Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/acorn/net/ether3.c | |
3 | * | |
4 | * Copyright (C) 1995-2000 Russell King | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | * | |
10 | * SEEQ nq8005 ethernet driver for Acorn/ANT Ether3 card | |
11 | * for Acorn machines | |
12 | * | |
13 | * By Russell King, with some suggestions from borris@ant.co.uk | |
14 | * | |
15 | * Changelog: | |
16 | * 1.04 RMK 29/02/1996 Won't pass packets that are from our ethernet | |
17 | * address up to the higher levels - they're | |
18 | * silently ignored. I/F can now be put into | |
19 | * multicast mode. Receiver routine optimised. | |
20 | * 1.05 RMK 30/02/1996 Now claims interrupt at open when part of | |
21 | * the kernel rather than when a module. | |
22 | * 1.06 RMK 02/03/1996 Various code cleanups | |
23 | * 1.07 RMK 13/10/1996 Optimised interrupt routine and transmit | |
24 | * routines. | |
25 | * 1.08 RMK 14/10/1996 Fixed problem with too many packets, | |
26 | * prevented the kernel message about dropped | |
27 | * packets appearing too many times a second. | |
28 | * Now does not disable all IRQs, only the IRQ | |
29 | * used by this card. | |
30 | * 1.09 RMK 10/11/1996 Only enables TX irq when buffer space is low, | |
31 | * but we still service the TX queue if we get a | |
32 | * RX interrupt. | |
33 | * 1.10 RMK 15/07/1997 Fixed autoprobing of NQ8004. | |
34 | * 1.11 RMK 16/11/1997 Fixed autoprobing of NQ8005A. | |
35 | * 1.12 RMK 31/12/1997 Removed reference to dev_tint for Linux 2.1. | |
36 | * RMK 27/06/1998 Changed asm/delay.h to linux/delay.h. | |
37 | * 1.13 RMK 29/06/1998 Fixed problem with transmission of packets. | |
38 | * Chip seems to have a bug in, whereby if the | |
39 | * packet starts two bytes from the end of the | |
40 | * buffer, it corrupts the receiver chain, and | |
41 | * never updates the transmit status correctly. | |
42 | * 1.14 RMK 07/01/1998 Added initial code for ETHERB addressing. | |
43 | * 1.15 RMK 30/04/1999 More fixes to the transmit routine for buggy | |
44 | * hardware. | |
45 | * 1.16 RMK 10/02/2000 Updated for 2.3.43 | |
46 | * 1.17 RMK 13/05/2000 Updated for 2.3.99-pre8 | |
47 | */ | |
48 | ||
49 | #include <linux/module.h> | |
50 | #include <linux/kernel.h> | |
1da177e4 LT |
51 | #include <linux/types.h> |
52 | #include <linux/fcntl.h> | |
53 | #include <linux/interrupt.h> | |
1da177e4 LT |
54 | #include <linux/ioport.h> |
55 | #include <linux/in.h> | |
56 | #include <linux/slab.h> | |
57 | #include <linux/string.h> | |
58 | #include <linux/errno.h> | |
59 | #include <linux/netdevice.h> | |
60 | #include <linux/etherdevice.h> | |
61 | #include <linux/skbuff.h> | |
62 | #include <linux/device.h> | |
63 | #include <linux/init.h> | |
64 | #include <linux/delay.h> | |
65 | #include <linux/bitops.h> | |
66 | ||
67 | #include <asm/system.h> | |
68 | #include <asm/ecard.h> | |
69 | #include <asm/io.h> | |
1da177e4 | 70 | |
07ed3131 | 71 | static char version[] __devinitdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; |
1da177e4 LT |
72 | |
73 | #include "ether3.h" | |
74 | ||
75 | static unsigned int net_debug = NET_DEBUG; | |
76 | ||
77 | static void ether3_setmulticastlist(struct net_device *dev); | |
78 | static int ether3_rx(struct net_device *dev, unsigned int maxcnt); | |
79 | static void ether3_tx(struct net_device *dev); | |
80 | static int ether3_open (struct net_device *dev); | |
81 | static int ether3_sendpacket (struct sk_buff *skb, struct net_device *dev); | |
7d12e780 | 82 | static irqreturn_t ether3_interrupt (int irq, void *dev_id); |
1da177e4 LT |
83 | static int ether3_close (struct net_device *dev); |
84 | static struct net_device_stats *ether3_getstats (struct net_device *dev); | |
85 | static void ether3_setmulticastlist (struct net_device *dev); | |
86 | static void ether3_timeout(struct net_device *dev); | |
87 | ||
88 | #define BUS_16 2 | |
89 | #define BUS_8 1 | |
90 | #define BUS_UNKNOWN 0 | |
91 | ||
92 | /* --------------------------------------------------------------------------- */ | |
93 | ||
94 | typedef enum { | |
95 | buffer_write, | |
96 | buffer_read | |
97 | } buffer_rw_t; | |
98 | ||
99 | /* | |
100 | * ether3 read/write. Slow things down a bit... | |
101 | * The SEEQ8005 doesn't like us writing to its registers | |
102 | * too quickly. | |
103 | */ | |
104 | static inline void ether3_outb(int v, const void __iomem *r) | |
105 | { | |
106 | writeb(v, r); | |
107 | udelay(1); | |
108 | } | |
109 | ||
110 | static inline void ether3_outw(int v, const void __iomem *r) | |
111 | { | |
112 | writew(v, r); | |
113 | udelay(1); | |
114 | } | |
115 | #define ether3_inb(r) ({ unsigned int __v = readb((r)); udelay(1); __v; }) | |
116 | #define ether3_inw(r) ({ unsigned int __v = readw((r)); udelay(1); __v; }) | |
117 | ||
118 | static int | |
119 | ether3_setbuffer(struct net_device *dev, buffer_rw_t read, int start) | |
120 | { | |
121 | int timeout = 1000; | |
122 | ||
123 | ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); | |
124 | ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); | |
125 | ||
126 | while ((ether3_inw(REG_STATUS) & STAT_FIFOEMPTY) == 0) { | |
127 | if (!timeout--) { | |
128 | printk("%s: setbuffer broken\n", dev->name); | |
129 | priv(dev)->broken = 1; | |
130 | return 1; | |
131 | } | |
132 | udelay(1); | |
133 | } | |
134 | ||
135 | if (read == buffer_read) { | |
136 | ether3_outw(start, REG_DMAADDR); | |
137 | ether3_outw(priv(dev)->regs.command | CMD_FIFOREAD, REG_COMMAND); | |
138 | } else { | |
139 | ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); | |
140 | ether3_outw(start, REG_DMAADDR); | |
141 | } | |
142 | return 0; | |
143 | } | |
144 | ||
145 | /* | |
146 | * write data to the buffer memory | |
147 | */ | |
148 | #define ether3_writebuffer(dev,data,length) \ | |
149 | writesw(REG_BUFWIN, (data), (length) >> 1) | |
150 | ||
151 | #define ether3_writeword(dev,data) \ | |
152 | writew((data), REG_BUFWIN) | |
153 | ||
154 | #define ether3_writelong(dev,data) { \ | |
155 | void __iomem *reg_bufwin = REG_BUFWIN; \ | |
156 | writew((data), reg_bufwin); \ | |
157 | writew((data) >> 16, reg_bufwin); \ | |
158 | } | |
159 | ||
160 | /* | |
161 | * read data from the buffer memory | |
162 | */ | |
163 | #define ether3_readbuffer(dev,data,length) \ | |
164 | readsw(REG_BUFWIN, (data), (length) >> 1) | |
165 | ||
166 | #define ether3_readword(dev) \ | |
167 | readw(REG_BUFWIN) | |
168 | ||
169 | #define ether3_readlong(dev) \ | |
170 | readw(REG_BUFWIN) | (readw(REG_BUFWIN) << 16) | |
171 | ||
172 | /* | |
173 | * Switch LED off... | |
174 | */ | |
175 | static void ether3_ledoff(unsigned long data) | |
176 | { | |
177 | struct net_device *dev = (struct net_device *)data; | |
178 | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | |
179 | } | |
180 | ||
181 | /* | |
182 | * switch LED on... | |
183 | */ | |
184 | static inline void ether3_ledon(struct net_device *dev) | |
185 | { | |
186 | del_timer(&priv(dev)->timer); | |
187 | priv(dev)->timer.expires = jiffies + HZ / 50; /* leave on for 1/50th second */ | |
188 | priv(dev)->timer.data = (unsigned long)dev; | |
189 | priv(dev)->timer.function = ether3_ledoff; | |
190 | add_timer(&priv(dev)->timer); | |
191 | if (priv(dev)->regs.config2 & CFG2_CTRLO) | |
192 | ether3_outw(priv(dev)->regs.config2 &= ~CFG2_CTRLO, REG_CONFIG2); | |
193 | } | |
194 | ||
195 | /* | |
196 | * Read the ethernet address string from the on board rom. | |
197 | * This is an ascii string!!! | |
198 | */ | |
bffa2154 | 199 | static int __devinit |
1da177e4 LT |
200 | ether3_addr(char *addr, struct expansion_card *ec) |
201 | { | |
202 | struct in_chunk_dir cd; | |
203 | char *s; | |
204 | ||
205 | if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) { | |
206 | int i; | |
207 | for (i = 0; i<6; i++) { | |
208 | addr[i] = simple_strtoul(s + 1, &s, 0x10); | |
209 | if (*s != (i==5?')' : ':' )) | |
210 | break; | |
211 | } | |
212 | if (i == 6) | |
213 | return 0; | |
214 | } | |
215 | /* I wonder if we should even let the user continue in this case | |
216 | * - no, it would be better to disable the device | |
217 | */ | |
218 | printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n"); | |
219 | return -ENODEV; | |
220 | } | |
221 | ||
222 | /* --------------------------------------------------------------------------- */ | |
223 | ||
bffa2154 | 224 | static int __devinit |
1da177e4 LT |
225 | ether3_ramtest(struct net_device *dev, unsigned char byte) |
226 | { | |
227 | unsigned char *buffer = kmalloc(RX_END, GFP_KERNEL); | |
228 | int i,ret = 0; | |
229 | int max_errors = 4; | |
230 | int bad = -1; | |
231 | ||
232 | if (!buffer) | |
233 | return 1; | |
234 | ||
235 | memset(buffer, byte, RX_END); | |
236 | ether3_setbuffer(dev, buffer_write, 0); | |
237 | ether3_writebuffer(dev, buffer, TX_END); | |
238 | ether3_setbuffer(dev, buffer_write, RX_START); | |
239 | ether3_writebuffer(dev, buffer + RX_START, RX_LEN); | |
240 | memset(buffer, byte ^ 0xff, RX_END); | |
241 | ether3_setbuffer(dev, buffer_read, 0); | |
242 | ether3_readbuffer(dev, buffer, TX_END); | |
243 | ether3_setbuffer(dev, buffer_read, RX_START); | |
244 | ether3_readbuffer(dev, buffer + RX_START, RX_LEN); | |
245 | ||
246 | for (i = 0; i < RX_END; i++) { | |
247 | if (buffer[i] != byte) { | |
248 | if (max_errors > 0 && bad != buffer[i]) { | |
249 | printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X", | |
250 | dev->name, buffer[i], byte, i); | |
251 | ret = 2; | |
252 | max_errors--; | |
253 | bad = i; | |
254 | } | |
255 | } else { | |
256 | if (bad != -1) { | |
257 | if (bad != i - 1) | |
258 | printk(" - 0x%04X\n", i - 1); | |
259 | printk("\n"); | |
260 | bad = -1; | |
261 | } | |
262 | } | |
263 | } | |
264 | if (bad != -1) | |
265 | printk(" - 0xffff\n"); | |
266 | kfree(buffer); | |
267 | ||
268 | return ret; | |
269 | } | |
270 | ||
271 | /* ------------------------------------------------------------------------------- */ | |
272 | ||
bffa2154 | 273 | static int __devinit ether3_init_2(struct net_device *dev) |
1da177e4 LT |
274 | { |
275 | int i; | |
276 | ||
277 | priv(dev)->regs.config1 = CFG1_RECVCOMPSTAT0|CFG1_DMABURST8; | |
278 | priv(dev)->regs.config2 = CFG2_CTRLO|CFG2_RECVCRC|CFG2_ERRENCRC; | |
279 | priv(dev)->regs.command = 0; | |
280 | ||
281 | /* | |
282 | * Set up our hardware address | |
283 | */ | |
284 | ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); | |
285 | for (i = 0; i < 6; i++) | |
286 | ether3_outb(dev->dev_addr[i], REG_BUFWIN); | |
287 | ||
288 | if (dev->flags & IFF_PROMISC) | |
289 | priv(dev)->regs.config1 |= CFG1_RECVPROMISC; | |
290 | else if (dev->flags & IFF_MULTICAST) | |
291 | priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; | |
292 | else | |
293 | priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; | |
294 | ||
295 | /* | |
296 | * There is a problem with the NQ8005 in that it occasionally loses the | |
297 | * last two bytes. To get round this problem, we receive the CRC as | |
298 | * well. That way, if we do lose the last two, then it doesn't matter. | |
299 | */ | |
300 | ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); | |
301 | ether3_outw((TX_END>>8) - 1, REG_BUFWIN); | |
302 | ether3_outw(priv(dev)->rx_head, REG_RECVPTR); | |
303 | ether3_outw(0, REG_TRANSMITPTR); | |
304 | ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); | |
305 | ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); | |
306 | ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); | |
307 | ether3_outw(priv(dev)->regs.command, REG_COMMAND); | |
308 | ||
309 | i = ether3_ramtest(dev, 0x5A); | |
310 | if(i) | |
311 | return i; | |
312 | i = ether3_ramtest(dev, 0x1E); | |
313 | if(i) | |
314 | return i; | |
315 | ||
316 | ether3_setbuffer(dev, buffer_write, 0); | |
317 | ether3_writelong(dev, 0); | |
318 | return 0; | |
319 | } | |
320 | ||
321 | static void | |
322 | ether3_init_for_open(struct net_device *dev) | |
323 | { | |
324 | int i; | |
325 | ||
326 | memset(&priv(dev)->stats, 0, sizeof(struct net_device_stats)); | |
327 | ||
328 | /* Reset the chip */ | |
329 | ether3_outw(CFG2_RESET, REG_CONFIG2); | |
330 | udelay(4); | |
331 | ||
332 | priv(dev)->regs.command = 0; | |
333 | ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); | |
334 | while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) | |
335 | barrier(); | |
336 | ||
337 | ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); | |
338 | for (i = 0; i < 6; i++) | |
339 | ether3_outb(dev->dev_addr[i], REG_BUFWIN); | |
340 | ||
341 | priv(dev)->tx_head = 0; | |
342 | priv(dev)->tx_tail = 0; | |
343 | priv(dev)->regs.config2 |= CFG2_CTRLO; | |
344 | priv(dev)->rx_head = RX_START; | |
345 | ||
346 | ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); | |
347 | ether3_outw((TX_END>>8) - 1, REG_BUFWIN); | |
348 | ether3_outw(priv(dev)->rx_head, REG_RECVPTR); | |
349 | ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); | |
350 | ether3_outw(0, REG_TRANSMITPTR); | |
351 | ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); | |
352 | ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); | |
353 | ||
354 | ether3_setbuffer(dev, buffer_write, 0); | |
355 | ether3_writelong(dev, 0); | |
356 | ||
357 | priv(dev)->regs.command = CMD_ENINTRX | CMD_ENINTTX; | |
358 | ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); | |
359 | } | |
360 | ||
361 | static inline int | |
362 | ether3_probe_bus_8(struct net_device *dev, int val) | |
363 | { | |
364 | int write_low, write_high, read_low, read_high; | |
365 | ||
366 | write_low = val & 255; | |
367 | write_high = val >> 8; | |
368 | ||
369 | printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low); | |
370 | ||
371 | ether3_outb(write_low, REG_RECVPTR); | |
372 | ether3_outb(write_high, REG_RECVPTR + 4); | |
373 | ||
374 | read_low = ether3_inb(REG_RECVPTR); | |
375 | read_high = ether3_inb(REG_RECVPTR + 4); | |
376 | ||
377 | printk(", read8 [%02X:%02X]\n", read_high, read_low); | |
378 | ||
379 | return read_low == write_low && read_high == write_high; | |
380 | } | |
381 | ||
382 | static inline int | |
383 | ether3_probe_bus_16(struct net_device *dev, int val) | |
384 | { | |
385 | int read_val; | |
386 | ||
387 | ether3_outw(val, REG_RECVPTR); | |
388 | read_val = ether3_inw(REG_RECVPTR); | |
389 | ||
390 | printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val); | |
391 | ||
392 | return read_val == val; | |
393 | } | |
394 | ||
395 | /* | |
396 | * Open/initialize the board. This is called (in the current kernel) | |
397 | * sometime after booting when the 'ifconfig' program is run. | |
398 | * | |
399 | * This routine should set everything up anew at each open, even | |
400 | * registers that "should" only need to be set once at boot, so that | |
401 | * there is non-reboot way to recover if something goes wrong. | |
402 | */ | |
403 | static int | |
404 | ether3_open(struct net_device *dev) | |
405 | { | |
406 | if (!is_valid_ether_addr(dev->dev_addr)) { | |
407 | printk(KERN_WARNING "%s: invalid ethernet MAC address\n", | |
408 | dev->name); | |
409 | return -EINVAL; | |
410 | } | |
411 | ||
412 | if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev)) | |
413 | return -EAGAIN; | |
414 | ||
415 | ether3_init_for_open(dev); | |
416 | ||
417 | netif_start_queue(dev); | |
418 | ||
419 | return 0; | |
420 | } | |
421 | ||
422 | /* | |
423 | * The inverse routine to ether3_open(). | |
424 | */ | |
425 | static int | |
426 | ether3_close(struct net_device *dev) | |
427 | { | |
428 | netif_stop_queue(dev); | |
429 | ||
430 | disable_irq(dev->irq); | |
431 | ||
432 | ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); | |
433 | priv(dev)->regs.command = 0; | |
434 | while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) | |
435 | barrier(); | |
436 | ether3_outb(0x80, REG_CONFIG2 + 4); | |
437 | ether3_outw(0, REG_COMMAND); | |
438 | ||
439 | free_irq(dev->irq, dev); | |
440 | ||
441 | return 0; | |
442 | } | |
443 | ||
444 | /* | |
445 | * Get the current statistics. This may be called with the card open or | |
446 | * closed. | |
447 | */ | |
448 | static struct net_device_stats *ether3_getstats(struct net_device *dev) | |
449 | { | |
450 | return &priv(dev)->stats; | |
451 | } | |
452 | ||
453 | /* | |
454 | * Set or clear promiscuous/multicast mode filter for this adaptor. | |
455 | * | |
456 | * We don't attempt any packet filtering. The card may have a SEEQ 8004 | |
457 | * in which does not have the other ethernet address registers present... | |
458 | */ | |
459 | static void ether3_setmulticastlist(struct net_device *dev) | |
460 | { | |
461 | priv(dev)->regs.config1 &= ~CFG1_RECVPROMISC; | |
462 | ||
463 | if (dev->flags & IFF_PROMISC) { | |
464 | /* promiscuous mode */ | |
465 | priv(dev)->regs.config1 |= CFG1_RECVPROMISC; | |
dbf812d6 | 466 | } else if (dev->flags & IFF_ALLMULTI || dev->mc_count) { |
1da177e4 LT |
467 | priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; |
468 | } else | |
469 | priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; | |
470 | ||
471 | ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); | |
472 | } | |
473 | ||
474 | static void ether3_timeout(struct net_device *dev) | |
475 | { | |
476 | unsigned long flags; | |
477 | ||
478 | del_timer(&priv(dev)->timer); | |
479 | ||
480 | local_irq_save(flags); | |
481 | printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name); | |
482 | printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name, | |
483 | ether3_inw(REG_STATUS), ether3_inw(REG_CONFIG1), ether3_inw(REG_CONFIG2)); | |
484 | printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name, | |
485 | ether3_inw(REG_RECVPTR), ether3_inw(REG_RECVEND), ether3_inw(REG_TRANSMITPTR)); | |
486 | printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name, | |
487 | priv(dev)->tx_head, priv(dev)->tx_tail); | |
488 | ether3_setbuffer(dev, buffer_read, priv(dev)->tx_tail); | |
489 | printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev)); | |
490 | local_irq_restore(flags); | |
491 | ||
492 | priv(dev)->regs.config2 |= CFG2_CTRLO; | |
493 | priv(dev)->stats.tx_errors += 1; | |
494 | ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); | |
495 | priv(dev)->tx_head = priv(dev)->tx_tail = 0; | |
496 | ||
497 | netif_wake_queue(dev); | |
498 | } | |
499 | ||
500 | /* | |
501 | * Transmit a packet | |
502 | */ | |
503 | static int | |
504 | ether3_sendpacket(struct sk_buff *skb, struct net_device *dev) | |
505 | { | |
506 | unsigned long flags; | |
507 | unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; | |
508 | unsigned int ptr, next_ptr; | |
509 | ||
510 | if (priv(dev)->broken) { | |
511 | dev_kfree_skb(skb); | |
512 | priv(dev)->stats.tx_dropped ++; | |
513 | netif_start_queue(dev); | |
514 | return 0; | |
515 | } | |
516 | ||
517 | length = (length + 1) & ~1; | |
518 | if (length != skb->len) { | |
5b057c6b | 519 | if (skb_padto(skb, length)) |
1da177e4 LT |
520 | goto out; |
521 | } | |
522 | ||
523 | next_ptr = (priv(dev)->tx_head + 1) & 15; | |
524 | ||
525 | local_irq_save(flags); | |
526 | ||
527 | if (priv(dev)->tx_tail == next_ptr) { | |
528 | local_irq_restore(flags); | |
529 | return 1; /* unable to queue */ | |
530 | } | |
531 | ||
532 | dev->trans_start = jiffies; | |
533 | ptr = 0x600 * priv(dev)->tx_head; | |
534 | priv(dev)->tx_head = next_ptr; | |
535 | next_ptr *= 0x600; | |
536 | ||
537 | #define TXHDR_FLAGS (TXHDR_TRANSMIT|TXHDR_CHAINCONTINUE|TXHDR_DATAFOLLOWS|TXHDR_ENSUCCESS) | |
538 | ||
539 | ether3_setbuffer(dev, buffer_write, next_ptr); | |
540 | ether3_writelong(dev, 0); | |
541 | ether3_setbuffer(dev, buffer_write, ptr); | |
542 | ether3_writelong(dev, 0); | |
543 | ether3_writebuffer(dev, skb->data, length); | |
544 | ether3_writeword(dev, htons(next_ptr)); | |
545 | ether3_writeword(dev, TXHDR_CHAINCONTINUE >> 16); | |
546 | ether3_setbuffer(dev, buffer_write, ptr); | |
547 | ether3_writeword(dev, htons((ptr + length + 4))); | |
548 | ether3_writeword(dev, TXHDR_FLAGS >> 16); | |
549 | ether3_ledon(dev); | |
550 | ||
551 | if (!(ether3_inw(REG_STATUS) & STAT_TXON)) { | |
552 | ether3_outw(ptr, REG_TRANSMITPTR); | |
553 | ether3_outw(priv(dev)->regs.command | CMD_TXON, REG_COMMAND); | |
554 | } | |
555 | ||
556 | next_ptr = (priv(dev)->tx_head + 1) & 15; | |
557 | local_irq_restore(flags); | |
558 | ||
559 | dev_kfree_skb(skb); | |
560 | ||
561 | if (priv(dev)->tx_tail == next_ptr) | |
562 | netif_stop_queue(dev); | |
563 | ||
564 | out: | |
565 | return 0; | |
566 | } | |
567 | ||
568 | static irqreturn_t | |
7d12e780 | 569 | ether3_interrupt(int irq, void *dev_id) |
1da177e4 LT |
570 | { |
571 | struct net_device *dev = (struct net_device *)dev_id; | |
572 | unsigned int status, handled = IRQ_NONE; | |
573 | ||
574 | #if NET_DEBUG > 1 | |
575 | if(net_debug & DEBUG_INT) | |
576 | printk("eth3irq: %d ", irq); | |
577 | #endif | |
578 | ||
579 | status = ether3_inw(REG_STATUS); | |
580 | ||
581 | if (status & STAT_INTRX) { | |
582 | ether3_outw(CMD_ACKINTRX | priv(dev)->regs.command, REG_COMMAND); | |
583 | ether3_rx(dev, 12); | |
584 | handled = IRQ_HANDLED; | |
585 | } | |
586 | ||
587 | if (status & STAT_INTTX) { | |
588 | ether3_outw(CMD_ACKINTTX | priv(dev)->regs.command, REG_COMMAND); | |
589 | ether3_tx(dev); | |
590 | handled = IRQ_HANDLED; | |
591 | } | |
592 | ||
593 | #if NET_DEBUG > 1 | |
594 | if(net_debug & DEBUG_INT) | |
595 | printk("done\n"); | |
596 | #endif | |
597 | return handled; | |
598 | } | |
599 | ||
600 | /* | |
601 | * If we have a good packet(s), get it/them out of the buffers. | |
602 | */ | |
603 | static int ether3_rx(struct net_device *dev, unsigned int maxcnt) | |
604 | { | |
605 | unsigned int next_ptr = priv(dev)->rx_head, received = 0; | |
606 | ||
607 | ether3_ledon(dev); | |
608 | ||
609 | do { | |
610 | unsigned int this_ptr, status; | |
611 | unsigned char addrs[16]; | |
612 | ||
613 | /* | |
614 | * read the first 16 bytes from the buffer. | |
615 | * This contains the status bytes etc and ethernet addresses, | |
616 | * and we also check the source ethernet address to see if | |
617 | * it originated from us. | |
618 | */ | |
619 | { | |
620 | unsigned int temp_ptr; | |
621 | ether3_setbuffer(dev, buffer_read, next_ptr); | |
622 | temp_ptr = ether3_readword(dev); | |
623 | status = ether3_readword(dev); | |
624 | if ((status & (RXSTAT_DONE | RXHDR_CHAINCONTINUE | RXHDR_RECEIVE)) != | |
625 | (RXSTAT_DONE | RXHDR_CHAINCONTINUE) || !temp_ptr) | |
626 | break; | |
627 | ||
628 | this_ptr = next_ptr + 4; | |
629 | next_ptr = ntohs(temp_ptr); | |
630 | } | |
631 | ether3_setbuffer(dev, buffer_read, this_ptr); | |
632 | ether3_readbuffer(dev, addrs+2, 12); | |
633 | ||
634 | if (next_ptr < RX_START || next_ptr >= RX_END) { | |
635 | int i; | |
636 | printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head); | |
637 | printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8); | |
638 | for (i = 2; i < 14; i++) | |
639 | printk("%02X ", addrs[i]); | |
640 | printk("\n"); | |
641 | next_ptr = priv(dev)->rx_head; | |
642 | break; | |
643 | } | |
644 | /* | |
645 | * ignore our own packets... | |
646 | */ | |
647 | if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) && | |
648 | !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) { | |
649 | maxcnt ++; /* compensate for loopedback packet */ | |
650 | ether3_outw(next_ptr >> 8, REG_RECVEND); | |
651 | } else | |
652 | if (!(status & (RXSTAT_OVERSIZE|RXSTAT_CRCERROR|RXSTAT_DRIBBLEERROR|RXSTAT_SHORTPACKET))) { | |
653 | unsigned int length = next_ptr - this_ptr; | |
654 | struct sk_buff *skb; | |
655 | ||
656 | if (next_ptr <= this_ptr) | |
657 | length += RX_END - RX_START; | |
658 | ||
659 | skb = dev_alloc_skb(length + 2); | |
660 | if (skb) { | |
661 | unsigned char *buf; | |
662 | ||
1da177e4 LT |
663 | skb_reserve(skb, 2); |
664 | buf = skb_put(skb, length); | |
665 | ether3_readbuffer(dev, buf + 12, length - 12); | |
666 | ether3_outw(next_ptr >> 8, REG_RECVEND); | |
667 | *(unsigned short *)(buf + 0) = *(unsigned short *)(addrs + 2); | |
668 | *(unsigned long *)(buf + 2) = *(unsigned long *)(addrs + 4); | |
669 | *(unsigned long *)(buf + 6) = *(unsigned long *)(addrs + 8); | |
670 | *(unsigned short *)(buf + 10) = *(unsigned short *)(addrs + 12); | |
671 | skb->protocol = eth_type_trans(skb, dev); | |
672 | netif_rx(skb); | |
673 | received ++; | |
674 | } else | |
675 | goto dropping; | |
676 | } else { | |
677 | struct net_device_stats *stats = &priv(dev)->stats; | |
678 | ether3_outw(next_ptr >> 8, REG_RECVEND); | |
679 | if (status & RXSTAT_OVERSIZE) stats->rx_over_errors ++; | |
680 | if (status & RXSTAT_CRCERROR) stats->rx_crc_errors ++; | |
681 | if (status & RXSTAT_DRIBBLEERROR) stats->rx_fifo_errors ++; | |
682 | if (status & RXSTAT_SHORTPACKET) stats->rx_length_errors ++; | |
683 | stats->rx_errors++; | |
684 | } | |
685 | } | |
686 | while (-- maxcnt); | |
687 | ||
688 | done: | |
689 | priv(dev)->stats.rx_packets += received; | |
690 | priv(dev)->rx_head = next_ptr; | |
691 | /* | |
692 | * If rx went off line, then that means that the buffer may be full. We | |
693 | * have dropped at least one packet. | |
694 | */ | |
695 | if (!(ether3_inw(REG_STATUS) & STAT_RXON)) { | |
696 | priv(dev)->stats.rx_dropped ++; | |
697 | ether3_outw(next_ptr, REG_RECVPTR); | |
698 | ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); | |
699 | } | |
700 | ||
701 | return maxcnt; | |
702 | ||
703 | dropping:{ | |
704 | static unsigned long last_warned; | |
705 | ||
706 | ether3_outw(next_ptr >> 8, REG_RECVEND); | |
707 | /* | |
708 | * Don't print this message too many times... | |
709 | */ | |
710 | if (time_after(jiffies, last_warned + 10 * HZ)) { | |
711 | last_warned = jiffies; | |
712 | printk("%s: memory squeeze, dropping packet.\n", dev->name); | |
713 | } | |
714 | priv(dev)->stats.rx_dropped ++; | |
715 | goto done; | |
716 | } | |
717 | } | |
718 | ||
719 | /* | |
720 | * Update stats for the transmitted packet(s) | |
721 | */ | |
722 | static void ether3_tx(struct net_device *dev) | |
723 | { | |
724 | unsigned int tx_tail = priv(dev)->tx_tail; | |
725 | int max_work = 14; | |
726 | ||
727 | do { | |
728 | unsigned long status; | |
729 | ||
730 | /* | |
731 | * Read the packet header | |
732 | */ | |
733 | ether3_setbuffer(dev, buffer_read, tx_tail * 0x600); | |
734 | status = ether3_readlong(dev); | |
735 | ||
736 | /* | |
737 | * Check to see if this packet has been transmitted | |
738 | */ | |
739 | if ((status & (TXSTAT_DONE | TXHDR_TRANSMIT)) != | |
740 | (TXSTAT_DONE | TXHDR_TRANSMIT)) | |
741 | break; | |
742 | ||
743 | /* | |
744 | * Update errors | |
745 | */ | |
746 | if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS))) | |
747 | priv(dev)->stats.tx_packets++; | |
748 | else { | |
749 | priv(dev)->stats.tx_errors ++; | |
750 | if (status & TXSTAT_16COLLISIONS) | |
751 | priv(dev)->stats.collisions += 16; | |
752 | if (status & TXSTAT_BABBLED) | |
753 | priv(dev)->stats.tx_fifo_errors ++; | |
754 | } | |
755 | ||
756 | tx_tail = (tx_tail + 1) & 15; | |
757 | } while (--max_work); | |
758 | ||
759 | if (priv(dev)->tx_tail != tx_tail) { | |
760 | priv(dev)->tx_tail = tx_tail; | |
761 | netif_wake_queue(dev); | |
762 | } | |
763 | } | |
764 | ||
bffa2154 | 765 | static void __devinit ether3_banner(void) |
1da177e4 LT |
766 | { |
767 | static unsigned version_printed = 0; | |
768 | ||
769 | if (net_debug && version_printed++ == 0) | |
770 | printk(KERN_INFO "%s", version); | |
771 | } | |
772 | ||
773 | static int __devinit | |
774 | ether3_probe(struct expansion_card *ec, const struct ecard_id *id) | |
775 | { | |
776 | const struct ether3_data *data = id->data; | |
777 | struct net_device *dev; | |
0795af57 JP |
778 | int bus_type, ret; |
779 | DECLARE_MAC_BUF(mac); | |
1da177e4 LT |
780 | |
781 | ether3_banner(); | |
782 | ||
783 | ret = ecard_request_resources(ec); | |
784 | if (ret) | |
785 | goto out; | |
786 | ||
787 | dev = alloc_etherdev(sizeof(struct dev_priv)); | |
788 | if (!dev) { | |
789 | ret = -ENOMEM; | |
790 | goto release; | |
791 | } | |
792 | ||
1da177e4 LT |
793 | SET_NETDEV_DEV(dev, &ec->dev); |
794 | ||
10bdaaa0 | 795 | priv(dev)->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); |
1da177e4 LT |
796 | if (!priv(dev)->base) { |
797 | ret = -ENOMEM; | |
798 | goto free; | |
799 | } | |
800 | ||
801 | ec->irqaddr = priv(dev)->base + data->base_offset; | |
802 | ec->irqmask = 0xf0; | |
803 | ||
804 | priv(dev)->seeq = priv(dev)->base + data->base_offset; | |
805 | dev->irq = ec->irq; | |
806 | ||
807 | ether3_addr(dev->dev_addr, ec); | |
808 | ||
809 | init_timer(&priv(dev)->timer); | |
810 | ||
811 | /* Reset card... | |
812 | */ | |
813 | ether3_outb(0x80, REG_CONFIG2 + 4); | |
814 | bus_type = BUS_UNKNOWN; | |
815 | udelay(4); | |
816 | ||
817 | /* Test using Receive Pointer (16-bit register) to find out | |
818 | * how the ether3 is connected to the bus... | |
819 | */ | |
820 | if (ether3_probe_bus_8(dev, 0x100) && | |
821 | ether3_probe_bus_8(dev, 0x201)) | |
822 | bus_type = BUS_8; | |
823 | ||
824 | if (bus_type == BUS_UNKNOWN && | |
825 | ether3_probe_bus_16(dev, 0x101) && | |
826 | ether3_probe_bus_16(dev, 0x201)) | |
827 | bus_type = BUS_16; | |
828 | ||
829 | switch (bus_type) { | |
830 | case BUS_UNKNOWN: | |
831 | printk(KERN_ERR "%s: unable to identify bus width\n", dev->name); | |
832 | ret = -ENODEV; | |
833 | goto free; | |
834 | ||
835 | case BUS_8: | |
836 | printk(KERN_ERR "%s: %s found, but is an unsupported " | |
837 | "8-bit card\n", dev->name, data->name); | |
838 | ret = -ENODEV; | |
839 | goto free; | |
840 | ||
841 | default: | |
842 | break; | |
843 | } | |
844 | ||
845 | if (ether3_init_2(dev)) { | |
846 | ret = -ENODEV; | |
847 | goto free; | |
848 | } | |
849 | ||
850 | dev->open = ether3_open; | |
851 | dev->stop = ether3_close; | |
852 | dev->hard_start_xmit = ether3_sendpacket; | |
853 | dev->get_stats = ether3_getstats; | |
854 | dev->set_multicast_list = ether3_setmulticastlist; | |
855 | dev->tx_timeout = ether3_timeout; | |
856 | dev->watchdog_timeo = 5 * HZ / 100; | |
857 | ||
858 | ret = register_netdev(dev); | |
859 | if (ret) | |
860 | goto free; | |
861 | ||
0795af57 JP |
862 | printk("%s: %s in slot %d, %s\n", |
863 | dev->name, data->name, ec->slot_no, print_mac(mac, dev->dev_addr)); | |
1da177e4 LT |
864 | |
865 | ecard_set_drvdata(ec, dev); | |
866 | return 0; | |
867 | ||
868 | free: | |
1da177e4 LT |
869 | free_netdev(dev); |
870 | release: | |
871 | ecard_release_resources(ec); | |
872 | out: | |
873 | return ret; | |
874 | } | |
875 | ||
876 | static void __devexit ether3_remove(struct expansion_card *ec) | |
877 | { | |
878 | struct net_device *dev = ecard_get_drvdata(ec); | |
879 | ||
880 | ecard_set_drvdata(ec, NULL); | |
881 | ||
882 | unregister_netdev(dev); | |
1da177e4 LT |
883 | free_netdev(dev); |
884 | ecard_release_resources(ec); | |
885 | } | |
886 | ||
887 | static struct ether3_data ether3 = { | |
888 | .name = "ether3", | |
889 | .base_offset = 0, | |
890 | }; | |
891 | ||
892 | static struct ether3_data etherb = { | |
893 | .name = "etherb", | |
894 | .base_offset = 0x800, | |
895 | }; | |
896 | ||
897 | static const struct ecard_id ether3_ids[] = { | |
898 | { MANU_ANT2, PROD_ANT_ETHER3, ðer3 }, | |
899 | { MANU_ANT, PROD_ANT_ETHER3, ðer3 }, | |
900 | { MANU_ANT, PROD_ANT_ETHERB, ðerb }, | |
901 | { 0xffff, 0xffff } | |
902 | }; | |
903 | ||
904 | static struct ecard_driver ether3_driver = { | |
905 | .probe = ether3_probe, | |
906 | .remove = __devexit_p(ether3_remove), | |
907 | .id_table = ether3_ids, | |
908 | .drv = { | |
909 | .name = "ether3", | |
910 | }, | |
911 | }; | |
912 | ||
913 | static int __init ether3_init(void) | |
914 | { | |
915 | return ecard_register_driver(ðer3_driver); | |
916 | } | |
917 | ||
918 | static void __exit ether3_exit(void) | |
919 | { | |
920 | ecard_remove_driver(ðer3_driver); | |
921 | } | |
922 | ||
923 | module_init(ether3_init); | |
924 | module_exit(ether3_exit); | |
925 | ||
926 | MODULE_LICENSE("GPL"); |