ath9k: simplify ath9k_hw_get_scaled_power function

[linux-2.6-block.git] / drivers / mfd / wm8994-irq.c

/*
 * wm8994-irq.c  --  Interrupt controller support for Wolfson WM8994
 *
 * Copyright 2010 Wolfson Microelectronics PLC.
 *
 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/regmap.h>

#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/registers.h>

#include <linux/delay.h>

static struct regmap_irq wm8994_irqs[] = {
	[WM8994_IRQ_TEMP_SHUT] = {
		.reg_offset = 1,
		.mask = WM8994_TEMP_SHUT_EINT,
	},
	[WM8994_IRQ_MIC1_DET] = {
		.reg_offset = 1,
		.mask = WM8994_MIC1_DET_EINT,
	},
	[WM8994_IRQ_MIC1_SHRT] = {
		.reg_offset = 1,
		.mask = WM8994_MIC1_SHRT_EINT,
	},
	[WM8994_IRQ_MIC2_DET] = {
		.reg_offset = 1,
		.mask = WM8994_MIC2_DET_EINT,
	},
	[WM8994_IRQ_MIC2_SHRT] = {
		.reg_offset = 1,
		.mask = WM8994_MIC2_SHRT_EINT,
	},
	[WM8994_IRQ_FLL1_LOCK] = {
		.reg_offset = 1,
		.mask = WM8994_FLL1_LOCK_EINT,
	},
	[WM8994_IRQ_FLL2_LOCK] = {
		.reg_offset = 1,
		.mask = WM8994_FLL2_LOCK_EINT,
	},
	[WM8994_IRQ_SRC1_LOCK] = {
		.reg_offset = 1,
		.mask = WM8994_SRC1_LOCK_EINT,
	},
	[WM8994_IRQ_SRC2_LOCK] = {
		.reg_offset = 1,
		.mask = WM8994_SRC2_LOCK_EINT,
	},
	[WM8994_IRQ_AIF1DRC1_SIG_DET] = {
		.reg_offset = 1,
		.mask = WM8994_AIF1DRC1_SIG_DET,
	},
	[WM8994_IRQ_AIF1DRC2_SIG_DET] = {
		.reg_offset = 1,
		.mask = WM8994_AIF1DRC2_SIG_DET_EINT,
	},
	[WM8994_IRQ_AIF2DRC_SIG_DET] = {
		.reg_offset = 1,
		.mask = WM8994_AIF2DRC_SIG_DET_EINT,
	},
	[WM8994_IRQ_FIFOS_ERR] = {
		.reg_offset = 1,
		.mask = WM8994_FIFOS_ERR_EINT,
	},
	[WM8994_IRQ_WSEQ_DONE] = {
		.reg_offset = 1,
		.mask = WM8994_WSEQ_DONE_EINT,
	},
	[WM8994_IRQ_DCS_DONE] = {
		.reg_offset = 1,
		.mask = WM8994_DCS_DONE_EINT,
	},
	[WM8994_IRQ_TEMP_WARN] = {
		.reg_offset = 1,
		.mask = WM8994_TEMP_WARN_EINT,
	},
	[WM8994_IRQ_GPIO(1)] = {
		.mask = WM8994_GP1_EINT,
	},
	[WM8994_IRQ_GPIO(2)] = {
		.mask = WM8994_GP2_EINT,
	},
	[WM8994_IRQ_GPIO(3)] = {
		.mask = WM8994_GP3_EINT,
	},
	[WM8994_IRQ_GPIO(4)] = {
		.mask = WM8994_GP4_EINT,
	},
	[WM8994_IRQ_GPIO(5)] = {
		.mask = WM8994_GP5_EINT,
	},
	[WM8994_IRQ_GPIO(6)] = {
		.mask = WM8994_GP6_EINT,
	},
	[WM8994_IRQ_GPIO(7)] = {
		.mask = WM8994_GP7_EINT,
	},
	[WM8994_IRQ_GPIO(8)] = {
		.mask = WM8994_GP8_EINT,
	},
	[WM8994_IRQ_GPIO(9)] = {
		.mask = WM8994_GP8_EINT,
	},
	[WM8994_IRQ_GPIO(10)] = {
		.mask = WM8994_GP10_EINT,
	},
	[WM8994_IRQ_GPIO(11)] = {
		.mask = WM8994_GP11_EINT,
	},
};

static struct regmap_irq_chip wm8994_irq_chip = {
	.name = "wm8994",
	.irqs = wm8994_irqs,
	.num_irqs = ARRAY_SIZE(wm8994_irqs),

	.num_regs = 2,
	.status_base = WM8994_INTERRUPT_STATUS_1,
	.mask_base = WM8994_INTERRUPT_STATUS_1_MASK,
	.ack_base = WM8994_INTERRUPT_STATUS_1,
};

int wm8994_irq_init(struct wm8994 *wm8994)
{
	int ret;

	if (!wm8994->irq) {
		dev_warn(wm8994->dev,
			 "No interrupt specified, no interrupts\n");
		wm8994->irq_base = 0;
		return 0;
	}

	if (!wm8994->irq_base) {
		dev_err(wm8994->dev,
			"No interrupt base specified, no interrupts\n");
		return 0;
	}

	ret = regmap_add_irq_chip(wm8994->regmap, wm8994->irq,
				  IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
				  wm8994->irq_base, &wm8994_irq_chip,
				  &wm8994->irq_data);
	if (ret != 0) {
		dev_err(wm8994->dev, "Failed to register IRQ chip: %d\n", ret);
		return ret;
	}

	/* Enable top level interrupt if it was masked */
	wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0);

	return 0;
}

void wm8994_irq_exit(struct wm8994 *wm8994)
{
	regmap_del_irq_chip(wm8994->irq, wm8994->irq_data);
}