Commit | Line | Data |
---|---|---|
bc7f75fa AK |
1 | /******************************************************************************* |
2 | ||
3 | Intel PRO/1000 Linux driver | |
c7e54b1b | 4 | Copyright(c) 1999 - 2009 Intel Corporation. |
bc7f75fa AK |
5 | |
6 | This program is free software; you can redistribute it and/or modify it | |
7 | under the terms and conditions of the GNU General Public License, | |
8 | version 2, as published by the Free Software Foundation. | |
9 | ||
10 | This program is distributed in the hope it will be useful, but WITHOUT | |
11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
13 | more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License along with | |
16 | this program; if not, write to the Free Software Foundation, Inc., | |
17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
18 | ||
19 | The full GNU General Public License is included in this distribution in | |
20 | the file called "COPYING". | |
21 | ||
22 | Contact Information: | |
23 | Linux NICS <linux.nics@intel.com> | |
24 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
25 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
26 | ||
27 | *******************************************************************************/ | |
28 | ||
bc7f75fa AK |
29 | #include "e1000.h" |
30 | ||
31 | enum e1000_mng_mode { | |
32 | e1000_mng_mode_none = 0, | |
33 | e1000_mng_mode_asf, | |
34 | e1000_mng_mode_pt, | |
35 | e1000_mng_mode_ipmi, | |
36 | e1000_mng_mode_host_if_only | |
37 | }; | |
38 | ||
39 | #define E1000_FACTPS_MNGCG 0x20000000 | |
40 | ||
ad68076e BA |
41 | /* Intel(R) Active Management Technology signature */ |
42 | #define E1000_IAMT_SIGNATURE 0x544D4149 | |
bc7f75fa AK |
43 | |
44 | /** | |
45 | * e1000e_get_bus_info_pcie - Get PCIe bus information | |
46 | * @hw: pointer to the HW structure | |
47 | * | |
48 | * Determines and stores the system bus information for a particular | |
49 | * network interface. The following bus information is determined and stored: | |
50 | * bus speed, bus width, type (PCIe), and PCIe function. | |
51 | **/ | |
52 | s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw) | |
53 | { | |
f4d2dd4c | 54 | struct e1000_mac_info *mac = &hw->mac; |
bc7f75fa AK |
55 | struct e1000_bus_info *bus = &hw->bus; |
56 | struct e1000_adapter *adapter = hw->adapter; | |
f4d2dd4c | 57 | u16 pcie_link_status, cap_offset; |
bc7f75fa AK |
58 | |
59 | cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); | |
60 | if (!cap_offset) { | |
61 | bus->width = e1000_bus_width_unknown; | |
62 | } else { | |
63 | pci_read_config_word(adapter->pdev, | |
64 | cap_offset + PCIE_LINK_STATUS, | |
65 | &pcie_link_status); | |
66 | bus->width = (enum e1000_bus_width)((pcie_link_status & | |
67 | PCIE_LINK_WIDTH_MASK) >> | |
68 | PCIE_LINK_WIDTH_SHIFT); | |
69 | } | |
70 | ||
f4d2dd4c | 71 | mac->ops.set_lan_id(hw); |
bc7f75fa AK |
72 | |
73 | return 0; | |
74 | } | |
75 | ||
f4d2dd4c BA |
76 | /** |
77 | * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices | |
78 | * | |
79 | * @hw: pointer to the HW structure | |
80 | * | |
81 | * Determines the LAN function id by reading memory-mapped registers | |
82 | * and swaps the port value if requested. | |
83 | **/ | |
84 | void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw) | |
85 | { | |
86 | struct e1000_bus_info *bus = &hw->bus; | |
87 | u32 reg; | |
88 | ||
89 | /* | |
90 | * The status register reports the correct function number | |
91 | * for the device regardless of function swap state. | |
92 | */ | |
93 | reg = er32(STATUS); | |
94 | bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT; | |
95 | } | |
96 | ||
97 | /** | |
98 | * e1000_set_lan_id_single_port - Set LAN id for a single port device | |
99 | * @hw: pointer to the HW structure | |
100 | * | |
101 | * Sets the LAN function id to zero for a single port device. | |
102 | **/ | |
103 | void e1000_set_lan_id_single_port(struct e1000_hw *hw) | |
104 | { | |
105 | struct e1000_bus_info *bus = &hw->bus; | |
106 | ||
107 | bus->func = 0; | |
108 | } | |
109 | ||
bc7f75fa | 110 | /** |
caaddaf8 BA |
111 | * e1000_clear_vfta_generic - Clear VLAN filter table |
112 | * @hw: pointer to the HW structure | |
113 | * | |
114 | * Clears the register array which contains the VLAN filter table by | |
115 | * setting all the values to 0. | |
116 | **/ | |
117 | void e1000_clear_vfta_generic(struct e1000_hw *hw) | |
118 | { | |
119 | u32 offset; | |
120 | ||
121 | for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { | |
122 | E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); | |
123 | e1e_flush(); | |
124 | } | |
125 | } | |
126 | ||
127 | /** | |
128 | * e1000_write_vfta_generic - Write value to VLAN filter table | |
bc7f75fa AK |
129 | * @hw: pointer to the HW structure |
130 | * @offset: register offset in VLAN filter table | |
131 | * @value: register value written to VLAN filter table | |
132 | * | |
133 | * Writes value at the given offset in the register array which stores | |
134 | * the VLAN filter table. | |
135 | **/ | |
caaddaf8 | 136 | void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) |
bc7f75fa AK |
137 | { |
138 | E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); | |
139 | e1e_flush(); | |
140 | } | |
141 | ||
142 | /** | |
143 | * e1000e_init_rx_addrs - Initialize receive address's | |
144 | * @hw: pointer to the HW structure | |
145 | * @rar_count: receive address registers | |
146 | * | |
147 | * Setups the receive address registers by setting the base receive address | |
148 | * register to the devices MAC address and clearing all the other receive | |
149 | * address registers to 0. | |
150 | **/ | |
151 | void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) | |
152 | { | |
153 | u32 i; | |
b7a9216c | 154 | u8 mac_addr[ETH_ALEN] = {0}; |
bc7f75fa AK |
155 | |
156 | /* Setup the receive address */ | |
3bb99fe2 | 157 | e_dbg("Programming MAC Address into RAR[0]\n"); |
bc7f75fa AK |
158 | |
159 | e1000e_rar_set(hw, hw->mac.addr, 0); | |
160 | ||
161 | /* Zero out the other (rar_entry_count - 1) receive addresses */ | |
3bb99fe2 | 162 | e_dbg("Clearing RAR[1-%u]\n", rar_count-1); |
b7a9216c BA |
163 | for (i = 1; i < rar_count; i++) |
164 | e1000e_rar_set(hw, mac_addr, i); | |
bc7f75fa AK |
165 | } |
166 | ||
608f8a0d BA |
167 | /** |
168 | * e1000_check_alt_mac_addr_generic - Check for alternate MAC addr | |
169 | * @hw: pointer to the HW structure | |
170 | * | |
171 | * Checks the nvm for an alternate MAC address. An alternate MAC address | |
172 | * can be setup by pre-boot software and must be treated like a permanent | |
173 | * address and must override the actual permanent MAC address. If an | |
174 | * alternate MAC address is found it is programmed into RAR0, replacing | |
175 | * the permanent address that was installed into RAR0 by the Si on reset. | |
176 | * This function will return SUCCESS unless it encounters an error while | |
177 | * reading the EEPROM. | |
178 | **/ | |
179 | s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) | |
180 | { | |
181 | u32 i; | |
182 | s32 ret_val = 0; | |
183 | u16 offset, nvm_alt_mac_addr_offset, nvm_data; | |
184 | u8 alt_mac_addr[ETH_ALEN]; | |
185 | ||
186 | ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, | |
187 | &nvm_alt_mac_addr_offset); | |
188 | if (ret_val) { | |
189 | e_dbg("NVM Read Error\n"); | |
190 | goto out; | |
191 | } | |
192 | ||
193 | if (nvm_alt_mac_addr_offset == 0xFFFF) { | |
194 | /* There is no Alternate MAC Address */ | |
195 | goto out; | |
196 | } | |
197 | ||
198 | if (hw->bus.func == E1000_FUNC_1) | |
199 | nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; | |
200 | for (i = 0; i < ETH_ALEN; i += 2) { | |
201 | offset = nvm_alt_mac_addr_offset + (i >> 1); | |
202 | ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data); | |
203 | if (ret_val) { | |
204 | e_dbg("NVM Read Error\n"); | |
205 | goto out; | |
206 | } | |
207 | ||
208 | alt_mac_addr[i] = (u8)(nvm_data & 0xFF); | |
209 | alt_mac_addr[i + 1] = (u8)(nvm_data >> 8); | |
210 | } | |
211 | ||
212 | /* if multicast bit is set, the alternate address will not be used */ | |
213 | if (alt_mac_addr[0] & 0x01) { | |
214 | e_dbg("Ignoring Alternate Mac Address with MC bit set\n"); | |
215 | goto out; | |
216 | } | |
217 | ||
218 | /* | |
219 | * We have a valid alternate MAC address, and we want to treat it the | |
220 | * same as the normal permanent MAC address stored by the HW into the | |
221 | * RAR. Do this by mapping this address into RAR0. | |
222 | */ | |
223 | e1000e_rar_set(hw, alt_mac_addr, 0); | |
224 | ||
225 | out: | |
226 | return ret_val; | |
227 | } | |
228 | ||
bc7f75fa AK |
229 | /** |
230 | * e1000e_rar_set - Set receive address register | |
231 | * @hw: pointer to the HW structure | |
232 | * @addr: pointer to the receive address | |
233 | * @index: receive address array register | |
234 | * | |
235 | * Sets the receive address array register at index to the address passed | |
236 | * in by addr. | |
237 | **/ | |
238 | void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) | |
239 | { | |
240 | u32 rar_low, rar_high; | |
241 | ||
ad68076e BA |
242 | /* |
243 | * HW expects these in little endian so we reverse the byte order | |
bc7f75fa AK |
244 | * from network order (big endian) to little endian |
245 | */ | |
246 | rar_low = ((u32) addr[0] | | |
247 | ((u32) addr[1] << 8) | | |
248 | ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); | |
249 | ||
250 | rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); | |
251 | ||
b7a9216c BA |
252 | /* If MAC address zero, no need to set the AV bit */ |
253 | if (rar_low || rar_high) | |
254 | rar_high |= E1000_RAH_AV; | |
bc7f75fa | 255 | |
b7a9216c BA |
256 | /* |
257 | * Some bridges will combine consecutive 32-bit writes into | |
258 | * a single burst write, which will malfunction on some parts. | |
259 | * The flushes avoid this. | |
260 | */ | |
261 | ew32(RAL(index), rar_low); | |
262 | e1e_flush(); | |
263 | ew32(RAH(index), rar_high); | |
264 | e1e_flush(); | |
bc7f75fa AK |
265 | } |
266 | ||
bc7f75fa AK |
267 | /** |
268 | * e1000_hash_mc_addr - Generate a multicast hash value | |
269 | * @hw: pointer to the HW structure | |
270 | * @mc_addr: pointer to a multicast address | |
271 | * | |
272 | * Generates a multicast address hash value which is used to determine | |
273 | * the multicast filter table array address and new table value. See | |
274 | * e1000_mta_set_generic() | |
275 | **/ | |
276 | static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) | |
277 | { | |
278 | u32 hash_value, hash_mask; | |
279 | u8 bit_shift = 0; | |
280 | ||
281 | /* Register count multiplied by bits per register */ | |
282 | hash_mask = (hw->mac.mta_reg_count * 32) - 1; | |
283 | ||
ad68076e BA |
284 | /* |
285 | * For a mc_filter_type of 0, bit_shift is the number of left-shifts | |
286 | * where 0xFF would still fall within the hash mask. | |
287 | */ | |
bc7f75fa AK |
288 | while (hash_mask >> bit_shift != 0xFF) |
289 | bit_shift++; | |
290 | ||
ad68076e BA |
291 | /* |
292 | * The portion of the address that is used for the hash table | |
bc7f75fa AK |
293 | * is determined by the mc_filter_type setting. |
294 | * The algorithm is such that there is a total of 8 bits of shifting. | |
295 | * The bit_shift for a mc_filter_type of 0 represents the number of | |
296 | * left-shifts where the MSB of mc_addr[5] would still fall within | |
297 | * the hash_mask. Case 0 does this exactly. Since there are a total | |
298 | * of 8 bits of shifting, then mc_addr[4] will shift right the | |
299 | * remaining number of bits. Thus 8 - bit_shift. The rest of the | |
300 | * cases are a variation of this algorithm...essentially raising the | |
301 | * number of bits to shift mc_addr[5] left, while still keeping the | |
302 | * 8-bit shifting total. | |
ad68076e BA |
303 | * |
304 | * For example, given the following Destination MAC Address and an | |
bc7f75fa AK |
305 | * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), |
306 | * we can see that the bit_shift for case 0 is 4. These are the hash | |
307 | * values resulting from each mc_filter_type... | |
308 | * [0] [1] [2] [3] [4] [5] | |
309 | * 01 AA 00 12 34 56 | |
310 | * LSB MSB | |
311 | * | |
312 | * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 | |
313 | * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 | |
314 | * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 | |
315 | * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 | |
316 | */ | |
317 | switch (hw->mac.mc_filter_type) { | |
318 | default: | |
319 | case 0: | |
320 | break; | |
321 | case 1: | |
322 | bit_shift += 1; | |
323 | break; | |
324 | case 2: | |
325 | bit_shift += 2; | |
326 | break; | |
327 | case 3: | |
328 | bit_shift += 4; | |
329 | break; | |
330 | } | |
331 | ||
332 | hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | | |
333 | (((u16) mc_addr[5]) << bit_shift))); | |
334 | ||
335 | return hash_value; | |
336 | } | |
337 | ||
338 | /** | |
e2de3eb6 | 339 | * e1000e_update_mc_addr_list_generic - Update Multicast addresses |
bc7f75fa AK |
340 | * @hw: pointer to the HW structure |
341 | * @mc_addr_list: array of multicast addresses to program | |
342 | * @mc_addr_count: number of multicast addresses to program | |
bc7f75fa | 343 | * |
ab8932f3 | 344 | * Updates entire Multicast Table Array. |
bc7f75fa | 345 | * The caller must have a packed mc_addr_list of multicast addresses. |
bc7f75fa | 346 | **/ |
e2de3eb6 | 347 | void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, |
ab8932f3 | 348 | u8 *mc_addr_list, u32 mc_addr_count) |
bc7f75fa | 349 | { |
ab8932f3 BA |
350 | u32 hash_value, hash_bit, hash_reg; |
351 | int i; | |
bc7f75fa | 352 | |
ab8932f3 BA |
353 | /* clear mta_shadow */ |
354 | memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); | |
bc7f75fa | 355 | |
ab8932f3 BA |
356 | /* update mta_shadow from mc_addr_list */ |
357 | for (i = 0; (u32) i < mc_addr_count; i++) { | |
bc7f75fa | 358 | hash_value = e1000_hash_mc_addr(hw, mc_addr_list); |
ab8932f3 | 359 | |
a72d2b2c JB |
360 | hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); |
361 | hash_bit = hash_value & 0x1F; | |
a72d2b2c | 362 | |
ab8932f3 BA |
363 | hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); |
364 | mc_addr_list += (ETH_ALEN); | |
365 | } | |
a72d2b2c | 366 | |
ab8932f3 BA |
367 | /* replace the entire MTA table */ |
368 | for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) | |
369 | E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]); | |
a72d2b2c | 370 | e1e_flush(); |
bc7f75fa AK |
371 | } |
372 | ||
373 | /** | |
374 | * e1000e_clear_hw_cntrs_base - Clear base hardware counters | |
375 | * @hw: pointer to the HW structure | |
376 | * | |
377 | * Clears the base hardware counters by reading the counter registers. | |
378 | **/ | |
379 | void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw) | |
380 | { | |
99673d9b BA |
381 | er32(CRCERRS); |
382 | er32(SYMERRS); | |
383 | er32(MPC); | |
384 | er32(SCC); | |
385 | er32(ECOL); | |
386 | er32(MCC); | |
387 | er32(LATECOL); | |
388 | er32(COLC); | |
389 | er32(DC); | |
390 | er32(SEC); | |
391 | er32(RLEC); | |
392 | er32(XONRXC); | |
393 | er32(XONTXC); | |
394 | er32(XOFFRXC); | |
395 | er32(XOFFTXC); | |
396 | er32(FCRUC); | |
397 | er32(GPRC); | |
398 | er32(BPRC); | |
399 | er32(MPRC); | |
400 | er32(GPTC); | |
401 | er32(GORCL); | |
402 | er32(GORCH); | |
403 | er32(GOTCL); | |
404 | er32(GOTCH); | |
405 | er32(RNBC); | |
406 | er32(RUC); | |
407 | er32(RFC); | |
408 | er32(ROC); | |
409 | er32(RJC); | |
410 | er32(TORL); | |
411 | er32(TORH); | |
412 | er32(TOTL); | |
413 | er32(TOTH); | |
414 | er32(TPR); | |
415 | er32(TPT); | |
416 | er32(MPTC); | |
417 | er32(BPTC); | |
bc7f75fa AK |
418 | } |
419 | ||
420 | /** | |
421 | * e1000e_check_for_copper_link - Check for link (Copper) | |
422 | * @hw: pointer to the HW structure | |
423 | * | |
424 | * Checks to see of the link status of the hardware has changed. If a | |
425 | * change in link status has been detected, then we read the PHY registers | |
426 | * to get the current speed/duplex if link exists. | |
427 | **/ | |
428 | s32 e1000e_check_for_copper_link(struct e1000_hw *hw) | |
429 | { | |
430 | struct e1000_mac_info *mac = &hw->mac; | |
431 | s32 ret_val; | |
432 | bool link; | |
433 | ||
ad68076e BA |
434 | /* |
435 | * We only want to go out to the PHY registers to see if Auto-Neg | |
bc7f75fa AK |
436 | * has completed and/or if our link status has changed. The |
437 | * get_link_status flag is set upon receiving a Link Status | |
438 | * Change or Rx Sequence Error interrupt. | |
439 | */ | |
440 | if (!mac->get_link_status) | |
441 | return 0; | |
442 | ||
ad68076e BA |
443 | /* |
444 | * First we want to see if the MII Status Register reports | |
bc7f75fa AK |
445 | * link. If so, then we want to get the current speed/duplex |
446 | * of the PHY. | |
447 | */ | |
448 | ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); | |
449 | if (ret_val) | |
450 | return ret_val; | |
451 | ||
452 | if (!link) | |
453 | return ret_val; /* No link detected */ | |
454 | ||
564ea9bb | 455 | mac->get_link_status = false; |
bc7f75fa | 456 | |
ad68076e BA |
457 | /* |
458 | * Check if there was DownShift, must be checked | |
459 | * immediately after link-up | |
460 | */ | |
bc7f75fa AK |
461 | e1000e_check_downshift(hw); |
462 | ||
ad68076e BA |
463 | /* |
464 | * If we are forcing speed/duplex, then we simply return since | |
bc7f75fa AK |
465 | * we have already determined whether we have link or not. |
466 | */ | |
467 | if (!mac->autoneg) { | |
468 | ret_val = -E1000_ERR_CONFIG; | |
469 | return ret_val; | |
470 | } | |
471 | ||
ad68076e BA |
472 | /* |
473 | * Auto-Neg is enabled. Auto Speed Detection takes care | |
bc7f75fa AK |
474 | * of MAC speed/duplex configuration. So we only need to |
475 | * configure Collision Distance in the MAC. | |
476 | */ | |
477 | e1000e_config_collision_dist(hw); | |
478 | ||
ad68076e BA |
479 | /* |
480 | * Configure Flow Control now that Auto-Neg has completed. | |
bc7f75fa AK |
481 | * First, we need to restore the desired flow control |
482 | * settings because we may have had to re-autoneg with a | |
483 | * different link partner. | |
484 | */ | |
485 | ret_val = e1000e_config_fc_after_link_up(hw); | |
486 | if (ret_val) { | |
3bb99fe2 | 487 | e_dbg("Error configuring flow control\n"); |
bc7f75fa AK |
488 | } |
489 | ||
490 | return ret_val; | |
491 | } | |
492 | ||
493 | /** | |
494 | * e1000e_check_for_fiber_link - Check for link (Fiber) | |
495 | * @hw: pointer to the HW structure | |
496 | * | |
497 | * Checks for link up on the hardware. If link is not up and we have | |
498 | * a signal, then we need to force link up. | |
499 | **/ | |
500 | s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) | |
501 | { | |
502 | struct e1000_mac_info *mac = &hw->mac; | |
503 | u32 rxcw; | |
504 | u32 ctrl; | |
505 | u32 status; | |
506 | s32 ret_val; | |
507 | ||
508 | ctrl = er32(CTRL); | |
509 | status = er32(STATUS); | |
510 | rxcw = er32(RXCW); | |
511 | ||
ad68076e BA |
512 | /* |
513 | * If we don't have link (auto-negotiation failed or link partner | |
bc7f75fa AK |
514 | * cannot auto-negotiate), the cable is plugged in (we have signal), |
515 | * and our link partner is not trying to auto-negotiate with us (we | |
516 | * are receiving idles or data), we need to force link up. We also | |
517 | * need to give auto-negotiation time to complete, in case the cable | |
518 | * was just plugged in. The autoneg_failed flag does this. | |
519 | */ | |
520 | /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ | |
521 | if ((ctrl & E1000_CTRL_SWDPIN1) && (!(status & E1000_STATUS_LU)) && | |
522 | (!(rxcw & E1000_RXCW_C))) { | |
523 | if (mac->autoneg_failed == 0) { | |
524 | mac->autoneg_failed = 1; | |
525 | return 0; | |
526 | } | |
3bb99fe2 | 527 | e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); |
bc7f75fa AK |
528 | |
529 | /* Disable auto-negotiation in the TXCW register */ | |
530 | ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); | |
531 | ||
532 | /* Force link-up and also force full-duplex. */ | |
533 | ctrl = er32(CTRL); | |
534 | ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); | |
535 | ew32(CTRL, ctrl); | |
536 | ||
537 | /* Configure Flow Control after forcing link up. */ | |
538 | ret_val = e1000e_config_fc_after_link_up(hw); | |
539 | if (ret_val) { | |
3bb99fe2 | 540 | e_dbg("Error configuring flow control\n"); |
bc7f75fa AK |
541 | return ret_val; |
542 | } | |
543 | } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { | |
ad68076e BA |
544 | /* |
545 | * If we are forcing link and we are receiving /C/ ordered | |
bc7f75fa AK |
546 | * sets, re-enable auto-negotiation in the TXCW register |
547 | * and disable forced link in the Device Control register | |
548 | * in an attempt to auto-negotiate with our link partner. | |
549 | */ | |
3bb99fe2 | 550 | e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); |
bc7f75fa AK |
551 | ew32(TXCW, mac->txcw); |
552 | ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); | |
553 | ||
612e244c | 554 | mac->serdes_has_link = true; |
bc7f75fa AK |
555 | } |
556 | ||
557 | return 0; | |
558 | } | |
559 | ||
560 | /** | |
561 | * e1000e_check_for_serdes_link - Check for link (Serdes) | |
562 | * @hw: pointer to the HW structure | |
563 | * | |
564 | * Checks for link up on the hardware. If link is not up and we have | |
565 | * a signal, then we need to force link up. | |
566 | **/ | |
567 | s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) | |
568 | { | |
569 | struct e1000_mac_info *mac = &hw->mac; | |
570 | u32 rxcw; | |
571 | u32 ctrl; | |
572 | u32 status; | |
573 | s32 ret_val; | |
574 | ||
575 | ctrl = er32(CTRL); | |
576 | status = er32(STATUS); | |
577 | rxcw = er32(RXCW); | |
578 | ||
ad68076e BA |
579 | /* |
580 | * If we don't have link (auto-negotiation failed or link partner | |
bc7f75fa AK |
581 | * cannot auto-negotiate), and our link partner is not trying to |
582 | * auto-negotiate with us (we are receiving idles or data), | |
583 | * we need to force link up. We also need to give auto-negotiation | |
584 | * time to complete. | |
585 | */ | |
586 | /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ | |
587 | if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) { | |
588 | if (mac->autoneg_failed == 0) { | |
589 | mac->autoneg_failed = 1; | |
590 | return 0; | |
591 | } | |
3bb99fe2 | 592 | e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); |
bc7f75fa AK |
593 | |
594 | /* Disable auto-negotiation in the TXCW register */ | |
595 | ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); | |
596 | ||
597 | /* Force link-up and also force full-duplex. */ | |
598 | ctrl = er32(CTRL); | |
599 | ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); | |
600 | ew32(CTRL, ctrl); | |
601 | ||
602 | /* Configure Flow Control after forcing link up. */ | |
603 | ret_val = e1000e_config_fc_after_link_up(hw); | |
604 | if (ret_val) { | |
3bb99fe2 | 605 | e_dbg("Error configuring flow control\n"); |
bc7f75fa AK |
606 | return ret_val; |
607 | } | |
608 | } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { | |
ad68076e BA |
609 | /* |
610 | * If we are forcing link and we are receiving /C/ ordered | |
bc7f75fa AK |
611 | * sets, re-enable auto-negotiation in the TXCW register |
612 | * and disable forced link in the Device Control register | |
613 | * in an attempt to auto-negotiate with our link partner. | |
614 | */ | |
3bb99fe2 | 615 | e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); |
bc7f75fa AK |
616 | ew32(TXCW, mac->txcw); |
617 | ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); | |
618 | ||
612e244c | 619 | mac->serdes_has_link = true; |
bc7f75fa | 620 | } else if (!(E1000_TXCW_ANE & er32(TXCW))) { |
ad68076e BA |
621 | /* |
622 | * If we force link for non-auto-negotiation switch, check | |
bc7f75fa AK |
623 | * link status based on MAC synchronization for internal |
624 | * serdes media type. | |
625 | */ | |
626 | /* SYNCH bit and IV bit are sticky. */ | |
627 | udelay(10); | |
63dcf3d3 BA |
628 | rxcw = er32(RXCW); |
629 | if (rxcw & E1000_RXCW_SYNCH) { | |
bc7f75fa | 630 | if (!(rxcw & E1000_RXCW_IV)) { |
63dcf3d3 | 631 | mac->serdes_has_link = true; |
3bb99fe2 | 632 | e_dbg("SERDES: Link up - forced.\n"); |
bc7f75fa AK |
633 | } |
634 | } else { | |
63dcf3d3 | 635 | mac->serdes_has_link = false; |
3bb99fe2 | 636 | e_dbg("SERDES: Link down - force failed.\n"); |
bc7f75fa AK |
637 | } |
638 | } | |
639 | ||
640 | if (E1000_TXCW_ANE & er32(TXCW)) { | |
641 | status = er32(STATUS); | |
63dcf3d3 BA |
642 | if (status & E1000_STATUS_LU) { |
643 | /* SYNCH bit and IV bit are sticky, so reread rxcw. */ | |
644 | udelay(10); | |
645 | rxcw = er32(RXCW); | |
646 | if (rxcw & E1000_RXCW_SYNCH) { | |
647 | if (!(rxcw & E1000_RXCW_IV)) { | |
648 | mac->serdes_has_link = true; | |
3bb99fe2 | 649 | e_dbg("SERDES: Link up - autoneg " |
3ad2f3fb | 650 | "completed successfully.\n"); |
63dcf3d3 BA |
651 | } else { |
652 | mac->serdes_has_link = false; | |
3bb99fe2 | 653 | e_dbg("SERDES: Link down - invalid" |
63dcf3d3 BA |
654 | "codewords detected in autoneg.\n"); |
655 | } | |
656 | } else { | |
657 | mac->serdes_has_link = false; | |
3bb99fe2 | 658 | e_dbg("SERDES: Link down - no sync.\n"); |
63dcf3d3 BA |
659 | } |
660 | } else { | |
661 | mac->serdes_has_link = false; | |
3bb99fe2 | 662 | e_dbg("SERDES: Link down - autoneg failed\n"); |
63dcf3d3 | 663 | } |
bc7f75fa AK |
664 | } |
665 | ||
666 | return 0; | |
667 | } | |
668 | ||
669 | /** | |
670 | * e1000_set_default_fc_generic - Set flow control default values | |
671 | * @hw: pointer to the HW structure | |
672 | * | |
673 | * Read the EEPROM for the default values for flow control and store the | |
674 | * values. | |
675 | **/ | |
676 | static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) | |
677 | { | |
bc7f75fa AK |
678 | s32 ret_val; |
679 | u16 nvm_data; | |
680 | ||
ad68076e BA |
681 | /* |
682 | * Read and store word 0x0F of the EEPROM. This word contains bits | |
bc7f75fa AK |
683 | * that determine the hardware's default PAUSE (flow control) mode, |
684 | * a bit that determines whether the HW defaults to enabling or | |
685 | * disabling auto-negotiation, and the direction of the | |
686 | * SW defined pins. If there is no SW over-ride of the flow | |
687 | * control setting, then the variable hw->fc will | |
688 | * be initialized based on a value in the EEPROM. | |
689 | */ | |
690 | ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); | |
691 | ||
692 | if (ret_val) { | |
3bb99fe2 | 693 | e_dbg("NVM Read Error\n"); |
bc7f75fa AK |
694 | return ret_val; |
695 | } | |
696 | ||
697 | if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0) | |
5c48ef3e | 698 | hw->fc.requested_mode = e1000_fc_none; |
bc7f75fa AK |
699 | else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == |
700 | NVM_WORD0F_ASM_DIR) | |
5c48ef3e | 701 | hw->fc.requested_mode = e1000_fc_tx_pause; |
bc7f75fa | 702 | else |
5c48ef3e | 703 | hw->fc.requested_mode = e1000_fc_full; |
bc7f75fa AK |
704 | |
705 | return 0; | |
706 | } | |
707 | ||
708 | /** | |
709 | * e1000e_setup_link - Setup flow control and link settings | |
710 | * @hw: pointer to the HW structure | |
711 | * | |
712 | * Determines which flow control settings to use, then configures flow | |
713 | * control. Calls the appropriate media-specific link configuration | |
714 | * function. Assuming the adapter has a valid link partner, a valid link | |
715 | * should be established. Assumes the hardware has previously been reset | |
716 | * and the transmitter and receiver are not enabled. | |
717 | **/ | |
718 | s32 e1000e_setup_link(struct e1000_hw *hw) | |
719 | { | |
720 | struct e1000_mac_info *mac = &hw->mac; | |
721 | s32 ret_val; | |
722 | ||
ad68076e BA |
723 | /* |
724 | * In the case of the phy reset being blocked, we already have a link. | |
bc7f75fa AK |
725 | * We do not need to set it up again. |
726 | */ | |
727 | if (e1000_check_reset_block(hw)) | |
728 | return 0; | |
729 | ||
309af40b | 730 | /* |
5c48ef3e BA |
731 | * If requested flow control is set to default, set flow control |
732 | * based on the EEPROM flow control settings. | |
309af40b | 733 | */ |
5c48ef3e | 734 | if (hw->fc.requested_mode == e1000_fc_default) { |
309af40b AK |
735 | ret_val = e1000_set_default_fc_generic(hw); |
736 | if (ret_val) | |
737 | return ret_val; | |
738 | } | |
bc7f75fa | 739 | |
ad68076e | 740 | /* |
5c48ef3e BA |
741 | * Save off the requested flow control mode for use later. Depending |
742 | * on the link partner's capabilities, we may or may not use this mode. | |
bc7f75fa | 743 | */ |
5c48ef3e | 744 | hw->fc.current_mode = hw->fc.requested_mode; |
bc7f75fa | 745 | |
3bb99fe2 | 746 | e_dbg("After fix-ups FlowControl is now = %x\n", |
5c48ef3e | 747 | hw->fc.current_mode); |
bc7f75fa AK |
748 | |
749 | /* Call the necessary media_type subroutine to configure the link. */ | |
750 | ret_val = mac->ops.setup_physical_interface(hw); | |
751 | if (ret_val) | |
752 | return ret_val; | |
753 | ||
ad68076e BA |
754 | /* |
755 | * Initialize the flow control address, type, and PAUSE timer | |
bc7f75fa AK |
756 | * registers to their default values. This is done even if flow |
757 | * control is disabled, because it does not hurt anything to | |
758 | * initialize these registers. | |
759 | */ | |
3bb99fe2 | 760 | e_dbg("Initializing the Flow Control address, type and timer regs\n"); |
bc7f75fa AK |
761 | ew32(FCT, FLOW_CONTROL_TYPE); |
762 | ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); | |
763 | ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); | |
764 | ||
318a94d6 | 765 | ew32(FCTTV, hw->fc.pause_time); |
bc7f75fa AK |
766 | |
767 | return e1000e_set_fc_watermarks(hw); | |
768 | } | |
769 | ||
770 | /** | |
771 | * e1000_commit_fc_settings_generic - Configure flow control | |
772 | * @hw: pointer to the HW structure | |
773 | * | |
774 | * Write the flow control settings to the Transmit Config Word Register (TXCW) | |
775 | * base on the flow control settings in e1000_mac_info. | |
776 | **/ | |
777 | static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) | |
778 | { | |
779 | struct e1000_mac_info *mac = &hw->mac; | |
780 | u32 txcw; | |
781 | ||
ad68076e BA |
782 | /* |
783 | * Check for a software override of the flow control settings, and | |
bc7f75fa AK |
784 | * setup the device accordingly. If auto-negotiation is enabled, then |
785 | * software will have to set the "PAUSE" bits to the correct value in | |
786 | * the Transmit Config Word Register (TXCW) and re-start auto- | |
787 | * negotiation. However, if auto-negotiation is disabled, then | |
788 | * software will have to manually configure the two flow control enable | |
789 | * bits in the CTRL register. | |
790 | * | |
791 | * The possible values of the "fc" parameter are: | |
792 | * 0: Flow control is completely disabled | |
793 | * 1: Rx flow control is enabled (we can receive pause frames, | |
794 | * but not send pause frames). | |
795 | * 2: Tx flow control is enabled (we can send pause frames but we | |
796 | * do not support receiving pause frames). | |
ad68076e | 797 | * 3: Both Rx and Tx flow control (symmetric) are enabled. |
bc7f75fa | 798 | */ |
5c48ef3e | 799 | switch (hw->fc.current_mode) { |
bc7f75fa AK |
800 | case e1000_fc_none: |
801 | /* Flow control completely disabled by a software over-ride. */ | |
802 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); | |
803 | break; | |
804 | case e1000_fc_rx_pause: | |
ad68076e BA |
805 | /* |
806 | * Rx Flow control is enabled and Tx Flow control is disabled | |
bc7f75fa | 807 | * by a software over-ride. Since there really isn't a way to |
ad68076e BA |
808 | * advertise that we are capable of Rx Pause ONLY, we will |
809 | * advertise that we support both symmetric and asymmetric Rx | |
bc7f75fa AK |
810 | * PAUSE. Later, we will disable the adapter's ability to send |
811 | * PAUSE frames. | |
812 | */ | |
813 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); | |
814 | break; | |
815 | case e1000_fc_tx_pause: | |
ad68076e BA |
816 | /* |
817 | * Tx Flow control is enabled, and Rx Flow control is disabled, | |
bc7f75fa AK |
818 | * by a software over-ride. |
819 | */ | |
820 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); | |
821 | break; | |
822 | case e1000_fc_full: | |
ad68076e BA |
823 | /* |
824 | * Flow control (both Rx and Tx) is enabled by a software | |
bc7f75fa AK |
825 | * over-ride. |
826 | */ | |
827 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); | |
828 | break; | |
829 | default: | |
3bb99fe2 | 830 | e_dbg("Flow control param set incorrectly\n"); |
bc7f75fa AK |
831 | return -E1000_ERR_CONFIG; |
832 | break; | |
833 | } | |
834 | ||
835 | ew32(TXCW, txcw); | |
836 | mac->txcw = txcw; | |
837 | ||
838 | return 0; | |
839 | } | |
840 | ||
841 | /** | |
842 | * e1000_poll_fiber_serdes_link_generic - Poll for link up | |
843 | * @hw: pointer to the HW structure | |
844 | * | |
845 | * Polls for link up by reading the status register, if link fails to come | |
846 | * up with auto-negotiation, then the link is forced if a signal is detected. | |
847 | **/ | |
848 | static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) | |
849 | { | |
850 | struct e1000_mac_info *mac = &hw->mac; | |
851 | u32 i, status; | |
852 | s32 ret_val; | |
853 | ||
ad68076e BA |
854 | /* |
855 | * If we have a signal (the cable is plugged in, or assumed true for | |
bc7f75fa AK |
856 | * serdes media) then poll for a "Link-Up" indication in the Device |
857 | * Status Register. Time-out if a link isn't seen in 500 milliseconds | |
858 | * seconds (Auto-negotiation should complete in less than 500 | |
859 | * milliseconds even if the other end is doing it in SW). | |
860 | */ | |
861 | for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { | |
862 | msleep(10); | |
863 | status = er32(STATUS); | |
864 | if (status & E1000_STATUS_LU) | |
865 | break; | |
866 | } | |
867 | if (i == FIBER_LINK_UP_LIMIT) { | |
3bb99fe2 | 868 | e_dbg("Never got a valid link from auto-neg!!!\n"); |
bc7f75fa | 869 | mac->autoneg_failed = 1; |
ad68076e BA |
870 | /* |
871 | * AutoNeg failed to achieve a link, so we'll call | |
bc7f75fa AK |
872 | * mac->check_for_link. This routine will force the |
873 | * link up if we detect a signal. This will allow us to | |
874 | * communicate with non-autonegotiating link partners. | |
875 | */ | |
876 | ret_val = mac->ops.check_for_link(hw); | |
877 | if (ret_val) { | |
3bb99fe2 | 878 | e_dbg("Error while checking for link\n"); |
bc7f75fa AK |
879 | return ret_val; |
880 | } | |
881 | mac->autoneg_failed = 0; | |
882 | } else { | |
883 | mac->autoneg_failed = 0; | |
3bb99fe2 | 884 | e_dbg("Valid Link Found\n"); |
bc7f75fa AK |
885 | } |
886 | ||
887 | return 0; | |
888 | } | |
889 | ||
890 | /** | |
891 | * e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes | |
892 | * @hw: pointer to the HW structure | |
893 | * | |
894 | * Configures collision distance and flow control for fiber and serdes | |
895 | * links. Upon successful setup, poll for link. | |
896 | **/ | |
897 | s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) | |
898 | { | |
899 | u32 ctrl; | |
900 | s32 ret_val; | |
901 | ||
902 | ctrl = er32(CTRL); | |
903 | ||
904 | /* Take the link out of reset */ | |
905 | ctrl &= ~E1000_CTRL_LRST; | |
906 | ||
907 | e1000e_config_collision_dist(hw); | |
908 | ||
909 | ret_val = e1000_commit_fc_settings_generic(hw); | |
910 | if (ret_val) | |
911 | return ret_val; | |
912 | ||
ad68076e BA |
913 | /* |
914 | * Since auto-negotiation is enabled, take the link out of reset (the | |
bc7f75fa AK |
915 | * link will be in reset, because we previously reset the chip). This |
916 | * will restart auto-negotiation. If auto-negotiation is successful | |
917 | * then the link-up status bit will be set and the flow control enable | |
918 | * bits (RFCE and TFCE) will be set according to their negotiated value. | |
919 | */ | |
3bb99fe2 | 920 | e_dbg("Auto-negotiation enabled\n"); |
bc7f75fa AK |
921 | |
922 | ew32(CTRL, ctrl); | |
923 | e1e_flush(); | |
924 | msleep(1); | |
925 | ||
ad68076e BA |
926 | /* |
927 | * For these adapters, the SW definable pin 1 is set when the optics | |
bc7f75fa AK |
928 | * detect a signal. If we have a signal, then poll for a "Link-Up" |
929 | * indication. | |
930 | */ | |
318a94d6 | 931 | if (hw->phy.media_type == e1000_media_type_internal_serdes || |
bc7f75fa AK |
932 | (er32(CTRL) & E1000_CTRL_SWDPIN1)) { |
933 | ret_val = e1000_poll_fiber_serdes_link_generic(hw); | |
934 | } else { | |
3bb99fe2 | 935 | e_dbg("No signal detected\n"); |
bc7f75fa AK |
936 | } |
937 | ||
938 | return 0; | |
939 | } | |
940 | ||
941 | /** | |
942 | * e1000e_config_collision_dist - Configure collision distance | |
943 | * @hw: pointer to the HW structure | |
944 | * | |
945 | * Configures the collision distance to the default value and is used | |
946 | * during link setup. Currently no func pointer exists and all | |
947 | * implementations are handled in the generic version of this function. | |
948 | **/ | |
949 | void e1000e_config_collision_dist(struct e1000_hw *hw) | |
950 | { | |
951 | u32 tctl; | |
952 | ||
953 | tctl = er32(TCTL); | |
954 | ||
955 | tctl &= ~E1000_TCTL_COLD; | |
956 | tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; | |
957 | ||
958 | ew32(TCTL, tctl); | |
959 | e1e_flush(); | |
960 | } | |
961 | ||
962 | /** | |
963 | * e1000e_set_fc_watermarks - Set flow control high/low watermarks | |
964 | * @hw: pointer to the HW structure | |
965 | * | |
966 | * Sets the flow control high/low threshold (watermark) registers. If | |
967 | * flow control XON frame transmission is enabled, then set XON frame | |
ad68076e | 968 | * transmission as well. |
bc7f75fa AK |
969 | **/ |
970 | s32 e1000e_set_fc_watermarks(struct e1000_hw *hw) | |
971 | { | |
bc7f75fa AK |
972 | u32 fcrtl = 0, fcrth = 0; |
973 | ||
ad68076e BA |
974 | /* |
975 | * Set the flow control receive threshold registers. Normally, | |
bc7f75fa AK |
976 | * these registers will be set to a default threshold that may be |
977 | * adjusted later by the driver's runtime code. However, if the | |
978 | * ability to transmit pause frames is not enabled, then these | |
979 | * registers will be set to 0. | |
980 | */ | |
5c48ef3e | 981 | if (hw->fc.current_mode & e1000_fc_tx_pause) { |
ad68076e BA |
982 | /* |
983 | * We need to set up the Receive Threshold high and low water | |
bc7f75fa AK |
984 | * marks as well as (optionally) enabling the transmission of |
985 | * XON frames. | |
986 | */ | |
318a94d6 | 987 | fcrtl = hw->fc.low_water; |
bc7f75fa | 988 | fcrtl |= E1000_FCRTL_XONE; |
318a94d6 | 989 | fcrth = hw->fc.high_water; |
bc7f75fa AK |
990 | } |
991 | ew32(FCRTL, fcrtl); | |
992 | ew32(FCRTH, fcrth); | |
993 | ||
994 | return 0; | |
995 | } | |
996 | ||
997 | /** | |
998 | * e1000e_force_mac_fc - Force the MAC's flow control settings | |
999 | * @hw: pointer to the HW structure | |
1000 | * | |
1001 | * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the | |
1002 | * device control register to reflect the adapter settings. TFCE and RFCE | |
1003 | * need to be explicitly set by software when a copper PHY is used because | |
1004 | * autonegotiation is managed by the PHY rather than the MAC. Software must | |
1005 | * also configure these bits when link is forced on a fiber connection. | |
1006 | **/ | |
1007 | s32 e1000e_force_mac_fc(struct e1000_hw *hw) | |
1008 | { | |
bc7f75fa AK |
1009 | u32 ctrl; |
1010 | ||
1011 | ctrl = er32(CTRL); | |
1012 | ||
ad68076e BA |
1013 | /* |
1014 | * Because we didn't get link via the internal auto-negotiation | |
bc7f75fa AK |
1015 | * mechanism (we either forced link or we got link via PHY |
1016 | * auto-neg), we have to manually enable/disable transmit an | |
1017 | * receive flow control. | |
1018 | * | |
1019 | * The "Case" statement below enables/disable flow control | |
5c48ef3e | 1020 | * according to the "hw->fc.current_mode" parameter. |
bc7f75fa AK |
1021 | * |
1022 | * The possible values of the "fc" parameter are: | |
1023 | * 0: Flow control is completely disabled | |
1024 | * 1: Rx flow control is enabled (we can receive pause | |
1025 | * frames but not send pause frames). | |
1026 | * 2: Tx flow control is enabled (we can send pause frames | |
1027 | * frames but we do not receive pause frames). | |
ad68076e | 1028 | * 3: Both Rx and Tx flow control (symmetric) is enabled. |
bc7f75fa AK |
1029 | * other: No other values should be possible at this point. |
1030 | */ | |
3bb99fe2 | 1031 | e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); |
bc7f75fa | 1032 | |
5c48ef3e | 1033 | switch (hw->fc.current_mode) { |
bc7f75fa AK |
1034 | case e1000_fc_none: |
1035 | ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); | |
1036 | break; | |
1037 | case e1000_fc_rx_pause: | |
1038 | ctrl &= (~E1000_CTRL_TFCE); | |
1039 | ctrl |= E1000_CTRL_RFCE; | |
1040 | break; | |
1041 | case e1000_fc_tx_pause: | |
1042 | ctrl &= (~E1000_CTRL_RFCE); | |
1043 | ctrl |= E1000_CTRL_TFCE; | |
1044 | break; | |
1045 | case e1000_fc_full: | |
1046 | ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); | |
1047 | break; | |
1048 | default: | |
3bb99fe2 | 1049 | e_dbg("Flow control param set incorrectly\n"); |
bc7f75fa AK |
1050 | return -E1000_ERR_CONFIG; |
1051 | } | |
1052 | ||
1053 | ew32(CTRL, ctrl); | |
1054 | ||
1055 | return 0; | |
1056 | } | |
1057 | ||
1058 | /** | |
1059 | * e1000e_config_fc_after_link_up - Configures flow control after link | |
1060 | * @hw: pointer to the HW structure | |
1061 | * | |
1062 | * Checks the status of auto-negotiation after link up to ensure that the | |
1063 | * speed and duplex were not forced. If the link needed to be forced, then | |
1064 | * flow control needs to be forced also. If auto-negotiation is enabled | |
1065 | * and did not fail, then we configure flow control based on our link | |
1066 | * partner. | |
1067 | **/ | |
1068 | s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) | |
1069 | { | |
1070 | struct e1000_mac_info *mac = &hw->mac; | |
1071 | s32 ret_val = 0; | |
1072 | u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; | |
1073 | u16 speed, duplex; | |
1074 | ||
ad68076e BA |
1075 | /* |
1076 | * Check for the case where we have fiber media and auto-neg failed | |
bc7f75fa AK |
1077 | * so we had to force link. In this case, we need to force the |
1078 | * configuration of the MAC to match the "fc" parameter. | |
1079 | */ | |
1080 | if (mac->autoneg_failed) { | |
318a94d6 JK |
1081 | if (hw->phy.media_type == e1000_media_type_fiber || |
1082 | hw->phy.media_type == e1000_media_type_internal_serdes) | |
bc7f75fa AK |
1083 | ret_val = e1000e_force_mac_fc(hw); |
1084 | } else { | |
318a94d6 | 1085 | if (hw->phy.media_type == e1000_media_type_copper) |
bc7f75fa AK |
1086 | ret_val = e1000e_force_mac_fc(hw); |
1087 | } | |
1088 | ||
1089 | if (ret_val) { | |
3bb99fe2 | 1090 | e_dbg("Error forcing flow control settings\n"); |
bc7f75fa AK |
1091 | return ret_val; |
1092 | } | |
1093 | ||
ad68076e BA |
1094 | /* |
1095 | * Check for the case where we have copper media and auto-neg is | |
bc7f75fa AK |
1096 | * enabled. In this case, we need to check and see if Auto-Neg |
1097 | * has completed, and if so, how the PHY and link partner has | |
1098 | * flow control configured. | |
1099 | */ | |
318a94d6 | 1100 | if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { |
ad68076e BA |
1101 | /* |
1102 | * Read the MII Status Register and check to see if AutoNeg | |
bc7f75fa AK |
1103 | * has completed. We read this twice because this reg has |
1104 | * some "sticky" (latched) bits. | |
1105 | */ | |
1106 | ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); | |
1107 | if (ret_val) | |
1108 | return ret_val; | |
1109 | ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); | |
1110 | if (ret_val) | |
1111 | return ret_val; | |
1112 | ||
1113 | if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { | |
3bb99fe2 | 1114 | e_dbg("Copper PHY and Auto Neg " |
bc7f75fa AK |
1115 | "has not completed.\n"); |
1116 | return ret_val; | |
1117 | } | |
1118 | ||
ad68076e BA |
1119 | /* |
1120 | * The AutoNeg process has completed, so we now need to | |
bc7f75fa AK |
1121 | * read both the Auto Negotiation Advertisement |
1122 | * Register (Address 4) and the Auto_Negotiation Base | |
1123 | * Page Ability Register (Address 5) to determine how | |
1124 | * flow control was negotiated. | |
1125 | */ | |
1126 | ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); | |
1127 | if (ret_val) | |
1128 | return ret_val; | |
1129 | ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); | |
1130 | if (ret_val) | |
1131 | return ret_val; | |
1132 | ||
ad68076e BA |
1133 | /* |
1134 | * Two bits in the Auto Negotiation Advertisement Register | |
bc7f75fa AK |
1135 | * (Address 4) and two bits in the Auto Negotiation Base |
1136 | * Page Ability Register (Address 5) determine flow control | |
1137 | * for both the PHY and the link partner. The following | |
1138 | * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, | |
1139 | * 1999, describes these PAUSE resolution bits and how flow | |
1140 | * control is determined based upon these settings. | |
1141 | * NOTE: DC = Don't Care | |
1142 | * | |
1143 | * LOCAL DEVICE | LINK PARTNER | |
1144 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution | |
1145 | *-------|---------|-------|---------|-------------------- | |
1146 | * 0 | 0 | DC | DC | e1000_fc_none | |
1147 | * 0 | 1 | 0 | DC | e1000_fc_none | |
1148 | * 0 | 1 | 1 | 0 | e1000_fc_none | |
1149 | * 0 | 1 | 1 | 1 | e1000_fc_tx_pause | |
1150 | * 1 | 0 | 0 | DC | e1000_fc_none | |
1151 | * 1 | DC | 1 | DC | e1000_fc_full | |
1152 | * 1 | 1 | 0 | 0 | e1000_fc_none | |
1153 | * 1 | 1 | 0 | 1 | e1000_fc_rx_pause | |
1154 | * | |
ad68076e | 1155 | * Are both PAUSE bits set to 1? If so, this implies |
bc7f75fa AK |
1156 | * Symmetric Flow Control is enabled at both ends. The |
1157 | * ASM_DIR bits are irrelevant per the spec. | |
1158 | * | |
1159 | * For Symmetric Flow Control: | |
1160 | * | |
1161 | * LOCAL DEVICE | LINK PARTNER | |
1162 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1163 | *-------|---------|-------|---------|-------------------- | |
1164 | * 1 | DC | 1 | DC | E1000_fc_full | |
1165 | * | |
1166 | */ | |
1167 | if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1168 | (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { | |
ad68076e BA |
1169 | /* |
1170 | * Now we need to check if the user selected Rx ONLY | |
bc7f75fa | 1171 | * of pause frames. In this case, we had to advertise |
ad68076e | 1172 | * FULL flow control because we could not advertise Rx |
bc7f75fa AK |
1173 | * ONLY. Hence, we must now check to see if we need to |
1174 | * turn OFF the TRANSMISSION of PAUSE frames. | |
1175 | */ | |
5c48ef3e BA |
1176 | if (hw->fc.requested_mode == e1000_fc_full) { |
1177 | hw->fc.current_mode = e1000_fc_full; | |
3bb99fe2 | 1178 | e_dbg("Flow Control = FULL.\r\n"); |
bc7f75fa | 1179 | } else { |
5c48ef3e | 1180 | hw->fc.current_mode = e1000_fc_rx_pause; |
3bb99fe2 | 1181 | e_dbg("Flow Control = " |
bc7f75fa AK |
1182 | "RX PAUSE frames only.\r\n"); |
1183 | } | |
1184 | } | |
ad68076e BA |
1185 | /* |
1186 | * For receiving PAUSE frames ONLY. | |
bc7f75fa AK |
1187 | * |
1188 | * LOCAL DEVICE | LINK PARTNER | |
1189 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1190 | *-------|---------|-------|---------|-------------------- | |
1191 | * 0 | 1 | 1 | 1 | e1000_fc_tx_pause | |
bc7f75fa AK |
1192 | */ |
1193 | else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1194 | (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && | |
1195 | (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && | |
1196 | (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { | |
5c48ef3e | 1197 | hw->fc.current_mode = e1000_fc_tx_pause; |
3bb99fe2 | 1198 | e_dbg("Flow Control = Tx PAUSE frames only.\r\n"); |
bc7f75fa | 1199 | } |
ad68076e BA |
1200 | /* |
1201 | * For transmitting PAUSE frames ONLY. | |
bc7f75fa AK |
1202 | * |
1203 | * LOCAL DEVICE | LINK PARTNER | |
1204 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1205 | *-------|---------|-------|---------|-------------------- | |
1206 | * 1 | 1 | 0 | 1 | e1000_fc_rx_pause | |
bc7f75fa AK |
1207 | */ |
1208 | else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1209 | (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && | |
1210 | !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && | |
1211 | (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { | |
5c48ef3e | 1212 | hw->fc.current_mode = e1000_fc_rx_pause; |
3bb99fe2 | 1213 | e_dbg("Flow Control = Rx PAUSE frames only.\r\n"); |
de92d84e JB |
1214 | } else { |
1215 | /* | |
1216 | * Per the IEEE spec, at this point flow control | |
1217 | * should be disabled. | |
1218 | */ | |
5c48ef3e | 1219 | hw->fc.current_mode = e1000_fc_none; |
3bb99fe2 | 1220 | e_dbg("Flow Control = NONE.\r\n"); |
bc7f75fa AK |
1221 | } |
1222 | ||
ad68076e BA |
1223 | /* |
1224 | * Now we need to do one last check... If we auto- | |
bc7f75fa AK |
1225 | * negotiated to HALF DUPLEX, flow control should not be |
1226 | * enabled per IEEE 802.3 spec. | |
1227 | */ | |
1228 | ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); | |
1229 | if (ret_val) { | |
3bb99fe2 | 1230 | e_dbg("Error getting link speed and duplex\n"); |
bc7f75fa AK |
1231 | return ret_val; |
1232 | } | |
1233 | ||
1234 | if (duplex == HALF_DUPLEX) | |
5c48ef3e | 1235 | hw->fc.current_mode = e1000_fc_none; |
bc7f75fa | 1236 | |
ad68076e BA |
1237 | /* |
1238 | * Now we call a subroutine to actually force the MAC | |
bc7f75fa AK |
1239 | * controller to use the correct flow control settings. |
1240 | */ | |
1241 | ret_val = e1000e_force_mac_fc(hw); | |
1242 | if (ret_val) { | |
3bb99fe2 | 1243 | e_dbg("Error forcing flow control settings\n"); |
bc7f75fa AK |
1244 | return ret_val; |
1245 | } | |
1246 | } | |
1247 | ||
1248 | return 0; | |
1249 | } | |
1250 | ||
1251 | /** | |
489815ce | 1252 | * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex |
bc7f75fa AK |
1253 | * @hw: pointer to the HW structure |
1254 | * @speed: stores the current speed | |
1255 | * @duplex: stores the current duplex | |
1256 | * | |
1257 | * Read the status register for the current speed/duplex and store the current | |
1258 | * speed and duplex for copper connections. | |
1259 | **/ | |
1260 | s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex) | |
1261 | { | |
1262 | u32 status; | |
1263 | ||
1264 | status = er32(STATUS); | |
1265 | if (status & E1000_STATUS_SPEED_1000) { | |
1266 | *speed = SPEED_1000; | |
3bb99fe2 | 1267 | e_dbg("1000 Mbs, "); |
bc7f75fa AK |
1268 | } else if (status & E1000_STATUS_SPEED_100) { |
1269 | *speed = SPEED_100; | |
3bb99fe2 | 1270 | e_dbg("100 Mbs, "); |
bc7f75fa AK |
1271 | } else { |
1272 | *speed = SPEED_10; | |
3bb99fe2 | 1273 | e_dbg("10 Mbs, "); |
bc7f75fa AK |
1274 | } |
1275 | ||
1276 | if (status & E1000_STATUS_FD) { | |
1277 | *duplex = FULL_DUPLEX; | |
3bb99fe2 | 1278 | e_dbg("Full Duplex\n"); |
bc7f75fa AK |
1279 | } else { |
1280 | *duplex = HALF_DUPLEX; | |
3bb99fe2 | 1281 | e_dbg("Half Duplex\n"); |
bc7f75fa AK |
1282 | } |
1283 | ||
1284 | return 0; | |
1285 | } | |
1286 | ||
1287 | /** | |
489815ce | 1288 | * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex |
bc7f75fa AK |
1289 | * @hw: pointer to the HW structure |
1290 | * @speed: stores the current speed | |
1291 | * @duplex: stores the current duplex | |
1292 | * | |
1293 | * Sets the speed and duplex to gigabit full duplex (the only possible option) | |
1294 | * for fiber/serdes links. | |
1295 | **/ | |
1296 | s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex) | |
1297 | { | |
1298 | *speed = SPEED_1000; | |
1299 | *duplex = FULL_DUPLEX; | |
1300 | ||
1301 | return 0; | |
1302 | } | |
1303 | ||
1304 | /** | |
1305 | * e1000e_get_hw_semaphore - Acquire hardware semaphore | |
1306 | * @hw: pointer to the HW structure | |
1307 | * | |
1308 | * Acquire the HW semaphore to access the PHY or NVM | |
1309 | **/ | |
1310 | s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) | |
1311 | { | |
1312 | u32 swsm; | |
1313 | s32 timeout = hw->nvm.word_size + 1; | |
1314 | s32 i = 0; | |
1315 | ||
1316 | /* Get the SW semaphore */ | |
1317 | while (i < timeout) { | |
1318 | swsm = er32(SWSM); | |
1319 | if (!(swsm & E1000_SWSM_SMBI)) | |
1320 | break; | |
1321 | ||
1322 | udelay(50); | |
1323 | i++; | |
1324 | } | |
1325 | ||
1326 | if (i == timeout) { | |
3bb99fe2 | 1327 | e_dbg("Driver can't access device - SMBI bit is set.\n"); |
bc7f75fa AK |
1328 | return -E1000_ERR_NVM; |
1329 | } | |
1330 | ||
1331 | /* Get the FW semaphore. */ | |
1332 | for (i = 0; i < timeout; i++) { | |
1333 | swsm = er32(SWSM); | |
1334 | ew32(SWSM, swsm | E1000_SWSM_SWESMBI); | |
1335 | ||
1336 | /* Semaphore acquired if bit latched */ | |
1337 | if (er32(SWSM) & E1000_SWSM_SWESMBI) | |
1338 | break; | |
1339 | ||
1340 | udelay(50); | |
1341 | } | |
1342 | ||
1343 | if (i == timeout) { | |
1344 | /* Release semaphores */ | |
1345 | e1000e_put_hw_semaphore(hw); | |
3bb99fe2 | 1346 | e_dbg("Driver can't access the NVM\n"); |
bc7f75fa AK |
1347 | return -E1000_ERR_NVM; |
1348 | } | |
1349 | ||
1350 | return 0; | |
1351 | } | |
1352 | ||
1353 | /** | |
1354 | * e1000e_put_hw_semaphore - Release hardware semaphore | |
1355 | * @hw: pointer to the HW structure | |
1356 | * | |
1357 | * Release hardware semaphore used to access the PHY or NVM | |
1358 | **/ | |
1359 | void e1000e_put_hw_semaphore(struct e1000_hw *hw) | |
1360 | { | |
1361 | u32 swsm; | |
1362 | ||
1363 | swsm = er32(SWSM); | |
1364 | swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); | |
1365 | ew32(SWSM, swsm); | |
1366 | } | |
1367 | ||
1368 | /** | |
1369 | * e1000e_get_auto_rd_done - Check for auto read completion | |
1370 | * @hw: pointer to the HW structure | |
1371 | * | |
1372 | * Check EEPROM for Auto Read done bit. | |
1373 | **/ | |
1374 | s32 e1000e_get_auto_rd_done(struct e1000_hw *hw) | |
1375 | { | |
1376 | s32 i = 0; | |
1377 | ||
1378 | while (i < AUTO_READ_DONE_TIMEOUT) { | |
1379 | if (er32(EECD) & E1000_EECD_AUTO_RD) | |
1380 | break; | |
1381 | msleep(1); | |
1382 | i++; | |
1383 | } | |
1384 | ||
1385 | if (i == AUTO_READ_DONE_TIMEOUT) { | |
3bb99fe2 | 1386 | e_dbg("Auto read by HW from NVM has not completed.\n"); |
bc7f75fa AK |
1387 | return -E1000_ERR_RESET; |
1388 | } | |
1389 | ||
1390 | return 0; | |
1391 | } | |
1392 | ||
1393 | /** | |
1394 | * e1000e_valid_led_default - Verify a valid default LED config | |
1395 | * @hw: pointer to the HW structure | |
1396 | * @data: pointer to the NVM (EEPROM) | |
1397 | * | |
1398 | * Read the EEPROM for the current default LED configuration. If the | |
1399 | * LED configuration is not valid, set to a valid LED configuration. | |
1400 | **/ | |
1401 | s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data) | |
1402 | { | |
1403 | s32 ret_val; | |
1404 | ||
1405 | ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); | |
1406 | if (ret_val) { | |
3bb99fe2 | 1407 | e_dbg("NVM Read Error\n"); |
bc7f75fa AK |
1408 | return ret_val; |
1409 | } | |
1410 | ||
1411 | if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) | |
1412 | *data = ID_LED_DEFAULT; | |
1413 | ||
1414 | return 0; | |
1415 | } | |
1416 | ||
1417 | /** | |
1418 | * e1000e_id_led_init - | |
1419 | * @hw: pointer to the HW structure | |
1420 | * | |
1421 | **/ | |
1422 | s32 e1000e_id_led_init(struct e1000_hw *hw) | |
1423 | { | |
1424 | struct e1000_mac_info *mac = &hw->mac; | |
1425 | s32 ret_val; | |
1426 | const u32 ledctl_mask = 0x000000FF; | |
1427 | const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; | |
1428 | const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; | |
1429 | u16 data, i, temp; | |
1430 | const u16 led_mask = 0x0F; | |
1431 | ||
1432 | ret_val = hw->nvm.ops.valid_led_default(hw, &data); | |
1433 | if (ret_val) | |
1434 | return ret_val; | |
1435 | ||
1436 | mac->ledctl_default = er32(LEDCTL); | |
1437 | mac->ledctl_mode1 = mac->ledctl_default; | |
1438 | mac->ledctl_mode2 = mac->ledctl_default; | |
1439 | ||
1440 | for (i = 0; i < 4; i++) { | |
1441 | temp = (data >> (i << 2)) & led_mask; | |
1442 | switch (temp) { | |
1443 | case ID_LED_ON1_DEF2: | |
1444 | case ID_LED_ON1_ON2: | |
1445 | case ID_LED_ON1_OFF2: | |
1446 | mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); | |
1447 | mac->ledctl_mode1 |= ledctl_on << (i << 3); | |
1448 | break; | |
1449 | case ID_LED_OFF1_DEF2: | |
1450 | case ID_LED_OFF1_ON2: | |
1451 | case ID_LED_OFF1_OFF2: | |
1452 | mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); | |
1453 | mac->ledctl_mode1 |= ledctl_off << (i << 3); | |
1454 | break; | |
1455 | default: | |
1456 | /* Do nothing */ | |
1457 | break; | |
1458 | } | |
1459 | switch (temp) { | |
1460 | case ID_LED_DEF1_ON2: | |
1461 | case ID_LED_ON1_ON2: | |
1462 | case ID_LED_OFF1_ON2: | |
1463 | mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); | |
1464 | mac->ledctl_mode2 |= ledctl_on << (i << 3); | |
1465 | break; | |
1466 | case ID_LED_DEF1_OFF2: | |
1467 | case ID_LED_ON1_OFF2: | |
1468 | case ID_LED_OFF1_OFF2: | |
1469 | mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); | |
1470 | mac->ledctl_mode2 |= ledctl_off << (i << 3); | |
1471 | break; | |
1472 | default: | |
1473 | /* Do nothing */ | |
1474 | break; | |
1475 | } | |
1476 | } | |
1477 | ||
1478 | return 0; | |
1479 | } | |
1480 | ||
a4f58f54 BA |
1481 | /** |
1482 | * e1000e_setup_led_generic - Configures SW controllable LED | |
1483 | * @hw: pointer to the HW structure | |
1484 | * | |
1485 | * This prepares the SW controllable LED for use and saves the current state | |
1486 | * of the LED so it can be later restored. | |
1487 | **/ | |
1488 | s32 e1000e_setup_led_generic(struct e1000_hw *hw) | |
1489 | { | |
1490 | u32 ledctl; | |
1491 | ||
1492 | if (hw->mac.ops.setup_led != e1000e_setup_led_generic) { | |
1493 | return -E1000_ERR_CONFIG; | |
1494 | } | |
1495 | ||
1496 | if (hw->phy.media_type == e1000_media_type_fiber) { | |
1497 | ledctl = er32(LEDCTL); | |
1498 | hw->mac.ledctl_default = ledctl; | |
1499 | /* Turn off LED0 */ | |
1500 | ledctl &= ~(E1000_LEDCTL_LED0_IVRT | | |
1501 | E1000_LEDCTL_LED0_BLINK | | |
1502 | E1000_LEDCTL_LED0_MODE_MASK); | |
1503 | ledctl |= (E1000_LEDCTL_MODE_LED_OFF << | |
1504 | E1000_LEDCTL_LED0_MODE_SHIFT); | |
1505 | ew32(LEDCTL, ledctl); | |
1506 | } else if (hw->phy.media_type == e1000_media_type_copper) { | |
1507 | ew32(LEDCTL, hw->mac.ledctl_mode1); | |
1508 | } | |
1509 | ||
1510 | return 0; | |
1511 | } | |
1512 | ||
bc7f75fa AK |
1513 | /** |
1514 | * e1000e_cleanup_led_generic - Set LED config to default operation | |
1515 | * @hw: pointer to the HW structure | |
1516 | * | |
1517 | * Remove the current LED configuration and set the LED configuration | |
1518 | * to the default value, saved from the EEPROM. | |
1519 | **/ | |
1520 | s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) | |
1521 | { | |
1522 | ew32(LEDCTL, hw->mac.ledctl_default); | |
1523 | return 0; | |
1524 | } | |
1525 | ||
1526 | /** | |
1527 | * e1000e_blink_led - Blink LED | |
1528 | * @hw: pointer to the HW structure | |
1529 | * | |
489815ce | 1530 | * Blink the LEDs which are set to be on. |
bc7f75fa AK |
1531 | **/ |
1532 | s32 e1000e_blink_led(struct e1000_hw *hw) | |
1533 | { | |
1534 | u32 ledctl_blink = 0; | |
1535 | u32 i; | |
1536 | ||
318a94d6 | 1537 | if (hw->phy.media_type == e1000_media_type_fiber) { |
bc7f75fa AK |
1538 | /* always blink LED0 for PCI-E fiber */ |
1539 | ledctl_blink = E1000_LEDCTL_LED0_BLINK | | |
1540 | (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); | |
1541 | } else { | |
ad68076e BA |
1542 | /* |
1543 | * set the blink bit for each LED that's "on" (0x0E) | |
1544 | * in ledctl_mode2 | |
1545 | */ | |
bc7f75fa AK |
1546 | ledctl_blink = hw->mac.ledctl_mode2; |
1547 | for (i = 0; i < 4; i++) | |
1548 | if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == | |
1549 | E1000_LEDCTL_MODE_LED_ON) | |
1550 | ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << | |
1551 | (i * 8)); | |
1552 | } | |
1553 | ||
1554 | ew32(LEDCTL, ledctl_blink); | |
1555 | ||
1556 | return 0; | |
1557 | } | |
1558 | ||
1559 | /** | |
1560 | * e1000e_led_on_generic - Turn LED on | |
1561 | * @hw: pointer to the HW structure | |
1562 | * | |
1563 | * Turn LED on. | |
1564 | **/ | |
1565 | s32 e1000e_led_on_generic(struct e1000_hw *hw) | |
1566 | { | |
1567 | u32 ctrl; | |
1568 | ||
318a94d6 | 1569 | switch (hw->phy.media_type) { |
bc7f75fa AK |
1570 | case e1000_media_type_fiber: |
1571 | ctrl = er32(CTRL); | |
1572 | ctrl &= ~E1000_CTRL_SWDPIN0; | |
1573 | ctrl |= E1000_CTRL_SWDPIO0; | |
1574 | ew32(CTRL, ctrl); | |
1575 | break; | |
1576 | case e1000_media_type_copper: | |
1577 | ew32(LEDCTL, hw->mac.ledctl_mode2); | |
1578 | break; | |
1579 | default: | |
1580 | break; | |
1581 | } | |
1582 | ||
1583 | return 0; | |
1584 | } | |
1585 | ||
1586 | /** | |
1587 | * e1000e_led_off_generic - Turn LED off | |
1588 | * @hw: pointer to the HW structure | |
1589 | * | |
1590 | * Turn LED off. | |
1591 | **/ | |
1592 | s32 e1000e_led_off_generic(struct e1000_hw *hw) | |
1593 | { | |
1594 | u32 ctrl; | |
1595 | ||
318a94d6 | 1596 | switch (hw->phy.media_type) { |
bc7f75fa AK |
1597 | case e1000_media_type_fiber: |
1598 | ctrl = er32(CTRL); | |
1599 | ctrl |= E1000_CTRL_SWDPIN0; | |
1600 | ctrl |= E1000_CTRL_SWDPIO0; | |
1601 | ew32(CTRL, ctrl); | |
1602 | break; | |
1603 | case e1000_media_type_copper: | |
1604 | ew32(LEDCTL, hw->mac.ledctl_mode1); | |
1605 | break; | |
1606 | default: | |
1607 | break; | |
1608 | } | |
1609 | ||
1610 | return 0; | |
1611 | } | |
1612 | ||
1613 | /** | |
1614 | * e1000e_set_pcie_no_snoop - Set PCI-express capabilities | |
1615 | * @hw: pointer to the HW structure | |
1616 | * @no_snoop: bitmap of snoop events | |
1617 | * | |
1618 | * Set the PCI-express register to snoop for events enabled in 'no_snoop'. | |
1619 | **/ | |
1620 | void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop) | |
1621 | { | |
1622 | u32 gcr; | |
1623 | ||
1624 | if (no_snoop) { | |
1625 | gcr = er32(GCR); | |
1626 | gcr &= ~(PCIE_NO_SNOOP_ALL); | |
1627 | gcr |= no_snoop; | |
1628 | ew32(GCR, gcr); | |
1629 | } | |
1630 | } | |
1631 | ||
1632 | /** | |
1633 | * e1000e_disable_pcie_master - Disables PCI-express master access | |
1634 | * @hw: pointer to the HW structure | |
1635 | * | |
1636 | * Returns 0 if successful, else returns -10 | |
489815ce | 1637 | * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused |
bc7f75fa AK |
1638 | * the master requests to be disabled. |
1639 | * | |
1640 | * Disables PCI-Express master access and verifies there are no pending | |
1641 | * requests. | |
1642 | **/ | |
1643 | s32 e1000e_disable_pcie_master(struct e1000_hw *hw) | |
1644 | { | |
1645 | u32 ctrl; | |
1646 | s32 timeout = MASTER_DISABLE_TIMEOUT; | |
1647 | ||
1648 | ctrl = er32(CTRL); | |
1649 | ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; | |
1650 | ew32(CTRL, ctrl); | |
1651 | ||
1652 | while (timeout) { | |
1653 | if (!(er32(STATUS) & | |
1654 | E1000_STATUS_GIO_MASTER_ENABLE)) | |
1655 | break; | |
1656 | udelay(100); | |
1657 | timeout--; | |
1658 | } | |
1659 | ||
1660 | if (!timeout) { | |
3bb99fe2 | 1661 | e_dbg("Master requests are pending.\n"); |
bc7f75fa AK |
1662 | return -E1000_ERR_MASTER_REQUESTS_PENDING; |
1663 | } | |
1664 | ||
1665 | return 0; | |
1666 | } | |
1667 | ||
1668 | /** | |
1669 | * e1000e_reset_adaptive - Reset Adaptive Interframe Spacing | |
1670 | * @hw: pointer to the HW structure | |
1671 | * | |
1672 | * Reset the Adaptive Interframe Spacing throttle to default values. | |
1673 | **/ | |
1674 | void e1000e_reset_adaptive(struct e1000_hw *hw) | |
1675 | { | |
1676 | struct e1000_mac_info *mac = &hw->mac; | |
1677 | ||
f464ba87 BA |
1678 | if (!mac->adaptive_ifs) { |
1679 | e_dbg("Not in Adaptive IFS mode!\n"); | |
1680 | goto out; | |
1681 | } | |
1682 | ||
bc7f75fa AK |
1683 | mac->current_ifs_val = 0; |
1684 | mac->ifs_min_val = IFS_MIN; | |
1685 | mac->ifs_max_val = IFS_MAX; | |
1686 | mac->ifs_step_size = IFS_STEP; | |
1687 | mac->ifs_ratio = IFS_RATIO; | |
1688 | ||
564ea9bb | 1689 | mac->in_ifs_mode = false; |
bc7f75fa | 1690 | ew32(AIT, 0); |
f464ba87 BA |
1691 | out: |
1692 | return; | |
bc7f75fa AK |
1693 | } |
1694 | ||
1695 | /** | |
1696 | * e1000e_update_adaptive - Update Adaptive Interframe Spacing | |
1697 | * @hw: pointer to the HW structure | |
1698 | * | |
1699 | * Update the Adaptive Interframe Spacing Throttle value based on the | |
1700 | * time between transmitted packets and time between collisions. | |
1701 | **/ | |
1702 | void e1000e_update_adaptive(struct e1000_hw *hw) | |
1703 | { | |
1704 | struct e1000_mac_info *mac = &hw->mac; | |
1705 | ||
f464ba87 BA |
1706 | if (!mac->adaptive_ifs) { |
1707 | e_dbg("Not in Adaptive IFS mode!\n"); | |
1708 | goto out; | |
1709 | } | |
1710 | ||
bc7f75fa AK |
1711 | if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { |
1712 | if (mac->tx_packet_delta > MIN_NUM_XMITS) { | |
564ea9bb | 1713 | mac->in_ifs_mode = true; |
bc7f75fa AK |
1714 | if (mac->current_ifs_val < mac->ifs_max_val) { |
1715 | if (!mac->current_ifs_val) | |
1716 | mac->current_ifs_val = mac->ifs_min_val; | |
1717 | else | |
1718 | mac->current_ifs_val += | |
1719 | mac->ifs_step_size; | |
ad68076e | 1720 | ew32(AIT, mac->current_ifs_val); |
bc7f75fa AK |
1721 | } |
1722 | } | |
1723 | } else { | |
1724 | if (mac->in_ifs_mode && | |
1725 | (mac->tx_packet_delta <= MIN_NUM_XMITS)) { | |
1726 | mac->current_ifs_val = 0; | |
564ea9bb | 1727 | mac->in_ifs_mode = false; |
bc7f75fa AK |
1728 | ew32(AIT, 0); |
1729 | } | |
1730 | } | |
f464ba87 BA |
1731 | out: |
1732 | return; | |
bc7f75fa AK |
1733 | } |
1734 | ||
1735 | /** | |
1736 | * e1000_raise_eec_clk - Raise EEPROM clock | |
1737 | * @hw: pointer to the HW structure | |
1738 | * @eecd: pointer to the EEPROM | |
1739 | * | |
1740 | * Enable/Raise the EEPROM clock bit. | |
1741 | **/ | |
1742 | static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) | |
1743 | { | |
1744 | *eecd = *eecd | E1000_EECD_SK; | |
1745 | ew32(EECD, *eecd); | |
1746 | e1e_flush(); | |
1747 | udelay(hw->nvm.delay_usec); | |
1748 | } | |
1749 | ||
1750 | /** | |
1751 | * e1000_lower_eec_clk - Lower EEPROM clock | |
1752 | * @hw: pointer to the HW structure | |
1753 | * @eecd: pointer to the EEPROM | |
1754 | * | |
1755 | * Clear/Lower the EEPROM clock bit. | |
1756 | **/ | |
1757 | static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) | |
1758 | { | |
1759 | *eecd = *eecd & ~E1000_EECD_SK; | |
1760 | ew32(EECD, *eecd); | |
1761 | e1e_flush(); | |
1762 | udelay(hw->nvm.delay_usec); | |
1763 | } | |
1764 | ||
1765 | /** | |
1766 | * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM | |
1767 | * @hw: pointer to the HW structure | |
1768 | * @data: data to send to the EEPROM | |
1769 | * @count: number of bits to shift out | |
1770 | * | |
1771 | * We need to shift 'count' bits out to the EEPROM. So, the value in the | |
1772 | * "data" parameter will be shifted out to the EEPROM one bit at a time. | |
1773 | * In order to do this, "data" must be broken down into bits. | |
1774 | **/ | |
1775 | static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) | |
1776 | { | |
1777 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1778 | u32 eecd = er32(EECD); | |
1779 | u32 mask; | |
1780 | ||
1781 | mask = 0x01 << (count - 1); | |
1782 | if (nvm->type == e1000_nvm_eeprom_spi) | |
1783 | eecd |= E1000_EECD_DO; | |
1784 | ||
1785 | do { | |
1786 | eecd &= ~E1000_EECD_DI; | |
1787 | ||
1788 | if (data & mask) | |
1789 | eecd |= E1000_EECD_DI; | |
1790 | ||
1791 | ew32(EECD, eecd); | |
1792 | e1e_flush(); | |
1793 | ||
1794 | udelay(nvm->delay_usec); | |
1795 | ||
1796 | e1000_raise_eec_clk(hw, &eecd); | |
1797 | e1000_lower_eec_clk(hw, &eecd); | |
1798 | ||
1799 | mask >>= 1; | |
1800 | } while (mask); | |
1801 | ||
1802 | eecd &= ~E1000_EECD_DI; | |
1803 | ew32(EECD, eecd); | |
1804 | } | |
1805 | ||
1806 | /** | |
1807 | * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM | |
1808 | * @hw: pointer to the HW structure | |
1809 | * @count: number of bits to shift in | |
1810 | * | |
1811 | * In order to read a register from the EEPROM, we need to shift 'count' bits | |
1812 | * in from the EEPROM. Bits are "shifted in" by raising the clock input to | |
1813 | * the EEPROM (setting the SK bit), and then reading the value of the data out | |
1814 | * "DO" bit. During this "shifting in" process the data in "DI" bit should | |
1815 | * always be clear. | |
1816 | **/ | |
1817 | static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) | |
1818 | { | |
1819 | u32 eecd; | |
1820 | u32 i; | |
1821 | u16 data; | |
1822 | ||
1823 | eecd = er32(EECD); | |
1824 | ||
1825 | eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); | |
1826 | data = 0; | |
1827 | ||
1828 | for (i = 0; i < count; i++) { | |
1829 | data <<= 1; | |
1830 | e1000_raise_eec_clk(hw, &eecd); | |
1831 | ||
1832 | eecd = er32(EECD); | |
1833 | ||
1834 | eecd &= ~E1000_EECD_DI; | |
1835 | if (eecd & E1000_EECD_DO) | |
1836 | data |= 1; | |
1837 | ||
1838 | e1000_lower_eec_clk(hw, &eecd); | |
1839 | } | |
1840 | ||
1841 | return data; | |
1842 | } | |
1843 | ||
1844 | /** | |
1845 | * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion | |
1846 | * @hw: pointer to the HW structure | |
1847 | * @ee_reg: EEPROM flag for polling | |
1848 | * | |
1849 | * Polls the EEPROM status bit for either read or write completion based | |
1850 | * upon the value of 'ee_reg'. | |
1851 | **/ | |
1852 | s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) | |
1853 | { | |
1854 | u32 attempts = 100000; | |
1855 | u32 i, reg = 0; | |
1856 | ||
1857 | for (i = 0; i < attempts; i++) { | |
1858 | if (ee_reg == E1000_NVM_POLL_READ) | |
1859 | reg = er32(EERD); | |
1860 | else | |
1861 | reg = er32(EEWR); | |
1862 | ||
1863 | if (reg & E1000_NVM_RW_REG_DONE) | |
1864 | return 0; | |
1865 | ||
1866 | udelay(5); | |
1867 | } | |
1868 | ||
1869 | return -E1000_ERR_NVM; | |
1870 | } | |
1871 | ||
1872 | /** | |
1873 | * e1000e_acquire_nvm - Generic request for access to EEPROM | |
1874 | * @hw: pointer to the HW structure | |
1875 | * | |
1876 | * Set the EEPROM access request bit and wait for EEPROM access grant bit. | |
1877 | * Return successful if access grant bit set, else clear the request for | |
1878 | * EEPROM access and return -E1000_ERR_NVM (-1). | |
1879 | **/ | |
1880 | s32 e1000e_acquire_nvm(struct e1000_hw *hw) | |
1881 | { | |
1882 | u32 eecd = er32(EECD); | |
1883 | s32 timeout = E1000_NVM_GRANT_ATTEMPTS; | |
1884 | ||
1885 | ew32(EECD, eecd | E1000_EECD_REQ); | |
1886 | eecd = er32(EECD); | |
1887 | ||
1888 | while (timeout) { | |
1889 | if (eecd & E1000_EECD_GNT) | |
1890 | break; | |
1891 | udelay(5); | |
1892 | eecd = er32(EECD); | |
1893 | timeout--; | |
1894 | } | |
1895 | ||
1896 | if (!timeout) { | |
1897 | eecd &= ~E1000_EECD_REQ; | |
1898 | ew32(EECD, eecd); | |
3bb99fe2 | 1899 | e_dbg("Could not acquire NVM grant\n"); |
bc7f75fa AK |
1900 | return -E1000_ERR_NVM; |
1901 | } | |
1902 | ||
1903 | return 0; | |
1904 | } | |
1905 | ||
1906 | /** | |
1907 | * e1000_standby_nvm - Return EEPROM to standby state | |
1908 | * @hw: pointer to the HW structure | |
1909 | * | |
1910 | * Return the EEPROM to a standby state. | |
1911 | **/ | |
1912 | static void e1000_standby_nvm(struct e1000_hw *hw) | |
1913 | { | |
1914 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1915 | u32 eecd = er32(EECD); | |
1916 | ||
1917 | if (nvm->type == e1000_nvm_eeprom_spi) { | |
1918 | /* Toggle CS to flush commands */ | |
1919 | eecd |= E1000_EECD_CS; | |
1920 | ew32(EECD, eecd); | |
1921 | e1e_flush(); | |
1922 | udelay(nvm->delay_usec); | |
1923 | eecd &= ~E1000_EECD_CS; | |
1924 | ew32(EECD, eecd); | |
1925 | e1e_flush(); | |
1926 | udelay(nvm->delay_usec); | |
1927 | } | |
1928 | } | |
1929 | ||
1930 | /** | |
1931 | * e1000_stop_nvm - Terminate EEPROM command | |
1932 | * @hw: pointer to the HW structure | |
1933 | * | |
1934 | * Terminates the current command by inverting the EEPROM's chip select pin. | |
1935 | **/ | |
1936 | static void e1000_stop_nvm(struct e1000_hw *hw) | |
1937 | { | |
1938 | u32 eecd; | |
1939 | ||
1940 | eecd = er32(EECD); | |
1941 | if (hw->nvm.type == e1000_nvm_eeprom_spi) { | |
1942 | /* Pull CS high */ | |
1943 | eecd |= E1000_EECD_CS; | |
1944 | e1000_lower_eec_clk(hw, &eecd); | |
1945 | } | |
1946 | } | |
1947 | ||
1948 | /** | |
1949 | * e1000e_release_nvm - Release exclusive access to EEPROM | |
1950 | * @hw: pointer to the HW structure | |
1951 | * | |
1952 | * Stop any current commands to the EEPROM and clear the EEPROM request bit. | |
1953 | **/ | |
1954 | void e1000e_release_nvm(struct e1000_hw *hw) | |
1955 | { | |
1956 | u32 eecd; | |
1957 | ||
1958 | e1000_stop_nvm(hw); | |
1959 | ||
1960 | eecd = er32(EECD); | |
1961 | eecd &= ~E1000_EECD_REQ; | |
1962 | ew32(EECD, eecd); | |
1963 | } | |
1964 | ||
1965 | /** | |
1966 | * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write | |
1967 | * @hw: pointer to the HW structure | |
1968 | * | |
1969 | * Setups the EEPROM for reading and writing. | |
1970 | **/ | |
1971 | static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) | |
1972 | { | |
1973 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1974 | u32 eecd = er32(EECD); | |
1975 | u16 timeout = 0; | |
1976 | u8 spi_stat_reg; | |
1977 | ||
1978 | if (nvm->type == e1000_nvm_eeprom_spi) { | |
1979 | /* Clear SK and CS */ | |
1980 | eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); | |
1981 | ew32(EECD, eecd); | |
1982 | udelay(1); | |
1983 | timeout = NVM_MAX_RETRY_SPI; | |
1984 | ||
ad68076e BA |
1985 | /* |
1986 | * Read "Status Register" repeatedly until the LSB is cleared. | |
bc7f75fa AK |
1987 | * The EEPROM will signal that the command has been completed |
1988 | * by clearing bit 0 of the internal status register. If it's | |
ad68076e BA |
1989 | * not cleared within 'timeout', then error out. |
1990 | */ | |
bc7f75fa AK |
1991 | while (timeout) { |
1992 | e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, | |
1993 | hw->nvm.opcode_bits); | |
1994 | spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); | |
1995 | if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) | |
1996 | break; | |
1997 | ||
1998 | udelay(5); | |
1999 | e1000_standby_nvm(hw); | |
2000 | timeout--; | |
2001 | } | |
2002 | ||
2003 | if (!timeout) { | |
3bb99fe2 | 2004 | e_dbg("SPI NVM Status error\n"); |
bc7f75fa AK |
2005 | return -E1000_ERR_NVM; |
2006 | } | |
2007 | } | |
2008 | ||
2009 | return 0; | |
2010 | } | |
2011 | ||
bc7f75fa AK |
2012 | /** |
2013 | * e1000e_read_nvm_eerd - Reads EEPROM using EERD register | |
2014 | * @hw: pointer to the HW structure | |
2015 | * @offset: offset of word in the EEPROM to read | |
2016 | * @words: number of words to read | |
2017 | * @data: word read from the EEPROM | |
2018 | * | |
2019 | * Reads a 16 bit word from the EEPROM using the EERD register. | |
2020 | **/ | |
2021 | s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) | |
2022 | { | |
2023 | struct e1000_nvm_info *nvm = &hw->nvm; | |
2024 | u32 i, eerd = 0; | |
2025 | s32 ret_val = 0; | |
2026 | ||
ad68076e BA |
2027 | /* |
2028 | * A check for invalid values: offset too large, too many words, | |
2029 | * too many words for the offset, and not enough words. | |
2030 | */ | |
bc7f75fa AK |
2031 | if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || |
2032 | (words == 0)) { | |
3bb99fe2 | 2033 | e_dbg("nvm parameter(s) out of bounds\n"); |
bc7f75fa AK |
2034 | return -E1000_ERR_NVM; |
2035 | } | |
2036 | ||
2037 | for (i = 0; i < words; i++) { | |
2038 | eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + | |
2039 | E1000_NVM_RW_REG_START; | |
2040 | ||
2041 | ew32(EERD, eerd); | |
2042 | ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); | |
2043 | if (ret_val) | |
2044 | break; | |
2045 | ||
ad68076e | 2046 | data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA); |
bc7f75fa AK |
2047 | } |
2048 | ||
2049 | return ret_val; | |
2050 | } | |
2051 | ||
2052 | /** | |
2053 | * e1000e_write_nvm_spi - Write to EEPROM using SPI | |
2054 | * @hw: pointer to the HW structure | |
2055 | * @offset: offset within the EEPROM to be written to | |
2056 | * @words: number of words to write | |
2057 | * @data: 16 bit word(s) to be written to the EEPROM | |
2058 | * | |
2059 | * Writes data to EEPROM at offset using SPI interface. | |
2060 | * | |
2061 | * If e1000e_update_nvm_checksum is not called after this function , the | |
489815ce | 2062 | * EEPROM will most likely contain an invalid checksum. |
bc7f75fa AK |
2063 | **/ |
2064 | s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) | |
2065 | { | |
2066 | struct e1000_nvm_info *nvm = &hw->nvm; | |
2067 | s32 ret_val; | |
2068 | u16 widx = 0; | |
2069 | ||
ad68076e BA |
2070 | /* |
2071 | * A check for invalid values: offset too large, too many words, | |
2072 | * and not enough words. | |
2073 | */ | |
bc7f75fa AK |
2074 | if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || |
2075 | (words == 0)) { | |
3bb99fe2 | 2076 | e_dbg("nvm parameter(s) out of bounds\n"); |
bc7f75fa AK |
2077 | return -E1000_ERR_NVM; |
2078 | } | |
2079 | ||
94d8186a | 2080 | ret_val = nvm->ops.acquire(hw); |
bc7f75fa AK |
2081 | if (ret_val) |
2082 | return ret_val; | |
2083 | ||
2084 | msleep(10); | |
2085 | ||
2086 | while (widx < words) { | |
2087 | u8 write_opcode = NVM_WRITE_OPCODE_SPI; | |
2088 | ||
2089 | ret_val = e1000_ready_nvm_eeprom(hw); | |
2090 | if (ret_val) { | |
94d8186a | 2091 | nvm->ops.release(hw); |
bc7f75fa AK |
2092 | return ret_val; |
2093 | } | |
2094 | ||
2095 | e1000_standby_nvm(hw); | |
2096 | ||
2097 | /* Send the WRITE ENABLE command (8 bit opcode) */ | |
2098 | e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, | |
2099 | nvm->opcode_bits); | |
2100 | ||
2101 | e1000_standby_nvm(hw); | |
2102 | ||
ad68076e BA |
2103 | /* |
2104 | * Some SPI eeproms use the 8th address bit embedded in the | |
2105 | * opcode | |
2106 | */ | |
bc7f75fa AK |
2107 | if ((nvm->address_bits == 8) && (offset >= 128)) |
2108 | write_opcode |= NVM_A8_OPCODE_SPI; | |
2109 | ||
2110 | /* Send the Write command (8-bit opcode + addr) */ | |
2111 | e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); | |
2112 | e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), | |
2113 | nvm->address_bits); | |
2114 | ||
2115 | /* Loop to allow for up to whole page write of eeprom */ | |
2116 | while (widx < words) { | |
2117 | u16 word_out = data[widx]; | |
2118 | word_out = (word_out >> 8) | (word_out << 8); | |
2119 | e1000_shift_out_eec_bits(hw, word_out, 16); | |
2120 | widx++; | |
2121 | ||
2122 | if ((((offset + widx) * 2) % nvm->page_size) == 0) { | |
2123 | e1000_standby_nvm(hw); | |
2124 | break; | |
2125 | } | |
2126 | } | |
2127 | } | |
2128 | ||
2129 | msleep(10); | |
94d8186a | 2130 | nvm->ops.release(hw); |
bc7f75fa AK |
2131 | return 0; |
2132 | } | |
2133 | ||
2134 | /** | |
608f8a0d | 2135 | * e1000_read_mac_addr_generic - Read device MAC address |
bc7f75fa AK |
2136 | * @hw: pointer to the HW structure |
2137 | * | |
2138 | * Reads the device MAC address from the EEPROM and stores the value. | |
2139 | * Since devices with two ports use the same EEPROM, we increment the | |
2140 | * last bit in the MAC address for the second port. | |
2141 | **/ | |
608f8a0d | 2142 | s32 e1000_read_mac_addr_generic(struct e1000_hw *hw) |
bc7f75fa | 2143 | { |
608f8a0d BA |
2144 | u32 rar_high; |
2145 | u32 rar_low; | |
2146 | u16 i; | |
93ca1610 | 2147 | |
608f8a0d BA |
2148 | rar_high = er32(RAH(0)); |
2149 | rar_low = er32(RAL(0)); | |
bc7f75fa | 2150 | |
608f8a0d BA |
2151 | for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) |
2152 | hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); | |
bc7f75fa | 2153 | |
608f8a0d BA |
2154 | for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) |
2155 | hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); | |
bc7f75fa AK |
2156 | |
2157 | for (i = 0; i < ETH_ALEN; i++) | |
2158 | hw->mac.addr[i] = hw->mac.perm_addr[i]; | |
2159 | ||
2160 | return 0; | |
2161 | } | |
2162 | ||
2163 | /** | |
2164 | * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum | |
2165 | * @hw: pointer to the HW structure | |
2166 | * | |
2167 | * Calculates the EEPROM checksum by reading/adding each word of the EEPROM | |
2168 | * and then verifies that the sum of the EEPROM is equal to 0xBABA. | |
2169 | **/ | |
2170 | s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw) | |
2171 | { | |
2172 | s32 ret_val; | |
2173 | u16 checksum = 0; | |
2174 | u16 i, nvm_data; | |
2175 | ||
2176 | for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { | |
2177 | ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); | |
2178 | if (ret_val) { | |
3bb99fe2 | 2179 | e_dbg("NVM Read Error\n"); |
bc7f75fa AK |
2180 | return ret_val; |
2181 | } | |
2182 | checksum += nvm_data; | |
2183 | } | |
2184 | ||
2185 | if (checksum != (u16) NVM_SUM) { | |
3bb99fe2 | 2186 | e_dbg("NVM Checksum Invalid\n"); |
bc7f75fa AK |
2187 | return -E1000_ERR_NVM; |
2188 | } | |
2189 | ||
2190 | return 0; | |
2191 | } | |
2192 | ||
2193 | /** | |
2194 | * e1000e_update_nvm_checksum_generic - Update EEPROM checksum | |
2195 | * @hw: pointer to the HW structure | |
2196 | * | |
2197 | * Updates the EEPROM checksum by reading/adding each word of the EEPROM | |
2198 | * up to the checksum. Then calculates the EEPROM checksum and writes the | |
2199 | * value to the EEPROM. | |
2200 | **/ | |
2201 | s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) | |
2202 | { | |
2203 | s32 ret_val; | |
2204 | u16 checksum = 0; | |
2205 | u16 i, nvm_data; | |
2206 | ||
2207 | for (i = 0; i < NVM_CHECKSUM_REG; i++) { | |
2208 | ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); | |
2209 | if (ret_val) { | |
3bb99fe2 | 2210 | e_dbg("NVM Read Error while updating checksum.\n"); |
bc7f75fa AK |
2211 | return ret_val; |
2212 | } | |
2213 | checksum += nvm_data; | |
2214 | } | |
2215 | checksum = (u16) NVM_SUM - checksum; | |
2216 | ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); | |
2217 | if (ret_val) | |
3bb99fe2 | 2218 | e_dbg("NVM Write Error while updating checksum.\n"); |
bc7f75fa AK |
2219 | |
2220 | return ret_val; | |
2221 | } | |
2222 | ||
2223 | /** | |
2224 | * e1000e_reload_nvm - Reloads EEPROM | |
2225 | * @hw: pointer to the HW structure | |
2226 | * | |
2227 | * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the | |
2228 | * extended control register. | |
2229 | **/ | |
2230 | void e1000e_reload_nvm(struct e1000_hw *hw) | |
2231 | { | |
2232 | u32 ctrl_ext; | |
2233 | ||
2234 | udelay(10); | |
2235 | ctrl_ext = er32(CTRL_EXT); | |
2236 | ctrl_ext |= E1000_CTRL_EXT_EE_RST; | |
2237 | ew32(CTRL_EXT, ctrl_ext); | |
2238 | e1e_flush(); | |
2239 | } | |
2240 | ||
2241 | /** | |
2242 | * e1000_calculate_checksum - Calculate checksum for buffer | |
2243 | * @buffer: pointer to EEPROM | |
2244 | * @length: size of EEPROM to calculate a checksum for | |
2245 | * | |
2246 | * Calculates the checksum for some buffer on a specified length. The | |
2247 | * checksum calculated is returned. | |
2248 | **/ | |
2249 | static u8 e1000_calculate_checksum(u8 *buffer, u32 length) | |
2250 | { | |
2251 | u32 i; | |
2252 | u8 sum = 0; | |
2253 | ||
2254 | if (!buffer) | |
2255 | return 0; | |
2256 | ||
2257 | for (i = 0; i < length; i++) | |
2258 | sum += buffer[i]; | |
2259 | ||
2260 | return (u8) (0 - sum); | |
2261 | } | |
2262 | ||
2263 | /** | |
2264 | * e1000_mng_enable_host_if - Checks host interface is enabled | |
2265 | * @hw: pointer to the HW structure | |
2266 | * | |
2267 | * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND | |
2268 | * | |
489815ce | 2269 | * This function checks whether the HOST IF is enabled for command operation |
bc7f75fa AK |
2270 | * and also checks whether the previous command is completed. It busy waits |
2271 | * in case of previous command is not completed. | |
2272 | **/ | |
2273 | static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) | |
2274 | { | |
2275 | u32 hicr; | |
2276 | u8 i; | |
2277 | ||
2278 | /* Check that the host interface is enabled. */ | |
2279 | hicr = er32(HICR); | |
2280 | if ((hicr & E1000_HICR_EN) == 0) { | |
3bb99fe2 | 2281 | e_dbg("E1000_HOST_EN bit disabled.\n"); |
bc7f75fa AK |
2282 | return -E1000_ERR_HOST_INTERFACE_COMMAND; |
2283 | } | |
2284 | /* check the previous command is completed */ | |
2285 | for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { | |
2286 | hicr = er32(HICR); | |
2287 | if (!(hicr & E1000_HICR_C)) | |
2288 | break; | |
2289 | mdelay(1); | |
2290 | } | |
2291 | ||
2292 | if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { | |
3bb99fe2 | 2293 | e_dbg("Previous command timeout failed .\n"); |
bc7f75fa AK |
2294 | return -E1000_ERR_HOST_INTERFACE_COMMAND; |
2295 | } | |
2296 | ||
2297 | return 0; | |
2298 | } | |
2299 | ||
2300 | /** | |
4662e82b | 2301 | * e1000e_check_mng_mode_generic - check management mode |
bc7f75fa AK |
2302 | * @hw: pointer to the HW structure |
2303 | * | |
2304 | * Reads the firmware semaphore register and returns true (>0) if | |
2305 | * manageability is enabled, else false (0). | |
2306 | **/ | |
4662e82b | 2307 | bool e1000e_check_mng_mode_generic(struct e1000_hw *hw) |
bc7f75fa AK |
2308 | { |
2309 | u32 fwsm = er32(FWSM); | |
2310 | ||
4662e82b BA |
2311 | return (fwsm & E1000_FWSM_MODE_MASK) == |
2312 | (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); | |
bc7f75fa AK |
2313 | } |
2314 | ||
2315 | /** | |
ad68076e | 2316 | * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx |
bc7f75fa AK |
2317 | * @hw: pointer to the HW structure |
2318 | * | |
2319 | * Enables packet filtering on transmit packets if manageability is enabled | |
2320 | * and host interface is enabled. | |
2321 | **/ | |
2322 | bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) | |
2323 | { | |
2324 | struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; | |
2325 | u32 *buffer = (u32 *)&hw->mng_cookie; | |
2326 | u32 offset; | |
2327 | s32 ret_val, hdr_csum, csum; | |
2328 | u8 i, len; | |
2329 | ||
ca777f9c BA |
2330 | hw->mac.tx_pkt_filtering = true; |
2331 | ||
bc7f75fa AK |
2332 | /* No manageability, no filtering */ |
2333 | if (!e1000e_check_mng_mode(hw)) { | |
564ea9bb | 2334 | hw->mac.tx_pkt_filtering = false; |
ca777f9c | 2335 | goto out; |
bc7f75fa AK |
2336 | } |
2337 | ||
ad68076e BA |
2338 | /* |
2339 | * If we can't read from the host interface for whatever | |
bc7f75fa AK |
2340 | * reason, disable filtering. |
2341 | */ | |
2342 | ret_val = e1000_mng_enable_host_if(hw); | |
ca777f9c | 2343 | if (ret_val) { |
564ea9bb | 2344 | hw->mac.tx_pkt_filtering = false; |
ca777f9c | 2345 | goto out; |
bc7f75fa AK |
2346 | } |
2347 | ||
2348 | /* Read in the header. Length and offset are in dwords. */ | |
2349 | len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; | |
2350 | offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; | |
2351 | for (i = 0; i < len; i++) | |
2352 | *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i); | |
2353 | hdr_csum = hdr->checksum; | |
2354 | hdr->checksum = 0; | |
2355 | csum = e1000_calculate_checksum((u8 *)hdr, | |
2356 | E1000_MNG_DHCP_COOKIE_LENGTH); | |
ad68076e BA |
2357 | /* |
2358 | * If either the checksums or signature don't match, then | |
bc7f75fa AK |
2359 | * the cookie area isn't considered valid, in which case we |
2360 | * take the safe route of assuming Tx filtering is enabled. | |
2361 | */ | |
2362 | if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { | |
564ea9bb | 2363 | hw->mac.tx_pkt_filtering = true; |
ca777f9c | 2364 | goto out; |
bc7f75fa AK |
2365 | } |
2366 | ||
2367 | /* Cookie area is valid, make the final check for filtering. */ | |
2368 | if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) { | |
564ea9bb | 2369 | hw->mac.tx_pkt_filtering = false; |
ca777f9c | 2370 | goto out; |
bc7f75fa AK |
2371 | } |
2372 | ||
ca777f9c BA |
2373 | out: |
2374 | return hw->mac.tx_pkt_filtering; | |
bc7f75fa AK |
2375 | } |
2376 | ||
2377 | /** | |
2378 | * e1000_mng_write_cmd_header - Writes manageability command header | |
2379 | * @hw: pointer to the HW structure | |
2380 | * @hdr: pointer to the host interface command header | |
2381 | * | |
2382 | * Writes the command header after does the checksum calculation. | |
2383 | **/ | |
2384 | static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, | |
2385 | struct e1000_host_mng_command_header *hdr) | |
2386 | { | |
2387 | u16 i, length = sizeof(struct e1000_host_mng_command_header); | |
2388 | ||
2389 | /* Write the whole command header structure with new checksum. */ | |
2390 | ||
2391 | hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); | |
2392 | ||
2393 | length >>= 2; | |
2394 | /* Write the relevant command block into the ram area. */ | |
2395 | for (i = 0; i < length; i++) { | |
2396 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, | |
2397 | *((u32 *) hdr + i)); | |
2398 | e1e_flush(); | |
2399 | } | |
2400 | ||
2401 | return 0; | |
2402 | } | |
2403 | ||
2404 | /** | |
5ff5b664 | 2405 | * e1000_mng_host_if_write - Write to the manageability host interface |
bc7f75fa AK |
2406 | * @hw: pointer to the HW structure |
2407 | * @buffer: pointer to the host interface buffer | |
2408 | * @length: size of the buffer | |
2409 | * @offset: location in the buffer to write to | |
2410 | * @sum: sum of the data (not checksum) | |
2411 | * | |
2412 | * This function writes the buffer content at the offset given on the host if. | |
2413 | * It also does alignment considerations to do the writes in most efficient | |
2414 | * way. Also fills up the sum of the buffer in *buffer parameter. | |
2415 | **/ | |
2416 | static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, | |
2417 | u16 length, u16 offset, u8 *sum) | |
2418 | { | |
2419 | u8 *tmp; | |
2420 | u8 *bufptr = buffer; | |
2421 | u32 data = 0; | |
2422 | u16 remaining, i, j, prev_bytes; | |
2423 | ||
2424 | /* sum = only sum of the data and it is not checksum */ | |
2425 | ||
2426 | if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) | |
2427 | return -E1000_ERR_PARAM; | |
2428 | ||
2429 | tmp = (u8 *)&data; | |
2430 | prev_bytes = offset & 0x3; | |
2431 | offset >>= 2; | |
2432 | ||
2433 | if (prev_bytes) { | |
2434 | data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset); | |
2435 | for (j = prev_bytes; j < sizeof(u32); j++) { | |
2436 | *(tmp + j) = *bufptr++; | |
2437 | *sum += *(tmp + j); | |
2438 | } | |
2439 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data); | |
2440 | length -= j - prev_bytes; | |
2441 | offset++; | |
2442 | } | |
2443 | ||
2444 | remaining = length & 0x3; | |
2445 | length -= remaining; | |
2446 | ||
2447 | /* Calculate length in DWORDs */ | |
2448 | length >>= 2; | |
2449 | ||
ad68076e BA |
2450 | /* |
2451 | * The device driver writes the relevant command block into the | |
2452 | * ram area. | |
2453 | */ | |
bc7f75fa AK |
2454 | for (i = 0; i < length; i++) { |
2455 | for (j = 0; j < sizeof(u32); j++) { | |
2456 | *(tmp + j) = *bufptr++; | |
2457 | *sum += *(tmp + j); | |
2458 | } | |
2459 | ||
2460 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); | |
2461 | } | |
2462 | if (remaining) { | |
2463 | for (j = 0; j < sizeof(u32); j++) { | |
2464 | if (j < remaining) | |
2465 | *(tmp + j) = *bufptr++; | |
2466 | else | |
2467 | *(tmp + j) = 0; | |
2468 | ||
2469 | *sum += *(tmp + j); | |
2470 | } | |
2471 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); | |
2472 | } | |
2473 | ||
2474 | return 0; | |
2475 | } | |
2476 | ||
2477 | /** | |
2478 | * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface | |
2479 | * @hw: pointer to the HW structure | |
2480 | * @buffer: pointer to the host interface | |
2481 | * @length: size of the buffer | |
2482 | * | |
2483 | * Writes the DHCP information to the host interface. | |
2484 | **/ | |
2485 | s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) | |
2486 | { | |
2487 | struct e1000_host_mng_command_header hdr; | |
2488 | s32 ret_val; | |
2489 | u32 hicr; | |
2490 | ||
2491 | hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; | |
2492 | hdr.command_length = length; | |
2493 | hdr.reserved1 = 0; | |
2494 | hdr.reserved2 = 0; | |
2495 | hdr.checksum = 0; | |
2496 | ||
2497 | /* Enable the host interface */ | |
2498 | ret_val = e1000_mng_enable_host_if(hw); | |
2499 | if (ret_val) | |
2500 | return ret_val; | |
2501 | ||
2502 | /* Populate the host interface with the contents of "buffer". */ | |
2503 | ret_val = e1000_mng_host_if_write(hw, buffer, length, | |
2504 | sizeof(hdr), &(hdr.checksum)); | |
2505 | if (ret_val) | |
2506 | return ret_val; | |
2507 | ||
2508 | /* Write the manageability command header */ | |
2509 | ret_val = e1000_mng_write_cmd_header(hw, &hdr); | |
2510 | if (ret_val) | |
2511 | return ret_val; | |
2512 | ||
2513 | /* Tell the ARC a new command is pending. */ | |
2514 | hicr = er32(HICR); | |
2515 | ew32(HICR, hicr | E1000_HICR_C); | |
2516 | ||
2517 | return 0; | |
2518 | } | |
2519 | ||
2520 | /** | |
2521 | * e1000e_enable_mng_pass_thru - Enable processing of ARP's | |
2522 | * @hw: pointer to the HW structure | |
2523 | * | |
2524 | * Verifies the hardware needs to allow ARPs to be processed by the host. | |
2525 | **/ | |
2526 | bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) | |
2527 | { | |
2528 | u32 manc; | |
2529 | u32 fwsm, factps; | |
564ea9bb | 2530 | bool ret_val = false; |
bc7f75fa AK |
2531 | |
2532 | manc = er32(MANC); | |
2533 | ||
2534 | if (!(manc & E1000_MANC_RCV_TCO_EN) || | |
2535 | !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) | |
2536 | return ret_val; | |
2537 | ||
2538 | if (hw->mac.arc_subsystem_valid) { | |
2539 | fwsm = er32(FWSM); | |
2540 | factps = er32(FACTPS); | |
2541 | ||
2542 | if (!(factps & E1000_FACTPS_MNGCG) && | |
2543 | ((fwsm & E1000_FWSM_MODE_MASK) == | |
2544 | (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) { | |
564ea9bb | 2545 | ret_val = true; |
bc7f75fa AK |
2546 | return ret_val; |
2547 | } | |
2548 | } else { | |
2549 | if ((manc & E1000_MANC_SMBUS_EN) && | |
2550 | !(manc & E1000_MANC_ASF_EN)) { | |
564ea9bb | 2551 | ret_val = true; |
bc7f75fa AK |
2552 | return ret_val; |
2553 | } | |
2554 | } | |
2555 | ||
2556 | return ret_val; | |
2557 | } | |
2558 | ||
69e3fd8c | 2559 | s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num) |
bc7f75fa AK |
2560 | { |
2561 | s32 ret_val; | |
2562 | u16 nvm_data; | |
2563 | ||
2564 | ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); | |
2565 | if (ret_val) { | |
3bb99fe2 | 2566 | e_dbg("NVM Read Error\n"); |
bc7f75fa AK |
2567 | return ret_val; |
2568 | } | |
69e3fd8c | 2569 | *pba_num = (u32)(nvm_data << 16); |
bc7f75fa AK |
2570 | |
2571 | ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); | |
2572 | if (ret_val) { | |
3bb99fe2 | 2573 | e_dbg("NVM Read Error\n"); |
bc7f75fa AK |
2574 | return ret_val; |
2575 | } | |
69e3fd8c | 2576 | *pba_num |= nvm_data; |
bc7f75fa AK |
2577 | |
2578 | return 0; | |
2579 | } |