Commit | Line | Data |
---|---|---|
02f26ecf MR |
1 | // SPDX-License-Identifier: GPL-2.0 |
2 | /* | |
3 | * Marvell NAND flash controller driver | |
4 | * | |
5 | * Copyright (C) 2017 Marvell | |
6 | * Author: Miquel RAYNAL <miquel.raynal@free-electrons.com> | |
7 | * | |
33c1c5fe MR |
8 | * |
9 | * This NAND controller driver handles two versions of the hardware, | |
10 | * one is called NFCv1 and is available on PXA SoCs and the other is | |
11 | * called NFCv2 and is available on Armada SoCs. | |
12 | * | |
13 | * The main visible difference is that NFCv1 only has Hamming ECC | |
14 | * capabilities, while NFCv2 also embeds a BCH ECC engine. Also, DMA | |
15 | * is not used with NFCv2. | |
16 | * | |
17 | * The ECC layouts are depicted in details in Marvell AN-379, but here | |
18 | * is a brief description. | |
19 | * | |
20 | * When using Hamming, the data is split in 512B chunks (either 1, 2 | |
21 | * or 4) and each chunk will have its own ECC "digest" of 6B at the | |
22 | * beginning of the OOB area and eventually the remaining free OOB | |
23 | * bytes (also called "spare" bytes in the driver). This engine | |
24 | * corrects up to 1 bit per chunk and detects reliably an error if | |
25 | * there are at most 2 bitflips. Here is the page layout used by the | |
26 | * controller when Hamming is chosen: | |
27 | * | |
28 | * +-------------------------------------------------------------+ | |
29 | * | Data 1 | ... | Data N | ECC 1 | ... | ECCN | Free OOB bytes | | |
30 | * +-------------------------------------------------------------+ | |
31 | * | |
32 | * When using the BCH engine, there are N identical (data + free OOB + | |
33 | * ECC) sections and potentially an extra one to deal with | |
34 | * configurations where the chosen (data + free OOB + ECC) sizes do | |
35 | * not align with the page (data + OOB) size. ECC bytes are always | |
36 | * 30B per ECC chunk. Here is the page layout used by the controller | |
37 | * when BCH is chosen: | |
38 | * | |
39 | * +----------------------------------------- | |
40 | * | Data 1 | Free OOB bytes 1 | ECC 1 | ... | |
41 | * +----------------------------------------- | |
42 | * | |
43 | * ------------------------------------------- | |
44 | * ... | Data N | Free OOB bytes N | ECC N | | |
45 | * ------------------------------------------- | |
46 | * | |
47 | * --------------------------------------------+ | |
48 | * Last Data | Last Free OOB bytes | Last ECC | | |
49 | * --------------------------------------------+ | |
50 | * | |
51 | * In both cases, the layout seen by the user is always: all data | |
52 | * first, then all free OOB bytes and finally all ECC bytes. With BCH, | |
53 | * ECC bytes are 30B long and are padded with 0xFF to align on 32 | |
54 | * bytes. | |
55 | * | |
56 | * The controller has certain limitations that are handled by the | |
57 | * driver: | |
58 | * - It can only read 2k at a time. To overcome this limitation, the | |
59 | * driver issues data cycles on the bus, without issuing new | |
60 | * CMD + ADDR cycles. The Marvell term is "naked" operations. | |
61 | * - The ECC strength in BCH mode cannot be tuned. It is fixed 16 | |
62 | * bits. What can be tuned is the ECC block size as long as it | |
63 | * stays between 512B and 2kiB. It's usually chosen based on the | |
64 | * chip ECC requirements. For instance, using 2kiB ECC chunks | |
65 | * provides 4b/512B correctability. | |
66 | * - The controller will always treat data bytes, free OOB bytes | |
67 | * and ECC bytes in that order, no matter what the real layout is | |
68 | * (which is usually all data then all OOB bytes). The | |
69 | * marvell_nfc_layouts array below contains the currently | |
70 | * supported layouts. | |
71 | * - Because of these weird layouts, the Bad Block Markers can be | |
72 | * located in data section. In this case, the NAND_BBT_NO_OOB_BBM | |
73 | * option must be set to prevent scanning/writing bad block | |
74 | * markers. | |
02f26ecf MR |
75 | */ |
76 | ||
77 | #include <linux/module.h> | |
78 | #include <linux/clk.h> | |
79 | #include <linux/mtd/rawnand.h> | |
80 | #include <linux/of_platform.h> | |
81 | #include <linux/iopoll.h> | |
82 | #include <linux/interrupt.h> | |
83 | #include <linux/slab.h> | |
84 | #include <linux/mfd/syscon.h> | |
85 | #include <linux/regmap.h> | |
86 | #include <asm/unaligned.h> | |
87 | ||
88 | #include <linux/dmaengine.h> | |
89 | #include <linux/dma-mapping.h> | |
90 | #include <linux/dma/pxa-dma.h> | |
91 | #include <linux/platform_data/mtd-nand-pxa3xx.h> | |
92 | ||
93 | /* Data FIFO granularity, FIFO reads/writes must be a multiple of this length */ | |
94 | #define FIFO_DEPTH 8 | |
95 | #define FIFO_REP(x) (x / sizeof(u32)) | |
96 | #define BCH_SEQ_READS (32 / FIFO_DEPTH) | |
97 | /* NFC does not support transfers of larger chunks at a time */ | |
98 | #define MAX_CHUNK_SIZE 2112 | |
99 | /* NFCv1 cannot read more that 7 bytes of ID */ | |
100 | #define NFCV1_READID_LEN 7 | |
101 | /* Polling is done at a pace of POLL_PERIOD us until POLL_TIMEOUT is reached */ | |
102 | #define POLL_PERIOD 0 | |
103 | #define POLL_TIMEOUT 100000 | |
104 | /* Interrupt maximum wait period in ms */ | |
105 | #define IRQ_TIMEOUT 1000 | |
106 | /* Latency in clock cycles between SoC pins and NFC logic */ | |
107 | #define MIN_RD_DEL_CNT 3 | |
108 | /* Maximum number of contiguous address cycles */ | |
109 | #define MAX_ADDRESS_CYC_NFCV1 5 | |
110 | #define MAX_ADDRESS_CYC_NFCV2 7 | |
111 | /* System control registers/bits to enable the NAND controller on some SoCs */ | |
112 | #define GENCONF_SOC_DEVICE_MUX 0x208 | |
113 | #define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0) | |
114 | #define GENCONF_SOC_DEVICE_MUX_ECC_CLK_RST BIT(20) | |
115 | #define GENCONF_SOC_DEVICE_MUX_ECC_CORE_RST BIT(21) | |
116 | #define GENCONF_SOC_DEVICE_MUX_NFC_INT_EN BIT(25) | |
117 | #define GENCONF_CLK_GATING_CTRL 0x220 | |
118 | #define GENCONF_CLK_GATING_CTRL_ND_GATE BIT(2) | |
119 | #define GENCONF_ND_CLK_CTRL 0x700 | |
120 | #define GENCONF_ND_CLK_CTRL_EN BIT(0) | |
121 | ||
122 | /* NAND controller data flash control register */ | |
123 | #define NDCR 0x00 | |
124 | #define NDCR_ALL_INT GENMASK(11, 0) | |
125 | #define NDCR_CS1_CMDDM BIT(7) | |
126 | #define NDCR_CS0_CMDDM BIT(8) | |
127 | #define NDCR_RDYM BIT(11) | |
128 | #define NDCR_ND_ARB_EN BIT(12) | |
129 | #define NDCR_RA_START BIT(15) | |
130 | #define NDCR_RD_ID_CNT(x) (min_t(unsigned int, x, 0x7) << 16) | |
131 | #define NDCR_PAGE_SZ(x) (x >= 2048 ? BIT(24) : 0) | |
132 | #define NDCR_DWIDTH_M BIT(26) | |
133 | #define NDCR_DWIDTH_C BIT(27) | |
134 | #define NDCR_ND_RUN BIT(28) | |
135 | #define NDCR_DMA_EN BIT(29) | |
136 | #define NDCR_ECC_EN BIT(30) | |
137 | #define NDCR_SPARE_EN BIT(31) | |
138 | #define NDCR_GENERIC_FIELDS_MASK (~(NDCR_RA_START | NDCR_PAGE_SZ(2048) | \ | |
139 | NDCR_DWIDTH_M | NDCR_DWIDTH_C)) | |
140 | ||
141 | /* NAND interface timing parameter 0 register */ | |
142 | #define NDTR0 0x04 | |
143 | #define NDTR0_TRP(x) ((min_t(unsigned int, x, 0xF) & 0x7) << 0) | |
144 | #define NDTR0_TRH(x) (min_t(unsigned int, x, 0x7) << 3) | |
145 | #define NDTR0_ETRP(x) ((min_t(unsigned int, x, 0xF) & 0x8) << 3) | |
146 | #define NDTR0_SEL_NRE_EDGE BIT(7) | |
147 | #define NDTR0_TWP(x) (min_t(unsigned int, x, 0x7) << 8) | |
148 | #define NDTR0_TWH(x) (min_t(unsigned int, x, 0x7) << 11) | |
149 | #define NDTR0_TCS(x) (min_t(unsigned int, x, 0x7) << 16) | |
150 | #define NDTR0_TCH(x) (min_t(unsigned int, x, 0x7) << 19) | |
151 | #define NDTR0_RD_CNT_DEL(x) (min_t(unsigned int, x, 0xF) << 22) | |
152 | #define NDTR0_SELCNTR BIT(26) | |
153 | #define NDTR0_TADL(x) (min_t(unsigned int, x, 0x1F) << 27) | |
154 | ||
155 | /* NAND interface timing parameter 1 register */ | |
156 | #define NDTR1 0x0C | |
157 | #define NDTR1_TAR(x) (min_t(unsigned int, x, 0xF) << 0) | |
158 | #define NDTR1_TWHR(x) (min_t(unsigned int, x, 0xF) << 4) | |
159 | #define NDTR1_TRHW(x) (min_t(unsigned int, x / 16, 0x3) << 8) | |
160 | #define NDTR1_PRESCALE BIT(14) | |
161 | #define NDTR1_WAIT_MODE BIT(15) | |
162 | #define NDTR1_TR(x) (min_t(unsigned int, x, 0xFFFF) << 16) | |
163 | ||
164 | /* NAND controller status register */ | |
165 | #define NDSR 0x14 | |
166 | #define NDSR_WRCMDREQ BIT(0) | |
167 | #define NDSR_RDDREQ BIT(1) | |
168 | #define NDSR_WRDREQ BIT(2) | |
169 | #define NDSR_CORERR BIT(3) | |
170 | #define NDSR_UNCERR BIT(4) | |
171 | #define NDSR_CMDD(cs) BIT(8 - cs) | |
172 | #define NDSR_RDY(rb) BIT(11 + rb) | |
173 | #define NDSR_ERRCNT(x) ((x >> 16) & 0x1F) | |
174 | ||
175 | /* NAND ECC control register */ | |
176 | #define NDECCCTRL 0x28 | |
177 | #define NDECCCTRL_BCH_EN BIT(0) | |
178 | ||
179 | /* NAND controller data buffer register */ | |
180 | #define NDDB 0x40 | |
181 | ||
182 | /* NAND controller command buffer 0 register */ | |
183 | #define NDCB0 0x48 | |
184 | #define NDCB0_CMD1(x) ((x & 0xFF) << 0) | |
185 | #define NDCB0_CMD2(x) ((x & 0xFF) << 8) | |
186 | #define NDCB0_ADDR_CYC(x) ((x & 0x7) << 16) | |
187 | #define NDCB0_ADDR_GET_NUM_CYC(x) (((x) >> 16) & 0x7) | |
188 | #define NDCB0_DBC BIT(19) | |
189 | #define NDCB0_CMD_TYPE(x) ((x & 0x7) << 21) | |
190 | #define NDCB0_CSEL BIT(24) | |
191 | #define NDCB0_RDY_BYP BIT(27) | |
192 | #define NDCB0_LEN_OVRD BIT(28) | |
193 | #define NDCB0_CMD_XTYPE(x) ((x & 0x7) << 29) | |
194 | ||
195 | /* NAND controller command buffer 1 register */ | |
196 | #define NDCB1 0x4C | |
197 | #define NDCB1_COLS(x) ((x & 0xFFFF) << 0) | |
198 | #define NDCB1_ADDRS_PAGE(x) (x << 16) | |
199 | ||
200 | /* NAND controller command buffer 2 register */ | |
201 | #define NDCB2 0x50 | |
202 | #define NDCB2_ADDR5_PAGE(x) (((x >> 16) & 0xFF) << 0) | |
203 | #define NDCB2_ADDR5_CYC(x) ((x & 0xFF) << 0) | |
204 | ||
205 | /* NAND controller command buffer 3 register */ | |
206 | #define NDCB3 0x54 | |
207 | #define NDCB3_ADDR6_CYC(x) ((x & 0xFF) << 16) | |
208 | #define NDCB3_ADDR7_CYC(x) ((x & 0xFF) << 24) | |
209 | ||
210 | /* NAND controller command buffer 0 register 'type' and 'xtype' fields */ | |
211 | #define TYPE_READ 0 | |
212 | #define TYPE_WRITE 1 | |
213 | #define TYPE_ERASE 2 | |
214 | #define TYPE_READ_ID 3 | |
215 | #define TYPE_STATUS 4 | |
216 | #define TYPE_RESET 5 | |
217 | #define TYPE_NAKED_CMD 6 | |
218 | #define TYPE_NAKED_ADDR 7 | |
219 | #define TYPE_MASK 7 | |
220 | #define XTYPE_MONOLITHIC_RW 0 | |
221 | #define XTYPE_LAST_NAKED_RW 1 | |
222 | #define XTYPE_FINAL_COMMAND 3 | |
223 | #define XTYPE_READ 4 | |
224 | #define XTYPE_WRITE_DISPATCH 4 | |
225 | #define XTYPE_NAKED_RW 5 | |
226 | #define XTYPE_COMMAND_DISPATCH 6 | |
227 | #define XTYPE_MASK 7 | |
228 | ||
229 | /** | |
230 | * Marvell ECC engine works differently than the others, in order to limit the | |
231 | * size of the IP, hardware engineers chose to set a fixed strength at 16 bits | |
232 | * per subpage, and depending on a the desired strength needed by the NAND chip, | |
233 | * a particular layout mixing data/spare/ecc is defined, with a possible last | |
234 | * chunk smaller that the others. | |
235 | * | |
236 | * @writesize: Full page size on which the layout applies | |
237 | * @chunk: Desired ECC chunk size on which the layout applies | |
238 | * @strength: Desired ECC strength (per chunk size bytes) on which the | |
239 | * layout applies | |
240 | * @nchunks: Total number of chunks | |
241 | * @full_chunk_cnt: Number of full-sized chunks, which is the number of | |
242 | * repetitions of the pattern: | |
243 | * (data_bytes + spare_bytes + ecc_bytes). | |
244 | * @data_bytes: Number of data bytes per chunk | |
245 | * @spare_bytes: Number of spare bytes per chunk | |
246 | * @ecc_bytes: Number of ecc bytes per chunk | |
247 | * @last_data_bytes: Number of data bytes in the last chunk | |
248 | * @last_spare_bytes: Number of spare bytes in the last chunk | |
249 | * @last_ecc_bytes: Number of ecc bytes in the last chunk | |
250 | */ | |
251 | struct marvell_hw_ecc_layout { | |
252 | /* Constraints */ | |
253 | int writesize; | |
254 | int chunk; | |
255 | int strength; | |
256 | /* Corresponding layout */ | |
257 | int nchunks; | |
258 | int full_chunk_cnt; | |
259 | int data_bytes; | |
260 | int spare_bytes; | |
261 | int ecc_bytes; | |
262 | int last_data_bytes; | |
263 | int last_spare_bytes; | |
264 | int last_ecc_bytes; | |
265 | }; | |
266 | ||
267 | #define MARVELL_LAYOUT(ws, dc, ds, nc, fcc, db, sb, eb, ldb, lsb, leb) \ | |
268 | { \ | |
269 | .writesize = ws, \ | |
270 | .chunk = dc, \ | |
271 | .strength = ds, \ | |
272 | .nchunks = nc, \ | |
273 | .full_chunk_cnt = fcc, \ | |
274 | .data_bytes = db, \ | |
275 | .spare_bytes = sb, \ | |
276 | .ecc_bytes = eb, \ | |
277 | .last_data_bytes = ldb, \ | |
278 | .last_spare_bytes = lsb, \ | |
279 | .last_ecc_bytes = leb, \ | |
280 | } | |
281 | ||
282 | /* Layouts explained in AN-379_Marvell_SoC_NFC_ECC */ | |
283 | static const struct marvell_hw_ecc_layout marvell_nfc_layouts[] = { | |
284 | MARVELL_LAYOUT( 512, 512, 1, 1, 1, 512, 8, 8, 0, 0, 0), | |
285 | MARVELL_LAYOUT( 2048, 512, 1, 1, 1, 2048, 40, 24, 0, 0, 0), | |
286 | MARVELL_LAYOUT( 2048, 512, 4, 1, 1, 2048, 32, 30, 0, 0, 0), | |
287 | MARVELL_LAYOUT( 4096, 512, 4, 2, 2, 2048, 32, 30, 0, 0, 0), | |
288 | MARVELL_LAYOUT( 4096, 512, 8, 5, 4, 1024, 0, 30, 0, 64, 30), | |
289 | }; | |
290 | ||
291 | /** | |
292 | * The Nand Flash Controller has up to 4 CE and 2 RB pins. The CE selection | |
293 | * is made by a field in NDCB0 register, and in another field in NDCB2 register. | |
294 | * The datasheet describes the logic with an error: ADDR5 field is once | |
295 | * declared at the beginning of NDCB2, and another time at its end. Because the | |
296 | * ADDR5 field of NDCB2 may be used by other bytes, it would be more logical | |
297 | * to use the last bit of this field instead of the first ones. | |
298 | * | |
299 | * @cs: Wanted CE lane. | |
300 | * @ndcb0_csel: Value of the NDCB0 register with or without the flag | |
301 | * selecting the wanted CE lane. This is set once when | |
302 | * the Device Tree is probed. | |
303 | * @rb: Ready/Busy pin for the flash chip | |
304 | */ | |
305 | struct marvell_nand_chip_sel { | |
306 | unsigned int cs; | |
307 | u32 ndcb0_csel; | |
308 | unsigned int rb; | |
309 | }; | |
310 | ||
311 | /** | |
312 | * NAND chip structure: stores NAND chip device related information | |
313 | * | |
314 | * @chip: Base NAND chip structure | |
315 | * @node: Used to store NAND chips into a list | |
316 | * @layout NAND layout when using hardware ECC | |
317 | * @ndcr: Controller register value for this NAND chip | |
318 | * @ndtr0: Timing registers 0 value for this NAND chip | |
319 | * @ndtr1: Timing registers 1 value for this NAND chip | |
320 | * @selected_die: Current active CS | |
321 | * @nsels: Number of CS lines required by the NAND chip | |
322 | * @sels: Array of CS lines descriptions | |
323 | */ | |
324 | struct marvell_nand_chip { | |
325 | struct nand_chip chip; | |
326 | struct list_head node; | |
327 | const struct marvell_hw_ecc_layout *layout; | |
328 | u32 ndcr; | |
329 | u32 ndtr0; | |
330 | u32 ndtr1; | |
331 | int addr_cyc; | |
332 | int selected_die; | |
333 | unsigned int nsels; | |
334 | struct marvell_nand_chip_sel sels[0]; | |
335 | }; | |
336 | ||
337 | static inline struct marvell_nand_chip *to_marvell_nand(struct nand_chip *chip) | |
338 | { | |
339 | return container_of(chip, struct marvell_nand_chip, chip); | |
340 | } | |
341 | ||
342 | static inline struct marvell_nand_chip_sel *to_nand_sel(struct marvell_nand_chip | |
343 | *nand) | |
344 | { | |
345 | return &nand->sels[nand->selected_die]; | |
346 | } | |
347 | ||
348 | /** | |
349 | * NAND controller capabilities for distinction between compatible strings | |
350 | * | |
351 | * @max_cs_nb: Number of Chip Select lines available | |
352 | * @max_rb_nb: Number of Ready/Busy lines available | |
353 | * @need_system_controller: Indicates if the SoC needs to have access to the | |
354 | * system controller (ie. to enable the NAND controller) | |
355 | * @legacy_of_bindings: Indicates if DT parsing must be done using the old | |
356 | * fashion way | |
357 | * @is_nfcv2: NFCv2 has numerous enhancements compared to NFCv1, ie. | |
358 | * BCH error detection and correction algorithm, | |
359 | * NDCB3 register has been added | |
360 | * @use_dma: Use dma for data transfers | |
361 | */ | |
362 | struct marvell_nfc_caps { | |
363 | unsigned int max_cs_nb; | |
364 | unsigned int max_rb_nb; | |
365 | bool need_system_controller; | |
366 | bool legacy_of_bindings; | |
367 | bool is_nfcv2; | |
368 | bool use_dma; | |
369 | }; | |
370 | ||
371 | /** | |
372 | * NAND controller structure: stores Marvell NAND controller information | |
373 | * | |
374 | * @controller: Base controller structure | |
375 | * @dev: Parent device (used to print error messages) | |
376 | * @regs: NAND controller registers | |
6b6de654 | 377 | * @core_clk: Core clock |
961ba15c | 378 | * @reg_clk: Regiters clock |
02f26ecf MR |
379 | * @complete: Completion object to wait for NAND controller events |
380 | * @assigned_cs: Bitmask describing already assigned CS lines | |
381 | * @chips: List containing all the NAND chips attached to | |
382 | * this NAND controller | |
383 | * @caps: NAND controller capabilities for each compatible string | |
384 | * @dma_chan: DMA channel (NFCv1 only) | |
385 | * @dma_buf: 32-bit aligned buffer for DMA transfers (NFCv1 only) | |
386 | */ | |
387 | struct marvell_nfc { | |
7da45139 | 388 | struct nand_controller controller; |
02f26ecf MR |
389 | struct device *dev; |
390 | void __iomem *regs; | |
6b6de654 | 391 | struct clk *core_clk; |
961ba15c | 392 | struct clk *reg_clk; |
02f26ecf MR |
393 | struct completion complete; |
394 | unsigned long assigned_cs; | |
395 | struct list_head chips; | |
396 | struct nand_chip *selected_chip; | |
397 | const struct marvell_nfc_caps *caps; | |
398 | ||
399 | /* DMA (NFCv1 only) */ | |
400 | bool use_dma; | |
401 | struct dma_chan *dma_chan; | |
402 | u8 *dma_buf; | |
403 | }; | |
404 | ||
7da45139 | 405 | static inline struct marvell_nfc *to_marvell_nfc(struct nand_controller *ctrl) |
02f26ecf MR |
406 | { |
407 | return container_of(ctrl, struct marvell_nfc, controller); | |
408 | } | |
409 | ||
410 | /** | |
411 | * NAND controller timings expressed in NAND Controller clock cycles | |
412 | * | |
413 | * @tRP: ND_nRE pulse width | |
414 | * @tRH: ND_nRE high duration | |
415 | * @tWP: ND_nWE pulse time | |
416 | * @tWH: ND_nWE high duration | |
417 | * @tCS: Enable signal setup time | |
418 | * @tCH: Enable signal hold time | |
419 | * @tADL: Address to write data delay | |
420 | * @tAR: ND_ALE low to ND_nRE low delay | |
421 | * @tWHR: ND_nWE high to ND_nRE low for status read | |
422 | * @tRHW: ND_nRE high duration, read to write delay | |
423 | * @tR: ND_nWE high to ND_nRE low for read | |
424 | */ | |
425 | struct marvell_nfc_timings { | |
426 | /* NDTR0 fields */ | |
427 | unsigned int tRP; | |
428 | unsigned int tRH; | |
429 | unsigned int tWP; | |
430 | unsigned int tWH; | |
431 | unsigned int tCS; | |
432 | unsigned int tCH; | |
433 | unsigned int tADL; | |
434 | /* NDTR1 fields */ | |
435 | unsigned int tAR; | |
436 | unsigned int tWHR; | |
437 | unsigned int tRHW; | |
438 | unsigned int tR; | |
439 | }; | |
440 | ||
441 | /** | |
442 | * Derives a duration in numbers of clock cycles. | |
443 | * | |
444 | * @ps: Duration in pico-seconds | |
445 | * @period_ns: Clock period in nano-seconds | |
446 | * | |
447 | * Convert the duration in nano-seconds, then divide by the period and | |
448 | * return the number of clock periods. | |
449 | */ | |
450 | #define TO_CYCLES(ps, period_ns) (DIV_ROUND_UP(ps / 1000, period_ns)) | |
07ad5a72 MR |
451 | #define TO_CYCLES64(ps, period_ns) (DIV_ROUND_UP_ULL(div_u64(ps, 1000), \ |
452 | period_ns)) | |
02f26ecf MR |
453 | |
454 | /** | |
455 | * NAND driver structure filled during the parsing of the ->exec_op() subop | |
456 | * subset of instructions. | |
457 | * | |
458 | * @ndcb: Array of values written to NDCBx registers | |
459 | * @cle_ale_delay_ns: Optional delay after the last CMD or ADDR cycle | |
460 | * @rdy_timeout_ms: Timeout for waits on Ready/Busy pin | |
461 | * @rdy_delay_ns: Optional delay after waiting for the RB pin | |
462 | * @data_delay_ns: Optional delay after the data xfer | |
463 | * @data_instr_idx: Index of the data instruction in the subop | |
464 | * @data_instr: Pointer to the data instruction in the subop | |
465 | */ | |
466 | struct marvell_nfc_op { | |
467 | u32 ndcb[4]; | |
468 | unsigned int cle_ale_delay_ns; | |
469 | unsigned int rdy_timeout_ms; | |
470 | unsigned int rdy_delay_ns; | |
471 | unsigned int data_delay_ns; | |
472 | unsigned int data_instr_idx; | |
473 | const struct nand_op_instr *data_instr; | |
474 | }; | |
475 | ||
476 | /* | |
477 | * Internal helper to conditionnally apply a delay (from the above structure, | |
478 | * most of the time). | |
479 | */ | |
480 | static void cond_delay(unsigned int ns) | |
481 | { | |
482 | if (!ns) | |
483 | return; | |
484 | ||
485 | if (ns < 10000) | |
486 | ndelay(ns); | |
487 | else | |
488 | udelay(DIV_ROUND_UP(ns, 1000)); | |
489 | } | |
490 | ||
491 | /* | |
492 | * The controller has many flags that could generate interrupts, most of them | |
493 | * are disabled and polling is used. For the very slow signals, using interrupts | |
494 | * may relax the CPU charge. | |
495 | */ | |
496 | static void marvell_nfc_disable_int(struct marvell_nfc *nfc, u32 int_mask) | |
497 | { | |
498 | u32 reg; | |
499 | ||
500 | /* Writing 1 disables the interrupt */ | |
501 | reg = readl_relaxed(nfc->regs + NDCR); | |
502 | writel_relaxed(reg | int_mask, nfc->regs + NDCR); | |
503 | } | |
504 | ||
505 | static void marvell_nfc_enable_int(struct marvell_nfc *nfc, u32 int_mask) | |
506 | { | |
507 | u32 reg; | |
508 | ||
509 | /* Writing 0 enables the interrupt */ | |
510 | reg = readl_relaxed(nfc->regs + NDCR); | |
511 | writel_relaxed(reg & ~int_mask, nfc->regs + NDCR); | |
512 | } | |
513 | ||
514 | static void marvell_nfc_clear_int(struct marvell_nfc *nfc, u32 int_mask) | |
515 | { | |
516 | writel_relaxed(int_mask, nfc->regs + NDSR); | |
517 | } | |
518 | ||
519 | static void marvell_nfc_force_byte_access(struct nand_chip *chip, | |
520 | bool force_8bit) | |
521 | { | |
522 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
523 | u32 ndcr; | |
524 | ||
525 | /* | |
526 | * Callers of this function do not verify if the NAND is using a 16-bit | |
527 | * an 8-bit bus for normal operations, so we need to take care of that | |
528 | * here by leaving the configuration unchanged if the NAND does not have | |
529 | * the NAND_BUSWIDTH_16 flag set. | |
530 | */ | |
531 | if (!(chip->options & NAND_BUSWIDTH_16)) | |
532 | return; | |
533 | ||
534 | ndcr = readl_relaxed(nfc->regs + NDCR); | |
535 | ||
536 | if (force_8bit) | |
537 | ndcr &= ~(NDCR_DWIDTH_M | NDCR_DWIDTH_C); | |
538 | else | |
539 | ndcr |= NDCR_DWIDTH_M | NDCR_DWIDTH_C; | |
540 | ||
541 | writel_relaxed(ndcr, nfc->regs + NDCR); | |
542 | } | |
543 | ||
544 | static int marvell_nfc_wait_ndrun(struct nand_chip *chip) | |
545 | { | |
546 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
547 | u32 val; | |
548 | int ret; | |
549 | ||
550 | /* | |
551 | * The command is being processed, wait for the ND_RUN bit to be | |
552 | * cleared by the NFC. If not, we must clear it by hand. | |
553 | */ | |
554 | ret = readl_relaxed_poll_timeout(nfc->regs + NDCR, val, | |
555 | (val & NDCR_ND_RUN) == 0, | |
556 | POLL_PERIOD, POLL_TIMEOUT); | |
557 | if (ret) { | |
558 | dev_err(nfc->dev, "Timeout on NAND controller run mode\n"); | |
559 | writel_relaxed(readl(nfc->regs + NDCR) & ~NDCR_ND_RUN, | |
560 | nfc->regs + NDCR); | |
561 | return ret; | |
562 | } | |
563 | ||
564 | return 0; | |
565 | } | |
566 | ||
567 | /* | |
568 | * Any time a command has to be sent to the controller, the following sequence | |
569 | * has to be followed: | |
570 | * - call marvell_nfc_prepare_cmd() | |
571 | * -> activate the ND_RUN bit that will kind of 'start a job' | |
572 | * -> wait the signal indicating the NFC is waiting for a command | |
573 | * - send the command (cmd and address cycles) | |
574 | * - enventually send or receive the data | |
575 | * - call marvell_nfc_end_cmd() with the corresponding flag | |
576 | * -> wait the flag to be triggered or cancel the job with a timeout | |
577 | * | |
578 | * The following helpers are here to factorize the code a bit so that | |
579 | * specialized functions responsible for executing the actual NAND | |
580 | * operations do not have to replicate the same code blocks. | |
581 | */ | |
582 | static int marvell_nfc_prepare_cmd(struct nand_chip *chip) | |
583 | { | |
584 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
585 | u32 ndcr, val; | |
586 | int ret; | |
587 | ||
588 | /* Poll ND_RUN and clear NDSR before issuing any command */ | |
589 | ret = marvell_nfc_wait_ndrun(chip); | |
590 | if (ret) { | |
a76497dc | 591 | dev_err(nfc->dev, "Last operation did not succeed\n"); |
02f26ecf MR |
592 | return ret; |
593 | } | |
594 | ||
595 | ndcr = readl_relaxed(nfc->regs + NDCR); | |
596 | writel_relaxed(readl(nfc->regs + NDSR), nfc->regs + NDSR); | |
597 | ||
598 | /* Assert ND_RUN bit and wait the NFC to be ready */ | |
599 | writel_relaxed(ndcr | NDCR_ND_RUN, nfc->regs + NDCR); | |
600 | ret = readl_relaxed_poll_timeout(nfc->regs + NDSR, val, | |
601 | val & NDSR_WRCMDREQ, | |
602 | POLL_PERIOD, POLL_TIMEOUT); | |
603 | if (ret) { | |
604 | dev_err(nfc->dev, "Timeout on WRCMDRE\n"); | |
605 | return -ETIMEDOUT; | |
606 | } | |
607 | ||
608 | /* Command may be written, clear WRCMDREQ status bit */ | |
609 | writel_relaxed(NDSR_WRCMDREQ, nfc->regs + NDSR); | |
610 | ||
611 | return 0; | |
612 | } | |
613 | ||
614 | static void marvell_nfc_send_cmd(struct nand_chip *chip, | |
615 | struct marvell_nfc_op *nfc_op) | |
616 | { | |
617 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
618 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
619 | ||
620 | dev_dbg(nfc->dev, "\nNDCR: 0x%08x\n" | |
621 | "NDCB0: 0x%08x\nNDCB1: 0x%08x\nNDCB2: 0x%08x\nNDCB3: 0x%08x\n", | |
622 | (u32)readl_relaxed(nfc->regs + NDCR), nfc_op->ndcb[0], | |
623 | nfc_op->ndcb[1], nfc_op->ndcb[2], nfc_op->ndcb[3]); | |
624 | ||
625 | writel_relaxed(to_nand_sel(marvell_nand)->ndcb0_csel | nfc_op->ndcb[0], | |
626 | nfc->regs + NDCB0); | |
627 | writel_relaxed(nfc_op->ndcb[1], nfc->regs + NDCB0); | |
628 | writel(nfc_op->ndcb[2], nfc->regs + NDCB0); | |
629 | ||
630 | /* | |
631 | * Write NDCB0 four times only if LEN_OVRD is set or if ADDR6 or ADDR7 | |
632 | * fields are used (only available on NFCv2). | |
633 | */ | |
634 | if (nfc_op->ndcb[0] & NDCB0_LEN_OVRD || | |
635 | NDCB0_ADDR_GET_NUM_CYC(nfc_op->ndcb[0]) >= 6) { | |
636 | if (!WARN_ON_ONCE(!nfc->caps->is_nfcv2)) | |
637 | writel(nfc_op->ndcb[3], nfc->regs + NDCB0); | |
638 | } | |
639 | } | |
640 | ||
641 | static int marvell_nfc_end_cmd(struct nand_chip *chip, int flag, | |
642 | const char *label) | |
643 | { | |
644 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
645 | u32 val; | |
646 | int ret; | |
647 | ||
648 | ret = readl_relaxed_poll_timeout(nfc->regs + NDSR, val, | |
649 | val & flag, | |
650 | POLL_PERIOD, POLL_TIMEOUT); | |
651 | ||
652 | if (ret) { | |
653 | dev_err(nfc->dev, "Timeout on %s (NDSR: 0x%08x)\n", | |
654 | label, val); | |
655 | if (nfc->dma_chan) | |
656 | dmaengine_terminate_all(nfc->dma_chan); | |
657 | return ret; | |
658 | } | |
659 | ||
660 | /* | |
661 | * DMA function uses this helper to poll on CMDD bits without wanting | |
662 | * them to be cleared. | |
663 | */ | |
664 | if (nfc->use_dma && (readl_relaxed(nfc->regs + NDCR) & NDCR_DMA_EN)) | |
665 | return 0; | |
666 | ||
667 | writel_relaxed(flag, nfc->regs + NDSR); | |
668 | ||
669 | return 0; | |
670 | } | |
671 | ||
672 | static int marvell_nfc_wait_cmdd(struct nand_chip *chip) | |
673 | { | |
674 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
675 | int cs_flag = NDSR_CMDD(to_nand_sel(marvell_nand)->ndcb0_csel); | |
676 | ||
677 | return marvell_nfc_end_cmd(chip, cs_flag, "CMDD"); | |
678 | } | |
679 | ||
680 | static int marvell_nfc_wait_op(struct nand_chip *chip, unsigned int timeout_ms) | |
681 | { | |
682 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
683 | int ret; | |
684 | ||
685 | /* Timeout is expressed in ms */ | |
686 | if (!timeout_ms) | |
687 | timeout_ms = IRQ_TIMEOUT; | |
688 | ||
689 | init_completion(&nfc->complete); | |
690 | ||
691 | marvell_nfc_enable_int(nfc, NDCR_RDYM); | |
692 | ret = wait_for_completion_timeout(&nfc->complete, | |
693 | msecs_to_jiffies(timeout_ms)); | |
694 | marvell_nfc_disable_int(nfc, NDCR_RDYM); | |
695 | marvell_nfc_clear_int(nfc, NDSR_RDY(0) | NDSR_RDY(1)); | |
696 | if (!ret) { | |
697 | dev_err(nfc->dev, "Timeout waiting for RB signal\n"); | |
698 | return -ETIMEDOUT; | |
699 | } | |
700 | ||
701 | return 0; | |
702 | } | |
703 | ||
704 | static void marvell_nfc_select_chip(struct mtd_info *mtd, int die_nr) | |
705 | { | |
706 | struct nand_chip *chip = mtd_to_nand(mtd); | |
707 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
708 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
709 | u32 ndcr_generic; | |
710 | ||
711 | if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die) | |
712 | return; | |
713 | ||
714 | if (die_nr < 0 || die_nr >= marvell_nand->nsels) { | |
715 | nfc->selected_chip = NULL; | |
716 | marvell_nand->selected_die = -1; | |
717 | return; | |
718 | } | |
719 | ||
02f26ecf MR |
720 | writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0); |
721 | writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1); | |
722 | ||
723 | /* | |
724 | * Reset the NDCR register to a clean state for this particular chip, | |
725 | * also clear ND_RUN bit. | |
726 | */ | |
727 | ndcr_generic = readl_relaxed(nfc->regs + NDCR) & | |
728 | NDCR_GENERIC_FIELDS_MASK & ~NDCR_ND_RUN; | |
729 | writel_relaxed(ndcr_generic | marvell_nand->ndcr, nfc->regs + NDCR); | |
730 | ||
731 | /* Also reset the interrupt status register */ | |
732 | marvell_nfc_clear_int(nfc, NDCR_ALL_INT); | |
733 | ||
734 | nfc->selected_chip = chip; | |
735 | marvell_nand->selected_die = die_nr; | |
736 | } | |
737 | ||
738 | static irqreturn_t marvell_nfc_isr(int irq, void *dev_id) | |
739 | { | |
740 | struct marvell_nfc *nfc = dev_id; | |
741 | u32 st = readl_relaxed(nfc->regs + NDSR); | |
742 | u32 ien = (~readl_relaxed(nfc->regs + NDCR)) & NDCR_ALL_INT; | |
743 | ||
744 | /* | |
745 | * RDY interrupt mask is one bit in NDCR while there are two status | |
746 | * bit in NDSR (RDY[cs0/cs2] and RDY[cs1/cs3]). | |
747 | */ | |
748 | if (st & NDSR_RDY(1)) | |
749 | st |= NDSR_RDY(0); | |
750 | ||
751 | if (!(st & ien)) | |
752 | return IRQ_NONE; | |
753 | ||
754 | marvell_nfc_disable_int(nfc, st & NDCR_ALL_INT); | |
755 | ||
756 | if (!(st & (NDSR_RDDREQ | NDSR_WRDREQ | NDSR_WRCMDREQ))) | |
757 | complete(&nfc->complete); | |
758 | ||
759 | return IRQ_HANDLED; | |
760 | } | |
761 | ||
762 | /* HW ECC related functions */ | |
763 | static void marvell_nfc_enable_hw_ecc(struct nand_chip *chip) | |
764 | { | |
765 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
766 | u32 ndcr = readl_relaxed(nfc->regs + NDCR); | |
767 | ||
768 | if (!(ndcr & NDCR_ECC_EN)) { | |
769 | writel_relaxed(ndcr | NDCR_ECC_EN, nfc->regs + NDCR); | |
770 | ||
771 | /* | |
772 | * When enabling BCH, set threshold to 0 to always know the | |
773 | * number of corrected bitflips. | |
774 | */ | |
775 | if (chip->ecc.algo == NAND_ECC_BCH) | |
776 | writel_relaxed(NDECCCTRL_BCH_EN, nfc->regs + NDECCCTRL); | |
777 | } | |
778 | } | |
779 | ||
780 | static void marvell_nfc_disable_hw_ecc(struct nand_chip *chip) | |
781 | { | |
782 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
783 | u32 ndcr = readl_relaxed(nfc->regs + NDCR); | |
784 | ||
785 | if (ndcr & NDCR_ECC_EN) { | |
786 | writel_relaxed(ndcr & ~NDCR_ECC_EN, nfc->regs + NDCR); | |
787 | if (chip->ecc.algo == NAND_ECC_BCH) | |
788 | writel_relaxed(0, nfc->regs + NDECCCTRL); | |
789 | } | |
790 | } | |
791 | ||
792 | /* DMA related helpers */ | |
793 | static void marvell_nfc_enable_dma(struct marvell_nfc *nfc) | |
794 | { | |
795 | u32 reg; | |
796 | ||
797 | reg = readl_relaxed(nfc->regs + NDCR); | |
798 | writel_relaxed(reg | NDCR_DMA_EN, nfc->regs + NDCR); | |
799 | } | |
800 | ||
801 | static void marvell_nfc_disable_dma(struct marvell_nfc *nfc) | |
802 | { | |
803 | u32 reg; | |
804 | ||
805 | reg = readl_relaxed(nfc->regs + NDCR); | |
806 | writel_relaxed(reg & ~NDCR_DMA_EN, nfc->regs + NDCR); | |
807 | } | |
808 | ||
809 | /* Read/write PIO/DMA accessors */ | |
810 | static int marvell_nfc_xfer_data_dma(struct marvell_nfc *nfc, | |
811 | enum dma_data_direction direction, | |
812 | unsigned int len) | |
813 | { | |
814 | unsigned int dma_len = min_t(int, ALIGN(len, 32), MAX_CHUNK_SIZE); | |
815 | struct dma_async_tx_descriptor *tx; | |
816 | struct scatterlist sg; | |
817 | dma_cookie_t cookie; | |
818 | int ret; | |
819 | ||
820 | marvell_nfc_enable_dma(nfc); | |
821 | /* Prepare the DMA transfer */ | |
822 | sg_init_one(&sg, nfc->dma_buf, dma_len); | |
823 | dma_map_sg(nfc->dma_chan->device->dev, &sg, 1, direction); | |
824 | tx = dmaengine_prep_slave_sg(nfc->dma_chan, &sg, 1, | |
825 | direction == DMA_FROM_DEVICE ? | |
826 | DMA_DEV_TO_MEM : DMA_MEM_TO_DEV, | |
827 | DMA_PREP_INTERRUPT); | |
828 | if (!tx) { | |
829 | dev_err(nfc->dev, "Could not prepare DMA S/G list\n"); | |
830 | return -ENXIO; | |
831 | } | |
832 | ||
833 | /* Do the task and wait for it to finish */ | |
834 | cookie = dmaengine_submit(tx); | |
835 | ret = dma_submit_error(cookie); | |
836 | if (ret) | |
837 | return -EIO; | |
838 | ||
839 | dma_async_issue_pending(nfc->dma_chan); | |
840 | ret = marvell_nfc_wait_cmdd(nfc->selected_chip); | |
841 | dma_unmap_sg(nfc->dma_chan->device->dev, &sg, 1, direction); | |
842 | marvell_nfc_disable_dma(nfc); | |
843 | if (ret) { | |
844 | dev_err(nfc->dev, "Timeout waiting for DMA (status: %d)\n", | |
845 | dmaengine_tx_status(nfc->dma_chan, cookie, NULL)); | |
846 | dmaengine_terminate_all(nfc->dma_chan); | |
847 | return -ETIMEDOUT; | |
848 | } | |
849 | ||
850 | return 0; | |
851 | } | |
852 | ||
853 | static int marvell_nfc_xfer_data_in_pio(struct marvell_nfc *nfc, u8 *in, | |
854 | unsigned int len) | |
855 | { | |
856 | unsigned int last_len = len % FIFO_DEPTH; | |
857 | unsigned int last_full_offset = round_down(len, FIFO_DEPTH); | |
858 | int i; | |
859 | ||
860 | for (i = 0; i < last_full_offset; i += FIFO_DEPTH) | |
861 | ioread32_rep(nfc->regs + NDDB, in + i, FIFO_REP(FIFO_DEPTH)); | |
862 | ||
863 | if (last_len) { | |
864 | u8 tmp_buf[FIFO_DEPTH]; | |
865 | ||
866 | ioread32_rep(nfc->regs + NDDB, tmp_buf, FIFO_REP(FIFO_DEPTH)); | |
867 | memcpy(in + last_full_offset, tmp_buf, last_len); | |
868 | } | |
869 | ||
870 | return 0; | |
871 | } | |
872 | ||
873 | static int marvell_nfc_xfer_data_out_pio(struct marvell_nfc *nfc, const u8 *out, | |
874 | unsigned int len) | |
875 | { | |
876 | unsigned int last_len = len % FIFO_DEPTH; | |
877 | unsigned int last_full_offset = round_down(len, FIFO_DEPTH); | |
878 | int i; | |
879 | ||
880 | for (i = 0; i < last_full_offset; i += FIFO_DEPTH) | |
881 | iowrite32_rep(nfc->regs + NDDB, out + i, FIFO_REP(FIFO_DEPTH)); | |
882 | ||
883 | if (last_len) { | |
884 | u8 tmp_buf[FIFO_DEPTH]; | |
885 | ||
886 | memcpy(tmp_buf, out + last_full_offset, last_len); | |
887 | iowrite32_rep(nfc->regs + NDDB, tmp_buf, FIFO_REP(FIFO_DEPTH)); | |
888 | } | |
889 | ||
890 | return 0; | |
891 | } | |
892 | ||
893 | static void marvell_nfc_check_empty_chunk(struct nand_chip *chip, | |
894 | u8 *data, int data_len, | |
895 | u8 *spare, int spare_len, | |
896 | u8 *ecc, int ecc_len, | |
897 | unsigned int *max_bitflips) | |
898 | { | |
899 | struct mtd_info *mtd = nand_to_mtd(chip); | |
900 | int bf; | |
901 | ||
902 | /* | |
903 | * Blank pages (all 0xFF) that have not been written may be recognized | |
904 | * as bad if bitflips occur, so whenever an uncorrectable error occurs, | |
905 | * check if the entire page (with ECC bytes) is actually blank or not. | |
906 | */ | |
907 | if (!data) | |
908 | data_len = 0; | |
909 | if (!spare) | |
910 | spare_len = 0; | |
911 | if (!ecc) | |
912 | ecc_len = 0; | |
913 | ||
914 | bf = nand_check_erased_ecc_chunk(data, data_len, ecc, ecc_len, | |
915 | spare, spare_len, chip->ecc.strength); | |
916 | if (bf < 0) { | |
917 | mtd->ecc_stats.failed++; | |
918 | return; | |
919 | } | |
920 | ||
921 | /* Update the stats and max_bitflips */ | |
922 | mtd->ecc_stats.corrected += bf; | |
923 | *max_bitflips = max_t(unsigned int, *max_bitflips, bf); | |
924 | } | |
925 | ||
926 | /* | |
927 | * Check a chunk is correct or not according to hardware ECC engine. | |
928 | * mtd->ecc_stats.corrected is updated, as well as max_bitflips, however | |
929 | * mtd->ecc_stats.failure is not, the function will instead return a non-zero | |
930 | * value indicating that a check on the emptyness of the subpage must be | |
931 | * performed before declaring the subpage corrupted. | |
932 | */ | |
933 | static int marvell_nfc_hw_ecc_correct(struct nand_chip *chip, | |
934 | unsigned int *max_bitflips) | |
935 | { | |
936 | struct mtd_info *mtd = nand_to_mtd(chip); | |
937 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
938 | int bf = 0; | |
939 | u32 ndsr; | |
940 | ||
941 | ndsr = readl_relaxed(nfc->regs + NDSR); | |
942 | ||
943 | /* Check uncorrectable error flag */ | |
944 | if (ndsr & NDSR_UNCERR) { | |
945 | writel_relaxed(ndsr, nfc->regs + NDSR); | |
946 | ||
947 | /* | |
948 | * Do not increment ->ecc_stats.failed now, instead, return a | |
949 | * non-zero value to indicate that this chunk was apparently | |
950 | * bad, and it should be check to see if it empty or not. If | |
951 | * the chunk (with ECC bytes) is not declared empty, the calling | |
952 | * function must increment the failure count. | |
953 | */ | |
954 | return -EBADMSG; | |
955 | } | |
956 | ||
957 | /* Check correctable error flag */ | |
958 | if (ndsr & NDSR_CORERR) { | |
959 | writel_relaxed(ndsr, nfc->regs + NDSR); | |
960 | ||
961 | if (chip->ecc.algo == NAND_ECC_BCH) | |
962 | bf = NDSR_ERRCNT(ndsr); | |
963 | else | |
964 | bf = 1; | |
965 | } | |
966 | ||
967 | /* Update the stats and max_bitflips */ | |
968 | mtd->ecc_stats.corrected += bf; | |
969 | *max_bitflips = max_t(unsigned int, *max_bitflips, bf); | |
970 | ||
971 | return 0; | |
972 | } | |
973 | ||
974 | /* Hamming read helpers */ | |
975 | static int marvell_nfc_hw_ecc_hmg_do_read_page(struct nand_chip *chip, | |
976 | u8 *data_buf, u8 *oob_buf, | |
977 | bool raw, int page) | |
978 | { | |
979 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
980 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
981 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
982 | struct marvell_nfc_op nfc_op = { | |
983 | .ndcb[0] = NDCB0_CMD_TYPE(TYPE_READ) | | |
984 | NDCB0_ADDR_CYC(marvell_nand->addr_cyc) | | |
985 | NDCB0_DBC | | |
986 | NDCB0_CMD1(NAND_CMD_READ0) | | |
987 | NDCB0_CMD2(NAND_CMD_READSTART), | |
988 | .ndcb[1] = NDCB1_ADDRS_PAGE(page), | |
989 | .ndcb[2] = NDCB2_ADDR5_PAGE(page), | |
990 | }; | |
991 | unsigned int oob_bytes = lt->spare_bytes + (raw ? lt->ecc_bytes : 0); | |
992 | int ret; | |
993 | ||
994 | /* NFCv2 needs more information about the operation being executed */ | |
995 | if (nfc->caps->is_nfcv2) | |
996 | nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW); | |
997 | ||
998 | ret = marvell_nfc_prepare_cmd(chip); | |
999 | if (ret) | |
1000 | return ret; | |
1001 | ||
1002 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1003 | ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ, | |
1004 | "RDDREQ while draining FIFO (data/oob)"); | |
1005 | if (ret) | |
1006 | return ret; | |
1007 | ||
1008 | /* | |
1009 | * Read the page then the OOB area. Unlike what is shown in current | |
1010 | * documentation, spare bytes are protected by the ECC engine, and must | |
1011 | * be at the beginning of the OOB area or running this driver on legacy | |
1012 | * systems will prevent the discovery of the BBM/BBT. | |
1013 | */ | |
1014 | if (nfc->use_dma) { | |
1015 | marvell_nfc_xfer_data_dma(nfc, DMA_FROM_DEVICE, | |
1016 | lt->data_bytes + oob_bytes); | |
1017 | memcpy(data_buf, nfc->dma_buf, lt->data_bytes); | |
1018 | memcpy(oob_buf, nfc->dma_buf + lt->data_bytes, oob_bytes); | |
1019 | } else { | |
1020 | marvell_nfc_xfer_data_in_pio(nfc, data_buf, lt->data_bytes); | |
1021 | marvell_nfc_xfer_data_in_pio(nfc, oob_buf, oob_bytes); | |
1022 | } | |
1023 | ||
1024 | ret = marvell_nfc_wait_cmdd(chip); | |
1025 | ||
1026 | return ret; | |
1027 | } | |
1028 | ||
1029 | static int marvell_nfc_hw_ecc_hmg_read_page_raw(struct mtd_info *mtd, | |
1030 | struct nand_chip *chip, u8 *buf, | |
1031 | int oob_required, int page) | |
1032 | { | |
1033 | return marvell_nfc_hw_ecc_hmg_do_read_page(chip, buf, chip->oob_poi, | |
1034 | true, page); | |
1035 | } | |
1036 | ||
1037 | static int marvell_nfc_hw_ecc_hmg_read_page(struct mtd_info *mtd, | |
1038 | struct nand_chip *chip, | |
1039 | u8 *buf, int oob_required, | |
1040 | int page) | |
1041 | { | |
1042 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
1043 | unsigned int full_sz = lt->data_bytes + lt->spare_bytes + lt->ecc_bytes; | |
1044 | int max_bitflips = 0, ret; | |
1045 | u8 *raw_buf; | |
1046 | ||
1047 | marvell_nfc_enable_hw_ecc(chip); | |
1048 | marvell_nfc_hw_ecc_hmg_do_read_page(chip, buf, chip->oob_poi, false, | |
1049 | page); | |
1050 | ret = marvell_nfc_hw_ecc_correct(chip, &max_bitflips); | |
1051 | marvell_nfc_disable_hw_ecc(chip); | |
1052 | ||
1053 | if (!ret) | |
1054 | return max_bitflips; | |
1055 | ||
1056 | /* | |
1057 | * When ECC failures are detected, check if the full page has been | |
1058 | * written or not. Ignore the failure if it is actually empty. | |
1059 | */ | |
1060 | raw_buf = kmalloc(full_sz, GFP_KERNEL); | |
1061 | if (!raw_buf) | |
1062 | return -ENOMEM; | |
1063 | ||
1064 | marvell_nfc_hw_ecc_hmg_do_read_page(chip, raw_buf, raw_buf + | |
1065 | lt->data_bytes, true, page); | |
1066 | marvell_nfc_check_empty_chunk(chip, raw_buf, full_sz, NULL, 0, NULL, 0, | |
1067 | &max_bitflips); | |
1068 | kfree(raw_buf); | |
1069 | ||
1070 | return max_bitflips; | |
1071 | } | |
1072 | ||
1073 | /* | |
1074 | * Spare area in Hamming layouts is not protected by the ECC engine (even if | |
1075 | * it appears before the ECC bytes when reading), the ->read_oob_raw() function | |
1076 | * also stands for ->read_oob(). | |
1077 | */ | |
1078 | static int marvell_nfc_hw_ecc_hmg_read_oob_raw(struct mtd_info *mtd, | |
1079 | struct nand_chip *chip, int page) | |
1080 | { | |
1081 | /* Invalidate page cache */ | |
1082 | chip->pagebuf = -1; | |
1083 | ||
1084 | return marvell_nfc_hw_ecc_hmg_do_read_page(chip, chip->data_buf, | |
1085 | chip->oob_poi, true, page); | |
1086 | } | |
1087 | ||
1088 | /* Hamming write helpers */ | |
1089 | static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip, | |
1090 | const u8 *data_buf, | |
1091 | const u8 *oob_buf, bool raw, | |
1092 | int page) | |
1093 | { | |
1094 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
1095 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
1096 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
1097 | struct marvell_nfc_op nfc_op = { | |
1098 | .ndcb[0] = NDCB0_CMD_TYPE(TYPE_WRITE) | | |
1099 | NDCB0_ADDR_CYC(marvell_nand->addr_cyc) | | |
1100 | NDCB0_CMD1(NAND_CMD_SEQIN) | | |
1101 | NDCB0_CMD2(NAND_CMD_PAGEPROG) | | |
1102 | NDCB0_DBC, | |
1103 | .ndcb[1] = NDCB1_ADDRS_PAGE(page), | |
1104 | .ndcb[2] = NDCB2_ADDR5_PAGE(page), | |
1105 | }; | |
1106 | unsigned int oob_bytes = lt->spare_bytes + (raw ? lt->ecc_bytes : 0); | |
1107 | int ret; | |
1108 | ||
1109 | /* NFCv2 needs more information about the operation being executed */ | |
1110 | if (nfc->caps->is_nfcv2) | |
1111 | nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW); | |
1112 | ||
1113 | ret = marvell_nfc_prepare_cmd(chip); | |
1114 | if (ret) | |
1115 | return ret; | |
1116 | ||
1117 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1118 | ret = marvell_nfc_end_cmd(chip, NDSR_WRDREQ, | |
1119 | "WRDREQ while loading FIFO (data)"); | |
1120 | if (ret) | |
1121 | return ret; | |
1122 | ||
1123 | /* Write the page then the OOB area */ | |
1124 | if (nfc->use_dma) { | |
1125 | memcpy(nfc->dma_buf, data_buf, lt->data_bytes); | |
1126 | memcpy(nfc->dma_buf + lt->data_bytes, oob_buf, oob_bytes); | |
1127 | marvell_nfc_xfer_data_dma(nfc, DMA_TO_DEVICE, lt->data_bytes + | |
1128 | lt->ecc_bytes + lt->spare_bytes); | |
1129 | } else { | |
1130 | marvell_nfc_xfer_data_out_pio(nfc, data_buf, lt->data_bytes); | |
1131 | marvell_nfc_xfer_data_out_pio(nfc, oob_buf, oob_bytes); | |
1132 | } | |
1133 | ||
1134 | ret = marvell_nfc_wait_cmdd(chip); | |
1135 | if (ret) | |
1136 | return ret; | |
1137 | ||
1138 | ret = marvell_nfc_wait_op(chip, | |
b76401fc | 1139 | PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max)); |
02f26ecf MR |
1140 | return ret; |
1141 | } | |
1142 | ||
1143 | static int marvell_nfc_hw_ecc_hmg_write_page_raw(struct mtd_info *mtd, | |
1144 | struct nand_chip *chip, | |
1145 | const u8 *buf, | |
1146 | int oob_required, int page) | |
1147 | { | |
1148 | return marvell_nfc_hw_ecc_hmg_do_write_page(chip, buf, chip->oob_poi, | |
1149 | true, page); | |
1150 | } | |
1151 | ||
1152 | static int marvell_nfc_hw_ecc_hmg_write_page(struct mtd_info *mtd, | |
1153 | struct nand_chip *chip, | |
1154 | const u8 *buf, | |
1155 | int oob_required, int page) | |
1156 | { | |
1157 | int ret; | |
1158 | ||
1159 | marvell_nfc_enable_hw_ecc(chip); | |
1160 | ret = marvell_nfc_hw_ecc_hmg_do_write_page(chip, buf, chip->oob_poi, | |
1161 | false, page); | |
1162 | marvell_nfc_disable_hw_ecc(chip); | |
1163 | ||
1164 | return ret; | |
1165 | } | |
1166 | ||
1167 | /* | |
1168 | * Spare area in Hamming layouts is not protected by the ECC engine (even if | |
1169 | * it appears before the ECC bytes when reading), the ->write_oob_raw() function | |
1170 | * also stands for ->write_oob(). | |
1171 | */ | |
1172 | static int marvell_nfc_hw_ecc_hmg_write_oob_raw(struct mtd_info *mtd, | |
1173 | struct nand_chip *chip, | |
1174 | int page) | |
1175 | { | |
1176 | /* Invalidate page cache */ | |
1177 | chip->pagebuf = -1; | |
1178 | ||
1179 | memset(chip->data_buf, 0xFF, mtd->writesize); | |
1180 | ||
1181 | return marvell_nfc_hw_ecc_hmg_do_write_page(chip, chip->data_buf, | |
1182 | chip->oob_poi, true, page); | |
1183 | } | |
1184 | ||
1185 | /* BCH read helpers */ | |
1186 | static int marvell_nfc_hw_ecc_bch_read_page_raw(struct mtd_info *mtd, | |
1187 | struct nand_chip *chip, u8 *buf, | |
1188 | int oob_required, int page) | |
1189 | { | |
1190 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
1191 | u8 *oob = chip->oob_poi; | |
1192 | int chunk_size = lt->data_bytes + lt->spare_bytes + lt->ecc_bytes; | |
1193 | int ecc_offset = (lt->full_chunk_cnt * lt->spare_bytes) + | |
1194 | lt->last_spare_bytes; | |
1195 | int data_len = lt->data_bytes; | |
1196 | int spare_len = lt->spare_bytes; | |
1197 | int ecc_len = lt->ecc_bytes; | |
1198 | int chunk; | |
1199 | ||
1200 | if (oob_required) | |
1201 | memset(chip->oob_poi, 0xFF, mtd->oobsize); | |
1202 | ||
1203 | nand_read_page_op(chip, page, 0, NULL, 0); | |
1204 | ||
1205 | for (chunk = 0; chunk < lt->nchunks; chunk++) { | |
1206 | /* Update last chunk length */ | |
1207 | if (chunk >= lt->full_chunk_cnt) { | |
1208 | data_len = lt->last_data_bytes; | |
1209 | spare_len = lt->last_spare_bytes; | |
1210 | ecc_len = lt->last_ecc_bytes; | |
1211 | } | |
1212 | ||
1213 | /* Read data bytes*/ | |
1214 | nand_change_read_column_op(chip, chunk * chunk_size, | |
1215 | buf + (lt->data_bytes * chunk), | |
1216 | data_len, false); | |
1217 | ||
1218 | /* Read spare bytes */ | |
1219 | nand_read_data_op(chip, oob + (lt->spare_bytes * chunk), | |
1220 | spare_len, false); | |
1221 | ||
1222 | /* Read ECC bytes */ | |
1223 | nand_read_data_op(chip, oob + ecc_offset + | |
1224 | (ALIGN(lt->ecc_bytes, 32) * chunk), | |
1225 | ecc_len, false); | |
1226 | } | |
1227 | ||
1228 | return 0; | |
1229 | } | |
1230 | ||
1231 | static void marvell_nfc_hw_ecc_bch_read_chunk(struct nand_chip *chip, int chunk, | |
1232 | u8 *data, unsigned int data_len, | |
1233 | u8 *spare, unsigned int spare_len, | |
1234 | int page) | |
1235 | { | |
1236 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
1237 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
1238 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
1239 | int i, ret; | |
1240 | struct marvell_nfc_op nfc_op = { | |
1241 | .ndcb[0] = NDCB0_CMD_TYPE(TYPE_READ) | | |
1242 | NDCB0_ADDR_CYC(marvell_nand->addr_cyc) | | |
1243 | NDCB0_LEN_OVRD, | |
1244 | .ndcb[1] = NDCB1_ADDRS_PAGE(page), | |
1245 | .ndcb[2] = NDCB2_ADDR5_PAGE(page), | |
1246 | .ndcb[3] = data_len + spare_len, | |
1247 | }; | |
1248 | ||
1249 | ret = marvell_nfc_prepare_cmd(chip); | |
1250 | if (ret) | |
1251 | return; | |
1252 | ||
1253 | if (chunk == 0) | |
1254 | nfc_op.ndcb[0] |= NDCB0_DBC | | |
1255 | NDCB0_CMD1(NAND_CMD_READ0) | | |
1256 | NDCB0_CMD2(NAND_CMD_READSTART); | |
1257 | ||
1258 | /* | |
90d61763 BB |
1259 | * Trigger the monolithic read on the first chunk, then naked read on |
1260 | * intermediate chunks and finally a last naked read on the last chunk. | |
02f26ecf | 1261 | */ |
90d61763 | 1262 | if (chunk == 0) |
02f26ecf | 1263 | nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW); |
90d61763 BB |
1264 | else if (chunk < lt->nchunks - 1) |
1265 | nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_NAKED_RW); | |
02f26ecf MR |
1266 | else |
1267 | nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW); | |
1268 | ||
1269 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1270 | ||
1271 | /* | |
1272 | * According to the datasheet, when reading from NDDB | |
1273 | * with BCH enabled, after each 32 bytes reads, we | |
1274 | * have to make sure that the NDSR.RDDREQ bit is set. | |
1275 | * | |
1276 | * Drain the FIFO, 8 32-bit reads at a time, and skip | |
1277 | * the polling on the last read. | |
1278 | * | |
1279 | * Length is a multiple of 32 bytes, hence it is a multiple of 8 too. | |
1280 | */ | |
1281 | for (i = 0; i < data_len; i += FIFO_DEPTH * BCH_SEQ_READS) { | |
1282 | marvell_nfc_end_cmd(chip, NDSR_RDDREQ, | |
1283 | "RDDREQ while draining FIFO (data)"); | |
1284 | marvell_nfc_xfer_data_in_pio(nfc, data, | |
1285 | FIFO_DEPTH * BCH_SEQ_READS); | |
1286 | data += FIFO_DEPTH * BCH_SEQ_READS; | |
1287 | } | |
1288 | ||
1289 | for (i = 0; i < spare_len; i += FIFO_DEPTH * BCH_SEQ_READS) { | |
1290 | marvell_nfc_end_cmd(chip, NDSR_RDDREQ, | |
1291 | "RDDREQ while draining FIFO (OOB)"); | |
1292 | marvell_nfc_xfer_data_in_pio(nfc, spare, | |
1293 | FIFO_DEPTH * BCH_SEQ_READS); | |
1294 | spare += FIFO_DEPTH * BCH_SEQ_READS; | |
1295 | } | |
1296 | } | |
1297 | ||
1298 | static int marvell_nfc_hw_ecc_bch_read_page(struct mtd_info *mtd, | |
1299 | struct nand_chip *chip, | |
1300 | u8 *buf, int oob_required, | |
1301 | int page) | |
1302 | { | |
1303 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
1304 | int data_len = lt->data_bytes, spare_len = lt->spare_bytes, ecc_len; | |
1305 | u8 *data = buf, *spare = chip->oob_poi, *ecc; | |
1306 | int max_bitflips = 0; | |
1307 | u32 failure_mask = 0; | |
1308 | int chunk, ecc_offset_in_page, ret; | |
1309 | ||
1310 | /* | |
1311 | * With BCH, OOB is not fully used (and thus not read entirely), not | |
1312 | * expected bytes could show up at the end of the OOB buffer if not | |
1313 | * explicitly erased. | |
1314 | */ | |
1315 | if (oob_required) | |
1316 | memset(chip->oob_poi, 0xFF, mtd->oobsize); | |
1317 | ||
1318 | marvell_nfc_enable_hw_ecc(chip); | |
1319 | ||
1320 | for (chunk = 0; chunk < lt->nchunks; chunk++) { | |
1321 | /* Update length for the last chunk */ | |
1322 | if (chunk >= lt->full_chunk_cnt) { | |
1323 | data_len = lt->last_data_bytes; | |
1324 | spare_len = lt->last_spare_bytes; | |
1325 | } | |
1326 | ||
1327 | /* Read the chunk and detect number of bitflips */ | |
1328 | marvell_nfc_hw_ecc_bch_read_chunk(chip, chunk, data, data_len, | |
1329 | spare, spare_len, page); | |
1330 | ret = marvell_nfc_hw_ecc_correct(chip, &max_bitflips); | |
1331 | if (ret) | |
1332 | failure_mask |= BIT(chunk); | |
1333 | ||
1334 | data += data_len; | |
1335 | spare += spare_len; | |
1336 | } | |
1337 | ||
1338 | marvell_nfc_disable_hw_ecc(chip); | |
1339 | ||
1340 | if (!failure_mask) | |
1341 | return max_bitflips; | |
1342 | ||
1343 | /* | |
1344 | * Please note that dumping the ECC bytes during a normal read with OOB | |
1345 | * area would add a significant overhead as ECC bytes are "consumed" by | |
1346 | * the controller in normal mode and must be re-read in raw mode. To | |
1347 | * avoid dropping the performances, we prefer not to include them. The | |
1348 | * user should re-read the page in raw mode if ECC bytes are required. | |
1349 | * | |
1350 | * However, for any subpage read error reported by ->correct(), the ECC | |
1351 | * bytes must be read in raw mode and the full subpage must be checked | |
1352 | * to see if it is entirely empty of if there was an actual error. | |
1353 | */ | |
1354 | for (chunk = 0; chunk < lt->nchunks; chunk++) { | |
1355 | /* No failure reported for this chunk, move to the next one */ | |
1356 | if (!(failure_mask & BIT(chunk))) | |
1357 | continue; | |
1358 | ||
1359 | /* Derive ECC bytes positions (in page/buffer) and length */ | |
1360 | ecc = chip->oob_poi + | |
1361 | (lt->full_chunk_cnt * lt->spare_bytes) + | |
1362 | lt->last_spare_bytes + | |
1363 | (chunk * ALIGN(lt->ecc_bytes, 32)); | |
1364 | ecc_offset_in_page = | |
1365 | (chunk * (lt->data_bytes + lt->spare_bytes + | |
1366 | lt->ecc_bytes)) + | |
1367 | (chunk < lt->full_chunk_cnt ? | |
1368 | lt->data_bytes + lt->spare_bytes : | |
1369 | lt->last_data_bytes + lt->last_spare_bytes); | |
1370 | ecc_len = chunk < lt->full_chunk_cnt ? | |
1371 | lt->ecc_bytes : lt->last_ecc_bytes; | |
1372 | ||
1373 | /* Do the actual raw read of the ECC bytes */ | |
1374 | nand_change_read_column_op(chip, ecc_offset_in_page, | |
1375 | ecc, ecc_len, false); | |
1376 | ||
1377 | /* Derive data/spare bytes positions (in buffer) and length */ | |
1378 | data = buf + (chunk * lt->data_bytes); | |
1379 | data_len = chunk < lt->full_chunk_cnt ? | |
1380 | lt->data_bytes : lt->last_data_bytes; | |
1381 | spare = chip->oob_poi + (chunk * (lt->spare_bytes + | |
1382 | lt->ecc_bytes)); | |
1383 | spare_len = chunk < lt->full_chunk_cnt ? | |
1384 | lt->spare_bytes : lt->last_spare_bytes; | |
1385 | ||
1386 | /* Check the entire chunk (data + spare + ecc) for emptyness */ | |
1387 | marvell_nfc_check_empty_chunk(chip, data, data_len, spare, | |
1388 | spare_len, ecc, ecc_len, | |
1389 | &max_bitflips); | |
1390 | } | |
1391 | ||
1392 | return max_bitflips; | |
1393 | } | |
1394 | ||
1395 | static int marvell_nfc_hw_ecc_bch_read_oob_raw(struct mtd_info *mtd, | |
1396 | struct nand_chip *chip, int page) | |
1397 | { | |
1398 | /* Invalidate page cache */ | |
1399 | chip->pagebuf = -1; | |
1400 | ||
1401 | return chip->ecc.read_page_raw(mtd, chip, chip->data_buf, true, page); | |
1402 | } | |
1403 | ||
1404 | static int marvell_nfc_hw_ecc_bch_read_oob(struct mtd_info *mtd, | |
1405 | struct nand_chip *chip, int page) | |
1406 | { | |
1407 | /* Invalidate page cache */ | |
1408 | chip->pagebuf = -1; | |
1409 | ||
1410 | return chip->ecc.read_page(mtd, chip, chip->data_buf, true, page); | |
1411 | } | |
1412 | ||
1413 | /* BCH write helpers */ | |
1414 | static int marvell_nfc_hw_ecc_bch_write_page_raw(struct mtd_info *mtd, | |
1415 | struct nand_chip *chip, | |
1416 | const u8 *buf, | |
1417 | int oob_required, int page) | |
1418 | { | |
1419 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
1420 | int full_chunk_size = lt->data_bytes + lt->spare_bytes + lt->ecc_bytes; | |
1421 | int data_len = lt->data_bytes; | |
1422 | int spare_len = lt->spare_bytes; | |
1423 | int ecc_len = lt->ecc_bytes; | |
02f26ecf MR |
1424 | int spare_offset = 0; |
1425 | int ecc_offset = (lt->full_chunk_cnt * lt->spare_bytes) + | |
1426 | lt->last_spare_bytes; | |
1427 | int chunk; | |
1428 | ||
1429 | nand_prog_page_begin_op(chip, page, 0, NULL, 0); | |
1430 | ||
1431 | for (chunk = 0; chunk < lt->nchunks; chunk++) { | |
1432 | if (chunk >= lt->full_chunk_cnt) { | |
1433 | data_len = lt->last_data_bytes; | |
1434 | spare_len = lt->last_spare_bytes; | |
1435 | ecc_len = lt->last_ecc_bytes; | |
02f26ecf MR |
1436 | } |
1437 | ||
1438 | /* Point to the column of the next chunk */ | |
1439 | nand_change_write_column_op(chip, chunk * full_chunk_size, | |
1440 | NULL, 0, false); | |
1441 | ||
1442 | /* Write the data */ | |
1443 | nand_write_data_op(chip, buf + (chunk * lt->data_bytes), | |
1444 | data_len, false); | |
1445 | ||
1446 | if (!oob_required) | |
1447 | continue; | |
1448 | ||
1449 | /* Write the spare bytes */ | |
1450 | if (spare_len) | |
1451 | nand_write_data_op(chip, chip->oob_poi + spare_offset, | |
1452 | spare_len, false); | |
1453 | ||
1454 | /* Write the ECC bytes */ | |
1455 | if (ecc_len) | |
1456 | nand_write_data_op(chip, chip->oob_poi + ecc_offset, | |
1457 | ecc_len, false); | |
1458 | ||
1459 | spare_offset += spare_len; | |
1460 | ecc_offset += ALIGN(ecc_len, 32); | |
1461 | } | |
1462 | ||
1463 | return nand_prog_page_end_op(chip); | |
1464 | } | |
1465 | ||
1466 | static int | |
1467 | marvell_nfc_hw_ecc_bch_write_chunk(struct nand_chip *chip, int chunk, | |
1468 | const u8 *data, unsigned int data_len, | |
1469 | const u8 *spare, unsigned int spare_len, | |
1470 | int page) | |
1471 | { | |
1472 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
1473 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
1474 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
a2ee41fd | 1475 | u32 xtype; |
02f26ecf MR |
1476 | int ret; |
1477 | struct marvell_nfc_op nfc_op = { | |
1478 | .ndcb[0] = NDCB0_CMD_TYPE(TYPE_WRITE) | NDCB0_LEN_OVRD, | |
1479 | .ndcb[3] = data_len + spare_len, | |
1480 | }; | |
1481 | ||
1482 | /* | |
1483 | * First operation dispatches the CMD_SEQIN command, issue the address | |
1484 | * cycles and asks for the first chunk of data. | |
1485 | * All operations in the middle (if any) will issue a naked write and | |
1486 | * also ask for data. | |
1487 | * Last operation (if any) asks for the last chunk of data through a | |
1488 | * last naked write. | |
1489 | */ | |
1490 | if (chunk == 0) { | |
a2ee41fd MR |
1491 | if (lt->nchunks == 1) |
1492 | xtype = XTYPE_MONOLITHIC_RW; | |
1493 | else | |
1494 | xtype = XTYPE_WRITE_DISPATCH; | |
1495 | ||
1496 | nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(xtype) | | |
02f26ecf MR |
1497 | NDCB0_ADDR_CYC(marvell_nand->addr_cyc) | |
1498 | NDCB0_CMD1(NAND_CMD_SEQIN); | |
1499 | nfc_op.ndcb[1] |= NDCB1_ADDRS_PAGE(page); | |
1500 | nfc_op.ndcb[2] |= NDCB2_ADDR5_PAGE(page); | |
1501 | } else if (chunk < lt->nchunks - 1) { | |
1502 | nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_NAKED_RW); | |
1503 | } else { | |
1504 | nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW); | |
1505 | } | |
1506 | ||
1507 | /* Always dispatch the PAGEPROG command on the last chunk */ | |
1508 | if (chunk == lt->nchunks - 1) | |
1509 | nfc_op.ndcb[0] |= NDCB0_CMD2(NAND_CMD_PAGEPROG) | NDCB0_DBC; | |
1510 | ||
1511 | ret = marvell_nfc_prepare_cmd(chip); | |
1512 | if (ret) | |
1513 | return ret; | |
1514 | ||
1515 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1516 | ret = marvell_nfc_end_cmd(chip, NDSR_WRDREQ, | |
1517 | "WRDREQ while loading FIFO (data)"); | |
1518 | if (ret) | |
1519 | return ret; | |
1520 | ||
1521 | /* Transfer the contents */ | |
1522 | iowrite32_rep(nfc->regs + NDDB, data, FIFO_REP(data_len)); | |
1523 | iowrite32_rep(nfc->regs + NDDB, spare, FIFO_REP(spare_len)); | |
1524 | ||
1525 | return 0; | |
1526 | } | |
1527 | ||
1528 | static int marvell_nfc_hw_ecc_bch_write_page(struct mtd_info *mtd, | |
1529 | struct nand_chip *chip, | |
1530 | const u8 *buf, | |
1531 | int oob_required, int page) | |
1532 | { | |
1533 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
1534 | const u8 *data = buf; | |
1535 | const u8 *spare = chip->oob_poi; | |
1536 | int data_len = lt->data_bytes; | |
1537 | int spare_len = lt->spare_bytes; | |
1538 | int chunk, ret; | |
1539 | ||
1540 | /* Spare data will be written anyway, so clear it to avoid garbage */ | |
1541 | if (!oob_required) | |
1542 | memset(chip->oob_poi, 0xFF, mtd->oobsize); | |
1543 | ||
1544 | marvell_nfc_enable_hw_ecc(chip); | |
1545 | ||
1546 | for (chunk = 0; chunk < lt->nchunks; chunk++) { | |
1547 | if (chunk >= lt->full_chunk_cnt) { | |
1548 | data_len = lt->last_data_bytes; | |
1549 | spare_len = lt->last_spare_bytes; | |
1550 | } | |
1551 | ||
1552 | marvell_nfc_hw_ecc_bch_write_chunk(chip, chunk, data, data_len, | |
1553 | spare, spare_len, page); | |
1554 | data += data_len; | |
1555 | spare += spare_len; | |
1556 | ||
1557 | /* | |
1558 | * Waiting only for CMDD or PAGED is not enough, ECC are | |
1559 | * partially written. No flag is set once the operation is | |
1560 | * really finished but the ND_RUN bit is cleared, so wait for it | |
1561 | * before stepping into the next command. | |
1562 | */ | |
1563 | marvell_nfc_wait_ndrun(chip); | |
1564 | } | |
1565 | ||
1566 | ret = marvell_nfc_wait_op(chip, | |
b76401fc | 1567 | PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max)); |
02f26ecf MR |
1568 | |
1569 | marvell_nfc_disable_hw_ecc(chip); | |
1570 | ||
1571 | if (ret) | |
1572 | return ret; | |
1573 | ||
1574 | return 0; | |
1575 | } | |
1576 | ||
1577 | static int marvell_nfc_hw_ecc_bch_write_oob_raw(struct mtd_info *mtd, | |
1578 | struct nand_chip *chip, | |
1579 | int page) | |
1580 | { | |
1581 | /* Invalidate page cache */ | |
1582 | chip->pagebuf = -1; | |
1583 | ||
1584 | memset(chip->data_buf, 0xFF, mtd->writesize); | |
1585 | ||
1586 | return chip->ecc.write_page_raw(mtd, chip, chip->data_buf, true, page); | |
1587 | } | |
1588 | ||
1589 | static int marvell_nfc_hw_ecc_bch_write_oob(struct mtd_info *mtd, | |
1590 | struct nand_chip *chip, int page) | |
1591 | { | |
1592 | /* Invalidate page cache */ | |
1593 | chip->pagebuf = -1; | |
1594 | ||
1595 | memset(chip->data_buf, 0xFF, mtd->writesize); | |
1596 | ||
1597 | return chip->ecc.write_page(mtd, chip, chip->data_buf, true, page); | |
1598 | } | |
1599 | ||
1600 | /* NAND framework ->exec_op() hooks and related helpers */ | |
1601 | static void marvell_nfc_parse_instructions(struct nand_chip *chip, | |
1602 | const struct nand_subop *subop, | |
1603 | struct marvell_nfc_op *nfc_op) | |
1604 | { | |
1605 | const struct nand_op_instr *instr = NULL; | |
1606 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
1607 | bool first_cmd = true; | |
1608 | unsigned int op_id; | |
1609 | int i; | |
1610 | ||
1611 | /* Reset the input structure as most of its fields will be OR'ed */ | |
1612 | memset(nfc_op, 0, sizeof(struct marvell_nfc_op)); | |
1613 | ||
1614 | for (op_id = 0; op_id < subop->ninstrs; op_id++) { | |
1615 | unsigned int offset, naddrs; | |
1616 | const u8 *addrs; | |
1617 | int len = nand_subop_get_data_len(subop, op_id); | |
1618 | ||
1619 | instr = &subop->instrs[op_id]; | |
1620 | ||
1621 | switch (instr->type) { | |
1622 | case NAND_OP_CMD_INSTR: | |
1623 | if (first_cmd) | |
1624 | nfc_op->ndcb[0] |= | |
1625 | NDCB0_CMD1(instr->ctx.cmd.opcode); | |
1626 | else | |
1627 | nfc_op->ndcb[0] |= | |
1628 | NDCB0_CMD2(instr->ctx.cmd.opcode) | | |
1629 | NDCB0_DBC; | |
1630 | ||
1631 | nfc_op->cle_ale_delay_ns = instr->delay_ns; | |
1632 | first_cmd = false; | |
1633 | break; | |
1634 | ||
1635 | case NAND_OP_ADDR_INSTR: | |
1636 | offset = nand_subop_get_addr_start_off(subop, op_id); | |
1637 | naddrs = nand_subop_get_num_addr_cyc(subop, op_id); | |
1638 | addrs = &instr->ctx.addr.addrs[offset]; | |
1639 | ||
1640 | nfc_op->ndcb[0] |= NDCB0_ADDR_CYC(naddrs); | |
1641 | ||
1642 | for (i = 0; i < min_t(unsigned int, 4, naddrs); i++) | |
1643 | nfc_op->ndcb[1] |= addrs[i] << (8 * i); | |
1644 | ||
1645 | if (naddrs >= 5) | |
1646 | nfc_op->ndcb[2] |= NDCB2_ADDR5_CYC(addrs[4]); | |
1647 | if (naddrs >= 6) | |
1648 | nfc_op->ndcb[3] |= NDCB3_ADDR6_CYC(addrs[5]); | |
1649 | if (naddrs == 7) | |
1650 | nfc_op->ndcb[3] |= NDCB3_ADDR7_CYC(addrs[6]); | |
1651 | ||
1652 | nfc_op->cle_ale_delay_ns = instr->delay_ns; | |
1653 | break; | |
1654 | ||
1655 | case NAND_OP_DATA_IN_INSTR: | |
1656 | nfc_op->data_instr = instr; | |
1657 | nfc_op->data_instr_idx = op_id; | |
1658 | nfc_op->ndcb[0] |= NDCB0_CMD_TYPE(TYPE_READ); | |
1659 | if (nfc->caps->is_nfcv2) { | |
1660 | nfc_op->ndcb[0] |= | |
1661 | NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW) | | |
1662 | NDCB0_LEN_OVRD; | |
1663 | nfc_op->ndcb[3] |= round_up(len, FIFO_DEPTH); | |
1664 | } | |
1665 | nfc_op->data_delay_ns = instr->delay_ns; | |
1666 | break; | |
1667 | ||
1668 | case NAND_OP_DATA_OUT_INSTR: | |
1669 | nfc_op->data_instr = instr; | |
1670 | nfc_op->data_instr_idx = op_id; | |
1671 | nfc_op->ndcb[0] |= NDCB0_CMD_TYPE(TYPE_WRITE); | |
1672 | if (nfc->caps->is_nfcv2) { | |
1673 | nfc_op->ndcb[0] |= | |
1674 | NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW) | | |
1675 | NDCB0_LEN_OVRD; | |
1676 | nfc_op->ndcb[3] |= round_up(len, FIFO_DEPTH); | |
1677 | } | |
1678 | nfc_op->data_delay_ns = instr->delay_ns; | |
1679 | break; | |
1680 | ||
1681 | case NAND_OP_WAITRDY_INSTR: | |
1682 | nfc_op->rdy_timeout_ms = instr->ctx.waitrdy.timeout_ms; | |
1683 | nfc_op->rdy_delay_ns = instr->delay_ns; | |
1684 | break; | |
1685 | } | |
1686 | } | |
1687 | } | |
1688 | ||
1689 | static int marvell_nfc_xfer_data_pio(struct nand_chip *chip, | |
1690 | const struct nand_subop *subop, | |
1691 | struct marvell_nfc_op *nfc_op) | |
1692 | { | |
1693 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
1694 | const struct nand_op_instr *instr = nfc_op->data_instr; | |
1695 | unsigned int op_id = nfc_op->data_instr_idx; | |
1696 | unsigned int len = nand_subop_get_data_len(subop, op_id); | |
1697 | unsigned int offset = nand_subop_get_data_start_off(subop, op_id); | |
1698 | bool reading = (instr->type == NAND_OP_DATA_IN_INSTR); | |
1699 | int ret; | |
1700 | ||
1701 | if (instr->ctx.data.force_8bit) | |
1702 | marvell_nfc_force_byte_access(chip, true); | |
1703 | ||
1704 | if (reading) { | |
1705 | u8 *in = instr->ctx.data.buf.in + offset; | |
1706 | ||
1707 | ret = marvell_nfc_xfer_data_in_pio(nfc, in, len); | |
1708 | } else { | |
1709 | const u8 *out = instr->ctx.data.buf.out + offset; | |
1710 | ||
1711 | ret = marvell_nfc_xfer_data_out_pio(nfc, out, len); | |
1712 | } | |
1713 | ||
1714 | if (instr->ctx.data.force_8bit) | |
1715 | marvell_nfc_force_byte_access(chip, false); | |
1716 | ||
1717 | return ret; | |
1718 | } | |
1719 | ||
1720 | static int marvell_nfc_monolithic_access_exec(struct nand_chip *chip, | |
1721 | const struct nand_subop *subop) | |
1722 | { | |
1723 | struct marvell_nfc_op nfc_op; | |
1724 | bool reading; | |
1725 | int ret; | |
1726 | ||
1727 | marvell_nfc_parse_instructions(chip, subop, &nfc_op); | |
1728 | reading = (nfc_op.data_instr->type == NAND_OP_DATA_IN_INSTR); | |
1729 | ||
1730 | ret = marvell_nfc_prepare_cmd(chip); | |
1731 | if (ret) | |
1732 | return ret; | |
1733 | ||
1734 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1735 | ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ | NDSR_WRDREQ, | |
1736 | "RDDREQ/WRDREQ while draining raw data"); | |
1737 | if (ret) | |
1738 | return ret; | |
1739 | ||
1740 | cond_delay(nfc_op.cle_ale_delay_ns); | |
1741 | ||
1742 | if (reading) { | |
1743 | if (nfc_op.rdy_timeout_ms) { | |
1744 | ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms); | |
1745 | if (ret) | |
1746 | return ret; | |
1747 | } | |
1748 | ||
1749 | cond_delay(nfc_op.rdy_delay_ns); | |
1750 | } | |
1751 | ||
1752 | marvell_nfc_xfer_data_pio(chip, subop, &nfc_op); | |
1753 | ret = marvell_nfc_wait_cmdd(chip); | |
1754 | if (ret) | |
1755 | return ret; | |
1756 | ||
1757 | cond_delay(nfc_op.data_delay_ns); | |
1758 | ||
1759 | if (!reading) { | |
1760 | if (nfc_op.rdy_timeout_ms) { | |
1761 | ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms); | |
1762 | if (ret) | |
1763 | return ret; | |
1764 | } | |
1765 | ||
1766 | cond_delay(nfc_op.rdy_delay_ns); | |
1767 | } | |
1768 | ||
1769 | /* | |
1770 | * NDCR ND_RUN bit should be cleared automatically at the end of each | |
1771 | * operation but experience shows that the behavior is buggy when it | |
1772 | * comes to writes (with LEN_OVRD). Clear it by hand in this case. | |
1773 | */ | |
1774 | if (!reading) { | |
1775 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
1776 | ||
1777 | writel_relaxed(readl(nfc->regs + NDCR) & ~NDCR_ND_RUN, | |
1778 | nfc->regs + NDCR); | |
1779 | } | |
1780 | ||
1781 | return 0; | |
1782 | } | |
1783 | ||
1784 | static int marvell_nfc_naked_access_exec(struct nand_chip *chip, | |
1785 | const struct nand_subop *subop) | |
1786 | { | |
1787 | struct marvell_nfc_op nfc_op; | |
1788 | int ret; | |
1789 | ||
1790 | marvell_nfc_parse_instructions(chip, subop, &nfc_op); | |
1791 | ||
1792 | /* | |
1793 | * Naked access are different in that they need to be flagged as naked | |
1794 | * by the controller. Reset the controller registers fields that inform | |
1795 | * on the type and refill them according to the ongoing operation. | |
1796 | */ | |
1797 | nfc_op.ndcb[0] &= ~(NDCB0_CMD_TYPE(TYPE_MASK) | | |
1798 | NDCB0_CMD_XTYPE(XTYPE_MASK)); | |
1799 | switch (subop->instrs[0].type) { | |
1800 | case NAND_OP_CMD_INSTR: | |
1801 | nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_NAKED_CMD); | |
1802 | break; | |
1803 | case NAND_OP_ADDR_INSTR: | |
1804 | nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_NAKED_ADDR); | |
1805 | break; | |
1806 | case NAND_OP_DATA_IN_INSTR: | |
1807 | nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_READ) | | |
1808 | NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW); | |
1809 | break; | |
1810 | case NAND_OP_DATA_OUT_INSTR: | |
1811 | nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_WRITE) | | |
1812 | NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW); | |
1813 | break; | |
1814 | default: | |
1815 | /* This should never happen */ | |
1816 | break; | |
1817 | } | |
1818 | ||
1819 | ret = marvell_nfc_prepare_cmd(chip); | |
1820 | if (ret) | |
1821 | return ret; | |
1822 | ||
1823 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1824 | ||
1825 | if (!nfc_op.data_instr) { | |
1826 | ret = marvell_nfc_wait_cmdd(chip); | |
1827 | cond_delay(nfc_op.cle_ale_delay_ns); | |
1828 | return ret; | |
1829 | } | |
1830 | ||
1831 | ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ | NDSR_WRDREQ, | |
1832 | "RDDREQ/WRDREQ while draining raw data"); | |
1833 | if (ret) | |
1834 | return ret; | |
1835 | ||
1836 | marvell_nfc_xfer_data_pio(chip, subop, &nfc_op); | |
1837 | ret = marvell_nfc_wait_cmdd(chip); | |
1838 | if (ret) | |
1839 | return ret; | |
1840 | ||
1841 | /* | |
1842 | * NDCR ND_RUN bit should be cleared automatically at the end of each | |
1843 | * operation but experience shows that the behavior is buggy when it | |
1844 | * comes to writes (with LEN_OVRD). Clear it by hand in this case. | |
1845 | */ | |
1846 | if (subop->instrs[0].type == NAND_OP_DATA_OUT_INSTR) { | |
1847 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
1848 | ||
1849 | writel_relaxed(readl(nfc->regs + NDCR) & ~NDCR_ND_RUN, | |
1850 | nfc->regs + NDCR); | |
1851 | } | |
1852 | ||
1853 | return 0; | |
1854 | } | |
1855 | ||
1856 | static int marvell_nfc_naked_waitrdy_exec(struct nand_chip *chip, | |
1857 | const struct nand_subop *subop) | |
1858 | { | |
1859 | struct marvell_nfc_op nfc_op; | |
1860 | int ret; | |
1861 | ||
1862 | marvell_nfc_parse_instructions(chip, subop, &nfc_op); | |
1863 | ||
1864 | ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms); | |
1865 | cond_delay(nfc_op.rdy_delay_ns); | |
1866 | ||
1867 | return ret; | |
1868 | } | |
1869 | ||
1870 | static int marvell_nfc_read_id_type_exec(struct nand_chip *chip, | |
1871 | const struct nand_subop *subop) | |
1872 | { | |
1873 | struct marvell_nfc_op nfc_op; | |
1874 | int ret; | |
1875 | ||
1876 | marvell_nfc_parse_instructions(chip, subop, &nfc_op); | |
1877 | nfc_op.ndcb[0] &= ~NDCB0_CMD_TYPE(TYPE_READ); | |
1878 | nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_READ_ID); | |
1879 | ||
1880 | ret = marvell_nfc_prepare_cmd(chip); | |
1881 | if (ret) | |
1882 | return ret; | |
1883 | ||
1884 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1885 | ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ, | |
1886 | "RDDREQ while reading ID"); | |
1887 | if (ret) | |
1888 | return ret; | |
1889 | ||
1890 | cond_delay(nfc_op.cle_ale_delay_ns); | |
1891 | ||
1892 | if (nfc_op.rdy_timeout_ms) { | |
1893 | ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms); | |
1894 | if (ret) | |
1895 | return ret; | |
1896 | } | |
1897 | ||
1898 | cond_delay(nfc_op.rdy_delay_ns); | |
1899 | ||
1900 | marvell_nfc_xfer_data_pio(chip, subop, &nfc_op); | |
1901 | ret = marvell_nfc_wait_cmdd(chip); | |
1902 | if (ret) | |
1903 | return ret; | |
1904 | ||
1905 | cond_delay(nfc_op.data_delay_ns); | |
1906 | ||
1907 | return 0; | |
1908 | } | |
1909 | ||
1910 | static int marvell_nfc_read_status_exec(struct nand_chip *chip, | |
1911 | const struct nand_subop *subop) | |
1912 | { | |
1913 | struct marvell_nfc_op nfc_op; | |
1914 | int ret; | |
1915 | ||
1916 | marvell_nfc_parse_instructions(chip, subop, &nfc_op); | |
1917 | nfc_op.ndcb[0] &= ~NDCB0_CMD_TYPE(TYPE_READ); | |
1918 | nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_STATUS); | |
1919 | ||
1920 | ret = marvell_nfc_prepare_cmd(chip); | |
1921 | if (ret) | |
1922 | return ret; | |
1923 | ||
1924 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1925 | ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ, | |
1926 | "RDDREQ while reading status"); | |
1927 | if (ret) | |
1928 | return ret; | |
1929 | ||
1930 | cond_delay(nfc_op.cle_ale_delay_ns); | |
1931 | ||
1932 | if (nfc_op.rdy_timeout_ms) { | |
1933 | ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms); | |
1934 | if (ret) | |
1935 | return ret; | |
1936 | } | |
1937 | ||
1938 | cond_delay(nfc_op.rdy_delay_ns); | |
1939 | ||
1940 | marvell_nfc_xfer_data_pio(chip, subop, &nfc_op); | |
1941 | ret = marvell_nfc_wait_cmdd(chip); | |
1942 | if (ret) | |
1943 | return ret; | |
1944 | ||
1945 | cond_delay(nfc_op.data_delay_ns); | |
1946 | ||
1947 | return 0; | |
1948 | } | |
1949 | ||
1950 | static int marvell_nfc_reset_cmd_type_exec(struct nand_chip *chip, | |
1951 | const struct nand_subop *subop) | |
1952 | { | |
1953 | struct marvell_nfc_op nfc_op; | |
1954 | int ret; | |
1955 | ||
1956 | marvell_nfc_parse_instructions(chip, subop, &nfc_op); | |
1957 | nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_RESET); | |
1958 | ||
1959 | ret = marvell_nfc_prepare_cmd(chip); | |
1960 | if (ret) | |
1961 | return ret; | |
1962 | ||
1963 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1964 | ret = marvell_nfc_wait_cmdd(chip); | |
1965 | if (ret) | |
1966 | return ret; | |
1967 | ||
1968 | cond_delay(nfc_op.cle_ale_delay_ns); | |
1969 | ||
1970 | ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms); | |
1971 | if (ret) | |
1972 | return ret; | |
1973 | ||
1974 | cond_delay(nfc_op.rdy_delay_ns); | |
1975 | ||
1976 | return 0; | |
1977 | } | |
1978 | ||
1979 | static int marvell_nfc_erase_cmd_type_exec(struct nand_chip *chip, | |
1980 | const struct nand_subop *subop) | |
1981 | { | |
1982 | struct marvell_nfc_op nfc_op; | |
1983 | int ret; | |
1984 | ||
1985 | marvell_nfc_parse_instructions(chip, subop, &nfc_op); | |
1986 | nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_ERASE); | |
1987 | ||
1988 | ret = marvell_nfc_prepare_cmd(chip); | |
1989 | if (ret) | |
1990 | return ret; | |
1991 | ||
1992 | marvell_nfc_send_cmd(chip, &nfc_op); | |
1993 | ret = marvell_nfc_wait_cmdd(chip); | |
1994 | if (ret) | |
1995 | return ret; | |
1996 | ||
1997 | cond_delay(nfc_op.cle_ale_delay_ns); | |
1998 | ||
1999 | ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms); | |
2000 | if (ret) | |
2001 | return ret; | |
2002 | ||
2003 | cond_delay(nfc_op.rdy_delay_ns); | |
2004 | ||
2005 | return 0; | |
2006 | } | |
2007 | ||
2008 | static const struct nand_op_parser marvell_nfcv2_op_parser = NAND_OP_PARSER( | |
2009 | /* Monolithic reads/writes */ | |
2010 | NAND_OP_PARSER_PATTERN( | |
2011 | marvell_nfc_monolithic_access_exec, | |
2012 | NAND_OP_PARSER_PAT_CMD_ELEM(false), | |
2013 | NAND_OP_PARSER_PAT_ADDR_ELEM(true, MAX_ADDRESS_CYC_NFCV2), | |
2014 | NAND_OP_PARSER_PAT_CMD_ELEM(true), | |
2015 | NAND_OP_PARSER_PAT_WAITRDY_ELEM(true), | |
2016 | NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, MAX_CHUNK_SIZE)), | |
2017 | NAND_OP_PARSER_PATTERN( | |
2018 | marvell_nfc_monolithic_access_exec, | |
2019 | NAND_OP_PARSER_PAT_CMD_ELEM(false), | |
2020 | NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYC_NFCV2), | |
2021 | NAND_OP_PARSER_PAT_DATA_OUT_ELEM(false, MAX_CHUNK_SIZE), | |
2022 | NAND_OP_PARSER_PAT_CMD_ELEM(true), | |
2023 | NAND_OP_PARSER_PAT_WAITRDY_ELEM(true)), | |
2024 | /* Naked commands */ | |
2025 | NAND_OP_PARSER_PATTERN( | |
2026 | marvell_nfc_naked_access_exec, | |
2027 | NAND_OP_PARSER_PAT_CMD_ELEM(false)), | |
2028 | NAND_OP_PARSER_PATTERN( | |
2029 | marvell_nfc_naked_access_exec, | |
2030 | NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYC_NFCV2)), | |
2031 | NAND_OP_PARSER_PATTERN( | |
2032 | marvell_nfc_naked_access_exec, | |
2033 | NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, MAX_CHUNK_SIZE)), | |
2034 | NAND_OP_PARSER_PATTERN( | |
2035 | marvell_nfc_naked_access_exec, | |
2036 | NAND_OP_PARSER_PAT_DATA_OUT_ELEM(false, MAX_CHUNK_SIZE)), | |
2037 | NAND_OP_PARSER_PATTERN( | |
2038 | marvell_nfc_naked_waitrdy_exec, | |
2039 | NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)), | |
2040 | ); | |
2041 | ||
2042 | static const struct nand_op_parser marvell_nfcv1_op_parser = NAND_OP_PARSER( | |
2043 | /* Naked commands not supported, use a function for each pattern */ | |
2044 | NAND_OP_PARSER_PATTERN( | |
2045 | marvell_nfc_read_id_type_exec, | |
2046 | NAND_OP_PARSER_PAT_CMD_ELEM(false), | |
2047 | NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYC_NFCV1), | |
2048 | NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 8)), | |
2049 | NAND_OP_PARSER_PATTERN( | |
2050 | marvell_nfc_erase_cmd_type_exec, | |
2051 | NAND_OP_PARSER_PAT_CMD_ELEM(false), | |
2052 | NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYC_NFCV1), | |
2053 | NAND_OP_PARSER_PAT_CMD_ELEM(false), | |
2054 | NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)), | |
2055 | NAND_OP_PARSER_PATTERN( | |
2056 | marvell_nfc_read_status_exec, | |
2057 | NAND_OP_PARSER_PAT_CMD_ELEM(false), | |
2058 | NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 1)), | |
2059 | NAND_OP_PARSER_PATTERN( | |
2060 | marvell_nfc_reset_cmd_type_exec, | |
2061 | NAND_OP_PARSER_PAT_CMD_ELEM(false), | |
2062 | NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)), | |
2063 | NAND_OP_PARSER_PATTERN( | |
2064 | marvell_nfc_naked_waitrdy_exec, | |
2065 | NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)), | |
2066 | ); | |
2067 | ||
2068 | static int marvell_nfc_exec_op(struct nand_chip *chip, | |
2069 | const struct nand_operation *op, | |
2070 | bool check_only) | |
2071 | { | |
2072 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
2073 | ||
2074 | if (nfc->caps->is_nfcv2) | |
2075 | return nand_op_parser_exec_op(chip, &marvell_nfcv2_op_parser, | |
2076 | op, check_only); | |
2077 | else | |
2078 | return nand_op_parser_exec_op(chip, &marvell_nfcv1_op_parser, | |
2079 | op, check_only); | |
2080 | } | |
2081 | ||
2082 | /* | |
2083 | * Layouts were broken in old pxa3xx_nand driver, these are supposed to be | |
2084 | * usable. | |
2085 | */ | |
2086 | static int marvell_nand_ooblayout_ecc(struct mtd_info *mtd, int section, | |
2087 | struct mtd_oob_region *oobregion) | |
2088 | { | |
2089 | struct nand_chip *chip = mtd_to_nand(mtd); | |
2090 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
2091 | ||
2092 | if (section) | |
2093 | return -ERANGE; | |
2094 | ||
2095 | oobregion->length = (lt->full_chunk_cnt * lt->ecc_bytes) + | |
2096 | lt->last_ecc_bytes; | |
2097 | oobregion->offset = mtd->oobsize - oobregion->length; | |
2098 | ||
2099 | return 0; | |
2100 | } | |
2101 | ||
2102 | static int marvell_nand_ooblayout_free(struct mtd_info *mtd, int section, | |
2103 | struct mtd_oob_region *oobregion) | |
2104 | { | |
2105 | struct nand_chip *chip = mtd_to_nand(mtd); | |
2106 | const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; | |
2107 | ||
2108 | if (section) | |
2109 | return -ERANGE; | |
2110 | ||
2111 | /* | |
2112 | * Bootrom looks in bytes 0 & 5 for bad blocks for the | |
2113 | * 4KB page / 4bit BCH combination. | |
2114 | */ | |
2115 | if (mtd->writesize == SZ_4K && lt->data_bytes == SZ_2K) | |
2116 | oobregion->offset = 6; | |
2117 | else | |
2118 | oobregion->offset = 2; | |
2119 | ||
2120 | oobregion->length = (lt->full_chunk_cnt * lt->spare_bytes) + | |
2121 | lt->last_spare_bytes - oobregion->offset; | |
2122 | ||
2123 | return 0; | |
2124 | } | |
2125 | ||
2126 | static const struct mtd_ooblayout_ops marvell_nand_ooblayout_ops = { | |
2127 | .ecc = marvell_nand_ooblayout_ecc, | |
2128 | .free = marvell_nand_ooblayout_free, | |
2129 | }; | |
2130 | ||
2131 | static int marvell_nand_hw_ecc_ctrl_init(struct mtd_info *mtd, | |
2132 | struct nand_ecc_ctrl *ecc) | |
2133 | { | |
2134 | struct nand_chip *chip = mtd_to_nand(mtd); | |
2135 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
2136 | const struct marvell_hw_ecc_layout *l; | |
2137 | int i; | |
2138 | ||
2139 | if (!nfc->caps->is_nfcv2 && | |
2140 | (mtd->writesize + mtd->oobsize > MAX_CHUNK_SIZE)) { | |
2141 | dev_err(nfc->dev, | |
2142 | "NFCv1: writesize (%d) cannot be bigger than a chunk (%d)\n", | |
2143 | mtd->writesize, MAX_CHUNK_SIZE - mtd->oobsize); | |
2144 | return -ENOTSUPP; | |
2145 | } | |
2146 | ||
2147 | to_marvell_nand(chip)->layout = NULL; | |
2148 | for (i = 0; i < ARRAY_SIZE(marvell_nfc_layouts); i++) { | |
2149 | l = &marvell_nfc_layouts[i]; | |
2150 | if (mtd->writesize == l->writesize && | |
2151 | ecc->size == l->chunk && ecc->strength == l->strength) { | |
2152 | to_marvell_nand(chip)->layout = l; | |
2153 | break; | |
2154 | } | |
2155 | } | |
2156 | ||
2157 | if (!to_marvell_nand(chip)->layout || | |
2158 | (!nfc->caps->is_nfcv2 && ecc->strength > 1)) { | |
2159 | dev_err(nfc->dev, | |
2160 | "ECC strength %d at page size %d is not supported\n", | |
2161 | ecc->strength, mtd->writesize); | |
2162 | return -ENOTSUPP; | |
2163 | } | |
2164 | ||
2165 | mtd_set_ooblayout(mtd, &marvell_nand_ooblayout_ops); | |
2166 | ecc->steps = l->nchunks; | |
2167 | ecc->size = l->data_bytes; | |
2168 | ||
2169 | if (ecc->strength == 1) { | |
2170 | chip->ecc.algo = NAND_ECC_HAMMING; | |
2171 | ecc->read_page_raw = marvell_nfc_hw_ecc_hmg_read_page_raw; | |
2172 | ecc->read_page = marvell_nfc_hw_ecc_hmg_read_page; | |
2173 | ecc->read_oob_raw = marvell_nfc_hw_ecc_hmg_read_oob_raw; | |
2174 | ecc->read_oob = ecc->read_oob_raw; | |
2175 | ecc->write_page_raw = marvell_nfc_hw_ecc_hmg_write_page_raw; | |
2176 | ecc->write_page = marvell_nfc_hw_ecc_hmg_write_page; | |
2177 | ecc->write_oob_raw = marvell_nfc_hw_ecc_hmg_write_oob_raw; | |
2178 | ecc->write_oob = ecc->write_oob_raw; | |
2179 | } else { | |
2180 | chip->ecc.algo = NAND_ECC_BCH; | |
2181 | ecc->strength = 16; | |
2182 | ecc->read_page_raw = marvell_nfc_hw_ecc_bch_read_page_raw; | |
2183 | ecc->read_page = marvell_nfc_hw_ecc_bch_read_page; | |
2184 | ecc->read_oob_raw = marvell_nfc_hw_ecc_bch_read_oob_raw; | |
2185 | ecc->read_oob = marvell_nfc_hw_ecc_bch_read_oob; | |
2186 | ecc->write_page_raw = marvell_nfc_hw_ecc_bch_write_page_raw; | |
2187 | ecc->write_page = marvell_nfc_hw_ecc_bch_write_page; | |
2188 | ecc->write_oob_raw = marvell_nfc_hw_ecc_bch_write_oob_raw; | |
2189 | ecc->write_oob = marvell_nfc_hw_ecc_bch_write_oob; | |
2190 | } | |
2191 | ||
2192 | return 0; | |
2193 | } | |
2194 | ||
2195 | static int marvell_nand_ecc_init(struct mtd_info *mtd, | |
2196 | struct nand_ecc_ctrl *ecc) | |
2197 | { | |
2198 | struct nand_chip *chip = mtd_to_nand(mtd); | |
2199 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
2200 | int ret; | |
2201 | ||
2202 | if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) { | |
2203 | if (chip->ecc_step_ds && chip->ecc_strength_ds) { | |
2204 | ecc->size = chip->ecc_step_ds; | |
2205 | ecc->strength = chip->ecc_strength_ds; | |
2206 | } else { | |
2207 | dev_info(nfc->dev, | |
2208 | "No minimum ECC strength, using 1b/512B\n"); | |
2209 | ecc->size = 512; | |
2210 | ecc->strength = 1; | |
2211 | } | |
2212 | } | |
2213 | ||
2214 | switch (ecc->mode) { | |
2215 | case NAND_ECC_HW: | |
2216 | ret = marvell_nand_hw_ecc_ctrl_init(mtd, ecc); | |
2217 | if (ret) | |
2218 | return ret; | |
2219 | break; | |
2220 | case NAND_ECC_NONE: | |
2221 | case NAND_ECC_SOFT: | |
ed6d0285 | 2222 | case NAND_ECC_ON_DIE: |
02f26ecf MR |
2223 | if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 && |
2224 | mtd->writesize != SZ_2K) { | |
2225 | dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n", | |
2226 | mtd->writesize); | |
2227 | return -EINVAL; | |
2228 | } | |
2229 | break; | |
2230 | default: | |
2231 | return -EINVAL; | |
2232 | } | |
2233 | ||
2234 | return 0; | |
2235 | } | |
2236 | ||
2237 | static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' }; | |
2238 | static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' }; | |
2239 | ||
2240 | static struct nand_bbt_descr bbt_main_descr = { | |
2241 | .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | | |
2242 | NAND_BBT_2BIT | NAND_BBT_VERSION, | |
2243 | .offs = 8, | |
2244 | .len = 6, | |
2245 | .veroffs = 14, | |
2246 | .maxblocks = 8, /* Last 8 blocks in each chip */ | |
2247 | .pattern = bbt_pattern | |
2248 | }; | |
2249 | ||
2250 | static struct nand_bbt_descr bbt_mirror_descr = { | |
2251 | .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | | |
2252 | NAND_BBT_2BIT | NAND_BBT_VERSION, | |
2253 | .offs = 8, | |
2254 | .len = 6, | |
2255 | .veroffs = 14, | |
2256 | .maxblocks = 8, /* Last 8 blocks in each chip */ | |
2257 | .pattern = bbt_mirror_pattern | |
2258 | }; | |
2259 | ||
2260 | static int marvell_nfc_setup_data_interface(struct mtd_info *mtd, int chipnr, | |
2261 | const struct nand_data_interface | |
2262 | *conf) | |
2263 | { | |
2264 | struct nand_chip *chip = mtd_to_nand(mtd); | |
2265 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
2266 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
6b6de654 | 2267 | unsigned int period_ns = 1000000000 / clk_get_rate(nfc->core_clk) * 2; |
02f26ecf MR |
2268 | const struct nand_sdr_timings *sdr; |
2269 | struct marvell_nfc_timings nfc_tmg; | |
2270 | int read_delay; | |
2271 | ||
2272 | sdr = nand_get_sdr_timings(conf); | |
2273 | if (IS_ERR(sdr)) | |
2274 | return PTR_ERR(sdr); | |
2275 | ||
2276 | /* | |
2277 | * SDR timings are given in pico-seconds while NFC timings must be | |
2278 | * expressed in NAND controller clock cycles, which is half of the | |
2279 | * frequency of the accessible ECC clock retrieved by clk_get_rate(). | |
2280 | * This is not written anywhere in the datasheet but was observed | |
2281 | * with an oscilloscope. | |
2282 | * | |
2283 | * NFC datasheet gives equations from which thoses calculations | |
2284 | * are derived, they tend to be slightly more restrictives than the | |
2285 | * given core timings and may improve the overall speed. | |
2286 | */ | |
2287 | nfc_tmg.tRP = TO_CYCLES(DIV_ROUND_UP(sdr->tRC_min, 2), period_ns) - 1; | |
2288 | nfc_tmg.tRH = nfc_tmg.tRP; | |
2289 | nfc_tmg.tWP = TO_CYCLES(DIV_ROUND_UP(sdr->tWC_min, 2), period_ns) - 1; | |
2290 | nfc_tmg.tWH = nfc_tmg.tWP; | |
2291 | nfc_tmg.tCS = TO_CYCLES(sdr->tCS_min, period_ns); | |
2292 | nfc_tmg.tCH = TO_CYCLES(sdr->tCH_min, period_ns) - 1; | |
2293 | nfc_tmg.tADL = TO_CYCLES(sdr->tADL_min, period_ns); | |
2294 | /* | |
2295 | * Read delay is the time of propagation from SoC pins to NFC internal | |
2296 | * logic. With non-EDO timings, this is MIN_RD_DEL_CNT clock cycles. In | |
2297 | * EDO mode, an additional delay of tRH must be taken into account so | |
2298 | * the data is sampled on the falling edge instead of the rising edge. | |
2299 | */ | |
2300 | read_delay = sdr->tRC_min >= 30000 ? | |
2301 | MIN_RD_DEL_CNT : MIN_RD_DEL_CNT + nfc_tmg.tRH; | |
2302 | ||
2303 | nfc_tmg.tAR = TO_CYCLES(sdr->tAR_min, period_ns); | |
2304 | /* | |
2305 | * tWHR and tRHW are supposed to be read to write delays (and vice | |
2306 | * versa) but in some cases, ie. when doing a change column, they must | |
2307 | * be greater than that to be sure tCCS delay is respected. | |
2308 | */ | |
2309 | nfc_tmg.tWHR = TO_CYCLES(max_t(int, sdr->tWHR_min, sdr->tCCS_min), | |
2310 | period_ns) - 2, | |
2311 | nfc_tmg.tRHW = TO_CYCLES(max_t(int, sdr->tRHW_min, sdr->tCCS_min), | |
2312 | period_ns); | |
2313 | ||
07ad5a72 MR |
2314 | /* |
2315 | * NFCv2: Use WAIT_MODE (wait for RB line), do not rely only on delays. | |
2316 | * NFCv1: No WAIT_MODE, tR must be maximal. | |
2317 | */ | |
2318 | if (nfc->caps->is_nfcv2) { | |
2319 | nfc_tmg.tR = TO_CYCLES(sdr->tWB_max, period_ns); | |
2320 | } else { | |
2321 | nfc_tmg.tR = TO_CYCLES64(sdr->tWB_max + sdr->tR_max, | |
2322 | period_ns); | |
2323 | if (nfc_tmg.tR + 3 > nfc_tmg.tCH) | |
2324 | nfc_tmg.tR = nfc_tmg.tCH - 3; | |
2325 | else | |
2326 | nfc_tmg.tR = 0; | |
2327 | } | |
02f26ecf MR |
2328 | |
2329 | if (chipnr < 0) | |
2330 | return 0; | |
2331 | ||
2332 | marvell_nand->ndtr0 = | |
2333 | NDTR0_TRP(nfc_tmg.tRP) | | |
2334 | NDTR0_TRH(nfc_tmg.tRH) | | |
2335 | NDTR0_ETRP(nfc_tmg.tRP) | | |
2336 | NDTR0_TWP(nfc_tmg.tWP) | | |
2337 | NDTR0_TWH(nfc_tmg.tWH) | | |
2338 | NDTR0_TCS(nfc_tmg.tCS) | | |
07ad5a72 | 2339 | NDTR0_TCH(nfc_tmg.tCH); |
02f26ecf MR |
2340 | |
2341 | marvell_nand->ndtr1 = | |
2342 | NDTR1_TAR(nfc_tmg.tAR) | | |
2343 | NDTR1_TWHR(nfc_tmg.tWHR) | | |
02f26ecf MR |
2344 | NDTR1_TR(nfc_tmg.tR); |
2345 | ||
07ad5a72 MR |
2346 | if (nfc->caps->is_nfcv2) { |
2347 | marvell_nand->ndtr0 |= | |
2348 | NDTR0_RD_CNT_DEL(read_delay) | | |
2349 | NDTR0_SELCNTR | | |
2350 | NDTR0_TADL(nfc_tmg.tADL); | |
2351 | ||
2352 | marvell_nand->ndtr1 |= | |
2353 | NDTR1_TRHW(nfc_tmg.tRHW) | | |
2354 | NDTR1_WAIT_MODE; | |
2355 | } | |
2356 | ||
02f26ecf MR |
2357 | return 0; |
2358 | } | |
2359 | ||
8831e48b MR |
2360 | static int marvell_nand_attach_chip(struct nand_chip *chip) |
2361 | { | |
2362 | struct mtd_info *mtd = nand_to_mtd(chip); | |
2363 | struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); | |
2364 | struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); | |
2365 | struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(nfc->dev); | |
2366 | int ret; | |
2367 | ||
2368 | if (pdata && pdata->flash_bbt) | |
2369 | chip->bbt_options |= NAND_BBT_USE_FLASH; | |
2370 | ||
2371 | if (chip->bbt_options & NAND_BBT_USE_FLASH) { | |
2372 | /* | |
2373 | * We'll use a bad block table stored in-flash and don't | |
2374 | * allow writing the bad block marker to the flash. | |
2375 | */ | |
2376 | chip->bbt_options |= NAND_BBT_NO_OOB_BBM; | |
2377 | chip->bbt_td = &bbt_main_descr; | |
2378 | chip->bbt_md = &bbt_mirror_descr; | |
2379 | } | |
2380 | ||
2381 | /* Save the chip-specific fields of NDCR */ | |
2382 | marvell_nand->ndcr = NDCR_PAGE_SZ(mtd->writesize); | |
2383 | if (chip->options & NAND_BUSWIDTH_16) | |
2384 | marvell_nand->ndcr |= NDCR_DWIDTH_M | NDCR_DWIDTH_C; | |
2385 | ||
2386 | /* | |
2387 | * On small page NANDs, only one cycle is needed to pass the | |
2388 | * column address. | |
2389 | */ | |
2390 | if (mtd->writesize <= 512) { | |
2391 | marvell_nand->addr_cyc = 1; | |
2392 | } else { | |
2393 | marvell_nand->addr_cyc = 2; | |
2394 | marvell_nand->ndcr |= NDCR_RA_START; | |
2395 | } | |
2396 | ||
2397 | /* | |
2398 | * Now add the number of cycles needed to pass the row | |
2399 | * address. | |
2400 | * | |
2401 | * Addressing a chip using CS 2 or 3 should also need the third row | |
2402 | * cycle but due to inconsistance in the documentation and lack of | |
2403 | * hardware to test this situation, this case is not supported. | |
2404 | */ | |
2405 | if (chip->options & NAND_ROW_ADDR_3) | |
2406 | marvell_nand->addr_cyc += 3; | |
2407 | else | |
2408 | marvell_nand->addr_cyc += 2; | |
2409 | ||
2410 | if (pdata) { | |
2411 | chip->ecc.size = pdata->ecc_step_size; | |
2412 | chip->ecc.strength = pdata->ecc_strength; | |
2413 | } | |
2414 | ||
2415 | ret = marvell_nand_ecc_init(mtd, &chip->ecc); | |
2416 | if (ret) { | |
2417 | dev_err(nfc->dev, "ECC init failed: %d\n", ret); | |
2418 | return ret; | |
2419 | } | |
2420 | ||
2421 | if (chip->ecc.mode == NAND_ECC_HW) { | |
2422 | /* | |
2423 | * Subpage write not available with hardware ECC, prohibit also | |
2424 | * subpage read as in userspace subpage access would still be | |
2425 | * allowed and subpage write, if used, would lead to numerous | |
2426 | * uncorrectable ECC errors. | |
2427 | */ | |
2428 | chip->options |= NAND_NO_SUBPAGE_WRITE; | |
2429 | } | |
2430 | ||
2431 | if (pdata || nfc->caps->legacy_of_bindings) { | |
2432 | /* | |
2433 | * We keep the MTD name unchanged to avoid breaking platforms | |
2434 | * where the MTD cmdline parser is used and the bootloader | |
2435 | * has not been updated to use the new naming scheme. | |
2436 | */ | |
2437 | mtd->name = "pxa3xx_nand-0"; | |
2438 | } else if (!mtd->name) { | |
2439 | /* | |
2440 | * If the new bindings are used and the bootloader has not been | |
2441 | * updated to pass a new mtdparts parameter on the cmdline, you | |
2442 | * should define the following property in your NAND node, ie: | |
2443 | * | |
2444 | * label = "main-storage"; | |
2445 | * | |
2446 | * This way, mtd->name will be set by the core when | |
2447 | * nand_set_flash_node() is called. | |
2448 | */ | |
2449 | mtd->name = devm_kasprintf(nfc->dev, GFP_KERNEL, | |
2450 | "%s:nand.%d", dev_name(nfc->dev), | |
2451 | marvell_nand->sels[0].cs); | |
2452 | if (!mtd->name) { | |
2453 | dev_err(nfc->dev, "Failed to allocate mtd->name\n"); | |
2454 | return -ENOMEM; | |
2455 | } | |
2456 | } | |
2457 | ||
2458 | return 0; | |
2459 | } | |
2460 | ||
2461 | static const struct nand_controller_ops marvell_nand_controller_ops = { | |
2462 | .attach_chip = marvell_nand_attach_chip, | |
2463 | }; | |
2464 | ||
02f26ecf MR |
2465 | static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc, |
2466 | struct device_node *np) | |
2467 | { | |
2468 | struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(dev); | |
2469 | struct marvell_nand_chip *marvell_nand; | |
2470 | struct mtd_info *mtd; | |
2471 | struct nand_chip *chip; | |
2472 | int nsels, ret, i; | |
2473 | u32 cs, rb; | |
2474 | ||
2475 | /* | |
2476 | * The legacy "num-cs" property indicates the number of CS on the only | |
2477 | * chip connected to the controller (legacy bindings does not support | |
f6997bec | 2478 | * more than one chip). The CS and RB pins are always the #0. |
02f26ecf MR |
2479 | * |
2480 | * When not using legacy bindings, a couple of "reg" and "nand-rb" | |
2481 | * properties must be filled. For each chip, expressed as a subnode, | |
2482 | * "reg" points to the CS lines and "nand-rb" to the RB line. | |
2483 | */ | |
f6997bec | 2484 | if (pdata || nfc->caps->legacy_of_bindings) { |
02f26ecf | 2485 | nsels = 1; |
f6997bec MR |
2486 | } else { |
2487 | nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32)); | |
2488 | if (nsels <= 0) { | |
2489 | dev_err(dev, "missing/invalid reg property\n"); | |
2490 | return -EINVAL; | |
2491 | } | |
02f26ecf MR |
2492 | } |
2493 | ||
2494 | /* Alloc the nand chip structure */ | |
2495 | marvell_nand = devm_kzalloc(dev, sizeof(*marvell_nand) + | |
2496 | (nsels * | |
2497 | sizeof(struct marvell_nand_chip_sel)), | |
2498 | GFP_KERNEL); | |
2499 | if (!marvell_nand) { | |
2500 | dev_err(dev, "could not allocate chip structure\n"); | |
2501 | return -ENOMEM; | |
2502 | } | |
2503 | ||
2504 | marvell_nand->nsels = nsels; | |
2505 | marvell_nand->selected_die = -1; | |
2506 | ||
2507 | for (i = 0; i < nsels; i++) { | |
2508 | if (pdata || nfc->caps->legacy_of_bindings) { | |
2509 | /* | |
2510 | * Legacy bindings use the CS lines in natural | |
2511 | * order (0, 1, ...) | |
2512 | */ | |
2513 | cs = i; | |
2514 | } else { | |
2515 | /* Retrieve CS id */ | |
2516 | ret = of_property_read_u32_index(np, "reg", i, &cs); | |
2517 | if (ret) { | |
2518 | dev_err(dev, "could not retrieve reg property: %d\n", | |
2519 | ret); | |
2520 | return ret; | |
2521 | } | |
2522 | } | |
2523 | ||
2524 | if (cs >= nfc->caps->max_cs_nb) { | |
2525 | dev_err(dev, "invalid reg value: %u (max CS = %d)\n", | |
2526 | cs, nfc->caps->max_cs_nb); | |
2527 | return -EINVAL; | |
2528 | } | |
2529 | ||
2530 | if (test_and_set_bit(cs, &nfc->assigned_cs)) { | |
2531 | dev_err(dev, "CS %d already assigned\n", cs); | |
2532 | return -EINVAL; | |
2533 | } | |
2534 | ||
2535 | /* | |
2536 | * The cs variable represents the chip select id, which must be | |
2537 | * converted in bit fields for NDCB0 and NDCB2 to select the | |
2538 | * right chip. Unfortunately, due to a lack of information on | |
2539 | * the subject and incoherent documentation, the user should not | |
2540 | * use CS1 and CS3 at all as asserting them is not supported in | |
2541 | * a reliable way (due to multiplexing inside ADDR5 field). | |
2542 | */ | |
2543 | marvell_nand->sels[i].cs = cs; | |
2544 | switch (cs) { | |
2545 | case 0: | |
2546 | case 2: | |
2547 | marvell_nand->sels[i].ndcb0_csel = 0; | |
2548 | break; | |
2549 | case 1: | |
2550 | case 3: | |
2551 | marvell_nand->sels[i].ndcb0_csel = NDCB0_CSEL; | |
2552 | break; | |
2553 | default: | |
2554 | return -EINVAL; | |
2555 | } | |
2556 | ||
2557 | /* Retrieve RB id */ | |
2558 | if (pdata || nfc->caps->legacy_of_bindings) { | |
2559 | /* Legacy bindings always use RB #0 */ | |
2560 | rb = 0; | |
2561 | } else { | |
2562 | ret = of_property_read_u32_index(np, "nand-rb", i, | |
2563 | &rb); | |
2564 | if (ret) { | |
2565 | dev_err(dev, | |
2566 | "could not retrieve RB property: %d\n", | |
2567 | ret); | |
2568 | return ret; | |
2569 | } | |
2570 | } | |
2571 | ||
2572 | if (rb >= nfc->caps->max_rb_nb) { | |
2573 | dev_err(dev, "invalid reg value: %u (max RB = %d)\n", | |
2574 | rb, nfc->caps->max_rb_nb); | |
2575 | return -EINVAL; | |
2576 | } | |
2577 | ||
2578 | marvell_nand->sels[i].rb = rb; | |
2579 | } | |
2580 | ||
2581 | chip = &marvell_nand->chip; | |
2582 | chip->controller = &nfc->controller; | |
2583 | nand_set_flash_node(chip, np); | |
2584 | ||
2585 | chip->exec_op = marvell_nfc_exec_op; | |
2586 | chip->select_chip = marvell_nfc_select_chip; | |
07ad5a72 | 2587 | if (!of_property_read_bool(np, "marvell,nand-keep-config")) |
02f26ecf MR |
2588 | chip->setup_data_interface = marvell_nfc_setup_data_interface; |
2589 | ||
2590 | mtd = nand_to_mtd(chip); | |
2591 | mtd->dev.parent = dev; | |
2592 | ||
2593 | /* | |
2594 | * Default to HW ECC engine mode. If the nand-ecc-mode property is given | |
2595 | * in the DT node, this entry will be overwritten in nand_scan_ident(). | |
2596 | */ | |
2597 | chip->ecc.mode = NAND_ECC_HW; | |
2598 | ||
2599 | /* | |
2600 | * Save a reference value for timing registers before | |
2601 | * ->setup_data_interface() is called. | |
2602 | */ | |
2603 | marvell_nand->ndtr0 = readl_relaxed(nfc->regs + NDTR0); | |
2604 | marvell_nand->ndtr1 = readl_relaxed(nfc->regs + NDTR1); | |
2605 | ||
2606 | chip->options |= NAND_BUSWIDTH_AUTO; | |
02f26ecf | 2607 | |
00ad378f | 2608 | ret = nand_scan(chip, marvell_nand->nsels); |
02f26ecf | 2609 | if (ret) { |
8831e48b | 2610 | dev_err(dev, "could not scan the nand chip\n"); |
02f26ecf MR |
2611 | return ret; |
2612 | } | |
2613 | ||
2614 | if (pdata) | |
2615 | /* Legacy bindings support only one chip */ | |
7576594c | 2616 | ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts); |
02f26ecf MR |
2617 | else |
2618 | ret = mtd_device_register(mtd, NULL, 0); | |
2619 | if (ret) { | |
2620 | dev_err(dev, "failed to register mtd device: %d\n", ret); | |
59ac276f | 2621 | nand_release(chip); |
02f26ecf MR |
2622 | return ret; |
2623 | } | |
2624 | ||
2625 | list_add_tail(&marvell_nand->node, &nfc->chips); | |
2626 | ||
2627 | return 0; | |
2628 | } | |
2629 | ||
2630 | static int marvell_nand_chips_init(struct device *dev, struct marvell_nfc *nfc) | |
2631 | { | |
2632 | struct device_node *np = dev->of_node; | |
2633 | struct device_node *nand_np; | |
2634 | int max_cs = nfc->caps->max_cs_nb; | |
2635 | int nchips; | |
2636 | int ret; | |
2637 | ||
2638 | if (!np) | |
2639 | nchips = 1; | |
2640 | else | |
2641 | nchips = of_get_child_count(np); | |
2642 | ||
2643 | if (nchips > max_cs) { | |
2644 | dev_err(dev, "too many NAND chips: %d (max = %d CS)\n", nchips, | |
2645 | max_cs); | |
2646 | return -EINVAL; | |
2647 | } | |
2648 | ||
2649 | /* | |
2650 | * Legacy bindings do not use child nodes to exhibit NAND chip | |
2651 | * properties and layout. Instead, NAND properties are mixed with the | |
2652 | * controller ones, and partitions are defined as direct subnodes of the | |
2653 | * NAND controller node. | |
2654 | */ | |
2655 | if (nfc->caps->legacy_of_bindings) { | |
2656 | ret = marvell_nand_chip_init(dev, nfc, np); | |
2657 | return ret; | |
2658 | } | |
2659 | ||
2660 | for_each_child_of_node(np, nand_np) { | |
2661 | ret = marvell_nand_chip_init(dev, nfc, nand_np); | |
2662 | if (ret) { | |
2663 | of_node_put(nand_np); | |
2664 | return ret; | |
2665 | } | |
2666 | } | |
2667 | ||
2668 | return 0; | |
2669 | } | |
2670 | ||
2671 | static void marvell_nand_chips_cleanup(struct marvell_nfc *nfc) | |
2672 | { | |
2673 | struct marvell_nand_chip *entry, *temp; | |
2674 | ||
2675 | list_for_each_entry_safe(entry, temp, &nfc->chips, node) { | |
59ac276f | 2676 | nand_release(&entry->chip); |
02f26ecf MR |
2677 | list_del(&entry->node); |
2678 | } | |
2679 | } | |
2680 | ||
2681 | static int marvell_nfc_init_dma(struct marvell_nfc *nfc) | |
2682 | { | |
2683 | struct platform_device *pdev = container_of(nfc->dev, | |
2684 | struct platform_device, | |
2685 | dev); | |
2686 | struct dma_slave_config config = {}; | |
2687 | struct resource *r; | |
02f26ecf MR |
2688 | int ret; |
2689 | ||
2690 | if (!IS_ENABLED(CONFIG_PXA_DMA)) { | |
2691 | dev_warn(nfc->dev, | |
2692 | "DMA not enabled in configuration\n"); | |
2693 | return -ENOTSUPP; | |
2694 | } | |
2695 | ||
2696 | ret = dma_set_mask_and_coherent(nfc->dev, DMA_BIT_MASK(32)); | |
2697 | if (ret) | |
2698 | return ret; | |
2699 | ||
ac75a50b | 2700 | nfc->dma_chan = dma_request_slave_channel(nfc->dev, "data"); |
02f26ecf MR |
2701 | if (!nfc->dma_chan) { |
2702 | dev_err(nfc->dev, | |
2703 | "Unable to request data DMA channel\n"); | |
2704 | return -ENODEV; | |
2705 | } | |
2706 | ||
2707 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
2708 | if (!r) | |
2709 | return -ENXIO; | |
2710 | ||
2711 | config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; | |
2712 | config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; | |
2713 | config.src_addr = r->start + NDDB; | |
2714 | config.dst_addr = r->start + NDDB; | |
2715 | config.src_maxburst = 32; | |
2716 | config.dst_maxburst = 32; | |
2717 | ret = dmaengine_slave_config(nfc->dma_chan, &config); | |
2718 | if (ret < 0) { | |
2719 | dev_err(nfc->dev, "Failed to configure DMA channel\n"); | |
2720 | return ret; | |
2721 | } | |
2722 | ||
2723 | /* | |
2724 | * DMA must act on length multiple of 32 and this length may be | |
2725 | * bigger than the destination buffer. Use this buffer instead | |
2726 | * for DMA transfers and then copy the desired amount of data to | |
2727 | * the provided buffer. | |
2728 | */ | |
c495a927 | 2729 | nfc->dma_buf = kmalloc(MAX_CHUNK_SIZE, GFP_KERNEL | GFP_DMA); |
02f26ecf MR |
2730 | if (!nfc->dma_buf) |
2731 | return -ENOMEM; | |
2732 | ||
2733 | nfc->use_dma = true; | |
2734 | ||
2735 | return 0; | |
2736 | } | |
2737 | ||
bd9c3f9b DM |
2738 | static void marvell_nfc_reset(struct marvell_nfc *nfc) |
2739 | { | |
2740 | /* | |
2741 | * ECC operations and interruptions are only enabled when specifically | |
2742 | * needed. ECC shall not be activated in the early stages (fails probe). | |
2743 | * Arbiter flag, even if marked as "reserved", must be set (empirical). | |
2744 | * SPARE_EN bit must always be set or ECC bytes will not be at the same | |
2745 | * offset in the read page and this will fail the protection. | |
2746 | */ | |
2747 | writel_relaxed(NDCR_ALL_INT | NDCR_ND_ARB_EN | NDCR_SPARE_EN | | |
2748 | NDCR_RD_ID_CNT(NFCV1_READID_LEN), nfc->regs + NDCR); | |
2749 | writel_relaxed(0xFFFFFFFF, nfc->regs + NDSR); | |
2750 | writel_relaxed(0, nfc->regs + NDECCCTRL); | |
2751 | } | |
2752 | ||
02f26ecf MR |
2753 | static int marvell_nfc_init(struct marvell_nfc *nfc) |
2754 | { | |
2755 | struct device_node *np = nfc->dev->of_node; | |
2756 | ||
2757 | /* | |
2758 | * Some SoCs like A7k/A8k need to enable manually the NAND | |
2759 | * controller, gated clocks and reset bits to avoid being bootloader | |
2760 | * dependent. This is done through the use of the System Functions | |
2761 | * registers. | |
2762 | */ | |
2763 | if (nfc->caps->need_system_controller) { | |
2764 | struct regmap *sysctrl_base = | |
2765 | syscon_regmap_lookup_by_phandle(np, | |
2766 | "marvell,system-controller"); | |
02f26ecf MR |
2767 | |
2768 | if (IS_ERR(sysctrl_base)) | |
2769 | return PTR_ERR(sysctrl_base); | |
2770 | ||
88aa3bbf TP |
2771 | regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, |
2772 | GENCONF_SOC_DEVICE_MUX_NFC_EN | | |
2773 | GENCONF_SOC_DEVICE_MUX_ECC_CLK_RST | | |
2774 | GENCONF_SOC_DEVICE_MUX_ECC_CORE_RST | | |
2775 | GENCONF_SOC_DEVICE_MUX_NFC_INT_EN); | |
02f26ecf | 2776 | |
88aa3bbf TP |
2777 | regmap_update_bits(sysctrl_base, GENCONF_CLK_GATING_CTRL, |
2778 | GENCONF_CLK_GATING_CTRL_ND_GATE, | |
2779 | GENCONF_CLK_GATING_CTRL_ND_GATE); | |
02f26ecf | 2780 | |
88aa3bbf TP |
2781 | regmap_update_bits(sysctrl_base, GENCONF_ND_CLK_CTRL, |
2782 | GENCONF_ND_CLK_CTRL_EN, | |
2783 | GENCONF_ND_CLK_CTRL_EN); | |
02f26ecf MR |
2784 | } |
2785 | ||
2786 | /* Configure the DMA if appropriate */ | |
2787 | if (!nfc->caps->is_nfcv2) | |
2788 | marvell_nfc_init_dma(nfc); | |
2789 | ||
bd9c3f9b | 2790 | marvell_nfc_reset(nfc); |
02f26ecf MR |
2791 | |
2792 | return 0; | |
2793 | } | |
2794 | ||
2795 | static int marvell_nfc_probe(struct platform_device *pdev) | |
2796 | { | |
2797 | struct device *dev = &pdev->dev; | |
2798 | struct resource *r; | |
2799 | struct marvell_nfc *nfc; | |
2800 | int ret; | |
2801 | int irq; | |
2802 | ||
2803 | nfc = devm_kzalloc(&pdev->dev, sizeof(struct marvell_nfc), | |
2804 | GFP_KERNEL); | |
2805 | if (!nfc) | |
2806 | return -ENOMEM; | |
2807 | ||
2808 | nfc->dev = dev; | |
7da45139 | 2809 | nand_controller_init(&nfc->controller); |
8831e48b | 2810 | nfc->controller.ops = &marvell_nand_controller_ops; |
02f26ecf MR |
2811 | INIT_LIST_HEAD(&nfc->chips); |
2812 | ||
2813 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
2814 | nfc->regs = devm_ioremap_resource(dev, r); | |
2815 | if (IS_ERR(nfc->regs)) | |
2816 | return PTR_ERR(nfc->regs); | |
2817 | ||
2818 | irq = platform_get_irq(pdev, 0); | |
2819 | if (irq < 0) { | |
2820 | dev_err(dev, "failed to retrieve irq\n"); | |
2821 | return irq; | |
2822 | } | |
2823 | ||
6b6de654 | 2824 | nfc->core_clk = devm_clk_get(&pdev->dev, "core"); |
961ba15c GC |
2825 | |
2826 | /* Managed the legacy case (when the first clock was not named) */ | |
6b6de654 BB |
2827 | if (nfc->core_clk == ERR_PTR(-ENOENT)) |
2828 | nfc->core_clk = devm_clk_get(&pdev->dev, NULL); | |
961ba15c | 2829 | |
6b6de654 BB |
2830 | if (IS_ERR(nfc->core_clk)) |
2831 | return PTR_ERR(nfc->core_clk); | |
02f26ecf | 2832 | |
6b6de654 | 2833 | ret = clk_prepare_enable(nfc->core_clk); |
02f26ecf MR |
2834 | if (ret) |
2835 | return ret; | |
2836 | ||
961ba15c | 2837 | nfc->reg_clk = devm_clk_get(&pdev->dev, "reg"); |
f9e64d61 DM |
2838 | if (IS_ERR(nfc->reg_clk)) { |
2839 | if (PTR_ERR(nfc->reg_clk) != -ENOENT) { | |
961ba15c | 2840 | ret = PTR_ERR(nfc->reg_clk); |
6b6de654 | 2841 | goto unprepare_core_clk; |
961ba15c | 2842 | } |
f9e64d61 DM |
2843 | |
2844 | nfc->reg_clk = NULL; | |
961ba15c GC |
2845 | } |
2846 | ||
f9e64d61 DM |
2847 | ret = clk_prepare_enable(nfc->reg_clk); |
2848 | if (ret) | |
2849 | goto unprepare_core_clk; | |
2850 | ||
02f26ecf MR |
2851 | marvell_nfc_disable_int(nfc, NDCR_ALL_INT); |
2852 | marvell_nfc_clear_int(nfc, NDCR_ALL_INT); | |
2853 | ret = devm_request_irq(dev, irq, marvell_nfc_isr, | |
2854 | 0, "marvell-nfc", nfc); | |
2855 | if (ret) | |
961ba15c | 2856 | goto unprepare_reg_clk; |
02f26ecf MR |
2857 | |
2858 | /* Get NAND controller capabilities */ | |
2859 | if (pdev->id_entry) | |
2860 | nfc->caps = (void *)pdev->id_entry->driver_data; | |
2861 | else | |
2862 | nfc->caps = of_device_get_match_data(&pdev->dev); | |
2863 | ||
2864 | if (!nfc->caps) { | |
2865 | dev_err(dev, "Could not retrieve NFC caps\n"); | |
2866 | ret = -EINVAL; | |
961ba15c | 2867 | goto unprepare_reg_clk; |
02f26ecf MR |
2868 | } |
2869 | ||
2870 | /* Init the controller and then probe the chips */ | |
2871 | ret = marvell_nfc_init(nfc); | |
2872 | if (ret) | |
961ba15c | 2873 | goto unprepare_reg_clk; |
02f26ecf MR |
2874 | |
2875 | platform_set_drvdata(pdev, nfc); | |
2876 | ||
2877 | ret = marvell_nand_chips_init(dev, nfc); | |
2878 | if (ret) | |
961ba15c | 2879 | goto unprepare_reg_clk; |
02f26ecf MR |
2880 | |
2881 | return 0; | |
2882 | ||
961ba15c GC |
2883 | unprepare_reg_clk: |
2884 | clk_disable_unprepare(nfc->reg_clk); | |
6b6de654 BB |
2885 | unprepare_core_clk: |
2886 | clk_disable_unprepare(nfc->core_clk); | |
02f26ecf MR |
2887 | |
2888 | return ret; | |
2889 | } | |
2890 | ||
2891 | static int marvell_nfc_remove(struct platform_device *pdev) | |
2892 | { | |
2893 | struct marvell_nfc *nfc = platform_get_drvdata(pdev); | |
2894 | ||
2895 | marvell_nand_chips_cleanup(nfc); | |
2896 | ||
2897 | if (nfc->use_dma) { | |
2898 | dmaengine_terminate_all(nfc->dma_chan); | |
2899 | dma_release_channel(nfc->dma_chan); | |
2900 | } | |
2901 | ||
961ba15c | 2902 | clk_disable_unprepare(nfc->reg_clk); |
6b6de654 | 2903 | clk_disable_unprepare(nfc->core_clk); |
02f26ecf MR |
2904 | |
2905 | return 0; | |
2906 | } | |
2907 | ||
bd9c3f9b DM |
2908 | static int __maybe_unused marvell_nfc_suspend(struct device *dev) |
2909 | { | |
2910 | struct marvell_nfc *nfc = dev_get_drvdata(dev); | |
2911 | struct marvell_nand_chip *chip; | |
2912 | ||
2913 | list_for_each_entry(chip, &nfc->chips, node) | |
2914 | marvell_nfc_wait_ndrun(&chip->chip); | |
2915 | ||
2916 | clk_disable_unprepare(nfc->reg_clk); | |
2917 | clk_disable_unprepare(nfc->core_clk); | |
2918 | ||
2919 | return 0; | |
2920 | } | |
2921 | ||
2922 | static int __maybe_unused marvell_nfc_resume(struct device *dev) | |
2923 | { | |
2924 | struct marvell_nfc *nfc = dev_get_drvdata(dev); | |
2925 | int ret; | |
2926 | ||
2927 | ret = clk_prepare_enable(nfc->core_clk); | |
2928 | if (ret < 0) | |
2929 | return ret; | |
2930 | ||
f9e64d61 DM |
2931 | ret = clk_prepare_enable(nfc->reg_clk); |
2932 | if (ret < 0) | |
2933 | return ret; | |
bd9c3f9b DM |
2934 | |
2935 | /* | |
2936 | * Reset nfc->selected_chip so the next command will cause the timing | |
2937 | * registers to be restored in marvell_nfc_select_chip(). | |
2938 | */ | |
2939 | nfc->selected_chip = NULL; | |
2940 | ||
2941 | /* Reset registers that have lost their contents */ | |
2942 | marvell_nfc_reset(nfc); | |
2943 | ||
2944 | return 0; | |
2945 | } | |
2946 | ||
2947 | static const struct dev_pm_ops marvell_nfc_pm_ops = { | |
2948 | SET_SYSTEM_SLEEP_PM_OPS(marvell_nfc_suspend, marvell_nfc_resume) | |
2949 | }; | |
2950 | ||
02f26ecf MR |
2951 | static const struct marvell_nfc_caps marvell_armada_8k_nfc_caps = { |
2952 | .max_cs_nb = 4, | |
2953 | .max_rb_nb = 2, | |
2954 | .need_system_controller = true, | |
2955 | .is_nfcv2 = true, | |
2956 | }; | |
2957 | ||
2958 | static const struct marvell_nfc_caps marvell_armada370_nfc_caps = { | |
2959 | .max_cs_nb = 4, | |
2960 | .max_rb_nb = 2, | |
2961 | .is_nfcv2 = true, | |
2962 | }; | |
2963 | ||
2964 | static const struct marvell_nfc_caps marvell_pxa3xx_nfc_caps = { | |
2965 | .max_cs_nb = 2, | |
2966 | .max_rb_nb = 1, | |
2967 | .use_dma = true, | |
2968 | }; | |
2969 | ||
2970 | static const struct marvell_nfc_caps marvell_armada_8k_nfc_legacy_caps = { | |
2971 | .max_cs_nb = 4, | |
2972 | .max_rb_nb = 2, | |
2973 | .need_system_controller = true, | |
2974 | .legacy_of_bindings = true, | |
2975 | .is_nfcv2 = true, | |
2976 | }; | |
2977 | ||
2978 | static const struct marvell_nfc_caps marvell_armada370_nfc_legacy_caps = { | |
2979 | .max_cs_nb = 4, | |
2980 | .max_rb_nb = 2, | |
2981 | .legacy_of_bindings = true, | |
2982 | .is_nfcv2 = true, | |
2983 | }; | |
2984 | ||
2985 | static const struct marvell_nfc_caps marvell_pxa3xx_nfc_legacy_caps = { | |
2986 | .max_cs_nb = 2, | |
2987 | .max_rb_nb = 1, | |
2988 | .legacy_of_bindings = true, | |
2989 | .use_dma = true, | |
2990 | }; | |
2991 | ||
2992 | static const struct platform_device_id marvell_nfc_platform_ids[] = { | |
2993 | { | |
2994 | .name = "pxa3xx-nand", | |
2995 | .driver_data = (kernel_ulong_t)&marvell_pxa3xx_nfc_legacy_caps, | |
2996 | }, | |
2997 | { /* sentinel */ }, | |
2998 | }; | |
2999 | MODULE_DEVICE_TABLE(platform, marvell_nfc_platform_ids); | |
3000 | ||
3001 | static const struct of_device_id marvell_nfc_of_ids[] = { | |
3002 | { | |
3003 | .compatible = "marvell,armada-8k-nand-controller", | |
3004 | .data = &marvell_armada_8k_nfc_caps, | |
3005 | }, | |
3006 | { | |
3007 | .compatible = "marvell,armada370-nand-controller", | |
3008 | .data = &marvell_armada370_nfc_caps, | |
3009 | }, | |
3010 | { | |
3011 | .compatible = "marvell,pxa3xx-nand-controller", | |
3012 | .data = &marvell_pxa3xx_nfc_caps, | |
3013 | }, | |
3014 | /* Support for old/deprecated bindings: */ | |
3015 | { | |
3016 | .compatible = "marvell,armada-8k-nand", | |
3017 | .data = &marvell_armada_8k_nfc_legacy_caps, | |
3018 | }, | |
3019 | { | |
3020 | .compatible = "marvell,armada370-nand", | |
3021 | .data = &marvell_armada370_nfc_legacy_caps, | |
3022 | }, | |
3023 | { | |
3024 | .compatible = "marvell,pxa3xx-nand", | |
3025 | .data = &marvell_pxa3xx_nfc_legacy_caps, | |
3026 | }, | |
3027 | { /* sentinel */ }, | |
3028 | }; | |
3029 | MODULE_DEVICE_TABLE(of, marvell_nfc_of_ids); | |
3030 | ||
3031 | static struct platform_driver marvell_nfc_driver = { | |
3032 | .driver = { | |
3033 | .name = "marvell-nfc", | |
3034 | .of_match_table = marvell_nfc_of_ids, | |
bd9c3f9b | 3035 | .pm = &marvell_nfc_pm_ops, |
02f26ecf MR |
3036 | }, |
3037 | .id_table = marvell_nfc_platform_ids, | |
3038 | .probe = marvell_nfc_probe, | |
3039 | .remove = marvell_nfc_remove, | |
3040 | }; | |
3041 | module_platform_driver(marvell_nfc_driver); | |
3042 | ||
3043 | MODULE_LICENSE("GPL"); | |
3044 | MODULE_DESCRIPTION("Marvell NAND controller driver"); |