[linux-2.6-block.git] / drivers / mfd / ucb1x00-ts.c

/*
 *  Touchscreen driver for UCB1x00-based touchscreens
 *
 *  Copyright (C) 2001 Russell King, All Rights Reserved.
 *  Copyright (C) 2005 Pavel Machek
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * 21-Jan-2002 <jco@ict.es> :
 *
 * Added support for synchronous A/D mode. This mode is useful to
 * avoid noise induced in the touchpanel by the LCD, provided that
 * the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin.
 * It is important to note that the signal connected to the ADCSYNC
 * pin should provide pulses even when the LCD is blanked, otherwise
 * a pen touch needed to unblank the LCD will never be read.
 */
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/sched.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/input.h>
#include <linux/device.h>
#include <linux/freezer.h>
#include <linux/slab.h>
#include <linux/kthread.h>

#include <asm/dma.h>
#include <asm/semaphore.h>
#include <asm/arch/collie.h>
#include <asm/mach-types.h>

#include "ucb1x00.h"


struct ucb1x00_ts {
	struct input_dev	*idev;
	struct ucb1x00		*ucb;

	wait_queue_head_t	irq_wait;
	struct task_struct	*rtask;
	u16			x_res;
	u16			y_res;

	unsigned int		restart:1;
	unsigned int		adcsync:1;
};

static int adcsync;

static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y)
{
	struct input_dev *idev = ts->idev;

	input_report_abs(idev, ABS_X, x);
	input_report_abs(idev, ABS_Y, y);
	input_report_abs(idev, ABS_PRESSURE, pressure);
	input_sync(idev);
}

static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts)
{
	struct input_dev *idev = ts->idev;

	input_report_abs(idev, ABS_PRESSURE, 0);
	input_sync(idev);
}

/*
 * Switch to interrupt mode.
 */
static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts)
{
	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
			UCB_TS_CR_MODE_INT);
}

/*
 * Switch to pressure mode, and read pressure.  We don't need to wait
 * here, since both plates are being driven.
 */
static inline unsigned int ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts)
{
	if (machine_is_collie()) {
		ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0);
		ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
				  UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW |
				  UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);

		udelay(55);

		return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_AD2, ts->adcsync);
	} else {
		ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
				  UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
				  UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
				  UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);

		return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
	}
}

/*
 * Switch to X position mode and measure Y plate.  We switch the plate
 * configuration in pressure mode, then switch to position mode.  This
 * gives a faster response time.  Even so, we need to wait about 55us
 * for things to stabilise.
 */
static inline unsigned int ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts)
{
	if (machine_is_collie())
		ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
	else {
		ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
				  UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
				  UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
		ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
				  UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
				  UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
	}
	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);

	udelay(55);

	return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
}

/*
 * Switch to Y position mode and measure X plate.  We switch the plate
 * configuration in pressure mode, then switch to position mode.  This
 * gives a faster response time.  Even so, we need to wait about 55us
 * for things to stabilise.
 */
static inline unsigned int ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts)
{
	if (machine_is_collie())
		ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
	else {
		ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
				  UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
				  UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
		ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
				  UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
				  UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
	}

	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);

	udelay(55);

	return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPX, ts->adcsync);
}

/*
 * Switch to X plate resistance mode.  Set MX to ground, PX to
 * supply.  Measure current.
 */
static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts)
{
	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
	return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
}

/*
 * Switch to Y plate resistance mode.  Set MY to ground, PY to
 * supply.  Measure current.
 */
static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts)
{
	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
	return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
}

static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts)
{
	unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);

	if (machine_is_collie())
		return (!(val & (UCB_TS_CR_TSPX_LOW)));
	else
		return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
}

/*
 * This is a RT kernel thread that handles the ADC accesses
 * (mainly so we can use semaphores in the UCB1200 core code
 * to serialise accesses to the ADC).
 */
static int ucb1x00_thread(void *_ts)
{
	struct ucb1x00_ts *ts = _ts;
	struct task_struct *tsk = current;
	DECLARE_WAITQUEUE(wait, tsk);
	int valid = 0;

	add_wait_queue(&ts->irq_wait, &wait);
	while (!kthread_should_stop()) {
		unsigned int x, y, p;
		signed long timeout;

		ts->restart = 0;

		ucb1x00_adc_enable(ts->ucb);

		x = ucb1x00_ts_read_xpos(ts);
		y = ucb1x00_ts_read_ypos(ts);
		p = ucb1x00_ts_read_pressure(ts);

		/*
		 * Switch back to interrupt mode.
		 */
		ucb1x00_ts_mode_int(ts);
		ucb1x00_adc_disable(ts->ucb);

		msleep(10);

		ucb1x00_enable(ts->ucb);


		if (ucb1x00_ts_pen_down(ts)) {
			set_task_state(tsk, TASK_INTERRUPTIBLE);

			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
			ucb1x00_disable(ts->ucb);

			/*
			 * If we spat out a valid sample set last time,
			 * spit out a "pen off" sample here.
			 */
			if (valid) {
				ucb1x00_ts_event_release(ts);
				valid = 0;
			}

			timeout = MAX_SCHEDULE_TIMEOUT;
		} else {
			ucb1x00_disable(ts->ucb);

			/*
			 * Filtering is policy.  Policy belongs in user
			 * space.  We therefore leave it to user space
			 * to do any filtering they please.
			 */
			if (!ts->restart) {
				ucb1x00_ts_evt_add(ts, p, x, y);
				valid = 1;
			}

			set_task_state(tsk, TASK_INTERRUPTIBLE);
			timeout = HZ / 100;
		}

		try_to_freeze();

		schedule_timeout(timeout);
	}

	remove_wait_queue(&ts->irq_wait, &wait);

	ts->rtask = NULL;
	return 0;
}

/*
 * We only detect touch screen _touches_ with this interrupt
 * handler, and even then we just schedule our task.
 */
static void ucb1x00_ts_irq(int idx, void *id)
{
	struct ucb1x00_ts *ts = id;

	ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
	wake_up(&ts->irq_wait);
}

static int ucb1x00_ts_open(struct input_dev *idev)
{
	struct ucb1x00_ts *ts = idev->private;
	int ret = 0;

	BUG_ON(ts->rtask);

	init_waitqueue_head(&ts->irq_wait);
	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
	if (ret < 0)
		goto out;

	/*
	 * If we do this at all, we should allow the user to
	 * measure and read the X and Y resistance at any time.
	 */
	ucb1x00_adc_enable(ts->ucb);
	ts->x_res = ucb1x00_ts_read_xres(ts);
	ts->y_res = ucb1x00_ts_read_yres(ts);
	ucb1x00_adc_disable(ts->ucb);

	ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd");
	if (!IS_ERR(ts->rtask)) {
		ret = 0;
	} else {
		ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
		ts->rtask = NULL;
		ret = -EFAULT;
	}

 out:
	return ret;
}

/*
 * Release touchscreen resources.  Disable IRQs.
 */
static void ucb1x00_ts_close(struct input_dev *idev)
{
	struct ucb1x00_ts *ts = idev->private;

	if (ts->rtask)
		kthread_stop(ts->rtask);

	ucb1x00_enable(ts->ucb);
	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
	ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
	ucb1x00_disable(ts->ucb);
}

#ifdef CONFIG_PM
static int ucb1x00_ts_resume(struct ucb1x00_dev *dev)
{
	struct ucb1x00_ts *ts = dev->priv;

	if (ts->rtask != NULL) {
		/*
		 * Restart the TS thread to ensure the
		 * TS interrupt mode is set up again
		 * after sleep.
		 */
		ts->restart = 1;
		wake_up(&ts->irq_wait);
	}
	return 0;
}
#else
#define ucb1x00_ts_resume NULL
#endif


/*
 * Initialisation.
 */
static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
{
	struct ucb1x00_ts *ts;
	struct input_dev *idev;
	int err;

	ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
	idev = input_allocate_device();
	if (!ts || !idev) {
		err = -ENOMEM;
		goto fail;
	}

	ts->ucb = dev->ucb;
	ts->idev = idev;
	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;

	idev->private    = ts;
	idev->name       = "Touchscreen panel";
	idev->id.product = ts->ucb->id;
	idev->open       = ucb1x00_ts_open;
	idev->close      = ucb1x00_ts_close;

	__set_bit(EV_ABS, idev->evbit);
	__set_bit(ABS_X, idev->absbit);
	__set_bit(ABS_Y, idev->absbit);
	__set_bit(ABS_PRESSURE, idev->absbit);

	err = input_register_device(idev);
	if (err)
		goto fail;

	dev->priv = ts;

	return 0;

 fail:
	input_free_device(idev);
	kfree(ts);
	return err;
}

static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
{
	struct ucb1x00_ts *ts = dev->priv;

	input_unregister_device(ts->idev);
	kfree(ts);
}

static struct ucb1x00_driver ucb1x00_ts_driver = {
	.add		= ucb1x00_ts_add,
	.remove		= ucb1x00_ts_remove,
	.resume		= ucb1x00_ts_resume,
};

static int __init ucb1x00_ts_init(void)
{
	return ucb1x00_register_driver(&ucb1x00_ts_driver);
}

static void __exit ucb1x00_ts_exit(void)
{
	ucb1x00_unregister_driver(&ucb1x00_ts_driver);
}

module_param(adcsync, int, 0444);
module_init(ucb1x00_ts_init);
module_exit(ucb1x00_ts_exit);

MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("UCB1x00 touchscreen driver");
MODULE_LICENSE("GPL");
Commit	Line	Data
acb45439	1	/*
5437775e	2	* Touchscreen driver for UCB1x00-based touchscreens
acb45439 RK	3	*
acb45439 RK	4	* Copyright (C) 2001 Russell King, All Rights Reserved.
5437775e	5	* Copyright (C) 2005 Pavel Machek
acb45439 RK	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License version 2 as
	9	* published by the Free Software Foundation.
	10	*
	11	* 21-Jan-2002 <jco@ict.es> :
	12	*
	13	* Added support for synchronous A/D mode. This mode is useful to
	14	* avoid noise induced in the touchpanel by the LCD, provided that
	15	* the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin.
	16	* It is important to note that the signal connected to the ADCSYNC
	17	* pin should provide pulses even when the LCD is blanked, otherwise
	18	* a pen touch needed to unblank the LCD will never be read.
	19	*/
acb45439 RK	20	#include <linux/module.h>
	21	#include <linux/moduleparam.h>
	22	#include <linux/init.h>
	23	#include <linux/smp.h>
acb45439 RK	24	#include <linux/sched.h>
	25	#include <linux/completion.h>
	26	#include <linux/delay.h>
	27	#include <linux/string.h>
	28	#include <linux/input.h>
	29	#include <linux/device.h>
7dfb7103	30	#include <linux/freezer.h>
acb45439	31	#include <linux/slab.h>
5437775e	32	#include <linux/kthread.h>
acb45439 RK	33
	34	#include <asm/dma.h>
	35	#include <asm/semaphore.h>
17532989 PM	36	#include <asm/arch/collie.h>
17532989 PM	37	#include <asm/mach-types.h>
acb45439 RK	38
	39	#include "ucb1x00.h"
	40
	41
	42	struct ucb1x00_ts {
bd622663	43	struct input_dev *idev;
acb45439 RK	44	struct ucb1x00 *ucb;
	45
	46	wait_queue_head_t irq_wait;
acb45439	47	struct task_struct *rtask;
acb45439 RK	48	u16 x_res;
	49	u16 y_res;
	50
6b9ea421 RK	51	unsigned int restart:1;
6b9ea421 RK	52	unsigned int adcsync:1;
acb45439 RK	53	};
	54
	55	static int adcsync;
	56
	57	static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y)
	58	{
1393c3ed	59	struct input_dev *idev = ts->idev;
08c67d2a	60
1393c3ed NP	61	input_report_abs(idev, ABS_X, x);
	62	input_report_abs(idev, ABS_Y, y);
	63	input_report_abs(idev, ABS_PRESSURE, pressure);
	64	input_sync(idev);
acb45439 RK	65	}
	66
	67	static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts)
	68	{
1393c3ed	69	struct input_dev *idev = ts->idev;
08c67d2a	70
1393c3ed NP	71	input_report_abs(idev, ABS_PRESSURE, 0);
1393c3ed NP	72	input_sync(idev);
acb45439 RK	73	}
	74
	75	/*
	76	* Switch to interrupt mode.
	77	*/
	78	static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts)
	79	{
	80	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	81	UCB_TS_CR_TSMX_POW \| UCB_TS_CR_TSPX_POW \|
	82	UCB_TS_CR_TSMY_GND \| UCB_TS_CR_TSPY_GND \|
	83	UCB_TS_CR_MODE_INT);
	84	}
	85
	86	/*
	87	* Switch to pressure mode, and read pressure. We don't need to wait
	88	* here, since both plates are being driven.
	89	*/
	90	static inline unsigned int ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts)
	91	{
17532989 PM	92	if (machine_is_collie()) {
	93	ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0);
	94	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	95	UCB_TS_CR_TSPX_POW \| UCB_TS_CR_TSMX_POW \|
	96	UCB_TS_CR_MODE_POS \| UCB_TS_CR_BIAS_ENA);
	97
	98	udelay(55);
	99
	100	return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_AD2, ts->adcsync);
	101	} else {
	102	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	103	UCB_TS_CR_TSMX_POW \| UCB_TS_CR_TSPX_POW \|
	104	UCB_TS_CR_TSMY_GND \| UCB_TS_CR_TSPY_GND \|
	105	UCB_TS_CR_MODE_PRES \| UCB_TS_CR_BIAS_ENA);
	106
	107	return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
	108	}
acb45439 RK	109	}
	110
	111	/*
	112	* Switch to X position mode and measure Y plate. We switch the plate
	113	* configuration in pressure mode, then switch to position mode. This
	114	* gives a faster response time. Even so, we need to wait about 55us
	115	* for things to stabilise.
	116	*/
	117	static inline unsigned int ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts)
	118	{
17532989 PM	119	if (machine_is_collie())
	120	ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
	121	else {
	122	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	123	UCB_TS_CR_TSMX_GND \| UCB_TS_CR_TSPX_POW \|
	124	UCB_TS_CR_MODE_PRES \| UCB_TS_CR_BIAS_ENA);
	125	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	126	UCB_TS_CR_TSMX_GND \| UCB_TS_CR_TSPX_POW \|
	127	UCB_TS_CR_MODE_PRES \| UCB_TS_CR_BIAS_ENA);
	128	}
acb45439 RK	129	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	130	UCB_TS_CR_TSMX_GND \| UCB_TS_CR_TSPX_POW \|
	131	UCB_TS_CR_MODE_POS \| UCB_TS_CR_BIAS_ENA);
	132
	133	udelay(55);
	134
	135	return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
	136	}
	137
	138	/*
	139	* Switch to Y position mode and measure X plate. We switch the plate
	140	* configuration in pressure mode, then switch to position mode. This
	141	* gives a faster response time. Even so, we need to wait about 55us
	142	* for things to stabilise.
	143	*/
	144	static inline unsigned int ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts)
	145	{
17532989 PM	146	if (machine_is_collie())
	147	ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
	148	else {
	149	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	150	UCB_TS_CR_TSMY_GND \| UCB_TS_CR_TSPY_POW \|
	151	UCB_TS_CR_MODE_PRES \| UCB_TS_CR_BIAS_ENA);
	152	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	153	UCB_TS_CR_TSMY_GND \| UCB_TS_CR_TSPY_POW \|
	154	UCB_TS_CR_MODE_PRES \| UCB_TS_CR_BIAS_ENA);
	155	}
	156
acb45439 RK	157	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	158	UCB_TS_CR_TSMY_GND \| UCB_TS_CR_TSPY_POW \|
	159	UCB_TS_CR_MODE_POS \| UCB_TS_CR_BIAS_ENA);
	160
	161	udelay(55);
	162
	163	return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPX, ts->adcsync);
	164	}
	165
	166	/*
	167	* Switch to X plate resistance mode. Set MX to ground, PX to
	168	* supply. Measure current.
	169	*/
	170	static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts)
	171	{
	172	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	173	UCB_TS_CR_TSMX_GND \| UCB_TS_CR_TSPX_POW \|
	174	UCB_TS_CR_MODE_PRES \| UCB_TS_CR_BIAS_ENA);
	175	return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
	176	}
	177
	178	/*
	179	* Switch to Y plate resistance mode. Set MY to ground, PY to
	180	* supply. Measure current.
	181	*/
	182	static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts)
	183	{
	184	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
	185	UCB_TS_CR_TSMY_GND \| UCB_TS_CR_TSPY_POW \|
	186	UCB_TS_CR_MODE_PRES \| UCB_TS_CR_BIAS_ENA);
	187	return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
	188	}
	189
17532989 PM	190	static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts)
	191	{
	192	unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);
08c67d2a	193
17532989 PM	194	if (machine_is_collie())
	195	return (!(val & (UCB_TS_CR_TSPX_LOW)));
	196	else
	197	return (val & (UCB_TS_CR_TSPX_LOW \| UCB_TS_CR_TSMX_LOW));
	198	}
	199
acb45439 RK	200	/*
	201	* This is a RT kernel thread that handles the ADC accesses
	202	* (mainly so we can use semaphores in the UCB1200 core code
	203	* to serialise accesses to the ADC).
	204	*/
	205	static int ucb1x00_thread(void *_ts)
	206	{
	207	struct ucb1x00_ts *ts = _ts;
	208	struct task_struct *tsk = current;
	209	DECLARE_WAITQUEUE(wait, tsk);
1124d5ca	210	int valid = 0;
acb45439 RK	211
acb45439 RK	212	add_wait_queue(&ts->irq_wait, &wait);
5437775e	213	while (!kthread_should_stop()) {
17532989	214	unsigned int x, y, p;
acb45439 RK	215	signed long timeout;
	216
	217	ts->restart = 0;
	218
	219	ucb1x00_adc_enable(ts->ucb);
	220
	221	x = ucb1x00_ts_read_xpos(ts);
	222	y = ucb1x00_ts_read_ypos(ts);
	223	p = ucb1x00_ts_read_pressure(ts);
	224
	225	/*
	226	* Switch back to interrupt mode.
	227	*/
	228	ucb1x00_ts_mode_int(ts);
	229	ucb1x00_adc_disable(ts->ucb);
	230
5437775e	231	msleep(10);
acb45439 RK	232
acb45439 RK	233	ucb1x00_enable(ts->ucb);
acb45439	234
17532989 PM	235
17532989 PM	236	if (ucb1x00_ts_pen_down(ts)) {
acb45439 RK	237	set_task_state(tsk, TASK_INTERRUPTIBLE);
acb45439 RK	238
17532989	239	ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
acb45439 RK	240	ucb1x00_disable(ts->ucb);
	241
	242	/*
	243	* If we spat out a valid sample set last time,
	244	* spit out a "pen off" sample here.
	245	*/
	246	if (valid) {
	247	ucb1x00_ts_event_release(ts);
	248	valid = 0;
	249	}
	250
	251	timeout = MAX_SCHEDULE_TIMEOUT;
	252	} else {
	253	ucb1x00_disable(ts->ucb);
	254
	255	/*
	256	* Filtering is policy. Policy belongs in user
	257	* space. We therefore leave it to user space
	258	* to do any filtering they please.
	259	*/
	260	if (!ts->restart) {
	261	ucb1x00_ts_evt_add(ts, p, x, y);
	262	valid = 1;
	263	}
	264
	265	set_task_state(tsk, TASK_INTERRUPTIBLE);
	266	timeout = HZ / 100;
	267	}
	268
	269	try_to_freeze();
	270
	271	schedule_timeout(timeout);
acb45439 RK	272	}
	273
	274	remove_wait_queue(&ts->irq_wait, &wait);
	275
	276	ts->rtask = NULL;
5437775e	277	return 0;
acb45439 RK	278	}
	279
	280	/*
	281	* We only detect touch screen _touches_ with this interrupt
	282	* handler, and even then we just schedule our task.
	283	*/
	284	static void ucb1x00_ts_irq(int idx, void *id)
	285	{
	286	struct ucb1x00_ts *ts = id;
08c67d2a	287
acb45439 RK	288	ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
	289	wake_up(&ts->irq_wait);
	290	}
	291
	292	static int ucb1x00_ts_open(struct input_dev *idev)
	293	{
1393c3ed	294	struct ucb1x00_ts *ts = idev->private;
acb45439 RK	295	int ret = 0;
acb45439 RK	296
5437775e	297	BUG_ON(ts->rtask);
acb45439 RK	298
	299	init_waitqueue_head(&ts->irq_wait);
	300	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
	301	if (ret < 0)
	302	goto out;
	303
	304	/*
	305	* If we do this at all, we should allow the user to
	306	* measure and read the X and Y resistance at any time.
	307	*/
	308	ucb1x00_adc_enable(ts->ucb);
	309	ts->x_res = ucb1x00_ts_read_xres(ts);
	310	ts->y_res = ucb1x00_ts_read_yres(ts);
	311	ucb1x00_adc_disable(ts->ucb);
	312
5437775e PM	313	ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd");
5437775e PM	314	if (!IS_ERR(ts->rtask)) {
acb45439 RK	315	ret = 0;
	316	} else {
	317	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
5437775e PM	318	ts->rtask = NULL;
5437775e PM	319	ret = -EFAULT;
acb45439 RK	320	}
	321
	322	out:
acb45439 RK	323	return ret;
	324	}
	325
	326	/*
	327	* Release touchscreen resources. Disable IRQs.
	328	*/
	329	static void ucb1x00_ts_close(struct input_dev *idev)
	330	{
1393c3ed	331	struct ucb1x00_ts *ts = idev->private;
acb45439	332
5437775e PM	333	if (ts->rtask)
5437775e PM	334	kthread_stop(ts->rtask);
acb45439	335
5437775e PM	336	ucb1x00_enable(ts->ucb);
	337	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
	338	ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
	339	ucb1x00_disable(ts->ucb);
acb45439 RK	340	}
	341
	342	#ifdef CONFIG_PM
	343	static int ucb1x00_ts_resume(struct ucb1x00_dev *dev)
	344	{
	345	struct ucb1x00_ts *ts = dev->priv;
	346
	347	if (ts->rtask != NULL) {
	348	/*
	349	* Restart the TS thread to ensure the
	350	* TS interrupt mode is set up again
	351	* after sleep.
	352	*/
	353	ts->restart = 1;
	354	wake_up(&ts->irq_wait);
	355	}
	356	return 0;
	357	}
	358	#else
	359	#define ucb1x00_ts_resume NULL
	360	#endif
	361
	362
	363	/*
	364	* Initialisation.
	365	*/
	366	static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
	367	{
	368	struct ucb1x00_ts *ts;
08c67d2a DT	369	struct input_dev *idev;
08c67d2a DT	370	int err;
acb45439	371
bd622663	372	ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
08c67d2a DT	373	idev = input_allocate_device();
	374	if (!ts \|\| !idev) {
	375	err = -ENOMEM;
	376	goto fail;
bd622663	377	}
acb45439 RK	378
acb45439 RK	379	ts->ucb = dev->ucb;
08c67d2a	380	ts->idev = idev;
acb45439	381	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
acb45439	382
08c67d2a DT	383	idev->private = ts;
	384	idev->name = "Touchscreen panel";
	385	idev->id.product = ts->ucb->id;
	386	idev->open = ucb1x00_ts_open;
	387	idev->close = ucb1x00_ts_close;
acb45439	388
08c67d2a DT	389	__set_bit(EV_ABS, idev->evbit);
	390	__set_bit(ABS_X, idev->absbit);
	391	__set_bit(ABS_Y, idev->absbit);
	392	__set_bit(ABS_PRESSURE, idev->absbit);
acb45439	393
08c67d2a DT	394	err = input_register_device(idev);
	395	if (err)
	396	goto fail;
acb45439 RK	397
	398	dev->priv = ts;
	399
	400	return 0;
08c67d2a DT	401
	402	fail:
	403	input_free_device(idev);
	404	kfree(ts);
	405	return err;
acb45439 RK	406	}
	407
	408	static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
	409	{
	410	struct ucb1x00_ts *ts = dev->priv;
bd622663 DT	411
bd622663 DT	412	input_unregister_device(ts->idev);
acb45439 RK	413	kfree(ts);
	414	}
	415
	416	static struct ucb1x00_driver ucb1x00_ts_driver = {
	417	.add = ucb1x00_ts_add,
	418	.remove = ucb1x00_ts_remove,
	419	.resume = ucb1x00_ts_resume,
	420	};
	421
	422	static int __init ucb1x00_ts_init(void)
	423	{
	424	return ucb1x00_register_driver(&ucb1x00_ts_driver);
	425	}
	426
	427	static void __exit ucb1x00_ts_exit(void)
	428	{
	429	ucb1x00_unregister_driver(&ucb1x00_ts_driver);
	430	}
	431
	432	module_param(adcsync, int, 0444);
	433	module_init(ucb1x00_ts_init);
	434	module_exit(ucb1x00_ts_exit);
	435
	436	MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
	437	MODULE_DESCRIPTION("UCB1x00 touchscreen driver");
	438	MODULE_LICENSE("GPL");