Commit | Line | Data |
---|---|---|
10a2bcae HS |
1 | /* |
2 | * Freescale GPMI NAND Flash Driver | |
3 | * | |
026918e7 | 4 | * Copyright (C) 2010-2015 Freescale Semiconductor, Inc. |
10a2bcae HS |
5 | * Copyright (C) 2008 Embedded Alley Solutions, Inc. |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License along | |
18 | * with this program; if not, write to the Free Software Foundation, Inc., | |
19 | * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | |
20 | */ | |
21 | #include <linux/clk.h> | |
22 | #include <linux/slab.h> | |
68db0cf1 | 23 | #include <linux/sched/task_stack.h> |
10a2bcae | 24 | #include <linux/interrupt.h> |
df16c86a | 25 | #include <linux/module.h> |
10a2bcae | 26 | #include <linux/mtd/partitions.h> |
e10db1f0 HS |
27 | #include <linux/of.h> |
28 | #include <linux/of_device.h> | |
10a2bcae | 29 | #include "gpmi-nand.h" |
b8e2931d | 30 | #include "bch-regs.h" |
10a2bcae | 31 | |
5de0b52e HS |
32 | /* Resource names for the GPMI NAND driver. */ |
33 | #define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand" | |
34 | #define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch" | |
35 | #define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch" | |
5de0b52e | 36 | |
10a2bcae HS |
37 | /* add our owner bbt descriptor */ |
38 | static uint8_t scan_ff_pattern[] = { 0xff }; | |
39 | static struct nand_bbt_descr gpmi_bbt_descr = { | |
40 | .options = 0, | |
41 | .offs = 0, | |
42 | .len = 1, | |
43 | .pattern = scan_ff_pattern | |
44 | }; | |
45 | ||
7a2b89ac HS |
46 | /* |
47 | * We may change the layout if we can get the ECC info from the datasheet, | |
48 | * else we will use all the (page + OOB). | |
49 | */ | |
3f158e47 BB |
50 | static int gpmi_ooblayout_ecc(struct mtd_info *mtd, int section, |
51 | struct mtd_oob_region *oobregion) | |
52 | { | |
53 | struct nand_chip *chip = mtd_to_nand(mtd); | |
54 | struct gpmi_nand_data *this = nand_get_controller_data(chip); | |
55 | struct bch_geometry *geo = &this->bch_geometry; | |
56 | ||
57 | if (section) | |
58 | return -ERANGE; | |
59 | ||
60 | oobregion->offset = 0; | |
61 | oobregion->length = geo->page_size - mtd->writesize; | |
62 | ||
63 | return 0; | |
64 | } | |
65 | ||
66 | static int gpmi_ooblayout_free(struct mtd_info *mtd, int section, | |
67 | struct mtd_oob_region *oobregion) | |
68 | { | |
69 | struct nand_chip *chip = mtd_to_nand(mtd); | |
70 | struct gpmi_nand_data *this = nand_get_controller_data(chip); | |
71 | struct bch_geometry *geo = &this->bch_geometry; | |
72 | ||
73 | if (section) | |
74 | return -ERANGE; | |
75 | ||
76 | /* The available oob size we have. */ | |
77 | if (geo->page_size < mtd->writesize + mtd->oobsize) { | |
78 | oobregion->offset = geo->page_size - mtd->writesize; | |
79 | oobregion->length = mtd->oobsize - oobregion->offset; | |
80 | } | |
81 | ||
82 | return 0; | |
83 | } | |
84 | ||
6b7ee721 SA |
85 | static const char * const gpmi_clks_for_mx2x[] = { |
86 | "gpmi_io", | |
87 | }; | |
88 | ||
3f158e47 BB |
89 | static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = { |
90 | .ecc = gpmi_ooblayout_ecc, | |
91 | .free = gpmi_ooblayout_free, | |
10a2bcae HS |
92 | }; |
93 | ||
6189cccb HS |
94 | static const struct gpmi_devdata gpmi_devdata_imx23 = { |
95 | .type = IS_MX23, | |
96 | .bch_max_ecc_strength = 20, | |
97 | .max_chain_delay = 16, | |
6b7ee721 SA |
98 | .clks = gpmi_clks_for_mx2x, |
99 | .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x), | |
6189cccb HS |
100 | }; |
101 | ||
102 | static const struct gpmi_devdata gpmi_devdata_imx28 = { | |
103 | .type = IS_MX28, | |
104 | .bch_max_ecc_strength = 20, | |
105 | .max_chain_delay = 16, | |
6b7ee721 SA |
106 | .clks = gpmi_clks_for_mx2x, |
107 | .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x), | |
108 | }; | |
109 | ||
110 | static const char * const gpmi_clks_for_mx6[] = { | |
111 | "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch", | |
6189cccb HS |
112 | }; |
113 | ||
114 | static const struct gpmi_devdata gpmi_devdata_imx6q = { | |
115 | .type = IS_MX6Q, | |
116 | .bch_max_ecc_strength = 40, | |
117 | .max_chain_delay = 12, | |
6b7ee721 SA |
118 | .clks = gpmi_clks_for_mx6, |
119 | .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6), | |
6189cccb HS |
120 | }; |
121 | ||
91f5498e HS |
122 | static const struct gpmi_devdata gpmi_devdata_imx6sx = { |
123 | .type = IS_MX6SX, | |
124 | .bch_max_ecc_strength = 62, | |
125 | .max_chain_delay = 12, | |
6b7ee721 SA |
126 | .clks = gpmi_clks_for_mx6, |
127 | .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6), | |
91f5498e HS |
128 | }; |
129 | ||
b4af694f SA |
130 | static const char * const gpmi_clks_for_mx7d[] = { |
131 | "gpmi_io", "gpmi_bch_apb", | |
132 | }; | |
133 | ||
134 | static const struct gpmi_devdata gpmi_devdata_imx7d = { | |
135 | .type = IS_MX7D, | |
136 | .bch_max_ecc_strength = 62, | |
137 | .max_chain_delay = 12, | |
138 | .clks = gpmi_clks_for_mx7d, | |
139 | .clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d), | |
140 | }; | |
141 | ||
10a2bcae HS |
142 | static irqreturn_t bch_irq(int irq, void *cookie) |
143 | { | |
144 | struct gpmi_nand_data *this = cookie; | |
145 | ||
146 | gpmi_clear_bch(this); | |
147 | complete(&this->bch_done); | |
148 | return IRQ_HANDLED; | |
149 | } | |
150 | ||
151 | /* | |
152 | * Calculate the ECC strength by hand: | |
153 | * E : The ECC strength. | |
154 | * G : the length of Galois Field. | |
155 | * N : The chunk count of per page. | |
156 | * O : the oobsize of the NAND chip. | |
157 | * M : the metasize of per page. | |
158 | * | |
159 | * The formula is : | |
160 | * E * G * N | |
161 | * ------------ <= (O - M) | |
162 | * 8 | |
163 | * | |
164 | * So, we get E by: | |
165 | * (O - M) * 8 | |
166 | * E <= ------------- | |
167 | * G * N | |
168 | */ | |
169 | static inline int get_ecc_strength(struct gpmi_nand_data *this) | |
170 | { | |
171 | struct bch_geometry *geo = &this->bch_geometry; | |
2a690b25 | 172 | struct mtd_info *mtd = nand_to_mtd(&this->nand); |
10a2bcae HS |
173 | int ecc_strength; |
174 | ||
175 | ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8) | |
176 | / (geo->gf_len * geo->ecc_chunk_count); | |
177 | ||
178 | /* We need the minor even number. */ | |
179 | return round_down(ecc_strength, 2); | |
180 | } | |
181 | ||
92d0e09a HS |
182 | static inline bool gpmi_check_ecc(struct gpmi_nand_data *this) |
183 | { | |
184 | struct bch_geometry *geo = &this->bch_geometry; | |
185 | ||
186 | /* Do the sanity check. */ | |
187 | if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this)) { | |
188 | /* The mx23/mx28 only support the GF13. */ | |
189 | if (geo->gf_len == 14) | |
190 | return false; | |
92d0e09a | 191 | } |
6189cccb | 192 | return geo->ecc_strength <= this->devdata->bch_max_ecc_strength; |
92d0e09a HS |
193 | } |
194 | ||
2febcdf8 HS |
195 | /* |
196 | * If we can get the ECC information from the nand chip, we do not | |
197 | * need to calculate them ourselves. | |
198 | * | |
199 | * We may have available oob space in this case. | |
200 | */ | |
b8b0e465 | 201 | static int set_geometry_by_ecc_info(struct gpmi_nand_data *this) |
2febcdf8 HS |
202 | { |
203 | struct bch_geometry *geo = &this->bch_geometry; | |
2a690b25 BB |
204 | struct nand_chip *chip = &this->nand; |
205 | struct mtd_info *mtd = nand_to_mtd(chip); | |
2febcdf8 HS |
206 | unsigned int block_mark_bit_offset; |
207 | ||
208 | if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) | |
b8b0e465 | 209 | return -EINVAL; |
2febcdf8 HS |
210 | |
211 | switch (chip->ecc_step_ds) { | |
212 | case SZ_512: | |
213 | geo->gf_len = 13; | |
214 | break; | |
215 | case SZ_1K: | |
216 | geo->gf_len = 14; | |
217 | break; | |
218 | default: | |
219 | dev_err(this->dev, | |
220 | "unsupported nand chip. ecc bits : %d, ecc size : %d\n", | |
221 | chip->ecc_strength_ds, chip->ecc_step_ds); | |
b8b0e465 | 222 | return -EINVAL; |
2febcdf8 HS |
223 | } |
224 | geo->ecc_chunk_size = chip->ecc_step_ds; | |
225 | geo->ecc_strength = round_up(chip->ecc_strength_ds, 2); | |
226 | if (!gpmi_check_ecc(this)) | |
b8b0e465 | 227 | return -EINVAL; |
2febcdf8 HS |
228 | |
229 | /* Keep the C >= O */ | |
230 | if (geo->ecc_chunk_size < mtd->oobsize) { | |
231 | dev_err(this->dev, | |
232 | "unsupported nand chip. ecc size: %d, oob size : %d\n", | |
233 | chip->ecc_step_ds, mtd->oobsize); | |
b8b0e465 | 234 | return -EINVAL; |
2febcdf8 HS |
235 | } |
236 | ||
237 | /* The default value, see comment in the legacy_set_geometry(). */ | |
238 | geo->metadata_size = 10; | |
239 | ||
240 | geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size; | |
241 | ||
242 | /* | |
243 | * Now, the NAND chip with 2K page(data chunk is 512byte) shows below: | |
244 | * | |
245 | * | P | | |
246 | * |<----------------------------------------------------->| | |
247 | * | | | |
248 | * | (Block Mark) | | |
249 | * | P' | | | | | |
250 | * |<-------------------------------------------->| D | | O' | | |
251 | * | |<---->| |<--->| | |
252 | * V V V V V | |
253 | * +---+----------+-+----------+-+----------+-+----------+-+-----+ | |
254 | * | M | data |E| data |E| data |E| data |E| | | |
255 | * +---+----------+-+----------+-+----------+-+----------+-+-----+ | |
256 | * ^ ^ | |
257 | * | O | | |
258 | * |<------------>| | |
259 | * | | | |
260 | * | |
261 | * P : the page size for BCH module. | |
262 | * E : The ECC strength. | |
263 | * G : the length of Galois Field. | |
264 | * N : The chunk count of per page. | |
265 | * M : the metasize of per page. | |
266 | * C : the ecc chunk size, aka the "data" above. | |
267 | * P': the nand chip's page size. | |
268 | * O : the nand chip's oob size. | |
269 | * O': the free oob. | |
270 | * | |
271 | * The formula for P is : | |
272 | * | |
273 | * E * G * N | |
274 | * P = ------------ + P' + M | |
275 | * 8 | |
276 | * | |
277 | * The position of block mark moves forward in the ECC-based view | |
278 | * of page, and the delta is: | |
279 | * | |
280 | * E * G * (N - 1) | |
281 | * D = (---------------- + M) | |
282 | * 8 | |
283 | * | |
284 | * Please see the comment in legacy_set_geometry(). | |
285 | * With the condition C >= O , we still can get same result. | |
286 | * So the bit position of the physical block mark within the ECC-based | |
287 | * view of the page is : | |
288 | * (P' - D) * 8 | |
289 | */ | |
290 | geo->page_size = mtd->writesize + geo->metadata_size + | |
291 | (geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8; | |
292 | ||
2febcdf8 HS |
293 | geo->payload_size = mtd->writesize; |
294 | ||
295 | geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4); | |
296 | geo->auxiliary_size = ALIGN(geo->metadata_size, 4) | |
297 | + ALIGN(geo->ecc_chunk_count, 4); | |
298 | ||
299 | if (!this->swap_block_mark) | |
b8b0e465 | 300 | return 0; |
2febcdf8 HS |
301 | |
302 | /* For bit swap. */ | |
303 | block_mark_bit_offset = mtd->writesize * 8 - | |
304 | (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1) | |
305 | + geo->metadata_size * 8); | |
306 | ||
307 | geo->block_mark_byte_offset = block_mark_bit_offset / 8; | |
308 | geo->block_mark_bit_offset = block_mark_bit_offset % 8; | |
b8b0e465 | 309 | return 0; |
2febcdf8 HS |
310 | } |
311 | ||
312 | static int legacy_set_geometry(struct gpmi_nand_data *this) | |
10a2bcae HS |
313 | { |
314 | struct bch_geometry *geo = &this->bch_geometry; | |
2a690b25 | 315 | struct mtd_info *mtd = nand_to_mtd(&this->nand); |
10a2bcae HS |
316 | unsigned int metadata_size; |
317 | unsigned int status_size; | |
318 | unsigned int block_mark_bit_offset; | |
319 | ||
320 | /* | |
321 | * The size of the metadata can be changed, though we set it to 10 | |
322 | * bytes now. But it can't be too large, because we have to save | |
323 | * enough space for BCH. | |
324 | */ | |
325 | geo->metadata_size = 10; | |
326 | ||
327 | /* The default for the length of Galois Field. */ | |
328 | geo->gf_len = 13; | |
329 | ||
9ff16f08 | 330 | /* The default for chunk size. */ |
10a2bcae | 331 | geo->ecc_chunk_size = 512; |
9ff16f08 | 332 | while (geo->ecc_chunk_size < mtd->oobsize) { |
10a2bcae | 333 | geo->ecc_chunk_size *= 2; /* keep C >= O */ |
9ff16f08 HS |
334 | geo->gf_len = 14; |
335 | } | |
10a2bcae HS |
336 | |
337 | geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size; | |
338 | ||
339 | /* We use the same ECC strength for all chunks. */ | |
340 | geo->ecc_strength = get_ecc_strength(this); | |
92d0e09a HS |
341 | if (!gpmi_check_ecc(this)) { |
342 | dev_err(this->dev, | |
b8b0e465 HX |
343 | "ecc strength: %d cannot be supported by the controller (%d)\n" |
344 | "try to use minimum ecc strength that NAND chip required\n", | |
d8c0372b | 345 | geo->ecc_strength, |
6189cccb | 346 | this->devdata->bch_max_ecc_strength); |
10a2bcae HS |
347 | return -EINVAL; |
348 | } | |
349 | ||
1848a057 HX |
350 | geo->page_size = mtd->writesize + geo->metadata_size + |
351 | (geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8; | |
10a2bcae HS |
352 | geo->payload_size = mtd->writesize; |
353 | ||
354 | /* | |
355 | * The auxiliary buffer contains the metadata and the ECC status. The | |
356 | * metadata is padded to the nearest 32-bit boundary. The ECC status | |
357 | * contains one byte for every ECC chunk, and is also padded to the | |
358 | * nearest 32-bit boundary. | |
359 | */ | |
360 | metadata_size = ALIGN(geo->metadata_size, 4); | |
361 | status_size = ALIGN(geo->ecc_chunk_count, 4); | |
362 | ||
363 | geo->auxiliary_size = metadata_size + status_size; | |
364 | geo->auxiliary_status_offset = metadata_size; | |
365 | ||
366 | if (!this->swap_block_mark) | |
367 | return 0; | |
368 | ||
369 | /* | |
370 | * We need to compute the byte and bit offsets of | |
371 | * the physical block mark within the ECC-based view of the page. | |
372 | * | |
373 | * NAND chip with 2K page shows below: | |
374 | * (Block Mark) | |
375 | * | | | |
376 | * | D | | |
377 | * |<---->| | |
378 | * V V | |
379 | * +---+----------+-+----------+-+----------+-+----------+-+ | |
380 | * | M | data |E| data |E| data |E| data |E| | |
381 | * +---+----------+-+----------+-+----------+-+----------+-+ | |
382 | * | |
383 | * The position of block mark moves forward in the ECC-based view | |
384 | * of page, and the delta is: | |
385 | * | |
386 | * E * G * (N - 1) | |
387 | * D = (---------------- + M) | |
388 | * 8 | |
389 | * | |
390 | * With the formula to compute the ECC strength, and the condition | |
391 | * : C >= O (C is the ecc chunk size) | |
392 | * | |
393 | * It's easy to deduce to the following result: | |
394 | * | |
395 | * E * G (O - M) C - M C - M | |
396 | * ----------- <= ------- <= -------- < --------- | |
397 | * 8 N N (N - 1) | |
398 | * | |
399 | * So, we get: | |
400 | * | |
401 | * E * G * (N - 1) | |
402 | * D = (---------------- + M) < C | |
403 | * 8 | |
404 | * | |
405 | * The above inequality means the position of block mark | |
406 | * within the ECC-based view of the page is still in the data chunk, | |
407 | * and it's NOT in the ECC bits of the chunk. | |
408 | * | |
409 | * Use the following to compute the bit position of the | |
410 | * physical block mark within the ECC-based view of the page: | |
411 | * (page_size - D) * 8 | |
412 | * | |
413 | * --Huang Shijie | |
414 | */ | |
415 | block_mark_bit_offset = mtd->writesize * 8 - | |
416 | (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1) | |
417 | + geo->metadata_size * 8); | |
418 | ||
419 | geo->block_mark_byte_offset = block_mark_bit_offset / 8; | |
420 | geo->block_mark_bit_offset = block_mark_bit_offset % 8; | |
421 | return 0; | |
422 | } | |
423 | ||
2febcdf8 HS |
424 | int common_nfc_set_geometry(struct gpmi_nand_data *this) |
425 | { | |
b8b0e465 HX |
426 | if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc")) |
427 | || legacy_set_geometry(this)) | |
428 | return set_geometry_by_ecc_info(this); | |
429 | ||
430 | return 0; | |
2febcdf8 HS |
431 | } |
432 | ||
10a2bcae HS |
433 | struct dma_chan *get_dma_chan(struct gpmi_nand_data *this) |
434 | { | |
a7c12d01 HS |
435 | /* We use the DMA channel 0 to access all the nand chips. */ |
436 | return this->dma_chans[0]; | |
10a2bcae HS |
437 | } |
438 | ||
439 | /* Can we use the upper's buffer directly for DMA? */ | |
440 | void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr) | |
441 | { | |
442 | struct scatterlist *sgl = &this->data_sgl; | |
443 | int ret; | |
444 | ||
10a2bcae | 445 | /* first try to map the upper buffer directly */ |
0ff76a92 HS |
446 | if (virt_addr_valid(this->upper_buf) && |
447 | !object_is_on_stack(this->upper_buf)) { | |
448 | sg_init_one(sgl, this->upper_buf, this->upper_len); | |
10a2bcae HS |
449 | ret = dma_map_sg(this->dev, sgl, 1, dr); |
450 | if (ret == 0) | |
0ff76a92 | 451 | goto map_fail; |
10a2bcae | 452 | |
0ff76a92 HS |
453 | this->direct_dma_map_ok = true; |
454 | return; | |
10a2bcae | 455 | } |
0ff76a92 HS |
456 | |
457 | map_fail: | |
458 | /* We have to use our own DMA buffer. */ | |
459 | sg_init_one(sgl, this->data_buffer_dma, this->upper_len); | |
460 | ||
461 | if (dr == DMA_TO_DEVICE) | |
462 | memcpy(this->data_buffer_dma, this->upper_buf, this->upper_len); | |
463 | ||
464 | dma_map_sg(this->dev, sgl, 1, dr); | |
465 | ||
466 | this->direct_dma_map_ok = false; | |
10a2bcae HS |
467 | } |
468 | ||
469 | /* This will be called after the DMA operation is finished. */ | |
470 | static void dma_irq_callback(void *param) | |
471 | { | |
472 | struct gpmi_nand_data *this = param; | |
473 | struct completion *dma_c = &this->dma_done; | |
474 | ||
10a2bcae HS |
475 | switch (this->dma_type) { |
476 | case DMA_FOR_COMMAND: | |
477 | dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE); | |
478 | break; | |
479 | ||
480 | case DMA_FOR_READ_DATA: | |
481 | dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE); | |
482 | if (this->direct_dma_map_ok == false) | |
483 | memcpy(this->upper_buf, this->data_buffer_dma, | |
484 | this->upper_len); | |
485 | break; | |
486 | ||
487 | case DMA_FOR_WRITE_DATA: | |
488 | dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE); | |
489 | break; | |
490 | ||
491 | case DMA_FOR_READ_ECC_PAGE: | |
492 | case DMA_FOR_WRITE_ECC_PAGE: | |
493 | /* We have to wait the BCH interrupt to finish. */ | |
494 | break; | |
495 | ||
496 | default: | |
da40c16a | 497 | dev_err(this->dev, "in wrong DMA operation.\n"); |
10a2bcae | 498 | } |
7b3d2fb9 HS |
499 | |
500 | complete(dma_c); | |
10a2bcae HS |
501 | } |
502 | ||
503 | int start_dma_without_bch_irq(struct gpmi_nand_data *this, | |
504 | struct dma_async_tx_descriptor *desc) | |
505 | { | |
506 | struct completion *dma_c = &this->dma_done; | |
706d5b28 | 507 | unsigned long timeout; |
10a2bcae HS |
508 | |
509 | init_completion(dma_c); | |
510 | ||
511 | desc->callback = dma_irq_callback; | |
512 | desc->callback_param = this; | |
513 | dmaengine_submit(desc); | |
d04525ed | 514 | dma_async_issue_pending(get_dma_chan(this)); |
10a2bcae HS |
515 | |
516 | /* Wait for the interrupt from the DMA block. */ | |
706d5b28 NMG |
517 | timeout = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000)); |
518 | if (!timeout) { | |
da40c16a HS |
519 | dev_err(this->dev, "DMA timeout, last DMA :%d\n", |
520 | this->last_dma_type); | |
10a2bcae HS |
521 | gpmi_dump_info(this); |
522 | return -ETIMEDOUT; | |
523 | } | |
524 | return 0; | |
525 | } | |
526 | ||
527 | /* | |
528 | * This function is used in BCH reading or BCH writing pages. | |
529 | * It will wait for the BCH interrupt as long as ONE second. | |
530 | * Actually, we must wait for two interrupts : | |
531 | * [1] firstly the DMA interrupt and | |
532 | * [2] secondly the BCH interrupt. | |
533 | */ | |
534 | int start_dma_with_bch_irq(struct gpmi_nand_data *this, | |
535 | struct dma_async_tx_descriptor *desc) | |
536 | { | |
537 | struct completion *bch_c = &this->bch_done; | |
706d5b28 | 538 | unsigned long timeout; |
10a2bcae HS |
539 | |
540 | /* Prepare to receive an interrupt from the BCH block. */ | |
541 | init_completion(bch_c); | |
542 | ||
543 | /* start the DMA */ | |
544 | start_dma_without_bch_irq(this, desc); | |
545 | ||
546 | /* Wait for the interrupt from the BCH block. */ | |
706d5b28 NMG |
547 | timeout = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000)); |
548 | if (!timeout) { | |
da40c16a HS |
549 | dev_err(this->dev, "BCH timeout, last DMA :%d\n", |
550 | this->last_dma_type); | |
10a2bcae HS |
551 | gpmi_dump_info(this); |
552 | return -ETIMEDOUT; | |
553 | } | |
554 | return 0; | |
555 | } | |
556 | ||
d8929942 GKH |
557 | static int acquire_register_block(struct gpmi_nand_data *this, |
558 | const char *res_name) | |
10a2bcae HS |
559 | { |
560 | struct platform_device *pdev = this->pdev; | |
561 | struct resources *res = &this->resources; | |
562 | struct resource *r; | |
513d57e1 | 563 | void __iomem *p; |
10a2bcae HS |
564 | |
565 | r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); | |
87a9d698 HS |
566 | p = devm_ioremap_resource(&pdev->dev, r); |
567 | if (IS_ERR(p)) | |
568 | return PTR_ERR(p); | |
10a2bcae HS |
569 | |
570 | if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME)) | |
571 | res->gpmi_regs = p; | |
572 | else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME)) | |
573 | res->bch_regs = p; | |
574 | else | |
da40c16a | 575 | dev_err(this->dev, "unknown resource name : %s\n", res_name); |
10a2bcae HS |
576 | |
577 | return 0; | |
578 | } | |
579 | ||
d8929942 | 580 | static int acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h) |
10a2bcae HS |
581 | { |
582 | struct platform_device *pdev = this->pdev; | |
10a2bcae HS |
583 | const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME; |
584 | struct resource *r; | |
585 | int err; | |
586 | ||
587 | r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name); | |
588 | if (!r) { | |
da40c16a | 589 | dev_err(this->dev, "Can't get resource for %s\n", res_name); |
52a073bd | 590 | return -ENODEV; |
10a2bcae HS |
591 | } |
592 | ||
3cb2c1ed HS |
593 | err = devm_request_irq(this->dev, r->start, irq_h, 0, res_name, this); |
594 | if (err) | |
595 | dev_err(this->dev, "error requesting BCH IRQ\n"); | |
10a2bcae | 596 | |
3cb2c1ed | 597 | return err; |
10a2bcae HS |
598 | } |
599 | ||
10a2bcae HS |
600 | static void release_dma_channels(struct gpmi_nand_data *this) |
601 | { | |
602 | unsigned int i; | |
603 | for (i = 0; i < DMA_CHANS; i++) | |
604 | if (this->dma_chans[i]) { | |
605 | dma_release_channel(this->dma_chans[i]); | |
606 | this->dma_chans[i] = NULL; | |
607 | } | |
608 | } | |
609 | ||
06f25510 | 610 | static int acquire_dma_channels(struct gpmi_nand_data *this) |
10a2bcae HS |
611 | { |
612 | struct platform_device *pdev = this->pdev; | |
e10db1f0 | 613 | struct dma_chan *dma_chan; |
10a2bcae | 614 | |
e10db1f0 | 615 | /* request dma channel */ |
5fac0e18 | 616 | dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx"); |
e10db1f0 | 617 | if (!dma_chan) { |
da40c16a | 618 | dev_err(this->dev, "Failed to request DMA channel.\n"); |
e10db1f0 | 619 | goto acquire_err; |
10a2bcae HS |
620 | } |
621 | ||
e10db1f0 | 622 | this->dma_chans[0] = dma_chan; |
10a2bcae HS |
623 | return 0; |
624 | ||
625 | acquire_err: | |
10a2bcae HS |
626 | release_dma_channels(this); |
627 | return -EINVAL; | |
628 | } | |
629 | ||
06f25510 | 630 | static int gpmi_get_clks(struct gpmi_nand_data *this) |
ff506172 HS |
631 | { |
632 | struct resources *r = &this->resources; | |
ff506172 | 633 | struct clk *clk; |
d1cb556c | 634 | int err, i; |
ff506172 | 635 | |
6b7ee721 SA |
636 | for (i = 0; i < this->devdata->clks_count; i++) { |
637 | clk = devm_clk_get(this->dev, this->devdata->clks[i]); | |
d1cb556c MM |
638 | if (IS_ERR(clk)) { |
639 | err = PTR_ERR(clk); | |
ff506172 | 640 | goto err_clock; |
d1cb556c | 641 | } |
ff506172 HS |
642 | |
643 | r->clock[i] = clk; | |
644 | } | |
645 | ||
91f5498e | 646 | if (GPMI_IS_MX6(this)) |
ff506172 | 647 | /* |
91f5498e | 648 | * Set the default value for the gpmi clock. |
ff506172 | 649 | * |
e1ca95e3 HS |
650 | * If you want to use the ONFI nand which is in the |
651 | * Synchronous Mode, you should change the clock as you need. | |
ff506172 HS |
652 | */ |
653 | clk_set_rate(r->clock[0], 22000000); | |
e1ca95e3 | 654 | |
ff506172 HS |
655 | return 0; |
656 | ||
657 | err_clock: | |
658 | dev_dbg(this->dev, "failed in finding the clocks.\n"); | |
d1cb556c | 659 | return err; |
ff506172 HS |
660 | } |
661 | ||
06f25510 | 662 | static int acquire_resources(struct gpmi_nand_data *this) |
10a2bcae | 663 | { |
10a2bcae HS |
664 | int ret; |
665 | ||
666 | ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME); | |
667 | if (ret) | |
668 | goto exit_regs; | |
669 | ||
670 | ret = acquire_register_block(this, GPMI_NAND_BCH_REGS_ADDR_RES_NAME); | |
671 | if (ret) | |
672 | goto exit_regs; | |
673 | ||
674 | ret = acquire_bch_irq(this, bch_irq); | |
675 | if (ret) | |
676 | goto exit_regs; | |
677 | ||
678 | ret = acquire_dma_channels(this); | |
679 | if (ret) | |
3cb2c1ed | 680 | goto exit_regs; |
10a2bcae | 681 | |
ff506172 HS |
682 | ret = gpmi_get_clks(this); |
683 | if (ret) | |
10a2bcae | 684 | goto exit_clock; |
10a2bcae HS |
685 | return 0; |
686 | ||
687 | exit_clock: | |
688 | release_dma_channels(this); | |
10a2bcae | 689 | exit_regs: |
10a2bcae HS |
690 | return ret; |
691 | } | |
692 | ||
693 | static void release_resources(struct gpmi_nand_data *this) | |
694 | { | |
10a2bcae HS |
695 | release_dma_channels(this); |
696 | } | |
697 | ||
06f25510 | 698 | static int init_hardware(struct gpmi_nand_data *this) |
10a2bcae HS |
699 | { |
700 | int ret; | |
701 | ||
702 | /* | |
703 | * This structure contains the "safe" GPMI timing that should succeed | |
704 | * with any NAND Flash device | |
705 | * (although, with less-than-optimal performance). | |
706 | */ | |
707 | struct nand_timing safe_timing = { | |
708 | .data_setup_in_ns = 80, | |
709 | .data_hold_in_ns = 60, | |
710 | .address_setup_in_ns = 25, | |
711 | .gpmi_sample_delay_in_ns = 6, | |
712 | .tREA_in_ns = -1, | |
713 | .tRLOH_in_ns = -1, | |
714 | .tRHOH_in_ns = -1, | |
715 | }; | |
716 | ||
717 | /* Initialize the hardwares. */ | |
718 | ret = gpmi_init(this); | |
719 | if (ret) | |
720 | return ret; | |
721 | ||
722 | this->timing = safe_timing; | |
723 | return 0; | |
724 | } | |
725 | ||
726 | static int read_page_prepare(struct gpmi_nand_data *this, | |
727 | void *destination, unsigned length, | |
728 | void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, | |
729 | void **use_virt, dma_addr_t *use_phys) | |
730 | { | |
731 | struct device *dev = this->dev; | |
732 | ||
733 | if (virt_addr_valid(destination)) { | |
734 | dma_addr_t dest_phys; | |
735 | ||
736 | dest_phys = dma_map_single(dev, destination, | |
737 | length, DMA_FROM_DEVICE); | |
738 | if (dma_mapping_error(dev, dest_phys)) { | |
739 | if (alt_size < length) { | |
da40c16a | 740 | dev_err(dev, "Alternate buffer is too small\n"); |
10a2bcae HS |
741 | return -ENOMEM; |
742 | } | |
743 | goto map_failed; | |
744 | } | |
745 | *use_virt = destination; | |
746 | *use_phys = dest_phys; | |
747 | this->direct_dma_map_ok = true; | |
748 | return 0; | |
749 | } | |
750 | ||
751 | map_failed: | |
752 | *use_virt = alt_virt; | |
753 | *use_phys = alt_phys; | |
754 | this->direct_dma_map_ok = false; | |
755 | return 0; | |
756 | } | |
757 | ||
758 | static inline void read_page_end(struct gpmi_nand_data *this, | |
759 | void *destination, unsigned length, | |
760 | void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, | |
761 | void *used_virt, dma_addr_t used_phys) | |
762 | { | |
763 | if (this->direct_dma_map_ok) | |
764 | dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE); | |
765 | } | |
766 | ||
767 | static inline void read_page_swap_end(struct gpmi_nand_data *this, | |
768 | void *destination, unsigned length, | |
769 | void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, | |
770 | void *used_virt, dma_addr_t used_phys) | |
771 | { | |
772 | if (!this->direct_dma_map_ok) | |
773 | memcpy(destination, alt_virt, length); | |
774 | } | |
775 | ||
776 | static int send_page_prepare(struct gpmi_nand_data *this, | |
777 | const void *source, unsigned length, | |
778 | void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, | |
779 | const void **use_virt, dma_addr_t *use_phys) | |
780 | { | |
781 | struct device *dev = this->dev; | |
782 | ||
783 | if (virt_addr_valid(source)) { | |
784 | dma_addr_t source_phys; | |
785 | ||
786 | source_phys = dma_map_single(dev, (void *)source, length, | |
787 | DMA_TO_DEVICE); | |
788 | if (dma_mapping_error(dev, source_phys)) { | |
789 | if (alt_size < length) { | |
da40c16a | 790 | dev_err(dev, "Alternate buffer is too small\n"); |
10a2bcae HS |
791 | return -ENOMEM; |
792 | } | |
793 | goto map_failed; | |
794 | } | |
795 | *use_virt = source; | |
796 | *use_phys = source_phys; | |
797 | return 0; | |
798 | } | |
799 | map_failed: | |
800 | /* | |
801 | * Copy the content of the source buffer into the alternate | |
802 | * buffer and set up the return values accordingly. | |
803 | */ | |
804 | memcpy(alt_virt, source, length); | |
805 | ||
806 | *use_virt = alt_virt; | |
807 | *use_phys = alt_phys; | |
808 | return 0; | |
809 | } | |
810 | ||
811 | static void send_page_end(struct gpmi_nand_data *this, | |
812 | const void *source, unsigned length, | |
813 | void *alt_virt, dma_addr_t alt_phys, unsigned alt_size, | |
814 | const void *used_virt, dma_addr_t used_phys) | |
815 | { | |
816 | struct device *dev = this->dev; | |
817 | if (used_virt == source) | |
818 | dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE); | |
819 | } | |
820 | ||
821 | static void gpmi_free_dma_buffer(struct gpmi_nand_data *this) | |
822 | { | |
823 | struct device *dev = this->dev; | |
824 | ||
825 | if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt)) | |
826 | dma_free_coherent(dev, this->page_buffer_size, | |
827 | this->page_buffer_virt, | |
828 | this->page_buffer_phys); | |
829 | kfree(this->cmd_buffer); | |
830 | kfree(this->data_buffer_dma); | |
da3bc42c | 831 | kfree(this->raw_buffer); |
10a2bcae HS |
832 | |
833 | this->cmd_buffer = NULL; | |
834 | this->data_buffer_dma = NULL; | |
2cd395d1 | 835 | this->raw_buffer = NULL; |
10a2bcae HS |
836 | this->page_buffer_virt = NULL; |
837 | this->page_buffer_size = 0; | |
838 | } | |
839 | ||
840 | /* Allocate the DMA buffers */ | |
841 | static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) | |
842 | { | |
843 | struct bch_geometry *geo = &this->bch_geometry; | |
844 | struct device *dev = this->dev; | |
2a690b25 | 845 | struct mtd_info *mtd = nand_to_mtd(&this->nand); |
10a2bcae HS |
846 | |
847 | /* [1] Allocate a command buffer. PAGE_SIZE is enough. */ | |
513d57e1 | 848 | this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL); |
10a2bcae HS |
849 | if (this->cmd_buffer == NULL) |
850 | goto error_alloc; | |
851 | ||
06f216c8 HS |
852 | /* |
853 | * [2] Allocate a read/write data buffer. | |
854 | * The gpmi_alloc_dma_buffer can be called twice. | |
855 | * We allocate a PAGE_SIZE length buffer if gpmi_alloc_dma_buffer | |
856 | * is called before the nand_scan_ident; and we allocate a buffer | |
857 | * of the real NAND page size when the gpmi_alloc_dma_buffer is | |
858 | * called after the nand_scan_ident. | |
859 | */ | |
860 | this->data_buffer_dma = kzalloc(mtd->writesize ?: PAGE_SIZE, | |
861 | GFP_DMA | GFP_KERNEL); | |
10a2bcae HS |
862 | if (this->data_buffer_dma == NULL) |
863 | goto error_alloc; | |
864 | ||
865 | /* | |
866 | * [3] Allocate the page buffer. | |
867 | * | |
868 | * Both the payload buffer and the auxiliary buffer must appear on | |
869 | * 32-bit boundaries. We presume the size of the payload buffer is a | |
870 | * power of two and is much larger than four, which guarantees the | |
871 | * auxiliary buffer will appear on a 32-bit boundary. | |
872 | */ | |
873 | this->page_buffer_size = geo->payload_size + geo->auxiliary_size; | |
874 | this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size, | |
875 | &this->page_buffer_phys, GFP_DMA); | |
876 | if (!this->page_buffer_virt) | |
877 | goto error_alloc; | |
878 | ||
da3bc42c BB |
879 | this->raw_buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); |
880 | if (!this->raw_buffer) | |
881 | goto error_alloc; | |
10a2bcae HS |
882 | |
883 | /* Slice up the page buffer. */ | |
884 | this->payload_virt = this->page_buffer_virt; | |
885 | this->payload_phys = this->page_buffer_phys; | |
886 | this->auxiliary_virt = this->payload_virt + geo->payload_size; | |
887 | this->auxiliary_phys = this->payload_phys + geo->payload_size; | |
888 | return 0; | |
889 | ||
890 | error_alloc: | |
891 | gpmi_free_dma_buffer(this); | |
10a2bcae HS |
892 | return -ENOMEM; |
893 | } | |
894 | ||
895 | static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) | |
896 | { | |
4bd4ebcc | 897 | struct nand_chip *chip = mtd_to_nand(mtd); |
d699ed25 | 898 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae HS |
899 | int ret; |
900 | ||
901 | /* | |
902 | * Every operation begins with a command byte and a series of zero or | |
903 | * more address bytes. These are distinguished by either the Address | |
904 | * Latch Enable (ALE) or Command Latch Enable (CLE) signals being | |
905 | * asserted. When MTD is ready to execute the command, it will deassert | |
906 | * both latch enables. | |
907 | * | |
908 | * Rather than run a separate DMA operation for every single byte, we | |
909 | * queue them up and run a single DMA operation for the entire series | |
910 | * of command and data bytes. NAND_CMD_NONE means the END of the queue. | |
911 | */ | |
912 | if ((ctrl & (NAND_ALE | NAND_CLE))) { | |
913 | if (data != NAND_CMD_NONE) | |
914 | this->cmd_buffer[this->command_length++] = data; | |
915 | return; | |
916 | } | |
917 | ||
918 | if (!this->command_length) | |
919 | return; | |
920 | ||
921 | ret = gpmi_send_command(this); | |
922 | if (ret) | |
da40c16a HS |
923 | dev_err(this->dev, "Chip: %u, Error %d\n", |
924 | this->current_chip, ret); | |
10a2bcae HS |
925 | |
926 | this->command_length = 0; | |
927 | } | |
928 | ||
929 | static int gpmi_dev_ready(struct mtd_info *mtd) | |
930 | { | |
4bd4ebcc | 931 | struct nand_chip *chip = mtd_to_nand(mtd); |
d699ed25 | 932 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae HS |
933 | |
934 | return gpmi_is_ready(this, this->current_chip); | |
935 | } | |
936 | ||
937 | static void gpmi_select_chip(struct mtd_info *mtd, int chipnr) | |
938 | { | |
4bd4ebcc | 939 | struct nand_chip *chip = mtd_to_nand(mtd); |
d699ed25 | 940 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae HS |
941 | |
942 | if ((this->current_chip < 0) && (chipnr >= 0)) | |
943 | gpmi_begin(this); | |
944 | else if ((this->current_chip >= 0) && (chipnr < 0)) | |
945 | gpmi_end(this); | |
946 | ||
947 | this->current_chip = chipnr; | |
948 | } | |
949 | ||
950 | static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) | |
951 | { | |
4bd4ebcc | 952 | struct nand_chip *chip = mtd_to_nand(mtd); |
d699ed25 | 953 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae | 954 | |
c2325962 | 955 | dev_dbg(this->dev, "len is %d\n", len); |
10a2bcae HS |
956 | this->upper_buf = buf; |
957 | this->upper_len = len; | |
958 | ||
959 | gpmi_read_data(this); | |
960 | } | |
961 | ||
962 | static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) | |
963 | { | |
4bd4ebcc | 964 | struct nand_chip *chip = mtd_to_nand(mtd); |
d699ed25 | 965 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae | 966 | |
c2325962 | 967 | dev_dbg(this->dev, "len is %d\n", len); |
10a2bcae HS |
968 | this->upper_buf = (uint8_t *)buf; |
969 | this->upper_len = len; | |
970 | ||
971 | gpmi_send_data(this); | |
972 | } | |
973 | ||
974 | static uint8_t gpmi_read_byte(struct mtd_info *mtd) | |
975 | { | |
4bd4ebcc | 976 | struct nand_chip *chip = mtd_to_nand(mtd); |
d699ed25 | 977 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae HS |
978 | uint8_t *buf = this->data_buffer_dma; |
979 | ||
980 | gpmi_read_buf(mtd, buf, 1); | |
981 | return buf[0]; | |
982 | } | |
983 | ||
984 | /* | |
985 | * Handles block mark swapping. | |
986 | * It can be called in swapping the block mark, or swapping it back, | |
987 | * because the the operations are the same. | |
988 | */ | |
989 | static void block_mark_swapping(struct gpmi_nand_data *this, | |
990 | void *payload, void *auxiliary) | |
991 | { | |
992 | struct bch_geometry *nfc_geo = &this->bch_geometry; | |
993 | unsigned char *p; | |
994 | unsigned char *a; | |
995 | unsigned int bit; | |
996 | unsigned char mask; | |
997 | unsigned char from_data; | |
998 | unsigned char from_oob; | |
999 | ||
1000 | if (!this->swap_block_mark) | |
1001 | return; | |
1002 | ||
1003 | /* | |
1004 | * If control arrives here, we're swapping. Make some convenience | |
1005 | * variables. | |
1006 | */ | |
1007 | bit = nfc_geo->block_mark_bit_offset; | |
1008 | p = payload + nfc_geo->block_mark_byte_offset; | |
1009 | a = auxiliary; | |
1010 | ||
1011 | /* | |
1012 | * Get the byte from the data area that overlays the block mark. Since | |
1013 | * the ECC engine applies its own view to the bits in the page, the | |
1014 | * physical block mark won't (in general) appear on a byte boundary in | |
1015 | * the data. | |
1016 | */ | |
1017 | from_data = (p[0] >> bit) | (p[1] << (8 - bit)); | |
1018 | ||
1019 | /* Get the byte from the OOB. */ | |
1020 | from_oob = a[0]; | |
1021 | ||
1022 | /* Swap them. */ | |
1023 | a[0] = from_data; | |
1024 | ||
1025 | mask = (0x1 << bit) - 1; | |
1026 | p[0] = (p[0] & mask) | (from_oob << bit); | |
1027 | ||
1028 | mask = ~0 << bit; | |
1029 | p[1] = (p[1] & mask) | (from_oob >> (8 - bit)); | |
1030 | } | |
1031 | ||
1032 | static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, | |
1fbb938d | 1033 | uint8_t *buf, int oob_required, int page) |
10a2bcae | 1034 | { |
d699ed25 | 1035 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae HS |
1036 | struct bch_geometry *nfc_geo = &this->bch_geometry; |
1037 | void *payload_virt; | |
1038 | dma_addr_t payload_phys; | |
1039 | void *auxiliary_virt; | |
1040 | dma_addr_t auxiliary_phys; | |
1041 | unsigned int i; | |
1042 | unsigned char *status; | |
b23b746c | 1043 | unsigned int max_bitflips = 0; |
10a2bcae HS |
1044 | int ret; |
1045 | ||
c2325962 | 1046 | dev_dbg(this->dev, "page number is : %d\n", page); |
4a57d670 | 1047 | ret = read_page_prepare(this, buf, nfc_geo->payload_size, |
10a2bcae HS |
1048 | this->payload_virt, this->payload_phys, |
1049 | nfc_geo->payload_size, | |
1050 | &payload_virt, &payload_phys); | |
1051 | if (ret) { | |
da40c16a | 1052 | dev_err(this->dev, "Inadequate DMA buffer\n"); |
10a2bcae HS |
1053 | ret = -ENOMEM; |
1054 | return ret; | |
1055 | } | |
1056 | auxiliary_virt = this->auxiliary_virt; | |
1057 | auxiliary_phys = this->auxiliary_phys; | |
1058 | ||
1059 | /* go! */ | |
1060 | ret = gpmi_read_page(this, payload_phys, auxiliary_phys); | |
4a57d670 | 1061 | read_page_end(this, buf, nfc_geo->payload_size, |
10a2bcae HS |
1062 | this->payload_virt, this->payload_phys, |
1063 | nfc_geo->payload_size, | |
1064 | payload_virt, payload_phys); | |
1065 | if (ret) { | |
da40c16a | 1066 | dev_err(this->dev, "Error in ECC-based read: %d\n", ret); |
b23b746c | 1067 | return ret; |
10a2bcae HS |
1068 | } |
1069 | ||
1070 | /* handle the block mark swapping */ | |
1071 | block_mark_swapping(this, payload_virt, auxiliary_virt); | |
1072 | ||
1073 | /* Loop over status bytes, accumulating ECC status. */ | |
b23b746c | 1074 | status = auxiliary_virt + nfc_geo->auxiliary_status_offset; |
10a2bcae | 1075 | |
bd2e778c MP |
1076 | read_page_swap_end(this, buf, nfc_geo->payload_size, |
1077 | this->payload_virt, this->payload_phys, | |
1078 | nfc_geo->payload_size, | |
1079 | payload_virt, payload_phys); | |
1080 | ||
10a2bcae HS |
1081 | for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) { |
1082 | if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED)) | |
1083 | continue; | |
1084 | ||
1085 | if (*status == STATUS_UNCORRECTABLE) { | |
bd2e778c MP |
1086 | int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len; |
1087 | u8 *eccbuf = this->raw_buffer; | |
1088 | int offset, bitoffset; | |
1089 | int eccbytes; | |
1090 | int flips; | |
1091 | ||
1092 | /* Read ECC bytes into our internal raw_buffer */ | |
1093 | offset = nfc_geo->metadata_size * 8; | |
1094 | offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1); | |
1095 | offset -= eccbits; | |
1096 | bitoffset = offset % 8; | |
1097 | eccbytes = DIV_ROUND_UP(offset + eccbits, 8); | |
1098 | offset /= 8; | |
1099 | eccbytes -= offset; | |
1100 | chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); | |
1101 | chip->read_buf(mtd, eccbuf, eccbytes); | |
1102 | ||
1103 | /* | |
1104 | * ECC data are not byte aligned and we may have | |
1105 | * in-band data in the first and last byte of | |
1106 | * eccbuf. Set non-eccbits to one so that | |
1107 | * nand_check_erased_ecc_chunk() does not count them | |
1108 | * as bitflips. | |
1109 | */ | |
1110 | if (bitoffset) | |
1111 | eccbuf[0] |= GENMASK(bitoffset - 1, 0); | |
1112 | ||
1113 | bitoffset = (bitoffset + eccbits) % 8; | |
1114 | if (bitoffset) | |
1115 | eccbuf[eccbytes - 1] |= GENMASK(7, bitoffset); | |
1116 | ||
1117 | /* | |
1118 | * The ECC hardware has an uncorrectable ECC status | |
1119 | * code in case we have bitflips in an erased page. As | |
1120 | * nothing was written into this subpage the ECC is | |
1121 | * obviously wrong and we can not trust it. We assume | |
1122 | * at this point that we are reading an erased page and | |
1123 | * try to correct the bitflips in buffer up to | |
1124 | * ecc_strength bitflips. If this is a page with random | |
1125 | * data, we exceed this number of bitflips and have a | |
1126 | * ECC failure. Otherwise we use the corrected buffer. | |
1127 | */ | |
1128 | if (i == 0) { | |
1129 | /* The first block includes metadata */ | |
1130 | flips = nand_check_erased_ecc_chunk( | |
1131 | buf + i * nfc_geo->ecc_chunk_size, | |
1132 | nfc_geo->ecc_chunk_size, | |
1133 | eccbuf, eccbytes, | |
1134 | auxiliary_virt, | |
1135 | nfc_geo->metadata_size, | |
1136 | nfc_geo->ecc_strength); | |
1137 | } else { | |
1138 | flips = nand_check_erased_ecc_chunk( | |
1139 | buf + i * nfc_geo->ecc_chunk_size, | |
1140 | nfc_geo->ecc_chunk_size, | |
1141 | eccbuf, eccbytes, | |
1142 | NULL, 0, | |
1143 | nfc_geo->ecc_strength); | |
1144 | } | |
1145 | ||
1146 | if (flips > 0) { | |
1147 | max_bitflips = max_t(unsigned int, max_bitflips, | |
1148 | flips); | |
1149 | mtd->ecc_stats.corrected += flips; | |
1150 | continue; | |
1151 | } | |
1152 | ||
b23b746c | 1153 | mtd->ecc_stats.failed++; |
10a2bcae HS |
1154 | continue; |
1155 | } | |
bd2e778c | 1156 | |
b23b746c ZS |
1157 | mtd->ecc_stats.corrected += *status; |
1158 | max_bitflips = max_t(unsigned int, max_bitflips, *status); | |
10a2bcae HS |
1159 | } |
1160 | ||
7725cc85 BN |
1161 | if (oob_required) { |
1162 | /* | |
1163 | * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() | |
1164 | * for details about our policy for delivering the OOB. | |
1165 | * | |
1166 | * We fill the caller's buffer with set bits, and then copy the | |
1167 | * block mark to th caller's buffer. Note that, if block mark | |
1168 | * swapping was necessary, it has already been done, so we can | |
1169 | * rely on the first byte of the auxiliary buffer to contain | |
1170 | * the block mark. | |
1171 | */ | |
1172 | memset(chip->oob_poi, ~0, mtd->oobsize); | |
1173 | chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; | |
7725cc85 | 1174 | } |
6023813a | 1175 | |
b23b746c | 1176 | return max_bitflips; |
10a2bcae HS |
1177 | } |
1178 | ||
b8e2931d HS |
1179 | /* Fake a virtual small page for the subpage read */ |
1180 | static int gpmi_ecc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, | |
1181 | uint32_t offs, uint32_t len, uint8_t *buf, int page) | |
1182 | { | |
d699ed25 | 1183 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
b8e2931d HS |
1184 | void __iomem *bch_regs = this->resources.bch_regs; |
1185 | struct bch_geometry old_geo = this->bch_geometry; | |
1186 | struct bch_geometry *geo = &this->bch_geometry; | |
1187 | int size = chip->ecc.size; /* ECC chunk size */ | |
1188 | int meta, n, page_size; | |
1189 | u32 r1_old, r2_old, r1_new, r2_new; | |
1190 | unsigned int max_bitflips; | |
1191 | int first, last, marker_pos; | |
1192 | int ecc_parity_size; | |
1193 | int col = 0; | |
2a500afe | 1194 | int old_swap_block_mark = this->swap_block_mark; |
b8e2931d HS |
1195 | |
1196 | /* The size of ECC parity */ | |
1197 | ecc_parity_size = geo->gf_len * geo->ecc_strength / 8; | |
1198 | ||
1199 | /* Align it with the chunk size */ | |
1200 | first = offs / size; | |
1201 | last = (offs + len - 1) / size; | |
1202 | ||
2a500afe LW |
1203 | if (this->swap_block_mark) { |
1204 | /* | |
1205 | * Find the chunk which contains the Block Marker. | |
1206 | * If this chunk is in the range of [first, last], | |
1207 | * we have to read out the whole page. | |
1208 | * Why? since we had swapped the data at the position of Block | |
1209 | * Marker to the metadata which is bound with the chunk 0. | |
1210 | */ | |
1211 | marker_pos = geo->block_mark_byte_offset / size; | |
1212 | if (last >= marker_pos && first <= marker_pos) { | |
1213 | dev_dbg(this->dev, | |
1214 | "page:%d, first:%d, last:%d, marker at:%d\n", | |
b8e2931d | 1215 | page, first, last, marker_pos); |
2a500afe LW |
1216 | return gpmi_ecc_read_page(mtd, chip, buf, 0, page); |
1217 | } | |
b8e2931d HS |
1218 | } |
1219 | ||
1220 | meta = geo->metadata_size; | |
1221 | if (first) { | |
1222 | col = meta + (size + ecc_parity_size) * first; | |
1223 | chip->cmdfunc(mtd, NAND_CMD_RNDOUT, col, -1); | |
1224 | ||
1225 | meta = 0; | |
1226 | buf = buf + first * size; | |
1227 | } | |
1228 | ||
1229 | /* Save the old environment */ | |
1230 | r1_old = r1_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT0); | |
1231 | r2_old = r2_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT1); | |
1232 | ||
1233 | /* change the BCH registers and bch_geometry{} */ | |
1234 | n = last - first + 1; | |
1235 | page_size = meta + (size + ecc_parity_size) * n; | |
1236 | ||
1237 | r1_new &= ~(BM_BCH_FLASH0LAYOUT0_NBLOCKS | | |
1238 | BM_BCH_FLASH0LAYOUT0_META_SIZE); | |
1239 | r1_new |= BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1) | |
1240 | | BF_BCH_FLASH0LAYOUT0_META_SIZE(meta); | |
1241 | writel(r1_new, bch_regs + HW_BCH_FLASH0LAYOUT0); | |
1242 | ||
1243 | r2_new &= ~BM_BCH_FLASH0LAYOUT1_PAGE_SIZE; | |
1244 | r2_new |= BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size); | |
1245 | writel(r2_new, bch_regs + HW_BCH_FLASH0LAYOUT1); | |
1246 | ||
1247 | geo->ecc_chunk_count = n; | |
1248 | geo->payload_size = n * size; | |
1249 | geo->page_size = page_size; | |
1250 | geo->auxiliary_status_offset = ALIGN(meta, 4); | |
1251 | ||
1252 | dev_dbg(this->dev, "page:%d(%d:%d)%d, chunk:(%d:%d), BCH PG size:%d\n", | |
1253 | page, offs, len, col, first, n, page_size); | |
1254 | ||
1255 | /* Read the subpage now */ | |
1256 | this->swap_block_mark = false; | |
1257 | max_bitflips = gpmi_ecc_read_page(mtd, chip, buf, 0, page); | |
1258 | ||
1259 | /* Restore */ | |
1260 | writel(r1_old, bch_regs + HW_BCH_FLASH0LAYOUT0); | |
1261 | writel(r2_old, bch_regs + HW_BCH_FLASH0LAYOUT1); | |
1262 | this->bch_geometry = old_geo; | |
2a500afe | 1263 | this->swap_block_mark = old_swap_block_mark; |
b8e2931d HS |
1264 | |
1265 | return max_bitflips; | |
1266 | } | |
1267 | ||
fdbad98d | 1268 | static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, |
45aaeff9 | 1269 | const uint8_t *buf, int oob_required, int page) |
10a2bcae | 1270 | { |
d699ed25 | 1271 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae HS |
1272 | struct bch_geometry *nfc_geo = &this->bch_geometry; |
1273 | const void *payload_virt; | |
1274 | dma_addr_t payload_phys; | |
1275 | const void *auxiliary_virt; | |
1276 | dma_addr_t auxiliary_phys; | |
1277 | int ret; | |
1278 | ||
c2325962 | 1279 | dev_dbg(this->dev, "ecc write page.\n"); |
10a2bcae HS |
1280 | if (this->swap_block_mark) { |
1281 | /* | |
1282 | * If control arrives here, we're doing block mark swapping. | |
1283 | * Since we can't modify the caller's buffers, we must copy them | |
1284 | * into our own. | |
1285 | */ | |
1286 | memcpy(this->payload_virt, buf, mtd->writesize); | |
1287 | payload_virt = this->payload_virt; | |
1288 | payload_phys = this->payload_phys; | |
1289 | ||
1290 | memcpy(this->auxiliary_virt, chip->oob_poi, | |
1291 | nfc_geo->auxiliary_size); | |
1292 | auxiliary_virt = this->auxiliary_virt; | |
1293 | auxiliary_phys = this->auxiliary_phys; | |
1294 | ||
1295 | /* Handle block mark swapping. */ | |
1296 | block_mark_swapping(this, | |
6a760966 | 1297 | (void *)payload_virt, (void *)auxiliary_virt); |
10a2bcae HS |
1298 | } else { |
1299 | /* | |
1300 | * If control arrives here, we're not doing block mark swapping, | |
1301 | * so we can to try and use the caller's buffers. | |
1302 | */ | |
1303 | ret = send_page_prepare(this, | |
1304 | buf, mtd->writesize, | |
1305 | this->payload_virt, this->payload_phys, | |
1306 | nfc_geo->payload_size, | |
1307 | &payload_virt, &payload_phys); | |
1308 | if (ret) { | |
da40c16a | 1309 | dev_err(this->dev, "Inadequate payload DMA buffer\n"); |
fdbad98d | 1310 | return 0; |
10a2bcae HS |
1311 | } |
1312 | ||
1313 | ret = send_page_prepare(this, | |
1314 | chip->oob_poi, mtd->oobsize, | |
1315 | this->auxiliary_virt, this->auxiliary_phys, | |
1316 | nfc_geo->auxiliary_size, | |
1317 | &auxiliary_virt, &auxiliary_phys); | |
1318 | if (ret) { | |
da40c16a | 1319 | dev_err(this->dev, "Inadequate auxiliary DMA buffer\n"); |
10a2bcae HS |
1320 | goto exit_auxiliary; |
1321 | } | |
1322 | } | |
1323 | ||
1324 | /* Ask the NFC. */ | |
1325 | ret = gpmi_send_page(this, payload_phys, auxiliary_phys); | |
1326 | if (ret) | |
da40c16a | 1327 | dev_err(this->dev, "Error in ECC-based write: %d\n", ret); |
10a2bcae HS |
1328 | |
1329 | if (!this->swap_block_mark) { | |
1330 | send_page_end(this, chip->oob_poi, mtd->oobsize, | |
1331 | this->auxiliary_virt, this->auxiliary_phys, | |
1332 | nfc_geo->auxiliary_size, | |
1333 | auxiliary_virt, auxiliary_phys); | |
1334 | exit_auxiliary: | |
1335 | send_page_end(this, buf, mtd->writesize, | |
1336 | this->payload_virt, this->payload_phys, | |
1337 | nfc_geo->payload_size, | |
1338 | payload_virt, payload_phys); | |
1339 | } | |
fdbad98d JW |
1340 | |
1341 | return 0; | |
10a2bcae HS |
1342 | } |
1343 | ||
1344 | /* | |
1345 | * There are several places in this driver where we have to handle the OOB and | |
1346 | * block marks. This is the function where things are the most complicated, so | |
1347 | * this is where we try to explain it all. All the other places refer back to | |
1348 | * here. | |
1349 | * | |
1350 | * These are the rules, in order of decreasing importance: | |
1351 | * | |
1352 | * 1) Nothing the caller does can be allowed to imperil the block mark. | |
1353 | * | |
1354 | * 2) In read operations, the first byte of the OOB we return must reflect the | |
1355 | * true state of the block mark, no matter where that block mark appears in | |
1356 | * the physical page. | |
1357 | * | |
1358 | * 3) ECC-based read operations return an OOB full of set bits (since we never | |
1359 | * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads | |
1360 | * return). | |
1361 | * | |
1362 | * 4) "Raw" read operations return a direct view of the physical bytes in the | |
1363 | * page, using the conventional definition of which bytes are data and which | |
1364 | * are OOB. This gives the caller a way to see the actual, physical bytes | |
1365 | * in the page, without the distortions applied by our ECC engine. | |
1366 | * | |
1367 | * | |
1368 | * What we do for this specific read operation depends on two questions: | |
1369 | * | |
1370 | * 1) Are we doing a "raw" read, or an ECC-based read? | |
1371 | * | |
1372 | * 2) Are we using block mark swapping or transcription? | |
1373 | * | |
1374 | * There are four cases, illustrated by the following Karnaugh map: | |
1375 | * | |
1376 | * | Raw | ECC-based | | |
1377 | * -------------+-------------------------+-------------------------+ | |
1378 | * | Read the conventional | | | |
1379 | * | OOB at the end of the | | | |
1380 | * Swapping | page and return it. It | | | |
1381 | * | contains exactly what | | | |
1382 | * | we want. | Read the block mark and | | |
1383 | * -------------+-------------------------+ return it in a buffer | | |
1384 | * | Read the conventional | full of set bits. | | |
1385 | * | OOB at the end of the | | | |
1386 | * | page and also the block | | | |
1387 | * Transcribing | mark in the metadata. | | | |
1388 | * | Copy the block mark | | | |
1389 | * | into the first byte of | | | |
1390 | * | the OOB. | | | |
1391 | * -------------+-------------------------+-------------------------+ | |
1392 | * | |
1393 | * Note that we break rule #4 in the Transcribing/Raw case because we're not | |
1394 | * giving an accurate view of the actual, physical bytes in the page (we're | |
1395 | * overwriting the block mark). That's OK because it's more important to follow | |
1396 | * rule #2. | |
1397 | * | |
1398 | * It turns out that knowing whether we want an "ECC-based" or "raw" read is not | |
1399 | * easy. When reading a page, for example, the NAND Flash MTD code calls our | |
1400 | * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an | |
1401 | * ECC-based or raw view of the page is implicit in which function it calls | |
1402 | * (there is a similar pair of ECC-based/raw functions for writing). | |
10a2bcae HS |
1403 | */ |
1404 | static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, | |
5c2ffb11 | 1405 | int page) |
10a2bcae | 1406 | { |
d699ed25 | 1407 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
10a2bcae | 1408 | |
c2325962 | 1409 | dev_dbg(this->dev, "page number is %d\n", page); |
10a2bcae HS |
1410 | /* clear the OOB buffer */ |
1411 | memset(chip->oob_poi, ~0, mtd->oobsize); | |
1412 | ||
1413 | /* Read out the conventional OOB. */ | |
1414 | chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page); | |
1415 | chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); | |
1416 | ||
1417 | /* | |
1418 | * Now, we want to make sure the block mark is correct. In the | |
2a500afe LW |
1419 | * non-transcribing case (!GPMI_IS_MX23()), we already have it. |
1420 | * Otherwise, we need to explicitly read it. | |
10a2bcae | 1421 | */ |
2a500afe | 1422 | if (GPMI_IS_MX23(this)) { |
10a2bcae HS |
1423 | /* Read the block mark into the first byte of the OOB buffer. */ |
1424 | chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); | |
1425 | chip->oob_poi[0] = chip->read_byte(mtd); | |
1426 | } | |
1427 | ||
5c2ffb11 | 1428 | return 0; |
10a2bcae HS |
1429 | } |
1430 | ||
1431 | static int | |
1432 | gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) | |
1433 | { | |
191a8294 | 1434 | struct mtd_oob_region of = { }; |
7a2b89ac HS |
1435 | int status = 0; |
1436 | ||
1437 | /* Do we have available oob area? */ | |
191a8294 BB |
1438 | mtd_ooblayout_free(mtd, 0, &of); |
1439 | if (!of.length) | |
7a2b89ac HS |
1440 | return -EPERM; |
1441 | ||
1442 | if (!nand_is_slc(chip)) | |
1443 | return -EPERM; | |
1444 | ||
191a8294 BB |
1445 | chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of.offset, page); |
1446 | chip->write_buf(mtd, chip->oob_poi + of.offset, of.length); | |
7a2b89ac HS |
1447 | chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); |
1448 | ||
1449 | status = chip->waitfunc(mtd, chip); | |
1450 | return status & NAND_STATUS_FAIL ? -EIO : 0; | |
10a2bcae HS |
1451 | } |
1452 | ||
da3bc42c BB |
1453 | /* |
1454 | * This function reads a NAND page without involving the ECC engine (no HW | |
1455 | * ECC correction). | |
1456 | * The tricky part in the GPMI/BCH controller is that it stores ECC bits | |
1457 | * inline (interleaved with payload DATA), and do not align data chunk on | |
1458 | * byte boundaries. | |
1459 | * We thus need to take care moving the payload data and ECC bits stored in the | |
1460 | * page into the provided buffers, which is why we're using gpmi_copy_bits. | |
1461 | * | |
1462 | * See set_geometry_by_ecc_info inline comments to have a full description | |
1463 | * of the layout used by the GPMI controller. | |
1464 | */ | |
1465 | static int gpmi_ecc_read_page_raw(struct mtd_info *mtd, | |
1466 | struct nand_chip *chip, uint8_t *buf, | |
1467 | int oob_required, int page) | |
1468 | { | |
d699ed25 | 1469 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
da3bc42c BB |
1470 | struct bch_geometry *nfc_geo = &this->bch_geometry; |
1471 | int eccsize = nfc_geo->ecc_chunk_size; | |
1472 | int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len; | |
1473 | u8 *tmp_buf = this->raw_buffer; | |
1474 | size_t src_bit_off; | |
1475 | size_t oob_bit_off; | |
1476 | size_t oob_byte_off; | |
1477 | uint8_t *oob = chip->oob_poi; | |
1478 | int step; | |
1479 | ||
1480 | chip->read_buf(mtd, tmp_buf, | |
1481 | mtd->writesize + mtd->oobsize); | |
1482 | ||
1483 | /* | |
1484 | * If required, swap the bad block marker and the data stored in the | |
1485 | * metadata section, so that we don't wrongly consider a block as bad. | |
1486 | * | |
1487 | * See the layout description for a detailed explanation on why this | |
1488 | * is needed. | |
1489 | */ | |
1490 | if (this->swap_block_mark) { | |
1491 | u8 swap = tmp_buf[0]; | |
1492 | ||
1493 | tmp_buf[0] = tmp_buf[mtd->writesize]; | |
1494 | tmp_buf[mtd->writesize] = swap; | |
1495 | } | |
1496 | ||
1497 | /* | |
1498 | * Copy the metadata section into the oob buffer (this section is | |
1499 | * guaranteed to be aligned on a byte boundary). | |
1500 | */ | |
1501 | if (oob_required) | |
1502 | memcpy(oob, tmp_buf, nfc_geo->metadata_size); | |
1503 | ||
1504 | oob_bit_off = nfc_geo->metadata_size * 8; | |
1505 | src_bit_off = oob_bit_off; | |
1506 | ||
1507 | /* Extract interleaved payload data and ECC bits */ | |
1508 | for (step = 0; step < nfc_geo->ecc_chunk_count; step++) { | |
1509 | if (buf) | |
1510 | gpmi_copy_bits(buf, step * eccsize * 8, | |
1511 | tmp_buf, src_bit_off, | |
1512 | eccsize * 8); | |
1513 | src_bit_off += eccsize * 8; | |
1514 | ||
1515 | /* Align last ECC block to align a byte boundary */ | |
1516 | if (step == nfc_geo->ecc_chunk_count - 1 && | |
1517 | (oob_bit_off + eccbits) % 8) | |
1518 | eccbits += 8 - ((oob_bit_off + eccbits) % 8); | |
1519 | ||
1520 | if (oob_required) | |
1521 | gpmi_copy_bits(oob, oob_bit_off, | |
1522 | tmp_buf, src_bit_off, | |
1523 | eccbits); | |
1524 | ||
1525 | src_bit_off += eccbits; | |
1526 | oob_bit_off += eccbits; | |
1527 | } | |
1528 | ||
1529 | if (oob_required) { | |
1530 | oob_byte_off = oob_bit_off / 8; | |
1531 | ||
1532 | if (oob_byte_off < mtd->oobsize) | |
1533 | memcpy(oob + oob_byte_off, | |
1534 | tmp_buf + mtd->writesize + oob_byte_off, | |
1535 | mtd->oobsize - oob_byte_off); | |
1536 | } | |
1537 | ||
1538 | return 0; | |
1539 | } | |
1540 | ||
1541 | /* | |
1542 | * This function writes a NAND page without involving the ECC engine (no HW | |
1543 | * ECC generation). | |
1544 | * The tricky part in the GPMI/BCH controller is that it stores ECC bits | |
1545 | * inline (interleaved with payload DATA), and do not align data chunk on | |
1546 | * byte boundaries. | |
1547 | * We thus need to take care moving the OOB area at the right place in the | |
1548 | * final page, which is why we're using gpmi_copy_bits. | |
1549 | * | |
1550 | * See set_geometry_by_ecc_info inline comments to have a full description | |
1551 | * of the layout used by the GPMI controller. | |
1552 | */ | |
1553 | static int gpmi_ecc_write_page_raw(struct mtd_info *mtd, | |
1554 | struct nand_chip *chip, | |
1555 | const uint8_t *buf, | |
45aaeff9 | 1556 | int oob_required, int page) |
da3bc42c | 1557 | { |
d699ed25 | 1558 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
da3bc42c BB |
1559 | struct bch_geometry *nfc_geo = &this->bch_geometry; |
1560 | int eccsize = nfc_geo->ecc_chunk_size; | |
1561 | int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len; | |
1562 | u8 *tmp_buf = this->raw_buffer; | |
1563 | uint8_t *oob = chip->oob_poi; | |
1564 | size_t dst_bit_off; | |
1565 | size_t oob_bit_off; | |
1566 | size_t oob_byte_off; | |
1567 | int step; | |
1568 | ||
1569 | /* | |
1570 | * Initialize all bits to 1 in case we don't have a buffer for the | |
1571 | * payload or oob data in order to leave unspecified bits of data | |
1572 | * to their initial state. | |
1573 | */ | |
1574 | if (!buf || !oob_required) | |
1575 | memset(tmp_buf, 0xff, mtd->writesize + mtd->oobsize); | |
1576 | ||
1577 | /* | |
1578 | * First copy the metadata section (stored in oob buffer) at the | |
1579 | * beginning of the page, as imposed by the GPMI layout. | |
1580 | */ | |
1581 | memcpy(tmp_buf, oob, nfc_geo->metadata_size); | |
1582 | oob_bit_off = nfc_geo->metadata_size * 8; | |
1583 | dst_bit_off = oob_bit_off; | |
1584 | ||
1585 | /* Interleave payload data and ECC bits */ | |
1586 | for (step = 0; step < nfc_geo->ecc_chunk_count; step++) { | |
1587 | if (buf) | |
1588 | gpmi_copy_bits(tmp_buf, dst_bit_off, | |
1589 | buf, step * eccsize * 8, eccsize * 8); | |
1590 | dst_bit_off += eccsize * 8; | |
1591 | ||
1592 | /* Align last ECC block to align a byte boundary */ | |
1593 | if (step == nfc_geo->ecc_chunk_count - 1 && | |
1594 | (oob_bit_off + eccbits) % 8) | |
1595 | eccbits += 8 - ((oob_bit_off + eccbits) % 8); | |
1596 | ||
1597 | if (oob_required) | |
1598 | gpmi_copy_bits(tmp_buf, dst_bit_off, | |
1599 | oob, oob_bit_off, eccbits); | |
1600 | ||
1601 | dst_bit_off += eccbits; | |
1602 | oob_bit_off += eccbits; | |
1603 | } | |
1604 | ||
1605 | oob_byte_off = oob_bit_off / 8; | |
1606 | ||
1607 | if (oob_required && oob_byte_off < mtd->oobsize) | |
1608 | memcpy(tmp_buf + mtd->writesize + oob_byte_off, | |
1609 | oob + oob_byte_off, mtd->oobsize - oob_byte_off); | |
1610 | ||
1611 | /* | |
1612 | * If required, swap the bad block marker and the first byte of the | |
1613 | * metadata section, so that we don't modify the bad block marker. | |
1614 | * | |
1615 | * See the layout description for a detailed explanation on why this | |
1616 | * is needed. | |
1617 | */ | |
1618 | if (this->swap_block_mark) { | |
1619 | u8 swap = tmp_buf[0]; | |
1620 | ||
1621 | tmp_buf[0] = tmp_buf[mtd->writesize]; | |
1622 | tmp_buf[mtd->writesize] = swap; | |
1623 | } | |
1624 | ||
1625 | chip->write_buf(mtd, tmp_buf, mtd->writesize + mtd->oobsize); | |
1626 | ||
1627 | return 0; | |
1628 | } | |
1629 | ||
7ca94e07 BB |
1630 | static int gpmi_ecc_read_oob_raw(struct mtd_info *mtd, struct nand_chip *chip, |
1631 | int page) | |
1632 | { | |
1633 | chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); | |
1634 | ||
1635 | return gpmi_ecc_read_page_raw(mtd, chip, NULL, 1, page); | |
1636 | } | |
1637 | ||
1638 | static int gpmi_ecc_write_oob_raw(struct mtd_info *mtd, struct nand_chip *chip, | |
1639 | int page) | |
1640 | { | |
1641 | chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page); | |
1642 | ||
45aaeff9 | 1643 | return gpmi_ecc_write_page_raw(mtd, chip, NULL, 1, page); |
7ca94e07 BB |
1644 | } |
1645 | ||
10a2bcae HS |
1646 | static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs) |
1647 | { | |
4bd4ebcc | 1648 | struct nand_chip *chip = mtd_to_nand(mtd); |
d699ed25 | 1649 | struct gpmi_nand_data *this = nand_get_controller_data(chip); |
5a0edb25 | 1650 | int ret = 0; |
10a2bcae HS |
1651 | uint8_t *block_mark; |
1652 | int column, page, status, chipnr; | |
1653 | ||
5a0edb25 BN |
1654 | chipnr = (int)(ofs >> chip->chip_shift); |
1655 | chip->select_chip(mtd, chipnr); | |
10a2bcae | 1656 | |
2a500afe | 1657 | column = !GPMI_IS_MX23(this) ? mtd->writesize : 0; |
10a2bcae | 1658 | |
5a0edb25 BN |
1659 | /* Write the block mark. */ |
1660 | block_mark = this->data_buffer_dma; | |
1661 | block_mark[0] = 0; /* bad block marker */ | |
10a2bcae | 1662 | |
5a0edb25 BN |
1663 | /* Shift to get page */ |
1664 | page = (int)(ofs >> chip->page_shift); | |
10a2bcae | 1665 | |
5a0edb25 BN |
1666 | chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page); |
1667 | chip->write_buf(mtd, block_mark, 1); | |
1668 | chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); | |
10a2bcae | 1669 | |
5a0edb25 BN |
1670 | status = chip->waitfunc(mtd, chip); |
1671 | if (status & NAND_STATUS_FAIL) | |
1672 | ret = -EIO; | |
10a2bcae | 1673 | |
5a0edb25 | 1674 | chip->select_chip(mtd, -1); |
10a2bcae HS |
1675 | |
1676 | return ret; | |
1677 | } | |
1678 | ||
a78da287 | 1679 | static int nand_boot_set_geometry(struct gpmi_nand_data *this) |
10a2bcae HS |
1680 | { |
1681 | struct boot_rom_geometry *geometry = &this->rom_geometry; | |
1682 | ||
1683 | /* | |
1684 | * Set the boot block stride size. | |
1685 | * | |
1686 | * In principle, we should be reading this from the OTP bits, since | |
1687 | * that's where the ROM is going to get it. In fact, we don't have any | |
1688 | * way to read the OTP bits, so we go with the default and hope for the | |
1689 | * best. | |
1690 | */ | |
1691 | geometry->stride_size_in_pages = 64; | |
1692 | ||
1693 | /* | |
1694 | * Set the search area stride exponent. | |
1695 | * | |
1696 | * In principle, we should be reading this from the OTP bits, since | |
1697 | * that's where the ROM is going to get it. In fact, we don't have any | |
1698 | * way to read the OTP bits, so we go with the default and hope for the | |
1699 | * best. | |
1700 | */ | |
1701 | geometry->search_area_stride_exponent = 2; | |
1702 | return 0; | |
1703 | } | |
1704 | ||
1705 | static const char *fingerprint = "STMP"; | |
a78da287 | 1706 | static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) |
10a2bcae HS |
1707 | { |
1708 | struct boot_rom_geometry *rom_geo = &this->rom_geometry; | |
1709 | struct device *dev = this->dev; | |
10a2bcae | 1710 | struct nand_chip *chip = &this->nand; |
2a690b25 | 1711 | struct mtd_info *mtd = nand_to_mtd(chip); |
10a2bcae HS |
1712 | unsigned int search_area_size_in_strides; |
1713 | unsigned int stride; | |
1714 | unsigned int page; | |
10a2bcae HS |
1715 | uint8_t *buffer = chip->buffers->databuf; |
1716 | int saved_chip_number; | |
1717 | int found_an_ncb_fingerprint = false; | |
1718 | ||
1719 | /* Compute the number of strides in a search area. */ | |
1720 | search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent; | |
1721 | ||
1722 | saved_chip_number = this->current_chip; | |
1723 | chip->select_chip(mtd, 0); | |
1724 | ||
1725 | /* | |
1726 | * Loop through the first search area, looking for the NCB fingerprint. | |
1727 | */ | |
1728 | dev_dbg(dev, "Scanning for an NCB fingerprint...\n"); | |
1729 | ||
1730 | for (stride = 0; stride < search_area_size_in_strides; stride++) { | |
513d57e1 | 1731 | /* Compute the page addresses. */ |
10a2bcae | 1732 | page = stride * rom_geo->stride_size_in_pages; |
10a2bcae HS |
1733 | |
1734 | dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page); | |
1735 | ||
1736 | /* | |
1737 | * Read the NCB fingerprint. The fingerprint is four bytes long | |
1738 | * and starts in the 12th byte of the page. | |
1739 | */ | |
1740 | chip->cmdfunc(mtd, NAND_CMD_READ0, 12, page); | |
1741 | chip->read_buf(mtd, buffer, strlen(fingerprint)); | |
1742 | ||
1743 | /* Look for the fingerprint. */ | |
1744 | if (!memcmp(buffer, fingerprint, strlen(fingerprint))) { | |
1745 | found_an_ncb_fingerprint = true; | |
1746 | break; | |
1747 | } | |
1748 | ||
1749 | } | |
1750 | ||
1751 | chip->select_chip(mtd, saved_chip_number); | |
1752 | ||
1753 | if (found_an_ncb_fingerprint) | |
1754 | dev_dbg(dev, "\tFound a fingerprint\n"); | |
1755 | else | |
1756 | dev_dbg(dev, "\tNo fingerprint found\n"); | |
1757 | return found_an_ncb_fingerprint; | |
1758 | } | |
1759 | ||
1760 | /* Writes a transcription stamp. */ | |
a78da287 | 1761 | static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) |
10a2bcae HS |
1762 | { |
1763 | struct device *dev = this->dev; | |
1764 | struct boot_rom_geometry *rom_geo = &this->rom_geometry; | |
10a2bcae | 1765 | struct nand_chip *chip = &this->nand; |
2a690b25 | 1766 | struct mtd_info *mtd = nand_to_mtd(chip); |
10a2bcae HS |
1767 | unsigned int block_size_in_pages; |
1768 | unsigned int search_area_size_in_strides; | |
1769 | unsigned int search_area_size_in_pages; | |
1770 | unsigned int search_area_size_in_blocks; | |
1771 | unsigned int block; | |
1772 | unsigned int stride; | |
1773 | unsigned int page; | |
10a2bcae HS |
1774 | uint8_t *buffer = chip->buffers->databuf; |
1775 | int saved_chip_number; | |
1776 | int status; | |
1777 | ||
1778 | /* Compute the search area geometry. */ | |
1779 | block_size_in_pages = mtd->erasesize / mtd->writesize; | |
1780 | search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent; | |
1781 | search_area_size_in_pages = search_area_size_in_strides * | |
1782 | rom_geo->stride_size_in_pages; | |
1783 | search_area_size_in_blocks = | |
1784 | (search_area_size_in_pages + (block_size_in_pages - 1)) / | |
1785 | block_size_in_pages; | |
1786 | ||
1787 | dev_dbg(dev, "Search Area Geometry :\n"); | |
1788 | dev_dbg(dev, "\tin Blocks : %u\n", search_area_size_in_blocks); | |
1789 | dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides); | |
1790 | dev_dbg(dev, "\tin Pages : %u\n", search_area_size_in_pages); | |
1791 | ||
1792 | /* Select chip 0. */ | |
1793 | saved_chip_number = this->current_chip; | |
1794 | chip->select_chip(mtd, 0); | |
1795 | ||
1796 | /* Loop over blocks in the first search area, erasing them. */ | |
1797 | dev_dbg(dev, "Erasing the search area...\n"); | |
1798 | ||
1799 | for (block = 0; block < search_area_size_in_blocks; block++) { | |
1800 | /* Compute the page address. */ | |
1801 | page = block * block_size_in_pages; | |
1802 | ||
1803 | /* Erase this block. */ | |
1804 | dev_dbg(dev, "\tErasing block 0x%x\n", block); | |
1805 | chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); | |
1806 | chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); | |
1807 | ||
1808 | /* Wait for the erase to finish. */ | |
1809 | status = chip->waitfunc(mtd, chip); | |
1810 | if (status & NAND_STATUS_FAIL) | |
1811 | dev_err(dev, "[%s] Erase failed.\n", __func__); | |
1812 | } | |
1813 | ||
1814 | /* Write the NCB fingerprint into the page buffer. */ | |
1815 | memset(buffer, ~0, mtd->writesize); | |
10a2bcae HS |
1816 | memcpy(buffer + 12, fingerprint, strlen(fingerprint)); |
1817 | ||
1818 | /* Loop through the first search area, writing NCB fingerprints. */ | |
1819 | dev_dbg(dev, "Writing NCB fingerprints...\n"); | |
1820 | for (stride = 0; stride < search_area_size_in_strides; stride++) { | |
513d57e1 | 1821 | /* Compute the page addresses. */ |
10a2bcae | 1822 | page = stride * rom_geo->stride_size_in_pages; |
10a2bcae HS |
1823 | |
1824 | /* Write the first page of the current stride. */ | |
1825 | dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page); | |
1826 | chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); | |
45aaeff9 | 1827 | chip->ecc.write_page_raw(mtd, chip, buffer, 0, page); |
10a2bcae HS |
1828 | chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); |
1829 | ||
1830 | /* Wait for the write to finish. */ | |
1831 | status = chip->waitfunc(mtd, chip); | |
1832 | if (status & NAND_STATUS_FAIL) | |
1833 | dev_err(dev, "[%s] Write failed.\n", __func__); | |
1834 | } | |
1835 | ||
1836 | /* Deselect chip 0. */ | |
1837 | chip->select_chip(mtd, saved_chip_number); | |
1838 | return 0; | |
1839 | } | |
1840 | ||
a78da287 | 1841 | static int mx23_boot_init(struct gpmi_nand_data *this) |
10a2bcae HS |
1842 | { |
1843 | struct device *dev = this->dev; | |
1844 | struct nand_chip *chip = &this->nand; | |
2a690b25 | 1845 | struct mtd_info *mtd = nand_to_mtd(chip); |
10a2bcae HS |
1846 | unsigned int block_count; |
1847 | unsigned int block; | |
1848 | int chipnr; | |
1849 | int page; | |
1850 | loff_t byte; | |
1851 | uint8_t block_mark; | |
1852 | int ret = 0; | |
1853 | ||
1854 | /* | |
1855 | * If control arrives here, we can't use block mark swapping, which | |
1856 | * means we're forced to use transcription. First, scan for the | |
1857 | * transcription stamp. If we find it, then we don't have to do | |
1858 | * anything -- the block marks are already transcribed. | |
1859 | */ | |
1860 | if (mx23_check_transcription_stamp(this)) | |
1861 | return 0; | |
1862 | ||
1863 | /* | |
1864 | * If control arrives here, we couldn't find a transcription stamp, so | |
1865 | * so we presume the block marks are in the conventional location. | |
1866 | */ | |
1867 | dev_dbg(dev, "Transcribing bad block marks...\n"); | |
1868 | ||
1869 | /* Compute the number of blocks in the entire medium. */ | |
1870 | block_count = chip->chipsize >> chip->phys_erase_shift; | |
1871 | ||
1872 | /* | |
1873 | * Loop over all the blocks in the medium, transcribing block marks as | |
1874 | * we go. | |
1875 | */ | |
1876 | for (block = 0; block < block_count; block++) { | |
1877 | /* | |
1878 | * Compute the chip, page and byte addresses for this block's | |
1879 | * conventional mark. | |
1880 | */ | |
1881 | chipnr = block >> (chip->chip_shift - chip->phys_erase_shift); | |
1882 | page = block << (chip->phys_erase_shift - chip->page_shift); | |
1883 | byte = block << chip->phys_erase_shift; | |
1884 | ||
1885 | /* Send the command to read the conventional block mark. */ | |
1886 | chip->select_chip(mtd, chipnr); | |
1887 | chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page); | |
1888 | block_mark = chip->read_byte(mtd); | |
1889 | chip->select_chip(mtd, -1); | |
1890 | ||
1891 | /* | |
1892 | * Check if the block is marked bad. If so, we need to mark it | |
1893 | * again, but this time the result will be a mark in the | |
1894 | * location where we transcribe block marks. | |
1895 | */ | |
1896 | if (block_mark != 0xff) { | |
1897 | dev_dbg(dev, "Transcribing mark in block %u\n", block); | |
1898 | ret = chip->block_markbad(mtd, byte); | |
1899 | if (ret) | |
d8c0372b LW |
1900 | dev_err(dev, |
1901 | "Failed to mark block bad with ret %d\n", | |
1902 | ret); | |
10a2bcae HS |
1903 | } |
1904 | } | |
1905 | ||
1906 | /* Write the stamp that indicates we've transcribed the block marks. */ | |
1907 | mx23_write_transcription_stamp(this); | |
1908 | return 0; | |
1909 | } | |
1910 | ||
a78da287 | 1911 | static int nand_boot_init(struct gpmi_nand_data *this) |
10a2bcae HS |
1912 | { |
1913 | nand_boot_set_geometry(this); | |
1914 | ||
1915 | /* This is ROM arch-specific initilization before the BBT scanning. */ | |
1916 | if (GPMI_IS_MX23(this)) | |
1917 | return mx23_boot_init(this); | |
1918 | return 0; | |
1919 | } | |
1920 | ||
a78da287 | 1921 | static int gpmi_set_geometry(struct gpmi_nand_data *this) |
10a2bcae HS |
1922 | { |
1923 | int ret; | |
1924 | ||
1925 | /* Free the temporary DMA memory for reading ID. */ | |
1926 | gpmi_free_dma_buffer(this); | |
1927 | ||
1928 | /* Set up the NFC geometry which is used by BCH. */ | |
1929 | ret = bch_set_geometry(this); | |
1930 | if (ret) { | |
da40c16a | 1931 | dev_err(this->dev, "Error setting BCH geometry : %d\n", ret); |
10a2bcae HS |
1932 | return ret; |
1933 | } | |
1934 | ||
1935 | /* Alloc the new DMA buffers according to the pagesize and oobsize */ | |
1936 | return gpmi_alloc_dma_buffer(this); | |
1937 | } | |
1938 | ||
ccce4177 | 1939 | static void gpmi_nand_exit(struct gpmi_nand_data *this) |
f720e7ce | 1940 | { |
2a690b25 | 1941 | nand_release(nand_to_mtd(&this->nand)); |
f720e7ce HS |
1942 | gpmi_free_dma_buffer(this); |
1943 | } | |
1944 | ||
1945 | static int gpmi_init_last(struct gpmi_nand_data *this) | |
10a2bcae | 1946 | { |
2a690b25 | 1947 | struct nand_chip *chip = &this->nand; |
3f158e47 | 1948 | struct mtd_info *mtd = nand_to_mtd(chip); |
f720e7ce HS |
1949 | struct nand_ecc_ctrl *ecc = &chip->ecc; |
1950 | struct bch_geometry *bch_geo = &this->bch_geometry; | |
10a2bcae HS |
1951 | int ret; |
1952 | ||
d7364a27 HS |
1953 | /* Set up the medium geometry */ |
1954 | ret = gpmi_set_geometry(this); | |
10a2bcae HS |
1955 | if (ret) |
1956 | return ret; | |
1957 | ||
f720e7ce HS |
1958 | /* Init the nand_ecc_ctrl{} */ |
1959 | ecc->read_page = gpmi_ecc_read_page; | |
1960 | ecc->write_page = gpmi_ecc_write_page; | |
1961 | ecc->read_oob = gpmi_ecc_read_oob; | |
1962 | ecc->write_oob = gpmi_ecc_write_oob; | |
da3bc42c BB |
1963 | ecc->read_page_raw = gpmi_ecc_read_page_raw; |
1964 | ecc->write_page_raw = gpmi_ecc_write_page_raw; | |
7ca94e07 BB |
1965 | ecc->read_oob_raw = gpmi_ecc_read_oob_raw; |
1966 | ecc->write_oob_raw = gpmi_ecc_write_oob_raw; | |
f720e7ce HS |
1967 | ecc->mode = NAND_ECC_HW; |
1968 | ecc->size = bch_geo->ecc_chunk_size; | |
1969 | ecc->strength = bch_geo->ecc_strength; | |
3f158e47 | 1970 | mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops); |
f720e7ce | 1971 | |
b8e2931d HS |
1972 | /* |
1973 | * We only enable the subpage read when: | |
1974 | * (1) the chip is imx6, and | |
1975 | * (2) the size of the ECC parity is byte aligned. | |
1976 | */ | |
91f5498e | 1977 | if (GPMI_IS_MX6(this) && |
b8e2931d HS |
1978 | ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) { |
1979 | ecc->read_subpage = gpmi_ecc_read_subpage; | |
1980 | chip->options |= NAND_SUBPAGE_READ; | |
1981 | } | |
1982 | ||
995fbbf5 HS |
1983 | /* |
1984 | * Can we enable the extra features? such as EDO or Sync mode. | |
1985 | * | |
1986 | * We do not check the return value now. That's means if we fail in | |
1987 | * enable the extra features, we still can run in the normal way. | |
1988 | */ | |
1989 | gpmi_extra_init(this); | |
1990 | ||
f720e7ce | 1991 | return 0; |
10a2bcae HS |
1992 | } |
1993 | ||
ccce4177 | 1994 | static int gpmi_nand_init(struct gpmi_nand_data *this) |
10a2bcae | 1995 | { |
10a2bcae | 1996 | struct nand_chip *chip = &this->nand; |
2a690b25 | 1997 | struct mtd_info *mtd = nand_to_mtd(chip); |
10a2bcae HS |
1998 | int ret; |
1999 | ||
2000 | /* init current chip */ | |
2001 | this->current_chip = -1; | |
2002 | ||
2003 | /* init the MTD data structures */ | |
10a2bcae | 2004 | mtd->name = "gpmi-nand"; |
4dc67b1d | 2005 | mtd->dev.parent = this->dev; |
10a2bcae HS |
2006 | |
2007 | /* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */ | |
d699ed25 | 2008 | nand_set_controller_data(chip, this); |
a61ae81a | 2009 | nand_set_flash_node(chip, this->pdev->dev.of_node); |
10a2bcae HS |
2010 | chip->select_chip = gpmi_select_chip; |
2011 | chip->cmd_ctrl = gpmi_cmd_ctrl; | |
2012 | chip->dev_ready = gpmi_dev_ready; | |
2013 | chip->read_byte = gpmi_read_byte; | |
2014 | chip->read_buf = gpmi_read_buf; | |
2015 | chip->write_buf = gpmi_write_buf; | |
10a2bcae HS |
2016 | chip->badblock_pattern = &gpmi_bbt_descr; |
2017 | chip->block_markbad = gpmi_block_markbad; | |
2018 | chip->options |= NAND_NO_SUBPAGE_WRITE; | |
2a500afe LW |
2019 | |
2020 | /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */ | |
2021 | this->swap_block_mark = !GPMI_IS_MX23(this); | |
2022 | ||
f720e7ce HS |
2023 | /* |
2024 | * Allocate a temporary DMA buffer for reading ID in the | |
2025 | * nand_scan_ident(). | |
2026 | */ | |
10a2bcae HS |
2027 | this->bch_geometry.payload_size = 1024; |
2028 | this->bch_geometry.auxiliary_size = 128; | |
2029 | ret = gpmi_alloc_dma_buffer(this); | |
2030 | if (ret) | |
2031 | goto err_out; | |
2032 | ||
91f5498e | 2033 | ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL); |
f720e7ce HS |
2034 | if (ret) |
2035 | goto err_out; | |
2036 | ||
f05f6a10 BB |
2037 | if (chip->bbt_options & NAND_BBT_USE_FLASH) { |
2038 | chip->bbt_options |= NAND_BBT_NO_OOB; | |
2039 | ||
2040 | if (of_property_read_bool(this->dev->of_node, | |
2041 | "fsl,no-blockmark-swap")) | |
2042 | this->swap_block_mark = false; | |
2043 | } | |
2044 | dev_dbg(this->dev, "Blockmark swapping %sabled\n", | |
2045 | this->swap_block_mark ? "en" : "dis"); | |
2046 | ||
f720e7ce HS |
2047 | ret = gpmi_init_last(this); |
2048 | if (ret) | |
2049 | goto err_out; | |
2050 | ||
885d71e5 | 2051 | chip->options |= NAND_SKIP_BBTSCAN; |
f720e7ce HS |
2052 | ret = nand_scan_tail(mtd); |
2053 | if (ret) | |
10a2bcae | 2054 | goto err_out; |
10a2bcae | 2055 | |
885d71e5 HS |
2056 | ret = nand_boot_init(this); |
2057 | if (ret) | |
4d02423e | 2058 | goto err_nand_cleanup; |
899b834a FE |
2059 | ret = chip->scan_bbt(mtd); |
2060 | if (ret) | |
4d02423e | 2061 | goto err_nand_cleanup; |
885d71e5 | 2062 | |
a61ae81a | 2063 | ret = mtd_device_register(mtd, NULL, 0); |
10a2bcae | 2064 | if (ret) |
4d02423e | 2065 | goto err_nand_cleanup; |
10a2bcae HS |
2066 | return 0; |
2067 | ||
4d02423e BB |
2068 | err_nand_cleanup: |
2069 | nand_cleanup(chip); | |
10a2bcae | 2070 | err_out: |
4d02423e | 2071 | gpmi_free_dma_buffer(this); |
10a2bcae HS |
2072 | return ret; |
2073 | } | |
2074 | ||
e10db1f0 HS |
2075 | static const struct of_device_id gpmi_nand_id_table[] = { |
2076 | { | |
2077 | .compatible = "fsl,imx23-gpmi-nand", | |
6a760966 | 2078 | .data = &gpmi_devdata_imx23, |
e10db1f0 HS |
2079 | }, { |
2080 | .compatible = "fsl,imx28-gpmi-nand", | |
6a760966 | 2081 | .data = &gpmi_devdata_imx28, |
9013bb40 HS |
2082 | }, { |
2083 | .compatible = "fsl,imx6q-gpmi-nand", | |
6a760966 | 2084 | .data = &gpmi_devdata_imx6q, |
91f5498e HS |
2085 | }, { |
2086 | .compatible = "fsl,imx6sx-gpmi-nand", | |
6a760966 | 2087 | .data = &gpmi_devdata_imx6sx, |
b4af694f SA |
2088 | }, { |
2089 | .compatible = "fsl,imx7d-gpmi-nand", | |
2090 | .data = &gpmi_devdata_imx7d, | |
e10db1f0 HS |
2091 | }, {} |
2092 | }; | |
2093 | MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); | |
2094 | ||
06f25510 | 2095 | static int gpmi_nand_probe(struct platform_device *pdev) |
10a2bcae | 2096 | { |
10a2bcae | 2097 | struct gpmi_nand_data *this; |
e10db1f0 | 2098 | const struct of_device_id *of_id; |
10a2bcae HS |
2099 | int ret; |
2100 | ||
6189cccb HS |
2101 | this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL); |
2102 | if (!this) | |
2103 | return -ENOMEM; | |
2104 | ||
e10db1f0 HS |
2105 | of_id = of_match_device(gpmi_nand_id_table, &pdev->dev); |
2106 | if (of_id) { | |
6189cccb | 2107 | this->devdata = of_id->data; |
e10db1f0 | 2108 | } else { |
da40c16a | 2109 | dev_err(&pdev->dev, "Failed to find the right device id.\n"); |
52a073bd | 2110 | return -ENODEV; |
e10db1f0 HS |
2111 | } |
2112 | ||
10a2bcae HS |
2113 | platform_set_drvdata(pdev, this); |
2114 | this->pdev = pdev; | |
2115 | this->dev = &pdev->dev; | |
10a2bcae HS |
2116 | |
2117 | ret = acquire_resources(this); | |
2118 | if (ret) | |
2119 | goto exit_acquire_resources; | |
2120 | ||
2121 | ret = init_hardware(this); | |
2122 | if (ret) | |
2123 | goto exit_nfc_init; | |
2124 | ||
ccce4177 | 2125 | ret = gpmi_nand_init(this); |
10a2bcae HS |
2126 | if (ret) |
2127 | goto exit_nfc_init; | |
2128 | ||
490e280a FE |
2129 | dev_info(this->dev, "driver registered.\n"); |
2130 | ||
10a2bcae HS |
2131 | return 0; |
2132 | ||
2133 | exit_nfc_init: | |
2134 | release_resources(this); | |
10a2bcae | 2135 | exit_acquire_resources: |
490e280a | 2136 | |
10a2bcae HS |
2137 | return ret; |
2138 | } | |
2139 | ||
810b7e06 | 2140 | static int gpmi_nand_remove(struct platform_device *pdev) |
10a2bcae HS |
2141 | { |
2142 | struct gpmi_nand_data *this = platform_get_drvdata(pdev); | |
2143 | ||
ccce4177 | 2144 | gpmi_nand_exit(this); |
10a2bcae | 2145 | release_resources(this); |
10a2bcae HS |
2146 | return 0; |
2147 | } | |
2148 | ||
026918e7 HS |
2149 | #ifdef CONFIG_PM_SLEEP |
2150 | static int gpmi_pm_suspend(struct device *dev) | |
2151 | { | |
2152 | struct gpmi_nand_data *this = dev_get_drvdata(dev); | |
2153 | ||
2154 | release_dma_channels(this); | |
2155 | return 0; | |
2156 | } | |
2157 | ||
2158 | static int gpmi_pm_resume(struct device *dev) | |
2159 | { | |
2160 | struct gpmi_nand_data *this = dev_get_drvdata(dev); | |
2161 | int ret; | |
2162 | ||
2163 | ret = acquire_dma_channels(this); | |
2164 | if (ret < 0) | |
2165 | return ret; | |
2166 | ||
2167 | /* re-init the GPMI registers */ | |
2168 | this->flags &= ~GPMI_TIMING_INIT_OK; | |
2169 | ret = gpmi_init(this); | |
2170 | if (ret) { | |
2171 | dev_err(this->dev, "Error setting GPMI : %d\n", ret); | |
2172 | return ret; | |
2173 | } | |
2174 | ||
2175 | /* re-init the BCH registers */ | |
2176 | ret = bch_set_geometry(this); | |
2177 | if (ret) { | |
2178 | dev_err(this->dev, "Error setting BCH : %d\n", ret); | |
2179 | return ret; | |
2180 | } | |
2181 | ||
2182 | /* re-init others */ | |
2183 | gpmi_extra_init(this); | |
2184 | ||
2185 | return 0; | |
2186 | } | |
2187 | #endif /* CONFIG_PM_SLEEP */ | |
2188 | ||
2189 | static const struct dev_pm_ops gpmi_pm_ops = { | |
2190 | SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume) | |
2191 | }; | |
2192 | ||
10a2bcae HS |
2193 | static struct platform_driver gpmi_nand_driver = { |
2194 | .driver = { | |
2195 | .name = "gpmi-nand", | |
026918e7 | 2196 | .pm = &gpmi_pm_ops, |
e10db1f0 | 2197 | .of_match_table = gpmi_nand_id_table, |
10a2bcae HS |
2198 | }, |
2199 | .probe = gpmi_nand_probe, | |
5153b88c | 2200 | .remove = gpmi_nand_remove, |
10a2bcae | 2201 | }; |
490e280a | 2202 | module_platform_driver(gpmi_nand_driver); |
10a2bcae HS |
2203 | |
2204 | MODULE_AUTHOR("Freescale Semiconductor, Inc."); | |
2205 | MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver"); | |
2206 | MODULE_LICENSE("GPL"); |