Commit | Line | Data |
---|---|---|
bc7f75fa AK |
1 | /******************************************************************************* |
2 | ||
3 | Intel PRO/1000 Linux driver | |
c7e54b1b | 4 | Copyright(c) 1999 - 2009 Intel Corporation. |
bc7f75fa AK |
5 | |
6 | This program is free software; you can redistribute it and/or modify it | |
7 | under the terms and conditions of the GNU General Public License, | |
8 | version 2, as published by the Free Software Foundation. | |
9 | ||
10 | This program is distributed in the hope it will be useful, but WITHOUT | |
11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
13 | more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License along with | |
16 | this program; if not, write to the Free Software Foundation, Inc., | |
17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
18 | ||
19 | The full GNU General Public License is included in this distribution in | |
20 | the file called "COPYING". | |
21 | ||
22 | Contact Information: | |
23 | Linux NICS <linux.nics@intel.com> | |
24 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
25 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
26 | ||
27 | *******************************************************************************/ | |
28 | ||
29 | /* | |
30 | * 82571EB Gigabit Ethernet Controller | |
1605927f | 31 | * 82571EB Gigabit Ethernet Controller (Copper) |
bc7f75fa | 32 | * 82571EB Gigabit Ethernet Controller (Fiber) |
ad68076e BA |
33 | * 82571EB Dual Port Gigabit Mezzanine Adapter |
34 | * 82571EB Quad Port Gigabit Mezzanine Adapter | |
35 | * 82571PT Gigabit PT Quad Port Server ExpressModule | |
bc7f75fa AK |
36 | * 82572EI Gigabit Ethernet Controller (Copper) |
37 | * 82572EI Gigabit Ethernet Controller (Fiber) | |
38 | * 82572EI Gigabit Ethernet Controller | |
39 | * 82573V Gigabit Ethernet Controller (Copper) | |
40 | * 82573E Gigabit Ethernet Controller (Copper) | |
41 | * 82573L Gigabit Ethernet Controller | |
4662e82b | 42 | * 82574L Gigabit Network Connection |
8c81c9c3 | 43 | * 82583V Gigabit Network Connection |
bc7f75fa AK |
44 | */ |
45 | ||
bc7f75fa AK |
46 | #include "e1000.h" |
47 | ||
48 | #define ID_LED_RESERVED_F746 0xF746 | |
49 | #define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \ | |
50 | (ID_LED_OFF1_ON2 << 8) | \ | |
51 | (ID_LED_DEF1_DEF2 << 4) | \ | |
52 | (ID_LED_DEF1_DEF2)) | |
53 | ||
54 | #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 | |
55 | ||
4662e82b BA |
56 | #define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ |
57 | ||
bc7f75fa AK |
58 | static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); |
59 | static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); | |
60 | static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); | |
c9523379 | 61 | static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw); |
bc7f75fa AK |
62 | static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, |
63 | u16 words, u16 *data); | |
64 | static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); | |
65 | static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); | |
66 | static s32 e1000_setup_link_82571(struct e1000_hw *hw); | |
67 | static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); | |
caaddaf8 | 68 | static void e1000_clear_vfta_82571(struct e1000_hw *hw); |
4662e82b BA |
69 | static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); |
70 | static s32 e1000_led_on_82574(struct e1000_hw *hw); | |
23a2d1b2 | 71 | static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); |
17f208de | 72 | static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw); |
bc7f75fa AK |
73 | |
74 | /** | |
75 | * e1000_init_phy_params_82571 - Init PHY func ptrs. | |
76 | * @hw: pointer to the HW structure | |
bc7f75fa AK |
77 | **/ |
78 | static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) | |
79 | { | |
80 | struct e1000_phy_info *phy = &hw->phy; | |
81 | s32 ret_val; | |
82 | ||
318a94d6 | 83 | if (hw->phy.media_type != e1000_media_type_copper) { |
bc7f75fa AK |
84 | phy->type = e1000_phy_none; |
85 | return 0; | |
86 | } | |
87 | ||
88 | phy->addr = 1; | |
89 | phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; | |
90 | phy->reset_delay_us = 100; | |
91 | ||
17f208de BA |
92 | phy->ops.power_up = e1000_power_up_phy_copper; |
93 | phy->ops.power_down = e1000_power_down_phy_copper_82571; | |
94 | ||
bc7f75fa AK |
95 | switch (hw->mac.type) { |
96 | case e1000_82571: | |
97 | case e1000_82572: | |
98 | phy->type = e1000_phy_igp_2; | |
99 | break; | |
100 | case e1000_82573: | |
101 | phy->type = e1000_phy_m88; | |
102 | break; | |
4662e82b | 103 | case e1000_82574: |
8c81c9c3 | 104 | case e1000_82583: |
4662e82b BA |
105 | phy->type = e1000_phy_bm; |
106 | break; | |
bc7f75fa AK |
107 | default: |
108 | return -E1000_ERR_PHY; | |
109 | break; | |
110 | } | |
111 | ||
112 | /* This can only be done after all function pointers are setup. */ | |
113 | ret_val = e1000_get_phy_id_82571(hw); | |
114 | ||
115 | /* Verify phy id */ | |
116 | switch (hw->mac.type) { | |
117 | case e1000_82571: | |
118 | case e1000_82572: | |
119 | if (phy->id != IGP01E1000_I_PHY_ID) | |
120 | return -E1000_ERR_PHY; | |
121 | break; | |
122 | case e1000_82573: | |
123 | if (phy->id != M88E1111_I_PHY_ID) | |
124 | return -E1000_ERR_PHY; | |
125 | break; | |
4662e82b | 126 | case e1000_82574: |
8c81c9c3 | 127 | case e1000_82583: |
4662e82b BA |
128 | if (phy->id != BME1000_E_PHY_ID_R2) |
129 | return -E1000_ERR_PHY; | |
130 | break; | |
bc7f75fa AK |
131 | default: |
132 | return -E1000_ERR_PHY; | |
133 | break; | |
134 | } | |
135 | ||
136 | return 0; | |
137 | } | |
138 | ||
139 | /** | |
140 | * e1000_init_nvm_params_82571 - Init NVM func ptrs. | |
141 | * @hw: pointer to the HW structure | |
bc7f75fa AK |
142 | **/ |
143 | static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) | |
144 | { | |
145 | struct e1000_nvm_info *nvm = &hw->nvm; | |
146 | u32 eecd = er32(EECD); | |
147 | u16 size; | |
148 | ||
149 | nvm->opcode_bits = 8; | |
150 | nvm->delay_usec = 1; | |
151 | switch (nvm->override) { | |
152 | case e1000_nvm_override_spi_large: | |
153 | nvm->page_size = 32; | |
154 | nvm->address_bits = 16; | |
155 | break; | |
156 | case e1000_nvm_override_spi_small: | |
157 | nvm->page_size = 8; | |
158 | nvm->address_bits = 8; | |
159 | break; | |
160 | default: | |
161 | nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; | |
162 | nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8; | |
163 | break; | |
164 | } | |
165 | ||
166 | switch (hw->mac.type) { | |
167 | case e1000_82573: | |
4662e82b | 168 | case e1000_82574: |
8c81c9c3 | 169 | case e1000_82583: |
bc7f75fa AK |
170 | if (((eecd >> 15) & 0x3) == 0x3) { |
171 | nvm->type = e1000_nvm_flash_hw; | |
172 | nvm->word_size = 2048; | |
ad68076e BA |
173 | /* |
174 | * Autonomous Flash update bit must be cleared due | |
bc7f75fa AK |
175 | * to Flash update issue. |
176 | */ | |
177 | eecd &= ~E1000_EECD_AUPDEN; | |
178 | ew32(EECD, eecd); | |
179 | break; | |
180 | } | |
181 | /* Fall Through */ | |
182 | default: | |
ad68076e | 183 | nvm->type = e1000_nvm_eeprom_spi; |
bc7f75fa AK |
184 | size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> |
185 | E1000_EECD_SIZE_EX_SHIFT); | |
ad68076e BA |
186 | /* |
187 | * Added to a constant, "size" becomes the left-shift value | |
bc7f75fa AK |
188 | * for setting word_size. |
189 | */ | |
190 | size += NVM_WORD_SIZE_BASE_SHIFT; | |
8d7c294c JK |
191 | |
192 | /* EEPROM access above 16k is unsupported */ | |
193 | if (size > 14) | |
194 | size = 14; | |
bc7f75fa AK |
195 | nvm->word_size = 1 << size; |
196 | break; | |
197 | } | |
198 | ||
199 | return 0; | |
200 | } | |
201 | ||
202 | /** | |
203 | * e1000_init_mac_params_82571 - Init MAC func ptrs. | |
204 | * @hw: pointer to the HW structure | |
bc7f75fa AK |
205 | **/ |
206 | static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) | |
207 | { | |
208 | struct e1000_hw *hw = &adapter->hw; | |
209 | struct e1000_mac_info *mac = &hw->mac; | |
210 | struct e1000_mac_operations *func = &mac->ops; | |
23a2d1b2 DG |
211 | u32 swsm = 0; |
212 | u32 swsm2 = 0; | |
213 | bool force_clear_smbi = false; | |
bc7f75fa AK |
214 | |
215 | /* Set media type */ | |
216 | switch (adapter->pdev->device) { | |
217 | case E1000_DEV_ID_82571EB_FIBER: | |
218 | case E1000_DEV_ID_82572EI_FIBER: | |
219 | case E1000_DEV_ID_82571EB_QUAD_FIBER: | |
318a94d6 | 220 | hw->phy.media_type = e1000_media_type_fiber; |
bc7f75fa AK |
221 | break; |
222 | case E1000_DEV_ID_82571EB_SERDES: | |
223 | case E1000_DEV_ID_82572EI_SERDES: | |
040babf9 AK |
224 | case E1000_DEV_ID_82571EB_SERDES_DUAL: |
225 | case E1000_DEV_ID_82571EB_SERDES_QUAD: | |
318a94d6 | 226 | hw->phy.media_type = e1000_media_type_internal_serdes; |
bc7f75fa AK |
227 | break; |
228 | default: | |
318a94d6 | 229 | hw->phy.media_type = e1000_media_type_copper; |
bc7f75fa AK |
230 | break; |
231 | } | |
232 | ||
233 | /* Set mta register count */ | |
234 | mac->mta_reg_count = 128; | |
235 | /* Set rar entry count */ | |
236 | mac->rar_entry_count = E1000_RAR_ENTRIES; | |
237 | /* Set if manageability features are enabled. */ | |
564ea9bb BA |
238 | mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) |
239 | ? true : false; | |
f464ba87 BA |
240 | /* Adaptive IFS supported */ |
241 | mac->adaptive_ifs = true; | |
bc7f75fa AK |
242 | |
243 | /* check for link */ | |
318a94d6 | 244 | switch (hw->phy.media_type) { |
bc7f75fa AK |
245 | case e1000_media_type_copper: |
246 | func->setup_physical_interface = e1000_setup_copper_link_82571; | |
247 | func->check_for_link = e1000e_check_for_copper_link; | |
248 | func->get_link_up_info = e1000e_get_speed_and_duplex_copper; | |
249 | break; | |
250 | case e1000_media_type_fiber: | |
ad68076e BA |
251 | func->setup_physical_interface = |
252 | e1000_setup_fiber_serdes_link_82571; | |
bc7f75fa | 253 | func->check_for_link = e1000e_check_for_fiber_link; |
ad68076e BA |
254 | func->get_link_up_info = |
255 | e1000e_get_speed_and_duplex_fiber_serdes; | |
bc7f75fa AK |
256 | break; |
257 | case e1000_media_type_internal_serdes: | |
ad68076e BA |
258 | func->setup_physical_interface = |
259 | e1000_setup_fiber_serdes_link_82571; | |
c9523379 | 260 | func->check_for_link = e1000_check_for_serdes_link_82571; |
ad68076e BA |
261 | func->get_link_up_info = |
262 | e1000e_get_speed_and_duplex_fiber_serdes; | |
bc7f75fa AK |
263 | break; |
264 | default: | |
265 | return -E1000_ERR_CONFIG; | |
266 | break; | |
267 | } | |
268 | ||
4662e82b | 269 | switch (hw->mac.type) { |
f4d2dd4c BA |
270 | case e1000_82573: |
271 | func->set_lan_id = e1000_set_lan_id_single_port; | |
272 | func->check_mng_mode = e1000e_check_mng_mode_generic; | |
273 | func->led_on = e1000e_led_on_generic; | |
274 | break; | |
4662e82b | 275 | case e1000_82574: |
8c81c9c3 | 276 | case e1000_82583: |
f4d2dd4c | 277 | func->set_lan_id = e1000_set_lan_id_single_port; |
4662e82b BA |
278 | func->check_mng_mode = e1000_check_mng_mode_82574; |
279 | func->led_on = e1000_led_on_82574; | |
280 | break; | |
281 | default: | |
282 | func->check_mng_mode = e1000e_check_mng_mode_generic; | |
283 | func->led_on = e1000e_led_on_generic; | |
284 | break; | |
285 | } | |
286 | ||
23a2d1b2 DG |
287 | /* |
288 | * Ensure that the inter-port SWSM.SMBI lock bit is clear before | |
289 | * first NVM or PHY acess. This should be done for single-port | |
290 | * devices, and for one port only on dual-port devices so that | |
291 | * for those devices we can still use the SMBI lock to synchronize | |
292 | * inter-port accesses to the PHY & NVM. | |
293 | */ | |
294 | switch (hw->mac.type) { | |
295 | case e1000_82571: | |
296 | case e1000_82572: | |
297 | swsm2 = er32(SWSM2); | |
298 | ||
299 | if (!(swsm2 & E1000_SWSM2_LOCK)) { | |
300 | /* Only do this for the first interface on this card */ | |
301 | ew32(SWSM2, | |
302 | swsm2 | E1000_SWSM2_LOCK); | |
303 | force_clear_smbi = true; | |
304 | } else | |
305 | force_clear_smbi = false; | |
306 | break; | |
307 | default: | |
308 | force_clear_smbi = true; | |
309 | break; | |
310 | } | |
311 | ||
312 | if (force_clear_smbi) { | |
313 | /* Make sure SWSM.SMBI is clear */ | |
314 | swsm = er32(SWSM); | |
315 | if (swsm & E1000_SWSM_SMBI) { | |
316 | /* This bit should not be set on a first interface, and | |
317 | * indicates that the bootagent or EFI code has | |
318 | * improperly left this bit enabled | |
319 | */ | |
3bb99fe2 | 320 | e_dbg("Please update your 82571 Bootagent\n"); |
23a2d1b2 DG |
321 | } |
322 | ew32(SWSM, swsm & ~E1000_SWSM_SMBI); | |
323 | } | |
324 | ||
325 | /* | |
326 | * Initialze device specific counter of SMBI acquisition | |
327 | * timeouts. | |
328 | */ | |
329 | hw->dev_spec.e82571.smb_counter = 0; | |
330 | ||
bc7f75fa AK |
331 | return 0; |
332 | } | |
333 | ||
69e3fd8c | 334 | static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) |
bc7f75fa AK |
335 | { |
336 | struct e1000_hw *hw = &adapter->hw; | |
337 | static int global_quad_port_a; /* global port a indication */ | |
338 | struct pci_dev *pdev = adapter->pdev; | |
bc7f75fa AK |
339 | int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1; |
340 | s32 rc; | |
341 | ||
342 | rc = e1000_init_mac_params_82571(adapter); | |
343 | if (rc) | |
344 | return rc; | |
345 | ||
346 | rc = e1000_init_nvm_params_82571(hw); | |
347 | if (rc) | |
348 | return rc; | |
349 | ||
350 | rc = e1000_init_phy_params_82571(hw); | |
351 | if (rc) | |
352 | return rc; | |
353 | ||
354 | /* tag quad port adapters first, it's used below */ | |
355 | switch (pdev->device) { | |
356 | case E1000_DEV_ID_82571EB_QUAD_COPPER: | |
357 | case E1000_DEV_ID_82571EB_QUAD_FIBER: | |
358 | case E1000_DEV_ID_82571EB_QUAD_COPPER_LP: | |
040babf9 | 359 | case E1000_DEV_ID_82571PT_QUAD_COPPER: |
bc7f75fa AK |
360 | adapter->flags |= FLAG_IS_QUAD_PORT; |
361 | /* mark the first port */ | |
362 | if (global_quad_port_a == 0) | |
363 | adapter->flags |= FLAG_IS_QUAD_PORT_A; | |
364 | /* Reset for multiple quad port adapters */ | |
365 | global_quad_port_a++; | |
366 | if (global_quad_port_a == 4) | |
367 | global_quad_port_a = 0; | |
368 | break; | |
369 | default: | |
370 | break; | |
371 | } | |
372 | ||
373 | switch (adapter->hw.mac.type) { | |
374 | case e1000_82571: | |
375 | /* these dual ports don't have WoL on port B at all */ | |
376 | if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) || | |
377 | (pdev->device == E1000_DEV_ID_82571EB_SERDES) || | |
378 | (pdev->device == E1000_DEV_ID_82571EB_COPPER)) && | |
379 | (is_port_b)) | |
380 | adapter->flags &= ~FLAG_HAS_WOL; | |
381 | /* quad ports only support WoL on port A */ | |
382 | if (adapter->flags & FLAG_IS_QUAD_PORT && | |
6e4ca80d | 383 | (!(adapter->flags & FLAG_IS_QUAD_PORT_A))) |
bc7f75fa | 384 | adapter->flags &= ~FLAG_HAS_WOL; |
040babf9 AK |
385 | /* Does not support WoL on any port */ |
386 | if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) | |
387 | adapter->flags &= ~FLAG_HAS_WOL; | |
bc7f75fa | 388 | break; |
bc7f75fa | 389 | case e1000_82573: |
6f461f6c BA |
390 | case e1000_82574: |
391 | case e1000_82583: | |
392 | /* Disable ASPM L0s due to hardware errata */ | |
393 | e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L0S); | |
394 | ||
bc7f75fa | 395 | if (pdev->device == E1000_DEV_ID_82573L) { |
6f461f6c BA |
396 | adapter->flags |= FLAG_HAS_JUMBO_FRAMES; |
397 | adapter->max_hw_frame_size = DEFAULT_JUMBO; | |
bc7f75fa AK |
398 | } |
399 | break; | |
400 | default: | |
401 | break; | |
402 | } | |
403 | ||
404 | return 0; | |
405 | } | |
406 | ||
407 | /** | |
408 | * e1000_get_phy_id_82571 - Retrieve the PHY ID and revision | |
409 | * @hw: pointer to the HW structure | |
410 | * | |
411 | * Reads the PHY registers and stores the PHY ID and possibly the PHY | |
412 | * revision in the hardware structure. | |
413 | **/ | |
414 | static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) | |
415 | { | |
416 | struct e1000_phy_info *phy = &hw->phy; | |
4662e82b BA |
417 | s32 ret_val; |
418 | u16 phy_id = 0; | |
bc7f75fa AK |
419 | |
420 | switch (hw->mac.type) { | |
421 | case e1000_82571: | |
422 | case e1000_82572: | |
ad68076e BA |
423 | /* |
424 | * The 82571 firmware may still be configuring the PHY. | |
bc7f75fa AK |
425 | * In this case, we cannot access the PHY until the |
426 | * configuration is done. So we explicitly set the | |
ad68076e BA |
427 | * PHY ID. |
428 | */ | |
bc7f75fa AK |
429 | phy->id = IGP01E1000_I_PHY_ID; |
430 | break; | |
431 | case e1000_82573: | |
432 | return e1000e_get_phy_id(hw); | |
433 | break; | |
4662e82b | 434 | case e1000_82574: |
8c81c9c3 | 435 | case e1000_82583: |
4662e82b BA |
436 | ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); |
437 | if (ret_val) | |
438 | return ret_val; | |
439 | ||
440 | phy->id = (u32)(phy_id << 16); | |
441 | udelay(20); | |
442 | ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); | |
443 | if (ret_val) | |
444 | return ret_val; | |
445 | ||
446 | phy->id |= (u32)(phy_id); | |
447 | phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); | |
448 | break; | |
bc7f75fa AK |
449 | default: |
450 | return -E1000_ERR_PHY; | |
451 | break; | |
452 | } | |
453 | ||
454 | return 0; | |
455 | } | |
456 | ||
457 | /** | |
458 | * e1000_get_hw_semaphore_82571 - Acquire hardware semaphore | |
459 | * @hw: pointer to the HW structure | |
460 | * | |
461 | * Acquire the HW semaphore to access the PHY or NVM | |
462 | **/ | |
463 | static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) | |
464 | { | |
465 | u32 swsm; | |
23a2d1b2 DG |
466 | s32 sw_timeout = hw->nvm.word_size + 1; |
467 | s32 fw_timeout = hw->nvm.word_size + 1; | |
bc7f75fa AK |
468 | s32 i = 0; |
469 | ||
23a2d1b2 DG |
470 | /* |
471 | * If we have timedout 3 times on trying to acquire | |
472 | * the inter-port SMBI semaphore, there is old code | |
473 | * operating on the other port, and it is not | |
474 | * releasing SMBI. Modify the number of times that | |
475 | * we try for the semaphore to interwork with this | |
476 | * older code. | |
477 | */ | |
478 | if (hw->dev_spec.e82571.smb_counter > 2) | |
479 | sw_timeout = 1; | |
480 | ||
481 | /* Get the SW semaphore */ | |
482 | while (i < sw_timeout) { | |
483 | swsm = er32(SWSM); | |
484 | if (!(swsm & E1000_SWSM_SMBI)) | |
485 | break; | |
486 | ||
487 | udelay(50); | |
488 | i++; | |
489 | } | |
490 | ||
491 | if (i == sw_timeout) { | |
3bb99fe2 | 492 | e_dbg("Driver can't access device - SMBI bit is set.\n"); |
23a2d1b2 DG |
493 | hw->dev_spec.e82571.smb_counter++; |
494 | } | |
bc7f75fa | 495 | /* Get the FW semaphore. */ |
23a2d1b2 | 496 | for (i = 0; i < fw_timeout; i++) { |
bc7f75fa AK |
497 | swsm = er32(SWSM); |
498 | ew32(SWSM, swsm | E1000_SWSM_SWESMBI); | |
499 | ||
500 | /* Semaphore acquired if bit latched */ | |
501 | if (er32(SWSM) & E1000_SWSM_SWESMBI) | |
502 | break; | |
503 | ||
504 | udelay(50); | |
505 | } | |
506 | ||
23a2d1b2 | 507 | if (i == fw_timeout) { |
bc7f75fa | 508 | /* Release semaphores */ |
23a2d1b2 | 509 | e1000_put_hw_semaphore_82571(hw); |
3bb99fe2 | 510 | e_dbg("Driver can't access the NVM\n"); |
bc7f75fa AK |
511 | return -E1000_ERR_NVM; |
512 | } | |
513 | ||
514 | return 0; | |
515 | } | |
516 | ||
517 | /** | |
518 | * e1000_put_hw_semaphore_82571 - Release hardware semaphore | |
519 | * @hw: pointer to the HW structure | |
520 | * | |
521 | * Release hardware semaphore used to access the PHY or NVM | |
522 | **/ | |
523 | static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw) | |
524 | { | |
525 | u32 swsm; | |
526 | ||
527 | swsm = er32(SWSM); | |
23a2d1b2 | 528 | swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); |
bc7f75fa AK |
529 | ew32(SWSM, swsm); |
530 | } | |
531 | ||
532 | /** | |
533 | * e1000_acquire_nvm_82571 - Request for access to the EEPROM | |
534 | * @hw: pointer to the HW structure | |
535 | * | |
536 | * To gain access to the EEPROM, first we must obtain a hardware semaphore. | |
537 | * Then for non-82573 hardware, set the EEPROM access request bit and wait | |
538 | * for EEPROM access grant bit. If the access grant bit is not set, release | |
539 | * hardware semaphore. | |
540 | **/ | |
541 | static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw) | |
542 | { | |
543 | s32 ret_val; | |
544 | ||
545 | ret_val = e1000_get_hw_semaphore_82571(hw); | |
546 | if (ret_val) | |
547 | return ret_val; | |
548 | ||
8c81c9c3 AD |
549 | switch (hw->mac.type) { |
550 | case e1000_82573: | |
551 | case e1000_82574: | |
552 | case e1000_82583: | |
553 | break; | |
554 | default: | |
bc7f75fa | 555 | ret_val = e1000e_acquire_nvm(hw); |
8c81c9c3 AD |
556 | break; |
557 | } | |
bc7f75fa AK |
558 | |
559 | if (ret_val) | |
560 | e1000_put_hw_semaphore_82571(hw); | |
561 | ||
562 | return ret_val; | |
563 | } | |
564 | ||
565 | /** | |
566 | * e1000_release_nvm_82571 - Release exclusive access to EEPROM | |
567 | * @hw: pointer to the HW structure | |
568 | * | |
569 | * Stop any current commands to the EEPROM and clear the EEPROM request bit. | |
570 | **/ | |
571 | static void e1000_release_nvm_82571(struct e1000_hw *hw) | |
572 | { | |
573 | e1000e_release_nvm(hw); | |
574 | e1000_put_hw_semaphore_82571(hw); | |
575 | } | |
576 | ||
577 | /** | |
578 | * e1000_write_nvm_82571 - Write to EEPROM using appropriate interface | |
579 | * @hw: pointer to the HW structure | |
580 | * @offset: offset within the EEPROM to be written to | |
581 | * @words: number of words to write | |
582 | * @data: 16 bit word(s) to be written to the EEPROM | |
583 | * | |
584 | * For non-82573 silicon, write data to EEPROM at offset using SPI interface. | |
585 | * | |
586 | * If e1000e_update_nvm_checksum is not called after this function, the | |
489815ce | 587 | * EEPROM will most likely contain an invalid checksum. |
bc7f75fa AK |
588 | **/ |
589 | static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, | |
590 | u16 *data) | |
591 | { | |
592 | s32 ret_val; | |
593 | ||
594 | switch (hw->mac.type) { | |
595 | case e1000_82573: | |
4662e82b | 596 | case e1000_82574: |
8c81c9c3 | 597 | case e1000_82583: |
bc7f75fa AK |
598 | ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data); |
599 | break; | |
600 | case e1000_82571: | |
601 | case e1000_82572: | |
602 | ret_val = e1000e_write_nvm_spi(hw, offset, words, data); | |
603 | break; | |
604 | default: | |
605 | ret_val = -E1000_ERR_NVM; | |
606 | break; | |
607 | } | |
608 | ||
609 | return ret_val; | |
610 | } | |
611 | ||
612 | /** | |
613 | * e1000_update_nvm_checksum_82571 - Update EEPROM checksum | |
614 | * @hw: pointer to the HW structure | |
615 | * | |
616 | * Updates the EEPROM checksum by reading/adding each word of the EEPROM | |
617 | * up to the checksum. Then calculates the EEPROM checksum and writes the | |
618 | * value to the EEPROM. | |
619 | **/ | |
620 | static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) | |
621 | { | |
622 | u32 eecd; | |
623 | s32 ret_val; | |
624 | u16 i; | |
625 | ||
626 | ret_val = e1000e_update_nvm_checksum_generic(hw); | |
627 | if (ret_val) | |
628 | return ret_val; | |
629 | ||
ad68076e BA |
630 | /* |
631 | * If our nvm is an EEPROM, then we're done | |
632 | * otherwise, commit the checksum to the flash NVM. | |
633 | */ | |
bc7f75fa AK |
634 | if (hw->nvm.type != e1000_nvm_flash_hw) |
635 | return ret_val; | |
636 | ||
637 | /* Check for pending operations. */ | |
638 | for (i = 0; i < E1000_FLASH_UPDATES; i++) { | |
639 | msleep(1); | |
640 | if ((er32(EECD) & E1000_EECD_FLUPD) == 0) | |
641 | break; | |
642 | } | |
643 | ||
644 | if (i == E1000_FLASH_UPDATES) | |
645 | return -E1000_ERR_NVM; | |
646 | ||
647 | /* Reset the firmware if using STM opcode. */ | |
648 | if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) { | |
ad68076e BA |
649 | /* |
650 | * The enabling of and the actual reset must be done | |
bc7f75fa AK |
651 | * in two write cycles. |
652 | */ | |
653 | ew32(HICR, E1000_HICR_FW_RESET_ENABLE); | |
654 | e1e_flush(); | |
655 | ew32(HICR, E1000_HICR_FW_RESET); | |
656 | } | |
657 | ||
658 | /* Commit the write to flash */ | |
659 | eecd = er32(EECD) | E1000_EECD_FLUPD; | |
660 | ew32(EECD, eecd); | |
661 | ||
662 | for (i = 0; i < E1000_FLASH_UPDATES; i++) { | |
663 | msleep(1); | |
664 | if ((er32(EECD) & E1000_EECD_FLUPD) == 0) | |
665 | break; | |
666 | } | |
667 | ||
668 | if (i == E1000_FLASH_UPDATES) | |
669 | return -E1000_ERR_NVM; | |
670 | ||
671 | return 0; | |
672 | } | |
673 | ||
674 | /** | |
675 | * e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum | |
676 | * @hw: pointer to the HW structure | |
677 | * | |
678 | * Calculates the EEPROM checksum by reading/adding each word of the EEPROM | |
679 | * and then verifies that the sum of the EEPROM is equal to 0xBABA. | |
680 | **/ | |
681 | static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw) | |
682 | { | |
683 | if (hw->nvm.type == e1000_nvm_flash_hw) | |
684 | e1000_fix_nvm_checksum_82571(hw); | |
685 | ||
686 | return e1000e_validate_nvm_checksum_generic(hw); | |
687 | } | |
688 | ||
689 | /** | |
690 | * e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon | |
691 | * @hw: pointer to the HW structure | |
692 | * @offset: offset within the EEPROM to be written to | |
693 | * @words: number of words to write | |
694 | * @data: 16 bit word(s) to be written to the EEPROM | |
695 | * | |
696 | * After checking for invalid values, poll the EEPROM to ensure the previous | |
697 | * command has completed before trying to write the next word. After write | |
698 | * poll for completion. | |
699 | * | |
700 | * If e1000e_update_nvm_checksum is not called after this function, the | |
489815ce | 701 | * EEPROM will most likely contain an invalid checksum. |
bc7f75fa AK |
702 | **/ |
703 | static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, | |
704 | u16 words, u16 *data) | |
705 | { | |
706 | struct e1000_nvm_info *nvm = &hw->nvm; | |
a708dd88 | 707 | u32 i, eewr = 0; |
bc7f75fa AK |
708 | s32 ret_val = 0; |
709 | ||
ad68076e BA |
710 | /* |
711 | * A check for invalid values: offset too large, too many words, | |
712 | * and not enough words. | |
713 | */ | |
bc7f75fa AK |
714 | if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || |
715 | (words == 0)) { | |
3bb99fe2 | 716 | e_dbg("nvm parameter(s) out of bounds\n"); |
bc7f75fa AK |
717 | return -E1000_ERR_NVM; |
718 | } | |
719 | ||
720 | for (i = 0; i < words; i++) { | |
721 | eewr = (data[i] << E1000_NVM_RW_REG_DATA) | | |
722 | ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) | | |
723 | E1000_NVM_RW_REG_START; | |
724 | ||
725 | ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE); | |
726 | if (ret_val) | |
727 | break; | |
728 | ||
729 | ew32(EEWR, eewr); | |
730 | ||
731 | ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE); | |
732 | if (ret_val) | |
733 | break; | |
734 | } | |
735 | ||
736 | return ret_val; | |
737 | } | |
738 | ||
739 | /** | |
740 | * e1000_get_cfg_done_82571 - Poll for configuration done | |
741 | * @hw: pointer to the HW structure | |
742 | * | |
743 | * Reads the management control register for the config done bit to be set. | |
744 | **/ | |
745 | static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) | |
746 | { | |
747 | s32 timeout = PHY_CFG_TIMEOUT; | |
748 | ||
749 | while (timeout) { | |
750 | if (er32(EEMNGCTL) & | |
751 | E1000_NVM_CFG_DONE_PORT_0) | |
752 | break; | |
753 | msleep(1); | |
754 | timeout--; | |
755 | } | |
756 | if (!timeout) { | |
3bb99fe2 | 757 | e_dbg("MNG configuration cycle has not completed.\n"); |
bc7f75fa AK |
758 | return -E1000_ERR_RESET; |
759 | } | |
760 | ||
761 | return 0; | |
762 | } | |
763 | ||
764 | /** | |
765 | * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state | |
766 | * @hw: pointer to the HW structure | |
564ea9bb | 767 | * @active: true to enable LPLU, false to disable |
bc7f75fa AK |
768 | * |
769 | * Sets the LPLU D0 state according to the active flag. When activating LPLU | |
770 | * this function also disables smart speed and vice versa. LPLU will not be | |
771 | * activated unless the device autonegotiation advertisement meets standards | |
772 | * of either 10 or 10/100 or 10/100/1000 at all duplexes. This is a function | |
773 | * pointer entry point only called by PHY setup routines. | |
774 | **/ | |
775 | static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) | |
776 | { | |
777 | struct e1000_phy_info *phy = &hw->phy; | |
778 | s32 ret_val; | |
779 | u16 data; | |
780 | ||
781 | ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data); | |
782 | if (ret_val) | |
783 | return ret_val; | |
784 | ||
785 | if (active) { | |
786 | data |= IGP02E1000_PM_D0_LPLU; | |
787 | ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); | |
788 | if (ret_val) | |
789 | return ret_val; | |
790 | ||
791 | /* When LPLU is enabled, we should disable SmartSpeed */ | |
792 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); | |
793 | data &= ~IGP01E1000_PSCFR_SMART_SPEED; | |
794 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); | |
795 | if (ret_val) | |
796 | return ret_val; | |
797 | } else { | |
798 | data &= ~IGP02E1000_PM_D0_LPLU; | |
799 | ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); | |
ad68076e BA |
800 | /* |
801 | * LPLU and SmartSpeed are mutually exclusive. LPLU is used | |
bc7f75fa AK |
802 | * during Dx states where the power conservation is most |
803 | * important. During driver activity we should enable | |
ad68076e BA |
804 | * SmartSpeed, so performance is maintained. |
805 | */ | |
bc7f75fa AK |
806 | if (phy->smart_speed == e1000_smart_speed_on) { |
807 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
ad68076e | 808 | &data); |
bc7f75fa AK |
809 | if (ret_val) |
810 | return ret_val; | |
811 | ||
812 | data |= IGP01E1000_PSCFR_SMART_SPEED; | |
813 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
ad68076e | 814 | data); |
bc7f75fa AK |
815 | if (ret_val) |
816 | return ret_val; | |
817 | } else if (phy->smart_speed == e1000_smart_speed_off) { | |
818 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
ad68076e | 819 | &data); |
bc7f75fa AK |
820 | if (ret_val) |
821 | return ret_val; | |
822 | ||
823 | data &= ~IGP01E1000_PSCFR_SMART_SPEED; | |
824 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
ad68076e | 825 | data); |
bc7f75fa AK |
826 | if (ret_val) |
827 | return ret_val; | |
828 | } | |
829 | } | |
830 | ||
831 | return 0; | |
832 | } | |
833 | ||
834 | /** | |
835 | * e1000_reset_hw_82571 - Reset hardware | |
836 | * @hw: pointer to the HW structure | |
837 | * | |
fe401674 | 838 | * This resets the hardware into a known state. |
bc7f75fa AK |
839 | **/ |
840 | static s32 e1000_reset_hw_82571(struct e1000_hw *hw) | |
841 | { | |
a708dd88 | 842 | u32 ctrl, extcnf_ctrl, ctrl_ext, icr; |
bc7f75fa AK |
843 | s32 ret_val; |
844 | u16 i = 0; | |
845 | ||
ad68076e BA |
846 | /* |
847 | * Prevent the PCI-E bus from sticking if there is no TLP connection | |
bc7f75fa AK |
848 | * on the last TLP read/write transaction when MAC is reset. |
849 | */ | |
850 | ret_val = e1000e_disable_pcie_master(hw); | |
851 | if (ret_val) | |
3bb99fe2 | 852 | e_dbg("PCI-E Master disable polling has failed.\n"); |
bc7f75fa | 853 | |
3bb99fe2 | 854 | e_dbg("Masking off all interrupts\n"); |
bc7f75fa AK |
855 | ew32(IMC, 0xffffffff); |
856 | ||
857 | ew32(RCTL, 0); | |
858 | ew32(TCTL, E1000_TCTL_PSP); | |
859 | e1e_flush(); | |
860 | ||
861 | msleep(10); | |
862 | ||
ad68076e BA |
863 | /* |
864 | * Must acquire the MDIO ownership before MAC reset. | |
865 | * Ownership defaults to firmware after a reset. | |
866 | */ | |
8c81c9c3 AD |
867 | switch (hw->mac.type) { |
868 | case e1000_82573: | |
869 | case e1000_82574: | |
870 | case e1000_82583: | |
bc7f75fa AK |
871 | extcnf_ctrl = er32(EXTCNF_CTRL); |
872 | extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; | |
873 | ||
874 | do { | |
875 | ew32(EXTCNF_CTRL, extcnf_ctrl); | |
876 | extcnf_ctrl = er32(EXTCNF_CTRL); | |
877 | ||
878 | if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) | |
879 | break; | |
880 | ||
881 | extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; | |
882 | ||
883 | msleep(2); | |
884 | i++; | |
885 | } while (i < MDIO_OWNERSHIP_TIMEOUT); | |
8c81c9c3 AD |
886 | break; |
887 | default: | |
888 | break; | |
bc7f75fa AK |
889 | } |
890 | ||
891 | ctrl = er32(CTRL); | |
892 | ||
3bb99fe2 | 893 | e_dbg("Issuing a global reset to MAC\n"); |
bc7f75fa AK |
894 | ew32(CTRL, ctrl | E1000_CTRL_RST); |
895 | ||
896 | if (hw->nvm.type == e1000_nvm_flash_hw) { | |
897 | udelay(10); | |
898 | ctrl_ext = er32(CTRL_EXT); | |
899 | ctrl_ext |= E1000_CTRL_EXT_EE_RST; | |
900 | ew32(CTRL_EXT, ctrl_ext); | |
901 | e1e_flush(); | |
902 | } | |
903 | ||
904 | ret_val = e1000e_get_auto_rd_done(hw); | |
905 | if (ret_val) | |
906 | /* We don't want to continue accessing MAC registers. */ | |
907 | return ret_val; | |
908 | ||
ad68076e BA |
909 | /* |
910 | * Phy configuration from NVM just starts after EECD_AUTO_RD is set. | |
bc7f75fa AK |
911 | * Need to wait for Phy configuration completion before accessing |
912 | * NVM and Phy. | |
913 | */ | |
8c81c9c3 AD |
914 | |
915 | switch (hw->mac.type) { | |
916 | case e1000_82573: | |
917 | case e1000_82574: | |
918 | case e1000_82583: | |
bc7f75fa | 919 | msleep(25); |
8c81c9c3 AD |
920 | break; |
921 | default: | |
922 | break; | |
923 | } | |
bc7f75fa AK |
924 | |
925 | /* Clear any pending interrupt events. */ | |
926 | ew32(IMC, 0xffffffff); | |
927 | icr = er32(ICR); | |
928 | ||
608f8a0d BA |
929 | /* Install any alternate MAC address into RAR0 */ |
930 | ret_val = e1000_check_alt_mac_addr_generic(hw); | |
931 | if (ret_val) | |
932 | return ret_val; | |
933 | ||
934 | e1000e_set_laa_state_82571(hw, true); | |
93ca1610 | 935 | |
c9523379 | 936 | /* Reinitialize the 82571 serdes link state machine */ |
937 | if (hw->phy.media_type == e1000_media_type_internal_serdes) | |
938 | hw->mac.serdes_link_state = e1000_serdes_link_down; | |
939 | ||
bc7f75fa AK |
940 | return 0; |
941 | } | |
942 | ||
943 | /** | |
944 | * e1000_init_hw_82571 - Initialize hardware | |
945 | * @hw: pointer to the HW structure | |
946 | * | |
947 | * This inits the hardware readying it for operation. | |
948 | **/ | |
949 | static s32 e1000_init_hw_82571(struct e1000_hw *hw) | |
950 | { | |
951 | struct e1000_mac_info *mac = &hw->mac; | |
952 | u32 reg_data; | |
953 | s32 ret_val; | |
a708dd88 | 954 | u16 i, rar_count = mac->rar_entry_count; |
bc7f75fa AK |
955 | |
956 | e1000_initialize_hw_bits_82571(hw); | |
957 | ||
958 | /* Initialize identification LED */ | |
959 | ret_val = e1000e_id_led_init(hw); | |
de39b752 | 960 | if (ret_val) |
3bb99fe2 | 961 | e_dbg("Error initializing identification LED\n"); |
de39b752 | 962 | /* This is not fatal and we should not stop init due to this */ |
bc7f75fa AK |
963 | |
964 | /* Disabling VLAN filtering */ | |
3bb99fe2 | 965 | e_dbg("Initializing the IEEE VLAN\n"); |
caaddaf8 | 966 | mac->ops.clear_vfta(hw); |
bc7f75fa AK |
967 | |
968 | /* Setup the receive address. */ | |
ad68076e BA |
969 | /* |
970 | * If, however, a locally administered address was assigned to the | |
bc7f75fa AK |
971 | * 82571, we must reserve a RAR for it to work around an issue where |
972 | * resetting one port will reload the MAC on the other port. | |
973 | */ | |
974 | if (e1000e_get_laa_state_82571(hw)) | |
975 | rar_count--; | |
976 | e1000e_init_rx_addrs(hw, rar_count); | |
977 | ||
978 | /* Zero out the Multicast HASH table */ | |
3bb99fe2 | 979 | e_dbg("Zeroing the MTA\n"); |
bc7f75fa AK |
980 | for (i = 0; i < mac->mta_reg_count; i++) |
981 | E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); | |
982 | ||
983 | /* Setup link and flow control */ | |
984 | ret_val = e1000_setup_link_82571(hw); | |
985 | ||
986 | /* Set the transmit descriptor write-back policy */ | |
e9ec2c0f | 987 | reg_data = er32(TXDCTL(0)); |
bc7f75fa AK |
988 | reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | |
989 | E1000_TXDCTL_FULL_TX_DESC_WB | | |
990 | E1000_TXDCTL_COUNT_DESC; | |
e9ec2c0f | 991 | ew32(TXDCTL(0), reg_data); |
bc7f75fa AK |
992 | |
993 | /* ...for both queues. */ | |
8c81c9c3 AD |
994 | switch (mac->type) { |
995 | case e1000_82573: | |
996 | case e1000_82574: | |
997 | case e1000_82583: | |
998 | e1000e_enable_tx_pkt_filtering(hw); | |
999 | reg_data = er32(GCR); | |
1000 | reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; | |
1001 | ew32(GCR, reg_data); | |
1002 | break; | |
1003 | default: | |
e9ec2c0f | 1004 | reg_data = er32(TXDCTL(1)); |
bc7f75fa AK |
1005 | reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | |
1006 | E1000_TXDCTL_FULL_TX_DESC_WB | | |
1007 | E1000_TXDCTL_COUNT_DESC; | |
e9ec2c0f | 1008 | ew32(TXDCTL(1), reg_data); |
8c81c9c3 | 1009 | break; |
bc7f75fa AK |
1010 | } |
1011 | ||
ad68076e BA |
1012 | /* |
1013 | * Clear all of the statistics registers (clear on read). It is | |
bc7f75fa AK |
1014 | * important that we do this after we have tried to establish link |
1015 | * because the symbol error count will increment wildly if there | |
1016 | * is no link. | |
1017 | */ | |
1018 | e1000_clear_hw_cntrs_82571(hw); | |
1019 | ||
1020 | return ret_val; | |
1021 | } | |
1022 | ||
1023 | /** | |
1024 | * e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits | |
1025 | * @hw: pointer to the HW structure | |
1026 | * | |
1027 | * Initializes required hardware-dependent bits needed for normal operation. | |
1028 | **/ | |
1029 | static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) | |
1030 | { | |
1031 | u32 reg; | |
1032 | ||
1033 | /* Transmit Descriptor Control 0 */ | |
e9ec2c0f | 1034 | reg = er32(TXDCTL(0)); |
bc7f75fa | 1035 | reg |= (1 << 22); |
e9ec2c0f | 1036 | ew32(TXDCTL(0), reg); |
bc7f75fa AK |
1037 | |
1038 | /* Transmit Descriptor Control 1 */ | |
e9ec2c0f | 1039 | reg = er32(TXDCTL(1)); |
bc7f75fa | 1040 | reg |= (1 << 22); |
e9ec2c0f | 1041 | ew32(TXDCTL(1), reg); |
bc7f75fa AK |
1042 | |
1043 | /* Transmit Arbitration Control 0 */ | |
e9ec2c0f | 1044 | reg = er32(TARC(0)); |
bc7f75fa AK |
1045 | reg &= ~(0xF << 27); /* 30:27 */ |
1046 | switch (hw->mac.type) { | |
1047 | case e1000_82571: | |
1048 | case e1000_82572: | |
1049 | reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26); | |
1050 | break; | |
1051 | default: | |
1052 | break; | |
1053 | } | |
e9ec2c0f | 1054 | ew32(TARC(0), reg); |
bc7f75fa AK |
1055 | |
1056 | /* Transmit Arbitration Control 1 */ | |
e9ec2c0f | 1057 | reg = er32(TARC(1)); |
bc7f75fa AK |
1058 | switch (hw->mac.type) { |
1059 | case e1000_82571: | |
1060 | case e1000_82572: | |
1061 | reg &= ~((1 << 29) | (1 << 30)); | |
1062 | reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26); | |
1063 | if (er32(TCTL) & E1000_TCTL_MULR) | |
1064 | reg &= ~(1 << 28); | |
1065 | else | |
1066 | reg |= (1 << 28); | |
e9ec2c0f | 1067 | ew32(TARC(1), reg); |
bc7f75fa AK |
1068 | break; |
1069 | default: | |
1070 | break; | |
1071 | } | |
1072 | ||
1073 | /* Device Control */ | |
8c81c9c3 AD |
1074 | switch (hw->mac.type) { |
1075 | case e1000_82573: | |
1076 | case e1000_82574: | |
1077 | case e1000_82583: | |
bc7f75fa AK |
1078 | reg = er32(CTRL); |
1079 | reg &= ~(1 << 29); | |
1080 | ew32(CTRL, reg); | |
8c81c9c3 AD |
1081 | break; |
1082 | default: | |
1083 | break; | |
bc7f75fa AK |
1084 | } |
1085 | ||
1086 | /* Extended Device Control */ | |
8c81c9c3 AD |
1087 | switch (hw->mac.type) { |
1088 | case e1000_82573: | |
1089 | case e1000_82574: | |
1090 | case e1000_82583: | |
bc7f75fa AK |
1091 | reg = er32(CTRL_EXT); |
1092 | reg &= ~(1 << 23); | |
1093 | reg |= (1 << 22); | |
1094 | ew32(CTRL_EXT, reg); | |
8c81c9c3 AD |
1095 | break; |
1096 | default: | |
1097 | break; | |
bc7f75fa | 1098 | } |
4662e82b | 1099 | |
6ea7ae1d AD |
1100 | if (hw->mac.type == e1000_82571) { |
1101 | reg = er32(PBA_ECC); | |
1102 | reg |= E1000_PBA_ECC_CORR_EN; | |
1103 | ew32(PBA_ECC, reg); | |
1104 | } | |
5df3f0ea | 1105 | /* |
1106 | * Workaround for hardware errata. | |
1107 | * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572 | |
1108 | */ | |
1109 | ||
1110 | if ((hw->mac.type == e1000_82571) || | |
1111 | (hw->mac.type == e1000_82572)) { | |
1112 | reg = er32(CTRL_EXT); | |
1113 | reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN; | |
1114 | ew32(CTRL_EXT, reg); | |
1115 | } | |
1116 | ||
6ea7ae1d | 1117 | |
78272bba | 1118 | /* PCI-Ex Control Registers */ |
8c81c9c3 AD |
1119 | switch (hw->mac.type) { |
1120 | case e1000_82574: | |
1121 | case e1000_82583: | |
4662e82b BA |
1122 | reg = er32(GCR); |
1123 | reg |= (1 << 22); | |
1124 | ew32(GCR, reg); | |
78272bba | 1125 | |
84efb7b9 BA |
1126 | /* |
1127 | * Workaround for hardware errata. | |
1128 | * apply workaround for hardware errata documented in errata | |
1129 | * docs Fixes issue where some error prone or unreliable PCIe | |
1130 | * completions are occurring, particularly with ASPM enabled. | |
1131 | * Without fix, issue can cause tx timeouts. | |
1132 | */ | |
78272bba JB |
1133 | reg = er32(GCR2); |
1134 | reg |= 1; | |
1135 | ew32(GCR2, reg); | |
8c81c9c3 AD |
1136 | break; |
1137 | default: | |
1138 | break; | |
4662e82b BA |
1139 | } |
1140 | ||
1141 | return; | |
bc7f75fa AK |
1142 | } |
1143 | ||
1144 | /** | |
caaddaf8 | 1145 | * e1000_clear_vfta_82571 - Clear VLAN filter table |
bc7f75fa AK |
1146 | * @hw: pointer to the HW structure |
1147 | * | |
1148 | * Clears the register array which contains the VLAN filter table by | |
1149 | * setting all the values to 0. | |
1150 | **/ | |
caaddaf8 | 1151 | static void e1000_clear_vfta_82571(struct e1000_hw *hw) |
bc7f75fa AK |
1152 | { |
1153 | u32 offset; | |
1154 | u32 vfta_value = 0; | |
1155 | u32 vfta_offset = 0; | |
1156 | u32 vfta_bit_in_reg = 0; | |
1157 | ||
8c81c9c3 AD |
1158 | switch (hw->mac.type) { |
1159 | case e1000_82573: | |
1160 | case e1000_82574: | |
1161 | case e1000_82583: | |
bc7f75fa | 1162 | if (hw->mng_cookie.vlan_id != 0) { |
ad68076e BA |
1163 | /* |
1164 | * The VFTA is a 4096b bit-field, each identifying | |
bc7f75fa AK |
1165 | * a single VLAN ID. The following operations |
1166 | * determine which 32b entry (i.e. offset) into the | |
1167 | * array we want to set the VLAN ID (i.e. bit) of | |
1168 | * the manageability unit. | |
1169 | */ | |
1170 | vfta_offset = (hw->mng_cookie.vlan_id >> | |
1171 | E1000_VFTA_ENTRY_SHIFT) & | |
1172 | E1000_VFTA_ENTRY_MASK; | |
1173 | vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & | |
1174 | E1000_VFTA_ENTRY_BIT_SHIFT_MASK); | |
1175 | } | |
8c81c9c3 AD |
1176 | break; |
1177 | default: | |
1178 | break; | |
bc7f75fa AK |
1179 | } |
1180 | for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { | |
ad68076e BA |
1181 | /* |
1182 | * If the offset we want to clear is the same offset of the | |
bc7f75fa AK |
1183 | * manageability VLAN ID, then clear all bits except that of |
1184 | * the manageability unit. | |
1185 | */ | |
1186 | vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; | |
1187 | E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value); | |
1188 | e1e_flush(); | |
1189 | } | |
1190 | } | |
1191 | ||
4662e82b BA |
1192 | /** |
1193 | * e1000_check_mng_mode_82574 - Check manageability is enabled | |
1194 | * @hw: pointer to the HW structure | |
1195 | * | |
1196 | * Reads the NVM Initialization Control Word 2 and returns true | |
1197 | * (>0) if any manageability is enabled, else false (0). | |
1198 | **/ | |
1199 | static bool e1000_check_mng_mode_82574(struct e1000_hw *hw) | |
1200 | { | |
1201 | u16 data; | |
1202 | ||
1203 | e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data); | |
1204 | return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0; | |
1205 | } | |
1206 | ||
1207 | /** | |
1208 | * e1000_led_on_82574 - Turn LED on | |
1209 | * @hw: pointer to the HW structure | |
1210 | * | |
1211 | * Turn LED on. | |
1212 | **/ | |
1213 | static s32 e1000_led_on_82574(struct e1000_hw *hw) | |
1214 | { | |
1215 | u32 ctrl; | |
1216 | u32 i; | |
1217 | ||
1218 | ctrl = hw->mac.ledctl_mode2; | |
1219 | if (!(E1000_STATUS_LU & er32(STATUS))) { | |
1220 | /* | |
1221 | * If no link, then turn LED on by setting the invert bit | |
1222 | * for each LED that's "on" (0x0E) in ledctl_mode2. | |
1223 | */ | |
1224 | for (i = 0; i < 4; i++) | |
1225 | if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == | |
1226 | E1000_LEDCTL_MODE_LED_ON) | |
1227 | ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8)); | |
1228 | } | |
1229 | ew32(LEDCTL, ctrl); | |
1230 | ||
1231 | return 0; | |
1232 | } | |
1233 | ||
bc7f75fa AK |
1234 | /** |
1235 | * e1000_setup_link_82571 - Setup flow control and link settings | |
1236 | * @hw: pointer to the HW structure | |
1237 | * | |
1238 | * Determines which flow control settings to use, then configures flow | |
1239 | * control. Calls the appropriate media-specific link configuration | |
1240 | * function. Assuming the adapter has a valid link partner, a valid link | |
1241 | * should be established. Assumes the hardware has previously been reset | |
1242 | * and the transmitter and receiver are not enabled. | |
1243 | **/ | |
1244 | static s32 e1000_setup_link_82571(struct e1000_hw *hw) | |
1245 | { | |
ad68076e BA |
1246 | /* |
1247 | * 82573 does not have a word in the NVM to determine | |
bc7f75fa AK |
1248 | * the default flow control setting, so we explicitly |
1249 | * set it to full. | |
1250 | */ | |
8c81c9c3 AD |
1251 | switch (hw->mac.type) { |
1252 | case e1000_82573: | |
1253 | case e1000_82574: | |
1254 | case e1000_82583: | |
1255 | if (hw->fc.requested_mode == e1000_fc_default) | |
1256 | hw->fc.requested_mode = e1000_fc_full; | |
1257 | break; | |
1258 | default: | |
1259 | break; | |
1260 | } | |
bc7f75fa AK |
1261 | |
1262 | return e1000e_setup_link(hw); | |
1263 | } | |
1264 | ||
1265 | /** | |
1266 | * e1000_setup_copper_link_82571 - Configure copper link settings | |
1267 | * @hw: pointer to the HW structure | |
1268 | * | |
1269 | * Configures the link for auto-neg or forced speed and duplex. Then we check | |
1270 | * for link, once link is established calls to configure collision distance | |
1271 | * and flow control are called. | |
1272 | **/ | |
1273 | static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) | |
1274 | { | |
1275 | u32 ctrl; | |
bc7f75fa AK |
1276 | s32 ret_val; |
1277 | ||
1278 | ctrl = er32(CTRL); | |
1279 | ctrl |= E1000_CTRL_SLU; | |
1280 | ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); | |
1281 | ew32(CTRL, ctrl); | |
1282 | ||
1283 | switch (hw->phy.type) { | |
1284 | case e1000_phy_m88: | |
4662e82b | 1285 | case e1000_phy_bm: |
bc7f75fa AK |
1286 | ret_val = e1000e_copper_link_setup_m88(hw); |
1287 | break; | |
1288 | case e1000_phy_igp_2: | |
1289 | ret_val = e1000e_copper_link_setup_igp(hw); | |
bc7f75fa AK |
1290 | break; |
1291 | default: | |
1292 | return -E1000_ERR_PHY; | |
1293 | break; | |
1294 | } | |
1295 | ||
1296 | if (ret_val) | |
1297 | return ret_val; | |
1298 | ||
1299 | ret_val = e1000e_setup_copper_link(hw); | |
1300 | ||
1301 | return ret_val; | |
1302 | } | |
1303 | ||
1304 | /** | |
1305 | * e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes | |
1306 | * @hw: pointer to the HW structure | |
1307 | * | |
1308 | * Configures collision distance and flow control for fiber and serdes links. | |
1309 | * Upon successful setup, poll for link. | |
1310 | **/ | |
1311 | static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) | |
1312 | { | |
1313 | switch (hw->mac.type) { | |
1314 | case e1000_82571: | |
1315 | case e1000_82572: | |
ad68076e BA |
1316 | /* |
1317 | * If SerDes loopback mode is entered, there is no form | |
bc7f75fa AK |
1318 | * of reset to take the adapter out of that mode. So we |
1319 | * have to explicitly take the adapter out of loopback | |
489815ce | 1320 | * mode. This prevents drivers from twiddling their thumbs |
bc7f75fa AK |
1321 | * if another tool failed to take it out of loopback mode. |
1322 | */ | |
ad68076e | 1323 | ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); |
bc7f75fa AK |
1324 | break; |
1325 | default: | |
1326 | break; | |
1327 | } | |
1328 | ||
1329 | return e1000e_setup_fiber_serdes_link(hw); | |
1330 | } | |
1331 | ||
c9523379 | 1332 | /** |
1333 | * e1000_check_for_serdes_link_82571 - Check for link (Serdes) | |
1334 | * @hw: pointer to the HW structure | |
1335 | * | |
1a40d5c1 BA |
1336 | * Reports the link state as up or down. |
1337 | * | |
1338 | * If autonegotiation is supported by the link partner, the link state is | |
1339 | * determined by the result of autonegotiation. This is the most likely case. | |
1340 | * If autonegotiation is not supported by the link partner, and the link | |
1341 | * has a valid signal, force the link up. | |
1342 | * | |
1343 | * The link state is represented internally here by 4 states: | |
1344 | * | |
1345 | * 1) down | |
1346 | * 2) autoneg_progress | |
3ad2f3fb | 1347 | * 3) autoneg_complete (the link successfully autonegotiated) |
1a40d5c1 BA |
1348 | * 4) forced_up (the link has been forced up, it did not autonegotiate) |
1349 | * | |
c9523379 | 1350 | **/ |
f6370117 | 1351 | static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) |
c9523379 | 1352 | { |
1353 | struct e1000_mac_info *mac = &hw->mac; | |
1354 | u32 rxcw; | |
1355 | u32 ctrl; | |
1356 | u32 status; | |
1357 | s32 ret_val = 0; | |
1358 | ||
1359 | ctrl = er32(CTRL); | |
1360 | status = er32(STATUS); | |
1361 | rxcw = er32(RXCW); | |
1362 | ||
1363 | if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { | |
1364 | ||
1365 | /* Receiver is synchronized with no invalid bits. */ | |
1366 | switch (mac->serdes_link_state) { | |
1367 | case e1000_serdes_link_autoneg_complete: | |
1368 | if (!(status & E1000_STATUS_LU)) { | |
1369 | /* | |
1370 | * We have lost link, retry autoneg before | |
1371 | * reporting link failure | |
1372 | */ | |
1373 | mac->serdes_link_state = | |
1374 | e1000_serdes_link_autoneg_progress; | |
1a40d5c1 | 1375 | mac->serdes_has_link = false; |
3bb99fe2 | 1376 | e_dbg("AN_UP -> AN_PROG\n"); |
c9523379 | 1377 | } |
1378 | break; | |
1379 | ||
1380 | case e1000_serdes_link_forced_up: | |
1381 | /* | |
1382 | * If we are receiving /C/ ordered sets, re-enable | |
1383 | * auto-negotiation in the TXCW register and disable | |
1384 | * forced link in the Device Control register in an | |
1385 | * attempt to auto-negotiate with our link partner. | |
1386 | */ | |
1387 | if (rxcw & E1000_RXCW_C) { | |
1388 | /* Enable autoneg, and unforce link up */ | |
1389 | ew32(TXCW, mac->txcw); | |
1a40d5c1 | 1390 | ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); |
c9523379 | 1391 | mac->serdes_link_state = |
1392 | e1000_serdes_link_autoneg_progress; | |
1a40d5c1 | 1393 | mac->serdes_has_link = false; |
3bb99fe2 | 1394 | e_dbg("FORCED_UP -> AN_PROG\n"); |
c9523379 | 1395 | } |
1396 | break; | |
1397 | ||
1398 | case e1000_serdes_link_autoneg_progress: | |
1a40d5c1 BA |
1399 | if (rxcw & E1000_RXCW_C) { |
1400 | /* | |
1401 | * We received /C/ ordered sets, meaning the | |
1402 | * link partner has autonegotiated, and we can | |
1403 | * trust the Link Up (LU) status bit. | |
1404 | */ | |
1405 | if (status & E1000_STATUS_LU) { | |
1406 | mac->serdes_link_state = | |
1407 | e1000_serdes_link_autoneg_complete; | |
1408 | e_dbg("AN_PROG -> AN_UP\n"); | |
1409 | mac->serdes_has_link = true; | |
1410 | } else { | |
1411 | /* Autoneg completed, but failed. */ | |
1412 | mac->serdes_link_state = | |
1413 | e1000_serdes_link_down; | |
1414 | e_dbg("AN_PROG -> DOWN\n"); | |
1415 | } | |
c9523379 | 1416 | } else { |
1417 | /* | |
1a40d5c1 BA |
1418 | * The link partner did not autoneg. |
1419 | * Force link up and full duplex, and change | |
1420 | * state to forced. | |
c9523379 | 1421 | */ |
1a40d5c1 | 1422 | ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); |
c9523379 | 1423 | ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); |
1424 | ew32(CTRL, ctrl); | |
1425 | ||
1426 | /* Configure Flow Control after link up. */ | |
1a40d5c1 | 1427 | ret_val = e1000e_config_fc_after_link_up(hw); |
c9523379 | 1428 | if (ret_val) { |
3bb99fe2 | 1429 | e_dbg("Error config flow control\n"); |
c9523379 | 1430 | break; |
1431 | } | |
1432 | mac->serdes_link_state = | |
1433 | e1000_serdes_link_forced_up; | |
1a40d5c1 | 1434 | mac->serdes_has_link = true; |
3bb99fe2 | 1435 | e_dbg("AN_PROG -> FORCED_UP\n"); |
c9523379 | 1436 | } |
c9523379 | 1437 | break; |
1438 | ||
1439 | case e1000_serdes_link_down: | |
1440 | default: | |
1a40d5c1 BA |
1441 | /* |
1442 | * The link was down but the receiver has now gained | |
c9523379 | 1443 | * valid sync, so lets see if we can bring the link |
1a40d5c1 BA |
1444 | * up. |
1445 | */ | |
c9523379 | 1446 | ew32(TXCW, mac->txcw); |
1a40d5c1 | 1447 | ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); |
c9523379 | 1448 | mac->serdes_link_state = |
1449 | e1000_serdes_link_autoneg_progress; | |
3bb99fe2 | 1450 | e_dbg("DOWN -> AN_PROG\n"); |
c9523379 | 1451 | break; |
1452 | } | |
1453 | } else { | |
1454 | if (!(rxcw & E1000_RXCW_SYNCH)) { | |
1455 | mac->serdes_has_link = false; | |
1456 | mac->serdes_link_state = e1000_serdes_link_down; | |
3bb99fe2 | 1457 | e_dbg("ANYSTATE -> DOWN\n"); |
c9523379 | 1458 | } else { |
1459 | /* | |
1a40d5c1 BA |
1460 | * We have sync, and can tolerate one invalid (IV) |
1461 | * codeword before declaring link down, so reread | |
1462 | * to look again. | |
c9523379 | 1463 | */ |
1464 | udelay(10); | |
1465 | rxcw = er32(RXCW); | |
1466 | if (rxcw & E1000_RXCW_IV) { | |
1467 | mac->serdes_link_state = e1000_serdes_link_down; | |
1468 | mac->serdes_has_link = false; | |
3bb99fe2 | 1469 | e_dbg("ANYSTATE -> DOWN\n"); |
c9523379 | 1470 | } |
1471 | } | |
1472 | } | |
1473 | ||
1474 | return ret_val; | |
1475 | } | |
1476 | ||
bc7f75fa AK |
1477 | /** |
1478 | * e1000_valid_led_default_82571 - Verify a valid default LED config | |
1479 | * @hw: pointer to the HW structure | |
1480 | * @data: pointer to the NVM (EEPROM) | |
1481 | * | |
1482 | * Read the EEPROM for the current default LED configuration. If the | |
1483 | * LED configuration is not valid, set to a valid LED configuration. | |
1484 | **/ | |
1485 | static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) | |
1486 | { | |
1487 | s32 ret_val; | |
1488 | ||
1489 | ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); | |
1490 | if (ret_val) { | |
3bb99fe2 | 1491 | e_dbg("NVM Read Error\n"); |
bc7f75fa AK |
1492 | return ret_val; |
1493 | } | |
1494 | ||
8c81c9c3 AD |
1495 | switch (hw->mac.type) { |
1496 | case e1000_82573: | |
1497 | case e1000_82574: | |
1498 | case e1000_82583: | |
1499 | if (*data == ID_LED_RESERVED_F746) | |
1500 | *data = ID_LED_DEFAULT_82573; | |
1501 | break; | |
1502 | default: | |
1503 | if (*data == ID_LED_RESERVED_0000 || | |
1504 | *data == ID_LED_RESERVED_FFFF) | |
1505 | *data = ID_LED_DEFAULT; | |
1506 | break; | |
1507 | } | |
bc7f75fa AK |
1508 | |
1509 | return 0; | |
1510 | } | |
1511 | ||
1512 | /** | |
1513 | * e1000e_get_laa_state_82571 - Get locally administered address state | |
1514 | * @hw: pointer to the HW structure | |
1515 | * | |
489815ce | 1516 | * Retrieve and return the current locally administered address state. |
bc7f75fa AK |
1517 | **/ |
1518 | bool e1000e_get_laa_state_82571(struct e1000_hw *hw) | |
1519 | { | |
1520 | if (hw->mac.type != e1000_82571) | |
564ea9bb | 1521 | return false; |
bc7f75fa AK |
1522 | |
1523 | return hw->dev_spec.e82571.laa_is_present; | |
1524 | } | |
1525 | ||
1526 | /** | |
1527 | * e1000e_set_laa_state_82571 - Set locally administered address state | |
1528 | * @hw: pointer to the HW structure | |
1529 | * @state: enable/disable locally administered address | |
1530 | * | |
5ff5b664 | 1531 | * Enable/Disable the current locally administered address state. |
bc7f75fa AK |
1532 | **/ |
1533 | void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) | |
1534 | { | |
1535 | if (hw->mac.type != e1000_82571) | |
1536 | return; | |
1537 | ||
1538 | hw->dev_spec.e82571.laa_is_present = state; | |
1539 | ||
1540 | /* If workaround is activated... */ | |
1541 | if (state) | |
ad68076e BA |
1542 | /* |
1543 | * Hold a copy of the LAA in RAR[14] This is done so that | |
bc7f75fa AK |
1544 | * between the time RAR[0] gets clobbered and the time it |
1545 | * gets fixed, the actual LAA is in one of the RARs and no | |
1546 | * incoming packets directed to this port are dropped. | |
1547 | * Eventually the LAA will be in RAR[0] and RAR[14]. | |
1548 | */ | |
1549 | e1000e_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1); | |
1550 | } | |
1551 | ||
1552 | /** | |
1553 | * e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum | |
1554 | * @hw: pointer to the HW structure | |
1555 | * | |
1556 | * Verifies that the EEPROM has completed the update. After updating the | |
1557 | * EEPROM, we need to check bit 15 in work 0x23 for the checksum fix. If | |
1558 | * the checksum fix is not implemented, we need to set the bit and update | |
1559 | * the checksum. Otherwise, if bit 15 is set and the checksum is incorrect, | |
1560 | * we need to return bad checksum. | |
1561 | **/ | |
1562 | static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) | |
1563 | { | |
1564 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1565 | s32 ret_val; | |
1566 | u16 data; | |
1567 | ||
1568 | if (nvm->type != e1000_nvm_flash_hw) | |
1569 | return 0; | |
1570 | ||
ad68076e BA |
1571 | /* |
1572 | * Check bit 4 of word 10h. If it is 0, firmware is done updating | |
bc7f75fa AK |
1573 | * 10h-12h. Checksum may need to be fixed. |
1574 | */ | |
1575 | ret_val = e1000_read_nvm(hw, 0x10, 1, &data); | |
1576 | if (ret_val) | |
1577 | return ret_val; | |
1578 | ||
1579 | if (!(data & 0x10)) { | |
ad68076e BA |
1580 | /* |
1581 | * Read 0x23 and check bit 15. This bit is a 1 | |
bc7f75fa AK |
1582 | * when the checksum has already been fixed. If |
1583 | * the checksum is still wrong and this bit is a | |
1584 | * 1, we need to return bad checksum. Otherwise, | |
1585 | * we need to set this bit to a 1 and update the | |
1586 | * checksum. | |
1587 | */ | |
1588 | ret_val = e1000_read_nvm(hw, 0x23, 1, &data); | |
1589 | if (ret_val) | |
1590 | return ret_val; | |
1591 | ||
1592 | if (!(data & 0x8000)) { | |
1593 | data |= 0x8000; | |
1594 | ret_val = e1000_write_nvm(hw, 0x23, 1, &data); | |
1595 | if (ret_val) | |
1596 | return ret_val; | |
1597 | ret_val = e1000e_update_nvm_checksum(hw); | |
1598 | } | |
1599 | } | |
1600 | ||
1601 | return 0; | |
1602 | } | |
1603 | ||
608f8a0d BA |
1604 | /** |
1605 | * e1000_read_mac_addr_82571 - Read device MAC address | |
1606 | * @hw: pointer to the HW structure | |
1607 | **/ | |
1608 | static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw) | |
1609 | { | |
1610 | s32 ret_val = 0; | |
1611 | ||
1612 | /* | |
1613 | * If there's an alternate MAC address place it in RAR0 | |
1614 | * so that it will override the Si installed default perm | |
1615 | * address. | |
1616 | */ | |
1617 | ret_val = e1000_check_alt_mac_addr_generic(hw); | |
1618 | if (ret_val) | |
1619 | goto out; | |
1620 | ||
1621 | ret_val = e1000_read_mac_addr_generic(hw); | |
1622 | ||
1623 | out: | |
1624 | return ret_val; | |
1625 | } | |
1626 | ||
17f208de BA |
1627 | /** |
1628 | * e1000_power_down_phy_copper_82571 - Remove link during PHY power down | |
1629 | * @hw: pointer to the HW structure | |
1630 | * | |
1631 | * In the case of a PHY power down to save power, or to turn off link during a | |
1632 | * driver unload, or wake on lan is not enabled, remove the link. | |
1633 | **/ | |
1634 | static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw) | |
1635 | { | |
1636 | struct e1000_phy_info *phy = &hw->phy; | |
1637 | struct e1000_mac_info *mac = &hw->mac; | |
1638 | ||
1639 | if (!(phy->ops.check_reset_block)) | |
1640 | return; | |
1641 | ||
1642 | /* If the management interface is not enabled, then power down */ | |
1643 | if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw))) | |
1644 | e1000_power_down_phy_copper(hw); | |
1645 | ||
1646 | return; | |
1647 | } | |
1648 | ||
bc7f75fa AK |
1649 | /** |
1650 | * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters | |
1651 | * @hw: pointer to the HW structure | |
1652 | * | |
1653 | * Clears the hardware counters by reading the counter registers. | |
1654 | **/ | |
1655 | static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw) | |
1656 | { | |
bc7f75fa AK |
1657 | e1000e_clear_hw_cntrs_base(hw); |
1658 | ||
99673d9b BA |
1659 | er32(PRC64); |
1660 | er32(PRC127); | |
1661 | er32(PRC255); | |
1662 | er32(PRC511); | |
1663 | er32(PRC1023); | |
1664 | er32(PRC1522); | |
1665 | er32(PTC64); | |
1666 | er32(PTC127); | |
1667 | er32(PTC255); | |
1668 | er32(PTC511); | |
1669 | er32(PTC1023); | |
1670 | er32(PTC1522); | |
1671 | ||
1672 | er32(ALGNERRC); | |
1673 | er32(RXERRC); | |
1674 | er32(TNCRS); | |
1675 | er32(CEXTERR); | |
1676 | er32(TSCTC); | |
1677 | er32(TSCTFC); | |
1678 | ||
1679 | er32(MGTPRC); | |
1680 | er32(MGTPDC); | |
1681 | er32(MGTPTC); | |
1682 | ||
1683 | er32(IAC); | |
1684 | er32(ICRXOC); | |
1685 | ||
1686 | er32(ICRXPTC); | |
1687 | er32(ICRXATC); | |
1688 | er32(ICTXPTC); | |
1689 | er32(ICTXATC); | |
1690 | er32(ICTXQEC); | |
1691 | er32(ICTXQMTC); | |
1692 | er32(ICRXDMTC); | |
bc7f75fa AK |
1693 | } |
1694 | ||
1695 | static struct e1000_mac_operations e82571_mac_ops = { | |
4662e82b | 1696 | /* .check_mng_mode: mac type dependent */ |
bc7f75fa | 1697 | /* .check_for_link: media type dependent */ |
a4f58f54 | 1698 | .id_led_init = e1000e_id_led_init, |
bc7f75fa AK |
1699 | .cleanup_led = e1000e_cleanup_led_generic, |
1700 | .clear_hw_cntrs = e1000_clear_hw_cntrs_82571, | |
1701 | .get_bus_info = e1000e_get_bus_info_pcie, | |
f4d2dd4c | 1702 | .set_lan_id = e1000_set_lan_id_multi_port_pcie, |
bc7f75fa | 1703 | /* .get_link_up_info: media type dependent */ |
4662e82b | 1704 | /* .led_on: mac type dependent */ |
bc7f75fa | 1705 | .led_off = e1000e_led_off_generic, |
ab8932f3 | 1706 | .update_mc_addr_list = e1000e_update_mc_addr_list_generic, |
caaddaf8 BA |
1707 | .write_vfta = e1000_write_vfta_generic, |
1708 | .clear_vfta = e1000_clear_vfta_82571, | |
bc7f75fa AK |
1709 | .reset_hw = e1000_reset_hw_82571, |
1710 | .init_hw = e1000_init_hw_82571, | |
1711 | .setup_link = e1000_setup_link_82571, | |
1712 | /* .setup_physical_interface: media type dependent */ | |
a4f58f54 | 1713 | .setup_led = e1000e_setup_led_generic, |
608f8a0d | 1714 | .read_mac_addr = e1000_read_mac_addr_82571, |
bc7f75fa AK |
1715 | }; |
1716 | ||
1717 | static struct e1000_phy_operations e82_phy_ops_igp = { | |
94d8186a | 1718 | .acquire = e1000_get_hw_semaphore_82571, |
94e5b651 | 1719 | .check_polarity = e1000_check_polarity_igp, |
bc7f75fa | 1720 | .check_reset_block = e1000e_check_reset_block_generic, |
94d8186a | 1721 | .commit = NULL, |
bc7f75fa AK |
1722 | .force_speed_duplex = e1000e_phy_force_speed_duplex_igp, |
1723 | .get_cfg_done = e1000_get_cfg_done_82571, | |
1724 | .get_cable_length = e1000e_get_cable_length_igp_2, | |
94d8186a BA |
1725 | .get_info = e1000e_get_phy_info_igp, |
1726 | .read_reg = e1000e_read_phy_reg_igp, | |
1727 | .release = e1000_put_hw_semaphore_82571, | |
1728 | .reset = e1000e_phy_hw_reset_generic, | |
bc7f75fa AK |
1729 | .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, |
1730 | .set_d3_lplu_state = e1000e_set_d3_lplu_state, | |
94d8186a | 1731 | .write_reg = e1000e_write_phy_reg_igp, |
75eb0fad | 1732 | .cfg_on_link_up = NULL, |
bc7f75fa AK |
1733 | }; |
1734 | ||
1735 | static struct e1000_phy_operations e82_phy_ops_m88 = { | |
94d8186a | 1736 | .acquire = e1000_get_hw_semaphore_82571, |
94e5b651 | 1737 | .check_polarity = e1000_check_polarity_m88, |
bc7f75fa | 1738 | .check_reset_block = e1000e_check_reset_block_generic, |
94d8186a | 1739 | .commit = e1000e_phy_sw_reset, |
bc7f75fa AK |
1740 | .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, |
1741 | .get_cfg_done = e1000e_get_cfg_done, | |
1742 | .get_cable_length = e1000e_get_cable_length_m88, | |
94d8186a BA |
1743 | .get_info = e1000e_get_phy_info_m88, |
1744 | .read_reg = e1000e_read_phy_reg_m88, | |
1745 | .release = e1000_put_hw_semaphore_82571, | |
1746 | .reset = e1000e_phy_hw_reset_generic, | |
bc7f75fa AK |
1747 | .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, |
1748 | .set_d3_lplu_state = e1000e_set_d3_lplu_state, | |
94d8186a | 1749 | .write_reg = e1000e_write_phy_reg_m88, |
75eb0fad | 1750 | .cfg_on_link_up = NULL, |
bc7f75fa AK |
1751 | }; |
1752 | ||
4662e82b | 1753 | static struct e1000_phy_operations e82_phy_ops_bm = { |
94d8186a | 1754 | .acquire = e1000_get_hw_semaphore_82571, |
94e5b651 | 1755 | .check_polarity = e1000_check_polarity_m88, |
4662e82b | 1756 | .check_reset_block = e1000e_check_reset_block_generic, |
94d8186a | 1757 | .commit = e1000e_phy_sw_reset, |
4662e82b BA |
1758 | .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, |
1759 | .get_cfg_done = e1000e_get_cfg_done, | |
1760 | .get_cable_length = e1000e_get_cable_length_m88, | |
94d8186a BA |
1761 | .get_info = e1000e_get_phy_info_m88, |
1762 | .read_reg = e1000e_read_phy_reg_bm2, | |
1763 | .release = e1000_put_hw_semaphore_82571, | |
1764 | .reset = e1000e_phy_hw_reset_generic, | |
4662e82b BA |
1765 | .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, |
1766 | .set_d3_lplu_state = e1000e_set_d3_lplu_state, | |
94d8186a | 1767 | .write_reg = e1000e_write_phy_reg_bm2, |
75eb0fad | 1768 | .cfg_on_link_up = NULL, |
4662e82b BA |
1769 | }; |
1770 | ||
bc7f75fa | 1771 | static struct e1000_nvm_operations e82571_nvm_ops = { |
94d8186a BA |
1772 | .acquire = e1000_acquire_nvm_82571, |
1773 | .read = e1000e_read_nvm_eerd, | |
1774 | .release = e1000_release_nvm_82571, | |
1775 | .update = e1000_update_nvm_checksum_82571, | |
bc7f75fa | 1776 | .valid_led_default = e1000_valid_led_default_82571, |
94d8186a BA |
1777 | .validate = e1000_validate_nvm_checksum_82571, |
1778 | .write = e1000_write_nvm_82571, | |
bc7f75fa AK |
1779 | }; |
1780 | ||
1781 | struct e1000_info e1000_82571_info = { | |
1782 | .mac = e1000_82571, | |
1783 | .flags = FLAG_HAS_HW_VLAN_FILTER | |
1784 | | FLAG_HAS_JUMBO_FRAMES | |
bc7f75fa AK |
1785 | | FLAG_HAS_WOL |
1786 | | FLAG_APME_IN_CTRL3 | |
1787 | | FLAG_RX_CSUM_ENABLED | |
1788 | | FLAG_HAS_CTRLEXT_ON_LOAD | |
bc7f75fa AK |
1789 | | FLAG_HAS_SMART_POWER_DOWN |
1790 | | FLAG_RESET_OVERWRITES_LAA /* errata */ | |
1791 | | FLAG_TARC_SPEED_MODE_BIT /* errata */ | |
1792 | | FLAG_APME_CHECK_PORT_B, | |
6f461f6c | 1793 | .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */ |
bc7f75fa | 1794 | .pba = 38, |
2adc55c9 | 1795 | .max_hw_frame_size = DEFAULT_JUMBO, |
69e3fd8c | 1796 | .get_variants = e1000_get_variants_82571, |
bc7f75fa AK |
1797 | .mac_ops = &e82571_mac_ops, |
1798 | .phy_ops = &e82_phy_ops_igp, | |
1799 | .nvm_ops = &e82571_nvm_ops, | |
1800 | }; | |
1801 | ||
1802 | struct e1000_info e1000_82572_info = { | |
1803 | .mac = e1000_82572, | |
1804 | .flags = FLAG_HAS_HW_VLAN_FILTER | |
1805 | | FLAG_HAS_JUMBO_FRAMES | |
bc7f75fa AK |
1806 | | FLAG_HAS_WOL |
1807 | | FLAG_APME_IN_CTRL3 | |
1808 | | FLAG_RX_CSUM_ENABLED | |
1809 | | FLAG_HAS_CTRLEXT_ON_LOAD | |
bc7f75fa | 1810 | | FLAG_TARC_SPEED_MODE_BIT, /* errata */ |
6f461f6c | 1811 | .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */ |
bc7f75fa | 1812 | .pba = 38, |
2adc55c9 | 1813 | .max_hw_frame_size = DEFAULT_JUMBO, |
69e3fd8c | 1814 | .get_variants = e1000_get_variants_82571, |
bc7f75fa AK |
1815 | .mac_ops = &e82571_mac_ops, |
1816 | .phy_ops = &e82_phy_ops_igp, | |
1817 | .nvm_ops = &e82571_nvm_ops, | |
1818 | }; | |
1819 | ||
1820 | struct e1000_info e1000_82573_info = { | |
1821 | .mac = e1000_82573, | |
1822 | .flags = FLAG_HAS_HW_VLAN_FILTER | |
bc7f75fa AK |
1823 | | FLAG_HAS_WOL |
1824 | | FLAG_APME_IN_CTRL3 | |
1825 | | FLAG_RX_CSUM_ENABLED | |
bc7f75fa AK |
1826 | | FLAG_HAS_SMART_POWER_DOWN |
1827 | | FLAG_HAS_AMT | |
bc7f75fa AK |
1828 | | FLAG_HAS_SWSM_ON_LOAD, |
1829 | .pba = 20, | |
2adc55c9 | 1830 | .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, |
69e3fd8c | 1831 | .get_variants = e1000_get_variants_82571, |
bc7f75fa AK |
1832 | .mac_ops = &e82571_mac_ops, |
1833 | .phy_ops = &e82_phy_ops_m88, | |
31f8c4fe | 1834 | .nvm_ops = &e82571_nvm_ops, |
bc7f75fa AK |
1835 | }; |
1836 | ||
4662e82b BA |
1837 | struct e1000_info e1000_82574_info = { |
1838 | .mac = e1000_82574, | |
1839 | .flags = FLAG_HAS_HW_VLAN_FILTER | |
1840 | | FLAG_HAS_MSIX | |
1841 | | FLAG_HAS_JUMBO_FRAMES | |
1842 | | FLAG_HAS_WOL | |
1843 | | FLAG_APME_IN_CTRL3 | |
1844 | | FLAG_RX_CSUM_ENABLED | |
1845 | | FLAG_HAS_SMART_POWER_DOWN | |
1846 | | FLAG_HAS_AMT | |
1847 | | FLAG_HAS_CTRLEXT_ON_LOAD, | |
1848 | .pba = 20, | |
a825e00c | 1849 | .max_hw_frame_size = DEFAULT_JUMBO, |
4662e82b BA |
1850 | .get_variants = e1000_get_variants_82571, |
1851 | .mac_ops = &e82571_mac_ops, | |
1852 | .phy_ops = &e82_phy_ops_bm, | |
1853 | .nvm_ops = &e82571_nvm_ops, | |
1854 | }; | |
1855 | ||
8c81c9c3 AD |
1856 | struct e1000_info e1000_82583_info = { |
1857 | .mac = e1000_82583, | |
1858 | .flags = FLAG_HAS_HW_VLAN_FILTER | |
1859 | | FLAG_HAS_WOL | |
1860 | | FLAG_APME_IN_CTRL3 | |
1861 | | FLAG_RX_CSUM_ENABLED | |
1862 | | FLAG_HAS_SMART_POWER_DOWN | |
1863 | | FLAG_HAS_AMT | |
1864 | | FLAG_HAS_CTRLEXT_ON_LOAD, | |
1865 | .pba = 20, | |
a825e00c | 1866 | .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, |
8c81c9c3 AD |
1867 | .get_variants = e1000_get_variants_82571, |
1868 | .mac_ops = &e82571_mac_ops, | |
1869 | .phy_ops = &e82_phy_ops_bm, | |
1870 | .nvm_ops = &e82571_nvm_ops, | |
1871 | }; | |
1872 |