT |
910 | |
911 | return 0; | |
912 | ||
913 | rx_irq_fail: | |
914 | free_irq(priv->interruptTransmit, dev); | |
915 | tx_irq_fail: | |
916 | free_irq(priv->interruptError, dev); | |
917 | err_irq_fail: | |
918 | rx_skb_fail: | |
919 | free_skb_resources(priv); | |
920 | tx_skb_fail: | |
921 | dma_free_coherent(NULL, | |
922 | sizeof(struct txbd8)*priv->tx_ring_size | |
923 | + sizeof(struct rxbd8)*priv->rx_ring_size, | |
924 | priv->tx_bd_base, | |
0bbaf069 | 925 | gfar_read(®s->tbase0)); |
1da177e4 | 926 | |
1da177e4 LT |
927 | return err; |
928 | } | |
929 | ||
930 | /* Called when something needs to use the ethernet device */ | |
931 | /* Returns 0 for success. */ | |
932 | static int gfar_enet_open(struct net_device *dev) | |
933 | { | |
934 | int err; | |
935 | ||
bea3348e SH |
936 | napi_enable(&priv->napi); |
937 | ||
1da177e4 LT |
938 | /* Initialize a bunch of registers */ |
939 | init_registers(dev); | |
940 | ||
941 | gfar_set_mac_address(dev); | |
942 | ||
943 | err = init_phy(dev); | |
944 | ||
bea3348e SH |
945 | if(err) { |
946 | napi_disable(&priv->napi); | |
1da177e4 | 947 | return err; |
bea3348e | 948 | } |
1da177e4 LT |
949 | |
950 | err = startup_gfar(dev); | |
bea3348e SH |
951 | if (err) |
952 | napi_disable(&priv->napi); | |
1da177e4 LT |
953 | |
954 | netif_start_queue(dev); | |
955 | ||
956 | return err; | |
957 | } | |
958 | ||
7f7f5316 | 959 | static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp) |
0bbaf069 KG |
960 | { |
961 | struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN); | |
962 | ||
963 | memset(fcb, 0, GMAC_FCB_LEN); | |
964 | ||
0bbaf069 KG |
965 | return fcb; |
966 | } | |
967 | ||
968 | static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb) | |
969 | { | |
7f7f5316 | 970 | u8 flags = 0; |
0bbaf069 KG |
971 | |
972 | /* If we're here, it's a IP packet with a TCP or UDP | |
973 | * payload. We set it to checksum, using a pseudo-header | |
974 | * we provide | |
975 | */ | |
7f7f5316 | 976 | flags = TXFCB_DEFAULT; |
0bbaf069 | 977 | |
7f7f5316 AF |
978 | /* Tell the controller what the protocol is */ |
979 | /* And provide the already calculated phcs */ | |
eddc9ec5 | 980 | if (ip_hdr(skb)->protocol == IPPROTO_UDP) { |
7f7f5316 | 981 | flags |= TXFCB_UDP; |
4bedb452 | 982 | fcb->phcs = udp_hdr(skb)->check; |
7f7f5316 | 983 | } else |
8da32de5 | 984 | fcb->phcs = tcp_hdr(skb)->check; |
0bbaf069 KG |
985 | |
986 | /* l3os is the distance between the start of the | |
987 | * frame (skb->data) and the start of the IP hdr. | |
988 | * l4os is the distance between the start of the | |
989 | * l3 hdr and the l4 hdr */ | |
bbe735e4 | 990 | fcb->l3os = (u16)(skb_network_offset(skb) - GMAC_FCB_LEN); |
cfe1fc77 | 991 | fcb->l4os = skb_network_header_len(skb); |
0bbaf069 | 992 | |
7f7f5316 | 993 | fcb->flags = flags; |
0bbaf069 KG |
994 | } |
995 | ||
7f7f5316 | 996 | void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb) |
0bbaf069 | 997 | { |
7f7f5316 | 998 | fcb->flags |= TXFCB_VLN; |
0bbaf069 KG |
999 | fcb->vlctl = vlan_tx_tag_get(skb); |
1000 | } | |
1001 | ||
1da177e4 LT |
1002 | /* This is called by the kernel when a frame is ready for transmission. */ |
1003 | /* It is pointed to by the dev->hard_start_xmit function pointer */ | |
1004 | static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
1005 | { | |
1006 | struct gfar_private *priv = netdev_priv(dev); | |
0bbaf069 | 1007 | struct txfcb *fcb = NULL; |
1da177e4 | 1008 | struct txbd8 *txbdp; |
7f7f5316 | 1009 | u16 status; |
fef6108d | 1010 | unsigned long flags; |
1da177e4 LT |
1011 | |
1012 | /* Update transmit stats */ | |
09f75cd7 | 1013 | dev->stats.tx_bytes += skb->len; |
1da177e4 LT |
1014 | |
1015 | /* Lock priv now */ | |
fef6108d | 1016 | spin_lock_irqsave(&priv->txlock, flags); |
1da177e4 LT |
1017 | |
1018 | /* Point at the first free tx descriptor */ | |
1019 | txbdp = priv->cur_tx; | |
1020 | ||
1021 | /* Clear all but the WRAP status flags */ | |
7f7f5316 | 1022 | status = txbdp->status & TXBD_WRAP; |
1da177e4 | 1023 | |
0bbaf069 | 1024 | /* Set up checksumming */ |
7f7f5316 | 1025 | if (likely((dev->features & NETIF_F_IP_CSUM) |
84fa7933 | 1026 | && (CHECKSUM_PARTIAL == skb->ip_summed))) { |
0bbaf069 | 1027 | fcb = gfar_add_fcb(skb, txbdp); |
7f7f5316 | 1028 | status |= TXBD_TOE; |
0bbaf069 KG |
1029 | gfar_tx_checksum(skb, fcb); |
1030 | } | |
1031 | ||
1032 | if (priv->vlan_enable && | |
1033 | unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) { | |
7f7f5316 | 1034 | if (unlikely(NULL == fcb)) { |
0bbaf069 | 1035 | fcb = gfar_add_fcb(skb, txbdp); |
7f7f5316 AF |
1036 | status |= TXBD_TOE; |
1037 | } | |
0bbaf069 KG |
1038 | |
1039 | gfar_tx_vlan(skb, fcb); | |
1040 | } | |
1041 | ||
1da177e4 LT |
1042 | /* Set buffer length and pointer */ |
1043 | txbdp->length = skb->len; | |
0bbaf069 | 1044 | txbdp->bufPtr = dma_map_single(NULL, skb->data, |
1da177e4 LT |
1045 | skb->len, DMA_TO_DEVICE); |
1046 | ||
1047 | /* Save the skb pointer so we can free it later */ | |
1048 | priv->tx_skbuff[priv->skb_curtx] = skb; | |
1049 | ||
1050 | /* Update the current skb pointer (wrapping if this was the last) */ | |
1051 | priv->skb_curtx = | |
1052 | (priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size); | |
1053 | ||
1054 | /* Flag the BD as interrupt-causing */ | |
7f7f5316 | 1055 | status |= TXBD_INTERRUPT; |
1da177e4 LT |
1056 | |
1057 | /* Flag the BD as ready to go, last in frame, and */ | |
1058 | /* in need of CRC */ | |
7f7f5316 | 1059 | status |= (TXBD_READY | TXBD_LAST | TXBD_CRC); |
1da177e4 LT |
1060 | |
1061 | dev->trans_start = jiffies; | |
1062 | ||
3b6330ce SW |
1063 | /* The powerpc-specific eieio() is used, as wmb() has too strong |
1064 | * semantics (it requires synchronization between cacheable and | |
1065 | * uncacheable mappings, which eieio doesn't provide and which we | |
1066 | * don't need), thus requiring a more expensive sync instruction. At | |
1067 | * some point, the set of architecture-independent barrier functions | |
1068 | * should be expanded to include weaker barriers. | |
1069 | */ | |
1070 | ||
1071 | eieio(); | |
7f7f5316 AF |
1072 | txbdp->status = status; |
1073 | ||
1da177e4 LT |
1074 | /* If this was the last BD in the ring, the next one */ |
1075 | /* is at the beginning of the ring */ | |
1076 | if (txbdp->status & TXBD_WRAP) | |
1077 | txbdp = priv->tx_bd_base; | |
1078 | else | |
1079 | txbdp++; | |
1080 | ||
1081 | /* If the next BD still needs to be cleaned up, then the bds | |
1082 | are full. We need to tell the kernel to stop sending us stuff. */ | |
1083 | if (txbdp == priv->dirty_tx) { | |
1084 | netif_stop_queue(dev); | |
1085 | ||
09f75cd7 | 1086 | dev->stats.tx_fifo_errors++; |
1da177e4 LT |
1087 | } |
1088 | ||
1089 | /* Update the current txbd to the next one */ | |
1090 | priv->cur_tx = txbdp; | |
1091 | ||
1092 | /* Tell the DMA to go go go */ | |
1093 | gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT); | |
1094 | ||
1095 | /* Unlock priv */ | |
fef6108d | 1096 | spin_unlock_irqrestore(&priv->txlock, flags); |
1da177e4 LT |
1097 | |
1098 | return 0; | |
1099 | } | |
1100 | ||
1101 | /* Stops the kernel queue, and halts the controller */ | |
1102 | static int gfar_close(struct net_device *dev) | |
1103 | { | |
1104 | struct gfar_private *priv = netdev_priv(dev); | |
bea3348e SH |
1105 | |
1106 | napi_disable(&priv->napi); | |
1107 | ||
1da177e4 LT |
1108 | stop_gfar(dev); |
1109 | ||
bb40dcbb AF |
1110 | /* Disconnect from the PHY */ |
1111 | phy_disconnect(priv->phydev); | |
1112 | priv->phydev = NULL; | |
1da177e4 LT |
1113 | |
1114 | netif_stop_queue(dev); | |
1115 | ||
1116 | return 0; | |
1117 | } | |
1118 | ||
1da177e4 LT |
1119 | /* Changes the mac address if the controller is not running. */ |
1120 | int gfar_set_mac_address(struct net_device *dev) | |
1121 | { | |
7f7f5316 | 1122 | gfar_set_mac_for_addr(dev, 0, dev->dev_addr); |
1da177e4 LT |
1123 | |
1124 | return 0; | |
1125 | } | |
1126 | ||
1127 | ||
0bbaf069 KG |
1128 | /* Enables and disables VLAN insertion/extraction */ |
1129 | static void gfar_vlan_rx_register(struct net_device *dev, | |
1130 | struct vlan_group *grp) | |
1131 | { | |
1132 | struct gfar_private *priv = netdev_priv(dev); | |
1133 | unsigned long flags; | |
1134 | u32 tempval; | |
1135 | ||
fef6108d | 1136 | spin_lock_irqsave(&priv->rxlock, flags); |
0bbaf069 KG |
1137 | |
1138 | priv->vlgrp = grp; | |
1139 | ||
1140 | if (grp) { | |
1141 | /* Enable VLAN tag insertion */ | |
1142 | tempval = gfar_read(&priv->regs->tctrl); | |
1143 | tempval |= TCTRL_VLINS; | |
1144 | ||
1145 | gfar_write(&priv->regs->tctrl, tempval); | |
6aa20a22 | 1146 | |
0bbaf069 KG |
1147 | /* Enable VLAN tag extraction */ |
1148 | tempval = gfar_read(&priv->regs->rctrl); | |
1149 | tempval |= RCTRL_VLEX; | |
1150 | gfar_write(&priv->regs->rctrl, tempval); | |
1151 | } else { | |
1152 | /* Disable VLAN tag insertion */ | |
1153 | tempval = gfar_read(&priv->regs->tctrl); | |
1154 | tempval &= ~TCTRL_VLINS; | |
1155 | gfar_write(&priv->regs->tctrl, tempval); | |
1156 | ||
1157 | /* Disable VLAN tag extraction */ | |
1158 | tempval = gfar_read(&priv->regs->rctrl); | |
1159 | tempval &= ~RCTRL_VLEX; | |
1160 | gfar_write(&priv->regs->rctrl, tempval); | |
1161 | } | |
1162 | ||
fef6108d | 1163 | spin_unlock_irqrestore(&priv->rxlock, flags); |
0bbaf069 KG |
1164 | } |
1165 | ||
1da177e4 LT |
1166 | static int gfar_change_mtu(struct net_device *dev, int new_mtu) |
1167 | { | |
1168 | int tempsize, tempval; | |
1169 | struct gfar_private *priv = netdev_priv(dev); | |
1170 | int oldsize = priv->rx_buffer_size; | |
0bbaf069 KG |
1171 | int frame_size = new_mtu + ETH_HLEN; |
1172 | ||
1173 | if (priv->vlan_enable) | |
1174 | frame_size += VLAN_ETH_HLEN; | |
1175 | ||
1176 | if (gfar_uses_fcb(priv)) | |
1177 | frame_size += GMAC_FCB_LEN; | |
1178 | ||
1179 | frame_size += priv->padding; | |
1da177e4 LT |
1180 | |
1181 | if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) { | |
0bbaf069 KG |
1182 | if (netif_msg_drv(priv)) |
1183 | printk(KERN_ERR "%s: Invalid MTU setting\n", | |
1184 | dev->name); | |
1da177e4 LT |
1185 | return -EINVAL; |
1186 | } | |
1187 | ||
1188 | tempsize = | |
1189 | (frame_size & ~(INCREMENTAL_BUFFER_SIZE - 1)) + | |
1190 | INCREMENTAL_BUFFER_SIZE; | |
1191 | ||
1192 | /* Only stop and start the controller if it isn't already | |
7f7f5316 | 1193 | * stopped, and we changed something */ |
1da177e4 LT |
1194 | if ((oldsize != tempsize) && (dev->flags & IFF_UP)) |
1195 | stop_gfar(dev); | |
1196 | ||
1197 | priv->rx_buffer_size = tempsize; | |
1198 | ||
1199 | dev->mtu = new_mtu; | |
1200 | ||
1201 | gfar_write(&priv->regs->mrblr, priv->rx_buffer_size); | |
1202 | gfar_write(&priv->regs->maxfrm, priv->rx_buffer_size); | |
1203 | ||
1204 | /* If the mtu is larger than the max size for standard | |
1205 | * ethernet frames (ie, a jumbo frame), then set maccfg2 | |
1206 | * to allow huge frames, and to check the length */ | |
1207 | tempval = gfar_read(&priv->regs->maccfg2); | |
1208 | ||
1209 | if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE) | |
1210 | tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK); | |
1211 | else | |
1212 | tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK); | |
1213 | ||
1214 | gfar_write(&priv->regs->maccfg2, tempval); | |
1215 | ||
1216 | if ((oldsize != tempsize) && (dev->flags & IFF_UP)) | |
1217 | startup_gfar(dev); | |
1218 | ||
1219 | return 0; | |
1220 | } | |
1221 | ||
1222 | /* gfar_timeout gets called when a packet has not been | |
1223 | * transmitted after a set amount of time. | |
1224 | * For now, assume that clearing out all the structures, and | |
1225 | * starting over will fix the problem. */ | |
1226 | static void gfar_timeout(struct net_device *dev) | |
1227 | { | |
1228 | struct gfar_private *priv = netdev_priv(dev); | |
1229 | ||
09f75cd7 | 1230 | dev->stats.tx_errors++; |
1da177e4 LT |
1231 | |
1232 | if (dev->flags & IFF_UP) { | |
1233 | stop_gfar(dev); | |
1234 | startup_gfar(dev); | |
1235 | } | |
1236 | ||
1237 | netif_schedule(dev); | |
1238 | } | |
1239 | ||
1240 | /* Interrupt Handler for Transmit complete */ | |
7d12e780 | 1241 | static irqreturn_t gfar_transmit(int irq, void *dev_id) |
1da177e4 LT |
1242 | { |
1243 | struct net_device *dev = (struct net_device *) dev_id; | |
1244 | struct gfar_private *priv = netdev_priv(dev); | |
1245 | struct txbd8 *bdp; | |
1246 | ||
1247 | /* Clear IEVENT */ | |
1248 | gfar_write(&priv->regs->ievent, IEVENT_TX_MASK); | |
1249 | ||
1250 | /* Lock priv */ | |
fef6108d | 1251 | spin_lock(&priv->txlock); |
1da177e4 LT |
1252 | bdp = priv->dirty_tx; |
1253 | while ((bdp->status & TXBD_READY) == 0) { | |
1254 | /* If dirty_tx and cur_tx are the same, then either the */ | |
1255 | /* ring is empty or full now (it could only be full in the beginning, */ | |
1256 | /* obviously). If it is empty, we are done. */ | |
1257 | if ((bdp == priv->cur_tx) && (netif_queue_stopped(dev) == 0)) | |
1258 | break; | |
1259 | ||
09f75cd7 | 1260 | dev->stats.tx_packets++; |
1da177e4 LT |
1261 | |
1262 | /* Deferred means some collisions occurred during transmit, */ | |
1263 | /* but we eventually sent the packet. */ | |
1264 | if (bdp->status & TXBD_DEF) | |
09f75cd7 | 1265 | dev->stats.collisions++; |
1da177e4 LT |
1266 | |
1267 | /* Free the sk buffer associated with this TxBD */ | |
1268 | dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); | |
1269 | priv->tx_skbuff[priv->skb_dirtytx] = NULL; | |
1270 | priv->skb_dirtytx = | |
1271 | (priv->skb_dirtytx + | |
1272 | 1) & TX_RING_MOD_MASK(priv->tx_ring_size); | |
1273 | ||
1274 | /* update bdp to point at next bd in the ring (wrapping if necessary) */ | |
1275 | if (bdp->status & TXBD_WRAP) | |
1276 | bdp = priv->tx_bd_base; | |
1277 | else | |
1278 | bdp++; | |
1279 | ||
1280 | /* Move dirty_tx to be the next bd */ | |
1281 | priv->dirty_tx = bdp; | |
1282 | ||
1283 | /* We freed a buffer, so now we can restart transmission */ | |
1284 | if (netif_queue_stopped(dev)) | |
1285 | netif_wake_queue(dev); | |
1286 | } /* while ((bdp->status & TXBD_READY) == 0) */ | |
1287 | ||
1288 | /* If we are coalescing the interrupts, reset the timer */ | |
1289 | /* Otherwise, clear it */ | |
1290 | if (priv->txcoalescing) | |
1291 | gfar_write(&priv->regs->txic, | |
1292 | mk_ic_value(priv->txcount, priv->txtime)); | |
1293 | else | |
1294 | gfar_write(&priv->regs->txic, 0); | |
1295 | ||
fef6108d | 1296 | spin_unlock(&priv->txlock); |
1da177e4 LT |
1297 | |
1298 | return IRQ_HANDLED; | |
1299 | } | |
1300 | ||
1301 | struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) | |
1302 | { | |
7f7f5316 | 1303 | unsigned int alignamount; |
1da177e4 LT |
1304 | struct gfar_private *priv = netdev_priv(dev); |
1305 | struct sk_buff *skb = NULL; | |
1306 | unsigned int timeout = SKB_ALLOC_TIMEOUT; | |
1307 | ||
1308 | /* We have to allocate the skb, so keep trying till we succeed */ | |
1309 | while ((!skb) && timeout--) | |
1310 | skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT); | |
1311 | ||
bb40dcbb | 1312 | if (NULL == skb) |
1da177e4 LT |
1313 | return NULL; |
1314 | ||
7f7f5316 | 1315 | alignamount = RXBUF_ALIGNMENT - |
bea3348e | 1316 | (((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1)); |
7f7f5316 | 1317 | |
1da177e4 LT |
1318 | /* We need the data buffer to be aligned properly. We will reserve |
1319 | * as many bytes as needed to align the data properly | |
1320 | */ | |
7f7f5316 | 1321 | skb_reserve(skb, alignamount); |
1da177e4 | 1322 | |
1da177e4 | 1323 | bdp->bufPtr = dma_map_single(NULL, skb->data, |
7f7f5316 | 1324 | priv->rx_buffer_size, DMA_FROM_DEVICE); |
1da177e4 LT |
1325 | |
1326 | bdp->length = 0; | |
1327 | ||
1328 | /* Mark the buffer empty */ | |
3b6330ce | 1329 | eieio(); |
1da177e4 LT |
1330 | bdp->status |= (RXBD_EMPTY | RXBD_INTERRUPT); |
1331 | ||
1332 | return skb; | |
1333 | } | |
1334 | ||
1335 | static inline void count_errors(unsigned short status, struct gfar_private *priv) | |
1336 | { | |
09f75cd7 | 1337 | struct net_device_stats *stats = &dev->stats; |
1da177e4 LT |
1338 | struct gfar_extra_stats *estats = &priv->extra_stats; |
1339 | ||
1340 | /* If the packet was truncated, none of the other errors | |
1341 | * matter */ | |
1342 | if (status & RXBD_TRUNCATED) { | |
1343 | stats->rx_length_errors++; | |
1344 | ||
1345 | estats->rx_trunc++; | |
1346 | ||
1347 | return; | |
1348 | } | |
1349 | /* Count the errors, if there were any */ | |
1350 | if (status & (RXBD_LARGE | RXBD_SHORT)) { | |
1351 | stats->rx_length_errors++; | |
1352 | ||
1353 | if (status & RXBD_LARGE) | |
1354 | estats->rx_large++; | |
1355 | else | |
1356 | estats->rx_short++; | |
1357 | } | |
1358 | if (status & RXBD_NONOCTET) { | |
1359 | stats->rx_frame_errors++; | |
1360 | estats->rx_nonoctet++; | |
1361 | } | |
1362 | if (status & RXBD_CRCERR) { | |
1363 | estats->rx_crcerr++; | |
1364 | stats->rx_crc_errors++; | |
1365 | } | |
1366 | if (status & RXBD_OVERRUN) { | |
1367 | estats->rx_overrun++; | |
1368 | stats->rx_crc_errors++; | |
1369 | } | |
1370 | } | |
1371 | ||
7d12e780 | 1372 | irqreturn_t gfar_receive(int irq, void *dev_id) |
1da177e4 LT |
1373 | { |
1374 | struct net_device *dev = (struct net_device *) dev_id; | |
1375 | struct gfar_private *priv = netdev_priv(dev); | |
1da177e4 LT |
1376 | #ifdef CONFIG_GFAR_NAPI |
1377 | u32 tempval; | |
fef6108d AF |
1378 | #else |
1379 | unsigned long flags; | |
1da177e4 LT |
1380 | #endif |
1381 | ||
1382 | /* Clear IEVENT, so rx interrupt isn't called again | |
1383 | * because of this interrupt */ | |
1384 | gfar_write(&priv->regs->ievent, IEVENT_RX_MASK); | |
1385 | ||
1386 | /* support NAPI */ | |
1387 | #ifdef CONFIG_GFAR_NAPI | |
bea3348e | 1388 | if (netif_rx_schedule_prep(dev, &priv->napi)) { |
1da177e4 LT |
1389 | tempval = gfar_read(&priv->regs->imask); |
1390 | tempval &= IMASK_RX_DISABLED; | |
1391 | gfar_write(&priv->regs->imask, tempval); | |
1392 | ||
bea3348e | 1393 | __netif_rx_schedule(dev, &priv->napi); |
1da177e4 | 1394 | } else { |
0bbaf069 KG |
1395 | if (netif_msg_rx_err(priv)) |
1396 | printk(KERN_DEBUG "%s: receive called twice (%x)[%x]\n", | |
1397 | dev->name, gfar_read(&priv->regs->ievent), | |
1398 | gfar_read(&priv->regs->imask)); | |
1da177e4 LT |
1399 | } |
1400 | #else | |
1401 | ||
fef6108d | 1402 | spin_lock_irqsave(&priv->rxlock, flags); |
1da177e4 LT |
1403 | gfar_clean_rx_ring(dev, priv->rx_ring_size); |
1404 | ||
1405 | /* If we are coalescing interrupts, update the timer */ | |
1406 | /* Otherwise, clear it */ | |
1407 | if (priv->rxcoalescing) | |
1408 | gfar_write(&priv->regs->rxic, | |
1409 | mk_ic_value(priv->rxcount, priv->rxtime)); | |
1410 | else | |
1411 | gfar_write(&priv->regs->rxic, 0); | |
1412 | ||
fef6108d | 1413 | spin_unlock_irqrestore(&priv->rxlock, flags); |
1da177e4 LT |
1414 | #endif |
1415 | ||
1416 | return IRQ_HANDLED; | |
1417 | } | |
1418 | ||
0bbaf069 KG |
1419 | static inline int gfar_rx_vlan(struct sk_buff *skb, |
1420 | struct vlan_group *vlgrp, unsigned short vlctl) | |
1421 | { | |
1422 | #ifdef CONFIG_GFAR_NAPI | |
1423 | return vlan_hwaccel_receive_skb(skb, vlgrp, vlctl); | |
1424 | #else | |
1425 | return vlan_hwaccel_rx(skb, vlgrp, vlctl); | |
1426 | #endif | |
1427 | } | |
1428 | ||
1429 | static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) | |
1430 | { | |
1431 | /* If valid headers were found, and valid sums | |
1432 | * were verified, then we tell the kernel that no | |
1433 | * checksumming is necessary. Otherwise, it is */ | |
7f7f5316 | 1434 | if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU)) |
0bbaf069 KG |
1435 | skb->ip_summed = CHECKSUM_UNNECESSARY; |
1436 | else | |
1437 | skb->ip_summed = CHECKSUM_NONE; | |
1438 | } | |
1439 | ||
1440 | ||
1441 | static inline struct rxfcb *gfar_get_fcb(struct sk_buff *skb) | |
1442 | { | |
1443 | struct rxfcb *fcb = (struct rxfcb *)skb->data; | |
1444 | ||
1445 | /* Remove the FCB from the skb */ | |
1446 | skb_pull(skb, GMAC_FCB_LEN); | |
1447 | ||
1448 | return fcb; | |
1449 | } | |
1da177e4 LT |
1450 | |
1451 | /* gfar_process_frame() -- handle one incoming packet if skb | |
1452 | * isn't NULL. */ | |
1453 | static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, | |
1454 | int length) | |
1455 | { | |
1456 | struct gfar_private *priv = netdev_priv(dev); | |
0bbaf069 | 1457 | struct rxfcb *fcb = NULL; |
1da177e4 | 1458 | |
bb40dcbb | 1459 | if (NULL == skb) { |
0bbaf069 KG |
1460 | if (netif_msg_rx_err(priv)) |
1461 | printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name); | |
09f75cd7 | 1462 | dev->stats.rx_dropped++; |
1da177e4 LT |
1463 | priv->extra_stats.rx_skbmissing++; |
1464 | } else { | |
0bbaf069 KG |
1465 | int ret; |
1466 | ||
1da177e4 LT |
1467 | /* Prep the skb for the packet */ |
1468 | skb_put(skb, length); | |
1469 | ||
0bbaf069 KG |
1470 | /* Grab the FCB if there is one */ |
1471 | if (gfar_uses_fcb(priv)) | |
1472 | fcb = gfar_get_fcb(skb); | |
1473 | ||
1474 | /* Remove the padded bytes, if there are any */ | |
1475 | if (priv->padding) | |
1476 | skb_pull(skb, priv->padding); | |
1477 | ||
1478 | if (priv->rx_csum_enable) | |
1479 | gfar_rx_checksum(skb, fcb); | |
1480 | ||
1da177e4 LT |
1481 | /* Tell the skb what kind of packet this is */ |
1482 | skb->protocol = eth_type_trans(skb, dev); | |
1483 | ||
1484 | /* Send the packet up the stack */ | |
7f7f5316 | 1485 | if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN))) |
0bbaf069 KG |
1486 | ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl); |
1487 | else | |
1488 | ret = RECEIVE(skb); | |
1489 | ||
1490 | if (NET_RX_DROP == ret) | |
1da177e4 | 1491 | priv->extra_stats.kernel_dropped++; |
1da177e4 LT |
1492 | } |
1493 | ||
1494 | return 0; | |
1495 | } | |
1496 | ||
1497 | /* gfar_clean_rx_ring() -- Processes each frame in the rx ring | |
0bbaf069 | 1498 | * until the budget/quota has been reached. Returns the number |
1da177e4 LT |
1499 | * of frames handled |
1500 | */ | |
0bbaf069 | 1501 | int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) |
1da177e4 LT |
1502 | { |
1503 | struct rxbd8 *bdp; | |
1504 | struct sk_buff *skb; | |
1505 | u16 pkt_len; | |
1506 | int howmany = 0; | |
1507 | struct gfar_private *priv = netdev_priv(dev); | |
1508 | ||
1509 | /* Get the first full descriptor */ | |
1510 | bdp = priv->cur_rx; | |
1511 | ||
1512 | while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) { | |
3b6330ce | 1513 | rmb(); |
1da177e4 LT |
1514 | skb = priv->rx_skbuff[priv->skb_currx]; |
1515 | ||
1516 | if (!(bdp->status & | |
1517 | (RXBD_LARGE | RXBD_SHORT | RXBD_NONOCTET | |
1518 | | RXBD_CRCERR | RXBD_OVERRUN | RXBD_TRUNCATED))) { | |
1519 | /* Increment the number of packets */ | |
09f75cd7 | 1520 | dev->stats.rx_packets++; |
1da177e4 LT |
1521 | howmany++; |
1522 | ||
1523 | /* Remove the FCS from the packet length */ | |
1524 | pkt_len = bdp->length - 4; | |
1525 | ||
1526 | gfar_process_frame(dev, skb, pkt_len); | |
1527 | ||
09f75cd7 | 1528 | dev->stats.rx_bytes += pkt_len; |
1da177e4 LT |
1529 | } else { |
1530 | count_errors(bdp->status, priv); | |
1531 | ||
1532 | if (skb) | |
1533 | dev_kfree_skb_any(skb); | |
1534 | ||
1535 | priv->rx_skbuff[priv->skb_currx] = NULL; | |
1536 | } | |
1537 | ||
1538 | dev->last_rx = jiffies; | |
1539 | ||
1540 | /* Clear the status flags for this buffer */ | |
1541 | bdp->status &= ~RXBD_STATS; | |
1542 | ||
1543 | /* Add another skb for the future */ | |
1544 | skb = gfar_new_skb(dev, bdp); | |
1545 | priv->rx_skbuff[priv->skb_currx] = skb; | |
1546 | ||
1547 | /* Update to the next pointer */ | |
1548 | if (bdp->status & RXBD_WRAP) | |
1549 | bdp = priv->rx_bd_base; | |
1550 | else | |
1551 | bdp++; | |
1552 | ||
1553 | /* update to point at the next skb */ | |
1554 | priv->skb_currx = | |
1555 | (priv->skb_currx + | |
1556 | 1) & RX_RING_MOD_MASK(priv->rx_ring_size); | |
1557 | ||
1558 | } | |
1559 | ||
1560 | /* Update the current rxbd pointer to be the next one */ | |
1561 | priv->cur_rx = bdp; | |
1562 | ||
1da177e4 LT |
1563 | return howmany; |
1564 | } | |
1565 | ||
1566 | #ifdef CONFIG_GFAR_NAPI | |
bea3348e | 1567 | static int gfar_poll(struct napi_struct *napi, int budget) |
1da177e4 | 1568 | { |
bea3348e SH |
1569 | struct gfar_private *priv = container_of(napi, struct gfar_private, napi); |
1570 | struct net_device *dev = priv->dev; | |
1da177e4 | 1571 | int howmany; |
1da177e4 | 1572 | |
bea3348e | 1573 | howmany = gfar_clean_rx_ring(dev, budget); |
1da177e4 | 1574 | |
bea3348e SH |
1575 | if (howmany < budget) { |
1576 | netif_rx_complete(dev, napi); | |
1da177e4 LT |
1577 | |
1578 | /* Clear the halt bit in RSTAT */ | |
1579 | gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT); | |
1580 | ||
1581 | gfar_write(&priv->regs->imask, IMASK_DEFAULT); | |
1582 | ||
1583 | /* If we are coalescing interrupts, update the timer */ | |
1584 | /* Otherwise, clear it */ | |
1585 | if (priv->rxcoalescing) | |
1586 | gfar_write(&priv->regs->rxic, | |
1587 | mk_ic_value(priv->rxcount, priv->rxtime)); | |
1588 | else | |
1589 | gfar_write(&priv->regs->rxic, 0); | |
1da177e4 LT |
1590 | } |
1591 | ||
bea3348e | 1592 | return howmany; |
1da177e4 LT |
1593 | } |
1594 | #endif | |
1595 | ||
f2d71c2d VW |
1596 | #ifdef CONFIG_NET_POLL_CONTROLLER |
1597 | /* | |
1598 | * Polling 'interrupt' - used by things like netconsole to send skbs | |
1599 | * without having to re-enable interrupts. It's not called while | |
1600 | * the interrupt routine is executing. | |
1601 | */ | |
1602 | static void gfar_netpoll(struct net_device *dev) | |
1603 | { | |
1604 | struct gfar_private *priv = netdev_priv(dev); | |
1605 | ||
1606 | /* If the device has multiple interrupts, run tx/rx */ | |
1607 | if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { | |
1608 | disable_irq(priv->interruptTransmit); | |
1609 | disable_irq(priv->interruptReceive); | |
1610 | disable_irq(priv->interruptError); | |
1611 | gfar_interrupt(priv->interruptTransmit, dev); | |
1612 | enable_irq(priv->interruptError); | |
1613 | enable_irq(priv->interruptReceive); | |
1614 | enable_irq(priv->interruptTransmit); | |
1615 | } else { | |
1616 | disable_irq(priv->interruptTransmit); | |
1617 | gfar_interrupt(priv->interruptTransmit, dev); | |
1618 | enable_irq(priv->interruptTransmit); | |
1619 | } | |
1620 | } | |
1621 | #endif | |
1622 | ||
1da177e4 | 1623 | /* The interrupt handler for devices with one interrupt */ |
7d12e780 | 1624 | static irqreturn_t gfar_interrupt(int irq, void *dev_id) |
1da177e4 LT |
1625 | { |
1626 | struct net_device *dev = dev_id; | |
1627 | struct gfar_private *priv = netdev_priv(dev); | |
1628 | ||
1629 | /* Save ievent for future reference */ | |
1630 | u32 events = gfar_read(&priv->regs->ievent); | |
1631 | ||
1da177e4 | 1632 | /* Check for reception */ |
538cc7ee | 1633 | if (events & IEVENT_RX_MASK) |
7d12e780 | 1634 | gfar_receive(irq, dev_id); |
1da177e4 LT |
1635 | |
1636 | /* Check for transmit completion */ | |
538cc7ee | 1637 | if (events & IEVENT_TX_MASK) |
7d12e780 | 1638 | gfar_transmit(irq, dev_id); |
1da177e4 | 1639 | |
538cc7ee SS |
1640 | /* Check for errors */ |
1641 | if (events & IEVENT_ERR_MASK) | |
1642 | gfar_error(irq, dev_id); | |
1da177e4 LT |
1643 | |
1644 | return IRQ_HANDLED; | |
1645 | } | |
1646 | ||
1da177e4 LT |
1647 | /* Called every time the controller might need to be made |
1648 | * aware of new link state. The PHY code conveys this | |
bb40dcbb | 1649 | * information through variables in the phydev structure, and this |
1da177e4 LT |
1650 | * function converts those variables into the appropriate |
1651 | * register values, and can bring down the device if needed. | |
1652 | */ | |
1653 | static void adjust_link(struct net_device *dev) | |
1654 | { | |
1655 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 1656 | struct gfar __iomem *regs = priv->regs; |
bb40dcbb AF |
1657 | unsigned long flags; |
1658 | struct phy_device *phydev = priv->phydev; | |
1659 | int new_state = 0; | |
1660 | ||
fef6108d | 1661 | spin_lock_irqsave(&priv->txlock, flags); |
bb40dcbb AF |
1662 | if (phydev->link) { |
1663 | u32 tempval = gfar_read(®s->maccfg2); | |
7f7f5316 | 1664 | u32 ecntrl = gfar_read(®s->ecntrl); |
1da177e4 | 1665 | |
1da177e4 LT |
1666 | /* Now we make sure that we can be in full duplex mode. |
1667 | * If not, we operate in half-duplex mode. */ | |
bb40dcbb AF |
1668 | if (phydev->duplex != priv->oldduplex) { |
1669 | new_state = 1; | |
1670 | if (!(phydev->duplex)) | |
1da177e4 | 1671 | tempval &= ~(MACCFG2_FULL_DUPLEX); |
bb40dcbb | 1672 | else |
1da177e4 | 1673 | tempval |= MACCFG2_FULL_DUPLEX; |
1da177e4 | 1674 | |
bb40dcbb | 1675 | priv->oldduplex = phydev->duplex; |
1da177e4 LT |
1676 | } |
1677 | ||
bb40dcbb AF |
1678 | if (phydev->speed != priv->oldspeed) { |
1679 | new_state = 1; | |
1680 | switch (phydev->speed) { | |
1da177e4 | 1681 | case 1000: |
1da177e4 LT |
1682 | tempval = |
1683 | ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); | |
1da177e4 LT |
1684 | break; |
1685 | case 100: | |
1686 | case 10: | |
1da177e4 LT |
1687 | tempval = |
1688 | ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); | |
7f7f5316 AF |
1689 | |
1690 | /* Reduced mode distinguishes | |
1691 | * between 10 and 100 */ | |
1692 | if (phydev->speed == SPEED_100) | |
1693 | ecntrl |= ECNTRL_R100; | |
1694 | else | |
1695 | ecntrl &= ~(ECNTRL_R100); | |
1da177e4 LT |
1696 | break; |
1697 | default: | |
0bbaf069 KG |
1698 | if (netif_msg_link(priv)) |
1699 | printk(KERN_WARNING | |
bb40dcbb AF |
1700 | "%s: Ack! Speed (%d) is not 10/100/1000!\n", |
1701 | dev->name, phydev->speed); | |
1da177e4 LT |
1702 | break; |
1703 | } | |
1704 | ||
bb40dcbb | 1705 | priv->oldspeed = phydev->speed; |
1da177e4 LT |
1706 | } |
1707 | ||
bb40dcbb | 1708 | gfar_write(®s->maccfg2, tempval); |
7f7f5316 | 1709 | gfar_write(®s->ecntrl, ecntrl); |
bb40dcbb | 1710 | |
1da177e4 | 1711 | if (!priv->oldlink) { |
bb40dcbb | 1712 | new_state = 1; |
1da177e4 | 1713 | priv->oldlink = 1; |
1da177e4 LT |
1714 | netif_schedule(dev); |
1715 | } | |
bb40dcbb AF |
1716 | } else if (priv->oldlink) { |
1717 | new_state = 1; | |
1718 | priv->oldlink = 0; | |
1719 | priv->oldspeed = 0; | |
1720 | priv->oldduplex = -1; | |
1da177e4 | 1721 | } |
1da177e4 | 1722 | |
bb40dcbb AF |
1723 | if (new_state && netif_msg_link(priv)) |
1724 | phy_print_status(phydev); | |
1725 | ||
fef6108d | 1726 | spin_unlock_irqrestore(&priv->txlock, flags); |
bb40dcbb | 1727 | } |
1da177e4 LT |
1728 | |
1729 | /* Update the hash table based on the current list of multicast | |
1730 | * addresses we subscribe to. Also, change the promiscuity of | |
1731 | * the device based on the flags (this function is called | |
1732 | * whenever dev->flags is changed */ | |
1733 | static void gfar_set_multi(struct net_device *dev) | |
1734 | { | |
1735 | struct dev_mc_list *mc_ptr; | |
1736 | struct gfar_private *priv = netdev_priv(dev); | |
cc8c6e37 | 1737 | struct gfar __iomem *regs = priv->regs; |
1da177e4 LT |
1738 | u32 tempval; |
1739 | ||
1740 | if(dev->flags & IFF_PROMISC) { | |
1da177e4 LT |
1741 | /* Set RCTRL to PROM */ |
1742 | tempval = gfar_read(®s->rctrl); | |
1743 | tempval |= RCTRL_PROM; | |
1744 | gfar_write(®s->rctrl, tempval); | |
1745 | } else { | |
1746 | /* Set RCTRL to not PROM */ | |
1747 | tempval = gfar_read(®s->rctrl); | |
1748 | tempval &= ~(RCTRL_PROM); | |
1749 | gfar_write(®s->rctrl, tempval); | |
1750 | } | |
6aa20a22 | 1751 | |
1da177e4 LT |
1752 | if(dev->flags & IFF_ALLMULTI) { |
1753 | /* Set the hash to rx all multicast frames */ | |
0bbaf069 KG |
1754 | gfar_write(®s->igaddr0, 0xffffffff); |
1755 | gfar_write(®s->igaddr1, 0xffffffff); | |
1756 | gfar_write(®s->igaddr2, 0xffffffff); | |
1757 | gfar_write(®s->igaddr3, 0xffffffff); | |
1758 | gfar_write(®s->igaddr4, 0xffffffff); | |
1759 | gfar_write(®s->igaddr5, 0xffffffff); | |
1760 | gfar_write(®s->igaddr6, 0xffffffff); | |
1761 | gfar_write(®s->igaddr7, 0xffffffff); | |
1da177e4 LT |
1762 | gfar_write(®s->gaddr0, 0xffffffff); |
1763 | gfar_write(®s->gaddr1, 0xffffffff); | |
1764 | gfar_write(®s->gaddr2, 0xffffffff); | |
1765 | gfar_write(®s->gaddr3, 0xffffffff); | |
1766 | gfar_write(®s->gaddr4, 0xffffffff); | |
1767 | gfar_write(®s->gaddr5, 0xffffffff); | |
1768 | gfar_write(®s->gaddr6, 0xffffffff); | |
1769 | gfar_write(®s->gaddr7, 0xffffffff); | |
1770 | } else { | |
7f7f5316 AF |
1771 | int em_num; |
1772 | int idx; | |
1773 | ||
1da177e4 | 1774 | /* zero out the hash */ |
0bbaf069 KG |
1775 | gfar_write(®s->igaddr0, 0x0); |
1776 | gfar_write(®s->igaddr1, 0x0); | |
1777 | gfar_write(®s->igaddr2, 0x0); | |
1778 | gfar_write(®s->igaddr3, 0x0); | |
1779 | gfar_write(®s->igaddr4, 0x0); | |
1780 | gfar_write(®s->igaddr5, 0x0); | |
1781 | gfar_write(®s->igaddr6, 0x0); | |
1782 | gfar_write(®s->igaddr7, 0x0); | |
1da177e4 LT |
1783 | gfar_write(®s->gaddr0, 0x0); |
1784 | gfar_write(®s->gaddr1, 0x0); | |
1785 | gfar_write(®s->gaddr2, 0x0); | |
1786 | gfar_write(®s->gaddr3, 0x0); | |
1787 | gfar_write(®s->gaddr4, 0x0); | |
1788 | gfar_write(®s->gaddr5, 0x0); | |
1789 | gfar_write(®s->gaddr6, 0x0); | |
1790 | gfar_write(®s->gaddr7, 0x0); | |
1791 | ||
7f7f5316 AF |
1792 | /* If we have extended hash tables, we need to |
1793 | * clear the exact match registers to prepare for | |
1794 | * setting them */ | |
1795 | if (priv->extended_hash) { | |
1796 | em_num = GFAR_EM_NUM + 1; | |
1797 | gfar_clear_exact_match(dev); | |
1798 | idx = 1; | |
1799 | } else { | |
1800 | idx = 0; | |
1801 | em_num = 0; | |
1802 | } | |
1803 | ||
1da177e4 LT |
1804 | if(dev->mc_count == 0) |
1805 | return; | |
1806 | ||
1807 | /* Parse the list, and set the appropriate bits */ | |
1808 | for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { | |
7f7f5316 AF |
1809 | if (idx < em_num) { |
1810 | gfar_set_mac_for_addr(dev, idx, | |
1811 | mc_ptr->dmi_addr); | |
1812 | idx++; | |
1813 | } else | |
1814 | gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr); | |
1da177e4 LT |
1815 | } |
1816 | } | |
1817 | ||
1818 | return; | |
1819 | } | |
1820 | ||
7f7f5316 AF |
1821 | |
1822 | /* Clears each of the exact match registers to zero, so they | |
1823 | * don't interfere with normal reception */ | |
1824 | static void gfar_clear_exact_match(struct net_device *dev) | |
1825 | { | |
1826 | int idx; | |
1827 | u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0}; | |
1828 | ||
1829 | for(idx = 1;idx < GFAR_EM_NUM + 1;idx++) | |
1830 | gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr); | |
1831 | } | |
1832 | ||
1da177e4 LT |
1833 | /* Set the appropriate hash bit for the given addr */ |
1834 | /* The algorithm works like so: | |
1835 | * 1) Take the Destination Address (ie the multicast address), and | |
1836 | * do a CRC on it (little endian), and reverse the bits of the | |
1837 | * result. | |
1838 | * 2) Use the 8 most significant bits as a hash into a 256-entry | |
1839 | * table. The table is controlled through 8 32-bit registers: | |
1840 | * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is | |
1841 | * gaddr7. This means that the 3 most significant bits in the | |
1842 | * hash index which gaddr register to use, and the 5 other bits | |
1843 | * indicate which bit (assuming an IBM numbering scheme, which | |
1844 | * for PowerPC (tm) is usually the case) in the register holds | |
1845 | * the entry. */ | |
1846 | static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr) | |
1847 | { | |
1848 | u32 tempval; | |
1849 | struct gfar_private *priv = netdev_priv(dev); | |
1da177e4 | 1850 | u32 result = ether_crc(MAC_ADDR_LEN, addr); |
0bbaf069 KG |
1851 | int width = priv->hash_width; |
1852 | u8 whichbit = (result >> (32 - width)) & 0x1f; | |
1853 | u8 whichreg = result >> (32 - width + 5); | |
1da177e4 LT |
1854 | u32 value = (1 << (31-whichbit)); |
1855 | ||
0bbaf069 | 1856 | tempval = gfar_read(priv->hash_regs[whichreg]); |
1da177e4 | 1857 | tempval |= value; |
0bbaf069 | 1858 | gfar_write(priv->hash_regs[whichreg], tempval); |
1da177e4 LT |
1859 | |
1860 | return; | |
1861 | } | |
1862 | ||
7f7f5316 AF |
1863 | |
1864 | /* There are multiple MAC Address register pairs on some controllers | |
1865 | * This function sets the numth pair to a given address | |
1866 | */ | |
1867 | static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr) | |
1868 | { | |
1869 | struct gfar_private *priv = netdev_priv(dev); | |
1870 | int idx; | |
1871 | char tmpbuf[MAC_ADDR_LEN]; | |
1872 | u32 tempval; | |
cc8c6e37 | 1873 | u32 __iomem *macptr = &priv->regs->macstnaddr1; |
7f7f5316 AF |
1874 | |
1875 | macptr += num*2; | |
1876 | ||
1877 | /* Now copy it into the mac registers backwards, cuz */ | |
1878 | /* little endian is silly */ | |
1879 | for (idx = 0; idx < MAC_ADDR_LEN; idx++) | |
1880 | tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx]; | |
1881 | ||
1882 | gfar_write(macptr, *((u32 *) (tmpbuf))); | |
1883 | ||
1884 | tempval = *((u32 *) (tmpbuf + 4)); | |
1885 | ||
1886 | gfar_write(macptr+1, tempval); | |
1887 | } | |
1888 | ||
1da177e4 | 1889 | /* GFAR error interrupt handler */ |
7d12e780 | 1890 | static irqreturn_t gfar_error(int irq, void *dev_id) |
1da177e4 LT |
1891 | { |
1892 | struct net_device *dev = dev_id; | |
1893 | struct gfar_private *priv = netdev_priv(dev); | |
1894 | ||
1895 | /* Save ievent for future reference */ | |
1896 | u32 events = gfar_read(&priv->regs->ievent); | |
1897 | ||
1898 | /* Clear IEVENT */ | |
1899 | gfar_write(&priv->regs->ievent, IEVENT_ERR_MASK); | |
1900 | ||
1901 | /* Hmm... */ | |
0bbaf069 KG |
1902 | if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv)) |
1903 | printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n", | |
538cc7ee | 1904 | dev->name, events, gfar_read(&priv->regs->imask)); |
1da177e4 LT |
1905 | |
1906 | /* Update the error counters */ | |
1907 | if (events & IEVENT_TXE) { | |
09f75cd7 | 1908 | dev->stats.tx_errors++; |
1da177e4 LT |
1909 | |
1910 | if (events & IEVENT_LC) | |
09f75cd7 | 1911 | dev->stats.tx_window_errors++; |
1da177e4 | 1912 | if (events & IEVENT_CRL) |
09f75cd7 | 1913 | dev->stats.tx_aborted_errors++; |
1da177e4 | 1914 | if (events & IEVENT_XFUN) { |
0bbaf069 | 1915 | if (netif_msg_tx_err(priv)) |
538cc7ee SS |
1916 | printk(KERN_DEBUG "%s: TX FIFO underrun, " |
1917 | "packet dropped.\n", dev->name); | |
09f75cd7 | 1918 | dev->stats.tx_dropped++; |
1da177e4 LT |
1919 | priv->extra_stats.tx_underrun++; |
1920 | ||
1921 | /* Reactivate the Tx Queues */ | |
1922 | gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT); | |
1923 | } | |
0bbaf069 KG |
1924 | if (netif_msg_tx_err(priv)) |
1925 | printk(KERN_DEBUG "%s: Transmit Error\n", dev->name); | |
1da177e4 LT |
1926 | } |
1927 | if (events & IEVENT_BSY) { | |
09f75cd7 | 1928 | dev->stats.rx_errors++; |
1da177e4 LT |
1929 | priv->extra_stats.rx_bsy++; |
1930 | ||
7d12e780 | 1931 | gfar_receive(irq, dev_id); |
1da177e4 LT |
1932 | |
1933 | #ifndef CONFIG_GFAR_NAPI | |
1934 | /* Clear the halt bit in RSTAT */ | |
1935 | gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT); | |
1936 | #endif | |
1937 | ||
0bbaf069 | 1938 | if (netif_msg_rx_err(priv)) |
538cc7ee SS |
1939 | printk(KERN_DEBUG "%s: busy error (rstat: %x)\n", |
1940 | dev->name, gfar_read(&priv->regs->rstat)); | |
1da177e4 LT |
1941 | } |
1942 | if (events & IEVENT_BABR) { | |
09f75cd7 | 1943 | dev->stats.rx_errors++; |
1da177e4 LT |
1944 | priv->extra_stats.rx_babr++; |
1945 | ||
0bbaf069 | 1946 | if (netif_msg_rx_err(priv)) |
538cc7ee | 1947 | printk(KERN_DEBUG "%s: babbling RX error\n", dev->name); |
1da177e4 LT |
1948 | } |
1949 | if (events & IEVENT_EBERR) { | |
1950 | priv->extra_stats.eberr++; | |
0bbaf069 | 1951 | if (netif_msg_rx_err(priv)) |
538cc7ee | 1952 | printk(KERN_DEBUG "%s: bus error\n", dev->name); |
1da177e4 | 1953 | } |
0bbaf069 | 1954 | if ((events & IEVENT_RXC) && netif_msg_rx_status(priv)) |
538cc7ee | 1955 | printk(KERN_DEBUG "%s: control frame\n", dev->name); |
1da177e4 LT |
1956 | |
1957 | if (events & IEVENT_BABT) { | |
1958 | priv->extra_stats.tx_babt++; | |
0bbaf069 | 1959 | if (netif_msg_tx_err(priv)) |
538cc7ee | 1960 | printk(KERN_DEBUG "%s: babbling TX error\n", dev->name); |
1da177e4 LT |
1961 | } |
1962 | return IRQ_HANDLED; | |
1963 | } | |
1964 | ||
1965 | /* Structure for a device driver */ | |
3ae5eaec | 1966 | static struct platform_driver gfar_driver = { |
1da177e4 LT |
1967 | .probe = gfar_probe, |
1968 | .remove = gfar_remove, | |
3ae5eaec RK |
1969 | .driver = { |
1970 | .name = "fsl-gianfar", | |
1971 | }, | |
1da177e4 LT |
1972 | }; |
1973 | ||
1974 | static int __init gfar_init(void) | |
1975 | { | |
bb40dcbb AF |
1976 | int err = gfar_mdio_init(); |
1977 | ||
1978 | if (err) | |
1979 | return err; | |
1980 | ||
3ae5eaec | 1981 | err = platform_driver_register(&gfar_driver); |
bb40dcbb AF |
1982 | |
1983 | if (err) | |
1984 | gfar_mdio_exit(); | |
6aa20a22 | 1985 | |
bb40dcbb | 1986 | return err; |
1da177e4 LT |
1987 | } |
1988 | ||
1989 | static void __exit gfar_exit(void) | |
1990 | { | |
3ae5eaec | 1991 | platform_driver_unregister(&gfar_driver); |
bb40dcbb | 1992 | gfar_mdio_exit(); |
1da177e4 LT |
1993 | } |
1994 | ||
1995 | module_init(gfar_init); | |
1996 | module_exit(gfar_exit); | |
1997 |