projects / linux-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge remote-tracking branches 'asoc/topic/wm8753', 'asoc/topic/wm8770', 'asoc/topic...
[linux-block.git] / drivers / mmc / host / bcm2835.c
CommitLineData
660fc733
EA		 1/*
2 * bcm2835 sdhost driver.
3 *
4 * The 2835 has two SD controllers: The Arasan sdhci controller
5 * (supported by the iproc driver) and a custom sdhost controller
6 * (supported by this driver).
7 *
8 * The sdhci controller supports both sdcard and sdio. The sdhost
9 * controller supports the sdcard only, but has better performance.
10 * Also note that the rpi3 has sdio wifi, so driving the sdcard with
11 * the sdhost controller allows to use the sdhci controller for wifi
12 * support.
13 *
14 * The configuration is done by devicetree via pin muxing. Both
15 * SD controller are available on the same pins (2 pin groups = pin 22
16 * to 27 + pin 48 to 53). So it's possible to use both SD controllers
17 * at the same time with different pin groups.
18 *
19 * Author: Phil Elwell <phil@raspberrypi.org>
20 * Copyright (C) 2015-2016 Raspberry Pi (Trading) Ltd.
21 *
22 * Based on
23 * mmc-bcm2835.c by Gellert Weisz
24 * which is, in turn, based on
25 * sdhci-bcm2708.c by Broadcom
26 * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko
27 * sdhci.c and sdhci-pci.c by Pierre Ossman
28 *
29 * This program is free software; you can redistribute it and/or modify it
30 * under the terms and conditions of the GNU General Public License,
31 * version 2, as published by the Free Software Foundation.
32 *
33 * This program is distributed in the hope it will be useful, but WITHOUT
34 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
35 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
36 * more details.
37 *
38 * You should have received a copy of the GNU General Public License
39 * along with this program. If not, see <http://www.gnu.org/licenses/>.
40 */
41#include <linux/clk.h>
42#include <linux/delay.h>
43#include <linux/device.h>
44#include <linux/dmaengine.h>
45#include <linux/dma-mapping.h>
46#include <linux/err.h>
47#include <linux/highmem.h>
48#include <linux/interrupt.h>
49#include <linux/io.h>
50#include <linux/iopoll.h>
51#include <linux/module.h>
52#include <linux/of_address.h>
53#include <linux/of_irq.h>
54#include <linux/platform_device.h>
55#include <linux/scatterlist.h>
56#include <linux/time.h>
57#include <linux/workqueue.h>
58
59#include <linux/mmc/host.h>
60#include <linux/mmc/mmc.h>
61#include <linux/mmc/sd.h>
62
63#define SDCMD 0x00 /* Command to SD card - 16 R/W */
64#define SDARG 0x04 /* Argument to SD card - 32 R/W */
65#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */
66#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */
67#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */
68#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */
69#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */
70#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */
71#define SDHSTS 0x20 /* SD host status - 11 R/W */
72#define SDVDD 0x30 /* SD card power control - 1 R/W */
73#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */
74#define SDHCFG 0x38 /* Host configuration - 2 R/W */
75#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */
76#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */
77#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */
78
79#define SDCMD_NEW_FLAG 0x8000
80#define SDCMD_FAIL_FLAG 0x4000
81#define SDCMD_BUSYWAIT 0x800
82#define SDCMD_NO_RESPONSE 0x400
83#define SDCMD_LONG_RESPONSE 0x200
84#define SDCMD_WRITE_CMD 0x80
85#define SDCMD_READ_CMD 0x40
86#define SDCMD_CMD_MASK 0x3f
87
88#define SDCDIV_MAX_CDIV 0x7ff
89
90#define SDHSTS_BUSY_IRPT 0x400
91#define SDHSTS_BLOCK_IRPT 0x200
92#define SDHSTS_SDIO_IRPT 0x100
93#define SDHSTS_REW_TIME_OUT 0x80
94#define SDHSTS_CMD_TIME_OUT 0x40
95#define SDHSTS_CRC16_ERROR 0x20
96#define SDHSTS_CRC7_ERROR 0x10
97#define SDHSTS_FIFO_ERROR 0x08
98/* Reserved */
99/* Reserved */
100#define SDHSTS_DATA_FLAG 0x01
101
102#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR | \
103 SDHSTS_CRC16_ERROR | \
104 SDHSTS_REW_TIME_OUT | \
105 SDHSTS_FIFO_ERROR)
106
107#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT | \
108 SDHSTS_TRANSFER_ERROR_MASK)
109
110#define SDHCFG_BUSY_IRPT_EN BIT(10)
111#define SDHCFG_BLOCK_IRPT_EN BIT(8)
112#define SDHCFG_SDIO_IRPT_EN BIT(5)
113#define SDHCFG_DATA_IRPT_EN BIT(4)
114#define SDHCFG_SLOW_CARD BIT(3)
115#define SDHCFG_WIDE_EXT_BUS BIT(2)
116#define SDHCFG_WIDE_INT_BUS BIT(1)
117#define SDHCFG_REL_CMD_LINE BIT(0)
118
119#define SDVDD_POWER_OFF 0
120#define SDVDD_POWER_ON 1
121
122#define SDEDM_FORCE_DATA_MODE BIT(19)
123#define SDEDM_CLOCK_PULSE BIT(20)
124#define SDEDM_BYPASS BIT(21)
125
126#define SDEDM_WRITE_THRESHOLD_SHIFT 9
127#define SDEDM_READ_THRESHOLD_SHIFT 14
128#define SDEDM_THRESHOLD_MASK 0x1f
129
130#define SDEDM_FSM_MASK 0xf
131#define SDEDM_FSM_IDENTMODE 0x0
132#define SDEDM_FSM_DATAMODE 0x1
133#define SDEDM_FSM_READDATA 0x2
134#define SDEDM_FSM_WRITEDATA 0x3
135#define SDEDM_FSM_READWAIT 0x4
136#define SDEDM_FSM_READCRC 0x5
137#define SDEDM_FSM_WRITECRC 0x6
138#define SDEDM_FSM_WRITEWAIT1 0x7
139#define SDEDM_FSM_POWERDOWN 0x8
140#define SDEDM_FSM_POWERUP 0x9
141#define SDEDM_FSM_WRITESTART1 0xa
142#define SDEDM_FSM_WRITESTART2 0xb
143#define SDEDM_FSM_GENPULSES 0xc
144#define SDEDM_FSM_WRITEWAIT2 0xd
145#define SDEDM_FSM_STARTPOWDOWN 0xf
146
147#define SDDATA_FIFO_WORDS 16
148
149#define FIFO_READ_THRESHOLD 4
150#define FIFO_WRITE_THRESHOLD 4
151#define SDDATA_FIFO_PIO_BURST 8
152
153#define PIO_THRESHOLD 1 /* Maximum block count for PIO (0 = always DMA) */
154
155struct bcm2835_host {
156 spinlock_t lock;
157 struct mutex mutex;
158
159 void __iomem *ioaddr;
160 u32 phys_addr;
161
162 struct mmc_host *mmc;
163 struct platform_device *pdev;
164
165 int clock; /* Current clock speed */
166 unsigned int max_clk; /* Max possible freq */
167 struct work_struct dma_work;
168 struct delayed_work timeout_work; /* Timer for timeouts */
169 struct sg_mapping_iter sg_miter; /* SG state for PIO */
170 unsigned int blocks; /* remaining PIO blocks */
171 int irq; /* Device IRQ */
172
173 u32 ns_per_fifo_word;
174
175 /* cached registers */
176 u32 hcfg;
177 u32 cdiv;
178
179 struct mmc_request *mrq; /* Current request */
180 struct mmc_command *cmd; /* Current command */
181 struct mmc_data *data; /* Current data request */
182 bool data_complete:1;/* Data finished before cmd */
183 bool use_busy:1; /* Wait for busy interrupt */
184 bool use_sbc:1; /* Send CMD23 */
185
186 /* for threaded irq handler */
187 bool irq_block;
188 bool irq_busy;
189 bool irq_data;
190
191 /* DMA part */
192 struct dma_chan *dma_chan_rxtx;
193 struct dma_chan *dma_chan;
194 struct dma_slave_config dma_cfg_rx;
195 struct dma_slave_config dma_cfg_tx;
196 struct dma_async_tx_descriptor *dma_desc;
197 u32 dma_dir;
198 u32 drain_words;
199 struct page *drain_page;
200 u32 drain_offset;
201 bool use_dma;
202};
203
204static void bcm2835_dumpcmd(struct bcm2835_host *host, struct mmc_command *cmd,
205 const char *label)
206{
207 struct device *dev = &host->pdev->dev;
208
209 if (!cmd)
210 return;
211
212 dev_dbg(dev, "%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n",
213 (cmd == host->cmd) ? '>' : ' ',
214 label, cmd->opcode, cmd->arg, cmd->flags,
215 cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3],
216 cmd->error);
217}
218
219static void bcm2835_dumpregs(struct bcm2835_host *host)
220{
221 struct mmc_request *mrq = host->mrq;
222 struct device *dev = &host->pdev->dev;
223
224 if (mrq) {
225 bcm2835_dumpcmd(host, mrq->sbc, "sbc");
226 bcm2835_dumpcmd(host, mrq->cmd, "cmd");
227 if (mrq->data) {
228 dev_dbg(dev, "data blocks %x blksz %x - err %d\n",
229 mrq->data->blocks,
230 mrq->data->blksz,
231 mrq->data->error);
232 }
233 bcm2835_dumpcmd(host, mrq->stop, "stop");
234 }
235
236 dev_dbg(dev, "=========== REGISTER DUMP ===========\n");
237 dev_dbg(dev, "SDCMD 0x%08x\n", readl(host->ioaddr + SDCMD));
238 dev_dbg(dev, "SDARG 0x%08x\n", readl(host->ioaddr + SDARG));
239 dev_dbg(dev, "SDTOUT 0x%08x\n", readl(host->ioaddr + SDTOUT));
240 dev_dbg(dev, "SDCDIV 0x%08x\n", readl(host->ioaddr + SDCDIV));
241 dev_dbg(dev, "SDRSP0 0x%08x\n", readl(host->ioaddr + SDRSP0));
242 dev_dbg(dev, "SDRSP1 0x%08x\n", readl(host->ioaddr + SDRSP1));
243 dev_dbg(dev, "SDRSP2 0x%08x\n", readl(host->ioaddr + SDRSP2));
244 dev_dbg(dev, "SDRSP3 0x%08x\n", readl(host->ioaddr + SDRSP3));
245 dev_dbg(dev, "SDHSTS 0x%08x\n", readl(host->ioaddr + SDHSTS));
246 dev_dbg(dev, "SDVDD 0x%08x\n", readl(host->ioaddr + SDVDD));
247 dev_dbg(dev, "SDEDM 0x%08x\n", readl(host->ioaddr + SDEDM));
248 dev_dbg(dev, "SDHCFG 0x%08x\n", readl(host->ioaddr + SDHCFG));
249 dev_dbg(dev, "SDHBCT 0x%08x\n", readl(host->ioaddr + SDHBCT));
250 dev_dbg(dev, "SDHBLC 0x%08x\n", readl(host->ioaddr + SDHBLC));
251 dev_dbg(dev, "===========================================\n");
252}
253
254static void bcm2835_reset_internal(struct bcm2835_host *host)
255{
256 u32 temp;
257
258 writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD);
259 writel(0, host->ioaddr + SDCMD);
260 writel(0, host->ioaddr + SDARG);
261 writel(0xf00000, host->ioaddr + SDTOUT);
262 writel(0, host->ioaddr + SDCDIV);
263 writel(0x7f8, host->ioaddr + SDHSTS); /* Write 1s to clear */
264 writel(0, host->ioaddr + SDHCFG);
265 writel(0, host->ioaddr + SDHBCT);
266 writel(0, host->ioaddr + SDHBLC);
267
268 /* Limit fifo usage due to silicon bug */
269 temp = readl(host->ioaddr + SDEDM);
270 temp &= ~((SDEDM_THRESHOLD_MASK << SDEDM_READ_THRESHOLD_SHIFT) |
271 (SDEDM_THRESHOLD_MASK << SDEDM_WRITE_THRESHOLD_SHIFT));
272 temp |= (FIFO_READ_THRESHOLD << SDEDM_READ_THRESHOLD_SHIFT) |
273 (FIFO_WRITE_THRESHOLD << SDEDM_WRITE_THRESHOLD_SHIFT);
274 writel(temp, host->ioaddr + SDEDM);
275 msleep(20);
276 writel(SDVDD_POWER_ON, host->ioaddr + SDVDD);
277 msleep(20);
278 host->clock = 0;
279 writel(host->hcfg, host->ioaddr + SDHCFG);
280 writel(host->cdiv, host->ioaddr + SDCDIV);
281}
282
283static void bcm2835_reset(struct mmc_host *mmc)
284{
285 struct bcm2835_host *host = mmc_priv(mmc);
286
287 if (host->dma_chan)
288 dmaengine_terminate_sync(host->dma_chan);
289 bcm2835_reset_internal(host);
290}
291
292static void bcm2835_finish_command(struct bcm2835_host *host);
293
294static void bcm2835_wait_transfer_complete(struct bcm2835_host *host)
295{
296 int timediff;
297 u32 alternate_idle;
298
299 alternate_idle = (host->mrq->data->flags & MMC_DATA_READ) ?
300 SDEDM_FSM_READWAIT : SDEDM_FSM_WRITESTART1;
301
302 timediff = 0;
303
304 while (1) {
305 u32 edm, fsm;
306
307 edm = readl(host->ioaddr + SDEDM);
308 fsm = edm & SDEDM_FSM_MASK;
309
310 if ((fsm == SDEDM_FSM_IDENTMODE) ||
311 (fsm == SDEDM_FSM_DATAMODE))
312 break;
313 if (fsm == alternate_idle) {
314 writel(edm | SDEDM_FORCE_DATA_MODE,
315 host->ioaddr + SDEDM);
316 break;
317 }
318
319 timediff++;
320 if (timediff == 100000) {
321 dev_err(&host->pdev->dev,
322 "wait_transfer_complete - still waiting after %d retries\n",
323 timediff);
324 bcm2835_dumpregs(host);
325 host->mrq->data->error = -ETIMEDOUT;
326 return;
327 }
328 cpu_relax();
329 }
330}
331
332static void bcm2835_dma_complete(void *param)
333{
334 struct bcm2835_host *host = param;
335
336 schedule_work(&host->dma_work);
337}
338
339static void bcm2835_transfer_block_pio(struct bcm2835_host *host, bool is_read)
340{
341 unsigned long flags;
342 size_t blksize;
343 unsigned long wait_max;
344
345 blksize = host->data->blksz;
346
347 wait_max = jiffies + msecs_to_jiffies(500);
348
349 local_irq_save(flags);
350
351 while (blksize) {
352 int copy_words;
353 u32 hsts = 0;
354 size_t len;
355 u32 *buf;
356
357 if (!sg_miter_next(&host->sg_miter)) {
358 host->data->error = -EINVAL;
359 break;
360 }
361
362 len = min(host->sg_miter.length, blksize);
363 if (len % 4) {
364 host->data->error = -EINVAL;
365 break;
366 }
367
368 blksize -= len;
369 host->sg_miter.consumed = len;
370
371 buf = (u32 *)host->sg_miter.addr;
372
373 copy_words = len / 4;
374
375 while (copy_words) {
376 int burst_words, words;
377 u32 edm;
378
379 burst_words = min(SDDATA_FIFO_PIO_BURST, copy_words);
380 edm = readl(host->ioaddr + SDEDM);
381 if (is_read)
382 words = ((edm >> 4) & 0x1f);
383 else
384 words = SDDATA_FIFO_WORDS - ((edm >> 4) & 0x1f);
385
386 if (words < burst_words) {
387 int fsm_state = (edm & SDEDM_FSM_MASK);
388 struct device *dev = &host->pdev->dev;
389
390 if ((is_read &&
391 (fsm_state != SDEDM_FSM_READDATA &&
392 fsm_state != SDEDM_FSM_READWAIT &&
393 fsm_state != SDEDM_FSM_READCRC)) ||
394 (!is_read &&
395 (fsm_state != SDEDM_FSM_WRITEDATA &&
396 fsm_state != SDEDM_FSM_WRITESTART1 &&
397 fsm_state != SDEDM_FSM_WRITESTART2))) {
398 hsts = readl(host->ioaddr + SDHSTS);
399 dev_err(dev, "fsm %x, hsts %08x\n",
400 fsm_state, hsts);
401 if (hsts & SDHSTS_ERROR_MASK)
402 break;
403 }
404
405 if (time_after(jiffies, wait_max)) {
406 dev_err(dev, "PIO %s timeout - EDM %08x\n",
407 is_read ? "read" : "write",
408 edm);
409 hsts = SDHSTS_REW_TIME_OUT;
410 break;
411 }
412 ndelay((burst_words - words) *
413 host->ns_per_fifo_word);
414 continue;
415 } else if (words > copy_words) {
416 words = copy_words;
417 }
418
419 copy_words -= words;
420
421 while (words) {
422 if (is_read)
423 *(buf++) = readl(host->ioaddr + SDDATA);
424 else
425 writel(*(buf++), host->ioaddr + SDDATA);
426 words--;
427 }
428 }
429
430 if (hsts & SDHSTS_ERROR_MASK)
431 break;
432 }
433
434 sg_miter_stop(&host->sg_miter);
435
436 local_irq_restore(flags);
437}
438
439static void bcm2835_transfer_pio(struct bcm2835_host *host)
440{
441 struct device *dev = &host->pdev->dev;
442 u32 sdhsts;
443 bool is_read;
444
445 is_read = (host->data->flags & MMC_DATA_READ) != 0;
446 bcm2835_transfer_block_pio(host, is_read);
447
448 sdhsts = readl(host->ioaddr + SDHSTS);
449 if (sdhsts & (SDHSTS_CRC16_ERROR |
450 SDHSTS_CRC7_ERROR |
451 SDHSTS_FIFO_ERROR)) {
452 dev_err(dev, "%s transfer error - HSTS %08x\n",
453 is_read ? "read" : "write", sdhsts);
454 host->data->error = -EILSEQ;
455 } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT |
456 SDHSTS_REW_TIME_OUT))) {
457 dev_err(dev, "%s timeout error - HSTS %08x\n",
458 is_read ? "read" : "write", sdhsts);
459 host->data->error = -ETIMEDOUT;
460 }
461}
462
463static
464void bcm2835_prepare_dma(struct bcm2835_host *host, struct mmc_data *data)
465{
466 int len, dir_data, dir_slave;
467 struct dma_async_tx_descriptor *desc = NULL;
468 struct dma_chan *dma_chan;
469
470 dma_chan = host->dma_chan_rxtx;
471 if (data->flags & MMC_DATA_READ) {
472 dir_data = DMA_FROM_DEVICE;
473 dir_slave = DMA_DEV_TO_MEM;
474 } else {
475 dir_data = DMA_TO_DEVICE;
476 dir_slave = DMA_MEM_TO_DEV;
477 }
478
479 /* The block doesn't manage the FIFO DREQs properly for
480 * multi-block transfers, so don't attempt to DMA the final
481 * few words. Unfortunately this requires the final sg entry
482 * to be trimmed. N.B. This code demands that the overspill
483 * is contained in a single sg entry.
484 */
485
486 host->drain_words = 0;
487 if ((data->blocks > 1) && (dir_data == DMA_FROM_DEVICE)) {
488 struct scatterlist *sg;
489 u32 len;
490 int i;
491
492 len = min((u32)(FIFO_READ_THRESHOLD - 1) * 4,
493 (u32)data->blocks * data->blksz);
494
495 for_each_sg(data->sg, sg, data->sg_len, i) {
496 if (sg_is_last(sg)) {
497 WARN_ON(sg->length < len);
498 sg->length -= len;
499 host->drain_page = sg_page(sg);
500 host->drain_offset = sg->offset + sg->length;
501 }
502 }
503 host->drain_words = len / 4;
504 }
505
506 /* The parameters have already been validated, so this will not fail */
507 (void)dmaengine_slave_config(dma_chan,
508 (dir_data == DMA_FROM_DEVICE) ?
509 &host->dma_cfg_rx :
510 &host->dma_cfg_tx);
511
512 len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len,
513 dir_data);
514
515 if (len > 0) {
516 desc = dmaengine_prep_slave_sg(dma_chan, data->sg,
517 len, dir_slave,
518 DMA_PREP_INTERRUPT |
519 DMA_CTRL_ACK);
520 }
521
522 if (desc) {
523 desc->callback = bcm2835_dma_complete;
524 desc->callback_param = host;
525 host->dma_desc = desc;
526 host->dma_chan = dma_chan;
527 host->dma_dir = dir_data;
528 }
529}
530
531static void bcm2835_start_dma(struct bcm2835_host *host)
532{
533 dmaengine_submit(host->dma_desc);
534 dma_async_issue_pending(host->dma_chan);
535}
536
537static void bcm2835_set_transfer_irqs(struct bcm2835_host *host)
538{
539 u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN |
540 SDHCFG_BUSY_IRPT_EN;
541
542 if (host->dma_desc) {
543 host->hcfg = (host->hcfg & ~all_irqs) |
544 SDHCFG_BUSY_IRPT_EN;
545 } else {
546 host->hcfg = (host->hcfg & ~all_irqs) |
547 SDHCFG_DATA_IRPT_EN |
548 SDHCFG_BUSY_IRPT_EN;
549 }
550
551 writel(host->hcfg, host->ioaddr + SDHCFG);
552}
553
554static
555void bcm2835_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd)
556{
557 struct mmc_data *data = cmd->data;
558
559 WARN_ON(host->data);
560
561 host->data = data;
562 if (!data)
563 return;
564
565 host->data_complete = false;
566 host->data->bytes_xfered = 0;
567
568 if (!host->dma_desc) {
569 /* Use PIO */
570 int flags = SG_MITER_ATOMIC;
571
572 if (data->flags & MMC_DATA_READ)
573 flags |= SG_MITER_TO_SG;
574 else
575 flags |= SG_MITER_FROM_SG;
576 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
577 host->blocks = data->blocks;
578 }
579
580 bcm2835_set_transfer_irqs(host);
581
582 writel(data->blksz, host->ioaddr + SDHBCT);
583 writel(data->blocks, host->ioaddr + SDHBLC);
584}
585
586static u32 bcm2835_read_wait_sdcmd(struct bcm2835_host *host, u32 max_ms)
587{
588 struct device *dev = &host->pdev->dev;
589 u32 value;
590 int ret;
591
592 ret = readl_poll_timeout(host->ioaddr + SDCMD, value,
593 !(value & SDCMD_NEW_FLAG), 1, 10);
594 if (ret == -ETIMEDOUT)
595 /* if it takes a while make poll interval bigger */
596 ret = readl_poll_timeout(host->ioaddr + SDCMD, value,
597 !(value & SDCMD_NEW_FLAG),
598 10, max_ms * 1000);
599 if (ret == -ETIMEDOUT)
600 dev_err(dev, "%s: timeout (%d ms)\n", __func__, max_ms);
601
602 return value;
603}
604
605static void bcm2835_finish_request(struct bcm2835_host *host)
606{
607 struct dma_chan *terminate_chan = NULL;
608 struct mmc_request *mrq;
609
610 cancel_delayed_work(&host->timeout_work);
611
612 mrq = host->mrq;
613
614 host->mrq = NULL;
615 host->cmd = NULL;
616 host->data = NULL;
617
618 host->dma_desc = NULL;
619 terminate_chan = host->dma_chan;
620 host->dma_chan = NULL;
621
622 if (terminate_chan) {
623 int err = dmaengine_terminate_all(terminate_chan);
624
625 if (err)
626 dev_err(&host->pdev->dev,
627 "failed to terminate DMA (%d)\n", err);
628 }
629
630 mmc_request_done(host->mmc, mrq);
631}
632
633static
634bool bcm2835_send_command(struct bcm2835_host *host, struct mmc_command *cmd)
635{
636 struct device *dev = &host->pdev->dev;
637 u32 sdcmd, sdhsts;
638 unsigned long timeout;
639
640 WARN_ON(host->cmd);
641
642 sdcmd = bcm2835_read_wait_sdcmd(host, 100);
643 if (sdcmd & SDCMD_NEW_FLAG) {
644 dev_err(dev, "previous command never completed.\n");
645 bcm2835_dumpregs(host);
646 cmd->error = -EILSEQ;
647 bcm2835_finish_request(host);
648 return false;
649 }
650
651 if (!cmd->data && cmd->busy_timeout > 9000)
652 timeout = DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
653 else
654 timeout = 10 * HZ;
655 schedule_delayed_work(&host->timeout_work, timeout);
656
657 host->cmd = cmd;
658
659 /* Clear any error flags */
660 sdhsts = readl(host->ioaddr + SDHSTS);
661 if (sdhsts & SDHSTS_ERROR_MASK)
662 writel(sdhsts, host->ioaddr + SDHSTS);
663
664 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
665 dev_err(dev, "unsupported response type!\n");
666 cmd->error = -EINVAL;
667 bcm2835_finish_request(host);
668 return false;
669 }
670
671 bcm2835_prepare_data(host, cmd);
672
673 writel(cmd->arg, host->ioaddr + SDARG);
674
675 sdcmd = cmd->opcode & SDCMD_CMD_MASK;
676
677 host->use_busy = false;
678 if (!(cmd->flags & MMC_RSP_PRESENT)) {
679 sdcmd |= SDCMD_NO_RESPONSE;
680 } else {
681 if (cmd->flags & MMC_RSP_136)
682 sdcmd |= SDCMD_LONG_RESPONSE;
683 if (cmd->flags & MMC_RSP_BUSY) {
684 sdcmd |= SDCMD_BUSYWAIT;
685 host->use_busy = true;
686 }
687 }
688
689 if (cmd->data) {
690 if (cmd->data->flags & MMC_DATA_WRITE)
691 sdcmd |= SDCMD_WRITE_CMD;
692 if (cmd->data->flags & MMC_DATA_READ)
693 sdcmd |= SDCMD_READ_CMD;
694 }
695
696 writel(sdcmd | SDCMD_NEW_FLAG, host->ioaddr + SDCMD);
697
698 return true;
699}
700
701static void bcm2835_transfer_complete(struct bcm2835_host *host)
702{
703 struct mmc_data *data;
704
705 WARN_ON(!host->data_complete);
706
707 data = host->data;
708 host->data = NULL;
709
710 /* Need to send CMD12 if -
711 * a) open-ended multiblock transfer (no CMD23)
712 * b) error in multiblock transfer
713 */
714 if (host->mrq->stop && (data->error || !host->use_sbc)) {
715 if (bcm2835_send_command(host, host->mrq->stop)) {
716 /* No busy, so poll for completion */
717 if (!host->use_busy)
718 bcm2835_finish_command(host);
719 }
720 } else {
721 bcm2835_wait_transfer_complete(host);
722 bcm2835_finish_request(host);
723 }
724}
725
726static void bcm2835_finish_data(struct bcm2835_host *host)
727{
728 struct device *dev = &host->pdev->dev;
729 struct mmc_data *data;
730
731 data = host->data;
732
733 host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
734 writel(host->hcfg, host->ioaddr + SDHCFG);
735
736 data->bytes_xfered = data->error ? 0 : (data->blksz * data->blocks);
737
738 host->data_complete = true;
739
740 if (host->cmd) {
741 /* Data managed to finish before the
742 * command completed. Make sure we do
743 * things in the proper order.
744 */
745 dev_dbg(dev, "Finished early - HSTS %08x\n",
746 readl(host->ioaddr + SDHSTS));
747 } else {
748 bcm2835_transfer_complete(host);
749 }
750}
751
752static void bcm2835_finish_command(struct bcm2835_host *host)
753{
754 struct device *dev = &host->pdev->dev;
755 struct mmc_command *cmd = host->cmd;
756 u32 sdcmd;
757
758 sdcmd = bcm2835_read_wait_sdcmd(host, 100);
759
760 /* Check for errors */
761 if (sdcmd & SDCMD_NEW_FLAG) {
762 dev_err(dev, "command never completed.\n");
763 bcm2835_dumpregs(host);
764 host->cmd->error = -EIO;
765 bcm2835_finish_request(host);
766 return;
767 } else if (sdcmd & SDCMD_FAIL_FLAG) {
768 u32 sdhsts = readl(host->ioaddr + SDHSTS);
769
770 /* Clear the errors */
771 writel(SDHSTS_ERROR_MASK, host->ioaddr + SDHSTS);
772
773 if (!(sdhsts & SDHSTS_CRC7_ERROR) ||
774 (host->cmd->opcode != MMC_SEND_OP_COND)) {
775 if (sdhsts & SDHSTS_CMD_TIME_OUT) {
776 host->cmd->error = -ETIMEDOUT;
777 } else {
778 dev_err(dev, "unexpected command %d error\n",
779 host->cmd->opcode);
780 bcm2835_dumpregs(host);
781 host->cmd->error = -EILSEQ;
782 }
783 bcm2835_finish_request(host);
784 return;
785 }
786 }
787
788 if (cmd->flags & MMC_RSP_PRESENT) {
789 if (cmd->flags & MMC_RSP_136) {
790 int i;
791
792 for (i = 0; i < 4; i++) {
793 cmd->resp[3 - i] =
794 readl(host->ioaddr + SDRSP0 + i * 4);
795 }
796 } else {
797 cmd->resp[0] = readl(host->ioaddr + SDRSP0);
798 }
799 }
800
801 if (cmd == host->mrq->sbc) {
802 /* Finished CMD23, now send actual command. */
803 host->cmd = NULL;
804 if (bcm2835_send_command(host, host->mrq->cmd)) {
805 if (host->data && host->dma_desc)
806 /* DMA transfer starts now, PIO starts
807 * after irq
808 */
809 bcm2835_start_dma(host);
810
811 if (!host->use_busy)
812 bcm2835_finish_command(host);
813 }
814 } else if (cmd == host->mrq->stop) {
815 /* Finished CMD12 */
816 bcm2835_finish_request(host);
817 } else {
818 /* Processed actual command. */
819 host->cmd = NULL;
820 if (!host->data)
821 bcm2835_finish_request(host);
822 else if (host->data_complete)
823 bcm2835_transfer_complete(host);
824 }
825}
826
827static void bcm2835_timeout(struct work_struct *work)
828{
829 struct delayed_work *d = to_delayed_work(work);
830 struct bcm2835_host *host =
831 container_of(d, struct bcm2835_host, timeout_work);
832 struct device *dev = &host->pdev->dev;
833
834 mutex_lock(&host->mutex);
835
836 if (host->mrq) {
837 dev_err(dev, "timeout waiting for hardware interrupt.\n");
838 bcm2835_dumpregs(host);
839
840 if (host->data) {
841 host->data->error = -ETIMEDOUT;
842 bcm2835_finish_data(host);
843 } else {
844 if (host->cmd)
845 host->cmd->error = -ETIMEDOUT;
846 else
847 host->mrq->cmd->error = -ETIMEDOUT;
848
849 bcm2835_finish_request(host);
850 }
851 }
852
853 mutex_unlock(&host->mutex);
854}
855
856static bool bcm2835_check_cmd_error(struct bcm2835_host *host, u32 intmask)
857{
858 struct device *dev = &host->pdev->dev;
859
860 if (!(intmask & SDHSTS_ERROR_MASK))
861 return false;
862
863 if (!host->cmd)
864 return true;
865
866 dev_err(dev, "sdhost_busy_irq: intmask %08x\n", intmask);
867 if (intmask & SDHSTS_CRC7_ERROR) {
868 host->cmd->error = -EILSEQ;
869 } else if (intmask & (SDHSTS_CRC16_ERROR |
870 SDHSTS_FIFO_ERROR)) {
871 if (host->mrq->data)
872 host->mrq->data->error = -EILSEQ;
873 else
874 host->cmd->error = -EILSEQ;
875 } else if (intmask & SDHSTS_REW_TIME_OUT) {
876 if (host->mrq->data)
877 host->mrq->data->error = -ETIMEDOUT;
878 else
879 host->cmd->error = -ETIMEDOUT;
880 } else if (intmask & SDHSTS_CMD_TIME_OUT) {
881 host->cmd->error = -ETIMEDOUT;
882 }
883 bcm2835_dumpregs(host);
884 return true;
885}
886
887static void bcm2835_check_data_error(struct bcm2835_host *host, u32 intmask)
888{
889 if (!host->data)
890 return;
891 if (intmask & (SDHSTS_CRC16_ERROR | SDHSTS_FIFO_ERROR))
892 host->data->error = -EILSEQ;
893 if (intmask & SDHSTS_REW_TIME_OUT)
894 host->data->error = -ETIMEDOUT;
895}
896
897static void bcm2835_busy_irq(struct bcm2835_host *host)
898{
899 if (WARN_ON(!host->cmd)) {
900 bcm2835_dumpregs(host);
901 return;
902 }
903
904 if (WARN_ON(!host->use_busy)) {
905 bcm2835_dumpregs(host);
906 return;
907 }
908 host->use_busy = false;
909
910 bcm2835_finish_command(host);
911}
912
913static void bcm2835_data_irq(struct bcm2835_host *host, u32 intmask)
914{
915 /* There are no dedicated data/space available interrupt
916 * status bits, so it is necessary to use the single shared
917 * data/space available FIFO status bits. It is therefore not
918 * an error to get here when there is no data transfer in
919 * progress.
920 */
921 if (!host->data)
922 return;
923
924 bcm2835_check_data_error(host, intmask);
925 if (host->data->error)
926 goto finished;
927
928 if (host->data->flags & MMC_DATA_WRITE) {
929 /* Use the block interrupt for writes after the first block */
930 host->hcfg &= ~(SDHCFG_DATA_IRPT_EN);
931 host->hcfg |= SDHCFG_BLOCK_IRPT_EN;
932 writel(host->hcfg, host->ioaddr + SDHCFG);
933 bcm2835_transfer_pio(host);
934 } else {
935 bcm2835_transfer_pio(host);
936 host->blocks--;
937 if ((host->blocks == 0) || host->data->error)
938 goto finished;
939 }
940 return;
941
942finished:
943 host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
944 writel(host->hcfg, host->ioaddr + SDHCFG);
945}
946
947static void bcm2835_data_threaded_irq(struct bcm2835_host *host)
948{
949 if (!host->data)
950 return;
951 if ((host->blocks == 0) || host->data->error)
952 bcm2835_finish_data(host);
953}
954
955static void bcm2835_block_irq(struct bcm2835_host *host)
956{
957 if (WARN_ON(!host->data)) {
958 bcm2835_dumpregs(host);
959 return;
960 }
961
962 if (!host->dma_desc) {
963 WARN_ON(!host->blocks);
964 if (host->data->error || (--host->blocks == 0))
965 bcm2835_finish_data(host);
966 else
967 bcm2835_transfer_pio(host);
968 } else if (host->data->flags & MMC_DATA_WRITE) {
969 bcm2835_finish_data(host);
970 }
971}
972
973static irqreturn_t bcm2835_irq(int irq, void *dev_id)
974{
975 irqreturn_t result = IRQ_NONE;
976 struct bcm2835_host *host = dev_id;
977 u32 intmask;
978
979 spin_lock(&host->lock);
980
981 intmask = readl(host->ioaddr + SDHSTS);
982
983 writel(SDHSTS_BUSY_IRPT |
984 SDHSTS_BLOCK_IRPT |
985 SDHSTS_SDIO_IRPT |
986 SDHSTS_DATA_FLAG,
987 host->ioaddr + SDHSTS);
988
989 if (intmask & SDHSTS_BLOCK_IRPT) {
990 bcm2835_check_data_error(host, intmask);
991 host->irq_block = true;
992 result = IRQ_WAKE_THREAD;
993 }
994
995 if (intmask & SDHSTS_BUSY_IRPT) {
996 if (!bcm2835_check_cmd_error(host, intmask)) {
997 host->irq_busy = true;
998 result = IRQ_WAKE_THREAD;
999 } else {
1000 result = IRQ_HANDLED;
1001 }
1002 }
1003
1004 /* There is no true data interrupt status bit, so it is
1005 * necessary to qualify the data flag with the interrupt
1006 * enable bit.
1007 */
1008 if ((intmask & SDHSTS_DATA_FLAG) &&
1009 (host->hcfg & SDHCFG_DATA_IRPT_EN)) {
1010 bcm2835_data_irq(host, intmask);
1011 host->irq_data = true;
1012 result = IRQ_WAKE_THREAD;
1013 }
1014
1015 spin_unlock(&host->lock);
1016
1017 return result;
1018}
1019
1020static irqreturn_t bcm2835_threaded_irq(int irq, void *dev_id)
1021{
1022 struct bcm2835_host *host = dev_id;
1023 unsigned long flags;
1024 bool block, busy, data;
1025
1026 spin_lock_irqsave(&host->lock, flags);
1027
1028 block = host->irq_block;
1029 busy = host->irq_busy;
1030 data = host->irq_data;
1031 host->irq_block = false;
1032 host->irq_busy = false;
1033 host->irq_data = false;
1034
1035 spin_unlock_irqrestore(&host->lock, flags);
1036
1037 mutex_lock(&host->mutex);
1038
1039 if (block)
1040 bcm2835_block_irq(host);
1041 if (busy)
1042 bcm2835_busy_irq(host);
1043 if (data)
1044 bcm2835_data_threaded_irq(host);
1045
1046 mutex_unlock(&host->mutex);
1047
1048 return IRQ_HANDLED;
1049}
1050
1051static void bcm2835_dma_complete_work(struct work_struct *work)
1052{
1053 struct bcm2835_host *host =
1054 container_of(work, struct bcm2835_host, dma_work);
1055 struct mmc_data *data = host->data;
1056
1057 mutex_lock(&host->mutex);
1058
1059 if (host->dma_chan) {
1060 dma_unmap_sg(host->dma_chan->device->dev,
1061 data->sg, data->sg_len,
1062 host->dma_dir);
1063
1064 host->dma_chan = NULL;
1065 }
1066
1067 if (host->drain_words) {
1068 unsigned long flags;
1069 void *page;
1070 u32 *buf;
1071
1072 if (host->drain_offset & PAGE_MASK) {
1073 host->drain_page += host->drain_offset >> PAGE_SHIFT;
1074 host->drain_offset &= ~PAGE_MASK;
1075 }
1076 local_irq_save(flags);
1077 page = kmap_atomic(host->drain_page);
1078 buf = page + host->drain_offset;
1079
1080 while (host->drain_words) {
1081 u32 edm = readl(host->ioaddr + SDEDM);
1082
1083 if ((edm >> 4) & 0x1f)
1084 *(buf++) = readl(host->ioaddr + SDDATA);
1085 host->drain_words--;
1086 }
1087
1088 kunmap_atomic(page);
1089 local_irq_restore(flags);
1090 }
1091
1092 bcm2835_finish_data(host);
1093
1094 mutex_unlock(&host->mutex);
1095}
1096
1097static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
1098{
1099 int div;
1100
1101 /* The SDCDIV register has 11 bits, and holds (div - 2). But
1102 * in data mode the max is 50MHz wihout a minimum, and only
1103 * the bottom 3 bits are used. Since the switch over is
1104 * automatic (unless we have marked the card as slow...),
1105 * chosen values have to make sense in both modes. Ident mode
1106 * must be 100-400KHz, so can range check the requested
1107 * clock. CMD15 must be used to return to data mode, so this
1108 * can be monitored.
1109 *
1110 * clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz
1111 * 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz
1112 *
1113 * 623->400KHz/27.8MHz
1114 * reset value (507)->491159/50MHz
1115 *
1116 * BUT, the 3-bit clock divisor in data mode is too small if
1117 * the core clock is higher than 250MHz, so instead use the
1118 * SLOW_CARD configuration bit to force the use of the ident
1119 * clock divisor at all times.
1120 */
1121
1122 if (clock < 100000) {
1123 /* Can't stop the clock, but make it as slow as possible
1124 * to show willing
1125 */
1126 host->cdiv = SDCDIV_MAX_CDIV;
1127 writel(host->cdiv, host->ioaddr + SDCDIV);
1128 return;
1129 }
1130
1131 div = host->max_clk / clock;
1132 if (div < 2)
1133 div = 2;
1134 if ((host->max_clk / div) > clock)
1135 div++;
1136 div -= 2;
1137
1138 if (div > SDCDIV_MAX_CDIV)
1139 div = SDCDIV_MAX_CDIV;
1140
1141 clock = host->max_clk / (div + 2);
1142 host->mmc->actual_clock = clock;
1143
1144 /* Calibrate some delays */
1145
1146 host->ns_per_fifo_word = (1000000000 / clock) *
1147 ((host->mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32);
1148
1149 host->cdiv = div;
1150 writel(host->cdiv, host->ioaddr + SDCDIV);
1151
1152 /* Set the timeout to 500ms */
1153 writel(host->mmc->actual_clock / 2, host->ioaddr + SDTOUT);
1154}
1155
1156static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
1157{
1158 struct bcm2835_host *host = mmc_priv(mmc);
1159 struct device *dev = &host->pdev->dev;
1160 u32 edm, fsm;
1161
1162 /* Reset the error statuses in case this is a retry */
1163 if (mrq->sbc)
1164 mrq->sbc->error = 0;
1165 if (mrq->cmd)
1166 mrq->cmd->error = 0;
1167 if (mrq->data)
1168 mrq->data->error = 0;
1169 if (mrq->stop)
1170 mrq->stop->error = 0;
1171
1172 if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
1173 dev_err(dev, "unsupported block size (%d bytes)\n",
1174 mrq->data->blksz);
c00a231b
GS		 1175
1176 if (mrq->cmd)
1177 mrq->cmd->error = -EINVAL;
1178
660fc733
EA		 1179 mmc_request_done(mmc, mrq);
1180 return;
1181 }
1182
1183 if (host->use_dma && mrq->data && (mrq->data->blocks > PIO_THRESHOLD))
1184 bcm2835_prepare_dma(host, mrq->data);
1185
1186 mutex_lock(&host->mutex);
1187
1188 WARN_ON(host->mrq);
1189 host->mrq = mrq;
1190
1191 edm = readl(host->ioaddr + SDEDM);
1192 fsm = edm & SDEDM_FSM_MASK;
1193
1194 if ((fsm != SDEDM_FSM_IDENTMODE) &&
1195 (fsm != SDEDM_FSM_DATAMODE)) {
1196 dev_err(dev, "previous command (%d) not complete (EDM %08x)\n",
1197 readl(host->ioaddr + SDCMD) & SDCMD_CMD_MASK,
1198 edm);
1199 bcm2835_dumpregs(host);
c00a231b
GS		 1200
1201 if (mrq->cmd)
1202 mrq->cmd->error = -EILSEQ;
1203
660fc733
EA		 1204 bcm2835_finish_request(host);
1205 mutex_unlock(&host->mutex);
1206 return;
1207 }
1208
bf3240ba
SW		 1209 host->use_sbc = !!mrq->sbc && host->mrq->data &&
1210 (host->mrq->data->flags & MMC_DATA_READ);
660fc733
EA		 1211 if (host->use_sbc) {
1212 if (bcm2835_send_command(host, mrq->sbc)) {
1213 if (!host->use_busy)
1214 bcm2835_finish_command(host);
1215 }
c00a231b 1216 } else if (mrq->cmd && bcm2835_send_command(host, mrq->cmd)) {
660fc733
EA		 1217 if (host->data && host->dma_desc) {
1218 /* DMA transfer starts now, PIO starts after irq */
1219 bcm2835_start_dma(host);
1220 }
1221
1222 if (!host->use_busy)
1223 bcm2835_finish_command(host);
1224 }
1225
1226 mutex_unlock(&host->mutex);
1227}
1228
1229static void bcm2835_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1230{
1231 struct bcm2835_host *host = mmc_priv(mmc);
1232
1233 mutex_lock(&host->mutex);
1234
1235 if (!ios->clock || ios->clock != host->clock) {
1236 bcm2835_set_clock(host, ios->clock);
1237 host->clock = ios->clock;
1238 }
1239
1240 /* set bus width */
1241 host->hcfg &= ~SDHCFG_WIDE_EXT_BUS;
1242 if (ios->bus_width == MMC_BUS_WIDTH_4)
1243 host->hcfg |= SDHCFG_WIDE_EXT_BUS;
1244
1245 host->hcfg |= SDHCFG_WIDE_INT_BUS;
1246
1247 /* Disable clever clock switching, to cope with fast core clocks */
1248 host->hcfg |= SDHCFG_SLOW_CARD;
1249
1250 writel(host->hcfg, host->ioaddr + SDHCFG);
1251
1252 mutex_unlock(&host->mutex);
1253}
1254
2c9e89a1 1255static const struct mmc_host_ops bcm2835_ops = {
660fc733
EA		 1256 .request = bcm2835_request,
1257 .set_ios = bcm2835_set_ios,
1258 .hw_reset = bcm2835_reset,
1259};
1260
1261static int bcm2835_add_host(struct bcm2835_host *host)
1262{
1263 struct mmc_host *mmc = host->mmc;
1264 struct device *dev = &host->pdev->dev;
1265 char pio_limit_string[20];
1266 int ret;
1267
118032be
PE		 1268 if (!mmc->f_max || mmc->f_max > host->max_clk)
1269 mmc->f_max = host->max_clk;
660fc733
EA		 1270 mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV;
1271
1272 mmc->max_busy_timeout = ~0 / (mmc->f_max / 1000);
1273
1274 dev_dbg(dev, "f_max %d, f_min %d, max_busy_timeout %d\n",
1275 mmc->f_max, mmc->f_min, mmc->max_busy_timeout);
1276
1277 /* host controller capabilities */
1278 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
1279 MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE |
1280 MMC_CAP_CMD23;
1281
1282 spin_lock_init(&host->lock);
1283 mutex_init(&host->mutex);
1284
1285 if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) {
1286 dev_warn(dev, "unable to initialise DMA channel. Falling back to PIO\n");
1287 host->use_dma = false;
1288 } else {
1289 host->use_dma = true;
1290
1291 host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
1292 host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
1293 host->dma_cfg_tx.slave_id = 13; /* DREQ channel */
1294 host->dma_cfg_tx.direction = DMA_MEM_TO_DEV;
1295 host->dma_cfg_tx.src_addr = 0;
1296 host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA;
1297
1298 host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
1299 host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
1300 host->dma_cfg_rx.slave_id = 13; /* DREQ channel */
1301 host->dma_cfg_rx.direction = DMA_DEV_TO_MEM;
1302 host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA;
1303 host->dma_cfg_rx.dst_addr = 0;
1304
1305 if (dmaengine_slave_config(host->dma_chan_rxtx,
1306 &host->dma_cfg_tx) != 0 ||
1307 dmaengine_slave_config(host->dma_chan_rxtx,
1308 &host->dma_cfg_rx) != 0)
1309 host->use_dma = false;
1310 }
1311
1312 mmc->max_segs = 128;
1313 mmc->max_req_size = 524288;
1314 mmc->max_seg_size = mmc->max_req_size;
1315 mmc->max_blk_size = 1024;
1316 mmc->max_blk_count = 65535;
1317
1318 /* report supported voltage ranges */
1319 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
1320
1321 INIT_WORK(&host->dma_work, bcm2835_dma_complete_work);
1322 INIT_DELAYED_WORK(&host->timeout_work, bcm2835_timeout);
1323
1324 /* Set interrupt enables */
1325 host->hcfg = SDHCFG_BUSY_IRPT_EN;
1326
1327 bcm2835_reset_internal(host);
1328
1329 ret = request_threaded_irq(host->irq, bcm2835_irq,
1330 bcm2835_threaded_irq,
1331 0, mmc_hostname(mmc), host);
1332 if (ret) {
1333 dev_err(dev, "failed to request IRQ %d: %d\n", host->irq, ret);
1334 return ret;
1335 }
1336
1337 ret = mmc_add_host(mmc);
1338 if (ret) {
1339 free_irq(host->irq, host);
1340 return ret;
1341 }
1342
1343 pio_limit_string[0] = '\0';
1344 if (host->use_dma && (PIO_THRESHOLD > 0))
1345 sprintf(pio_limit_string, " (>%d)", PIO_THRESHOLD);
1346 dev_info(dev, "loaded - DMA %s%s\n",
1347 host->use_dma ? "enabled" : "disabled", pio_limit_string);
1348
1349 return 0;
1350}
1351
1352static int bcm2835_probe(struct platform_device *pdev)
1353{
1354 struct device *dev = &pdev->dev;
1355 struct clk *clk;
1356 struct resource *iomem;
1357 struct bcm2835_host *host;
1358 struct mmc_host *mmc;
1359 const __be32 *regaddr_p;
1360 int ret;
1361
1362 dev_dbg(dev, "%s\n", __func__);
1363 mmc = mmc_alloc_host(sizeof(*host), dev);
1364 if (!mmc)
1365 return -ENOMEM;
1366
1367 mmc->ops = &bcm2835_ops;
1368 host = mmc_priv(mmc);
1369 host->mmc = mmc;
1370 host->pdev = pdev;
1371 spin_lock_init(&host->lock);
1372
1373 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1374 host->ioaddr = devm_ioremap_resource(dev, iomem);
1375 if (IS_ERR(host->ioaddr)) {
1376 ret = PTR_ERR(host->ioaddr);
1377 goto err;
1378 }
1379
1380 /* Parse OF address directly to get the physical address for
1381 * DMA to our registers.
1382 */
1383 regaddr_p = of_get_address(pdev->dev.of_node, 0, NULL, NULL);
1384 if (!regaddr_p) {
1385 dev_err(dev, "Can't get phys address\n");
1386 ret = -EINVAL;
1387 goto err;
1388 }
1389
1390 host->phys_addr = be32_to_cpup(regaddr_p);
1391
1392 host->dma_chan = NULL;
1393 host->dma_desc = NULL;
1394
1395 host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx");
1396
1397 clk = devm_clk_get(dev, NULL);
1398 if (IS_ERR(clk)) {
1399 ret = PTR_ERR(clk);
1400 if (ret != -EPROBE_DEFER)
1401 dev_err(dev, "could not get clk: %d\n", ret);
1402 goto err;
1403 }
1404
1405 host->max_clk = clk_get_rate(clk);
1406
1407 host->irq = platform_get_irq(pdev, 0);
1408 if (host->irq <= 0) {
1409 dev_err(dev, "get IRQ failed\n");
1410 ret = -EINVAL;
1411 goto err;
1412 }
1413
1414 ret = mmc_of_parse(mmc);
1415 if (ret)
1416 goto err;
1417
1418 ret = bcm2835_add_host(host);
1419 if (ret)
1420 goto err;
1421
1422 platform_set_drvdata(pdev, host);
1423
1424 dev_dbg(dev, "%s -> OK\n", __func__);
1425
1426 return 0;
1427
1428err:
1429 dev_dbg(dev, "%s -> err %d\n", __func__, ret);
1430 mmc_free_host(mmc);
1431
1432 return ret;
1433}
1434
1435static int bcm2835_remove(struct platform_device *pdev)
1436{
1437 struct bcm2835_host *host = platform_get_drvdata(pdev);
1438
1439 mmc_remove_host(host->mmc);
1440
1441 writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD);
1442
1443 free_irq(host->irq, host);
1444
1445 cancel_work_sync(&host->dma_work);
1446 cancel_delayed_work_sync(&host->timeout_work);
1447
1448 mmc_free_host(host->mmc);
1449 platform_set_drvdata(pdev, NULL);
1450
1451 return 0;
1452}
1453
1454static const struct of_device_id bcm2835_match[] = {
1455 { .compatible = "brcm,bcm2835-sdhost" },
1456 { }
1457};
1458MODULE_DEVICE_TABLE(of, bcm2835_match);
1459
1460static struct platform_driver bcm2835_driver = {
1461 .probe = bcm2835_probe,
1462 .remove = bcm2835_remove,
1463 .driver = {
1464 .name = "sdhost-bcm2835",
1465 .of_match_table = bcm2835_match,
1466 },
1467};
1468module_platform_driver(bcm2835_driver);
1469
1470MODULE_ALIAS("platform:sdhost-bcm2835");
1471MODULE_DESCRIPTION("BCM2835 SDHost driver");
1472MODULE_LICENSE("GPL v2");
1473MODULE_AUTHOR("Phil Elwell");
Linux 6.x block layer and io_uring tree(s)