[linux-2.6-block.git] / drivers / net / ethernet / ezchip / nps_enet.c

/*
 * Copyright(c) 2015 EZchip Technologies.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * The full GNU General Public License is included in this distribution in
 * the file called "COPYING".
 */

#include <linux/module.h>
#include <linux/etherdevice.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include "nps_enet.h"

#define DRV_NAME			"nps_mgt_enet"

static void nps_enet_clean_rx_fifo(struct net_device *ndev, u32 frame_len)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 i, len = DIV_ROUND_UP(frame_len, sizeof(u32));

	/* Empty Rx FIFO buffer by reading all words */
	for (i = 0; i < len; i++)
		nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
}

static void nps_enet_read_rx_fifo(struct net_device *ndev,
				  unsigned char *dst, u32 length)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	s32 i, last = length & (sizeof(u32) - 1);
	u32 *reg = (u32 *)dst, len = length / sizeof(u32);
	bool dst_is_aligned = IS_ALIGNED((unsigned long)dst, sizeof(u32));

	/* In case dst is not aligned we need an intermediate buffer */
	if (dst_is_aligned) {
		ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, reg, len);
		reg += len;
	}
	else { /* !dst_is_aligned */
		for (i = 0; i < len; i++, reg++) {
			u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
			put_unaligned_be32(buf, reg);
		}
	}
	/* copy last bytes (if any) */
	if (last) {
		u32 buf;
		ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, &buf, 1);
		memcpy((u8 *)reg, &buf, last);
	}
}

static u32 nps_enet_rx_handler(struct net_device *ndev)
{
	u32 frame_len, err = 0;
	u32 work_done = 0;
	struct nps_enet_priv *priv = netdev_priv(ndev);
	struct sk_buff *skb;
	u32 rx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL);
	u32 rx_ctrl_cr = (rx_ctrl_value & RX_CTL_CR_MASK) >> RX_CTL_CR_SHIFT;
	u32 rx_ctrl_er = (rx_ctrl_value & RX_CTL_ER_MASK) >> RX_CTL_ER_SHIFT;
	u32 rx_ctrl_crc = (rx_ctrl_value & RX_CTL_CRC_MASK) >> RX_CTL_CRC_SHIFT;

	frame_len = (rx_ctrl_value & RX_CTL_NR_MASK) >> RX_CTL_NR_SHIFT;

	/* Check if we got RX */
	if (!rx_ctrl_cr)
		return work_done;

	/* If we got here there is a work for us */
	work_done++;

	/* Check Rx error */
	if (rx_ctrl_er) {
		ndev->stats.rx_errors++;
		err = 1;
	}

	/* Check Rx CRC error */
	if (rx_ctrl_crc) {
		ndev->stats.rx_crc_errors++;
		ndev->stats.rx_dropped++;
		err = 1;
	}

	/* Check Frame length Min 64b */
	if (unlikely(frame_len < ETH_ZLEN)) {
		ndev->stats.rx_length_errors++;
		ndev->stats.rx_dropped++;
		err = 1;
	}

	if (err)
		goto rx_irq_clean;

	/* Skb allocation */
	skb = netdev_alloc_skb_ip_align(ndev, frame_len);
	if (unlikely(!skb)) {
		ndev->stats.rx_errors++;
		ndev->stats.rx_dropped++;
		goto rx_irq_clean;
	}

	/* Copy frame from Rx fifo into the skb */
	nps_enet_read_rx_fifo(ndev, skb->data, frame_len);

	skb_put(skb, frame_len);
	skb->protocol = eth_type_trans(skb, ndev);
	skb->ip_summed = CHECKSUM_UNNECESSARY;

	ndev->stats.rx_packets++;
	ndev->stats.rx_bytes += frame_len;
	netif_receive_skb(skb);

	goto rx_irq_frame_done;

rx_irq_clean:
	/* Clean Rx fifo */
	nps_enet_clean_rx_fifo(ndev, frame_len);

rx_irq_frame_done:
	/* Ack Rx ctrl register */
	nps_enet_reg_set(priv, NPS_ENET_REG_RX_CTL, 0);

	return work_done;
}

static void nps_enet_tx_handler(struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 tx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL);
	u32 tx_ctrl_ct = (tx_ctrl_value & TX_CTL_CT_MASK) >> TX_CTL_CT_SHIFT;
	u32 tx_ctrl_et = (tx_ctrl_value & TX_CTL_ET_MASK) >> TX_CTL_ET_SHIFT;
	u32 tx_ctrl_nt = (tx_ctrl_value & TX_CTL_NT_MASK) >> TX_CTL_NT_SHIFT;

	/* Check if we got TX */
	if (!priv->tx_skb || tx_ctrl_ct)
		return;

	/* Ack Tx ctrl register */
	nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, 0);

	/* Check Tx transmit error */
	if (unlikely(tx_ctrl_et)) {
		ndev->stats.tx_errors++;
	} else {
		ndev->stats.tx_packets++;
		ndev->stats.tx_bytes += tx_ctrl_nt;
	}

	dev_kfree_skb(priv->tx_skb);
	priv->tx_skb = NULL;

	if (netif_queue_stopped(ndev))
		netif_wake_queue(ndev);
}

/**
 * nps_enet_poll - NAPI poll handler.
 * @napi:       Pointer to napi_struct structure.
 * @budget:     How many frames to process on one call.
 *
 * returns:     Number of processed frames
 */
static int nps_enet_poll(struct napi_struct *napi, int budget)
{
	struct net_device *ndev = napi->dev;
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 work_done;

	nps_enet_tx_handler(ndev);
	work_done = nps_enet_rx_handler(ndev);
	if (work_done < budget) {
		u32 buf_int_enable_value = 0;
		u32 tx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL);
		u32 tx_ctrl_ct =
			(tx_ctrl_value & TX_CTL_CT_MASK) >> TX_CTL_CT_SHIFT;

		napi_complete(napi);

		/* set tx_done and rx_rdy bits */
		buf_int_enable_value |= NPS_ENET_ENABLE << RX_RDY_SHIFT;
		buf_int_enable_value |= NPS_ENET_ENABLE << TX_DONE_SHIFT;

		nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE,
				 buf_int_enable_value);

		/* in case we will get a tx interrupt while interrupts
		 * are masked, we will lose it since the tx is edge interrupt.
		 * specifically, while executing the code section above,
		 * between nps_enet_tx_handler and the interrupts enable, all
		 * tx requests will be stuck until we will get an rx interrupt.
		 * the two code lines below will solve this situation by
		 * re-adding ourselves to the poll list.
		 */

		if (priv->tx_skb && !tx_ctrl_ct) {
			nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0);
			napi_reschedule(napi);
		}
	}

	return work_done;
}

/**
 * nps_enet_irq_handler - Global interrupt handler for ENET.
 * @irq:                irq number.
 * @dev_instance:       device instance.
 *
 * returns: IRQ_HANDLED for all cases.
 *
 * EZchip ENET has 2 interrupt causes, and depending on bits raised in
 * CTRL registers we may tell what is a reason for interrupt to fire up.
 * We got one for RX and the other for TX (completion).
 */
static irqreturn_t nps_enet_irq_handler(s32 irq, void *dev_instance)
{
	struct net_device *ndev = dev_instance;
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 rx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL);
	u32 tx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL);
	u32 tx_ctrl_ct = (tx_ctrl_value & TX_CTL_CT_MASK) >> TX_CTL_CT_SHIFT;
	u32 rx_ctrl_cr = (rx_ctrl_value & RX_CTL_CR_MASK) >> RX_CTL_CR_SHIFT;

	if ((!tx_ctrl_ct && priv->tx_skb) || rx_ctrl_cr)
		if (likely(napi_schedule_prep(&priv->napi))) {
			nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0);
			__napi_schedule(&priv->napi);
		}

	return IRQ_HANDLED;
}

static void nps_enet_set_hw_mac_address(struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 ge_mac_cfg_1_value = 0;
	u32 *ge_mac_cfg_2_value = &priv->ge_mac_cfg_2_value;

	/* set MAC address in HW */
	ge_mac_cfg_1_value |= ndev->dev_addr[0] << CFG_1_OCTET_0_SHIFT;
	ge_mac_cfg_1_value |= ndev->dev_addr[1] << CFG_1_OCTET_1_SHIFT;
	ge_mac_cfg_1_value |= ndev->dev_addr[2] << CFG_1_OCTET_2_SHIFT;
	ge_mac_cfg_1_value |= ndev->dev_addr[3] << CFG_1_OCTET_3_SHIFT;
	*ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_OCTET_4_MASK)
		 | ndev->dev_addr[4] << CFG_2_OCTET_4_SHIFT;
	*ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_OCTET_5_MASK)
		 | ndev->dev_addr[5] << CFG_2_OCTET_5_SHIFT;

	nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_1,
			 ge_mac_cfg_1_value);

	nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2,
			 *ge_mac_cfg_2_value);
}

/**
 * nps_enet_hw_reset - Reset the network device.
 * @ndev:       Pointer to the network device.
 *
 * This function reset the PCS and TX fifo.
 * The programming model is to set the relevant reset bits
 * wait for some time for this to propagate and then unset
 * the reset bits. This way we ensure that reset procedure
 * is done successfully by device.
 */
static void nps_enet_hw_reset(struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 ge_rst_value = 0, phase_fifo_ctl_value = 0;

	/* Pcs reset sequence*/
	ge_rst_value |= NPS_ENET_ENABLE << RST_GMAC_0_SHIFT;
	nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst_value);
	usleep_range(10, 20);
	nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst_value);

	/* Tx fifo reset sequence */
	phase_fifo_ctl_value |= NPS_ENET_ENABLE << PHASE_FIFO_CTL_RST_SHIFT;
	phase_fifo_ctl_value |= NPS_ENET_ENABLE << PHASE_FIFO_CTL_INIT_SHIFT;
	nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL,
			 phase_fifo_ctl_value);
	usleep_range(10, 20);
	phase_fifo_ctl_value = 0;
	nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL,
			 phase_fifo_ctl_value);
}

static void nps_enet_hw_enable_control(struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 ge_mac_cfg_0_value = 0, buf_int_enable_value = 0;
	u32 *ge_mac_cfg_2_value = &priv->ge_mac_cfg_2_value;
	u32 *ge_mac_cfg_3_value = &priv->ge_mac_cfg_3_value;
	s32 max_frame_length;

	/* Enable Rx and Tx statistics */
	*ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_STAT_EN_MASK)
		 | NPS_ENET_GE_MAC_CFG_2_STAT_EN << CFG_2_STAT_EN_SHIFT;

	/* Discard packets with different MAC address */
	*ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK)
		 | NPS_ENET_ENABLE << CFG_2_DISK_DA_SHIFT;

	/* Discard multicast packets */
	*ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK)
		 | NPS_ENET_ENABLE << CFG_2_DISK_MC_SHIFT;

	nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2,
			 *ge_mac_cfg_2_value);

	/* Discard Packets bigger than max frame length */
	max_frame_length = ETH_HLEN + ndev->mtu + ETH_FCS_LEN;
	if (max_frame_length <= NPS_ENET_MAX_FRAME_LENGTH) {
		*ge_mac_cfg_3_value =
			 (*ge_mac_cfg_3_value & ~CFG_3_MAX_LEN_MASK)
			 | max_frame_length << CFG_3_MAX_LEN_SHIFT;
	}

	/* Enable interrupts */
	buf_int_enable_value |= NPS_ENET_ENABLE << RX_RDY_SHIFT;
	buf_int_enable_value |= NPS_ENET_ENABLE << TX_DONE_SHIFT;
	nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE,
			 buf_int_enable_value);

	/* Write device MAC address to HW */
	nps_enet_set_hw_mac_address(ndev);

	/* Rx and Tx HW features */
	ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_PAD_EN_SHIFT;
	ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_CRC_EN_SHIFT;
	ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_CRC_STRIP_SHIFT;

	/* IFG configuration */
	ge_mac_cfg_0_value |=
		 NPS_ENET_GE_MAC_CFG_0_RX_IFG << CFG_0_RX_IFG_SHIFT;
	ge_mac_cfg_0_value |=
		 NPS_ENET_GE_MAC_CFG_0_TX_IFG << CFG_0_TX_IFG_SHIFT;

	/* preamble configuration */
	ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_PR_CHECK_EN_SHIFT;
	ge_mac_cfg_0_value |=
		 NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN << CFG_0_TX_PR_LEN_SHIFT;

	/* enable flow control frames */
	ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_FC_EN_SHIFT;
	ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_FC_EN_SHIFT;
	ge_mac_cfg_0_value |=
		 NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR << CFG_0_TX_FC_RETR_SHIFT;
	*ge_mac_cfg_3_value = (*ge_mac_cfg_3_value & ~CFG_3_CF_DROP_MASK)
		 | NPS_ENET_ENABLE << CFG_3_CF_DROP_SHIFT;

	/* Enable Rx and Tx */
	ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_EN_SHIFT;
	ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_EN_SHIFT;

	nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_3,
			 *ge_mac_cfg_3_value);
	nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0,
			 ge_mac_cfg_0_value);
}

static void nps_enet_hw_disable_control(struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);

	/* Disable interrupts */
	nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0);

	/* Disable Rx and Tx */
	nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, 0);
}

static void nps_enet_send_frame(struct net_device *ndev,
				struct sk_buff *skb)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 tx_ctrl_value = 0;
	short length = skb->len;
	u32 i, len = DIV_ROUND_UP(length, sizeof(u32));
	u32 *src = (void *)skb->data;
	bool src_is_aligned = IS_ALIGNED((unsigned long)src, sizeof(u32));

	/* In case src is not aligned we need an intermediate buffer */
	if (src_is_aligned)
		iowrite32_rep(priv->regs_base + NPS_ENET_REG_TX_BUF, src, len);
	else /* !src_is_aligned */
		for (i = 0; i < len; i++, src++)
			nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF,
					 get_unaligned_be32(src));

	/* Write the length of the Frame */
	tx_ctrl_value |= length << TX_CTL_NT_SHIFT;

	tx_ctrl_value |= NPS_ENET_ENABLE << TX_CTL_CT_SHIFT;
	/* Send Frame */
	nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, tx_ctrl_value);
}

/**
 * nps_enet_set_mac_address - Set the MAC address for this device.
 * @ndev:       Pointer to net_device structure.
 * @p:          6 byte Address to be written as MAC address.
 *
 * This function copies the HW address from the sockaddr structure to the
 * net_device structure and updates the address in HW.
 *
 * returns:     -EBUSY if the net device is busy or 0 if the address is set
 *              successfully.
 */
static s32 nps_enet_set_mac_address(struct net_device *ndev, void *p)
{
	struct sockaddr *addr = p;
	s32 res;

	if (netif_running(ndev))
		return -EBUSY;

	res = eth_mac_addr(ndev, p);
	if (!res) {
		ether_addr_copy(ndev->dev_addr, addr->sa_data);
		nps_enet_set_hw_mac_address(ndev);
	}

	return res;
}

/**
 * nps_enet_set_rx_mode - Change the receive filtering mode.
 * @ndev:       Pointer to the network device.
 *
 * This function enables/disables promiscuous mode
 */
static void nps_enet_set_rx_mode(struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	u32 ge_mac_cfg_2_value = priv->ge_mac_cfg_2_value;

	if (ndev->flags & IFF_PROMISC) {
		ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK)
			 | NPS_ENET_DISABLE << CFG_2_DISK_DA_SHIFT;
		ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK)
			 | NPS_ENET_DISABLE << CFG_2_DISK_MC_SHIFT;

	} else {
		ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK)
			 | NPS_ENET_ENABLE << CFG_2_DISK_DA_SHIFT;
		ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK)
			 | NPS_ENET_ENABLE << CFG_2_DISK_MC_SHIFT;

	}

	nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, ge_mac_cfg_2_value);
}

/**
 * nps_enet_open - Open the network device.
 * @ndev:       Pointer to the network device.
 *
 * returns: 0, on success or non-zero error value on failure.
 *
 * This function sets the MAC address, requests and enables an IRQ
 * for the ENET device and starts the Tx queue.
 */
static s32 nps_enet_open(struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);
	s32 err;

	/* Reset private variables */
	priv->tx_skb = NULL;
	priv->ge_mac_cfg_2_value = 0;
	priv->ge_mac_cfg_3_value = 0;

	/* ge_mac_cfg_3 default values */
	priv->ge_mac_cfg_3_value |=
		 NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH << CFG_3_RX_IFG_TH_SHIFT;

	priv->ge_mac_cfg_3_value |=
		 NPS_ENET_GE_MAC_CFG_3_MAX_LEN << CFG_3_MAX_LEN_SHIFT;

	/* Disable HW device */
	nps_enet_hw_disable_control(ndev);

	/* irq Rx allocation */
	err = request_irq(priv->irq, nps_enet_irq_handler,
			  0, "enet-rx-tx", ndev);
	if (err)
		return err;

	napi_enable(&priv->napi);

	/* Enable HW device */
	nps_enet_hw_reset(ndev);
	nps_enet_hw_enable_control(ndev);

	netif_start_queue(ndev);

	return 0;
}

/**
 * nps_enet_stop - Close the network device.
 * @ndev:       Pointer to the network device.
 *
 * This function stops the Tx queue, disables interrupts for the ENET device.
 */
static s32 nps_enet_stop(struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);

	napi_disable(&priv->napi);
	netif_stop_queue(ndev);
	nps_enet_hw_disable_control(ndev);
	free_irq(priv->irq, ndev);

	return 0;
}

/**
 * nps_enet_start_xmit - Starts the data transmission.
 * @skb:        sk_buff pointer that contains data to be Transmitted.
 * @ndev:       Pointer to net_device structure.
 *
 * returns: NETDEV_TX_OK, on success
 *              NETDEV_TX_BUSY, if any of the descriptors are not free.
 *
 * This function is invoked from upper layers to initiate transmission.
 */
static netdev_tx_t nps_enet_start_xmit(struct sk_buff *skb,
				       struct net_device *ndev)
{
	struct nps_enet_priv *priv = netdev_priv(ndev);

	/* This driver handles one frame at a time  */
	netif_stop_queue(ndev);

	priv->tx_skb = skb;

	/* make sure tx_skb is actually written to the memory
	 * before the HW is informed and the IRQ is fired.
	 */
	wmb();

	nps_enet_send_frame(ndev, skb);

	return NETDEV_TX_OK;
}

#ifdef CONFIG_NET_POLL_CONTROLLER
static void nps_enet_poll_controller(struct net_device *ndev)
{
	disable_irq(ndev->irq);
	nps_enet_irq_handler(ndev->irq, ndev);
	enable_irq(ndev->irq);
}
#endif

static const struct net_device_ops nps_netdev_ops = {
	.ndo_open		= nps_enet_open,
	.ndo_stop		= nps_enet_stop,
	.ndo_start_xmit		= nps_enet_start_xmit,
	.ndo_set_mac_address	= nps_enet_set_mac_address,
	.ndo_set_rx_mode        = nps_enet_set_rx_mode,
#ifdef CONFIG_NET_POLL_CONTROLLER
	.ndo_poll_controller	= nps_enet_poll_controller,
#endif
};

static s32 nps_enet_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct net_device *ndev;
	struct nps_enet_priv *priv;
	s32 err = 0;
	const char *mac_addr;
	struct resource *res_regs;

	if (!dev->of_node)
		return -ENODEV;

	ndev = alloc_etherdev(sizeof(struct nps_enet_priv));
	if (!ndev)
		return -ENOMEM;

	platform_set_drvdata(pdev, ndev);
	SET_NETDEV_DEV(ndev, dev);
	priv = netdev_priv(ndev);

	/* The EZ NET specific entries in the device structure. */
	ndev->netdev_ops = &nps_netdev_ops;
	ndev->watchdog_timeo = (400 * HZ / 1000);
	/* FIXME :: no multicast support yet */
	ndev->flags &= ~IFF_MULTICAST;

	res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	priv->regs_base = devm_ioremap_resource(dev, res_regs);
	if (IS_ERR(priv->regs_base)) {
		err = PTR_ERR(priv->regs_base);
		goto out_netdev;
	}
	dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base);

	/* set kernel MAC address to dev */
	mac_addr = of_get_mac_address(dev->of_node);
	if (mac_addr)
		ether_addr_copy(ndev->dev_addr, mac_addr);
	else
		eth_hw_addr_random(ndev);

	/* Get IRQ number */
	priv->irq = platform_get_irq(pdev, 0);
	if (!priv->irq) {
		dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
		err = -ENODEV;
		goto out_netdev;
	}

	netif_napi_add(ndev, &priv->napi, nps_enet_poll,
		       NPS_ENET_NAPI_POLL_WEIGHT);

	/* Register the driver. Should be the last thing in probe */
	err = register_netdev(ndev);
	if (err) {
		dev_err(dev, "Failed to register ndev for %s, err = 0x%08x\n",
			ndev->name, (s32)err);
		goto out_netif_api;
	}

	dev_info(dev, "(rx/tx=%d)\n", priv->irq);
	return 0;

out_netif_api:
	netif_napi_del(&priv->napi);
out_netdev:
	if (err)
		free_netdev(ndev);

	return err;
}

static s32 nps_enet_remove(struct platform_device *pdev)
{
	struct net_device *ndev = platform_get_drvdata(pdev);
	struct nps_enet_priv *priv = netdev_priv(ndev);

	unregister_netdev(ndev);
	free_netdev(ndev);
	netif_napi_del(&priv->napi);

	return 0;
}

static const struct of_device_id nps_enet_dt_ids[] = {
	{ .compatible = "ezchip,nps-mgt-enet" },
	{ /* Sentinel */ }
};

static struct platform_driver nps_enet_driver = {
	.probe = nps_enet_probe,
	.remove = nps_enet_remove,
	.driver = {
		.name = DRV_NAME,
		.of_match_table  = nps_enet_dt_ids,
	},
};

module_platform_driver(nps_enet_driver);

MODULE_AUTHOR("EZchip Semiconductor");
MODULE_LICENSE("GPL v2");